OSDN Git Service
LABBE Corentin [Wed, 31 May 2017 07:18:32 +0000 (09:18 +0200)]
net-next: stmmac: export stmmac_set_mac_addr/stmmac_get_mac_addr
Thoses symbol will be needed for the dwmac-sun8i ethernet driver.
For letting it to be build as module, they need to be exported.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Rothwell [Wed, 31 May 2017 05:43:37 +0000 (15:43 +1000)]
powerpc: use asm-generic/socket.h as much as possible
asm-generic/socket.h already has an exception for the differences that
powerpc needs, so just include it after defining the differences.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Thu, 1 Jun 2017 13:26:46 +0000 (16:26 +0300)]
mlxsw: spectrum: Implement the ethtool flash_device callback
Add callback to the ethtool flash_device op. This callback uses the mlxfw
module to flash the new firmware file to the device.
As the firmware flash process takes about 20 seconds and ethtool takes the
rtnl lock during the flash_device callback, release the rtnl lock at the
beginning of the flash process and take it again before leaving the
callback. This way, the rtnl is not held during the process. To make sure
the device does not get deleted during the flash process, take a reference
to it before releasing the rtnl lock.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 1 Jun 2017 16:17:21 +0000 (12:17 -0400)]
Merge branch 'qed-Status-block-changes'
Yuval Mintz says:
====================
qed: Status block changes
The device maintains a CAM mapping of the internal status blocks
and the various PF/VF MSI-x vector mappings.
During initialization, the driver reads the HW memory and constructs
a shadow SW implementation which it would later use for manipulation
of interrupts. E.g., when enabling VFs and setting their MSI-x tables.
The driver currently has some very strict assumptions on the order the
entries are placed in the CAM. Specifically, it assumes that all entries
belonging to a PF would be consecutive and in-order in the CAM, and that
the VF entries would then follow. But there's no actual HW constraint
enforcing this assumption [although management firmware does set it
accordingly to same assumption initially].
Since the CAM is re-configurable, there are now SW flows employeed
by other OSes that might cause the assumption to be invalid.
Such flows allow the PF to forfeit some of it's available interrupts
in favor of its VFs or vice versa.
While those are not employeed today by qed, we want to relax the
assumptions as much as we can -
both to allow functionality after PDA as well as allowing future
compatibility where the driver would be loaded after a newer one has
'dirtied' the CAM configuration.
In addition to patches meant for the above relaxation, the series
also contains various cleanups & refactoring for interrupt logic
[most of which is !semantic].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Thu, 1 Jun 2017 12:29:11 +0000 (15:29 +0300)]
qed: No need to reset SBs on IOV init
Since we're resetting the IGU CAM each time we initialize the PF
device, there's no need to reset the VF SBs again when initializing
IOV.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Thu, 1 Jun 2017 12:29:10 +0000 (15:29 +0300)]
qed: Reset IGU CAM to default on init
The IGU CAM contains an assocaition between hardware SBs
and interrupt lines, and it can be dynamically configured
to allow more interrupts in one entity over another, specifically
for Re-distibution of SBs between a PF and its child VFs.
While we don't yet use this functionality, there are other
clients that do and as such its possible the information
passed from management firmware during initialization in
regard to the possible number of SBs doesn't accurately reflect
the current HW configuration.
The following changes are going to apply to the driver init sequence:
a. PF is going to re-configure all entries belonging to itself and
its child VFs in IGU CAM based on the management firmware info
regarding the number of SBs that are supposed to exist there.
b. PF is going to stop using the SB resource [management firmware
provided information] for anything but the initialization.
Instead, it would use the live-time counters it maintains for
the numbers.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Thu, 1 Jun 2017 12:29:09 +0000 (15:29 +0300)]
qed: Hold a single array for SBs
A PF today holds 2 different arrays - one holding information
about the HW configuration and one holding information about
the SBs that are used by the protocol drivers.
These arrays aren't really connected - e.g., protocol driver
initializing a given SB would not mark the same SB as occupied
in the HW shadow array.
Move into a single array [at least for PFs] - hold the mapping
of the driver-protocol SBs on the HW entry which they configure.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Thu, 1 Jun 2017 12:29:08 +0000 (15:29 +0300)]
qed: Provide auxiliary for getting free VF SB
IOV code is very intrusive in its manipulation of the status block
database.
Add a new auxiliary function to allow the PF to find an available unused
status block to configure for a specific VF's MSI-x vector.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Thu, 1 Jun 2017 12:29:07 +0000 (15:29 +0300)]
qed: Remove assumption on SB order in IGU
Current code assumes there's a known layout for SBs in the IGU,
where all the SBs of a single entity would be laid in consecutive
order of vectors.
While the assumption is still kept by management firmware, we already
have the necessary information to eliminate it, so no reason to keep
it in code.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Thu, 1 Jun 2017 12:29:06 +0000 (15:29 +0300)]
qed: Encapsulate interrupt counters in struct
We already have an API struct that contains interrupt-related
numbers. Use it to encapsulate all information relating to the
status of SBs as (used|free).
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Thu, 1 Jun 2017 12:29:05 +0000 (15:29 +0300)]
qed: Add aux. function translating sb_id -> igu_sb_id
An additional step for relaxing the IGU order assumption, we now add
an auxiliary function that can be used for finding the HW status block
that's associated with a given MSI-x vector.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Thu, 1 Jun 2017 12:29:04 +0000 (15:29 +0300)]
qed: Distinguish between sb_id and igu_sb_id
In qed code, sb_id means 2 different things:
- An interrupt vector [usually when received as a parameter from
a protocol driver, but not only] that's associated with a status
block.
- An index to a status block entity existing in HW.
This patch renames the references to the HW entity, adding an 'igu_'
prefix to allow an easier distinction.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Thu, 1 Jun 2017 12:29:03 +0000 (15:29 +0300)]
qed: IGU read revised
As a first step for relaxing various assumptions done by driver
about the IGU mapping, the driver is now going to read the entire
IGU into a shadow copy, and mark in its database each status block
that's relevant for it.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Thu, 1 Jun 2017 12:29:02 +0000 (15:29 +0300)]
qed: Minor refactoring in interrupt code
Separate the portions controlling interrupt enablement form those
controlling the ability of HW to generate attentions.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Thu, 1 Jun 2017 12:29:01 +0000 (15:29 +0300)]
qed: Make qed_int_cau_conf_pi() static
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 1 Jun 2017 12:22:42 +0000 (13:22 +0100)]
net: dsa: make function ksz_rcv static
function ksz_rcv can be made static as it does not need to be
in global scope. Reformat arguments to make it checkpatch warning
free too.
