OSDN Git Service
Yeongkyoon Lee [Wed, 31 Oct 2012 07:04:23 +0000 (16:04 +0900)]
configure: Add CONFIG_QEMU_LDST_OPTIMIZATION for TCG qemu_ld/st optimization
Enable CONFIG_QEMU_LDST_OPTIMIZATION for TCG qemu_ld/st optimization only when
a host is i386 or x86_64.
Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Mon, 29 Oct 2012 12:05:11 +0000 (12:05 +0000)]
target-m68k/m68k-semi.c: Log when put_user for returning values fails
Abstract out the use of put_user for returning semihosting call results,
so that we can log when a guest erroneously attempts a semihosting call
with an unwritable argument block.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Mon, 29 Oct 2012 12:05:10 +0000 (12:05 +0000)]
target-m68k/m68k-semi: Handle get_user failure
Handle failure of get_user accessing the semihosting
argument block, rather than simply ignoring the failures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Meador Inge [Mon, 29 Oct 2012 12:05:09 +0000 (12:05 +0000)]
m68k: Return semihosting errno values correctly
Fixing a simple typo, s/errno/err/, that caused
the error status from GDB semihosted system calls
to be returned incorrectly.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Paolo Bonzini [Fri, 2 Nov 2012 14:43:24 +0000 (15:43 +0100)]
vl: delay thread initialization after daemonization
Commit
ac4119c (chardev: Use timer instead of bottom-half to postpone
open event, 2012-10-12) moved the alarm timer initialization to an earlier
point but failed to consider that it depends on qemu_init_main_loop.
Later, commit
1c53786 (vl: init main loop earlier, 2012-10-30) fixed
this, but left -daemonize in two different ways. First, timers need to
be reinitialized after forking. Second, the global mutex was being held
by the parent, and thus dropped after forking.
The first is now fixed using pthread_atfork. For the second part,
make sure that the global mutex is not taken before daemonization,
and similarly delay qemu_thread_self.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 2 Nov 2012 14:43:23 +0000 (15:43 +0100)]
vl: unify calls to init_timer_alarm
init_timer_alarm was being called twice. This is not needed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 2 Nov 2012 14:43:22 +0000 (15:43 +0100)]
qemu-timer: reinitialize timers after fork
Timers are not inherited by the child of a fork(2), so just use
pthread_atfork to reinstate them after daemonize.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 2 Nov 2012 14:43:21 +0000 (15:43 +0100)]
semaphore: implement fallback counting semaphores with mutex+condvar
OpenBSD and Darwin do not have sem_timedwait. Implement a fallback
for them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 2 Nov 2012 14:43:20 +0000 (15:43 +0100)]
compiler: support Darwin weak references
Weakrefs only tell you if the symbol was defined elsewhere, so you
need a further check at runtime to pick the default definition
when needed.
This could be automated by the compiler, but it does not do it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 2 Nov 2012 18:06:28 +0000 (13:06 -0500)]
Merge remote-tracking branch 'bonzini/migr-coroutine' into staging
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/migr-coroutine:
migration: move process_incoming_migration to a coroutine
migration: handle EAGAIN while reading QEMUFile
migration: move qemu_fclose to process_incoming_migration
migration: close socket QEMUFile from socket_close
migration: xxx_close will only be called once
migration: use closesocket, not close
migration: use migrate_fd_close in migrate_fd_cleanup
migration: clean up server sockets and handlers before invoking process_incoming_migration
migration: replace qemu_stdio_fd with qemu_get_fd
migration: add qemu_get_fd
migration: consolidate QEMUFile methods in a single QEMUFileOps struct
migration: unify stdio-based QEMUFile operations
Anthony Liguori [Fri, 2 Nov 2012 18:05:38 +0000 (13:05 -0500)]
Merge remote-tracking branch 'afaerber/qom-cpu' into staging
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* afaerber/qom-cpu:
target-i386: cpu: fix --disable-kvm compilation
Paolo Bonzini [Tue, 7 Aug 2012 08:57:43 +0000 (10:57 +0200)]
migration: move process_incoming_migration to a coroutine
The final part of incoming migration, which now consists of
process_incoming_migration for all protocols, is thus made non-blocking.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 7 Aug 2012 09:07:59 +0000 (11:07 +0200)]
migration: handle EAGAIN while reading QEMUFile
This will never happen right now (the assertion would fail). The
next patch will set the socket or pipe in non-blocking mode, thus
enabling this part of the code.
Coroutines can just stop whenever they want with qemu_coroutine_yield.
