OSDN Git Service
Masahiro Yamada [Tue, 14 Nov 2017 11:38:07 +0000 (20:38 +0900)]
coccinelle: fix parallel build with CHECK=scripts/coccicheck
[ Upstream commit
d7059ca0147adcd495f3c5b41f260e1ac55bb679 ]
The command "make -j8 C=1 CHECK=scripts/coccicheck" produces
lots of "coccicheck failed" error messages.
Julia Lawall explained the Coccinelle behavior as follows:
"The problem on the Coccinelle side is that it uses a subdirectory
with the name of the semantic patch to store standard output and
standard error for the different threads. I didn't want to use a
name with the pid, so that one could easily find this information
while Coccinelle is running. Normally the subdirectory is cleaned
up when Coccinelle completes, so there is only one of them at a time.
Maybe it is best to just add the pid. There is the risk that these
subdirectories will accumulate if Coccinelle crashes in a way such
that they don't get cleaned up, but Coccinelle could print a warning
if it detects this case, rather than failing."
When scripts/coccicheck is used as CHECK tool and -j option is given
to Make, the whole of build process runs in parallel. So, multiple
processes try to get access to the same subdirectory.
I notice spatch creates the subdirectory only when it runs in parallel
(i.e. --jobs <N> is given and <N> is greater than 1).
Setting NPROC=1 is a reasonable solution; spatch does not create the
subdirectory. Besides, ONLINE=1 mode takes a single file input for
each spatch invocation, so there is no reason to parallelize it in
the first place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Wed, 15 Nov 2017 09:17:07 +0000 (18:17 +0900)]
kbuild: pkg: use --transform option to prefix paths in tar
[ Upstream commit
2dbc644ac62bbcb9ee78e84719953f611be0413d ]
For rpm-pkg and deb-pkg, a source tar file is created. All paths in
the archive must be prefixed with the base name of the tar so that
everything is contained in the directory when you extract it.
Currently, scripts/package/Makefile uses a symlink for that, and
removes it after the tar is created.
If you terminate the build during the tar creation, the symlink is
left over. Then, at the next package build, you will see a warning
like follows:
ln: '.' and 'kernel-4.14.0+/.' are the same file
It is possible to fix it by adding -n (--no-dereference) option to
the "ln" command, but a cleaner way is to use --transform option
of "tar" command. This option is GNU extension, but it should not
hurt to use it in the Linux build system.
The 'S' flag is needed to exclude symlinks from the path fixup.
Without it, symlinks in the kernel are broken.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ursula Braun [Tue, 21 Nov 2017 12:23:53 +0000 (13:23 +0100)]
net/smc: use sk_rcvbuf as start for rmb creation
[ Upstream commit
4e1061f4a2bba1669c7297455c73ddafbebf2b12 ]
Commit
3e034725c0d8 ("net/smc: common functions for RMBs and send buffers")
merged handling of SMC receive and send buffers. It introduced sk_buf_size
as merged start value for size determination. But since sk_buf_size is not
used at all, sk_sndbuf is erroneously used as start for rmb creation.
This patch makes sure, sk_buf_size is really used as intended, and
sk_rcvbuf is used as start value for rmb creation.
Fixes:
3e034725c0d8 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Fri, 17 Nov 2017 18:35:53 +0000 (18:35 +0000)]
irqchip/qcom: Fix u32 comparison with value less than zero
[ Upstream commit
e9990d70e8a063a7b894c5cbb99f630a0f41200d ]
The comparison of u32 nregs being less than zero is never true since
nregs is unsigned. Fix this by making nregs a signed integer.
Fixes:
f20cc9b00c7b ("irqchip/qcom: Add IRQ combiner driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kernel-janitors@vger.kernel.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: https://lkml.kernel.org/r/20171117183553.2739-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Mon, 27 Nov 2017 11:22:42 +0000 (11:22 +0000)]
ARM: avoid faulting on qemu
commit
3aaf33bebda8d4ffcc0fc8ef39e6c1ac68823b11 upstream.
When qemu starts a kernel in a bare environment, the default SCR has
the AW and FW bits clear, which means that the kernel can't modify
the PSR A or PSR F bits, and means that FIQs and imprecise aborts are
always masked.
When running uboot under qemu, the AW and FW SCR bits are set, and the
kernel functions normally - and this is how real hardware behaves.
Fix this for qemu by ignoring the FIQ bit.
Fixes:
8bafae202c82 ("ARM: BUG if jumping to usermode address in kernel mode")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Fri, 24 Nov 2017 23:49:34 +0000 (23:49 +0000)]
ARM: BUG if jumping to usermode address in kernel mode
commit
8bafae202c82dc257f649ea3c275a0f35ee15113 upstream.
Detect if we are returning to usermode via the normal kernel exit paths
but the saved PSR value indicates that we are in kernel mode. This
could occur due to corrupted stack state, which has been observed with
"ftracetest".
This ensures that we catch the problem case before we get to user code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:43 +0000 (15:04 +0200)]
crypto: talitos - fix ctr-aes-talitos
commit
70d355ccea899dad47dc22d3a4406998f55143fd upstream.
ctr-aes-talitos test fails as follows on SEC2
[ 0.837427] alg: skcipher: Test 1 failed (invalid result) on encryption for ctr-aes-talitos
[ 0.845763]
00000000: 16 36 d5 ee 34 f8 06 25 d7 7f 8e 56 ca 88 43 45
[ 0.852345]
00000010: f9 3f f7 17 2a b2 12 23 30 43 09 15 82 dd e1 97
[ 0.858940]
00000020: a7 f7 32 b5 eb 25 06 13 9a ec f5 29 25 f8 4d 66
[ 0.865366]
00000030: b0 03 5b 8e aa 9a 42 b6 19 33 8a e2 9d 65 96 95
This patch fixes the descriptor type which is special for CTR AES
Fixes:
5e75ae1b3cef6 ("crypto: talitos - add new crypto modes")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:41 +0000 (15:04 +0200)]
crypto: talitos - fix use of sg_link_tbl_len
commit
fbb22137c4d9bab536958b152d096fb3f98020ea upstream.
sg_link_tbl_len shall be used instead of cryptlen, otherwise
SECs which perform HW CICV verification will fail.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:39 +0000 (15:04 +0200)]
crypto: talitos - fix AEAD for sha224 on non sha224 capable chips
commit
6cda075aff67a1b9b5ba1b2818091dc939643b6c upstream.
sha224 AEAD test fails with:
[ 2.803125] talitos
ff020000.crypto: DEUISR 0x00000000_00000000
[ 2.808743] talitos
ff020000.crypto: MDEUISR 0x80100000_00000000
[ 2.814678] talitos
ff020000.crypto: DESCBUF 0x20731f21_00000018
[ 2.820616] talitos
ff020000.crypto: DESCBUF 0x0628d64c_00000010
[ 2.826554] talitos
ff020000.crypto: DESCBUF 0x0631005c_00000018
[ 2.832492] talitos
ff020000.crypto: DESCBUF 0x0628d664_00000008
[ 2.838430] talitos
ff020000.crypto: DESCBUF 0x061b13a0_00000080
[ 2.844369] talitos
ff020000.crypto: DESCBUF 0x0631006c_00000080
[ 2.850307] talitos
ff020000.crypto: DESCBUF 0x0631006c_00000018
[ 2.856245] talitos
ff020000.crypto: DESCBUF 0x063100ec_00000000
[ 2.884972] talitos
ff020000.crypto: failed to reset channel 0
[ 2.890503] talitos
ff020000.crypto: done overflow, internal time out, or rngu error: ISR 0x20000000_00020000
[ 2.900652] alg: aead: encryption failed on test 1 for authenc-hmac-sha224-cbc-3des-talitos: ret=22
This is due to SHA224 not being supported by the HW. Allthough for
hash we are able to init the hash context by SW, it is not
possible for AEAD. Therefore SHA224 AEAD has to be deactivated.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:37 +0000 (15:04 +0200)]
crypto: talitos - fix setkey to check key weakness
commit
f384cdc4faf350fdb6ad93c5f26952b9ba7c7566 upstream.
Crypto manager test report the following failures:
[ 3.061081] alg: skcipher: setkey failed on test 5 for ecb-des-talitos: flags=100
[ 3.069342] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-talitos: flags=100
[ 3.077754] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-talitos: flags=100
This is due to setkey being expected to detect weak keys.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:35 +0000 (15:04 +0200)]
crypto: talitos - fix memory corruption on SEC2
commit
e04a61bebc5da1535b6f194b464295b8d558e2fc upstream.
On SEC2, when using the old descriptors type (hmac snoop no afeu)
for doing IPsec, the CICV out pointeur points out of the allocated
memory.
[ 2.502554] =============================================================================
[ 2.510740] BUG dma-kmalloc-256 (Not tainted): Redzone overwritten
[ 2.516907] -----------------------------------------------------------------------------
[ 2.516907]
[ 2.526535] Disabling lock debugging due to kernel taint
[ 2.531845] INFO: 0xde858108-0xde85810b. First byte 0xf8 instead of 0xcc
[ 2.538549] INFO: Allocated in 0x806181a9 age=0 cpu=0 pid=58
[ 2.544229] __kmalloc+0x374/0x564
[ 2.547649] talitos_edesc_alloc+0x17c/0x48c
[ 2.551929] aead_edesc_alloc+0x80/0x154
[ 2.555863] aead_encrypt+0x30/0xe0
[ 2.559368] __test_aead+0x5a0/0x1f3c
[ 2.563042] test_aead+0x2c/0x110
[ 2.566371] alg_test_aead+0x5c/0xf4
[ 2.569958] alg_test+0x1dc/0x5a0
[ 2.573305] cryptomgr_test+0x50/0x70
[ 2.576984] kthread+0xd8/0x134
[ 2.580155] ret_from_kernel_thread+0x5c/0x64
[ 2.584534] INFO: Freed in ipsec_esp_encrypt_done+0x130/0x240 age=6 cpu=0 pid=0
[ 2.591839] ipsec_esp_encrypt_done+0x130/0x240
[ 2.596395] flush_channel+0x1dc/0x488
[ 2.600161] talitos2_done_4ch+0x30/0x200
[ 2.604185] tasklet_action+0xa0/0x13c
[ 2.607948] __do_softirq+0x148/0x6cc
[ 2.611623] irq_exit+0xc0/0x124
[ 2.614869] call_do_irq+0x24/0x3c
[ 2.618292] do_IRQ+0x78/0x108
[ 2.621369] ret_from_except+0x0/0x14
[ 2.625055] finish_task_switch+0x58/0x350
[ 2.629165] schedule+0x80/0x134
[ 2.632409] schedule_preempt_disabled+0x38/0xc8
[ 2.637042] cpu_startup_entry+0xe4/0x190
[ 2.641074] start_kernel+0x3f4/0x408
[ 2.644741] 0x3438
[ 2.646857] INFO: Slab 0xdffbdb00 objects=9 used=1 fp=0xde8581c0 flags=0x0080
[ 2.653978] INFO: Object 0xde858008 @offset=8 fp=0xca4395df
[ 2.653978]
[ 2.661032] Redzone
de858000: cc cc cc cc cc cc cc cc ........
