OSDN Git Service
Myron Stowe [Mon, 21 Nov 2011 18:54:07 +0000 (11:54 -0700)]
PCI: Fix starting basis for resource requests
pci_revert_fw_address() is used to reinstate a PCI device's original
FW-assigned BIOS BAR value(s) if normal resource assignment fails.
When attempting to reinstate an address, the point within the resource
tree from which to attempt the new resource request should be the parent
resource corresponding to the device, not the base of the resource tree
(ioport_resource or iomem_resource). For PCI devices this would
typically be the resource corresponding to the upstream PCI host bridge
or P2P bridge aperture.
This patch sets the point within the resource tree to attempt a new
resource assignment request to the PCI device's parent resource and only
if that fails does it fall back to the base ioport_resource or
iomem_resource.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Yinghai Lu [Sun, 5 Feb 2012 06:55:00 +0000 (22:55 -0800)]
PCI: Fix pci cardbus removal
During test busn_res allocation with cardbus, found pci card removal is not
working anymore, and it turns out it is broken by:
|commit
79cc9601c3e42b4f0650fe7e69132ebce7ab48f9
|Date: Tue Nov 22 21:06:53 2011 -0800
|
| PCI: Only call pci_stop_bus_device() one time for child devices at remove
The above changed the behavior of pci_remove_behind_bridge that
yenta_cardbus depended on. So restore the old behavoir of
pci_remove_behind_bridge (which requires stopping and removing of all
devices) by:
1. rename pci_remove_behind_bridge to __pci_remove_behind_bridge, and let
__pci_remove_bus_device() call it instead.
2. add pci_stop_behind_bridge that will stop devices behind a bridge
3. add back pci_remove_behind_bridge that will stop and remove devices
under bridge.
-v2: update commit description a little bit.
Tested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Vaidyanathan Srinivasan [Thu, 2 Feb 2012 17:41:20 +0000 (23:11 +0530)]
PCI: set pci sriov page size before reading SRIOV BAR
For an SRIOV device, PCI_SRIOV_SYS_PGSIZE should be set before
the PCI_SRIOV_BAR are queried. The sys pagesize defaults to 4k,
so this change is required on powerpc box with 64k base page size.
This is a regression caused due to moving SRIOV init to sriov_enable().
| commit
afd24ece5c76af87f6fc477f2747b83a764f161c
| Author: Ram Pai <linuxram@us.ibm.com>
| PCI: delay configuration of SRIOV capability
| The SRIOV capability, namely page size and total_vfs of a device are
| configured during enumeration phase of the device. This can potentially
| interfere with the PCI operations of the platform, if the IOV capability
| of the device is not enabled.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Yinghai Lu [Mon, 30 Jan 2012 11:25:24 +0000 (12:25 +0100)]
PCI: workaround hard-wired bus number V2
Fixes PCI device detection on IBM xSeries IBM 3850 M2 / x3950 M2
when using ACPI resources (_CRS).
This is default, a manual workaround (without this patch)
would be pci=nocrs boot param.
V2: Add dev_warn if the workaround is hit. This should reveal
how common such setups are (via google) and point to possible
problems if things are still not working as expected.
-> Suggested by Jan Beulich.
Cc: stable@vger.kernel.org
Tested-by: garyhade@us.ibm.com
Signed-off-by: Yinghai Lu <yinghai.lu@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Linus Torvalds [Fri, 27 Jan 2012 15:56:25 +0000 (07:56 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits)
gma500: Fix suspend/resume functions
drm/exynos: fixed pm feature for fimd module.
MAINTAINERS: added maintainer entry for Exynos DRM Driver.
drm/exynos: fixed build dependency for DRM_EXYNOS_FIMD
drm/exynos: fix build dependency for DRM_EXYNOS_HDMI
drm/exynos: use release_mem_region instead of release_resource
agp: fix scratch page cleanup
drm/i915: fixup forcewake spinlock fallout in drpc debugfs function
drm/i915: debugfs: show semaphore registers also on gen7
drm/i915: allow userspace forcewake references also on gen7
drm/i915: Re-enable gen7 RC6 and GPU turbo after resume.
drm/i915: Correct debugfs printout for RC1e.
Revert "drm/i915: Work around gen7 BLT ring synchronization issues."
drm/i915: rip out the HWSTAM missed irq workaround
drm/i915: paper over missed irq issues with force wake voodoo
drm/i915: Hold gt_lock across forcewake register reads
drm/i915: Hold gt_lock during reset
drm/i915: Move reset forcewake processing to gen6_do_reset
drm/i915: protect force_wake_(get|put) with the gt_lock
drm/i915: convert force_wake_get to func pointer in the gpu reset code
...
Linus Torvalds [Fri, 27 Jan 2012 15:53:06 +0000 (07:53 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix silent output on Haier W18 laptop
ALSA: hda: set mute led polarity for laptops with buggy BIOS based on SSID
ALSA: hda - Fix silent output on ASUS A6Rp
ALSA: Fix memory leak on error in snd_compr_set_params()
ALSA: ymfpci - Don't create invalid PCM & mixers when AC97 doesn't support
Ryan Mallon [Fri, 27 Jan 2012 06:28:24 +0000 (17:28 +1100)]
gma500: Fix suspend/resume functions
Both the suspend and resume functions incorrectly set psbfb =
to_psb_fb(NULL) outside of the loop over all of the framebuffers. Fix
this by moving the assignment of psbfb inside the loop and removing the
initialisation of fb.
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 27 Jan 2012 07:16:27 +0000 (07:16 +0000)]
Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes
* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
drm/exynos: fixed pm feature for fimd module.
MAINTAINERS: added maintainer entry for Exynos DRM Driver.
drm/exynos: fixed build dependency for DRM_EXYNOS_FIMD
drm/exynos: fix build dependency for DRM_EXYNOS_HDMI
drm/exynos: use release_mem_region instead of release_resource
Inki Dae [Fri, 27 Jan 2012 02:54:58 +0000 (11:54 +0900)]
drm/exynos: fixed pm feature for fimd module.
this patch separates fimd specific power on/off function from pm function
and the pm interfaces will call that function for power on or off.
and also removes unnecessary codes of resume function.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Inki Dae [Tue, 17 Jan 2012 05:08:55 +0000 (14:08 +0900)]
MAINTAINERS: added maintainer entry for Exynos DRM Driver.
