OSDN Git Service
Markos Chandras [Tue, 11 Jun 2013 08:49:50 +0000 (08:49 +0000)]
lib/Kconfig.debug: Restrict FRAME_POINTER for MIPS
commit
25c87eae1725ed77a8b44d782a86abdc279b4ede upstream.
FAULT_INJECTION_STACKTRACE_FILTER selects FRAME_POINTER but
that symbol is not available for MIPS.
Fixes the following problem on a randconfig:
warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP &&
KMEMCHECK) selects FRAME_POINTER which has unmet direct dependencies
(DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || BLACKFIN ||
MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS)
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5441/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjørn Mork [Wed, 21 Nov 2012 08:54:48 +0000 (09:54 +0100)]
SCSI: megaraid_sas: fix memory leak if SGL has zero length entries
commit
7a6a731bd00ca90d0e250867c3b9c05b5ff0fa49 upstream.
commit
98cb7e44 ([SCSI] megaraid_sas: Sanity check user
supplied length before passing it to dma_alloc_coherent())
introduced a memory leak. Memory allocated for entries
following zero length SGL entries will not be freed.
Reference: http://bugs.debian.org/688198
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sreekanth Reddy [Fri, 28 Jun 2013 22:22:03 +0000 (03:52 +0530)]
SCSI: mpt3sas: fix for kernel panic when driver loads with HBA conected to non LUN 0 configured expander
commit
b65cfedf4560af65305bd7b3b9f26c02c6fb3660 upstream.
With some enclosures when LUN 0 is not created but LUN 1 or LUN X is created
then SCSI scan procedure calls target_alloc, slave_alloc call back functions
for LUN 0 and slave_destory() for same LUN 0.
In these kind of cases within slave_destroy, pointer to scsi_target in
_sas_device structure is set to NULL, following which when slave_alloc for LUN
1 is called then starget would not be set properly for this LUN. So,
scsi_target pointer pointing to NULL value would lead to a crash later in the
discovery procedure.
To solve this issue set the sas_device's scsi_target pointer to scsi_device's
scsi_target if it is NULL earlier in slave_alloc callback function.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sreekanth Reddy [Fri, 28 Jun 2013 22:23:02 +0000 (03:53 +0530)]
SCSI: mpt3sas: Infinite loops can occur if MPI2_IOCSTATUS_CONFIG_INVALID_PAGE is not returned
commit
14be49ac965ebd3f8561d57e01ddb22f93f9b454 upstream.
Infinite loop can occur if IOCStatus is not equal to
MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value in the while loops in functions
_scsih_search_responding_sas_devices,
_scsih_search_responding_raid_devices and
_scsih_search_responding_expanders
So, Instead of checking for MPI2_IOCSTATUS_CONFIG_INVALID_PAGE value,
in this patch code is modified to check for IOCStatus not equals to
MPI2_IOCSTATUS_SUCCESS to break the while loop.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Fri, 19 Jul 2013 10:28:25 +0000 (12:28 +0200)]
EDAC: Fix lockdep splat
commit
88d84ac97378c2f1d5fec9af1e8b7d9a662d6b00 upstream.
Fix the following:
BUG: key
ffff88043bdd0330 not in .data!
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0()
DEBUG_LOCKS_WARN_ON(1)
Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode
CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1
Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013
0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958
ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000
ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc
Call Trace:
dump_stack
warn_slowpath_common
warn_slowpath_fmt
lockdep_init_map
? trace_hardirqs_on_caller
? trace_hardirqs_on
debug_mutex_init
__mutex_init
bus_register
edac_create_sysfs_mci_device
edac_mc_add_mc
sbridge_probe
pci_device_probe
driver_probe_device
__driver_attach
? driver_probe_device
bus_for_each_dev
driver_attach
bus_add_driver
driver_register
__pci_register_driver
? 0xffffffffa0010fff
sbridge_init
? 0xffffffffa0010fff
do_one_initcall
load_module
? unset_module_init_ro_nx
SyS_init_module
tracesys
---[ end trace
d24a70b0d3ddf733 ]---
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0
EDAC sbridge: Driver loaded.
What happens is that bus_register needs a statically allocated lock_key
because the last is handed in to lockdep. However, struct mem_ctl_info
embeds struct bus_type (the whole struct, not a pointer to it) and the
whole thing gets dynamically allocated.
Fix this by using a statically allocated struct bus_type for the MC bus.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kent Overstreet [Fri, 12 Jul 2013 05:42:14 +0000 (22:42 -0700)]
bcache: Journal replay fix
commit
faa5673617656ee58369a3cfe4a312cfcdc59c81 upstream.
The journal replay code starts by finding something that looks like a
valid journal entry, then it does a binary search over the unchecked
region of the journal for the journal entries with the highest sequence
numbers.
Trouble is, the logic was wrong - journal_read_bucket() returns true if
it found journal entries we need, but if the range of journal entries
we're looking for loops around the end of the journal - in that case
journal_read_bucket() could return true when it hadn't found the highest
sequence number we'd seen yet, and in that case the binary search did
the wrong thing. Whoops.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kent Overstreet [Fri, 12 Jul 2013 02:43:21 +0000 (19:43 -0700)]
bcache: Fix GC_SECTORS_USED() calculation
commit
29ebf465b9050f241c4433a796a32e6c896a9dcd upstream.
Part of the job of garbage collection is to add up however many sectors
of live data it finds in each bucket, but that doesn't work very well if
it doesn't reset GC_SECTORS_USED() when it starts. Whoops.
This wouldn't have broken anything horribly, but allocation tries to
preferentially reclaim buckets that are mostly empty and that's not
gonna work with an incorrect GC_SECTORS_USED() value.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kent Overstreet [Thu, 11 Jul 2013 04:25:02 +0000 (21:25 -0700)]
bcache: Fix a sysfs splat on shutdown
commit
c9502ea4424b31728703d113fc6b30bfead14633 upstream.
If we stopped a bcache device when we were already detaching (or
something like that), bcache_device_unlink() would try to remove a
symlink from sysfs that was already gone because the bcache dev kobject
had already been removed from sysfs.
So keep track of whether we've removed stuff from sysfs.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kent Overstreet [Thu, 11 Jul 2013 04:03:25 +0000 (21:03 -0700)]
bcache: Shutdown fix
commit
5caa52afc5abd1396e4af720469abb5843a71eb8 upstream.
Stopping a cache set is supposed to make it stop attached backing
devices, but somewhere along the way that code got lost. Fixing this
mainly has the effect of fixing our reboot notifier.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kent Overstreet [Thu, 11 Jul 2013 01:44:40 +0000 (18:44 -0700)]
bcache: Advertise that flushes are supported
commit
54d12f2b4fd0f218590d1490b41a18d0e2328a9a upstream.
Whoops - bcache's flush/FUA was mostly correct, but flushes get filtered
out unless we say we support them...
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kent Overstreet [Thu, 11 Jul 2013 01:04:21 +0000 (18:04 -0700)]
bcache: Fix a dumb race
commit
6aa8f1a6ca41c49721d2de4e048d3da8d06411f9 upstream.
In the far-too-complicated closure code - closures can have destructors,
for probably dubious reasons; they get run after the closure is no
longer waiting on anything but before dropping the parent ref, intended
just for freeing whatever memory the closure is embedded in.
Trouble is, when remaining goes to 0 and we've got nothing more to run -
we also have to unlock the closure, setting remaining to -1. If there's
a destructor, that unlock isn't doing anything - nobody could be trying
to lock it if we're about to free it - but if the unlock _is needed...
that check for a destructor was racy. Argh.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Wed, 17 Jul 2013 12:53:53 +0000 (14:53 +0200)]
fuse: readdirplus: sanity checks
commit
a28ef45cbb1e7fadd5159deb17b02de15c6e4aaf upstream.
Add sanity checks before adding or updating an entry with data received
from readdirplus.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Wed, 17 Jul 2013 12:53:53 +0000 (14:53 +0200)]
fuse: readdirplus: fix instantiate
commit
2914941e3178d84a216fc4eb85292dfef3b6d628 upstream.
Fuse does instantiation slightly differently from NFS/CIFS which use
d_materialise_unique().
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niels de Vos [Wed, 17 Jul 2013 12:53:53 +0000 (14:53 +0200)]
fuse: readdirplus: fix dentry leak
commit
53ce9a3364de0723b27d861de93bfc882f7db050 upstream.
In case d_lookup() returns a dentry with d_inode == NULL, the dentry is not
returned with dput(). This results in triggering a BUG() in
shrink_dcache_for_umount_subtree():
BUG: Dentry ...{i=0,n=...} still in use (1) [unmount of fuse fuse]
[SzM: need to d_drop() as well]
Reported-by: Justin Clift <jclift@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Brian Foster <bfoster@redhat.com>
Tested-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ralf Baechle [Thu, 13 Jun 2013 00:45:53 +0000 (02:45 +0200)]
RAPIDIO: IDT_GEN2: Fix build error.
commit
27f62b9f294b7e2019c94c385abda43a0af6bb8b upstream.
CC drivers/rapidio/switches/idt_gen2.o
drivers/rapidio/switches/idt_gen2.c: In function ‘idtg2_show_errlog’:
drivers/rapidio/switches/idt_gen2.c:379:30: error: ‘PAGE_SIZE’ undeclared (first use in this function)
drivers/rapidio/switches/idt_gen2.c:379:30: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ralf Baechle [Wed, 12 Jun 2013 23:29:24 +0000 (01:29 +0200)]
MIPS: Oceton: Fix build error.
commit
39205750efa6d335fac4f9bcd32b49c7e71c12b7 upstream.
If CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB, CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION,
CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT and
CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT are all undefined:
arch/mips/cavium-octeon/setup.c: In function ‘prom_init’:
arch/mips/cavium-octeon/setup.c:715:12: error: unused variable ‘ebase’ [-Werror=unused-variable]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 18 Jul 2013 16:35:10 +0000 (09:35 -0700)]
vlan: fix a race in egress prio management
[ Upstream commit
3e3aac497513c669e1c62c71e1d552ea85c1d974 ]
egress_priority_map[] hash table updates are protected by rtnl,
and we never remove elements until device is dismantled.
We have to make sure that before inserting an new element in hash table,
all its fields are committed to memory or else another cpu could
find corrupt values and crash.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 18 Jul 2013 14:19:26 +0000 (07:19 -0700)]
vlan: mask vlan prio bits
[ Upstream commit
d4b812dea4a236f729526facf97df1a9d18e191c ]
In commit
48cc32d38a52d0b68f91a171a8d00531edc6a46e
("vlan: don't deliver frames for unknown vlans to protocols")
Florian made sure we set pkt_type to PACKET_OTHERHOST
if the vlan id is set and we could find a vlan device for this
particular id.
But we also have a problem if prio bits are set.
Steinar reported an issue on a router receiving IPv6 frames with a
vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device,
because skb->vlan_tci is set.
Forwarded frame is completely corrupted : We can see (8100:4000)
being inserted in the middle of IPv6 source address :
16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 >
9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64
0x0000: 0000 0029 8000 c7c3 7103 0001 a0ae e651
0x0010: 0000 0000 ccce 0b00 0000 0000 1011 1213
0x0020: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223
0x0030: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233
It seems we are not really ready to properly cope with this right now.
We can probably do better in future kernels :
vlan_get_ingress_priority() should be a netdev property instead of
a per vlan_dev one.
For stable kernels, lets clear vlan_tci to fix the bugs.
Reported-by: Steinar H. Gunderson <sesse@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Thu, 18 Jul 2013 02:55:16 +0000 (10:55 +0800)]
macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
[ Upstream commit
ece793fcfc417b3925844be88a6a6dc82ae8f7c6 ]
We try to linearize part of the skb when the number of iov is greater than
MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
network.
Solve this problem by calculate the pages needed for iov before trying to do
zerocopy and switch to use copy instead of zerocopy if it needs more than
MAX_SKB_FRAGS.
This is done through introducing a new helper to count the pages for iov, and
call uarg->callback() manually when switching from zerocopy to copy to notify
vhost.
We can do further optimization on top.
This bug were introduced from
b92946e2919134ebe2a4083e4302236295ea2a73
(macvtap: zerocopy: validate vectors before building skb).
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Thu, 18 Jul 2013 02:55:15 +0000 (10:55 +0800)]
tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
[ Upstream commit
885291761dba2bfe04df4c0f7bb75e4c920ab82e ]
We try to linearize part of the skb when the number of iov is greater than
MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than
one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest
network.
