hw/char/xilinx_uartlite: Expose XILINX_UARTLITE QOM type

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/char/pl011: Open-code pl011_luminary_create()

pl011_luminary_create() is only used for the Stellaris board,
open-code it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/char/pl011: Un-inline pl011_create()

pl011_create() is only used in DeviceRealize handlers,
not a hot-path. Inlining is not justified.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/gpio/max7310: Simplify max7310_realize()

Since &I2C_SLAVE(dev)->qdev == dev, no need to go back and
forth with QOM type casting. Directly use 'dev'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230220115114.25237-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/avocado: add machine:none tag to version.py

This test currently fails when run on a host for which the QEMU target
has no default machine set:

ERROR| Output: qemu-system-aarch64: No machine specified, and there is
no default

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

cpu-defs.h: Expose CPUTLBEntryFull to non-TCG code

This struct has no dependencies on TCG code and it is being used in
target/arm/ptw.c to simplify the passing around of page table walk
results. Those routines can be reached by KVM code via the gdbstub
breakpoint code, so take the structure out of CONFIG_TCG to make it
visible when building with --disable-tcg.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Don't access TCG code when debugging with KVM

When TCG is disabled this part of the code should not be reachable, so
wrap it with an ifdef for now.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Move regime_using_lpae_format into internal.h

This function is needed by common code (ptw.c), so move it along with
the other regime_* functions in internal.h. When we enable the build
without TCG, the tlb_helper.c file will not be present.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Move hflags code into the tcg directory

The hflags are used only for TCG code, so introduce a new file
hflags.c to keep that code.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Wrap arm_rebuild_hflags calls with tcg_enabled

This is in preparation to moving the hflags code into its own file
under the tcg/ directory.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Move psci.c into the tcg directory

Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: move helpers to tcg/

Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: move translate modules to tcg/

Introduce the target/arm/tcg directory. Its purpose is to hold the TCG
code that is selected by CONFIG_TCG.

Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Wrap TCG-only code in debug_helper.c

The next few patches will move helpers under CONFIG_TCG. We'd prefer
to keep the debug helpers and debug registers close together, so
rearrange the file a bit to be able to wrap the helpers with a TCG
ifdef.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Wrap breakpoint/watchpoint updates with tcg_enabled

This is in preparation for restricting compilation of some parts of
debug_helper.c to TCG only.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

include/hw/arm/allwinner-a10.h: Remove superfluous includes from the header

pci_device.h is not needed at all in allwinner-a10.h, and serial.h
is only needed by the corresponding .c file.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230215152233.210024-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-riscv-to-apply-20230224' of github.com:palmer-dabbelt/qemu into staging

Fourth RISC-V PR for QEMU 8.0, Attempt 2

* A triplet of cleanups to the kernel/initrd loader that avoids
  duplication between the various boards.
* Weiwei Li, Daniel Henrique Barboza, and Liu Zhiwei have been added as
  reviewers.  Thanks for the help!
* A fix for PMP matching to avoid incorrectly appling the default
  permissions on PMP permission violations.
* A cleanup to avoid an unnecessary avoid env_archcpu() in
  cpu_get_tb_cpu_state().
* Fixes for the vector slide instructions to avoid truncating 64-bit
  values (such as doubles) on 32-bit targets.

# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmP5Br8THHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYiT4RD/9hdSlQlR1g/2h4fbCJ3U0GvyNH0T7N
# mt3AX8hFvmfR1O63qqVVebJSHM1dTm6WsA19vKE5tdtbjV5V8UZuBTSqYeRBSrLd
# LK9IHhwv3k9OQ/EG8CgRo7HEMxAurpC26zTf3chnfwa1Wyl5XxCXNx5hPbhu18G9
# oxw0sBi51T0Tb+N6lOVVSfmiEZWLXRq+lDCZdV0j864brsSjo4x8VEGrLaFTOJLf
# X4MW6vBI4Pcb7EGnHjj5WvRKsf8gdahdx8bSTjORIm8oGri9Iyw6Vrg2khuhjnuH
# 99sD1O06cvrylp+sCOVei8H3S6/xCepQXUXnCBCd1/cetgV+olo+ZR78Z8ZjXPED
# jhZ23lsDcge+4W141lsCiwLgzI0YO3Ac+84zQLIvcx16c8zow3G9FO9sTlBSsgnW
# 0XJrsUF7AZB6quUSMytG7WK+OBizzCRwj7ItC+Mty68wLrei5lDVj8b0t8hAQEdr
# dOb7jku+Dz8OspGZx1aDKKifGDO+Ppv4PjAM2G44OmkM824SvvFg8+FEr9NgbKbp
# VgTZDCeVC6IEpzthKsK8WeompLo7Sc33KITqwMbGiyGs+gsnmgKP2bcTLF8YTlFk
# dqFBWjo3tjH5oukgTLCSYY4xPaHR9q418vGAfRox15GtUVliQ9iL5oH47PVXg4U7
# YsNZ74nD1pUueg==
# =Umli
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Feb 2023 18:49:35 GMT
# gpg:                using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg:                issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg:                 aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88  6DF8 EF4C A150 2CCB AB41
#      Subkey fingerprint: 2B3C 3747 4468 43B2 4A94  3A7A 2E13 19F3 5FBB 1889

* tag 'pull-riscv-to-apply-20230224' of github.com:palmer-dabbelt/qemu:
  target/riscv: Fix vslide1up.vf and vslide1down.vf
  target/riscv: avoid env_archcpu() in cpu_get_tb_cpu_state()
  target/riscv: Smepmp: Skip applying default rules when address matches
  MAINTAINERS: Add some RISC-V reviewers
  target/riscv: Remove privileged spec version restriction for RVV
  hw/riscv/boot.c: make riscv_load_initrd() static
  hw/riscv/boot.c: consolidate all kernel init in riscv_load_kernel()
  hw/riscv: handle 32 bit CPUs kernel_entry in riscv_load_kernel()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging

Block layer patches

- Lock the graph, part 2 (BlockDriver callbacks)
- virtio-scsi: fix SCSIDevice hot unplug with IOThread
- rbd: Add support for layered encryption

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmP3tUURHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZQkA/9HFBrcsfSyzU5sHXcpqrcVPsvFwwzhsXN
# V6zMvBXQVEMYo6oDBSyNrniOJSYjiFLm1c+bMAaAFbo8dvVqqlkecBuZgQkFjnCy
# vXyaYeWnBSG5A91Vs30qzLObBsrX7P1Gh+bvtRvBPThC1zd8lrxMbVzlsxnTfDFo
# DsPkgiXL0SZ6YLBN5s61GBCfjvF8i0/8TPAvvwhHEo15sBgcBSTFYSftzEe9TXmH
# NHAuHnRshrd9DNnf20tVPuHCanSTsIpbx5cLYBoy81vSbjqJG4agULZLltKP3fiM
# kadpqmhJwjq+KhioLmcIjevPnUuqOMEzubaxZUm9o8jjsFPa8Isv4sIaAxyUP6e6
# aze1Xh9vUXn/JEf2/hApUY+2rz5dREL/TqpFwyzZjdqJb8PVCuy1JA1m2zLkvRPd
# Bl9pS7kabhcZOHrITnJS7Lvyy4IWeiw78trtaer0nCbKbPdQB62eswSXKYh5g+Ke
# kVJbkRSNi6lnljK5egIR3VxxM5kbGZsY4aGuyZk3Lc5yeAuPOil9swHlSO+5LFxP
# lRZOyumHbfKU6J7JbGFErrqR2fZiqKUN/6i0HZAIcjpZq1QxXlmHBbmrkXao+j5Y
# 0WcHdduH65dHT8fnBMgDZCXUfV7iBufspkCmY1v50YNJRPNmDzb4Os/Jh9qLHHMQ
# M1ae+58T0Fo=
# =gOli
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 23 Feb 2023 18:49:41 GMT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (29 commits)
  block/rbd: Add support for layered encryption
  block/rbd: Add luks-any encryption opening option
  block/rbd: Remove redundant stack variable passphrase_len
  virtio-scsi: reset SCSI devices from main loop thread
  dma-helpers: prevent dma_blk_cb() vs dma_aio_cancel() race
  scsi: protect req->aiocb with AioContext lock
  block: Mark bdrv_co_refresh_total_sectors() and callers GRAPH_RDLOCK
  block: Mark bdrv_*_dirty_bitmap() and callers GRAPH_RDLOCK
  block: Mark bdrv_co_delete_file() and callers GRAPH_RDLOCK
  block: Mark bdrv_(un)register_buf() GRAPH_RDLOCK
  block: Mark bdrv_co_eject/lock_medium() and callers GRAPH_RDLOCK
  block: Mark bdrv_co_is_inserted() and callers GRAPH_RDLOCK
  block: Mark bdrv_co_io_(un)plug() and callers GRAPH_RDLOCK
  block: Mark bdrv_co_create() and callers GRAPH_RDLOCK
  block: Mark preadv_snapshot/snapshot_block_status GRAPH_RDLOCK
  block: Mark bdrv_co_copy_range() GRAPH_RDLOCK
  block: Mark bdrv_co_do_pwrite_zeroes() GRAPH_RDLOCK
  block: Mark bdrv_co_pwrite_sync() and callers GRAPH_RDLOCK
  block: Mark public read/write functions GRAPH_RDLOCK
  block: Mark read/write in block/io.c GRAPH_RDLOCK
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-error-2023-02-23' of https://repo.or.cz/qemu/armbru into staging

