OSDN Git Service
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:59:02 +0000 (16:59 -0300)]
sctp: allow unsetting sockopt MAXSEG
RFC 6458 Section 8.1.16 says that setting MAXSEG as 0 means that the user
is not limiting it, and not that it should set to the *current* maximum,
as we are doing.
This patch thus allow setting it as 0, effectively removing the user
limit.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:59:01 +0000 (16:59 -0300)]
sctp: consider idata chunks when setting SCTP_MAXSEG
When setting SCTP_MAXSEG sock option, it should consider which kind of
data chunk is being used if the asoc is already available, so that the
limit better reflect reality.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:59:00 +0000 (16:59 -0300)]
sctp: honor PMTU_DISABLED when handling icmp
sctp_sendmsg() could trigger PMTU updates even when PMTU_DISABLED was
set, as pmtu_pending could be set unconditionally during icmp handling
if the socket was in use by the application.
This patch fixes it by checking for PMTU_DISABLED when handling such
deferred updates.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:58:59 +0000 (16:58 -0300)]
sctp: re-use sctp_transport_pmtu in sctp_transport_route
sctp_transport_route currently is very similar to sctp_transport_pmtu plus
a few other bits.
This patch reuses sctp_transport_pmtu in sctp_transport_route and removes
the duplicated code.
Also, as all calls to sctp_transport_route were forcing the dst release
before calling it, let's just include such release too.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:58:58 +0000 (16:58 -0300)]
sctp: remove sctp_transport_pmtu_check
We are now keeping the MTU information synced between asoc, transport
and dst, which makes the check at sctp_packet_config() not needed
anymore. As it was the sole caller to this function, lets remove it.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:58:57 +0000 (16:58 -0300)]
sctp: introduce sctp_dst_mtu
Which makes sure that the MTU respects the minimum value of
SCTP_DEFAULT_MINSEGMENT and that it is correctly aligned.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:58:56 +0000 (16:58 -0300)]
sctp: remove sctp_assoc_pending_pmtu
No need for this helper.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:58:55 +0000 (16:58 -0300)]
sctp: introduce sctp_assoc_update_frag_point
and avoid the open-coded versions of it.
Now sctp_datamsg_from_user can just re-use asoc->frag_point as it will
always be updated.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:58:54 +0000 (16:58 -0300)]
sctp: introduce sctp_mtu_payload
When given a MTU, this function calculates how much payload we can carry
on it. Without a MTU, it calculates the amount of header overhead we
have.
So that when we have extra overhead, like the one added for IP options
on SELinux patches, it is easier to handle it.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:58:53 +0000 (16:58 -0300)]
sctp: introduce sctp_assoc_set_pmtu
All changes to asoc PMTU should now go through this wrapper, making it
easier to track them and to do other actions upon it.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:58:52 +0000 (16:58 -0300)]
sctp: remove an if() that is always true
As noticed by Xin Long, the if() here is always true as PMTU can never
be 0.
Reported-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:58:51 +0000 (16:58 -0300)]
sctp: move transport pathmtu calc away of sctp_assoc_add_peer
There was only one case that sctp_assoc_add_peer couldn't handle, which
is when SPP_PMTUD_DISABLE is set and pathmtu not initialized.
So add this situation to sctp_transport_route and reuse what was
already in there.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 26 Apr 2018 19:58:50 +0000 (16:58 -0300)]
sctp: remove old and unused SCTP_MIN_PMTU
This value is not used anywhere in the code. In essence it is a
duplicate of SCTP_DEFAULT_MINSEGMENT, which is used by the stack.
SCTP_MIN_PMTU value makes more sense, but we should not change to it now
as it would risk breaking applications.
So this patch removes SCTP_MIN_PMTU and adjust the comment above it.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Thu, 26 Apr 2018 17:41:02 +0000 (19:41 +0200)]
selftests: pmtu: Minimum MTU for vti6 is 68
A vti6 interface can carry IPv4 packets too.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Thu, 26 Apr 2018 16:58:10 +0000 (09:58 -0700)]
tcp: remove mss check in tcp_select_initial_window()
In tcp_select_initial_window(), we only set rcv_wnd to
tcp_default_init_rwnd() if current mss > (1 << wscale). Otherwise,
rcv_wnd is kept at the full receive space of the socket which is a
value way larger than tcp_default_init_rwnd().
With larger initial rcv_wnd value, receive buffer autotuning logic
takes longer to kick in and increase the receive buffer.
In a TCP throughput test where receiver has rmem[2] set to 125MB
(wscale is 11), we see the connection gets recvbuf limited at the
beginning of the connection and gets less throughput overall.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 27 Apr 2018 18:02:53 +0000 (14:02 -0400)]
Merge branch 'smc-next'
Ursula Braun says:
====================
smc fixes from 2018-04-17 - v3
in the mean time we challenged the benefit of these CLC handshake
optimizations for the sockopts TCP_NODELAY and TCP_CORK.
We decided to give up on them for now, since SMC still works
properly without.
There is now version 3 of the patch series with patches 2-4 implementing
sockopts that require special handling in SMC.
Version 3 changes
* no deferring of setsockopts TCP_NODELAY and TCP_CORK anymore
* allow fallback for some sockopts eliminating SMC usage
* when setting TCP_NODELAY always enforce data transmission
(not only together with corked data)
Version 2 changes of Patch 2/4 (and 3/4):
* return error -EOPNOTSUPP for TCP_FASTOPEN sockopts
* fix a kernel_setsockopt() usage bug by switching parameter
variable from type "u8" to "int"
* add return code validation when calling kernel_setsockopt()
* propagate a setsockopt error on the internal CLC socket
to the SMC socket.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 26 Apr 2018 15:18:23 +0000 (17:18 +0200)]
net/smc: handle sockopt TCP_DEFER_ACCEPT
If sockopt TCP_DEFER_ACCEPT is set, the accept is delayed till
data is available.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 26 Apr 2018 15:18:22 +0000 (17:18 +0200)]
net/smc: sockopts TCP_NODELAY and TCP_CORK
Setting sockopt TCP_NODELAY or resetting sockopt TCP_CORK
triggers data transfer.
For a corked SMC socket RDMA writes are deferred, if there is
still sufficient send buffer space available.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 26 Apr 2018 15:18:21 +0000 (17:18 +0200)]
net/smc: handle sockopts forcing fallback
Several TCP sockopts do not work for SMC. One example are the
TCP_FASTOPEN sockopts, since SMC-connection setup is based on the TCP
three-way-handshake.
If the SMC socket is still in state SMC_INIT, such sockopts trigger
fallback to TCP. Otherwise an error is returned.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karsten Graul [Thu, 26 Apr 2018 15:18:20 +0000 (17:18 +0200)]
net/smc: fix structure size
The struct smc_cdc_msg must be defined as packed so the
size is 44 bytes.
And change the structure size check so sizeof is checked.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher [Thu, 26 Apr 2018 15:08:09 +0000 (08:08 -0700)]
net: intel: Cleanup the copyright/license headers
After many years of having a ~30 line copyright and license header to our
source files, we are finally able to reduce that to one line with the
advent of the SPDX identifier.
Also caught a few files missing the SPDX license identifier, so fixed
them up.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Thu, 26 Apr 2018 12:18:38 +0000 (15:18 +0300)]
net: Fix coccinelle warning
kbuild test robot says:
>coccinelle warnings: (new ones prefixed by >>)
>>> net/core/dev.c:1588:2-3: Unneeded semicolon
So, let's remove it.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Regnery [Thu, 26 Apr 2018 10:36:36 +0000 (12:36 +0200)]
geneve: fix build with modular IPV6
Commit
c40e89fd358e ("geneve: configure MTU based on a lower device") added
an IS_ENABLED(CONFIG_IPV6) to geneve, leading to the following link error
with CONFIG_GENEVE=y and CONFIG_IPV6=m:
drivers/net/geneve.o: In function `geneve_link_config':
geneve.c:(.text+0x14c): undefined reference to `rt6_lookup'
Fix this by adding a Kconfig dependency and forcing GENEVE to be a module
when IPV6 is a module.