Solve this problem by calculate the pages needed for iov before trying to do
zerocopy and switch to use copy instead of zerocopy if it needs more than
MAX_SKB_FRAGS.
This is done through introducing a new helper to count the pages for iov, and
call uarg->callback() manually when switching from zerocopy to copy to notify
vhost.
We can do further optimization on top.
The bug were introduced from commit
0690899b4d4501b3505be069b9a687e68ccbe15b
(tun: experimental zero copy tx support)
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Valente [Tue, 16 Jul 2013 06:52:30 +0000 (08:52 +0200)]
pkt_sched: sch_qfq: remove a source of high packet delay/jitter
[ Upstream commit
87f40dd6ce7042caca0b3b557e8923127f51f902 ]
QFQ+ inherits from QFQ a design choice that may cause a high packet
delay/jitter and a severe short-term unfairness. As QFQ, QFQ+ uses a
special quantity, the system virtual time, to track the service
provided by the ideal system it approximates. When a packet is
dequeued, this quantity must be incremented by the size of the packet,
divided by the sum of the weights of the aggregates waiting to be
served. Tracking this sum correctly is a non-trivial task, because, to
preserve tight service guarantees, the decrement of this sum must be
delayed in a special way [1]: this sum can be decremented only after
that its value would decrease also in the ideal system approximated by
QFQ+. For efficiency, QFQ+ keeps track only of the 'instantaneous'
weight sum, increased and decreased immediately as the weight of an
aggregate changes, and as an aggregate is created or destroyed (which,
in its turn, happens as a consequence of some class being
created/destroyed/changed). However, to avoid the problems caused to
service guarantees by these immediate decreases, QFQ+ increments the
system virtual time using the maximum value allowed for the weight
sum, 2^10, in place of the dynamic, instantaneous value. The
instantaneous value of the weight sum is used only to check whether a
request of weight increase or a class creation can be satisfied.
Unfortunately, the problems caused by this choice are worse than the
temporary degradation of the service guarantees that may occur, when a
class is changed or destroyed, if the instantaneous value of the
weight sum was used to update the system virtual time. In fact, the
fraction of the link bandwidth guaranteed by QFQ+ to each aggregate is
equal to the ratio between the weight of the aggregate and the sum of
the weights of the competing aggregates. The packet delay guaranteed
to the aggregate is instead inversely proportional to the guaranteed
bandwidth. By using the maximum possible value, and not the actual
value of the weight sum, QFQ+ provides each aggregate with the worst
possible service guarantees, and not with service guarantees related
to the actual set of competing aggregates. To see the consequences of
this fact, consider the following simple example.
Suppose that only the following aggregates are backlogged, i.e., that
only the classes in the following aggregates have packets to transmit:
one aggregate with weight 10, say A, and ten aggregates with weight 1,
say B1, B2, ..., B10. In particular, suppose that these aggregates are
always backlogged. Given the weight distribution, the smoothest and
fairest service order would be:
A B1 A B2 A B3 A B4 A B5 A B6 A B7 A B8 A B9 A B10 A B1 A B2 ...
QFQ+ would provide exactly this optimal service if it used the actual
value for the weight sum instead of the maximum possible value, i.e.,
11 instead of 2^10. In contrast, since QFQ+ uses the latter value, it
serves aggregates as follows (easy to prove and to reproduce
experimentally):
A B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 A A A A A A A A A A B1 B2 ... B10 A A ...
By replacing 10 with N in the above example, and by increasing N, one
can increase at will the maximum packet delay and the jitter
experienced by the classes in aggregate A.
This patch addresses this issue by just using the above
'instantaneous' value of the weight sum, instead of the maximum
possible value, when updating the system virtual time. After the
instantaneous weight sum is decreased, QFQ+ may deviate from the ideal
service for a time interval in the order of the time to serve one
maximum-size packet for each backlogged class. The worst-case extent
of the deviation exhibited by QFQ+ during this time interval [1] is
basically the same as of the deviation described above (but, without
this patch, QFQ+ suffers from such a deviation all the time). Finally,
this patch modifies the comment to the function qfq_slot_insert, to
make it coherent with the fact that the weight sum used by QFQ+ can
now be lower than the maximum possible value.
[1] P. Valente, "Extending WF2Q+ to support a dynamic traffic mix",
Proceedings of AAA-IDEA'05, June 2005.
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haiyang Zhang [Wed, 17 Jul 2013 06:01:20 +0000 (23:01 -0700)]
hyperv: Fix the NETIF_F_SG flag setting in netvsc
[ Upstream commit
f45708209dc445bac0844f6ce86e315a2ffe8a29 ]
SG mode is not currently supported by netvsc, so remove this flag for now.
Otherwise, it will be unconditionally enabled by commit
ec5f0615642
"Kill link between CSUM and SG features"
Previously, the SG feature is disabled because CSUM is not set here.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sarveshwar Bandi [Tue, 16 Jul 2013 07:14:02 +0000 (12:44 +0530)]
be2net: Fix to avoid hardware workaround when not needed
[ Upstream commit
52fe29e4bb614367c108b717c6d7fe5953eb7af3 ]
Hardware workaround requesting hardware to skip vlan insertion is necessary
only when umc or qnq is enabled. Enabling this workaround in other scenarios
could cause controller to stall.
Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 16 Jul 2013 03:03:19 +0000 (20:03 -0700)]
ipv4: set transport header earlier
[ Upstream commit
21d1196a35f5686c4323e42a62fdb4b23b0ab4a3 ]
commit
45f00f99d6e ("ipv4: tcp: clean up tcp_v4_early_demux()") added a
performance regression for non GRO traffic, basically disabling
IP early demux.
IPv6 stack resets transport header in ip6_rcv() before calling
IP early demux in ip6_rcv_finish(), while IPv4 does this only in
ip_local_deliver_finish(), _after_ IP early demux.
GRO traffic happened to enable IP early demux because transport header
is also set in inet_gro_receive()
Instead of reverting the faulty commit, we can make IPv4/IPv6 behave the
same : transport_header should be set in ip_rcv() instead of
ip_local_deliver_finish()
ip_local_deliver_finish() can also use skb_network_header_len() which is
faster than ip_hdrlen()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neil Horman [Tue, 16 Jul 2013 14:49:41 +0000 (10:49 -0400)]
atl1e: unmap partially mapped skb on dma error and free skb
[ Upstream commit
584ec4355355ffac43571b02a314d43eb2f7fcbf ]
Ben Hutchings pointed out that my recent update to atl1e
in commit
352900b583b2852152a1e05ea0e8b579292e731e
("atl1e: fix dma mapping warnings") was missing a bit of code.
Specifically it reset the hardware tx ring to its origional state when
we hit a dma error, but didn't unmap any exiting mappings from the
operation. This patch fixes that up. It also remembers to free the
skb in the event that an error occurs, so we don't leak. Untested, as
I don't have hardware. I think its pretty straightforward, but please
review closely.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Jay Cliburn <jcliburn@gmail.com>
CC: Chris Snook <chris.snook@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neil Horman [Fri, 12 Jul 2013 14:58:48 +0000 (10:58 -0400)]
atl1e: fix dma mapping warnings
[ Upstream commit
352900b583b2852152a1e05ea0e8b579292e731e ]
Recently had this backtrace reported:
WARNING: at lib/dma-debug.c:937 check_unmap+0x47d/0x930()
Hardware name: System Product Name
ATL1E 0000:02:00.0: DMA-API: device driver failed to check map error[device
address=0x00000000cbfd1000] [size=90 bytes] [mapped as single]
Modules linked in: xt_conntrack nf_conntrack ebtable_filter ebtables
ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek iTCO_wdt
iTCO_vendor_support snd_hda_intel acpi_cpufreq mperf coretemp btrfs zlib_deflate
snd_hda_codec snd_hwdep microcode raid6_pq libcrc32c snd_seq usblp serio_raw xor
snd_seq_device joydev snd_pcm snd_page_alloc snd_timer snd lpc_ich i2c_i801
soundcore mfd_core atl1e asus_atk0110 ata_generic pata_acpi radeon i2c_algo_bit
drm_kms_helper ttm drm i2c_core pata_marvell uinput
Pid: 314, comm: systemd-journal Not tainted 3.9.0-0.rc6.git2.3.fc19.x86_64 #1
Call Trace:
<IRQ> [<
ffffffff81069106>] warn_slowpath_common+0x66/0x80
[<
ffffffff8106916c>] warn_slowpath_fmt+0x4c/0x50
[<
ffffffff8138151d>] check_unmap+0x47d/0x930
[<
ffffffff810ad048>] ? sched_clock_cpu+0xa8/0x100
[<
ffffffff81381a2f>] debug_dma_unmap_page+0x5f/0x70
[<
ffffffff8137ce30>] ? unmap_single+0x20/0x30
[<
ffffffffa01569a1>] atl1e_intr+0x3a1/0x5b0 [atl1e]
[<
ffffffff810d53fd>] ? trace_hardirqs_off+0xd/0x10
[<
ffffffff81119636>] handle_irq_event_percpu+0x56/0x390
[<
ffffffff811199ad>] handle_irq_event+0x3d/0x60
[<
ffffffff8111cb6a>] handle_fasteoi_irq+0x5a/0x100
[<
ffffffff8101c36f>] handle_irq+0xbf/0x150
[<
ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50
[<
ffffffff81073b10>] ? irq_enter+0x50/0xa0
[<
ffffffff8172738d>] do_IRQ+0x4d/0xc0
[<
ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50
[<
ffffffff8171c6b2>] common_interrupt+0x72/0x72
<EOI> [<
ffffffff810db5b2>] ? lock_release+0xc2/0x310
[<
ffffffff8109ea04>] lg_local_unlock_cpu+0x24/0x50
[<
ffffffff811dcb2f>] file_sb_list_del+0x3f/0x50
[<
ffffffff811dcb6d>] fput+0x2d/0xc0
[<
ffffffff811d8ea1>] filp_close+0x61/0x90
[<
ffffffff811fae4d>] __close_fd+0x8d/0x150
[<
ffffffff811d8ef0>] sys_close+0x20/0x50
[<
ffffffff81725699>] system_call_fastpath+0x16/0x1b
The usual straighforward failure to check for dma_mapping_error after a map
operation is completed.
This patch should fix it, the reporter wandered off after filing this bz:
https://bugzilla.redhat.com/show_bug.cgi?id=954170
and I don't have hardware to test, but the fix is pretty straightforward, so I
figured I'd post it for review.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Jay Cliburn <jcliburn@gmail.com>
CC: Chris Snook <chris.snook@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Fri, 12 Jul 2013 21:46:33 +0000 (23:46 +0200)]
ipv6: only static routes qualify for equal cost multipathing
[ Upstream commit
307f2fb95e9b96b3577916e73d92e104f8f26494 ]
Static routes in this case are non-expiring routes which did not get
configured by autoconf or by icmpv6 redirects.
To make sure we actually get an ecmp route while searching for the first
one in this fib6_node's leafs, also make sure it matches the ecmp route
assumptions.
v2:
a) Removed RTF_EXPIRE check in dst.from chain. The check of RTF_ADDRCONF
already ensures that this route, even if added again without
RTF_EXPIRES (in case of a RA announcement with infinite timeout),
does not cause the rt6i_nsiblings logic to go wrong if a later RA
updates the expiration time later.
v3:
a) Allow RTF_EXPIRES routes to enter the ecmp route set. We have to do so,
because an pmtu event could update the RTF_EXPIRES flag and we would
not count this route, if another route joins this set. We now filter
only for RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC, which are flags that
don't get changed after rt6_info construction.
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Duyck [Thu, 11 Jul 2013 20:12:22 +0000 (13:12 -0700)]
gre: Fix MTU sizing check for gretap tunnels
[ Upstream commit
8c91e162e058bb91b7766f26f4d5823a21941026 ]
This change fixes an MTU sizing issue seen with gretap tunnels when non-gso
packets are sent from the interface.
In my case I was able to reproduce the issue by simply sending a ping of
1421 bytes with the gretap interface created on a device with a standard
1500 mtu.
This fix is based on the fact that the tunnel mtu is already adjusted by
dev->hard_header_len so it would make sense that any packets being compared
against that mtu should also be adjusted by hard_header_len and the tunnel
header instead of just the tunnel header.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reported-by: Cong Wang <amwang@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dingtianhong [Thu, 11 Jul 2013 11:04:06 +0000 (19:04 +0800)]
ifb: fix oops when loading the ifb failed
[ Upstream commit
f2966cd5691058b8674a20766525bedeaea9cbcf ]
If __rtnl_link_register() return faild when loading the ifb, it will
take the wrong path and get oops, so fix it just like dummy.
