OSDN Git Service
Austin Zheng [Wed, 24 May 2023 15:52:12 +0000 (11:52 -0400)]
drm/amd/display: Filter out AC mode frequencies on DC mode systems
Why:
Limit maximum clock speeds to DC mode limits for DC mode systems
How:
Store DC mode limits when individual clocks are initialized and
cap the values when building the clock table
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sridevi [Wed, 10 May 2023 18:34:55 +0000 (14:34 -0400)]
drm/amd/display: DSC Programming Deltas
[Why]
Programming register delta for DSC sub-block
[How]
Change DSC, resource files for programming register delta.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Sridevi <sarvinde@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Ma [Thu, 18 May 2023 18:07:13 +0000 (14:07 -0400)]
Revert "drm/amd/display: cache trace buffer size"
Revert commit
257e9891db0b ("drm/amd/display: cache trace buffer size")
to fix regression found in tests.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Thu, 8 Jun 2023 14:07:11 +0000 (22:07 +0800)]
drm/amd/pm: workaround for compute workload type on some skus
On smu 13.0.0, the compute workload type cannot be set on all the skus
due to some other problems. This workaround is to make sure compute workload type
can also run on some specific skus.
v2: keep the variable consistent
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Sat, 20 May 2023 00:43:30 +0000 (20:43 -0400)]
drm/amd/display: add NULL pointer check
[why]
check dmub_Srv exist or not before accessing dmub.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
shikaguo [Fri, 9 Jun 2023 03:32:09 +0000 (11:32 +0800)]
drm/amd/pm: enable more Pstates profile levels for yellow_carp
This patch enables following UMD stable Pstates profile levels for
power_dpm_force_performance_level interface.
- profile_peak
- profile_min_mclk
- profile_min_sclk
- profile_standard
Signed-off-by: shikaguo <shikai.guo@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chong Li [Wed, 7 Jun 2023 07:56:12 +0000 (15:56 +0800)]
drm/amdgpu: add option params to enforce process isolation between graphics and compute
enforce process isolation between graphics and compute via using the same reserved vmid.
v2: remove params "struct amdgpu_vm *vm" from
amdgpu_vmid_alloc_reserved and amdgpu_vmid_free_reserved.
Signed-off-by: Chong Li <chongli2@amd.com>
Reviewed-by: Christian Koenig <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nathan Chancellor [Thu, 8 Jun 2023 17:01:57 +0000 (10:01 -0700)]
drm/amdgpu: Wrap -Wunused-but-set-variable in cc-option
-Wunused-but-set-variable was only supported in clang starting with
13.0.0, so earlier versions will emit a warning, which is turned into a
hard error for the kernel to mirror GCC:
error: unknown warning option '-Wunused-but-set-variable'; did you mean '-Wunused-const-variable'? [-Werror,-Wunknown-warning-option]
The minimum supported version of clang for building the kernel is
11.0.0, so match the rest of the kernel and wrap
-Wunused-but-set-variable in a cc-option call, so that it is only used
when supported by the compiler.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1869
Fixes:
1b320ad3f5a8 ("drm/amd/amdgpu: introduce DRM_AMDGPU_WERROR")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shiwu Zhang [Tue, 23 May 2023 04:02:32 +0000 (12:02 +0800)]
drm/amdgpu: add the accelerator PCIe class
Add the accelerator PCIe class and match the
class in amdgpu for 0x1002 devices of that class.
From PCI spec:
"PCI Code and ID Assignment, r1.9, sec 1, 1.19"
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Wed, 22 Mar 2023 18:29:26 +0000 (14:29 -0400)]
Revert "Revert drm/amd/display: Enable Freesync Video Mode by default"
This reverts commit
4243c84aa082d8fba70c45f48eb2bb5c19799060.
Enables freesync video by default, since the hang and corruption issue
on eDP panels are now fixed.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <rjordrigo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Tue, 23 May 2023 15:57:27 +0000 (11:57 -0400)]
drm/amdkfd: fix and enable debugging for gfx11
There are a couple of fixes required to enable gfx11 debugging.
First, ADD_QUEUE.trap_en is an inappropriate place to toggle
a per-process register so move it to SET_SHADER_DEBUGGER.trap_en.
When ADD_QUEUE.skip_process_ctx_clear is set, MES will prioritize
the SET_SHADER_DEBUGGER.trap_en setting.
Second, to preserve correct save/restore priviledged wave states
in coordination with the trap enablement setting, resume suspended
waves early in the disable call.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Wed, 7 Jun 2023 06:45:20 +0000 (01:45 -0500)]
drm/amd: Tighten permissions on VBIOS flashing attributes
Non-root users shouldn't be able to try to trigger a VBIOS flash
or query the flashing status. This should be reserved for users with the
appropriate permissions.
Cc: stable@vger.kernel.org
Fixes:
8424f2ccb3c0 ("drm/amdgpu/psp: Add vbflash sysfs interface support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Wed, 7 Jun 2023 06:41:22 +0000 (01:41 -0500)]
drm/amd: Make sure image is written to trigger VBIOS image update flow
The VBIOS image update flow requires userspace to:
1) Write the image to `psp_vbflash`
2) Read `psp_vbflash`
3) Poll `psp_vbflash_status` to check for completion
If userspace reads `psp_vbflash` before writing an image, it's
possible that it causes problems that can put the dGPU into an invalid
state.
Explicitly check that an image has been written before letting a read
succeed.
