Merge 4.4.57 to android-4.4

Changes in 4.4.57:
usb: core: hub: hub_port_init lock controller instead of bus
USB: don't free bandwidth_mutex too early
crypto: ghash-clmulni - Fix load failure
crypto: cryptd - Assign statesize properly
crypto: mcryptd - Fix load failure
cxlflash: Increase cmd_per_lun for better throughput
ACPI / video: skip evaluating _DOD when it does not exist
pinctrl: cherryview: Do not mask all interrupts in probe
Drivers: hv: balloon: don't crash when memory is added in non-sorted order
Drivers: hv: avoid vfree() on crash
xen/qspinlock: Don't kick CPU if IRQ is not initialized
KVM: PPC: Book3S PR: Fix illegal opcode emulation
s390/pci: fix use after free in dma_init
drm/amdgpu: add missing irq.h include
tpm_tis: Use devm_free_irq not free_irq
hv_netvsc: use skb_get_hash() instead of a homegrown implementation
kernek/fork.c: allocate idle task for a CPU always on its local node
give up on gcc ilog2() constant optimizations
perf/core: Fix event inheritance on fork()
cpufreq: Fix and clean up show_cpuinfo_cur_freq()
powerpc/boot: Fix zImage TOC alignment
md/raid1/10: fix potential deadlock
target/pscsi: Fix TYPE_TAPE + TYPE_MEDIMUM_CHANGER export
scsi: lpfc: Add shutdown method for kexec
scsi: libiscsi: add lock around task lists to fix list corruption regression
target: Fix VERIFY_16 handling in sbc_parse_cdb
isdn/gigaset: fix NULL-deref at probe
gfs2: Avoid alignment hole in struct lm_lockname
percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages
ext4: fix fencepost in s_first_meta_bg validation
Linux 4.4.57

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Linux 4.4.57

ext4: fix fencepost in s_first_meta_bg validation

commit 2ba3e6e8afc9b6188b471f27cf2b5e3cf34e7af2 upstream.

It is OK for s_first_meta_bg to be equal to the number of block group
descriptor blocks.  (It rarely happens, but it shouldn't cause any
problems.)

https://bugzilla.kernel.org/show_bug.cgi?id=194567

Fixes: 3a4b77cd47bb837b8557595ec7425f281f2ca1fe
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages

commit 320661b08dd6f1746d5c7ab4eb435ec64b97cd45 upstream.

Update to pcpu_nr_empty_pop_pages in pcpu_alloc() is currently done
without holding pcpu_lock. This can lead to bad updates to the variable.
Add missing lock calls.

Fixes: b539b87fed37 ("percpu: implmeent pcpu_nr_empty_pop_pages and chunk->nr_populated")
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Avoid alignment hole in struct lm_lockname

commit 28ea06c46fbcab63fd9a55531387b7928a18a590 upstream.

Commit 88ffbf3e03 switches to using rhashtables for glocks, hashing over
the entire struct lm_lockname instead of its individual fields.  On some
architectures, struct lm_lockname contains a hole of uninitialized
memory due to alignment rules, which now leads to incorrect hash values.
Get rid of that hole.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isdn/gigaset: fix NULL-deref at probe

commit 68c32f9c2a36d410aa242e661506e5b2c2764179 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: cf7776dc05b8 ("[PATCH] isdn4linux: Siemens Gigaset drivers - direct USB connection")
Cc: Hansjoerg Lipp <hjlipp@web.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix VERIFY_16 handling in sbc_parse_cdb

commit 13603685c1f12c67a7a2427f00b63f39a2b6f7c9 upstream.

As reported by Max, the Windows 2008 R2 chkdsk utility expects
VERIFY_16 to be supported, and does not handle the returned
CHECK_CONDITION properly, resulting in an infinite loop.

The kernel will log huge amounts of this error:

kernel: TARGET_CORE[iSCSI]: Unsupported SCSI Opcode 0x8f, sending
CHECK_CONDITION.

Signed-off-by: Max Lohrmann <post@wickenrode.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libiscsi: add lock around task lists to fix list corruption regression

commit 6f8830f5bbab16e54f261de187f3df4644a5b977 upstream.

There's a rather long standing regression from the commit "libiscsi:
Reduce locking contention in fast path"

Depending on iSCSI target behavior, it's possible to hit the case in
iscsi_complete_task where the task is still on a pending list
(!list_empty(&task->running)).  When that happens the task is removed
from the list while holding the session back_lock, but other task list
modification occur under the frwd_lock.  That leads to linked list
corruption and eventually a panicked system.

Rather than back out the session lock split entirely, in order to try
and keep some of the performance gains this patch adds another lock to
maintain the task lists integrity.

Major enterprise supported kernels have been backing out the lock split
for while now, thanks to the efforts at IBM where a lab setup has the
most reliable reproducer I've seen on this issue.  This patch has been
tested there successfully.

Signed-off-by: Chris Leech <cleech@redhat.com>
Fixes: 659743b02c41 ("[SCSI] libiscsi: Reduce locking contention in fast path")
Reported-by: Prashantha Subbarao <psubbara@us.ibm.com>
Reviewed-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Add shutdown method for kexec

commit 85e8a23936ab3442de0c42da97d53b29f004ece1 upstream.

We see lpfc devices regularly fail during kexec. Fix this by adding a
shutdown method which mirrors the remove method.

Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/pscsi: Fix TYPE_TAPE + TYPE_MEDIMUM_CHANGER export

commit a04e54f2c35823ca32d56afcd5cea5b783e2f51a upstream.

The following fixes a divide by zero OOPs with TYPE_TAPE
due to pscsi_tape_read_blocksize() failing causing a zero
sd->sector_size being propigated up via dev_attrib.hw_block_size.

It also fixes another long-standing bug where TYPE_TAPE and
TYPE_MEDIMUM_CHANGER where using pscsi_create_type_other(),
which does not call scsi_device_get() to take the device
reference.  Instead, rename pscsi_create_type_rom() to
pscsi_create_type_nondisk() and use it for all cases.

Finally, also drop a dump_stack() in pscsi_get_blocks() for
non TYPE_DISK, which in modern target-core can get invoked
via target_sense_desc_format() during CHECK_CONDITION.

Reported-by: Malcolm Haak <insanemal@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid1/10: fix potential deadlock

commit 61eb2b43b99ebdc9bc6bc83d9792257b243e7cb3 upstream.

Neil Brown pointed out a potential deadlock in raid 10 code with
bio_split/chain. The raid1 code could have the same issue, but recent
barrier rework makes it less likely to happen. The deadlock happens in
below sequence:

1. generic_make_request(bio), this will set current->bio_list
2. raid10_make_request will split bio to bio1 and bio2
3. __make_request(bio1), wait_barrer, add underlayer disk bio to
current->bio_list
4. __make_request(bio2), wait_barrer

If raise_barrier happens between 3 & 4, since wait_barrier runs at 3,
raise_barrier waits for IO completion from 3. And since raise_barrier
sets barrier, 4 waits for raise_barrier. But IO from 3 can't be
dispatched because raid10_make_request() doesn't finished yet.

The solution is to adjust the IO ordering. Quotes from Neil:
"
It is much safer to:

    if (need to split) {
        split = bio_split(bio, ...)
        bio_chain(...)
        make_request_fn(split);
        generic_make_request(bio);
   } else
        make_request_fn(mddev, bio);

This way we first process the initial section of the bio (in 'split')
which will queue some requests to the underlying devices.  These
requests will be queued in generic_make_request.
Then we queue the remainder of the bio, which will be added to the end
of the generic_make_request queue.
Then we return.
generic_make_request() will pop the lower-level device requests off the
queue and handle them first.  Then it will process the remainder
of the original bio once the first section has been fully processed.
"

Note, this only happens in read path. In write path, the bio is flushed to
underlaying disks either by blk flush (from schedule) or offladed to raid1/10d.
It's queued in current->bio_list.

Cc: Coly Li <colyli@suse.de>
Suggested-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/boot: Fix zImage TOC alignment

commit 97ee351b50a49717543533cfb85b4bf9d88c9680 upstream.

Recent toolchains force the TOC to be 256 byte aligned. We need to
enforce this alignment in the zImage linker script, otherwise pointers
to our TOC variables (__toc_start) could be incorrect. If the actual
start of the TOC and __toc_start don't have the same value we crash
early in the zImage wrapper.

Suggested-by: Alan Modra <amodra@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Fix and clean up show_cpuinfo_cur_freq()

commit 9b4f603e7a9f4282aec451063ffbbb8bb410dcd9 upstream.