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dingtianhong [Thu, 11 Jul 2013 11:04:02 +0000 (19:04 +0800)]
dummy: fix oops when loading the dummy failed
[ Upstream commit
2c8a01894a12665d8059fad8f0a293c98a264121 ]
We rename the dummy in modprobe.conf like this:
install dummy0 /sbin/modprobe -o dummy0 --ignore-install dummy
install dummy1 /sbin/modprobe -o dummy1 --ignore-install dummy
We got oops when we run the command:
modprobe dummy0
modprobe dummy1
------------[ cut here ]------------
[ 3302.187584] BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
[ 3302.195411] IP: [<
ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.201844] PGD
85c94a067 PUD
8517bd067 PMD 0
[ 3302.206305] Oops: 0002 [#1] SMP
[ 3302.299737] task:
ffff88105ccea300 ti:
ffff880eba4a0000 task.ti:
ffff880eba4a0000
[ 3302.307186] RIP: 0010:[<
ffffffff813fe62a>] [<
ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.316044] RSP: 0018:
ffff880eba4a1dd8 EFLAGS:
00010246
[ 3302.321332] RAX:
0000000000000000 RBX:
ffffffff81a9d738 RCX:
0000000000000002
[ 3302.328436] RDX:
0000000000000000 RSI:
ffffffffa04d602c RDI:
ffff880eba4a1dd8
[ 3302.335541] RBP:
ffff880eba4a1e18 R08:
dead000000200200 R09:
dead000000100100
[ 3302.342644] R10:
0000000000000080 R11:
0000000000000003 R12:
ffffffff81a9d788
[ 3302.349748] R13:
ffffffffa04d7020 R14:
ffffffff81a9d670 R15:
ffff880eba4a1dd8
[ 3302.364910] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 3302.370630] CR2:
0000000000000008 CR3:
000000085e15e000 CR4:
00000000000427e0
[ 3302.377734] DR0:
0000000000000003 DR1:
00000000000000b0 DR2:
0000000000000001
[ 3302.384838] DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
[ 3302.391940] Stack:
[ 3302.393944]
ffff880eba4a1dd8 ffff880eba4a1dd8 ffff880eba4a1e18 ffffffffa04d70c0
[ 3302.401350]
00000000ffffffef ffffffffa01a8000 0000000000000000 ffffffff816111c8
[ 3302.408758]
ffff880eba4a1e48 ffffffffa01a80be ffff880eba4a1e48 ffffffffa04d70c0
[ 3302.416164] Call Trace:
[ 3302.418605] [<
ffffffffa01a8000>] ? 0xffffffffa01a7fff
[ 3302.423727] [<
ffffffffa01a80be>] dummy_init_module+0xbe/0x1000 [dummy0]
[ 3302.430405] [<
ffffffffa01a8000>] ? 0xffffffffa01a7fff
[ 3302.435535] [<
ffffffff81000322>] do_one_initcall+0x152/0x1b0
[ 3302.441263] [<
ffffffff810ab24b>] do_init_module+0x7b/0x200
[ 3302.446824] [<
ffffffff810ad3d2>] load_module+0x4e2/0x530
[ 3302.452215] [<
ffffffff8127ae40>] ? ddebug_dyndbg_boot_param_cb+0x60/0x60
[ 3302.458979] [<
ffffffff810ad5f1>] SyS_init_module+0xd1/0x130
[ 3302.464627] [<
ffffffff814b9652>] system_call_fastpath+0x16/0x1b
[ 3302.490090] RIP [<
ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.496607] RSP <
ffff880eba4a1dd8>
[ 3302.500084] CR2:
0000000000000008
[ 3302.503466] ---[ end trace
8342d49cd49f78ed ]---
The reason is that when loading dummy, if __rtnl_link_register() return failed,
the init_module should return and avoid take the wrong path.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Thu, 11 Jul 2013 10:43:42 +0000 (12:43 +0200)]
ipv6: fix route selection if kernel is not compiled with CONFIG_IPV6_ROUTER_PREF
[ Upstream commit
afc154e978de1eb11c555bc8bcec1552f75ebc43 ]
This is a follow-up patch to
3630d40067a21d4dfbadc6002bb469ce26ac5d52
("ipv6: rt6_check_neigh should successfully verify neigh if no NUD
information are available").
Since the removal of rt->n in rt6_info we can end up with a dst ==
NULL in rt6_check_neigh. In case the kernel is not compiled with
CONFIG_IPV6_ROUTER_PREF we should also select a route with unkown
NUD state but we must not avoid doing round robin selection on routes
with the same target. So introduce and pass down a boolean ``do_rr'' to
indicate when we should update rt->rr_ptr. As soon as no route is valid
we do backtracking and do a lookup on a higher level in the fib trie.
v2:
a) Improved rt6_check_neigh logic (no need to create neighbour there)
and documented return values.
v3:
a) Introduce enum rt6_nud_state to get rid of the magic numbers
(thanks to David Miller).
b) Update and shorten commit message a bit to actualy reflect
the source.
Reported-by: Pierre Emeriaud <petrus.lt@gmail.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maarten Lankhorst [Thu, 11 Jul 2013 13:53:21 +0000 (15:53 +0200)]
alx: fix lockdep annotation
[ Upstream commit
a8798a5c77c9981e88caef1373a3310bf8aed219 ]
Move spin_lock_init to be called before the spinlocks are used, preventing a lockdep splat.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sasha Levin [Thu, 11 Jul 2013 17:16:54 +0000 (13:16 -0400)]
9p: fix off by one causing access violations and memory corruption
[ Upstream commit
110ecd69a9feea82a152bbf9b12aba57e6396883 ]
p9_release_pages() would attempt to dereference one value past the end of
pages[]. This would cause the following crashes:
[ 6293.171817] BUG: unable to handle kernel paging request at
ffff8807c96f3000
[ 6293.174146] IP: [<
ffffffff8412793b>] p9_release_pages+0x3b/0x60
[ 6293.176447] PGD
79c5067 PUD
82c1e3067 PMD
82c197067 PTE
80000007c96f3060
[ 6293.180060] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 6293.180060] Modules linked in:
[ 6293.180060] CPU: 62 PID: 174043 Comm: modprobe Tainted: G W 3.10.0-next-
20130710-sasha #3954
[ 6293.180060] task:
ffff8807b803b000 ti:
ffff880787dde000 task.ti:
ffff880787dde000
[ 6293.180060] RIP: 0010:[<
ffffffff8412793b>] [<
ffffffff8412793b>] p9_release_pages+0x3b/0x60
[ 6293.214316] RSP: 0000:
ffff880787ddfc28 EFLAGS:
00010202
[ 6293.214316] RAX:
0000000000000001 RBX:
ffff8807c96f2ff8 RCX:
0000000000000000
[ 6293.222017] RDX:
ffff8807b803b000 RSI:
0000000000000001 RDI:
ffffea001c7e3d40
[ 6293.222017] RBP:
ffff880787ddfc48 R08:
0000000000000000 R09:
0000000000000000
[ 6293.222017] R10:
0000000000000001 R11:
0000000000000000 R12:
0000000000000001
[ 6293.222017] R13:
0000000000000001 R14:
ffff8807cc50c070 R15:
ffff8807cc50c070
[ 6293.222017] FS:
00007f572641d700(0000) GS:
ffff8807f3600000(0000) knlGS:
0000000000000000
[ 6293.256784] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[ 6293.256784] CR2:
ffff8807c96f3000 CR3:
00000007c8e81000 CR4:
00000000000006e0
[ 6293.256784] Stack:
[ 6293.256784]
ffff880787ddfcc8 ffff880787ddfcc8 0000000000000000 ffff880787ddfcc8
[ 6293.256784]
ffff880787ddfd48 ffffffff84128be8 ffff880700000002 0000000000000001
[ 6293.256784]
ffff8807b803b000 ffff880787ddfce0 0000100000000000 0000000000000000
[ 6293.256784] Call Trace:
[ 6293.256784] [<
ffffffff84128be8>] p9_virtio_zc_request+0x598/0x630
[ 6293.256784] [<
ffffffff8115c610>] ? wake_up_bit+0x40/0x40
[ 6293.256784] [<
ffffffff841209b1>] p9_client_zc_rpc+0x111/0x3a0
[ 6293.256784] [<
ffffffff81174b78>] ? sched_clock_cpu+0x108/0x120
[ 6293.256784] [<
ffffffff84122a21>] p9_client_read+0xe1/0x2c0
[ 6293.256784] [<
ffffffff81708a90>] v9fs_file_read+0x90/0xc0
[ 6293.256784] [<
ffffffff812bd073>] vfs_read+0xc3/0x130
[ 6293.256784] [<
ffffffff811a78bd>] ? trace_hardirqs_on+0xd/0x10
[ 6293.256784] [<
ffffffff812bd5a2>] SyS_read+0x62/0xa0
[ 6293.256784] [<
ffffffff841a1a00>] tracesys+0xdd/0xe2
[ 6293.256784] Code: 66 90 48 89 fb 41 89 f5 48 8b 3f 48 85 ff 74 29 85 f6 74 25 45 31 e4 66 0f 1f 84 00 00 00 00 00 e8 eb 14 12 fd 41 ff c4 49 63 c4 <48> 8b 3c c3 48 85 ff 74 05 45 39 e5 75 e7 48 83 c4 08 5b 41 5c
[ 6293.256784] RIP [<
ffffffff8412793b>] p9_release_pages+0x3b/0x60
[ 6293.256784] RSP <
ffff880787ddfc28>
[ 6293.256784] CR2:
ffff8807c96f3000
[ 6293.256784] ---[ end trace
50822ee72cd360fc ]---
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Wed, 10 Jul 2013 21:00:57 +0000 (23:00 +0200)]
ipv6: in case of link failure remove route directly instead of letting it expire
[ Upstream commit
1eb4f758286884e7566627164bca4c4a16952a83 ]
We could end up expiring a route which is part of an ecmp route set. Doing
so would invalidate the rt->rt6i_nsiblings calculations and could provoke
the following panic:
[ 80.144667] ------------[ cut here ]------------
[ 80.145172] kernel BUG at net/ipv6/ip6_fib.c:733!