Error reporting patches patches for 2023-02-23

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmP3ZogSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZT+PsP/ibioHJkJiR8yMt2/2iSwpkMrphZDmRQ
# 5sAgxCARdcp0m7maH4McCFkgtERcROip+j98FV29qI4y2P/mLkt1jyMYC+TH9r4O
# X3G997526gzZBLIJJsnYlVlJ1Gbgn+uCy4AzRLuhaKAHsYoxkP0jygoSs/eIZ9tK
# Wg2tkQ/wY4bXihrlzdOpWqU3Y0ADo2PQ29p7HWheRMDQz6JQxq82hFFs1jgGQ1aq
# 4HmcpIMX0+/LshFbDU91dL1pxW17vWT9J3xtzAsWlfBBgAh257LKvJqVD0XojL04
# FxJZ05IqTXZ04gvwgji0dcvNjdmP/dXVoGLfxAYwCFtKxiig700bdNb0+6MjCT6u
# P2tSPyQQzNQ5LYI7AgER4kMyXK22RkBXx+Q7y7QK1YXszWWSmGFZWGLA2FSg4lO6
# 5jsCgtEGixsMym/ox3XeoywSh4BgWkNXC+gKMSg/hQXgfriQmndHUOlK0ZU95I43
# 7gnPol+pU1HIEy/GDU8oMyieG513Ti1KVPZyv/FbuW75AYUDlHAXH/5OFlsuaLIR
# 1QF449xCLR5vIOOLXHbKJ9jbkcAaidhq5pOhLr7oV3yKh4H53iNB7gy8+vJ6XtBf
# tXXcYPVD8LpZxDegKNpIaeT0Nr4pyy6bYfrF+YeisVotD6PDtPALfJ9eSCWjaQsl
# DG2opOfv5xuV
# =VRxu
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 23 Feb 2023 13:13:44 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* tag 'pull-error-2023-02-23' of https://repo.or.cz/qemu/armbru:
  rocker: Tweak stubbed out monitor commands' error messages
  migration/colo: Improve an x-colo-lost-heartbeat error message
  hw/core: Improve the query-hotpluggable-cpus error message
  replay: Simplify setting replay blockers
  qga: Drop dangling reference to QERR_QGA_LOGGING_DISABLED
  hw/acpi: Move QMP command to hw/core/
  hw/acpi: Dumb down acpi_table_add() stub
  hw/smbios: Dumb down smbios_entry_add() stub
  hw/core: Improve error message when machine doesn't provide NMIs
  dump: Assert cpu_get_note_size() can't fail
  dump: Improve error message when target doesn't support memory dump
  error: Drop superfluous #include "qapi/qmp/qerror.h"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-qapi-2023-02-23' of https://repo.or.cz/qemu/armbru into staging

QAPI patches patches for 2023-02-23

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmP3VikSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTf98P/1tf2tPnWL0QpGXqGOq/iy2cFhcoco06
# 30t4JzTZGMZv8aUBRzlnhNgp+C7uMnXxuO7DeVN/K8VCvRfGXYz1HYFJ0NWhhMz6
# RULvVncJ7m9vFykmu3iibxvjyH6uj0R5xJ8ZNIrySLTCu+58voDF/IbZ0ep3v5nX
# 1AV1ljL9taxg2SrQ53Whbet9zfgXVFnV5wLKkLOqLGvviO2OBPG7rrtQaEX2jrsa
# SdTiOdBk1IMvG3FT6cVx3bM3kQd15UwfcJsdIYpB7QBZNoqgiyfMPsNr8HzpZlJn
# KOe3qWVFWHGMWY4MtQ1j9Ph44RPrJybvPQRMDNB3CiDYEtBWsth0fZxhw9T/tKca
# 5KgJaxecB3UsXFUBWhmvhkw+hwG+cDWHtiYZSb9AX4cqvPid1UdLnSQFWgHFGX+2
# ok0Q7gy9jYEpteVbIM8kQG0TF7xnZlv99uDK8b4MAH33roXwy70vffxpRGnngNyH
# IcLvzmDqRlrlzdvUi8Uro22VmUAUqSQKxKYt9yBJcEUV9NLi8E6g+Hcrvt7YNF9V
# jcVub4aIawEZCvnPCpOgzHD9p26ofwb2WQ245/5kzMUVi2pBYsHH6hJj7WdMPixS
# r24Ykgo4sxujW4pVy45lXzpA8uKWELCp9iKUOO6hvdoJEybVDMj9zcVn70cJgDrE
# RUle5av0n8XR
# =XV0D
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 23 Feb 2023 12:03:53 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* tag 'pull-qapi-2023-02-23' of https://repo.or.cz/qemu/armbru:
  qapi: remove JSON value FIXME
  qapi: remove _JSONObject
  qapi/parser: add QAPIExpression type
  qapi: Add minor typing workaround for 3.6
  qapi: update pylint configuration
  qapi: Update flake8 config
  docs/devel/qapi-code-gen: Fix a missing 'may', clarify SchemaInfo
  docs/devel/qapi-code-gen: Belatedly update features documentation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'python-pull-request' of https://gitlab.com/jsnow/qemu into staging

Python

Only minor testing updates.

