igb: respect E1000_VMOLR_RSSE

RSS for VFs is only enabled if VMOLR[n].RSSE is set.

Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: check oversized packets for VMDq

Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: implement VFRE and VFTE registers

Also introduce:
- Checks for RXDCTL/TXDCTL queue enable bits
- IGB_NUM_VM_POOLS enum (Sec 1.5: Table 1-7)

Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: add ICR_RXDW

IGB uses RXDW ICR bit to indicate that rx descriptor has been written
back. This is the same as RXT0 bit in older HW.

Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: handle PF/VF reset properly

Use PFRSTD to reset RSTI bit for VFs, and raise VFLRE interrupt when VF
is reset.

Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

MAINTAINERS: Add Sriram Yagnaraman as a igb reviewer

I would like to review and be informed on changes to igb device

Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

hw/net/net_tx_pkt: Align l3_hdr

Align the l3_hdr member of NetTxPkt by defining it as a union of
ip_header, ip6_header, and an array of octets.

Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1544
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

hw/net/net_tx_pkt: Ignore ECN bit

No segmentation should be performed if gso type is
VIRTIO_NET_HDR_GSO_NONE even if ECN bit is set.

Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1544
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Fix DMA requester specification for Tx packet

igb used to specify the PF as DMA requester when reading Tx packets.
This made Tx requests from VFs to be performed on the address space of
the PF, defeating the purpose of SR-IOV. Add some logic to change the
requester depending on the queue, which can be assigned to a VF.

Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

igb: Save more Tx states

The current implementation of igb uses only part of a advanced Tx
context descriptor and first data descriptor because it misses some
features and sniffs the trait of the packet instead of respecting the
packet type specified in the descriptor. However, we will certainly
need the entire Tx context descriptor when we update igb to respect
these ignored fields. Save the entire context descriptor and first
data descriptor except the buffer address to prepare for such a change.

This also introduces the distinction of contexts with different
indexes, which was not present in e1000e but in igb.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Merge tag 'pull-request-2023-03-24' of https://gitlab.com/thuth/qemu into staging

* Remove TABs in hw/ide and hw/block
* Two fixes for GCC 13
* MSYS2 CI job improvements

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmQdwwkRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXnWg//TcpLes6b30dTFJ3NwTYaL+ElGvcfQiXx
# DNUdmCuxH+2YJGORvVutbVslxFAXgYn8z6lmjgTSx+HziwmY3WhtWSQNOAxRrpoj
# Rq1r59q7FPKY/qoLjTMeQDe3O+jrGte7dX14TbKRpPDSZxxJjpswACDgCsGWqE8x
# 0SGSLRlqqqnrQE0H1RfmP++0yAtHmGSN3TK0/bFmY4B+mMpj8beAq020h2iCCdbP
# 7qWMI0o96lAl/D/wA55BNKuWsdXdIeQjPPoxxGEtiXN27Xk7oyQS47JkZdz6C1Lq
# V8/lF2Pa/eC6uPjnxpQDGp1IkaBE7/rn4450h9EMESrjL50As2yPUkw3BecqimHA
# fYMbSXrGe9urIflkZcY7Nx2PaBB5v1ZR3iiemjd8qahjgiT8DJYWtjFYKbuFsqJ+
# Ra13Ey9PEX13dROXBAFeX+rdaMiRQEkyQv8GSwPlnNW7OzFJc/qr8EIQOuu1flmm
# 7KLYp6h45Os/fN90Lnn5N9LhjUET+2XDqEljAyyziTjsIuc1i3mPjR45j0KSq7tv
# eBp6SXpHkXrpKDrXSsJMa4SzSfK6VOHrtseE4b2XCKQLr4oSpr8d6eembKGyvNzs
# zh4TtsC+WfTu4HY5Dcbat34QAtAfGUr7ERX4/s+bnvQd944/7skOAqM7Ia9tOMKH
# ABuxJ8A7PIY=
# =myGG
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Mar 2023 15:34:33 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2023-03-24' of https://gitlab.com/thuth/qemu:
  Revert "docs/about/deprecated: Deprecate 32-bit arm hosts for system emulation"
  cirrus-ci: Remove MSYS2 jobs duplicated with gitlab-ci
  gitlab-ci: Cover SPICE in the MSYS2 job
  ui/spice: fix compilation on win32
  target/ppc: Fix helper_pminsn() prototype
  target/s390x: Fix float_comp_to_cc() prototype
  hw/block: replace TABs with space
  hw/ide: replace TABs with space

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-xen-20230324' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm into staging

Xen queue

- fix guest creation when -xen-domid-restrict is used.
- fix Xen PV guest creation.

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAmQdubMACgkQDPVXL9f7
# Va/bhQgA75nw4DB5LxIQLe+G/mLEvpf79Kg5lQNZ8gn84ms1zhGUWvS179xg/mT5
# F+JvVhOLMihJpWnaoiWaQQmE9VydzllHQHMZFdK0QNpVWm9l/xrw0hEkLsBMA/RS
# 1t2w90gLa4iDH9E0O7xWCTDLdTN5pbCmTMBJ2m3a8OYuV2/y0nYtxazU8vHpkn6V
# 6Td2cY8OKuUf14UW1hY5nqGb6SMpNTzmcnW3jAYveVBZx+BE5ALKaGo2+nCIJ6oH
# wlQ9a7UsUwLCrIxcSXytDH1kRa+zBhQPVsedeoA08eIZsBhSbH/AD3TNxipTHv0o
# jBlyXbZCjNiFe8sLi077Cvb1fiCAiQ==
# =Pc9Y
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Mar 2023 14:54:43 GMT
# gpg:                using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal]
# gpg:                 aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A  7161 D8D5 7199 DF83 42C8
#      Subkey fingerprint: F80C 0063 08E2 2CFD 8A92  E798 0CF5 572F D7FB 55AF

* tag 'pull-xen-20230324' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm:
  hw/xenpv: Initialize Xen backend operations
  accel/xen: Fix DM state change notification in dm_restrict mode

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'qga-pull-2023-03-22' of github.com:kostyanf14/qemu into staging

qga-pull-2023-03-22

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmQbUgoACgkQ711egWG6
# hOe8pw/9Gc3rySQ0mEt45kb5ESpRbwvpkYHEmA4aYmhDhuVHjuWpw1MgL980GTGe
# X2/y1ApcS6GXme4Bb3DbLu1U+N/B9l2yHDYmAMpvtljydcOc0F5KRnwhYFtB6P2L
# nSmOorIteaQmZ/DYnGF3u7KZ08dIOqujZ6QUTDAdR2q7+P/9kW4kuF3/XJHXVA8Q
# f+DQ8dYLSDw/eLPcwM18IdUV3xhTZgvSnADiQ4L3NEexLcrq7ZFYv1S66Q5+dQTK
# xijFSDVWR8+Q6PVBOBz5bP+hrYc+rmjAblk+DT+LkPruNOuBY1y09RPmaKJnvBjo
# hsj7BmcJ3dVPRmADy7gQWaE2F8A1GR4OU79JSCm46BHUMDGm1363gwhvPSeLeQQ9
# 5pqKyRImU3cMF3Re06ZsOX5D02jWz7VSGKWT/JEHnWrX9U5hurnNl20pgiAbKpkv
# k10IUfEufTfQLjz3oNY/At1XFtqg8xVGRS3bhwWoFBrWiUEwVYGEg1AwrtSQ25Tw
# +7j54A3DSvJie5nxYVJAnpZMNQxUVaBkF5PWJ1fRy23UbZZwPT2MSKZDbQPAvl9g
# 7K/rZVDHnBxTA/hvMeoGuxCY/kpkAV0WfiKAi1zzNGdKvxDKlyFJAD07KtfyN5oF
# QH2HQwTu1/gma+hWzSuJi2rhhcEXwojYemLfLMzCK4OBuQj8dLE=
# =uTF5
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 Mar 2023 19:07:54 GMT
# gpg:                using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423  EB84 EF5D 5E81 61BA 84E7

* tag 'qga-pull-2023-03-22' of github.com:kostyanf14/qemu:
  qga/vss-win32: fix warning for clang++-15

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/xenpv: Initialize Xen backend operations

As the Xen backend operations were abstracted out into a function table to
allow for internally emulated Xen support, we missed the xen_init_pv()
code path which also needs to install the operations for the true Xen
libraries. Add the missing call to setup_xen_backend_ops().