As soon as select tells the main loop that the migration stream is
readable, the coroutine is re-entered directly in qemu_get_buffer,
where it will read more data and pass it to the loading routines.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 7 Aug 2012 08:51:51 +0000 (10:51 +0200)]
migration: move qemu_fclose to process_incoming_migration
The common suffix is now just process_incoming_migration.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 7 Aug 2012 08:50:26 +0000 (10:50 +0200)]
migration: close socket QEMUFile from socket_close
The common suffix now is process_incoming_migration+qemu_fclose.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 27 Sep 2012 11:30:15 +0000 (13:30 +0200)]
migration: xxx_close will only be called once
No need to test s->fd again, it is tested in the caller.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 27 Sep 2012 11:33:08 +0000 (13:33 +0200)]
migration: use closesocket, not close
Windows requires this. Migration does not quite work under Windows
but let's be uniform across QEMU.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 27 Sep 2012 11:25:45 +0000 (13:25 +0200)]
migration: use migrate_fd_close in migrate_fd_cleanup
migrate_fd_cleanup will usually close the file descriptor via
buffered_file_close's call to migrate_fd_close. However, in the case
of s->file == NULL it is "inlining" migrate_fd_close (almost: there is a
direct close() instead of using s->close(s)). To fix the inconsistency
and clean up the code, allow multiple calls to migrate_fd_close and use
the function in migrate_fd_cleanup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 7 Aug 2012 08:49:13 +0000 (10:49 +0200)]
migration: clean up server sockets and handlers before invoking process_incoming_migration
A first step towards making a common "suffix" for all migration protocols,
and moving it to process_incoming_migration.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 8 Aug 2012 08:21:26 +0000 (10:21 +0200)]
migration: replace qemu_stdio_fd with qemu_get_fd
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 8 Aug 2012 08:20:18 +0000 (10:20 +0200)]
migration: add qemu_get_fd
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 8 Aug 2012 08:15:15 +0000 (10:15 +0200)]
migration: consolidate QEMUFile methods in a single QEMUFileOps struct
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 21 Sep 2012 10:04:03 +0000 (12:04 +0200)]
migration: unify stdio-based QEMUFile operations
Now that qemu_fseek does not exist anymore, there is no reason to do
an fseek before fread/fwrite when operating on an stdio file.
Thus, unify the get/put_buffer callbacks used by qemu_fopen
with those used for pipes.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eduardo Habkost [Fri, 2 Nov 2012 16:25:15 +0000 (14:25 -0200)]
target-i386: cpu: fix --disable-kvm compilation
This fixes the following:
target-i386/cpu.o: In function `kvm_cpu_fill_host':
target-i386/cpu.c:783: undefined reference to `kvm_state'
I didn't notice the problem before because GCC was optimizing the entire
kvm_cpu_fill_host() function out (because all calls are conditional on
kvm_enabled()).
* cpu_x86_fill_model_id() is used only if CONFIG_KVM is set, so #ifdef it
entirely to avoid compiler warnings.
* kvm_cpu_fill_host() should be called only if KVM is enabled, so
use #ifdef CONFIG_KVM around the entire function body.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Peter Maydell [Fri, 2 Nov 2012 14:54:43 +0000 (14:54 +0000)]
ui/cocoa.m: Update to new DisplayChangeListener member names
Commit
a93a4a2 changed the names of some fields in DisplayChangeListener
and broke compilation of the cocoa UI. Update to the new names.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Fri, 2 Nov 2012 07:44:13 +0000 (08:44 +0100)]
xenfb: fix build breakage caused by console cleanup series
Console cleanup series renamed dpy_resize and dpy_update all over the
tree, but hw/xenfb.c was forgotten. Update it too so it builds again.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 1 Nov 2012 19:34:13 +0000 (14:34 -0500)]
Merge remote-tracking branch 'kraxel/usb.69' into staging
* kraxel/usb.69: (31 commits)
usb-redir: Allow redirecting super speed devices to high speed controllers
usb-redir: Allow to attach USB 2.0 devices to 1.1 host controller
usb-redir: Use reject rather the disconnect on bad ep info
usb-redir: Add an usbredir_setup_usb_eps() helper function
usb-redir: Add support for input pipelining
usb-redir: Add support for 32 bits bulk packet length
combined-packet: Add a workaround for Linux usbfs + live migration
usb: Add packet combining functions
uhci: Don't crash on device disconnect
uhci: Add a uhci_handle_td_error() helper function
usb/ehci-pci: add helper to create ich9 usb controllers
usb/ehci-pci: add ich9 00:1a.* variant
usb/ehci-pci: dynamic type generation
uhci: add ich9 00:1a.* variants
uhci: stick irq routing info into UHCIInfo too.