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+ber27ys35W+dsvQfe+BBqr8OQ4FAmP27UcACgkQfe+BBqr8
# OQ5xSBAAlh+PSySlKnqxJm9dVi+K+8o6KOf9Oq0TAO+1lSEdAN0yMTW81TNAk50S
# HWTk2CclPVCrNxmvR1zr7ibp1BJvWLtfqcBSh+e3XQ1pPpciS2L+ny2OtuNYH5G5
# qSfLxoOXqV57gHdwkWmtC1b3AsnpcgdH84r4gUIaVPWx4fvm/JBVa0R40OjWaEZ6
# gTteIqoXN/tusBk6+ssELcNAA6jlHcVbhzS31Xi1/GDAWiu4wehqQ30zbFwvpyHn
# QN0NKeh1L6cGtjfN2PHv6tji5Z479yKYQU861BCn8SEJ052f4qLb/GBT01Fx3h+7
# 6bonnNXQrnyBNXWotYadTZMreUdDokuPF7FV4dNqd9E+552aF7WhodueO0lyyaTv
# bPHFavgyfNhfPblYqLpAWiPt+BlkZNazeWTAyRaQCqA1zHOr44K0ff1vVBGGvA2/
# xd0zGJ8xGiagz4ifIpyb3Fk9fampZkMAlJjKDfhhQzDdm/mrtdOt2uZBT2IhYX7z
# E+2+WfRE98kgAy17pzVB5GPRm+yFzWiu7H7zpGu4nQzswLWrKPrdwq8XYOZ16fL8
# NAKbn6h6CS0sOYiArr3tzQSnzBlaKCmOalsNjNCeFbuH4vTmKGamohpAW/OoBxhN
# 1X3aCdXqW0ewBrLWVHfluM0mhbq6i9ycYGi24pTikFPBqJCQP2o=
# =FJCZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 23 Feb 2023 04:36:23 GMT
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* tag 'python-pull-request' of https://gitlab.com/jsnow/qemu:
  python: drop pipenv
  python: support pylint 2.16

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* x86 bugfixes
* OpenBSD support for naming threads
* Refined Python support policy

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP0wtkUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNI6QgAjMvEV0N5FZYMpiuQdjebBeV+uHM6
# LThewCQa0cW5jb1X1NFBbOxYlNfE3WQeZqQF+BiVJr5wT2UsyNsPH7wTjsP387vV
# juoD7D/XZo8P4Qi+vJWo8XVBrzWEK8QS1P+NxWr+ZnsAhDx2+MR87fVmHtVBW1pI
# oDO0iyRrvVtaTAIVyNWSgZ59SLMmcH/6L4aYv5nrKYuAWx7fTneGGheKuqk55RsV
# sMv+fHolmmwKVm8tMFksw0atPwL7ZmSm1uObNHCQKdDNSoakC7YpaXa3y8LEzU7I
# B4h/PsmRpN33ggvsiuzFp9kfEHMy4QazfpoVFFqTLalhTr+XuiNTxj8xdA==
# =6eNN
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Feb 2023 13:10:49 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
  target/i386/gdbstub: Fix a bug about order of FPU stack in 'g' packets.
  docs: build-platforms: refine requirements on Python build dependencies
  thread-posix: add support for setting threads name on OpenBSD
  target/i386: Fix 32-bit AD[CO]X insns in 64-bit mode

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-tcg-20230221' of https://gitlab.com/rth7680/qemu into staging

tcg: Allow first half of insn in ram, and second half in mmio
linux-user/sparc: SIGILL for unknown trap vectors
linux-user/microblaze: SIGILL for privileged insns
linux-user: Fix deadlock while exiting due to signal
target/microblaze: Add gdbstub xml
util: Adjust cacheflush for windows-arm64
include/sysemu/os-win32: Adjust setjmp/longjmp for windows-arm64

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmP1dpkdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+70gf+OOM3KmsFpsJ4+68W
# v/ulVwye3RFQXv4KRtuRPeKCKMk7vXmBRj9gsyOpc23TaoYiMNbFbztpAkcc/Z/1
# +6H8QeZGLWDqiX6ashwGNm/2bqPbvY7znaCvNuLkNGCPBeJ12C19uN1BBiGdeqOe
# IXIIk1r0U6rfIDhP2PJALXOxgHd/8/onYbhU6kU5tQjM24pycW44UUGPSeV++I0e
# xWezAYOmZ4PK58bXHDPMZ0UkzuefaNmiLlfwj/4nlaWQetwQTy7BeEU6FpKolUN2
# wrvfCqth/c3SdUaZHu4DoX1yWt72L37SpO0ijvk8E+AqsvXTn9gFdWK2dsEiPEeS
# Z9abFw==
# =dxZo
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 Feb 2023 01:57:45 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* tag 'pull-tcg-20230221' of https://gitlab.com/rth7680/qemu:
  sysemu/os-win32: fix setjmp/longjmp on windows-arm64
  util/cacheflush: fix cache on windows-arm64
  target/microblaze: Add gdbstub xml
  linux-user/microblaze: Handle privileged exception
  cpus: Make {start,end}_exclusive() recursive
  linux-user: Always exit from exclusive state in fork_end()
  linux-user/sparc: Raise SIGILL for all unhandled software traps
  accel/tcg: Allow the second page of an instruction to be MMIO

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/riscv: Fix vslide1up.vf and vslide1down.vf

vslide1up_##BITWIDTH is used by the vslide1up.vx and vslide1up.vf. So its
scalar input should be uint64_t to hold the 64 bits float register.And the
same for vslide1down_##BITWIDTH.

This bug is caught when run these instructions on qemu-riscv32.

Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230213094550.29621-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

target/riscv: avoid env_archcpu() in cpu_get_tb_cpu_state()

We have a RISCVCPU *cpu pointer available at the start of the function.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230210123836.506286-1-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

target/riscv: Smepmp: Skip applying default rules when address matches

When MSECCFG.MML is set, after checking the address range in PMP if the
asked permissions are not same as programmed in PMP, the default
permissions are applied. This should only be the case when there
is no matching address is found.

This patch skips applying default rules when matching address range
is found. It returns the index of the match PMP entry.

Fixes: 824cac681c3 (target/riscv: Fix PMP propagation for tlb)
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230209055206.229392-1-hchauhan@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

MAINTAINERS: Add some RISC-V reviewers

This patch adds some active RISC-V members as reviewers to the
MAINTAINERS file.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-Id: <20230209003308.738237-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

target/riscv: Remove privileged spec version restriction for RVV

The RVV specification does not require that the core needs to support
the privileged specification v1.12.0 to support RVV, and there is no
dependency from ISA level.

This commit removes the restriction from both RVV CSRs and extension CPU
ISA string.

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230208063209.27279-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

block/rbd: Add support for layered encryption

Starting from ceph Reef, RBD has built-in support for layered encryption,
where each ancestor image (in a cloned image setting) can be possibly
encrypted using a unique passphrase.

A new function, rbd_encryption_load2, was added to librbd API.
This new function supports an array of passphrases (via "spec" structs).

This commit extends the qemu rbd driver API to use this new librbd API,
in order to support this new layered encryption feature.

Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20230129113120.722708-4-oro@oro.sl.cloud9.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block/rbd: Add luks-any encryption opening option

Ceph RBD encryption API required specifying the encryption format
for loading encryption. The supported formats were LUKS (v1) and LUKS2.

Starting from Reef release, RBD also supports loading with "luks-any" format,
which works for both versions of LUKS.

This commit extends the qemu rbd driver API to enable qemu users to use
this luks-any wildcard format.

Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20230129113120.722708-3-oro@oro.sl.cloud9.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block/rbd: Remove redundant stack variable passphrase_len

Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20230129113120.722708-2-oro@oro.sl.cloud9.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

virtio-scsi: reset SCSI devices from main loop thread

When an IOThread is configured, the ctrl virtqueue is processed in the
IOThread. TMFs that reset SCSI devices are currently called directly
from the IOThread and trigger an assertion failure in blk_drain() from
the following call stack:

virtio_scsi_handle_ctrl_req -> virtio_scsi_do_tmf -> device_code_reset
-> scsi_disk_reset -> scsi_device_purge_requests -> blk_drain

  ../block/block-backend.c:1780: void blk_drain(BlockBackend *): Assertion `qemu_in_main_thread()' failed.

The blk_drain() function is not designed to be called from an IOThread
because it needs the Big QEMU Lock (BQL).

This patch defers TMFs that reset SCSI devices to a Bottom Half (BH)
that runs in the main loop thread under the BQL. This way it's safe to
call blk_drain() and the assertion failure is avoided.

Introduce s->tmf_bh_list for tracking TMF requests that have been
deferred to the BH. When the BH runs it will grab the entire list and
process all requests. Care must be taken to clear the list when the
virtio-scsi device is reset or unrealized. Otherwise deferred TMF
requests could execute later and lead to use-after-free or other
undefined behavior.