[ 80.145172] invalid opcode: 0000 [#1] SMP
[ 80.145172] Modules linked in: 8021q nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables
+snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer virtio_balloon snd soundcore i2c_piix4 i2c_core virtio_net virtio_blk
[ 80.145172] CPU: 1 PID: 786 Comm: ping6 Not tainted 3.10.0+ #118
[ 80.145172] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 80.145172] task:
ffff880117fa0000 ti:
ffff880118770000 task.ti:
ffff880118770000
[ 80.145172] RIP: 0010:[<
ffffffff815f3b5d>] [<
ffffffff815f3b5d>] fib6_add+0x75d/0x830
[ 80.145172] RSP: 0018:
ffff880118771798 EFLAGS:
00010202
[ 80.145172] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
ffff88011350e480
[ 80.145172] RDX:
ffff88011350e238 RSI:
0000000000000004 RDI:
ffff88011350f738
[ 80.145172] RBP:
ffff880118771848 R08:
ffff880117903280 R09:
0000000000000001
[ 80.145172] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff88011350f680
[ 80.145172] R13:
ffff880117903280 R14:
ffff880118771890 R15:
ffff88011350ef90
[ 80.145172] FS:
00007f02b5127740(0000) GS:
ffff88011fd00000(0000) knlGS:
0000000000000000
[ 80.145172] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[ 80.145172] CR2:
00007f981322a000 CR3:
00000001181b1000 CR4:
00000000000006e0
[ 80.145172] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 80.145172] DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
[ 80.145172] Stack:
[ 80.145172]
0000000000000001 ffff880100000000 ffff880100000000 ffff880117903280
[ 80.145172]
0000000000000000 ffff880119a4cf00 0000000000000400 00000000000007fa
[ 80.145172]
0000000000000000 0000000000000000 0000000000000000 ffff88011350f680
[ 80.145172] Call Trace:
[ 80.145172] [<
ffffffff815eeceb>] ? rt6_bind_peer+0x4b/0x90
[ 80.145172] [<
ffffffff815ed985>] __ip6_ins_rt+0x45/0x70
[ 80.145172] [<
ffffffff815eee35>] ip6_ins_rt+0x35/0x40
[ 80.145172] [<
ffffffff815ef1e4>] ip6_pol_route.isra.44+0x3a4/0x4b0
[ 80.145172] [<
ffffffff815ef34a>] ip6_pol_route_output+0x2a/0x30
[ 80.145172] [<
ffffffff81616077>] fib6_rule_action+0xd7/0x210
[ 80.145172] [<
ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30
[ 80.145172] [<
ffffffff81553026>] fib_rules_lookup+0xc6/0x140
[ 80.145172] [<
ffffffff81616374>] fib6_rule_lookup+0x44/0x80
[ 80.145172] [<
ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30
[ 80.145172] [<
ffffffff815edea3>] ip6_route_output+0x73/0xb0
[ 80.145172] [<
ffffffff815dfdf3>] ip6_dst_lookup_tail+0x2c3/0x2e0
[ 80.145172] [<
ffffffff813007b1>] ? list_del+0x11/0x40
[ 80.145172] [<
ffffffff81082a4c>] ? remove_wait_queue+0x3c/0x50
[ 80.145172] [<
ffffffff815dfe4d>] ip6_dst_lookup_flow+0x3d/0xa0
[ 80.145172] [<
ffffffff815fda77>] rawv6_sendmsg+0x267/0xc20
[ 80.145172] [<
ffffffff815a8a83>] inet_sendmsg+0x63/0xb0
[ 80.145172] [<
ffffffff8128eb93>] ? selinux_socket_sendmsg+0x23/0x30
[ 80.145172] [<
ffffffff815218d6>] sock_sendmsg+0xa6/0xd0
[ 80.145172] [<
ffffffff81524a68>] SYSC_sendto+0x128/0x180
[ 80.145172] [<
ffffffff8109825c>] ? update_curr+0xec/0x170
[ 80.145172] [<
ffffffff81041d09>] ? kvm_clock_get_cycles+0x9/0x10
[ 80.145172] [<
ffffffff810afd1e>] ? __getnstimeofday+0x3e/0xd0
[ 80.145172] [<
ffffffff8152509e>] SyS_sendto+0xe/0x10
[ 80.145172] [<
ffffffff8164efd9>] system_call_fastpath+0x16/0x1b
[ 80.145172] Code: fe ff ff 41 f6 45 2a 06 0f 85 ca fe ff ff 49 8b 7e 08 4c 89 ee e8 94 ef ff ff e9 b9 fe ff ff 48 8b 82 28 05 00 00 e9 01 ff ff ff <0f> 0b 49 8b 54 24 30 0d 00 00 40 00 89 83 14 01 00 00 48 89 53
[ 80.145172] RIP [<
ffffffff815f3b5d>] fib6_add+0x75d/0x830
[ 80.145172] RSP <
ffff880118771798>
[ 80.387413] ---[ end trace
02f20b7a8b81ed95 ]---
[ 80.390154] Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Wed, 10 Jul 2013 05:43:28 +0000 (13:43 +0800)]
macvtap: correctly linearize skb when zerocopy is used
[ Upstream commit
61d46bf979d5cd7c164709a80ad5676a35494aae ]
Userspace may produce vectors greater than MAX_SKB_FRAGS. When we try to
linearize parts of the skb to let the rest of iov to be fit in
the frags, we need count copylen into linear when calling macvtap_alloc_skb()
instead of partly counting it into data_len. Since this breaks
zerocopy_sg_from_iovec() since its inner counter assumes nr_frags should
be zero at beginning. This cause nr_frags to be increased wrongly without
setting the correct frags.
This bug were introduced from
b92946e2919134ebe2a4083e4302236295ea2a73
(macvtap: zerocopy: validate vectors before building skb).
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Wed, 10 Jul 2013 05:43:27 +0000 (13:43 +0800)]
tuntap: correctly linearize skb when zerocopy is used
[ Upstream commit
3dd5c3308e8b671e8e8882ba972f51cefbe9fd0d ]
Userspace may produce vectors greater than MAX_SKB_FRAGS. When we try to
linearize parts of the skb to let the rest of iov to be fit in
the frags, we need count copylen into linear when calling tun_alloc_skb()
instead of partly counting it into data_len. Since this breaks
zerocopy_sg_from_iovec() since its inner counter assumes nr_frags should
be zero at beginning. This cause nr_frags to be increased wrongly without
setting the correct frags.
This bug were introduced from
0690899b4d4501b3505be069b9a687e68ccbe15b
(tun: experimental zero copy tx support)
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dingtianhong [Wed, 10 Jul 2013 04:04:02 +0000 (12:04 +0800)]
ifb: fix rcu_sched self-detected stalls
[ Upstream commit
440d57bc5ff55ec1efb3efc9cbe9420b4bbdfefa ]
According to the commit
16b0dc29c1af9df341428f4c49ada4f626258082
(dummy: fix rcu_sched self-detected stalls)
Eric Dumazet fix the problem in dummy, but the ifb will occur the
same problem like the dummy modules.
Trying to "modprobe ifb numifbs=30000" triggers :
INFO: rcu_sched self-detected stall on CPU
After this splat, RTNL is locked and reboot is needed.
We must call cond_resched() to avoid this, even holding RTNL.
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Kleikamp [Mon, 1 Jul 2013 21:49:22 +0000 (16:49 -0500)]
sunvnet: vnet_port_remove must call unregister_netdev
[ Upstream commit
aabb9875d02559ab9b928cd6f259a5cc4c21a589 ]
The missing call to unregister_netdev() leaves the interface active
after the driver is unloaded by rmmod.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael S. Tsirkin [Tue, 25 Jun 2013 14:29:46 +0000 (17:29 +0300)]
vhost-net: fix use-after-free in vhost_net_flush
[ Upstream commit
c38e39c378f46f00ce922dd40a91043a9925c28d ]
vhost_net_ubuf_put_and_wait has a confusing name:
it will actually also free it's argument.
Thus since commit
1280c27f8e29acf4af2da914e80ec27c3dbd5c01
"vhost-net: flush outstanding DMAs on memory change"
vhost_net_flush tries to use the argument after passing it
to vhost_net_ubuf_put_and_wait, this results
in use after free.
To fix, don't free the argument in vhost_net_ubuf_put_and_wait,
add an new API for callers that want to free ubufs.
Acked-by: Asias He <asias@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael S. Tsirkin [Tue, 9 Jul 2013 05:13:04 +0000 (08:13 +0300)]
virtio_net: fix race in RX VQ processing
[ Upstream commit
cbdadbbf0c790f79350a8f36029208944c5487d0 ]
virtio net called virtqueue_enable_cq on RX path after napi_complete, so
with NAPI_STATE_SCHED clear - outside the implicit napi lock.
This violates the requirement to synchronize virtqueue_enable_cq wrt
virtqueue_add_buf. In particular, used event can move backwards,
causing us to lose interrupts.
In a debug build, this can trigger panic within START_USE.
Jason Wang reports that he can trigger the races artificially,
by adding udelay() in virtqueue_enable_cb() after virtio_mb().
However, we must call napi_complete to clear NAPI_STATE_SCHED before
polling the virtqueue for used buffers, otherwise napi_schedule_prep in
a callback will fail, causing us to lose RX events.
To fix, call virtqueue_enable_cb_prepare with NAPI_STATE_SCHED
set (under napi lock), later call virtqueue_poll with
NAPI_STATE_SCHED clear (outside the lock).
Reported-by: Jason Wang <jasowang@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael S. Tsirkin [Tue, 9 Jul 2013 10:19:18 +0000 (13:19 +0300)]
virtio: support unlocked queue poll
[ Upstream commit
cc229884d3f77ec3b1240e467e0236c3e0647c0c ]
This adds a way to check ring empty state after enable_cb outside any
locks. Will be used by virtio_net.
Note: there's room for more optimization: caller is likely to have a
memory barrier already, which means we might be able to get rid of a
barrier here. Deferring this optimization until we do some
benchmarking.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jongsung Kim [Tue, 9 Jul 2013 08:36:00 +0000 (17:36 +0900)]
net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
[ Upstream commit
01276ed2424eb78c95461545410923d5da154d31 ]
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Thu, 4 Jul 2013 22:48:46 +0000 (23:48 +0100)]
sfc: Fix memory leak when discarding scattered packets
[ Upstream commit
734d4e159b283a4ae4d007b7e7a91d84398ccb92 ]
Commit
2768935a4660 ('sfc: reuse pages to avoid DMA mapping/unmapping
costs') did not fully take account of DMA scattering which was
introduced immediately before. If a received packet is invalid and
must be discarded, we only drop a reference to the first buffer's
page, but we need to drop a reference for each buffer the packet
used.
I think this bug was missed partly because efx_recycle_rx_buffers()
was not renamed and so no longer does what its name says. It does not
change the state of buffers, but only prepares the underlying pages
for recycling. Rename it accordingly.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Wed, 3 Jul 2013 18:45:04 +0000 (20:45 +0200)]
ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
[ Upstream commit
3630d40067a21d4dfbadc6002bb469ce26ac5d52 ]
After the removal of rt->n we do not create a neighbour entry at route
insertion time (rt6_bind_neighbour is gone). As long as no neighbour is
created because of "useful traffic" we skip this routing entry because
rt6_check_neigh cannot pick up a valid neighbour (neigh == NULL) and
thus returns false.
This change was introduced by commit
887c95cc1da53f66a5890fdeab13414613010097 ("ipv6: Complete neighbour
entry removal from dst_entry.")
To quote RFC4191:
"If the host has no information about the router's reachability, then
the host assumes the router is reachable."
and also:
"A host MUST NOT probe a router's reachability in the absence of useful
traffic that the host would have sent to the router if it were reachable."
So, just assume the router is reachable and let's rt6_probe do the
rest. We don't need to create a neighbour on route insertion time.
If we don't compile with CONFIG_IPV6_ROUTER_PREF (RFC4191 support)
a neighbour is only valid if its nud_state is NUD_VALID. I did not find
any references that we should probe the router on route insertion time
via the other RFCs. So skip this route in that case.
v2:
a) use IS_ENABLED instead of #ifdefs (thanks to Sergei Shtylyov)
Reported-by: Pierre Emeriaud <petrus.lt@gmail.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Tue, 2 Jul 2013 06:04:05 +0000 (08:04 +0200)]
ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size
[ Upstream commit
75a493e60ac4bbe2e977e7129d6d8cbb0dd236be ]
If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track
of this when appending the second frame on a corked socket. This results
in the following splat:
[37598.993962] ------------[ cut here ]------------
[37598.994008] kernel BUG at net/core/skbuff.c:2064!
[37598.994008] invalid opcode: 0000 [#1] SMP
[37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat
+nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi
+scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm
[37598.994008] snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc
+dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video
[37598.994008] CPU 0
[37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG
[37598.994008] RIP: 0010:[<
ffffffff815443a5>] [<
ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008] RSP: 0018:
ffff88003670da18 EFLAGS:
00010202
[37598.994008] RAX:
ffff88018105c018 RBX:
0000000000000004 RCX:
00000000000006c0
[37598.994008] RDX:
ffff88018105a6c0 RSI:
ffff88018105a000 RDI:
ffff8801e1b0aa00
[37598.994008] RBP:
ffff88003670da78 R08:
0000000000000000 R09:
ffff88018105c040
[37598.994008] R10:
ffff8801e1b0aa00 R11:
0000000000000000 R12:
000000000000fff8
[37598.994008] R13:
00000000000004fc R14:
00000000ffff0504 R15:
0000000000000000
[37598.994008] FS:
00007f28eea59740(0000) GS:
ffff88023bc00000(0000) knlGS:
0000000000000000
[37598.994008] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[37598.994008] CR2:
0000003d935789e0 CR3:
00000000365cb000 CR4:
00000000000407f0
[37598.994008] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[37598.994008] DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
[37598.994008] Process t2 (pid: 27320, threadinfo
ffff88003670c000, task
ffff88022c162ee0)
[37598.994008] Stack:
[37598.994008]
ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8
[37598.994008]
ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200
[37598.994008]
0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4
[37598.994008] Call Trace:
[37598.994008] [<
ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0
[37598.994008] [<
ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0
[37598.994008] [<
ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40
[37598.994008] [<
ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10
[37598.994008] [<
ffffffff812a2845>] ? sock_has_perm+0x75/0x90
[37598.994008] [<
ffffffff815c3693>] inet_sendmsg+0x63/0xb0
[37598.994008] [<
ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30
[37598.994008] [<
ffffffff8153a450>] sock_sendmsg+0xb0/0xe0
[37598.994008] [<
ffffffff810135d1>] ? __switch_to+0x181/0x4a0
[37598.994008] [<
ffffffff8153d97d>] sys_sendto+0x12d/0x180
[37598.994008] [<
ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0
[37598.994008] [<
ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240
[37598.994008] [<
ffffffff8166a7e7>] tracesys+0xdd/0xe2
[37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48
[37598.994008] RIP [<
ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008] RSP <
ffff88003670da18>
[37599.007323] ---[ end trace
d69f6a17f8ac8eee ]---
While there, also check if path mtu discovery is activated for this
socket. The logic was adapted from ip6_append_data when first writing
on the corked socket.