uhci: dynamic type generation
xilinx_zynq: add USB controllers
usb/ehci: add sysbus variant
usb/ehci: split into multiple source files
usb/ehci: Guard definition of EHCI_DEBUG
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 1 Nov 2012 16:14:39 +0000 (11:14 -0500)]
Merge remote-tracking branch 'kraxel/pixman.v3' into staging
* kraxel/pixman.v3: (22 commits)
pixman: drop obsolete fields from DisplaySurface
pixman/vnc: remove dead code.
pixman/vnc: remove rgb_prepare_row* functions
pixman/vnc: use pixman images in vnc.
pixman: switch screendump function.
vga: stop direct access to DisplaySurface fields.
qxl: stop direct access to DisplaySurface fields.
console: don't set PixelFormat alpha fields for 32bpp
console: make qemu_alloc_display static
pixman: add pixman image to DisplaySurface
pixman: helper functions
pixman: windup in configure & makefiles
pixman: add submodule
console: remove DisplayAllocator
console: remove dpy_gfx_fill
vga: fix text mode updating
console: init displaychangelisteners on register
console: untangle gfx & txt updates
console: s/TextConsole/QemuConsole/
console: move set_mouse + cursor_define callbacks
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 1 Nov 2012 16:13:59 +0000 (11:13 -0500)]
Merge remote-tracking branch 'stefanha/net' into staging
* stefanha/net:
e1000: pre-initialize RAH/RAL registers
net: Reject non-netdevs in qmp_netdev_del()
net: use "socket" model name for UDP sockets
e1000: drop check_rxov, always treat RX ring with RDH == RDT as empty
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 1 Nov 2012 16:13:39 +0000 (11:13 -0500)]
Merge remote-tracking branch 'bonzini/threadpool' into staging
* bonzini/threadpool: (39 commits)
raw-win32: implement native asynchronous I/O
raw-posix: move linux-aio.c to block/
raw-win32: add emulated AIO support
raw-posix: rename raw-posix-aio.h, hide unavailable prototypes
raw: merge posix-aio-compat.c into block/raw-posix.c
block: switch posix-aio-compat to threadpool
threadpool: do not take lock in event_notifier_ready
aio: add generic thread-pool facility
qemu-thread: add QemuSemaphore
linux-aio: use event notifiers
aio: clean up now-unused functions
main-loop: use aio_notify for qemu_notify_event
main-loop: use GSource to poll AIO file descriptors
aio: call aio_notify after setting I/O handlers
aio: add aio_notify
aio: make AioContexts GSources
aio: add Win32 implementation
aio: prepare for introducing GSource-based dispatch
aio: add non-blocking variant of aio_wait
aio: test node->deleted before calling io_flush
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 1 Nov 2012 16:12:50 +0000 (11:12 -0500)]
Merge remote-tracking branch 'qemu-kvm/uq/master' into staging
* qemu-kvm/uq/master: (28 commits)
update-linux-headers.sh: Handle new kernel uapi/ directories
target-i386: kvm_cpu_fill_host: use GET_SUPPORTED_CPUID
target-i386: cpu: make -cpu host/check/enforce code KVM-specific
target-i386: make cpu_x86_fill_host() void
Emulate qemu-kvms -no-kvm option
Issue warning when deprecated -tdf option is used
Issue warning when deprecated drive parameter boot=on|off is used
Use global properties to emulate -no-kvm-pit-reinjection
Issue warning when deprecated -no-kvm-pit is used
Use machine options to emulate -no-kvm-irqchip
cirrus_vga: allow configurable vram size
target-i386: Add missing kvm cpuid feature name
i386: cpu: add missing CPUID[EAX=7,ECX=0] flag names
i386: kvm: filter CPUID leaf 7 based on GET_SUPPORTED_CPUID, too
i386: kvm: reformat filter_features_for_kvm() code
i386: kvm: filter CPUID feature words earlier, on cpu.c
i386: kvm: mask cpuid_ext4_features bits earlier
i386: kvm: mask cpuid_kvm_features earlier
i386: kvm: x2apic is not supported without in-kernel irqchip
i386: kvm: set CPUID_EXT_TSC_DEADLINE_TIMER on kvm_arch_get_supported_cpuid()
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 1 Nov 2012 16:12:32 +0000 (11:12 -0500)]
