git.osdn.net Git - android-x86/kernel.git/log

PCI: Add generic quirk for increasing D3hot delay

[ Upstream commit 62fe23df067715a21c4aef44068efe7ceaa8f627 ]

Separate the D3 delay increase functionality out of quirk_radeon_pm() into
its own function so that it can be shared with other quirks, including the
AMD Ryzen XHCI quirk that will be introduced in a followup commit.

Tweak the function name and message to indicate more clearly that the delay
relates to a D3hot-to-D0 transition.

Link: https://lore.kernel.org/r/20191127053836.31624-1-drake@endlessm.com
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx23885: Add support for AVerMedia CE310B

[ Upstream commit dc4cac67e13515835ed8081d510aa507aacb013b ]

The AVerMedia CE310B is a simple composite + S-Video + stereo audio
capture card, and uses only the CX23888 to perform all of these
functions.

I've tested both video inputs and the audio interface and confirmed that
they're all working. However, there are some issues:

* Sometimes when I switch inputs the video signal turns black and can't
  be recovered until the system is rebooted. I haven't been able to
  determine the cause of this behavior, nor have I found a solution to
  fix it or any workarounds other than rebooting.
* The card sometimes seems to have trouble syncing to the video signal,
  and some of the VBI data appears as noise at the top of the frame, but
  I assume that to be a result of my very noisy RF environment and the
  card's unshielded input traces rather than a configuration issue.

Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in

[ Upstream commit 574f29036fce385e28617547955dd6911d375025 ]

Previously quirk_paxc_bridge() was applied when the iproc driver was
built-in, but not when it was compiled as a module.

This happened because it was under #ifdef CONFIG_PCIE_IPROC_PLATFORM:
PCIE_IPROC_PLATFORM=y causes CONFIG_PCIE_IPROC_PLATFORM to be defined, but
PCIE_IPROC_PLATFORM=m causes CONFIG_PCIE_IPROC_PLATFORM_MODULE to be
defined.

Move quirk_paxc_bridge() to pcie-iproc.c and drop the #ifdef so the quirk
is always applied, whether iproc is built-in or a module.

[bhelgaas: commit log, move to pcie-iproc.c, not pcie-iproc-platform.c]
Link: https://lore.kernel.org/r/20191211174511.89713-1-wei.liu@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed

[ Upstream commit 6bb1e09c4c375db29770444f689f35f5cbe696bc ]

Cabling used to connect devices to USBH1 on RDU2 does not meet USB
spec cable quality and cable length requirements to operate at High
Speed, so limit the port to Full Speed only.

Reported-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3

[ Upstream commit cd58a174e58649426fb43d7456e5f7d7eab58af1 ]

RDU2 production units come with resistor connecting WP pin to
correpsonding GPIO DNPed for both SD card slots. Drop any WP related
configuration and mark both slots with "disable-wp".

Reported-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core

[ Upstream commit d026c96b25b7ce5df89526aad2df988d553edb4d ]

QUSB2 PHY on msm8996 doesn't work well when autosuspend by
dwc3 core using USB2PHYCFG register is enabled. One of the
issue seen is that PHY driver reports PLL lock failure and
fails phy_init() if dwc3 core has USB2 PHY suspend enabled.
Fix this by using quirks to disable USB2 PHY LPM/suspend and
dwc3 core already takes care of explicitly suspending PHY
during suspend if quirks are specified.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Link: https://lore.kernel.org/r/20191209151501.26993-1-p.pisati@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: ensure we cleanup the internal AVC counters on error in avc_insert()

[ Upstream commit d8db60cb23e49a92cf8cada3297395c7fa50fdf8 ]

Fix avc_insert() to call avc_node_kill() if we've already allocated
an AVC node and the code fails to insert the node in the cache.

Fixes: fa1aa143ac4a ("selinux: extended permissions for ioctls")
Reported-by: rsiddoji@codeaurora.org
Suggested-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm: dts: allwinner: H3: Add PMU node

[ Upstream commit 0388a110747bec0c9d9de995842bb2a03a26aae1 ]

Add the Performance Monitoring Unit (PMU) device tree node to the H3
.dtsi, which tells DT users which interrupts are triggered by PMU
overflow events on each core. The numbers come from the manual and have
been checked in U-Boot and with perf in Linux.

Tested with perf record and taskset on an OrangePi Zero.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: H6: Add PMU mode

[ Upstream commit 7aa9b9eb7d6a8fde7acbe0446444f7e3fae1fe3b ]

Add the Performance Monitoring Unit (PMU) device tree node to the H6
.dtsi, which tells DT users which interrupts are triggered by PMU
overflow events on each core. The numbers come from the manual and have
been checked in U-Boot and with perf in Linux.

Tested with perf record and taskset on a Pine H64.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: fall back to ref-walk if audit is required

[ Upstream commit 0188d5c025ca8fe756ba3193bd7d150139af5a88 ]

commit bda0be7ad994 ("security: make inode_follow_link RCU-walk aware")
passed down the rcu flag to the SELinux AVC, but failed to adjust the
test in slow_avc_audit() to also return -ECHILD on LSM_AUDIT_DATA_DENTRY.
Previously, we only returned -ECHILD if generating an audit record with
LSM_AUDIT_DATA_INODE since this was only relevant from inode_permission.
Move the handling of MAY_NOT_BLOCK to avc_audit() and its inlined
equivalent in selinux_inode_permission() immediately after we determine
that audit is required, and always fall back to ref-walk in this case.

Fixes: bda0be7ad994 ("security: make inode_follow_link RCU-walk aware")
Reported-by: Will Deacon <will@kernel.org>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: port100: Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu().

[ Upstream commit 718eae277e62a26e5862eb72a830b5e0fe37b04a ]

Convert cpu_to_le16(le16_to_cpu(frame->datalen) + len) to
use le16_add_cpu(), which is more concise and does the same thing.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/wan/fsl_ucc_hdlc: reject muram offsets above 64K

[ Upstream commit 148587a59f6b85831695e0497d9dd1af5f0495af ]

Qiang Zhao points out that these offsets get written to 16-bit
registers, and there are some QE platforms with more than 64K
muram. So it is possible that qe_muram_alloc() gives us an allocation
that can't actually be used by the hardware, so detect and reject
that.

Reported-by: Qiang Zhao <qiang.zhao@nxp.com>
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: rk808: Lower log level on optional GPIOs being not available

[ Upstream commit b8a039d37792067c1a380dc710361905724b9b2f ]

RK808 can leverage a couple of GPIOs to tweak the ramp rate during DVS
(Dynamic Voltage Scaling). These GPIOs are entirely optional but a
dev_warn() appeared when cleaning this driver to use a more up-to-date
gpiod API. At least reduce the log level to 'info' as it is totally
fine to not populate these GPIO on a hardware design.

This change is trivial but it is worth not polluting the logs during
bringup phase by having real warnings and errors sorted out
correctly.

Fixes: a13eaf02e2d6 ("regulator: rk808: make better use of the gpiod API")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20191203164709.11127-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Ensure ret is always initialized when using SOC15_WAIT_ON_RREG

[ Upstream commit a63141e31764f8daf3f29e8e2d450dcf9199d1c8 ]

Commit b0f3cd3191cd ("drm/amdgpu: remove unnecessary JPEG2.0 code from
VCN2.0") introduced a new clang warning in the vcn_v2_0_stop function:

../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: warning: variable 'r'
is used uninitialized whenever 'while' loop exits because its condition
is false [-Wsometimes-uninitialized]
        SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note:
expanded from macro 'SOC15_WAIT_ON_RREG'
                while ((tmp_ & (mask)) != (expected_value)) {   \
                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1083:6: note: uninitialized use
occurs here
        if (r)
            ^
../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1082:2: note: remove the
condition if it is always true
        SOC15_WAIT_ON_RREG(VCN, 0, mmUVD_STATUS, UVD_STATUS__IDLE, 0x7, r);
        ^
../drivers/gpu/drm/amd/amdgpu/../amdgpu/soc15_common.h:55:10: note:
expanded from macro 'SOC15_WAIT_ON_RREG'
                while ((tmp_ & (mask)) != (expected_value)) {   \
                       ^
../drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:1072:7: note: initialize the
variable 'r' to silence this warning
        int r;
             ^
              = 0
1 warning generated.

To prevent warnings like this from happening in the future, make the
SOC15_WAIT_ON_RREG macro initialize its ret variable before the while
loop that can time out. This macro's return value is always checked so
it should set ret in both the success and fail path.

Link: https://github.com/ClangBuiltLinux/linux/issues/776
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: remove 4 set but not used variable in amdgpu_atombios_get_connector_info_from_object_table

[ Upstream commit bae028e3e521e8cb8caf2cc16a455ce4c55f2332 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c: In function
'amdgpu_atombios_get_connector_info_from_object_table':
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:376:26: warning: variable
'grph_obj_num' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:376:13: warning: variable
'grph_obj_id' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:341:37: warning: variable
'con_obj_type' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:341:24: warning: variable
'con_obj_num' set but not used [-Wunused-but-set-variable]

They are never used, so can be removed.

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: rcg2: Don't crash if our parent can't be found; return an error

[ Upstream commit 908b050114d8fefdddc57ec9fbc213c3690e7f5f ]

When I got my clock parenting slightly wrong I ended up with a crash
that looked like this:

  Unable to handle kernel NULL pointer dereference at virtual
  address 0000000000000000
  ...
  pc : clk_hw_get_rate+0x14/0x44
  ...
  Call trace:
   clk_hw_get_rate+0x14/0x44
   _freq_tbl_determine_rate+0x94/0xfc
   clk_rcg2_determine_rate+0x2c/0x38
   clk_core_determine_round_nolock+0x4c/0x88
   clk_core_round_rate_nolock+0x6c/0xa8
   clk_core_round_rate_nolock+0x9c/0xa8
   clk_core_set_rate_nolock+0x70/0x180
   clk_set_rate+0x3c/0x6c
   of_clk_set_defaults+0x254/0x360
   platform_drv_probe+0x28/0xb0
   really_probe+0x120/0x2dc
   driver_probe_device+0x64/0xfc
   device_driver_attach+0x4c/0x6c
   __driver_attach+0xac/0xc0
   bus_for_each_dev+0x84/0xcc
   driver_attach+0x2c/0x38
   bus_add_driver+0xfc/0x1d0
   driver_register+0x64/0xf8
   __platform_driver_register+0x4c/0x58
   msm_drm_register+0x5c/0x60
   ...

It turned out that clk_hw_get_parent_by_index() was returning NULL and
we weren't checking.  Let's check it so that we don't crash.

Fixes: ac269395cdd8 ("clk: qcom: Convert to clk_hw based provider APIs")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lkml.kernel.org/r/20200203103049.v4.1.I7487325fe8e701a68a07d3be8a6a4b571eca9cfa@changeid
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kconfig: fix broken dependency in randconfig-generated .config

[ Upstream commit c8fb7d7e48d11520ad24808cfce7afb7b9c9f798 ]

Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5)
produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y,
which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency.

This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs
CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the
value of CONFIG_EFI is calculated.

When this happens, the has_changed flag should be set.

Currently, it takes the result from the last iteration. It should
accumulate all the results of the loop.

Fixes: 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig")
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: ENOTSUPP -> EOPNOTSUPP fixups

[ Upstream commit c611990844c28c61ca4b35ff69d3a2ae95ccd486 ]

There is no ENOTSUPP for userspace.

Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Fixes: 519783935451 ("KVM: s390: introduce ais mode modify function")
Fixes: 2c1a48f2e5ed ("KVM: S390: add new group for flic")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: add a flush_workqueue in nbd_start_device

[ Upstream commit 5c0dd228b5fc30a3b732c7ae2657e0161ec7ed80 ]

When kzalloc fail, may cause trying to destroy the
workqueue from inside the workqueue.

If num_connections is m (2 < m), and NO.1 ~ NO.n
(1 < n < m) kzalloc are successful. The NO.(n + 1)
failed. Then, nbd_start_device will return ENOMEM
to nbd_start_device_ioctl, and nbd_start_device_ioctl
will return immediately without running flush_workqueue.
However, we still have n recv threads. If nbd_release
run first, recv threads may have to drop the last
config_refs and try to destroy the workqueue from
inside the workqueue.

To fix it, add a flush_workqueue in nbd_start_device.

Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Retrain dongles when SINK_COUNT becomes non-zero

[ Upstream commit 3eb6d7aca53d81ce888624f09cd44dc0302161e8 ]

[WHY]
Two years ago the patch referenced by the Fixes tag stopped running
dp_verify_link_cap_with_retries during DP detection when the reason
for the detection was a short-pulse interrupt. This effectively meant
that we were no longer doing the verify_link_cap training on active
dongles when their SINK_COUNT changed from 0 to 1.

A year ago this was partly remedied with:
commit 80adaebd2d41 ("drm/amd/display: Don't skip link training for empty dongle")

This made sure that we trained the dongle on initial hotplug (without
connected downstream devices).

This is all fine and dandy if it weren't for the fact that there are
some dongles on the market that don't like link training when SINK_COUNT
is 0 These dongles will in fact indicate a SINK_COUNT of 0 immediately
after hotplug, even when a downstream device is connected, and then
trigger a shortpulse interrupt indicating a SINK_COUNT change to 1.

In order to play nicely we will need our policy to not link train an
active DP dongle when SINK_COUNT is 0 but ensure we train it when the
SINK_COUNT changes to 1.

[HOW]
Call dp_verify_link_cap_with_retries on detection even when the detection
is triggered from a short pulse interrupt.

With this change we can also revert this commit which we'll do in a separate
follow-up change:
commit 80adaebd2d41 ("drm/amd/display: Don't skip link training for empty dongle")

Fixes: 0301ccbaf67d ("drm/amd/display: DP Compliance 400.1.1 failure")
Suggested-by: Louis Li <Ching-shih.Li@amd.com>
Tested-by: Louis Li <Ching-shih.Li@amd.com>
Cc: Wenjing Liu <Wenjing.Liu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Correct the DMA direction for management tx buffers

[ Upstream commit 6ba8b3b6bd772f575f7736c8fd893c6981fcce16 ]

The management packets, send to firmware via WMI, are
mapped using the direction DMA_TO_DEVICE. Currently in
case of wmi cleanup, these buffers are being unmapped
using an incorrect DMA direction. This can cause unwanted
behavior when the host driver is handling a restart
of the wlan firmware.

