OSDN Git Service
Linus Torvalds [Sat, 26 Feb 2022 17:53:19 +0000 (09:53 -0800)]
Merge tag 'xfs-5.17-fixes-2' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Nothing exciting, just more fixes for not returning sync_filesystem
error values (and eliding it when it's not necessary).
Summary:
- Only call sync_filesystem when we're remounting the filesystem
readonly readonly, and actually check its return value"
* tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: only bother with sync_filesystem during readonly remount
Linus Torvalds [Fri, 25 Feb 2022 22:12:36 +0000 (14:12 -0800)]
Merge tag 'configfs-5.17-2022-02-25' of git://git.infradead.org/users/hch/configfs
Pull configfs fix from Christoph Hellwig:
- fix a race in configfs_{,un}register_subsystem (ChenXiaoSong)
* tag 'configfs-5.17-2022-02-25' of git://git.infradead.org/users/hch/configfs:
configfs: fix a race in configfs_{,un}register_subsystem()
Linus Torvalds [Fri, 25 Feb 2022 22:08:03 +0000 (14:08 -0800)]
Merge tag 'for-5.17-rc5-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"This is a hopefully last batch of fixes for defrag that got broken in
5.16, all stable material.
The remaining reported problem is excessive IO with autodefrag due to
various conditions in the defrag code not met or missing"
* tag 'for-5.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: reduce extent threshold for autodefrag
btrfs: autodefrag: only scan one inode once
btrfs: defrag: don't use merged extent map for their generation check
btrfs: defrag: bring back the old file extent search behavior
btrfs: defrag: remove an ambiguous condition for rejection
btrfs: defrag: don't defrag extents which are already at max capacity
btrfs: defrag: don't try to merge regular extents with preallocated extents
btrfs: defrag: allow defrag_one_cluster() to skip large extent which is not a target
btrfs: prevent copying too big compressed lzo segment
Linus Torvalds [Fri, 25 Feb 2022 21:34:30 +0000 (13:34 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Older "does not even boot" regression in qib from July
- Bug fixes for error unwind in rtrs
- Avoid a deadlock syzkaller found in srp
- Fix another UAF syzkaller found in cma
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cma: Do not change route.addr.src_addr outside state checks
RDMA/ib_srp: Fix a deadlock
RDMA/rtrs-clt: Move free_permit from free_clt to rtrs_clt_close
RDMA/rtrs-clt: Fix possible double free in error case
IB/qib: Fix duplicate sysfs directory name
Linus Torvalds [Fri, 25 Feb 2022 20:56:11 +0000 (12:56 -0800)]
Merge tag 'gpio-fixes-for-v5.17-rc6' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an bug generating spurious interrupts in gpio-rockchip
- fix a race condition in gpiod_to_irq() called by GPIO consumers
* tag 'gpio-fixes-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: Return EPROBE_DEFER if gc->to_irq is NULL
gpio: rockchip: Reset int_bothedge when changing trigger
Jason Gunthorpe [Wed, 23 Feb 2022 15:23:57 +0000 (11:23 -0400)]
RDMA/cma: Do not change route.addr.src_addr outside state checks
If the state is not idle then resolve_prepare_src() should immediately
fail and no change to global state should happen. However, it
unconditionally overwrites the src_addr trying to build a temporary any
address.
For instance if the state is already RDMA_CM_LISTEN then this will corrupt
the src_addr and would cause the test in cma_cancel_operation():
if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev)
Which would manifest as this trace from syzkaller:
BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26
Read of size 8 at addr
ffff8881546491e0 by task syz-executor.1/32204
CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
__kasan_report mm/kasan/report.c:399 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
__list_add_valid+0x93/0xa0 lib/list_debug.c:26
__list_add include/linux/list.h:67 [inline]
list_add_tail include/linux/list.h:100 [inline]
cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline]
rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751
ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102
ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732
vfs_write+0x28e/0xa30 fs/read_write.c:603
ksys_write+0x1ee/0x250 fs/read_write.c:658
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
This is indicating that an rdma_id_private was destroyed without doing
cma_cancel_listens().
Instead of trying to re-use the src_addr memory to indirectly create an
any address derived from the dst build one explicitly on the stack and
bind to that as any other normal flow would do. rdma_bind_addr() will copy
it over the src_addr once it knows the state is valid.
This is similar to commit
bc0bdc5afaa7 ("RDMA/cma: Do not change
route.addr.src_addr.ss_family")
Link: https://lore.kernel.org/r/0-v2-e975c8fd9ef2+11e-syz_cma_srcaddr_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes:
732d41c545bb ("RDMA/cma: Make the locking for automatic state transition more clear")
Reported-by: syzbot+c94a3675a626f6333d74@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Linus Torvalds [Fri, 25 Feb 2022 20:37:41 +0000 (12:37 -0800)]
Merge tag 'spi-fix-v5.17-rc5' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes"
* tag 'spi-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rockchip: terminate dma transmission when slave abort
spi: rockchip: Fix error in getting num-cs property
spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op()
Linus Torvalds [Fri, 25 Feb 2022 20:33:51 +0000 (12:33 -0800)]
Merge tag 'regulator-fix-v5.17-rc5' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A series of fixes for the da9121 driver"
* tag 'regulator-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: da9121: Remove surplus DA9141 parameters
regulator: da9121: Fix DA914x voltage value
regulator: da9121: Fix DA914x current values
Linus Torvalds [Fri, 25 Feb 2022 20:30:01 +0000 (12:30 -0800)]
Merge tag 'regmap-fix-v5.17-rc5' of git://git./linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix for interrupt controllers which require the explicit
acknowledgement of interrupts using a different register to the one
where interrupts are reported.
Urgent for the few devices this affects"
* tag 'regmap-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Update interrupt clear register for proper reset
Linus Torvalds [Fri, 25 Feb 2022 20:25:44 +0000 (12:25 -0800)]
Merge tag 'thermal-5.17-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a memory leak in the int340x thermal driver's ACPI notify handler
(Chuansheng Liu)"
* tag 'thermal-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: fix memory leak in int3400_notify()
Linus Torvalds [Fri, 25 Feb 2022 20:17:20 +0000 (12:17 -0800)]
Merge tag 'pm-5.17-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix the throttle IRQ handling during cpufreq initialization on
Qualcomm platforms (Bjorn Andersson)"
* tag 'pm-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: qcom-hw: Delay enabling throttle_irq
cpufreq: Reintroduce ready() callback
Linus Torvalds [Fri, 25 Feb 2022 20:12:06 +0000 (12:12 -0800)]
Merge tag 'char-misc-5.17-rc6' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small driver fixes for 5.17-rc6 for reported issues.
The majority of these are IIO fixes for small things, and the other
two are a mvmem and mtd core conflict fix.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mtd: core: Fix a conflict between MTD and NVMEM on wp-gpios property
nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property
iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
iio: Fix error handling for PM
iio: addac: ad74413r: correct comparator gpio getters mask usage
iio: addac: ad74413r: use ngpio size when iterating over mask
iio: addac: ad74413r: Do not reference negative array offsets
iio: adc: men_z188_adc: Fix a resource leak in an error handling path
iio: frequency: admv1013: remove the always true condition
iio: accel: fxls8962af: add padding to regmap for SPI
iio:imu:adis16480: fix buffering for devices with no burst mode
iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits
iio: adc: tsc2046: fix memory corruption by preventing array overflow
Linus Torvalds [Fri, 25 Feb 2022 20:05:40 +0000 (12:05 -0800)]
Merge tag 'driver-core-5.17-rc6' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for 5.17-rc6. It resolves a reported
problem when the DMA map of a device is not properly released.
It has been in linux-next with no reported problems"
* tag 'driver-core-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Free DMA range map when device is released
Linus Torvalds [Fri, 25 Feb 2022 19:56:16 +0000 (11:56 -0800)]
Merge tag 'staging-5.17-rc6' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 5.17-rc6.
It resolves a reported problem in the fbtft fb_st7789v.c driver that
could cause the display to be flipped in cold weather.
It has been in linux-next with no reported problems"
* tag 'staging-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: fbtft: fb_st7789v: reset display before initialization
Linus Torvalds [Fri, 25 Feb 2022 19:45:29 +0000 (11:45 -0800)]
Merge tag 'tty-5.17-rc6' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small n_gsm and sc16is7xx serial driver fixes for
5.17-rc6.
The n_gsm fixes are from Siemens as it seems they are using the line
discipline and fixing up a number of issues they found in their
testing. The sc16is7xx serial driver fix is for a reported problem
with that chip.