[ 2.669029] Object
de858008: 00 00 00 02 00 00 00 02 00 6b 6b 6b 1e 83 ea 28 .........kkk...(
[ 2.677628] Object
de858018: 00 00 00 70 1e 85 80 64 ff 73 1d 21 6b 6b 6b 6b ...p...d.s.!kkkk
[ 2.686228] Object
de858028: 00 20 00 00 1e 84 17 24 00 10 00 00 1e 85 70 00 . .....$......p.
[ 2.694829] Object
de858038: 00 18 00 00 1e 84 17 44 00 08 00 00 1e 83 ea 28 .......D.......(
[ 2.703430] Object
de858048: 00 80 00 00 1e 84 f0 00 00 80 00 00 1e 85 70 10 ..............p.
[ 2.712030] Object
de858058: 00 20 6b 00 1e 85 80 f4 6b 6b 6b 6b 00 80 02 00 . k.....kkkk....
[ 2.720629] Object
de858068: 1e 84 f0 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk
[ 2.729230] Object
de858078: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.737830] Object
de858088: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.746429] Object
de858098: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.755029] Object
de8580a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.763628] Object
de8580b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.772229] Object
de8580c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.780829] Object
de8580d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.789430] Object
de8580e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 73 b0 ea 9f kkkkkkkkkkkks...
[ 2.798030] Object
de8580f8: e8 18 80 d6 56 38 44 c0 db e3 4f 71 f7 ce d1 d3 ....V8D...Oq....
[ 2.806629] Redzone
de858108: f8 bd 3e 4f ..>O
[ 2.814279] Padding
de8581b0: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
[ 2.822283] CPU: 0 PID: 0 Comm: swapper Tainted: G B
4.9.50-g995be12679 #179
[ 2.831819] Call Trace:
[ 2.834301] [
dffefd20] [
c01aa9a8] check_bytes_and_report+0x100/0x194 (unreliable)
[ 2.841801] [
dffefd50] [
c01aac3c] check_object+0x200/0x530
[ 2.847306] [
dffefd80] [
c01ae584] free_debug_processing+0x290/0x690
[ 2.853585] [
dffefde0] [
c01aec8c] __slab_free+0x308/0x628
[ 2.859000] [
dffefe80] [
c05057f4] ipsec_esp_encrypt_done+0x130/0x240
[ 2.865378] [
dffefeb0] [
c05002c4] flush_channel+0x1dc/0x488
[ 2.870968] [
dffeff10] [
c05007a8] talitos2_done_4ch+0x30/0x200
[ 2.876814] [
dffeff30] [
c002fe38] tasklet_action+0xa0/0x13c
[ 2.882399] [
dffeff60] [
c002f118] __do_softirq+0x148/0x6cc
[ 2.887896] [
dffeffd0] [
c002f954] irq_exit+0xc0/0x124
[ 2.892968] [
dffefff0] [
c0013adc] call_do_irq+0x24/0x3c
[ 2.898213] [
c0d4be00] [
c000757c] do_IRQ+0x78/0x108
[ 2.903113] [
c0d4be30] [
c0015c08] ret_from_except+0x0/0x14
[ 2.908634] --- interrupt: 501 at finish_task_switch+0x70/0x350
[ 2.908634] LR = finish_task_switch+0x58/0x350
[ 2.919327] [
c0d4bf20] [
c085e1d4] schedule+0x80/0x134
[ 2.924398] [
c0d4bf50] [
c085e2c0] schedule_preempt_disabled+0x38/0xc8
[ 2.930853] [
c0d4bf60] [
c007f064] cpu_startup_entry+0xe4/0x190
[ 2.936707] [
c0d4bfb0] [
c096c434] start_kernel+0x3f4/0x408
[ 2.942198] [
c0d4bff0] [
00003438] 0x3438
[ 2.946137] FIX dma-kmalloc-256: Restoring 0xde858108-0xde85810b=0xcc
[ 2.946137]
[ 2.954158] FIX dma-kmalloc-256: Object at 0xde858008 not freed
This patch reworks the handling of the CICV out in order
to properly handle all cases.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LEROY Christophe [Fri, 6 Oct 2017 13:04:33 +0000 (15:04 +0200)]
crypto: talitos - fix AEAD test failures
commit
ec8c7d14acc0a477429d3a6fade5dab72c996c82 upstream.
AEAD tests fail when destination SG list has more than 1 element.
[ 2.058752] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-aes-talitos
[ 2.066965]
00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: c0 43 ff 74 c0 43 ff e0 de 83 d1 20 de 84 8e 54
00000020: de 83 d7 c4
[ 2.082138] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-aes-talitos
[ 2.090435]
00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: de 84 ea 58 c0 93 1a 24 de 84 e8 59 de 84 f1 20
00000020: 00 00 00 00
[ 2.105721] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-3des-talitos
[ 2.114259]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c
[ 2.166410] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-3des-talitos
[ 2.174794]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c
[ 2.226486] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-talitos)
[ 2.236459] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-talitos)
[ 2.247196] alg: aead: Test 1 failed on encryption for authenc-hmac-sha224-cbc-3des-talitos
[ 2.255555]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8
[ 2.309004] alg: aead: Test 1 failed on encryption for authenc-hmac-sha224-cbc-3des-talitos
[ 2.317562]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8
[ 2.370710] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-aes-talitos
[ 2.379177]
00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
[ 2.397863] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-aes-talitos
[ 2.406134]
00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
[ 2.424789] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-3des-talitos
[ 2.433491]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8 c0 96 e9 20 c0 00 3d dc
[ 2.488832] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-3des-talitos
[ 2.497387]
00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8 c0 96 e9 20 c0 00 3d dc
This patch fixes that.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Jurgens [Wed, 29 Nov 2017 18:10:39 +0000 (20:10 +0200)]
IB/core: Only enforce security for InfiniBand
commit
315d160c5a4e034a576a13aa21e7235d5c9ec609 upstream.
For now the only LSM security enforcement mechanism available is
specific to InfiniBand. Bypass enforcement for non-IB link types.
This fixes a regression where modify_qp fails for iWARP because
querying the PKEY returns -EINVAL.
Cc: Paul Moore <paul@paul-moore.com>
Cc: Don Dutile <ddutile@redhat.com>
Reported-by: Potnuri Bharat Teja <bharat@chelsio.com>
Fixes:
d291f1a65232("IB/core: Enforce PKey security on QPs")
Fixes:
47a2b338fe63("IB/core: Enforce security on management datagrams")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parav Pandit [Thu, 2 Nov 2017 13:22:27 +0000 (15:22 +0200)]
IB/core: Avoid unnecessary return value check
commit
2e4c85c6edc80fa532b2c7e1eb3597ef4d4bbb8f upstream.
Since there is nothing done with non zero return value, such check is
avoided.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kim Phillips [Wed, 11 Oct 2017 21:33:24 +0000 (22:33 +0100)]
bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
commit
b69f63ebf553504739cc8534cbed31bd530c6f0b upstream.
Unregistering the driver before calling cpuhp_remove_multi_state() removes
any remaining hotplug cpu instances so __cpuhp_remove_state_cpuslocked()
doesn't emit this warning:
[ 268.748362] Error: Removing state 147 which has instances left.
[ 268.748373] ------------[ cut here ]------------
[ 268.748386] WARNING: CPU: 2 PID: 5476 at kernel/cpu.c:1734 __cpuhp_remove_state_cpuslocked+0x454/0x4f0
[ 268.748389] Modules linked in: arm_ccn(-) [last unloaded: arm_ccn]
[ 268.748403] CPU: 2 PID: 5476 Comm: rmmod Tainted: G W 4.14.0-rc4+ #3
[ 268.748406] Hardware name: AMD Seattle/Seattle, BIOS 10:18:39 Dec 8 2016
[ 268.748410] task:
ffff8001a18ca000 task.stack:
ffff80019c120000
[ 268.748416] PC is at __cpuhp_remove_state_cpuslocked+0x454/0x4f0
[ 268.748421] LR is at __cpuhp_remove_state_cpuslocked+0x448/0x4f0
[ 268.748425] pc : [<
ffff2000081729ec>] lr : [<
ffff2000081729e0>] pstate:
60000145
[ 268.748427] sp :
ffff80019c127d30
[ 268.748430] x29:
ffff80019c127d30 x28:
ffff8001a18ca000
[ 268.748437] x27:
ffff20000c2cb000 x26:
1fffe4000042d490
[ 268.748443] x25:
ffff20000216a480 x24:
0000000000000000
[ 268.748449] x23:
ffff20000b08e000 x22:
0000000000000001
[ 268.748455] x21:
0000000000000093 x20:
00000000000016f8
[ 268.748460] x19:
ffff20000c2cbb80 x18:
0000ffffb5fe7c58
[ 268.748466] x17:
00000000004402d0 x16:
1fffe40001864f01
[ 268.748472] x15:
ffff20000c4bf8b0 x14:
0000000000000000
[ 268.748477] x13:
0000000000007032 x12:
ffff20000829ae48
[ 268.748483] x11:
ffff20000c4bf000 x10:
0000000000000004
[ 268.748488] x9 :
0000000000006fbc x8 :
ffff20000c318a40
[ 268.748494] x7 :
0000000000000000 x6 :
ffff040001864f02
[ 268.748500] x5 :
0000000000000000 x4 :
0000000000000000
[ 268.748505] x3 :
0000000000000007 x2 :
dfff200000000000
[ 268.748510] x1 :
000000000000ad3d x0 :
00000000000001f0
[ 268.748516] Call trace:
[ 268.748521] Exception stack(0xffff80019c127bf0 to 0xffff80019c127d30)
[ 268.748526] 7be0:
00000000000001f0 000000000000ad3d
[ 268.748531] 7c00:
dfff200000000000 0000000000000007 0000000000000000 0000000000000000
[ 268.748535] 7c20:
ffff040001864f02 0000000000000000 ffff20000c318a40 0000000000006fbc
[ 268.748539] 7c40:
0000000000000004 ffff20000c4bf000 ffff20000829ae48 0000000000007032
[ 268.748544] 7c60:
0000000000000000 ffff20000c4bf8b0 1fffe40001864f01 00000000004402d0
[ 268.748548] 7c80:
0000ffffb5fe7c58 ffff20000c2cbb80 00000000000016f8 0000000000000093
[ 268.748553] 7ca0:
0000000000000001 ffff20000b08e000 0000000000000000 ffff20000216a480
[ 268.748557] 7cc0:
1fffe4000042d490 ffff20000c2cb000 ffff8001a18ca000 ffff80019c127d30
[ 268.748562] 7ce0:
ffff2000081729e0 ffff80019c127d30 ffff2000081729ec 0000000060000145
[ 268.748566] 7d00:
00000000000001f0 0000000000000000 0001000000000000 0000000000000000
[ 268.748569] 7d20:
ffff80019c127d30 ffff2000081729ec
[ 268.748575] [<
ffff2000081729ec>] __cpuhp_remove_state_cpuslocked+0x454/0x4f0
[ 268.748580] [<
ffff200008172adc>] __cpuhp_remove_state+0x54/0x80
[ 268.748597] [<
ffff20000215dd84>] arm_ccn_exit+0x2c/0x70 [arm_ccn]
[ 268.748604] [<
ffff20000834cfbc>] SyS_delete_module+0x5a4/0x708
[ 268.748607] Exception stack(0xffff80019c127ec0 to 0xffff80019c128000)
[ 268.748612] 7ec0:
0000000019bb7258 0000000000000800 ba64d0fb3d26a800 00000000000000da
[ 268.748616] 7ee0:
0000ffffb6144e28 0000ffffcd95b409 fefefefefefefeff 7f7f7f7f7f7f7f7f
[ 268.748621] 7f00:
000000000000006a 1999999999999999 0000ffffb6179000 0000000000bbcc6d
[ 268.748625] 7f20:
0000ffffb6176b98 0000ffffcd95c2d0 0000ffffb5fe7b58 0000ffffb6163000
[ 268.748630] 7f40:
0000ffffb60ad3e0 00000000004402d0 0000ffffb5fe7c58 0000000019bb71f0
[ 268.748634] 7f60:
0000ffffcd95c740 0000000000000000 0000000019bb71f0 0000000000416700
[ 268.748639] 7f80:
0000000000000000 00000000004402e8 0000000019bb6010 0000ffffcd95c748
[ 268.748643] 7fa0:
0000000000000000 0000ffffcd95c460 00000000004113a8 0000ffffcd95c460
[ 268.748648] 7fc0:
0000ffffb60ad3e8 0000000080000000 0000000019bb7258 000000000000006a
[ 268.748652] 7fe0:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 268.748657] [<
ffff200008084f9c>] __sys_trace_return+0x0/0x4
[ 268.748661] ---[ end trace
a996d358dcaa7f9c ]---
Fixes:
8df038725ad5 ("bus/arm-ccn: Use cpu-hp's multi instance support instead custom list")
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 3 Oct 2017 17:14:12 +0000 (18:14 +0100)]
bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
commit
b18c2b9487d8e797fc0a757e57ac3645348c5fba upstream.
