OSDN Git Service
Joonyoung Shim [Fri, 14 Nov 2014 02:36:02 +0000 (11:36 +0900)]
drm/exynos: add has_vtsel flag
The exynos fimd provides video type selection bits from system register
but exynos3 series don't has it, so needs has_vtsel flag and we can
distinguish whether set video type selection bits.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Krzysztof Kozlowski [Fri, 7 Nov 2014 13:53:58 +0000 (14:53 +0100)]
drm/exynos: Fix DSI resuming fail because power domain being off
During system resume from suspend to RAM the Exynos DRM driver forced
CRTC mode thus turning display on (DPMS_ON). This lead to runtime resuming
of DSI which failed because whole LCD power domain was off and it was
not allowed to turn on because of system resume in progress.
Forcing mode should not be needed and removing it solves this particular
problem.
This necessary fix for following scenario reproduced on Exynos DRM:
1. Power domain is off before suspending the system.
2. System is suspended to RAM.
3. Resuming starts. The Exynos DRM driver resume callback is called.
4. The Exynos DRM driver calls drm_helper_resume_force_mode() which turns
on the screen by calling exynos_dsi_dpms with DRM_MODE_DPMS_ON.
5. The Exynos DSI driver calls pm_runtime_get. The driver runtime
resumes and this should turn LCD power domain on.
6. Unfortunately the domain cannot be turned on because system resume is
in progress and genpd->prepared_count is positive.
Steps to reproduce:
1. Add runtime PM to Exynos DSI driver.
2. Build Exynos DRM/FB without FRAMEBUFFER_CONSOLE.
3. Enable the connector and screen (e.g. with modeset-vsync).
4. echo 3 > /sys/devices/platform/exynos-drm/graphics/fb0/blank
5. echo mem > /sys/power/state
6. Resume.
[ 77.712469] PM: early resume of devices complete after 3.854 msecs
[ 77.712739] exynos-dsi
11c80000.dsi: pm_genpd_resume()
[ 77.712758] exynos4-fimc
11800000.fimc: pm_genpd_resume()
[ 77.712774] exynos4-fimc
11810000.fimc: pm_genpd_resume()
[ 77.712787] exynos-drm-fimc
11820000.fimc: pm_genpd_resume()
[ 77.712802] exynos-drm-fimc
11830000.fimc: pm_genpd_resume()
[ 77.712815] s5p-mipi-csis
11880000.csis: pm_genpd_resume()
[ 77.712829] s5p-mipi-csis
11890000.csis: pm_genpd_resume()
[ 77.712843] exynos-fimc-lite
12390000.fimc-lite: pm_genpd_resume()
[ 77.712856] exynos-fimc-lite
123a0000.fimc-lite: pm_genpd_resume()
[ 77.713788] exynos4-fb
11c00000.fimd: pm_genpd_resume()
[ 77.713912] wake disabled for irq 184
[ 77.713923] wake disabled for irq 185
[ 77.714082] wake disabled for irq 173
[ 77.715676] wake disabled for irq 176
[ 77.718540] exynos4-fb
11c00000.fimd: pm_genpd_runtime_resume()
[ 77.718567] exynos4-fb
11c00000.fimd: state restore latency exceeded, new value 1708 ns
[ 77.718636] exynos-dsi
11c80000.dsi: pm_genpd_runtime_resume()
[ 77.892366] exynos-dsi
11c80000.dsi: PLL failed to stabilize
[ 77.892377] exynos-dsi
11c80000.dsi: failed to configure DSI PLL
[ 78.192168] exynos-dsi
11c80000.dsi: timeout waiting for reset
[ 78.211578] exynos-dsi
11c80000.dsi: waiting for bus lanes timed out
[ 78.307173] exynos-dsi
11c80000.dsi: xfer timed out: d1 00 (null)
[ 78.307190] panel_s6e8aa0
11c80000.dsi.0: error -110 reading dcs seq(0xd1)
[ 78.307199] panel_s6e8aa0
11c80000.dsi.0: read id failed
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Wed, 1 Oct 2014 06:19:13 +0000 (15:19 +0900)]
drm/exynos: dsi: move DSIM_STATE_ENABLED set position
The command mode panel should draw image earlier than the display
on command execution to prevent showing garbage GRAM screen data.
So should set dsi->state as DSIM_STATE_ENABLED between calling
exynos_dsi_set_display_enable() and drm_panel_enable() to transmit
image data before executing display on command.
And moves the display on command execution routine from prepare()
to enable() in drm_panel_funcs also.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Wed, 1 Oct 2014 06:19:10 +0000 (15:19 +0900)]
drm/exynos: fimd: move handle vblank position in TE handler
For providing VBLANK information, drm_handle_vblank() should
be called properly, but it is blocked by wait_vsync_event
condition which is set by manager_ops->wait_for_vblank().