All of these have been in linux-next with no reported problems"
* tag 'tty-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
sc16is7xx: Fix for incorrect data being transmitted
tty: n_gsm: fix deadlock in gsmtty_open()
tty: n_gsm: fix wrong modem processing in convergence layer type 2
tty: n_gsm: fix wrong tty control line for flow control
tty: n_gsm: fix NULL pointer access due to DLCI release
tty: n_gsm: fix proper link termination after failed open
tty: n_gsm: fix encoding of command/response bit
tty: n_gsm: fix encoding of control signal octet bit DV
Linus Torvalds [Fri, 25 Feb 2022 19:36:31 +0000 (11:36 -0800)]
Merge tag 'usb-5.17-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.17-rc6 to resolve
reported problems and add new device ids. They include:
- dwc3:
- device mapping fix
- new device ids
- driver fixes
- xhci driver fixes
- gadget driver fixes
- usb-serial driver device id updates
All of these have been in linux-next with no reported problems"
* tag 'usb-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: rndis: add spinlock for rndis response list
usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
USB: gadget: validate endpoint index for xilinx udc
USB: serial: option: add Telit LE910R1 compositions
USB: serial: option: add support for DW5829e
Revert "USB: serial: ch341: add new Product ID for CH341A"
usb: dwc2: drd: fix soft connect when gadget is unconfigured
usb: dwc3: pci: Fix Bay Trail phy GPIO mappings
tps6598x: clear int mask on probe failure
xhci: Prevent futile URB re-submissions due to incorrect return value.
xhci: re-initialize the HC during resume if HCE was set
usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay Trail
usb: dwc3: pci: add support for the Intel Raptor Lake-S
Linus Torvalds [Fri, 25 Feb 2022 19:22:19 +0000 (11:22 -0800)]
Merge tag 'ata-5.17-rc6' of git://git./linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
"Two fixes for the pata_hpt37x driver, both from Sergey:
- Fix a PCI register access using an incorrect size (8bits instead of
16bits)
- Make sure to always disable the primary channel as it is unused"
* tag 'ata-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_hpt37x: disable primary channel on HPT371
ata: pata_hpt37x: fix PCI clock detection
Linus Torvalds [Fri, 25 Feb 2022 01:35:22 +0000 (17:35 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple driver fixes in the clk subsystem
- Fix a hang due to bad clk parent in the Ingenic jz4725b driver
- Fix SD controllers on Qualcomm MSM8994 SoCs by removing clks that
shouldn't be touched"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: jz4725b: fix mmc0 clock gating
clk: qcom: gcc-msm8994: Remove NoC clocks
Linus Torvalds [Fri, 25 Feb 2022 01:29:26 +0000 (17:29 -0800)]
Merge tag 'drm-fixes-2022-02-25' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular drm fixes pull, i915, amdgpu and tegra mostly, all pretty
small.
core:
- edid: Always set RGB444
tegra:
- tegra186 suspend/resume fixes
- syncpoint wait fix
- build warning fix
- eDP on older devices fix
amdgpu:
- Display FP fix
- PCO powergating fix
- RDNA2 OEM SKU stability fixes
- Display PSR fix
- PCI ASPM fix
- Display link encoder fix for TEST_COMMIT
- Raven2 suspend/resume fix
- Fix a regression in virtual display support
- GPUVM eviction fix
i915:
- Fix QGV handling on ADL-P+
- Fix bw atomic check when switching between SAGV vs. no SAGV
- Disconnect PHYs left connected by BIOS on disabled ports
- Fix SAVG to no SAGV transitions on TGL+
- Print PHY name properly on calibration error (DG2)
imx:
- dcss: Select GEM CMA helpers
radeon:
- Fix some variables's type
vc4:
- Fix codec cleanup
- Fix PM reference counting"
* tag 'drm-fixes-2022-02-25' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amdgpu: check vm ready by amdgpu_vm->evicting flag
drm/amdgpu: bypass tiling flag check in virtual display case (v2)
Revert "drm/amdgpu: add modifiers in amdgpu_vkms_plane_init()"
drm/amdgpu: do not enable asic reset for raven2
drm/amd/display: Fix stream->link_enc unassigned during stream removal
drm/amd: Check if ASPM is enabled from PCIe subsystem
drm/edid: Always set RGB444
drm/tegra: dpaux: Populate AUX bus
drm/radeon: fix variable type
drm/amd/display: For vblank_disable_immediate, check PSR is really used
drm/amd/pm: fix some OEM SKU specific stability issues
drm/amdgpu: disable MMHUB PG for Picasso
drm/amd/display: Protect update_bw_bounding_box FPU code.
drm/i915/dg2: Print PHY name properly on calibration error
drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV
drm/i915: Correctly populate use_sagv_wm for all pipes
drm/i915: Disconnect PHYs left connected by BIOS on disabled ports
drm/i915: Widen the QGV point mask
drm/imx/dcss: i.MX8MQ DCSS select DRM_GEM_CMA_HELPER
drm/vc4: crtc: Fix runtime_pm reference counting
...
Linus Torvalds [Thu, 24 Feb 2022 22:36:38 +0000 (14:36 -0800)]
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix double free in in the error path when opening perf.data from
multiple files in a directory instead of from a single file
- Sync the msr-index.h copy with the kernel sources
- Fix error when printing 'weight' field in 'perf script'
- Skip failing sigtrap test for arm+aarch64 in 'perf test'
- Fix failure to use a cpu list for uncore events in hybrid systems,
e.g. Intel Alder Lake
* tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf script: Fix error when printing 'weight' field
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf data: Fix double free in perf_session__delete()
perf evlist: Fix failed to use cpu list for uncore events
perf test: Skip failing sigtrap test for arm+aarch64
Linus Torvalds [Thu, 24 Feb 2022 22:05:49 +0000 (14:05 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86 host:
- Expose KVM_CAP_ENABLE_CAP since it is supported
- Disable KVM_HC_CLOCK_PAIRING in TSC catchup mode
- Ensure async page fault token is nonzero
- Fix lockdep false negative
- Fix FPU migration regression from the AMX changes
x86 guest:
- Don't use PV TLB/IPI/yield on uniprocessor guests
PPC:
- reserve capability id (topic branch for ppc/kvm)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled
KVM: x86/mmu: make apf token non-zero to fix bug
KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3
x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU
x86/kvm: Fix compilation warning in non-x86_64 builds
x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0
x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0
kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode
KVM: Fix lockdep false negative during host resume
KVM: x86: Add KVM_CAP_ENABLE_CAP to x86
Linus Torvalds [Thu, 24 Feb 2022 21:19:57 +0000 (13:19 -0800)]
Merge tag 'pci-v5.17-fixes-5' of git://git./linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Fix a merge error that broke PCI device enumeration on mvebu
platforms, including Turris Omnia (Armada 385) (Pali Rohár)
- Avoid using ATS on all AMD Navi10 and Navi14 GPUs because some
VBIOSes don't account for "harvested" (disabled) parts of the chip
when initializing caches (Alex Deucher)
* tag 'pci-v5.17-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken
PCI: mvebu: Fix device enumeration regression
Linus Torvalds [Thu, 24 Feb 2022 20:45:32 +0000 (12:45 -0800)]
Merge tag 'net-5.17-rc6' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- bpf: fix crash due to out of bounds access into reg2btf_ids
- mvpp2: always set port pcs ops, avoid null-deref
- eth: marvell: fix driver load from initrd
- eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"
Current release - new code bugs:
- mptcp: fix race in overlapping signal events
Previous releases - regressions:
- xen-netback: revert hotplug-status changes causing devices to not
be configured
- dsa:
- avoid call to __dev_set_promiscuity() while rtnl_mutex isn't
held
- fix panic when removing unoffloaded port from bridge
- dsa: microchip: fix bridging with more than two member ports
Previous releases - always broken:
- bpf:
- fix crash due to incorrect copy_map_value when both spin lock
and timer are present in a single value
- fix a bpf_timer initialization issue with clang
- do not try bpf_msg_push_data with len 0
- add schedule points in batch ops
- nf_tables:
- unregister flowtable hooks on netns exit
- correct flow offload action array size
- fix a couple of memory leaks
- vsock: don't check owner in vhost_vsock_stop() while releasing
- gso: do not skip outer ip header in case of ipip and net_failover
- smc: use a mutex for locking "struct smc_pnettable"
- openvswitch: fix setting ipv6 fields causing hw csum failure
- mptcp: fix race in incoming ADD_ADDR option processing
- sysfs: add check for netdevice being present to speed_show
- sched: act_ct: fix flow table lookup after ct clear or switching
zones
- eth: intel: fixes for SR-IOV forwarding offloads
- eth: broadcom: fixes for selftests and error recovery
- eth: mellanox: flow steering and SR-IOV forwarding fixes
Misc:
- make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
friends not report freed skbs as drops
- force inlining of checksum functions in net/checksum.h"
* tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: mv643xx_eth: process retval from of_get_mac_address
ping: remove pr_err from ping_lookup
Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
openvswitch: Fix setting ipv6 fields causing hw csum failure
ipv6: prevent a possible race condition with lifetimes
net/smc: Use a mutex for locking "struct smc_pnettable"
bnx2x: fix driver load from initrd
Revert "xen-netback: Check for hotplug-status existence before watching"
Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
net/mlx5e: Fix VF min/max rate parameters interchange mistake
net/mlx5e: Add missing increment of count
net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
net/mlx5e: Add feature check for set fec counters
net/mlx5e: TC, Skip redundant ct clear actions
net/mlx5e: TC, Reject rules with forward and drop actions
net/mlx5e: TC, Reject rules with drop and modify hdr action
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
net/mlx5: Fix possible deadlock on rule deletion
...