There is a missing newline in show_cpuinfo_cur_freq(), so add it,
but while at it clean that function up somewhat too.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Fix event inheritance on fork()

commit e7cc4865f0f31698ef2f7aac01a50e78968985b7 upstream.

While hunting for clues to a use-after-free, Oleg spotted that
perf_event_init_context() can loose an error value with the result
that fork() can succeed even though we did not fully inherit the perf
event context.

Spotted-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: oleg@redhat.com
Fixes: 889ff0150661 ("perf/core: Split context's event group list into pinned and non-pinned lists")
Link: http://lkml.kernel.org/r/20170316125823.190342547@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

give up on gcc ilog2() constant optimizations

commit 474c90156c8dcc2fa815e6716cc9394d7930cb9c upstream.

gcc-7 has an "optimization" pass that completely screws up, and
generates the code expansion for the (impossible) case of calling
ilog2() with a zero constant, even when the code gcc compiles does not
actually have a zero constant.

And we try to generate a compile-time error for anybody doing ilog2() on
a constant where that doesn't make sense (be it zero or negative).  So
now gcc7 will fail the build due to our sanity checking, because it
created that constant-zero case that didn't actually exist in the source
code.

There's a whole long discussion on the kernel mailing about how to work
around this gcc bug.  The gcc people themselevs have discussed their
"feature" in

   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=72785

but it's all water under the bridge, because while it looked at one
point like it would be solved by the time gcc7 was released, that was
not to be.

So now we have to deal with this compiler braindamage.

And the only simple approach seems to be to just delete the code that
tries to warn about bad uses of ilog2().

So now "ilog2()" will just return 0 not just for the value 1, but for
any non-positive value too.

It's not like I can recall anybody having ever actually tried to use
this function on any invalid value, but maybe the sanity check just
meant that such code never made it out in public.

Reported-by: Laura Abbott <labbott@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>,
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernek/fork.c: allocate idle task for a CPU always on its local node

commit 725fc629ff2545b061407305ae51016c9f928fce upstream.

Linux preallocates the task structs of the idle tasks for all possible
CPUs.  This currently means they all end up on node 0.  This also
implies that the cache line of MWAIT, which is around the flags field in
the task struct, are all located in node 0.

We see a noticeable performance improvement on Knights Landing CPUs when
the cache lines used for MWAIT are located in the local nodes of the
CPUs using them.  I would expect this to give a (likely slight)
improvement on other systems too.

The patch implements placing the idle task in the node of its CPUs, by
passing the right target node to copy_process()

[akpm@linux-foundation.org: use NUMA_NO_NODE, not a bare -1]
Link: http://lkml.kernel.org/r/1463492694-15833-1-git-send-email-andi@firstfloor.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: use skb_get_hash() instead of a homegrown implementation

commit 757647e10e55c01fb7a9c4356529442e316a7c72 upstream.

Recent changes to 'struct flow_keys' (e.g commit d34af823ff40 ("net: Add
VLAN ID to flow_keys")) introduced a performance regression in netvsc
driver. Is problem is, however, not the above mentioned commit but the
fact that netvsc_set_hash() function did some assumptions on the struct
flow_keys data layout and this is wrong.

Get rid of netvsc_set_hash() by switching to skb_get_hash(). This change
will also imply switching to Jenkins hash from the currently used Toeplitz
but it seems there is no good excuse for Toeplitz to stay.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm_tis: Use devm_free_irq not free_irq

commit 727f28b8ca24a581c7bd868326b8cea1058c720a upstream.

The interrupt is always allocated with devm_request_irq so it
must always be freed with devm_free_irq.

Fixes: 448e9c55c12d ("tpm_tis: verify interrupt during init")
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add missing irq.h include

commit e9c5e7402dad6f4f04c2430db6f283512bcd4392 upstream.

this fixes the build on arm.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pci: fix use after free in dma_init

commit dba599091c191d209b1499511a524ad9657c0e5a upstream.

After a failure during registration of the dma_table (because of the
function being in error state) we free its memory but don't reset the
associated pointer to zero.

When we then receive a notification from firmware (about the function
being in error state) we'll try to walk and free the dma_table again.

Fix this by resetting the dma_table pointer. In addition to that make
sure that we free the iommu_bitmap when appropriate.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S PR: Fix illegal opcode emulation

commit 708e75a3ee750dce1072134e630d66c4e6eaf63c upstream.

If kvmppc_handle_exit_pr() calls kvmppc_emulate_instruction() to emulate
one instruction (in the BOOK3S_INTERRUPT_H_EMUL_ASSIST case), it calls
kvmppc_core_queue_program() afterwards if kvmppc_emulate_instruction()
returned EMULATE_FAIL, so the guest gets an program interrupt for the
illegal opcode.
However, the kvmppc_emulate_instruction() also tried to inject a
program exception for this already, so the program interrupt gets
injected twice and the return address in srr0 gets destroyed.
All other callers of kvmppc_emulate_instruction() are also injecting
a program interrupt, and since the callers have the right knowledge
about the srr1 flags that should be used, it is the function
kvmppc_emulate_instruction() that should _not_ inject program
interrupts, so remove the kvmppc_core_queue_program() here.

This fixes the issue discovered by Laurent Vivier with kvm-unit-tests
where the logs are filled with these messages when the test tries
to execute an illegal instruction:

     Couldn't emulate instruction 0x00000000 (op 0 xop 0)
     kvmppc_handle_exit_pr: emulation at 700 failed (00000000)

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/qspinlock: Don't kick CPU if IRQ is not initialized

commit 707e59ba494372a90d245f18b0c78982caa88e48 upstream.

The following commit:

  1fb3a8b2cfb2 ("xen/spinlock: Fix locking path engaging too soon under PVHVM.")

... moved the initalization of the kicker interrupt until after
native_cpu_up() is called.

However, when using qspinlocks, a CPU may try to kick another CPU that is
spinning (because it has not yet initialized its kicker interrupt), resulting
in the following crash during boot:

  kernel BUG at /build/linux-Ay7j_C/linux-4.4.0/drivers/xen/events/events_base.c:1210!
  invalid opcode: 0000 [#1] SMP
  ...
  RIP: 0010:[<ffffffff814c97c9>]  [<ffffffff814c97c9>] xen_send_IPI_one+0x59/0x60
  ...
  Call Trace:
   [<ffffffff8102be9e>] xen_qlock_kick+0xe/0x10
   [<ffffffff810cabc2>] __pv_queued_spin_unlock+0xb2/0xf0
   [<ffffffff810ca6d1>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20
   [<ffffffff81052936>] ? check_tsc_warp+0x76/0x150
   [<ffffffff81052aa6>] check_tsc_sync_source+0x96/0x160
   [<ffffffff81051e28>] native_cpu_up+0x3d8/0x9f0
   [<ffffffff8102b315>] xen_hvm_cpu_up+0x35/0x80
   [<ffffffff8108198c>] _cpu_up+0x13c/0x180
   [<ffffffff81081a4a>] cpu_up+0x7a/0xa0
   [<ffffffff81f80dfc>] smp_init+0x7f/0x81
   [<ffffffff81f5a121>] kernel_init_freeable+0xef/0x212
   [<ffffffff81817f30>] ? rest_init+0x80/0x80
   [<ffffffff81817f3e>] kernel_init+0xe/0xe0
   [<ffffffff8182488f>] ret_from_fork+0x3f/0x70
   [<ffffffff81817f30>] ? rest_init+0x80/0x80

To fix this, only send the kick if the target CPU's interrupt has been
initialized. This check isn't racy, because the target is waiting for
the spinlock, so it won't have initialized the interrupt in the
meantime.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: avoid vfree() on crash

commit a9f61ca793becabdefab03b77568d6c6f8c1bc79 upstream.

When we crash from NMI context (e.g. after NMI injection from host when
'sysctl -w kernel.unknown_nmi_panic=1' is set) we hit

    kernel BUG at mm/vmalloc.c:1530!

as vfree() is denied. While the issue could be solved with in_nmi() check
instead I opted for skipping vfree on all sorts of crashes to reduce the
amount of work which can cause consequent crashes. We don't really need to
free anything on crash.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: balloon: don't crash when memory is added in non-sorted order

commit 77c0c9735bc0ba5898e637a3a20d6bcb50e3f67d upstream.