Cc: stable@vger.kernel.org
Fixes:
8424f2ccb3c0 ("drm/amdgpu/psp: Add vbflash sysfs interface support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Mon, 5 Jun 2023 08:57:45 +0000 (16:57 +0800)]
drm/amd/pm: enable more Pstates profile levels for SMU v13.0.4
This patch enables following UMD stable Pstates profile
levels for power_dpm_force_performance_level interface.
- profile_peak
- profile_min_mclk
- profile_min_sclk
- profile_standard
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Fri, 2 Jun 2023 08:57:12 +0000 (16:57 +0800)]
drm/amd/pm: enable vclk and dclk Pstates for SMU v13.0.4
Add the ability to control the vclk and dclk frequency by
power_dpm_force_performance_level interface.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Wed, 7 Jun 2023 03:24:48 +0000 (11:24 +0800)]
drm/amd/pm: fix vclk setting failed for SMU v13.0.4
PMFW use the left-shifted 16 bits argument to set the VCLK
DPM frequency for SMU v13.0.4.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Tue, 6 Jun 2023 06:42:39 +0000 (14:42 +0800)]
drm/amdgpu: skip to resume rlcg for gc 9.4.3 in vf side
skip to resume rlcg, because rlcg is already enabled in pf side.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Mon, 5 Jun 2023 03:39:30 +0000 (11:39 +0800)]
drm/amdgpu: disable virtual display support on APP device
virtual display is not support on APP device.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Gavin Wan <gavin.wan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lang Yu [Sat, 6 May 2023 04:01:33 +0000 (12:01 +0800)]
drm/amdgpu: unmap and remove csa_va properly
Root PD BO should be reserved before unmap and remove
a bo_va from VM otherwise lockdep will complain.
v2: check fpriv->csa_va is not NULL instead of amdgpu_mcbp (christian)
[14616.936827] WARNING: CPU: 6 PID: 1711 at drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1762 amdgpu_vm_bo_del+0x399/0x3f0 [amdgpu]
[14616.937096] Call Trace:
[14616.937097] <TASK>
[14616.937102] amdgpu_driver_postclose_kms+0x249/0x2f0 [amdgpu]
[14616.937187] drm_file_free+0x1d6/0x300 [drm]
[14616.937207] drm_close_helper.isra.0+0x62/0x70 [drm]
[14616.937220] drm_release+0x5e/0x100 [drm]
[14616.937234] __fput+0x9f/0x280
[14616.937239] ____fput+0xe/0x20
[14616.937241] task_work_run+0x61/0x90
[14616.937246] exit_to_user_mode_prepare+0x215/0x220
[14616.937251] syscall_exit_to_user_mode+0x2a/0x60
[14616.937254] do_syscall_64+0x48/0x90
[14616.937257] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joshua Ashton [Tue, 10 Jan 2023 19:14:06 +0000 (19:14 +0000)]
drm/amd/display: Refactor avi_info_frame colorimetry determination
Replace the messy two if-else chains here that were
on the same value with a switch on the enum.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 29 Nov 2022 22:24:52 +0000 (17:24 -0500)]
drm/amd/display: Add debugfs for testing output colorspace
In order to IGT test colorspace we'll want to print
the currently enabled colorspace on a stream. We add
a new debugfs to do so, using the same scheme as
current bpc reporting.
This might also come in handy when debugging display
issues.
v4:
- Fix function doc comment
- Fix sRGB debug print
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joshua Ashton [Mon, 14 Nov 2022 19:52:30 +0000 (19:52 +0000)]
drm/amd/display: Always set crtcinfo from create_stream_for_sink
Given that we always pass dm_state into here now, this won't ever
trigger anymore.
This is needed for we will always fail mode validation with invalid
clocks or link bandwidth errors.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 29 Mar 2022 19:30:05 +0000 (15:30 -0400)]
drm/amd/display: Send correct DP colorspace infopacket
Look at connector->colorimetry to determine output colorspace.
We don't want to impact current SDR behavior, so
DRM_MODE_COLORIMETRY_DEFAULT preserves current behavior.
Also add support to explicitly set BT601 and BT709.
v4:
- Roll support for BT709 and BT601 into this patch
- Add default case to avoid warnings for unhandled
enum values
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 29 Mar 2022 15:26:23 +0000 (11:26 -0400)]
drm/amd/display: Signal mode_changed if colorspace changed
We need to signal mode_changed to make sure we update the output
colorspace.
v2: No need to call drm_hdmi_avi_infoframe_colorimetry as DC does its
own infoframe packing.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 25 Mar 2022 19:30:28 +0000 (15:30 -0400)]
drm/amd/display: Register Colorspace property for DP and HDMI
We want compositors to be able to set the output
colorspace on DP and HDMI outputs, based on the
caps reported from the receiver via EDID.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 1 Apr 2022 17:45:29 +0000 (13:45 -0400)]
drm/amd/display: Always pass connector_state to stream validation
We need the connector_state for colorspace and scaling information
and can get it from connector->state.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 29 Nov 2022 20:16:31 +0000 (15:16 -0500)]
drm/connector: Allow drivers to pass list of supported colorspaces
Drivers might not support all colorspaces defined in
dp_colorspaces and hdmi_colorspaces. This results in
undefined behavior when userspace is setting an
unsupported colorspace.
