tcg: Rename TB_JMP_RESET_OFFSET_INVALID to TB_JMP_OFFSET_INVALID

This will shortly be used for more than reset.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_out_goto_tb

The INDEX_op_goto_tb opcode needs no register allocation.
Split out a dedicated helper function for it.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Introduce get_jmp_target_addr

Similar to the existing set_jmp_reset_offset.  Include the
rw->rx address space conversion done by arm and s390x, and
forgotten by mips and riscv.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Introduce set_jmp_insn_offset

Similar to the existing set_jmp_reset_offset.  Move any assert for
TCG_TARGET_HAS_direct_jump into the new function (which now cannot
be build-time).  Will be unused if TCG_TARGET_HAS_direct_jump is
constant 0, but we can't test for constant in the preprocessor,
so just mark it G_GNUC_UNUSED.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Replace asserts on tcg_jmp_insn_offset

Test TCG_TARGET_HAS_direct_jump instead of testing an
implementation pointer.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/sparc64: Remove unused goto_tb code for indirect jump

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/ppc: Remove unused goto_tb code for indirect jump

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: Remove unused goto_tb code for indirect jump

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_out_exit_tb

The INDEX_op_exit_tb opcode needs no register allocation.
Split out a dedicated helper function for it.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-tcg-20230116' of https://gitlab.com/rth7680/qemu into staging

- Reorg cpu_tb_exec around setjmp.
- Use __attribute__((target)) for buffer_is_zero.
- Add perfmap and jitdump for perf support.

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmPFtXgdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+62Af/YLdd77+IO8wcPN1n
# 2esKNlrrYQ2/x40Hede6L4pp+Qz6M810YgNbhMchBS3u8YGIFzmVLaiz5N4nBGTq
# ricOit6Jj2KonlxWaxgma1BW36ydBIwphC20WjrLTVgdNGvxmy4JKbfklTd4oIZ+
# +Kf1VTN1bbt7vfDntd454ck2rhtVZBEvYTynikA3LJ1W7EVN5etDUnrN3VwbaTTK
# 0aY8MbDfGUASyrDzmaRcF5F90K+V2STuEUs1whgOuTBusZ6n3+FSDhW8CuDhsy/l
# rXtPkQba3rtUWfJ1+o7bx3Gg4nbfn/9lxIfGwhQ79ywD9InjqLqu9etwVyhijx+n
# k+tvPw==
# =xFfF
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 Jan 2023 20:37:12 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* tag 'pull-tcg-20230116' of https://gitlab.com/rth7680/qemu:
  accel/tcg: Split out cpu_exec_{setjmp,loop}
  util/bufferiszero: Use __attribute__((target)) for avx2/avx512
  tcg: add perfmap and jitdump
  accel/tcg: Add debuginfo support
  linux-user: Clean up when exiting due to a signal

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

accel/tcg: Split out cpu_exec_{setjmp,loop}

Recently the g_assert(cpu == current_cpu) test has been
intermittently failing with gcc.  Reorg the code around
the setjmp to minimize the lifetime of the cpu variable
affected by the setjmp.

This appears to fix the existing issue with clang as well.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1147
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

util/bufferiszero: Use __attribute__((target)) for avx2/avx512

Use the attribute, which is supported by clang, instead of
the #pragma, which is not supported and, for some reason,
also not detected by the meson probe, so we fail by -Werror.

Include only <immintrin.h> as that is the outermost "official"
header for these intrinsics -- emmintrin.h and smmintrin -- are
older SSE2 and SSE4 specific headers, while the immintrin.h
includes all of the Intel intrinsics.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: add perfmap and jitdump

Add ability to dump /tmp/perf-<pid>.map and jit-<pid>.dump.
The first one allows the perf tool to map samples to each individual
translation block. The second one adds the ability to resolve symbol
names, line numbers and inspect JITed code.

Example of use:

    perf record qemu-x86_64 -perfmap ./a.out
    perf report

or

    perf record -k 1 qemu-x86_64 -jitdump ./a.out
    DEBUGINFOD_URLS= perf inject -j -i perf.data -o perf.data.jitted
    perf report -i perf.data.jitted

Co-developed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Co-developed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

accel/tcg: Add debuginfo support

Add libdw-based functions for loading and querying debuginfo. Load
debuginfo from the system and the linux-user loaders.