Dave Airlie [Thu, 24 Feb 2022 19:51:04 +0000 (05:51 +1000)]
Merge tag 'drm-intel-fixes-2022-02-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix QGV handling on ADL-P+ (Ville Syrjälä)
- Fix bw atomic check when switching between SAGV vs. no SAGV (Ville Syrjälä)
- Disconnect PHYs left connected by BIOS on disabled ports (Imre Deak)
- Fix SAVG to no SAGV transitions on TGL+ (Ville Syrjälä)
- Print PHY name properly on calibration error (DG2) (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YhdyHwRWkOTWwlqi@tursulin-mobl2
Linus Torvalds [Thu, 24 Feb 2022 19:15:10 +0000 (11:15 -0800)]
Merge tag 'block-5.17-2022-02-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request:
- send H2CData PDUs based on MAXH2CDATA (Varun Prakash)
- fix passthrough to namespaces with unsupported features (Christoph
Hellwig)
- Clear iocb->private at poll completion (Stefano)
* tag 'block-5.17-2022-02-24' of git://git.kernel.dk/linux-block:
nvme-tcp: send H2CData PDUs based on MAXH2CDATA
nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info
nvme: don't return an error from nvme_configure_metadata
block: clear iocb->private in blkdev_bio_end_io_async()
Chuansheng Liu [Wed, 23 Feb 2022 00:20:24 +0000 (08:20 +0800)]
thermal: int340x: fix memory leak in int3400_notify()
It is easy to hit the below memory leaks in my TigerLake platform:
unreferenced object 0xffff927c8b91dbc0 (size 32):
comm "kworker/0:2", pid 112, jiffies
4294893323 (age 83.604s)
hex dump (first 32 bytes):
4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The
72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk.
backtrace:
[<
ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0
[<
ffffffff9c7b7c15>] kvasprintf+0x65/0xd0
[<
ffffffff9c7b7d6e>] kasprintf+0x4e/0x70
[<
ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal]
[<
ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71
[<
ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30
[<
ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0
[<
ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0
[<
ffffffff9c2cb4dd>] kthread+0xfd/0x130
[<
ffffffff9c201c1f>] ret_from_fork+0x1f/0x30
Fix it by calling kfree() accordingly.
Fixes:
38e44da59130 ("thermal: int3400_thermal: process "thermal table changed" event")
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Thu, 24 Feb 2022 19:08:15 +0000 (11:08 -0800)]
Merge tag 'io_uring-5.17-2022-02-23' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Add a conditional schedule point in io_add_buffers() (Eric)
- Fix for a quiesce speedup merged in this release (Dylan)
- Don't convert to jiffies for event timeout waiting, it's way too
coarse when we accept a timespec as input (me)
* tag 'io_uring-5.17-2022-02-23' of git://git.kernel.dk/linux-block:
io_uring: disallow modification of rsrc_data during quiesce
io_uring: don't convert to jiffies for waiting on timeouts
io_uring: add a schedule point in io_add_buffers()
Rafael J. Wysocki [Thu, 24 Feb 2022 18:54:59 +0000 (19:54 +0100)]
Merge branch 'cpufreq/arm/fixes' of git://git./linux/kernel/git/vireshk/pm
Pull ARM cpufreq fixes for 5.18-rc6 from Viresh Kumar:
"This fixes issues related to throttle IRQ for Qcom SoCs."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Delay enabling throttle_irq
cpufreq: Reintroduce ready() callback
Linus Torvalds [Thu, 24 Feb 2022 18:42:20 +0000 (10:42 -0800)]
Merge tag 'platform-drivers-x86-v5.17-4' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull more x86 platform driver fixes from Hans de Goede:
"Two more fixes:
- Fix suspend/resume regression on AMD Cezanne APUs in >= 5.16
- Fix Microsoft Surface 3 battery readings"
* tag 'platform-drivers-x86-v5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
surface: surface3_power: Fix battery readings on batteries without a serial number
platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup
Mauri Sandberg [Wed, 23 Feb 2022 14:23:37 +0000 (16:23 +0200)]
net: mv643xx_eth: process retval from of_get_mac_address
Obtaining a MAC address may be deferred in cases when the MAC is stored
in an NVMEM block, for example, and it may not be ready upon the first
retrieval attempt and return EPROBE_DEFER.
It is also possible that a port that does not rely on NVMEM has been
already created when getting the defer request. Thus, also the resources
allocated previously must be freed when doing a roll-back.
Fixes:
76723bca2802 ("net: mv643xx_eth: add DT parsing support")
Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220223142337.41757-1-maukka@ext.kapsi.fi
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxim Levitsky [Wed, 23 Feb 2022 11:56:49 +0000 (13:56 +0200)]
KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled
If nested tsc scaling is disabled, MSR_AMD64_TSC_RATIO should
never have non default value.
Due to way nested tsc scaling support was implmented in qemu,
it would set this msr to 0 when nested tsc scaling was disabled.
Ignore that value for now, as it causes no harm.
Fixes:
5228eb96a487 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20220223115649.319134-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liang Zhang [Tue, 22 Feb 2022 03:12:39 +0000 (11:12 +0800)]
KVM: x86/mmu: make apf token non-zero to fix bug
In current async pagefault logic, when a page is ready, KVM relies on
kvm_arch_can_dequeue_async_page_present() to determine whether to deliver
a READY event to the Guest. This function test token value of struct
kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a
READY event is finished by Guest. If value is zero meaning that a READY
event is done, so the KVM can deliver another.
But the kvm_arch_setup_async_pf() may produce a valid token with zero
value, which is confused with previous mention and may lead the loss of
this READY event.
This bug may cause task blocked forever in Guest:
INFO: task stress:7532 blocked for more than 1254 seconds.
Not tainted 5.10.0 #16
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:stress state:D stack: 0 pid: 7532 ppid: 1409
flags:0x00000080
Call Trace:
__schedule+0x1e7/0x650
schedule+0x46/0xb0
kvm_async_pf_task_wait_schedule+0xad/0xe0
? exit_to_user_mode_prepare+0x60/0x70
__kvm_handle_async_pf+0x4f/0xb0
? asm_exc_page_fault+0x8/0x30
exc_page_fault+0x6f/0x110
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x402d00
RSP: 002b:
00007ffd31912500 EFLAGS:
00010206
RAX:
0000000000071000 RBX:
ffffffffffffffff RCX:
00000000021a32b0
RDX:
000000000007d011 RSI:
000000000007d000 RDI:
00000000021262b0
RBP:
00000000021262b0 R08:
0000000000000003 R09:
0000000000000086
R10:
00000000000000eb R11:
00007fefbdf2baa0 R12:
0000000000000000
R13:
0000000000000002 R14:
000000000007d000 R15:
0000000000001000
Signed-off-by: Liang Zhang <zhangliang5@huawei.com>
Message-Id: <
20220222031239.
1076682-1-zhangliang5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xin Long [Thu, 24 Feb 2022 03:41:08 +0000 (22:41 -0500)]
ping: remove pr_err from ping_lookup
As Jakub noticed, prints should be avoided on the datapath.
Also, as packets would never come to the else branch in
ping_lookup(), remove pr_err() from ping_lookup().
Fixes:
35a79e64de29 ("ping: fix the dif and sdif check in ping_lookup")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mateusz Palczewski [Wed, 23 Feb 2022 17:53:47 +0000 (09:53 -0800)]
Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
Revert of a patch that instead of fixing a AQ error when trying
to reset BW limit introduced several regressions related to
creation and managing TC. Currently there are errors when creating
a TC on both PF and VF.
Error log:
[17428.783095] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14
[17428.783107] i40e 0000:3b:00.1: Failed configuring TC map 0 for VSI 391
[17428.783254] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14
[17428.783259] i40e 0000:3b:00.1: Unable to configure TC map 0 for VSI 391
This reverts commit
3d2504663c41104b4359a15f35670cfa82de1bbf.
Fixes:
3d2504663c41 (i40e: Fix reset bw limit when DCB enabled with 1 TC)
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220223175347.1690692-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Wed, 23 Feb 2022 16:34:16 +0000 (18:34 +0200)]
openvswitch: Fix setting ipv6 fields causing hw csum failure
Ipv6 ttl, label and tos fields are modified without first
pulling/pushing the ipv6 header, which would have updated
the hw csum (if available). This might cause csum validation
when sending the packet to the stack, as can be seen in
the trace below.
Fix this by updating skb->csum if available.
Trace resulted by ipv6 ttl dec and then sending packet
to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]:
[295241.900063] s_pf0vf2: hw csum failure
[295241.923191] Call Trace:
[295241.925728] <IRQ>
[295241.927836] dump_stack+0x5c/0x80
[295241.931240] __skb_checksum_complete+0xac/0xc0
[295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack]
[295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack]
[295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch]
[295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch]
[295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch]
[295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch]
[295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch]
[295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch]
[295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch]
[295242.034074] __netif_receive_skb_core+0x2ca/0xcb0
[295242.047498] netif_receive_skb_internal+0x3e/0xc0
[295242.052291] napi_gro_receive+0xba/0xe0
[295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core]
[295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core]
[295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core]
[295242.077958] net_rx_action+0x149/0x3b0
[295242.086762] __do_softirq+0xd7/0x2d6
[295242.090427] irq_exit+0xf7/0x100
[295242.093748] do_IRQ+0x7f/0xd0
[295242.096806] common_interrupt+0xf/0xf
[295242.100559] </IRQ>
[295242.102750] RIP: 0033:0x7f9022e88cbd
[295242.125246] RSP: 002b:
00007f9022282b20 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffffda
[295242.132900] RAX:
0000000000000005 RBX:
0000000000000010 RCX:
0000000000000000
[295242.140120] RDX:
00007f9022282ba8 RSI:
00007f9022282a30 RDI:
00007f9014005c30
[295242.147337] RBP:
00007f9014014d60 R08:
0000000000000020 R09:
00007f90254a8340
[295242.154557] R10:
00007f9022282a28 R11:
0000000000000246 R12:
0000000000000000
[295242.161775] R13:
00007f902308c000 R14:
000000000000002b R15:
00007f9022b71f40
Fixes:
3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Niels Dossche [Wed, 23 Feb 2022 13:19:56 +0000 (14:19 +0100)]
ipv6: prevent a possible race condition with lifetimes
valid_lft, prefered_lft and tstamp are always accessed under the lock
"lock" in other places. Reading these without taking the lock may result
in inconsistencies regarding the calculation of the valid and preferred
variables since decisions are taken on these fields for those variables.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fabio M. De Francesco [Wed, 23 Feb 2022 10:02:52 +0000 (11:02 +0100)]
net/smc: Use a mutex for locking "struct smc_pnettable"
smc_pnetid_by_table_ib() uses read_lock() and then it calls smc_pnet_apply_ib()
which, in turn, calls mutex_lock(&smc_ib_devices.mutex).
read_lock() disables preemption. Therefore, the code acquires a mutex while in
atomic context and it leads to a SAC bug.