The s->resetting counter that's used by TMFs that reset SCSI devices is
accessed from multiple threads. This patch makes that explicit by using
atomic accessor functions. With this patch applied the counter is only
modified by the main loop thread under the BQL but can be read by any
thread.

Reported-by: Qing Wang <qinwang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230221212218.1378734-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

dma-helpers: prevent dma_blk_cb() vs dma_aio_cancel() race

dma_blk_cb() only takes the AioContext lock around ->io_func(). That
means the rest of dma_blk_cb() is not protected. In particular, the
DMAAIOCB field accesses happen outside the lock.

There is a race when the main loop thread holds the AioContext lock and
invokes scsi_device_purge_requests() -> bdrv_aio_cancel() ->
dma_aio_cancel() while an IOThread executes dma_blk_cb(). The dbs->acb
field determines how cancellation proceeds. If dma_aio_cancel() sees
dbs->acb == NULL while dma_blk_cb() is still running, the request can be
completed twice (-ECANCELED and the actual return value).

The following assertion can occur with virtio-scsi when an IOThread is
used:

  ../hw/scsi/scsi-disk.c:368: scsi_dma_complete: Assertion `r->req.aiocb != NULL' failed.

Fix the race by holding the AioContext across dma_blk_cb(). Now
dma_aio_cancel() under the AioContext lock will not see
inconsistent/intermediate states.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230221212218.1378734-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

scsi: protect req->aiocb with AioContext lock

If requests are being processed in the IOThread when a SCSIDevice is
unplugged, scsi_device_purge_requests() -> scsi_req_cancel_async() races
with I/O completion callbacks. Both threads load and store req->aiocb.
This can lead to assert(r->req.aiocb == NULL) failures and undefined
behavior.

Protect r->req.aiocb with the AioContext lock to prevent the race.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230221212218.1378734-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_refresh_total_sectors() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_refresh_total_sectors() need to hold a reader lock for the
graph.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-24-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_*_dirty_bitmap() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_*_dirty_bitmap() need to hold a reader lock for the graph.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-23-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_delete_file() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_delete_file() need to hold a reader lock for the graph.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-22-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_(un)register_buf() GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_register_buf() and bdrv_unregister_buf() need to hold a reader lock
for the graph.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-21-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_eject/lock_medium() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_eject() and bdrv_co_lock_medium() need to hold a reader lock for
the graph.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-20-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_is_inserted() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_is_inserted() need to hold a reader lock for the graph.

blk_is_inserted() is done as a co_wrapper_mixed_bdrv_rdlock (unlike most
other blk_* functions) because it is called a lot from other blk_co_*()
functions that already hold the lock. These calls go through
blk_is_available(), which becomes a co_wrapper_mixed_bdrv_rdlock, too,
for the same reason.

Functions that run in a coroutine and can call bdrv_co_is_available()
directly are changed to do so, which results in better TSA coverage.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-19-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_io_(un)plug() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_io_plug() and bdrv_co_io_unplug() need to hold a reader lock for
the graph.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-18-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_create() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_create() need to hold a reader lock for the graph.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-17-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark preadv_snapshot/snapshot_block_status GRAPH_RDLOCK

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-16-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_copy_range() GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_copy_range() need to hold a reader lock for the graph.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-15-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_do_pwrite_zeroes() GRAPH_RDLOCK

All callers are already GRAPH_RDLOCK, so just add the annotation and
remove assume_graph_lock().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-14-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_pwrite_sync() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_sync() need to hold a reader lock for the graph.

For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-13-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark public read/write functions GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pread*/pwrite*() need to hold a reader lock for the graph.

For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark read/write in block/io.c GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_driver_*() need to hold a reader lock for the graph. It doesn't add
the annotation to public functions yet.

For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_pwrite_zeroes() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_zeroes() need to hold a reader lock for the graph.

For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_pdiscard() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pdiscard() need to hold a reader lock for the graph.

For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-9-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_flush() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_flush() need to hold a reader lock for the graph.

For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block/qed: add missing graph rdlock in qed_need_check_timer_entry

This function is called in two different places:
- timer callback, which does not take the graph rdlock.
- bdrv_qed_drain_begin(), which is .bdrv_drain_begin()
  callback documented as function that does not take the lock.

Since it calls recursive functions that traverse the
graph, we need to protect them with the graph rdlock.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_ioctl() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_ioctl() need to hold a reader lock for the graph.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-6-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_block_status() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_block_status() need to hold a reader lock for the graph.

For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Mark bdrv_co_truncate() and callers GRAPH_RDLOCK

This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_truncate() need to hold a reader lock for the graph.

For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

mirror: Fix access of uninitialised fields during start

bdrv_mirror_top_pwritev() accesses the job object when active mirroring
is enabled. It disables this code during early initialisation while
s->job isn't set yet.

However, s->job is still set way too early when the job object isn't
fully initialised. For example, &s->ops_in_flight isn't initialised yet
and the in_flight bitmap doesn't exist yet. This causes crashes when a
write request comes in too early.

Move the assignment of s->job to when the mirror job is actually fully
initialised to make sure that the mirror_top driver doesn't access it
too early.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Make bdrv_can_set_read_only() static

It is never called outside of block.c.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-2-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

rocker: Tweak stubbed out monitor commands' error messages

The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.

The stubbed out Rocker monitor commands are the last remaining users
of QERR_FEATURE_DISABLED.  They fail like this:

    (qemu) info rocker mumble
    Error: The feature 'rocker' is not enabled

The real rocker commands fail like this when the named object doesn't
exist:

    Error: rocker mumble not found

If that's good enough when Rocker is enabled, then it's good enough
when it's disabled, so replace QERR_FEATURE_DISABLED with that, and
drop the macro.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-13-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>

migration/colo: Improve an x-colo-lost-heartbeat error message

The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.

Get rid of a use of QERR_FEATURE_DISABLED, and improve the somewhat
imprecise error message

    (qemu) x_colo_lost_heartbeat
    Error: The feature 'colo' is not enabled

to

    Error: VM is not in COLO mode

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-12-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>

hw/core: Improve the query-hotpluggable-cpus error message

The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.

Get rid of a use of QERR_FEATURE_DISABLED, and improve the slightly
awkward error message

    (qemu) info hotpluggable-cpus
    Error: The feature 'query-hotpluggable-cpus' is not enabled

to

    Error: machine does not support hot-plugging CPUs

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-11-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

replay: Simplify setting replay blockers

replay_add_blocker() takes an Error *.  All callers pass one created
like this:

    error_setg(&blocker, QERR_REPLAY_NOT_SUPPORTED, "some feature");

Folding this into replay_add_blocker() simplifies the callers, losing
a bit of generality we haven't needed in more than six years.

Since there are no other uses of macro QERR_REPLAY_NOT_SUPPORTED,
replace the remaining one by its expansion, and drop the macro.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

qga: Drop dangling reference to QERR_QGA_LOGGING_DISABLED

slog()'s function comment advises to use QERR_QGA_LOGGING_DISABLED.
This macro never existed.  The reference got added in commit
e3d4d25206a "guest agent: add guest agent RPCs/commands" along with
QERR_QGA_LOGGING_FAILED, so maybe that one was meant.  However,
QERR_QGA_LOGGING_FAILED was never actually used, and was removed in
commit d73f0beadb5 "qerror.h: Remove unused error classes".