Booting a DEBUG_PREEMPT enabled kernel on a CCN-based system
results in the following splat:
[...]
arm-ccn
e8000000.ccn: No access to interrupts, using timer.
BUG: using smp_processor_id() in preemptible [
00000000] code: swapper/0/1
caller is debug_smp_processor_id+0x1c/0x28
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.13.0 #6111
Hardware name: AMD Seattle/Seattle, BIOS 17:08:23 Jun 26 2017
Call trace:
[<
ffff000008089e78>] dump_backtrace+0x0/0x278
[<
ffff00000808a22c>] show_stack+0x24/0x30
[<
ffff000008bc3bc4>] dump_stack+0x8c/0xb0
[<
ffff00000852b534>] check_preemption_disabled+0xfc/0x100
[<
ffff00000852b554>] debug_smp_processor_id+0x1c/0x28
[<
ffff000008551bd8>] arm_ccn_probe+0x358/0x4f0
[...]
as we use smp_processor_id() in the wrong context.
Turn this into a get_cpu()/put_cpu() that extends over the CPU hotplug
registration, making sure that we don't race against a CPU down operation.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Sun, 27 Aug 2017 10:06:50 +0000 (11:06 +0100)]
bus: arm-ccn: Check memory allocation failure
commit
24771179c5c138f0ea3ef88b7972979f62f2d5db upstream.
Check memory allocation failures and return -ENOMEM in such cases
This avoids a potential NULL pointer dereference.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 3 Oct 2017 17:14:13 +0000 (18:14 +0100)]
bus: arm-cci: Fix use of smp_processor_id() in preemptible context
commit
4608af8aa53e7f3922ddee695d023b7bcd5cb35b upstream.
The ARM CCI driver seem to be using smp_processor_id() in a
preemptible context, which is likely to make a DEBUG_PREMPT
kernel scream at boot time.
Turn this into a get_cpu()/put_cpu() that extends over the CPU
hotplug registration, making sure that we don't race against
a CPU down operation.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Wed, 15 Nov 2017 12:03:53 +0000 (10:03 -0200)]
Revert "ARM: dts: imx53: add srtc node"
commit
e501506d3ea00eefa64463ebd9e5c13ee70990bd upstream.
This reverts commit
5b725054147deaf966b3919e10a86c6bfe946a18.
The rtc block on i.MX53 is a completely different hardware than the
one found on i.MX25.
Reported-by: Noel Vellemans <Noel.Vellemans@visionbms.com>
Suggested-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Wed, 6 Dec 2017 10:51:12 +0000 (10:51 +0000)]
arm64: SW PAN: Update saved ttbr0 value on enter_lazy_tlb
commit
d96cc49bff5a7735576cc6f6f111f875d101cec8 upstream.
enter_lazy_tlb is called when a kernel thread rides on the back of
another mm, due to a context switch or an explicit call to unuse_mm
where a call to switch_mm is elided.
In these cases, it's important to keep the saved ttbr value up to date
with the active mm, otherwise we can end up with a stale value which
points to a potentially freed page table.
This patch implements enter_lazy_tlb for arm64, so that the saved ttbr0
is kept up-to-date with the active mm for kernel threads.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Fixes:
39bc88e5e38e9b21 ("arm64: Disable TTBR0_EL1 during normal kernel execution")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Wed, 6 Dec 2017 10:42:10 +0000 (10:42 +0000)]
arm64: SW PAN: Point saved ttbr0 at the zero page when switching to init_mm
commit
0adbdfde8cfc9415aeed2a4955d2d17b3bd9bf13 upstream.
update_saved_ttbr0 mandates that mm->pgd is not swapper, since swapper
contains kernel mappings and should never be installed into ttbr0. However,
this means that callers must avoid passing the init_mm to update_saved_ttbr0
which in turn can cause the saved ttbr0 value to be out-of-date in the context
of the idle thread. For example, EFI runtime services may leave the saved ttbr0
pointing at the EFI page table, and kernel threads may end up with stale
references to freed page tables.
This patch changes update_saved_ttbr0 so that the init_mm points the saved
ttbr0 value to the empty zero page, which always exists and never contains
valid translations. EFI and switch can then call into update_saved_ttbr0
unconditionally.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Fixes:
39bc88e5e38e9b21 ("arm64: Disable TTBR0_EL1 during normal kernel execution")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Martin [Tue, 5 Dec 2017 14:56:42 +0000 (14:56 +0000)]
arm64: fpsimd: Prevent registers leaking from dead tasks
commit
071b6d4a5d343046f253a5a8835d477d93992002 upstream.
Currently, loading of a task's fpsimd state into the CPU registers
is skipped if that task's state is already present in the registers
of that CPU.
However, the code relies on the struct fpsimd_state * (and by
extension struct task_struct *) to unambiguously identify a task.
There is a particular case in which this doesn't work reliably:
when a task exits, its task_struct may be recycled to describe a
new task.
Consider the following scenario:
1) Task P loads its fpsimd state onto cpu C.
per_cpu(fpsimd_last_state, C) := P;
P->thread.fpsimd_state.cpu := C;
2) Task X is scheduled onto C and loads its fpsimd state on C.
per_cpu(fpsimd_last_state, C) := X;
X->thread.fpsimd_state.cpu := C;
3) X exits, causing X's task_struct to be freed.
4) P forks a new child T, which obtains X's recycled task_struct.
T == X.
T->thread.fpsimd_state.cpu == C (inherited from P).
5) T is scheduled on C.
T's fpsimd state is not loaded, because
per_cpu(fpsimd_last_state, C) == T (== X) &&
T->thread.fpsimd_state.cpu == C.
(This is the check performed by fpsimd_thread_switch().)
So, T gets X's registers because the last registers loaded onto C
were those of X, in (2).
This patch fixes the problem by ensuring that the sched-in check
fails in (5): fpsimd_flush_task_state(T) is called when T is
forked, so that T->thread.fpsimd_state.cpu == C cannot be true.
This relies on the fact that T is not schedulable until after
copy_thread() completes.
Once T's fpsimd state has been loaded on some CPU C there may still
be other cpus D for which per_cpu(fpsimd_last_state, D) ==
&X->thread.fpsimd_state. But D is necessarily != C in this case,
and the check in (5) must fail.
An alternative fix would be to do refcounting on task_struct. This
would result in each CPU holding a reference to the last task whose
fpsimd state was loaded there. It's not clear whether this is
preferable, and it involves higher overhead than the fix proposed
in this patch. It would also move all the task_struct freeing
work into the context switch critical section, or otherwise some
deferred cleanup mechanism would need to be introduced, neither of
which seems obviously justified.
Fixes:
005f78cd8849 ("arm64: defer reloading a task's FPSIMD state to userland resume")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: word-smithed the comment so it makes more sense]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Thu, 16 Nov 2017 17:58:18 +0000 (17:58 +0000)]
KVM: arm/arm64: vgic-its: Check result of allocation before use
commit
686f294f2f1ae40705283dd413ca1e4c14f20f93 upstream.
We miss a test against NULL after allocation.
Fixes:
6d03a68f8054 ("KVM: arm64: vgic-its: Turn device_id validation into generic ID validation")
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Thu, 16 Nov 2017 17:58:16 +0000 (17:58 +0000)]
KVM: arm/arm64: vgic: Preserve the revious read from the pending table
commit
ddb4b0102cb9cdd2398d98b3e1e024e08a2f4239 upstream.
The current pending table parsing code assumes that we keep the
previous read of the pending bits, but keep that variable in
the current block, making sure it is discarded on each loop.
We end-up using whatever is on the stack. Who knows, it might
just be the right thing...
Fixes:
280771252c1ba ("KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES")
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Thu, 16 Nov 2017 17:58:15 +0000 (17:58 +0000)]
KVM: arm/arm64: vgic-irqfd: Fix MSI entry allocation
commit
150009e2c70cc3c6e97f00e7595055765d32fb85 upstream.
Using the size of the structure we're allocating is a good idea
and avoids any surprise... In this case, we're happilly confusing
kvm_kernel_irq_routing_entry and kvm_irq_routing_entry...
Fixes:
95b110ab9a09 ("KVM: arm/arm64: Enable irqchip routing")
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoffer Dall [Sun, 3 Dec 2017 22:54:41 +0000 (23:54 +0100)]
KVM: arm/arm64: Fix broken GICH_ELRSR big endian conversion
commit
fc396e066318c0a02208c1d3f0b62950a7714999 upstream.
We are incorrectly rearranging 32-bit words inside a 64-bit typed value
for big endian systems, which would result in never marking a virtual
interrupt as inactive on big endian systems (assuming 32 or fewer LRs on
the hardware). Fix this by not doing any word order manipulation for
the typed values.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Honig [Fri, 1 Dec 2017 18:21:09 +0000 (10:21 -0800)]
KVM: VMX: remove I/O port 0x80 bypass on Intel hosts
commit
d59d51f088014f25c2562de59b9abff4f42a7468 upstream.