I'd like to add my colleagues who dedicated to developing and
improving our driver to maintainer entry.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Inki Dae [Mon, 16 Jan 2012 09:55:02 +0000 (18:55 +0900)]
drm/exynos: fixed build dependency for DRM_EXYNOS_FIMD
FB based FIMD and DRM based FIMD drivers use same hardware
so with this patch, only one of them would be selected.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Seung-Woo Kim [Wed, 4 Jan 2012 06:34:32 +0000 (15:34 +0900)]
drm/exynos: fix build dependency for DRM_EXYNOS_HDMI
DRM_EXYNOS_HDMI driver and VIDEO_SAMSUNG_S5P_TV driver should be
not enabled at once because they use same HW blocks. So dependency
for DRM_EXYNOS_HDMI is fixed to check VIDEO_SAMSUNG_S5P_TV=n.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Seung-Woo Kim [Thu, 22 Dec 2011 02:30:09 +0000 (11:30 +0900)]
drm/exynos: use release_mem_region instead of release_resource
To make a api pair of request_mem_region and release_mem_region,
release_mem_region is used instead of release_resource.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Linus Torvalds [Fri, 27 Jan 2012 01:04:47 +0000 (17:04 -0800)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] cinergyT2-fe: Fix bandwdith settings
[media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions
[media] cxd2820r: sleep on DVB-T/T2 delivery system switch
[media] anysee: fix CI init
[media] cxd2820r: remove unused parameter from cxd2820r_attach
[media] cxd2820r: fix dvb_frontend_ops
Linus Torvalds [Fri, 27 Jan 2012 01:00:38 +0000 (17:00 -0800)]
Merge git://git./linux/kernel/git/davem/sparc
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc32: forced setting of mode of sun4m per-cpu timers
Linus Torvalds [Thu, 26 Jan 2012 20:46:07 +0000 (12:46 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode_amd: Add support for CPU family specific container files
x86/amd: Add missing feature flag for fam15h models 10h-1fh processors
x86/boot-image: Don't leak phdrs in arch/x86/boot/compressed/misc.c::Parse_elf()
x86/numachip: Drop unnecessary conflict with EDAC
x86/uv: Fix uninitialized spinlocks
x86/uv: Fix uv_gpa_to_soc_phys_ram() shift
Linus Torvalds [Thu, 26 Jan 2012 20:45:57 +0000 (12:45 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Call perf_cgroup_event_time() directly
perf: Don't call release_callchain_buffers() if allocation fails
Linus Torvalds [Thu, 26 Jan 2012 20:45:41 +0000 (12:45 -0800)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Add missing __cpuinit annotation in rcutorture code
sched: Add "const" to is_idle_task() parameter
rcu: Make rcutorture bool parameters really bool (core code)
memblock: Fix alloc failure due to dumb underflow protection in memblock_find_in_range_node()
Linus Torvalds [Thu, 26 Jan 2012 20:43:57 +0000 (12:43 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Fix assembler constraint to prevent overeager gcc optimisation
mac_esp: rename irq
mac_scsi: dont enable mac_scsi irq before requesting it
macfb: fix black and white modes
m68k/irq: Remove obsolete IRQ_FLG_* definitions
Fix up trivial conflict in arch/m68k/kernel/process_mm.c as per Geert.
Michal Kubecek [Wed, 25 Jan 2012 15:51:05 +0000 (16:51 +0100)]
agp: fix scratch page cleanup
In error cleanup of agp_backend_initialize() and in agp_backend_cleanup(),
agp_destroy_page() is passed virtual address of the scratch page. This
leads to a kernel warning if the initialization fails (or upon regular
cleanup) as pointer to struct page should be passed instead.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 26 Jan 2012 18:25:54 +0000 (18:25 +0000)]
Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux into drm-fixes
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: (24 commits)
drm/i915: fixup forcewake spinlock fallout in drpc debugfs function
drm/i915: debugfs: show semaphore registers also on gen7
drm/i915: allow userspace forcewake references also on gen7
drm/i915: Re-enable gen7 RC6 and GPU turbo after resume.
drm/i915: Correct debugfs printout for RC1e.
Revert "drm/i915: Work around gen7 BLT ring synchronization issues."
drm/i915: rip out the HWSTAM missed irq workaround
drm/i915: paper over missed irq issues with force wake voodoo
drm/i915: Hold gt_lock across forcewake register reads
drm/i915: Hold gt_lock during reset
drm/i915: Move reset forcewake processing to gen6_do_reset
drm/i915: protect force_wake_(get|put) with the gt_lock
drm/i915: convert force_wake_get to func pointer in the gpu reset code
drm/i915: sprite init failure on pre-SNB is not a failure
drm/i915: VBT Parser cleanup for eDP block
drm/i915: mask transcoder select bits before setting them on LVDS
drm/i915: Add Clientron E830 to the ignore LVDS list
CHROMIUM: i915: Add DMI override to skip CRT initialization on ZGB
drm/i915: handle 3rd pipe
drm/i915: simplify pipe checking
...
Takashi Iwai [Thu, 26 Jan 2012 14:56:16 +0000 (15:56 +0100)]
ALSA: hda - Fix silent output on Haier W18 laptop
The very same problem is seen on Haier W18 laptop with ALC861 as seen
on ASUS A6Rp, which was fixed by the commit
3b25eb69.
Now we just need to add a new SSID entry pointing to the same fixup.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42656
Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Andreas Herrmann [Fri, 20 Jan 2012 16:44:12 +0000 (17:44 +0100)]
x86/microcode_amd: Add support for CPU family specific container files
We've decided to provide CPU family specific container files
(starting with CPU family 15h). E.g. for family 15h we have to
load microcode_amd_fam15h.bin instead of microcode_amd.bin
Rationale is that starting with family 15h patch size is larger
than 2KB which was hard coded as maximum patch size in various
microcode loaders (not just Linux).
Container files which include patches larger than 2KB cause
different kinds of trouble with such old patch loaders. Thus we
have to ensure that the default container file provides only
patches with size less than 2KB.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20120120164412.GD24508@alberich.amd.com
[ documented the naming convention and tidied the code a bit. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Andreas Herrmann [Fri, 20 Jan 2012 16:38:23 +0000 (17:38 +0100)]
x86/amd: Add missing feature flag for fam15h models 10h-1fh processors
That is the last one missing for those CPUs.
Others were recently added with commits
fb215366b3c7320ac25dca766a0152df16534932
(KVM: expose latest Intel cpu new features (BMI1/BMI2/FMA/AVX2) to guest)
and
commit
969df4b82904a30fef19a67398a0c854d223ea67
(x86: Report cpb and eff_freq_ro flags correctly)
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Link: http://lkml.kernel.org/r/20120120163823.GC24508@alberich.amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jesper Juhl [Mon, 23 Jan 2012 22:34:59 +0000 (23:34 +0100)]
x86/boot-image: Don't leak phdrs in arch/x86/boot/compressed/misc.c::Parse_elf()
We allocate memory with malloc(), but neglect to free it before
the variable 'phdrs' goes out of scope --> leak.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1201232332590.8772@swampdragon.chaosbits.net
[ Mostly harmless. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Daniel J Blueman [Wed, 25 Jan 2012 06:35:49 +0000 (14:35 +0800)]
x86/numachip: Drop unnecessary conflict with EDAC
EDAC detection no longer crashes multi-node systems, so don't
conflict on it with NumaChip.
Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
Cc: Steffen Persvold <sp@numascale.com>
Link: http://lkml.kernel.org/r/1327473349-28395-1-git-send-email-daniel@numascale-asia.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cliff Wickman [Wed, 18 Jan 2012 15:40:47 +0000 (09:40 -0600)]
x86/uv: Fix uninitialized spinlocks
Initialize two spinlocks in tlb_uv.c and also properly define/initialize
the uv_irq_lock.
The lack of explicit initialization seems to be functionally
harmless, but it is diagnosed when these are turned on:
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Link: http://lkml.kernel.org/r/E1RnXd1-0003wU-PM@eag09.americas.sgi.com
[ Added the uv_irq_lock initialization fix by Dimitri Sivanich ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Russ Anderson [Thu, 19 Jan 2012 02:07:54 +0000 (20:07 -0600)]
x86/uv: Fix uv_gpa_to_soc_phys_ram() shift
uv_gpa_to_soc_phys_ram() was inadvertently ignoring the
shift values. This fix takes the shift into account.
Signed-off-by: Russ Anderson <rja@sgi.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20120119020753.GA7228@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Thu, 26 Jan 2012 03:28:58 +0000 (19:28 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sha512 - reduce stack usage to safe number
crypto: sha512 - make it work, undo percpu message schedule
Linus Torvalds [Wed, 25 Jan 2012 23:36:44 +0000 (15:36 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Quoth Ben Myers:
"Please pull in the following bugfix for xfs. We forgot to drop a lock on
error in xfs_readlink. It hasn't been through -next yet, but there is no
-next tree tomorrow. The fix is clear so I'm sending this request today."
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: Fix missing xfs_iunlock() on error recovery path in xfs_readlink()
Linus Torvalds [Wed, 25 Jan 2012 23:24:30 +0000 (15:24 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/ttm: fix two regressions since move_notify changes
drm/radeon: avoid deadlock if GPU lockup is detected in ib_pool_get
drm/radeon: silence out possible lock dependency warning
drm: Fix authentication kernel crash
gma500: Fix shmem mapping
drm/radeon/kms: refine TMDS dual link checks
drm/radeon/kms: use drm_detect_hdmi_monitor for picking encoder mode
drm/radeon/kms: rework modeset sequence for DCE41 and DCE5
drm/radeon/kms: move panel mode setup into encoder mode set
drm/radeon/kms: move disp eng pll setup to init path
drm/radeon: finish getting bios earlier
drm/radeon: fix invalid memory access in radeon_atrm_get_bios()
drm/radeon/kms: add some missing semaphore init
drm/radeon/kms: Add an MSI quirk for Dell RS690
gpu, drm, sis: Don't return uninitialized variable from sis_driver_load()
Linus Torvalds [Wed, 25 Jan 2012 23:13:04 +0000 (15:13 -0800)]
Merge branch 'fix/asoc' of git://git./linux/kernel/git/tiwai/sound
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on error
ASoC: wm8958: Use correct format string in dev_err() call
ASoC: wm8996: Call _POST_PMU callback for CPVDD
ASoC: mxs: Fix mxs-saif timeout
ASoC: Disable register synchronisation for low frequency WM8996 SYSCLK
ASoC: Don't go through cache when applying WM5100 rev A updates
ASoC: Mark WM5100 register map cache only when going into BIAS_OFF
ASoC: tlv320aic32x4: always enable analouge block
ASoC: tlv320aic32x4: always enable dividers
ASoC: sgtl5000: Fix wrong register name in restore
Linus Torvalds [Wed, 25 Jan 2012 23:11:57 +0000 (15:11 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/broonie/regmap
A fairly simple bugfix for a WARN_ON() which was triggered in the cache
reset support as a result of some subsequent work. There's only one
mainline user for the code path that's updated right now (wm8994) so
should be low risk.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Reset cache status when reinitialsing the cache
Li Wang [Wed, 25 Jan 2012 07:40:31 +0000 (15:40 +0800)]
eCryptfs: move misleading function comments
The data encryption was moved from ecryptfs_write_end into
ecryptfs_writepage, this patch moves the corresponding function
comments to be consistent with the modification.
Signed-off-by: Li Wang <liwang@nudt.edu.cn>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 25 Jan 2012 23:03:04 +0000 (15:03 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tyhicks/ecryptfs
Says Tyler:
"Tim's logging message update will be really helpful to users when
they're trying to locate a problematic file in the lower filesystem
with filename encryption enabled.
You'll recognize the fix from Li, as you commented on that.
You should also be familiar with my setattr/truncate improvements,
since you were the one that pointed them out to us (thanks again!).
Andrew noted the /dev/ecryptfs write count sanitization needed to be
improved, so I've got a fix in there for that along with some other
less important cleanups of the /dev/ecryptfs read/write code."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: Fix oops when printing debug info in extent crypto functions
eCryptfs: Remove unused ecryptfs_read()
eCryptfs: Check inode changes in setattr
eCryptfs: Make truncate path killable
eCryptfs: Infinite loop due to overflow in ecryptfs_write()
eCryptfs: Replace miscdev read/write magic numbers
eCryptfs: Report errors in writes to /dev/ecryptfs
eCryptfs: Sanitize write counts of /dev/ecryptfs
ecryptfs: Remove unnecessary variable initialization
ecryptfs: Improve metadata read failure logging
MAINTAINERS: Update eCryptfs maintainer address
Tyler Hicks [Tue, 24 Jan 2012 16:02:22 +0000 (10:02 -0600)]
eCryptfs: Fix oops when printing debug info in extent crypto functions
If pages passed to the eCryptfs extent-based crypto functions are not
mapped and the module parameter ecryptfs_verbosity=1 was specified at
loading time, a NULL pointer dereference will occur.
Note that this wouldn't happen on a production system, as you wouldn't
pass ecryptfs_verbosity=1 on a production system. It leaks private
information to the system logs and is for debugging only.
The debugging info printed in these messages is no longer very useful
and rather than doing a kmap() in these debugging paths, it will be
better to simply remove the debugging paths completely.
https://launchpad.net/bugs/913651
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Daniel DeFreez
Cc: <stable@vger.kernel.org>
Tyler Hicks [Wed, 18 Jan 2012 21:09:43 +0000 (15:09 -0600)]
eCryptfs: Remove unused ecryptfs_read()
ecryptfs_read() has been ifdef'ed out for years now and it was
apparently unused before then. It is time to get rid of it for good.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Tyler Hicks [Fri, 20 Jan 2012 02:33:44 +0000 (20:33 -0600)]
eCryptfs: Check inode changes in setattr
Most filesystems call inode_change_ok() very early in ->setattr(), but
eCryptfs didn't call it at all. It allowed the lower filesystem to make
the call in its ->setattr() function. Then, eCryptfs would copy the
appropriate inode attributes from the lower inode to the eCryptfs inode.
This patch changes that and actually calls inode_change_ok() on the
eCryptfs inode, fairly early in ecryptfs_setattr(). Ideally, the call
would happen earlier in ecryptfs_setattr(), but there are some possible
inode initialization steps that must happen first.