This bug was introduced with commit
0c1833797a5a6ec23ea9261d979aa18078720b74 ("ipv6: fix incorrect ipsec
fragment").
v2:
a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE.
b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao
feng, thanks!).
c) Change mtu to unsigned int, else we get a warning about
non-matching types because of the min()-macro type-check.
Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Mon, 1 Jul 2013 18:21:30 +0000 (20:21 +0200)]
ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data
[ Upstream commit
8822b64a0fa64a5dd1dfcf837c5b0be83f8c05d1 ]
We accidentally call down to ip6_push_pending_frames when uncorking
pending AF_INET data on a ipv6 socket. This results in the following
splat (from Dave Jones):
skbuff: skb_under_panic: text:
ffffffff816765f6 len:48 put:40 head:
ffff88013deb6df0 data:
ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:126!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth
+netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c
CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37
task:
ffff8801f52c2520 ti:
ffff8801e6430000 task.ti:
ffff8801e6430000
RIP: 0010:[<
ffffffff816e759c>] [<
ffffffff816e759c>] skb_panic+0x63/0x65
RSP: 0018:
ffff8801e6431de8 EFLAGS:
00010282
RAX:
0000000000000086 RBX:
ffff8802353d3cc0 RCX:
0000000000000006
RDX:
0000000000003b90 RSI:
ffff8801f52c2ca0 RDI:
ffff8801f52c2520
RBP:
ffff8801e6431e08 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000001 R11:
0000000000000001 R12:
ffff88022ea0c800
R13:
ffff88022ea0cdf8 R14:
ffff8802353ecb40 R15:
ffffffff81cc7800
FS:
00007f5720a10740(0000) GS:
ffff880244c00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000005862000 CR3:
000000022843c000 CR4:
00000000001407e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000600
Stack:
ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4
ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6
ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0
Call Trace:
[<
ffffffff8159a9aa>] skb_push+0x3a/0x40
[<
ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0
[<
ffffffff810b756b>] ? mark_held_locks+0xbb/0x140
[<
ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0
[<
ffffffff81694660>] ? udplite_getfrag+0x20/0x20
[<
ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0
[<
ffffffff811cc5e7>] ? fget_light+0x387/0x4f0
[<
ffffffff816958a4>] udpv6_setsockopt+0x34/0x40
[<
ffffffff815949f4>] sock_common_setsockopt+0x14/0x20
[<
ffffffff81593c31>] SyS_setsockopt+0x71/0xd0
[<
ffffffff816f5d54>] tracesys+0xdd/0xe2
Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55
RIP [<
ffffffff816e759c>] skb_panic+0x63/0x65
RSP <
ffff8801e6431de8>
This patch adds a check if the pending data is of address family AF_INET
and directly calls udp_push_ending_frames from udp_v6_push_pending_frames
if that is the case.
This bug was found by Dave Jones with trinity.
(Also move the initialization of fl6 below the AF_INET check, even if
not strictly necessary.)
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Dave Jones <davej@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Tue, 2 Jul 2013 06:49:34 +0000 (14:49 +0800)]
ipip: fix a regression in ioctl
[ Upstream commit
3b7b514f44bff05d26a6499c4d4fac2a83938e6e ]
This is a regression introduced by
commit
fd58156e456d9f68fe0448 (IPIP: Use ip-tunneling code.)
Similar to GRE tunnel, previously we only check the parameters
for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the
check is moved for all commands.
So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL.
Also, the check for i_key, o_key etc. is suspicious too,
which did not exist before, reset them before passing
to ip_tunnel_ioctl().
Signed-off-by: Cong Wang <amwang@redhat.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Tue, 2 Jul 2013 01:02:07 +0000 (09:02 +0800)]
l2tp: add missing .owner to struct pppox_proto
[ Upstream commit
e1558a93b61962710733dc8c11a2bc765607f1cd ]
Add missing .owner of struct pppox_proto. This prevents the
module from being removed from underneath its users.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pravin B Shelar [Tue, 2 Jul 2013 17:57:33 +0000 (10:57 -0700)]
ip_tunnels: Use skb-len to PMTU check.
[ Upstream commit
23a3647bc4f93bac3776c66dc2c7f7f68b3cd662 ]
In path mtu check, ip header total length works for gre device
but not for gre-tap device. Use skb len which is consistent
for all tunneling types. This is old bug in gre.
This also fixes mtu calculation bug introduced by
commit
c54419321455631079c7d (GRE: Refactor GRE tunneling code).
Reported-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amerigo Wang [Sat, 29 Jun 2013 13:30:49 +0000 (21:30 +0800)]
ipv6,mcast: always hold idev->lock before mca_lock
[ Upstream commit
8965779d2c0e6ab246c82a405236b1fb2adae6b2, with
some bits from commit
b7b1bfce0bb68bd8f6e62a28295922785cc63781
("ipv6: split duplicate address detection and router solicitation timer")
to get the __ipv6_get_lladdr() used by this patch. ]
dingtianhong reported the following deadlock detected by lockdep:
======================================================
[ INFO: possible circular locking dependency detected ]
3.4.24.05-0.1-default #1 Not tainted
-------------------------------------------------------
ksoftirqd/0/3 is trying to acquire lock:
(&ndev->lock){+.+...}, at: [<
ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120
but task is already holding lock:
(&mc->mca_lock){+.+...}, at: [<
ffffffff8149d130>] mld_send_report+0x40/0x150
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&mc->mca_lock){+.+...}:
[<
ffffffff810a8027>] validate_chain+0x637/0x730
[<
ffffffff810a8417>] __lock_acquire+0x2f7/0x500
[<
ffffffff810a8734>] lock_acquire+0x114/0x150
[<
ffffffff814f691a>] rt_spin_lock+0x4a/0x60
[<
ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120
[<
ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60
[<
ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80
[<
ffffffff81483175>] addrconf_notify+0x3d5/0x4b0
[<
ffffffff814fae3f>] notifier_call_chain+0x3f/0x80
[<
ffffffff81073471>] raw_notifier_call_chain+0x11/0x20
[<
ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60
[<
ffffffff813d92d4>] __dev_notify_flags+0x34/0x80
[<
ffffffff813d9360>] dev_change_flags+0x40/0x70
[<
ffffffff813ea627>] do_setlink+0x237/0x8a0
[<
ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600
[<
ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310
[<
ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0
[<
ffffffff813eb357>] rtnetlink_rcv+0x27/0x40
[<
ffffffff81403e20>] netlink_unicast+0x140/0x180
[<
ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380
[<
ffffffff813c4252>] sock_sendmsg+0x112/0x130
[<
ffffffff813c537e>] __sys_sendmsg+0x44e/0x460
[<
ffffffff813c5544>] sys_sendmsg+0x44/0x70
[<
ffffffff814feab9>] system_call_fastpath+0x16/0x1b
-> #0 (&ndev->lock){+.+...}:
[<
ffffffff810a798e>] check_prev_add+0x3de/0x440
[<
ffffffff810a8027>] validate_chain+0x637/0x730
[<
ffffffff810a8417>] __lock_acquire+0x2f7/0x500
[<
ffffffff810a8734>] lock_acquire+0x114/0x150
[<
ffffffff814f6c82>] rt_read_lock+0x42/0x60
[<
ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120
[<
ffffffff8149b036>] mld_newpack+0xb6/0x160
[<
ffffffff8149b18b>] add_grhead+0xab/0xc0
[<
ffffffff8149d03b>] add_grec+0x3ab/0x460
[<
ffffffff8149d14a>] mld_send_report+0x5a/0x150
[<
ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0
[<
ffffffff8105705a>] call_timer_fn+0xca/0x1d0
[<
ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0
[<
ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0
[<
ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0
[<
ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210
[<
ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0
[<
ffffffff8106c7de>] kthread+0xae/0xc0
[<
ffffffff814fff74>] kernel_thread_helper+0x4/0x10
actually we can just hold idev->lock before taking pmc->mca_lock,
and avoid taking idev->lock again when iterating idev->addr_list,
since the upper callers of mld_newpack() already take
read_lock_bh(&idev->lock).
Reported-by: dingtianhong <dingtianhong@huawei.com>
Cc: dingtianhong <dingtianhong@huawei.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Ding Tianhong <dingtianhong@huawei.com>
Tested-by: Chen Weilong <chenweilong@huawei.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Sat, 29 Jun 2013 05:00:57 +0000 (13:00 +0800)]
vti: remove duplicated code to fix a memory leak
[ Upstream commit
ab6c7a0a43c2eaafa57583822b619b22637b49c7 ]
vti module allocates dev->tstats twice: in vti_fb_tunnel_init()
and in vti_tunnel_init(), this lead to a memory leak of
dev->tstats.
Just remove the duplicated operations in vti_fb_tunnel_init().
(candidate for -stable)
Signed-off-by: Cong Wang <amwang@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Saurabh Mohan <saurabh.mohan@vyatta.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Sat, 29 Jun 2013 04:02:59 +0000 (12:02 +0800)]
gre: fix a regression in ioctl
[ Upstream commit
6c734fb8592f6768170e48e7102cb2f0a1bb9759 ]
When testing GRE tunnel, I got:
# ip tunnel show
get tunnel gre0 failed: Invalid argument
get tunnel gre1 failed: Invalid argument
This is a regression introduced by commit
c54419321455631079c7d
("GRE: Refactor GRE tunneling code.") because previously we
only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL,
after that commit, the check is moved for all commands.
So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL.
After this patch I got:
# ip tunnel show
gre0: gre/ip remote any local any ttl inherit nopmtudisc
gre1: gre/ip remote 192.168.122.101 local 192.168.122.45 ttl inherit
Signed-off-by: Cong Wang <amwang@redhat.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changli Gao [Fri, 28 Jun 2013 16:15:51 +0000 (00:15 +0800)]
net: Swap ver and type in pppoe_hdr
[ Upstream commit
b1a5a34bd0b8767ea689e68f8ea513e9710b671e ]
Ver and type in pppoe_hdr should be swapped as defined by RFC2516
section-4.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Jones [Fri, 28 Jun 2013 16:13:52 +0000 (12:13 -0400)]
x25: Fix broken locking in ioctl error paths.
[ Upstream commit
4ccb93ce7439b63c31bc7597bfffd13567fa483d ]
Two of the x25 ioctl cases have error paths that break out of the function without
unlocking the socket, leading to this warning:
================================================
[ BUG: lock held when returning to user space! ]
3.10.0-rc7+ #36 Not tainted
------------------------------------------------
trinity-child2/31407 is leaving the kernel with locks still held!
1 lock held by trinity-child2/31407:
#0: (sk_lock-AF_X25){+.+.+.}, at: [<
ffffffffa024b6da>] x25_ioctl+0x8a/0x740 [x25]
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 28 Jun 2013 09:37:42 +0000 (02:37 -0700)]
neighbour: fix a race in neigh_destroy()
[ Upstream commit
c9ab4d85de222f3390c67aedc9c18a50e767531e ]
There is a race in neighbour code, because neigh_destroy() uses
skb_queue_purge(&neigh->arp_queue) without holding neighbour lock,
while other parts of the code assume neighbour rwlock is what
protects arp_queue
Convert all skb_queue_purge() calls to the __skb_queue_purge() variant
Use __skb_queue_head_init() instead of skb_queue_head_init()
to make clear we do not use arp_queue.lock
And hold neigh->lock in neigh_destroy() to close the race.
Reported-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Frederic Sowa [Thu, 27 Jun 2013 20:46:04 +0000 (22:46 +0200)]
ipv6: only apply anti-spoofing checks to not-pointopoint tunnels
[ Upstream commit
5c29fb12e8fb8a8105ea048cb160fd79a85a52bb ]
Because of commit
218774dc341f219bfcf940304a081b121a0e8099 ("ipv6: add
anti-spoofing checks for 6to4 and 6rd") the sit driver dropped packets
for 2002::/16 destinations and sources even when configured to work as a
tunnel with fixed endpoint. We may only apply the 6rd/6to4 anti-spoofing
checks if the device is not in pointopoint mode.
This was an oversight from me in the above commit, sorry. Thanks to
Roman Mamedov for reporting this!