We might see a trace like below

[<ffffff8008098b18>] __dma_inv_area+0x28/0x58
[<ffffff8001176734>] ath10k_wmi_mgmt_tx_clean_up_pending+0x60/0xb0 [ath10k_core]
[<ffffff80088c7c50>] idr_for_each+0x78/0xe4
[<ffffff80011766a4>] ath10k_wmi_detach+0x4c/0x7c [ath10k_core]
[<ffffff8001163d7c>] ath10k_core_stop+0x58/0x68 [ath10k_core]
[<ffffff800114fb74>] ath10k_halt+0xec/0x13c [ath10k_core]
[<ffffff8001165110>] ath10k_core_restart+0x11c/0x1a8 [ath10k_core]
[<ffffff80080c36bc>] process_one_work+0x16c/0x31c

Fix the incorrect DMA direction during the wmi
management tx buffer cleanup.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: dc405152bb6 ("ath10k: handle mgmt tx completion event")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4, jbd2: ensure panic when aborting with zero errno

[ Upstream commit 51f57b01e4a3c7d7bdceffd84de35144e8c538e7 ]

JBD2_REC_ERR flag used to indicate the errno has been updated when jbd2
aborted, and then __ext4_abort() and ext4_handle_error() can invoke
panic if ERRORS_PANIC is specified. But if the journal has been aborted
with zero errno, jbd2_journal_abort() didn't set this flag so we can
no longer panic. Fix this by always record the proper errno in the
journal superblock.

Fixes: 4327ba52afd03 ("ext4, jbd2: ensure entering into panic after recording an error in superblock")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8952/1: Disable kmemleak on XIP kernels

[ Upstream commit bc420c6ceefbb86cbbc8c00061bd779c17fa6997 ]

Kmemleak relies on specific symbols to register the read only data
during init (e.g. __start_ro_after_init).
Trying to build an XIP kernel on arm results in the linking error
reported below because when this option is selected read only data
after init are not allowed since .data is read only (.rodata).

  arm-linux-gnueabihf-ld: mm/kmemleak.o: in function `kmemleak_init':
  kmemleak.c:(.init.text+0x148): undefined reference to `__end_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x14c):
     undefined reference to `__end_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x150):
     undefined reference to `__start_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x156):
     undefined reference to `__start_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x162):
     undefined reference to `__start_ro_after_init'
  arm-linux-gnueabihf-ld: kmemleak.c:(.init.text+0x16a):
     undefined reference to `__start_ro_after_init'
  linux/Makefile:1078: recipe for target 'vmlinux' failed

Fix the issue enabling kmemleak only on non XIP kernels.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Fix very unlikely race of registering two stat tracers

[ Upstream commit dfb6cd1e654315168e36d947471bd2a0ccd834ae ]

Looking through old emails in my INBOX, I came across a patch from Luis
Henriques that attempted to fix a race of two stat tracers registering the
same stat trace (extremely unlikely, as this is done in the kernel, and
probably doesn't even exist). The submitted patch wasn't quite right as it
needed to deal with clean up a bit better (if two stat tracers were the
same, it would have the same files).

But to make the code cleaner, all we needed to do is to keep the
all_stat_sessions_mutex held for most of the registering function.

Link: http://lkml.kernel.org/r/1410299375-20068-1-git-send-email-luis.henriques@canonical.com
Fixes: 002bb86d8d42f ("tracing/ftrace: separate events tracing and stats tracing engine")
Reported-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Fix tracing_stat return values in error handling paths

[ Upstream commit afccc00f75bbbee4e4ae833a96c2d29a7259c693 ]

tracing_stat_init() was always returning '0', even on the error paths. It
now returns -ENODEV if tracing_init_dentry() fails or -ENOMEM if it fails
to created the 'trace_stat' debugfs directory.

Link: http://lkml.kernel.org/r/1410299381-20108-1-git-send-email-luis.henriques@canonical.com
Fixes: ed6f1c996bfe4 ("tracing: Check return value of tracing_init_dentry()")
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
[ Pulled from the archeological digging of my INBOX ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/iov: Move VF pdev fixup into pcibios_fixup_iov()

[ Upstream commit 965c94f309be58fbcc6c8d3e4f123376c5970d79 ]

An ioda_pe for each VF is allocated in pnv_pci_sriov_enable() before
the pci_dev for the VF is created. We need to set the pe->pdev pointer
at some point after the pci_dev is created. Currently we do that in:

pcibios_bus_add_device()
pnv_pci_dma_dev_setup() (via phb->ops.dma_dev_setup)
/* fixup is done here */
pnv_pci_ioda_dma_dev_setup() (via pnv_phb->dma_dev_setup)

The fixup needs to be done before setting up DMA for for the VF's PE,
but there's no real reason to delay it until this point. Move the
fixup into pnv_pci_ioda_fixup_iov() so the ordering is:

pcibios_add_device()
pnv_pci_ioda_fixup_iov() (via ppc_md.pcibios_fixup_sriov)

pcibios_bus_add_device()
...

This isn't strictly required, but it's a slightly more logical place
to do the fixup and it simplifies pnv_pci_dma_dev_setup().

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200110070207.439-4-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/pci: Fix possible deadlock in recover_store()

[ Upstream commit 576c75e36c689bec6a940e807bae27291ab0c0de ]

With zpci_disable() working, lockdep detected a potential deadlock
(lockdep output at the end).

The deadlock is between recovering a PCI function via the

/sys/bus/pci/devices/<dev>/recover

attribute vs powering it off via

/sys/bus/pci/slots/<slot>/power.

The fix is analogous to the changes in commit 0ee223b2e1f6 ("scsi: core:
Avoid that SCSI device removal through sysfs triggers a deadlock")
that fixed a potential deadlock on removing a SCSI device via sysfs.

[  204.830107] ======================================================
[  204.830109] WARNING: possible circular locking dependency detected
[  204.830111] 5.5.0-rc2-06072-gbc03ecc9a672 #6 Tainted: G        W
[  204.830112] ------------------------------------------------------
[  204.830113] bash/1034 is trying to acquire lock:
[  204.830115] 0000000192a1a610 (kn->count#200){++++}, at: kernfs_remove_by_name_ns+0x5c/0xa8
[  204.830122]
               but task is already holding lock:
[  204.830123] 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48
[  204.830128]
               which lock already depends on the new lock.

[  204.830129]
               the existing dependency chain (in reverse order) is:
[  204.830130]
               -> #1 (pci_rescan_remove_lock){+.+.}:
[  204.830134]        validate_chain+0x93a/0xd08
[  204.830136]        __lock_acquire+0x4ae/0x9d0
[  204.830137]        lock_acquire+0x114/0x280
[  204.830140]        __mutex_lock+0xa2/0x960
[  204.830142]        mutex_lock_nested+0x32/0x40
[  204.830145]        recover_store+0x4c/0xa8
[  204.830147]        kernfs_fop_write+0xe6/0x218
[  204.830151]        vfs_write+0xb0/0x1b8
[  204.830152]        ksys_write+0x6c/0xf8
[  204.830154]        system_call+0xd8/0x2d8
[  204.830155]
               -> #0 (kn->count#200){++++}:
[  204.830187]        check_noncircular+0x1e6/0x240
[  204.830189]        check_prev_add+0xfc/0xdb0
[  204.830190]        validate_chain+0x93a/0xd08
[  204.830192]        __lock_acquire+0x4ae/0x9d0
[  204.830193]        lock_acquire+0x114/0x280
[  204.830194]        __kernfs_remove.part.0+0x2e4/0x360
[  204.830196]        kernfs_remove_by_name_ns+0x5c/0xa8
[  204.830198]        remove_files.isra.0+0x4c/0x98
[  204.830199]        sysfs_remove_group+0x66/0xc8
[  204.830201]        sysfs_remove_groups+0x46/0x68
[  204.830204]        device_remove_attrs+0x52/0x90
[  204.830207]        device_del+0x182/0x418
[  204.830208]        pci_remove_bus_device+0x8a/0x130
[  204.830210]        pci_stop_and_remove_bus_device_locked+0x3a/0x48
[  204.830212]        disable_slot+0x68/0x100
[  204.830213]        power_write_file+0x7c/0x130
[  204.830215]        kernfs_fop_write+0xe6/0x218
[  204.830217]        vfs_write+0xb0/0x1b8
[  204.830218]        ksys_write+0x6c/0xf8
[  204.830220]        system_call+0xd8/0x2d8
[  204.830221]
               other info that might help us debug this:

[  204.830223]  Possible unsafe locking scenario:

[  204.830224]        CPU0                    CPU1
[  204.830225]        ----                    ----
[  204.830226]   lock(pci_rescan_remove_lock);
[  204.830227]                                lock(kn->count#200);
[  204.830229]                                lock(pci_rescan_remove_lock);
[  204.830231]   lock(kn->count#200);
[  204.830233]
                *** DEADLOCK ***

[  204.830234] 4 locks held by bash/1034:
[  204.830235]  #0: 00000001b6fbc498 (sb_writers#4){.+.+}, at: vfs_write+0x158/0x1b8
[  204.830239]  #1: 000000018c9f5090 (&of->mutex){+.+.}, at: kernfs_fop_write+0xaa/0x218
[  204.830242]  #2: 00000001f7da0810 (kn->count#235){.+.+}, at: kernfs_fop_write+0xb6/0x218
[  204.830245]  #3: 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48
[  204.830248]
               stack backtrace:
[  204.830250] CPU: 2 PID: 1034 Comm: bash Tainted: G        W         5.5.0-rc2-06072-gbc03ecc9a672 #6
[  204.830252] Hardware name: IBM 8561 T01 703 (LPAR)
[  204.830253] Call Trace:
[  204.830257]  [<00000000c05e10c0>] show_stack+0x88/0xf0
[  204.830260]  [<00000000c112dca4>] dump_stack+0xa4/0xe0
[  204.830261]  [<00000000c0694c06>] check_noncircular+0x1e6/0x240
[  204.830263]  [<00000000c0695bec>] check_prev_add+0xfc/0xdb0
[  204.830264]  [<00000000c06971da>] validate_chain+0x93a/0xd08
[  204.830266]  [<00000000c06994c6>] __lock_acquire+0x4ae/0x9d0
[  204.830267]  [<00000000c069867c>] lock_acquire+0x114/0x280
[  204.830269]  [<00000000c09ca15c>] __kernfs_remove.part.0+0x2e4/0x360
[  204.830270]  [<00000000c09cb5c4>] kernfs_remove_by_name_ns+0x5c/0xa8
[  204.830272]  [<00000000c09cee14>] remove_files.isra.0+0x4c/0x98
[  204.830274]  [<00000000c09cf2ae>] sysfs_remove_group+0x66/0xc8
[  204.830276]  [<00000000c09cf356>] sysfs_remove_groups+0x46/0x68
[  204.830278]  [<00000000c0e3dfe2>] device_remove_attrs+0x52/0x90
[  204.830280]  [<00000000c0e40382>] device_del+0x182/0x418
[  204.830281]  [<00000000c0dcfd7a>] pci_remove_bus_device+0x8a/0x130
[  204.830283]  [<00000000c0dcfe92>] pci_stop_and_remove_bus_device_locked+0x3a/0x48
[  204.830285]  [<00000000c0de7190>] disable_slot+0x68/0x100
[  204.830286]  [<00000000c0de6514>] power_write_file+0x7c/0x130
[  204.830288]  [<00000000c09cc846>] kernfs_fop_write+0xe6/0x218
[  204.830290]  [<00000000c08f3480>] vfs_write+0xb0/0x1b8
[  204.830291]  [<00000000c08f378c>] ksys_write+0x6c/0xf8
[  204.830293]  [<00000000c1154374>] system_call+0xd8/0x2d8
[  204.830294] INFO: lockdep is turned off.

Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: omap-dmtimer: Simplify error handling

[ Upstream commit c4cf7aa57eb83b108d2d9c6c37c143388fee2a4d ]

Instead of doing error handling in the middle of ->probe(), move error
handling and freeing the reference to timer to the end.

This fixes a resource leak as dm_timer wasn't freed when allocating
*omap failed.

Implementation note: The put: label was never reached without a goto and
ret being unequal to 0, so the removed return statement is fine.

Fixes: 6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/sysfb: Fix check for bad VRAM size

[ Upstream commit dacc9092336be20b01642afe1a51720b31f60369 ]

When checking whether the reported lfb_size makes sense, the height
* stride result is page-aligned before seeing whether it exceeds the
reported size.

This doesn't work if height * stride is not an exact number of pages.
For example, as reported in the kernel bugzilla below, an 800x600x32 EFI
framebuffer gets skipped because of this.

Move the PAGE_ALIGN to after the check vs size.

Reported-by: Christopher Head <chead@chead.ca>
Tested-by: Christopher Head <chead@chead.ca>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206051
Link: https://lkml.kernel.org/r/20200107230410.2291947-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

jbd2: clear JBD2_ABORT flag before journal_reset to update log tail info when load journal

[ Upstream commit a09decff5c32060639a685581c380f51b14e1fc2 ]

If the journal is dirty when the filesystem is mounted, jbd2 will replay
the journal but the journal superblock will not be updated by
journal_reset() because JBD2_ABORT flag is still set (it was set in
journal_init_common()). This is problematic because when a new transaction
is then committed, it will be recorded in block 1 (journal->j_tail was set
to 1 in journal_reset()). If unclean shutdown happens again before the
journal superblock is updated, the new recorded transaction will not be
replayed during the next mount (because of stale sb->s_start and
sb->s_sequence values) which can lead to filesystem corruption.

Fixes: 85e0c4e89c1b ("jbd2: if the journal is aborted then don't allow update of the log tail")
Signed-off-by: Kai Li <li.kai4@h3c.com>
Link: https://lore.kernel.org/r/20200111022542.5008-1-li.kai4@h3c.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest: Minimise dependency of get_size on C library interfaces

[ Upstream commit 6b64a650f0b2ae3940698f401732988699eecf7a ]

It was observed[1] on arm64 that __builtin_strlen led to an infinite
loop in the get_size selftest.  This is because __builtin_strlen (and
other builtins) may sometimes result in a call to the C library
function.  The C library implementation of strlen uses an IFUNC
resolver to load the most efficient strlen implementation for the
underlying machine and hence has a PLT indirection even for static
binaries.  Because this binary avoids the C library startup routines,
the PLT initialization never happens and hence the program gets stuck
in an infinite loop.

On x86_64 the __builtin_strlen just happens to expand inline and avoid
the call but that is not always guaranteed.