Allow drivers to pass the list of supported colorspaces
when creating the colorspace property.
v2:
- Use 0 to indicate support for all colorspaces (Jani)
- Print drm_dbg_kms message when drivers pass 0
to signal that drivers should specify supported
colorspaecs explicity (Jani)
v3:
- Move changes to create a common colorspace_names array
to separate patch
v6:
- Avoid magic when passing 0 for supported_colorspaces;
be explicit in treating it as "all DP/HDMI"
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 30 Nov 2022 21:11:30 +0000 (16:11 -0500)]
drm/connector: Print connector colorspace in state debugfs
v3: Fix kerneldocs (kernel test robot)
v4: Avoid returning NULL from drm_get_colorspace_name
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 29 Nov 2022 20:16:31 +0000 (15:16 -0500)]
drm/connector: Use common colorspace_names array
We an use bitfields to track the support ones for HDMI
and DP. This allows us to print colorspaces in a consistent
manner without needing to know whether we're dealing with
DP or HDMI.
v4:
- Rename _MAX to _COUNT and leave comment to indicate
it's not a valid value
- Fix misplaced function doc
v6:
- Drop magic in drm_mode_create_colorspace_property for
dealing with "0" supported_colorspaces. Expect the caller
to always provide a non-zero supported_colorspaces.
- Improve error checking and logging
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 30 Nov 2022 19:42:03 +0000 (14:42 -0500)]
drm/connector: Pull out common create_colorspace_property code
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joshua Ashton [Fri, 3 Feb 2023 02:07:43 +0000 (02:07 +0000)]
drm/connector: Add enum documentation to drm_colorspace
To match the other enums, and add more information about these values.
v2:
- Specify where an enum entry comes from
- Clarify DEFAULT and NO_DATA behavior
- BT.2020 CYCC is "constant luminance"
- correct type for BT.601
v4:
- drop DP/HDMI clarifications that might create
more questions than answers
v5:
- Add note on YCC and RGB variants
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 3 Feb 2023 02:07:42 +0000 (02:07 +0000)]
drm/connector: Convert DRM_MODE_COLORIMETRY to enum
This allows us to use strongly typed arguments.
v2:
- Bring NO_DATA back
- Provide explicit enum values
v3:
- Drop unnecessary '&' from kerneldoc (emersion)
v4:
- Fix Normal Colorimetry comment
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mukul Joshi [Wed, 31 May 2023 15:22:03 +0000 (11:22 -0400)]
drm/amdkfd: Fix reserved SDMA queues handling
This patch fixes a regression caused by a bad merge where
the handling of reserved SDMA queues was accidentally removed.
With the fix, the reserved SDMA queues are again correctly
marked as unavailable for allocation.
Fixes:
a805889a1531 ("drm/amdkfd: Update SDMA queue management for GFX9.4.3")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 6 Jun 2023 15:14:04 +0000 (11:14 -0400)]
drm/amdgpu: add missing radeon secondary PCI ID
0x5b70 is a missing RV370 secondary id. Add it so
we don't try and probe it with amdgpu.
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Fri, 2 Jun 2023 12:18:06 +0000 (07:18 -0500)]
drm/amd: Check that a system is a NUMA system before looking for SRAT
It's pointless on laptops to look for the SRAT table as these are not
NUMA. Check the number of possible nodes is > 1 to decide whether to
look for SRAT.
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Wed, 7 Jun 2023 07:56:27 +0000 (03:56 -0400)]
drm/amdkfd: fix vmfault signalling with additional data.
Exception handling for vmfaults should be raised with additional data.
Reported-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Thu, 1 Jun 2023 12:56:42 +0000 (20:56 +0800)]
drm/amdgpu: Set EEPROM ras info
Set EEPROM ras info: rma status, health percent and bad
page threshold.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Mon, 29 May 2023 02:17:59 +0000 (10:17 +0800)]
drm/amdgpu: Calculate EEPROM table ras info bytes sum
It's more reasonable to check EEPROM table ras info bytes.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Wed, 31 May 2023 02:37:09 +0000 (10:37 +0800)]
drm/amdgpu: Add support EEPROM table v2.1
Add ras info to EEPROM table, app can analyse device ECC
status without GPU driver through EEPROM table ras info.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Tue, 30 May 2023 14:48:34 +0000 (22:48 +0800)]
drm/amdgpu: Support setting EEPROM table version
Add setting EEPROM table version interface for umcv8.10,
Add EEPROM table v2.1 to UMC v8.10.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Tue, 30 May 2023 14:38:17 +0000 (22:38 +0800)]
drm/amdgpu: Add RAS table v2.1 macro definition
Add RAS EEPROM table version 2.1 macro definition.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Tue, 30 May 2023 13:48:17 +0000 (21:48 +0800)]
drm/amdgpu: Rename ras table version
Rename RAS_TABLE_VER to RAS_TABLE_VER_V1,
move RAS_TABLE_VER_V1 from amdgpu_ras_eeprom.c to amdgpu_ras_eeprom.h.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiadong Zhu [Thu, 25 May 2023 10:42:15 +0000 (18:42 +0800)]
drm/amdgpu: Implement gfx9 patch functions for resubmission
Patch the packages including CONTEXT_CONTROL and WRITE_DATA for gfx9
during the resubmission scenario.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiadong Zhu [Thu, 25 May 2023 08:52:55 +0000 (16:52 +0800)]
drm/amdgpu: Modify indirect buffer packages for resubmission
When the preempted IB frame resubmitted to cp, we need to modify the frame
data including:
1. set PRE_RESUME 1 in CONTEXT_CONTROL.