Fix this bug by replacing the rwlock with a mutex.
Reported-and-tested-by: syzbot+4f322a6d84e991c38775@syzkaller.appspotmail.com
Fixes:
64e28b52c7a6 ("net/smc: add pnet table namespace support")
Confirmed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220223100252.22562-1-fmdefrancesco@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Manish Chopra [Wed, 23 Feb 2022 08:57:20 +0000 (00:57 -0800)]
bnx2x: fix driver load from initrd
Commit
b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") added
new firmware support in the driver with maintaining older firmware
compatibility. However, older firmware was not added in MODULE_FIRMWARE()
which caused missing firmware files in initrd image leading to driver load
failure from initrd. This patch adds MODULE_FIRMWARE() for older firmware
version to have firmware files included in initrd.
Fixes:
b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215627
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220223085720.12021-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek Marczykowski-Górecki [Tue, 22 Feb 2022 00:18:17 +0000 (01:18 +0100)]
Revert "xen-netback: Check for hotplug-status existence before watching"
This reverts commit
2afeec08ab5c86ae21952151f726bfe184f6b23d.
The reasoning in the commit was wrong - the code expected to setup the
watch even if 'hotplug-status' didn't exist. In fact, it relied on the
watch being fired the first time - to check if maybe 'hotplug-status' is
already set to 'connected'. Not registering a watch for non-existing
path (which is the case if hotplug script hasn't been executed yet),
made the backend not waiting for the hotplug script to execute. This in
turns, made the netfront think the interface is fully operational, while
in fact it was not (the vif interface on xen-netback side might not be
configured yet).
This was a workaround for 'hotplug-status' erroneously being removed.
But since that is reverted now, the workaround is not necessary either.
More discussion at
https://lore.kernel.org/xen-devel/
afedd7cb-a291-e773-8b0d-
4db9b291fa98@ipxe.org/T/#u
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Michael Brown <mbrown@fensystems.co.uk>
Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek Marczykowski-Górecki [Tue, 22 Feb 2022 00:18:16 +0000 (01:18 +0100)]
Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
This reverts commit
1f2565780e9b7218cf92c7630130e82dcc0fe9c2.
The 'hotplug-status' node should not be removed as long as the vif
device remains configured. Otherwise the xen-netback would wait for
re-running the network script even if it was already called (in case of
the frontent re-connecting). But also, it _should_ be removed when the
vif device is destroyed (for example when unbinding the driver) -
otherwise hotplug script would not configure the device whenever it
re-appear.
Moving removal of the 'hotplug-status' node was a workaround for nothing
calling network script after xen-netback module is reloaded. But when
vif interface is re-created (on xen-netback unbind/bind for example),
the script should be called, regardless of who does that - currently
this case is not handled by the toolstack, and requires manual
script call. Keeping hotplug-status=connected to skip the call is wrong
and leads to not configured interface.
More discussion at
https://lore.kernel.org/xen-devel/
afedd7cb-a291-e773-8b0d-
4db9b291fa98@ipxe.org/T/#u
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Qu Wenruo [Sun, 13 Feb 2022 07:42:33 +0000 (15:42 +0800)]
btrfs: reduce extent threshold for autodefrag
There is a big gap between inode_should_defrag() and autodefrag extent
size threshold. For inode_should_defrag() it has a flexible
@small_write value. For compressed extent is 16K, and for non-compressed
extent it's 64K.
However for autodefrag extent size threshold, it's always fixed to the
default value (256K).
This means, the following write sequence will trigger autodefrag to
defrag ranges which didn't trigger autodefrag:
pwrite 0 8k
sync
pwrite 8k 128K
sync
The latter 128K write will also be considered as a defrag target (if
other conditions are met). While only that 8K write is really
triggering autodefrag.
Such behavior can cause extra IO for autodefrag.
Close the gap, by copying the @small_write value into inode_defrag, so
that later autodefrag can use the same @small_write value which
triggered autodefrag.
With the existing transid value, this allows autodefrag really to scan
the ranges which triggered autodefrag.
Although this behavior change is mostly reducing the extent_thresh value
for autodefrag, I believe in the future we should allow users to specify
the autodefrag extent threshold through mount options, but that's an
other problem to consider in the future.
CC: stable@vger.kernel.org # 5.16+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jens Axboe [Thu, 24 Feb 2022 14:02:15 +0000 (07:02 -0700)]
Merge tag 'nvme-5.17-2022-02-24' of git://git.infradead.org/nvme into block-5.17
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.17
- send H2CData PDUs based on MAXH2CDATA (Varun Prakash)
- fix passthrough to namespaces with unsupported features (me)"
* tag 'nvme-5.17-2022-02-24' of git://git.infradead.org/nvme:
nvme-tcp: send H2CData PDUs based on MAXH2CDATA
nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info
nvme: don't return an error from nvme_configure_metadata
Greg Kroah-Hartman [Thu, 24 Feb 2022 13:51:45 +0000 (14:51 +0100)]
Merge tag 'usb-serial-5.17-rc6' of https://git./linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.17-rc6
Here's a revert of a commit which erroneously added a device id used for
the EPP/MEM mode of ch341 devices.
Included are also some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.17-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit LE910R1 compositions
USB: serial: option: add support for DW5829e
Revert "USB: serial: ch341: add new Product ID for CH341A"
Hans de Goede [Thu, 24 Feb 2022 10:18:48 +0000 (11:18 +0100)]
surface: surface3_power: Fix battery readings on batteries without a serial number
The battery on the 2nd hand Surface 3 which I recently bought appears to
not have a serial number programmed in. This results in any I2C reads from
the registers containing the serial number failing with an I2C NACK.
This was causing mshw0011_bix() to fail causing the battery readings to
not work at all.
Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and
continue with an empty serial number to fix this.
Fixes:
b1f81b496b0d ("platform/x86: surface3_power: MSHW0011 rev-eng implementation")
BugLink: https://github.com/linux-surface/linux-surface/issues/608
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220224101848.7219-1-hdegoede@redhat.com
Mario Limonciello [Wed, 23 Feb 2022 17:52:37 +0000 (11:52 -0600)]
platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup
commit
59348401ebed ("platform/x86: amd-pmc: Add special handling for
timer based S0i3 wakeup") adds support for using another platform timer
in lieu of the RTC which doesn't work properly on some systems. This path
was validated and worked well before submission. During the 5.16-rc1 merge
window other patches were merged that caused this to stop working properly.
When this feature was used with 5.16-rc1 or later some OEM laptops with the
matching firmware requirements from that commit would shutdown instead of
program a timer based wakeup.
This was bisected to commit
8d89835b0467 ("PM: suspend: Do not pause
cpuidle in the suspend-to-idle path"). This wasn't supposed to cause any
negative impacts and also tested well on both Intel and ARM platforms.
However this changed the semantics of when CPUs are allowed to be in the
deepest state. For the AMD systems in question it appears this causes a
firmware crash for timer based wakeup.
It's hypothesized to be caused by the `amd-pmc` driver sending `OS_HINT`
and all the CPUs going into a deep state while the timer is still being
programmed. It's likely a firmware bug, but to avoid it don't allow setting
CPUs into the deepest state while using CZN timer wakeup path.
If later it's discovered that this also occurs from "regular" suspends
without a timer as well or on other silicon, this may be later expanded to
run in the suspend path for more scenarios.
Cc: stable@vger.kernel.org # 5.16+
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/linux-acpi/BL1PR12MB51570F5BD05980A0DCA1F3F4E23A9@BL1PR12MB5157.namprd12.prod.outlook.com/T/#mee35f39c41a04b624700ab2621c795367f19c90e
Fixes:
8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Fixes:
23f62d7ab25b ("PM: sleep: Pause cpuidle later and resume it earlier during system transitions")
Fixes:
59348401ebed ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup"
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220223175237.6209-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Daehwan Jung [Tue, 22 Feb 2022 05:29:28 +0000 (14:29 +0900)]
usb: gadget: rndis: add spinlock for rndis response list
There's no lock for rndis response list. It could cause list corruption
if there're two different list_add at the same time like below.
