OSDN Git Service
Alex Deucher [Wed, 3 Mar 2010 18:39:13 +0000 (13:39 -0500)]
drm/radeon: add new RS880 pci id
This should go to 2.6.33 stable as well.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 2 Mar 2010 23:26:35 +0000 (09:26 +1000)]
vga_switcheroo: disable default y by new rules.
Another undocumented rule of kernel folklore, no default y
config options anymore, apparantly hinting to distros they might
want something isn't preferred anymore.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 2 Mar 2010 23:20:25 +0000 (09:20 +1000)]
drm/nouveau: fix *staging* driver build with switcheroo off.
This driver is in *staging*. Fix the build with the switcheroo off.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 1 Mar 2010 19:23:31 +0000 (14:23 -0500)]
drm/radeon: fix typo in Makefile
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 1 Mar 2010 10:50:01 +0000 (21:50 +1100)]
vga_switcheroo: fix build on platforms with no ACPI
radeon was always including the atpx code unnecessarily, also core
switcheroo was including acpi headers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pauli Nieminen [Mon, 1 Mar 2010 09:37:11 +0000 (11:37 +0200)]
drm/radeon: Fix printf type warning in 64bit system.
Type of iterator was promoted to unsigned long in 64bit systems.
*header is small structure so it is alwas safe to cast return value
of sizeof operator to int.
Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Dave Airlie [Mon, 1 Mar 2010 06:32:15 +0000 (16:32 +1000)]
drm/radeon/kms: bump the KMS version number for square tiling support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 1 Mar 2010 06:22:38 +0000 (16:22 +1000)]
Merge branch 'gpu-switcher' of /ssd/git//linux-2.6 into drm-next-stage
* 'gpu-switcher' of /ssd/git//linux-2.6:
vga_switcheroo: initial implementation (v15)
fb: for framebuffer handover don't exit the loop early.
Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/radeon/Makefile
drivers/gpu/drm/radeon/radeon.h
Dave Airlie [Mon, 1 Feb 2010 05:38:10 +0000 (15:38 +1000)]
vga_switcheroo: initial implementation (v15)
Many new laptops now come with 2 gpus, one to be used for low power
modes and one for gaming/on-ac applications. These GPUs are typically
wired to the laptop panel and VGA ports via a multiplexer unit which
is controlled via ACPI methods.
4 combinations of systems typically exist - with 2 ACPI methods.
Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method
ATI/ATI - some ASUS - use ATPX ACPI Method
Intel/Nvidia - - use _DSM ACPI method
Nvidia/Nvidia - - use _DSM ACPI method.
TODO:
This patch adds support for the ATPX method and initial bits
for the _DSM methods that need to written by someone with
access to the hardware.
Add a proper non-debugfs interface - need to get some proper
testing first.
v2: add power up/down support for both devices
on W500 puts i915/radeon into D3 and cuts power to radeon.
v3: redo probing methods, no DMI list, drm devices call to
register with switcheroo, it tries to find an ATPX method on
any device and once there is two devices + ATPX it inits the
switcher.
v4: ATPX msg handling using buffers - should work on more machines
v5: rearchitect after more mjg59 discussion - move ATPX handling to
radeon driver.
v6: add file headers + initial nouveau bits (to be filled out).
v7: merge delayed switcher code.
v8: avoid suspend/resume of gpu that is off
v9: rearchitect - mjg59 is always right. - move all ATPX code to
radeon, should allow simpler DSM also proper ATRM handling
v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv
v11: fix bug in resuming Intel for 2nd time.
v12: start fixing up nvidia code blindly.
v13: blindly guess at finishing nvidia code
v14: remove radeon audio hacks - fix up intel resume more like upstream
v15: clean up printks + remove unnecessary igd/dis pointers
mount debugfs
/sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected
+ 2 cards.
DIS - immediate change to discrete
IGD - immediate change to IGD
DDIS - delayed change to discrete
DIGD - delayed change to IGD
ON - turn on not in use
OFF - turn off not in use
Tested on W500 (Intel/ATI) and T500 (Intel/ATI)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Rafał Miłecki [Fri, 26 Feb 2010 08:46:32 +0000 (08:46 +0000)]
drm/radeon/kms: do not disable audio engine twice
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Rafał Miłecki [Fri, 26 Feb 2010 08:44:57 +0000 (08:44 +0000)]
Revert "drm/radeon/kms: disable HDMI audio for now on rv710/rv730"
This commit "disabled" audio on RV710 and RV740 only, leaving RV770 and RV730.
The order is: CHIP_RV770 < CHIP_RV730 < CHIP_RV710 < CHIP_RV740.
It is not needed anway, as we do not even try to enable audio on RV770 and
newer. We call initializing function in r600.c only, not in rv770.c.