Cleans up sparse warning: "symbol 'ksz_rcv' was not declared. Should
it be static?"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Thu, 1 Jun 2017 09:58:39 +0000 (17:58 +0800)]
ppp: remove unnecessary bh disable in xmit path
Since the commit
55454a565836 ("ppp: avoid dealock on recursive xmit"),
the PPP xmit path is protected by wrapper functions which disable the
bh already. So it is unnecessary to disable the bh again in the real
xmit path.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Thu, 1 Jun 2017 05:53:25 +0000 (22:53 -0700)]
ipv4: route: restore skb_dst_set in inet_rtm_getroute
recent updates to inet_rtm_getroute dropped skb_dst_set in
inet_rtm_getroute. This patch restores it because it is
needed to release the dst correctly.
Fixes:
3765d35ed8b9 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Reported-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 1 Jun 2017 02:35:00 +0000 (19:35 -0700)]
bpf: Take advantage of stack_depth tracking in sparc64 JIT
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 1 Jun 2017 00:56:40 +0000 (20:56 -0400)]
Merge branch 'dsa-add-Microchip-KSZ9477-DSA-driver'
Woojung Huh says:
====================
dsa: add Microchip KSZ9477 DSA driver
This series of patches is for Microchip KSZ9477 DSA driver.
KSZ9477 is 7 ports GigE switch with numerous advanced features.
5 ports are 10/100/1000 Mbps internal PHYs and 2 ports have
Interfaces to SGMII, RGMII, MII or RMII.
This patch supports VLAN, MDB, FDB and port mirroring offloads.
Welcome reviews and comments from community.
Note: Tests are performed on internal development board.
V5
- add missing MODULE_LICENSE
V4
- update per review comments
- cosmetic changes
- net/dsa/tag_ksz.c
* skb_put() & memset() are changed to skb_put_padto()
- drivers/net/dsa/microchip/ksz_common.
* vlan access mutex is updated
* mib_names[] is changed to static const
V3
- update per review comments
- cosmetic changes
- drivers/net/dsa/microchip/ksz_common.c
* clean up ksz_switch_chips[]
* consolidate checking loops into functions
* update mutex for better locking
* replace devm_kmalloc_array() to devm_kcalloc()
- MAINTAINERS
* add missing net/dsa/tag_ksz.c
V2
- update per review comments
- several cosmetic changes
- net/dsa/tag_ksz.c
* constants are changed to defines
* remove skb_linearize() in ksz_rcv()
* ksz_xmit()checks skb tailroom before allocate new skb
- drivers/net/phy/micrel.c
* remove PHY_HAS_MAGICANEG from ksphy_driver[]
- drivers/net/dsa/microchip/ksz_common.c
* add timeout to avoid endless loop
* port initialization is move to ksz_port_enable() instead of ksz_setup_ports()
- Documentation/devicetree/bindings/net/dsa/ksz.txt
* fix typo and indentations
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Woojung Huh [Wed, 31 May 2017 20:19:29 +0000 (20:19 +0000)]
dsa: add maintainer of Microchip KSZ switches
Adding maintainer of Microchip KSZ switches.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Woojung Huh [Wed, 31 May 2017 20:19:23 +0000 (20:19 +0000)]
net: dsa: Add Microchip KSZ switches binding
A sample SPI configuration for Microchip KSZ switches.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Woojung Huh [Wed, 31 May 2017 20:19:19 +0000 (20:19 +0000)]
dsa: add DSA switch driver for Microchip KSZ9477
The KSZ9477 is a fully integrated layer 2, managed, 7 ports GigE switch
with numerous advanced features. 5 ports incorporate 10/100/1000 Mbps PHYs.
The other 2 ports have interfaces that can be configured as SGMII, RGMII, MII
or RMII. Either of these may connect directly to a host processor or
to an external PHY. The SGMII port may interface to a fiber optic transceiver.
This driver currently supports vlan, fdb, mdb & mirror dsa switch operations.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Woojung Huh [Wed, 31 May 2017 20:19:13 +0000 (20:19 +0000)]
phy: micrel: add Microchip KSZ 9477 Switch PHY support
Adding Microchip 9477 Phy included in KSZ9477 Switch.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Woojung Huh [Wed, 31 May 2017 20:19:06 +0000 (20:19 +0000)]
dsa: add support for Microchip KSZ tail tagging
Adding support for the Microchip KSZ switch family tail tagging.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 May 2017 23:29:48 +0000 (19:29 -0400)]
Merge branch 'bpf-stack-tracker'
Alexei Starovoitov says:
====================
bpf: stack depth tracking
Introduce tracking of bpf program stack depth in the verifier and use that
info to reduce bpf program stack consumption in the interpreter and x64 JIT.
Other JITs can take advantage of it as well in the future.
Most of the programs consume very little stack, so it's good optimization
in general and it's the first step toward bpf to bpf function calls.
Also use internal opcode for bpf_tail_call() marking to make clear
that jmp|call|x opcode is not uapi and may be used for actual
indirect call opcode in the future.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 30 May 2017 20:31:35 +0000 (13:31 -0700)]
bpf: take advantage of stack_depth tracking in x64 JIT
Take advantage of stack_depth tracking in x64 JIT.
Round up allocated stack by 8 bytes to make sure it stays aligned
for functions called from JITed bpf program.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 30 May 2017 20:31:34 +0000 (13:31 -0700)]
bpf: change x86 JITed program stack layout
in order to JIT programs with different stack sizes we need to
make epilogue and exception path to be stack size independent,
hence move auxiliary stack space from the bottom of the stack
to the top of the stack.
Nice side effect is that JITed function prologue becomes shorter
due to imm8 offset encoding vs imm32.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 30 May 2017 20:31:33 +0000 (13:31 -0700)]
bpf: use different interpreter depending on required stack size
16 __bpf_prog_run() interpreters for various stack sizes add .text
but not a lot comparing to run-time stack savings
text data bss dec hex filename
26350 10328 624 37302 91b6 kernel/bpf/core.o.before_split
25777 10328 624 36729 8f79 kernel/bpf/core.o.after_split
26970 10328 624 37922 9422 kernel/bpf/core.o.now
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 30 May 2017 20:31:32 +0000 (13:31 -0700)]
bpf: fix stack_depth usage by test_bpf.ko
test_bpf.ko doesn't call verifier before selecting interpreter or JITing,
hence the tests need to manually specify the amount of stack they consume.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 30 May 2017 20:31:31 +0000 (13:31 -0700)]
bpf: track stack depth of classic bpf programs
To track stack depth of classic bpf programs we only need
to analyze ST|STX instructions, since check_load_and_stores()
verifies that programs can load from stack only after write.