Merge remote-tracking branch 'afaerber/qom-cpu' into staging
* afaerber/qom-cpu: (35 commits)
target-i386: Pass X86CPU to kvm_handle_halt()
target-i386: Pass X86CPU to kvm_get_mp_state()
cpu: Move thread_id to CPUState
cpus: Pass CPUState to run_on_cpu()
target-i386: Pass X86CPU to cpu_x86_inject_mce()
target-i386: Pass X86CPU to kvm_mce_inject()
cpus: Pass CPUState to [qemu_]cpu_has_work()
spapr: Pass PowerPCCPU to hypercalls
spapr: Pass PowerPCCPU to spapr_hypercall()
target-ppc: Pass PowerPCCPU to cpu_ppc_hypercall
target-ppc: Pass PowerPCCPU to powerpc_excp()
xtensa_pic: Pass XtensaCPU to xtensa_ccompare_cb()
cpus: Pass CPUState to qemu_wait_io_event_common()
cpus: Pass CPUState to flush_queued_work()
cpu: Move queued_work_{first,last} to CPUState
cpus: Pass CPUState to qemu_cpu_kick()
target-ppc: Rename kvm_kick_{env => cpu} and pass PowerPCCPU
ppc: Pass PowerPCCPU to {ppc6xx,ppc970,power7,ppc40x,ppce500}_set_irq()
cpus: Pass CPUState to qemu_tcg_init_vcpu()
cpus: Pass CPUState to qemu_tcg_cpu_thread_fn
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Fri, 26 Oct 2012 15:29:38 +0000 (16:29 +0100)]
arm_boot: Change initrd load address to "halfway through RAM"
To avoid continually having to bump the initrd load address
to account for larger kernel images, put the initrd halfway
through RAM. This allows large kernels on new boards with lots
of RAM to work OK, without breaking existing usecases for
boards with only 32MB of RAM.
Note that this change fixes in passing a bug where we were
passing an overly large max_size to load_image_targphys()
for the initrd, which meant that we wouldn't correctly refuse
to load an enormous initrd that didn't actually fit into RAM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Thu, 1 Nov 2012 15:42:49 +0000 (16:42 +0100)]
Merge branch 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
pseries: Cleanup duplications of ics_valid_irq() code
pseries: Clean up inconsistent variable name in xics.c
target-ppc: Extend FPU state for newer POWER CPUs
target-ppc: Rework storage of VPA registration state
Revert "PPC: pseries: Remove hack for PIO window"
Aurelien Jarno [Thu, 1 Nov 2012 15:42:29 +0000 (16:42 +0100)]
Merge branch 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm: (28 commits)
hw/sd.c: add SD card save/load support
vmstate: Add support for saving/loading bitmaps
hw/sd.c: Fix erase for high capacity cards
pflash_cfi01: Fix debug mode printfery
pflash_cfi0x: QOMified
pflash_cfi01: remove unused total_len field
pflash_cfi0x: remove unused base field
hw/versatile_i2c: Use LOG_GUEST_ERROR
hw/arm_l2x0: Use LOG_GUEST_ERROR
hw/arm_sysctl: Use LOG_GUEST_ERROR
hw/armv7m_nvic: Use LOG_GUEST_ERROR and LOG_UNIMP
hw/arm_timer: Use LOG_GUEST_ERROR and LOG_UNIMP
hw/arm_gic: Use LOG_GUEST_ERROR
hw/arm11mpcore: Use LOG_GUEST_ERROR rather than hw_error()
hw/pl190: Use LOG_UNIMP rather than hw_error()
hw/pl110: Use LOG_GUEST_ERROR rather than hw_error()
hw/pl080: Use LOG_GUEST_ERROR and LOG_UNIMP
hw/pl061: Use LOG_GUEST_ERROR
hw/pl050: Use LOG_GUEST_ERROR
hw/exynos4_boards: Don't prematurely explode QEMUMachineInitArgs
...
Hans de Goede [Wed, 31 Oct 2012 12:47:16 +0000 (13:47 +0100)]
usb-redir: Allow redirecting super speed devices to high speed controllers
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Jan Kiszka [Wed, 31 Oct 2012 12:47:15 +0000 (13:47 +0100)]
usb-redir: Allow to attach USB 2.0 devices to 1.1 host controller
This follows the logic of host-linux: If a 2.0 device has no ISO
endpoint and no interrupt endpoint with a packet size > 64, we can
attach it also to an 1.1 host controller. In case the redir server does
not report endpoint sizes, play safe and remove the 1.1 compatibility as
well. Moreover, if we detect a conflicting change in the configuration
after the device was already attached, it will be disconnected
immediately.