This fixes CVE-2017-
1000407.
KVM allows guests to directly access I/O port 0x80 on Intel hosts. If
the guest floods this port with writes it generates exceptions and
instability in the host kernel, leading to a crash. With this change
guest writes to port 0x80 on Intel will behave the same as they
currently behave on AMD systems.
Prevent the flooding by removing the code that sets port 0x80 as a
passthrough port. This is essentially the same as upstream patch
99f85a28a78e96d28907fe036e1671a218fee597, except that patch was
for AMD chipsets and this patch is for Intel.
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Fixes:
fdef3ad1b386 ("KVM: VMX: Enable io bitmaps to avoid IO port 0x80 VMEXITs")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Thu, 16 Nov 2017 17:58:21 +0000 (17:58 +0000)]
arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one
commit
5553b142be11e794ebc0805950b2e8313f93d718 upstream.
VTTBR_BADDR_MASK is used to sanity check the size and alignment of the
VTTBR address. It seems to currently be off by one, thereby only
allowing up to 39-bit addresses (instead of 40-bit) and also
insufficiently checking the alignment. This patch fixes it.
This patch is the 32bit pendent of Kristina's arm64 fix, and
she deserves the actual kudos for pinpointing that one.
Fixes:
f7ed45be3ba52 ("KVM: ARM: World-switch implementation")
Reported-by: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kristina Martsenko [Thu, 16 Nov 2017 17:58:20 +0000 (17:58 +0000)]
arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one
commit
26aa7b3b1c0fb3f1a6176a0c1847204ef4355693 upstream.
VTTBR_BADDR_MASK is used to sanity check the size and alignment of the
VTTBR address. It seems to currently be off by one, thereby only
allowing up to 47-bit addresses (instead of 48-bit) and also
insufficiently checking the alignment. This patch fixes it.
As an example, with 4k pages, before this patch we have:
PHYS_MASK_SHIFT = 48
VTTBR_X = 37 - 24 = 13
VTTBR_BADDR_SHIFT = 13 - 1 = 12
VTTBR_BADDR_MASK = ((1 << 35) - 1) << 12 = 0x00007ffffffff000
Which is wrong, because the mask doesn't allow bit 47 of the VTTBR
address to be set, and only requires the address to be 12-bit (4k)
aligned, while it actually needs to be 13-bit (8k) aligned because we
concatenate two 4k tables.
With this patch, the mask becomes 0x0000ffffffffe000, which is what we
want.
Fixes:
0369f6a34b9f ("arm64: KVM: EL2 register definitions")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Sun, 19 Nov 2017 21:57:27 +0000 (16:57 -0500)]
media: rc: partial revert of "media: rc: per-protocol repeat period"
commit
67f0f15ad5c47490e19f2526f8f9cea97c5ce1a6 upstream.
Since commit
d57ea877af38 ("media: rc: per-protocol repeat period"), most
IR protocols have a lower keyup timeout. This causes problems on the
ite-cir, which has default IR timeout of 200ms.
Since the IR decoders read the trailing space, with a IR timeout of 200ms,
the last keydown will have at least a delay of 200ms. This is more than
the protocol timeout of e.g. rc-6 (which is 164ms). As a result the last
IR will be interpreted as a new keydown event, and we get two keypresses.
Revert the protocol timeout to 250ms, except for cec which needs a timeout
of 550ms.
Fixes:
d57ea877af38 ("media: rc: per-protocol repeat period")
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Tested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Wed, 8 Nov 2017 21:19:45 +0000 (16:19 -0500)]
media: rc: sir_ir: detect presence of port
commit
30b4e122d71cbec2944a5f8b558b88936ee42f10 upstream.
Without this test, sir_ir clumsy claims resources for a device which
does not exist.
The 0-day kernel test robot reports the following errors (in a loop):
sir_ir sir_ir.0: Trapped in interrupt
genirq: Flags mismatch irq 4.
00000000 (ttyS0) vs.
00000000 (sir_ir)
When sir_ir is loaded with the default io and irq, the following happens:
- sir_ir claims irq 4
- user space opens /dev/ttyS0
- in serial8250_do_startup(), some setup is done for ttyS0, which causes
irq 4 to fire (in THRE test)
- sir_ir does not realise it was not for it, and spins until the "trapped
in interrupt"
- now serial driver calls setup_irq() and fails and we get the
"Flags mismatch" error.
There is no port present at 0x3e8 so simply check for the presence of a
port, as suggested by Linus.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laurent Caumont [Sat, 11 Nov 2017 17:44:46 +0000 (12:44 -0500)]
media: dvb: i2c transfers over usb cannot be done from stack
commit
6d33377f2abbf9f0e561b116dd468d1c3ff36a6a upstream.
Signed-off-by: Laurent Caumont <lcaumont2@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Wed, 29 Nov 2017 15:37:30 +0000 (17:37 +0200)]
drm/i915: Fix vblank timestamp/frame counter jumps on gen2
commit
a87e55f89f0b0dc541d89248a8445635936a3858 upstream.
Previously I was under the impression that the scanline counter
reads 0 when the pipe is off. Turns out that's not correct, and
instead the scanline counter simply stops when the pipe stops, and
it retains it's last value until the pipe starts up again, at which
point the scanline counter jumps to vblank start.
These jumps can cause the timestamp to jump backwards by one frame.
Since we use the timestamps to guesstimage also the frame counter
value on gen2, that would cause the frame counter to also jump
backwards, which leads to a massice difference from the previous value.
The end result is that flips/vblank events don't appear to complete as
they're stuck waiting for the frame counter to catch up to that massive
difference.
Fix the problem properly by actually making sure the scanline counter
has started to move before we assume that it's safe to enable vblank
processing.
v2: Less pointless duplication in the code (Chris)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes:
b7792d8b54cc ("drm/i915: Wait for pipe to start before sampling vblank timestamps on gen2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129153732.3612-1-ville.syrjala@linux.intel.com
(cherry picked from commit
8fedd64dabc86d0f31a0d1e152be3aa23c323553)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Wed, 22 Nov 2017 13:14:47 +0000 (14:14 +0100)]
drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
commit
120a264f9c2782682027d931d83dcbd22e01da80 upstream.
When no IOMMU is available, all GEM buffers allocated by Exynos DRM driver
are contiguous, because of the underlying dma_alloc_attrs() function
provides only such buffers. In such case it makes no sense to keep
BO_NONCONTIG flag for the allocated GEM buffers. This allows to avoid
failures for buffer contiguity checks in the subsequent operations on GEM
objects.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Tue, 21 Nov 2017 07:49:36 +0000 (08:49 +0100)]
drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
commit
510353a63796d467b41237ab4f136136f68c297d upstream.
get_modes() callback might be called asynchronously from the DRM core and
it is not synchronized with bridge_enable(), which sets proper runtime PM
state of the main DP device. Fix this by calling pm_runtime_get_sync()
before calling drm_get_edid(), which in turn calls drm_dp_i2c_xfer() and
analogix_dp_transfer() to ensure that main DP device is runtime active
when doing any access to its registers.
This fixes the following kernel issue on Samsung Exynos5250 Snow board:
Unhandled fault: imprecise external abort (0x406) at 0x00000000
pgd =
c0004000
[
00000000] *pgd=
00000000
Internal error: : 406 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 62 Comm: kworker/0:2 Not tainted
4.13.0-rc2-00364-g4a97a3da420b #3357
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events output_poll_execute
task:
edc14800 task.stack:
edcb2000
PC is at analogix_dp_transfer+0x15c/0x2fc
LR is at analogix_dp_transfer+0x134/0x2fc
pc : [<
c0468538>] lr : [<
c0468510>] psr:
60000013
sp :
edcb3be8 ip :
0000002a fp :
00000001
r10:
00000000 r9 :
edcb3cd8 r8 :
edcb3c40
r7 :
00000000 r6 :
edd3b380 r5 :
edd3b010 r4 :
00000064
r3 :
00000000 r2 :
f0ad3000 r1 :
edcb3c40 r0 :
edd3b010
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control:
10c5387d Table:
4000406a DAC:
00000051
Process kworker/0:2 (pid: 62, stack limit = 0xedcb2210)
Stack: (0xedcb3be8 to 0xedcb4000)
[<
c0468538>] (analogix_dp_transfer) from [<
c0424ba4>] (drm_dp_i2c_do_msg+0x8c/0x2b4)
[<
c0424ba4>] (drm_dp_i2c_do_msg) from [<
c0424e64>] (drm_dp_i2c_xfer+0x98/0x214)
[<
c0424e64>] (drm_dp_i2c_xfer) from [<
c057b2d8>] (__i2c_transfer+0x140/0x29c)
[<
c057b2d8>] (__i2c_transfer) from [<
c057b4a4>] (i2c_transfer+0x70/0xe4)
[<
c057b4a4>] (i2c_transfer) from [<
c0441de4>] (drm_do_probe_ddc_edid+0xb4/0x114)
[<
c0441de4>] (drm_do_probe_ddc_edid) from [<
c0441e5c>] (drm_probe_ddc+0x18/0x28)
[<
c0441e5c>] (drm_probe_ddc) from [<
c0445728>] (drm_get_edid+0x124/0x2d4)
[<
c0445728>] (drm_get_edid) from [<
c0465ea0>] (analogix_dp_get_modes+0x90/0x114)
[<
c0465ea0>] (analogix_dp_get_modes) from [<
c0425e8c>] (drm_helper_probe_single_connector_modes+0x198/0x68c)
[<
c0425e8c>] (drm_helper_probe_single_connector_modes) from [<
c04325d4>] (drm_setup_crtcs+0x1b4/0xd18)
[<
c04325d4>] (drm_setup_crtcs) from [<
c04344a8>] (drm_fb_helper_hotplug_event+0x94/0xd0)
[<
c04344a8>] (drm_fb_helper_hotplug_event) from [<
c0425a50>] (drm_kms_helper_hotplug_event+0x24/0x28)
[<
c0425a50>] (drm_kms_helper_hotplug_event) from [<
c04263ec>] (output_poll_execute+0x6c/0x174)
[<
c04263ec>] (output_poll_execute) from [<
c0136f18>] (process_one_work+0x188/0x3fc)
[<
c0136f18>] (process_one_work) from [<
c01371f4>] (worker_thread+0x30/0x4b8)
[<
c01371f4>] (worker_thread) from [<
c013daf8>] (kthread+0x128/0x164)
[<
c013daf8>] (kthread) from [<
c0108510>] (ret_from_fork+0x14/0x24)
Code:
0a000002 ea000009 e2544001 0a00004a (
e59537c8)
---[ end trace
cddc7919c79f7878 ]---
Reported-by: Misha Komarovskiy <zombah@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171121074936.22520-1-m.szyprowski@samsung.com
Song Liu [Mon, 20 Nov 2017 06:17:00 +0000 (22:17 -0800)]
md/r5cache: move mddev_lock() out of r5c_journal_mode_set()
commit
ff35f58e8f8eb520367879a0ccc6f2ec4b62b17b upstream.
r5c_journal_mode_set() is called by r5c_journal_mode_store() and
raid_ctr() in dm-raid. We don't need mddev_lock() when calling from
raid_ctr(). This patch fixes this by moves the mddev_lock() to
r5c_journal_mode_store().