When we iterate through all HA regions in handle_pg_range() we have an
assumption that all these regions are sorted in the list and the
'start_pfn >= has->end_pfn' check is enough to find the proper region.
Unfortunately it's not the case with WS2016 where host can hot-add regions
in a different order. We end up modifying the wrong HA region and crashing
later on pages online. Modify the check to make sure we found the region
we were searching for while iterating. Fix the same check in pfn_covered()
as well.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: cherryview: Do not mask all interrupts in probe

commit bcb48cca23ec9852739e4a464307fa29515bbe48 upstream.

The Cherryview GPIO controller has 8 or 16 wires connected to the I/O-APIC
which can be used directly by the platform/BIOS or drivers. One such wire
is used as SCI (System Control Interrupt) which ACPI depends on to be able
to trigger GPEs (General Purpose Events).

The pinctrl driver itself uses another IRQ resource which is wire OR of all
the 8 (or 16) wires and follows what BIOS has programmed to the IntSel
register of each pin.

Currently the driver masks all interrupts at probe time and this prevents
these direct interrupts from working as expected. The reason for this is
that some early stage prototypes had some pins misconfigured causing lots
of spurious interrupts.

We fix this by leaving the interrupt mask untouched. This allows SCI and
other direct interrupts work properly. What comes to the possible spurious
interrupts we switch the default handler to be handle_bad_irq() instead of
handle_simple_irq() (which was not correct anyway).

Reported-by: Yu C Chen <yu.c.chen@intel.com>
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / video: skip evaluating _DOD when it does not exist

commit e34fbbac669de0b7fb7803929d0477f35f6e2833 upstream.

Some system supports hybrid graphics and its discrete VGA
does not have any connectors and therefore has no _DOD method.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxlflash: Increase cmd_per_lun for better throughput

commit 83430833b4d4a9c9b23964babbeb1f36450f8136 upstream.

With the current value of cmd_per_lun at 16, the throughput
over a single adapter is limited to around 150kIOPS.

Increase the value of cmd_per_lun to 256 to improve
throughput. With this change a single adapter is able to
attain close to the maximum throughput (380kIOPS).
Also change the number of RRQ entries that can be queued.

Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: mcryptd - Fix load failure

commit ddef482420b1ba8ec45e6123a7e8d3f67b21e5e3 upstream.

mcryptd_create_hash() fails by returning -EINVAL, causing any
driver using mcryptd to fail to load. It is because it needs
to set its statesize properly.

Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: cryptd - Assign statesize properly

commit 1a07834024dfca5c4bed5de8f8714306e0a11836 upstream.

cryptd_create_hash() fails by returning -EINVAL.  It is because after
8996eafdc ("crypto: ahash - ensure statesize is non-zero") all ahash
drivers must have a non-zero statesize.

This patch fixes the problem by properly assigning the statesize.

Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ghash-clmulni - Fix load failure

commit 3a020a723c65eb8ffa7c237faca26521a024e582 upstream.

ghash_clmulni_intel fails to load on Linux 4.3+ with the following message:
"modprobe: ERROR: could not insert 'ghash_clmulni_intel': Invalid argument"

After 8996eafdc ("crypto: ahash - ensure statesize is non-zero") all ahash
drivers are required to implement import()/export(), and must have a non-
zero statesize.

This patch has been tested with the algif_hash interface. The calculated
digest values, after several rounds of import()s and export()s, match those
calculated by tcrypt.

Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: don't free bandwidth_mutex too early

commit ab2a4bf83902c170d29ba130a8abb5f9d90559e1 upstream.

The USB core contains a bug that can show up when a USB-3 host
controller is removed.  If the primary (USB-2) hcd structure is
released before the shared (USB-3) hcd, the core will try to do a
double-free of the common bandwidth_mutex.

The problem was described in graphical form by Chung-Geol Kim, who
first reported it:

=================================================
     At *remove USB(3.0) Storage
     sequence <1> --> <5> ((Problem Case))
=================================================
                                  VOLD
------------------------------------|------------
                                 (uevent)
                            ________|_________
                           |<1>               |
                           |dwc3_otg_sm_work  |
                           |usb_put_hcd       |
                           |peer_hcd(kref=2)|
                           |__________________|
                            ________|_________
                           |<2>               |
                           |New USB BUS #2    |
                           |                  |
                           |peer_hcd(kref=1)  |
                           |                  |
                         --(Link)-bandXX_mutex|
                         | |__________________|
                         |
    ___________________  |
   |<3>                | |
   |dwc3_otg_sm_work   | |
   |usb_put_hcd        | |
   |primary_hcd(kref=1)| |
   |___________________| |
    _________|_________  |
   |<4>                | |
   |New USB BUS #1     | |
   |hcd_release        | |
   |primary_hcd(kref=0)| |
   |                   | |
   |bandXX_mutex(free) |<-
   |___________________|
                               (( VOLD ))
                            ______|___________
                           |<5>               |
                           |      SCSI        |
                           |usb_put_hcd       |
                           |peer_hcd(kref=0)  |
                           |*hcd_release      |
                           |bandXX_mutex(free*)|<- double free
                           |__________________|

=================================================

This happens because hcd_release() frees the bandwidth_mutex whenever
it sees a primary hcd being released (which is not a very good idea
in any case), but in the course of releasing the primary hcd, it
changes the pointers in the shared hcd in such a way that the shared
hcd will appear to be primary when it gets released.

This patch fixes the problem by changing hcd_release() so that it
deallocates the bandwidth_mutex only when the _last_ hcd structure
referencing it is released.  The patch also removes an unnecessary
test, so that when an hcd is released, both the shared_hcd and
primary_hcd pointers in the hcd's peer will be cleared.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Chung-Geol Kim <chunggeol.kim@samsung.com>
Tested-by: Chung-Geol Kim <chunggeol.kim@samsung.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: hub: hub_port_init lock controller instead of bus

commit feb26ac31a2a5cb88d86680d9a94916a6343e9e6 upstream.

The XHCI controller presents two USB buses to the system - one for USB2
and one for USB3. The hub init code (hub_port_init) is reentrant but
only locks one bus per thread, leading to a race condition failure when
two threads attempt to simultaneously initialise a USB2 and USB3 device:

[    8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   13.183701] usb 3-3: device descriptor read/all, error -110

On a test system this failure occurred on 6% of all boots.

The call traces at the point of failure are:

Call Trace:
 [<ffffffff81b9bab7>] schedule+0x37/0x90
 [<ffffffff817da7cd>] usb_kill_urb+0x8d/0xd0
 [<ffffffff8111e5e0>] ? wake_up_atomic_t+0x30/0x30
 [<ffffffff817dafbe>] usb_start_wait_urb+0xbe/0x150
 [<ffffffff817db10c>] usb_control_msg+0xbc/0xf0
 [<ffffffff817d07de>] hub_port_init+0x51e/0xb70
 [<ffffffff817d4697>] hub_event+0x817/0x1570
 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620
 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620
 [<ffffffff810f4684>] worker_thread+0x64/0x4b0
 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390
 [<ffffffff810fa7f5>] kthread+0x105/0x120
 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200
 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70
 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200

Call Trace:
 [<ffffffff817fd36d>] xhci_setup_device+0x53d/0xa40
 [<ffffffff817fd87e>] xhci_address_device+0xe/0x10
 [<ffffffff817d047f>] hub_port_init+0x1bf/0xb70
 [<ffffffff811247ed>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff817d4697>] hub_event+0x817/0x1570
 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620
 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620
 [<ffffffff810f4684>] worker_thread+0x64/0x4b0
 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390
 [<ffffffff810fa7f5>] kthread+0x105/0x120
 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200
 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70
 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200

Which results from the two call chains:

hub_port_init
 usb_get_device_descriptor
  usb_get_descriptor
   usb_control_msg
    usb_internal_control_msg
     usb_start_wait_urb
      usb_submit_urb / wait_for_completion_timeout / usb_kill_urb

hub_port_init
 hub_set_address
  xhci_address_device
   xhci_setup_device

Mathias Nyman explains the current behaviour violates the XHCI spec:

 hub_port_reset() will end up moving the corresponding xhci device slot
 to default state.

 As hub_port_reset() is called several times in hub_port_init() it
 sounds reasonable that we could end up with two threads having their
 xhci device slots in default state at the same time, which according to
 xhci 4.5.3 specs still is a big no no:

 "Note: Software shall not transition more than one Device Slot to the
  Default State at a time"

 So both threads fail at their next task after this.
 One fails to read the descriptor, and the other fails addressing the
 device.

Fix this in hub_port_init by locking the USB controller (instead of an
individual bus) to prevent simultaneous initialisation of both buses.

Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel")
Link: https://lkml.org/lkml/2016/2/8/312
Link: https://lkml.org/lkml/2016/2/4/748
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
 [sumits: minor merge conflict resolution for linux-4.4.y]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ANDROID: sdcardfs: Fix style issues in macros

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Bug: 35331000
Change-Id: I89c4035029dc2236081a7685c55cac595d9e7ebf

ANDROID: sdcardfs: Use seq_puts over seq_printf

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Bug: 35331000
Change-Id: I3795ec61ce61e324738815b1ce3b0e09b25d723f

ANDROID: sdcardfs: Use to kstrout

Switch from deprecated simple_strtoul to kstrout

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Bug: 35331000
Change-Id: If18bd133b4d2877f71e58b58fc31371ff6613ed5

ANDROID: sdcardfs: Use pr_[...] instead of printk

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Bug: 35331000
Change-Id: Ibc635ec865750530d32b87067779f681fe58a003

ANDROID: sdcardfs: remove unneeded null check

As pointed out by checkpatch, these functions already
handle null inputs, so the checks are not needed.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Bug: 35331000
Change-Id: I189342f032dfcefee36b27648bb512488ad61d20

ANDROID: sdcardfs: Fix style issues with comments

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Bug: 35331000
Change-Id: I8791ef7eac527645ecb9407908e7e5ece35b8f80

ANDROID: sdcardfs: Fix formatting

This fixes various spacing and bracket related issues
pointed out by checkpatch.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Bug: 35331000
Change-Id: I6e248833a7a04e3899f3ae9462d765cfcaa70c96

ANDROID: sdcardfs: correct order of descriptors

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Bug: 35331000
Change-Id: Ia6d16b19c8c911f41231d2a12be0740057edfacf

fix the deadlock in xt_qtaguid when enable DDEBUG

When DDEBUG is enabled, the prdebug_full_state() function will try to
recursively aquire the spinlock of sock_tag_list and causing deadlock. A
check statement is added before it aquire the spinlock to differentiate
the behavior depend on the caller of the function.

Bug: 36559739
Test: Compile and run test under system/extra/test/iptables/
Change-Id: Ie3397fbaa207e14fe214d47aaf5e8ca1f4a712ee
Signed-off-by: Chenbo Feng <fengc@google.com>

net: ipv6: Add sysctl for minimum prefix len acceptable in RIOs.

This commit adds a new sysctl accept_ra_rt_info_min_plen that
defines the minimum acceptable prefix length of Route Information
Options. The new sysctl is intended to be used together with
accept_ra_rt_info_max_plen to configure a range of acceptable
prefix lengths. It is useful to prevent misconfigurations from
unintentionally blackholing too much of the IPv6 address space
(e.g., home routers announcing RIOs for fc00::/7, which is
incorrect).

[backport of net-next bbea124bc99df968011e76eba105fe964a4eceab]
Bug: 33333670
Test: net_test passes

Signed-off-by: Joel Scherpelz <jscherpelz@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 4.4.56
am: 0136bca4e0

Change-Id: I222649f657066fe86bc7f8380b869e5e9c8a23f3

futex: Add missing error handling to FUTEX_REQUEUE_PI
am: 99d403faba

Change-Id: I7d99bd76a3d1cd329295b157eb179fc194029c5d

futex: Fix potential use-after-free in FUTEX_REQUEUE_PI
am: 44854c191e

Change-Id: I361f387f34ccb2a497290c3f1f33803cc899b7da

x86/perf: Fix CR4.PCE propagation to use active_mm instead of mm
am: 62f57041fb

Change-Id: I49a7e668ab62da72a19802ed047bb925a7fb14f0

x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=y
am: 8e0ec20539

Change-Id: I232544f0d96384f70c58b37f41f524ff4bc808fe

fscrypto: lock inode while setting encryption policy
am: 3a19419c50

Change-Id: I3926f8d43c5d7f4c3648460bc103f24d05b6f3ee

fscrypt: fix renaming and linking special files
am: fd74e8d258

Change-Id: I899984b06cce168a62c3ca6f2df05a6c19fdfc28

net sched actions: decrement module reference count after table flush.
am: c10ffe988f

Change-Id: Ie90a3e257c06baeb2c1e8b190da986990a5c2e7c

dccp: fix memory leak during tear-down of unsuccessful connection request
am: 676fe97852

Change-Id: Ibf191dd00ac72ee187beff00a46be207778ea912

dccp/tcp: fix routing redirect race
am: 4ab956b561

Change-Id: I9cb352108500198e4d94eb8e08b53065e29e31d4

bridge: drop netfilter fake rtable unconditionally
am: 56f9b9502f

Change-Id: I286db307416cce649790533419ec6a735bbcbb3d

ipv6: avoid write to a possibly cloned skb
am: aed728c38c

Change-Id: I7bbff2dcff94ea2804d3f21cd0341379332a47e6

ipv6: make ECMP route replacement less greedy
am: 5f8bc3856e

Change-Id: I6abea1ee369e3ae901dbb615991a112621da03f9

mpls: Send route delete notifications when router module is unloaded
am: b57955ea30

Change-Id: Ica14abfb917ddcf236459f3e6886234a9daac40b

act_connmark: avoid crashing on malformed nlattrs with null parms
am: 710fbeb3f5

Change-Id: Ie14c5fad2baf06f9d7669ef68b16023bd165af17

uapi: fix linux/packet_diag.h userspace compilation error
am: 6c72458ab4

Change-Id: I107c3b445b4f92b52be422542062a0d6e147cc3d

vrf: Fix use-after-free in vrf_xmit
am: e671f1cc58

Change-Id: I9252af147439040890edc2f612d4868806c2324a

dccp: fix use-after-free in dccp_feat_activate_values
am: d0ebde92fb

Change-Id: I80863cbb814b1486069ee311e3f8543c7d34b74a

net: fix socket refcounting in skb_complete_tx_timestamp()
am: ec4d8692b7

Change-Id: Idc05607ffe99175575d7f07e3138e2f4496a5110

net: fix socket refcounting in skb_complete_wifi_ack()
am: 9e7683301b

Change-Id: I00fea5d105075ad526ca753b463f91bcd5db30d0

tcp: fix various issues for sockets morphing to listen state
am: 2681a7853a

Change-Id: I9dd8b9c075e54c8b5fbff08ff06dcd74c7e56d4a

dccp: Unlock sock before calling sk_free()
am: 9216632bf4

Change-Id: Id3dda6def7939123cc232d10fefcd0bb2b020ccc

net: net_enable_timestamp() can be called from irq contexts
am: a70c328597

Change-Id: I79a15d07b95126c554366c5b9c266cdb73e8f823

net: don't call strlen() on the user buffer in packet_bind_spkt()
am: f331d6445a

Change-Id: If72ad0b49abc6132a8e67dede206504aa3985da9

l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv
am: 2cd0afc64e

Change-Id: Ib7bcb274c63e13807b1e25f74b6018866e2d8eb1

ipv4: mask tos for input route
am: 354f79125f

Change-Id: I39b7ce23fe7319187421d3e6f0cdd91b16d1fb8c

vti6: return GRE_KEY for vti6
am: f1b3aae1f1

Change-Id: I62e249897c31124ca45296c2563c9e3d665e49fb

vxlan: correctly validate VXLAN ID against VXLAN_N_VID
am: 51a219a137

Change-Id: Ibe33b8e55a3c7625b7b985260b38b443ffbfadc9

netlink: remove mmapped netlink support
am: 0c0be310ba

Change-Id: I85d714d9cc491fd7cb3d1af553864f22c4f1e8fb

Linux 4.4.56

futex: Add missing error handling to FUTEX_REQUEUE_PI

commit 9bbb25afeb182502ca4f2c4f3f88af0681b34cae upstream.

Thomas spotted that fixup_pi_state_owner() can return errors and we
fail to unlock the rt_mutex in that case.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170304093558.867401760@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: Fix potential use-after-free in FUTEX_REQUEUE_PI

commit c236c8e95a3d395b0494e7108f0d41cf36ec107c upstream.

While working on the futex code, I stumbled over this potential
use-after-free scenario. Dmitry triggered it later with syzkaller.

pi_mutex is a pointer into pi_state, which we drop the reference on in
unqueue_me_pi(). So any access to that pointer after that is bad.

Since other sites already do rt_mutex_unlock() with hb->lock held, see
for example futex_lock_pi(), simply move the unlock before
unqueue_me_pi().