2. use meta data(DE and CE) read from CSA in WRITE_DATA.
Add functions to save the location the first time IBs emitted and callback
to patch the package when resubmission happens.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Tue, 6 Jun 2023 06:27:04 +0000 (14:27 +0800)]
drm/amdgpu/mmsch: Correct the definition for mmsch init header
For the header, it is version related, shouldn't use MAX_VCN_INSTANCES.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Tue, 6 Jun 2023 23:29:51 +0000 (19:29 -0400)]
drm/amdkfd: potential error pointer dereference in ioctl
The "target" either comes from kfd_create_process() which returns error
pointers on error or kfd_lookup_process_by_pid() which returns NULL on
error. So we need to check for both types of errors.
Fixes:
0ab2d7532b05 ("drm/amdkfd: prepare per-process debug enable and disable")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Tue, 6 Jun 2023 15:42:53 +0000 (11:42 -0400)]
drm/amd/display: Only use ODM2:1 policy for high pixel rate displays
We only gain a benefit of using the ODM2:1 dynamic policy if it allow us
to decrease DISPCLK to use the VMIN freq. If the display config can
already achieve VMIN DISPCLK freq without ODM2:1, don't apply the
policy.
This patch was reverted but that causes some IGT regressions. To
unblock, the patch is being applied again until IGT failures are
fixed.
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Dan Carpenter [Tue, 6 Jun 2023 08:33:46 +0000 (11:33 +0300)]
drm/amd/pm: Fix memory some memory corruption
The "od_table" is a pointer to a large struct, but this code is doing
pointer math as if it were pointing to bytes. It results in writing
far outside the struct.
Fixes:
2e8452ea4ef6 ("drm/amd/pm: fulfill the OD support for SMU13.0.0")
Fixes:
2a9aa52e4617 ("drm/amd/pm: fulfill the OD support for SMU13.0.7")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sui Jingfeng [Tue, 6 Jun 2023 13:33:28 +0000 (21:33 +0800)]
drm/amdgpu: display/Kconfig: replace leading spaces with tab
This patch replace the leading spaces with tab, make them keep aligned with
the rest of the config options. No functional change.
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Mon, 5 Jun 2023 18:18:49 +0000 (14:18 -0400)]
drm/amd/display: mark dml314's UseMinimumDCFCLK() as noinline_for_stack
clang reports:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:3892:6: error: stack frame size (2632) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3892 | void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
So, since UseMinimumDCFCLK() consumes a lot of stack space, mark it as
noinline_for_stack to prevent it from blowing up
dml314_ModeSupportAndSystemConfigurationFull()'s stack size.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hamza Mahfooz [Mon, 5 Jun 2023 17:59:08 +0000 (13:59 -0400)]
drm/amd/display: mark dml31's UseMinimumDCFCLK() as noinline_for_stack
clang reports:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3797:6: error: stack frame size (2632) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3797 | void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
So, since UseMinimumDCFCLK() consumes a lot of stack space, mark it as
noinline_for_stack to prevent it from blowing up
dml31_ModeSupportAndSystemConfigurationFull()'s stack size.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Tue, 6 Jun 2023 12:06:45 +0000 (17:36 +0530)]
drm/amd/display: Fix unused variable ‘should_lock_all_pipes’
Fix below compilation error:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3524:7: error: unused variable 'should_lock_all_pipes' [-Werror,-Wunused-variable]
bool should_lock_all_pipes = (update_type != UPDATE_TYPE_FAST);
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 19 May 2023 15:38:15 +0000 (11:38 -0400)]
drm/amd/display: Reduce sdp bw after urgent to 90%
[Description]
Reduce expected SDP bandwidth due to poor QoS and
arbitration issues on high bandwidth configs
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Max Tseng [Tue, 25 Apr 2023 07:05:17 +0000 (15:05 +0800)]
drm/amd/display: Add control flag to dc_stream_state to skip eDP BL off/link off
Add control flag to dc_stream_state to skip eDP BL off/link off.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Max Tseng <max.tseng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Saaem Rizvi [Thu, 18 May 2023 16:12:20 +0000 (12:12 -0400)]
drm/amd/display: Wrong index type for pipe iterator
[Why and How]
Type mismatch in index and pipe count might cause an infinite loop. code
Change should resolve this issue.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 18 May 2023 15:30:44 +0000 (11:30 -0400)]
drm/amd/display: Refactor fast update to use new HWSS build sequence
[Description]
- Refactor HW sequencer to use a build / execute sequence
- Also move gamma updates to become fast
v2: squash in build fix ("drm/amd/display: Fix guarding of 'if (dc->debug.visual_confirm)'")
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Tue, 16 May 2023 19:50:40 +0000 (15:50 -0400)]
drm/amd/display: fix dcn315 single stream crb allocation
Change to improve avoiding asymetric crb calculations for single stream
scenarios.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YiPeng Chai [Wed, 24 May 2023 09:14:15 +0000 (17:14 +0800)]
drm/amdgpu: change reserved vram info print
The link object of mgr->reserved_pages is the blocks
variable in struct amdgpu_vram_reservation, not the
link variable in struct drm_buddy_block.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Chia-I Wu [Thu, 1 Jun 2023 21:48:08 +0000 (14:48 -0700)]
drm/amdgpu: fix xclk freq on CHIP_STONEY
According to Alex, most APUs from that time seem to have the same issue
(vbios says 48Mhz, actual is 100Mhz). I only have a CHIP_STONEY so I
limit the fixup to CHIP_STONEY
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Min Li [Sat, 3 Jun 2023 07:43:45 +0000 (15:43 +0800)]
drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 2 Jun 2023 18:37:13 +0000 (14:37 -0400)]
Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2"
This reverts commit
f03eb1d26c2739b75580f58bbab4ab2d5d3eba46.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 2 Jun 2023 18:34:12 +0000 (14:34 -0400)]
Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id"
This reverts commit
9d2d1827af295fd6971786672c41c4dba3657154.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 2 Jun 2023 18:32:55 +0000 (14:32 -0400)]
Revert "drm/amdgpu: change the reference clock for raven/raven2"
This reverts commit
fbc24293ca16b3b9ef891fe32ccd04735a6f8dc1.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Fri, 21 Apr 2023 12:58:39 +0000 (20:58 +0800)]
drm/amdgpu: convert vcn/jpeg logical mask to physical mask
Changed from V1:
Remove amdgpu_ras_logical_mask_to_physical_mask
due to GET_MASK provides same feature.