Fixes:
c40e89fd358e ("geneve: configure MTU based on a lower device")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 27 Apr 2018 17:38:50 +0000 (13:38 -0400)]
Merge branch 's390-next'
Julian Wiedmann says:
====================
s390/net: updates 2018-04-26
please apply the following patches to net-next. There's the usual
cleanups & small improvements, and Kittipon adds HW offload support
for IPv6 checksumming.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 26 Apr 2018 07:42:24 +0000 (09:42 +0200)]
s390/qeth: improve fallback to random MAC address
If READ MAC fails to fetch a valid MAC address, allow some more device
types (IQD and z/VM OSD) to fall back to a random address.
Also use eth_hw_addr_random(), for indicating to userspace that the
address type is NET_ADDR_RANDOM.
Note that while z/VM has various protection schemes to prohibit
custom addresses on its NICs, they are all optional. So we should at
least give it a try.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kittipon Meesompop [Thu, 26 Apr 2018 07:42:23 +0000 (09:42 +0200)]
s390/qeth: add IPv6 RX checksum offload support
Check if a qeth device supports IPv6 RX checksum offload, and hook it up
into the existing NETIF_F_RXCSUM support.
As NETIF_F_RXCSUM is now backed by a combination of HW Assists, we need
to be a little smarter when dealing with errors during a configuration
change:
- switching on NETIF_F_RXCSUM only makes sense if at least one HW Assist
was enabled successfully.
- for switching off NETIF_F_RXCSUM, all available HW Assists need to be
deactivated.
Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kittipon Meesompop [Thu, 26 Apr 2018 07:42:22 +0000 (09:42 +0200)]
s390/qeth: add IPv6 TX checksum offload support
Check if a qeth device supports IPv6 TX checksum offload, and advertise
NETIF_F_IPV6_CSUM accordingly. Add support for setting the relevant bits
in IPv6 packet descriptors.
Currently this has only limited use (ie. UDP, or Jumbo Frames). For any
TCP traffic with a standard MSS, the TCP checksum gets calculated
as part of the linear GSO segmentation.
Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kittipon Meesompop [Thu, 26 Apr 2018 07:42:21 +0000 (09:42 +0200)]
s390/qeth: extend Checksum Offload Assists for IPv6
Add some wrappers to make the protocol-specific Assist code a little
more generic, and use them for sending protocol-agnostic commands in
the Checksum Offload Assist code.
Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kittipon Meesompop [Thu, 26 Apr 2018 07:42:20 +0000 (09:42 +0200)]
s390/qeth: query IPv6 assists during hardsetup
For new functionality, the L2 subdriver will start using IPv6 assists.
So move the query from the L3 subdriver into the common setup path.
Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kittipon Meesompop [Thu, 26 Apr 2018 07:42:19 +0000 (09:42 +0200)]
s390/qeth: add stats counter for RX csum offload
This matches the statistics we gather for the TX offload path.
Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 26 Apr 2018 07:42:18 +0000 (09:42 +0200)]
s390/qeth: disregard IPv4 header for RX csum offload
The kernel does its own validation of the IPv4 header checksum,
drivers/HW are not required to handle this.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 26 Apr 2018 07:42:17 +0000 (09:42 +0200)]
s390/qeth: extract csum offload helpers
This consolidates the checksum offload code that was duplicated
over the two qeth subdrivers.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kittipon Meesompop [Thu, 26 Apr 2018 07:42:16 +0000 (09:42 +0200)]
s390/qeth: de-indent else after return
Trivial cleanup, in preparation for a subsequent patch.
Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 26 Apr 2018 07:42:15 +0000 (09:42 +0200)]
s390/net: set HW port number in netdevice
struct net_device contains a dev_port field. Store the OSA port number
in this field.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 26 Apr 2018 07:42:14 +0000 (09:42 +0200)]
s390/qeth: don't worry about IPs on VLAN removal
When removing a VLAN ID on a L3 device, the driver currently attempts to
walk and unregister the VLAN device's IP addresses.
This can be safely removed - before qeth_l3_vlan_rx_kill_vid() even gets
called, we receive an inet[6]addr event for each IP on the device and
qeth_l3_handle_ip_event() unregisters the address accordingly.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 26 Apr 2018 07:42:13 +0000 (09:42 +0200)]
s390/qeth: convert vlan spinlock to mutex
As the vid_list is only accessed from process context, there's no need to
protect it with a spinlock.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Thu, 26 Apr 2018 07:42:12 +0000 (09:42 +0200)]
s390/qeth: skip QDIO queue handler indirection
Both qeth sub drivers use the same QDIO queue handlers, there's no need
to expose them via the driver's discipline. No functional change.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Thu, 26 Apr 2018 03:07:05 +0000 (11:07 +0800)]
bridge: use hlist_entry_safe
Use hlist_entry_safe() instead of open-coding it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 27 Apr 2018 17:19:39 +0000 (13:19 -0400)]
Merge branch 'liquidio-add-support-for-ndo_get_stats64'
Pradeep Nalla says:
====================
liquidio: add support for ndo_get_stats64
Support ndo_get_stats64 instead of ndo_get_stats. Also add stats for
multicast and broadcast packets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pradeep Nalla [Thu, 26 Apr 2018 00:00:22 +0000 (17:00 -0700)]
liquidio: add support for ndo_get_stats64 instead of ndo_get_stats
Support ndo_get_stats64 instead of ndo_get_stats. Also add stats for
multicast and broadcast packets.
Signed-off-by: Pradeep Nalla <pradeep.nalla@cavium.com>
Acked-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pradeep Nalla [Thu, 26 Apr 2018 00:00:12 +0000 (17:00 -0700)]
liquidio: move a couple of functions to lio_core.c
To support the next patch in this series which has code that calls
octnet_get_link_stats from two different .c files, move that function (and
its dependency octnet_nic_stats_callback) to lio_core.c. Remove
octnet_get_link_stats's static declaration and add its function prototype
in octeon_network.h.
Signed-off-by: Pradeep Nalla <pradeep.nalla@cavium.com>
Acked-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 27 Apr 2018 17:11:25 +0000 (13:11 -0400)]
phy: Temporary build fix after phylib changes.
Make PHYLIB boolean, because we reference phylib provided symbols now
from net/core/ethtool.c and therefore 'm' doesn't work.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 27 Apr 2018 15:53:04 +0000 (11:53 -0400)]
Merge branch 'net-Extend-availability-of-PHY-statistics'
Florian Fainelli says:
====================
net: Extend availability of PHY statistics
This patch series adds support for retrieving PHY statistics with DSA switches
when the CPU port uses a PHY to PHY connection (as opposed to MAC to MAC).
To get there a number of things are done:
- first we move the code dealing with PHY statistics outside of net/core/ethtool.c
and create helper functions since the same code will be reused
- then we allow network device drivers to provide an ethtool_get_phy_stats callback
when the standard PHY library helpers are not suitable
- we update the DSA functions dealing with ethtool operations to get passed a
stringset instead of assuming ETH_SS_STATS like they currently do
- then we provide a set of standard helpers within DSA as a framework and add
the plumbing to allow retrieving the PHY statistics of the CPU port(s)
- finally plug support for retrieving such PHY statistics with the b53 driver
Changes in v3:
- retrict the b53 change to 539x and 531x5 series of switches
- added a change to dsa_loop.c to help test the feature
Changes in v2:
- got actual testing when the DSA master network device has a PHY that
already provides statistics (thanks Nikita!)