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170304093558.801744246@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/perf: Fix CR4.PCE propagation to use active_mm instead of mm

commit 5dc855d44c2ad960a86f593c60461f1ae1566b6d upstream.

If one thread mmaps a perf event while another thread in the same mm
is in some context where active_mm != mm (which can happen in the
scheduler, for example), refresh_pce() would write the wrong value
to CR4.PCE.  This broke some PAPI tests.

Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 7911d3f7af14 ("perf/x86: Only allow rdpmc if a perf_event is mapped")
Link: http://lkml.kernel.org/r/0c5b38a76ea50e405f9abe07a13dfaef87c173a1.1489694270.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=y

commit be3606ff739d1c1be36389f8737c577ad87e1f57 upstream.

The kernel doesn't boot with both PROFILE_ANNOTATED_BRANCHES=y and KASAN=y
options selected. With branch profiling enabled we end up calling
ftrace_likely_update() before kasan_early_init(). ftrace_likely_update() is
built with KASAN instrumentation, so calling it before kasan has been
initialized leads to crash.

Use DISABLE_BRANCH_PROFILING define to make sure that we don't call
ftrace_likely_update() from early code before kasan_early_init().

Fixes: ef7f0d6a6ca8 ("x86_64: add KASan support")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: kasan-dev@googlegroups.com
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: lkp@01.org
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/20170313163337.1704-1-aryabinin@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscrypto: lock inode while setting encryption policy

commit 8906a8223ad4909b391c5628f7991ebceda30e52 upstream.

i_rwsem needs to be acquired while setting an encryption policy so that
concurrent calls to FS_IOC_SET_ENCRYPTION_POLICY are correctly
serialized (especially the ->get_context() + ->set_context() pair), and
so that new files cannot be created in the directory during or after the
->empty_dir() check.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Richard Weinberger <richard@nod.at>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscrypt: fix renaming and linking special files

commit 42d97eb0ade31e1bc537d086842f5d6e766d9d51 upstream.

Attempting to link a device node, named pipe, or socket file into an
encrypted directory through rename(2) or link(2) always failed with
EPERM.  This happened because fscrypt_has_permitted_context() saw that
the file was unencrypted and forbid creating the link.  This behavior
was unexpected because such files are never encrypted; only regular
files, directories, and symlinks can be encrypted.

To fix this, make fscrypt_has_permitted_context() always return true on
special files.

This will be covered by a test in my encryption xfstests patchset.

Fixes: 9bd8212f981e ("ext4 crypto: add encryption policy and password salt support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net sched actions: decrement module reference count after table flush.

[ Upstream commit edb9d1bff4bbe19b8ae0e71b1f38732591a9eeb2 ]

When tc actions are loaded as a module and no actions have been installed,
flushing them would result in actions removed from the memory, but modules
reference count not being decremented, so that the modules would not be
unloaded.

Following is example with GACT action:

% sudo modprobe act_gact
% lsmod
Module                  Size  Used by
act_gact               16384  0
%
% sudo tc actions ls action gact
%
% sudo tc actions flush action gact
% lsmod
Module                  Size  Used by
act_gact               16384  1
% sudo tc actions flush action gact
% lsmod
Module                  Size  Used by
act_gact               16384  2
% sudo rmmod act_gact
rmmod: ERROR: Module act_gact is in use
....

After the fix:
% lsmod
Module                  Size  Used by
act_gact               16384  0
%
% sudo tc actions add action pass index 1
% sudo tc actions add action pass index 2
% sudo tc actions add action pass index 3
% lsmod
Module                  Size  Used by
act_gact               16384  3
%
% sudo tc actions flush action gact
% lsmod
Module                  Size  Used by
act_gact               16384  0
%
% sudo tc actions flush action gact
% lsmod
Module                  Size  Used by
act_gact               16384  0
% sudo rmmod act_gact
% lsmod
Module                  Size  Used by
%

Fixes: f97017cdefef ("net-sched: Fix actions flushing")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: fix memory leak during tear-down of unsuccessful connection request

[ Upstream commit 72ef9c4125c7b257e3a714d62d778ab46583d6a3 ]

This patch fixes a memory leak, which happens if the connection request
is not fulfilled between parsing the DCCP options and handling the SYN
(because e.g. the backlog is full), because we forgot to free the
list of ack vectors.

Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp/tcp: fix routing redirect race

[ Upstream commit 45caeaa5ac0b4b11784ac6f932c0ad4c6b67cda0 ]

As Eric Dumazet pointed out this also needs to be fixed in IPv6.
v2: Contains the IPv6 tcp/Ipv6 dccp patches as well.

We have seen a few incidents lately where a dst_enty has been freed
with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that
dst_entry. If the conditions/timings are right a crash then ensues when the
freed dst_entry is referenced later on. A Common crashing back trace is:

 #8 [] page_fault at ffffffff8163e648
    [exception RIP: __tcp_ack_snd_check+74]
.
.
 #9 [] tcp_rcv_established at ffffffff81580b64
#10 [] tcp_v4_do_rcv at ffffffff8158b54a
#11 [] tcp_v4_rcv at ffffffff8158cd02
#12 [] ip_local_deliver_finish at ffffffff815668f4
#13 [] ip_local_deliver at ffffffff81566bd9
#14 [] ip_rcv_finish at ffffffff8156656d
#15 [] ip_rcv at ffffffff81566f06
#16 [] __netif_receive_skb_core at ffffffff8152b3a2
#17 [] __netif_receive_skb at ffffffff8152b608
#18 [] netif_receive_skb at ffffffff8152b690
#19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3]
#20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3]
#21 [] net_rx_action at ffffffff8152bac2
#22 [] __do_softirq at ffffffff81084b4f
#23 [] call_softirq at ffffffff8164845c
#24 [] do_softirq at ffffffff81016fc5
#25 [] irq_exit at ffffffff81084ee5
#26 [] do_IRQ at ffffffff81648ff8

Of course it may happen with other NIC drivers as well.

It's found the freed dst_entry here:

 224 static bool tcp_in_quickack_mode(struct sock *sk)↩
 225 {↩
 226 ▹       const struct inet_connection_sock *icsk = inet_csk(sk);↩
 227 ▹       const struct dst_entry *dst = __sk_dst_get(sk);↩
 228 ↩
 229 ▹       return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩
 230 ▹       ▹       (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩
 231 }↩

But there are other backtraces attributed to the same freed dst_entry in
netfilter code as well.

All the vmcores showed 2 significant clues:

- Remote hosts behind the default gateway had always been redirected to a
different gateway. A rtable/dst_entry will be added for that host. Making
more dst_entrys with lower reference counts. Making this more probable.

- All vmcores showed a postitive LockDroppedIcmps value, e.g:

LockDroppedIcmps                  267

A closer look at the tcp_v4_err() handler revealed that do_redirect() will run
regardless of whether user space has the socket locked. This can result in a
race condition where the same dst_entry cached in sk->sk_dst_entry can be
decremented twice for the same socket via:

do_redirect()->__sk_dst_check()-> dst_release().

Which leads to the dst_entry being prematurely freed with another socket
pointing to it via sk->sk_dst_cache and a subsequent crash.

To fix this skip do_redirect() if usespace has the socket locked. Instead let
the redirect take place later when user space does not have the socket
locked.

The dccp/IPv6 code is very similar in this respect, so fixing it there too.

As Eric Garver pointed out the following commit now invalidates routes. Which
can set the dst->obsolete flag so that ipv4_dst_check() returns null and
triggers the dst_release().

Fixes: ceb3320610d6 ("ipv4: Kill routes during PMTU/redirect updates.")
Cc: Eric Garver <egarver@redhat.com>
Cc: Hannes Sowa <hsowa@redhat.com>
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: drop netfilter fake rtable unconditionally

[ Upstream commit a13b2082ece95247779b9995c4e91b4246bed023 ]

Andreas reports kernel oops during rmmod of the br_netfilter module.
Hannes debugged the oops down to a NULL rt6info->rt6i_indev.

Problem is that br_netfilter has the nasty concept of adding a fake
rtable to skb->dst; this happens in a br_netfilter prerouting hook.

A second hook (in bridge LOCAL_IN) is supposed to remove these again
before the skb is handed up the stack.

However, on module unload hooks get unregistered which means an
skb could traverse the prerouting hook that attaches the fake_rtable,
while the 'fake rtable remove' hook gets removed from the hooklist
immediately after.

