OSDN Git Service
Claudio Takahasi [Fri, 11 Feb 2011 21:28:54 +0000 (19:28 -0200)]
Bluetooth: Add LE signaling commands handling
This patch splits the L2CAP command handling function in order to
have a clear separation between the commands related to BR/EDR and
LE. Commands and responses in the LE signaling channel are not being
handled yet, command reject is sent to all received requests. Bluetooth
Core Specification, Volume 3, Part A, section 4 defines the signaling
packets formats and allowed commands/responses over the LE signaling
channel.
Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Mon, 14 Feb 2011 21:53:43 +0000 (18:53 -0300)]
Bluetooth: Use usb_fill_int_urb()
Instead set urb structure directly we call usb_fill_int_urb() to set the
values to us.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ville Tervo [Fri, 11 Feb 2011 01:38:54 +0000 (22:38 -0300)]
Bluetooth: Add SMP command structures
Add command structures for security manager protocol.
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ville Tervo [Fri, 11 Feb 2011 01:38:53 +0000 (22:38 -0300)]
Bluetooth: Treat LE and ACL links separately on timeout
Separate LE and ACL timeouts. Othervise ACL connections
on non LE hw will time out after 45 secs.
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Vinicius Costa Gomes [Fri, 11 Feb 2011 01:38:52 +0000 (22:38 -0300)]
Bluetooth: Fix initiated LE connections
Fix LE connections not being marked as master.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ville Tervo [Fri, 11 Feb 2011 01:38:51 +0000 (22:38 -0300)]
Bluetooth: Do not send disconn comand over LE links
l2cap over LE links can be disconnected without sending
disconnect command first.
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ville Tervo [Fri, 11 Feb 2011 01:38:50 +0000 (22:38 -0300)]
Bluetooth: Add server socket support for LE connection
Add support for LE server sockets.
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ville Tervo [Fri, 11 Feb 2011 01:38:49 +0000 (22:38 -0300)]
Bluetooth: Add LE connection support to L2CAP
Add basic LE connection support to L2CAP. LE
connection can be created by specifying cid
in struct sockaddr_l2
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ville Tervo [Fri, 11 Feb 2011 01:38:48 +0000 (22:38 -0300)]
Bluetooth: Use LE buffers for LE traffic
Bluetooth chips may have separate buffers for LE traffic.
This patch add support to use LE buffers provided by the chip.
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ville Tervo [Fri, 11 Feb 2011 01:38:47 +0000 (22:38 -0300)]
Bluetooth: Add LE connect support
Bluetooth V4.0 adds support for Low Energy (LE) connections.
Specification introduces new set of hci commands to control LE
connection. This patch adds logic to create, cancel and disconnect
LE connections.
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ville Tervo [Fri, 11 Feb 2011 01:38:46 +0000 (22:38 -0300)]
Bluetooth: Add low energy commands and events
Add needed HCI command and event structs to
create LE connections.
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Thu, 10 Feb 2011 16:16:06 +0000 (14:16 -0200)]
Bluetooth: Add L2CAP mode to debugfs output
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Mon, 7 Feb 2011 22:19:30 +0000 (20:19 -0200)]
Bluetooth: remove l2cap_load() hack
l2cap_load() was added to trigger l2cap.ko module loading from the RFCOMM
and BNEP modules. Now that L2CAP module is gone, we don't need it anymore.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Mon, 7 Feb 2011 22:08:52 +0000 (20:08 -0200)]
Bluetooth: Merge L2CAP and SCO modules into bluetooth.ko
Actually doesn't make sense have these modules built separately.
The L2CAP layer is needed by almost all Bluetooth protocols and profiles.
There isn't any real use case without having L2CAP loaded.
SCO is only essential for Audio transfers, but it is so small that we can
have it loaded always in bluetooth.ko without problems.
If you really doesn't want it you can disable SCO in the kernel config.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Vasiliy Kulikov [Mon, 14 Feb 2011 10:54:26 +0000 (13:54 +0300)]
Bluetooth: sco: fix information leak to userspace
struct sco_conninfo has one padding byte in the end. Local variable
cinfo of type sco_conninfo is copied to userspace with this uninizialized
one byte, leading to old stack contents leak.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Vasiliy Kulikov [Mon, 14 Feb 2011 10:54:31 +0000 (13:54 +0300)]
Bluetooth: bnep: fix buffer overflow
Struct ca is copied from userspace. It is not checked whether the "device"
field is NULL terminated. This potentially leads to BUG() inside of
alloc_netdev_mqs() and/or information leak by creating a device with a name
made of contents of kernel stack.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Bala Shanmugam [Fri, 11 Feb 2011 10:08:53 +0000 (15:38 +0530)]
Bluetooth: Add firmware support for Atheros 3012
Blacklisted AR3012 PID in btusb and added the same
in ath3k to load patch and sysconfig files.