Further, while testing on x86_64 (Fedora 31), it was observed that the
test also failed with a segfault inside write() because the generated
code for the write function in glibc seems to access TLS before the
syscall (probably due to the cancellation point check) and fails
because TLS is not initialised.

To mitigate these problems, this patch reduces the interface with the
C library to just the syscall function.  The syscall function still
sets errno on failure, which is undesirable but for now it only
affects cases where syscalls fail.

[1] https://bugs.linaro.org/show_bug.cgi?id=5479

Signed-off-by: Siddhesh Poyarekar <siddhesh@gotplt.org>
Reported-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/bcm2835_timer: Fix memory leak of timer

[ Upstream commit 2052d032c06761330bca4944bb7858b00960e868 ]

Currently when setup_irq fails the error exit path will leak the
recently allocated timer structure. Originally the code would
throw a panic but a later commit changed the behaviour to return
via the err_iounmap path and hence we now have a memory leak. Fix
this by adding a err_timer_free error path that kfree's timer.

Addresses-Coverity: ("Resource Leak")
Fixes: 524a7f08983d ("clocksource/drivers/bcm2835_timer: Convert init function to return error")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191219213246.34437-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: Fix IN FIFO allocation

[ Upstream commit 644139f8b64d818f6345351455f14471510879a5 ]

On chips with fewer FIFOs than endpoints (for example RK3288 which has 9
endpoints, but only 6 which are cabable of input), the DPTXFSIZN
registers above the FIFO count may return invalid values.

With logging added on startup, I see:

dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=1 sz=256
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=2 sz=128
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=3 sz=128
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=4 sz=64
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=5 sz=64
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=6 sz=32
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=7 sz=0
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=8 sz=0
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=9 sz=0
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=10 sz=0
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=11 sz=0
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=12 sz=0
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=13 sz=0
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=14 sz=0
dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=15 sz=0

but:

# cat /sys/kernel/debug/ff580000.usb/fifo
Non-periodic FIFOs:
RXFIFO: Size 275
NPTXFIFO: Size 16, Start 0x00000113

Periodic TXFIFOs:
DPTXFIFO 1: Size 256, Start 0x00000123
DPTXFIFO 2: Size 128, Start 0x00000223
DPTXFIFO 3: Size 128, Start 0x000002a3
DPTXFIFO 4: Size 64, Start 0x00000323
DPTXFIFO 5: Size 64, Start 0x00000363
DPTXFIFO 6: Size 32, Start 0x000003a3
DPTXFIFO 7: Size 0, Start 0x000003e3
DPTXFIFO 8: Size 0, Start 0x000003a3
DPTXFIFO 9: Size 256, Start 0x00000123

so it seems that FIFO 9 is mirroring FIFO 1.

Fix the allocation by using the FIFO count instead of the endpoint count
when selecting a FIFO for an endpoint.

Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: fix possible sleep-in-atomic-context bugs in gr_probe()

[ Upstream commit 9c1ed62ae0690dfe5d5e31d8f70e70a95cb48e52 ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

drivers/usb/gadget/udc/core.c, 1175:
kzalloc(GFP_KERNEL) in usb_add_gadget_udc_release
drivers/usb/gadget/udc/core.c, 1272:
usb_add_gadget_udc_release in usb_add_gadget_udc
drivers/usb/gadget/udc/gr_udc.c, 2186:
usb_add_gadget_udc in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 2183:
spin_lock in gr_probe

drivers/usb/gadget/udc/core.c, 1195:
mutex_lock in usb_add_gadget_udc_release
drivers/usb/gadget/udc/core.c, 1272:
usb_add_gadget_udc_release in usb_add_gadget_udc
drivers/usb/gadget/udc/gr_udc.c, 2186:
usb_add_gadget_udc in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 2183:
spin_lock in gr_probe

drivers/usb/gadget/udc/gr_udc.c, 212:
debugfs_create_file in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 2197:
gr_dfs_create in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 2183:
spin_lock in gr_probe

drivers/usb/gadget/udc/gr_udc.c, 2114:
devm_request_threaded_irq in gr_request_irq
drivers/usb/gadget/udc/gr_udc.c, 2202:
gr_request_irq in gr_probe
drivers/usb/gadget/udc/gr_udc.c, 2183:
spin_lock in gr_probe

kzalloc(GFP_KERNEL), mutex_lock(), debugfs_create_file() and
devm_request_threaded_irq() can sleep at runtime.

To fix these possible bugs, usb_add_gadget_udc(), gr_dfs_create() and
gr_request_irq() are called without handling the spinlock.

These bugs are found by a static analysis tool STCheck written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()

[ Upstream commit b74351287d4bd90636c3f48bc188c2f53824c2d4 ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

kernel/irq/manage.c, 523:
synchronize_irq in disable_irq
drivers/uio/uio_dmem_genirq.c, 140:
disable_irq in uio_dmem_genirq_irqcontrol
drivers/uio/uio_dmem_genirq.c, 134:
_raw_spin_lock_irqsave in uio_dmem_genirq_irqcontrol

synchronize_irq() can sleep at runtime.

To fix this bug, disable_irq() is called without holding the spinlock.

This bug is found by a static analysis tool STCheck written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20191218094405.6009-1-baijiaju1990@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sparc: Add .exit.data section.

[ Upstream commit 548f0b9a5f4cffa0cecf62eb12aa8db682e4eee6 ]

This fixes build errors of all sorts.

Also, emit .exit.text unconditionally.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Loongson: Fix potential NULL dereference in loongson3_platform_init()

[ Upstream commit 72d052e28d1d2363f9107be63ef3a3afdea6143c ]

If kzalloc fails, it should return -ENOMEM, otherwise may trigger a NULL
pointer dereference.

Fixes: 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/x86: Map the entire EFI vendor string before copying it

[ Upstream commit ffc2760bcf2dba0dbef74013ed73eea8310cc52c ]

Fix a couple of issues with the way we map and copy the vendor string:
- we map only 2 bytes, which usually works since you get at least a
  page, but if the vendor string happens to cross a page boundary,
  a crash will result
- only call early_memunmap() if early_memremap() succeeded, or we will
  call it with a NULL address which it doesn't like,
- while at it, switch to early_memremap_ro(), and array indexing rather
  than pointer dereferencing to read the CHAR16 characters.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Fixes: 5b83683f32b1 ("x86: EFI runtime service support")
Link: https://lkml.kernel.org/r/20200103113953.9571-5-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins

[ Upstream commit a23680594da7a9e2696dbcf4f023e9273e2fa40b ]

Suspending Goodix touchscreens requires changing the interrupt pin to
output before sending them a power-down command. Followed by wiggling
the interrupt pin to wake the device up, after which it is put back
in input mode.

On Bay Trail devices with a Goodix touchscreen direct-irq mode is used
in combination with listing the pin as a normal GpioIo resource.

This works fine, until the goodix driver gets rmmod-ed and then insmod-ed
again. In this case byt_gpio_disable_free() calls
byt_gpio_clear_triggering() which clears the IRQ flags and after that the
(direct) IRQ no longer triggers.

This commit fixes this by adding a check for the BYT_DIRECT_IRQ_EN flag
to byt_gpio_clear_triggering().

Note that byt_gpio_clear_triggering() only gets called from
byt_gpio_disable_free() for direct-irq enabled pins, as these are excluded
from the irq_valid mask by byt_init_irq_valid_mask().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run()

[ Upstream commit bb6d42061a05d71dd73f620582d9e09c8fbf7f5b ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

drivers/media/platform/sti/bdisp/bdisp-hw.c, 385:
    msleep in bdisp_hw_reset
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 341:
    bdisp_hw_reset in bdisp_device_run
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 317:
    _raw_spin_lock_irqsave in bdisp_device_run

To fix this bug, msleep() is replaced with udelay().

This bug is found by a static analysis tool STCheck written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

char/random: silence a lockdep splat with printk()

[ Upstream commit 1b710b1b10eff9d46666064ea25f079f70bc67a8 ]

Sergey didn't like the locking order,

uart_port->lock  ->  tty_port->lock

uart_write (uart_port->lock)
  __uart_start
    pl011_start_tx
      pl011_tx_chars
        uart_write_wakeup
          tty_port_tty_wakeup
            tty_port_default
              tty_port_tty_get (tty_port->lock)

but those code is so old, and I have no clue how to de-couple it after
checking other locks in the splat. There is an onging effort to make all
printk() as deferred, so until that happens, workaround it for now as a
short-term fix.

LTP: starting iogen01 (export LTPROOT; rwtest -N iogen01 -i 120s -s
read,write -Da -Dv -n 2 500b:$TMPDIR/doio.f1.$$
1000b:$TMPDIR/doio.f2.$$)
WARNING: possible circular locking dependency detected
------------------------------------------------------
doio/49441 is trying to acquire lock:
ffff008b7cff7290 (&(&zone->lock)->rlock){..-.}, at: rmqueue+0x138/0x2050

but task is already holding lock:
60ff000822352818 (&pool->lock/1){-.-.}, at: start_flush_work+0xd8/0x3f0

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #4 (&pool->lock/1){-.-.}:
       lock_acquire+0x320/0x360
       _raw_spin_lock+0x64/0x80
       __queue_work+0x4b4/0xa10
       queue_work_on+0xac/0x11c
       tty_schedule_flip+0x84/0xbc
       tty_flip_buffer_push+0x1c/0x28
       pty_write+0x98/0xd0
       n_tty_write+0x450/0x60c
       tty_write+0x338/0x474
       __vfs_write+0x88/0x214
       vfs_write+0x12c/0x1a4
       redirected_tty_write+0x90/0xdc
       do_loop_readv_writev+0x140/0x180
       do_iter_write+0xe0/0x10c
       vfs_writev+0x134/0x1cc
       do_writev+0xbc/0x130
       __arm64_sys_writev+0x58/0x8c
       el0_svc_handler+0x170/0x240
       el0_sync_handler+0x150/0x250
       el0_sync+0x164/0x180

  -> #3 (&(&port->lock)->rlock){-.-.}:
       lock_acquire+0x320/0x360
       _raw_spin_lock_irqsave+0x7c/0x9c
       tty_port_tty_get+0x24/0x60
       tty_port_default_wakeup+0x1c/0x3c
       tty_port_tty_wakeup+0x34/0x40
       uart_write_wakeup+0x28/0x44
       pl011_tx_chars+0x1b8/0x270
       pl011_start_tx+0x24/0x70
       __uart_start+0x5c/0x68
       uart_write+0x164/0x1c8
       do_output_char+0x33c/0x348
       n_tty_write+0x4bc/0x60c
       tty_write+0x338/0x474
       redirected_tty_write+0xc0/0xdc
       do_loop_readv_writev+0x140/0x180
       do_iter_write+0xe0/0x10c
       vfs_writev+0x134/0x1cc
       do_writev+0xbc/0x130
       __arm64_sys_writev+0x58/0x8c
       el0_svc_handler+0x170/0x240
       el0_sync_handler+0x150/0x250
       el0_sync+0x164/0x180

  -> #2 (&port_lock_key){-.-.}:
       lock_acquire+0x320/0x360
       _raw_spin_lock+0x64/0x80
       pl011_console_write+0xec/0x2cc
       console_unlock+0x794/0x96c
       vprintk_emit+0x260/0x31c
       vprintk_default+0x54/0x7c
       vprintk_func+0x218/0x254
       printk+0x7c/0xa4
       register_console+0x734/0x7b0
       uart_add_one_port+0x734/0x834
       pl011_register_port+0x6c/0xac
       sbsa_uart_probe+0x234/0x2ec
       platform_drv_probe+0xd4/0x124
       really_probe+0x250/0x71c
       driver_probe_device+0xb4/0x200
       __device_attach_driver+0xd8/0x188
       bus_for_each_drv+0xbc/0x110
       __device_attach+0x120/0x220
       device_initial_probe+0x20/0x2c
       bus_probe_device+0x54/0x100
       device_add+0xae8/0xc2c
       platform_device_add+0x278/0x3b8
       platform_device_register_full+0x238/0x2ac
       acpi_create_platform_device+0x2dc/0x3a8
       acpi_bus_attach+0x390/0x3cc
       acpi_bus_attach+0x108/0x3cc
       acpi_bus_attach+0x108/0x3cc
       acpi_bus_attach+0x108/0x3cc
       acpi_bus_scan+0x7c/0xb0
       acpi_scan_init+0xe4/0x304
       acpi_init+0x100/0x114
       do_one_initcall+0x348/0x6a0
       do_initcall_level+0x190/0x1fc
       do_basic_setup+0x34/0x4c
       kernel_init_freeable+0x19c/0x260
       kernel_init+0x18/0x338
       ret_from_fork+0x10/0x18

  -> #1 (console_owner){-...}:
       lock_acquire+0x320/0x360
       console_lock_spinning_enable+0x6c/0x7c
       console_unlock+0x4f8/0x96c
       vprintk_emit+0x260/0x31c
       vprintk_default+0x54/0x7c
       vprintk_func+0x218/0x254
       printk+0x7c/0xa4
       get_random_u64+0x1c4/0x1dc
       shuffle_pick_tail+0x40/0xac
       __free_one_page+0x424/0x710
       free_one_page+0x70/0x120
       __free_pages_ok+0x61c/0xa94
       __free_pages_core+0x1bc/0x294
       memblock_free_pages+0x38/0x48
       __free_pages_memory+0xcc/0xfc
       __free_memory_core+0x70/0x78
       free_low_memory_core_early+0x148/0x18c
       memblock_free_all+0x18/0x54
       mem_init+0xb4/0x17c
       mm_init+0x14/0x38
       start_kernel+0x19c/0x530

  -> #0 (&(&zone->lock)->rlock){..-.}:
       validate_chain+0xf6c/0x2e2c
       __lock_acquire+0x868/0xc2c
       lock_acquire+0x320/0x360
       _raw_spin_lock+0x64/0x80
       rmqueue+0x138/0x2050
       get_page_from_freelist+0x474/0x688
       __alloc_pages_nodemask+0x3b4/0x18dc
       alloc_pages_current+0xd0/0xe0
       alloc_slab_page+0x2b4/0x5e0
       new_slab+0xc8/0x6bc
       ___slab_alloc+0x3b8/0x640
       kmem_cache_alloc+0x4b4/0x588
       __debug_object_init+0x778/0x8b4
       debug_object_init_on_stack+0x40/0x50
       start_flush_work+0x16c/0x3f0
       __flush_work+0xb8/0x124
       flush_work+0x20/0x30
       xlog_cil_force_lsn+0x88/0x204 [xfs]
       xfs_log_force_lsn+0x128/0x1b8 [xfs]
       xfs_file_fsync+0x3c4/0x488 [xfs]
       vfs_fsync_range+0xb0/0xd0
       generic_write_sync+0x80/0xa0 [xfs]
       xfs_file_buffered_aio_write+0x66c/0x6e4 [xfs]
       xfs_file_write_iter+0x1a0/0x218 [xfs]
       __vfs_write+0x1cc/0x214
       vfs_write+0x12c/0x1a4
       ksys_write+0xb0/0x120
       __arm64_sys_write+0x54/0x88
       el0_svc_handler+0x170/0x240
       el0_sync_handler+0x150/0x250
       el0_sync+0x164/0x180

       other info that might help us debug this:

Chain exists of:
   &(&zone->lock)->rlock --> &(&port->lock)->rlock --> &pool->lock/1

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&pool->lock/1);
                               lock(&(&port->lock)->rlock);
                               lock(&pool->lock/1);
  lock(&(&zone->lock)->rlock);

                *** DEADLOCK ***

4 locks held by doio/49441:
#0: a0ff00886fc27408 (sb_writers#8){.+.+}, at: vfs_write+0x118/0x1a4
#1: 8fff00080810dfe0 (&xfs_nondir_ilock_class){++++}, at:
xfs_ilock+0x2a8/0x300 [xfs]
#2: ffff9000129f2390 (rcu_read_lock){....}, at:
rcu_lock_acquire+0x8/0x38
#3: 60ff000822352818 (&pool->lock/1){-.-.}, at:
start_flush_work+0xd8/0x3f0

               stack backtrace:
CPU: 48 PID: 49441 Comm: doio Tainted: G        W
Hardware name: HPE Apollo 70             /C01_APACHE_MB         , BIOS
L50_5.13_1.11 06/18/2019
Call trace:
dump_backtrace+0x0/0x248
show_stack+0x20/0x2c
dump_stack+0xe8/0x150
print_circular_bug+0x368/0x380
check_noncircular+0x28c/0x294
validate_chain+0xf6c/0x2e2c
__lock_acquire+0x868/0xc2c
lock_acquire+0x320/0x360
_raw_spin_lock+0x64/0x80
rmqueue+0x138/0x2050
get_page_from_freelist+0x474/0x688
__alloc_pages_nodemask+0x3b4/0x18dc
alloc_pages_current+0xd0/0xe0
alloc_slab_page+0x2b4/0x5e0
new_slab+0xc8/0x6bc
___slab_alloc+0x3b8/0x640
kmem_cache_alloc+0x4b4/0x588
__debug_object_init+0x778/0x8b4
debug_object_init_on_stack+0x40/0x50
start_flush_work+0x16c/0x3f0
__flush_work+0xb8/0x124
flush_work+0x20/0x30
xlog_cil_force_lsn+0x88/0x204 [xfs]
xfs_log_force_lsn+0x128/0x1b8 [xfs]
xfs_file_fsync+0x3c4/0x488 [xfs]
vfs_fsync_range+0xb0/0xd0
generic_write_sync+0x80/0xa0 [xfs]
xfs_file_buffered_aio_write+0x66c/0x6e4 [xfs]
xfs_file_write_iter+0x1a0/0x218 [xfs]
__vfs_write+0x1cc/0x214
vfs_write+0x12c/0x1a4
ksys_write+0xb0/0x120
__arm64_sys_write+0x54/0x88
el0_svc_handler+0x170/0x240
el0_sync_handler+0x150/0x250
el0_sync+0x164/0x180

Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/1573679785-21068-1-git-send-email-cai@lca.pw
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix off-by-one in PASID allocation

[ Upstream commit 39d630e332144028f56abba83d94291978e72df1 ]

PASID allocator uses IDR which is exclusive for the end of the
allocation range. There is no need to decrement pasid_max.

Fixes: af39507305fb ("iommu/vt-d: Apply global PASID in SVA")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: gpio-grgpio: fix possible sleep-in-atomic-context bugs in grgpio_irq_map/unmap()

[ Upstream commit e36eaf94be8f7bc4e686246eed3cf92d845e2ef8 ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

drivers/gpio/gpio-grgpio.c, 261:
request_irq in grgpio_irq_map
drivers/gpio/gpio-grgpio.c, 255:
_raw_spin_lock_irqsave in grgpio_irq_map

drivers/gpio/gpio-grgpio.c, 318:
free_irq in grgpio_irq_unmap
drivers/gpio/gpio-grgpio.c, 299:
_raw_spin_lock_irqsave in grgpio_irq_unmap

request_irq() and free_irq() can sleep at runtime.

To fix these bugs, request_irq() and free_irq() are called without
holding the spinlock.

These bugs are found by a static analysis tool STCheck written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20191218132605.10594-1-baijiaju1990@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/powernv/iov: Ensure the pdn for VFs always contains a valid PE number

[ Upstream commit 3b5b9997b331e77ce967eba2c4bc80dc3134a7fe ]

On pseries there is a bug with adding hotplugged devices to an IOMMU
group. For a number of dumb reasons fixing that bug first requires
re-working how VFs are configured on PowerNV. For background, on
PowerNV we use the pcibios_sriov_enable() hook to do two things:

  1. Create a pci_dn structure for each of the VFs, and
  2. Configure the PHB's internal BARs so the MMIO range for each VF
     maps to a unique PE.

Roughly speaking a PE is the hardware counterpart to a Linux IOMMU
group since all the devices in a PE share the same IOMMU table. A PE
also defines the set of devices that should be isolated in response to
a PCI error (i.e. bad DMA, UR/CA, AER events, etc). When isolated all
MMIO and DMA traffic to and from devicein the PE is blocked by the
root complex until the PE is recovered by the OS.

The requirement to block MMIO causes a giant headache because the P8
PHB generally uses a fixed mapping between MMIO addresses and PEs. As
a result we need to delay configuring the IOMMU groups for device
until after MMIO resources are assigned. For physical devices (i.e.
non-VFs) the PE assignment is done in pcibios_setup_bridge() which is
called immediately after the MMIO resources for downstream
devices (and the bridge's windows) are assigned. For VFs the setup is
more complicated because:

  a) pcibios_setup_bridge() is not called again when VFs are activated, and
  b) The pci_dev for VFs are created by generic code which runs after
     pcibios_sriov_enable() is called.

The work around for this is a two step process:

  1. A fixup in pcibios_add_device() is used to initialised the cached
     pe_number in pci_dn, then
  2. A bus notifier then adds the device to the IOMMU group for the PE
     specified in pci_dn->pe_number.

A side effect fixing the pseries bug mentioned in the first paragraph
is moving the fixup out of pcibios_add_device() and into
pcibios_bus_add_device(), which is called much later. This results in
step 2. failing because pci_dn->pe_number won't be initialised when
the bus notifier is run.

We can fix this by removing the need for the fixup. The PE for a VF is
known before the VF is even scanned so we can initialise
pci_dn->pe_number pcibios_sriov_enable() instead. Unfortunately,
moving the initialisation causes two problems:

  1. We trip the WARN_ON() in the current fixup code, and
  2. The EEH core clears pdn->pe_number when recovering a VF and
     relies on the fixup to correctly re-set it.

The only justification for either of these is a comment in
eeh_rmv_device() suggesting that pdn->pe_number *must* be set to
IODA_INVALID_PE in order for the VF to be scanned. However, this
comment appears to have no basis in reality. Both bugs can be fixed by
just deleting the code.

Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191028085424.12006-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: mt9v032: fix enum mbus codes and frame sizes

[ Upstream commit 1451d5ae351d938a0ab1677498c893f17b9ee21d ]

This driver supports both the mt9v032 (color) and the mt9v022 (mono)
sensors. Depending on which sensor is used, the format from the sensor is
different. The format.code inside the dev struct holds this information.
The enum mbus and enum frame sizes need to take into account both type of
sensors, not just the color one. To solve this, use the format.code in
these functions instead of the hardcoded bayer color format (which is only
used for mt9v032).

[Sakari Ailus: rewrapped commit message]

Suggested-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pxa168fb: Fix the function used to release some memory in an error handling path

[ Upstream commit 3c911fe799d1c338d94b78e7182ad452c37af897 ]

In the probe function, some resources are allocated using 'dma_alloc_wc()',
they should be released with 'dma_free_wc()', not 'dma_free_coherent()'.

We already use 'dma_free_wc()' in the remove function, but not in the
error handling path of the probe function.

Also, remove a useless 'PAGE_ALIGN()'. 'info->fix.smem_len' is already
PAGE_ALIGNed.

Fixes: 638772c7553f ("fb: add support of LCD display controller on pxa168/910 (base layer)")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
CC: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190831100024.3248-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs

[ Upstream commit 55b1cb1f03ad5eea39897d0c74035e02deddcff2 ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
two CAN outputs.

Fix this by:
  - Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010
    configures the combined "CTX0&CTX1" output signal,
  - Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures
    the shared "CRX0/CRX1" input signal, which is fed to both CAN
    inputs,
  - Adding the missing function GPIO definition for "CTX0&CTX1" to
    pinmux_func_gpios[],
  - Moving all CAN enums next to each other.

See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00:
  [1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte
      Version),
  [2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte
      Version,
  [3] Table 1.4 List of Pins,
  [4] Figure 20.29 Connection Example when Using This Module as 1-Channel
      Module (64 Mailboxes x 1 Channel),
  [5] Table 32.10 Multiplexed Pins (Port J),
  [6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0).

Note that the last 2 disagree about PJ2MD[2:0], which is probably the
root cause of this bug.  But considering [4], "CTx0&CTx1" in [5] must
be correct, and "CRx0&CRx1" in [6] must be wrong.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

gianfar: Fix TX timestamping with a stacked DSA driver

[ Upstream commit c26a2c2ddc0115eb088873f5c309cf46b982f522 ]

The driver wrongly assumes that it is the only entity that can set the
SKBTX_IN_PROGRESS bit of the current skb. Therefore, in the
gfar_clean_tx_ring function, where the TX timestamp is collected if
necessary, the aforementioned bit is used to discriminate whether or not
the TX timestamp should be delivered to the socket's error queue.

But a stacked driver such as a DSA switch can also set the
SKBTX_IN_PROGRESS bit, which is actually exactly what it should do in
order to denote that the hardware timestamping process is undergoing.

Therefore, gianfar would misinterpret the "in progress" bit as being its
own, and deliver a second skb clone in the socket's error queue,
completely throwing off a PTP process which is not expecting to receive
it, _even though_ TX timestamping is not enabled for gianfar.

There have been discussions [0] as to whether non-MAC drivers need or
not to set SKBTX_IN_PROGRESS at all (whose purpose is to avoid sending 2
timestamps, a sw and a hw one, to applications which only expect one).
But as of this patch, there are at least 2 PTP drivers that would break
in conjunction with gianfar: the sja1105 DSA switch and the felix
switch, by way of its ocelot core driver.

So regardless of that conclusion, fix the gianfar driver to not do stuff
based on flags set by others and not intended for it.

[0]: https://www.spinics.net/lists/netdev/msg619699.html

Fixes: f0ee7acfcdd4 ("gianfar: Add hardware TX timestamping support")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: ctl: allow TLV read operation for callback type of element in locked case

[ Upstream commit d61fe22c2ae42d9fd76c34ef4224064cca4b04b0 ]

A design of ALSA control core allows applications to execute three
operations for TLV feature; read, write and command. Furthermore, it
allows driver developers to process the operations by two ways; allocated
array or callback function. In the former, read operation is just allowed,
thus developers uses the latter when device driver supports variety of
models or the target model is expected to dynamically change information
stored in TLV container.

The core also allows applications to lock any element so that the other
applications can't perform write operation to the element for element
value and TLV information. When the element is locked, write and command
operation for TLV information are prohibited as well as element value.
Any read operation should be allowed in the case.

At present, when an element has callback function for TLV information,
TLV read operation returns EPERM if the element is locked. On the
other hand, the read operation is success when an element has allocated
array for TLV information. In both cases, read operation is success for
element value expectedly.

This commit fixes the bug. This change can be backported to v4.14
kernel or later.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20191223093347.15279-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix ext4_dax_read/write inode locking sequence for IOCB_NOWAIT

[ Upstream commit f629afe3369e9885fd6e9cc7a4f514b6a65cf9e9 ]

Apparently our current rwsem code doesn't like doing the trylock, then
lock for real scheme. So change our dax read/write methods to just do the
trylock for the RWF_NOWAIT case.
This seems to fix AIM7 regression in some scalable filesystems upto ~25%
in some cases. Claimed in commit 942491c9e6d6 ("xfs: fix AIM7 regression")

Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20191212055557.11151-2-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: pca963x: Fix open-drain initialization

[ Upstream commit 697529091ac7a0a90ca349b914bb30641c13c753 ]

Before commit bb29b9cccd95 ("leds: pca963x: Add bindings to invert
polarity") Mode register 2 was initialized directly with either 0x01
or 0x05 for open-drain or totem pole (push-pull) configuration.

Afterwards, MODE2 initialization started using bitwise operations on
top of the default MODE2 register value (0x05). Using bitwise OR for
setting OUTDRV with 0x01 and 0x05 does not produce correct results.
When open-drain is used, instead of setting OUTDRV to 0, the driver
keeps it as 1:

Open-drain: 0x05 | 0x01 -> 0x05 (0b101 - incorrect)
Totem pole: 0x05 | 0x05 -> 0x05 (0b101 - correct but still wrong)

Now OUTDRV setting uses correct bitwise operations for initialization:

Open-drain: 0x05 & ~0x04 -> 0x01 (0b001 - correct)
Totem pole: 0x05 | 0x04 -> 0x05 (0b101 - correct)

Additional MODE2 register definitions are introduced now as well.

Fixes: bb29b9cccd95 ("leds: pca963x: Add bindings to invert polarity")
Signed-off-by: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: Fix use after free in brcmf_sdio_readframes()

[ Upstream commit 216b44000ada87a63891a8214c347e05a4aea8fe ]

The brcmu_pkt_buf_free_skb() function frees "pkt" so it leads to a
static checker warning:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1974 brcmf_sdio_readframes()
error: dereferencing freed memory 'pkt'

It looks like there was supposed to be a continue after we free "pkt".

Fixes: 4754fceeb9a6 ("brcmfmac: streamline SDIO read frame routine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpu/hotplug, stop_machine: Fix stop_machine vs hotplug order

[ Upstream commit 45178ac0cea853fe0e405bf11e101bdebea57b15 ]

Paul reported a very sporadic, rcutorture induced, workqueue failure.
When the planets align, the workqueue rescuer's self-migrate fails and
then triggers a WARN for running a work on the wrong CPU.