Reported-by: Roman Mamedov <rm@romanrm.ru>
Cc: David Miller <davem@davemloft.net>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olivier DANET [Wed, 10 Jul 2013 20:56:10 +0000 (13:56 -0700)]
sparc32: vm_area_struct access for old Sun SPARCs.
upstream commit
961246b4ed8da3bcf4ee1eb9147f341013553e3c.
Commit
e4c6bfd2d79d063017ab19a18915f0bc759f32d9 ("mm: rearrange
vm_area_struct for fewer cache misses") changed the layout of the
vm_area_struct structure, it broke several SPARC32 assembly routines
which used numerical constants for accessing the vm_mm field.
This patch defines the VMA_VM_MM constant to replace the immediate values.
Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 28 Jun 2013 14:04:02 +0000 (16:04 +0200)]
writeback: Fix periodic writeback after fs mount
commit
a5faeaf9109578e65e1a32e2a3e76c8b47e7dcb6 upstream.
Code in blkdev.c moves a device inode to default_backing_dev_info when
the last reference to the device is put and moves the device inode back
to its bdi when the first reference is acquired. This includes moving to
wb.b_dirty list if the device inode is dirty. The code however doesn't
setup timer to wake corresponding flusher thread and while wb.b_dirty
list is non-empty __mark_inode_dirty() will not set it up either. Thus
periodic writeback is effectively disabled until a sync(2) call which can
lead to unexpected data loss in case of crash or power failure.
Fix the problem by setting up a timer for periodic writeback in case we
add the first dirty inode to wb.b_dirty list in bdev_inode_switch_bdi().
Reported-by: Bert De Jonghe <Bert.DeJonghe@amplidata.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 25 Jul 2013 22:16:45 +0000 (15:16 -0700)]
Linux 3.10.3
Steven Rostedt (Red Hat) [Tue, 2 Jul 2013 19:30:53 +0000 (15:30 -0400)]
tracing: Add trace_array_get/put() to event handling
commit
8e2e2fa47129532a30cff6c25a47078dc97d9260 upstream.
Commit
a695cb58162 "tracing: Prevent deleting instances when they are being read"
tried to fix a race between deleting a trace instance and reading contents
of a trace file. But it wasn't good enough. The following could crash the kernel:
# cd /sys/kernel/debug/tracing/instances
# ( while :; do mkdir foo; rmdir foo; done ) &
# ( while :; do echo 1 > foo/events/sched/sched_switch 2> /dev/null; done ) &
Luckily this can only be done by root user, but it should be fixed regardless.
The problem is that a delete of the file can happen after the write to the event
is opened, but before the enabling happens.
The solution is to make sure the trace_array is available before succeeding in
opening for write, and incerment the ref counter while opened.
Now the instance can be deleted when the events are writing to the buffer,
but the deletion of the instance will disable all events before the instance
is actually deleted.
Reported-by: Alexander Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Red Hat) [Tue, 2 Jul 2013 18:48:23 +0000 (14:48 -0400)]
tracing: Fix race between deleting buffer and setting events
commit
2a6c24afab70dbcfee49f4c76e1511eec1a3298b upstream.
While analyzing the code, I discovered that there's a potential race between
deleting a trace instance and setting events. There are a few races that can
occur if events are being traced as the buffer is being deleted. Mostly the
problem comes with freeing the descriptor used by the trace event callback.
To prevent problems like this, the events are disabled before the buffer is
deleted. The problem with the current solution is that the event_mutex is let
go between disabling the events and freeing the files, which means that the events
could be enabled again while the freeing takes place.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Red Hat) [Tue, 2 Jul 2013 03:34:22 +0000 (23:34 -0400)]
tracing: Get trace_array ref counts when accessing trace files
commit
7b85af63034818e43aee6c1d7bf1c7c6796a9073 upstream.
When a trace file is opened that may access a trace array, it must
increment its ref count to prevent it from being deleted.
Reported-by: Alexander Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Red Hat) [Tue, 2 Jul 2013 02:50:29 +0000 (22:50 -0400)]
tracing: Add trace_array_get/put() to handle instance refs better
commit
ff451961a8b2a17667a7bfa39c86fb9b351445db upstream.
Commit
a695cb58162 "tracing: Prevent deleting instances when they are being read"
tried to fix a race between deleting a trace instance and reading contents
of a trace file. But it wasn't good enough. The following could crash the kernel:
# cd /sys/kernel/debug/tracing/instances
# ( while :; do mkdir foo; rmdir foo; done ) &
# ( while :; do cat foo/trace &> /dev/null; done ) &
Luckily this can only be done by root user, but it should be fixed regardless.
The problem is that a delete of the file can happen after the reader starts
to open the file but before it grabs the trace_types_mutex.
The solution is to validate the trace array before using it. If the trace
array does not exist in the list of trace arrays, then it returns -ENODEV.
There's a possibility that a trace_array could be deleted and a new one
created and the open would open its file instead. But that is very minor as
it will just return the data of the new trace array, it may confuse the user
but it will not crash the system. As this can only be done by root anyway,
the race will only occur if root is deleting what its trying to read at
the same time.
Reported-by: Alexander Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Z Lam [Tue, 2 Jul 2013 02:37:54 +0000 (19:37 -0700)]
tracing: Protect ftrace_trace_arrays list in trace_events.c
commit
a82274151af2b075163e3c42c828529dee311487 upstream.
There are multiple places where the ftrace_trace_arrays list is accessed in
trace_events.c without the trace_types_lock held.
Link: http://lkml.kernel.org/r/1372732674-22726-1-git-send-email-azl@google.com
Signed-off-by: Alexander Z Lam <azl@google.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Z Lam [Mon, 1 Jul 2013 22:31:24 +0000 (15:31 -0700)]
tracing: Make trace_marker use the correct per-instance buffer
commit
2d71619c59fac95a5415a326162fa046161b938c upstream.
The trace_marker file was present for each new instance created, but it
added the trace mark to the global trace buffer instead of to
the instance's buffer.
Link: http://lkml.kernel.org/r/1372717885-4543-2-git-send-email-azl@google.com
Signed-off-by: Alexander Z Lam <azl@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhangwei(Jovi) [Wed, 10 Apr 2013 03:26:23 +0000 (11:26 +0800)]
tracing: Fix irqs-off tag display in syscall tracing
commit
11034ae9c20f4057a6127fc965906417978e69b2 upstream.
All syscall tracing irqs-off tags are wrong, the syscall enter entry doesn't
disable irqs.
[root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event
[root@jovi tracing]# cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 13/13 #P:2
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
irqbalance-513 [000] d... 56115.496766: sys_open(filename:
804e1a6, flags: 0, mode: 1b6)
irqbalance-513 [000] d... 56115.497008: sys_open(filename:
804e1bb, flags: 0, mode: 1b6)
sendmail-771 [000] d... 56115.827982: sys_open(filename:
b770e6d1, flags: 0, mode: 1b6)
The reason is syscall tracing doesn't record irq_flags into buffer.
The proper display is:
[root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event
[root@jovi tracing]# cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 14/14 #P:2
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
irqbalance-514 [001] .... 46.213921: sys_open(filename:
804e1a6, flags: 0, mode: 1b6)
irqbalance-514 [001] .... 46.214160: sys_open(filename:
804e1bb, flags: 0, mode: 1b6)
<...>-920 [001] .... 47.307260: sys_open(filename:
4e82a0c5, flags: 80000, mode: 0)
Link: http://lkml.kernel.org/r/1365564393-10972-3-git-send-email-jovi.zhangwei@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt [Thu, 27 Jun 2013 14:58:31 +0000 (10:58 -0400)]
tracing: Failed to create system directory
commit
6e94a780374ed31b280f939d4757e8d7858dff16 upstream.
Running the following:
# cd /sys/kernel/debug/tracing
# echo p:i do_sys_open > kprobe_events
# echo p:j schedule >> kprobe_events
# cat kprobe_events
p:kprobes/i do_sys_open
p:kprobes/j schedule
# echo p:i do_sys_open >> kprobe_events
# cat kprobe_events
p:kprobes/j schedule
p:kprobes/i do_sys_open
# ls /sys/kernel/debug/tracing/events/kprobes/
enable filter j
Notice that the 'i' is missing from the kprobes directory.
The console produces:
"Failed to create system directory kprobes"
This is because kprobes passes in a allocated name for the system
and the ftrace event subsystem saves off that name instead of creating
a duplicate for it. But the kprobes may free the system name making
the pointer to it invalid.
This bug was introduced by
92edca073c37 "tracing: Use direct field, type
and system names" which switched from using kstrdup() on the system name
in favor of just keeping apointer to it, as the internal ftrace event
system names are static and exist for the life of the computer being booted.
Instead of reverting back to duplicating system names again, we can use
core_kernel_data() to determine if the passed in name was allocated or
static. Then use the MSB of the ref_count to be a flag to keep track if
the name was allocated or not. Then we can still save from having to duplicate
strings that will always exist, but still copy the ones that may be freed.
Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com>
Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Fri, 12 Jul 2013 09:08:33 +0000 (11:08 +0200)]
perf: Fix perf_lock_task_context() vs RCU
commit
058ebd0eba3aff16b144eabf4510ed9510e1416e upstream.
Jiri managed to trigger this warning:
[] ======================================================
[] [ INFO: possible circular locking dependency detected ]
[] 3.10.0+ #228 Tainted: G W
[] -------------------------------------------------------
[] p/6613 is trying to acquire lock:
[] (rcu_node_0){..-...}, at: [<
ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250
[]
[] but task is already holding lock:
[] (&ctx->lock){-.-...}, at: [<
ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0
[]
[] which lock already depends on the new lock.
[]
[] the existing dependency chain (in reverse order) is:
[]
[] -> #4 (&ctx->lock){-.-...}:
[] -> #3 (&rq->lock){-.-.-.}:
[] -> #2 (&p->pi_lock){-.-.-.}:
[] -> #1 (&rnp->nocb_gp_wq[1]){......}:
[] -> #0 (rcu_node_0){..-...}:
Paul was quick to explain that due to preemptible RCU we cannot call
rcu_read_unlock() while holding scheduler (or nested) locks when part
of the read side critical section was preemptible.
Therefore solve it by making the entire RCU read side non-preemptible.
Also pull out the retry from under the non-preempt to play nice with RT.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Helped-out-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Olsa [Tue, 9 Jul 2013 15:44:11 +0000 (17:44 +0200)]
perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario
commit
06f417968beac6e6b614e17b37d347aa6a6b1d30 upstream.
The '!ctx->is_active' check has a valid scenario, so
there's no need for the warning.
The reason is that there's a time window between the
'ctx->is_active' check in the perf_event_enable() function
and the __perf_event_enable() function having:
- IRQs on
- ctx->lock unlocked
where the task could be killed and 'ctx' deactivated by
perf_event_exit_task(), ending up with the warning below.
So remove the WARN_ON_ONCE() check and add comments to
explain it all.
This addresses the following warning reported by Vince Weaver:
[ 324.983534] ------------[ cut here ]------------
[ 324.984420] WARNING: at kernel/events/core.c:1953 __perf_event_enable+0x187/0x190()
[ 324.984420] Modules linked in:
[ 324.984420] CPU: 19 PID: 2715 Comm: nmi_bug_snb Not tainted 3.10.0+ #246
[ 324.984420] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010
[ 324.984420]
0000000000000009 ffff88043fce3ec8 ffffffff8160ea0b ffff88043fce3f00
[ 324.984420]
ffffffff81080ff0 ffff8802314fdc00 ffff880231a8f800 ffff88043fcf7860
[ 324.984420]
0000000000000286 ffff880231a8f800 ffff88043fce3f10 ffffffff8108103a
[ 324.984420] Call Trace:
[ 324.984420] <IRQ> [<
ffffffff8160ea0b>] dump_stack+0x19/0x1b
[ 324.984420] [<
ffffffff81080ff0>] warn_slowpath_common+0x70/0xa0
[ 324.984420] [<
ffffffff8108103a>] warn_slowpath_null+0x1a/0x20
[ 324.984420] [<
ffffffff81134437>] __perf_event_enable+0x187/0x190
[ 324.984420] [<
ffffffff81130030>] remote_function+0x40/0x50
[ 324.984420] [<
ffffffff810e51de>] generic_smp_call_function_single_interrupt+0xbe/0x130
[ 324.984420] [<
ffffffff81066a47>] smp_call_function_single_interrupt+0x27/0x40
[ 324.984420] [<
ffffffff8161fd2f>] call_function_single_interrupt+0x6f/0x80
[ 324.984420] <EOI> [<
ffffffff816161a1>] ? _raw_spin_unlock_irqrestore+0x41/0x70
[ 324.984420] [<
ffffffff8113799d>] perf_event_exit_task+0x14d/0x210
[ 324.984420] [<
ffffffff810acd04>] ? switch_task_namespaces+0x24/0x60
[ 324.984420] [<
ffffffff81086946>] do_exit+0x2b6/0xa40
[ 324.984420] [<
ffffffff8161615c>] ? _raw_spin_unlock_irq+0x2c/0x30
[ 324.984420] [<
ffffffff81087279>] do_group_exit+0x49/0xc0
[ 324.984420] [<
ffffffff81096854>] get_signal_to_deliver+0x254/0x620
[ 324.984420] [<
ffffffff81043057>] do_signal+0x57/0x5a0
[ 324.984420] [<
ffffffff8161a164>] ? __do_page_fault+0x2a4/0x4e0
[ 324.984420] [<
ffffffff8161665c>] ? retint_restore_args+0xe/0xe
[ 324.984420] [<
ffffffff816166cd>] ? retint_signal+0x11/0x84
[ 324.984420] [<
ffffffff81043605>] do_notify_resume+0x65/0x80
[ 324.984420] [<
ffffffff81616702>] retint_signal+0x46/0x84
[ 324.984420] ---[ end trace
442ec2f04db3771a ]---
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1373384651-6109-2-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Olsa [Tue, 9 Jul 2013 15:44:10 +0000 (17:44 +0200)]
perf: Clone child context from parent context pmu
commit
734df5ab549ca44f40de0f07af1c8803856dfb18 upstream.