HdG: Several small cleanups and fixes
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Wed, 31 Oct 2012 12:47:14 +0000 (13:47 +0100)]
usb-redir: Use reject rather the disconnect on bad ep info
So that the client gets a notification about us disconnecting the device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Wed, 31 Oct 2012 12:47:13 +0000 (13:47 +0100)]
usb-redir: Add an usbredir_setup_usb_eps() helper function
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Wed, 31 Oct 2012 12:47:12 +0000 (13:47 +0100)]
usb-redir: Add support for input pipelining
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Wed, 31 Oct 2012 12:47:11 +0000 (13:47 +0100)]
usb-redir: Add support for 32 bits bulk packet length
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Wed, 31 Oct 2012 12:47:10 +0000 (13:47 +0100)]
combined-packet: Add a workaround for Linux usbfs + live migration
Older versions (anything but the latest) of Linux usbfs + libusb(x),
will submit larger (bulk) transfers split into multiple 16k submissions,
which means that rather then all tds getting linked into the queue in
one atomic operarion they get linked in a bunch at a time, which could
cause problems if:
1) We scan the queue while libusb is in the middle of submitting a split
bulk transfer
2) While this bulk transfer is pending we migrate to another host.
The problem is that after 2, the new host will rescan the queue and
combine the packets in one large transfer, where as 1) has caused the
original host to see them as 2 transfers. This patch fixes this by stopping
combinging if we detect a 16k transfer with its int_req flag set.
This should not adversely effect performance for other cases as:
1) Linux never sets the interrupt flag on packets other then the last
2) Windows does set the in_req flag on each td, but will submit large
transfers in 20k tds thus never triggering the check
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Wed, 31 Oct 2012 12:47:09 +0000 (13:47 +0100)]
usb: Add packet combining functions
Currently we only do pipelining for output endpoints, since to properly
support short-not-ok semantics we can only have one outstanding input
packet. Since the ehci and uhci controllers have a limited per td packet
size guests will split large input transfers to into multiple packets,
and since we don't pipeline these, this comes with a serious performance
penalty.
This patch adds helper functions to (re-)combine packets which belong to 1
transfer at the guest device-driver level into 1 large transger. This can be
used by (redirection) usb-devices to enable pipelining for input endpoints.
This patch will combine packets together until a transfer terminating packet
is encountered. A terminating packet is a packet which meets one or more of
the following conditions:
1) The packet size is *not* a multiple of the endpoint max packet size
2) The packet does *not* have its short-not-ok flag set
3) The packet has its interrupt-on-complete flag set
The short-not-ok flag of the combined packet is that of the terminating packet.
Multiple combined packets may be submitted to the device, if the combined
packets do not have their short-not-ok flag set, enabling true pipelining.
If a combined packet does have its short-not-ok flag set the queue will
wait with submitting further packets to the device until that packet has
completed.
Once enabled in the usb-redir and ehci code, this improves the speed (MB/s)
of a Linux guest reading from a USB mass storage device by a factor of
1.2 - 1.5.
And the main reason why I started working on this, when reading from a pl2303
USB<->serial converter, it combines the previous 4 packets submitted per
device-driver level read into 1 big read, reducing the number of packets / sec
by a factor 4, and it allows to have multiple reads outstanding. This allows
for much better latency tolerance without the pl2303's internal buffer
overflowing (which was happening at 115200 bps, without serial flow control).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Wed, 31 Oct 2012 11:54:37 +0000 (12:54 +0100)]
uhci: Don't crash on device disconnect
My recent uhci cleanup series has introduced a regression, where
qemu sometimes crashes on a device disconnect. The problem is that
the uhci code never checked for a device not / no longer existing, instead
it was relying on usb_handle_packet accepting a NULL device.
But since we now pass usb_handle_packet q->ep->dev, rather then just
a local dev variable, we crash as q->ep == NULL due to the device no longer
existing.
This patch fixes this. Note that this patch also improves over
the old behavior were we would:
1) create a queue for the device
2) create an async for the packet
3) have usb_handle_packet fail
4) destroy the async
5) wait for the queue to be idle for 32 frames
6) destroy the queue
Which was rather sub-optimal.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Wed, 31 Oct 2012 11:54:36 +0000 (12:54 +0100)]
uhci: Add a uhci_handle_td_error() helper function
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 30 Oct 2012 12:18:36 +0000 (13:18 +0100)]
usb/ehci-pci: add helper to create ich9 usb controllers
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 30 Oct 2012 12:17:46 +0000 (13:17 +0100)]
usb/ehci-pci: add ich9 00:1a.* variant
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 30 Oct 2012 11:53:17 +0000 (12:53 +0100)]
usb/ehci-pci: dynamic type generation
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 30 Oct 2012 08:57:28 +0000 (09:57 +0100)]
uhci: add ich9 00:1a.* variants
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 26 Oct 2012 12:56:19 +0000 (14:56 +0200)]
uhci: stick irq routing info into UHCIInfo too.