Since the call was already being made on the lower inode, the change in
functionality should be minimal, except for the case of a file extending
truncate call. In that case, inode_newsize_ok() was never being
called on the eCryptfs inode. Rather than inode_newsize_ok() catching
maximum file size errors early on, eCryptfs would encrypt zeroed pages
and write them to the lower filesystem until the lower filesystem's
write path caught the error in generic_write_checks(). This patch
introduces a new function, called ecryptfs_inode_newsize_ok(), which
checks if the new lower file size is within the appropriate limits when
the truncate operation will be growing the lower file.
In summary this change prevents eCryptfs truncate operations (and the
resulting page encryptions), which would exceed the lower filesystem
limits or FSIZE rlimits, from ever starting.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Li Wang <liwang@nudt.edu.cn>
Cc: <stable@vger.kernel.org>
Tyler Hicks [Thu, 19 Jan 2012 00:30:04 +0000 (18:30 -0600)]
eCryptfs: Make truncate path killable
ecryptfs_write() handles the truncation of eCryptfs inodes. It grabs a
page, zeroes out the appropriate portions, and then encrypts the page
before writing it to the lower filesystem. It was unkillable and due to
the lack of sparse file support could result in tying up a large portion
of system resources, while encrypting pages of zeros, with no way for
the truncate operation to be stopped from userspace.
This patch adds the ability for ecryptfs_write() to detect a pending
fatal signal and return as gracefully as possible. The intent is to
leave the lower file in a useable state, while still allowing a user to
break out of the encryption loop. If a pending fatal signal is detected,
the eCryptfs inode size is updated to reflect the modified inode size
and then -EINTR is returned.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: <stable@vger.kernel.org>
Li Wang [Thu, 19 Jan 2012 01:44:36 +0000 (09:44 +0800)]
eCryptfs: Infinite loop due to overflow in ecryptfs_write()
ecryptfs_write() can enter an infinite loop when truncating a file to a
size larger than 4G. This only happens on architectures where size_t is
represented by 32 bits.
This was caused by a size_t overflow due to it incorrectly being used to
store the result of a calculation which uses potentially large values of
type loff_t.
[tyhicks@canonical.com: rewrite subject and commit message]
Signed-off-by: Li Wang <liwang@nudt.edu.cn>
Signed-off-by: Yunchuan Wen <wenyunchuan@kylinos.com.cn>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Tyler Hicks [Sat, 14 Jan 2012 15:46:46 +0000 (16:46 +0100)]
eCryptfs: Replace miscdev read/write magic numbers
ecryptfs_miscdev_read() and ecryptfs_miscdev_write() contained many
magic numbers for specifying packet header field sizes and offsets. This
patch defines those values and replaces the magic values.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Tyler Hicks [Sat, 14 Jan 2012 14:51:37 +0000 (15:51 +0100)]
eCryptfs: Report errors in writes to /dev/ecryptfs
Errors in writes to /dev/ecryptfs were being incorrectly reported by
returning 0 or the value of the original write count.
This patch clears up the return code assignment in error paths.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Tyler Hicks [Thu, 12 Jan 2012 10:30:44 +0000 (11:30 +0100)]
eCryptfs: Sanitize write counts of /dev/ecryptfs
A malicious count value specified when writing to /dev/ecryptfs may
result in a a very large kernel memory allocation.
This patch peeks at the specified packet payload size, adds that to the
size of the packet headers and compares the result with the write count
value. The resulting maximum memory allocation size is approximately 532
bytes.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Cc: <stable@vger.kernel.org>
Tim Gardner [Thu, 12 Jan 2012 15:31:55 +0000 (16:31 +0100)]
ecryptfs: Remove unnecessary variable initialization
Removes unneeded variable initialization in ecryptfs_read_metadata(). Also adds
a small comment to help explain metadata reading logic.
[tyhicks@canonical.com: Pulled out of for-stable patch and wrote commit msg]
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Tim Gardner [Thu, 12 Jan 2012 15:31:55 +0000 (16:31 +0100)]
ecryptfs: Improve metadata read failure logging
Print inode on metadata read failure. The only real
way of dealing with metadata read failures is to delete
the underlying file system file. Having the inode
allows one to 'find . -inum INODE`.
[tyhicks@canonical.com: Removed some minor not-for-stable parts]
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Dustin Kirkland [Wed, 7 Dec 2011 14:56:49 +0000 (08:56 -0600)]
MAINTAINERS: Update eCryptfs maintainer address
Update my email address in MAINTAINERS.
Signed-off-by: Dustin Kirkland <dustin.kirkland@gazzang.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Ben Skeggs [Wed, 25 Jan 2012 05:34:22 +0000 (15:34 +1000)]
drm/ttm: fix two regressions since move_notify changes
Both changes in
dc97b3409a790d2a21aac6e5cdb99558b5944119 cause serious
regressions in the nouveau driver.
move_notify() was originally able to presume that bo->mem is the old node,
and new_mem is the new node. The above commit moves the call to
move_notify() to after move() has been done, which means that now, sometimes,
new_mem isn't the new node at all, bo->mem is, and new_mem points at a
stale, possibly-just-been-killed-by-move node.
This is clearly not a good situation. This patch reverts this change, and
replaces it with a cleanup in the move() failure path instead.
The second issue is that the call to move_notify() from cleanup_memtype_use()
causes the TTM ghost objects to get passed into the driver. This is clearly
bad as the driver knows nothing about these "fake" TTM BOs, and ends up
accessing uninitialised memory.
I worked around this in nouveau's move_notify() hook by ensuring the BO
destructor was nouveau's. I don't particularly like this solution, and
would rather TTM never pass the driver these objects. However, I don't
clearly understand the reason why we're calling move_notify() here anyway
and am happy to work around the problem in nouveau instead of breaking the
behaviour expected by other drivers.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Wed, 25 Jan 2012 12:52:43 +0000 (13:52 +0100)]
drm/i915: fixup forcewake spinlock fallout in drpc debugfs function
My forcewake spinlock patches have a functional conflict with Ben
Widawsky's gen6 drpc support for debugfs. Result was a benign warning
about trying to read an non-atomic variabla with atomic_read.
Note that the entire check is racy anyway and purely informational.
Also update it to reflect the forcewake voodoo changes, the kernel can
now also hold onto a forcewake reference for longer times.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Jan Kara [Wed, 11 Jan 2012 18:52:10 +0000 (18:52 +0000)]
xfs: Fix missing xfs_iunlock() on error recovery path in xfs_readlink()
Commit
b52a360b forgot to call xfs_iunlock() when it detected corrupted
symplink and bailed out. Fix it by jumping to 'out' instead of doing return.