This is useful for the upcoming perf support, which can then put
human-readable guest symbols instead of raw guest PCs into perfmap and
jitdump files.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

linux-user: Clean up when exiting due to a signal

When exiting due to an exit() syscall, qemu-user calls
preexit_cleanup(), but this is currently not the case when exiting due
to a signal. This leads to various buffers not being flushed (e.g.,
for gprof, for gcov, and for the upcoming perf support).

Add the missing call.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112152013.125680-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'm68k-next-pull-request' of https://github.com/vivier/qemu-m68k into staging

M68K pull request 20230116

fix FPSR quotient byte

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmPFFmsSHGxhdXJlbnRA
# dml2aWVyLmV1AAoJEPMMOL0/L748Dk4P+QH1tlWGWzOiuKZOSUjdJ3NDEw+xpGhH
# oS7I7swiz30RCJUJx9R2nL7u5lBN7kcP0duNDp58gwkmReuotrx5HYeN4WwTh/94
# 78CWDKMMT59ag0dA+41WxhXE2sQ6uVgDTtSXTH/1c4rCEm1NuXa+LGBD8oh0IxxW
# K0/OHfySQvK3mLRrZtx8h6Ug77Hj5AjYKJZ1tONAe0SkcTe/qXkA4npluVnJl+TQ
# /M31uzAD98Td0tSd6YxACkpV++JqEF6Uenbe0iT4A1izRa6GJb56xp+ENeUCavpD
# vh5MmJeqTfe/jvdzjWqLv0v88Z+U/TQ8VvvBAUn7aThVo5f/Njclkaxx/i581zpE
# pT6jCMxZYKCFdXH+QFqX6B9YBa0fTUxwynWQovIs9bwuWfRYA9IvHLCSWUZHZITi
# GQSPbioPcIi4Hc/EJMeRhnZl/9TcGE0tnc+Agib/WI5QaE8Hmj26b7+5v3vxgqQV
# vZ3HWOFSZ4sK3MoIsYoKqoRhFX8DtMqXsf70xKBWn5Yx1kol7vz34UYisLaQFJPZ
# NBKtVPbyAbMP37h7OMzToiGWw0pitgAERHoj7Qq0juT7U9mjfV/xacdniLMPbSUq
# UKzEYgEBNU1728A2TKJUZiXwrdQOx/nZQwJljYMG5RE9ePkhPJ3UvRWMRdxopT+f
# 3Lvgvj+qZ8Aq
# =VVZK
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 Jan 2023 09:18:35 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* tag 'm68k-next-pull-request' of https://github.com/vivier/qemu-m68k:
  target/m68k: fix FPSR quotient byte for frem instruction
  target/m68k: fix FPSR quotient byte for fmod instruction
  target/m68k: pass sign directly into make_quotient()
  target/m68k: pass quotient directly into make_quotient()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/qtest/qom-test: Do not print tested properties by default

We're still running into the problem that some logs are cut in the
gitlab-CI since they got too big. The biggest part of the log is
still the output of the qom-test. Let's stop printing the properties
by default to get to a saner size here. The full output can still
be enabled by setting V=2 (or higher) in the environment.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221215153036.422362-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'mips-20230113' of https://github.com/philmd/qemu into staging

MIPS patches queue

A bunch of cleanups from various people.

- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmPBekAACgkQ4+MsLN6t
# wN4wjxAAtYxyt6WUBpiYfV/LnbQFpAsacues1Vhy9MPYEg5a/iuXWKvWtgRYvGww
# qR0GVQH8rH7tgnCZK+ioq9jX+hvfBskP6CnKhxmb5zDGm7vP7jhhu8UFWY/EtBgq
# 0zpNeLMXtnRJ6PBqo/nWFCVtcpDRZ6IkSbpGWkVkciRFc5n/2VCnlIj8k2I1oMvL
# 11cp2xFQnaPReFXIpMjJHuHv1NObykdlvVg6wQo/A/4qIb8EvJQEPmePjG9Sf0i0
# v2dhnnxG9mze7+uq0dIC16x8Azko3N7dmtNlBU/aGb9OELwx35aux2M4dNDVogwn
# DqL/Wsk54TFewECOfS48t/a/TqV8j/ISW1d/JvovBrN2KovmIAbtqHuMUqKVk5l0
# 23ZOIIPIYwmScZwIlkCIGUuIzFig1zhEmQcoEQaFe/B0oLB2eN/x0Bk9Yklo+i2A
# WNiyiAj7k5492qEdndOySEEDVt6886F/+CdQ6QYF5Z1L/ELck7XHBH3mGDznWpPn
# 6IURyVquPJx7ul62jSGI+Gc+qakNoahIhPo5O7hklOM9GwWNOWXHveyb7xjs7j+O
# eWyVcet+o7hoHkCzmfbyTPySI4qCpF9fA42jqPhATwQPwmGXpbr+4BxUq3KtE43y
# w9tEigwd4voN3dWLItVh6QE4in70osz3XHp93byvo8bHlS0huVY=
# =oXX+
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Jan 2023 15:35:28 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* tag 'mips-20230113' of https://github.com/philmd/qemu: (46 commits)
  scripts/git.orderfile: Display MAINTAINERS changes first
  target/mips: Restrict 'qapi-commands-machine.h' to system emulation
  hw/mips/boston: Rename MachineState 'mc' pointer to 'ms'
  hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header
  hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code
  hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code
  hw/pci-host/bonito: Convert to 3-phase reset
  softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818
  hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent
  hw/core/qdev-properties-system: Allow the 'slew' policy only on x86
  hw/intc: Extract the IRQ counting functions into a separate file
  hw/intc/i8259: Make using the isa_pic singleton more type-safe
  hw/usb/hcd-uhci: Introduce TYPE_ defines for device models
  hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig
  hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specific
  hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific
  hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()
  hw/pci/pci_host: Trace config accesses on unexisting functions
  mips: Always include nanomips disassembler
  mips: Remove support for trap and emulate KVM
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/m68k: fix FPSR quotient byte for frem instruction

The FPSR quotient byte should be set to the value of the quotient and not the
result. Manually calculate the quotient in the frem helper in round to nearest
even mode (note this is different from the quotient calculated internally for
fmod), and use it to set the quotient byte accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1314
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114232959.118224-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: fix FPSR quotient byte for fmod instruction

The FPSR quotient byte should be set to the value of the quotient and not the
result. Switch from using floatx80_mod() to floatx80_modrem() which returns
the quotient as a uint64_t which can be used for the quotient byte.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114232959.118224-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: pass sign directly into make_quotient()

This enables the quotient parameter to be changed from int32_t to uint32_t and
also allows the extra sign logic in make_quotient() to be removed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230114232959.118224-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/m68k: pass quotient directly into make_quotient()

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114232959.118224-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

scripts/git.orderfile: Display MAINTAINERS changes first

If we get custom to see MAINTAINERS changes first,
we might catch missing MAINTAINERS updates easier.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221216225505.26052-1-philmd@linaro.org>

target/mips: Restrict 'qapi-commands-machine.h' to system emulation

Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.

Extract the QMP functions from cpu.c (which is always compiled) to
the new 'sysemu/mips-qmp-cmds.c' unit (which is only compiled when
system emulation is selected).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219211034.70491-4-philmd@linaro.org>

hw/mips/boston: Rename MachineState 'mc' pointer to 'ms'

Follow the QEMU convention of naming MachineState pointers as 'ms' by
renaming the instance in create_fdt() where we're calling it 'mc'.

Cc: Paul Burton <paulburton@kernel.org>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20230111172133.334735-1-dbarboza@ventanamicro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header

Declare the TYPE_BONITO_PCI_HOST_BRIDGE QOM type in a
header to be able to access it from board code.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-8-philmd@linaro.org>

hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code

To make it easier to differentiate between the Host Bridge
object and its PCI function #0, rename bonito* as bonito_pci*.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-4-philmd@linaro.org>

hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code

To make it easier to differentiate between the Host Bridge
object and its PCI function #0, rename bonito_pcihost* as
bonito_host*.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-3-philmd@linaro.org>

hw/pci-host/bonito: Convert to 3-phase reset

Convert the TYPE_PCI_BONITO class to use 3-phase reset.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230105130710.49264-2-philmd@linaro.org>

softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818

The 'slew' lost tick policy is only available on systems with a mc146818
RTC. On other systems, "-rtc driftfix=slew" is currently silently ignored.
Let's emit at least a warning in this case to make the users aware that
there is something wrong in their command line settings.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230110095351.611724-5-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent

The only reason for this code being target dependent was the IRQ-counting
related code in rtc_policy_slew_deliver_irq(). Since these functions have
been moved into a new, separate file (kvm_irqcount.c) which is now always
compiled and linked if necessary, we can get rid of the #ifdef TARGET_I386
switches in mc146818rtc.c and declare it in the softmmu_ss instead of
specific_ss, so that the code only gets compiled once for all targets.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230110095351.611724-4-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/core/qdev-properties-system: Allow the 'slew' policy only on x86

The 'slew' tick policy is currently enforced to be only available on
x86 via some "#ifdef TARGET_I386" statements in mc146818rtc.c. We
want to get rid of those #ifdefs, so we need a different way of
checking whether the policy is allowed or not. Using the setter
function in hw/core/qdev-properties-system.c seems to be a good
place, so let's add a check here.

Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230110095351.611724-3-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/intc: Extract the IRQ counting functions into a separate file

These IRQ counting functions will soon be required in binaries that
do not include the APIC code, too, so let's extract them into a
separate file that can be linked independently of the APIC code.

While we're at it, change the apic_* prefix into kvm_* since the
functions are used from the i8259 PIC (i.e. not the APIC), too.

Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230110095351.611724-2-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/intc/i8259: Make using the isa_pic singleton more type-safe

This even spares some casts in hot code paths along the way.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109172347.1830-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/usb/hcd-uhci: Introduce TYPE_ defines for device models

Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221204190553.3274-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig

Tracking dependencies via Kconfig seems much cleaner.

Note that PIIX4 already depends on ACPI_PIIX4.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230109172347.1830-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specific

pci_map_irq_fn's in general seem to be board-specific, and PIIX4's
pci_slot_get_pirq() in particular seems very Malta-specific. So move the
latter to malta.c to 1/ keep the board logic in one place and 2/ avoid
PIIX4 to make assumptions about its board.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109172347.1830-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific

pci_map_irq_fn's in general seem to be board-specific. So move PIIX3's
pci_slot_get_pirq() to board code to not have PIIX3 make assuptions
about its board.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109172347.1830-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()

pci_bus_irqs() coupled together the assignment of pci_set_irq_fn and
pci_map_irq_fn to a PCI bus. This coupling gets in the way when the
pci_map_irq_fn is board-specific while the pci_set_irq_fn is device-
specific.

For example, both of QEMU's PIIX south bridge models have different
pci_map_irq_fn implementations which are board-specific rather than
device-specific. These implementations should therefore reside in board
code. The pci_set_irq_fn's, however, should stay in the device models
because they access memory internal to the model.

Factoring out pci_bus_map_irqs() from pci_bus_irqs() allows the
assignments to be decoupled, resolving the problem described above.

Note also how pci_vpb_realize() which gets touched in this commit
assigns different pci_map_irq_fn's depending on the board.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109172347.1830-5-shentey@gmail.com>
[PMD: Factor out in vfu_object_set_bus_irq()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

hw/pci/pci_host: Trace config accesses on unexisting functions

Currently we only emit trace events for existing PCI functions.
In order to ease debugging PCI enumeration process, also emit
for unexisting functions:

  $ qemu-system-foo -trace pci_cfg_\*
  ...
  pci_cfg_read empty 00:0a.4 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0a.5 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0a.6 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0a.7 @0x0 -> 0xffffffff
  pci_cfg_read pcnet 00:0b.0 @0x0 -> 0x20001022
  pci_cfg_read empty 00:0c.0 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0d.0 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0e.0 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:0f.0 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:10.0 @0x0 -> 0xffffffff
  pci_cfg_read empty 00:11.0 @0x0 -> 0xffffffff
  pci_cfg_read cirrus-vga 00:12.0 @0x0 -> 0xb81013

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-2-philmd@linaro.org>

mips: Always include nanomips disassembler

Since the nanomips disassembler is not C++ code anymore, it need not
depend on link_language == cpp.  Always include it and remove the
CONFIG_NANOMIPS_DIS symbol.

Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230110084942.299460-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

Merge tag 'pull-target-arm-20230113' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 hw/arm/stm32f405: correctly describe the memory layout
 hw/arm: Add Olimex H405 board
 cubieboard: Support booting from an SD card image with u-boot on it
 target/arm: Fix sve_probe_page
 target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled
 various code cleanups