- fixed the kbuild error reported when CONFIG_PHYLIB=n
- removed the checking of ops which is redundant and not needed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 25 Apr 2018 19:12:54 +0000 (12:12 -0700)]
net: dsa: loop: Hook PHY statistics
We just return the same statistics through ethtool_get_stats() and
ethtool_get_phy_stats() for simplicity since this is just a mock-up driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 25 Apr 2018 19:12:53 +0000 (12:12 -0700)]
net: dsa: b53: Add support for reading PHY statistics
Allow the b53 driver to return PHY statistics when the CPU port used is
different than 5, 7 or 8, because those are typically PHY-less on most
devices. This is useful for debugging link problems between the switch
and an external host when using a non standard CPU port number (e.g: 4).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 25 Apr 2018 19:12:52 +0000 (12:12 -0700)]
net: dsa: Allow providing PHY statistics from CPU port
Implement the same type of ethtool diversion that we have for
ETH_SS_STATS and make it work with ETH_SS_PHY_STATS. This allows
providing PHY level statistics for CPU ports that are directly
connecting to a PHY device.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 25 Apr 2018 19:12:51 +0000 (12:12 -0700)]
net: dsa: Add helper function to obtain PHY device of a given port
In preparation for having more call sites attempting to obtain a
reference against a PHY device corresponding to a particular port,
introduce a helper function for that purpose.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 25 Apr 2018 19:12:50 +0000 (12:12 -0700)]
net: dsa: Pass stringset to ethtool operations
Up until now we largely assumed that we were interested in ETH_SS_STATS
type of strings for all ethtool operations, this is about to change with
the introduction of additional string sets, e.g: ETH_SS_PHY_STATS.
Update all functions to take an appropriate stringset argument and act
on it when it is different than ETH_SS_STATS for now.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 25 Apr 2018 19:12:49 +0000 (12:12 -0700)]
net: dsa: Do not check for ethtool_ops validity
This is completely redundant with what netdev_set_default_ethtool_ops()
does, we are always guaranteed to have a valid dev->ethtool_ops pointer,
however, within that structure, not all function calls may be populated,
so we still have to check them individually.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 25 Apr 2018 19:12:48 +0000 (12:12 -0700)]
net: Allow network devices to have PHY statistics
Add a new callback: get_ethtool_phy_stats() which allows network device
drivers not making use of the PHY library to return PHY statistics.
Update ethtool_get_phy_stats(), __ethtool_get_sset_count() and
__ethtool_get_strings() accordingly to interogate the network device
about ETH_SS_PHY_STATS.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 25 Apr 2018 19:12:47 +0000 (12:12 -0700)]
net: Move PHY statistics code into PHY library helpers
In order to make it possible for network device drivers that do not
necessarily have a phy_device attached, but still report PHY statistics,
have a preliminary refactoring consisting in creating helper functions
that encapsulate the PHY device driver knowledge within PHYLIB.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Wed, 25 Apr 2018 17:54:14 +0000 (19:54 +0200)]
l2tp: consistent reference counting in procfs and debufs
The 'pppol2tp' procfs and 'l2tp/tunnels' debugfs files handle reference
counting of sessions differently than for tunnels.
For consistency, use the same mechanism for handling both sessions and
tunnels. That is, drop the reference on the previous session just
before looking up the next one (rather than in .show()). If necessary
(if dump stops before *_next_session() returns NULL), drop the last
reference in .stop().
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Wed, 25 Apr 2018 17:29:36 +0000 (19:29 +0200)]
tipc: introduce ioctl for fetching node identity
After the introduction of a 128-bit node identity it may be difficult
for a user to correlate between this identity and the generated node
hash address.
We now try to make this easier by introducing a new ioctl() call for
fetching a node identity by using the hash value as key. This will
be particularly useful when we extend some of the commands in the
'tipc' tool, but we also expect regular user applications to need
this feature.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 27 Apr 2018 01:19:50 +0000 (21:19 -0400)]
Merge git://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-04-27
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add extensive BPF helper description into include/uapi/linux/bpf.h
and a new script bpf_helpers_doc.py which allows for generating a
man page out of it. Thus, every helper in BPF now comes with proper
function signature, detailed description and return code explanation,
from Quentin.
2) Migrate the BPF collect metadata tunnel tests from BPF samples over
to the BPF selftests and further extend them with v6 vxlan, geneve
and ipip tests, simplify the ipip tests, improve documentation and
convert to bpf_ntoh*() / bpf_hton*() api, from William.
3) Currently, helpers that expect ARG_PTR_TO_MAP_{KEY,VALUE} can only
access stack and packet memory. Extend this to allow such helpers
to also use map values, which enabled use cases where value from
a first lookup can be directly used as a key for a second lookup,
from Paul.
4) Add a new helper bpf_skb_get_xfrm_state() for tc BPF programs in
order to retrieve XFRM state information containing SPI, peer
address and reqid values, from Eyal.
5) Various optimizations in nfp driver's BPF JIT in order to turn ADD
and SUB instructions with negative immediate into the opposite
operation with a positive immediate such that nfp can better fit
small immediates into instructions. Savings in instruction count
up to 4% have been observed, from Jakub.
6) Add the BPF prog's gpl_compatible flag to struct bpf_prog_info
and add support for dumping this through bpftool, from Jiri.
7) Move the BPF sockmap samples over into BPF selftests instead since
sockmap was rather a series of tests than sample anyway and this way
this can be run from automated bots, from John.
8) Follow-up fix for bpf_adjust_tail() helper in order to make it work
with generic XDP, from Nikita.
9) Some follow-up cleanups to BTF, namely, removing unused defines from
BTF uapi header and renaming 'name' struct btf_* members into name_off
to make it more clear they are offsets into string section, from Martin.
10) Remove test_sock_addr from TEST_GEN_PROGS in BPF selftests since
not run directly but invoked from test_sock_addr.sh, from Yonghong.
11) Remove redundant ret assignment in sample BPF loader, from Wang.
12) Add couple of missing files to BPF selftest's gitignore, from Anders.
There are two trivial merge conflicts while pulling:
1) Remove samples/sockmap/Makefile since all sockmap tests have been
moved to selftests.
2) Add both hunks from tools/testing/selftests/bpf/.gitignore to the
file since git should ignore all of them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Sheng-Hui [Wed, 25 Apr 2018 02:07:13 +0000 (10:07 +0800)]
samples, bpf: remove redundant ret assignment in bpf_load_program()
2 redundant ret assignments removed:
* 'ret = 1' before the logic 'if (data_maps)', and if any errors jump to
label 'done'. No 'ret = 1' needed before the error jump.
* After the '/* load programs */' part, if everything goes well, then
the BPF code will be loaded and 'ret' set to 0 by load_and_attach().
If something goes wrong, 'ret' set to none-O, the redundant 'ret = 0'
after the for clause will make the error skipped.
For example, if some BPF code cannot provide supported program types
in ELF SEC("unknown"), the for clause will not call load_and_attach()
to load the BPF code. 1 should be returned to callees instead of 0.
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann [Thu, 26 Apr 2018 22:22:00 +0000 (00:22 +0200)]
Merge branch 'bpf-uapi-helper-doc'
Quentin Monnet says:
====================
eBPF helper functions can be called from within eBPF programs to perform
a variety of tasks that would be otherwise hard or impossible to do with
eBPF itself. There is a growing number of such helper functions in the
kernel, but documentation is scarce. The main user space header file
does contain a short commented description of most helpers, but it is
somewhat outdated and not complete. It is more a "cheat sheet" than a
real documentation accessible to new eBPF developers.
This commit attempts to improve the situation by replacing the existing
overview for the helpers with a more developed description. Furthermore,
a Python script is added to generate a manual page for eBPF helpers. The
workflow is the following, and requires the rst2man utility:
$ ./scripts/bpf_helpers_doc.py \
--filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
$ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
$ man /tmp/bpf-helpers.7
The objective is to keep all documentation related to the helpers in a
single place, and to be able to generate from here a manual page that
could be packaged in the man-pages repository and shipped with most
distributions.