CC: stable@kernel.org
CC: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Alex Elder <elder@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Jerome Glisse [Mon, 23 Jan 2012 16:52:15 +0000 (11:52 -0500)]
drm/radeon: avoid deadlock if GPU lockup is detected in ib_pool_get
If GPU lockup is detected in ib_pool get we are holding the ib_pool
mutex that will be needed by the GPU reset code. As ib_pool code is
safe to be reentrant from GPU reset code we should not block if we
are trying to get the ib pool lock on the behalf of the same userspace
caller, thus use the radeon_mutex_lock helper.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Tue, 24 Jan 2012 17:08:52 +0000 (12:08 -0500)]
drm/radeon: silence out possible lock dependency warning
Silence out the lock dependency warning by moving bo allocation out
of ib mutex protected section. Might lead to useless temporary
allocation but it's not harmful as such things only happen at
initialization.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Thomas Hellstrom [Tue, 24 Jan 2012 17:54:21 +0000 (18:54 +0100)]
drm: Fix authentication kernel crash
If the master tries to authenticate a client using drm_authmagic and
that client has already closed its drm file descriptor,
either wilfully or because it was terminated, the
call to drm_authmagic will dereference a stale pointer into kmalloc'ed memory
and corrupt it.
Typically this results in a hard system hang.
This patch fixes that problem by removing any authentication tokens
(struct drm_magic_entry) open for a file descriptor when that file
descriptor is closed.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gustavo Maciel Dias Vieira [Tue, 24 Jan 2012 15:27:56 +0000 (13:27 -0200)]
ALSA: hda: set mute led polarity for laptops with buggy BIOS based on SSID
HP laptop models with buggy BIOS are apparently frequent, including
machines with different codecs. Set the polarity of the mute led based
on the SSID and include an entry for the HP Mini 110-3100.
Signed-off-by: Gustavo Maciel Dias Vieira <gustavo@sagui.org>
Tested-by: Predrag Ivanovic <predivan@open.telekom.rs>
Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 25 Jan 2012 08:55:46 +0000 (09:55 +0100)]
ALSA: hda - Fix silent output on ASUS A6Rp
The refactoring of Realtek codec driver in 3.2 kernel caused a
regression for ASUS A6Rp laptop; it doesn't give any output.
The reason was that this machine has a secret master mute (or EAPD)
control via NID 0x0f VREF. Setting VREF50 on this node makes the
sound working again.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588
Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Wed, 25 Jan 2012 06:05:44 +0000 (22:05 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux
Quoth Len:
"This fixes a merge-window regression due to a conflict
between error injection and preparation to remove atomicio.c
Here we fix that regression and complete the removal
of atomicio.c.
This also re-orders some idle initialization code to
complete the merge window series that allows cpuidle
to cope with bringing processors on-line after boot."
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
Use acpi_os_map_memory() instead of ioremap() in einj driver
ACPI, APEI, EINJ, cleanup 0 vs NULL confusion
ACPI, APEI, EINJ Allow empty Trigger Error Action Table
thermal: Rename generate_netlink_event
ACPI / PM: Add Sony Vaio VPCCW29FX to nonvs blacklist.
ACPI: Remove ./drivers/acpi/atomicio.[ch]
ACPI, APEI: Add RAM mapping support to ACPI
ACPI, APEI: Add 64-bit read/write support for APEI on i386
ACPI processor hotplug: Delay acpi_processor_start() call for hotplugged cores
ACPI processor hotplug: Split up acpi_processor_add
Linus Torvalds [Wed, 25 Jan 2012 05:17:51 +0000 (21:17 -0800)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix build on some non-freescale platforms
powerpc/powernv: Fix PCI resource handling
powerpc/crash: Fix build error without SMP
powerpc/cpuidle: Make it a bool, not a tristate
powerpc/85xx: Add dr_mode property in USB nodes
powerpc/85xx: Enable USB2 controller node for P1020RDB
powerpc/85xx: Fix cmd12 bug and add the chip compatible for eSDHC
arch/powerpc/sysdev/fsl_pci.c: add missing iounmap
powerpc: fix compile error with 85xx/p1022_ds.c
Benjamin Herrenschmidt [Wed, 25 Jan 2012 02:33:22 +0000 (13:33 +1100)]
powerpc: Fix build on some non-freescale platforms
Commit
9deaa53ac7fa373623123aa4f18828dd62292b1a broke build
on platforms that use legacy_serial.c without also having
CONFIG_SERIAL_8250_FSL enabled due to an unconditional code
to a routine in that module.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 25 Jan 2012 02:31:56 +0000 (13:31 +1100)]
powerpc/powernv: Fix PCI resource handling
Recent changes to the handling of PCI resources for host bridges
are breaking the PowerNV code for assigning resources on IODA.
The root of the problem is that the pci_bus attached to a host
bridge no longer has its "legacy" resource pointers populated
but only uses the newer list instead.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Linus Torvalds [Tue, 24 Jan 2012 23:51:40 +0000 (15:51 -0800)]
Merge git://git./linux/kernel/git/davem/net
Davem says:
1) Fix JIT code generation on x86-64 for divide by zero, from Eric Dumazet.
2) tg3 header length computation correction from Eric Dumazet.
3) More build and reference counting fixes for socket memory cgroup
code from Glauber Costa.
4) module.h snuck back into a core header after all the hard work we
did to remove that, from Paul Gortmaker and Jesper Dangaard Brouer.
5) Fix PHY naming regression and add some new PCI IDs in stmmac, from
Alessandro Rubini.
6) Netlink message generation fix in new team driver, should only advertise
the entries that changed during events, from Jiri Pirko.
7) SRIOV VF registration and unregistration fixes, and also add a
missing PCI ID, from Roopa Prabhu.
8) Fix infinite loop in tx queue flush code of brcmsmac, from Stanislaw Gruszka.
9) ftgmac100/ftmac100 build fix, missing interrupt.h include.
10) Memory leak fix in net/hyperv do_set_mutlicast() handling, from Wei Yongjun.
11) Off by one fix in netem packet scheduler, from Vijay Subramanian.
12) TCP loss detection fix from Yuchung Cheng.
13) TCP reset packet MD5 calculation uses wrong address, fix from Shawn Lu.
14) skge carrier assertion and DMA mapping fixes from Stephen Hemminger.
15) Congestion recovery undo performed at the wrong spot in BIC and CUBIC
congestion control modules, fix from Neal Cardwell.
16) Ethtool ETHTOOL_GSSET_INFO is unnecessarily restrictive, from Michał Mirosław.
17) Fix triggerable race in ipv6 sysctl handling, from Francesco Ruggeri.
18) Statistics bug fixes in mlx4 from Eugenia Emantayev.
