OSDN Git Service
Martin Storsjö [Mon, 9 Jan 2012 16:27:33 +0000 (18:27 +0200)]
Add a tool for creating smooth streaming manifests
It can also optionally split the file into individual fragments,
which allows it to be served from any web server without any
server side support.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 13 Jan 2012 12:40:24 +0000 (14:40 +0200)]
movdec: Calculate an average bit rate for fragmented streams, too
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 9 Jan 2012 09:05:33 +0000 (11:05 +0200)]
movenc: Write the sample rate instead of time scale in the stsd atom
For ismv/isma, the time scale might not be the same as the sample
rate.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 9 Jan 2012 15:58:26 +0000 (17:58 +0200)]
movenc: Add a separate ismv/isma (smooth streaming) muxer
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 20 Jan 2012 17:29:33 +0000 (19:29 +0200)]
movenc: Allow the caller to decide on fragmentation
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 20 Jan 2012 17:27:33 +0000 (19:27 +0200)]
libavformat: Add a flag for muxers that support write_packet(NULL) for flushing
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 5 Jan 2012 11:57:05 +0000 (13:57 +0200)]
movenc: Add support for writing fragmented mov files
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 6 Jan 2012 23:32:53 +0000 (01:32 +0200)]
movenc: Add a separate start_pts
This fixes calculation of trackDuration if the MOVIentry array
is cleared. This is required by the fragmentation support in the
next patch.
Signed-off-by: Martin Storsjö <martin@martin.st>
Ronald S. Bultje [Wed, 25 Jan 2012 09:17:52 +0000 (17:17 +0800)]
dsputil: use vertical component for drawing bottom edge.
Current code only writes 8 pixels of vertical edge for YUV422, which
causes MC artifacts when subsequent frames use data from that edge.
Alex Converse [Mon, 23 Jan 2012 21:08:32 +0000 (13:08 -0800)]
aacenc: Fix identification padding when the bitstream is already aligned.
Michael Niedermayer [Mon, 23 Jan 2012 21:05:03 +0000 (13:05 -0800)]
aacenc: Write correct length for long identification strings.
When the length is the escape value (15), the new length is calculated by
15 + get_bits(8) - 1.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Justin Ruggles [Tue, 24 Jan 2012 16:46:58 +0000 (11:46 -0500)]
aud: remove unneeded field, audio_stream_index from context
There is only one stream, so it will always be index 0.
This also allows for removal of the private context.
Justin Ruggles [Tue, 24 Jan 2012 16:43:54 +0000 (11:43 -0500)]
aud: fix time stamp calculation for ADPCM IMA WS
also allows for removing some unused context fields
Justin Ruggles [Tue, 24 Jan 2012 16:40:23 +0000 (11:40 -0500)]
aud: simplify header parsing
also allows for removing some unused context fields
Justin Ruggles [Tue, 24 Jan 2012 16:28:02 +0000 (11:28 -0500)]
aud: set pts_wrap_bits to 64.
Time stamps are not read from the bitstream, so no wrapping is needed.
Justin Ruggles [Tue, 24 Jan 2012 16:41:37 +0000 (11:41 -0500)]
cosmetics: indentation
Justin Ruggles [Tue, 24 Jan 2012 16:09:05 +0000 (11:09 -0500)]
aud: support Westwood SND1 audio in AUD files.
Fixes decoding of the handful of "death scream" samples from
"Command and Conquer" that use SND1. e.g.
http://samples.libav.org/game-formats/westwood-aud/nuyell1.aud
http://samples.libav.org/game-formats/westwood-aud/nuyell7.aud
Justin Ruggles [Mon, 23 Jan 2012 17:23:27 +0000 (12:23 -0500)]
adpcm_ima_ws: fix stereo decoding
Stereo ADPCM IMA WS is planar for VQA version 3 and 2-sample interleaved for
VQA version 2.
Justin Ruggles [Mon, 23 Jan 2012 19:57:32 +0000 (14:57 -0500)]
avcodec: add a new codec_id for CRYO APC IMA ADPCM.
The stereo layout and extradata is significantly different from that in
Westwood IMA ADPCM, so a separate codec_id is warranted.
Justin Ruggles [Mon, 23 Jan 2012 18:43:54 +0000 (13:43 -0500)]
vqa: remove unused context fields, audio_samplerate and audio_bits
Justin Ruggles [Mon, 23 Jan 2012 18:28:20 +0000 (13:28 -0500)]
vqa: clean up audio header parsing
Fix setting of bit_rate and bits_per_coded_sample.