Signed-off-by: Bala Shanmugam <sbalashanmugam@atheros.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Vasiliy Kulikov [Thu, 10 Feb 2011 17:59:42 +0000 (20:59 +0300)]
Bluetooth: l2cap: fix 1 byte infoleak to userspace
Structure l2cap_options has one padding byte between max_tx and
txwin_size fields. This byte in "opts" is copied to userspace
uninitialized.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Rafał Miłecki [Tue, 8 Feb 2011 22:32:17 +0000 (23:32 +0100)]
ssb: extract boardflags2 for SPROMs rev 4 and 5
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Tue, 8 Feb 2011 08:31:58 +0000 (09:31 +0100)]
iwlwifi: fix ack health for WiFi/BT combo devices
Combo devices have TX statistics on different place, because
struct statistics_rx_bt and struct statistics_rx have different
size. User proper values on combo devices instead of random data.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Tue, 8 Feb 2011 08:31:57 +0000 (09:31 +0100)]
iwlwifi: cleanup iwl_good_ack_health
Make ack health code easies to read. Compared to previous
code, we do not print debug messages when expected_ack_cnt_delta == 0
and also do check against negative deltas.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Tue, 8 Feb 2011 08:31:55 +0000 (09:31 +0100)]
iwlwifi: cleanup iwl_recover_from_statistics
No functional change, make recover from statistics code
easies to read.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Steve Brown [Tue, 8 Feb 2011 00:10:39 +0000 (17:10 -0700)]
ath9k: Remove redundant beacon_interval
The variable appears in both ath_softc and ath_beacon_config.
The struct ath_beacon_config is embedded in ath_softc. The redundant
variable was added by commit id
57c4d7b4c4986037be51476b8e3025d5ba18d8b8.
Signed-off-by: Steve Brown <sbrown@cortland.com>
Reviewed-by: Mohammed Shafi <shafi.ath9k@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ben Greear [Mon, 7 Feb 2011 21:44:38 +0000 (13:44 -0800)]
mac80211: Ensure power-level set properly for scanning.
My previous patch to optimize scanning on operating channel
accidentally removed the code that would ensure power was
set to maximum for scanning.
This patch re-adds that functionality.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ben Greear [Mon, 7 Feb 2011 21:44:37 +0000 (13:44 -0800)]
ath9k: Add debug info for configuring power level.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ben Greear [Mon, 7 Feb 2011 21:44:36 +0000 (13:44 -0800)]
mac80211: Allow work items to use existing channel type.
Narrow channel types can function within larger channel types.
So, use existing channel type for work items when possible.
This decreases hardware channel changes significantly when
using non NO_HT channel types on the operating channel.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ben Greear [Mon, 7 Feb 2011 21:44:35 +0000 (13:44 -0800)]
mac80211: Allow scanning on existing channel-type.
Previous code set the channel type to NO_HT, but it
appears that NO_HT packets can be sent on any channel
type, so we do not need to change the channel type
as long as the channel is correct.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ben Greear [Mon, 7 Feb 2011 21:44:34 +0000 (13:44 -0800)]
mac80211: Properly set work-item channel-type.
Some were indirectly set to NO_HT (zero), but I think
it's better to explicitly set it in case the enum ever
changes. In cfg.c, it seems the channel-type was just
ignored (and thus always set to NO_HT).
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ben Greear [Mon, 7 Feb 2011 21:44:33 +0000 (13:44 -0800)]
ath9k: Print channel-type in chan-change dbg message.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Wed, 9 Feb 2011 20:44:17 +0000 (15:44 -0500)]
Merge branch 'for-linville' of git://git./linux/kernel/git/luca/wl12xx
Eliad Peller [Wed, 2 Feb 2011 07:59:37 +0000 (09:59 +0200)]
wl12xx: set supported_rates after association
Instead of looking for supported_rates change on every tx packet,
just extract the supported_rates after association completes (station only).