Tejun then figured that set_cpus_allowed_ptr()'s stop_one_cpu() call
could be ignored! When stopper->enabled is false, stop_machine will
insta complete the work, without actually doing the work. Worse, it
will not WARN about this (we really should fix this).

It turns out there is a small window where a freshly online'ed CPU is
marked 'online' but doesn't yet have the stopper task running:

BP AP

bringup_cpu()
  __cpu_up(cpu, idle) --> start_secondary()
...
cpu_startup_entry()
  bringup_wait_for_ap()
    wait_for_ap_thread() <--   cpuhp_online_idle()
  while (1)
    do_idle()

... available to run kthreads ...

    stop_machine_unpark()
      stopper->enable = true;

Close this by moving the stop_machine_unpark() into
cpuhp_online_idle(), such that the stopper thread is ready before we
start the idle loop and schedule.

Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Debugged-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/gma500: Fixup fbdev stolen size usage evaluation

[ Upstream commit fd1a5e521c3c083bb43ea731aae0f8b95f12b9bd ]

psbfb_probe performs an evaluation of the required size from the stolen
GTT memory, but gets it wrong in two distinct ways:
- The resulting size must be page-size-aligned;
- The size to allocate is derived from the surface dimensions, not the fb
dimensions.

When two connectors are connected with different modes, the smallest will
be stored in the fb dimensions, but the size that needs to be allocated must
match the largest (surface) dimensions. This is what is used in the actual
allocation code.

Fix this by correcting the evaluation to conform to the two points above.
It allows correctly switching to 16bpp when one connector is e.g. 1920x1080
and the other is 1024x768.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107153048.843881-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: nVMX: Use correct root level for nested EPT shadow page tables

[ Upstream commit 148d735eb55d32848c3379e460ce365f2c1cbe4b ]

Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU
currently also hardcodes the page walk level for nested EPT to be 4
levels. The L2 guest is all but guaranteed to soft hang on its first
instruction when L1 is using EPT, as KVM will construct 4-level page
tables and then tell hardware to use 5-level page tables.

Fixes: 855feb673640 ("KVM: MMU: Add 5 level EPT & Shadow page table support.")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "KVM: VMX: Add non-canonical check on writes to RTIT address MSRs"

This reverts commit 57211b7366cc2abf784c35e537b256e7fcddc91e.

This patch isn't needed on 4.19 and older.

Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "KVM: nVMX: Use correct root level for nested EPT shadow page tables"

This reverts commit 740d876bd9565857a695ce7c05efda4eba5bc585.

Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: flower: add missing validation of TCA_FLOWER_FLAGS

[ Upstream commit e2debf0852c4d66ba1a8bde12869b196094c70a7 ]

unlike other classifiers that can be offloaded (i.e. users can set flags
like 'skip_hw' and 'skip_sw'), 'cls_flower' doesn't validate the size of
netlink attribute 'TCA_FLOWER_FLAGS' provided by user: add a proper entry
to fl_policy.

Fixes: 5b33f48842fa ("net/flower: Introduce hardware offload support")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS

[ Upstream commit 1afa3cc90f8fb745c777884d79eaa1001d6927a6 ]

unlike other classifiers that can be offloaded (i.e. users can set flags
like 'skip_hw' and 'skip_sw'), 'cls_matchall' doesn't validate the size
of netlink attribute 'TCA_MATCHALL_FLAGS' provided by user: add a proper
entry to mall_policy.

Fixes: b87f7936a932 ("net/sched: Add match-all classifier hw offloading.")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: tag_qca: Make sure there is headroom for tag

[ Upstream commit 04fb91243a853dbde216d829c79d9632e52aa8d9 ]

Passing tag size to skb_cow_head will make sure
there is enough headroom for the tag data.
This change does not introduce any overhead in case there
is already available headroom for tag.

Signed-off-by: Per Forlin <perfn@axis.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: fix leak of kernel memory to user space

[ Upstream commit 457fed775c97ac2c0cd1672aaf2ff2c8a6235e87 ]

As nlmsg_put() does not clear the memory that is reserved,
it this the caller responsability to make sure all of this
memory will be written, in order to not reveal prior content.

While we are at it, we can provide the socket cookie even
if clsock is not set.

syzbot reported :

BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline]
BUG: KMSAN: uninit-value in __swab32p include/uapi/linux/swab.h:179 [inline]
BUG: KMSAN: uninit-value in __be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
BUG: KMSAN: uninit-value in get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
BUG: KMSAN: uninit-value in bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252
CPU: 1 PID: 5262 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
__arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
__fswab32 include/uapi/linux/swab.h:59 [inline]
__swab32p include/uapi/linux/swab.h:179 [inline]
__be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
kmsan_kmalloc_large+0x73/0xc0 mm/kmsan/kmsan_hooks.c:128
kmalloc_large_node_hook mm/slub.c:1406 [inline]
kmalloc_large_node+0x282/0x2c0 mm/slub.c:3841
__kmalloc_node_track_caller+0x44b/0x1200 mm/slub.c:4368
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
netlink_dump+0x44b/0x1ab0 net/netlink/af_netlink.c:2224
__netlink_dump_start+0xbb2/0xcf0 net/netlink/af_netlink.c:2352
netlink_dump_start include/linux/netlink.h:233 [inline]
smc_diag_handler_dump+0x2ba/0x300 net/smc/smc_diag.c:242
sock_diag_rcv_msg+0x211/0x610 net/core/sock_diag.c:256
netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:275
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg net/socket.c:659 [inline]
kernel_sendmsg+0x433/0x440 net/socket.c:679
sock_no_sendpage+0x235/0x300 net/core/sock.c:2740
kernel_sendpage net/socket.c:3776 [inline]
sock_sendpage+0x1e1/0x2c0 net/socket.c:937
pipe_to_sendpage+0x38c/0x4c0 fs/splice.c:458
splice_from_pipe_feed fs/splice.c:512 [inline]
__splice_from_pipe+0x539/0xed0 fs/splice.c:636
splice_from_pipe fs/splice.c:671 [inline]
generic_splice_sendpage+0x1d5/0x2d0 fs/splice.c:844
do_splice_from fs/splice.c:863 [inline]
do_splice fs/splice.c:1170 [inline]
__do_sys_splice fs/splice.c:1447 [inline]
__se_sys_splice+0x2380/0x3350 fs/splice.c:1427
__x64_sys_splice+0x6e/0x90 fs/splice.c:1427
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

enic: prevent waking up stopped tx queues over watchdog reset

[ Upstream commit 0f90522591fd09dd201065c53ebefdfe3c6b55cb ]

Recent months, our customer reported several kernel crashes all
preceding with following message:
NETDEV WATCHDOG: eth2 (enic): transmit queue 0 timed out
Error message of one of those crashes:
BUG: unable to handle kernel paging request at ffffffffa007e090

After analyzing severl vmcores, I found that most of crashes are
caused by memory corruption. And all the corrupted memory areas
are overwritten by data of network packets. Moreover, I also found
that the tx queues were enabled over watchdog reset.

After going through the source code, I found that in enic_stop(),
the tx queues stopped by netif_tx_disable() could be woken up over
a small time window between netif_tx_disable() and the
napi_disable() by the following code path:
napi_poll->
  enic_poll_msix_wq->
     vnic_cq_service->
        enic_wq_service->
           netif_wake_subqueue(enic->netdev, q_number)->
              test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state)
In turn, upper netowrk stack could queue skb to ENIC NIC though
enic_hard_start_xmit(). And this might introduce some race condition.

Our customer comfirmed that this kind of kernel crash doesn't occur over
90 days since they applied this patch.

Signed-off-by: Firo Yang <firo.yang@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

core: Don't skip generic XDP program execution for cloned SKBs

[ Upstream commit ad1e03b2b3d4430baaa109b77bc308dc73050de3 ]

The current generic XDP handler skips execution of XDP programs entirely if
an SKB is marked as cloned. This leads to some surprising behaviour, as
packets can end up being cloned in various ways, which will make an XDP
program not see all the traffic on an interface.

This was discovered by a simple test case where an XDP program that always
returns XDP_DROP is installed on a veth device. When combining this with
the Scapy packet sniffer (which uses an AF_PACKET) socket on the sending
side, SKBs reliably end up in the cloned state, causing them to be passed
through to the receiving interface instead of being dropped. A minimal
reproducer script for this is included below.

This patch fixed the issue by simply triggering the existing linearisation
code for cloned SKBs instead of skipping the XDP program execution. This
behaviour is in line with the behaviour of the native XDP implementation
for the veth driver, which will reallocate and copy the SKB data if the SKB
is marked as shared.

Reproducer Python script (requires BCC and Scapy):

from scapy.all import TCP, IP, Ether, sendp, sniff, AsyncSniffer, Raw, UDP
from bcc import BPF
import time, sys, subprocess, shlex

SKB_MODE = (1 << 1)
DRV_MODE = (1 << 2)
PYTHON=sys.executable

def client():
    time.sleep(2)
    # Sniffing on the sender causes skb_cloned() to be set
    s = AsyncSniffer()
    s.start()

    for p in range(10):
        sendp(Ether(dst="aa:aa:aa:aa:aa:aa", src="cc:cc:cc:cc:cc:cc")/IP()/UDP()/Raw("Test"),
              verbose=False)
        time.sleep(0.1)

    s.stop()
    return 0

def server(mode):
    prog = BPF(text="int dummy_drop(struct xdp_md *ctx) {return XDP_DROP;}")
    func = prog.load_func("dummy_drop", BPF.XDP)
    prog.attach_xdp("a_to_b", func, mode)

    time.sleep(1)

    s = sniff(iface="a_to_b", count=10, timeout=15)
    if len(s):
        print(f"Got {len(s)} packets - should have gotten 0")
        return 1
    else:
        print("Got no packets - as expected")
        return 0

if len(sys.argv) < 2:
    print(f"Usage: {sys.argv[0]} <skb|drv>")
    sys.exit(1)

if sys.argv[1] == "client":
    sys.exit(client())
elif sys.argv[1] == "server":
    mode = SKB_MODE if sys.argv[2] == 'skb' else DRV_MODE
    sys.exit(server(mode))
else:
    try:
        mode = sys.argv[1]
        if mode not in ('skb', 'drv'):
            print(f"Usage: {sys.argv[0]} <skb|drv>")
            sys.exit(1)
        print(f"Running in {mode} mode")

        for cmd in [
                'ip netns add netns_a',
                'ip netns add netns_b',
                'ip -n netns_a link add a_to_b type veth peer name b_to_a netns netns_b',
                # Disable ipv6 to make sure there's no address autoconf traffic
                'ip netns exec netns_a sysctl -qw net.ipv6.conf.a_to_b.disable_ipv6=1',
                'ip netns exec netns_b sysctl -qw net.ipv6.conf.b_to_a.disable_ipv6=1',
                'ip -n netns_a link set dev a_to_b address aa:aa:aa:aa:aa:aa',
                'ip -n netns_b link set dev b_to_a address cc:cc:cc:cc:cc:cc',
                'ip -n netns_a link set dev a_to_b up',
                'ip -n netns_b link set dev b_to_a up']:
            subprocess.check_call(shlex.split(cmd))

        server = subprocess.Popen(shlex.split(f"ip netns exec netns_a {PYTHON} {sys.argv[0]} server {mode}"))
        client = subprocess.Popen(shlex.split(f"ip netns exec netns_b {PYTHON} {sys.argv[0]} client"))

        client.wait()
        server.wait()
        sys.exit(server.returncode)

    finally:
        subprocess.run(shlex.split("ip netns delete netns_a"))
        subprocess.run(shlex.split("ip netns delete netns_b"))

Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices")
Reported-by: Stepan Horacek <shoracek@redhat.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.105

KVM: x86/mmu: Fix struct guest_walker arrays for 5-level paging

[ Upstream commit f6ab0107a4942dbf9a5cf0cca3f37e184870a360 ]

Define PT_MAX_FULL_LEVELS as PT64_ROOT_MAX_LEVEL, i.e. 5, to fix shadow
paging for 5-level guest page tables. PT_MAX_FULL_LEVELS is used to
size the arrays that track guest pages table information, i.e. using a
"max levels" of 4 causes KVM to access garbage beyond the end of an
array when querying state for level 5 entries. E.g. FNAME(gpte_changed)
will read garbage and most likely return %true for a level 5 entry,
soft-hanging the guest because FNAME(fetch) will restart the guest
instead of creating SPTEs because it thinks the guest PTE has changed.

Note, KVM doesn't yet support 5-level nested EPT, so PT_MAX_FULL_LEVELS
gets to stay "4" for the PTTYPE_EPT case.

Fixes: 855feb673640 ("KVM: MMU: Add 5 level EPT & Shadow page table support.")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer

[ Upstream commit c96dceeabf765d0b1b1f29c3bf50a5c01315b820 ]

Commit 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from
an older transaction") set the BH_Freed flag when forgetting a metadata
buffer which belongs to the committing transaction, it indicate the
committing process clear dirty bits when it is done with the buffer. But
it also clear the BH_Mapped flag at the same time, which may trigger
below NULL pointer oops when block_size < PAGE_SIZE.

rmdir 1             kjournald2                 mkdir 2
                    jbd2_journal_commit_transaction
    commit transaction N
jbd2_journal_forget
set_buffer_freed(bh1)
                    jbd2_journal_commit_transaction
                     commit transaction N+1
                     ...
                     clear_buffer_mapped(bh1)
                                               ext4_getblk(bh2 ummapped)
                                               ...
                                               grow_dev_page
                                                init_page_buffers
                                                 bh1->b_private=NULL
                                                 bh2->b_private=NULL
                     jbd2_journal_put_journal_head(jh1)
                      __journal_remove_journal_head(hb1)
       jh1 is NULL and trigger oops

*) Dir entry block bh1 and bh2 belongs to one page, and the bh2 has
   already been unmapped.

For the metadata buffer we forgetting, we should always keep the mapped
flag and clear the dirty flags is enough, so this patch pick out the
these buffers and keep their BH_Mapped flag.

Link: https://lore.kernel.org/r/20200213063821.30455-3-yi.zhang@huawei.com
Fixes: 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()

[ Upstream commit 6a66a7ded12baa6ebbb2e3e82f8cb91382814839 ]

There is no need to delay the clearing of b_modified flag to the
transaction committing time when unmapping the journalled buffer, so
just move it to the journal_unmap_buffer().