It's better to add in rndis_add_response / rndis_free_response
/ rndis_get_next_response to prevent any race condition on response list.
[ 361.894299] [1: irq/191-dwc3:16979] list_add corruption.
next->prev should be prev (
ffffff80651764d0),
but was
ffffff883dc36f80. (next=
ffffff80651764d0).
[ 361.904380] [1: irq/191-dwc3:16979] Call trace:
[ 361.904391] [1: irq/191-dwc3:16979] __list_add_valid+0x74/0x90
[ 361.904401] [1: irq/191-dwc3:16979] rndis_msg_parser+0x168/0x8c0
[ 361.904409] [1: irq/191-dwc3:16979] rndis_command_complete+0x24/0x84
[ 361.904417] [1: irq/191-dwc3:16979] usb_gadget_giveback_request+0x20/0xe4
[ 361.904426] [1: irq/191-dwc3:16979] dwc3_gadget_giveback+0x44/0x60
[ 361.904434] [1: irq/191-dwc3:16979] dwc3_ep0_complete_data+0x1e8/0x3a0
[ 361.904442] [1: irq/191-dwc3:16979] dwc3_ep0_interrupt+0x29c/0x3dc
[ 361.904450] [1: irq/191-dwc3:16979] dwc3_process_event_entry+0x78/0x6cc
[ 361.904457] [1: irq/191-dwc3:16979] dwc3_process_event_buf+0xa0/0x1ec
[ 361.904465] [1: irq/191-dwc3:16979] dwc3_thread_interrupt+0x34/0x5c
Fixes:
f6281af9d62e ("usb: gadget: rndis: use list_for_each_entry_safe")
Cc: stable <stable@kernel.org>
Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
Link: https://lore.kernel.org/r/1645507768-77687-1-git-send-email-dh10.jung@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Andrzej Siewior [Fri, 18 Feb 2022 17:32:45 +0000 (18:32 +0100)]
usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.
Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.
Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.
Link: https://lkml.kernel.org/r/c2a64979-73d1-2c22-e048-c275c9f81558@samsung.com
Fixes:
e5f68b4a3e7b0 ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"")
Cc: stable <stable@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/Yg/YPejVQH3KkRVd@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Szymon Heidrich [Mon, 21 Feb 2022 12:24:56 +0000 (13:24 +0100)]
USB: gadget: validate endpoint index for xilinx udc
Assure that host may not manipulate the index to point
past endpoint array.
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jakub Kicinski [Thu, 24 Feb 2022 04:30:00 +0000 (20:30 -0800)]
Merge tag 'mlx5-fixes-2022-02-23' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-02-22
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
* tag 'mlx5-fixes-2022-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix VF min/max rate parameters interchange mistake
net/mlx5e: Add missing increment of count
net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
net/mlx5e: Add feature check for set fec counters
net/mlx5e: TC, Skip redundant ct clear actions
net/mlx5e: TC, Reject rules with forward and drop actions
net/mlx5e: TC, Reject rules with drop and modify hdr action
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
net/mlx5: Fix possible deadlock on rule deletion
net/mlx5: Fix tc max supported prio for nic mode
net/mlx5: Fix wrong limitation of metadata match on ecpf
net/mlx5: Update log_max_qp value to be 17 at most
net/mlx5: DR, Fix the threshold that defines when pool sync is initiated
net/mlx5: DR, Don't allow match on IP w/o matching on full ethertype/ip_version
net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fte
net/mlx5: DR, Cache STE shadow memory
net/mlx5: Update the list of the PCI supported devices
====================
Link: https://lore.kernel.org/r/20220224001123.365265-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dave Airlie [Thu, 24 Feb 2022 04:27:35 +0000 (14:27 +1000)]
Merge tag 'amd-drm-fixes-5.17-2022-02-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.17-2022-02-23:
amdgpu:
- Display FP fix
- PCO powergating fix
- RDNA2 OEM SKU stability fixes
- Display PSR fix
- PCI ASPM fix
- Display link encoder fix for TEST_COMMIT
- Raven2 suspend/resume fix
- Fix a regression in virtual display support
- GPUVM eviction fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223214623.28823-1-alexander.deucher@amd.com
Dave Airlie [Thu, 24 Feb 2022 04:21:57 +0000 (14:21 +1000)]
Merge tag 'drm/tegra/for-5.17-rc6' of https://gitlab.freedesktop.org/drm/tegra into drm-fixes
drm/tegra: Fixes for v5.17-rc6
Contains a couple of fixes for Tegra186 suspend/resume, syncpoint
waiting, a build warning and eDP on older Tegra devices.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223161903.293392-1-thierry.reding@gmail.com
Dave Airlie [Thu, 24 Feb 2022 03:51:46 +0000 (13:51 +1000)]
Merge tag 'drm-misc-fixes-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* edid: Always set RGB444
* imx/dcss: Select GEM CMA helpers
* radeon: Fix some variables's type
* vc4: Fix codec cleanup; Fix PM reference counting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YhaKj4zWJ42YWRts@linux-uq9g.fritz.box
Linus Torvalds [Thu, 24 Feb 2022 01:25:22 +0000 (17:25 -0800)]
Merge tag 'devicetree-fixes-for-5.17-2' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Update some maintainers email addresses
- Fix handling of elfcorehdr reservation for crash dump kernel
- Fix unittest expected warnings text
* tag 'devicetree-fixes-for-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: update Roger Quadros email
MAINTAINERS: sifive: drop Yash Shah
of/fdt: move elfcorehdr reservation early for crash dump kernel
of: unittest: update text of expected warnings
Linus Torvalds [Thu, 24 Feb 2022 01:19:55 +0000 (17:19 -0800)]
Merge tag 'selinux-pr-
20220223' of git://git./linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A second small SELinux fix which addresses an incorrect
mutex_is_locked() check"
* tag 'selinux-pr-
20220223' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix misuse of mutex_is_locked()
Gal Pressman [Mon, 21 Feb 2022 15:54:34 +0000 (17:54 +0200)]
net/mlx5e: Fix VF min/max rate parameters interchange mistake
The VF min and max rate were passed incorrectly and resulted in wrongly
interchanging them. Fix the order of parameters in
mlx5_esw_qos_set_vport_rate().
Fixes:
d7df09f5e7b4 ("net/mlx5: E-switch, Enable vport QoS on demand")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Lama Kayal [Mon, 21 Feb 2022 10:26:11 +0000 (12:26 +0200)]
net/mlx5e: Add missing increment of count
Add mistakenly missing increment of count variable when looping over
output buffer in mlx5e_self_test().
This resolves the issue of garbage values output when querying with self
test via ethtool.
before:
$ ethtool -t eth2
The test result is PASS
The test extra info:
Link Test 0
Speed Test
1768697188
Health Test
758528120
Loopback Test
3288687
after:
$ ethtool -t eth2
The test result is PASS
The test extra info:
Link Test 0
Speed Test 0
Health Test 0
Loopback Test 0
Fixes:
7990b1b5e8bd ("net/mlx5e: loopback test is not supported in switchdev mode")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Thu, 6 Jan 2022 12:46:24 +0000 (14:46 +0200)]
net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
Currently offload of rule on bareudp device require tunnel key
in order to match on mpls fields and without it the mpls fields
are ignored, this is incorrect due to the fact udp tunnel doesn't
have key to match on.
Fix by returning error in case flow is matching on tunnel key.
Fixes:
72046a91d134 ("net/mlx5e: Allow to match on mpls parameters")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Thu, 6 Jan 2022 12:10:18 +0000 (14:10 +0200)]
net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
Currently the MPLSoUDP encap builds the MPLS header using encap action
information (tunnel id, ttl and tos) instead of the MPLS action
information (label, ttl, tc and bos) which is wrong.
Fix by storing the MPLS action information during the flow action
parse and later using it to create the encap MPLS header.
Fixes:
f828ca6a2fb6 ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Lama Kayal [Tue, 1 Feb 2022 09:24:41 +0000 (11:24 +0200)]
net/mlx5e: Add feature check for set fec counters
Fec counters support is checked via the PCAM feature_cap_mask,
bit 0: PPCNT_counter_group_Phy_statistical_counter_group.
Add feature check to avoid faulty behavior.
Fixes:
0a1498ebfa55 ("net/mlx5e: Expose FEC counters via ethtool")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Thu, 3 Feb 2022 07:42:19 +0000 (09:42 +0200)]
net/mlx5e: TC, Skip redundant ct clear actions
Offload of ct clear action is just resetting the reg_c register.
It's done by allocating modify hdr resources which is limited.
Doing it multiple times is redundant and wasting modify hdr resources
and if resources depleted the driver will fail offloading the rule.
Ignore redundant ct clear actions after the first one.
Fixes:
806401c20a0f ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Mon, 17 Jan 2022 13:00:30 +0000 (15:00 +0200)]
net/mlx5e: TC, Reject rules with forward and drop actions
Such rules are redundant but allowed and passed to the driver.
The driver does not support offloading such rules so return an error.
Fixes:
03a9d11e6eeb ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Tue, 4 Jan 2022 08:38:02 +0000 (10:38 +0200)]
net/mlx5e: TC, Reject rules with drop and modify hdr action
This kind of action is not supported by firmware and generates a
syndrome.
kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)
Fixes:
d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Mon, 31 Jan 2022 08:26:19 +0000 (10:26 +0200)]
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
For RX TLS device-offloaded packets, the HW spec guarantees checksum
validation for the offloaded packets, but does not define whether the
CQE.checksum field matches the original packet (ciphertext) or
the decrypted one (plaintext). This latitude allows architetctural
improvements between generations of chips, resulting in different decisions
regarding the value type of CQE.checksum.