Fixes: 34666d467cbf1e2e3c7 ("netfilter: bridge: move br_netfilter out of the core")
Reported-by: Andreas Karis <akaris@redhat.com>
Debugged-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: avoid write to a possibly cloned skb

[ Upstream commit 79e49503efe53a8c51d8b695bedc8a346c5e4a87 ]

ip6_fragment, in case skb has a fraglist, checks if the
skb is cloned.  If it is, it will move to the 'slow path' and allocates
new skbs for each fragment.

However, right before entering the slowpath loop, it updates the
nexthdr value of the last ipv6 extension header to NEXTHDR_FRAGMENT,
to account for the fragment header that will be inserted in the new
ipv6-fragment skbs.

In case original skb is cloned this munges nexthdr value of another
skb.  Avoid this by doing the nexthdr update for each of the new fragment
skbs separately.

This was observed with tcpdump on a bridge device where netfilter ipv6
reassembly is active:  tcpdump shows malformed fragment headers as
the l4 header (icmpv6, tcp, etc). is decoded as a fragment header.

Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reported-by: Andreas Karis <akaris@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: make ECMP route replacement less greedy

[ Upstream commit 67e194007be08d071294456274dd53e0a04fdf90 ]

Commit 27596472473a ("ipv6: fix ECMP route replacement") introduced a
loop that removes all siblings of an ECMP route that is being
replaced. However, this loop doesn't stop when it has replaced
siblings, and keeps removing other routes with a higher metric.
We also end up triggering the WARN_ON after the loop, because after
this nsiblings < 0.

Instead, stop the loop when we have taken care of all routes with the
same metric as the route being replaced.

  Reproducer:
  ===========
    #!/bin/sh

    ip netns add ns1
    ip netns add ns2
    ip -net ns1 link set lo up

    for x in 0 1 2 ; do
        ip link add veth$x netns ns2 type veth peer name eth$x netns ns1
        ip -net ns1 link set eth$x up
        ip -net ns2 link set veth$x up
    done

    ip -net ns1 -6 r a 2000::/64 nexthop via fe80::0 dev eth0 \
            nexthop via fe80::1 dev eth1 nexthop via fe80::2 dev eth2
    ip -net ns1 -6 r a 2000::/64 via fe80::42 dev eth0 metric 256
    ip -net ns1 -6 r a 2000::/64 via fe80::43 dev eth0 metric 2048

    echo "before replace, 3 routes"
    ip -net ns1 -6 r | grep -v '^fe80\|^ff00'
    echo

    ip -net ns1 -6 r c 2000::/64 nexthop via fe80::4 dev eth0 \
            nexthop via fe80::5 dev eth1 nexthop via fe80::6 dev eth2

    echo "after replace, only 2 routes, metric 2048 is gone"
    ip -net ns1 -6 r | grep -v '^fe80\|^ff00'

Fixes: 27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mpls: Send route delete notifications when router module is unloaded

[ Upstream commit e37791ec1ad785b59022ae211f63a16189bacebf ]

When the mpls_router module is unloaded, mpls routes are deleted but
notifications are not sent to userspace leaving userspace caches
out of sync. Add the call to mpls_notify_route in mpls_net_exit as
routes are freed.

Fixes: 0189197f44160 ("mpls: Basic routing support")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

act_connmark: avoid crashing on malformed nlattrs with null parms

[ Upstream commit 52491c7607c5527138095edf44c53169dc1ddb82 ]

tcf_connmark_init does not check in its configuration if TCA_CONNMARK_PARMS
is set, resulting in a null pointer dereference when trying to access it.

[501099.043007] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
[501099.043039] IP: [<ffffffffc10c60fb>] tcf_connmark_init+0x8b/0x180 [act_connmark]
...
[501099.044334] Call Trace:
[501099.044345]  [<ffffffffa47270e8>] ? tcf_action_init_1+0x198/0x1b0
[501099.044363]  [<ffffffffa47271b0>] ? tcf_action_init+0xb0/0x120
[501099.044380]  [<ffffffffa47250a4>] ? tcf_exts_validate+0xc4/0x110
[501099.044398]  [<ffffffffc0f5fa97>] ? u32_set_parms+0xa7/0x270 [cls_u32]
[501099.044417]  [<ffffffffc0f60bf0>] ? u32_change+0x680/0x87b [cls_u32]
[501099.044436]  [<ffffffffa4725d1d>] ? tc_ctl_tfilter+0x4dd/0x8a0
[501099.044454]  [<ffffffffa44a23a1>] ? security_capable+0x41/0x60
[501099.044471]  [<ffffffffa470ca01>] ? rtnetlink_rcv_msg+0xe1/0x220
[501099.044490]  [<ffffffffa470c920>] ? rtnl_newlink+0x870/0x870
[501099.044507]  [<ffffffffa472cc61>] ? netlink_rcv_skb+0xa1/0xc0
[501099.044524]  [<ffffffffa47073f4>] ? rtnetlink_rcv+0x24/0x30
[501099.044541]  [<ffffffffa472c634>] ? netlink_unicast+0x184/0x230
[501099.044558]  [<ffffffffa472c9d8>] ? netlink_sendmsg+0x2f8/0x3b0
[501099.044576]  [<ffffffffa46d8880>] ? sock_sendmsg+0x30/0x40
[501099.044592]  [<ffffffffa46d8e03>] ? SYSC_sendto+0xd3/0x150
[501099.044608]  [<ffffffffa425fda1>] ? __do_page_fault+0x2d1/0x510
[501099.044626]  [<ffffffffa47fbd7b>] ? system_call_fast_compare_end+0xc/0x9b

Fixes: 22a5dc0e5e3e ("net: sched: Introduce connmark action")
Signed-off-by: Étienne Noss <etienne.noss@wifirst.fr>
Signed-off-by: Victorien Molle <victorien.molle@wifirst.fr>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uapi: fix linux/packet_diag.h userspace compilation error

[ Upstream commit 745cb7f8a5de0805cade3de3991b7a95317c7c73 ]

Replace MAX_ADDR_LEN with its numeric value to fix the following
linux/packet_diag.h userspace compilation error:

/usr/include/linux/packet_diag.h:67:17: error: 'MAX_ADDR_LEN' undeclared here (not in a function)
  __u8 pdmc_addr[MAX_ADDR_LEN];

This is not the first case in the UAPI where the numeric value
of MAX_ADDR_LEN is used instead of symbolic one, uapi/linux/if_link.h
already does the same:

$ grep MAX_ADDR_LEN include/uapi/linux/if_link.h
__u8 mac[32]; /* MAX_ADDR_LEN */

There are no UAPI headers besides these two that use MAX_ADDR_LEN.

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vrf: Fix use-after-free in vrf_xmit

[ Upstream commit f7887d40e541f74402df0684a1463c0a0bb68c68 ]

KASAN detected a use-after-free:

[  269.467067] BUG: KASAN: use-after-free in vrf_xmit+0x7f1/0x827 [vrf] at addr ffff8800350a21c0
[  269.467067] Read of size 4 by task ssh/1879
[  269.467067] CPU: 1 PID: 1879 Comm: ssh Not tainted 4.10.0+ #249
[  269.467067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[  269.467067] Call Trace:
[  269.467067]  dump_stack+0x81/0xb6
[  269.467067]  kasan_object_err+0x21/0x78
[  269.467067]  kasan_report+0x2f7/0x450
[  269.467067]  ? vrf_xmit+0x7f1/0x827 [vrf]
[  269.467067]  ? ip_output+0xa4/0xdb
[  269.467067]  __asan_load4+0x6b/0x6d
[  269.467067]  vrf_xmit+0x7f1/0x827 [vrf]
...

Which corresponds to the skb access after xmit handling. Fix by saving
skb->len and using the saved value to update stats.

Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: fix use-after-free in dccp_feat_activate_values

[ Upstream commit 62f8f4d9066c1c6f2474845d1ca7e2891f2ae3fd ]

Dmitry reported crashes in DCCP stack [1]

Problem here is that when I got rid of listener spinlock, I missed the
fact that DCCP stores a complex state in struct dccp_request_sock,
while TCP does not.

Since multiple cpus could access it at the same time, we need to add
protection.