We also need to change the way cBPF stack slots map to eBPF stack,
since typical classic programs are using slots 0 and 1, so they
need to map to stack offsets -4 and -8 respectively in order
to take advantage of small stack interpreter and JITs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 30 May 2017 20:31:30 +0000 (13:31 -0700)]
bpf: reconcile bpf_tail_call and stack_depth
The next set of patches will take advantage of stack_depth tracking,
so make sure that the program that does bpf_tail_call() has
stack depth large enough for the callee.
We could have tracked the stack depth of the prog_array owner program
and only allow insertion of the programs with stack depth less
than the owner, but it will break existing applications.
Some of them have trivial root bpf program that only does
multiple bpf_tail_calls and at init time the prog array is empty.
In the future we may add a flag to do such tracking optionally,
but for now play simple and safe.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 30 May 2017 20:31:29 +0000 (13:31 -0700)]
bpf: teach verifier to track stack depth
teach verifier to track bpf program stack depth
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 30 May 2017 20:31:28 +0000 (13:31 -0700)]
bpf: split bpf core interpreter
split __bpf_prog_run() interpreter into stack allocation and execution parts.
The code section shrinks which helps interpreter performance in some cases.
text data bss dec hex filename
26350 10328 624 37302 91b6 kernel/bpf/core.o.before
25777 10328 624 36729 8f79 kernel/bpf/core.o.after
Very short programs got slower (due to extra function call):
Before:
test_bpf: #89 ALU64_ADD_K: 1 + 2 = 3 jited:0 7 PASS
test_bpf: #90 ALU64_ADD_K: 3 + 0 = 3 jited:0 8 PASS
test_bpf: #91 ALU64_ADD_K: 1 +
2147483646 =
2147483647 jited:0 7 PASS
test_bpf: #92 ALU64_ADD_K:
4294967294 + 2 =
4294967296 jited:0 11 PASS
test_bpf: #93 ALU64_ADD_K:
2147483646 + -
2147483647 = -1 jited:0 7 PASS
After:
test_bpf: #89 ALU64_ADD_K: 1 + 2 = 3 jited:0 11 PASS
test_bpf: #90 ALU64_ADD_K: 3 + 0 = 3 jited:0 11 PASS
test_bpf: #91 ALU64_ADD_K: 1 +
2147483646 =
2147483647 jited:0 11 PASS
test_bpf: #92 ALU64_ADD_K:
4294967294 + 2 =
4294967296 jited:0 14 PASS
test_bpf: #93 ALU64_ADD_K:
2147483646 + -
2147483647 = -1 jited:0 10 PASS
Longer programs got faster:
Before:
test_bpf: #266 BPF_MAXINSNS: Ctx heavy transformations jited:0 20286 20513 PASS
test_bpf: #267 BPF_MAXINSNS: Call heavy transformations jited:0 31853 31768 PASS
test_bpf: #268 BPF_MAXINSNS: Jump heavy test jited:0 9815 PASS
test_bpf: #269 BPF_MAXINSNS: Very long jump backwards jited:0 6 PASS
test_bpf: #270 BPF_MAXINSNS: Edge hopping nuthouse jited:0 13959 PASS
test_bpf: #271 BPF_MAXINSNS: Jump, gap, jump, ... jited:0 210 PASS
test_bpf: #272 BPF_MAXINSNS: ld_abs+get_processor_id jited:0 21724 PASS
test_bpf: #273 BPF_MAXINSNS: ld_abs+vlan_push/pop jited:0 19118 PASS
After:
test_bpf: #266 BPF_MAXINSNS: Ctx heavy transformations jited:0 19008 18827 PASS
test_bpf: #267 BPF_MAXINSNS: Call heavy transformations jited:0 29238 28450 PASS
test_bpf: #268 BPF_MAXINSNS: Jump heavy test jited:0 9485 PASS
test_bpf: #269 BPF_MAXINSNS: Very long jump backwards jited:0 12 PASS
test_bpf: #270 BPF_MAXINSNS: Edge hopping nuthouse jited:0 13257 PASS
test_bpf: #271 BPF_MAXINSNS: Jump, gap, jump, ... jited:0 213 PASS
test_bpf: #272 BPF_MAXINSNS: ld_abs+get_processor_id jited:0 19389 PASS
test_bpf: #273 BPF_MAXINSNS: ld_abs+vlan_push/pop jited:0 19583 PASS
For real world production programs the difference is noise.
This patch is first step towards reducing interpreter stack consumption.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Tue, 30 May 2017 20:31:27 +0000 (13:31 -0700)]
bpf: free up BPF_JMP | BPF_CALL | BPF_X opcode
free up BPF_JMP | BPF_CALL | BPF_X opcode to be used by actual
indirect call by register and use kernel internal opcode to
mark call instruction into bpf_tail_call() helper.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 May 2017 21:58:14 +0000 (17:58 -0400)]
Merge branch 'nfp-move-BPF-offload-code-into-app'
Jakub Kicinski says:
====================
nfp: move BPF offload code into app
This series moves the eBPF offload code out of netdev/vNIC handling and
starts building the nfp_app. Port init is moved into the apps as well
because various apps associate vNICs, representors with ports differently.
First patch adds a helper for updating tc stats which has been waiting
in my tree to be included in any moderately related series.
Next series will bring communicating with FW using control messages,
then representors, BPF maps, tc flower... :)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 31 May 2017 15:06:51 +0000 (08:06 -0700)]
nfp: fix memory leak on FW load error
Free management FW info when app FW load failed.