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Thompson [Mon, 2 Mar 2015 14:13:36 +0000 (14:13 +0000)]
kdb: Fix handling of kallsyms_symbol_next() return value
commit
c07d35338081d107e57cf37572d8cc931a8e32e2 upstream.
kallsyms_symbol_next() returns a boolean (true on success). Currently
kdb_read() tests the return value with an inequality that
unconditionally evaluates to true.
This is fixed in the obvious way and, since the conditional branch is
supposed to be unreachable, we also add a WARN_ON().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arend Van Spriel [Sat, 25 Nov 2017 20:39:25 +0000 (21:39 +0100)]
brcmfmac: change driver unbind order of the sdio function devices
commit
5c3de777bdaf48bd0cfb43097c0d0fb85056cab7 upstream.
In the function brcmf_sdio_firmware_callback() the driver is
unbound from the sdio function devices in the error path.
However, the order in which it is done resulted in a use-after-free
issue (see brcmf_ops_sdio_remove() in bcmsdh.c). Hence change
the order and first unbind sdio function #2 device and then
unbind sdio function #1 device.
Fixes:
7a51461fc2da ("brcmfmac: unbind all devices upon failure in firmware callback")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Spinadel [Mon, 21 Nov 2016 15:01:25 +0000 (17:01 +0200)]
iwlwifi: mvm: enable RX offloading with TKIP and WEP
commit
9d0fc5a50a0548f8e5d61243e5e5f26d5c405aef upstream.
Set the flag that indicates that ICV was stripped on if
this option was enabled in the HW.
[this is needed for the 9000-series HW to work properly]
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emmanuel Grumbach [Sun, 19 Nov 2017 08:35:14 +0000 (10:35 +0200)]
iwlwifi: mvm: fix packet injection
commit
b13f43a48571f0cd0fda271b5046b65f1f268db5 upstream.
We need to have a station and a queue for the monitor
interface to be able to inject traffic. We used to have
this traffic routed to the auxiliary queue, but this queue
isn't scheduled for the station we had linked to the
monitor vif.
Allocate a new queue, link it to the monitor vif's station
and make that queue use the BE fifo.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=196715
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ihab Zhaika [Thu, 16 Nov 2017 07:29:19 +0000 (09:29 +0200)]
iwlwifi: add new cards for 9260 and 22000 series
commit
567deca8e72df3ceb6c07c63f8541a4928f64d3b upstream.
add 1 PCI ID for 9260 series and 1 for 22000 series.
Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Mon, 13 Nov 2017 16:26:09 +0000 (17:26 +0100)]
iwlwifi: mvm: flush queue before deleting ROC
commit
6c2d49fdc5d947c5fe89935bd52e69f10000f4cb upstream.
Before deleting a time event (remain-on-channel instance), flush
the queue so that frames cannot get stuck on it. We already flush
the AUX STA queues, but a separate station is used for the P2P
Device queue.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emmanuel Grumbach [Mon, 13 Nov 2017 07:50:47 +0000 (09:50 +0200)]
iwlwifi: mvm: don't use transmit queue hang detection when it is not possible
commit
0b9832b712d6767d6c7b01965fd788d1ca84fc92 upstream.
When we act as an AP, new firmware versions handle
internally the power saving clients and the driver doesn't
know that the peers went to sleep. It is, hence, possible
that a peer goes to sleep for a long time and stop pulling
frames. This will cause its transmit queue to hang which is
a condition that triggers the recovery flow in the driver.
While this client is certainly buggy (it should have pulled
the frame based on the TIM IE in the beacon), we can't blow
up because of a buggy client.
Change the current implementation to not enable the
transmit queue hang detection on queues that serve peers
when we act as an AP / GO.
We can still enable this mechanism using the debug
configuration which can come in handy when we want to
debug why the client doesn't wake up.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sara Sharon [Mon, 8 Feb 2016 21:30:47 +0000 (23:30 +0200)]
iwlwifi: mvm: mark MIC stripped MPDUs
commit
bf19037074e770aad74b3b90f37b8b98db3f3748 upstream.
When RADA is active, the hardware decrypts the packets and strips off
the MIC as it is useless after decryption. Indicate that to mac80211.
[this is needed for the 9000-series HW to work properly]
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Wed, 6 Dec 2017 08:21:14 +0000 (18:21 +1000)]
powerpc/64s: Initialize ISAv3 MMU registers before setting partition table
commit
371b80447ff33ddac392c189cf884a5a3e18faeb upstream.
kexec can leave MMU registers set when booting into a new kernel,
the PIDR (Process Identification Register) in particular. The boot
sequence does not zero PIDR, so it only gets set when CPUs first
switch to a userspace processes (until then it's running a kernel
thread with effective PID = 0).
This leaves a window where a process table entry and page tables are
set up due to user processes running on other CPUs, that happen to
match with a stale PID. The CPU with that PID may cause speculative
accesses that address quadrant 0 (aka userspace addresses), which will
result in cached translations and PWC (Page Walk Cache) for that
process, on a CPU which is not in the mm_cpumask and so they will not
be invalidated properly.
The most common result is the kernel hanging in infinite page fault
loops soon after kexec (usually in schedule_tail, which is usually the
first non-speculative quadrant 0 access to a new PID) due to a stale
PWC. However being a stale translation error, it could result in
anything up to security and data corruption problems.
Fix this by zeroing out PIDR at boot and kexec.
Fixes:
7e381c0ff618 ("powerpc/mm/radix: Add mmu context handling callback for radix")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Gibson [Mon, 4 Dec 2017 05:27:25 +0000 (16:27 +1100)]
Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier"
commit
ab9dbf771ff9b6b7e814e759213ed01d7f0de320 upstream.
This reverts commit
a3b2cb30f252b21a6f962e0dd107c8b897ca65e4.
That commit tried to fix problems with panic on powerpc in certain
circumstances, where some output from the generic panic code was being
dropped.
Unfortunately, it breaks things worse in other circumstances. In
particular when running a PAPR guest, it will now attempt to reboot
instead of informing the hypervisor (KVM or PowerVM) that the guest
has crashed. The crash notification is important to some
virtualization management layers.
Revert it for now until we can come up with a better solution.
Fixes:
a3b2cb30f252 ("powerpc: Do not call ppc_md.panic in fadump panic notifier")
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[mpe: Tweak change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janosch Frank [Mon, 4 Dec 2017 11:19:11 +0000 (12:19 +0100)]
KVM: s390: Fix skey emulation permission check
commit
ca76ec9ca871e67d8cd0b6caba24aca3d3ac4546 upstream.
All skey functions call skey_check_enable at their start, which checks
if we are in the PSTATE and injects a privileged operation exception
if we are.
Unfortunately they continue processing afterwards and perform the
operation anyhow as skey_check_enable does not deliver an error if the
exception injection was successful.
Let's move the PSTATE check into the skey functions and exit them on
such an occasion, also we now do not enable skey handling anymore in
such a case.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes:
a7e19ab ("KVM: s390: handle missing storage-key facility")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens [Wed, 6 Dec 2017 15:11:27 +0000 (16:11 +0100)]
s390: fix compat system call table
commit
e779498df587dd2189b30fe5b9245aefab870eb8 upstream.
When wiring up the socket system calls the compat entries were
incorrectly set. Not all of them point to the corresponding compat
wrapper functions, which clear the upper 33 bits of user space
pointers, like it is required.
Fixes:
977108f89c989 ("s390: wire up separate socketcalls system calls")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens [Mon, 4 Dec 2017 08:42:45 +0000 (09:42 +0100)]
s390/mm: fix off-by-one bug in 5-level page table handling
commit
8d306f53b63099fec2d56300149e400d181ba4f5 upstream.
Martin Cermak reported that setting a uprobe doesn't work. Reason for
this is that the common uprobes code tries to get an unmapped area at
the last possible page within an address space.
This broke with commit
1aea9b3f9210 ("s390/mm: implement 5 level pages
tables") which introduced an off-by-one bug which prevents to map
anything at the last possible page within an address space.
The check with the off-by-one bug however can be removed since with
commit
8ab867cb0806 ("s390/mm: fix BUG_ON in crst_table_upgrade") the
necessary check is done at both call sites.
Reported-by: Martin Cermak <mcermak@redhat.com>
Bisected-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes:
1aea9b3f9210 ("s390/mm: implement 5 level pages tables")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens [Mon, 20 Nov 2017 11:38:44 +0000 (12:38 +0100)]
s390: always save and restore all registers on context switch
commit
fbbd7f1a51965b50dd12924841da0d478f3da71b upstream.
The switch_to() macro has an optimization to avoid saving and
restoring register contents that aren't needed for kernel threads.
There is however the possibility that a kernel thread execve's a user
space program. In such a case the execve'd process can partially see
the contents of the previous process, which shouldn't be allowed.
To avoid this, simply always save and restore register contents on
context switch.
Fixes:
fdb6d070effba ("switch_to: dont restore/save access & fpu regs for kernel threads")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Jiangshan [Tue, 28 Nov 2017 13:19:53 +0000 (21:19 +0800)]
smp/hotplug: Move step CPUHP_AP_SMPCFD_DYING to the correct place
commit
46febd37f9c758b05cd25feae8512f22584742fe upstream.
Commit
31487f8328f2 ("smp/cfd: Convert core to hotplug state machine")
accidently put this step on the wrong place. The step should be at the
cpuhp_ap_states[] rather than the cpuhp_bp_states[].
grep smpcfd /sys/devices/system/cpu/hotplug/states
40: smpcfd:prepare
129: smpcfd:dying
"smpcfd:dying" was missing before.
So was the invocation of the function smpcfd_dying_cpu().
Fixes:
31487f8328f2 ("smp/cfd: Convert core to hotplug state machine")
Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20171128131954.81229-1-jiangshanlai@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Thu, 28 Sep 2017 14:14:01 +0000 (15:14 +0100)]
iommu/vt-d: Fix scatterlist offset handling
commit
29a90b70893817e2f2bb3cea40a29f5308e21b21 upstream.
The intel-iommu DMA ops fail to correctly handle scatterlists where
sg->offset is greater than PAGE_SIZE - the IOVA allocation is computed
appropriately based on the page-aligned portion of the offset, but the
mapping is set up relative to sg->page, which means it fails to actually
cover the whole buffer (and in the worst case doesn't cover it at all):
(sg->dma_address + sg->dma_len) ----+
sg->dma_address ---------+ |
iov_pfn------+ | |
| | |
v v v
iova: a b c d e f
|--------|--------|--------|--------|--------|
<...calculated....>
[_____mapped______]
pfn: 0 1 2 3 4 5
|--------|--------|--------|--------|--------|
^ ^ ^
| | |
sg->page ----+ | |
sg->offset --------------+ |
(sg->offset + sg->length) ----------+
As a result, the caller ends up overrunning the mapping into whatever
lies beyond, which usually goes badly:
[ 429.645492] DMAR: DRHD: handling fault status reg 2
[ 429.650847] DMAR: [DMA Write] Request device [02:00.4] fault addr
f2682000 ...