19) rds locking bug fix during info dumps, from your's truly.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
rds: Make rds_sock_lock BH rather than IRQ safe.
netprio_cgroup.h: dont include module.h from other includes
net: flow_dissector.c missing include linux/export.h
team: send only changed options/ports via netlink
net/hyperv: fix possible memory leak in do_set_multicast()
drivers/net: dsa/mv88e6xxx.c files need linux/module.h
stmmac: added PCI identifiers
llc: Fix race condition in llc_ui_recvmsg
stmmac: fix phy naming inconsistency
dsa: Add reporting of silicon revision for Marvell
88E6123/
88E6161/
88E6165 switches.
tg3: fix ipv6 header length computation
skge: add byte queue limit support
mv643xx_eth: Add Rx Discard and Rx Overrun statistics
bnx2x: fix compilation error with SOE in fw_dump
bnx2x: handle CHIP_REVISION during init_one
bnx2x: allow user to change ring size in ISCSI SD mode
bnx2x: fix Big-Endianess in ethtool -t
bnx2x: fixed ethtool statistics for MF modes
bnx2x: credit-leakage fixup on vlan_mac_del_all
macvlan: fix a possible use after free
...
Christian Kujau [Tue, 17 Jan 2012 19:13:05 +0000 (19:13 +0000)]
powerpc/crash: Fix build error without SMP
I could not find cpus_in_crash anywhere in the sourcetree, except for
arch/powerpc/kernel/crash.c. Moving the definition into the CONFIG_SMP
fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Deepthi Dharwar [Thu, 12 Jan 2012 03:05:55 +0000 (03:05 +0000)]
powerpc/cpuidle: Make it a bool, not a tristate
As pointed out, asm/system.h has empty inline implementations for
update_smt_snooze_delay and pseries_notify_cpuidle_add_cpu, which are
used when CONFIG_PSERIES_IDLE is undefined. Since those two functions
are used in core power architecture functions (store_smt_snooze_delay
at kernel/sysfs.c and smp_xics_setup_cpu at platforms/pseries/smp.c),
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 24 Jan 2012 22:40:34 +0000 (09:40 +1100)]
Merge remote-tracking branch 'kumar/merge' into merge
David S. Miller [Tue, 24 Jan 2012 22:03:44 +0000 (17:03 -0500)]
rds: Make rds_sock_lock BH rather than IRQ safe.
rds_sock_info() triggers locking warnings because we try to perform a
local_bh_enable() (via sock_i_ino()) while hardware interrupts are
disabled (via taking rds_sock_lock).
There is no reason for rds_sock_lock to be a hardware IRQ disabling
lock, none of these access paths run in hardware interrupt context.
Therefore making it a BH disabling lock is safe and sufficient to
fix this bug.
Reported-by: Kumar Sanghvi <kumaras@chelsio.com>
Reported-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Gortmaker [Tue, 24 Jan 2012 11:33:19 +0000 (11:33 +0000)]
netprio_cgroup.h: dont include module.h from other includes
A considerable effort was invested in wiping out module.h
from being present in all the other standard includes. This
one leaked back in, but once again isn't strictly necessary,
so remove it.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Vetter [Tue, 24 Jan 2012 08:44:29 +0000 (09:44 +0100)]
drm/i915: debugfs: show semaphore registers also on gen7
Corresponding changes to improve our error_state are pending
some other patches to clean up things first.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Daniel Vetter [Tue, 24 Jan 2012 08:44:28 +0000 (09:44 +0100)]
drm/i915: allow userspace forcewake references also on gen7
We need this to correctly access registers in the gt power well from
userspace.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Eric Anholt [Tue, 24 Jan 2012 00:14:06 +0000 (16:14 -0800)]
drm/i915: Re-enable gen7 RC6 and GPU turbo after resume.
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: stable@vger.kernel.org
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Eric Anholt [Tue, 24 Jan 2012 00:14:05 +0000 (16:14 -0800)]
drm/i915: Correct debugfs printout for RC1e.
We had two things in a row claiming to be RC6.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Jesper Dangaard Brouer [Tue, 24 Jan 2012 21:03:33 +0000 (16:03 -0500)]
net: flow_dissector.c missing include linux/export.h
The file net/core/flow_dissector.c seems to be missing
including linux/export.h.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 24 Jan 2012 05:16:00 +0000 (05:16 +0000)]
team: send only changed options/ports via netlink
This patch changes event message behaviour to send only updated records
instead of whole list. This fixes bug on which userspace receives non-actual
data in case multiple events occur in row.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Tue, 24 Jan 2012 10:21:28 +0000 (10:21 +0000)]
net/hyperv: fix possible memory leak in do_set_multicast()
do_set_multicast() may not free the memory malloc in
netvsc_set_multicast_list().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Gortmaker [Tue, 24 Jan 2012 10:41:40 +0000 (10:41 +0000)]
drivers/net: dsa/mv88e6xxx.c files need linux/module.h
An implicit instance of module.h leaked back into existence
and was masking the fact that these drivers weren't calling
out the include for itself. Fix the drivers before we remove
the implicit include path via net/netprio_cgroup.h file.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alessandro Rubini [Mon, 23 Jan 2012 23:08:56 +0000 (23:08 +0000)]
stmmac: added PCI identifiers
STM has a device ID within its own VENDOR space, and it is being
used in the STA2X11 I/O Hub.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Radu Iliescu [Thu, 19 Jan 2012 03:57:57 +0000 (03:57 +0000)]
llc: Fix race condition in llc_ui_recvmsg
There is a race on sk_receive_queue between llc_ui_recvmsg and
sock_queue_rcv_skb.
Our current solution is to protect skb_eat in llc_ui_recvmsg
with the queue spinlock.
Signed-off-by: Radu Iliescu <riliescu@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alessandro Rubini [Mon, 23 Jan 2012 23:26:48 +0000 (23:26 +0000)]
stmmac: fix phy naming inconsistency
After commit "
db8857b stmmac: use an unique MDIO bus name" my
device stopped being probed because two different names were being
used in different places. This fixes the inconsistency.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Florian Fainelli <florian@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 24 Jan 2012 20:12:40 +0000 (12:12 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Pass information that quota is stored in system file to userspace
ext2: protect inode changes in the SETVERSION and SETFLAGS ioctls
jbd: Issue cache flush after checkpointing
Mark Brown [Tue, 24 Jan 2012 11:17:26 +0000 (11:17 +0000)]
regulator: Fix documentation for of_node parameter of regulator_register()
Commit
5bc75a886353 ("kernel-doc: fix new warning in regulator core")
added documentation for of_node to address a warning but the
documentation didn't explain what the parameter is for so would be
likely to be unhelpful for users. Clarify that.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 24 Jan 2012 18:25:29 +0000 (10:25 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix silent outputs from docking-station jacks of Dell laptops
ALSA: HDA: Use model=auto for Thinkpad T510
ALSA: hda - Fix buffer-alignment regression with Nvidia HDMI
ALSA: hda - Fix a unused variable warning
snd-hda-intel: better Alienware M17x R3 quirk
ALSA: hda/realtek - Remove use_jack_tbl field
ALSA: hda/realtek - Avoid conflict of unsol-events with static quirks
ALSA: hda/realtek - Avoid multi-ios conflicting with multi-speakers
Alan Cox [Tue, 24 Jan 2012 16:57:42 +0000 (16:57 +0000)]
gma500: Fix shmem mapping
GMA500 did it the old way and it's been on the TODO list to fix.