Ask for sample for unsupported VQA versions.
Justin Ruggles [Mon, 23 Jan 2012 16:38:00 +0000 (11:38 -0500)]
vqa: set time base to frame rate as coded in the header.
According to Multimedia Wiki documentation, the frame rate is not always 15,
and the actual value can be found in the header.
Justin Ruggles [Mon, 23 Jan 2012 16:06:35 +0000 (11:06 -0500)]
vqa: set packet duration.
Also remove unused context field, audio_frame_counter.
Justin Ruggles [Mon, 23 Jan 2012 15:55:28 +0000 (10:55 -0500)]
vqa: use 1/sample_rate as the audio stream time base
Justin Ruggles [Mon, 23 Jan 2012 15:52:49 +0000 (10:52 -0500)]
vqa: set stream start_time to 0.
The format has no coded timestamps and must use packet durations to generate
them.
Anton Khirnov [Thu, 12 Jan 2012 10:16:38 +0000 (11:16 +0100)]
lavc: postpone the removal of AVCodecContext.request_channels.
Although it has been deprecated for a long time, its intended
replacement (request_channel_layout) is not actually used anywhere, so
request_channels is currently the only way to access that functionality.
Anton Khirnov [Sun, 22 Jan 2012 09:43:40 +0000 (10:43 +0100)]
lavf: postpone removing av_close_input_file().
It has been deprecated only recently.
Anton Khirnov [Sun, 22 Jan 2012 09:43:40 +0000 (10:43 +0100)]
lavc: postpone removing old audio encoding and decoding API
It has been deprecated only recently.
Anton Khirnov [Sun, 22 Jan 2012 09:51:26 +0000 (10:51 +0100)]
avplay: remove the -er option.
Error recognition flags can and should be set directly with AVOptions.
Anton Khirnov [Thu, 12 Jan 2012 10:22:59 +0000 (11:22 +0100)]
lavd: remove deprecated v4l grab device.
Paul B Mahol [Mon, 23 Jan 2012 23:28:50 +0000 (23:28 +0000)]
Changelog: restore version <next> header
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Janne Grunau [Mon, 23 Jan 2012 19:57:04 +0000 (20:57 +0100)]
rv10: verify slice offsets against buffer size
Found by John Villamil <johnv@matasano.com> in fuzzed rv20 in mkv files.
Anton Khirnov [Thu, 12 Jan 2012 10:12:15 +0000 (11:12 +0100)]
Remove ffmpeg.
Nathan Caldwell [Sat, 24 Dec 2011 00:36:15 +0000 (17:36 -0700)]
aacenc: Simplify windowing
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Nathan Caldwell [Sat, 24 Dec 2011 22:24:16 +0000 (15:24 -0700)]
aacenc: Move saved overlap samples to the beginning of the same buffer as incoming samples.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Nathan Caldwell [Thu, 15 Dec 2011 02:43:56 +0000 (19:43 -0700)]
aacenc: Deinterleave input samples before processing.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Nathan Caldwell [Wed, 7 Dec 2011 22:20:10 +0000 (15:20 -0700)]
aacenc: Store channel count in AACEncContext.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Nathan Caldwell [Fri, 6 Jan 2012 21:24:37 +0000 (14:24 -0700)]
aacenc: Move Q^3/4 calculation to it's own table
This should be moved to tablegen at some point.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Nathan Caldwell [Sun, 18 Dec 2011 01:45:55 +0000 (18:45 -0700)]
aacenc: Request normalized float samples instead of converting s16 samples to float.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Nathan Caldwell [Sat, 7 Jan 2012 21:21:35 +0000 (14:21 -0700)]
aacpsy: Replace an if with FFMAX in LAME windowing.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Nathan Caldwell [Mon, 9 Jan 2012 01:38:39 +0000 (18:38 -0700)]
aacenc: cosmetics, replace 'rd' with 'bits' in codebook_trellis_rate to make it more clear what is being calculated.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Nathan Caldwell [Sat, 7 Jan 2012 21:16:10 +0000 (14:16 -0700)]
aacpsy: cosmetics, change a FIXME to a NOTE about subshort comparisons
Also fix a typo.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Nathan Caldwell [Thu, 15 Dec 2011 02:50:23 +0000 (19:50 -0700)]
aacenc: cosmetics: move init() and end() to the bottom of the file.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Nathan Caldwell [Fri, 2 Dec 2011 22:08:55 +0000 (15:08 -0700)]
aacenc: aac_encode_init() cleanup
Macroify sanity checks and check return values of allocs and other functions.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
Paul B Mahol [Sat, 21 Jan 2012 17:45:52 +0000 (17:45 +0000)]
XWD encoder and decoder
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Hendrik Leppkes [Fri, 13 Jan 2012 17:41:21 +0000 (18:41 +0100)]
vc1: don't read the interpfrm and bfraction elements for interlaced frames
This matches the spec as well as the reference decoder, and fixes a bug
with interlaced frame decoding.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Janne Grunau [Sun, 22 Jan 2012 18:57:13 +0000 (19:57 +0100)]
mxfdec: fix memleak on mxf_read_close()
Justin Ruggles [Fri, 20 Jan 2012 18:56:51 +0000 (13:56 -0500)]
westwood: split the AUD and VQA demuxers into separate files.