Additionally, parsing the prototypes of the helper functions could
hopefully be reused, with a different Printer object, to generate
header files needed in some eBPF-related projects.
Regarding the description of each helper, it comprises several items:
- The function prototype.
- A description of the function and of its arguments (except for a
couple of cases, when there are no arguments and the return value
makes the function usage really obvious).
- A description of return values (if not void).
Additional items such as the list of compatible eBPF program and map
types for each helper, Linux kernel version that introduced the helper,
GPL-only restriction, and commit hash could be added in the future, but
it was decided on the mailing list to leave them aside for now.
For several helpers, descriptions are inspired (at times, nearly copied)
from the commit logs introducing them in the kernel--Many thanks to
their respective authors! Some sentences were also adapted from comments
from the reviews, thanks to the reviewers as well. Descriptions were
completed as much as possible, the objective being to have something easily
accessible even for people just starting with eBPF. There is probably a bit
more work to do in this direction for some helpers.
Some RST formatting is used in the descriptions (not in function
prototypes, to keep them readable, but the Python script provided in
order to generate the RST for the manual page does add formatting to
prototypes, to produce something pretty) to get "bold" and "italics" in
manual pages. Hopefully, the descriptions in bpf.h file remains
perfectly readable. Note that the few trailing white spaces are
intentional, removing them would break paragraphs for rst2man.
The descriptions should ideally be updated each time someone adds a new
helper, or updates the behaviour (new socket option supported, ...) or
the interface (new flags available, ...) of existing ones.
To ease the review process, the documentation has been split into several
patches.
v3 -> v4:
- Add a patch (#9) for newly added BPF helpers.
- Add a patch (#10) to update UAPI bpf.h version under tools/.
- Use SPDX tag in Python script.
- Several fixes on man page header and footer, and helpers documentation.
Please refer to individual patches for details.
RFC v2 -> PATCH v3:
Several fixes on man page header and footer, and helpers documentation.
Please refer to individual patches for details.
RFC v1 -> RFC v2:
- Remove "For" (compatible program and map types), "Since" (minimal
Linux kernel version required), "GPL only" sections and commit hashes
for the helpers.
- Add comment on top of the description list to explain how this
documentation is supposed to be processed.
- Update Python script accordingly (remove the same sections, and remove
paragraphs on program types and GPL restrictions from man page
header).
- Split series into several patches.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: linux-doc@vger.kernel.org
Cc: linux-man@vger.kernel.org
Quentin Monnet [Wed, 25 Apr 2018 17:17:01 +0000 (18:17 +0100)]
bpf: update bpf.h uapi header for tools
Update tools/include/uapi/linux/bpf.h file in order to reflect the
changes for BPF helper functions documentation introduced in previous
commits.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Quentin Monnet [Wed, 25 Apr 2018 17:17:00 +0000 (18:17 +0100)]
bpf: add documentation for eBPF helpers (65-66)
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions:
Helper from Nikita:
- bpf_xdp_adjust_tail()
Helper from Eyal:
- bpf_skb_get_xfrm_state()
v4:
- New patch (helpers did not exist yet for previous versions).
Cc: Nikita V. Shirokov <tehnerd@tehnerd.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Quentin Monnet [Wed, 25 Apr 2018 17:16:59 +0000 (18:16 +0100)]
bpf: add documentation for eBPF helpers (58-64)
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions, all
written by John:
- bpf_redirect_map()
- bpf_sk_redirect_map()
- bpf_sock_map_update()
- bpf_msg_redirect_map()
- bpf_msg_apply_bytes()
- bpf_msg_cork_bytes()
- bpf_msg_pull_data()
v4:
- bpf_redirect_map(): Fix typos: "XDP_ABORT" changed to "XDP_ABORTED",
"his" to "this". Also add a paragraph on performance improvement over
bpf_redirect() helper.
v3:
- bpf_sk_redirect_map(): Improve description of BPF_F_INGRESS flag.
- bpf_msg_redirect_map(): Improve description of BPF_F_INGRESS flag.
- bpf_redirect_map(): Fix note on CPU redirection, not fully implemented
for generic XDP but supported on native XDP.
- bpf_msg_pull_data(): Clarify comment about invalidated verifier
checks.
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Quentin Monnet [Wed, 25 Apr 2018 17:16:58 +0000 (18:16 +0100)]
bpf: add documentation for eBPF helpers (51-57)
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions:
Helpers from Lawrence:
- bpf_setsockopt()
- bpf_getsockopt()
- bpf_sock_ops_cb_flags_set()
Helpers from Yonghong:
- bpf_perf_event_read_value()
- bpf_perf_prog_read_value()
Helper from Josef:
- bpf_override_return()
Helper from Andrey:
- bpf_bind()
v4:
- bpf_perf_event_read_value(): State that this helper should be
preferred over bpf_perf_event_read().
v3:
- bpf_perf_event_read_value(): Fix time of selection for perf event type
in description. Remove occurences of "cores" to avoid confusion with
"CPU".
- bpf_bind(): Remove last paragraph of description, which was off topic.
Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
[for bpf_perf_event_read_value(), bpf_perf_prog_read_value()]
Acked-by: Andrey Ignatov <rdna@fb.com>
[for bpf_bind()]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Quentin Monnet [Wed, 25 Apr 2018 17:16:57 +0000 (18:16 +0100)]
bpf: add documentation for eBPF helpers (42-50)
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions:
Helper from Kaixu:
- bpf_perf_event_read()
Helpers from Martin:
- bpf_skb_under_cgroup()
- bpf_xdp_adjust_head()
Helpers from Sargun:
- bpf_probe_write_user()
- bpf_current_task_under_cgroup()
Helper from Thomas:
- bpf_skb_change_head()
Helper from Gianluca:
- bpf_probe_read_str()
Helpers from Chenbo:
- bpf_get_socket_cookie()
- bpf_get_socket_uid()
v4:
- bpf_perf_event_read(): State that bpf_perf_event_read_value() should
be preferred over this helper.
- bpf_skb_change_head(): Clarify comment about invalidated verifier
checks.
- bpf_xdp_adjust_head(): Clarify comment about invalidated verifier
checks.
- bpf_probe_write_user(): Add that dst must be a valid user space
address.
- bpf_get_socket_cookie(): Improve description by making clearer that
the cockie belongs to the socket, and state that it remains stable for
the life of the socket.
v3:
- bpf_perf_event_read(): Fix time of selection for perf event type in
description. Remove occurences of "cores" to avoid confusion with
"CPU".
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: Chenbo Feng <fengc@google.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
[for bpf_skb_under_cgroup(), bpf_xdp_adjust_head()]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Quentin Monnet [Wed, 25 Apr 2018 17:16:56 +0000 (18:16 +0100)]
bpf: add documentation for eBPF helpers (33-41)
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions, all
written by Daniel:
- bpf_get_hash_recalc()
- bpf_skb_change_tail()
- bpf_skb_pull_data()
- bpf_csum_update()
- bpf_set_hash_invalid()
- bpf_get_numa_node_id()
- bpf_set_hash()
- bpf_skb_adjust_room()
- bpf_xdp_adjust_meta()
v4:
- bpf_skb_change_tail(): Clarify comment about invalidated verifier
checks.
- bpf_skb_pull_data(): Clarify the motivation for using this helper or
bpf_skb_load_bytes(), on non-linear buffers. Fix RST formatting for
*skb*. Clarify comment about invalidated verifier checks.
- bpf_csum_update(): Fix description of checksum (entire packet, not IP
checksum). Fix a typo: "header" instead of "helper".
- bpf_set_hash_invalid(): Mention bpf_get_hash_recalc().
- bpf_get_numa_node_id(): State that the helper is not restricted to
programs attached to sockets.
- bpf_skb_adjust_room(): Clarify comment about invalidated verifier
checks.