If there is something causing green tinges, it's HDMI mode setting for encoder
and I will try to debug that.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Rafał Miłecki [Fri, 26 Feb 2010 08:46:33 +0000 (08:46 +0000)]
drm/radeon/kms: do not preset audio stuff and start timer when not using audio
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 1 Mar 2010 06:08:57 +0000 (16:08 +1000)]
Merge branch 'drm-radeon-testing' of /ssd/git/drm-radeon-next into drm-next-stage
* 'drm-radeon-testing' of /ssd/git/drm-radeon-next:
drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond
drm/ttm: fix function prototype to match implementation
drm/radeon: use ALIGN instead of open coding it
drm/radeon/kms: initialize set_surface_reg reg for rs600 asic
Dave Airlie [Wed, 24 Feb 2010 07:17:13 +0000 (17:17 +1000)]
drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond
radeon's have a special ability to passthrough writes in their internal
memory space directly to PCI, this ability means that if some of the internal
surfaces like the depth buffer point at 0x0, any writes to these will
go directly to RAM at 0x0 via PCI busmastering.
Now mesa used to always emit clears after emitting state, since the
radeon mesa driver was refactored a year or more ago, it was found it
could generate a clear request without ever sending any setup state to the
card. So the clear would attempt to clear the depth buffer at 0x0, which
would overwrite main memory at this point. fs corruption ensues.
Also once one app did this correctly, it would never get set back to 0
making this messy to reproduce.
The kernel should block this from happening as mesa runs without privs,
though it does require the user be connected to the current running X session.
This patch implements a check to make sure the depth offset has been set
before a depth clear occurs and if it finds one it prints a warning and
ignores the depth clear request. There is also a mesa fix to avoid sending
the badness going into mesa.
This only affects r100/r200 GPUs in user modesetting mode.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Randy Dunlap [Wed, 24 Feb 2010 22:29:14 +0000 (14:29 -0800)]
drm/ttm: fix function prototype to match implementation
Fix function prototype to match its actual usage and implementation.
drivers/gpu/drm/ttm/ttm_bo_util.c:341:10: error: symbol 'ttm_io_prot' redeclared with different type (originally declared at include/drm/ttm/ttm_bo_driver.h:911) - incompatible argument 1 (different signedness)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matt Turner [Thu, 25 Feb 2010 04:23:31 +0000 (04:23 +0000)]
drm/radeon: use ALIGN instead of open coding it
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Corbin Simpson <MostAwesomeDude@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Fri, 26 Feb 2010 19:14:12 +0000 (19:14 +0000)]
drm/radeon/kms: initialize set_surface_reg reg for rs600 asic
rs600 asic was missing set_surface_reg callback leading to
oops.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 1 Mar 2010 05:41:26 +0000 (15:41 +1000)]
Merge remote branch 'anholt/drm-intel-next' into drm-next-stage
* anholt/drm-intel-next: (103 commits)
drm/i915: Use a dmi quirk to skip a broken SDVO TV output.
drm/i915: enable/disable LVDS port at DPMS time
drm/i915: check for multiple write domains in pin_and_relocate
drm/i915: clean-up i915_gem_flush_gpu_write_domain
drm/i915: reuse i915_gpu_idle helper
drm/i915: ensure lru ordering of fence_list
drm/i915: extract fence stealing code
drm/i915: fixup active list locking in object_unbind
drm/i915: reuse i915_gem_object_put_fence_reg for fence stealing code
drm/i915: Add dependency on the intel agp module
drm/i915: More s/IS_IRONLAKE/HAS_PCH_SPLIT for Sandybridge.
drm/i915: Correct the Sandybridge chipset info structs.
drm/i915: Disable the hangcheck reset on Sandybridge until we add support.
drm/i915: Add a new mobile Sandybridge PCI ID.
agp/intel: Add a new Sandybridge HB/IG PCI ID combo.
drm/i915, agp/intel: Fix stolen memory size on Sandybridge
drm/i915: Correct locking in the modesetting failure path, fixing a BUG_ON.
drm/i915: Disable the surface tile swizzling on Sandybridge.
agp/intel: Use a non-reserved value for the cache field of the PTEs.
drm/i915: Fix sandybridge status page setup.
...