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmPBZmYZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rDdD/9GlrH14yP/2WQZJVJxzXkf
# ltO1pvX/AfeNPGy3F8T+kncKspIUeJ8BQNrZKYPWkH1WgAAT3lVH/cUbAlr8UD6W
# p2t64ZdQAURuEw3kqtyUVOUeIxzg29cEQyW/9uchA3QPb9xDtiq6KLpAzifDzo6o
# 2JE4/NytUJSKxFr5hnyxRTtOYPEMLShBSPvPzU0/BPq7VPyPhT4rqojhpx9uZpVc
# h4mfVm9cpF0y3ThBR37M0nhEGJywB/6zOsZ49bm06MFFTwasZ4P0w0fcKhbvrFvX
# PHVlNOvyT1oxch5ErN+KULZLByiWy0/Nw85V8P9R+1hU6nncQPM5paB6Y5HUCTKv
# wa9gp38V8323fsHg2EEV/PYRdcmRWSBHOq9HPDjIIJlG9nvfXn9O69kDlhnst44b
# Fz27XiGJOKY+f20l0J0KzaOnnjw54aeo5tc5WUDbBiZ/btsAHBGQAg7JghmoLkhb
# rlvJFgGdG99IuBqJH69dJQ8n/R9bGDRu6X0i1ir3d3C2nY9HYaWUZMyyxOw9dV43
# igQHupOzyYbSyy9+40xz611P0h2k2d90P61Vi41D9ig4Du+I4Vftjqj9mi/Z829k
# W1JE5wpKWcDeIXFYLWCZuiOyTCCFBWiWgDJz/zQf7AYma0AWA9gpKrTh2+3EFfqy
# VsvMR2T6kmS3FId50bW5OQ==
# =D+ib
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Jan 2023 14:10:46 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20230113' of https://git.linaro.org/people/pmaydell/qemu-arm: (38 commits)
  target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled
  hw/timer/xilinx_timer: Use XpsTimerState instead of 'struct timerblock'
  hw/intc/xilinx_intc: Use 'XpsIntc' typedef instead of 'struct xlx_pic'
  hw/misc/sbsa_ec: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()
  hw/misc/sbsa_ec: Rename TYPE_SBSA_EC -> TYPE_SBSA_SECURE_EC
  hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()
  hw/arm/bcm2836: Remove definitions generated by OBJECT_DECLARE_TYPE()
  hw/arm/stellaris: Use CamelCase for STELLARIS_ADC type name
  hw/arm/stellaris: Drop useless casts from void * to pointer
  hw/intc/omap_intc: Use CamelCase for TYPE_OMAP_INTC type name
  hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP2_GPIO type name
  hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP1_GPIO type name
  hw/arm/omap: Drop useless casts from void * to pointer
  hw/gpio/omap_gpio: Add local variable to avoid embedded cast
  hw/arm/pxa: Avoid forward-declaring PXA2xxI2CState
  hw/arm: Remove unreachable code calling pflash_cfi01_register()
  hw/arm/vexpress: Remove dead code in vexpress_common_init()
  hw/arm/z2: Use the IEC binary prefix definitions
  hw/arm/omap_sx1: Use the IEC binary prefix definitions
  hw/arm/omap_sx1: Remove unused 'total_ram' definitions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled

ARM trusted firmware, when built with FEAT_HCX support, sets SCR_EL3.HXEn bit
to allow EL2 to modify HCRX_EL2 register without trapping it in EL3. Qemu
uses a valid mask to clear unsupported SCR_EL3 bits when emulating SCR_EL3
write, and that mask doesn't include SCR_EL3.HXEn bit even if FEAT_HCX is
enabled and exposed to the guest. As a result EL3 writes of that bit are
ignored.

Cc: qemu-stable@nongnu.org
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Message-id: 20230105221251.17896-4-eiakovlev@linux.microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

mips: Remove support for trap and emulate KVM

This support was limited to the Malta board, drop it.
I do not have a machine that can run VZ KVM, so I am assuming
that it works for -M malta as well.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221221091718.71844-1-philmd@linaro.org>

hw/isa/piix4: Correct IRQRC[A:D] reset values

IRQRC[A:D] registers reset value is 0x80. We were forcing
the MIPS Malta machine routing to be able to boot a Linux
kernel without any bootloader.
We now have these registers initialized in the Malta machine
write_bootloader(), so we can use the correct reset values.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221027204720.33611-4-philmd@linaro.org>

hw/mips/malta: Set PIIX4 IRQ routes in embedded bootloader

Linux kernel expects the northbridge & southbridge chipsets
configured by the BIOS firmware. We emulate that by writing
a tiny bootloader code in write_bootloader().

Upon introduction in commit 5c2b87e34d ("PIIX4 support"),
the PIIX4 configuration space included values specific to
the Malta board.