- bpf_xdp_adjust_meta(): Clarify comment about invalidated verifier
checks.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Quentin Monnet [Wed, 25 Apr 2018 17:16:55 +0000 (18:16 +0100)]
bpf: add documentation for eBPF helpers (23-32)
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions, all
written by Daniel:
- bpf_get_prandom_u32()
- bpf_get_smp_processor_id()
- bpf_get_cgroup_classid()
- bpf_get_route_realm()
- bpf_skb_load_bytes()
- bpf_csum_diff()
- bpf_skb_get_tunnel_opt()
- bpf_skb_set_tunnel_opt()
- bpf_skb_change_proto()
- bpf_skb_change_type()
v4:
- bpf_get_prandom_u32(): Warn that the prng is not cryptographically
secure.
- bpf_get_smp_processor_id(): Fix a typo (case).
- bpf_get_cgroup_classid(): Clarify description. Add notes on the helper
being limited to cgroup v1, and to egress path.
- bpf_get_route_realm(): Add comparison with bpf_get_cgroup_classid().
Add a note about usage with TC and advantage of clsact. Fix a typo in
return value ("sdb" instead of "skb").
- bpf_skb_load_bytes(): Make explicit loading large data loads it to the
eBPF stack.
- bpf_csum_diff(): Add a note on seed that can be cascaded. Link to
bpf_l3|l4_csum_replace().
- bpf_skb_get_tunnel_opt(): Add a note about usage with "collect
metadata" mode, and example of this with Geneve.
- bpf_skb_set_tunnel_opt(): Add a link to bpf_skb_get_tunnel_opt()
description.
- bpf_skb_change_proto(): Mention that the main use case is NAT64.
Clarify comment about invalidated verifier checks.
v3:
- bpf_get_prandom_u32(): Fix helper name :(. Add description, including
a note on the internal random state.
- bpf_get_smp_processor_id(): Add description, including a note on the
processor id remaining stable during program run.
- bpf_get_cgroup_classid(): State that CONFIG_CGROUP_NET_CLASSID is
required to use the helper. Add a reference to related documentation.
State that placing a task in net_cls controller disables cgroup-bpf.
- bpf_get_route_realm(): State that CONFIG_CGROUP_NET_CLASSID is
required to use this helper.
- bpf_skb_load_bytes(): Fix comment on current use cases for the helper.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Quentin Monnet [Wed, 25 Apr 2018 17:16:54 +0000 (18:16 +0100)]
bpf: add documentation for eBPF helpers (12-22)
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions, all
written by Alexei:
- bpf_get_current_pid_tgid()
- bpf_get_current_uid_gid()
- bpf_get_current_comm()
- bpf_skb_vlan_push()
- bpf_skb_vlan_pop()
- bpf_skb_get_tunnel_key()
- bpf_skb_set_tunnel_key()
- bpf_redirect()
- bpf_perf_event_output()
- bpf_get_stackid()
- bpf_get_current_task()
v4:
- bpf_redirect(): Fix typo: "XDP_ABORT" changed to "XDP_ABORTED". Add
note on bpf_redirect_map() providing better performance. Replace "Save
for" with "Except for".
- bpf_skb_vlan_push(): Clarify comment about invalidated verifier
checks.
- bpf_skb_vlan_pop(): Clarify comment about invalidated verifier
checks.
- bpf_skb_get_tunnel_key(): Add notes on tunnel_id, "collect metadata"
mode, and example tunneling protocols with which it can be used.
- bpf_skb_set_tunnel_key(): Add a reference to the description of
bpf_skb_get_tunnel_key().
- bpf_perf_event_output(): Specify that, and for what purpose, the
helper can be used with programs attached to TC and XDP.
v3:
- bpf_skb_get_tunnel_key(): Change and improve description and example.
- bpf_redirect(): Improve description of BPF_F_INGRESS flag.
- bpf_perf_event_output(): Fix first sentence of description. Delete
wrong statement on context being evaluated as a struct pt_reg. Remove
the long yet incomplete example.
- bpf_get_stackid(): Add a note about PERF_MAX_STACK_DEPTH being
configurable.
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Quentin Monnet [Wed, 25 Apr 2018 17:16:53 +0000 (18:16 +0100)]
bpf: add documentation for eBPF helpers (01-11)
Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.
The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.
This patch contains descriptions for the following helper functions, all
written by Alexei:
- bpf_map_lookup_elem()
- bpf_map_update_elem()
- bpf_map_delete_elem()
- bpf_probe_read()
- bpf_ktime_get_ns()
- bpf_trace_printk()
- bpf_skb_store_bytes()
- bpf_l3_csum_replace()
- bpf_l4_csum_replace()
- bpf_tail_call()
- bpf_clone_redirect()
v4:
- bpf_map_lookup_elem(): Add "const" qualifier for key.
- bpf_map_update_elem(): Add "const" qualifier for key and value.
- bpf_map_lookup_elem(): Add "const" qualifier for key.
- bpf_skb_store_bytes(): Clarify comment about invalidated verifier
checks.
- bpf_l3_csum_replace(): Mention L3 instead of just IP, and add a note
about bpf_csum_diff().
- bpf_l4_csum_replace(): Mention L4 instead of just TCP/UDP, and add a
note about bpf_csum_diff().
- bpf_tail_call(): Bring minor edits to description.
- bpf_clone_redirect(): Add a note about the relation with
bpf_redirect(). Also clarify comment about invalidated verifier
checks.
v3:
- bpf_map_lookup_elem(): Fix description of restrictions for flags
related to the existence of the entry.
- bpf_trace_printk(): State that trace_pipe can be configured. Fix
return value in case an unknown format specifier is met. Add a note on
kernel log notice when the helper is used. Edit example.
- bpf_tail_call(): Improve comment on stack inheritance.
- bpf_clone_redirect(): Improve description of BPF_F_INGRESS flag.
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Quentin Monnet [Wed, 25 Apr 2018 17:16:52 +0000 (18:16 +0100)]
bpf: add script and prepare bpf.h for new helpers documentation
Remove previous "overview" of eBPF helpers from user bpf.h header.
Replace it by a comment explaining how to process the new documentation
(to come in following patches) with a Python script to produce RST, then
man page documentation.
Also add the aforementioned Python script under scripts/. It is used to
process include/uapi/linux/bpf.h and to extract helper descriptions, to
turn it into a RST document that can further be processed with rst2man
to produce a man page. The script takes one "--filename <path/to/file>"
option. If the script is launched from scripts/ in the kernel root
directory, it should be able to find the location of the header to
parse, and "--filename <path/to/file>" is then optional. If it cannot
find the file, then the option becomes mandatory. RST-formatted
documentation is printed to standard output.
Typical workflow for producing the final man page would be:
$ ./scripts/bpf_helpers_doc.py \
--filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
$ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
$ man /tmp/bpf-helpers.7
Note that the tool kernel-doc cannot be used to document eBPF helpers,
whose signatures are not available directly in the header files
(pre-processor directives are used to produce them at the beginning of
the compilation process).
v4:
- Also remove overviews for newly added bpf_xdp_adjust_tail() and
bpf_skb_get_xfrm_state().
- Remove vague statement about what helpers are restricted to GPL
programs in "LICENSE" section for man page footer.
- Replace license boilerplate with SPDX tag for Python script.
v3:
- Change license for man page.
- Remove "for safety reasons" from man page header text.
- Change "packets metadata" to "packets" in man page header text.
- Move and fix comment on helpers introducing no overhead.
- Remove "NOTES" section from man page footer.
- Add "LICENSE" section to man page footer.