Dave Airlie [Mon, 1 Mar 2010 05:41:15 +0000 (15:41 +1000)]
Merge remote branch 'nouveau/for-airlied' into drm-next-stage
* nouveau/for-airlied: (25 commits)
drm/nouveau: use ALIGN instead of open coding it
drm/nouveau: report unknown connector state if lid closed
drm/nouveau: support version 0x20 displayport tables
drm/nouveau: Fix noaccel/nofbaccel option descriptions.
drm/nv50: Implement ctxprog/state generation.
drm/nouveau: use dcb connector types throughout the driver
drm/nv50: enable hpd on any connector we know the gpio line for
drm/nouveau: use dcb connector table for creating drm connectors
drm/nouveau: construct a connector table for cards that lack a real one
drm/nouveau: check for known dcb connector types
drm/nouveau: parse dcb gpio/connector tables after encoders
drm/nouveau: reorganise bios header, add dcb connector type enums
drm/nouveau: merge nvbios and nouveau_bios_info
drm/nouveau: merge parsed_dcb and bios_parsed_dcb into dcb_table
drm/nouveau: rename parsed_dcb_gpio to dcb_gpio_table
drm/nouveau: allow retrieval of vbios image from debugfs
drm/nouveau: fix missing spin_unlock in failure path
drm/nouveau: fix i2ctable bounds checking
drm/nouveau: fix nouveau_i2c_find bounds checking
drm/nouveau: fix pramdac_table range checking
...
Conflicts:
drivers/gpu/drm/nouveau/nouveau_gem.c
Dave Airlie [Mon, 1 Mar 2010 05:40:12 +0000 (15:40 +1000)]
Merge remote branch 'korg/drm-core-next' into drm-next-stage
* korg/drm-core-next:
drm/ttm: handle OOM in ttm_tt_swapout
drm/radeon/kms/atom: fix shr/shl ops
drm/kms: fix spelling of "CLOCK"
drm/kms: fix fb_changed = true else statement
drivers/gpu/drm/drm_fb_helper.c: don't use private implementation of atoi()
drm: switch all GEM/KMS ioctls to unlocked ioctl status.
Use drm_gem_object_[handle_]unreference_unlocked where possible
drm: introduce drm_gem_object_[handle_]unreference_unlocked
Zhao Yakui [Mon, 8 Feb 2010 13:35:12 +0000 (21:35 +0800)]
drm/i915: Use a dmi quirk to skip a broken SDVO TV output.
This IBM system has a multi-function SDVO card that reports both VGA
and TV, but the system has no TV connector. The TV connector always
reported as connected, which would lead to poor modesetting choices.
https://bugs.freedesktop.org/show_bug.cgi?id=25787
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by: Vance <liangghv@sg.ibm.com>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
Jesse Barnes [Thu, 11 Feb 2010 20:41:05 +0000 (12:41 -0800)]
drm/i915: enable/disable LVDS port at DPMS time
It would be good to disable the LVDS port when we shut down the panel
to save power. We haven't done so until now because we had trouble
getting the right LVDS parameters from the BIOS. I think we're past
that now, so enabling and disabling the port should be safe, though it
would probably be made cleaner with some additional changes to the
display code, where we also bang on the LVDS reg to set the pairing
correctly etc.
Seems to save a bit of power (up to 300mW in my basic wattsup
meter testing).
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Daniel Vetter [Fri, 19 Feb 2010 10:52:02 +0000 (11:52 +0100)]
drm/i915: check for multiple write domains in pin_and_relocate
The assumption that an object has only ever one write domain is deeply
threaded into gem (it's even encoded the the singular of the variable
name). Don't let userspace screw us over.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
Daniel Vetter [Fri, 19 Feb 2010 10:52:01 +0000 (11:52 +0100)]
drm/i915: clean-up i915_gem_flush_gpu_write_domain
Now that we have an exact gpu write domain tracking, we don't need
to move objects to the active list ourself. i915_add_request will
take care of that under all circumstances.
Idea stolen from a patch by Chris Wilson <chris@chris-wilson.co.uk>.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Daniel Vetter [Fri, 19 Feb 2010 10:52:00 +0000 (11:52 +0100)]
drm/i915: reuse i915_gpu_idle helper
We have it, so use it. This required moving the function to avoid
a forward declaration.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
Daniel Vetter [Fri, 19 Feb 2010 10:51:59 +0000 (11:51 +0100)]
drm/i915: ensure lru ordering of fence_list
The fence_list should be lru ordered for otherwise we might try
to steal a fence reg from an active object even though there are
fences from inactive objects available. lru ordering was obeyed
for gpu access everywhere save when moving dirty objects from
flushing_list to active_list.