[1]
BUG: KASAN: use-after-free in dccp_feat_activate_values+0x967/0xab0
net/dccp/feat.c:1541 at addr ffff88003713be68
Read of size 8 by task syz-executor2/8457
CPU: 2 PID: 8457 Comm: syz-executor2 Not tainted 4.10.0-rc7+ #127
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:15 [inline]
 dump_stack+0x292/0x398 lib/dump_stack.c:51
 kasan_object_err+0x1c/0x70 mm/kasan/report.c:162
 print_address_description mm/kasan/report.c:200 [inline]
 kasan_report_error mm/kasan/report.c:289 [inline]
 kasan_report.part.1+0x20e/0x4e0 mm/kasan/report.c:311
 kasan_report mm/kasan/report.c:332 [inline]
 __asan_report_load8_noabort+0x29/0x30 mm/kasan/report.c:332
 dccp_feat_activate_values+0x967/0xab0 net/dccp/feat.c:1541
 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121
 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457
 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186
 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711
 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
 dst_input include/net/dst.h:507 [inline]
 ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
 process_backlog+0xe5/0x6c0 net/core/dev.c:4839
 napi_poll net/core/dev.c:5202 [inline]
 net_rx_action+0xe70/0x1900 net/core/dev.c:5267
 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284
 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902
 </IRQ>
 do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328
 do_softirq kernel/softirq.c:176 [inline]
 __local_bh_enable_ip+0x1f2/0x200 kernel/softirq.c:181
 local_bh_enable include/linux/bottom_half.h:31 [inline]
 rcu_read_unlock_bh include/linux/rcupdate.h:971 [inline]
 ip6_finish_output2+0xbb0/0x23d0 net/ipv6/ip6_output.c:123
 ip6_finish_output+0x302/0x960 net/ipv6/ip6_output.c:148
 NF_HOOK_COND include/linux/netfilter.h:246 [inline]
 ip6_output+0x1cb/0x8d0 net/ipv6/ip6_output.c:162
 ip6_xmit+0xcdf/0x20d0 include/net/dst.h:501
 inet6_csk_xmit+0x320/0x5f0 net/ipv6/inet6_connection_sock.c:179
 dccp_transmit_skb+0xb09/0x1120 net/dccp/output.c:141
 dccp_xmit_packet+0x215/0x760 net/dccp/output.c:280
 dccp_write_xmit+0x168/0x1d0 net/dccp/output.c:362
 dccp_sendmsg+0x79c/0xb10 net/dccp/proto.c:796
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
 sock_sendmsg_nosec net/socket.c:635 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:645
 SYSC_sendto+0x660/0x810 net/socket.c:1687
 SyS_sendto+0x40/0x50 net/socket.c:1655
 entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x4458b9
RSP: 002b:00007f8ceb77bb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 00000000004458b9
RDX: 0000000000000023 RSI: 0000000020e60000 RDI: 0000000000000017
RBP: 00000000006e1b90 R08: 00000000200f9fe1 R09: 0000000000000020
R10: 0000000000008010 R11: 0000000000000282 R12: 00000000007080a8
R13: 0000000000000000 R14: 00007f8ceb77c9c0 R15: 00007f8ceb77c700
Object at ffff88003713be50, in cache kmalloc-64 size: 64
Allocated:
PID = 8446
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
 save_stack+0x43/0xd0 mm/kasan/kasan.c:502
 set_track mm/kasan/kasan.c:514 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605
 kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2738
 kmalloc include/linux/slab.h:490 [inline]
 dccp_feat_entry_new+0x214/0x410 net/dccp/feat.c:467
 dccp_feat_push_change+0x38/0x220 net/dccp/feat.c:487
 __feat_register_sp+0x223/0x2f0 net/dccp/feat.c:741
 dccp_feat_propagate_ccid+0x22b/0x2b0 net/dccp/feat.c:949
 dccp_feat_server_ccid_dependencies+0x1b3/0x250 net/dccp/feat.c:1012
 dccp_make_response+0x1f1/0xc90 net/dccp/output.c:423
 dccp_v6_send_response+0x4ec/0xc20 net/dccp/ipv6.c:217
 dccp_v6_conn_request+0xaba/0x11b0 net/dccp/ipv6.c:377
 dccp_rcv_state_process+0x51e/0x1650 net/dccp/input.c:606
 dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632
 sk_backlog_rcv include/net/sock.h:893 [inline]
 __sk_receive_skb+0x36f/0xcc0 net/core/sock.c:479
 dccp_v6_rcv+0xba5/0x1d00 net/dccp/ipv6.c:742
 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
 dst_input include/net/dst.h:507 [inline]
 ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
 process_backlog+0xe5/0x6c0 net/core/dev.c:4839
 napi_poll net/core/dev.c:5202 [inline]
 net_rx_action+0xe70/0x1900 net/core/dev.c:5267
 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284
Freed:
PID = 15
 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
 save_stack+0x43/0xd0 mm/kasan/kasan.c:502
 set_track mm/kasan/kasan.c:514 [inline]
 kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578
 slab_free_hook mm/slub.c:1355 [inline]
 slab_free_freelist_hook mm/slub.c:1377 [inline]
 slab_free mm/slub.c:2954 [inline]
 kfree+0xe8/0x2b0 mm/slub.c:3874
 dccp_feat_entry_destructor.part.4+0x48/0x60 net/dccp/feat.c:418
 dccp_feat_entry_destructor net/dccp/feat.c:416 [inline]
 dccp_feat_list_pop net/dccp/feat.c:541 [inline]
 dccp_feat_activate_values+0x57f/0xab0 net/dccp/feat.c:1543
 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121
 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457
 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186
 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711
 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
 dst_input include/net/dst.h:507 [inline]
 ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:257 [inline]
 ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
 process_backlog+0xe5/0x6c0 net/core/dev.c:4839
 napi_poll net/core/dev.c:5202 [inline]
 net_rx_action+0xe70/0x1900 net/core/dev.c:5267
 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284
Memory state around the buggy address:
 ffff88003713bd00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88003713bd80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88003713be00: fc fc fc fc fc fc fc fc fc fc fb fb fb fb fb fb
                                                          ^

Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix socket refcounting in skb_complete_tx_timestamp()

[ Upstream commit 9ac25fc063751379cb77434fef9f3b088cd3e2f7 ]

TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt
By the time TX completion happens, sk_refcnt might be already 0.

sock_hold()/sock_put() would then corrupt critical state, like
sk_wmem_alloc and lead to leaks or use after free.

Fixes: 62bccb8cdb69 ("net-timestamp: Make the clone operation stand-alone from phy timestamping")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix socket refcounting in skb_complete_wifi_ack()

[ Upstream commit dd4f10722aeb10f4f582948839f066bebe44e5fb ]

TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt
By the time TX completion happens, sk_refcnt might be already 0.

sock_hold()/sock_put() would then corrupt critical state, like
sk_wmem_alloc.

Fixes: bf7fa551e0ce ("mac80211: Resolve sk_refcnt/sk_wmem_alloc issue in wifi ack path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix various issues for sockets morphing to listen state

[ Upstream commit 02b2faaf0af1d85585f6d6980e286d53612acfc2 ]

Dmitry Vyukov reported a divide by 0 triggered by syzkaller, exploiting
tcp_disconnect() path that was never really considered and/or used
before syzkaller ;)

I was not able to reproduce the bug, but it seems issues here are the
three possible actions that assumed they would never trigger on a
listener.

1) tcp_write_timer_handler
2) tcp_delack_timer_handler
3) MTU reduction

Only IPv6 MTU reduction was properly testing TCP_CLOSE and TCP_LISTEN
 states from tcp_v6_mtu_reduced()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: Unlock sock before calling sk_free()

[ Upstream commit d5afb6f9b6bb2c57bd0c05e76e12489dc0d037d9 ]

The code where sk_clone() came from created a new socket and locked it,
but then, on the error path didn't unlock it.

This problem stayed there for a long while, till b0691c8ee7c2 ("net:
Unlock sock before calling sk_free()") fixed it, but unfortunately the
callers of sk_clone() (now sk_clone_locked()) were not audited and the
one in dccp_create_openreq_child() remained.

Now in the age of the syskaller fuzzer, this was finally uncovered, as
reported by Dmitry:

 ---- 8< ----

I've got the following report while running syzkaller fuzzer on
86292b33d4b7 ("Merge branch 'akpm' (patches from Andrew)")

  [ BUG: held lock freed! ]
  4.10.0+ #234 Not tainted
  -------------------------
  syz-executor6/6898 is freeing memory
  ffff88006286cac0-ffff88006286d3b7, with a lock still held there!
   (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock
  include/linux/spinlock.h:299 [inline]
   (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>]
  sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504
  5 locks held by syz-executor6/6898:
   #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] lock_sock
  include/net/sock.h:1460 [inline]
   #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>]
  inet_stream_connect+0x44/0xa0 net/ipv4/af_inet.c:681
   #1:  (rcu_read_lock){......}, at: [<ffffffff83bc1c2a>]
  inet6_csk_xmit+0x12a/0x5d0 net/ipv6/inet6_connection_sock.c:126
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_unlink
  include/linux/skbuff.h:1767 [inline]
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_dequeue
  include/linux/skbuff.h:1783 [inline]
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>]
  process_backlog+0x264/0x730 net/core/dev.c:4835
   #3:  (rcu_read_lock){......}, at: [<ffffffff83aeb5c0>]
  ip6_input_finish+0x0/0x1700 net/ipv6/ip6_input.c:59
   #4:  (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock
  include/linux/spinlock.h:299 [inline]
   #4:  (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>]
  sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504

Fix it just like was done by b0691c8ee7c2 ("net: Unlock sock before calling
sk_free()").