Currently when the child context for inherited events is
created, it's based on the pmu object of the first event
of the parent context.
This is wrong for the following scenario:
- HW context having HW and SW event
- HW event got removed (closed)
- SW event stays in HW context as the only event
and its pmu is used to clone the child context
The issue starts when the cpu context object is touched
based on the pmu context object (__get_cpu_context). In
this case the HW context will work with SW cpu context
ending up with following WARN below.
Fixing this by using parent context pmu object to clone
from child context.
Addresses the following warning reported by Vince Weaver:
[ 2716.472065] ------------[ cut here ]------------
[ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x)
[ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn
[ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2
[ 2716.476035] Hardware name: AOpen DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2
[ 2716.476035]
0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18
[ 2716.476035]
ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad
[ 2716.476035]
ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550
[ 2716.476035] Call Trace:
[ 2716.476035] [<
ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70
[ 2716.476035] [<
ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f
[ 2716.476035] [<
ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194
[ 2716.476035] [<
ffffffff81032a37>] ? do_exit+0x3e7/0x90c
[ 2716.476035] [<
ffffffff810cd5ab>] ? __do_fault+0x359/0x394
[ 2716.476035] [<
ffffffff81032fe6>] ? do_group_exit+0x66/0x98
[ 2716.476035] [<
ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad
[ 2716.476035] [<
ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1
[ 2716.476035] [<
ffffffff8100205d>] ? do_signal+0x3c/0x432
[ 2716.476035] [<
ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141
[ 2716.476035] [<
ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90
[ 2716.476035] [<
ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118
[ 2716.476035] [<
ffffffff81050dd9>] ? mmdrop+0xd/0x1c
[ 2716.476035] [<
ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6
[ 2716.476035] [<
ffffffff81002473>] ? do_notify_resume+0x20/0x5d
[ 2716.476035] [<
ffffffff813654f5>] ? retint_signal+0x3d/0x78
[ 2716.476035] ---[ end trace
827178d8a5966c3d ]---
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1373384651-6109-1-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 11 Jul 2013 16:02:38 +0000 (18:02 +0200)]
staging: line6: Fix unlocked snd_pcm_stop() call
commit
86f0b5b86d142b9323432fef078a6cf0fb5dda74 upstream.
snd_pcm_stop() must be called in the PCM substream lock context.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Daney [Wed, 12 Jun 2013 17:28:33 +0000 (17:28 +0000)]
MIPS: Octeon: Don't clobber bootloader data structures.
commit
d949b4fe6d23dd92b5fa48cbf7af90ca32beed2e upstream.
Commit
abe77f90dc (MIPS: Octeon: Add kexec and kdump support) added a
bootmem region for the kernel image itself. The problem is that this
is rounded up to a 0x100000 boundary, which is memory that may not be
owned by the kernel. Depending on the kernel's configuration based
size, this 'extra' memory may contain data passed from the bootloader
to the kernel itself, which if clobbered makes the kernel crash in
various ways.
The fix: Quit rounding the size up, so that we only use memory
assigned to the kernel.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5449/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 5 Jul 2013 15:40:13 +0000 (17:40 +0200)]
thermal: cpu_cooling: fix stub function
commit
e8d39240d635ed9bcaddbec898b1c9f063c5dbb2 upstream.
The function stub for cpufreq_cooling_get_level introduced
in
57df81069 "Thermal: exynos: fix cooling state translation"
is not syntactically correct C and needs to be fixed to avoid
this error:
In file included from drivers/thermal/db8500_thermal.c:20:0:
include/linux/cpu_cooling.h: In function 'cpufreq_cooling_get_level':
include/linux/cpu_cooling.h:57:1:
error: parameter name omitted unsigned long cpufreq_cooling_get_level(unsigned int, unsigned int) ^
include/linux/cpu_cooling.h:57:1: error: parameter name omitted
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Amit Daniel kachhap <amit.daniel@samsung.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Max Filippov [Sun, 9 Jun 2013 00:52:11 +0000 (04:52 +0400)]
xtensa: adjust boot parameters address when INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is selected
commit
c5a771d0678f9613e9f89cf1a5bdcfa5b08b225b upstream.
The virtual address of boot parameters chain is passed to the kernel via
a2 register. Adjust it in case it is remapped during MMUv3 -> MMUv2
mapping change, i.e. when it is in the first 128M.
Also fix interpretation of initrd and FDT addresses passed in the boot
parameters: these are physical addresses.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Williamson [Fri, 21 Jun 2013 20:33:19 +0000 (14:33 -0600)]
iommu/amd: Only unmap large pages from the first pte
commit
60d0ca3cfd199b6612bbbbf4999a3470dad38bb1 upstream.
If we use a large mapping, the expectation is that only unmaps from
the first pte in the superpage are supported. Unmaps from offsets
into the superpage should fail (ie. return zero sized unmap). In the
current code, unmapping from an offset clears the size of the full
mapping starting from an offset. For instance, if we map a 16k
physically contiguous range at IOVA 0x0 with a large page, then
attempt to unmap 4k at offset 12k, 4 ptes are cleared (12k - 28k) and
the unmap returns 16k unmapped. This potentially incorrectly clears
valid mappings and confuses drivers like VFIO that use the unmap size
to release pinned pages.
Fix by refusing to unmap from offsets into the page.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emil Velikov [Tue, 2 Jul 2013 13:44:12 +0000 (14:44 +0100)]
drm/nv50-/disp: Use output specific mask in interrupt
commit
378f2bcdf7c971453d11580936dc0ffe845f5880 upstream.
The commit
commit
476e84e126171d809f9c0b5d97137f5055f95ca8
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Mon Feb 11 09:24:23 2013 +1000
drm/nv50-/disp: initial supervisor support for off-chip encoders
changed the write mask in one of the interrupt functions for on-chip encoders,
causing a regression in certain VGA dual-head setups. This commit reintroduces
the mask thus resolving the regression
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66129
Reported-and-Tested-by: Yves-Alexis <corsac@debian.org>
CC: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilia Mirkin [Wed, 3 Jul 2013 07:06:02 +0000 (03:06 -0400)]
drm/nva3/disp: Fix HDMI audio regression
commit
bf03d1b293cc556df53545e318110505014d805e upstream.
This is the nva3 counterpart to commit
beba44b17 (drm/nv84/disp: Fix
HDMI audio regression). The regression happened as a result of
refactoring in commit
8e9e3d2de (drm/nv84/disp: move hdmi control into
core).
Reported-and-tested-by: Max Baldwin <archerseven@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Mon, 10 Jun 2013 13:57:07 +0000 (09:57 -0400)]
drm/radeon: add backlight quirk for hybrid mac
commit
80101790670385a85aca35ecae4b89e3f2fceecc upstream.
Mac laptops with multiple GPUs apparently use the gmux
driver for backlight control. Don't register a radeon
backlight interface. We may need to add other pci ids
for other hybrid mac laptops.
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=65377
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Fri, 7 Jun 2013 14:41:03 +0000 (10:41 -0400)]
drm/radeon: fix AVI infoframe generation
commit
f100380ecd8287b0909d3c5694784adc46e78a4a upstream.
- remove adding 2 to checksum, this is incorrect.
This was incorrectly introduced in:
92db7f6c860b8190571a9dc1fcbc16d003422fe8
http://lists.freedesktop.org/archives/dri-devel/2011-December/017717.html
However, the off by 2 was due to adding the version twice.
From the examples in the URL above:
[Rafał Miłecki][RV620] fglrx:
0x7454: 00 A8 5E 79 R600_HDMI_VIDEOINFOFRAME_0
0x7458: 00 28 00 10 R600_HDMI_VIDEOINFOFRAME_1
0x745C: 00 48 00 28 R600_HDMI_VIDEOINFOFRAME_2
0x7460: 02 00 00 48 R600_HDMI_VIDEOINFOFRAME_3
===================
(0x82 + 0x2 + 0xD) + 0x1F8 = 0x289
-0x289 = 0x77
However, the payload sum is not 0x1f8, it's 0x1f6.
00 + A8 + 5E + 00 +
00 + 28 + 00 + 10 +
00 + 48 + 00 + 28 +
00 + 48 =
0x1f6
Bits 25:24 of HDMI_VIDEOINFOFRAME_3 are the packet version, not part
of the payload. So the total would be:
(0x82 + 0x2 + 0xD) + 0x1f6 = 0x287
-0x287 = 0x79
- properly emit the AVI infoframe version. This was not being
emitted previous which is probably what caused the issue above.
This should fix blank screen when HDMI audio is enabled on
certain monitors.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcin Slusarz [Tue, 11 Jun 2013 08:50:30 +0000 (10:50 +0200)]
drm/nouveau: use vmalloc for pgt allocation
commit
d005f51eb93d71cd40ebd11dd377453fa8c8a42a upstream.
Page tables on nv50 take 48kB, which can be hard to allocate in one piece.
Let's use vmalloc.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lemire [Thu, 27 Jun 2013 17:38:59 +0000 (13:38 -0400)]
drm/mgag200: Added resolution and bandwidth limits for various G200e products.
commit
abbee6238775c6633a3779962e9e5b5cb9823749 upstream.
At the larger resolutions, the g200e series sometimes struggles with
maintaining a proper output. Problems like flickering or black bands appearing
on screen can occur. In order to avoid this, limitations regarding resolutions
and bandwidth have been added for the different variations of the g200e series.
This code was ported from the old xorg mga driver.
Signed-off-by: Julia Lemire <jlemire@matrox.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YoungJun Cho [Wed, 26 Jun 2013 23:58:33 +0000 (08:58 +0900)]
drm/gem: fix not to assign error value to gem name
commit
2e07fb229396f99fc173d8612f0f83ea9de0341b upstream.
If idr_alloc() is failed, obj->name can be error value. Also
it cleans up duplicated flink processing code.
This regression has been introduced in
commit
2e928815c1886fe628ed54623aa98d0889cf5509
Author: Tejun Heo <tj@kernel.org>
Date: Wed Feb 27 17:04:08 2013 -0800
drm: convert to idr_alloc()
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Fri, 28 Jun 2013 15:54:08 +0000 (16:54 +0100)]
drm/i915: Only clear write-domains after a successful wait-seqno
commit
daa13e1ca587bc773c1aae415ed1af6554117bd4 upstream.
In the introduction of the non-blocking wait, I cut'n'pasted the wait
completion code from normal locked path. Unfortunately, this neglected
that the normal path returned early if the wait returned early. The
result is that read-only waits may return whilst the GPU is still
writing to the bo.
Fixes regression from
commit
3236f57a0162391f84b93f39fc1882c49a8998c7 [v3.7]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Aug 24 09:35:09 2012 +0100
drm/i915: Use a non-blocking wait for set-to-domain ioctl
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66163
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Widawsky [Wed, 26 Jun 2013 04:53:40 +0000 (21:53 -0700)]
drm/i915: Fix context sizes on HSW
commit
a0de80a0e07032a111230ec92eca563f9d93648d upstream.