Whilst this is a fairly rare occurrence, it can happen from the result
of intermediate scatterlist processing such as scatterwalk_ffwd() in the
crypto layer. Whilst that particular site could be fixed up, it still
seems worthwhile to bring intel-iommu in line with other DMA API
implementations in handling this robustly.
To that end, fix the intel_map_sg() path to line up the mapping
correctly (in units of MM pages rather than VT-d pages to match the
aligned_nrpages() calculation) regardless of the offset, and use
sg_phys() consistently for clarity.
Reported-by: Harsh Jain <Harsh@chelsio.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed by: Ashok Raj <ashok.raj@intel.com>
Tested by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaejoong Kim [Mon, 4 Dec 2017 06:31:49 +0000 (15:31 +0900)]
ALSA: usb-audio: Add check return value for usb_string()
commit
89b89d121ffcf8d9546633b98ded9d18b8f75891 upstream.
snd_usb_copy_string_desc() returns zero if usb_string() fails.
In case of failure, we need to check the snd_usb_copy_string_desc()'s
return value and add an exception case
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaejoong Kim [Mon, 4 Dec 2017 06:31:48 +0000 (15:31 +0900)]
ALSA: usb-audio: Fix out-of-bound error
commit
251552a2b0d454badc8f486e6d79100970c744b0 upstream.
The snd_usb_copy_string_desc() retrieves the usb string corresponding to
the index number through the usb_string(). The problem is that the
usb_string() returns the length of the string (>= 0) when successful, but
it can also return a negative value about the error case or status of
usb_control_msg().
If iClockSource is '0' as shown below, usb_string() will returns -EINVAL.
This will result in '0' being inserted into buf[-22], and the following
KASAN out-of-bound error message will be output.
AudioControl Interface Descriptor:
bLength 8
bDescriptorType 36
bDescriptorSubtype 10 (CLOCK_SOURCE)
bClockID 1
bmAttributes 0x07 Internal programmable Clock (synced to SOF)
bmControls 0x07
Clock Frequency Control (read/write)
Clock Validity Control (read-only)
bAssocTerminal 0
iClockSource 0
To fix it, check usb_string()'return value and bail out.
==================================================================
BUG: KASAN: stack-out-of-bounds in parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
Write of size 1 at addr
ffff88007e66735a by task systemd-udevd/18376
CPU: 0 PID: 18376 Comm: systemd-udevd Not tainted 4.13.0+ #3
Hardware name: LG Electronics 15N540-RFLGL/White Tip Mountain, BIOS 15N5
Call Trace:
dump_stack+0x63/0x8d
print_address_description+0x70/0x290
? parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
kasan_report+0x265/0x350
__asan_store1+0x4a/0x50
parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
? save_stack+0xb5/0xd0
? save_stack_trace+0x1b/0x20
? save_stack+0x46/0xd0
? kasan_kmalloc+0xad/0xe0
? kmem_cache_alloc_trace+0xff/0x230
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? usb_probe_interface+0x1f5/0x440
? driver_probe_device+0x3ed/0x660
? build_feature_ctl+0xb10/0xb10 [snd_usb_audio]
? save_stack_trace+0x1b/0x20
? init_object+0x69/0xa0
? snd_usb_find_csint_desc+0xa8/0xf0 [snd_usb_audio]
snd_usb_mixer_controls+0x1dc/0x370 [snd_usb_audio]
? build_audio_procunit+0x890/0x890 [snd_usb_audio]
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? kmem_cache_alloc_trace+0xff/0x230
? usb_ifnum_to_if+0xbd/0xf0
snd_usb_create_mixer+0x25b/0x4b0 [snd_usb_audio]
? snd_usb_create_stream+0x255/0x2c0 [snd_usb_audio]
usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? snd_usb_autosuspend.part.7+0x30/0x30 [snd_usb_audio]
? __pm_runtime_idle+0x90/0x90
? kernfs_activate+0xa6/0xc0
? usb_match_one_id_intf+0xdc/0x130
? __pm_runtime_set_status+0x2d4/0x450
usb_probe_interface+0x1f5/0x440
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 30 Nov 2017 09:08:28 +0000 (10:08 +0100)]
ALSA: seq: Remove spurious WARN_ON() at timer check
commit
43a3542870328601be02fcc9d27b09db467336ef upstream.
The use of snd_BUG_ON() in ALSA sequencer timer may lead to a spurious
WARN_ON() when a slave timer is deployed as its backend and a
corresponding master timer stops meanwhile. The symptom was triggered
by syzkaller spontaneously.
Since the NULL timer is valid there, rip off snd_BUG_ON().
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robb Glasser [Tue, 5 Dec 2017 17:16:55 +0000 (09:16 -0800)]
ALSA: pcm: prevent UAF in snd_pcm_info
commit
362bca57f5d78220f8b5907b875961af9436e229 upstream.
When the device descriptor is closed, the `substream->runtime` pointer
is freed. But another thread may be in the ioctl handler, case
SNDRV_CTL_IOCTL_PCM_INFO. This case calls snd_pcm_info_user() which
calls snd_pcm_info() which accesses the now freed `substream->runtime`.
Note: this fixes CVE-2017-0861
Signed-off-by: Robb Glasser <rglasser@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Tue, 5 Dec 2017 07:38:24 +0000 (15:38 +0800)]
ALSA: hda/realtek - New codec support for ALC257
commit
f429e7e494afaded76e62c6f98211a635aa03098 upstream.
Add new support for ALC257 codec.
[ It's supposed to be almost equivalent with other ALC25x variants,
just adding another type and id -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Mahoney [Tue, 21 Nov 2017 18:58:49 +0000 (13:58 -0500)]
btrfs: handle errors while updating refcounts in update_ref_for_cow
commit
692826b2738101549f032a761a9191636e83be4e upstream.
Since commit
fb235dc06fa (btrfs: qgroup: Move half of the qgroup
accounting time out of commit trans) the assumption that
btrfs_add_delayed_{data,tree}_ref can only return 0 or -ENOMEM has
been false. The qgroup operations call into btrfs_search_slot
and friends and can now return the full spectrum of error codes.
Fortunately, the fix here is easy since update_ref_for_cow failing
is already handled so we just need to bail early with the error
code.
Fixes:
fb235dc06fa (btrfs: qgroup: Move half of the qgroup accounting ...)
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Mahoney [Mon, 4 Dec 2017 18:11:45 +0000 (13:11 -0500)]
btrfs: fix missing error return in btrfs_drop_snapshot
commit
e19182c0fff451e3744c1107d98f072e7ca377a0 upstream.
If btrfs_del_root fails in btrfs_drop_snapshot, we'll pick up the
error but then return 0 anyway due to mixing err and ret.
Fixes:
79787eaab4612 ("btrfs: replace many BUG_ONs with proper error handling")
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Radim Krčmář [Thu, 30 Nov 2017 18:05:45 +0000 (19:05 +0100)]
KVM: x86: fix APIC page invalidation
commit
b1394e745b9453dcb5b0671c205b770e87dedb87 upstream.
Implementation of the unpinned APIC page didn't update the VMCS address
cache when invalidation was done through range mmu notifiers.
This became a problem when the page notifier was removed.
Re-introduce the arch-specific helper and call it from ...range_start.
Reported-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Fixes:
38b9917350cb ("kvm: vmx: Implement set_apic_access_page_addr")
Fixes:
369ea8242c0f ("mm/rmap: update to new mmu_notifier semantic v2")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Wanpeng Li <wanpeng.li@hotmail.com>
Tested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Fri, 1 Dec 2017 14:08:12 +0000 (15:08 +0100)]
x86/PCI: Make broadcom_postcore_init() check acpi_disabled
commit
ddec3bdee05b06f1dda20ded003c3e10e4184cab upstream.
acpi_os_get_root_pointer() may return a valid address even if acpi_disabled
is set, but the host bridge information from the ACPI tables is not going
to be used in that case and the Broadcom host bridge initialization should
not be skipped then, So make broadcom_postcore_init() check acpi_disabled
too to avoid this issue.
Fixes:
6361d72b04d1 (x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan)
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linux PCI <linux-pci@vger.kernel.org>
Link: https://lkml.kernel.org/r/3186627.pxZj1QbYNg@aspire.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunyu Hu [Mon, 27 Nov 2017 14:21:39 +0000 (22:21 +0800)]
x86/idt: Load idt early in start_secondary
commit
55d2d0ad2fb4325f615d1950486fbc5e6fba1769 upstream.
On a secondary, idt is first loaded in cpu_init() with load_current_idt(),
i.e. no exceptions can be handled before that point.
The conversion of WARN() to use UD requires the IDT being loaded earlier as
any warning between start_secondary() and load_curren_idt() in cpu_init()
will result in an unhandled @UD exception and therefore fail the bringup of
the CPU.
Install the IDT handlers right in start_secondary() before calling cpu_init().
[ tglx: Massaged changelog ]
Fixes:
9a93848fe787 ("x86/debug: Implement __WARN() using UD0")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: rostedt@goodmis.org
Cc: luto@kernel.org
Link: https://lkml.kernel.org/r/1511792499-4073-1-git-send-email-chuhu@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 8 Dec 2017 15:13:29 +0000 (15:13 +0000)]
X.509: fix comparisons of ->pkey_algo
commit
54c1fb39fe0495f846539ab765925b008f86801c upstream.
->pkey_algo used to be an enum, but was changed to a string by commit
4e8ae72a75aa ("X.509: Make algo identifiers text instead of enum"). But
two comparisons were not updated. Fix them to use strcmp().
This bug broke signature verification in certain configurations,
depending on whether the string constants were deduplicated or not.
Fixes:
4e8ae72a75aa ("X.509: Make algo identifiers text instead of enum")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 8 Dec 2017 15:13:27 +0000 (15:13 +0000)]
X.509: reject invalid BIT STRING for subjectPublicKey
commit
0f30cbea005bd3077bd98cd29277d7fc2699c1da upstream.
Adding a specially crafted X.509 certificate whose subjectPublicKey
ASN.1 value is zero-length caused x509_extract_key_data() to set the
public key size to SIZE_MAX, as it subtracted the nonexistent BIT STRING
metadata byte. Then, x509_cert_parse() called kmemdup() with that bogus
size, triggering the WARN_ON_ONCE() in kmalloc_slab().
This appears to be harmless, but it still must be fixed since WARNs are
never supposed to be user-triggerable.
Fix it by updating x509_cert_parse() to validate that the value has a
BIT STRING metadata byte, and that the byte is 0 which indicates that
the number of bits in the bitstring is a multiple of 8.
It would be nice to handle the metadata byte in asn1_ber_decoder()
instead. But that would be tricky because in the general case a BIT
STRING could be implicitly tagged, and/or could legitimately have a
length that is not a whole number of bytes.