Kills the ugly "switch (device_id) { ... }" struct and makes it easier
to figure what the differences between the uhci variants are.
Need our own DeviceClass struct for that so we can allocate some space
to store UHCIInfo.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 25 Oct 2012 14:22:57 +0000 (16:22 +0200)]
uhci: dynamic type generation
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Crosthwaite [Mon, 29 Oct 2012 01:34:38 +0000 (11:34 +1000)]
xilinx_zynq: add USB controllers
Add the two usb controllers in Zynq.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 10 Oct 2012 09:15:52 +0000 (11:15 +0200)]
pixman: drop obsolete fields from DisplaySurface
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 11 Oct 2012 10:11:27 +0000 (12:11 +0200)]
pixman/vnc: remove dead code.
Switching the vnc server framebuffer to use 32bpp unconditionally
turns the code bits which handle 8 and 16 bpp into dead code.
Remove them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 11 Oct 2012 10:04:33 +0000 (12:04 +0200)]
pixman/vnc: remove rgb_prepare_row* functions
Let pixman do it instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 10 Oct 2012 11:29:43 +0000 (13:29 +0200)]
pixman/vnc: use pixman images in vnc.
The vnc code uses *three* DisplaySurfaces:
First is the surface of the actual QemuConsole, usually the guest
screen, but could also be a text console (monitor/serial reachable via
Ctrl-Alt-<nr> keys). This is left as-is.
Second is the current server's view of the screen content. The vnc code
uses this to figure which parts of the guest screen did _really_ change
to reduce the amount of updates sent to the vnc clients. It is also
used as data source when sending out the updates to the clients. This
surface gets replaced by a pixman image. The format changes too,
instead of using the guest screen format we'll use fixed 32bit rgb
framebuffer and convert the pixels on the fly when comparing and
updating the server framebuffer.
Third surface carries the format expected by the vnc client. That isn't
used to store image data. This surface is switched to PixelFormat and a
boolean for bigendian byte order.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 10 Oct 2012 11:12:58 +0000 (13:12 +0200)]
pixman: switch screendump function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 10 Oct 2012 11:05:05 +0000 (13:05 +0200)]
vga: stop direct access to DisplaySurface fields.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 10 Oct 2012 11:02:14 +0000 (13:02 +0200)]
qxl: stop direct access to DisplaySurface fields.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 10 Oct 2012 09:16:26 +0000 (11:16 +0200)]
console: don't set PixelFormat alpha fields for 32bpp
Currently it is inconstent, PixelFormat->amask is left unset whereas
abits and amax and ashift are filled. As an alpha channel doesn't make
sense for the vga framebuffer leave all alpha fields clear.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 27 Sep 2012 09:06:36 +0000 (11:06 +0200)]
console: make qemu_alloc_display static
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 26 Sep 2012 13:20:05 +0000 (15:20 +0200)]
pixman: add pixman image to DisplaySurface
Surfaces are now allocated using pixman. DisplaySurface gets new
struct fields with pixman image and data. DisplayChangeListeners
can easily start using pixman now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 25 Sep 2012 14:23:24 +0000 (16:23 +0200)]
pixman: helper functions
Add some helper functions which will be put
into use by following patches.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 25 Sep 2012 14:04:58 +0000 (16:04 +0200)]
pixman: windup in configure & makefiles
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 30 Oct 2012 14:08:37 +0000 (15:08 +0100)]
usb/ehci: add sysbus variant
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 30 Oct 2012 11:20:06 +0000 (12:20 +0100)]
usb/ehci: split into multiple source files
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Crosthwaite [Mon, 29 Oct 2012 01:34:39 +0000 (11:34 +1000)]
usb/ehci: Guard definition of EHCI_DEBUG
Guard against re-definition of EHCI_DEBUG. Allows for turning on of debug info
from configure (using --qemu-extra-cflags="-DEHCI_DEBUG=1") rather than source
code hacking.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Crosthwaite [Mon, 29 Oct 2012 01:34:36 +0000 (11:34 +1000)]
usb/ehci: seperate out PCIisms
Seperate the PCI stuff from the EHCI components. Extracted the PCIDevice
out into a new wrapper struct to make EHCIState non-PCI-specific. Seperated
tho non PCI init component out into a seperate "common" init function.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Crosthwaite [Mon, 29 Oct 2012 01:34:35 +0000 (11:34 +1000)]
usb/ehci: Abstract away PCI DMA API
Pull the DMAContext for the PCI DMA out at device init time and put it into
the device state. Use dma_memory_read/write() instead of pci specific versions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Crosthwaite [Mon, 29 Oct 2012 01:34:34 +0000 (11:34 +1000)]
usb/ehci: parameterise the register region offsets
The capabilities register and operational register offsets can vary from one