Link: https://lore.kernel.org/r/20200213063821.30455-2-yi.zhang@huawei.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.1 make cachethis=no for writes

commit cd1b659d8ce7697ee9799b64f887528315b9097b upstream.

Turning caching off for writes on the server should improve performance.

Fixes: fba83f34119a ("NFS: Pass "privileged" value to nfs4_init_sequence()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.

commit cf2b012c90e74e85d8aea7d67e48868069cfee0c upstream.

Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to
bits 6/5. This fixs a LTC297X family bug where polling always returns
not busy even when the part is busy. This fixes a LTC388X and
LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was
not polled, which can lead to NACKing of commands. LTC388X and
LTM467X modules now poll BUSY and PEND, increasing reliability by
eliminating NACKing of commands.

Signed-off-by: Mike Jones <michael-a1.jones@analog.com>
Link: https://lore.kernel.org/r/1580234400-2829-2-git-send-email-michael-a1.jones@analog.com
Fixes: e04d1ce9bbb49 ("hwmon: (ltc2978) Add polling for chips requiring it")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Fix inaccurate period in context switch for auto-reload

commit f861854e1b435b27197417f6f90d87188003cb24 upstream.

Perf doesn't take the left period into account when auto-reload is
enabled with fixed period sampling mode in context switch.

Here is the MSR trace of the perf command as below.
(The MSR trace is simplified from a ftrace log.)

    #perf record -e cycles:p -c 2000000 -- ./triad_loop

      //The MSR trace of task schedule out
      //perf disable all counters, disable PEBS, disable GP counter 0,
      //read GP counter 0, and re-enable all counters.
      //The counter 0 stops at 0xfffffff82840
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
      write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
      write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
      rdpmc: 0, value fffffff82840
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff

      //The MSR trace of the same task schedule in again
      //perf disable all counters, enable and set GP counter 0,
      //enable PEBS, and re-enable all counters.
      //0xffffffe17b80 (-2000000) is written to GP counter 0.
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
      write_msr: MSR_IA32_PMC0(4c1), value ffffffe17b80
      write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
      write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff

When the same task schedule in again, the counter should starts from
previous left. However, it starts from the fixed period -2000000 again.

A special variant of intel_pmu_save_and_restart() is used for
auto-reload, which doesn't update the hwc->period_left.
When the monitored task schedules in again, perf doesn't know the left
period. The fixed period is used, which is inaccurate.

With auto-reload, the counter always has a negative counter value. So
the left period is -value. Update the period_left in
intel_pmu_save_and_restart_reload().

With the patch:

      //The MSR trace of task schedule out
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
      write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
      write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
      rdpmc: 0, value ffffffe25cbc
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff

      //The MSR trace of the same task schedule in again
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
      write_msr: MSR_IA32_PMC0(4c1), value ffffffe25cbc
      write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
      write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
      write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff

Fixes: d31fc13fdcb2 ("perf/x86/intel: Fix event update for auto-reload")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200121190125.3389-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/time: Fix clk type in get_tod_clock

commit 0f8a206df7c920150d2aa45574fba0ab7ff6be4f upstream.

Clang warns:

In file included from ../arch/s390/boot/startup.c:3:
In file included from ../include/linux/elf.h:5:
In file included from ../arch/s390/include/asm/elf.h:132:
In file included from ../include/linux/compat.h:10:
In file included from ../include/linux/time.h:74:
In file included from ../include/linux/time32.h:13:
In file included from ../include/linux/timex.h:65:
../arch/s390/include/asm/timex.h:160:20: warning: passing 'unsigned char
[16]' to parameter of type 'char *' converts between pointers to integer
types with different sign [-Wpointer-sign]
        get_tod_clock_ext(clk);
                          ^~~
../arch/s390/include/asm/timex.h:149:44: note: passing argument to
parameter 'clk' here
static inline void get_tod_clock_ext(char *clk)
                                           ^

Change clk's type to just be char so that it matches what happens in
get_tod_clock_ext.

Fixes: 57b28f66316d ("[S390] s390_hypfs: Add new attributes")
Link: https://github.com/ClangBuiltLinux/linux/issues/861
Link: http://lkml.kernel.org/r/20200208140858.47970-1-natechancellor@gmail.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/core: Fix protection fault in get_pkey_idx_qp_list

commit 1dd017882e01d2fcd9c5dbbf1eb376211111c393 upstream.

We don't need to set pkey as valid in case that user set only one of pkey
index or port number, otherwise it will be resulted in NULL pointer
dereference while accessing to uninitialized pkey list.  The following
crash from Syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP KASAN PTI
  CPU: 1 PID: 14753 Comm: syz-executor.2 Not tainted 5.5.0-rc5 #2
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:get_pkey_idx_qp_list+0x161/0x2d0
  Code: 01 00 00 49 8b 5e 20 4c 39 e3 0f 84 b9 00 00 00 e8 e4 42 6e fe 48
  8d 7b 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04
  02 84 c0 74 08 3c 01 0f 8e d0 00 00 00 48 8d 7d 04 48 b8
  RSP: 0018:ffffc9000bc6f950 EFLAGS: 00010202
  RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff82c8bdec
  RDX: 0000000000000002 RSI: ffffc900030a8000 RDI: 0000000000000010
  RBP: ffff888112c8ce80 R08: 0000000000000004 R09: fffff5200178df1f
  R10: 0000000000000001 R11: fffff5200178df1f R12: ffff888115dc4430
  R13: ffff888115da8498 R14: ffff888115dc4410 R15: ffff888115da8000
  FS:  00007f20777de700(0000) GS:ffff88811b100000(0000)
  knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000001b2f721000 CR3: 00000001173ca002 CR4: 0000000000360ee0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   port_pkey_list_insert+0xd7/0x7c0
   ib_security_modify_qp+0x6fa/0xfc0
   _ib_modify_qp+0x8c4/0xbf0
   modify_qp+0x10da/0x16d0
   ib_uverbs_modify_qp+0x9a/0x100
   ib_uverbs_write+0xaa5/0xdf0
   __vfs_write+0x7c/0x100
   vfs_write+0x168/0x4a0
   ksys_write+0xc8/0x200
   do_syscall_64+0x9c/0x390
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs")
Link: https://lore.kernel.org/r/20200212080651.GB679970@unreal
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Message-Id: <20200212080651.GB679970@unreal>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/rxe: Fix soft lockup problem due to using tasklets in softirq

commit 8ac0e6641c7ca14833a2a8c6f13d8e0a435e535c upstream.

When run stress tests with RXE, the following Call Traces often occur

  watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [swapper/2:0]
  ...
  Call Trace:
  <IRQ>
  create_object+0x3f/0x3b0
  kmem_cache_alloc_node_trace+0x129/0x2d0
  __kmalloc_reserve.isra.52+0x2e/0x80
  __alloc_skb+0x83/0x270
  rxe_init_packet+0x99/0x150 [rdma_rxe]
  rxe_requester+0x34e/0x11a0 [rdma_rxe]
  rxe_do_task+0x85/0xf0 [rdma_rxe]
  tasklet_action_common.isra.21+0xeb/0x100
  __do_softirq+0xd0/0x298
  irq_exit+0xc5/0xd0
  smp_apic_timer_interrupt+0x68/0x120
  apic_timer_interrupt+0xf/0x20
  </IRQ>
  ...

The root cause is that tasklet is actually a softirq. In a tasklet
handler, another softirq handler is triggered. Usually these softirq
handlers run on the same cpu core. So this will cause "soft lockup Bug".

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200212072635.682689-8-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/hfi1: Fix memory leak in _dev_comp_vect_mappings_create

commit 8a4f300b978edbbaa73ef9eca660e45eb9f13873 upstream.

Make sure to free the allocated cpumask_var_t's to avoid the following
reported memory leak by kmemleak:

$ cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8897f812d6a8 (size 8):
  comm "kworker/1:1", pid 347, jiffies 4294751400 (age 101.703s)
  hex dump (first 8 bytes):
    00 00 00 00 00 00 00 00                          ........
  backtrace:
    [<00000000bff49664>] alloc_cpumask_var_node+0x4c/0xb0
    [<0000000075d3ca81>] hfi1_comp_vectors_set_up+0x20f/0x800 [hfi1]
    [<0000000098d420df>] hfi1_init_dd+0x3311/0x4960 [hfi1]
    [<0000000071be7e52>] init_one+0x25e/0xf10 [hfi1]
    [<000000005483d4c2>] local_pci_probe+0xd4/0x180
    [<000000007c3cbc6e>] work_for_cpu_fn+0x51/0xa0
    [<000000001d626905>] process_one_work+0x8f0/0x17b0
    [<000000007e569e7e>] worker_thread+0x536/0xb50
    [<00000000fd39a4a5>] kthread+0x30c/0x3d0
    [<0000000056f2edb3>] ret_from_fork+0x3a/0x50

Fixes: 5d18ee67d4c1 ("IB/{hfi1, rdmavt, qib}: Implement CQ completion vector support")
Link: https://lore.kernel.org/r/20200205110530.12129-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/core: Fix invalid memory access in spec_filter_size

commit a72f4ac1d778f7bde93dfee69bfc23377ec3d74f upstream.

Add a check that the size specified in the flow spec header doesn't cause
an overflow when calculating the filter size, and thus prevent access to
invalid memory.  The following crash from syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP KASAN PTI
  CPU: 1 PID: 17834 Comm: syz-executor.3 Not tainted 5.5.0-rc5 #2
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:memchr_inv+0xd3/0x330
  Code: 89 f9 89 f5 83 e1 07 0f 85 f9 00 00 00 49 89 d5 49 c1 ed 03 45 85
  ed 74 6f 48 89 d9 48 b8 00 00 00 00 00 fc ff df 48 c1 e9 03 <80> 3c 01
  00 0f 85 0d 02 00 00 44 0f b6 e5 48 b8 01 01 01 01 01 01
  RSP: 0018:ffffc9000a13fa50 EFLAGS: 00010202
  RAX: dffffc0000000000 RBX: 7fff88810de9d820 RCX: 0ffff11021bd3b04
  RDX: 000000000000fff8 RSI: 0000000000000000 RDI: 7fff88810de9d820
  RBP: 0000000000000000 R08: ffff888110d69018 R09: 0000000000000009
  R10: 0000000000000001 R11: ffffed10236267cc R12: 0000000000000004
  R13: 0000000000001fff R14: ffff88810de9d820 R15: 0000000000000040
  FS:  00007f9ee0e51700(0000) GS:ffff88811b100000(0000)
  knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 0000000115ea0006 CR4: 0000000000360ee0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   spec_filter_size.part.16+0x34/0x50
   ib_uverbs_kern_spec_to_ib_spec_filter+0x691/0x770
   ib_uverbs_ex_create_flow+0x9ea/0x1b40
   ib_uverbs_write+0xaa5/0xdf0
   __vfs_write+0x7c/0x100
   vfs_write+0x168/0x4a0
   ksys_write+0xc8/0x200
   do_syscall_64+0x9c/0x390
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x465b49
  Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89
  f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
  f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007f9ee0e50c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000465b49
  RDX: 00000000000003a0 RSI: 00000000200007c0 RDI: 0000000000000004
  RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ee0e516bc
  R13: 00000000004ca2da R14: 000000000070deb8 R15: 00000000ffffffff
  Modules linked in:
  Dumping ftrace buffer:
     (ftrace buffer empty)

Fixes: 94e03f11ad1f ("IB/uverbs: Add support for flow tag")
Link: https://lore.kernel.org/r/20200126171500.4623-1-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/rdmavt: Reset all QPs when the device is shut down

commit f92e48718889b3d49cee41853402aa88cac84a6b upstream.

When the hfi1 device is shut down during a system reboot, it is possible
that some QPs might have not not freed by ULPs. More requests could be
post sent and a lingering timer could be triggered to schedule more packet
sends, leading to a crash:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000102
  IP: [ffffffff810a65f2] __queue_work+0x32/0x3c0
  PGD 0
  Oops: 0000 1 SMP
  Modules linked in: nvmet_rdma(OE) nvmet(OE) nvme(OE) dm_round_robin nvme_rdma(OE) nvme_fabrics(OE) nvme_core(OE) pal_raw(POE) pal_pmt(POE) pal_cache(POE) pal_pile(POE) pal(POE) pal_compatible(OE) rpcrdma sunrpc ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx4_ib sb_edac edac_core intel_powerclamp coretemp intel_rapl iosf_mbi kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support mxm_wmi ipmi_ssif pcspkr ses enclosure joydev scsi_transport_sas i2c_i801 sg mei_me lpc_ich mei ioatdma shpchp ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter acpi_pad dm_multipath hangcheck_timer ip_tables ext4 mbcache jbd2 mlx4_en
  sd_mod crc_t10dif crct10dif_generic mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm mlx4_core crct10dif_pclmul crct10dif_common hfi1(OE) igb crc32c_intel rdmavt(OE) ahci ib_core libahci libata ptp megaraid_sas pps_core dca i2c_algo_bit i2c_core devlink dm_mirror dm_region_hash dm_log dm_mod
  CPU: 23 PID: 0 Comm: swapper/23 Tainted: P OE ------------ 3.10.0-693.el7.x86_64 #1
  Hardware name: Intel Corporation S2600CWR/S2600CWR, BIOS SE5C610.86B.01.01.0028.121720182203 12/17/2018
  task: ffff8808f4ec4f10 ti: ffff8808f4ed8000 task.ti: ffff8808f4ed8000
  RIP: 0010:[ffffffff810a65f2] [ffffffff810a65f2] __queue_work+0x32/0x3c0
  RSP: 0018:ffff88105df43d48 EFLAGS: 00010046
  RAX: 0000000000000086 RBX: 0000000000000086 RCX: 0000000000000000
  RDX: ffff880f74e758b0 RSI: 0000000000000000 RDI: 000000000000001f
  RBP: ffff88105df43d80 R08: ffff8808f3c583c8 R09: ffff8808f3c58000
  R10: 0000000000000002 R11: ffff88105df43da8 R12: ffff880f74e758b0
  R13: 000000000000001f R14: 0000000000000000 R15: ffff88105a300000
  FS: 0000000000000000(0000) GS:ffff88105df40000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000102 CR3: 00000000019f2000 CR4: 00000000001407e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Stack:
  ffff88105b6dd708 0000001f00000286 0000000000000086 ffff88105a300000
  ffff880f74e75800 0000000000000000 ffff88105a300000 ffff88105df43d98
  ffffffff810a6b85 ffff88105a301e80 ffff88105df43dc8 ffffffffc0224cde
  Call Trace:
  IRQ