Drop the dangling reference.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-9-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>

hw/acpi: Move QMP command to hw/core/

The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.

qmp_query_vm_generation_id() in stubs/vmgenid.c is the last user of
QERR_UNSUPPORTED outside qga/.  Unlike the stubs we just dropped, it
is actually reachable, namely when CONFIG_ACPI_VMGENID is off.  It
always fails like

    (qemu) info vm-generation-id
    Error: this feature or command is not currently supported

Turns out the real qmp_query_vm_generation_id() doesn't actually
depend on CONFIG_ACPI_VMGENID, and fails safely when it's off.  Move
it to hw/core/machine-qmp-cmds.c, and drop the stub.  The error
message becomes

    Error: VM Generation ID device not found

Feels like an improvement to me.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>

hw/acpi: Dumb down acpi_table_add() stub

The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.

acpi_table_add() is only ever called on behalf of CLI option
-acpitable.  Since qemu-options.hx sets @arch_mask to QEMU_ARCH_I386,
it is reachable only for these targets.  Since they provide a real
acpi_table_add(), the stub is unreachable.

There's no point in unreachable code keeping QERR_UNSUPPORTED alive.
Dumb it down to g_assert_not_reached().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>

hw/smbios: Dumb down smbios_entry_add() stub

The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.

smbios_entry_add() is only ever called on behalf of CLI option
-smbios.  Since qemu-options.hx sets @arch_mask to QEMU_ARCH_I386 |
QEMU_ARCH_ARM, it is reachable only for these targets.  Since they
provide a real smbios_entry_add(), the stub is unreachable.

There's no point in unreachable code keeping QERR_UNSUPPORTED alive.
Dumb it down to g_assert_not_reached().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-6-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>

hw/core: Improve error message when machine doesn't provide NMIs

The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.

Get rid of a use of QERR_UNSUPPORTED, and improve the rather vague
error message

    (qemu) nmi
    Error: this feature or command is not currently supported

to

    Error: machine does not provide NMIs

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>

dump: Assert cpu_get_note_size() can't fail

The only way cpu_get_note_size() can return a negative value is
integer overflow in the non-stub versions, which is a programming
error.  The stub version is not actually reachable, because the
cpu_get_dump_info() stub will fail first.  Use assert().  This gets
rid of another use of QERR_UNSUPPORTED.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>

dump: Improve error message when target doesn't support memory dump

The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.

Get rid of a use of QERR_UNSUPPORTED, and improve the rather vague
error message

    (qemu) dump-guest-memory mumble
    Error: this feature or command is not currently supported

to

    Error: dumping guest memory is not supported on this target

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Error message tweaked]

error: Drop superfluous #include "qapi/qmp/qerror.h"

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>

qapi: remove JSON value FIXME

With the two major JSON-ish type hierarchies clarified for distinct
purposes; QAPIExpression for parsed expressions and JSONValue for
introspection data, remove this FIXME as no longer an action item.

A third JSON-y data type, _ExprValue, is not meant to represent JSON in
the abstract but rather only the possible legal return values from a
single function, get_expr(). It isn't appropriate to attempt to merge it
with either of the above two types.

In theory, it may be possible to define a completely agnostic
one-size-fits-all JSON type hierarchy that any other user could borrow -
in practice, it's tough to wrangle the differences between invariant,
covariant and contravariant types: input and output parameters demand
different properties of such a structure.

However, QAPIExpression serves to authoritatively type user input to the
QAPI parser, while JSONValue serves to authoritatively type qapi
generator *output* to be served back to client users at runtime via
QMP. The AST for these two types are different and cannot be wholly
merged into a unified syntax.

They could, in theory, share some JSON primitive definitions. In
practice, this is currently more trouble than it's worth with mypy's
current expressive power. As such, declare this "done enough for now".

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230215000011.1725012-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

qapi: remove _JSONObject

We can remove this alias as it only has two usages now, and no longer
pays for the confusion of "yet another type".

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230215000011.1725012-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>

qapi/parser: add QAPIExpression type

This patch creates a new type, QAPIExpression, which represents a parsed
expression complete with QAPIDoc and QAPISourceInfo.

This patch turns parser.exprs into a list of QAPIExpression instead,
and adjusts expr.py to match.

This allows the types we specify in parser.py to be "remembered" all the
way through expr.py and into schema.py. Several assertions around
packing and unpacking this data can be removed as a result.

It also corrects a harmless typing error.  Before the patch,
check_exprs() allegedly takes a List[_JSONObject].  It actually takes
a list of dicts of the form

    {'expr': E, 'info': I, 'doc': D}

where E is of type _ExprValue, I is of type QAPISourceInfo, and D is
of type QAPIDoc.  Key 'doc' is optional.  This is not a _JSONObject!
Passes type checking anyway, because _JSONObject is Dict[str, object].

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230215000011.1725012-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message amended to point out the typing fix]

qapi: Add minor typing workaround for 3.6

Pylint under 3.6 does not believe that Collection is subscriptable at
runtime. It is, making this a Pylint
bug. https://github.com/PyCQA/pylint/issues/2377

They closed it as fixed, but that doesn't seem to be true as of Pylint
2.13.9, the latest version you can install under Python 3.6. 2.13.9 was
released 2022-05-13, about seven months after the bug was closed.

The least-annoying fix here is to just use the concret type.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230215000011.1725012-4-jsnow@redhat.com>
[Dumbed down from Sequence[str] to List[str], commit message adjusted]
Reviewed-by: Markus Armbruster <armbru@redhat.com>

qapi: update pylint configuration

Newer versions of pylint disable the "no-self-use" message by
default. Older versions don't, though. If we leave the suppressions in,
pylint yelps about useless options. Just tell pylint to shush.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230215000011.1725012-3-jsnow@redhat.com>

qapi: Update flake8 config

New versions of flake8 don't like same-line comments. (It's a version
newer than what fc37 ships, but it still makes my life easier to fix it
now.)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230215000011.1725012-2-jsnow@redhat.com>

docs/devel/qapi-code-gen: Fix a missing 'may', clarify SchemaInfo

Documentation of enumeration value conditions lacks a 'may'.  Fix
that.

Clarify SchemaInfo documentation for struct and union types.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230213132009.918801-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>

docs/devel/qapi-code-gen: Belatedly update features documentation

Commit 013b4efc9be "qapi: Add feature flags to remaining
definitions" (v5.0.0), commit 84ab0086879 "qapi: Add feature flags to
struct members" (v5.0.0), and commit b6c18755e41 "qapi: Add feature
flags to enum members" (v6.2.0) neglected to update section
"Features".  Make up for that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230213132009.918801-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>

python: drop pipenv

The pipenv tool was nice in theory, but in practice it's just too hard
to update selectively, and it makes using it a pain. The qemu.qmp repo
dropped pipenv support a while back and it's been functioning just fine,
so I'm backporting that change here to qemu.git.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20230210003147.1309376-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: support pylint 2.16

Pylint 2.16 adds a few new checks that cause the optional check-tox CI
job to fail.

1. The superfluous-parens check seems to be a bit more aggressive,
2. broad-exception-raised is new; it discourages "raise Exception".

Fix these minor issues and turn the lights green.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20230210003147.1309376-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

sysemu/os-win32: fix setjmp/longjmp on windows-arm64

Windows implementation of setjmp/longjmp is done in
C:/WINDOWS/system32/ucrtbase.dll. Alas, on arm64, it seems to *always*
perform stack unwinding, which crashes from generated code.

By using alternative implementation built in mingw, we avoid doing stack
unwinding and this fixes crash when calling longjmp.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221153006.20300-3-pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util/cacheflush: fix cache on windows-arm64

ctr_el0 access is privileged on this platform and fails as an illegal
instruction.

Windows does not offer a way to flush data cache from userspace, and
only FlushInstructionCache is available in Windows API.

The generic implementation of flush_idcache_range uses,
__builtin___clear_cache, which already use the FlushInstructionCache
function. So we rely on that.

Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221153006.20300-2-pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/microblaze: Add gdbstub xml

Mirroring the upstream gdb xml files, the two stack boundary
registers are separated out.

Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/microblaze: Handle privileged exception

Follow what kernel's full_exception() is doing.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230214140829.45392-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cpus: Make {start,end}_exclusive() recursive

Currently dying to one of the core_dump_signal()s deadlocks, because
dump_core_and_abort() calls start_exclusive() two times: first via
stop_all_tasks(), and then via preexit_cleanup() ->
qemu_plugin_user_exit().

There are a number of ways to solve this: resume after dumping core;
check cpu_in_exclusive_context() in qemu_plugin_user_exit(); or make
{start,end}_exclusive() recursive. Pick the last option, since it's
the most straightforward one.

Fixes: da91c1920242 ("linux-user: Clean up when exiting due to a signal")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230214140829.45392-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: Always exit from exclusive state in fork_end()

fork()ed processes currently start with
current_cpu->in_exclusive_context set, which is, strictly speaking, not
correct, but does not cause problems (even assertion failures).

With one of the next patches, the code begins to rely on this value, so
fix it by always calling end_exclusive() in fork_end().

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230214140829.45392-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user/sparc: Raise SIGILL for all unhandled software traps

The linux kernel's trap tables vector all unassigned trap
numbers to BAD_TRAP, which then raises SIGILL.

Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Allow the second page of an instruction to be MMIO

If an instruction straddles a page boundary, and the first page
was ram, but the second page was MMIO, we would abort.  Handle
this as if both pages are MMIO, by setting the ram_addr_t for
the first page to -1.

Reported-by: Sid Manning <sidneym@quicinc.com>
Reported-by: Jørgen Hansen <Jorgen.Hansen@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386/gdbstub: Fix a bug about order of FPU stack in 'g' packets.

Before this commit, when GDB attached an OS working on QEMU, order of FPU
stack registers printed by GDB command 'info float' was wrong. There was a
bug causing the problem in 'g' packets sent by QEMU to GDB. The packets have
values of registers of machine emulated by QEMU containing FPU stack
registers. There are 2 ways to specify a x87 FPU stack register. The first
is specifying by absolute indexed register names (R0, ..., R7). The second
is specifying by stack top relative indexed register names (ST0, ..., ST7).
Values of the FPU stack registers should be located in 'g' packet and be
ordered by the relative index. But QEMU had located these registers ordered
by the absolute index. After this commit, when QEMU reads registers to make
a 'g' packet, QEMU specifies FPU stack registers by the relative index.
Then, the registers are ordered correctly in the packet. As a result, GDB,
the packet receiver, can print FPU stack registers in the correct order.

Signed-off-by: TaiseiIto <taisei1212@outlook.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <TY0PR0101MB4285923FBE9AD97CE832D95BA4E59@TY0PR0101MB4285.apcprd01.prod.exchangelabs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging

# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJj7xKYAAoJEO8Ells5jWIRDZQH/Rao24sq3j97qE5RzekvANzq
# GnHUyLnl3yeOSNumv2BJInZTvgUpYL2etGQr3DtGRwOrr7w1vKB3zhY3V3jQefkh
# f4rsEGkamL/qM2N2cGUIUSqevo7OGnP8aQojpEi4MWWZ30B3L6jqd4NqyA1gyndV
# 1eBkpR+BY2PjcLbgvFUZEXeAn/vapE5NKULXUGhg5mMvgwYH3CgZXpqqkxr876za
# S4rZMtReXKNeid14Z35SUjJdV2WKYmo/lN9+GQxF2YNLmDC3RtuFQVm038erSqvs
# uLVSg8tiIlCyOcSDpR/BARNrxVwzlJp5X6ocapHubS/i0Rp/Zo7ezSk/XWH1gfU=
# =UbzF
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Feb 2023 05:37:28 GMT
# gpg:                using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* tag 'net-pull-request' of https://github.com/jasowang/qemu:
  vdpa: fix VHOST_BACKEND_F_IOTLB_ASID flag check
  net: stream: add a new option to automatically reconnect
  vmnet: stop recieving events when VM is stopped
  net: Increase L2TPv3 buffer to fit jumboframes
  hw/net/vmxnet3: allow VMXNET3_MAX_MTU itself as a value
  hw/net/lan9118: log [read|write]b when mode_16bit is enabled rather than abort
  net: Replace "Supported NIC models" with "Available NIC models"
  net: Restore printing of the help text with "-nic help"
  net: Move the code to collect available NIC models to a separate function

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pr-2023-02-16' of https://gitlab.com/a1xndr/qemu into staging

Replace fork-based fuzzing with reboots.
Now the fuzzers will reboot the guest between inputs.

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEE+tTiv4cTddY0BRfETmYd3lg6lk4FAmPu/LoACgkQTmYd3lg6
# lk6RHg/7BRGI5ZPXb1MmTNCC+SroQ6TT++lO4b0hbkN2HO6U+WVvfuA6+0wg+8qC
# 4bp+G1Tabpcq1MTYUuim6DBtWswgpqr0AbWNwn1eF7hya+3W9woH2POVYY2wwc7m
# S3EdwXCCKo9gGXlaNrotnbwIk+o8B4BzXOXLIlRtg26wGYhT5fkJA/BQcHKDXz37
# ctyWxlyjIM8pNCgfybMvjC7MYtp8DufPsv/rrKx9t0TM7f1jPVgXLek7t0+ZwjeY
# qz2Om2jiij1INgK9hTieWs4eHwpwre6vH2a+JKRkZ3sS7WYcj1auNKVJb3GvDqmc
# wy+Nz5Lz4+aPP19pkCYjfz5w3CqEEsSlSDn5UVRbfl2fbENSceoNwo9huMXsF1pB
# oO6NK2NxbOygmNpYxp+JEt45KFIXzUcIFQwbn8aCDODIl+0H2yu7/ll6XgELf1Pa
# P83THOaVxIxfcI9VOdt/FwDq1ZzmV5nk/BkIGJeIWNYMbU4Gze6YoaL3U8AHDxKH
# f6f3qDzcVJjqD0wKhvYcQ3kSPq+vHc/ioh6mYwos6VUEVYz/SLOY876MaSB/K4PE
# ofBV7y6HvJ6AMwg1TBg4YtOP08gWK+4sYH+I09oU40U3UcwEpkbkQTF72lPQHxFs
# 8UVRJrgWv/xzrwzXTX5ruQ633F8zuhqQTeERqksj1pPHJ3NdHps=
# =F6qI
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Feb 2023 04:04:10 GMT
# gpg:                using RSA key FAD4E2BF871375D6340517C44E661DDE583A964E
# gpg: Good signature from "Alexander Bulekov <alxndr@bu.edu>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAD4 E2BF 8713 75D6 3405  17C4 4E66 1DDE 583A 964E

* tag 'pr-2023-02-16' of https://gitlab.com/a1xndr/qemu:
  docs/fuzz: remove mentions of fork-based fuzzing
  fuzz: remove fork-fuzzing scaffolding
  fuzz/i440fx: remove fork-based fuzzer
  fuzz/virtio-blk: remove fork-based fuzzer
  fuzz/virtio-net: remove fork-based fuzzer
  fuzz/virtio-scsi: remove fork-based fuzzer
  fuzz/generic-fuzz: add a limit on DMA bytes written
  fuzz/generic-fuzz: use reboots instead of forks to reset state
  fuzz: add fuzz_reset API
  hw/sparse-mem: clear memory on reset

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'vfio-updates-20230216.0' of https://gitlab.com/alex.williamson/qemu into staging

VFIO updates 2023-02-16

 * Initial v2 migration support for vfio (Avihai Horon)

 * Add Cédric as vfio reviewer (Cédric Le Goater)