Set the Malta-specific IRQ routing values in the embedded
bootloader, so the next commit can remove the Malta specific
bits from the PIIX4 PCI-ISA bridge and make it generic
(matching the real hardware).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221027204720.33611-3-philmd@linaro.org>

hw/mips/malta: Introduce PIIX4_PCI_DEVFN definition

The PIIX4 PCI-ISA bridge function is always located at 10:0.
Since we want to re-use its address, add the PIIX4_PCI_DEVFN
definition.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221027204720.33611-2-philmd@linaro.org>

hw/mips/malta: Merge common BL code as bl_setup_gt64120_jump_kernel()

Merge common code shared between write_bootloader() and
write_bootloader_nanomips() into bl_setup_gt64120_jump_kernel().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-12-philmd@linaro.org>

hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (5/5)

Part 5/5: Convert jumping to kernel

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-11-philmd@linaro.org>

hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (4/5)

Part 4/5: Convert GT64120 ISD base address setup

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-10-philmd@linaro.org>

hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (3/5)

Part 3/5: Convert PCI0 I/O BAR setup

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-9-philmd@linaro.org>

hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (2/5)

Part 2/5: Convert PCI0 MEM0 BAR setup

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-8-philmd@linaro.org>

hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (1/5)

Similarly to how commit 0c8427baf0 ("hw/mips/malta: Use bootloader
helper to set BAR registers") converted write_bootloader(), convert
the equivalent write_bootloader_nanomips(), allowing us to modify
the bootloader code more easily in the future.

Part 1/5: Convert PCI0 MEM1 BAR setup

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-7-philmd@linaro.org>

hw/mips/bootloader: Implement nanoMIPS JALRc opcode generator

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-6-philmd@linaro.org>

hw/mips/bootloader: Implement nanoMIPS LI (LUI+ORI) opcode generator

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-5-philmd@linaro.org>

hw/mips/bootloader: Implement nanoMIPS SW opcode generator

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-4-philmd@linaro.org>

hw/mips/bootloader: Implement nanoMIPS NOP opcode generator

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221211204533.85359-3-philmd@linaro.org>

hw/mips/bootloader: Handle buffers as opaque arrays

It is irrelevant to the API what the buffers to fill are made of.
In particular, some MIPS ISA have 16-bit wide instructions.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221211204533.85359-2-philmd@linaro.org>

tests/avocado: Add tests booting YAMON ROM on MIPS Malta machines

Add quick tests booting YAMON:

  $ avocado --show=app,console run -t machine:malta tests/avocado/machine_mips_malta.py
   (1/2) tests/avocado/machine_mips_malta.py:MaltaMachine.test_mipsel_malta_yamon:
  console: YAMON ROM Monitor, Revision 02.22.
  console: Copyright (c) 1999-2007 MIPS Technologies, Inc. - All Rights Reserved.
  console: For a list of available commands, type 'help'.
  console: Compilation time =              May 24 2013  12:16:34 (pburton)
  console: Board type/revision =           0x02 (Malta) / 0x00
  console: Core board type/revision =      0x01 (CoreLV) / 0x00
  console: System controller/revision =    Galileo / GT_64120A-B-0
  console: FPGA revision =                 0x0000
  console: MAC address =                   ff.ff.ff.ff.ff.ff
  console: Board S/N =                     0123456789
  console: PCI bus frequency =             33.33 MHz
  console: Processor Company ID/options =  0x01 (MIPS Technologies, Inc.) / 0x00
  console: Processor ID/revision =         0x93 (MIPS 24Kf) / 0x00
  console: Endianness =                    Little
  console: CPU/Bus frequency =             333 MHz / 419 MHz
  console: Coherency =                     None
  console: Flash memory size =             4 MByte
  console: SDRAM size =                    128 MByte
  console: First free SDRAM address =      0x800c32f0
  console: WARNING: Environment variable flash area is invalid!
  console: HINT   : Perform "erase -e"
  console: YAMON>
  PASS (1.88 s)
   (2/2) tests/avocado/machine_mips_malta.py:MaltaMachine.test_mips64el_malta_yamon:
  ...
  console: System controller/revision =    Galileo / GT_64120A-B-0
  console: Processor Company ID/options =  0x01 (MIPS Technologies, Inc.) / 0x00
  console: Processor ID/revision =         0x82 (MIPS 20Kc) / 0xa0
  ...
  console: YAMON>
  PASS (1.89 s)
  RESULTS    : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
  JOB TIME   : 4.57 s

YAMON does some endian-swapped acceses on the ISD<->PCI CFG/DATA
registers. These tests are useful to debug cross-endianness issues,
in particular on big-endian host.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-7-philmd@linaro.org>

hw/mips/gt64xxx_pci: Move it to hw/pci-host/

The GT-64120 is a north-bridge, and it is not MIPS specific.
Move it with the other north-bridge devices.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221209151533.69516-8-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/meson: Make gt64xxx_pci.c endian-agnostic