Here was the WARN (cleaned up slightly):
WARNING: CPU: 1 PID: 202 at mm/slab_common.c:971 kmalloc_slab+0x5d/0x70 mm/slab_common.c:971
Modules linked in:
CPU: 1 PID: 202 Comm: keyctl Tainted: G B
4.14.0-09238-g1d3b78bbc6e9 #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
task:
ffff880033014180 task.stack:
ffff8800305c8000
Call Trace:
__do_kmalloc mm/slab.c:3706 [inline]
__kmalloc_track_caller+0x22/0x2e0 mm/slab.c:3726
kmemdup+0x17/0x40 mm/util.c:118
kmemdup include/linux/string.h:414 [inline]
x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106
x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
SYSC_add_key security/keys/keyctl.c:122 [inline]
SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
entry_SYSCALL_64_fastpath+0x1f/0x96
Fixes:
42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 8 Dec 2017 15:13:29 +0000 (15:13 +0000)]
KEYS: reject NULL restriction string when type is specified
commit
18026d866801d0c52e5550210563222bd6c7191d upstream.
keyctl_restrict_keyring() allows through a NULL restriction when the
"type" is non-NULL, which causes a NULL pointer dereference in
asymmetric_lookup_restriction() when it calls strcmp() on the
restriction string.
But no key types actually use a "NULL restriction" to mean anything, so
update keyctl_restrict_keyring() to reject it with EINVAL.
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes:
97d3aa0f3134 ("KEYS: Add a lookup_restriction function for the asymmetric key type")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 8 Dec 2017 15:13:27 +0000 (15:13 +0000)]
KEYS: add missing permission check for request_key() destination
commit
4dca6ea1d9432052afb06baf2e3ae78188a4410b upstream.
When the request_key() syscall is not passed a destination keyring, it
links the requested key (if constructed) into the "default" request-key
keyring. This should require Write permission to the keyring. However,
there is actually no permission check.
This can be abused to add keys to any keyring to which only Search
permission is granted. This is because Search permission allows joining
the keyring. keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_SESSION_KEYRING)
then will set the default request-key keyring to the session keyring.
Then, request_key() can be used to add keys to the keyring.
Both negatively and positively instantiated keys can be added using this
method. Adding negative keys is trivial. Adding a positive key is a
bit trickier. It requires that either /sbin/request-key positively
instantiates the key, or that another thread adds the key to the process
keyring at just the right time, such that request_key() misses it
initially but then finds it in construct_alloc_key().
Fix this bug by checking for Write permission to the keyring in
construct_get_dest_keyring() when the default keyring is being used.
We don't do the permission check for non-default keyrings because that
was already done by the earlier call to lookup_user_key(). Also,
request_key_and_link() is currently passed a 'struct key *' rather than
a key_ref_t, so the "possessed" bit is unavailable.
We also don't do the permission check for the "requestor keyring", to
continue to support the use case described by commit
8bbf4976b59f
("KEYS: Alter use of key instantiation link-to-keyring argument") where
/sbin/request-key recursively calls request_key() to add keys to the
original requestor's destination keyring. (I don't know of any users
who actually do that, though...)
Fixes:
3e30148c3d52 ("[PATCH] Keys: Make request-key create an authorisation key")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 8 Dec 2017 15:13:27 +0000 (15:13 +0000)]
ASN.1: check for error from ASN1_OP_END__ACT actions
commit
81a7be2cd69b412ab6aeacfe5ebf1bb6e5bce955 upstream.
asn1_ber_decoder() was ignoring errors from actions associated with the
opcodes ASN1_OP_END_SEQ_ACT, ASN1_OP_END_SET_ACT,
ASN1_OP_END_SEQ_OF_ACT, and ASN1_OP_END_SET_OF_ACT. In practice, this
meant the pkcs7_note_signed_info() action (since that was the only user
of those opcodes). Fix it by checking for the error, just like the
decoder does for actions associated with the other opcodes.
This bug allowed users to leak slab memory by repeatedly trying to add a
specially crafted "pkcs7_test" key (requires CONFIG_PKCS7_TEST_KEY).
In theory, this bug could also be used to bypass module signature
verification, by providing a PKCS#7 message that is misparsed such that
a signature's ->authattrs do not contain its ->msgdigest. But it
doesn't seem practical in normal cases, due to restrictions on the
format of the ->authattrs.
Fixes:
42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 8 Dec 2017 15:13:27 +0000 (15:13 +0000)]
ASN.1: fix out-of-bounds read when parsing indefinite length item
commit
e0058f3a874ebb48b25be7ff79bc3b4e59929f90 upstream.
In asn1_ber_decoder(), indefinitely-sized ASN.1 items were being passed
to the action functions before their lengths had been computed, using
the bogus length of 0x80 (ASN1_INDEFINITE_LENGTH). This resulted in
reading data past the end of the input buffer, when given a specially
crafted message.
Fix it by rearranging the code so that the indefinite length is resolved
before the action is called.
This bug was originally found by fuzzing the X.509 parser in userspace
using libFuzzer from the LLVM project.
KASAN report (cleaned up slightly):
BUG: KASAN: slab-out-of-bounds in memcpy ./include/linux/string.h:341 [inline]
BUG: KASAN: slab-out-of-bounds in x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
Read of size 128 at addr
ffff880035dd9eaf by task keyctl/195
CPU: 1 PID: 195 Comm: keyctl Not tainted
4.14.0-09238-g1d3b78bbc6e9 #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0xd1/0x175 lib/dump_stack.c:53
print_address_description+0x78/0x260 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x23f/0x350 mm/kasan/report.c:409
memcpy+0x1f/0x50 mm/kasan/kasan.c:302
memcpy ./include/linux/string.h:341 [inline]
x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
asn1_ber_decoder+0xb4a/0x1fd0 lib/asn1_decoder.c:447
x509_cert_parse+0x1c7/0x620 crypto/asymmetric_keys/x509_cert_parser.c:89
x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
SYSC_add_key security/keys/keyctl.c:122 [inline]
SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
entry_SYSCALL_64_fastpath+0x1f/0x96
Allocated by task 195:
__do_kmalloc_node mm/slab.c:3675 [inline]
__kmalloc_node+0x47/0x60 mm/slab.c:3682
kvmalloc ./include/linux/mm.h:540 [inline]
SYSC_add_key security/keys/keyctl.c:104 [inline]
SyS_add_key+0x19e/0x290 security/keys/keyctl.c:62
entry_SYSCALL_64_fastpath+0x1f/0x96
Fixes:
42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pan Bian [Wed, 6 Dec 2017 09:50:09 +0000 (09:50 +0000)]
efi/esrt: Use memunmap() instead of kfree() to free the remapping
commit
89c5a2d34bda58319e3075e8e7dd727ea25a435c upstream.
The remapping result of memremap() should be freed with memunmap(), not kfree().
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 6 Dec 2017 09:50:08 +0000 (09:50 +0000)]
efi: Move some sysfs files to be read-only by root
commit
af97a77bc01ce49a466f9d4c0125479e2e2230b6 upstream.
Thanks to the scripts/leaking_addresses.pl script, it was found that
some EFI values should not be readable by non-root users.
So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to
make this easier, and use it in other places at the same time.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Tue, 21 Nov 2017 13:23:39 +0000 (14:23 +0100)]
scsi: libsas: align sata_device's rps_resp on a cacheline
commit
c2e8fbf908afd81ad502b567a6639598f92c9b9d upstream.
The rps_resp buffer in ata_device is a DMA target, but it isn't
explicitly cacheline aligned. Due to this, adjacent fields can be
overwritten with stale data from memory on non-coherent architectures.
As a result, the kernel is sometimes unable to communicate with an SATA
device behind a SAS expander.
Fix this by ensuring that the rps_resp buffer is cacheline aligned.
This issue is similar to that fixed by Commit
84bda12af31f93 ("libata:
align ap->sector_buf") and Commit
4ee34ea3a12396f35b26 ("libata: Align
ata_device's id on a cacheline").
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Tue, 21 Nov 2017 13:23:38 +0000 (14:23 +0100)]
scsi: use dma_get_cache_alignment() as minimum DMA alignment
commit
90addc6b3c9cda0146fbd62a08e234c2b224a80c upstream.
In non-coherent DMA mode, kernel uses cache flushing operations to
maintain I/O coherency, so scsi's block queue should be aligned to the
value returned by dma_get_cache_alignment(). Otherwise, If a DMA buffer
and a kernel structure share a same cache line, and if the kernel
structure has dirty data, cache_invalidate (no writeback) will cause
data corruption.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
[hch: rebased and updated the comment and changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Tue, 21 Nov 2017 13:23:37 +0000 (14:23 +0100)]
scsi: dma-mapping: always provide dma_get_cache_alignment
commit
860dd4424f344400b491b212ee4acb3a358ba9d9 upstream.
Provide the dummy version of dma_get_cache_alignment that always returns
1 even if CONFIG_HAS_DMA is not set, so that drivers and subsystems can
use it without ifdefs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
William Breathitt Gray [Wed, 8 Nov 2017 15:23:11 +0000 (10:23 -0500)]
isa: Prevent NULL dereference in isa_bus driver callbacks
commit
5a244727f428a06634f22bb890e78024ab0c89f3 upstream.
The isa_driver structure for an isa_bus device is stored in the device
platform_data member of the respective device structure. This
platform_data member may be reset to NULL if isa_driver match callback
for the device fails, indicating a device unsupported by the ISA driver.
This patch fixes a possible NULL pointer dereference if one of the
isa_driver callbacks to attempted for an unsupported device. This error
should not occur in practice since ISA devices are typically manually
configured and loaded by the users, but we may as well prevent this
error from popping up for the 0day testers.
Fixes:
a5117ba7da37 ("[PATCH] Driver model: add ISA bus")
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Wed, 15 Nov 2017 21:00:45 +0000 (13:00 -0800)]
firmware: vpd: Fix platform driver and device registration/unregistration
commit
0631fb8b027f5968c2f5031f0b3ff7be3e4bebcc upstream.
The driver exit function needs to unregister both platform device and
driver. Also, during registration, register driver first and perform
error checks.
Fixes:
049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Wed, 15 Nov 2017 21:00:44 +0000 (13:00 -0800)]
firmware: vpd: Tie firmware kobject to device lifetime
commit
e4b28b3c3a405b251fa25db58abe1512814a680a upstream.
It doesn't make sense to have /sys/firmware/vpd if the device is not
instantiated, so tie its lifetime to the device.
Fixes:
049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Wed, 15 Nov 2017 21:00:43 +0000 (13:00 -0800)]
firmware: vpd: Destroy vpd sections in remove function
commit
811d7e0215fb738fb9a9f0bcb1276516ad161ed1 upstream.
vpd sections are initialized during probe and thus should be destroyed
in the remove function.
Fixes:
049a59db34eb ("firmware: Google VPD sysfs driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin H. Johnson [Thu, 16 Nov 2017 22:36:12 +0000 (14:36 -0800)]
firmware: cleanup FIRMWARE_IN_KERNEL message
commit
0946b2fb38fdb6585a5ac3ca84ac73924f645952 upstream.