Fixes: b6cacfea0b38 ("hw/xen: Add evtchn operations to allow redirection to internal emulation")
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <5dfb65342d4502c1ce2f890c97cff20bf25b3860.camel@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>

Revert "docs/about/deprecated: Deprecate 32-bit arm hosts for system emulation"

This reverts commit 1d0a8eba38cdddd028ea02c6e0b68f0a4c9a3cbf.

The commit made the wrong assumption that 64-bit distros are most
common these days on arm devices, but as Liviu Ionescu pointed out,
the recommended OS for the very popular Raspberry Pi boards is still
the 32-bit variant, and thus likely still used by a lot of people:

 https://www.raspberrypi.com/software/operating-systems/

Thus it's likely still a little bit too early to put this host
environment on the deprecation list and we should wait a little
bit longer 'til 64-bit distros are the predominant ones.

Message-Id: <20230317165504.613172-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

cirrus-ci: Remove MSYS2 jobs duplicated with gitlab-ci

- Various developers are reluctant to git Cirrus-CI the permissions
  requested to access their GitHub account.

- When we use the cirrus-run script to trigger Cirrus-CI job from
  GitLab-CI, the GitLab-CI job is restricted to a 1h timeout
  (often not enough).

- Although Cirrus-CI VMs are more powerful than GitLab-CI ones,
  its free plan is limited in 2 concurrent jobs.

- The GitLab-CI MSYS2 jobs are a 1:1 mapping with the Cirrus-CI ones
  (modulo the environment caching).

Reduce the maintenance burden by removing the Cirrus-CI config file,
keeping the GitLab-CI jobs.

Update Yonggang Luo's maintenance file list to the new file, which
use the same environment shell.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230322135721.61138-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

gitlab-ci: Cover SPICE in the MSYS2 job

Include the mingw-w64-x86_64-spice package so SPICE is covered:

  C compiler for the host machine: cc -m64 -mcx16 (gcc 12.2.0 "cc (Rev10, Built by MSYS2 project) 12.2.0")
  ...
  Run-time dependency spice-protocol found: YES 0.14.4
  Run-time dependency spice-server found: YES 0.15.1

In particular this would have helped catching the build issue
reported as https://gitlab.com/qemu-project/qemu/-/issues/1553:

  [1851/5253] Compiling C object libcommon.fa.p/ui_spice-core.c.obj
  FAILED: libcommon.fa.p/ui_spice-core.c.obj
  ../ui/spice-core.c: In function 'watch_remove':
  ../ui/spice-core.c:152:5: error: implicit declaration of function 'qemu_close_to_socket' [-Werror=implicit-function-declaration]
  152 |     qemu_close_to_socket(watch->fd);
      |     ^~~~~~~~~~~~~~~~~~~~
  ../ui/spice-core.c:152:5: error: nested extern declaration of 'qemu_close_to_socket' [-Werror=nested-externs]

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230322135721.61138-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

ui/spice: fix compilation on win32

qemu_close_to_socket() renaming left-over.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1553
Fixes: commit e40283d9a ("ui/spice: fix SOCKET handling regression")
Reported-by: Jintao Yin <nicememory@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230322075256.2043812-1-marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/ppc: Fix helper_pminsn() prototype

GCC13 reports an error:

../target/ppc/excp_helper.c:2625:6: error: conflicting types for ‘helper_pminsn’ due to enum/integer mismatch; have ‘void(CPUPPCState *, powerpc_pm_insn_t)’ {aka ‘void(struct CPUArchState *, powerpc_pm_insn_t)’} [-Werror=enum-int-mismatch]
 2625 | void helper_pminsn(CPUPPCState *env, powerpc_pm_insn_t insn)
      |      ^~~~~~~~~~~~~
In file included from /home/legoater/work/qemu/qemu.git/include/qemu/osdep.h:49,
                 from ../target/ppc/excp_helper.c:19:
/home/legoater/work/qemu/qemu.git/include/exec/helper-head.h:23:27: note: previous declaration of ‘helper_pminsn’ with type ‘void(CPUArchState *, uint32_t)’ {aka ‘void(CPUArchState *, unsigned int)’}
   23 | #define HELPER(name) glue(helper_, name)
      |                           ^~~~~~~

Fixes: 7778a575c7 ("ppc: Add P7/P8 Power Management instructions")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230321161609.716474-4-clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Fix float_comp_to_cc() prototype

GCC13 reports an error :

../target/s390x/tcg/fpu_helper.c:123:5: error: conflicting types for ‘float_comp_to_cc’ due to enum/integer mismatch; have ‘int(CPUS390XState *, FloatRelation)’ {aka ‘int(struct CPUArchState *, FloatRelation)’} [-Werror=enum-int-mismatch]

  123 | int float_comp_to_cc(CPUS390XState *env, FloatRelation float_compare)
      |     ^~~~~~~~~~~~~~~~
In file included from ../target/s390x/tcg/fpu_helper.c:23:
../target/s390x/s390x-internal.h:302:5: note: previous declaration of ‘float_comp_to_cc’ with type ‘int(CPUS390XState *, int)’ {aka ‘int(struct CPUArchState *, int)’}
  302 | int float_comp_to_cc(CPUS390XState *env, int float_compare);
      |     ^~~~~~~~~~~~~~~~

Fixes: 71bfd65c5f ("softfloat: Name compare relation enum")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230321161609.716474-3-clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/block: replace TABs with space

Bring the block files in line with the QEMU coding style, with spaces
for indentation. This patch partially resolves the issue 371.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/371
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230314095001.13801-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/ide: replace TABs with space

Bring the block files in line with the QEMU coding style, with spaces
for indentation. This patch partially resolves the issue 371.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/371
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315043229.62100-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

accel/xen: Fix DM state change notification in dm_restrict mode

When dm_restrict is set, QEMU isn't permitted to update the XenStore node
to indicate its running status. Previously, the xs_write() call would fail
but the failure was ignored.

However, in refactoring to allow for emulated XenStore operations, a new
call to xs_open() was added. That one didn't fail gracefully, causing a
fatal error when running in dm_restrict mode.

Partially revert the offending patch, removing the additional call to
xs_open() because the global 'xenstore' variable is still available; it
just needs to be used with qemu_xen_xs_write() now instead of directly
with the xs_write() libxenstore function.

Also make the whole thing conditional on !xen_domid_restrict. There's no
point even registering the state change handler to attempt to update the
XenStore node when we know it's destined to fail.