Fixes:
eefbde7e1002 ("nfp: add hwmon support")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 31 May 2017 15:06:50 +0000 (08:06 -0700)]
nfp: move basic eBPF stats to app-specific code
Allow apps to associate private data with vNICs and move
BPF-specific fields of nfp_net to such structure.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 31 May 2017 15:06:49 +0000 (08:06 -0700)]
nfp: move bpf offload code to the BPF app
Move bulk of the eBPF offload code out of common vNIC code into
app-specific callbacks.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 31 May 2017 15:06:48 +0000 (08:06 -0700)]
nfp: move eBPF offload files to BPF app directory
Pure move of eBPF offload files to BPF app directory,
only change the names and relative header location.
nfp_asm.h stays in the main dir and it doesn't really
have to include nfp_bpf.h.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 31 May 2017 15:06:47 +0000 (08:06 -0700)]
nfp: report app name in ethtool -i
Let the app print its name in ethtool -i output.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 31 May 2017 15:06:46 +0000 (08:06 -0700)]
nfp: move port init to apps
Start fleshing out the apps by turning the vNIC init code to
a per-app callback. The two initial apps we have are NIC and
eBPF.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 31 May 2017 15:06:45 +0000 (08:06 -0700)]
nfp: turn reading PCIe RTsym parameters into a helper
Turn the function to read number of ports into a generic helper.
While at it make sure we propagate all errors other than -ENOENT.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 31 May 2017 15:06:44 +0000 (08:06 -0700)]
nfp: add missing fall through statements
GCC 7 checks for fall through comments, add the two missing ones.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 31 May 2017 15:06:43 +0000 (08:06 -0700)]
sched: add helper for updating statistics on all actions
Forgetting to disable preemption around tcf_action_stats_update()
seems to be a common mistake. Add a helper function for updating
stats on all actions of a filter.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 May 2017 21:55:10 +0000 (17:55 -0400)]
Merge branch '10GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
10GbE Intel Wired LAN Driver Updates 2017-05-31
This series contains updates to ixgbe and ixgbevf only.
Scott enables support for TSO & GSO for MPLS encapsulated packets for both
ixgbe and ixgbevf.
Liwei Song fixes an issue where seqcount/seqlock in ixgbe_get_stats64()
are not initialized in time, so move the initialization into probe routine
after the transmit and receive rings are initialized.
Paul cleans up led_[on|off] for X550EM_X, since the firmware configures
the PHY & MAC and we have no PHY access so LED on/off is not supported
with this device.
Emil provides several fixes, starting with enabling RSS on VF to VF
traffic on the same PF. Fixed PHY identification, where the previous
method was unreliable, so use a different register to ensure proper
identification. Cleaned up the logic which could cause us to
skip the link configuration, this skipping over the link configuration
was leaving SFP+ PHY's in an unstable state, so always call
setup_mac_link(). Added RS1 (rate select 1) support for ixgbe. Lastly,
fixed incorrect logic in the setting up of SFP+ link speed.
Mark fixes the thermal sensor event logic, where it was being executed
when there really was no thermal event. So simplify the logic to only
execute when there is a thermal event.
Tony adds additional error checks and reporting when setting a VF MAC
address to ensure that the MAC filter was successfully added. Also
fixed possible truncation warnings, as well as implicit fallthrough
warnings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 May 2017 21:49:37 +0000 (17:49 -0400)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2017-05-31
This series contains updates to i40e and i40evf only.
Jesse provides a couple of fixes, starting with cleaning up duplicate
lines of code. Fixed a missing line which enables RSS as a negotiated
feature. Since the VF does not have any way of reporting FCoE enabled,
so just force the code to always report FCoE as disabled.
Jake provides several fixes and changes, starting with fixing a race
condition in i40e. The hardware has a limitation on transmit PTP packets,
which requires us to limit the driver to timestamping a single packet at
once. This is done using a state bitlock which enforces that only one
timestamp request is honored at a time, unfortunately this suffers from
a race condition. Fixed a corner case where we failed to cleanup the
bit lock after a failed transmit, and resulted in a state bit being
locked forever. Added a new statistic which tracks when a transmit
timestamp request is skipped/ignored, since the driver can only handle
one transmit timestamp request at a time.
Christophe Jaillet fixes a NULL pointer dereference if kzalloc fails.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Kelley [Tue, 30 May 2017 18:36:56 +0000 (11:36 -0700)]
netvsc: Add #include's for csum_* function declarations
Add direct #include statements for declarations of csum_tcpudp_magic()
and csum_ipv6_magic(). While the needed #include's are picked up
indirectly for the x86 architecture, they aren't on other
architectures, resulting in compile errors.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Tue, 30 May 2017 14:07:02 +0000 (10:07 -0400)]
rtnetlink: use the new rtnl_get_event() interface
Small clean-up to rtmsg_ifinfo() to use the rtnl_get_event()
interface instead of using 'internal' values directly.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer [Tue, 30 May 2017 12:37:51 +0000 (14:37 +0200)]
samples/bpf: bpf_load.c order of prog_fd[] should correspond with ELF order
An eBPF ELF file generated with LLVM can contain several program
section, which can be used for bpf tail calls. The bpf prog file
descriptors are accessible via array prog_fd[].
At-least XDP samples assume ordering, and uses prog_fd[0] is the main
XDP program to attach. The actual order of array prog_fd[] depend on
whether or not a bpf program section is referencing any maps or not.
Not using a map result in being loaded/processed after all other
prog section. Thus, this can lead to some very strange and hard to
debug situation, as the user can only see a FD and cannot correlated
that with the ELF section name.
The fix is rather simple, and even removes duplicate memcmp code.
Simply load program sections as the last step, instead of
load_and_attach while processing the relocation section.
When working with tail calls, it become even more essential that the
order of prog_fd[] is consistant, like the current dependency of the
map_fd[] order.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Tue, 30 May 2017 09:26:14 +0000 (11:26 +0200)]
net/mlxfw: select CONFIG_XZ_DEC
The new mlxfw code fails to build without the xz library:
drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.o: In function `mlxfw_mfa2_xz_dec_run':
:(.text.mlxfw_mfa2_xz_dec_run+0x8): undefined reference to `xz_dec_run'
drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.o: In function `mlxfw_mfa2_file_component_get':
:(.text.mlxfw_mfa2_file_component_get+0x218): undefined reference to `xz_dec_init'
:(.text.mlxfw_mfa2_file_component_get+0x2c0): undefined reference to `xz_dec_end'
This adds a Kconfig 'select' statement for it, which is also what
the other user of that library has.
Fixes:
410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 26 May 2017 22:12:51 +0000 (18:12 -0400)]
net: dsa: remove dev arg of dsa_register_switch
The current dsa_register_switch function takes a useless struct device
pointer argument, which always equals ds->dev.