Support convert VCN/JPEG logical mask to physical
mask.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Fri, 21 Apr 2023 13:14:36 +0000 (21:14 +0800)]
drm/amdgpu: support check vcn jpeg block mask
Support VCN/JPEG instance mask checking, pass logical
mask directly except GFX/SDMA/VCN/JPEG blocks.
Changed from V1:
correct a typo
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Wed, 29 Mar 2023 14:03:09 +0000 (22:03 +0800)]
drm/amdgpu: pass xcc mask to ras ta
pass xcc mask to ras ta, ras ta will compare
the mask with the one from chiplet topology.
Changed from V1:
Remove IP version checking.
Set ras_cmd->ras_init_message.init_flags.xcc_mask
directly due to xcc_mask is common structres to
all the devices.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Mon, 5 Jun 2023 03:15:34 +0000 (11:15 +0800)]
drm/amd/pm: update smu-driver if header for smu 13.0.0 and smu 13.0.10
update smu-driver if header for smu 13.0.0 and smu 13.0.10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Le Ma [Wed, 31 May 2023 08:08:50 +0000 (16:08 +0800)]
drm/amdgpu/pm: notify driver unloading to PMFW for SMU v13.0.6 dGPU
Per requested, follow the same sequence as APU to send only
PPSMC_MSG_PrepareForDriverUnload to PMFW during driver unloading.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Fri, 2 Jun 2023 15:44:21 +0000 (21:14 +0530)]
drm/amdgpu: Mark 'kgd_gfx_aldebaran_clear_address_watch' & 'kgd_gfx_v11_clear_address_watch' functions as static
Below two functions cause a warning because they lack a prototype:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_aldebaran.c:164:10: warning: no previous prototype for ‘kgd_gfx_aldebaran_clear_address_watch’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c:782:10: warning: no previous prototype for ‘kgd_gfx_v11_clear_address_watch’ [-Wmissing-prototypes]
There are no callers from other files, so just mark them as 'static'.
Also fixes the following checks:
CHECK: Alignment should match open parenthesis +static uint32_t
kgd_gfx_aldebaran_clear_address_watch(struct amdgpu_device *adev,
uint32_t watch_id)
CHECK: Alignment should match open parenthesis +static uint32_t
kgd_gfx_v11_clear_address_watch(struct amdgpu_device *adev, uint32_t
watch_id)
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 1 Jun 2023 17:09:44 +0000 (13:09 -0400)]
drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+
For FPO/FAMS, DMCUB will try to change the output timings by writing to
the OTG registers. However, the timings written directly to the OTG
registers will not be honoured unless VMIN/VMAX selector registers are
programmed with the right bits and trigger source is selected correctly.
Proper solution needs to go into DMCUB but will require additional state
tracking to ensure that the selectors are set and reset correctly as per
driver state. Until fix is merged into firmware, apply the workaround in
driver to unconditionally write OTG vmin/vmax selectors.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Tue, 4 Apr 2023 16:53:54 +0000 (12:53 -0400)]
Revert "drm/amd/display: Only use ODM2:1 policy for high pixel rate displays"
This reverts commit
047783cdd5f604d87398236beb4971abb4d43293 since it
causes higher power consumption for single display use case (4k60).
Also, this patch introduced a 35% performance drop in a Vulkan benchmark.
* The patch disabled the ODM-combination on most popular monitors, including 4K, 2K and FHD monitors at 60Hz.
* ODM-combination can halve the DPP clock to save power, that is the reason why we introduce ODM-combination, and the PM log shows single pipe consumes more power at 4K@60Hz.
* ODM-combination has 2 de-tiled buffer involved, which provides longer self-sustained time, that benefit to the memory power optimization.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Fri, 2 Jun 2023 15:38:49 +0000 (21:08 +0530)]
drm/amd/display: Add gnu_printf format attribute for snprintf_count()
Fix the following W=1 kernel build warning:
display/dc/dcn10/dcn10_hw_sequencer_debug.c: In function ‘snprintf_count’:
display/dc/dcn10/dcn10_hw_sequencer_debug.c:56:2: warning: function ‘snprintf_count’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Use the __printf() attribute to let the compiler warn if
invalid format strings are passed in.