Fixes: ba2a92db1ff6 ("hw/xen: Add xenstore operations to allow redirection to internal emulation")
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Co-developed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <1f141995bb61af32c2867ef5559e253f39b0949c.camel@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>

qga/vss-win32: fix warning for clang++-15

Reported when compiling with clang-windows-arm64.

../qga/vss-win32/install.cpp:537:9: error: variable 'hr' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
    if (!(ControlService(service, SERVICE_CONTROL_STOP, NULL))) {
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../qga/vss-win32/install.cpp:545:12: note: uninitialized use occurs here
    return hr;
           ^~

Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Fixes: 917ebcb170 ("qga-win: Fix QGA VSS Provider service stop failure")
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Kostiantyn Kostiuk <kostyanf14@live.com>

Merge tag 'pull-for-8.0-220323-1' of https://gitlab.com/stsquad/qemu into staging

Misc fixes for 8.0 (testing, plugins, gitdm)

  - update Alpine image used for testing images
  - include libslirp in custom runner build env
  - update gitlab-runner recipe for CentOS
  - update docker calls for better caching behaviour
  - document some plugin callbacks
  - don't use tags to define drives for lkft baseline tests
  - fix missing clear of plugin_mem_cbs
  - fix iotests to report individual results
  - update the gitdm metadata for contributors
  - avoid printing comments before g_test_init()
  - probe for multiprocess support before running avocado test
  - refactor igb.py into netdev-ethtool.py avocado test
  - rebuild openbsd to have more space space for iotests

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQbGkoACgkQ+9DbCVqe
# KkT2kQgAif70dGyn2bcv7OYv2LgAcSzDGTIsOfMM6gYc9bm3nU/R/cj9cy8Qgbnu
# v6BSVeig5AVBWI1UTuMNeKW1BWoQYfxg2kdduSyAzMZS44r09ch9iabSbxbadC1e
# L1RrRWlzs/MwWX8IclAyEj1jr+DB+/DwoG61IP3215XXSy84e/XV4j+JAyBEzXQ9
# LdznGyqyItg3S6rnVpRP/wjR0P3VlrYOLOjFfCw7gB8JrlW7KIr8hWkHXYuS2mF5
# UyXTBwbXwYB5BAx0zXC3SVgl0Gs1qymaRUX77dlotlpVVo0Ql8a06dHPtYrjMNgA
# /Nyat3Dbbu7Rai+IzZIJl3tGx850wg==
# =XR0M
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 Mar 2023 15:10:02 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* tag 'pull-for-8.0-220323-1' of https://gitlab.com/stsquad/qemu: (35 commits)
  qtests: avoid printing comments before g_test_init()
  contrib/gitdm: add group map for AMD
  contrib/gitdm: add more individual contributors
  contrib/gitdm: add revng to domain map
  contrib/gitdm: add Alibaba to the domain-map
  contrib/gitdm: add Amazon to the domain map
  contrib/gitdm: Add SYRMIA to the domain map
  contrib/gitdm: Add ASPEED Technology to the domain map
  iotests: remove the check-block.sh script
  iotests: register each I/O test separately with meson
  iotests: always use a unique sub-directory per test
  iotests: connect stdin to /dev/null when running tests
  iotests: print TAP protocol version when reporting tests
  iotests: strip subdir path when listing tests
  iotests: allow test discovery before building
  iotests: explicitly pass source/build dir to 'check' command
  tests/vm: custom openbsd partitioning to increase /home space
  tests/vm: skip X11 in openbsd installation
  include/qemu/plugin: Inline qemu_plugin_disable_mem_helpers
  include/qemu: Split out plugin-event.h
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qtests: avoid printing comments before g_test_init()

The TAP protocol version line must be the first thing printed on
stdout. The migration test failed that requirement in certain
scenarios:

  # Skipping test: Userfault not available (builtdtime)
  TAP version 13
  # random seed: R02Sc120c807f11053eb90bfea845ba1e368
  1..32
  # Start of x86_64 tests
  # Start of migration tests
  ....

The TAP version is printed by g_test_init(), so we need to make
sure that any methods which print are run after that.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317170553.592707-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>

contrib/gitdm: add group map for AMD

AMD recently acquired Xilinx and contributors have been transitioning
their emails across.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Vikram Garhwal <vikram.garhwal@amd.com>
Cc: Stefano Stabellini <stefano.stabellini@amd.com>
Cc: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Cc: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-Id: <20230315174331.2959-33-alex.bennee@linaro.org>

contrib/gitdm: add more individual contributors

I've only added the names explicitly acked.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Acked-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-32-alex.bennee@linaro.org>

contrib/gitdm: add revng to domain map

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Anton Johansson <anjo@rev.ng>
Cc: Niccolò Izzo <nizzo@rev.ng>
Cc: Paolo Montesel <babush@rev.ng>
Reviewed-by: Alessandro Di Federico <ale@rev.ng>
Message-Id: <20230315174331.2959-31-alex.bennee@linaro.org>

contrib/gitdm: add Alibaba to the domain-map

This replaces the previous attempt to add c-sky.com. Group everything
under Alibaba now.

Added as requested by LIU Zhiwei.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230315174331.2959-30-alex.bennee@linaro.org>

contrib/gitdm: add Amazon to the domain map

We have multiple contributors from both .co.uk and .com versions of
the address. Also add .de for completeness sake.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Paul Durrant <pdurrant@amazon.com>
Cc: David Wooodhouse <dwmw@amazon.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20230315174331.2959-29-alex.bennee@linaro.org>

contrib/gitdm: Add SYRMIA to the domain map

The company website lists QEMU amongst the things they work on so I
assume these are corporate contributions.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230315174331.2959-28-alex.bennee@linaro.org>

contrib/gitdm: Add ASPEED Technology to the domain map

We have a number of contributors from this domain which is a corporate
endeavour.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Steven Lee <steven_lee@aspeedtech.com>
Cc: Troy Lee <troy_lee@aspeedtech.com>
Cc: Howard Chiu <howard_chiu@aspeedtech.com>
Cc: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Troy Lee <troy_lee@aspeedtech.com>
Message-Id: <20230315174331.2959-27-alex.bennee@linaro.org>

iotests: remove the check-block.sh script

Now that meson directly invokes the individual I/O tests, the
check-block.sh wrapper script is no longer required.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-9-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-26-alex.bennee@linaro.org>

iotests: register each I/O test separately with meson

Currently meson registers a single test that invokes an entire group of
I/O tests, hiding the test granularity from meson. There are various
downsides of doing this

 * You cannot ask 'meson test' to invoke a single I/O test
 * The meson test timeout can't be applied to the individual
   tests
 * Meson only gets a pass/fail for the overall I/O test group
   not individual tests
 * If a CI job gets killed by the GitLab timeout, we don't
   get visibility into how far through the I/O tests
   execution got.

This switches meson to perform test discovery by invoking 'check' in
dry-run mode. It then registers one meson test case for each I/O
test. Parallel execution remains disabled since the I/O tests do not
use self contained execution environments and thus conflict with
each other.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-8-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-25-alex.bennee@linaro.org>

iotests: always use a unique sub-directory per test

The current test runner is only safe against parallel execution within
a single instance of the 'check' process, and only if -j is given a
value greater than 2. This prevents running multiple copies of the
'check' process for different test scenarios.

This change switches the output / socket directories to always include
the test name, image format and image protocol. This should allow full
parallelism of all distinct test scenarios. eg running both qcow2 and
raw tests at the same time, or both file and nbd tests at the same
time.