With updates to the spec, we can actually see the context layout, and
how many dwords are allocated. That table suggests we need 70720 bytes
per HW context. Rounded up, this is 18 pages. Looking at what lives
after the current 4 pages we use, I can't see too much important (mostly
it's d3d related), but there are a couple of things which look scary. I
am hopeful this can explain some of our odd HSW failures.
v2: Make the context only 17 pages. The power context space isn't used
ever, and execlists aren't used in our driver, making the actual total
66944 bytes.
v3: Add a comment to the code. (Jesse & Paulo)
Reported-by: "Azad, Vinit" <vinit.azad@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Mon, 24 Jun 2013 19:33:28 +0000 (21:33 +0200)]
drm/i915: Fix up sdvo hpd pins for i965g/gm
commit
4f7fd7095d85cd31c86cb9ba87bc301319630ccc upstream.
Bspec seems to be full of lies, at least it disagress with reality:
Two systems corrobated that SDVO hpd bits are the same as on gen3.
v2: Update comment a bit.
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arthur Ranyan <arthur.j.runyan@intel.com>
Reported-and-tested-by: Alex Fiestas <afiestas@kde.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58405
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Herrenschmidt [Wed, 3 Jul 2013 06:01:10 +0000 (16:01 +1000)]
of: Fix address decoding on Bimini and js2x machines
commit
6dd18e4684f3d188277bbbc27545248487472108 upstream.
Commit:
e38c0a1fbc5803cbacdaac0557c70ac8ca5152e7
of/address: Handle #address-cells > 2 specially
broke real time clock access on Bimini, js2x, and similar powerpc
machines using the "maple" platform. That code was indirectly relying
on the old (broken) behaviour of the translation for the hypertransport
to ISA bridge.
This fixes it by treating hypertransport as a PCI bus
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Jonghwan Choi <jhbird.choi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Wed, 26 Jun 2013 14:55:40 +0000 (10:55 -0400)]
svcrpc: don't error out on small tcp fragment
commit
1f691b07c5dc51b2055834f58c0f351defd97f27 upstream.
Though clients we care about mostly don't do this, it is possible for
rpc requests to be sent in multiple fragments. Here we have a sanity
check to ensure that the final received rpc isn't too small--except that
the number we're actually checking is the length of just the final
fragment, not of the whole rpc. So a perfectly legal rpc that's
unluckily fragmented could cause the server to close the connection
here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Wed, 26 Jun 2013 15:09:06 +0000 (11:09 -0400)]
svcrpc: fix handling of too-short rpc's
commit
cf3aa02cb4a0c5af5557dd47f15a08a7df33182a upstream.
If we detect that an rpc is too short, we abort and close the
connection. Except, there's a bug here: we're leaving sk_datalen
nonzero without leaving any pages in the sk_pages array. The most
likely result of the inconsistency is a subsequent crash in
svc_tcp_clear_pages.
Also demote the BUG_ON in svc_tcp_clear_pages to a WARN.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. Bruce Fields [Mon, 8 Jul 2013 17:44:45 +0000 (13:44 -0400)]
svcrpc: fix failures to handle -1 uid's
commit
0979292bfa301cb87d936b69af428090d2feea1b upstream.
As of
f025adf191924e3a75ce80e130afcd2485b53bb8 "sunrpc: Properly decode
kuids and kgids in RPC_AUTH_UNIX credentials" any rpc containing a -1
(0xffff) uid or gid would fail with a badcred error.
Commit
afe3c3fd5392b2f0066930abc5dbd3f4b14a0f13 "svcrpc: fix failures to
handle -1 uid's and gid's" fixed part of the problem, but overlooked the
gid upcall--the kernel can request supplementary gid's for the -1 uid,
but mountd's attempt write a response will get -EINVAL.
Symptoms were nfsd failing to reply to the first attempt to use a newly
negotiated krb5 context.
Reported-by: Sven Geggus <lists@fuchsschwanzdomain.de>
Tested-by: Sven Geggus <lists@fuchsschwanzdomain.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhangwei(Jovi) [Thu, 13 Jun 2013 06:21:51 +0000 (14:21 +0800)]
uprobes: Fix return value in error handling path
commit
fa44063f9ef163c3a4c8d8c0465bb8a056b42035 upstream.
When wrong argument is passed into uprobe_events it does not return
an error:
[root@jovi tracing]# echo 'p:myprobe /bin/bash' > uprobe_events
[root@jovi tracing]#
The proper response is:
[root@jovi tracing]# echo 'p:myprobe /bin/bash' > uprobe_events
-bash: echo: write error: Invalid argument
Link: http://lkml.kernel.org/r/51B964FF.5000106@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <srikar@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bu, Yitian [Mon, 18 Feb 2013 12:53:37 +0000 (12:53 +0000)]
printk: Fix rq->lock vs logbuf_lock unlock lock inversion
commit
dbda92d16f8655044e082930e4e9d244b87fde77 upstream.
commit
07354eb1a74d1 ("locking printk: Annotate logbuf_lock as raw")
reintroduced a lock inversion problem which was fixed in commit
0b5e1c5255 ("printk: Release console_sem after logbuf_lock"). This
happened probably when fixing up patch rejects.
Restore the ordering and unlock logbuf_lock before releasing
console_sem.
Signed-off-by: ybu <ybu@qti.qualcomm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/E807E903FE6CBE4D95E420FBFCC273B827413C@nasanexd01h.na.qualcomm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Thu, 23 May 2013 23:06:09 +0000 (01:06 +0200)]
mac80211: close AP_VLAN interfaces before unregistering all
commit
4c8a9d4bfaf7dbc7d2168494904d79d22cc01db7 upstream.
Since Eric's commit
efe117ab8 ("Speedup ieee80211_remove_interfaces")
there's a bug in mac80211 when it unregisters with AP_VLAN interfaces
up. If the AP_VLAN interface was registered after the AP it belongs
to (which is the typical case) and then we get into this code path,
unregister_netdevice_many() will crash because it isn't prepared to
deal with interfaces being closed in the middle of it. Exactly this
happens though, because we iterate the list, find the AP master this
AP_VLAN belongs to and dev_close() the dependent VLANs. After this,
unregister_netdevice_many() won't pick up the fact that the AP_VLAN
is already down and will do it again, causing a crash.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hauke Mehrtens [Sun, 9 Jun 2013 16:53:58 +0000 (18:53 +0200)]
b43: ensue that BCMA is "y" when B43 is "y"
commit
693026ef2e751fd94d2e6c71028e68343cc875d5 upstream.
When b43 gets build into the kernel and it should use bcma we have to
ensure that bcma was also build into the kernel and not as a module.
In this patch this is also done for SSB, although you can not
build b43 without ssb support for now.
This fixes a build problem reported by Randy Dunlap in
5187EB95.
2060605@infradead.org
Reported-By: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luiz Capitulino [Tue, 2 Jul 2013 06:05:13 +0000 (15:35 +0930)]
virtio_balloon: leak_balloon(): only tell host if we got pages deflated
commit
8c6bab4f3874d31804a00782c48a8f244a0d3cc0 upstream.
balloon_page_dequeue() can return NULL. If it does for the first page
being freed then leak_balloon() will create a scatter list with len=0.
Which in turn seems to generate an invalid virtio request.
I didn't get this in practice, I found it by code review. On the other
hand, such an invalid virtio request will cause errors in QEMU and
fill_balloon() also performs the same check implemented by this commit.
This bug was introduced in
e2250429.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reddy, Sreekanth [Tue, 26 Feb 2013 11:29:59 +0000 (16:59 +0530)]
SCSI: mpt2sas: Fix for issue Missing delay not getting set during system bootup
commit
b0df96a0068daee4f9c2189c29b9053eb6e46b17 upstream.
Missing delay is not getting set properly. The reason is that it is not
defined in the same file from where it is being invoked. The fix is to move
the missing delay module parameter from mpt2sas_base.c to mpt2sas_scsh.c.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sreekanth Reddy [Fri, 1 Feb 2013 19:28:20 +0000 (00:58 +0530)]
SCSI: mpt2sas: fix firmware failure with wrong task attribute
commit
48ba2efc382f94fae16ca8ca011e5961a81ad1ea upstream.
When SCSI command is received with task attribute not set, set it to SIMPLE.
Previously it is set to untagged. This causes the firmware to fail the commands.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steffen Maier [Fri, 26 Apr 2013 15:34:54 +0000 (17:34 +0200)]
SCSI: zfcp: status read buffers on first adapter open with link down
commit
9edf7d75ee5f21663a0183d21f702682d0ef132f upstream.
Commit
64deb6efdc5504ce97b5c1c6f281fffbc150bd93
"[SCSI] zfcp: Use status_read_buf_num provided by FCP channel"
started using a value returned by the channel but only evaluated the value
if the fabric link is up.
Commit
8d88cf3f3b9af4713642caeb221b6d6a42019001
"[SCSI] zfcp: Update status read mempool"
introduced mempool resizings based on the above value.
On setting an FCP device online for the very first time since boot, a new
zeroed adapter object is allocated. If the link is down, the number of
status read requests remains zero. Since just the config data exchange is
incomplete, we proceed with adapter open recovery. However, we
unconditionally call mempool_resize with adapter->stat_read_buf_num == 0 in
this case.
This causes a kernel message "kernel BUG at mm/mempool.c:131!" in process
"zfcperp<FCP-device-bus-ID>" with last function mempool_resize in Krnl PSW
and zfcp_erp_thread in the Call Trace.
Don't evaluate channel values which are invalid on link down. The number of
status read requests is always valid, evaluated, and set to a positive
minimum greater than zero. The adapter open recovery can proceed and the
channel has status read buffers to inform us on a future link up event.
While we are not aware of any other code path that could result in mempool
resize attempts of size zero, we still also initialize the number of status
read buffers to be posted to a static minimum number on adapter object
allocation.
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steffen Maier [Fri, 26 Apr 2013 15:33:45 +0000 (17:33 +0200)]
SCSI: zfcp: block queue limits with data router
commit
5fea4291deacd80188b996d2f555fc6a1940e5d4 upstream.
Commit
86a9668a8d29ea711613e1cb37efa68e7c4db564
"[SCSI] zfcp: support for hardware data router"
reduced the initial block queue limits in the scsi_host_template to the
absolute minimum and adjusted them later on. However, the adjustment was
too late for the BSG devices of Scsi_Host and fc_host.
Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a
BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result,
users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return
with error HBA_STATUS_ERROR.
Initialize the block queue limits in zfcp_scsi_host_template to the
greatest common denominator (GCD).
While we cannot exploit the slightly enlarged maximum request size with
data router, this should be neglectible. Doing so also avoids running into
trouble after live guest relocation (LGR) / migration from a data router
FCP device to an FCP device that does not support data router. In that
case, zfcp would figure out the new limits on adapter recovery, but the
fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and
now too large queue limits.
It should also OK, not to use half the size as in the DIX case, because
fc_host and Scsi_Host do not transport FCP requests including SCSI commands
using protection data.
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Hansel [Fri, 26 Apr 2013 15:32:14 +0000 (17:32 +0200)]
SCSI: zfcp: fix adapter (re)open recovery while link to SAN is down
commit
f76ccaac4f82c463a037aa4a1e4ccb85c7011814 upstream.
FCP device remains in status ERP_FAILED when device is switched online
or adapter recovery is triggered while link to SAN is down.
When Exchange Configuration Data command returns the FSF status
FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE it aborts the exchange process.
The only retries are done during the common error recovery procedure
(i.e. max. 3 retries with 8sec sleep between) and remains in status
ERP_FAILED with QDIO down.
This commit reverts the commit
0df138476c8306478d6e726f044868b4bccf411c
(zfcp: Fix adapter activation on link down).
When FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE is received the
adapter recovery will be finished without any retries. QDIO will be
up now and status changes such as LINK UP will be received now.
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mahesh Rajashekhara [Tue, 18 Jun 2013 11:32:07 +0000 (17:02 +0530)]
SCSI: aacraid: Fix for arrays are going offline in the system. System hangs
commit
c5bebd829dd95602c15f8da8cc50fa938b5e0254 upstream.
One of the customer had reported that the set of raid logical arrays will
become unavailable (I/O offline) after a long hours of IO stress test. The OS
wouldn`t be accessible afterwards and require a hard reset.
This driver patch has a fix for race condition between the doorbell and the
circular buffer. The driver is modified to do an extra read after clearing the
doorbell in case there had been a completion posted during the small timing
window.
With this fix, we ran IO stress for ~13 days. There were no IO failures.
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>