Remove wl1271.sta_rate_set and WL1271_FLAG_STA_RATES_CHANGED which are
not used anymore.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Wed, 2 Feb 2011 07:59:36 +0000 (09:59 +0200)]
wl12xx: use the conf struct instead of macros for memory configuration
make the configuration management more flexible by using the
conf struct, rather than predefined macros.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Wed, 2 Feb 2011 07:59:35 +0000 (09:59 +0200)]
wl12xx: move to new firmware (6.1.3.50.49)
This patch adds support for the new wl12xx firmware (Rev 6.1.3.50.49)
Since this fw is not backward compatible with previous fw versions,
a new fw (with different name) is being fetched.
(the patch is big because it contains all the required fw api changes.
splitting it into multiple patches will result in corrupted intermediate
commits)
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Wed, 2 Feb 2011 07:59:34 +0000 (09:59 +0200)]
wl12xx: mcp2.5 - add config_ps acx
mcp2.5 uses this acx to configure the fw only once, rather than
passing the params in every enter psm command.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Gustavo F. Padovan [Mon, 7 Feb 2011 21:15:43 +0000 (19:15 -0200)]
Bluetooth: update Bluetooth daemon name in Kconfig help
Change hcid to bluetoothd.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 05:35:20 +0000 (03:35 -0200)]
Bluetooth: move __l2cap_sock_close() to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 05:26:01 +0000 (03:26 -0200)]
Bluetooth: move l2cap_sock_kill() to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 05:23:31 +0000 (03:23 -0200)]
Bluetooth: move L2CAP sock timers function to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 05:20:52 +0000 (03:20 -0200)]
Bluetooth: move l2cap_sock_sendmsg() to l2cap_sock.c
Also moves some L2CAP sending functions declaration to l2cap.h
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 05:08:36 +0000 (03:08 -0200)]
Bluetooth: move l2cap_sock_shutdown() to l2cap_sock.c
Declare __l2cap_wait_ack() and l2cap_sock_clear_timer() in l2cap.h
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 05:02:31 +0000 (03:02 -0200)]
Bluetooth: move l2cap_sock_recvmsg() to l2cap_sock.c
It causes the move of the declaration of 3 functions to l2cap.h:
l2cap_get_ident(), l2cap_send_cmd(), l2cap_build_conf_req()
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 04:56:13 +0000 (02:56 -0200)]
Bluetooth: move l2cap_sock_connect() to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 04:52:55 +0000 (02:52 -0200)]
Bluetooth: move l2cap_sock_getsockopt() to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 04:48:48 +0000 (02:48 -0200)]
Bluetooth: move l2cap_sock_setsockopt() to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 04:43:46 +0000 (02:43 -0200)]
Bluetooth: move l2cap_sock_getname() to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 04:42:23 +0000 (02:42 -0200)]
Bluetooth: move l2cap_sock_accept() to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 04:40:28 +0000 (02:40 -0200)]
Bluetooth: move l2cap_sock_bind()/listen() to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 04:36:42 +0000 (02:36 -0200)]
Bluetooth: move l2cap_sock_release() to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Fri, 4 Feb 2011 04:33:56 +0000 (02:33 -0200)]
Bluetooth: move l2cap_sock_ops to l2cap_sock.c
First step to move all l2cap_sock_ops function to l2cap_sock.c
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Thu, 3 Feb 2011 22:50:35 +0000 (20:50 -0200)]
Bluetooth: Initial work for L2CAP split.
This patch tries to do the minimal to move l2cap_sock_create() and its
dependencies to l2cap_sock.c. It create a API to initialize and cleanup
the L2CAP sockets from l2cap_core.c through l2cap_init_sockets() and
l2cap_cleanup_sockets().
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Thu, 3 Feb 2011 20:58:10 +0000 (18:58 -0200)]
Bluetooth: Rename l2cap.c to l2cap_core.c
In a preparation to the the L2CAP code split in many files.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Rogério Brito [Thu, 3 Feb 2011 03:42:05 +0000 (01:42 -0200)]
Bluetooth: ath3k: Avoid duplication of code
In commit
86e09287e4f8c81831b4d4118a48597565f0d21b, to reduce memory
usage, the functions of the ath3k module were rewritten to release the
firmware blob after it has been loaded (successfully or not).
The resuting code has some redundancy and the compiler can potentially
produce better code if we omit a function call that is unconditionally
executed in
,----
| if (ath3k_load_firmware(udev, firmware)) {
| release_firmware(firmware);
| return -EIO;
| }
| release_firmware(firmware);
|
| return 0;
| }
`----
It may also be argued that the rewritten code becomes easier to read,
and also to see the code coverage of the snippet in question.