- Edit description of file include/uapi/linux/bpf.h in man page footer.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann [Thu, 26 Apr 2018 22:11:15 +0000 (00:11 +0200)]
Merge branch 'bpf-tunnel-metadata-selftests'
William Tu says:
====================
The patch series provide end-to-end eBPF tunnel testsute. A common topology
is created below for all types of tunnels:
Topology:
---------
root namespace | at_ns0 namespace
|
----------- | -----------
| tnl dev | | | tnl dev | (overlay network)
----------- | -----------
metadata-mode | native-mode
with bpf |
|
---------- | ----------
| veth1 | --------- | veth0 | (underlay network)
---------- peer ----------
Device Configuration
--------------------
Root namespace with metadata-mode tunnel + BPF
Device names and addresses:
veth1 IP: 172.16.1.200, IPv6: 00::22 (underlay)
tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200 (overlay)
Namespace at_ns0 with native tunnel
Device names and addresses:
veth0 IPv4: 172.16.1.100, IPv6: 00::11 (underlay)
tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100 (overlay)
End-to-end ping packet flow
---------------------------
Most of the tests start by namespace creation, device configuration,
then ping the underlay and overlay network. When doing 'ping 10.1.1.100'
from root namespace, the following operations happen:
1) Route lookup shows 10.1.1.100/24 belongs to tnl dev, fwd to tnl dev.
2) Tnl device's egress BPF program is triggered and set the tunnel metadata,
with remote_ip=172.16.1.200 and others.
3) Outer tunnel header is prepended and route the packet to veth1's egress
4) veth0's ingress queue receive the tunneled packet at namespace at_ns0
5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet
6) Forward the packet to the overlay tnl dev
Test Cases
-----------------------------
Tunnel Type | BPF Programs
-----------------------------
GRE: gre_set_tunnel, gre_get_tunnel
IP6GRE: ip6gretap_set_tunnel, ip6gretap_get_tunnel
ERSPAN: erspan_set_tunnel, erspan_get_tunnel
IP6ERSPAN: ip4ip6erspan_set_tunnel, ip4ip6erspan_get_tunnel
VXLAN: vxlan_set_tunnel, vxlan_get_tunnel
IP6VXLAN: ip6vxlan_set_tunnel, ip6vxlan_get_tunnel
GENEVE: geneve_set_tunnel, geneve_get_tunnel
IP6GENEVE: ip6geneve_set_tunnel, ip6geneve_get_tunnel
IPIP: ipip_set_tunnel, ipip_get_tunnel
IP6IP: ipip6_set_tunnel, ipip6_get_tunnel,
ip6ip6_set_tunnel, ip6ip6_get_tunnel
XFRM: xfrm_get_state
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
William Tu [Thu, 26 Apr 2018 21:01:40 +0000 (14:01 -0700)]
samples/bpf: remove the bpf tunnel testsuite.
Move the testsuite to
selftests/bpf/{test_tunnel_kern.c, test_tunnel.sh}
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
William Tu [Thu, 26 Apr 2018 21:01:39 +0000 (14:01 -0700)]
selftests/bpf: bpf tunnel test.
The patch migrates the original tests at samples/bpf/tcbpf2_kern.c
and samples/bpf/test_tunnel_bpf.sh to selftests. There are a couple
changes from the original:
1) add ipv6 vxlan, ipv6 geneve, ipv6 ipip tests
2) simplify the original ipip tests (remove iperf tests)
3) improve documentation
4) use bpf_ntoh* and bpf_hton* api
In summary, 'test_tunnel_kern.o' contains the following bpf program:
GRE: gre_set_tunnel, gre_get_tunnel
IP6GRE: ip6gretap_set_tunnel, ip6gretap_get_tunnel
ERSPAN: erspan_set_tunnel, erspan_get_tunnel
IP6ERSPAN: ip4ip6erspan_set_tunnel, ip4ip6erspan_get_tunnel
VXLAN: vxlan_set_tunnel, vxlan_get_tunnel
IP6VXLAN: ip6vxlan_set_tunnel, ip6vxlan_get_tunnel
GENEVE: geneve_set_tunnel, geneve_get_tunnel
IP6GENEVE: ip6geneve_set_tunnel, ip6geneve_get_tunnel
IPIP: ipip_set_tunnel, ipip_get_tunnel
IP6IP: ipip6_set_tunnel, ipip6_get_tunnel,
ip6ip6_set_tunnel, ip6ip6_get_tunnel
XFRM: xfrm_get_state
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Nikita V. Shirokov [Wed, 25 Apr 2018 14:15:03 +0000 (07:15 -0700)]
bpf: fix xdp_generic for bpf_adjust_tail usecase
When bpf_adjust_tail was introduced for generic xdp, it changed skb's tail
pointer, so it was pointing to the new "end of the packet". However skb's
len field wasn't properly modified, so on the wire ethernet frame had
original (or even bigger, if adjust_head was used) size. This diff is
fixing this.
Fixes:
198d83bb3 (" bpf: make generic xdp compatible w/ bpf_xdp_adjust_tail")
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jiri Olsa [Thu, 26 Apr 2018 08:18:01 +0000 (10:18 +0200)]
tools, bpftool: Display license GPL compatible in prog show/list
Display the license "gpl" string in bpftool prog command, like:
# bpftool prog list
5: tracepoint name func tag
57cd311f2e27366b gpl
loaded_at Apr 26/09:37 uid 0
xlated 16B not jited memlock 4096B
# bpftool --json --pretty prog show
[{
"id": 5,
"type": "tracepoint",
"name": "func",
"tag": "
57cd311f2e27366b",
"gpl_compatible": true,
"loaded_at": "Apr 26/09:37",
"uid": 0,
"bytes_xlated": 16,
"jited": false,
"bytes_memlock": 4096
}
]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jiri Olsa [Wed, 25 Apr 2018 17:41:07 +0000 (19:41 +0200)]
tools, bpf: Sync bpf.h uapi header
Syncing the bpf.h uapi header with tools.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jiri Olsa [Wed, 25 Apr 2018 17:41:06 +0000 (19:41 +0200)]
bpf: Add gpl_compatible flag to struct bpf_prog_info
Adding gpl_compatible flag to struct bpf_prog_info
so it can be dumped via bpf_prog_get_info_by_fd and
displayed via bpftool progs dump.
Alexei noticed 4-byte hole in struct bpf_prog_info,
so we put the u32 flags field in there, and we can
keep adding bit fields in there without breaking
user space.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David S. Miller [Thu, 26 Apr 2018 19:10:06 +0000 (15:10 -0400)]
Merge branch 'udp-gso'
Willem de Bruijn says:
====================
udp gso
Segmentation offload reduces cycles/byte for large packets by
amortizing the cost of protocol stack traversal.
This patchset implements GSO for UDP. A process can concatenate and
submit multiple datagrams to the same destination in one send call
by setting socket option SOL_UDP/UDP_SEGMENT with the segment size,
or passing an analogous cmsg at send time.
The stack will send the entire large (up to network layer max size)
datagram through the protocol layer. At the GSO layer, it is broken
up in individual segments. All receive the same network layer header
and UDP src and dst port. All but the last segment have the same UDP
header, but the last may differ in length and checksum.
Initial results show a significant reduction in UDP cycles/byte.
See the main patch for more details and benchmark results.
udp
876 MB/s 14873 msg/s 624666 calls/s
11,205,777,429 cycles
udp gso
2139 MB/s 36282 msg/s 36282 calls/s
11,204,374,561 cycles
The patch set is broken down as follows:
- patch 1 is a prerequisite: code rearrangement, noop otherwise
- patch 2 implements the gso logic
- patch 3 adds protocol stack support for UDP_SEGMENT
- patch 4,5,7 are refinements
- patch 6 adds the cmsg interface
- patch 8..11 are tests
This idea was presented previously at netconf 2017-2
http://vger.kernel.org/netconf2017_files/rx_hardening_and_udp_gso.pdf
Changes v1 -> v2
- Convert __udp_gso_segment to modify headers after skb_segment
- Split main patch into two, one for gso logic, one for UDP_SEGMENT
Changes RFC -> v1
- MSG_MORE:
fixed, by allowing checksum offload with corking if gso
- SKB_GSO_UDP_L4:
made independent from SKB_GSO_UDP
and removed skb_is_ufo() wrapper
- NETIF_F_GSO_UDP_L4:
add to netdev_features_string
and to netdev-features.txt
add BUILD_BUG_ON to match SKB_GSO_UDP_L4 value
- UDP_MAX_SEGMENTS:
introduce limit on number of segments per gso skb
to avoid extreme cases like IP_MAX_MTU/IPV4_MIN_MTU
- CHECKSUM_PARTIAL:
test against missing feature after ndo_features_check
if not supported return error, analogous to udp_send_check
- MSG_ZEROCOPY: removed, deferred for now
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 26 Apr 2018 17:42:25 +0000 (13:42 -0400)]
selftests: udp gso benchmark
Send udp data between a source and sink, optionally with udp gso.