Drivers either call it with ds->dev, or with the same device pointer
passed to dsa_switch_alloc, which ends up being assigned to ds->dev.
This patch removes the second argument of the dsa_register_switch and
_dsa_register_switch functions.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 May 2017 16:35:01 +0000 (12:35 -0400)]
Merge branch 'dsa-mv88e6xxx-PHY-nitpicks'
Vivien Didelot says:
====================
net: dsa: mv88e6xxx: PHY nitpicks
This patchset isolates more PPU code into phy.c and makes distinction
between PHY Registers read and write implementations vs. generic PHY
routines.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 26 May 2017 22:03:07 +0000 (18:03 -0400)]
net: dsa: mv88e6xxx: rename PHY PPU functions
Respect the implicit naming convention used in all register sets
specific files, by renaming the mv88e6xxx_ppu_* functions with the
mv88e6xxx_phy_* prefix.
This is simply a s/xxx_ppu/xxx_phy_ppu/ substitution.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 26 May 2017 22:03:06 +0000 (18:03 -0400)]
net: dsa: mv88e6xxx: rename PHY PPU accessors
Make it clear that mv88e6xxx_phy_ppu_{read,write} are an implementation
of the .phy_{read,write} operations, by renaming them with the mv88e6185
prefix, since
88E6185 it is the reference switch model supported in an
upstream board (ZII Dev Rev B), which makes use of them.
Distinguish the signatures of implementation specific and generic PHY
functions in the phy.h header.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 26 May 2017 22:03:05 +0000 (18:03 -0400)]
net: dsa: mv88e6xxx: provide a PHY setup helper
Similarly to the VTU, PVT and ATU setup, provide a mv88e6xxx_phy_setup
helper which wraps mv88e6xxx_ppu_enable, so that no more PPU-related
functions are exposed outside of phy.c.
Thus make mv88e6xxx_ppu_enable static.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Emil Tantilov [Thu, 18 May 2017 23:45:06 +0000 (16:45 -0700)]
ixgbe: fix incorrect status check
Check for ret_val instead of !ret_val to allow the rest of
the code to execute and configure the speed properly.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Wed, 17 May 2017 22:17:56 +0000 (15:17 -0700)]
ixgbe: add missing configuration for rate select 1
Add RS1 configuration to ixgbe_set_soft_rate_select_speed()
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Wed, 17 May 2017 22:17:51 +0000 (15:17 -0700)]
ixgbe: always call setup_mac_link for multispeed fiber
Remove the logic which would previously skip the link configuration
in the case where we are already at the requested speed in
ixgbe_setup_mac_link_multispeed_fiber().
By exiting early we are skipping the link configuration and as such
the driver may not always configure the PHY correctly for SFP+.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Wed, 17 May 2017 22:17:46 +0000 (15:17 -0700)]
ixgbe: add write flush when configuring CS4223/7
Make sure the writes are processed immediately. Without the flush it
is possible for operations on one port to spill over the other as the
resource is shared.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Wed, 17 May 2017 22:17:41 +0000 (15:17 -0700)]
ixgbe: correct CS4223/7 PHY identification
Previous method was unreliable. Use a different register to
differentiate between the SKUs.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tony Nguyen [Fri, 12 May 2017 18:38:10 +0000 (11:38 -0700)]
ixgbevf: Resolve warnings for -Wimplicit-fallthrough
Additions to gcc 7 now warn whenever a switch statement falls through
implicitly. This patch adds explicit fall through comments to address the
following warnings:
drivers/net/ethernet/intel/ixgbevf/vf.c: In function ‘ixgbevf_get_reta_locked’:
drivers/net/ethernet/intel/ixgbevf/vf.c:336:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->mac.type < ixgbe_mac_X550_vf)
^
drivers/net/ethernet/intel/ixgbevf/vf.c:338:2: note: here
default:
^~~~~~~
drivers/net/ethernet/intel/ixgbevf/vf.c: In function ‘ixgbevf_get_rss_key_locked’:
drivers/net/ethernet/intel/ixgbevf/vf.c:402:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->mac.type < ixgbe_mac_X550_vf)
^
drivers/net/ethernet/intel/ixgbevf/vf.c:404:2: note: here
default:
^~~~~~~
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tony Nguyen [Fri, 12 May 2017 18:38:09 +0000 (11:38 -0700)]
ixgbevf: Resolve truncation warning for q_vector->name
The following warning is now shown as a result of new checks added for
gcc 7:
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_open’:
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1363:13: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size between 3 and 18 [-Wformat-truncation=]
"%s-%s-%d", netdev->name, "TxRx", ri++);
^~
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1363:6: note: directive argument in the range [0,
2147483647]
"%s-%s-%d", netdev->name, "TxRx", ri++);
^~~~~~~~~~
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1362:4: note: ‘snprintf’ output between 8 and 32 bytes into a destination of size 24
snprintf(q_vector->name, sizeof(q_vector->name) - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s-%s-%d", netdev->name, "TxRx", ri++);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Resolve this warning by making a couple of changes.
- Don't reserve space for the null terminator. Since snprintf adds the
null terminator automatically, there is no need for us to reserve a byte
for it.
- Change a couple variables that can never be negative from int to
unsigned int.
While we're making changes to the format string, move the constant strings
into the format string instead of providing them as specifiers.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tony Nguyen [Wed, 31 May 2017 11:43:47 +0000 (04:43 -0700)]
ixgbe: Resolve warnings for -Wimplicit-fallthrough
This patch adds/changes fall through comments to address new warnings
produced by gcc 7.
Fixed formatting on a couple of comments in the function.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tony Nguyen [Fri, 12 May 2017 18:38:07 +0000 (11:38 -0700)]
ixgbe: Resolve truncation warning for q_vector->name
The following warning is now shown as a result of new checks added for
gcc 7:
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c: In function ‘ixgbe_open’:
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3118:13: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size between 3 and 18 [-Wformat-truncation=]
"%s-%s-%d", netdev->name, "TxRx", ri++);
^~
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3118:6: note: directive argument in the range [0,
2147483647]
"%s-%s-%d", netdev->name, "TxRx", ri++);
^~~~~~~~~~
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3117:4: note: ‘snprintf’ output between 8 and 32 bytes into a destination of size 24
snprintf(q_vector->name, sizeof(q_vector->name) - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s-%s-%d", netdev->name, "TxRx", ri++);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Resolve this warning by making a couple of changes.