They have no code in common.
Janne Grunau [Thu, 5 Jan 2012 19:15:53 +0000 (20:15 +0100)]
riff: fix invalid av_freep() calls on EOF in ff_read_riff_info
Carl Eugen Hoyos [Wed, 28 Dec 2011 04:54:59 +0000 (05:54 +0100)]
pam: Fix a typo that broke writing and reading PAM files.
Reported and reviewed by Derek Buitenhuis.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Janne Grunau [Wed, 21 Dec 2011 19:12:24 +0000 (20:12 +0100)]
mxfdec: fix memleak on av_realloc failures
Tomas Härdin [Fri, 16 Dec 2011 10:02:04 +0000 (11:02 +0100)]
mxfdec: Do not parse slices or DeltaEntryArrays.
The most recent demuxing/seeking code does not need them.
Janne Grunau [Thu, 8 Dec 2011 19:28:49 +0000 (20:28 +0100)]
mxfdec: hybrid demuxing/seeking solution
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we
do not use delta entries or slices, only StreamOffsets. OPAtom seeking
basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
Based on several patches by Tomas Härdin <tomas.hardin@codemill.se> and
Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
Changed av_calloc to av_mallocz, added overflow checks.
Tomas Härdin [Sat, 10 Dec 2011 11:11:11 +0000 (12:11 +0100)]
mxfdec: Add Avid's essence element key.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Carl Eugen Hoyos [Sat, 10 Dec 2011 13:58:57 +0000 (14:58 +0100)]
mfxdec: Separate mxf_essence_container_uls for audio and video.
It is a really bad idea to assign a video codec id
when we have set codec_type to audio and vice versa.
Prevents detection of mp2 in mxf as mpeg2video.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Tomas Härdin [Thu, 8 Dec 2011 11:23:36 +0000 (12:23 +0100)]
mxfdec: Compute packet offsets properly.
This replaces the old essence_offset code.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Tomas Härdin [Thu, 8 Dec 2011 10:53:57 +0000 (11:53 +0100)]
mxfdec: Use MaterialPackage - Track - TrackID instead of the system_item hack.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Tomas Härdin [Thu, 8 Dec 2011 10:21:58 +0000 (11:21 +0100)]
mxfdec: use av_dlog() for 'no corresponding source package found'
This is not an error and expected behavior for OPAtom files.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Tomas Härdin [Thu, 8 Dec 2011 10:06:23 +0000 (11:06 +0100)]
mxfdec: Make mxf->partitions sorted by offset.
This also zeroes new entries for good measure (used by future patches).
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Tomas Härdin [Wed, 7 Dec 2011 16:43:36 +0000 (17:43 +0100)]
mxfdec: parse ThisPartition
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Tomas Härdin [Mon, 14 Mar 2011 16:00:21 +0000 (17:00 +0100)]
mxfdec: Speed up metadata and index parsing.
Specifically, this means parsing as before until we run into essence.
At that point we seek to the footer and parse until EOF. After that we start
seeking backward to the previous partition and parse that until we run into
essence or the next partition. This procedure is repeated until we encounter
the last partition we parsed in the forward direction.
The end result of all this is that large essence containers are not needlessly
parsed. This speeds up parsing large files a lot.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Tomas Härdin [Mon, 28 Nov 2011 09:51:00 +0000 (10:51 +0100)]
mxfdec: Make sure DataDefinition is consistent between material track and source track.
This fixes 0001GL.MXF.V1.mxf_opatom.mxf and 0001GL00.MXF.A1.mxf_opatom.mxf
getting two streams each due to both using the same SourcePackageID.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Tomas Härdin [Mon, 28 Nov 2011 08:53:10 +0000 (09:53 +0100)]
mxfdec: add EssenceContainer UL found in 0001GL00.MXF.A1.mxf_opatom.mxf
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Tomas Härdin [Fri, 11 Nov 2011 14:01:34 +0000 (15:01 +0100)]
mxfdec: Add hack that adjusts the n_delta calculation when system items are present.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Janne Grunau [Wed, 9 Nov 2011 10:47:57 +0000 (11:47 +0100)]
mxfdec: Parse IndexTableSegments and convert them into AVIndexEntry arrays.