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170301153510.GE15145@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: net_enable_timestamp() can be called from irq contexts

[ Upstream commit 13baa00ad01bb3a9f893e3a08cbc2d072fc0c15d ]

It is now very clear that silly TCP listeners might play with
enabling/disabling timestamping while new children are added
to their accept queue.

Meaning net_enable_timestamp() can be called from BH context
while current state of the static key is not enabled.

Lets play safe and allow all contexts.

The work queue is scheduled only under the problematic cases,
which are the static key enable/disable transition, to not slow down
critical paths.

This extends and improves what we did in commit 5fa8bbda38c6 ("net: use
a work queue to defer net_disable_timestamp() work")

Fixes: b90e5794c5bd ("net: dont call jump_label_dec from irq context")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: don't call strlen() on the user buffer in packet_bind_spkt()

[ Upstream commit 540e2894f7905538740aaf122bd8e0548e1c34a4 ]

KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of
uninitialized memory in packet_bind_spkt():
Acked-by: Eric Dumazet <edumazet@google.com>
==================================================================
BUG: KMSAN: use of unitialized memory
CPU: 0 PID: 1074 Comm: packet Not tainted 4.8.0-rc6+ #1891
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
 0000000000000000 ffff88006b6dfc08 ffffffff82559ae8 ffff88006b6dfb48
 ffffffff818a7c91 ffffffff85b9c870 0000000000000092 ffffffff85b9c550
 0000000000000000 0000000000000092 00000000ec400911 0000000000000002
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff82559ae8>] dump_stack+0x238/0x290 lib/dump_stack.c:51
 [<ffffffff818a6626>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1003
 [<ffffffff818a783b>] __msan_warning+0x5b/0xb0
mm/kmsan/kmsan_instr.c:424
 [<     inline     >] strlen lib/string.c:484
 [<ffffffff8259b58d>] strlcpy+0x9d/0x200 lib/string.c:144
 [<ffffffff84b2eca4>] packet_bind_spkt+0x144/0x230
net/packet/af_packet.c:3132
 [<ffffffff84242e4d>] SYSC_bind+0x40d/0x5f0 net/socket.c:1370
 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f
arch/x86/entry/entry_64.o:?
chained origin: 00000000eba00911
 [<ffffffff810bb787>] save_stack_trace+0x27/0x50
arch/x86/kernel/stacktrace.c:67
 [<     inline     >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322
 [<     inline     >] kmsan_save_stack mm/kmsan/kmsan.c:334
 [<ffffffff818a59f8>] kmsan_internal_chain_origin+0x118/0x1e0
mm/kmsan/kmsan.c:527
 [<ffffffff818a7773>] __msan_set_alloca_origin4+0xc3/0x130
mm/kmsan/kmsan_instr.c:380
 [<ffffffff84242b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356
 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f
arch/x86/entry/entry_64.o:?
origin description: ----address@SYSC_bind (origin=00000000eb400911)
==================================================================
(the line numbers are relative to 4.8-rc6, but the bug persists
upstream)

, when I run the following program as root:

=====================================
 #include <string.h>
 #include <sys/socket.h>
 #include <netpacket/packet.h>
 #include <net/ethernet.h>

 int main() {
   struct sockaddr addr;
   memset(&addr, 0xff, sizeof(addr));
   addr.sa_family = AF_PACKET;
   int fd = socket(PF_PACKET, SOCK_PACKET, htons(ETH_P_ALL));
   bind(fd, &addr, sizeof(addr));
   return 0;
 }
=====================================

This happens because addr.sa_data copied from the userspace is not
zero-terminated, and copying it with strlcpy() in packet_bind_spkt()
results in calling strlen() on the kernel copy of that non-terminated
buffer.

Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv

[ Upstream commit 51fb60eb162ab84c5edf2ae9c63cf0b878e5547e ]

l2tp_ip_backlog_recv may not return -1 if the packet gets dropped.
The return value is passed up to ip_local_deliver_finish, which treats
negative values as an IP protocol number for resubmission.

Signed-off-by: Paul Hüber <phueber@kernsp.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: mask tos for input route

[ Upstream commit 6e28099d38c0e50d62c1afc054e37e573adf3d21 ]

Restore the lost masking of TOS in input route code to
allow ip rules to match it properly.

Problem [1] noticed by Shmulik Ladkani <shmulik.ladkani@gmail.com>

[1] http://marc.info/?t=137331755300040&r=1&w=2

Fixes: 89aef8921bfb ("ipv4: Delete routing cache.")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vti6: return GRE_KEY for vti6

[ Upstream commit 7dcdf941cdc96692ab99fd790c8cc68945514851 ]

Align vti6 with vti by returning GRE_KEY flag. This enables iproute2
to display tunnel keys on "ip -6 tunnel show"

Signed-off-by: David Forster <dforster@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vxlan: correctly validate VXLAN ID against VXLAN_N_VID

[ Upstream commit 4e37d6911f36545b286d15073f6f2222f840e81c ]

The incorrect check caused an off-by-one error: the maximum VID 0xffffff
was unusable.

Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: remove mmapped netlink support

commit d1b4c689d4130bcfd3532680b64db562300716b6 upstream.

mmapped netlink has a number of unresolved issues:

- TX zerocopy support had to be disabled more than a year ago via
  commit 4682a0358639b29cf ("netlink: Always copy on mmap TX.")
  because the content of the mmapped area can change after netlink
  attribute validation but before message processing.

- RX support was implemented mainly to speed up nfqueue dumping packet
  payload to userspace.  However, since commit ae08ce0021087a5d812d2
  ("netfilter: nfnetlink_queue: zero copy support") we avoid one copy
  with the socket-based interface too (via the skb_zerocopy helper).

The other problem is that skbs attached to mmaped netlink socket
behave different from normal skbs:

- they don't have a shinfo area, so all functions that use skb_shinfo()
(e.g. skb_clone) cannot be used.

- reserving headroom prevents userspace from seeing the content as
it expects message to start at skb->head.
See for instance
commit aa3a022094fa ("netlink: not trim skb for mmaped socket when dump").

- skbs handed e.g. to netlink_ack must have non-NULL skb->sk, else we
crash because it needs the sk to check if a tx ring is attached.

Also not obvious, leads to non-intuitive bug fixes such as 7c7bdf359
("netfilter: nfnetlink: use original skbuff when acking batches").

mmaped netlink also didn't play nicely with the skb_zerocopy helper
used by nfqueue and openvswitch.  Daniel Borkmann fixed this via
commit 6bb0fef489f6 ("netlink, mmap: fix edge-case leakages in nf queue
zero-copy")' but at the cost of also needing to provide remaining
length to the allocation function.

nfqueue also has problems when used with mmaped rx netlink:
- mmaped netlink doesn't allow use of nfqueue batch verdict messages.
  Problem is that in the mmap case, the allocation time also determines
  the ordering in which the frame will be seen by userspace (A
  allocating before B means that A is located in earlier ring slot,
  but this also means that B might get a lower sequence number then A
  since seqno is decided later.  To fix this we would need to extend the
  spinlocked region to also cover the allocation and message setup which
  isn't desirable.
- nfqueue can now be configured to queue large (GSO) skbs to userspace.
  Queing GSO packets is faster than having to force a software segmentation
  in the kernel, so this is a desirable option.  However, with a mmap based
  ring one has to use 64kb per ring slot element, else mmap has to fall back
  to the socket path (NL_MMAP_STATUS_COPY) for all large packets.

To use the mmap interface, userspace not only has to probe for mmap netlink
support, it also has to implement a recv/socket receive path in order to
handle messages that exceed the size of an rx ring element.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ken-ichirou MATSUZAWA <chamaken@gmail.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Shi Yuejie <shiyuejie@outlook.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>