Hence, for these packets, the device driver should not make use of this CQE
field. Here we block CHECKSUM_COMPLETE usage for RX TLS device-offloaded
packets, and use CHECKSUM_UNNECESSARY instead.
Value of the packet's tcp_hdr.csum is not modified by the HW, and it always
matches the original ciphertext.
Fixes:
1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Gal Pressman [Wed, 2 Feb 2022 14:07:21 +0000 (16:07 +0200)]
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
The ioctl EEPROM query wrongly returns success on read failures, fix
that by returning the appropriate error code.
Fixes:
bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Gottlieb [Mon, 24 Jan 2022 19:25:04 +0000 (21:25 +0200)]
net/mlx5: Fix possible deadlock on rule deletion
Add missing call to up_write_ref_node() which releases the semaphore
in case the FTE doesn't have destinations, such in drop rule case.
Fixes:
465e7baab6d9 ("net/mlx5: Fix deletion of duplicate rules")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Chris Mi [Tue, 14 Dec 2021 01:52:53 +0000 (03:52 +0200)]
net/mlx5: Fix tc max supported prio for nic mode
Only prio 1 is supported if firmware doesn't support ignore flow
level for nic mode. The offending commit removed the check wrongly.
Add it back.
Fixes:
9a99c8f1253a ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Ariel Levkovich [Fri, 28 Jan 2022 23:39:24 +0000 (01:39 +0200)]
net/mlx5: Fix wrong limitation of metadata match on ecpf
Match metadata support check returns false for ecpf device.
However, this support does exist for ecpf and therefore this
limitation should be removed to allow feature such as stacked
devices and internal port offloaded to be supported.
Fixes:
92ab1eb392c6 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maher Sanalla [Wed, 16 Feb 2022 09:01:04 +0000 (11:01 +0200)]
net/mlx5: Update log_max_qp value to be 17 at most
Currently, log_max_qp value is dependent on what FW reports as its max capability.
In reality, due to a bug, some FWs report a value greater than 17, even though they
don't support log_max_qp > 17.
This FW issue led the driver to exhaust memory on startup.
Thus, log_max_qp value is set to be no more than 17 regardless
of what FW reports, as it was before the cited commit.
Fixes:
f79a609ea6bf ("net/mlx5: Update log_max_qp value to FW max capability")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Wed, 29 Dec 2021 20:22:05 +0000 (22:22 +0200)]
net/mlx5: DR, Fix the threshold that defines when pool sync is initiated
When deciding whether to start syncing and actually free all the "hot"
ICM chunks, we need to consider the type of the ICM chunks that we're
dealing with. For instance, the amount of available ICM for MODIFY_ACTION
is significantly lower than the usual STE ICM, so the threshold should
account for that - otherwise we can deplete MODIFY_ACTION memory just by
creating and deleting the same modify header action in a continuous loop.
This patch replaces the hard-coded threshold with a dynamic value.
Fixes:
1c58651412bb ("net/mlx5: DR, ICM memory pools sync optimization")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 13 Jan 2022 12:52:48 +0000 (14:52 +0200)]
net/mlx5: DR, Don't allow match on IP w/o matching on full ethertype/ip_version
Currently SMFS allows adding rule with matching on src/dst IP w/o matching
on full ethertype or ip_version, which is not supported by HW.
This patch fixes this issue and adds the check as it is done in DMFS.
Fixes:
26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 11 Jan 2022 01:00:03 +0000 (03:00 +0200)]
net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fte
When adding a rule with 32 destinations, we hit the following out-of-band
access issue:
BUG: KASAN: slab-out-of-bounds in mlx5_cmd_dr_create_fte+0x18ee/0x1e70
This patch fixes the issue by both increasing the allocated buffers to
accommodate for the needed actions and by checking the number of actions
to prevent this issue when a rule with too many actions is provided.
Fixes:
1ffd498901c1 ("net/mlx5: DR, Increase supported num of actions to 32")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Thu, 23 Dec 2021 23:07:30 +0000 (01:07 +0200)]
net/mlx5: DR, Cache STE shadow memory
During rule insertion on each ICM memory chunk we also allocate shadow memory
used for management. This includes the hw_ste, dr_ste and miss list per entry.
Since the scale of these allocations is large we noticed a performance hiccup
that happens once malloc and free are stressed.
In extreme usecases when ~1M chunks are freed at once, it might take up to 40
seconds to complete this, up to the point the kernel sees this as self-detected
stall on CPU:
rcu: INFO: rcu_sched self-detected stall on CPU
To resolve this we will increase the reuse of shadow memory.
Doing this we see that a time in the aforementioned usecase dropped from ~40
seconds to ~8-10 seconds.
Fixes:
29cf8febd185 ("net/mlx5: DR, ICM pool memory allocator")
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Meir Lichtinger [Mon, 10 Jan 2022 08:14:41 +0000 (10:14 +0200)]
net/mlx5: Update the list of the PCI supported devices
Add the upcoming BlueField-4 and ConnectX-8 device IDs.
Fixes:
2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Meir Lichtinger <meirl@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Qiang Yu [Mon, 21 Feb 2022 09:53:56 +0000 (17:53 +0800)]
drm/amdgpu: check vm ready by amdgpu_vm->evicting flag
Workstation application ANSA/META v21.1.4 get this error dmesg when
running CI test suite provided by ANSA/META:
[drm:amdgpu_gem_va_ioctl [amdgpu]] *ERROR* Couldn't update BO_VA (-16)
This is caused by:
1. create a 256MB buffer in invisible VRAM
2. CPU map the buffer and access it causes vm_fault and try to move
it to visible VRAM
3. force visible VRAM space and traverse all VRAM bos to check if
evicting this bo is valuable
4. when checking a VM bo (in invisible VRAM), amdgpu_vm_evictable()
will set amdgpu_vm->evicting, but latter due to not in visible
VRAM, won't really evict it so not add it to amdgpu_vm->evicted
5. before next CS to clear the amdgpu_vm->evicting, user VM ops
ioctl will pass amdgpu_vm_ready() (check amdgpu_vm->evicted)
but fail in amdgpu_vm_bo_update_mapping() (check
amdgpu_vm->evicting) and get this error log
This error won't affect functionality as next CS will finish the
waiting VM ops. But we'd better clear the error log by checking
the amdgpu_vm->evicting flag in amdgpu_vm_ready() to stop calling
amdgpu_vm_bo_update_mapping() later.
Another reason is amdgpu_vm->evicted list holds all BOs (both
user buffer and page table), but only page table BOs' eviction
prevent VM ops. amdgpu_vm->evicting flag is set only for page
table BOs, so we should use evicting flag instead of evicted list
in amdgpu_vm_ready().
The side effect of this change is: previously blocked VM op (user
buffer in "evicted" list but no page table in it) gets done
immediately.
v2: update commit comments.
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Qiang Yu <qiang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Guchun Chen [Fri, 18 Feb 2022 05:05:26 +0000 (13:05 +0800)]
drm/amdgpu: bypass tiling flag check in virtual display case (v2)
vkms leverages common amdgpu framebuffer creation, and
also as it does not support FB modifier, there is no need
to check tiling flags when initing framebuffer when virtual
display is enabled.
This can fix below calltrace:
amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier
WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu]
v2: check adev->enable_virtual_display instead as vkms can be
enabled in bare metal as well.
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Fri, 18 Feb 2022 04:57:52 +0000 (12:57 +0800)]
Revert "drm/amdgpu: add modifiers in amdgpu_vkms_plane_init()"
This reverts commit
4046afcebfc3c8c0dd5666c2671b2c192b344f78.
No need to support modifier in virtual kms, otherwise, in SRIOV
mode, when lanuching X server, set crtc will fail due to mismatch
between primary plane modifier and framebuffer modifier.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chen Gong [Thu, 17 Feb 2022 07:29:41 +0000 (15:29 +0800)]
drm/amdgpu: do not enable asic reset for raven2
The GPU reset function of raven2 is not maintained or tested, so it should be
very unstable.
Now the amdgpu_asic_reset function is added to amdgpu_pmops_suspend, which
causes the S3 test of raven2 to fail, so the asic_reset of raven2 is ignored
here.
Fixes:
daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Signed-off-by: Chen Gong <curry.gong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Nicholas Kazlauskas [Tue, 25 Jan 2022 17:04:34 +0000 (12:04 -0500)]
drm/amd/display: Fix stream->link_enc unassigned during stream removal
[Why]
Found when running igt@kms_atomic.
Userspace attempts to do a TEST_COMMIT when 0 streams which calls
dc_remove_stream_from_ctx. This in turn calls link_enc_unassign
which ends up modifying stream->link = NULL directly, causing the
global link_enc to be removed preventing further link activity
and future link validation from passing.
[How]
We take care of link_enc unassignment at the start of
link_enc_cfg_link_encs_assign so this call is no longer necessary.
Fixes global state from being modified while unlocked.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Mario Limonciello [Tue, 1 Feb 2022 16:26:33 +0000 (10:26 -0600)]
drm/amd: Check if ASPM is enabled from PCIe subsystem
commit
0064b0ce85bb ("drm/amd/pm: enable ASPM by default") enabled ASPM
by default but a variety of hardware configurations it turns out that this
caused a regression.