Based on patch from Tomas Härdin <tomas.hardin@codemill.se>
and work by Georg Lippitsch <georg.lippitsch@gmx.at>
Changed av_calloc to av_mallocz and added overflow checks.
Tomas Härdin [Fri, 7 Oct 2011 13:48:00 +0000 (15:48 +0200)]
mxfdec: Move FooterPartition to MXFContext and make sure it is never zero.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Joakim Plate [Wed, 14 Sep 2011 17:26:48 +0000 (19:26 +0200)]
mxfdec: check return value of avio_seek
Avoid modifying state if avio_seek fails.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Philip de Nier [Mon, 12 Sep 2011 10:13:44 +0000 (11:13 +0100)]
mxfdec: skip to end of structural sets
This fixes reading of partition packs. The code stops reading after the
operational pattern and should skip the array of essence container
labels that follow.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Tomas Härdin [Mon, 7 Feb 2011 15:07:41 +0000 (16:07 +0100)]
mxfdec: parse MXF partitions
Anton Khirnov [Thu, 12 Jan 2012 08:51:23 +0000 (09:51 +0100)]
avserver: fix build after the next bump.
Now that 0.8 is out we can reapply this commit. It breaks shared
avserver builds due to avserver using internal libavformat symbols,
which are now hidden, so this commit also disables avserver with
--enable-shared.
Dmitry Volyntsev [Wed, 18 Jan 2012 09:46:37 +0000 (13:46 +0400)]
rtsp: Use a random offset for trying to open UDP ports for RTP
This avoids (for all practical cases) the issue of reusing
the same UDP port as for an earlier connection. If the remote
doesn't know the previous session was closed, he might keep
on sending packets to that port. If we always start off trying
to open the same UDP port, we might get those packets intermixed
with the new ones.
This is occasionally an issue when testing RTSP stuff with
DSS, perhaps also with other servers.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sat, 21 Jan 2012 21:28:11 +0000 (23:28 +0200)]
rtsp: Allow specifying the UDP port range via AVOptions
Signed-off-by: Martin Storsjö <martin@martin.st>
Dmitry Volyntsev [Wed, 18 Jan 2012 09:54:16 +0000 (13:54 +0400)]
rtsp: Remove a leftover, currently pointless check
This check isn't relevant in the way the code currently works.
Also change a case of if (x == 0) into if (!x).
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sat, 21 Jan 2012 15:20:45 +0000 (17:20 +0200)]
rtpdec: Use our own SSRC in the SDES field when sending RRs
The s->ssrc field is the sender's SSRC, we use ssrc + 1 to get
a collision free "unique" SSRC for ourselves in the RR part.
The SDES block in the RTCP packet should describe ourselves,
not the sender.
This was fixed for the RR part in
952139a3226b, but wasn't
fixed for the SDES part until now.
This could cause some Axis cameras to send RTCP BYE packets
to us due to the SSRC collision.
Signed-off-by: Martin Storsjö <martin@martin.st>
Reinhard Tartler [Sat, 21 Jan 2012 17:37:25 +0000 (18:37 +0100)]
Finalize changelog for 0.8 Release
Reinhard Tartler [Sat, 21 Jan 2012 13:54:31 +0000 (14:54 +0100)]
Prepare for 0.8 Release
Janne Grunau [Wed, 18 Jan 2012 09:53:41 +0000 (10:53 +0100)]
threads: change the default for threads back to 1
Using threaded decoding by default breaks backward compatibility if
AVHWAccel is used or if an appliction sets threadunsafe callbacks.
Avconv and avplay still use -threads auto if not specified.
Janne Grunau [Fri, 20 Jan 2012 12:37:00 +0000 (13:37 +0100)]
threads: update slice_count and slice_offset from user context
They are used to signal the number of slices and offsets of each slice
out of band to the decoder.
Martin Storsjö [Sat, 21 Jan 2012 09:33:35 +0000 (11:33 +0200)]
aviocat: Remove useless includes
Also include stdlib.h explicitly - currently it is used
implicitly via avformat.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
Anton Khirnov [Sat, 21 Jan 2012 07:48:53 +0000 (08:48 +0100)]
doc/APIChanges: fill in missing dates and hashes
Anton Khirnov [Sat, 21 Jan 2012 07:40:47 +0000 (08:40 +0100)]
Revert "avserver: fix build after the next bump."