The help for FIRMWARE_IN_KERNEL still references the firmware_install
command that was recently removed by commit
5620a0d1aacd ("firmware:
delete in-kernel firmware").
Clean up the message to direct the user to their distribution's
linux-firmware package, and remove any reference to firmware being
included in the kernel source tree.
Fixes:
5620a0d1aacd ("firmware: delete in-kernel firmware").
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Meyer [Tue, 14 Nov 2017 20:06:47 +0000 (13:06 -0700)]
hv: kvp: Avoid reading past allocated blocks from KVP file
commit
297d6b6e56c2977fc504c61bbeeaa21296923f89 upstream.
While reading in more than one block (50) of KVP records, the allocation
goes per block, but the reads used the total number of allocated records
(without resetting the pointer/stream). This causes the records buffer to
overrun when the refresh reads more than one block over the previous
capacity (e.g. reading more than 100 KVP records whereas the in-memory
database was empty before).
Fix this by reading the correct number of KVP records from file each time.
Signed-off-by: Paul Meyer <Paul.Meyer@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
K. Y. Srinivasan [Tue, 14 Nov 2017 13:53:33 +0000 (06:53 -0700)]
Drivers: hv: vmbus: Fix a rescind issue
commit
7fa32e5ec28b1609abc0b797b58267f725fc3964 upstream.
The current rescind processing code will not correctly handle
the case where the host immediately rescinds a channel that has
been offerred. In this case, we could be blocked in the open call and
since the channel is rescinded, the host will not respond and we could
be blocked forever in the vmbus open call.i Fix this problem.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gregory CLEMENT [Tue, 14 Nov 2017 16:51:50 +0000 (17:51 +0100)]
pinctrl: armada-37xx: Fix direction_output() callback behavior
commit
6702abb3bf2394f250af0ee04070227bb5dda788 upstream.
The direction_output callback of the gpio_chip structure is supposed to
set the output direction but also to set the value of the gpio. For the
armada-37xx driver this callback acted as the gpio_set_direction callback
for the pinctrl.
This patch fixes the behavior of the direction_output callback by also
applying the value received as parameter.
Fixes:
5715092a458c ("pinctrl: armada-37xx: Add gpio support")
Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Blumenstingl [Tue, 31 Oct 2017 20:01:45 +0000 (21:01 +0100)]
iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and REG13
commit
96748823c483c6eed8321f78bd128dd33f09c55c upstream.
The Meson GXBB and newer SoCs have a few more registers than the older
Meson8 and Meson8b SoCs.
Use a separate regmap config to limit the older SoCs to the DELTA_10
register.
Fixes:
6c76ed31cd05 ("iio: adc: meson-saradc: add Meson8b SoC compatibility")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Blumenstingl [Tue, 31 Oct 2017 20:01:44 +0000 (21:01 +0100)]
iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs
commit
d85eed9f576369bc90322659de96b7dbea1f9a57 upstream.
Meson8 and Meson8b do not have the MESON_SAR_ADC_REG11 register. The
bandgap setting for these SoCs is configured in the
MESON_SAR_ADC_DELTA_10 register instead.
Make the driver aware of this difference and use the correct bandgap
register depending on the SoC.
This has worked fine on Meson8 and Meson8b because the bootloader is
already initializing the bandgap setting.
Fixes:
6c76ed31cd05 ("iio: adc: meson-saradc: add Meson8b SoC compatibility")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Blumenstingl [Tue, 31 Oct 2017 20:01:43 +0000 (21:01 +0100)]
iio: adc: meson-saradc: fix the bit_idx of the adc_en clock
commit
7a6b0420d2fe4ce59437bd318826fe468f0d71ae upstream.
Meson8 and Meson8b SoCs use the the SAR ADC gate clock provided by the
MESON_SAR_ADC_REG3 register within the SAR ADC register area.
According to the datasheet (and the existing MESON_SAR_ADC_REG3_CLK_EN
definition) the gate is on bit 30.
The fls() function returns the last set bit, which is "bit index + 1"
(fls(MESON_SAR_ADC_REG3_CLK_EN) returns 31). Fix this by switching to
__ffs() which returns the first set bit, which is bit 30 in our case.
This off by one error results in the ADC not being usable on devices
where the bootloader did not enable the clock.
Fixes:
3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pan Bian [Sun, 12 Nov 2017 16:01:20 +0000 (00:01 +0800)]
iio: adc: cpcap: fix incorrect validation
commit
81b039ec36a41a5451e1e36f05bb055eceab1dc8 upstream.
Function platform_get_irq_byname() returns a negative error code on
failure, and a zero or positive number on success. However, in function
cpcap_adc_probe(), positive IRQ numbers are also taken as error cases.
Use "if (ddata->irq < 0)" instead of "if (!ddata->irq)" to validate the
return value of platform_get_irq_byname().
Signed-off-by: Pan Bian <bianpan2016@163.com>
Fixes:
25ec249632d50 ("iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC")
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Meerwald-Stadler [Fri, 27 Oct 2017 19:45:31 +0000 (21:45 +0200)]
iio: health: max30102: Temperature should be in milli Celsius
commit
ad44a9f804c1591ba2a2ec0ac8d916a515d2790c upstream.
As per ABI temperature should be in milli Celsius after scaling,
not Celsius
Note on stable cc. This driver is breaking the standard IIO
ABI. (JC)
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 6 Sep 2017 12:56:50 +0000 (14:56 +0200)]
iio: stm32: fix adc/trigger link error
commit
6d745ee8b5e81f3a33791e3c854fbbfd6f3e585e upstream.
The ADC driver can trigger on either the timer or the lptim
trigger, but it only uses a Kconfig 'select' statement
to ensure that the first of the two is present. When the lptim
trigger is enabled as a loadable module, and the adc driver
is built-in, we now get a link error:
drivers/iio/adc/stm32-adc.o: In function `stm32_adc_get_trig_extsel':
stm32-adc.c:(.text+0x4e0): undefined reference to `is_stm32_lptim_trigger'
We could use a second 'select' statement and always have both
trigger drivers enabled when the adc driver is, but it seems that
the lptimer trigger was intentionally left optional, so it seems
better to keep it that way.
This adds a hack to use 'IS_REACHABLE()' rather than 'IS_ENABLED()',
which avoids the link error, but instead leads to the lptimer trigger
not being used in the broken configuration. I've added a runtime
warning for this case to help users figure out what they did wrong
if this should ever be done by accident.
Fixes:
f0b638a7f6db ("iio: adc: stm32: add support for lptimer triggers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
weiping zhang [Wed, 29 Nov 2017 01:23:01 +0000 (09:23 +0800)]
virtio: release virtio index when fail to device_register
commit
e60ea67bb60459b95a50a156296041a13e0e380e upstream.
index can be reused by other virtio device.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephane Grosjean [Thu, 7 Dec 2017 15:13:43 +0000 (16:13 +0100)]
can: peak/pcie_fd: fix potential bug in restarting tx queue
commit
91785de6f94b58c3fb6664609e3682f011bd28d2 upstream.
Don't rely on can_get_echo_skb() return value to wake the network tx
queue up: can_get_echo_skb() returns 0 if the echo array slot was not
occupied, but also when the DLC of the released echo frame was 0.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kelly [Tue, 5 Dec 2017 19:15:50 +0000 (11:15 -0800)]
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
commit
12147edc434c9e4c7c2f5fee2e5519b2e5ac34ce upstream.
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kelly [Tue, 5 Dec 2017 19:15:48 +0000 (11:15 -0800)]
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
commit
7a31ced3de06e9878e4f9c3abe8f87d9344d8144 upstream.
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kelly [Tue, 5 Dec 2017 19:15:47 +0000 (11:15 -0800)]
can: ems_usb: cancel urb on -EPIPE and -EPROTO
commit
bd352e1adfe0d02d3ea7c8e3fb19183dc317e679 upstream.
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kelly [Tue, 5 Dec 2017 18:34:03 +0000 (10:34 -0800)]
can: mcba_usb: cancel urb on -EPROTO
commit
c7f33023308f3142433b7379718af5f0c2c322a6 upstream.
When we unplug the device, we can see both -EPIPE and -EPROTO depending
on exact timing and what system we run on. If we continue to resubmit
URBs, they will immediately fail, and they can cause stalls, especially
on slower CPUs.
Fix this by not resubmitting on -EPROTO, as we already do on -EPIPE.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kelly [Tue, 5 Dec 2017 19:15:49 +0000 (11:15 -0800)]
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
commit
6aa8d5945502baf4687d80de59b7ac865e9e666b upstream.
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jimmy Assarsson [Tue, 21 Nov 2017 07:22:28 +0000 (08:22 +0100)]
can: kvaser_usb: ratelimit errors if incomplete messages are received
commit
8bd13bd522ff7dfa0eb371921aeb417155f7a3be upstream.
Avoid flooding the kernel log with "Formate error", if incomplete message
are received.
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jimmy Assarsson [Tue, 21 Nov 2017 07:22:27 +0000 (08:22 +0100)]
can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()
commit
e84f44eb5523401faeb9cc1c97895b68e3cfb78d upstream.
The conditon in the while-loop becomes true when actual_length is less than
2 (MSG_HEADER_LEN). In best case we end up with a former, already
dispatched msg, that got msg->len greater than actual_length. This will
result in a "Format error" error printout.
Problem seen when unplugging a Kvaser USB device connected to a vbox guest.
warning: comparison between signed and unsigned integer expressions
[-Wsign-compare]
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jimmy Assarsson [Tue, 21 Nov 2017 07:22:26 +0000 (08:22 +0100)]
can: kvaser_usb: free buf in error paths
commit
435019b48033138581a6171093b181fc6b4d3d30 upstream.
The allocated buffer was not freed if usb_submit_urb() failed.
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Stäbler [Mon, 20 Nov 2017 13:45:15 +0000 (14:45 +0100)]
can: ti_hecc: Fix napi poll return value for repoll
commit
f6c23b174c3c96616514827407769cbcfc8005cf upstream.
After commit
d75b1ade567f ("net: less interrupt masking in NAPI") napi
repoll is done only when work_done == budget.
So we need to return budget if there are still packets to receive.
Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Kleine-Budde [Mon, 27 Nov 2017 08:18:21 +0000 (09:18 +0100)]
can: flexcan: fix VF610 state transition issue
commit
29c64b17a0bc72232acc45e9533221d88a262efb upstream.
Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for VF610 to report correct state
transitions.
Tested-by: Mirza Krak <mirza.krak@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephane Grosjean [Thu, 23 Nov 2017 14:44:35 +0000 (15:44 +0100)]
can: peak/pci: fix potential bug when probe() fails
commit
5c2cb02edf79ad79d9b8d07c6d52243a948c4c9f upstream.
PCI/PCIe drivers for PEAK-System CAN/CAN-FD interfaces do some access to the
PCI config during probing. In case one of these accesses fails, a POSITIVE
PCIBIOS_xxx error code is returned back. This POSITIVE error code MUST be
converted into a NEGATIVE errno for the probe() function to indicate it
failed. Using the pcibios_err_to_errno() function, we make sure that the
return code will always be negative.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>