And fix the following checks:
CHECK: Avoid CamelCase: <pBuf> +unsigned int __printf(3, 4)
snprintf_count(char *pBuf, unsigned int bufSize, char *fmt, ...)
CHECK: Avoid CamelCase: <bufSize> +unsigned int __printf(3, 4)
snprintf_count(char *pBuf, unsigned int bufSize, char *fmt, ...)
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Fri, 2 Jun 2023 08:32:45 +0000 (14:02 +0530)]
drm/amd/display: Address kdoc warnings in dcn30_fpu.c
Fixes the following gcc with W=1:
display/dc/dml/dcn30/dcn30_fpu.c:677: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Finds dummy_latency_index when MCLK switching using firmware based
display/dc/dml/dcn30/dcn30_fpu.c:688: warning: Function parameter or member 'dc' not described in 'dcn30_find_dummy_latency_index_for_fw_based_mclk_switch'
display/dc/dml/dcn30/dcn30_fpu.c:688: warning: Function parameter or member 'context' not described in 'dcn30_find_dummy_latency_index_for_fw_based_mclk_switch'
display/dc/dml/dcn30/dcn30_fpu.c:688: warning: Function parameter or member 'pipes' not described in 'dcn30_find_dummy_latency_index_for_fw_based_mclk_switch'
display/dc/dml/dcn30/dcn30_fpu.c:688: warning: Function parameter or member 'pipe_cnt' not described in 'dcn30_find_dummy_latency_index_for_fw_based_mclk_switch'
display/dc/dml/dcn30/dcn30_fpu.c:688: warning: Function parameter or member 'vlevel' not described in 'dcn30_find_dummy_latency_index_for_fw_based_mclk_switch'
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GONG, Ruiqi [Fri, 2 Jun 2023 10:12:33 +0000 (18:12 +0800)]
drm/amd/display: fix compilation error due to shifting negative value
Currently compiling linux-next with allmodconfig triggers the following
error:
./drivers/gpu/drm/amd/amdgpu/../display/include/fixed31_32.h: In function ‘dc_fixpt_truncate’:
./drivers/gpu/drm/amd/amdgpu/../display/include/fixed31_32.h:528:22: error: left shift of negative value [-Werror=shift-negative-value]
528 | arg.value &= (~0LL) << (FIXED31_32_BITS_PER_FRACTIONAL_PART - frac_bits);
| ^~
Use `unsigned long long` instead.
Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gustavo A. R. Silva [Sun, 28 May 2023 20:26:37 +0000 (14:26 -0600)]
drm/amdgpu/discovery: Replace fake flex-arrays with flexible-array members
Zero-length and one-element arrays are deprecated, and we are moving
towards adopting C99 flexible-array members, instead.
Use the DECLARE_FLEX_ARRAY() helper macro to transform zero-length
arrays in a union into flexible-array members. And replace a one-element
array with a C99 flexible-array member.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1009:89: warning: array subscript kk is outside array bounds of ‘uint32_t[0]’ {aka ‘unsigned int[]’} [-Warray-bounds=]
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1007:94: warning: array subscript kk is outside array bounds of ‘uint64_t[0]’ {aka ‘long long unsigned int[]’} [-Warray-bounds=]
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1310:94: warning: array subscript k is outside array bounds of ‘uint64_t[0]’ {aka ‘long long unsigned int[]’} [-Warray-bounds=]
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1309:57: warning: array subscript k is outside array bounds of ‘uint32_t[0]’ {aka ‘unsigned int[]’} [-Warray-bounds=]
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/300
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chia-I Wu [Thu, 1 Jun 2023 22:44:12 +0000 (15:44 -0700)]
amdgpu: validate offset_in_bo of drm_amdgpu_gem_va
This is motivated by OOB access in amdgpu_vm_update_range when
offset_in_bo+map_size overflows.
v2: keep the validations in amdgpu_vm_bo_map
v3: add the validations to amdgpu_vm_bo_map/amdgpu_vm_bo_replace_map
rather than to amdgpu_gem_va_ioctl
Fixes:
9f7eb5367d00 ("drm/amdgpu: actually use the VM map parameters")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Fri, 2 Jun 2023 17:52:04 +0000 (13:52 -0400)]
drm/amdgpu: fix debug wait on idle for gfx9.4.1
Wait calls for amd_ip_block_type not amd_hw_ip_block_type.
Reported-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Tue, 18 Apr 2023 14:11:56 +0000 (10:11 -0400)]
drm/amd/display: fix seamless odm transitions
Add missing programming and function pointers
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Tue, 9 May 2023 20:40:19 +0000 (16:40 -0400)]
drm/amd/display: add ODM case when looking for first split pipe
[Why]
When going from ODM 2:1 single display case to max displays, second
odm pipe needs to be repurposed for one of the new single displays.
However, acquire_first_split_pipe() only handles MPC case and not
ODM case
[How]
Add ODM conditions in acquire_first_split_pipe()
Add commit_minimal_transition_state() in commit_streams() to handle
odm 2:1 exit first, and then process new streams
Handle ODM condition in commit_minimal_transition_state()
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiapeng Chong [Fri, 2 Jun 2023 06:17:53 +0000 (14:17 +0800)]
drm/amd/display: clean up some inconsistent indenting
No functional modification involved.