The single machine using this device explicitly sets its
endianness. We don't need to set a default. This allow us
to remove the target specificity from the build system.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20221209151533.69516-7-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/malta: Explicit GT64120 endianness upon device creation

Propagate the controller endianess from the machine, setting
the "cpu-little-endian" property.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221209151533.69516-6-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/gt64xxx_pci: Add a 'cpu-little-endian' qdev property

This device does not have to be TARGET-dependent.
Add a 'cpu_big_endian' property which sets the byte-swapping
options if required.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221220113436.14299-5-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/gt64xxx_pci: Manage endian bits with the RegisterFields API

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221220113436.14299-4-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/gt64xxx_pci: Let the GT64120 manage the lower 512MiB hole

Per the comment in the Malta board, the [0x0000.0000-0x2000.0000]
range is decoded by the GT64120, so move the "empty_slot" there.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221209151533.69516-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/Kconfig: Introduce CONFIG_GT64120 to select gt64xxx_pci.c

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221209151533.69516-2-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE MemoryRegionOps

GT64120's PCI endianness swapping works on little-endian hosts,
but doesn't on big-endian ones. Instead of complicating how
CFGADDR/CFGDATA registers deal with endianness, use the existing
MemoryRegionOps from hw/pci/pci_host.c. Doing so also reduce the
access to internal PCI_HOST_BRIDGE fields.

Map the PCI_HOST_BRIDGE MemoryRegionOps into the corresponding
CFGADDR/CFGDATA regions in the ISD MMIO and remove the unused
code in the current ISD read/write handlers.

Update the mapping when PCI0_CMD register is accessed (in case
the endianness is changed).

This allows using the GT64120 on a big-endian host (and boot
the MIPS Malta machine in little-endian).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-6-philmd@linaro.org>

hw/mips/gt64xxx_pci: Accumulate address space changes

Single registers access in ISD can produce multiple changes
in the address spaces. To reduce computational effort,
accumulate these as a single memory transaction.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-5-philmd@linaro.org>

hw/mips/malta: Trace FPGA LEDs/ASCII display updates

The FPGA LEDs/ASCII display is mostly used by the bootloader
to show very low-level debug info. QEMU connects its output
to a character device backend, which is not very practical
to correlate with ASM instruction executed, interrupts or
MMIO accesses. Also, the display discard the previous states.

To ease bootloader debugging experience, add a pair of trace
events. Such events can be analyzed over time or diff-ed
between different runs.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-4-philmd@linaro.org>

hw/mips/malta: Split FPGA LEDs/ASCII display updates

No need to refresh the ASCII bar when a LED is toggled
(and vice versa).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-3-philmd@linaro.org>

hw/timer/xilinx_timer: Use XpsTimerState instead of 'struct timerblock'

This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER()
macro call, to avoid after a QOM refactor:

  hw/timer/xilinx_timer.c:65:1: error: declaration of anonymous struct must be a definition
  DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER,
                           ^

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20230109140306.23161-15-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/xilinx_intc: Use 'XpsIntc' typedef instead of 'struct xlx_pic'

This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER()
macro call, to avoid after a QOM refactor:

  hw/intc/xilinx_intc.c:45:1: error: declaration of anonymous struct must be a definition
  DECLARE_INSTANCE_CHECKER(struct xlx_pic, XILINX_INTC,
                           ^

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20230109140306.23161-14-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc/sbsa_ec: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()

This model was merged few days before the QOM cleanup from
commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible")
was pulled and merged. Manually adapt.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-13-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc/sbsa_ec: Rename TYPE_SBSA_EC -> TYPE_SBSA_SECURE_EC

The structure is named SECUREECState. Rename the type accordingly.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-12-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE()

NPCM7XX models have been commited after the conversion from
commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible").
Manually convert them.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/bcm2836: Remove definitions generated by OBJECT_DECLARE_TYPE()

The typedef and definitions are generated by the OBJECT_DECLARE_TYPE
macro in "hw/arm/bcm2836.h":

 20    #define TYPE_BCM283X "bcm283x"
 21    OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X)

The script ran in commit a489d1951c ("Use OBJECT_DECLARE_TYPE when
possible") missed them because they are declared in a different
file unit. Remove them.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/stellaris: Use CamelCase for STELLARIS_ADC type name