The two processes are expected to be run on separate hosts.
A script is included that runs them together over loopback in a
single namespace for functionality testing.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 26 Apr 2018 17:42:24 +0000 (13:42 -0400)]
selftests: udp gso with corking
Corked sockets take a different path to construct a udp datagram than
the lockless fast path. Test this alternate path.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 26 Apr 2018 17:42:23 +0000 (13:42 -0400)]
selftests: udp gso with connected sockets
Connected sockets use path mtu instead of device mtu.
Test this path by inserting a route mtu that is lower than the device
mtu. Verify that the path mtu for the connection matches this lower
number, then run the same test as in the connectionless case.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 26 Apr 2018 17:42:22 +0000 (13:42 -0400)]
selftests: udp gso
Validate udp gso, including edge cases (such as min/max gso sizes).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 26 Apr 2018 17:42:21 +0000 (13:42 -0400)]
udp: add gso support to virtual devices
Virtual devices such as tunnels and bonding can handle large packets.
Only segment packets when reaching a physical or loopback device.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 26 Apr 2018 17:42:20 +0000 (13:42 -0400)]
udp: add gso segment cmsg
Allow specifying segment size in the send call.
The new control message performs the same function as socket option
UDP_SEGMENT while avoiding the extra system call.
[ Export udp_cmsg_send for ipv6. -DaveM ]
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 26 Apr 2018 17:42:19 +0000 (13:42 -0400)]
udp: paged allocation with gso
When sending large datagrams that are later segmented, store data in
page frags to avoid copying from linear in skb_segment.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 26 Apr 2018 17:42:18 +0000 (13:42 -0400)]
udp: better wmem accounting on gso
skb_segment by default transfers allocated wmem from the gso skb
to the tail of the segment list. This underreports real truesize
of the list, especially if the tail might be dropped.
Similar to tcp_gso_segment, update wmem_alloc with the aggregate
list truesize and make each segment responsible for its own
share by setting skb->destructor.
Clear gso_skb->destructor prior to calling skb_segment to skip
the default assignment to tail.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 26 Apr 2018 17:42:17 +0000 (13:42 -0400)]
udp: generate gso with UDP_SEGMENT
Support generic segmentation offload for udp datagrams. Callers can
concatenate and send at once the payload of multiple datagrams with
the same destination.
To set segment size, the caller sets socket option UDP_SEGMENT to the
length of each discrete payload. This value must be smaller than or
equal to the relevant MTU.
A follow-up patch adds cmsg UDP_SEGMENT to specify segment size on a
per send call basis.
Total byte length may then exceed MTU. If not an exact multiple of
segment size, the last segment will be shorter.
The implementation adds a gso_size field to the udp socket, ip(v6)
cmsg cookie and inet_cork structure to be able to set the value at
setsockopt or cmsg time and to work with both lockless and corked
paths.
Initial benchmark numbers show UDP GSO about as expensive as TCP GSO.
tcp tso
3197 MB/s 54232 msg/s 54232 calls/s
6,457,754,262 cycles
tcp gso
1765 MB/s 29939 msg/s 29939 calls/s
11,203,021,806 cycles
tcp without tso/gso *
739 MB/s 12548 msg/s 12548 calls/s
11,205,483,630 cycles
udp
876 MB/s 14873 msg/s 624666 calls/s
11,205,777,429 cycles
udp gso
2139 MB/s 36282 msg/s 36282 calls/s
11,204,374,561 cycles
[*] after reverting commit
0a6b2a1dc2a2
("tcp: switch to GSO being always on")
Measured total system cycles ('-a') for one core while pinning both
the network receive path and benchmark process to that core:
perf stat -a -C 12 -e cycles \
./udpgso_bench_tx -C 12 -4 -D "$DST" -l 4
Note the reduction in calls/s with GSO. Bytes per syscall drops
increases from 1470 to 61818.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 26 Apr 2018 17:42:16 +0000 (13:42 -0400)]
udp: add udp gso
Implement generic segmentation offload support for udp datagrams. A
follow-up patch adds support to the protocol stack to generate such
packets.
UDP GSO is not UFO. UFO fragments a single large datagram. GSO splits
a large payload into a number of discrete UDP datagrams.
The implementation adds a GSO type SKB_UDP_GSO_L4 to differentiate it
from UFO (SKB_UDP_GSO).
IPPROTO_UDPLITE is excluded, as that protocol has no gso handler
registered.
[ Export __udp_gso_segment for ipv6. -DaveM ]
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 26 Apr 2018 17:42:15 +0000 (13:42 -0400)]
udp: expose inet cork to udp
UDP segmentation offload needs access to inet_cork in the udp layer.
Pass the struct to ip(6)_make_skb instead of allocating it on the
stack in that function itself.
This patch is a noop otherwise.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 26 Apr 2018 03:04:22 +0000 (23:04 -0400)]
Merge git://git./linux/kernel/git/davem/net
Merging net into net-next to help the bpf folks avoid
some really ugly merge conflicts.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 26 Apr 2018 03:02:58 +0000 (23:02 -0400)]
Merge branch '1GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
1GbE Intel Wired LAN Driver Updates 2018-04-25
This series enables some ethtool and tc-flower filters to be offloaded
to igb-based network controllers. This is useful when the system
configuration wants to steer kinds of traffic to a specific hardware
queue for i210 devices only.
The first two patch in the series are bug fixes.
The basis of this series is to export the internal API used to
configure address filters, so they can be used by ethtool, and
extending the functionality so an source address can be handled.
Then, we enable the tc-flower offloading implementation to re-use the
same infrastructure as ethtool, and storing them in the per-adapter
"nfc" (Network Filter Config?) list. But for consistency, for
destructive access they are separated, i.e. an filter added by
tc-flower can only be removed by tc-flower, but ethtool can read them
all.
Only support for VLAN Prio, Source and Destination MAC Address, and
Ethertype is enabled for now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 26 Apr 2018 02:55:33 +0000 (22:55 -0400)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix to clear the percpu metadata_dst that could otherwise carry
stale ip_tunnel_info, from William.
2) Fix that reduces the number of passes in x64 JIT with regards to
dead code sanitation to avoid risk of prog rejection, from Gianluca.
3) Several fixes of sockmap programs, besides others, fixing a double
page_put() in error path, missing refcount hold for pinned sockmap,
adding required -target bpf for clang in sample Makefile, from John.
4) Fix to disable preemption in __BPF_PROG_RUN_ARRAY() paths, from Roman.
5) Fix tools/bpf/ Makefile with regards to a lex/yacc build error
seen on older gcc-5, from John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Wed, 25 Apr 2018 21:22:45 +0000 (14:22 -0700)]
bpf: fix for lex/yacc build error with gcc-5
Fix build error found with Ubuntu shipped gcc-5
~/git/bpf/tools/bpf$ make all
Auto-detecting system features:
... libbfd: [ OFF ]
... disassembler-four-args: [ OFF ]
CC bpf_jit_disasm.o
LINK bpf_jit_disasm
CC bpf_dbg.o
/home/john/git/bpf/tools/bpf/bpf_dbg.c: In function ‘cmd_load’:
/home/john/git/bpf/tools/bpf/bpf_dbg.c:1077:13: warning: ‘cont’ may be used uninitialized in this function [-Wmaybe-uninitialized]
} else if (matches(subcmd, "pcap") == 0) {
^
LINK bpf_dbg
CC bpf_asm.o
make: *** No rule to make target `bpf_exp.yacc.o', needed by `bpf_asm'. Stop.