Current kernels now blow up if we use the old way so we'd better
do the work!
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Tue, 24 Jan 2012 16:57:42 +0000 (16:57 +0000)]
gma500: Fix shmem mapping
GMA500 did it the old way and it's been on the TODO list to fix. Current kernels
now blow up if we use the old way so we'd better do the work !
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 20 Jan 2012 20:03:30 +0000 (15:03 -0500)]
drm/radeon/kms: refine TMDS dual link checks
HDMI 1.3 defines single link clocks up to 340 Mhz.
Refine the current dual link checks to only enable
dual link for DVI > 165 Mhz or HDMI > 340 Mhz if the
hw supports HDMI 1.3 (DCE3+).
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=44755
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 20 Jan 2012 20:03:29 +0000 (15:03 -0500)]
drm/radeon/kms: use drm_detect_hdmi_monitor for picking encoder mode
We were previously just checking for audio.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 20 Jan 2012 20:01:30 +0000 (15:01 -0500)]
drm/radeon/kms: rework modeset sequence for DCE41 and DCE5
dig transmitter control table only has ENABLE/DISABLE actions
on DCE4.1/DCE5.
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=44955
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 20 Jan 2012 20:01:29 +0000 (15:01 -0500)]
drm/radeon/kms: move panel mode setup into encoder mode set
Needs to happen earlier in the mode set.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 20 Jan 2012 19:56:39 +0000 (14:56 -0500)]
drm/radeon/kms: move disp eng pll setup to init path
We really only need to set it up once on init or resume
rather than on every mode set.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Igor Murzov [Sun, 22 Jan 2012 14:47:28 +0000 (18:47 +0400)]
drm/radeon: finish getting bios earlier
Return a number of bytes read in radeon_atrm_get_bios_chunk() and
properly check this value in radeon_atrm_get_bios().
If radeon_atrm_get_bios_chunk() read less bytes then were requested,
it means that it finished reading bios data.
Prior to this patch, condition in radeon_atrm_get_bios() was always
equivalent to "if (ATRM_BIOS_PAGE <= 0)", so it was always false,
thus radeon_atrm_get_bios() was trying to read past the bios data
wasting boot time.
On my lenovo ideapad u455 laptop this patch drops bios reading time
from ~5.5s to ~1.5s.
Signed-off-by: Igor Murzov <e-mail@date.by>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Igor Murzov [Sun, 22 Jan 2012 14:43:25 +0000 (18:43 +0400)]
drm/radeon: fix invalid memory access in radeon_atrm_get_bios()
At a boot time I observed following bug:
BUG: unable to handle kernel paging request at
ffff8800a4244000
IP: [<
ffffffff81275b5b>] memcpy+0xb/0x120
PGD
1816063 PUD
1fe7d067 PMD
1ff9f067 PTE
80000000a4244160
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
CPU 0
Modules linked in: btusb bluetooth brcmsmac brcmutil crc8 cordic b43 radeon(+)
mac80211 cfg80211 ttm ohci_hcd drm_kms_helper rfkill drm ssb agpgart mmc_core
sp5100_tco video battery ac thermal processor rtc_cmos thermal_sys snd_hda_codec_hdmi
joydev snd_hda_codec_conexant button bcma pcmcia snd_hda_intel snd_hda_codec
snd_hwdep snd_pcm shpchp pcmcia_core k8temp snd_timer atl1c snd psmouse hwmon
i2c_piix4 i2c_algo_bit soundcore evdev i2c_core ehci_hcd sg serio_raw snd_page_alloc
loop btrfs
Pid: 1008, comm: modprobe Not tainted 3.3.0-rc1 #21 LENOVO 20046 /AMD CRB
RIP: 0010:[<
ffffffff81275b5b>] [<
ffffffff81275b5b>] memcpy+0xb/0x120
RSP: 0018:
ffff8800aa72db00 EFLAGS:
00010246
RAX:
ffff8800a4150000 RBX:
0000000000001000 RCX:
0000000000000087
RDX:
0000000000000000 RSI:
ffff8800a4244000 RDI:
ffff8800a4150bc8
RBP:
ffff8800aa72db78 R08:
0000000000000010 R09:
ffffffff8174bbec
R10:
ffffffff812ee010 R11:
0000000000000001 R12:
0000000000001000
R13:
0000000000010000 R14:
ffff8800a4140000 R15:
ffff8800aaba1800
FS:
00007ff9a3bd4720(0000) GS:
ffff8800afa00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
ffff8800a4244000 CR3:
00000000a9c18000 CR4:
00000000000006f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Process modprobe (pid: 1008, threadinfo
ffff8800aa72c000, task
ffff8800aa0e4000)
Stack:
ffffffffa04e7c7b 0000000000000001 0000000000010000 ffff8800aa72db28
ffffffff00000001 0000000000001000 ffffffff8113cbef 0000000000000020
ffff8800a4243420 ffff880000000002 ffff8800aa72db08 ffff8800a9d42000
Call Trace:
[<
ffffffffa04e7c7b>] ? radeon_atrm_get_bios_chunk+0x8b/0xd0 [radeon]
[<
ffffffff8113cbef>] ? kmalloc_order_trace+0x3f/0xb0
[<
ffffffffa04a9298>] radeon_get_bios+0x68/0x2f0 [radeon]
[<
ffffffffa04c7a30>] rv770_init+0x40/0x280 [radeon]
[<
ffffffffa047d740>] radeon_device_init+0x560/0x600 [radeon]
[<
ffffffffa047ef4f>] radeon_driver_load_kms+0xaf/0x170 [radeon]
[<
ffffffffa043cdde>] drm_get_pci_dev+0x18e/0x2c0 [drm]
[<
ffffffffa04e7e95>] radeon_pci_probe+0xad/0xb5 [radeon]
[<
ffffffff81296c5f>] local_pci_probe+0x5f/0xd0
[<
ffffffff81297418>] pci_device_probe+0x88/0xb0
[<
ffffffff813417aa>] ? driver_sysfs_add+0x7a/0xb0
[<
ffffffff813418d8>] really_probe+0x68/0x180
[<
ffffffff81341be5>] driver_probe_device+0x45/0x70
[<
ffffffff81341cb3>] __driver_attach+0xa3/0xb0
[<
ffffffff81341c10>] ? driver_probe_device+0x70/0x70
[<
ffffffff813400ce>] bus_for_each_dev+0x5e/0x90
[<
ffffffff8134172e>] driver_attach+0x1e/0x20
[<
ffffffff81341298>] bus_add_driver+0xc8/0x280
[<
ffffffff813422c6>] driver_register+0x76/0x140
[<
ffffffff812976d6>] __pci_register_driver+0x66/0xe0
[<
ffffffffa043d021>] drm_pci_init+0x111/0x120 [drm]
[<
ffffffff8133c67a>] ? vga_switcheroo_register_handler+0x3a/0x60
[<
ffffffffa0229000>] ? 0xffffffffa0228fff
[<
ffffffffa02290ec>] radeon_init+0xec/0xee [radeon]
[<
ffffffff810002f2>] do_one_initcall+0x42/0x180
[<
ffffffff8109d8d2>] sys_init_module+0x92/0x1e0
[<
ffffffff815407a9>] system_call_fastpath+0x16/0x1b
Code: 58 2a 43 50 88 43 4e 48 83 c4 08 5b c9 c3 66 90 e8 cb fd ff ff eb
e6 90 90 90 90 90 90 90 90 90 48 89 f8 89 d1 c1 e9 03 83 e2 07 <f3> 48
a5 89 d1 f3 a4 c3 20 48 83 ea 20 4c 8b 06 4c 8b 4e 08 4c
RIP [<
ffffffff81275b5b>] memcpy+0xb/0x120
RSP <
ffff8800aa72db00>
CR2:
ffff8800a4244000
---[ end trace
fcffa1599cf56382 ]---
Call to acpi_evaluate_object() not always returns 4096 bytes chunks,
on my system it can return 2048 bytes chunk, so pass the length of
retrieved chunk to memcpy(), not the length of the recieving buffer.