  [ffffffff810a6b85] queue_work_on+0x45/0x50
  [ffffffffc0224cde] _hfi1_schedule_send+0x6e/0xc0 [hfi1]
  [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt]
  [ffffffffc0224d62] hfi1_schedule_send+0x32/0x70 [hfi1]
  [ffffffffc0170644] rvt_rc_timeout+0xd4/0x120 [rdmavt]
  [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt]
  [ffffffff81097316] call_timer_fn+0x36/0x110
  [ffffffffc0170570] ? get_map_page+0x60/0x60 [rdmavt]
  [ffffffff8109982d] run_timer_softirq+0x22d/0x310
  [ffffffff81090b3f] __do_softirq+0xef/0x280
  [ffffffff816b6a5c] call_softirq+0x1c/0x30
  [ffffffff8102d3c5] do_softirq+0x65/0xa0
  [ffffffff81090ec5] irq_exit+0x105/0x110
  [ffffffff816b76c2] smp_apic_timer_interrupt+0x42/0x50
  [ffffffff816b5c1d] apic_timer_interrupt+0x6d/0x80
  EOI

  [ffffffff81527a02] ? cpuidle_enter_state+0x52/0xc0
  [ffffffff81527b48] cpuidle_idle_call+0xd8/0x210
  [ffffffff81034fee] arch_cpu_idle+0xe/0x30
  [ffffffff810e7bca] cpu_startup_entry+0x14a/0x1c0
  [ffffffff81051af6] start_secondary+0x1b6/0x230
  Code: 89 e5 41 57 41 56 49 89 f6 41 55 41 89 fd 41 54 49 89 d4 53 48 83 ec 10 89 7d d4 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 be 02 00 00 41 f6 86 02 01 00 00 01 0f 85 58 02 00 00 49 c7 c7 28 19 01 00
  RIP [ffffffff810a65f2] __queue_work+0x32/0x3c0
  RSP ffff88105df43d48
  CR2: 0000000000000102

The solution is to reset the QPs before the device resources are freed.
This reset will change the QP state to prevent post sends and delete
timers to prevent callbacks.

Fixes: 0acb0cc7ecc1 ("IB/rdmavt: Initialize and teardown of qpn table")
Link: https://lore.kernel.org/r/20200210131040.87408.38161.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Close window for pq and request coliding

commit be8638344c70bf492963ace206a9896606b6922d upstream.

Cleaning up a pq can result in the following warning and panic:

  WARNING: CPU: 52 PID: 77418 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0
  list_del corruption, ffff88cb2c6ac068->next is LIST_POISON1 (dead000000000100)
  Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel ast aesni_intel ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev lpc_ich mei_me drm_panel_orientation_quirks i2c_i801 mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables
   nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci i2c_algo_bit libahci dca ptp libata pps_core crc32c_intel [last unloaded: i2c_algo_bit]
  CPU: 52 PID: 77418 Comm: pvbatch Kdump: loaded Tainted: G           OE  ------------   3.10.0-957.38.3.el7.x86_64 #1
  Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019
  Call Trace:
   [<ffffffff90365ac0>] dump_stack+0x19/0x1b
   [<ffffffff8fc98b78>] __warn+0xd8/0x100
   [<ffffffff8fc98bff>] warn_slowpath_fmt+0x5f/0x80
   [<ffffffff8ff970c3>] __list_del_entry+0x63/0xd0
   [<ffffffff8ff9713d>] list_del+0xd/0x30
   [<ffffffff8fddda70>] kmem_cache_destroy+0x50/0x110
   [<ffffffffc0328130>] hfi1_user_sdma_free_queues+0xf0/0x200 [hfi1]
   [<ffffffffc02e2350>] hfi1_file_close+0x70/0x1e0 [hfi1]
   [<ffffffff8fe4519c>] __fput+0xec/0x260
   [<ffffffff8fe453fe>] ____fput+0xe/0x10
   [<ffffffff8fcbfd1b>] task_work_run+0xbb/0xe0
   [<ffffffff8fc2bc65>] do_notify_resume+0xa5/0xc0
   [<ffffffff90379134>] int_signal+0x12/0x17
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
  IP: [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300
  PGD 2cdab19067 PUD 2f7bfdb067 PMD 0
  Oops: 0000 [#1] SMP
  Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel ast aesni_intel ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev lpc_ich mei_me drm_panel_orientation_quirks i2c_i801 mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables
   nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci i2c_algo_bit libahci dca ptp libata pps_core crc32c_intel [last unloaded: i2c_algo_bit]
  CPU: 52 PID: 77418 Comm: pvbatch Kdump: loaded Tainted: G        W  OE  ------------   3.10.0-957.38.3.el7.x86_64 #1
  Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019
  task: ffff88cc26db9040 ti: ffff88b5393a8000 task.ti: ffff88b5393a8000
  RIP: 0010:[<ffffffff8fe1f93e>]  [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300
  RSP: 0018:ffff88b5393abd60  EFLAGS: 00010287
  RAX: 0000000000000000 RBX: ffff88cb2c6ac000 RCX: 0000000000000003
  RDX: 0000000000000400 RSI: 0000000000000400 RDI: ffffffff9095b800
  RBP: ffff88b5393abdb0 R08: ffffffff9095b808 R09: ffffffff8ff77c19
  R10: ffff88b73ce1f160 R11: ffffddecddde9800 R12: ffff88cb2c6ac000
  R13: 000000000000000c R14: ffff88cf3fdca780 R15: 0000000000000000
  FS:  00002aaaaab52500(0000) GS:ffff88b73ce00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000010 CR3: 0000002d27664000 CR4: 00000000007607e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:
   [<ffffffff8fe20d44>] __kmem_cache_shutdown+0x14/0x80
   [<ffffffff8fddda78>] kmem_cache_destroy+0x58/0x110
   [<ffffffffc0328130>] hfi1_user_sdma_free_queues+0xf0/0x200 [hfi1]
   [<ffffffffc02e2350>] hfi1_file_close+0x70/0x1e0 [hfi1]
   [<ffffffff8fe4519c>] __fput+0xec/0x260
   [<ffffffff8fe453fe>] ____fput+0xe/0x10
   [<ffffffff8fcbfd1b>] task_work_run+0xbb/0xe0
   [<ffffffff8fc2bc65>] do_notify_resume+0xa5/0xc0
   [<ffffffff90379134>] int_signal+0x12/0x17
  Code: 00 00 ba 00 04 00 00 0f 4f c2 3d 00 04 00 00 89 45 bc 0f 84 e7 01 00 00 48 63 45 bc 49 8d 04 c4 48 89 45 b0 48 8b 80 c8 00 00 00 <48> 8b 78 10 48 89 45 c0 48 83 c0 10 48 89 45 d0 48 8b 17 48 39
  RIP  [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300
   RSP <ffff88b5393abd60>
  CR2: 0000000000000010

The panic is the result of slab entries being freed during the destruction
of the pq slab.

The code attempts to quiesce the pq, but looking for n_req == 0 doesn't
account for new requests.

Fix the issue by using SRCU to get a pq pointer and adjust the pq free
logic to NULL the fd pq pointer prior to the quiesce.

Fixes: e87473bc1b6c ("IB/hfi1: Only set fd pointer when base context is completely initialized")
Link: https://lore.kernel.org/r/20200210131033.87408.81174.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Acquire lock to release TID entries when user file is closed

commit a70ed0f2e6262e723ae8d70accb984ba309eacc2 upstream.

Each user context is allocated a certain number of RcvArray (TID)
entries and these entries are managed through TID groups. These groups
are put into one of three lists in each user context: tid_group_list,
tid_used_list, and tid_full_list, depending on the number of used TID
entries within each group. When TID packets are expected, one or more
TID groups will be allocated. After the packets are received, the TID
groups will be freed. Since multiple user threads may access the TID
groups simultaneously, a mutex exp_mutex is used to synchronize the
access. However, when the user file is closed, it tries to release
all TID groups without acquiring the mutex first, which risks a race
condition with another thread that may be releasing its TID groups,
leading to data corruption.

This patch addresses the issue by acquiring the mutex first before
releasing the TID groups when the file is closed.

Fixes: 3abb33ac6521 ("staging/hfi1: Add TID cache receive init and free funcs")
Link: https://lore.kernel.org/r/20200210131026.87408.86853.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info

commit f25372ffc3f6c2684b57fb718219137e6ee2b64c upstream.

nvme fw-activate operation will get bellow warning log,
fix it by update the parameter order

[ 113.231513] nvme nvme0: Get FW SLOT INFO log error

Fixes: 0e98719b0e4b ("nvme: simplify the API for getting log pages")
Reported-by: Sujith Pandel <sujith_pandel@dell.com>
Reviewed-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/amd: Add missing L2 misses event spec to AMD Family 17h's event map

commit 25d387287cf0330abf2aad761ce6eee67326a355 upstream.

Commit 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h"),
claimed L2 misses were unsupported, due to them not being found in its
referenced documentation, whose link has now moved [1].

That old documentation listed PMCx064 unit mask bit 3 as:

    "LsRdBlkC: LS Read Block C S L X Change to X Miss."

and bit 0 as:

    "IcFillMiss: IC Fill Miss"

We now have new public documentation [2] with improved descriptions, that
clearly indicate what events those unit mask bits represent:

Bit 3 now clearly states:

    "LsRdBlkC: Data Cache Req Miss in L2 (all types)"

and bit 0 is:

    "IcFillMiss: Instruction Cache Req Miss in L2."

So we can now add support for L2 misses in perf's genericised events as
PMCx064 with both the above unit masks.

[1] The commit's original documentation reference, "Processor Programming
    Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors",
    originally available here:

        https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf

    is now available here:

        https://developer.amd.com/wordpress/media/2017/11/54945_PPR_Family_17h_Models_00h-0Fh.pdf

[2] "Processor Programming Reference (PPR) for Family 17h Model 31h,
    Revision B0 Processors", available here:

https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdf

Fixes: 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h")
Reported-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200121171232.28839-1-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Use correct root level for nested EPT shadow page tables

commit 148d735eb55d32848c3379e460ce365f2c1cbe4b upstream.

Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU
currently also hardcodes the page walk level for nested EPT to be 4
levels. The L2 guest is all but guaranteed to soft hang on its first
instruction when L1 is using EPT, as KVM will construct 4-level page
tables and then tell hardware to use 5-level page tables.

Fixes: 855feb673640 ("KVM: MMU: Add 5 level EPT & Shadow page table support.")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: ssbs: Fix context-switch when SSBS is present on all CPUs

commit fca3d33d8ad61eb53eca3ee4cac476d1e31b9008 upstream.

When all CPUs in the system implement the SSBS extension, the SSBS field
in PSTATE is the definitive indication of the mitigation state. Further,
when the CPUs implement the SSBS manipulation instructions (advertised
to userspace via an HWCAP), EL0 can toggle the SSBS field directly and
so we cannot rely on any shadow state such as TIF_SSBD at all.

Avoid forcing the SSBS field in context-switch on such a system, and
simply rely on the PSTATE register instead.

Cc: <stable@vger.kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Srinivas Ramana <sramana@codeaurora.org>
Fixes: cbdf8a189a66 ("arm64: Force SSBS on context switch")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: npcm: Bring back GPIOLIB support

commit e383e871ab54f073c2a798a9e0bde7f1d0528de8 upstream.

The CONFIG_ARCH_REQUIRE_GPIOLIB is gone since commit 65053e1a7743
("gpio: delete ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB") and all platforms
should explicitly select GPIOLIB to have it.

Link: https://lore.kernel.org/r/20200130195525.4525-1-krzk@kernel.org
Cc: <stable@vger.kernel.org>
Fixes: 65053e1a7743 ("gpio: delete ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: log message when rw remount is attempted with unclean tree-log

commit 10a3a3edc5b89a8cd095bc63495fb1e0f42047d9 upstream.

A remount to a read-write filesystem is not safe when there's tree-log
to be replayed. Files that could be opened until now might be affected
by the changes in the tree-log.

A regular mount is needed to replay the log so the filesystem presents
the consistent view with the pending changes included.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: print message when tree-log replay starts

commit e8294f2f6aa6208ed0923aa6d70cea3be178309a upstream.

There's no logged information about tree-log replay although this is
something that points to previous unclean unmount. Other filesystems
report that as well.

Suggested-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: ref-verify: fix memory leaks

commit f311ade3a7adf31658ed882aaab9f9879fdccef7 upstream.

In btrfs_ref_tree_mod(), 'ref' and 'ra' are allocated through kzalloc() and
kmalloc(), respectively. In the following code, if an error occurs, the
execution will be redirected to 'out' or 'out_unlock' and the function will
be exited. However, on some of the paths, 'ref' and 'ra' are not
deallocated, leading to memory leaks. For example, if 'action' is
BTRFS_ADD_DELAYED_EXTENT, add_block_entry() will be invoked. If the return
value indicates an error, the execution will be redirected to 'out'. But,
'ref' is not deallocated on this path, causing a memory leak.

To fix the above issues, deallocate both 'ref' and 'ra' before exiting from
the function when an error is encountered.

CC: stable@vger.kernel.org # 4.15+
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix race between using extent maps and merging them

commit ac05ca913e9f3871126d61da275bfe8516ff01ca upstream.

We have a few cases where we allow an extent map that is in an extent map
tree to be merged with other extents in the tree. Such cases include the
unpinning of an extent after the respective ordered extent completed or
after logging an extent during a fast fsync. This can lead to subtle and
dangerous problems because when doing the merge some other task might be
using the same extent map and as consequence see an inconsistent state of
the extent map - for example sees the new length but has seen the old start
offset.

With luck this triggers a BUG_ON(), and not some silent bug, such as the
following one in __do_readpage():

  $ cat -n fs/btrfs/extent_io.c
  3061  static int __do_readpage(struct extent_io_tree *tree,
  3062                           struct page *page,
  (...)
  3127                  em = __get_extent_map(inode, page, pg_offset, cur,
  3128                                        end - cur + 1, get_extent, em_cached);
  3129                  if (IS_ERR_OR_NULL(em)) {
  3130                          SetPageError(page);
  3131                          unlock_extent(tree, cur, end);
  3132                          break;
  3133                  }
  3134                  extent_offset = cur - em->start;
  3135                  BUG_ON(extent_map_end(em) <= cur);
  (...)