Signed-off-by: Rogério Brito <rbrito@ime.usp.br>
Cc: Alexander Holler <holler@ahsoftware.de>
Cc: "Gustavo F. Padovan" <padovan@profusion.mobi>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Andrei Emeltchenko [Mon, 24 Jan 2011 08:53:24 +0000 (10:53 +0200)]
Bluetooth: fix crash by disabling tasklet in sock accept
Crash can happen when tasklet handling connect/disconnect requests
preempts socket accept. Can be reproduced with "l2test -r" on one
side and several "l2test -c -b 1000 -i hci0 -P 10 <bdaddr>" on the
other side.
disable taskets in socket accept and change lock_sock and release_sock
to bh_lock_sock and bh_unlock_sock since we have to use spinlocks and
there is no need to mark sock as owned by user.
...
[ 3555.897247] Unable to handle kernel NULL pointer dereference at virtual
address
000000bc
[ 3555.915039] pgd =
cab9c000
[ 3555.917785] [
000000bc] *pgd=
8bf3d031, *pte=
00000000, *ppte=
00000000
[ 3555.928314] Internal error: Oops: 17 [#1] PREEMPT
[ 3555.999786] CPU: 0 Not tainted (
2.6.32.21-13874-g67918ef #65)
...
[ 3556.005981] PC is at bt_accept_unlink+0x20/0x58 [bluetooth]
[ 3556.011627] LR is at bt_accept_dequeue+0x3c/0xe8 [bluetooth]
...
[ 3556.161285] [<
bf0007fc>] (bt_accept_unlink+0x20/0x58 [bluetooth]) from
[<
bf000870>] (bt_accept_dequeue+0x3c/0xe8 [bluetooth])
[ 3556.172729] [<
bf000870>] (bt_accept_dequeue+0x3c/0xe8 [bluetooth]) from
[<
bf324df8>] (l2cap_sock_accept+0x100/0x15c [l2cap])
[ 3556.184082] [<
bf324df8>] (l2cap_sock_accept+0x100/0x15c [l2cap]) from
[<
c026a0a8>] (sys_accept4+0x120/0x1e0)
[ 3556.193969] [<
c026a0a8>] (sys_accept4+0x120/0x1e0) from [<
c002c9a0>]
(ret_fast_syscall+0x0/0x2c)
[ 3556.202819] Code:
e5813000 e5901164 e580c160 e580c15c (
e1d13bbc)
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Andrei Emeltchenko [Tue, 11 Jan 2011 15:20:20 +0000 (17:20 +0200)]
Bluetooth: Do not use assignments in IF conditions
Fix checkpatch warnings concerning assignments in if conditions.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Tue, 25 Jan 2011 11:28:33 +0000 (13:28 +0200)]
Bluetooth: Add set_io_capability management command
This patch adds a new set_io_capability management command which is used
to set the IO capability for Secure Simple Pairing (SSP) as well as the
Security Manager Protocol (SMP). The value is per hci_dev and each
hci_conn object inherits it upon creation.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Sat, 22 Jan 2011 04:10:07 +0000 (06:10 +0200)]
Bluetooth: Add support for PIN code handling in the management interface
This patch adds the necessary commands and events needed to communicate
PIN code related actions between the kernel and userspace. This includes
a pin_code_request event as well as pin_code_reply and
pin_code_negative_reply commands.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Sat, 22 Jan 2011 04:46:43 +0000 (06:46 +0200)]
Bluetooth: Create common cmd_complete function for mgmt.c
A lot of management code needs to generate command complete events so it
makes sense to have a helper function for this.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Fri, 21 Jan 2011 11:56:35 +0000 (13:56 +0200)]
Bluetooth: Add get_connections managment interface command
This patch adds a get_connections command to the management interface.