This temporarily (until 0.8 is released) reverts commit
8e1340abc316e038bb89e5a3b46e92ff58c98a88. That commit breaks shared
builds because of symbol hiding. Reverting it will enable shared builds
for 0.8
Dustin Brody [Mon, 16 Jan 2012 13:25:04 +0000 (08:25 -0500)]
mpegaudiodec: switch error detection check to AV_EF_BUFFER
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Dustin Brody [Fri, 20 Jan 2012 08:53:54 +0000 (03:53 -0500)]
lavf: rename fer option and document resulting (f_)err_detect options
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Dustin Brody [Fri, 20 Jan 2012 08:57:32 +0000 (03:57 -0500)]
lavc: rename err_filter option to err_detect and document it
Signed-off-by: Anton Khirnov <anton@khirnov.net>
John Brooks [Tue, 13 Dec 2011 00:04:14 +0000 (17:04 -0700)]
mpegvideo: fix invalid memory access for small video dimensions
When either video dimension is only one macroblock, subtractions
based on v_edge_pos and the macroblock size may be negative. In
that situation, an unsigned comparison isn't sufficent to test for
MV overruns, because a limit of (unsigned)-1 will let any other
value pass.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Martin Storsjö [Fri, 20 Jan 2012 18:48:19 +0000 (20:48 +0200)]
movenc: Reorder entries in the MOVIentry struct, for tigheter packing
Originally, sizeof(struct MOVIentry) was 48, after the reordering,
it is 40 in my build configuration.
When writing really long mov/mp4 files, this can make a difference
- this saves a bit over 2 MB of memory per hour of video (down to
10.3 MB per hour from 12.3 MB per hour initially) for a video with
75 packets per second - 25 fps + 50 audio packets (which is the
case for AMR audio).
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 20 Jan 2012 14:57:23 +0000 (16:57 +0200)]
rtsp: Remove extern declarations for variables that don't exist
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Fri, 20 Jan 2012 20:53:18 +0000 (22:53 +0200)]
aviocat: Flush the output before closing
Without this, the end of the file might not be transmitted/written.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 19 Jan 2012 12:01:19 +0000 (14:01 +0200)]
Add a tool that uses avio to read and write, doing a plain copy of data
It also optionally can throttle its operation to a particular
speed, to simulate realtime writing.
Signed-off-by: Martin Storsjö <martin@martin.st>
Felipe Contreras [Fri, 20 Jan 2012 16:01:07 +0000 (16:01 +0000)]
ARM: fix build with FFT enabled and MDCT disabled
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Janne Grunau [Wed, 18 Jan 2012 19:32:32 +0000 (20:32 +0100)]
lavf: force single-threaded decoding in avformat_find_stream_info
The H.264 decoder needs SPS and PPS for initialization during
multi-threaded decoding. When probed single-threaded SPS and PPS are
copied to extradata and are available for proper initialization of
the decoder before the first frame is decoded.
Dustin Brody [Wed, 18 Jan 2012 09:16:42 +0000 (04:16 -0500)]
avidec: migrate last of lavf from FF_ER_* to AV_EF_*
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Anton Khirnov [Thu, 12 Jan 2012 08:51:23 +0000 (09:51 +0100)]
avserver: fix build after the next bump.
Jindřich Makovička [Wed, 18 Jan 2012 21:07:22 +0000 (22:07 +0100)]
mpeg12: check for available bits to avoid an infinite loop
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Diego Biurrun [Wed, 11 Jan 2012 12:42:17 +0000 (13:42 +0100)]
fate: add some shorthands to run groups of tests
Diego Biurrun [Wed, 11 Jan 2012 12:37:29 +0000 (13:37 +0100)]
fate: Give some tests more sensible names.
Diego Biurrun [Wed, 18 Jan 2012 22:00:12 +0000 (23:00 +0100)]
cosmetics: Rename ffsink to avsink.
Gaurav Narula [Wed, 18 Jan 2012 19:54:04 +0000 (20:54 +0100)]
avprobe, cmdutils: K&R formatting cosmetics
Gaurav Narula [Wed, 18 Jan 2012 19:51:54 +0000 (20:51 +0100)]
tests: K&R formatting cosmetics for test programs
Anton Khirnov [Wed, 18 Jan 2012 07:07:40 +0000 (08:07 +0100)]
lavf: free packets for muxers implementing interleave_packet().
Fixes a memleak.