Following docs/devel/style.rst guidelines, rename
stellaris_adc_state -> StellarisADCState. This also remove a
use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/stellaris: Drop useless casts from void * to pointer

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/omap_intc: Use CamelCase for TYPE_OMAP_INTC type name

Following docs/devel/style.rst guidelines, rename
omap_intr_handler_s -> OMAPIntcState. This also remove a
use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP2_GPIO type name

Following docs/devel/style.rst guidelines, rename omap2_gpif_s ->
Omap2GpioState. This also remove a use of 'struct' in the
DECLARE_INSTANCE_CHECKER() macro call.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP1_GPIO type name

Following docs/devel/style.rst guidelines, rename omap_gpif_s ->
Omap1GpioState. This also remove a use of 'struct' in the
DECLARE_INSTANCE_CHECKER() macro call.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/omap: Drop useless casts from void * to pointer

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/gpio/omap_gpio: Add local variable to avoid embedded cast

Add a local 'struct omap_gpif_s *' variable to improve readability.
(This also eases next commit conversion).

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/pxa: Avoid forward-declaring PXA2xxI2CState

To avoid forward-declaring PXA2xxI2CState, declare
PXA2XX_I2C before its use in pxa2xx_i2c_init() prototype.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: Remove unreachable code calling pflash_cfi01_register()

Since its QOM'ification in commit 368a354f02 ("pflash_cfi0x:
QOMified") the pflash_cfi01_register() function does not fail.

This call was later converted with a script to use &error_fatal,
still unable to fail. Remove the unreachable code.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-14-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/vexpress: Remove dead code in vexpress_common_init()

Upon introduction in commit b8433303fb ("Set proper device-width
for vexpress flash"), ve_pflash_cfi01_register() was calling
qdev_init_nofail() which can not fail. This call was later
converted with a script to use &error_fatal, still unable to
fail. Remove the unreachable code.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-13-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/z2: Use the IEC binary prefix definitions

IEC binary prefixes ease code review: the unit is explicit.

Add the FLASH_SECTOR_SIZE definition.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-12-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/omap_sx1: Use the IEC binary prefix definitions

IEC binary prefixes ease code review: the unit is explicit.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/omap_sx1: Remove unused 'total_ram' definitions

The total_ram_v1/total_ram_v2 definitions were never used.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/musicpal: Use the IEC binary prefix definitions

IEC binary prefixes ease code review: the unit is explicit.

Add the FLASH_SECTOR_SIZE definition.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/mainstone: Use the IEC binary prefix definitions

IEC binary prefixes ease code review: the unit is explicit.

Add the FLASH_SECTOR_SIZE definition.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/gumstix: Use the IEC binary prefix definitions

IEC binary prefixes ease code review: the unit is explicit.

Add definitions for RAM / Flash / Flash blocksize.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-7-philmd@linaro.org
Message-Id: <20200223231044.8003-3-philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/gumstix: Improve documentation

Add a comment describing the Connex uses a Numonyx RC28F128J3F75
flash, and the Verdex uses a Micron RC28F256P30TFA.

Correct the Verdex machine description (we model the 'Pro' board).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-6-philmd@linaro.org
Message-Id: <20200223231044.8003-3-philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/collie: Simplify flash creation using for() loop

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/collie: Use the IEC binary prefix definitions

IEC binary prefixes ease code review: the unit is explicit.

Add definitions for RAM / Flash / Flash blocksize.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/pxa2xx: Simplify pxa270_init()

Since pxa270_init() must map the device in the system memory,
there is no point in passing get_system_memory() by argument.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/pxa2xx: Simplify pxa255_init()

Since pxa255_init() must map the device in the system memory,
there is no point in passing get_system_memory() by argument.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109115316.2235-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fix sve_probe_page

Don't dereference CPUTLBEntryFull until we verify that
the page is valid.  Move the other user-only info field
updates after the valid check to match.

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1412
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230104190056.305143-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/avocado: Add SD boot test to Cubieboard

Cubieboard now can boot directly from SD card, without the need to pass
`-kernel` parameter. Update Avocado tests to cover this functionality.

Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20221226220303.14420-8-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm: Allwinner A10 enable SPL load from MMC

This patch enables copying of SPL from MMC if `-kernel` parameter is not
passed when starting QEMU. SPL is copied to SRAM_A.

The approach is reused from Allwinner H3 implementation.

Tested with Armbian and custom Yocto image.

Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20221226220303.14420-7-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>