# -----BEGIN PGP SIGNATURE-----
#
# iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmPumhUbHGFsZXgud2ls
# bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsijnMP/0Rz/lsGxym76mXtr5WY
# OR5SDFpifpaUVi+1xTugYFPnZvN+RdnlcLrcp1g8G+lmd4ANqwT0b9XTTTI8WTau
# DhSHW/05WgAOrf/jOSV29oNSf7jtGJZcDbAy8f5NXxwK/IRlJEDJfCaqxwYSyYf1
# nfC0ZwMTrBrA6pzF5OzIJSkhl/uPwlTsBxRnbN86Z22rE128ASjUtj1jir4rPLg0
# ClUn7Rrdk/Y6uXIB9c6TFC+wmG0QAVsklWIeNLUFWUak4H0gqp7AUmMlJV99i5Q7
# 3H4Zjspwn79llvGm4X1QpuLaop2QaIQaW4FTpzRSftelEosjIjkTCMrWTb4MKff1
# cgT0dmC1Hht+zQ0MPbmgeaiwPH/V7r+J9GffG6p2b4itdHmrKVsqKQMSQS/IJFBw
# eiO1rENRXNcTnC29jPUhe1IS1DEwCNkWm9NgJoC5WPJYQXsiEvo4YDH/30FnByXg
# KQdd5OxR7o6qJM5e4PUn4wd9sHsYU8IsIEJdKnynoS9qUdPqv0tJ+tLYWcBhQPJq
# M8R+mDwImMzw0bgurg4607VgL9HJEXna2rgdd5hcMq88M+M5OpmowXlk4TTY4Ha9
# lmWSndYJG6npNY4NXcxbe4x5H8ndvHcO+g3weynsxPFjnL959NzQyWNFXFDBqBg3
# fhNVqYTrMOcEN5uv18o+mnsG
# =oK7/
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Feb 2023 21:03:17 GMT
# gpg:                using RSA key 42F6C04E540BD1A99E7B8A90239B9B6E3BB08B22
# gpg:                issuer "alex.williamson@redhat.com"
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex@shazbot.org>" [full]
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>" [full]
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B  8A90 239B 9B6E 3BB0 8B22

* tag 'vfio-updates-20230216.0' of https://gitlab.com/alex.williamson/qemu:
  MAINTAINERS: Add myself as VFIO reviewer
  docs/devel: Align VFIO migration docs to v2 protocol
  vfio: Alphabetize migration section of VFIO trace-events file
  vfio/migration: Remove VFIO migration protocol v1
  vfio/migration: Implement VFIO migration protocol v2
  vfio/migration: Rename functions/structs related to v1 protocol
  vfio/migration: Move migration v1 logic to vfio_migration_init()
  vfio/migration: Block multiple devices migration
  vfio/common: Change vfio_devices_all_running_and_saving() logic to equivalent one
  vfio/migration: Allow migration without VFIO IOMMU dirty tracking support
  vfio/migration: Fix NULL pointer dereference bug
  linux-headers: Update to v6.2-rc8

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-virtiofs-20230216b' of https://gitlab.com/dagrh/qemu into staging

Remove C virtiofsd

We deprecated the C virtiofsd in commit 34deee7b6a1418f3d62a
in v7.0 in favour of the Rust implementation at

  https://gitlab.com/virtio-fs/virtiofsd

since then, the Rust version has had more development and
has held up well.  It's time to say goodbye to the C version
that got us going.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmPudNkACgkQBRYzHrxb
# /ed2ZBAAlz+bjTIoWjJr5/5nSjydd5ucARYDX4n0PI2byVDHFVaUCTIi+rLrxCYs
# qnb7HVmQW4y6zy15sM1xsbqSyrVgqvDheAJPWVekkoIuVT1t6wVpAZ7sykwx8U1I
# ge2T6pXcc4xKptyGnMAB0v0T5r9hN2Peghg3/KBn6WSD1WM2rD6KmvU4untYOeST
# I/KeoEDc4WUHtaPoDIduQlEcxGKJft6ifS0ksL0Jlf06aDg9UXxcuovtN6GtmnD2
# oNPYR0qG6aN4FynTrcVBN38N3cEosdCtEK0kgvbxulnQ4Iwxyi9hBkvUJA3UmjQ/
# THkWa9Gl+bFTGfNFxUEBV+0bBI46MFn2zXmpatPeV6NvKhiaDi4DDUczueUH1+s+
# C5KWYN3LuDznmM2NQzFipG1NtP2tif6wM2dYTOHf62n4UZBSe0xSdM1OKwqKXQnN
# w5TPlZEvnaYY7vz2fjDlnLKAD9WxlxvMYjr/eJrrjDPSWGxAoe59q0nXBlzXi1Bl
# 6GcCqt/GQpLbY9X2l2pb1bvFOZcPtPZ6CiLBCslKZ5MxmiCvZWnJQ2ZHe9ccQeUX
# 22wWB5gkvWz/1bPddQR7JJ48HxBEPRd4aZ93A3jJfZqWCaTaHQ6bZboghVywMbXJ
# P0wkwaXsFshcyuZfus/dq61y+jsIVR3EyxxRMxd2rO6Mg6nvTcs=
# =0FYt
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Feb 2023 18:24:25 GMT
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* tag 'pull-virtiofs-20230216b' of https://gitlab.com/dagrh/qemu:
  virtiofsd: Swing deprecated message to removed-features
  virtiofsd: Remove source
  virtiofsd: Remove build and docs glue
  virtiofsd: Remove test

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs: build-platforms: refine requirements on Python build dependencies

Historically, the critical dependency for both building and running
QEMU has been the distro packages.  Because QEMU is written in C and C's
package management has been tied to distros (at least if you do not want
to bundle libraries with the binary, otherwise I suppose you could use
something like conda or wrapdb), C dependencies of QEMU would target the
version that is shipped in relatively old but still commonly used distros.

For non-C libraries, however, the situation is different, as these
languages have their own package management tool (cpan, pip, gem, npm,
and so on).  For some of these languages, the amount of dependencies
for even a simple program can easily balloon to the point that many
distros have given up on packaging non-C code.  For this reason, it has
become increasingly normal for developers to download dependencies into
a self-contained local environment, instead of relying on distro packages.

Fortunately, this affects QEMU only at build time, as qemu.git does
not package non-C artifacts such as the qemu.qmp package; but still,
as we make more use of Python, we experience a clash between a support
policy that is written for the C world, and dependencies (both direct
and indirect) that increasingly do not care for the distro versions
and are quick at moving past Python runtime versions that are declared
end-of-life.

For example, Python 3.6 has been EOL'd since December 2021 and Meson 0.62
(released the following March) already dropped support for it.  Yet,
Python 3.6 is the default version of the Python runtime for RHEL/CentOS
8 and SLE 15, respectively the penultimate and the most recent version
of two distros that QEMU would like to support.  (It is also the version
used by Ubuntu 18.04, but QEMU stopped supporting it in April 2022).

There are good reasons to move forward with the deprecation of Python
3.6 in QEMU as well: completing the configure->meson switch (which
requires Meson 0.63), and making the QAPI generator fully typed (which
requires newer versions of not just mypy but also Python, due to PEP563).

Fortunately, these long-term support distros do include newer versions of
the Python runtime.  However, these more recent runtimes only come with
a very small subset of the Python packages that the distro includes.
Because most dependencies are optional tests (avocado, mypy, flake8)
and Meson is bundled with QEMU, the most noticeably missing package is
Sphinx (and the readthedocs theme).  There are four possibilities:

* we change the support policy and stop supporting CentOS 8 and SLE 15;
  not a good idea since CentOS 8 is not an unreasonable distro for us to
  want to continue to support

* we keep supporting Python 3.6 until CentOS 8 and SLE 15 stop being
  supported.  This is a possibility---but we may want to revise the support
  policy anyway because SLE 16 has not even been released, so this would
  mean delaying those desirable reasons for perhaps three years;

* we support Python 3.6 just for building documentation, i.e. we are
  careful not to use Python 3.7+ features in our Sphinx extensions but are
  free to use them elsewhere.  Besides being more complicated to understand
  for developers, this can be quite limiting; parts of the QAPI generator
  run at sphinx-build time, which would exclude one of the areas which
  would benefit from a newer version of the runtime;

* we only support Python 3.7+, which means CentOS 8 CI and users
  have to either install Sphinx from pip or disable documentation.