It would be possible to allow for parallelism of the same test scenario
by including the pid, but that would potentially let many directories
accumulate over time on failures, so is not done.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-7-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-24-alex.bennee@linaro.org>

iotests: connect stdin to /dev/null when running tests

Currently the tests have their stdin inherited from the test harness,
meaning they are connected to a TTY. The QEMU processes spawned by
certain tests, however, modify TTY settings and if the test exits
abnormally the settings might not be restored.

The python test harness thus has some logic which will capture the
initial TTY settings and restore them once all tests are finished.

This does not, however, take into account the possibility of many
copies of the 'check' program running in parallel. With parallel
execution, a later invokation may save the TTY state that QEMU has
already modified, and thus restore bad state leaving the TTY
non-functional.

None of the I/O tests shnould actually be interactive requiring
user input and so they should not require a TTY at all. To avoid
this while TTY save/restore complexity we can connect the test
stdin to /dev/null instead.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-6-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-23-alex.bennee@linaro.org>

iotests: print TAP protocol version when reporting tests

Recently meson started complaining that TAP test reports don't include
the TAP protocol version. While this warning is bogus and has since been
removed from Meson, it looks like good practice to include this header
going forward. The GLib library test harness has started unconditionally
printing the version, so this brings the I/O tests into line.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-5-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-22-alex.bennee@linaro.org>

iotests: strip subdir path when listing tests

When asking 'check' to list individual tests by invoking it in dry run
mode, it prints the paths to the tests relative to the base of the
I/O test directory.

When asking 'check' to run an individual test, however, it mandates that
only the unqualified test name is given, without any path prefix. This
inconsistency makes it harder to ask for a list of tests and then invoke
each one.

Thus the test listing code is change to flatten the test names, by
printing only the base name, which can be directly invoked.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-4-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-21-alex.bennee@linaro.org>

iotests: allow test discovery before building

The 'check' script can be invoked in "dry run" mode, in which case it
merely does test discovery and prints out all their names. Despite only
doing test discovery it still validates that the various QEMU binaries
can be found. This makes it impossible todo test discovery prior to
building QEMU. This is a desirable feature to support, because it will
let meson discover tests.

Fortunately the code in the TestEnv constructor is ordered in a way
that makes this fairly trivial to achieve. We can just short circuit
the constructor after the basic directory paths have been set.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-20-alex.bennee@linaro.org>

iotests: explicitly pass source/build dir to 'check' command

The 'check' script has some rather dubious logic whereby it assumes
that if invoked as a symlink, then it is running from a separate
source tree and build tree, otherwise it assumes the current working
directory is a combined source and build tree.

This doesn't work if you want to invoke the 'check' script using
its full source tree path while still using a split source and build
tree layout. This would be a typical situation with meson if you ask
it to find the 'check' script path using files('check').

Rather than trying to make the logic more magical, add support for
explicitly passing the dirs using --source-dir and --build-dir. If
either is omitted the current logic is maintained.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-19-alex.bennee@linaro.org>

tests/vm: custom openbsd partitioning to increase /home space

The openbsd image is 20GB in size, but the automatic partitioning
done by the installer leaves /home with a mere ~3.5 GB of space,
wasting free space across many other partitions that are not
used by our build process:

openbsd$ df
Filesystem  512-blocks      Used     Avail Capacity  Mounted on
/dev/sd0a      1229692    213592    954616    18%    /
/dev/sd0k      7672220        40   7288572     0%    /home
/dev/sd0d      1736604        24   1649752     0%    /tmp
/dev/sd0f      4847676   2505124   2100172    54%    /usr
/dev/sd0g      1326684    555656    704696    44%    /usr/X11R6
/dev/sd0h      4845436   1445932   3157236    31%    /usr/local
/dev/sd0j     10898972         4  10354020     0%    /usr/obj
/dev/sd0i      3343644         4   3176460     0%    /usr/src
/dev/sd0e      2601212     19840   2451312     1%    /var

This change tells the installer todo custom partitioning with
4 GB on /, 256 MB swap, and the remaining ~15GB for /home

openbsd$ df
Filesystem  512-blocks      Used     Avail Capacity  Mounted on
/dev/sd0a      7932412   4740204   2795588    63%    /
/dev/sd0d     32164636        40  30556368     0%    /home

This will avoid ENOSPC failures when tests that need to create
big files (disk images) run in parallel.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230322123639.836104-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

tests/vm: skip X11 in openbsd installation

As a VM used only for automated testing there is no need to
install the X11 stack.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230322123639.836104-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

include/qemu/plugin: Inline qemu_plugin_disable_mem_helpers

Now that we've broken the include loop with cpu.h,
we can bring this inline.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-8-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-18-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>

include/qemu: Split out plugin-event.h

The usage in hw/core/cpu.h only requires QEMU_PLUGIN_EV_MAX.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-7-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-17-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>

*: Add missing includes of qemu/plugin.h

This had been pulled in from hw/core/cpu.h,
but that will be removed.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-6-richard.henderson@linaro.org>
[AJB: also syscall-trace.h]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-16-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>

*: Add missing includes of qemu/error-report.h

This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>

include/qemu/plugin: Remove QEMU_PLUGIN_ASSERT

This macro is no longer used.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-4-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-14-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>

tcg: Drop plugin_gen_disable_mem_helpers from tcg_gen_exit_tb

Now that we call qemu_plugin_disable_mem_helpers in cpu_tb_exec,
we don't need to do this in generated code as well.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-3-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-13-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>

tcg: Clear plugin_mem_cbs on TB exit

Do this in cpu_tb_exec (normal exit) and cpu_loop_exit (exception),
adjacent to where we reset can_do_io.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1381
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-2-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-12-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>

tests/avocado: don't use tags to define drive

We are abusing the avocado tags which are intended to provide test
selection metadata to provide parameters to our test. This works OK up
until the point you need to have ,'s in the field as this is the tag
separator character which is the case for a number of the drive
parameters. Fix this by making drive a parameter to the common helper
function.

Fixes: 267fe57c23 (tests: add tuxrun baseline test to avocado)
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-11-alex.bennee@linaro.org>

tests/tcg: add some help output for running individual tests

So you can do:

  cd tests/tcg/aarch64-linux-user
  make -f ../Makefile.target help

To see the list of tests. You can then run each one individually.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-8-alex.bennee@linaro.org>

include/qemu: add documentation for memory callbacks

Some API documentation was missed, rectify that.

Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1497
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-7-alex.bennee@linaro.org>

gitlab: update centos-8-stream job

A couple of clean-ups here:

  - inherit from the custom runners job for artefacts
  - call check-avocado directly
  - add some comments to the top about setup

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-6-alex.bennee@linaro.org>

scripts/ci: update gitlab-runner playbook to handle CentOS

This was broken when we moved to using the pre-built packages as we
didn't take care to ensure we used RPMs where required.

NB: I could never get this to complete on my test setup but I suspect
this was down to network connectivity and timeouts while downloading.