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:2377 link_set_dpms_on() warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5376
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Fri, 2 Jun 2023 09:49:22 +0000 (15:19 +0530)]
drm/amd/display: Fix dc/dcn20/dcn20_optc.c kdoc
Fix all kdoc warnings in dc/dcn20/dcn20_optc.c:
display/dc/dcn20/dcn20_optc.c:41: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Enable CRTC
display/dc/dcn20/dcn20_optc.c:76: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
*For the below, I'm not sure how your GSL parameters are stored in your
env,
display/dc/dcn20/dcn20_optc.c:85: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* There are (MAX_OPTC+1)/2 gsl groups available for use.
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 9 May 2023 02:21:52 +0000 (10:21 +0800)]
drm/amd/pm: fulfill the OD support for SMU13.0.7
Fulfill the interfaces for OD settings retrieving and setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Thu, 1 Jun 2023 12:23:45 +0000 (17:53 +0530)]
drm/amd/pm: Fill metrics data for SMUv13.0.6
Populate metrics data table for SMU v13.0.6. Add PCIe link speed/width
information also.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 8 May 2023 08:57:02 +0000 (16:57 +0800)]
drm/amd/pm: fulfill the OD support for SMU13.0.0
Fulfill the interfaces for OD settings retrieving and setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 11 Apr 2023 03:49:09 +0000 (11:49 +0800)]
drm/amd/pm: fulfill SMU13 OD settings init and restore
Gfxclk fmin/fmax, Uclk fmin/fmax and Gfx v/f curve voltage offset
OD settings are supported for SMU13.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Tue, 10 May 2022 16:51:26 +0000 (12:51 -0400)]
drm/amdkfd: bump kfd ioctl minor version for debug api availability
Bump the minor version to declare debugging capability is now
available.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Tue, 10 May 2022 16:47:45 +0000 (12:47 -0400)]
drm/amdkfd: add debug device snapshot operation
Similar to queue snapshot, return an array of device information using
an entry_size check and return.
Unlike queue snapshots, the debugger needs to pass to correct number of
devices that exist. If it fails to do so, the KFD will return the
number of actual devices so that the debugger can make a subsequent
successful call.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Tue, 10 May 2022 15:15:29 +0000 (11:15 -0400)]
drm/amdkfd: add debug queue snapshot operation
Allow the debugger to get a snapshot of a specified number of queues
containing various queue property information that is copied to the
debugger.
Since the debugger doesn't know how many queues exist at any given time,
allow the debugger to pass the requested number of snapshots as 0 to get
the actual number of potential snapshots to use for a subsequent snapshot
request for actual information.
To prevent future ABI breakage, pass in the requested entry_size.
The KFD will return it's own entry_size in case the debugger still wants
log the information in a core dump on sizing failure.
Also allow the debugger to clear exceptions when doing a snapshot.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Mon, 9 May 2022 17:37:36 +0000 (13:37 -0400)]
drm/amdkfd: add debug query exception info operation
Allow the debugger to query additional info based on an exception code.
For device exceptions, it's currently only memory violation information.
For process exceptions, it's currently only runtime information.
Queue exception only report the queue exception status.
The debugger has the option of clearing the target exception on query.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Mon, 9 May 2022 15:10:32 +0000 (11:10 -0400)]
drm/amdkfd: add debug query event operation
Allow the debugger to query a single queue, device and process
exception.
The KFD should also return the GPU or Queue id of the exception.
The debugger also has the option of clearing exceptions after
being queried.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Mon, 9 May 2022 14:51:56 +0000 (10:51 -0400)]
drm/amdkfd: add debug set flags operation
Allow the debugger to set single memory and single ALU operations.
Some exceptions are imprecise (memory violations, address watch) in the
sense that a trap occurs only when the exception interrupt occurs and
not at the non-halting faulty instruction. Trap temporaries 0 & 1 save
the program counter address, which means that these values will not point
to the faulty instruction address but to whenever the interrupt was
raised.
Setting the Single Memory Operations flag will inject an automatic wait
on every memory operation instruction forcing imprecise memory exceptions
to become precise at the cost of performance. This setting is not
permitted on debug devices that support only a global setting of this
option.
Return the previous set flags to the debugger as well.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Fri, 6 May 2022 18:58:55 +0000 (14:58 -0400)]
drm/amdkfd: add debug set and clear address watch points operation
Shader read, write and atomic memory operations can be alerted to the
debugger as an address watch exception.
Allow the debugger to pass in a watch point to a particular memory
address per device.
Note that there exists only 4 watch points per devices to date, so have
the KFD keep track of what watch points are allocated or not.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Thu, 5 May 2022 20:15:37 +0000 (16:15 -0400)]
drm/amdkfd: add debug suspend and resume process queues operation
In order to inspect waves from the saved context at any point during a
debug session, the debugger must be able to preempt queues to trigger
context save by suspending them.
On queue suspend, the KFD will copy the context save header information
so that the debugger can correctly crawl the appropriate size of the saved
context. The debugger must then also be allowed to resume suspended queues.
A queue that is newly created cannot be suspended because queue ids are
recycled after destruction so the debugger needs to know that this has
occurred. Query functions will be later added that will clear a given
queue of its new queue status.
A queue cannot be destroyed while it is suspended to preserve its saved
context during debugger inspection. Have queue destruction block while
a queue is suspended and unblocked when it is resumed. Likewise, if a
queue is about to be destroyed, it cannot be suspended.