- Don't reserve space for the null terminator. Since snprintf adds the
null terminator automatically, there is no need for us to reserve a byte
for it.
- Change a couple variables that can never be negative from int to
unsigned int.
While we're making changes to the format string, move the constant strings
into the format string instead of providing them as specifiers.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tony Nguyen [Fri, 28 Apr 2017 19:42:03 +0000 (12:42 -0700)]
ixgbe: Add error checking to setting VF MAC
Currently, when setting a VF MAC address there are no error checks to
ensure that the MAC filter was successfully added. This patch adds
additional error checks, reporting, and propagation of errors. It also
will not set the MAC address unless adding the MAC filter was successful.
With these changes, setting the mac address to zeros can no longer call
ixgbe_set_vf_mac() as adding a zero MAC address filter is not valid.
Instead directly delete the filter and, if successful, clear the MAC
address.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mark Rustad [Tue, 25 Apr 2017 20:55:25 +0000 (13:55 -0700)]
ixgbe: Correct thermal sensor event check
The thermal sensor event logic is messed up, because it can execute
the code when there is no thermal event. The current logic is that
it will exit when !capable && !event whereas it really should exit
when !capable || !event. For one thing, it means that the service
task is doing too much work. It probably has some other symptoms as
well. So, correct the logic, simplifying to only execute when there
is a thermal event. The capable check is redundant.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Emil Tantilov [Tue, 25 Apr 2017 18:31:06 +0000 (11:31 -0700)]
ixgbe: enable L3/L4 filtering for Tx switched packets
This will ensure that VF-to-VF traffic on the same PF
is filtered to allow RSS operation.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Paul Greenwalt [Fri, 21 Apr 2017 09:37:13 +0000 (05:37 -0400)]
ixgbe: Remove MAC X550EM_X 1Gbase-t led_[on|off] support
Since FW configures the PHY and MAC X550EM_X has no
PHY access, led_[on|off] is not supported with the 1Gbase-t design.
Removed MAC X550EM_X 1Gbase-t led_[on|off] support by setting
function pointers to NULL and added NULL pointer checks. Also set
init_led_link_act to NULL and added NULL pointer check.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Liwei Song [Mon, 5 Dec 2016 03:40:44 +0000 (22:40 -0500)]
ixgbe: initialize u64_stats_sync structures early at ixgbe_probe
Fix the following CallTrace:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 71 PID: 1 Comm: swapper/0 Not tainted 4.8.8-WR9.0.0.1_standard #11
Hardware name: Intel Corporation S2600WTT/S2600WTT,
BIOS GRNDSDP1.86B.0036.R05.
1407140519 07/14/2014
00200086 00200086 eb5e1ab8 c144dd70 00000000 00000000 eb5e1af8 c10af89a
c1d23de4 eb5e1af8 00000009 eb5d8600 eb5d8638 eb5e1af8 c10b14d8 00000009
0000000a c1d32911 00000000 00000000 e44c826c eb5d8000 eb5e1b74 c10b214e
Call Trace:
[<
c144dd70>] dump_stack+0x5f/0x8f
[<
c10af89a>] register_lock_class+0x25a/0x4c0
[<
c10b14d8>] ? check_irq_usage+0x88/0xc0
[<
c10b214e>] __lock_acquire+0x5e/0x17a0
[<
c1abdb9b>] ? _raw_spin_unlock_irqrestore+0x3b/0x70
[<
c10cf14a>] ? rcu_read_lock_sched_held+0x8a/0x90
[<
c10b3c5f>] lock_acquire+0x9f/0x1f0
[<
c1922dcf>] ? dev_get_stats+0x5f/0x110
[<
c176e6b3>] ixgbe_get_stats64+0x113/0x320
[<
c1922dcf>] ? dev_get_stats+0x5f/0x110
[<
c1922dcf>] dev_get_stats+0x5f/0x110
[<
c1ab5415>] rtnl_fill_stats+0x40/0x105
[<
c193dd45>] rtnl_fill_ifinfo+0x4c5/0xd20
[<
c11c5115>] ? __kmalloc_node_track_caller+0x1a5/0x410
[<
c1917487>] ? __kmalloc_reserve.isra.42+0x27/0x80
[<
c191754f>] ? __alloc_skb+0x6f/0x270
[<
c1942291>] rtmsg_ifinfo_build_skb+0x71/0xd0
[<
c194230a>] rtmsg_ifinfo.part.23+0x1a/0x50
[<
c1923dad>] ? call_netdevice_notifiers_info+0x2d/0x60
[<
c194236b>] rtmsg_ifinfo+0x2b/0x40
[<
c192f997>] register_netdevice+0x3d7/0x4d0
[<
c192faa7>] register_netdev+0x17/0x30
[<
c177b83d>] ixgbe_probe+0x118d/0x1610
[<
c1498202>] local_pci_probe+0x32/0x80
[<
c1498172>] ? pci_match_device+0xd2/0x100
[<
c14991e0>] pci_device_probe+0xc0/0x110
[<
c1652cc5>] driver_probe_device+0x1c5/0x280
[<
c1498172>] ? pci_match_device+0xd2/0x100
[<
c1652e09>] __driver_attach+0x89/0x90
[<
c1652d80>] ? driver_probe_device+0x280/0x280
[<
c165114f>] bus_for_each_dev+0x4f/0x80
[<
c165269e>] driver_attach+0x1e/0x20
[<
c1652d80>] ? driver_probe_device+0x280/0x280
[<
c1652317>] bus_add_driver+0x1a7/0x220
[<
c1653a79>] driver_register+0x59/0xe0
[<
c1f897b8>] ? igb_init_module+0x49/0x49
[<
c1497b2a>] __pci_register_driver+0x4a/0x50
[<
c1f8985d>] ixgbe_init_module+0xa5/0xc4
[<
c1000485>] do_one_initcall+0x35/0x150
[<
c107e818>] ? parameq+0x18/0x70
[<
c1f395d8>] ? repair_env_string+0x12/0x51
[<
c107ead0>] ? parse_args+0x260/0x3b0
[<
c1074f73>] ? __usermodehelper_set_disable_depth+0x43/0x50
[<
c1f39e90>] kernel_init_freeable+0x19b/0x267
[<
c1f395c6>] ? set_debug_rodata+0xf/0xf
[<
c10b1e7b>] ? trace_hardirqs_on+0xb/0x10
[<
c1abdc02>] ? _raw_spin_unlock_irq+0x32/0x50
[<
c1085f0b>] ? finish_task_switch+0xab/0x1f0
[<
c1085ec9>] ? finish_task_switch+0x69/0x1f0
[<
c1ab6a30>] kernel_init+0x10/0x110
[<
c108bd65>] ? schedule_tail+0x25/0x80
[<
c1abe422>] ret_from_kernel_thread+0xe/0x24
[<
c1ab6a20>] ? rest_init+0x130/0x130
This CallTrace occurred on 32-bit kernel with CONFIG_PROVE_LOCKING
enabled.