Signed-off-by: Igor Murzov <e-mail@date.by>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jesper Juhl [Mon, 23 Jan 2012 20:02:57 +0000 (21:02 +0100)]
ALSA: Fix memory leak on error in snd_compr_set_params()
If copy_from_user() does not return 0 we'll leak the memory we
allocated for 'params' when that variable goes out of scope.
Also a small CodingStyle cleanup: Use braces on both branches of
if/else when one branch needs it.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Raymond Yau [Tue, 17 Jan 2012 03:41:47 +0000 (11:41 +0800)]
ALSA: ymfpci - Don't create invalid PCM & mixers when AC97 doesn't support
- check SDAC bit of AC97 primary codec when create "rear" device 3,
"4ch" device 2 and "4ch Duplication" switch as the card need a four channels
AC97 codec to support surround40.
Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jesper Juhl [Mon, 23 Jan 2012 21:28:44 +0000 (22:28 +0100)]
ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on error
In wm2000_i2c_probe(), if we take the true branch in
"
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000,
NULL, 0);
if (ret != 0)
goto err_fw;
"
then we'll release_firmware(fw) at the 'err_fw' label. But we've already
done that just a few lines above. That's a use-after-free bug.
This patch restructures the code so that we always call
release_firmware(fw) before leaving the function, but only ever call
it once.
This means that we have to initialize 'fw' to NULL since some paths
may now end up calling it without having called request_firmware(),
but since request_firmware() deals gracefully with NULL pointers, we
are fine if we just NULL initialize it.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Rothwell [Tue, 24 Jan 2012 00:41:32 +0000 (11:41 +1100)]
migrate_mode.h is not exported to user mode
so move its include into fs.h inside the __KERNEL__ protection.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Len Brown [Tue, 24 Jan 2012 00:47:06 +0000 (19:47 -0500)]
Merge branches 'atomicio-apei', 'hotplug', 'sony-nvs-nosave' and 'thermal-netlink' into release
Luck, Tony [Mon, 23 Jan 2012 23:27:56 +0000 (15:27 -0800)]
Use acpi_os_map_memory() instead of ioremap() in einj driver
ioremap() has become more picky and is now spitting out console messages like:
ioremap error for 0xbddbd000-0xbddbe000, requested 0x10, got 0x0
when loading the einj driver. What we are trying to so here is map
a couple of data structures that the EINJ table points to. Perhaps
acpi_os_map_memory() is a better tool for this?
Most importantly it works, but as a side benefit it maps the structures
into kernel virtual space so we can access them with normal C memory
dereferences, so instead of using:
writel(param1, &v5param->apicid);
we can use the more natural:
v5param->apicid = param1;
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Dan Carpenter [Fri, 20 Jan 2012 07:57:14 +0000 (10:57 +0300)]
ACPI, APEI, EINJ, cleanup 0 vs NULL confusion
This function is returning pointers. Sparse complains here:
drivers/acpi/apei/einj.c:262:32: warning:
Using plain integer as NULL pointer
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Niklas Söderlund [Mon, 9 Jan 2012 15:49:44 +0000 (16:49 +0100)]
ACPI, APEI, EINJ Allow empty Trigger Error Action Table
According to the ACPI spec [1] section 18.6.4 the TRIGGER_ERROR action
table can consists of zero elements.
[1] Advanced Configuration and Power Interface Specification
Revision 5.0, December 6, 2011
http://www.acpi.info/DOWNLOADS/ACPIspec50.pdf
Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Mon, 23 Jan 2012 23:11:27 +0000 (15:11 -0800)]
Merge tag 'pm-fixes-for-3.3' of git://git./linux/kernel/git/rafael/linux-pm
Power management fixes for 3.3
Two fixes for regressions introduced during the merge window, one fix for
a long-standing obscure issue in the computation of hibernate image size
and two small PM documentation fixes.
* tag 'pm-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Sleep: Fix read_unlock_usermodehelper() call.
PM / Hibernate: Rewrite unlock_system_sleep() to fix s2disk regression
PM / Hibernate: Correct additional pages number calculation
PM / Documentation: Fix minor issue in freezing_of_tasks.txt
PM / Documentation: Fix spelling mistake in basic-pm-debugging.txt
Linus Torvalds [Mon, 23 Jan 2012 22:50:30 +0000 (14:50 -0800)]
Merge tag 'arm-soc-imx-move' of git://git./linux/kernel/git/arm/arm-soc
Consolidate i.MX 5 platforms to be under the new shared i.MX 3/5/6 tree.
* tag 'arm-soc-imx-move' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM i.MX: Update defconfig
ARM i.MX: Merge i.MX5 support into mach-imx
ARM i.MX5: remove unnecessary includes from board files
Fix up fairly trivial conflicts due to various changes nearby in
arch/arm/{mach,plat}-imx/{Kconfig,Makefile}
Pull request had been sent to the wrong email address, but happened
before the merge window closed. I'm merging the MX 5 consolidation,
since it apparently will help the next development window and will avoid
conflicts later as per Arnd.
Jesper Juhl [Mon, 23 Jan 2012 20:15:48 +0000 (21:15 +0100)]
ASoC: wm8958: Use correct format string in dev_err() call
To print a value of type size_t one should use %zd, not %d.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tetsuo Handa [Mon, 23 Jan 2012 20:59:08 +0000 (21:59 +0100)]
PM / Sleep: Fix read_unlock_usermodehelper() call.
Commit
b298d289
"PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()"
added read_unlock_usermodehelper() but read_unlock_usermodehelper() is called
without read_lock_usermodehelper() when kmalloc() failed.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Mauro Carvalho Chehab [Mon, 23 Jan 2012 15:15:22 +0000 (13:15 -0200)]
[media] cinergyT2-fe: Fix bandwdith settings
Changeset
7830bbaff9f mangled the bandwidth field for CinergyT2.
Properly fill it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>