Return the number of queues successfully suspended or resumed along with
a per queue status array where the upper bits per queue status show that
the request was invalid (new/destroyed queue suspend request, missing
queue) or an error occurred (HWS in a fatal state so it can't suspend or
resume queues).
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Mon, 2 May 2022 15:45:05 +0000 (11:45 -0400)]
drm/amdkfd: add debug wave launch mode operation
Allow the debugger to set wave behaviour on to either normally operate,
halt at launch, trap on every instruction, terminate immediately or
stall on allocation.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Wed, 27 Apr 2022 17:18:10 +0000 (13:18 -0400)]
drm/amdkfd: add debug wave launch override operation
This operation allows the debugger to override the enabled HW
exceptions on the device.
On debug devices that only support the debugging of a single process,
the HW exceptions are global and set through the SPI_GDBG_TRAP_MASK
register.
Because they are global, only address watch exceptions are allowed to
be enabled. In other words, the debugger must preserve all non-address
watch exception states in normal mode operation by barring a full
replacement override or a non-address watch override request.
For multi-process debugging, all HW exception overrides are per-VMID so
all exceptions can be overridden or fully replaced.
In order for the debugger to know what is permissible, returned the
supported override mask back to the debugger along with the previously
enable overrides.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Wed, 27 Apr 2022 14:24:37 +0000 (10:24 -0400)]
drm/amdkfd: add debug set exceptions enabled operation
The debugger subscibes to nofication for requested exceptions on attach.
Allow the debugger to change its subsciption later on.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Fri, 22 Apr 2022 16:26:18 +0000 (12:26 -0400)]
drm/amdkfd: update process interrupt handling for debug events
The debugger must be notified by any debugger subscribed exception
that comes from hardware interrupts.
If a debugger session exits, any exceptions it subscribed to may still
have interrupts in the interrupt ring buffer or KGD/KFD pipeline.
To prevent a new session from inheriting stale interrupts, when a new
queue is created, open an interrupt drain and allow the IH ring to drain
from a timestamped checkpoint. Then inject a custom IV so that once
the custom IV is picked up by the KFD, it's safe to close the drain
and proceed with queue creation.
The drain must also be on debug disable as SW interrupts may still
be processed. Drain at this time and clear all the exception status.
The debugger may also not be attached nor subscibed to certain
exceptions so forward them directly to the runtime.
GFX10 also requires its own IV processing, hence the creation of
kfd_int_process_v10.c. This is because the IV from SQ interrupts are
packed into a new continguous format unlike GFX9. To make this clear,
a separate interrupting handling code file was created.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 11 Apr 2023 03:25:52 +0000 (11:25 +0800)]
drm/amd/pm: update SMU13 header files for coming OD support
Correct the data structures for OD feature support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall [Tue, 2 Mar 2021 00:34:39 +0000 (18:34 -0600)]
drm/amdkfd: add debug trap enabled flag to tma
Trap handler behavior will differ when a debugger is attached.
Make the debug trap flag available in the trap handler TMA.
Update it when the debug trap ioctl is invoked.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Fri, 8 Apr 2022 17:12:24 +0000 (13:12 -0400)]
drm/amdkfd: add runtime enable operation
The debugger can attach to a process prior to HSA enablement (i.e.
inferior is spawned by the debugger and attached to immediately before
target process has been enabled for HSA dispatches) or it
can attach to a running target that is already HSA enabled. Either
way, the debugger needs to know the enablement status to know when
it can inspect queues.
For the scenario where the debugger spawns the target process,
it will have to wait for ROCr's runtime enable request from the target.
The runtime enable request will be able to see that its process has been
debug attached. ROCr raises an EC_PROCESS_RUNTIME signal to the
debugger then blocks the target process while waiting the debugger's
response. Once the debugger has received the runtime signal, it will
unblock the target process.
For the scenario where the debugger attaches to a running target
process, ROCr will set the target process' runtime status as enabled so
that on an attach request, the debugger will be able to see this
status and will continue with debug enablement as normal.
A secondary requirement is to conditionally enable the trap tempories only
if the user requests it (env var HSA_ENABLE_DEBUG=1) or if the debugger
attaches with HSA runtime enabled. This is because setting up the trap
temporaries incurs a performance overhead that is unacceptable for
microbench performance in normal mode for certain customers.
In the scenario where the debugger spawns the target process, when ROCr
detects that the debugger has attached during the runtime enable
request, it will enable the trap temporaries before it blocks the target
process while waiting for the debugger to respond.
In the scenario where the debugger attaches to a running target process,
it will enable to trap temporaries itself.
Finally, there is an additional restriction that is required to be
enforced with runtime enable and HW debug mode setting. The debugger must
first ensure that HW debug mode has been enabled before permitting HW debug
mode operations.
With single process debug devices, allowing the debugger to set debug
HW modes prior to trap activation means that debug HW mode setting can
occur before the KFD has reserved the debug VMID (0xf) from the hardware
scheduler's VMID allocation resource pool. This can result in the
hardware scheduler assigning VMID 0xf to a non-debugged process and
having that process inherit debug HW mode settings intended for the
debugged target process instead, which is both incorrect and potentially
fatal for normal mode operation.
With multi process debug devices, allowing the debugger to set debug
HW modes prior to trap activation means that non-debugged processes
migrating to a new VMID could inherit unintended debug settings.
All debug operations that touch HW settings must require trap activation
where trap activation is triggered by both debug attach and runtime
enablement (target has KFD opened and is ready to dispatch work).
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>