Fixing this cause the code to indent way to much, so I've extracted
the flushing_list processing logic into its on function.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Daniel Vetter [Fri, 19 Feb 2010 10:51:58 +0000 (11:51 +0100)]
drm/i915: extract fence stealing code
The spaghetti logic in there tripped up my brain's code parser for a
few secs. Prevent this from happening again by extracting the fence
stealing code into a seperate functions. IMHO this slightly clears up
the code flow.
v2: Beautified according to ickle's comments.
v3: ickle forgot to flush his comment queue ... Now there's also a
we-are-paranoid BUG_ON in there.
v4: I've forgotten to switch on my brain when doing v3. Now the BUG_ON
actually checks something useful.
v5: Clean up a stale comment as noted by Eric Anholt.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Daniel Vetter [Fri, 19 Feb 2010 10:51:57 +0000 (11:51 +0100)]
drm/i915: fixup active list locking in object_unbind
All other accesses take this spinlock, so do this here, too.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
Daniel Vetter [Fri, 19 Feb 2010 10:51:56 +0000 (11:51 +0100)]
drm/i915: reuse i915_gem_object_put_fence_reg for fence stealing code
This has a few functional changes against the old code:
* a few more unnecessary loads and stores to the drm_i915_fence_reg
objects. Also an unnecessary store to the hw fence register.
* zaps any userspace mappings before doing other flushes. Only changes
anything when userspace does racy stuff against itself.
* also flush GTT domain. This is a noop, but still try to keep the
bookkeeping correct.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
Zhenyu Wang [Tue, 23 Feb 2010 06:05:24 +0000 (14:05 +0800)]
drm/i915: Add dependency on the intel agp module
See http://bugzilla.kernel.org/show_bug.cgi?id=15021
Make sure that the appropriate AGP module is loaded and probed before
trying to set up the DRM. The DRM already depends on the AGP core,
but in this case we know the specific AGP driver we need too, and can
help users avoid the trap of loading the AGP driver after the DRM
driver.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Fri, 29 Jan 2010 00:45:52 +0000 (16:45 -0800)]
drm/i915: More s/IS_IRONLAKE/HAS_PCH_SPLIT for Sandybridge.
I think this is pretty much correct. Not really tested.
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Fri, 29 Jan 2010 00:13:29 +0000 (16:13 -0800)]
drm/i915: Correct the Sandybridge chipset info structs.
Disables CXSR until it's done, and sets the mobile bit on mobile.
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Fri, 8 Jan 2010 22:25:16 +0000 (14:25 -0800)]
drm/i915: Disable the hangcheck reset on Sandybridge until we add support.
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Thu, 7 Jan 2010 23:08:18 +0000 (15:08 -0800)]
drm/i915: Add a new mobile Sandybridge PCI ID.
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Fri, 8 Jan 2010 00:21:46 +0000 (16:21 -0800)]
agp/intel: Add a new Sandybridge HB/IG PCI ID combo.
Signed-off-by: Eric Anholt <eric@anholt.net>
Zhenyu Wang [Tue, 10 Nov 2009 17:25:25 +0000 (01:25 +0800)]
drm/i915, agp/intel: Fix stolen memory size on Sandybridge
New memory control config reg at 0x50 should be used for stolen
memory size detection on Sandybridge.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Mon, 9 Nov 2009 22:57:34 +0000 (14:57 -0800)]
drm/i915: Correct locking in the modesetting failure path, fixing a BUG_ON.
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Thu, 5 Nov 2009 23:30:35 +0000 (15:30 -0800)]
drm/i915: Disable the surface tile swizzling on Sandybridge.
I can't explain this, except that it makes my display correct.
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Mon, 2 Nov 2009 23:33:05 +0000 (15:33 -0800)]
agp/intel: Use a non-reserved value for the cache field of the PTEs.
I don't know if this is what we'll want to be using long term, we'll see.
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Mon, 2 Nov 2009 20:08:22 +0000 (12:08 -0800)]
drm/i915: Fix sandybridge status page setup.
The register's moved to the same location as the one for the BCS, it seems.
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Mon, 26 Oct 2009 23:44:17 +0000 (16:44 -0700)]
drm/i915: Set up fence registers on sandybridge.
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Thu, 22 Oct 2009 23:11:14 +0000 (16:11 -0700)]
drm/i915: Add initial bits for VGA modesetting bringup on Sandybridge.
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Thu, 22 Oct 2009 23:10:52 +0000 (16:10 -0700)]
agp/intel: Add support for Sandybridge.
Signed-off-by: Eric Anholt <eric@anholt.net>
Dave Airlie [Thu, 25 Feb 2010 03:44:04 +0000 (13:44 +1000)]
Merge remote branch 'korg/drm-radeon-testing' into drm-next-stage
* korg/drm-radeon-testing: (62 commits)
drm/radeon/kms: update new pll algo
drm/radeon/kms: add support for square microtiles on r3xx-r5xx
drm/radeon/kms: force pinning buffer into visible VRAM
drm/radeon/kms/evergreen: fix typo in cursor code
drm/radeon/kms: implement reading active PCIE lanes on R600+
drm/radeon/kms: for downclocking non-mobility check PERFORMANCE state
drm/radeon/kms: simplify storing current and requested PM mode
drm/radeon: fixes for r6xx/r7xx gfx init
drm/radeon/rv740: fix backend setup
drm/radeon/kms: fix R3XX/R4XX memory controller initialization
[rfc] drm/radeon/kms: pm debugging check for vbl.