Consider the following example scenario, where we end up hitting the
BUG_ON() in __do_readpage().

We have an inode with a size of 8KiB and 2 extent maps:

  extent A: file offset 0, length 4KiB, disk_bytenr = X, persisted on disk by
            a previous transaction

  extent B: file offset 4KiB, length 4KiB, disk_bytenr = X + 4KiB, not yet
            persisted but writeback started for it already. The extent map
    is pinned since there's writeback and an ordered extent in
    progress, so it can not be merged with extent map A yet

The following sequence of steps leads to the BUG_ON():

1) The ordered extent for extent B completes, the respective page gets its
   writeback bit cleared and the extent map is unpinned, at that point it
   is not yet merged with extent map A because it's in the list of modified
   extents;

2) Due to memory pressure, or some other reason, the MM subsystem releases
   the page corresponding to extent B - btrfs_releasepage() is called and
   returns 1, meaning the page can be released as it's not dirty, not under
   writeback anymore and the extent range is not locked in the inode's
   iotree. However the extent map is not released, either because we are
   not in a context that allows memory allocations to block or because the
   inode's size is smaller than 16MiB - in this case our inode has a size
   of 8KiB;

3) Task B needs to read extent B and ends up __do_readpage() through the
   btrfs_readpage() callback. At __do_readpage() it gets a reference to
   extent map B;

4) Task A, doing a fast fsync, calls clear_em_loggin() against extent map B
   while holding the write lock on the inode's extent map tree - this
   results in try_merge_map() being called and since it's possible to merge
   extent map B with extent map A now (the extent map B was removed from
   the list of modified extents), the merging begins - it sets extent map
   B's start offset to 0 (was 4KiB), but before it increments the map's
   length to 8KiB (4kb + 4KiB), task A is at:

   BUG_ON(extent_map_end(em) <= cur);

   The call to extent_map_end() sees the extent map has a start of 0
   and a length still at 4KiB, so it returns 4KiB and 'cur' is 4KiB, so
   the BUG_ON() is triggered.

So it's dangerous to modify an extent map that is in the tree, because some
other task might have got a reference to it before and still using it, and
needs to see a consistent map while using it. Generally this is very rare
since most paths that lookup and use extent maps also have the file range
locked in the inode's iotree. The fsync path is pretty much the only
exception where we don't do it to avoid serialization with concurrent
reads.

Fix this by not allowing an extent map do be merged if if it's being used
by tasks other then the one attempting to merge the extent map (when the
reference count of the extent map is greater than 2).

Reported-by: ryusuke1925 <st13s20@gm.ibaraki-ct.ac.jp>
Reported-by: Koki Mitani <koki.mitani.xg@hco.ntt.co.jp>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206211
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: improve explanation of a mount failure caused by a misconfigured kernel

commit d65d87a07476aa17df2dcb3ad18c22c154315bec upstream.

If CONFIG_QFMT_V2 is not enabled, but CONFIG_QUOTA is enabled, when a
user tries to mount a file system with the quota or project quota
enabled, the kernel will emit a very confusing messsage:

EXT4-fs warning (device vdc): ext4_enable_quotas:5914: Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix.
EXT4-fs (vdc): mount failed

We will now report an explanatory message indicating which kernel
configuration options have to be enabled, to avoid customer/sysadmin
confusion.

Link: https://lore.kernel.org/r/20200215012738.565735-1-tytso@mit.edu
Google-Bug-Id: 149093531
Fixes: 7c319d328505b778 ("ext4: make quota as first class supported feature")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add cond_resched() to ext4_protect_reserved_inode

commit af133ade9a40794a37104ecbcc2827c0ea373a3c upstream.

When journal size is set too big by "mkfs.ext4 -J size=", or when
we mount a crafted image to make journal inode->i_size too big,
the loop, "while (i < num)", holds cpu too long. This could cause
soft lockup.

[  529.357541] Call trace:
[  529.357551]  dump_backtrace+0x0/0x198
[  529.357555]  show_stack+0x24/0x30
[  529.357562]  dump_stack+0xa4/0xcc
[  529.357568]  watchdog_timer_fn+0x300/0x3e8
[  529.357574]  __hrtimer_run_queues+0x114/0x358
[  529.357576]  hrtimer_interrupt+0x104/0x2d8
[  529.357580]  arch_timer_handler_virt+0x38/0x58
[  529.357584]  handle_percpu_devid_irq+0x90/0x248
[  529.357588]  generic_handle_irq+0x34/0x50
[  529.357590]  __handle_domain_irq+0x68/0xc0
[  529.357593]  gic_handle_irq+0x6c/0x150
[  529.357595]  el1_irq+0xb8/0x140
[  529.357599]  __ll_sc_atomic_add_return_acquire+0x14/0x20
[  529.357668]  ext4_map_blocks+0x64/0x5c0 [ext4]
[  529.357693]  ext4_setup_system_zone+0x330/0x458 [ext4]
[  529.357717]  ext4_fill_super+0x2170/0x2ba8 [ext4]
[  529.357722]  mount_bdev+0x1a8/0x1e8
[  529.357746]  ext4_mount+0x44/0x58 [ext4]
[  529.357748]  mount_fs+0x50/0x170
[  529.357752]  vfs_kern_mount.part.9+0x54/0x188
[  529.357755]  do_mount+0x5ac/0xd78
[  529.357758]  ksys_mount+0x9c/0x118
[  529.357760]  __arm64_sys_mount+0x28/0x38
[  529.357764]  el0_svc_common+0x78/0x130
[  529.357766]  el0_svc_handler+0x38/0x78
[  529.357769]  el0_svc+0x8/0xc
[  541.356516] watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [mount:18674]

Link: https://lore.kernel.org/r/20200211011752.29242-1-luoshijie1@huawei.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix checksum errors with indexed dirs

commit 48a34311953d921235f4d7bbd2111690d2e469cf upstream.

DIR_INDEX has been introduced as a compat ext4 feature. That means that
even kernels / tools that don't understand the feature may modify the
filesystem. This works because for kernels not understanding indexed dir
format, internal htree nodes appear just as empty directory entries.
Index dir aware kernels then check the htree structure is still
consistent before using the data. This all worked reasonably well until
metadata checksums were introduced. The problem is that these
effectively made DIR_INDEX only ro-compatible because internal htree
nodes store checksums in a different place than normal directory blocks.
Thus any modification ignorant to DIR_INDEX (or just clearing
EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch
and trigger kernel errors. So we have to be more careful when dealing
with indexed directories on filesystems with checksumming enabled.

1) We just disallow loading any directory inodes with EXT4_INDEX_FL when
DIR_INDEX is not enabled. This is harsh but it should be very rare (it
means someone disabled DIR_INDEX on existing filesystem and didn't run
e2fsck), e2fsck can fix the problem, and we don't want to answer the
difficult question: "Should we rather corrupt the directory more or
should we ignore that DIR_INDEX feature is not set?"

2) When we find out htree structure is corrupted (but the filesystem and
the directory should in support htrees), we continue just ignoring htree
information for reading but we refuse to add new entries to the
directory to avoid corrupting it more.

Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz
Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix support for inode sizes > 1024 bytes

commit 4f97a68192bd33b9963b400759cef0ca5963af00 upstream.

A recent commit, 9803387c55f7 ("ext4: validate the
debug_want_extra_isize mount option at parse time"), moved mount-time
checks around. One of those changes moved the inode size check before
the blocksize variable was set to the blocksize of the file system.
After 9803387c55f7 was set to the minimum allowable blocksize, which
in practice on most systems would be 1024 bytes. This cuased file
systems with inode sizes larger than 1024 bytes to be rejected with a
message:

EXT4-fs (sdXX): unsupported inode size: 4096

Fixes: 9803387c55f7 ("ext4: validate the debug_want_extra_isize mount option at parse time")
Link: https://lore.kernel.org/r/20200206225252.GA3673@mit.edu
Reported-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't assume that mmp_nodename/bdevname have NUL

commit 14c9ca0583eee8df285d68a0e6ec71053efd2228 upstream.

Don't assume that the mmp_nodename and mmp_bdevname strings are NUL
terminated, since they are filled in by snprintf(), which is not
guaranteed to do so.

Link: https://lore.kernel.org/r/1580076215-1048-1-git-send-email-adilger@dilger.ca
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000

commit 9f35a31283775e6f6af73fb2c95c686a4c0acac7 upstream.

It should be safe to ignore clock validity check result if the following
conditions are met:
- only one single sample rate is supported;
- the terminal is directly connected to the clock source;
- the clock type is internal.

This is to deal with some Denon DJ controllers that always reports that
clock is invalid.

Tested-by: Tobias Oszlanyi <toszlanyi@yahoo.de>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212235450.697348-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: sound: usb: usb true/false for bool return type

commit 1d4961d9eb1aaa498dfb44779b7e4b95d79112d0 upstream.

Use true/false for bool type return in uac_clock_source_is_valid().

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/20191029175200.GA7320@saurav
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: nofpsmid: Handle TIF_FOREIGN_FPSTATE flag cleanly

commit 52f73c383b2418f2d31b798e765ae7d596c35021 upstream

We detect the absence of FP/SIMD after an incapable CPU is brought up,
and by then we have kernel threads running already with TIF_FOREIGN_FPSTATE set
which could be set for early userspace applications (e.g, modprobe triggered
from initramfs) and init. This could cause the applications to loop forever in
do_nofity_resume() as we never clear the TIF flag, once we now know that
we don't support FP.

Fix this by making sure that we clear the TIF_FOREIGN_FPSTATE flag
for tasks which may have them set, as we would have done in the normal
case, but avoiding touching the hardware state (since we don't support any).

Also to make sure we handle the cases seemlessly we categorise the
helper functions to two :
1) Helpers for common core code, which calls into take appropriate
    actions without knowing the current FPSIMD state of the CPU/task.

    e.g fpsimd_restore_current_state(), fpsimd_flush_task_state(),
        fpsimd_save_and_flush_cpu_state().

    We bail out early for these functions, taking any appropriate actions
    (e.g, clearing the TIF flag) where necessary to hide the handling
    from core code.

2) Helpers used when the presence of FP/SIMD is apparent.
    i.e, save/restore the FP/SIMD register state, modify the CPU/task
    FP/SIMD state.
    e.g,

    fpsimd_save(), task_fpsimd_load() - save/restore task FP/SIMD registers

    fpsimd_bind_task_to_cpu()  \
                                - Update the "state" metadata for CPU/task.
    fpsimd_bind_state_to_cpu() /

    fpsimd_update_current_state() - Update the fp/simd state for the current
                                    task from memory.

    These must not be called in the absence of FP/SIMD. Put in a WARNING
    to make sure they are not invoked in the absence of FP/SIMD.

KVM also uses the TIF_FOREIGN_FPSTATE flag to manage the FP/SIMD state
on the CPU. However, without FP/SIMD support we trap all accesses and
inject undefined instruction. Thus we should never "load" guest state.
Add a sanity check to make sure this is valid.

Cc: stable@vger.kernel.org # v4.19
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: cpufeature: Set the FP/SIMD compat HWCAP bits properly

commit 7559950aef1ab8792c50797c6c5c7c5150a02460 upstream

We set the compat_elf_hwcap bits unconditionally on arm64 to
include the VFP and NEON support. However, the FP/SIMD unit
is optional on Arm v8 and thus could be missing. We already
handle this properly in the kernel, but still advertise to
the COMPAT applications that the VFP is available. Fix this
to make sure we only advertise when we really have them.

Cc: stable@vger.kernel.org # v4.19
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Apply sample rate quirk for Audioengine D1

commit 93f9d1a4ac5930654c17412e3911b46ece73755a upstream.

The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate,
but it returns the rate in byte-reversed order.

When setting sampling rate, the driver produces these warning messages:
[168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100
[168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000
[168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000

As can be seen from the hexadecimal conversion, the current rate read
back is byte-reversed from the rate that was set.

44100 == 0x00ac44, 4500480 == 0x44ac00
48000 == 0x00bb80, 8436480 == 0x80bb00
96000 == 0x017700, 30465 == 0x007701

Rather than implementing a new quirk to reverse the order, just skip
checking the rate to avoid spamming the log.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200211162235.1639889-1-nivedita@alum.mit.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fix silent output on MSI-GL73

commit 7dafba3762d6c0083ded00a48f8c1a158bc86717 upstream.

MSI-GL73 laptop with ALC1220 codec requires a similar workaround for
Clevo laptops to enforce the DAC/mixer connection path. Set up a
quirk entry for that.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204159
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212081047.27727-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix UAC2/3 effect unit parsing

commit d75a170fd848f037a1e28893ad10be7a4c51f8a6 upstream.

We've got a regression report about M-Audio Fast Track C400 device,
and the git bisection resulted in the commit e0ccdef92653 ("ALSA:
usb-audio: Clean up check_input_term()").  This commit was about the
rewrite of the input terminal parser, and it's not too obvious from
the change what really broke.  The answer is: it's the interpretation
of UAC2/3 effect units.

In the original code, UAC2 effect unit is as if through UAC1
processing unit because both UAC1 PU and UAC2/3 EU share the same
number (0x07).  The old code went through a complex switch-case
fallthrough, finally bailing out in the middle:

  if (protocol == UAC_VERSION_2 &&
      hdr[2] == UAC2_EFFECT_UNIT) {
         /* UAC2/UAC1 unit IDs overlap here in an
          * uncompatible way. Ignore this unit for now.
          */
         return 0;
   }

... and this special handling was missing in the new code; the new
code treats UAC2/3 effect unit as if it were equivalent with the
processing unit.

Actually, the old code was too confusing.  The effect unit has an
incompatible unit description with the processing unit, so we
shouldn't have dealt with EU in the same way.

This patch addresses the regression by changing the effect unit
handling to the own parser function.  The own parser function makes
the clear distinct with PU, so it improves the readability, too.

The EU parser just sets the type and the id like the old kernels.
Once when the proper effect unit support is added, we can revisit this
parser function, but for now, let's keep this simple setup as is.

Fixes: e0ccdef92653 ("ALSA: usb-audio: Clean up check_input_term()")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206147
Link: https://lore.kernel.org/r/20200211160521.31990-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list

commit 5179a9dfa9440c1781816e2c9a183d1d2512dc61 upstream.

The Yoga 11e is using LEN0049, but it doesn't have a trackstick.

Thus, there is no need to create a software top buttons row.

However, it seems that the device works under SMBus, so keep it as part
of the smbus_pnp_ids.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200115013023.9710-1-benjamin.tissoires@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>