EHCI implementation to the next. Parameterise accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 26 Oct 2012 11:09:56 +0000 (13:09 +0200)]
xhci: allow address slot being called multiple times
win8 guests do that for some reason ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 26 Oct 2012 09:49:06 +0000 (11:49 +0200)]
xhci: add port trace points
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 26 Oct 2012 08:30:53 +0000 (10:30 +0200)]
xhci: set pls in xhci_port_update & xhci_port_reset
Set the port link state to the correct values in xhci_port_update and
xhci_port_reset functions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 26 Oct 2012 08:22:37 +0000 (10:22 +0200)]
xhci: add xhci_port_reset
Move port reset logic to its own function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 26 Oct 2012 08:19:02 +0000 (10:19 +0200)]
xhci: add xhci_port_notify
Create a function to notify the guest about port
status changes and put it into use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 26 Oct 2012 08:15:47 +0000 (10:15 +0200)]
xhci: add xhci_port_have_device
Factor out the code which checks whenever a usb device is attached
to the port in question. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 26 Oct 2012 08:13:13 +0000 (10:13 +0200)]
xhci: s/xhci_update_port/xhci_port_update/
Rename the function for xhci_port_* naming scheme, also drop
the xhci parameter as port carries a pointer to xhci anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 26 Oct 2012 08:10:54 +0000 (10:10 +0200)]
xhci: add {get,set}_field macros & enum for pls
Add {get,set}_field macros (simliar to ehci) to read and update
some bits of a word. Put them into use for updating pls (port
link state) values. Also add a enum for pls values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 27 Sep 2012 07:52:35 +0000 (09:52 +0200)]
pixman: add submodule
Add pixman submodule as fallback for old distros.
Picking version 0.18.4. This is shipped by rhel6
and also the minimum version needed by spice so this
should serve well as baseline.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 26 Sep 2012 05:46:20 +0000 (07:46 +0200)]
console: remove DisplayAllocator
Causes [temporary] preformance regression with 24bpp vga modes @ sdl.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 28 Sep 2012 13:31:33 +0000 (15:31 +0200)]
console: remove dpy_gfx_fill
Unused code. 'nuff said.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 9 Oct 2012 15:10:13 +0000 (17:10 +0200)]
vga: fix text mode updating
With both text (curses) and graphics (vnc/sdl/spice/...) display active
vga text mode emulation fails to update both correctly. Depending on
whenever vga_update_text() or vga_draw_text() happens to be called first
only the text display or only the graphics display will see display
resolution changes and full redraws.
Fix it by calling both text/gfx resize functions in both code paths and
keep track of full screen redraws needed in VGACommonState fields.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 28 Sep 2012 13:30:07 +0000 (15:30 +0200)]
console: init displaychangelisteners on register
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 28 Sep 2012 13:02:08 +0000 (15:02 +0200)]
console: untangle gfx & txt updates
Stop abusing displaysurface fields for text mode displays.
(bpp = 0, width = cols, height = lines).
Add flags to displaystate indicating whenever text mode display
(curses) or gfx mode displays (sdl, vnc, ...) are present.
Add separate displaychangelistener callbacks for text / gfx mode
resize & updates.
This allows to enable gfx and txt diplays at the same time and also
paves the way for more cleanups in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 28 Sep 2012 11:24:17 +0000 (13:24 +0200)]
console: s/TextConsole/QemuConsole/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 12 Sep 2012 05:56:45 +0000 (07:56 +0200)]
console: move set_mouse + cursor_define callbacks
When adding DisplayChangeListeners the set_mouse and cursor_define
callbacks have been left in DisplayState for some reason. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 4 Jun 2010 09:51:31 +0000 (11:51 +0200)]
console: add unregister_displaychangelistener
Also change the way the gui_timer is initialized: each time a
displaychangelistener is registered or unregistered we'll check
whether we need a timer (due to dpy_refresh callback being present)
and if so setup a timer, otherwise zap it. This way the gui timer
works correctly with displaychangelisteners coming and going.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 4 Jun 2010 09:46:35 +0000 (11:46 +0200)]
console: QLIST-ify display change listeners.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
David Gibson [Mon, 29 Oct 2012 17:25:02 +0000 (17:25 +0000)]
pseries: Cleanup duplications of ics_valid_irq() code
A couple of places in xics.c open-coded the same logic as is already
implemented in ics_valid_irq(). This patch fixes the code duplication.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Mon, 29 Oct 2012 17:25:00 +0000 (17:25 +0000)]
pseries: Clean up inconsistent variable name in xics.c
Throughout xics.c 'nr' is used to refer to a global interrupt number, and
'server' is used to refer to an interrupt server number (i.e. CPU number).