drm/radeon: Fix memory allocation failures in the preKMS command stream checking.
drm: Add generic multipart buffer.
drm/radeon/kms: simplify memory controller setup V2
drm/radeon: Add asic hook for dma copy to r200 cards.
drm/radeon/kms: Create asic structure for r300 pcie cards.
drm/radeon/kms: remove unused r600_gart_clear_page
drm/radeon/kms: remove HDP flushes from fence emit (v2)
drm/radeon/kms: add LVDS pll quirk for Dell Studio 15
drm/radeon/kms: simplify picking power state
...
Conflicts:
drivers/gpu/drm/radeon/atom.c
drivers/gpu/drm/radeon/atombios.h
drivers/gpu/drm/radeon/atombios_dp.c
drivers/gpu/drm/radeon/r600.c
drivers/gpu/drm/radeon/r600_audio.c
drivers/gpu/drm/radeon/r600_cp.c
drivers/gpu/drm/radeon/radeon.h
drivers/gpu/drm/radeon/radeon_connectors.c
drivers/gpu/drm/radeon/radeon_ring.c
drivers/gpu/drm/radeon/rv770.c
Matt Turner [Thu, 25 Feb 2010 04:27:10 +0000 (23:27 -0500)]
drm/nouveau: use ALIGN instead of open coding it
CC: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 25 Feb 2010 02:12:09 +0000 (12:12 +1000)]
drm/nouveau: report unknown connector state if lid closed
This is in preference to disconnected. If there's no other outputs
connected this will cause LVDS to be programmed even with the lid
closed rather than having X fail to start because of no available
outputs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 25 Feb 2010 01:53:00 +0000 (11:53 +1000)]
drm/nouveau: support version 0x20 displayport tables
Not entirely identical to 0x21, the per-encoder table header lacks the
third init table pointer. However, our current parsing of the table
should work just fine.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Kościelnicki [Thu, 25 Feb 2010 00:54:04 +0000 (00:54 +0000)]
drm/nouveau: Fix noaccel/nofbaccel option descriptions.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Kościelnicki [Thu, 25 Feb 2010 00:54:02 +0000 (00:54 +0000)]
drm/nv50: Implement ctxprog/state generation.
This removes dependence on external firmware for NV50 generation cards.
If the generated ctxprogs don't work for you for some reason, please
report it.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Feb 2010 04:01:40 +0000 (14:01 +1000)]
drm/nouveau: use dcb connector types throughout the driver
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Feb 2010 03:45:57 +0000 (13:45 +1000)]
drm/nv50: enable hpd on any connector we know the gpio line for
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Feb 2010 02:07:31 +0000 (12:07 +1000)]
drm/nouveau: use dcb connector table for creating drm connectors
This makes this code common to both the nv04 and nv50 paths.
For the moment, we keep the previous behaviour with HDMI/eDP connectors
and report them as DVI-D/DP instead. This will be fixed once the rest
of the code has been fixed to deal with those types.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Feb 2010 01:53:59 +0000 (11:53 +1000)]
drm/nouveau: construct a connector table for cards that lack a real one
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Feb 2010 01:09:20 +0000 (11:09 +1000)]
drm/nouveau: check for known dcb connector types
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Feb 2010 00:48:16 +0000 (10:48 +1000)]
drm/nouveau: parse dcb gpio/connector tables after encoders
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Feb 2010 00:31:39 +0000 (10:31 +1000)]
drm/nouveau: reorganise bios header, add dcb connector type enums
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Feb 2010 00:03:05 +0000 (10:03 +1000)]
drm/nouveau: merge nvbios and nouveau_bios_info
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 23 Feb 2010 23:56:18 +0000 (09:56 +1000)]
drm/nouveau: merge parsed_dcb and bios_parsed_dcb into dcb_table
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 23 Feb 2010 23:46:27 +0000 (09:46 +1000)]
drm/nouveau: rename parsed_dcb_gpio to dcb_gpio_table
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 23 Feb 2010 01:39:02 +0000 (11:39 +1000)]
drm/nouveau: allow retrieval of vbios image from debugfs
It's very useful to be able to access this without additional tools for
debugging purposes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Luca Barbieri [Sat, 20 Feb 2010 10:08:56 +0000 (11:08 +0100)]
drm/nouveau: fix missing spin_unlock in failure path
Found by sparse.
Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Mon, 15 Feb 2010 22:24:49 +0000 (23:24 +0100)]
drm/nouveau: fix i2ctable bounds checking
i2c_entries seems to be the number of i2c entries,
so with index equal to this number, we could read
invalid data from i2ctable. Fix it.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Wed, 17 Feb 2010 18:04:01 +0000 (19:04 +0100)]
drm/nouveau: fix nouveau_i2c_find bounds checking
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Wed, 17 Feb 2010 18:04:00 +0000 (19:04 +0100)]
drm/nouveau: fix pramdac_table range checking
get_tmds_index_reg reads some value from stack when mlv happens
to be equal to size of pramdac_table array. Fix it.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 12 Feb 2010 00:27:35 +0000 (10:27 +1000)]
drm/nouveau: new gem pushbuf interface, bump to 0.0.16
This commit breaks the userspace interface, and requires a new libdrm for
nouveau to operate again.
The multiple GEM_PUSHBUF ioctls that were present in 0.0.15 for
compatibility purposes are now gone, and replaced with the new ioctl which
allows for multiple push buffers to be submitted (necessary for hw index
buffers in the nv50 3d driver) and relocations to be applied on any buffer.
A number of other ioctls (CARD_INIT, GEM_PIN, GEM_UNPIN) that were needed
for userspace modesetting have also been removed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Ben Skeggs [Fri, 12 Feb 2010 01:11:54 +0000 (11:11 +1000)]
drm/nv50: make pushbuf dma object cover entire vm
This allows us to submit push buffers from any memtype to the hardware.
We'll need this ability for VRAM index buffers at some point.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 11 Feb 2010 23:05:42 +0000 (09:05 +1000)]
drm/nouveau: remove PUSHBUF_CAL macro
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 11 Feb 2010 06:37:26 +0000 (16:37 +1000)]
drm/nv50: switch to indirect push buffer controls
PFIFO on G80 and up has a new mode where the main ring buffer is simply a
ring of pointers to indirect buffers containing the actual command/data
packets. In order to be able to implement index buffers in the 3D driver
we need to be able to submit data-only push buffers right after the cmd
packet header, which is only possible using the new command submission
method.
This commit doesn't make it possible to implement index buffers yet, some
userspace interface changes will be required, but it does allow for
testing/debugging of the hardware-side support in the meantime.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Maarten Maathuis [Mon, 1 Feb 2010 19:58:27 +0000 (20:58 +0100)]
drm/nouveau: protect channel create/destroy and irq handler with a spinlock
The nv50 pgraph handler (for example) could reenable pgraph fifo access
and that would be bad when pgraph context is being unloaded (we need the
guarantee a ctxprog isn't running).
Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Thu, 25 Feb 2010 04:05:09 +0000 (14:05 +1000)]
fb: for framebuffer handover don't exit the loop early.
An offb machine has been seen in the fields which adds two
offb nodes, so continue scanning the list after removing one.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 25 Feb 2010 03:39:36 +0000 (13:39 +1000)]
Merge remote branch 'anholt/drm-intel-next' into drm-next-stage
* anholt/drm-intel-next:
drm/i915: Record batch buffer following GPU error
drm/i915: give up on 8xx lid status
drm/i915: reduce some of the duplication of tiling checking
drm/i915: blow away userspace mappings before fence change
drm/i915: move a gtt flush to the correct place
agp/intel: official names for Pineview and Ironlake
drm/i915: overlay: drop superflous gpu flushes
drm/i915: overlay: nuke readback to flush wc caches
drm/i915: provide self-refresh status in debugfs
drm/i915: provide FBC status in debugfs
drm/i915: fix drps disable so unload & re-load works
drm/i915: Fix OGLC performance regression on 945
drm/i915: Deobfuscate the render p-state obfuscation
drm/i915: add dynamic performance control support for Ironlake
drm/i915: enable memory self refresh on 9xx
drm/i915: Don't reserve compatibility fence regs in KMS mode.
drm/i915: Keep MCHBAR always enabled
drm/i915: Replace open-coded eviction in i915_gem_idle()
Dave Airlie [Thu, 25 Feb 2010 03:39:29 +0000 (13:39 +1000)]
Merge remote branch 'korg/drm-core-next' into drm-next-stage
* korg/drm-core-next:
drm/ttm: handle OOM in ttm_tt_swapout
drm/radeon/kms/atom: fix shr/shl ops
drm/kms: fix spelling of "CLOCK"
drm/kms: fix fb_changed = true else statement
drivers/gpu/drm/drm_fb_helper.c: don't use private implementation of atoi()
drm: switch all GEM/KMS ioctls to unlocked ioctl status.
Use drm_gem_object_[handle_]unreference_unlocked where possible
drm: introduce drm_gem_object_[handle_]unreference_unlocked
Maarten Maathuis [Sat, 20 Feb 2010 02:22:21 +0000 (03:22 +0100)]
drm/ttm: handle OOM in ttm_tt_swapout
- Without this change I get a general protection fault.