With this command userspace can get the current list of connected
devices. Typically this command would only be used once when enumerating
existing adapters. After that the connected and disconnected events are
used to track connections.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Sat, 22 Jan 2011 04:09:08 +0000 (06:09 +0200)]
Bluetooth: Add support for connect failed management event
This patch add a new connect failed management event to track failures
in connecting to remote devices. It is particularly useful for security
mode 3 scenarios when we don't have a connected state while pairing but
still need to detect when the connect attempt failed.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Thu, 20 Jan 2011 10:40:27 +0000 (12:40 +0200)]
Bluetooth: Add disconnect managment command
This patch adds a disconnect command to the managment interface. Using
this command user space is able to force the disconnection of connected
devices. The command maps directly to the Disconnect HCI command.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Thu, 20 Jan 2011 10:34:39 +0000 (12:34 +0200)]
Bluetooth: Add connected/disconnected management events
This patch adds connected and disconnected managment events to track the
connection status to remote devices. The events map directly to
successful connection complete and disconnection complete HCI events for
ACL links.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Mon, 17 Jan 2011 12:41:05 +0000 (14:41 +0200)]
Bluetooth: Implement link key handling for the management interface
This patch adds a management commands to feed the kernel with all stored
link keys as well as remove specific ones or all of them. Once the
load_keys command has been called the kernel takes over link key
replies. A new_key event is also added to inform userspace of newly
created link keys that should be stored permanently.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Thu, 13 Jan 2011 19:56:52 +0000 (21:56 +0200)]
Bluetooth: Add class of device control to the management interface
This patch adds the possibility for user space to fully control the
Class of Device value of local adapters. To control the service class
bits each UUID that's added comes with a service class "hint" which acts
as a mask of bits that the UUID needs to have enabled. The
set_service_cache management command is used to make sure we queue up
all UUID changes as user space initializes its drivers and then send a
single HCI_Write_Class_of_Device command when initialization is
complete.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Mon, 24 Jan 2011 23:19:58 +0000 (01:19 +0200)]
Bluetooth: Implement a more complete adapter initialization sequence
Using the managment interface means that user space doesn't need to do
any HCI command sending at all. This patch moves the remaining
initialization commands from user space to the kernel side. The patch
makes use of the new feature of __hci_request which allows the request
to be dynamically modified while it is ongoing (something that is needed
to react appropriately to the local features and the version of the
adapter).
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Mon, 10 Jan 2011 12:28:45 +0000 (14:28 +0200)]
Bluetooth: Remove page timeout setting from HCI init sequence
User space should set the page timeout so there's no need to explicitly
set it in the HCI init sequence. Even if user space fails to set it the
controller default value will be used.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Mon, 10 Jan 2011 11:44:55 +0000 (13:44 +0200)]
Bluetooth: Add controller side link key clearing to hci_init_req
The controller may have link keys in its own memory and these keys could
be used for secure connections. However, since the interface to access
these keys doesn't provide information about the key types (which would
be needed to infer the level of security each key provides) using these
keys is rather useless. Therefore, simply clear the controller side list
in the initialization procedure.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Mon, 10 Jan 2011 11:28:59 +0000 (13:28 +0200)]
Bluetooth: Add special handling with __hci_request and HCI_INIT
To support a more dynamic HCI initialization sequence the __hci_request
behavior requires some more changes. Particularly, the init sequence
should be able to have conditionals in it (sending some HCI commands
depending on the outcome of a previous command) instead of being a fixed
list as it is right now.
The reasons for these additional requirements are the moving all
previously user space driven initialization commands to the kernel side
as well as the support the Low Energy controllers.
To fulfull these requirements the init sequence is made the only special
case for multi-command requests and req_last_cmd is renamed to
init_last_cmd. The hci_send_cmd function is changed to update
init_last_cmd as long as the HCI_INIT flag is set.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Tue, 4 Jan 2011 13:40:05 +0000 (15:40 +0200)]
Bluetooth: Reject pairing requests when in non-pairable mode
This patch adds the necessary logic to act accordingly when the
HCI_PAIRABLE flag is not set. In that case PIN code replies as well as
Secure Simple Pairing requests without a NoBonding requirement need to
be rejected.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Tue, 4 Jan 2011 09:39:44 +0000 (11:39 +0200)]
Bluetooth: Implement debugfs support for listing UUIDs
This patch adds a debugfs entry to list the UUIDs that have been
registered through the management interface.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Tue, 4 Jan 2011 10:08:51 +0000 (12:08 +0200)]
Bluetooth: Implement UUID handling through the management interface
This patch adds methods to the management interface for userspace to
notify the kernel of which services have been registered for specific
adapters. This information is needed for setting the appropriate Class
of Device value as well as the Extended Inquiry Response value. This
patch doesn't actually implement setting of these values but just
provides the storage of the UUIDs so the needed functionality can be
built on top of it.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Wed, 26 Jan 2011 11:11:03 +0000 (13:11 +0200)]
Bluetooth: Implement set_pairable managment command
This patch implements a new set_pairable management command to control
the pairable state of local adapters. The state is represented using a
new HCI_PAIRABLE flag in the hci_dev struct.