* PPC64LE hardware does not support ASPM at a hardware level.
CONFIG_PCIEASPM is often disabled on these architectures.
* Some dGPUs on ALD platforms don't work with ASPM enabled and PCIe subsystem
disables it
Check with the PCIe subsystem to see that ASPM has been enabled
or not.
Fixes:
0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Link: https://wiki.raptorcs.com/w/images/a/ad/P9_PHB_version1.0_27July2018_pub.pdf
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1723
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1739
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1885
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1907
Tested-by: koba.ko@canonical.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Shreeya Patel [Wed, 16 Feb 2022 20:26:55 +0000 (01:56 +0530)]
gpio: Return EPROBE_DEFER if gc->to_irq is NULL
We are racing the registering of .to_irq when probing the
i2c driver. This results in random failure of touchscreen
devices.
Following explains the race condition better.
[gpio driver] gpio driver registers gpio chip
[gpio consumer] gpio is acquired
[gpio consumer] gpiod_to_irq() fails with -ENXIO
[gpio driver] gpio driver registers irqchip
gpiod_to_irq works at this point, but -ENXIO is fatal
We could see the following errors in dmesg logs when gc->to_irq is NULL
[2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ
[2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22
To avoid this situation, defer probing until to_irq is registered.
Returning -EPROBE_DEFER would be the first step towards avoiding
the failure of devices due to the race in registration of .to_irq.
Final solution to this issue would be to avoid using gc irq members
until they are fully initialized.
This issue has been reported many times in past and people have been
using workarounds like changing the pinctrl_amd to built-in instead
of loading it as a module or by adding a softdep for pinctrl_amd into
the config file.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209413
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Linus Torvalds [Wed, 23 Feb 2022 20:06:23 +0000 (12:06 -0800)]
Merge tag 'for-5.17/parisc-4' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc unaligned handler fixes from Helge Deller:
"Two patches which fix a few bugs in the unalignment handlers.
The fldd and fstd instructions weren't handled at all on 32-bit
kernels, the stw instruction didn't check for fault errors and the
fldw_l and ldw_m were handled wrongly as integer vs floating point
instructions.
Both patches are tagged for stable series"
* tag 'for-5.17/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/unaligned: Fix ldw() and stw() unalignment handlers
parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
Linus Torvalds [Wed, 23 Feb 2022 19:51:35 +0000 (11:51 -0800)]
Merge tag 'hwmon-for-v5.17-rc6' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix two old bugs and one new bug in the hwmon subsystem:
- In pmbus core, clear pmbus fault/warning status bits after read to
follow PMBus standard
- In hwmon core, handle failure to register sensor with thermal zone
correctly
- In ntc_thermal driver, use valid thermistor names for Samsung
thermistors"
* tag 'hwmon-for-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus) Clear pmbus fault/warning bits after read
hwmon: Handle failure to register sensor with thermal zone correctly
hwmon: (ntc_thermistor) Underscore Samsung thermistor
Linus Torvalds [Wed, 23 Feb 2022 19:33:12 +0000 (11:33 -0800)]
Merge tag 'slab-for-5.17-rc6' of git://git./linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Build fix (workaround) for clang.
- Fix a /proc/kcore based slabinfo script broken by struct slab changes
in 5.17-rc1.
* tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
tools/cgroup/slabinfo: update to work with struct slab
slab: remove __alloc_size attribute from __kmalloc_track_caller
Bart Van Assche [Tue, 15 Feb 2022 21:05:11 +0000 (13:05 -0800)]
RDMA/ib_srp: Fix a deadlock
Remove the flush_workqueue(system_long_wq) call since flushing
system_long_wq is deadlock-prone and since that call is redundant with a
preceding cancel_work_sync()
Link: https://lore.kernel.org/r/20220215210511.28303-3-bvanassche@acm.org
Fixes:
ef6c49d87c34 ("IB/srp: Eliminate state SRP_TARGET_DEAD")
Reported-by: syzbot+831661966588c802aae9@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Alex Deucher [Tue, 22 Feb 2022 16:08:01 +0000 (11:08 -0500)]
PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken
There are enough VBIOS escapes without the proper workaround that some
users still hit this. Microsoft never productized ATS on Windows so OEM
platforms that were Windows-only didn't always validate ATS.
The advantages of ATS are not worth it compared to the potential
instabilities on harvested boards. Disable ATS on all Navi10 and Navi14
boards.
Symptoms include:
amdgpu 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000]
[drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=6047, emitted seq=6049
amdgpu 0000:07:00.0: amdgpu: GPU reset begin!
amdgpu 0000:07:00.0: amdgpu: GPU reset succeeded, trying to resume
amdgpu 0000:07:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma0 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <sdma_v4_0> failed -110
amdgpu 0000:07:00.0: amdgpu: GPU reset(1) failed
Related commits:
e8946a53e2a6 ("PCI: Mark AMD Navi14 GPU ATS as broken")
a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms")
45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken")
5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken")
d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken")
9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken")
[bhelgaas: add symptoms and related commits]
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1760
Link: https://lore.kernel.org/r/20220222160801.841643-1-alexander.deucher@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Helge Deller [Fri, 18 Feb 2022 22:40:14 +0000 (23:40 +0100)]
parisc/unaligned: Fix ldw() and stw() unalignment handlers
Fix 3 bugs:
a) emulate_stw() doesn't return the error code value, so faulting
instructions are not reported and aborted.
b) Tell emulate_ldw() to handle fldw_l as floating point instruction
c) Tell emulate_ldw() to handle ldw_m as integer instruction
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Helge Deller [Fri, 18 Feb 2022 08:25:20 +0000 (09:25 +0100)]
parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
Usually the kernel provides fixup routines to emulate the fldd and fstd
floating-point instructions if they load or store 8-byte from/to a not
natuarally aligned memory location.
On a 32-bit kernel I noticed that those unaligned handlers didn't worked and
instead the application got a SEGV.
While checking the code I found two problems:
First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the
CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel.
This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation
of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd
instructions.
The second problem are two bugs in the 32-bit inline assembly code, where the
wrong registers where used. The calculation of the natural alignment used %2
(vall) instead of %3 (ior), and the first word was stored back to address %1
(valh) instead of %3 (ior).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Qu Wenruo [Tue, 22 Feb 2022 17:20:59 +0000 (18:20 +0100)]
btrfs: autodefrag: only scan one inode once
Although we have btrfs_requeue_inode_defrag(), for autodefrag we are
still just exhausting all inode_defrag items in the tree.
This means, it doesn't make much difference to requeue an inode_defrag,
other than scan the inode from the beginning till its end.
Change the behaviour to always scan from offset 0 of an inode, and till
the end.
By this we get the following benefit:
- Straight-forward code
- No more re-queue related check
- Fewer members in inode_defrag
We still keep the same btrfs_get_fs_root() and btrfs_iget() check for
each loop, and added extra should_auto_defrag() check per-loop.
Note: the patch needs to be backported and is intentionally written
to minimize the diff size, code will be cleaned up later.
CC: stable@vger.kernel.org # 5.16
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 11 Feb 2022 06:46:13 +0000 (14:46 +0800)]
btrfs: defrag: don't use merged extent map for their generation check
For extent maps, if they are not compressed extents and are adjacent by
logical addresses and file offsets, they can be merged into one larger
extent map.
Such merged extent map will have the higher generation of all the
original ones.
But this brings a problem for autodefrag, as it relies on accurate
extent_map::generation to determine if one extent should be defragged.
For merged extent maps, their higher generation can mark some older
extents to be defragged while the original extent map doesn't meet the
minimal generation threshold.
Thus this will cause extra IO.
So solve the problem, here we introduce a new flag, EXTENT_FLAG_MERGED,
to indicate if the extent map is merged from one or more ems.
And for autodefrag, if we find a merged extent map, and its generation
meets the generation requirement, we just don't use this one, and go
back to defrag_get_extent() to read extent maps from subvolume trees.
This could cause more read IO, but should result less defrag data write,
so in the long run it should be a win for autodefrag.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 11 Feb 2022 06:46:12 +0000 (14:46 +0800)]
btrfs: defrag: bring back the old file extent search behavior
For defrag, we don't really want to use btrfs_get_extent() to iterate
all extent maps of an inode.
The reasons are:
- btrfs_get_extent() can merge extent maps
And the result em has the higher generation of the two, causing defrag
to mark unnecessary part of such merged large extent map.
This in fact can result extra IO for autodefrag in v5.16+ kernels.
However this patch is not going to completely solve the problem, as
one can still using read() to trigger extent map reading, and got
them merged.
The completely solution for the extent map merging generation problem
will come as an standalone fix.
- btrfs_get_extent() caches the extent map result
Normally it's fine, but for defrag the target range may not get
another read/write for a long long time.
Such cache would only increase the memory usage.
- btrfs_get_extent() doesn't skip older extent map
Unlike the old find_new_extent() which uses btrfs_search_forward() to
skip the older subtree, thus it will pick up unnecessary extent maps.
This patch will fix the regression by introducing defrag_get_extent() to
replace the btrfs_get_extent() call.
This helper will:
- Not cache the file extent we found
It will search the file extent and manually convert it to em.