Except in icp_set_mfrr(), where 'nr' is used as a server number. Fix this
confusing inconsistency.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Mon, 29 Oct 2012 17:24:59 +0000 (17:24 +0000)]
target-ppc: Extend FPU state for newer POWER CPUs
This patch adds some extra FPU state to CPUPPCState. Specifically,
fpscr is extended to a target_ulong bits, since some recent (64 bit)
CPUs now have more status bits than fit inside 32 bits. Also, we add
the 32 VSR registers present on CPUs with VSX (these extend the
standard FP regs, which together with the Altivec/VMX registers form a
64 x 128bit register file for VSX).
We don't actually support the instructions using these extra registers
in TCG yet, but we still need a place to store the state so we can
sync it with KVM and savevm/loadvm it. This patch updates the savevm
code to not fail on the extended state, but also does not actually
save it - that's a project for another patch.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Mon, 29 Oct 2012 17:24:58 +0000 (17:24 +0000)]
target-ppc: Rework storage of VPA registration state
We change the storage of the VPA information to explicitly use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix commit message]
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Mon, 29 Oct 2012 17:24:57 +0000 (17:24 +0000)]
Revert "PPC: pseries: Remove hack for PIO window"
This reverts commit
a178274efabcbbc5d44805b51def874e47051325.
Contrary to that commit's message, the users of old_portio are not all
gone. In particular VGA still uses it via portio_list_add().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Gabriel L. Somlo [Wed, 31 Oct 2012 18:15:39 +0000 (14:15 -0400)]
e1000: pre-initialize RAH/RAL registers
Some guest operating systems' drivers (Mac OS X in particular) fail to
properly initialize the Receive Address registers (probably expecting
them to be pre-initialized by an earlier component, such as a specific
proprietary BIOS). This patch pre-initializes the RA registers, allowing
OS X networking to function properly. Other guest operating systems are
not affected, and free to (re)initialize these registers during boot.
[According to the datasheet the Address Valid bits in the RA registers
are cleared on PCI or software reset. This patch adds the NIC's MAC
address and sets Address Valid on reset. So we diverge from real
hardware behavior here. -- Stefan]
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 24 Oct 2012 12:34:12 +0000 (14:34 +0200)]
net: Reject non-netdevs in qmp_netdev_del()
The netdev_del command crashes when given a -net device, because it
calls qemu_opts_del(NULL).
Check that this is a -netdev before attempting to delete it and the
QemuOpts.
Note the subtle change from qemu_find_opts_err("netdev", errp) to
qemu_find_opts_err("netdev", NULL). Since "netdev" is a built in
options group and we don't check for NULL return anyway, there's no use
in passing errp here.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lei Li [Thu, 1 Nov 2012 09:39:55 +0000 (17:39 +0800)]
net: use "socket" model name for UDP sockets
Fix the problem that can not delete the udp socket.
It's caused by passing "udp" model to net_socket_udp_init,
but we do not have "udp" model in our model list.
Pass the right model "socket" to init function.
https://bugs.launchpad.net/qemu/+bug/
1073585?comments=all
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Dmitry Fleytman [Fri, 19 Oct 2012 05:56:55 +0000 (07:56 +0200)]
e1000: drop check_rxov, always treat RX ring with RDH == RDT as empty
Real HW always treats RX ring with RDH == RDT as empty.
Emulation is supposed to behave the same.
Reported-by: Chris Webb <chris.webb@elastichosts.com>
Reported-by: Richard Davies <richard.davies@elastichosts.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:21 +0000 (21:53 +0200)]
target-mips: don't flush extra TLB on permissions upgrade
If the guest uses a TLBWI instruction for upgrading permissions, we
don't need to flush the extra TLBs. This improve boot time performance
by about 10%.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:21 +0000 (21:53 +0200)]
target-mips: fix TLBR wrt SEGMask
Like r4k_map_address(), r4k_helper_tlbp() should use SEGMask to mask the
address.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Tue, 9 Oct 2012 19:53:21 +0000 (21:53 +0200)]
target-mips: use deposit instead of hardcoded version
Use the deposit op instead of and hardcoded bit field insertion. It
allows the host to emit the corresponding instruction if available.
At the same time remove the (lsb > msb) test. The MIPS64R2 instruction
set manual says "Because of the instruction format, lsb can never be
greater than msb, so there is no UNPREDICATABLE case for this
instruction."
(Bug reported as LP:
1071149.)
Cc: Никита Канунников <n.kanunnikov@sbtcom.ru>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>