This happens at ixgbe driver probe hardware stage, when comes to
ixgbe_get_stats64, the seqcount/seqlock still not initialize, although
this was initialize in TX/RX resources setup routin, but it was too late,
then lockdep give this Warning.
To fix this, move the u64_stats_init function to driver probe stage,
which before we get the status of seqcount and after the RX/TX ring
was finished init.
Signed-off-by: Liwei Song <liwei.song@windriver.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Scott Peterson [Fri, 18 Nov 2016 19:25:42 +0000 (11:25 -0800)]
ixgbe/ixgbevf: Enables TSO for MPLS encapsulated packets
This patch advertises TSO & GSO features in netdev->mpls_features.
In ixgbe(vf)_tso() where we set up segmentation offload, the IP
header will be the inner network header when eth_p_mpls() indicates
the Ethernet protocol is MPLS (UC or MC).
Suggested-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Scott Peterson <scott.d.peterson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Christophe Jaillet [Fri, 5 May 2017 19:29:13 +0000 (21:29 +0200)]
i40e: Check for memory allocation failure
If 'kzalloc' fails, a NULL pointer will be dereferenced. Return -ENOMEM
instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Wed, 3 May 2017 17:29:02 +0000 (10:29 -0700)]
i40e: check for Tx timestamp timeouts during watchdog
The i40e driver has logic to handle only one Tx timestamp at a time,
using a state bit lock to avoid multiple requests at once.
It may be possible, if incredibly unlikely, that a Tx timestamp event is
requested but never completes. Since we use an interrupt scheme to
determine when the Tx timestamp occurred we would never clear the state
bit in this case.
Add an i40e_ptp_tx_hang() function similar to the already existing
i40e_ptp_rx_hang() function. This function runs in the watchdog routine
and makes sure we eventually recover from this case instead of
permanently disabling Tx timestamps.
Note: there is no currently known way to cause this without hacking the
driver code to force it.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Wed, 3 May 2017 17:29:01 +0000 (10:29 -0700)]
i40e: use pf data structure directly in i40e_ptp_rx_hang
There's no reason to pass a *vsi pointer if we already have the *pf
pointer in the only location where we call this function. Lets update
the signature and directly pass the *pf data structure pointer.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Wed, 3 May 2017 17:28:58 +0000 (10:28 -0700)]
i40e: add statistic indicating number of skipped Tx timestamps
The i40e driver can only handle one Tx timestamp request at a time.
This means it is possible for an application timestamp request to be
ignored.
There is no easy way for an administrator to determine if this occurred.
Add a new statistic which tracks this, tx_hwtstamp_skipped.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Wed, 3 May 2017 17:28:54 +0000 (10:28 -0700)]
i40e: avoid permanent lock of *_PTP_TX_IN_PROGRESS
The i40e driver uses a bit lock to indicate when a Tx timestamp is in
progress to avoid attempting to timestamp multiple packets at once. This
is required because hardware only has registers to handle one request at
a time.
There is a corner case where we failed to cleanup the bit lock after
a failed transmit. This can potentially result in a state bit being
locked forever.
Add some cleanup code to i40e_xmit_frame_ring to check and make sure we
cleanup incase of these failures. We also modify i40e_tx_map to return
an error code indication DMA failure.
Reported-by: Reported-by: David Mirabito <davidm@metamako.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Wed, 3 May 2017 17:28:51 +0000 (10:28 -0700)]
i40e: fix race condition with PTP_TX_IN_PROGRESS bits
Hardware related to the i40e driver has a limitation on Tx PTP packets.
This requires us to limit the driver to timestamping a single packet at
once. This is done using a state bitlock which enforces that only one
timestamp request is honored at a time.
Unfortunately this suffers from a race condition. The bit lock is not
cleared until after skb_tstamp_tx() is called notifying applications of
a new Tx timestamp. Even a well behaved application sending only one
packet at a time and waiting for a response can wake up and send a new
timestamped packet request before the bit lock is cleared. This results
in needlessly dropping some Tx timestamp requests.
We can fix this by unlocking the state bit as soon as we read the
Timestamp register, as this is the first point at which it is safe to
timestamp another packet.
To avoid issues with the skb pointer, we'll use a copy of the pointer
and set the global variable in the driver structure to NULL first. This
ensures that the next timestamp request does not modify our local copy
of the skb pointer.
Now, a well behaved application which has at most one outstanding
timestamp request will not accidentally race with the driver unlock bit.
Obviously an application attempting to timestamp faster than one request
at a time will have some timestamp requests skipped. Unfortunately there
is nothing we can do about that.
Reported-by: David Mirabito <davidm@metamako.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jesse Brandeburg [Fri, 28 Apr 2017 23:53:17 +0000 (16:53 -0700)]
i40evf: disable unused flags
The i40evf hardware doesn't have any way to ever report FCoE enabled
so just force the code to always report FCoE is disabled, remove the
unused defines, and mark the OP as reserved.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jesse Brandeburg [Fri, 28 Apr 2017 23:53:16 +0000 (16:53 -0700)]
i40evf: fix merge error in older patch
This patch fixes a missing line that was missed while merging,
which results in a driver feature in the VF not working to
enable RSS as a negotiated feature.
Fixes:
43a3d9ba34c9c ("i40evf: Allow PF driver to configure RSS")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jesse Brandeburg [Fri, 28 Apr 2017 23:53:15 +0000 (16:53 -0700)]
i40evf: fix duplicate lines
This removes two duplicate lines that snuck into the code somehow.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Michael Chan [Wed, 31 May 2017 00:03:00 +0000 (20:03 -0400)]
bnxt_en: Fix xmit_more with BQL.