- Also use PTR_ERR where applicable.
Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 24 Feb 2010 02:56:12 +0000 (21:56 -0500)]
drm/radeon/kms/atom: fix shr/shl ops
The whole attribute table is valid for
shr/shl ops.
Fixes fdo bug 26668
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 23 Feb 2010 08:24:38 +0000 (03:24 -0500)]
drm/radeon/kms: update new pll algo
- add support for pre-avivo chips
- add support for fixed post/ref dividers
- add support for non-fractional fb dividers
By default avivo chips use the new algo and
pre-avivo chips use the old algo. Use the "new_pll"
module option to toggle between them.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Marek Olšák [Sun, 14 Feb 2010 06:10:10 +0000 (07:10 +0100)]
drm/radeon/kms: add support for square microtiles on r3xx-r5xx
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Fri, 19 Feb 2010 14:33:54 +0000 (14:33 +0000)]
drm/radeon/kms: force pinning buffer into visible VRAM
This patch properly set visible VRAM and enforce any pinned buffer
to be into visible VRAM. We might later add a flag to release this
constraint for some newer hw more clever than previous.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 23 Feb 2010 18:12:43 +0000 (13:12 -0500)]
drm/radeon/kms/evergreen: fix typo in cursor code
cursor x/y are surface relative.
fixes fdo bug 26551
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Wed, 24 Feb 2010 18:52:17 +0000 (10:52 -0800)]
Linux 2.6.33
Linus Torvalds [Wed, 24 Feb 2010 18:51:21 +0000 (10:51 -0800)]
Merge branch 'urgent' of git://git./linux/kernel/git/kyle/parisc-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
parisc: Set PCI CLS early in boot.
Linus Torvalds [Wed, 24 Feb 2010 18:51:04 +0000 (10:51 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Fix broken sn2 build
Carlos O'Donell [Mon, 22 Feb 2010 23:25:59 +0000 (23:25 +0000)]
parisc: Set PCI CLS early in boot.
Set the PCI CLS early in the boot process to prevent
device failures. In pcibios_set_master use the new
pci_cache_line_size instead of a hard-coded value.
Signed-off-by: Carlos O'Donell <carlos@codesourcery.com>
Reviewed-by: Grant Grundler <grundler@google.com>
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Linus Torvalds [Wed, 24 Feb 2010 15:43:02 +0000 (07:43 -0800)]
Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix out_le32() macro
microblaze: Fix cache loop function for cache range
Linus Torvalds [Wed, 24 Feb 2010 15:42:42 +0000 (07:42 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
Revert "block: improve queue_should_plug() by looking at IO depths"
Steven J. Magnani [Mon, 22 Feb 2010 15:25:42 +0000 (09:25 -0600)]
microblaze: Fix out_le32() macro
Trailing semicolon causes compilation involving out_le32() to fail.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 15 Feb 2010 09:50:42 +0000 (10:50 +0100)]
microblaze: Fix cache loop function for cache range
I create wrong asm code but none test shows that this part of code is wrong.
I am not convinces that were good idea to create asm optimized macros
for caches. The reason is that there is not optimization with previous code
that's why make sense to add old code and do some benchmarking which
functions are faster.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Linus Torvalds [Wed, 24 Feb 2010 03:44:07 +0000 (19:44 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
net: bug fix for vlan + gro issue
tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON
cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit)
IPv6: better document max_addresses parameter
MAINTAINERS: update mv643xx_eth maintenance status
e1000: Fix DMA mapping error handling on RX
iwlwifi: sanity check before counting number of tfds can be free
iwlwifi: error checking for number of tfds in queue
iwlwifi: set HT flags after channel in rxon
Ajit Khaparde [Tue, 16 Feb 2010 20:25:43 +0000 (20:25 +0000)]
net: bug fix for vlan + gro issue
Traffic (tcp) doesnot start on a vlan interface when gro is enabled.
Even the tcp handshake was not taking place.
This is because, the eth_type_trans call before the netif_receive_skb
in napi_gro_finish() resets the skb->dev to napi->dev from the previously
set vlan netdev interface. This causes the ip_route_input to drop the
incoming packet considering it as a packet coming from a martian source.
I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7.
With this fix, the traffic starts and the test runs fine on both vlan
and non-vlan interfaces.
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 24 Feb 2010 02:15:05 +0000 (18:15 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI: Be in TS_POLLING state during mwait based C-state entry
ACPI: Fix regression where _PPC is not read at boot even when ignore_ppc=0
acer-wmi: Respect current backlight level when loading
Linus Torvalds [Wed, 24 Feb 2010 02:13:34 +0000 (18:13 -0800)]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/vmwgfx: Fix queries if no dma buffer thrashing is occuring.
drm/nv50: fix vram ptes on IGPs to point at stolen system memory
drm/nv50: fix instmem binding on IGPs to point at stolen system memory
drm/nv50: improve vram page table construction
drm/nv50: more efficient clearing of gpu page table entries
drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vram
drm/nouveau: Fix up pre-nv17 analog load detection.