For backwards compatibility with older user space versions the
HCI_PAIRABLE flag gets automatically set when the existence of an
adapter is reported to user space through legacy methods and the
HCI_MGMT flag is not set.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Wed, 26 Jan 2011 11:07:10 +0000 (13:07 +0200)]
Bluetooth: Add send_mode_rsp convenience function for mgmt.c
Several management commands have similar responses but they are not
always sent asynchronously. To enable synchronous sending (from the
managment command handler function) a send_mode_rsp function is added.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Tue, 4 Jan 2011 09:54:26 +0000 (11:54 +0200)]
Bluetooth: Add flag to track managment controlled adapters
This patch adds a HCI_MGMT flag to track adapters which are under the
control of the management interface. This is needed to make sure that
new kernels will work with old user space versions. I.e. behaviour which
could break old user space versions (but is needed by the management
interface) should not be exhibited when the HCI_MGMT flag is not set.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Wed, 29 Dec 2010 22:38:22 +0000 (00:38 +0200)]
Bluetooth: Unify mode related management messages to a single struct
The powered, connectable and discoverable messages all have the same
format. By using a single struct for all of them a lot of code can be
simplified and reused.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Wed, 29 Dec 2010 22:18:33 +0000 (00:18 +0200)]
Bluetooth: Add set_connectable management command
This patch adds a set_connectable command as well as a corresponding
event to the management interface. It's mainly useful for setting an
adapter as connectable from a non-initialized state as well as setting
an already initialized adapter as non-connectable (mostly useful for
qualification purposes).
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Wed, 29 Dec 2010 14:00:25 +0000 (16:00 +0200)]
Bluetooth: Add support for set_discoverable management command
This patch adds a set_discoverable command to the management interface
as well as the corresponding event. The command is used to control the
discoverable state of adapters.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Thu, 16 Dec 2010 08:17:38 +0000 (10:17 +0200)]
Bluetooth: Add support for set_powered management command
This patch adds a set_powered command to the management interface
through which the powered state of local adapters can be controlled.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Thu, 16 Dec 2010 08:00:37 +0000 (10:00 +0200)]
Bluetooth: Add support for management powered event
This patch adds support for the powered event that's used to indicate to
userspace when the powered state of a local adapter changes.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Johan Hedberg [Wed, 15 Dec 2010 11:53:18 +0000 (13:53 +0200)]
Bluetooth: Implement automatic setup procedure for local adapters
This patch implements automatic initialization of basic information
about newly registered Bluetooth adapters. E.g. the address and features
are always needed so it makes sense for the kernel to automatically
power on adapters and read this information. A new HCI_SETUP flag is
added to track this state.
In order to not consume unnecessary amounts of power if there isn't a
user space available that could switch the adapter back off, a timer is
added to do this automatically as long as no Bluetooth user space seems
to be present. A new HCI_AUTO_OFF flag is added that user space needs to
clear to avoid the automatic power off.
Additionally, the management interface index_added event is moved to the
end of the HCI_SETUP stage so a user space supporting the managment
inteface has all the necessary information available for fetching when
it gets notified of a new adapter. The HCI_DEV_REG event is kept in the
same place as before since existing HCI raw socket based user space
versions depend on seeing the kernels initialization sequence
(hci_init_req) to determine when the adapter is ready for use.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Mon, 24 Jan 2011 18:01:43 +0000 (16:01 -0200)]
Bluetooth: Fix setting of MTU for ERTM and Streaming Mode
The desired MTU should be sent in an Config_Req for all modes.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Andrei Emeltchenko [Mon, 3 Jan 2011 09:14:36 +0000 (11:14 +0200)]
Bluetooth: Use non-flushable by default L2CAP data packets
Modification of Nick Pelly <npelly@google.com> patch.
With Bluetooth 2.1 ACL packets can be flushable or non-flushable. This commit
makes ACL data packets non-flushable by default on compatible chipsets, and
adds the BT_FLUSHABLE socket option to explicitly request flushable ACL
data packets for a given L2CAP socket. This is useful for A2DP data which can
be safely discarded if it can not be delivered within a short time (while
other ACL data should not be discarded).
Note that making ACL data flushable has no effect unless the automatic flush
timeout for that ACL link is changed from its default of 0 (infinite).