We need to write the doorbell if BQL has stopped the queue and
skb->xmit_more is set. Otherwise it is possible for the tx queue to
rot and cause tx timeout.
Fixes:
4d172f21cefe ("bnxt_en: Implement xmit_more.")
Suggested-by: Yuval Mintz <yuval.mintz@cavium.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 May 2017 22:14:13 +0000 (18:14 -0400)]
Merge branch 'bnxt_en-Misc-updates-for-net-next'
Michael Chan says:
====================
bnxt_en: Misc. updates for net-next.
The 1st 2 patches add short firmware message support for new VF devices.
The 3rd patch adds a pci shutdown callback for the RDMA driver for proper
shutdown. The next 3 patches improve the doorbell operations by
elimiating the double doorbell workaround on newer chips, and by adding
xmit_more support. The last patch adds a parameter to bnxt_set_dflt_rings().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 29 May 2017 23:06:10 +0000 (19:06 -0400)]
bnxt_en: Pass in sh parameter to bnxt_set_dflt_rings().
In the existing code, the local variable sh is hardcoded to true to
calculate default rings for shared ring configuration. It is better
to have the caller determine the value of sh.
Reported-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 29 May 2017 23:06:09 +0000 (19:06 -0400)]
bnxt_en: Implement xmit_more.
Do not write the TX doorbell if skb->xmit_more is set unless the TX
queue is full.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 29 May 2017 23:06:08 +0000 (19:06 -0400)]
bnxt_en: Optimize doorbell write operations for newer chips.
Older chips require the doorbells to be written twice, but newer chips
do not. Add a new common function bnxt_db_write() to write all
doorbells appropriately depending on the chip. Eliminating the extra
doorbell on newer chips has a significant performance improvement
on pktgen.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 29 May 2017 23:06:07 +0000 (19:06 -0400)]
bnxt_en: Add additional chip ID definitions.
Add additional chip definitions and macros for all supported chips.
Add a new macro BNXT_CHIP_P4_PLUS for the newer generation of chips and
use the macro to properly determine the features supported by these
newer chips.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 29 May 2017 23:06:06 +0000 (19:06 -0400)]
bnxt_en: Add a callback to inform RDMA driver during PCI shutdown.
When bnxt_en gets a PCI shutdown call, we need to have a new callback
to inform the RDMA driver to do proper shutdown and removal.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Deepak Khungar [Mon, 29 May 2017 23:06:05 +0000 (19:06 -0400)]
bnxt_en: Add PCI IDs for BCM57454 VF devices.
Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Deepak Khungar [Mon, 29 May 2017 23:06:04 +0000 (19:06 -0400)]
bnxt_en: Support for Short Firmware Message
The new short message format is used on the new BCM57454 VFs. Each
firmware message is a fixed 16-byte message sent using the standard
firmware communication channel. The short message has a DMA address
pointing to the legacy long firmware message.
Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 26 May 2017 22:07:37 +0000 (18:07 -0400)]
net: dsa: b53: remove unused dev argument
The port net device passed to b53_fdb_copy is not used. Remove it.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 26 May 2017 22:12:42 +0000 (18:12 -0400)]
net: dsa: remove dsa_port_is_bridged
The helper is only used once and makes the code more complicated that it
should. Remove it and reorganize the variables so that it fits on 80
columns.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arjun Vynipadath [Tue, 30 May 2017 08:00:24 +0000 (13:30 +0530)]
cxgb4: Fix netdev_features flag
GRO is not supported by Chelsio HW when rx_csum is disabled.
Update the netdev features flag when rx_csum is modified.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arjun Vynipadath [Tue, 30 May 2017 12:36:06 +0000 (18:06 +0530)]
cxgb4: FW upgrade fixes
Disable FW_OK flag while flashing Firmware. This will help to fix any
potential mailbox timeouts during Firmware flash.
Grab new devlog parameters after Firmware restart. When we FLASH new
Firmware onto an adapter, the new Firmware may have the Firmware Device Log
located at a different memory address or have a different size for it.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Tue, 30 May 2017 06:20:40 +0000 (11:50 +0530)]
cxgb4: add new T5 pci device id
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Surendra Mobiya [Tue, 30 May 2017 06:02:06 +0000 (11:32 +0530)]
cxgb4: keep carrier off before registering netdev
Mark carrier off before registering netdev to ensure that vlan device
picks up the correct state of the carrier
Signed-off-by: Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 May 2017 17:57:33 +0000 (13:57 -0400)]
Merge branch 'net-qualcomm-add-QCA7000-UART-driver'
Stefan Wahren says:
====================
net: qualcomm: add QCA7000 UART driver
The Qualcomm QCA7000 HomePlug GreenPHY supports two interfaces:
UART and SPI. This patch series adds the missing support for UART.
This driver based on the Qualcomm code [1], but contains some changes:
* use random MAC address per default
* use net_device_stats from device
* share frame decoding between SPI and UART driver
* improve error handling
* reimplement tty_wakeup with work queue (based on slcan)
* use new serial device bus instead of ldisc
The patches 1 - 3 are just for clean up and are not related to
the UART support. Patch 4 adds SET_NETDEV_DEV() to qca_spi.
Patches 5 - 16 prepare the existing QCA7000 code for UART support.
The last patch contains the new driver.
The code itself has been tested on a Freescale i.MX28 board and
a Raspberry Pi Zero.
Changes in v8:
* add necessary header includes to qca_7k.c in order to reflect
dependencies
Changes in v7:
* fix race between tx workqueue and device deregistration (reported by Lino)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Wahren [Mon, 29 May 2017 11:57:25 +0000 (13:57 +0200)]
net: qualcomm: add QCA7000 UART driver
This patch adds the Ethernet over UART driver for the
Qualcomm QCA7000 HomePlug GreenPHY.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Wahren [Mon, 29 May 2017 11:57:24 +0000 (13:57 +0200)]
dt-bindings: qca7000: append UART interface to binding
This merges the serdev binding for the QCA7000 UART driver (Ethernet over
UART) into the existing document.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Wahren [Mon, 29 May 2017 11:57:23 +0000 (13:57 +0200)]
dt-bindings: slave-device: add current-speed property
This adds a new DT property to define the current baud rate of the
slave device.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Wahren [Mon, 29 May 2017 11:57:22 +0000 (13:57 +0200)]
dt-bindings: qca7000: rename binding
Before we can merge the QCA7000 UART binding the document needs to be
renamed.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>