Hedi Berriche [Tue, 23 Feb 2010 23:58:49 +0000 (23:58 +0000)]
[IA64] Fix broken sn2 build
Revert the change made to arch/ia64/sn/kernel/setup.c by commit
204fba4aa303ea4a7bb726a539bf4a5b9e3203d0 as it breaks the build.
Fixing the build the
b94b08081fcecf83fa690d6c5664f6316fe72208 way
breaks xpc because genksyms then fails to generate an CRC for
per_cpu____sn_cnodeid_to_nasid because of limitations in the
generic genksyms code.
Signed-off-by: Hedi Berriche <hedi@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
David S. Miller [Tue, 23 Feb 2010 09:27:05 +0000 (01:27 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
Atsushi Nemoto [Fri, 19 Feb 2010 05:13:58 +0000 (05:13 +0000)]
tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON
The netif_wake_queue() is called correctly (i.e. only on !txfull
condition) from txdone routine. So Unconditional call to the
netif_wake_queue() here is wrong. This might cause calling of
start_xmit routine on txfull state and trigger BUG_ON.
This bug does not happen when NAPI disabled. After txdone there
must be at least one free tx slot. But with NAPI, this is not
true anymore and the BUG_ON can hits on heavy load.
In this driver NAPI was enabled on 2.6.33-rc1 so this is
regression from 2.6.32 kernel.
Reported-by: Ralf Roesch <ralf.roesch@rw-gmbh.de>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Torgny Johansson [Fri, 19 Feb 2010 01:59:15 +0000 (01:59 +0000)]
cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit)
This patch adds a new vid/pid to the cdc_ether whitelist.
Device added:
- Ericsson Mobile Broadband variant C3607w
Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signed-off-by: David S. Miller <davem@davemloft.net>
Brian Haley [Mon, 22 Feb 2010 12:27:21 +0000 (12:27 +0000)]
IPv6: better document max_addresses parameter
Andrew Morton wrote:
>> >From ip-sysctl.txt file in kernel documentation I can see following description
>> for max_addresses:
>> max_addresses - INTEGER
>> Number of maximum addresses per interface. 0 disables limitation.
>> It is recommended not set too large value (or 0) because it would
>> be too easy way to crash kernel to allow to create too much of
>> autoconfigured addresses.
^^^^^^^^^^^^^^
>> If this parameter applies only for auto-configured IP addressed, please state
>> it more clearly in docs or rename the parameter to show that it refers to
>> auto-configuration.
It did mention autoconfigured in the text, but the below makes it more obvious.
More clearly document IPv6 max_addresses parameter.
Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lennert Buytenhek [Mon, 22 Feb 2010 22:34:54 +0000 (22:34 +0000)]
MAINTAINERS: update mv643xx_eth maintenance status
I am no longer with Marvell.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anton Blanchard [Fri, 19 Feb 2010 17:54:53 +0000 (17:54 +0000)]
e1000: Fix DMA mapping error handling on RX
Check for error return from pci_map_single/pci_map_page and clean up.
With this and the previous patch the driver was able to handle a significant
percentage of errors (I set the fault injection rate to 10% and could still
download large files at a reasonable speed).
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jens Axboe [Tue, 23 Feb 2010 07:40:43 +0000 (08:40 +0100)]
Revert "block: improve queue_should_plug() by looking at IO depths"
This reverts commit
fb1e75389bd06fd5987e9cda1b4e0305c782f854.
"Benjamin S." <sbenni@gmx.de> reports that the patch in question
causes a big drop in sequential throughput for him, dropping from
200MB/sec down to only 70MB/sec.
Needs to be investigated more fully, for now lets just revert the
offending commit.
Conflicts:
include/linux/blkdev.h
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Thomas Hellstrom [Sun, 21 Feb 2010 14:54:55 +0000 (14:54 +0000)]
drm/vmwgfx: Fix queries if no dma buffer thrashing is occuring.
Intercept query commands and apply relocations to their guest pointers.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 23 Feb 2010 05:42:18 +0000 (15:42 +1000)]
Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linus
* 'nouveau/for-airlied' of ../drm-nouveau-next:
drm/nv50: fix vram ptes on IGPs to point at stolen system memory
drm/nv50: fix instmem binding on IGPs to point at stolen system memory
drm/nv50: improve vram page table construction
drm/nv50: more efficient clearing of gpu page table entries
drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vram
drm/nouveau: Fix up pre-nv17 analog load detection.