Fixes: 69c4befba1 (scripts/ci: update gitlab-runner playbook to use latest runner)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-5-alex.bennee@linaro.org>

scripts/ci: add libslirp-devel to build-environment

Without libslip enabled we won't have user networking which means the
KVM tests won't run.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-4-alex.bennee@linaro.org>

tests/docker: all add DOCKER_BUILDKIT to RUNC environment

It seems we also need to pass DOCKER_BUILDKIT as an argument to docker
itself to get the full benefit of caching.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-3-alex.bennee@linaro.org>

tests/avocado: re-factor igb test to avoid timeouts

The core of the test was utilising "ethtool -t eth1 offline" to run
through a test sequence. For reasons unknown the test hangs under some
configurations of the build on centos8-stream. Fundamentally running
the old fedora-31 cloud-init is just too much for something that is
directed at testing one device. So we:

  - replace fedora with a custom kernel + buildroot rootfs
  - rename the test from IGB to NetDevEthtool
  - re-factor the common code, add (currently skipped) tests for other
     devices which support ethtool
  - remove the KVM limitation as its fast enough to run in KVM or TCG

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230322145529.4079753-1-alex.bennee@linaro.org>

tests/avocado: probe for multi-process support before running test

A recent attempt to let avocado run more tests on the CentOS stream
build failed because there was no gating on the multiprocess feature.
Like missing accelerators avocado should gracefully skip when the
feature is not enabled.

In this case we use the existence of the proxy device as a proxy for
multi-process support.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: John G Johnson <john.g.johnson@oracle.com>
Message-Id: <20230321111752.2681128-1-alex.bennee@linaro.org>

tests/avocado: update AArch64 tests to Alpine 3.17.2

To test Alpine boot on SBSA-Ref target we need Alpine Linux
'standard' image as 'virt' one lacks kernel modules.

So to minimalize Avocado cache I move test to 'standard' image.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302191146.1790560-1-marcin.juszkiewicz@linaro.org>
Message-Id: <20230315174331.2959-2-alex.bennee@linaro.org>

Update version for v8.0.0-rc1 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-target-arm-20230321' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * contrib/elf2dmp: Support Windows Server 2022
 * hw/char/cadence_uart: Fix guards on invalid BRGR/BDIV settings
 * target/arm: Add Neoverse-N1 IMPDEF registers
 * hw/usb/imx: Fix out of bounds access in imx_usbphy_read()
 * docs/system/arm/cpu-features.rst: Fix formatting
 * target/arm: Don't advertise aarch64-pauth.xml to gdb

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmQZrwQZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3gmFD/9Ib/G7f21IQkhi0d0MoJeQ
# 529QbzHbXH272OvO2zFdev98o6EVbbeGzGqgaa0lv6OASwvNUIFVJAwZUX6Bb756
# dJ9k5aS2249SGQ8AzM65bCL4HxSVFan5+t9P890SyQk3zIzzQtSVjci/K2P2cFx1
# bKzbCZys/qjZgncPaPeuc9irkmAKlqc9UwqgUV3xvhBAfq1eFHk/bVIhcTVxNwUy
# quCYOt1GwtsOKn+nUcKclOcmBb7diCu6iFCGlO7XF9Rjaa+egW3OhUnGqUFROsdu
# j4drjeQT8gWY92m8PlnsZb0YUeefAwD7iVZGIAEp3G+9GEXdOvotrQVKtMLMZkq0
# /YInUjYAFu1w7DqhelvSYGVoVioP13HxsFWpmKNYNSJIHtS7QCfmHfUBPQnWjHD5
# XUO/K7vbsp69yi/rDDoHvQ3sqxJUuiF1Wuyj+hRK1JXRhLkRL+tBE7urlqqoJ1wH
# 0vL6oNj5GdvNJssIkb7yXx72irgAUu8XTC7bEvGCVfaylmei3SsS35qQmGePzO/z
# ok7WePQ/tM/FJ8JLVTXur9YsG7EqMROdszQRE4Yla3NE6BOr7HCCj7ZdCfy5SXL4
# IlZ69UELcYghcfIDRrRLXDSdfs98voRxIRDHy0rz64hUHlLBOnfqw/dcHvZBAB09
# CV7QPcDOR87jY228DT4EzA==
# =D7pq
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Mar 2023 13:20:04 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20230321' of https://git.linaro.org/people/pmaydell/qemu-arm:
  target/arm: Don't advertise aarch64-pauth.xml to gdb
  docs/system/arm/cpu-features.rst: Fix formatting
  hw/usb/imx: Fix out of bounds access in imx_usbphy_read()
  contrib/elf2dmp: add PE name check and Windows Server 2022 support
  contrib/elf2dmp: move PE dir search to pe_get_data_dir_entry
  contrib/elf2dmp: fix code style
  hw/char/cadence_uart: Fix guards on invalid BRGR/BDIV settings
  target/arm: Add Neoverse-N1 registers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Don't advertise aarch64-pauth.xml to gdb

Unfortunately a bug in older versions of gdb means that they will
crash if QEMU sends them the aarch64-pauth.xml.  This bug is fixed in
gdb commit 1ba3a3222039eb25, and there are plans to backport that to
affected gdb release branches, but since the bug affects gdb 9
through 12 it is very widely deployed (for instance by distros).

It is not currently clear what the best way to deal with this is; it
has been proposed to define a new XML feature name that old gdb will
ignore but newer gdb can handle.  Since QEMU's 8.0 release is
imminent and at least one of our CI runners is now falling over this,
disable the pauth XML for the moment.  We can follow up with a more
considered fix either in time for 8.0 or else for the 8.1 release.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs/system/arm/cpu-features.rst: Fix formatting

The markup for the Arm CPU feature documentation is incorrect,
and results in the HTML not rendering correctly -- the first
line of each description is rendered in boldface as if it
were part of the option name.

Reformat to match the styling used in cpu-models-x86.rst.inc.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1479
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230316105808.1414003-1-peter.maydell@linaro.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>

hw/usb/imx: Fix out of bounds access in imx_usbphy_read()

The i.MX USB Phy driver does not check register ranges, resulting in out of
bounds accesses if an attempt is made to access non-existing PHY registers.
Add range check and conditionally report bad accesses to fix the problem.

While at it, also conditionally log attempted writes to non-existing or
read-only registers.

Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Message-id: 20230316234926.208874-1-linux@roeck-us.net
Link: https://gitlab.com/qemu-project/qemu/-/issues/1408
Fixes: 0701a5efa015 ("hw/usb: Add basic i.MX USB Phy support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

contrib/elf2dmp: add PE name check and Windows Server 2022 support

Since its inception elf2dmp has checked MZ signatures within an
address space above IDT[0] interrupt vector and took first PE image
found as Windows Kernel.
But in Windows Server 2022 memory dump this address space range is
full of invalid PE fragments and the tool must check that PE image
is 'ntoskrnl.exe' actually.
So, introduce additional validation by checking image name from
Export Directory against 'ntoskrnl.exe'.

Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Tested-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Annie Li <annie.li@oracle.com>
Message-id: 20230222211246.883679-4-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

contrib/elf2dmp: move PE dir search to pe_get_data_dir_entry

Move out PE directory search functionality to be reused not only
for Debug Directory processing but for arbitrary PE directory.

Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Annie Li <annie.li@oracle.com>
Message-id: 20230222211246.883679-3-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

contrib/elf2dmp: fix code style

Originally elf2dmp were added with some code style issues,
especially in pe.h header, and some were introduced by
2d0fc797faaa73fbc1d30f5f9e90407bf3dd93f0. Fix them now.

Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
Reviewed-by: Annie Li <annie.li@oracle.com>
Message-id: 20230222211246.883679-2-viktor@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/char/cadence_uart: Fix guards on invalid BRGR/BDIV settings

The cadence UART attempts to avoid allowing the guest to set invalid
baud rate register values in the uart_write() function.  However it
does the "mask to the size of the register field" and "check for
invalid values" in the wrong order, which means that a malicious
guest can get a bogus value into the register by setting also some
high bits in the value, and cause QEMU to crash by division-by-zero.