Default packet types (for compatible chipsets):
Frame 34: 13 bytes on wire (104 bits), 13 bytes captured (104 bits)
Bluetooth HCI H4
Bluetooth HCI ACL Packet
.... 0000 0000 0010 = Connection Handle: 0x0002
..00 .... .... .... = PB Flag: First Non-automatically Flushable Packet (0)
00.. .... .... .... = BC Flag: Point-To-Point (0)
Data Total Length: 8
Bluetooth L2CAP Packet
After setting BT_FLUSHABLE
(sock.setsockopt(274 /*SOL_BLUETOOTH*/, 8 /* BT_FLUSHABLE */, 1 /* flush */))
Frame 34: 13 bytes on wire (104 bits), 13 bytes captured (104 bits)
Bluetooth HCI H4
Bluetooth HCI ACL Packet
.... 0000 0000 0010 = Connection Handle: 0x0002
..10 .... .... .... = PB Flag: First Automatically Flushable Packet (2)
00.. .... .... .... = BC Flag: Point-To-Point (0)
Data Total Length: 8
Bluetooth L2CAP Packet
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Jesper Juhl [Thu, 13 Jan 2011 23:18:49 +0000 (00:18 +0100)]
Bluetooth: Fix failure to release lock in read_index_list()
If alloc_skb() fails in read_index_list() we'll return -ENOMEM without
releasing 'hci_dev_list_lock'.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Tue, 8 Feb 2011 03:38:50 +0000 (01:38 -0200)]
Merge branch 'master' of git://git./linux/kernel/git/padovan/bluetooth-2.6 into wireless
Dan Carpenter [Mon, 7 Feb 2011 19:03:35 +0000 (22:03 +0300)]
mac80211: remove unneeded check
"ap" is the address of sdata->u.ap so it can never be NULL here. Also
we dereferenced it on the previous line. I removed the check.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohammed Shafi Shajakhan [Mon, 7 Feb 2011 15:38:28 +0000 (21:08 +0530)]
ath9k: Update comments for not parsing DTIM period
Add few comments for not parsing DTIM period from mac80211
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohammed Shafi Shajakhan [Mon, 7 Feb 2011 04:40:04 +0000 (10:10 +0530)]
mac80211: Update comments on radiotap MCS index
mac80211 now supports passing MCS index to radiotap, so update the
comments regarding this
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Sat, 5 Feb 2011 22:48:37 +0000 (23:48 +0100)]
mac80211: as a 4-addr station, do not receive packets for other stations
Since 4-addr frames completely override the source address which will
make it into the converted 802.3 frames, receiving frames for other
4-addr stations will confuse the bridging code.
To be able to handle traffic for all connected devices, the bridge
code will automatically turn on promiscuous mode, which triggers
this problem.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ben Greear [Fri, 4 Feb 2011 23:30:24 +0000 (15:30 -0800)]
mac80211: Make some mlme timers module paramaters.
This allows users to tune the connection-loss algorithms
to be more or less lenient. In particular, larger
null-func retries helps when using lots of virtual
stations on a loaded network.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Nick Kossifidis [Thu, 3 Feb 2011 23:41:02 +0000 (01:41 +0200)]
ath5k: Fix fast channel switching
Fast channel change fixes:
a) Always set OFDM timings
b) Don't re-activate PHY
c) Enable only NF calibration, not AGC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Wey-Yi Guy [Fri, 4 Feb 2011 18:46:41 +0000 (10:46 -0800)]
iwlwifi: fix compiling error with different configuration
When .config has different configuration, it might fail to compile
iwlwifi. fix it
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Johannes Berg [Fri, 4 Feb 2011 14:57:45 +0000 (06:57 -0800)]
iwlwifi: remove unnecessary locking
This code, and the places that set the variable
is_internal_short_scan and the vif pointers are
all protected by the mutex, there's no point in
locking the spinlock here as well (any more).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Ben Greear [Fri, 4 Feb 2011 19:54:17 +0000 (11:54 -0800)]
mac80211: Optimize scans on current operating channel.
This should decrease un-necessary flushes, on/off channel work,
and channel changes in cases where the only scanned channel is
the current operating channel.
* Removes SCAN_OFF_CHANNEL flag, uses SDATA_STATE_OFFCHANNEL
and is-scanning flags instead.
* Add helper method to determine if we are currently configured
for the operating channel.
* Do no blindly go off/on channel in work.c Instead, only call
appropriate on/off code when we really need to change channels.
Always enable offchannel-ps mode when starting work,
and disable it when we are done.
* Consolidate ieee80211_offchannel_stop_station and
ieee80211_offchannel_stop_beaconing, call it
ieee80211_offchannel_stop_vifs instead.