Fixes:
5a8997f20715 ("tools: bpf: respect output directory during build")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David S. Miller [Wed, 25 Apr 2018 19:19:41 +0000 (15:19 -0400)]
Merge branch '10GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
10GbE Intel Wired LAN Driver Updates 2018-04-25
This series represents yet another phase of the macvlan cleanup Alex has
been working on.
The main goal of these changes is to make it so that we only support
offloading what we can actually offload and we don't break any existing
functionality. So for example we were claiming to advertise source mode
macvlan and we were doing nothing of the sort, so support for that has been
dropped.
The biggest change with this set is that broadcast/multicast replication is
no longer being supported in software. Alex dropped it as it leads to
scaling issues when a broadcast frame has to be replicated up to 64 times.
Beyond that this set goes through and optimized the time needed to bring up
and tear down the macvlan interfaces on ixgbe and provides a clean way for
us to disable the macvlan offload when needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dag Moxnes [Wed, 25 Apr 2018 11:22:01 +0000 (13:22 +0200)]
rds: ib: Fix missing call to rds_ib_dev_put in rds_ib_setup_qp
The function rds_ib_setup_qp is calling rds_ib_get_client_data and
should correspondingly call rds_ib_dev_put. This call was lost in
the non-error path with the introduction of error handling done in
commit
3b12f73a5c29 ("rds: ib: add error handle")
Signed-off-by: Dag Moxnes <dag.moxnes@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Wed, 25 Apr 2018 10:48:58 +0000 (12:48 +0200)]
net/smc: keep clcsock reference in smc_tcp_listen_work()
The internal CLC socket should exist till the SMC-socket is released.
Function tcp_listen_worker() releases the internal CLC socket of a
listen socket, if an smc_close_active() is called. This function
is called for the final release(), but it is called for shutdown
SHUT_RDWR as well. This opens a door for protection faults, if
socket calls using the internal CLC socket are called for a
shutdown listen socket.
With the changes of
commit
3d502067599f ("net/smc: simplify wait when closing listen socket")
there is no need anymore to release the internal CLC socket in
function tcp_listen_worker((). It is sufficient to release it in
smc_release().
Fixes:
127f49705823 ("net/smc: release clcsock from tcp_listen_worker")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Reported-by: syzbot+9045fc589fcd196ef522@syzkaller.appspotmail.com
Reported-by: syzbot+28a2c86cf19c81d871fa@syzkaller.appspotmail.com
Reported-by: syzbot+9605e6cace1b5efd4a0a@syzkaller.appspotmail.com
Reported-by: syzbot+cf9012c597c8379d535c@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 25 Apr 2018 10:43:07 +0000 (11:43 +0100)]
mkiss: remove redundant check for len > 0
The check for len > 0 is always true and hence is redundant as
this check is already being made to execute the code inside the
while-loop. Hence it is redundant and can be removed.
Cleans up cppcheck warning:
drivers/net/hamradio/mkiss.c:220: (warning) Identical inner 'if'
condition is always true.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 25 Apr 2018 10:31:13 +0000 (11:31 +0100)]
net: amd8111e: remove redundant duplicated if statement
There are two identical nested if statements, the second is redundant
and can be removed. Also clean up white space formatting.
Cleans up cppcheck warning:
drivers/net/ethernet/amd/amd8111e.c:1080: (warning) Identical inner 'if'
condition is always true.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 25 Apr 2018 09:46:47 +0000 (17:46 +0800)]
sctp: remove the unused sctp_assoc_is_match function
After Commit
4f0087812648 ("sctp: apply rhashtable api to send/recv
path"), there's no place using sctp_assoc_is_match, so remove it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinicius Costa Gomes [Tue, 10 Apr 2018 17:49:59 +0000 (10:49 -0700)]
igb: Add support for adding offloaded clsflower filters
This allows filters added by tc-flower and specifying MAC addresses,
Ethernet types, and the VLAN priority field, to be offloaded to the
controller.
This reuses most of the infrastructure used by ethtool, but clsflower
filters are kept in a separated list, so they are invisible to
ethtool.
To setup clsflower offloading:
$ tc qdisc replace dev eth0 handle 100: parent root mqprio \
num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 hw 0
(clsflower offloading depends on the netword driver to be configured
with multiple traffic classes, we use mqprio's 'num_tc' parameter to
set it to 3)
$ tc qdisc add dev eth0 ingress
Examples of filters:
$ tc filter add dev eth0 parent ffff: flower \
dst_mac aa:aa:aa:aa:aa:aa \
hw_tc 2 skip_sw
(just a simple filter filtering for the destination MAC address and
steering that traffic to queue 2)
$ tc filter add dev enp2s0 parent ffff: proto 0x22f0 flower \
src_mac cc:cc:cc:cc:cc:cc \
hw_tc 1 skip_sw
(as the i210 doesn't support steering traffic based on the source
address alone, we need to use another steering traffic, in this case
we are using the ethernet type (0x22f0) to steer traffic to queue 1)
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Wed, 25 Apr 2018 18:07:05 +0000 (14:07 -0400)]
Merge branch 'nfp-flower-tc-block-support-and-nfp-PCI-updates'
Jakub Kicinski says:
====================
nfp: flower tc block support and nfp PCI updates
This series improves the nfp PCIe code by making use of the new
pcie_print_link_status() helper and resetting NFP locks when
driver loads. This can help us avoid lock ups after host crashes
and is rebooted with PCIe reset or when kdump kernel is loaded.
The flower changes come from John, he says:
This patchset fixes offload issues when multiple repr netdevs are bound to
a tc block and filter rules added. Previously the rule would be passed to
the reprs and would be rejected in all but the first as the cookie value
will indicate a duplicate. The first patch extends the flow lookup
function to consider both host context and ingress netdev along with the
cookie value. This means that a rule with a given cookie can exist
multiple times assuming the ingress netdev is different. The host context
ensures that stats from fw are associated with the correct instance of the
rule.
The second patch protects against rejecting add/del/stat messages when a
rule has a repr as both an ingress port and an egress dev. In such cases a
callback can be triggered twice (once for ingress and once for egress)
and can lead to duplicate rule detection or incorrect double calls.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Wed, 25 Apr 2018 04:17:04 +0000 (21:17 -0700)]
nfp: flower: ignore duplicate cb requests for same rule
If a flower rule has a repr both as ingress and egress port then 2
callbacks may be generated for the same rule request.
Add an indicator to each flow as to whether or not it was added from an
ingress registered cb. If so then ignore add/del/stat requests to it from
an egress cb.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Wed, 25 Apr 2018 04:17:03 +0000 (21:17 -0700)]
nfp: flower: support offloading multiple rules with same cookie
When multiple netdevs are attached to a tc offload block and register for
callbacks, a rule added to the block will be propogated to all netdevs.
Previously these were detected as duplicates (based on cookie) and
rejected. Modify the rule nfp lookup function to optionally include an
ingress netdev and a host context along with the cookie value when
searching for a rule. When a new rule is passed to the driver, the netdev
the rule is to be attached to is considered when searching for dublicates.
When a stats update is received from HW, the host context is used
alongside the cookie to map to the correct host rule.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 25 Apr 2018 04:17:02 +0000 (21:17 -0700)]
nfp: print PCIe link bandwidth on probe
To aid debugging of performance issues caused by limited PCIe
bandwidth print the PCIe link information on probe.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>