- Use btrfs_search_forward() to skip entire ranges which is modified in
the past
This should reduce the IO for autodefrag.
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes:
7b508037d4ca ("btrfs: defrag: use defrag_one_cluster() to implement btrfs_defrag_file()")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 28 Jan 2022 07:21:22 +0000 (15:21 +0800)]
btrfs: defrag: remove an ambiguous condition for rejection
From the very beginning of btrfs defrag, there is a check to reject
extents which meet both conditions:
- Physically adjacent
We may want to defrag physically adjacent extents to reduce the number
of extents or the size of subvolume tree.
- Larger than 128K
This may be there for compressed extents, but unfortunately 128K is
exactly the max capacity for compressed extents.
And the check is > 128K, thus it never rejects compressed extents.
Furthermore, the compressed extent capacity bug is fixed by previous
patch, there is no reason for that check anymore.
The original check has a very small ranges to reject (the target extent
size is > 128K, and default extent threshold is 256K), and for
compressed extent it doesn't work at all.
So it's better just to remove the rejection, and allow us to defrag
physically adjacent extents.
CC: stable@vger.kernel.org # 5.16
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 28 Jan 2022 07:21:21 +0000 (15:21 +0800)]
btrfs: defrag: don't defrag extents which are already at max capacity
[BUG]
For compressed extents, defrag ioctl will always try to defrag any
compressed extents, wasting not only IO but also CPU time to
compress/decompress:
mkfs.btrfs -f $DEV
mount -o compress $DEV $MNT
xfs_io -f -c "pwrite -S 0xab 0 128K" $MNT/foobar
sync
xfs_io -f -c "pwrite -S 0xcd 128K 128K" $MNT/foobar
sync
echo "=== before ==="
xfs_io -c "fiemap -v" $MNT/foobar
btrfs filesystem defrag $MNT/foobar
sync
echo "=== after ==="
xfs_io -c "fiemap -v" $MNT/foobar
Then it shows the 2 128K extents just get COW for no extra benefit, with
extra IO/CPU spent:
=== before ===
/mnt/btrfs/file1:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..255]: 26624..26879 256 0x8
1: [256..511]: 26632..26887 256 0x9
=== after ===
/mnt/btrfs/file1:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..255]: 26640..26895 256 0x8
1: [256..511]: 26648..26903 256 0x9
This affects not only v5.16 (after the defrag rework), but also v5.15
(before the defrag rework).
[CAUSE]
From the very beginning, btrfs defrag never checks if one extent is
already at its max capacity (128K for compressed extents, 128M
otherwise).
And the default extent size threshold is 256K, which is already beyond
the compressed extent max size.
This means, by default btrfs defrag ioctl will mark all compressed
extent which is not adjacent to a hole/preallocated range for defrag.
[FIX]
Introduce a helper to grab the maximum extent size, and then in
defrag_collect_targets() and defrag_check_next_extent(), reject extents
which are already at their max capacity.
Reported-by: Filipe Manana <fdmanana@suse.com>
CC: stable@vger.kernel.org # 5.16
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 28 Jan 2022 07:21:20 +0000 (15:21 +0800)]
btrfs: defrag: don't try to merge regular extents with preallocated extents
[BUG]
With older kernels (before v5.16), btrfs will defrag preallocated extents.
While with newer kernels (v5.16 and newer) btrfs will not defrag
preallocated extents, but it will defrag the extent just before the
preallocated extent, even it's just a single sector.
This can be exposed by the following small script:
mkfs.btrfs -f $dev > /dev/null
mount $dev $mnt
xfs_io -f -c "pwrite 0 4k" -c sync -c "falloc 4k 16K" $mnt/file
xfs_io -c "fiemap -v" $mnt/file
btrfs fi defrag $mnt/file
sync
xfs_io -c "fiemap -v" $mnt/file
The output looks like this on older kernels:
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 26624..26631 8 0x0
1: [8..39]: 26632..26663 32 0x801
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..39]: 26664..26703 40 0x1
Which defrags the single sector along with the preallocated extent, and
replace them with an regular extent into a new location (caused by data
COW).
This wastes most of the data IO just for the preallocated range.
On the other hand, v5.16 is slightly better:
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 26624..26631 8 0x0
1: [8..39]: 26632..26663 32 0x801
/mnt/btrfs/file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 26664..26671 8 0x0
1: [8..39]: 26632..26663 32 0x801
The preallocated range is not defragged, but the sector before it still
gets defragged, which has no need for it.
[CAUSE]
One of the function reused by the old and new behavior is
defrag_check_next_extent(), it will determine if we should defrag
current extent by checking the next one.
It only checks if the next extent is a hole or inlined, but it doesn't
check if it's preallocated.
On the other hand, out of the function, both old and new kernel will
reject preallocated extents.
Such inconsistent behavior causes above behavior.
[FIX]
- Also check if next extent is preallocated
If so, don't defrag current extent.
- Add comments for each branch why we reject the extent
This will reduce the IO caused by defrag ioctl and autodefrag.
CC: stable@vger.kernel.org # 5.16
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Varun Prakash [Sat, 22 Jan 2022 16:57:44 +0000 (22:27 +0530)]
nvme-tcp: send H2CData PDUs based on MAXH2CDATA
As per NVMe/TCP specification (revision 1.0a, section 3.6.2.3)
Maximum Host to Controller Data length (MAXH2CDATA): Specifies the
maximum number of PDU-Data bytes per H2CData PDU in bytes. This value
is a multiple of dwords and should be no less than 4,096.
Current code sets H2CData PDU data_length to r2t_length,
it does not check MAXH2CDATA value. Fix this by setting H2CData PDU
data_length to min(req->h2cdata_left, queue->maxh2cdata).
Also validate MAXH2CDATA value returned by target in ICResp PDU,
if it is not a multiple of dword or if it is less than 4096 return
-EINVAL from nvme_tcp_init_connection().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Christoph Hellwig [Wed, 16 Feb 2022 13:14:58 +0000 (14:14 +0100)]
nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info
Commit
e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
introduced the NVME_NS_READY flag, which nvme_path_is_disabled() uses
to check if a path can be used or not. We also need to set this flag
for devices that fail the ZNS feature validation and which are available
through passthrough devices only to that they can be used in multipathing
setups.
Fixes:
e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
Reported-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Christoph Hellwig [Wed, 16 Feb 2022 14:07:15 +0000 (15:07 +0100)]
nvme: don't return an error from nvme_configure_metadata
When a fabrics controller claims to support an invalidate metadata
configuration we already warn and disable metadata support. No need to
also return an error during revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Maxime Ripard [Thu, 3 Feb 2022 11:54:16 +0000 (12:54 +0100)]
drm/edid: Always set RGB444
In order to fill the drm_display_info structure each time an EDID is
read, the code currently will call drm_add_display_info with the parsed
EDID.
drm_add_display_info will then call drm_reset_display_info to reset all
the fields to 0, and then set them to the proper value depending on the
EDID.
In the color_formats case, we will thus report that we don't support any
color format, and then fill it back with RGB444 plus the additional
formats described in the EDID Feature Support byte.
However, since that byte only contains format-related bits since the 1.4
specification, this doesn't happen if the EDID is following an earlier
specification. In turn, it means that for one of these EDID, we end up
with color_formats set to 0.
The EDID 1.3 specification never really specifies what it means by RGB
exactly, but since both HDMI and DVI will use RGB444, it's fairly safe
to assume it's supposed to be RGB444.
Let's move the addition of RGB444 to color_formats earlier in
drm_add_display_info() so that it's always set for a digital display.
Fixes:
da05a5a71ad8 ("drm: parse color format support for digital displays")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203115416.1137308-1-maxime@cerno.tech
David S. Miller [Wed, 23 Feb 2022 12:50:19 +0000 (12:50 +0000)]
Merge branch 'ftgmac100-fixes'
Heyi Guo says:
====================
drivers/net/ftgmac100: fix occasional DHCP failure
This patch set is to fix the issues discussed in the mail thread:
https://lore.kernel.org/netdev/
51f5b7a7-330f-6b3c-253d-
10e45cdb6805@linux.alibaba.com/
and follows the advice from Andrew Lunn.
The first 2 patches refactors the code to enable adjust_link calling reset
function directly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heyi Guo [Wed, 23 Feb 2022 03:14:36 +0000 (11:14 +0800)]
drivers/net/ftgmac100: fix DHCP potential failure with systemd
DHCP failures were observed with systemd 247.6. The issue could be
reproduced by rebooting Aspeed 2600 and then running ifconfig ethX
down/up.
It is caused by below procedures in the driver:
1. ftgmac100_open() enables net interface and call phy_start()
2. When PHY is link up, it calls netif_carrier_on() and then
adjust_link callback
3. ftgmac100_adjust_link() will schedule the reset task
4. ftgmac100_reset_task() will then reset the MAC in another schedule
After step 2, systemd will be notified to send DHCP discover packet,
while the packet might be corrupted by MAC reset operation in step 4.
Call ftgmac100_reset() directly instead of scheduling task to fix the
issue.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heyi Guo [Wed, 23 Feb 2022 03:14:35 +0000 (11:14 +0800)]
drivers/net/ftgmac100: adjust code place for function call dependency
This is to prepare for ftgmac100_adjust_link() to call
ftgmac100_reset() directly. Only code places are changed.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>