This proposed update to the support policy chooses the last of these
possibilities.  It does by modifying three aspects of the support
policy:

* it introduces different support periods for *native* vs. *non-native*
  dependencies.  Non-native dependencies are currently Python ones only,
  and for simplicity the policy only mentions Python; however, the concept
  generalizes to other languages with a well-known upstream package
  manager, that users of older distributions can fetch dependencies from;

* it opens up the possibility of taking non-native dependencies from their
  own package index instead of using the version in the distribution.  The
  wording right now is specific to dependencies that are only required at
  build time.  In the future we may have to refine it if, for example, parts
  of QEMU will be written in Rust; in that case, crates would be handled
  in a similar way to submodules and vendored in the release tarballs.

* it mentions specifically that optional build dependencies are excluded
  from the platform policy.  Tools such as mypy don't affect the ability
  to build QEMU and move fast enough that distros cannot standardize on
  a single version of them (for example RHEL9 does not package them at
  all, nor does it run them at rpmbuild time).  In other cases, such as
  cross compilers, we have alternatives.

Right now, non-native dependencies have to be download manually by
running "pip" before "configure".  In the future, it will be desirable
for configure to set up a virtual environment and download them in the
same way that it populates git submodules (but, in this case, without
vendoring them in the release tarballs).

Just like with submodules, this would make things easier for people
that can afford accessing the network in their build environment; the
option to populate the build environment manually would remain for
people whose build machines lack network access.  The change to the
support policy neither requires nor forbids this future change.

[Thanks to Daniel P. Berrangé, Peter Maydell and others for discussions
 that were copied or summarized in the above commit message]

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging

Block layer patches

- configure: Enable -Wthread-safety if present
- no_co_wrapper to fix bdrv_open*() calls from coroutine context
- curl fixes, including enablement of newer libcurl versions
- MAINTAINERS: drop Vladimir from parallels block driver
- hbitmap: fix hbitmap_status() return value for first dirty bit case
- file-posix: Fix assertion failure in write_zeroes after moving
  bdrv_getlength() to co_wrapper

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmPvgm0RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZxQg//ZWwwh/s/P1PnKAjInNZZNklAWKThNEbZ
# cF1S94w26IhEQqM0i6MflqcDsPU5t4xZtBUOizx++9M4G8amWnomJSdczUcKULla
# Az9yweFC1Gu6ENdw+ql5VOzCfpdH5Bn9Jkly5fxuI4vmnBz1PH1Dnd3P4wuLq2sL
# xna5dijVEhRc5mTKWjbp4nFfvQhucuEBPSNjgnZwEPbhciWxTMmB1GmyRvTxZy8v
# UY8PcoTlxdKeVQ6DTmkOirphpGj7HeNCEQnZppWs7vHys2oGi9kmR5qTKUNZxGrY
# 8yWiCiVDqbb50fhEC1srhph79bCij87QC1N33Bm+NuGjnjG4bKVx2B9DC8+6S/JS
# e3x6u+r0dd6/t0rjKnt1+inYqmM+i5lBJ7+R0yhWUQ+DYkvttNf5yiotD8qvccWJ
# Kcx14lfjPLK7siAMEY5K0bNMimhN4RR9oCLoPTOHei+vlxdfiMm2XPN61NNht5gD
# lYZ8JMBsEF/o2ebqTgsJrIHS+Q/8MqcwSunBc54fcXZoF+eiza3W2ArXLNfAEfGE
# U4JowNK2PrTIrpEjD+Vs0RsBBSmN5PcYIAz04ioODpDnYMq73/t3x9MKdVoxOT64
# AM7w58fSyWu8iwvkeA0d3XeVtSHFqZ49PqqIem4IegtnC/AXMUNrJ/VT99xHjeJY
# oLhOJz7LUg0=
# =FtaA
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Feb 2023 13:34:37 GMT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (22 commits)
  hbitmap: fix hbitmap_status() return value for first dirty bit case
  block/file-posix: don't use functions calling AIO_WAIT_WHILE in worker threads
  MAINTAINERS: drop Vladimir from parallels block driver
  block: temporarily hold the new AioContext of bs_top in bdrv_append()
  block: Handle curl 7.55.0, 7.85.0 version changes
  block: Assert non-coroutine context for bdrv_open_inherit()
  block: Fix bdrv_co_create_opts_simple() to open images with no_co_wrapper
  vpc: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
  vmdk: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
  vhdx: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
  vdi: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
  qed: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
  qcow2: Fix open/create to open images with no_co_wrapper
  qcow: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
  parallels: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
  luks: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
  block: Create no_co_wrappers for open functions
  block-coroutine-wrapper: Introduce no_co_wrapper
  curl: Fix error path in curl_open()
  configure: Enable -Wthread-safety if present
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hbitmap: fix hbitmap_status() return value for first dirty bit case

The last return statement should return true, as we already evaluated that
start == next_dirty

Also, fix hbitmap_status() description in header

Cc: qemu-stable@nongnu.org
Fixes: a6426475a75 ("block/dirty-bitmap: introduce bdrv_dirty_bitmap_status()")
Signed-off-by: Andrey Zhadchenko <andrey.zhadchenko@virtuozzo.com>
Message-Id: <20230202181523.423131-1-andrey.zhadchenko@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block/file-posix: don't use functions calling AIO_WAIT_WHILE in worker threads

When calling bdrv_getlength() in handle_aiocb_write_zeroes(), the
function creates a new coroutine and then waits that it finishes using
AIO_WAIT_WHILE.
The problem is that this function could also run in a worker thread,
that has a different AioContext from main loop and iothreads, therefore
in AIO_WAIT_WHILE we will have in_aio_context_home_thread(ctx) == false
and therefore
assert(qemu_get_current_aio_context() == qemu_get_aio_context());
in the else branch will fail, crashing QEMU.

Aside from that, bdrv_getlength() is wrong also conceptually, because
it reads the BDS graph from another thread and is not protected by
any lock.

Replace it with raw_co_getlength, that doesn't create a coroutine and
doesn't read the BDS graph.

Reported-by: Ninad Palsule <ninad@linux.vnet.ibm.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230209154522.1164401-1-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

MAINTAINERS: drop Vladimir from parallels block driver

I have to admit this is out of my scope now. Still feel free to Cc me
directly if my help is needed :)

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230214182848.1564714-1-vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: temporarily hold the new AioContext of bs_top in bdrv_append()

bdrv_append() is called with bs_top AioContext held, but
bdrv_attach_child_noperm() could change the AioContext of bs_top.

bdrv_replace_node_noperm() calls bdrv_drained_begin() starting from
commit 2398747128 ("block: Don't poll in bdrv_replace_child_noperm()").
bdrv_drained_begin() can call BDRV_POLL_WHILE that assumes the new lock
is taken, so let's temporarily hold the new AioContext to prevent QEMU
from failing in BDRV_POLL_WHILE when it tries to release the wrong
AioContext.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2168209
Reported-by: Aihua Liang <aliang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230214171621.11574-1-sgarzare@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Handle curl 7.55.0, 7.85.0 version changes

* 7.55.0 deprecates CURLINFO_CONTENT_LENGTH_DOWNLOAD in favour of a *_T
  version, which returns curl_off_t instead of a double.
* 7.85.0 deprecates CURLOPT_PROTOCOLS and CURLOPT_REDIR_PROTOCOLS in
  favour of *_STR variants, specifying the desired protocols via a
  string.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1440
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230123201431.23118-1-anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Assert non-coroutine context for bdrv_open_inherit()

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-14-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>