Do the mask before the bounds check instead of afterwards.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1493
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Message-id: 20230314170804.1196232-1-peter.maydell@linaro.org

target/arm: Add Neoverse-N1 registers

Add implementation defined registers for neoverse-n1 which
would be accessed by TF-A. Since there is no DSU in Qemu,
CPUCFR_EL1.SCU bit is set to 1 to avoid DSU registers definition.

Signed-off-by: Chen Baozi <chenbaozi@phytium.com.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230313033936.585669-1-chenbaozi@phytium.com.cn
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging

ui/ fixes for 8.0

# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmQZcpUcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5VI/D/48GzUBrNuA8lep7/K4
# Mw1Ec7X3nn6KZbHsbvCASJuMH3wKYKZJS4JQuXvpHLxpDnzycYKpbrdEG8WrNo50
# 7tmahsZfA7rs5U3GToBgSdsTUlruvUoU4ycWLKfOJD0A47jaLprAFsBWvY3cYVO6
# 37EzCdzgV+FA/btaceNwdANItIGGUNPyXKSAdOebyDRD/3J4zTgSh3eG4ux86hzf
# P5Vo/m/hsqLc3S+M840XBABPitrmo+P7kS8NP8a5uifyE+bAbTBVV8WypMXK3lcX
# GMZh4LTfUPaABqBAhGZh/Bf3wOJ7P4w8+AXiMLBbxTYQmmSwwLZ0kwVcEIhrw7tK
# 8TLLz1hrVC88KQLCJ5m99w4xa0DEFZIwh6qEaStA+/TeJR02k49HpWiWkwa/yn55
# qRjaPV9mMhGaNCD9+E2ipX0krx6f03/TqE70IpyhDKuvQbjPv/4Q48gvF7R9IcuI
# mK45CAakudRjGE+2ZygGRvJQnZ/rRQX/spCbipOtd9Ay9yWFyrXj9zbkb97OUe6G
# 5HhhcfWAKXmRKh/V+xFIyBpN30XJwMxn6UJVacQwDRZamJMMmVi0rvZ7L1zhjbq5
# ZBjY6mZhufDk8YUTZiLz3BzDPcw+PWjkaGetFeoVkY7YDHajo0P5c3o23XJvberI
# 8Gaz61t7YB5uXq9WxKjyoRE23A==
# =npHn
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Mar 2023 09:02:13 GMT
# gpg:                using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg:                issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
  ui: fix crash on serial reset, during init
  ui/sdl2: remove workaround forcing x11
  ui: return the default console cursor when con == NULL
  ui/gtk: fix cursor moved to left corner
  ui/dbus: fix passing SOCKET to GSocket API & leak
  ui/spice: fix SOCKET handling regression
  win32: add qemu_close_socket_osfhandle()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ui: fix crash on serial reset, during init

For ex, when resetting the xlnx-zcu102 machine:

(lldb) bt
* thread #1, queue = 'com.apple.main-thread', stop reason =
EXC_BAD_ACCESS (code=1, address=0x50)
   * frame #0: 0x10020a740 gd_vc_send_chars(vc=0x000000000) at
gtk.c:1759:41 [opt]
     frame #1: 0x100636264 qemu_chr_fe_accept_input(be=<unavailable>) at
char-fe.c:159:9 [opt]
     frame #2: 0x1000608e0 cadence_uart_reset_hold [inlined]
uart_rx_reset(s=0x10810a960) at cadence_uart.c:158:5 [opt]
     frame #3: 0x1000608d4 cadence_uart_reset_hold(obj=0x10810a960) at
cadence_uart.c:530:5 [opt]
     frame #4: 0x100580ab4 resettable_phase_hold(obj=0x10810a960,
opaque=0x000000000, type=<unavailable>) at resettable.c:0 [opt]
     frame #5: 0x10057d1b0 bus_reset_child_foreach(obj=<unavailable>,
cb=(resettable_phase_hold at resettable.c:162), opaque=0x000000000,
type=RESET_TYPE_COLD) at bus.c:97:13 [opt]
     frame #6: 0x1005809f8 resettable_phase_hold [inlined]
resettable_child_foreach(rc=0x000060000332d2c0, obj=0x0000600002c1c180,
cb=<unavailable>, opaque=0x000000000, type=RESET_TYPE_COLD) at
resettable.c:96:9 [opt]
     frame #7: 0x1005809d8 resettable_phase_hold(obj=0x0000600002c1c180,
opaque=0x000000000, type=RESET_TYPE_COLD) at resettable.c:173:5 [opt]
     frame #8: 0x1005803a0
resettable_assert_reset(obj=0x0000600002c1c180, type=<unavailable>) at
resettable.c:60:5 [opt]
     frame #9: 0x10058027c resettable_reset(obj=0x0000600002c1c180,
type=RESET_TYPE_COLD) at resettable.c:45:5 [opt]

While the chardev is created early, the VirtualConsole is associated
after, during qemu_init_displays().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230220072251.3385878-1-marcandre.lureau@redhat.com>

ui/sdl2: remove workaround forcing x11

This workaround was put in place in the original implementation almost
10 years ago, considering a very old SDL2 version. Currently it prevents
users to run in a wayland-only environment without manually forcing the
backend.
The SDL2 wayland backend has been supported by distributions for a very
long time (e.g. in Fedora, first available 8 years ago), and is now
considered stable and becoming the default for new SDL2 releases.
Instead of requiring the x11 backend to exist by default, let new qemu
releases run with the default chosen by the installed SDL2 version.

Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230301141205.514338-1-ernunes@redhat.com>

ui: return the default console cursor when con == NULL

VNC code relies on con==NULL to mean the default console.

Fixes:
https://gitlab.com/qemu-project/qemu/-/issues/1548

Fixes: commit 385ac97f8 ("ui: keep current cursor with QemuConsole")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reported-by: Helge Konetzka <hk@zapateado.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230319111017.1319880-1-marcandre.lureau@redhat.com>

ui/gtk: fix cursor moved to left corner

Do not attempt to move the pointer if the widget is not yet realized.
The mouse cursor is placed to the corner of the screen, on X11 at least,
as x_root and y_root are then miscalculated. (this is not reproducible
on Wayland, because Gtk doesn't implement device warping there)

This also fixes the following warning at start:
qemu: Gdk: gdk_window_get_root_coords: assertion 'GDK_IS_WINDOW (window)' failed

Fixes: 6effaa16ac98 ("ui: set cursor position upon listener
registration")
Reported-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230320132624.1612464-1-marcandre.lureau@redhat.com>

ui/dbus: fix passing SOCKET to GSocket API & leak

-display dbus is not currently available to win32 users, so it's not
considered a regression.

Note also the close() leak fix in case of error.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230320133643.1618437-4-marcandre.lureau@redhat.com>

ui/spice: fix SOCKET handling regression

Spice uses SOCKET on win32, but QEMU now uses file-descriptors.