* Accept non-beacon frames when scanning on operating channel.
* Scan state machine optimized to minimize on/off channel
transitions. Also, when going on-channel, go ahead and
re-enable beaconing. We're going to be there for 200ms,
so seems like some useful beaconing could happen.
Always enable offchannel-ps mode when starting software
scan, and disable it when we are done.
* Grab local->mtx earlier in __ieee80211_scan_completed_finish
so that we are protected when calling hw_config(), etc.
* Pass probe-responses up the stack if scanning on local
channel, so that mlme can take a look.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Fri, 4 Feb 2011 19:09:25 +0000 (20:09 +0100)]
ath9k: add additional checks for the baseband hang detection
Since even with the latest changes the false positive issue of the baseband
hang check is not fully solved yet, additional checks are needed.
If the baseband hang occurs, the rx_clear signal will be stuck to high, so
we can use the cycle counters to confirm it.
With this patch, a hardware reset is only triggered if the baseband hang
check returned true three times in a row, with a beacon interval between
each check and if the busy time was also 99% or more during the check
intervals.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Fri, 4 Feb 2011 18:20:08 +0000 (19:20 +0100)]
mac80211: do not send duplicate data frames to the cooked monitor interface
I can't think of a valid use case for this aside from debugging (which can
also be done with a real monitor interface), and dropping these frames saves
some precious CPU cycles.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jouni Malinen [Fri, 4 Feb 2011 11:51:28 +0000 (13:51 +0200)]
ath: Fix clearing of secondary key cache entry for TKIP
All register writes to the key cache have to be done in pairs. However,
the clearing of a separate MIC entry with hardware revisions that use
combined MIC key layout did not do that with one of the registers. Add
the matching register write to the following register to make the KEY4
register write actually complete.
This is mostly a fix for a theoretical issue since the incorrect entry
that could potentially be left behind in the key cache would not match
with received frames. Anyway, better make this code clean the entry
correctly using paired register writes.
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Wed, 2 Feb 2011 17:27:53 +0000 (22:57 +0530)]
mac80211: do not restart ps timer during scan or offchannel
While leaving oper channel, STA informs sleep state to AP to
stop sending data. Till sending ack for the nullfunc, AP
continues to send the data to STA which restarts ps_timer that
is causing unnecessary nullfunc exchange on timer expiry
when the STA was already moved to offchannel. So don't restart ps_timer
on data reception during scan. This issue was identified by
the following warning.
WARNING: at net/mac80211/tx.c:661 invoke_tx_handlers+0xf07/0x1330 [mac80211]
wlan0: Dropped data frame as no usable bitrate found while scanning and
associated. Target station: 00:03:7f:0b:a6:1b on 5 GHz band
Call Trace:
[<
ffffffffa0413ba7>] invoke_tx_handlers+0xf07/0x1330 [mac80211]
[<
ffffffffa0414056>] ieee80211_tx+0x86/0x2c0 [mac80211]
[<
ffffffffa0414345>] ieee80211_xmit+0xb5/0x1d0 [mac80211]
[<
ffffffffa04037e0>] ieee80211_dynamic_ps_enable_work+0x0/0xb0 [mac80211]
[<
ffffffffa04158cf>] ieee80211_tx_skb+0x4f/0x60 [mac80211]
[<
ffffffffa04026e6>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]
[<
ffffffffa0403885>] ieee80211_dynamic_ps_enable_work+0xa5/0xb0 [mac80211]
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jussi Kivilinna [Mon, 31 Jan 2011 18:50:31 +0000 (20:50 +0200)]
zd1211rw: add useful debug output
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jussi Kivilinna [Mon, 31 Jan 2011 18:50:21 +0000 (20:50 +0200)]
zd1211rw: enable NL80211_IFTYPE_AP
It should be safe to enable AP-mode now.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jussi Kivilinna [Mon, 31 Jan 2011 18:50:12 +0000 (20:50 +0200)]
zd1211rw: reset rx urbs after idle period of 30 seconds
RX appears to freeze while idle. Resetting rx-urbs appears to be enough to fix
this. Do reset 30 seconds after last rx.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jussi Kivilinna [Mon, 31 Jan 2011 18:50:02 +0000 (20:50 +0200)]
zd1211rw: reset device when CR_BCN_FIFO_SEMAPHORE freezes in beacon setup
When driver fails to acquire device semaphore lock, device usually
freezes soon afterwards. So failing to acquire lock indicates us that
not everything is going right in device/fw. So reset device when
this happens.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>