Fixes "8.0.0rc0 Regression: spicy windows doesn't open":
https://gitlab.com/qemu-project/qemu/-/issues/1549

Fixes: commit abe34282b ("win32: avoid mixing SOCKET and file descriptor space")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230320133643.1618437-3-marcandre.lureau@redhat.com>

win32: add qemu_close_socket_osfhandle()

Close the given file descriptor, but returns the underlying SOCKET.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230320133643.1618437-2-marcandre.lureau@redhat.com>

Merge tag 'edk2-stable202302-20230320-pull-request' of https://gitlab.com/kraxel/qemu into staging

update edk2 to 202302 stable tag

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmQYKWwACgkQTLbY7tPo
# cTinlA/9EVWaAyb7UV56My5Zbo41okXev8xmZV8R0G2xAbGaM22v/mPZaifA9Iqn
# JG19Go4xzTmX12Ttg/Def30Bu2RcjHfHccYycUQ7brd40rS8Gc2QYZX4p9NltUda
# dJOMB4e+7MKkavCrqfiHB6LWGMk27cT5puvMkmt65+/WsoBV1gcc0SmFK8tWIM3N
# dZqGdPr9ml72+fv7Cf7crShGEfwV/d3LkJ30Zccq0mbS08QcLm1SbyIB2+SdCyrE
# 35okXRJePACdh7rOWQgWrYAy1CTb54Vup7Fraq0a9NjfknKoQBxWt0w1L95d3p0d
# i8j0Yl1G5rD+Ybqvz/KgDLVNpKddttpkD1CECfZynOioHvwXWODrcJCKF9xsXcRR
# 9Lmeq090ottEbrYXln/clAjwNnF5ALNMEdvmOBZnFBG1H1bxTMI7VwWZEwRBQ5nu
# qtJf11oxuF9Lsi8OzIFcWx0hHkUmIrjCvnyNrVdxoMVPHcXXz1yD8MVV8vgg4jcL
# Fs/s9h62ymv0n3L0OYbgCfXgVWgomcgAkWfHcv+k8sEyzRa2v2wQ9zyVMnjelNkJ
# i/YEn+dupaZ20a6cLoYGQGBOACJ3iHyd1wZ0XzwSYYMq50X/ESRXAo5XofCAhzuz
# 5LQ3VgzQevFOuRwwqjnAwaZHt5M6Ysj0V28iYpMBJDsk+sMP5nM=
# =7oxT
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 20 Mar 2023 09:37:48 GMT
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* tag 'edk2-stable202302-20230320-pull-request' of https://gitlab.com/kraxel/qemu:
  edk2: update firmware binaries
  edk2: replace build scripts
  edk2: update submodule to edk2-stable202302
  acpi: disable tests/data/acpi updates
  bios-tables-test: use 128M numa nodes on aarch64
  acpi: enable tests/data/acpi updates

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge tag 'pull-request-2023-03-20' of https://gitlab.com/thuth/qemu into staging

* Mark Nios II as orphan
* Many s390x emulation fixes
* Disable flaky complete_in_standby blockjob unit test
* White space cleanups in various files

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmQYVEoRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWu/A//QdVG7wS66lhdkPPu/GN+eDNaNsTzPPZd
# YwH0bpy2YoopInwa1ggZ1zPatmbSOVUcKjUfNYLcQzUBQnmeFtpuAF+4IGDhYfa+
# agkjWvmrCrIww4Wn+OLdLReW1+GtRlKZKu7xbYKkeLyqr9SHUD2lNUZ5RXj2t9Lw
# BXkPDXkMFqfVDzHtAxyXL7Z7yk3UTnZKBjDxiwE3tZ4S+N4r7m/TvNHiopI2bTVg
# JeDTxN40ylbOlBfOLC/qhlLUVnyBsDalIfKffIdLZ5Qn+FnKfZhkt9km4i7OL+ZX
# 1wKnTh/J8OCYqHOyhJdZGT8QxZH79qDm12/nKXzIQkxtJoKuz6Fm5FY3ZJNrb+IJ
# ybxSpAFBJB/8sUjbzl8ZjGxbZecIyEBKT518+oBoqjNcy3n8/m2BhBFr6f6F4cJC
# kdTnRS0XYKGLbJLz0+VBARE7hoHNckYsup/DGscppyYKNA6rFXbq/MI3+oMGAnPw
# Ua/+gXU/hwq8TPg97A7O0hS4TKSKMtdZFEDmAGzkejVHvm/3BvcYrVoKDljnUAQV
# SaERp/Elefbt3EufkuZp77AwLU8RcEFscitEIACmLbmwm3aKpqS+R2u1EJ4ZcoFT
# dHUBkokXW1/i+FtNRmjEKV9z398cNYXGEDLPfMnFbknHwbS53pqeQqqlvUidltGk
# LWviyiqKihk=
# =tYCc
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 20 Mar 2023 12:40:42 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2023-03-20' of https://gitlab.com/thuth/qemu: (24 commits)
  replace TABs with spaces
  qemu/osdep: Switch position of "extern" and "G_NORETURN"
  tests/unit/test-blockjob: Disable complete_in_standby test
  target/s390x/tcg/mem_helper: Remove bad assert() statement
  tests/tcg/s390x: Test unaligned accesses
  target/s390x: Update do_unaligned_access() comment
  target/s390x: Handle STGRL to non-aligned addresses
  target/s390x: Handle STRL to non-aligned addresses
  target/s390x: Handle CLRL and CLGFRL with non-aligned addresses
  target/s390x: Handle CGRL and CLGRL with non-aligned addresses
  target/s390x: Handle CRL and CGFRL with non-aligned addresses
  target/s390x: Handle LLGFRL from non-aligned addresses
  target/s390x: Handle LRL and LGFRL from non-aligned addresses
  target/s390x: Handle LGRL from non-aligned addresses
  target/s390x: Handle EXECUTE of odd addresses
  target/s390x: Handle branching to odd addresses
  tests/tcg/s390x: Add ex-relative-long.c
  target/s390x: Fix EXECUTE of relative long instructions
  tests/tcg/s390x: Add rxsbg.c
  target/s390x: Fix R[NOX]SBG with T=1
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

replace TABs with spaces

Bring the files in line with the QEMU coding style, with spaces
for indentation.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/378
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315032649.57568-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

qemu/osdep: Switch position of "extern" and "G_NORETURN"

Fixes the Windows build under msys2 using GCC 12 which fails with the following
error:

  [184/579] Compiling C++ object qga/vss-win32/qga-vss.dll.p/install.cpp.obj
  FAILED: qga/vss-win32/qga-vss.dll.p/install.cpp.obj
  "c++" "-m64" "-mcx16" "-Iqga/vss-win32/qga-vss.dll.p" "-Iqga/vss-win32" "-I../src/qga/vss-win32" "-I." "-Iqapi" "-Itrace" "-Iui" "-Iui/shader" "-IC:/msys64/mingw64/include/glib-2.0" "-IC:/msys64/mingw64/lib/glib-2.0/include" "-fdiagnostics-color=auto" "-Wall" "-Winvalid-pch" "-Wnon-virtual-dtor" "-Werror" "-std=gnu++11" "-g" "-iquote" "." "-iquote" "C:/msys64/home/shentey/Projects/qemu/src" "-iquote" "C:/msys64/home/shentey/Projects/qemu/src/include" "-iquote" "C:/msys64/home/shentey/Projects/qemu/src/tcg/i386" "-D__STDC_LIMIT_MACROS" "-D__STDC_CONSTANT_MACROS" "-D__STDC_FORMAT_MACROS" "-fno-pie" "-no-pie" "-D_GNU_SOURCE" "-D_FILE_OFFSET_BITS=64" "-D_LARGEFILE_SOURCE" "-fno-strict-aliasing" "-fno-common" "-fwrapv" "-Wundef" "-Wwrite-strings" "-Wtype-limits" "-Wformat-security" "-Wformat-y2k" "-Winit-self" "-Wignored-qualifiers" "-Wempty-body" "-Wendif-labels" "-Wexpansion-to-defined" "-Wimplicit-fallthrough=2" "-Wmissing-format-attribute" "-Wno-missing-include-dirs" "-Wno-shift-negative-value" "-Wno-psabi" "-fstack-protector-strong" "-Wno-unknown-pragmas" "-Wno-delete-non-virtual-dtor" "-Wno-non-virtual-dtor" -MD -MQ qga/vss-win32/qga-vss.dll.p/install.cpp.obj -MF "qga/vss-win32/qga-vss.dll.p/install.cpp.obj.d" -o qga/vss-win32/qga-vss.dll.p/install.cpp.obj "-c" ../src/qga/vss-win32/install.cpp
  In file included from C:/msys64/mingw64/lib/glib-2.0/include/glibconfig.h:9,
              from C:/msys64/mingw64/include/glib-2.0/glib/gtypes.h:34,
              from C:/msys64/mingw64/include/glib-2.0/glib/galloca.h:34,
              from C:/msys64/mingw64/include/glib-2.0/glib.h:32,
              from C:/msys64/home/shentey/Projects/qemu/src/include/glib-compat.h:32,
              from C:/msys64/home/shentey/Projects/qemu/src/include/qemu/osdep.h:144,
              from ../src/qga/vss-win32/install.cpp:13:
  C:/msys64/mingw64/include/glib-2.0/glib/gmacros.h:1075:21: error: standard attributes in middle of decl-specifiers
  1075 | # define G_NORETURN [[noreturn]]
        |                     ^
  C:/msys64/home/shentey/Projects/qemu/src/include/qemu/osdep.h:240:8: note: in expansion of macro 'G_NORETURN'
  240 | extern G_NORETURN
        |        ^~~~~~~~~~
  C:/msys64/mingw64/include/glib-2.0/glib/gmacros.h:1075:21: note: standard attributes must precede the decl-specifiers to apply to the declaration, or follow them to apply to the type
  1075 | # define G_NORETURN [[noreturn]]
        |                     ^
  C:/msys64/home/shentey/Projects/qemu/src/include/qemu/osdep.h:240:8: note: in expansion of macro 'G_NORETURN'
  240 | extern G_NORETURN
        |        ^~~~~~~~~~
  C:/msys64/mingw64/include/glib-2.0/glib/gmacros.h:1075:21: error: attribute ignored [-Werror=attributes]
  1075 | # define G_NORETURN [[noreturn]]
        |                     ^
  C:/msys64/home/shentey/Projects/qemu/src/include/qemu/osdep.h:240:8: note: in expansion of macro 'G_NORETURN'
  240 | extern G_NORETURN
        |        ^~~~~~~~~~
  C:/msys64/mingw64/include/glib-2.0/glib/gmacros.h:1075:21: note: an attribute that appertains to a type-specifier is ignored
  1075 | # define G_NORETURN [[noreturn]]
        |                     ^
  C:/msys64/home/shentey/Projects/qemu/src/include/qemu/osdep.h:240:8: note: in expansion of macro 'G_NORETURN'
  240 | extern G_NORETURN
        |        ^~~~~~~~~~
  cc1plus.exe: all warnings being treated as errors

Apparently it also fixes the compilation with Clang 15 (see
https://gitlab.com/qemu-project/qemu/-/issues/1541 ).

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1541
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230318185931.181659-1-shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/unit/test-blockjob: Disable complete_in_standby test

The blockjob/complete_in_standby test is flaky and fails
intermittently in CI:

172/621 qemu:unit / test-blockjob
           ERROR           0.26s   killed by signal 6 SIGABRT
11:03:46 MALLOC_PERTURB_=176
G_TEST_SRCDIR=/Users/pm215/src/qemu-for-merges/tests/unit
G_TEST_BUILDDIR=/Users/pm215/src/qemu-for-merges/build/all/tests/unit
/Users/pm215/src/qemu-for-merges/build/all/tests/unit/test-blockjob
--tap -k
----------------------------------- output -----------------------------------
stdout:
# random seed: R02S8c79d6e1c01ce0b25475b2210a253242
1..9
# Start of blockjob tests
ok 1 /blockjob/ids
stderr:
Assertion failed: (job->status == JOB_STATUS_STANDBY), function
test_complete_in_standby, file ../../tests/unit/test-blockjob.c, line
499.

Seen on macOS/x86_64, FreeBSD 13/x86_64, msys2-64bit, eg:

https://gitlab.com/qemu-project/qemu/-/jobs/3872508803
https://gitlab.com/qemu-project/qemu/-/jobs/3950667240

Disable this subtest until somebody has time to investigate.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317143534.1481947-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x/tcg/mem_helper: Remove bad assert() statement

The "assert(!nonfault)" statement can be triggered by running the
"mvpg" s390x kvm-unit-test with TCG. According to Richard: "... the
assert looks backward. We should only arrive there if nonfault was
true for the probe (otherwise the probe would have raised the
exception directly).  I would think we could just remove the assert."

Fixes: 4049431478 ("target/s390x: Fix s390_probe_access for user-only")
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230317135737.597570-1-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

edk2: update firmware binaries

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

edk2: replace build scripts

Remove Makefile.edk2 and the edk2*.sh scripts and replace them
with a python script (which already handles fedora rpm builds)
and a config file for it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

edk2: update submodule to edk2-stable202302

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

acpi: disable tests/data/acpi updates

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

bios-tables-test: use 128M numa nodes on aarch64

Recent edk2 versions don't boot with very small numa nodes.
Bump the size from 64M to 128M.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

acpi: enable tests/data/acpi updates

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

tests/tcg/s390x: Test unaligned accesses

Add a number of small test that check whether accessing unaligned
addresses in various ways leads to a specification exception.

Run these test both in softmmu and user configurations; expect a PGM
in one case and SIGILL in the other.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230316164428.275147-13-iii@linux.ibm.com>
[thuth: Added -Wl,--build-id=none to LDFLAGS]
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Update do_unaligned_access() comment

Relative long instructions now depend on do_unaligned_access() too.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230316164428.275147-12-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Handle STGRL to non-aligned addresses

Use MO_ALIGN and let do_unaligned_access() generate a specification
exception.

Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230316164428.275147-11-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Handle STRL to non-aligned addresses

Use MO_ALIGN and let do_unaligned_access() generate a specification
exception.

Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230316164428.275147-10-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Handle CLRL and CLGFRL with non-aligned addresses

Use MO_ALIGN and let do_unaligned_access() generate a specification
exception.

Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230316164428.275147-9-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Handle CGRL and CLGRL with non-aligned addresses

Use MO_ALIGN and let do_unaligned_access() generate a specification
exception.

Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230316164428.275147-8-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Handle CRL and CGFRL with non-aligned addresses

Use MO_ALIGN and let do_unaligned_access() generate a specification
exception.

Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230316164428.275147-7-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Handle LLGFRL from non-aligned addresses

Use MO_ALIGN and let do_unaligned_access() generate a specification
exception.

Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230316164428.275147-6-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Handle LRL and LGFRL from non-aligned addresses

Use MO_ALIGN and let do_unaligned_access() generate a specification
exception.

Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230316164428.275147-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/s390x: Handle LGRL from non-aligned addresses

Use MO_ALIGN and let do_unaligned_access() generate a specification
exception.

Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230316164428.275147-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>