So moves it out from wait_vsync_event routine.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Wed, 1 Oct 2014 06:19:07 +0000 (15:19 +0900)]
drm/exynos: fimd: remove unnecessary waiting vblank routine
The exynos_drm_crtc_dpms() waits until pended page flip
queue is empty, calls the drm_vblank_off() then calls
manager->ops->dpms() when mode is DRM_MODE_DPMS_OFF.
The fimd_dpms() is one of manager->ops->dpms()s and
finally calls fimd_window_suspend().
But there is no active window and vblank is already off
when it is called.
So addtional waiting vblank is not necessary any more.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Fri, 7 Nov 2014 06:12:25 +0000 (15:12 +0900)]
drm/exynos: fimd: support Exynos4415 SoC
This patch supports Exynos4415 SoC.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Fri, 7 Nov 2014 06:12:24 +0000 (15:12 +0900)]
drm/exynos: dsi: support Exynos4415 SoC
This patch supports Exynos4415 SoC.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Vivek Gautam [Wed, 12 Nov 2014 09:42:10 +0000 (15:12 +0530)]
drm/exynos: dp: Remove support for unused dptx-phy
Now that we have moved to generic phy based bindings,
we don't need to have any code related to older dptx-phy.
Nobody is using this dptx-phy anymore, so removing the
same.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Fri, 31 Oct 2014 14:17:43 +0000 (14:17 +0000)]
drm/exynos: remove leftover hdmi function declarations
They are not implemented anywhere, so wipe them out.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Fri, 31 Oct 2014 14:17:42 +0000 (14:17 +0000)]
drm/exynos: update documentation to reflect code changes
Description of the @create_connector callback was missing,
and the @manager was no longer needed.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Thu, 13 Nov 2014 08:25:53 +0000 (17:25 +0900)]
drm/exynos: Save up space using bool var as bitfields
Save a few bytes by compiling them all in the same byte.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Fri, 31 Oct 2014 14:17:40 +0000 (14:17 +0000)]
drm/exynos: remove unused wait_for macro
This is a leftover, all code using this macro have been removed/
changed already.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Thu, 13 Nov 2014 08:24:06 +0000 (17:24 +0900)]
drm/exynos: Replace repeated declarations by #include "exynos_drm_drv.h"
Re-declare struct is not a good practice, let's use the original
drm and exynos declarations.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Fri, 31 Oct 2014 14:17:38 +0000 (14:17 +0000)]
drm/exynos: Replace repeated declaration by include <drm/drmP.h>
Re-declare struct is not a good practice, let's use the original
drm declarations.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Fri, 31 Oct 2014 14:17:37 +0000 (14:17 +0000)]
drm/exynos: remove extra declaration of struct exynos_overlay
The struct is defined in the same file, declare it here is just
unnecessary
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Fri, 31 Oct 2014 14:17:36 +0000 (14:17 +0000)]
drm/exynos: remove extra declaration of struct exynos_drm_manager
The struct is defined in the same file, declare it here is just
unnecessary.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Fri, 31 Oct 2014 14:17:35 +0000 (14:17 +0000)]
drm/exynos: remove uneeded declaration of struct dma_iommu_mapping
It is not even used in this header anymore.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 7 Oct 2014 12:01:11 +0000 (14:01 +0200)]
drm/exynos: dsi: stop using display->ctx pointer
The patch replaces accesses to display->ctx pointer by container_of
construct. It will allow to remove ctx field in the future.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 7 Oct 2014 12:01:10 +0000 (14:01 +0200)]
drm/exynos: dsi: remove redundant encoder field
The patch removes redundant encoder field from private DSI context.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 7 Oct 2014 12:01:09 +0000 (14:01 +0200)]
drm/exynos: dsi: simplify device pointer evaluation
The patch replaces multiple evaluation of device address
with local variable.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Tue, 7 Oct 2014 12:01:08 +0000 (14:01 +0200)]
drm/exynos: dsi: remove global variable exynos_dsi_display
exynos_dsi_display is used by internal Exynos DRM framework for
representing pair encoder->connecter. As it should be mapped 1:1 to dsi
private context it seems more reasonable to embed it directly
in that context. As a result further code simplification will be possible.
Moreover it will be possible to handle multiple DSI devices in the system.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 13 Nov 2014 07:37:57 +0000 (16:37 +0900)]
drm/exynos: remove ifdeferry from initialization code
The patch replaces separate calls to driver (de)registration by
loops over the array of drivers. As a result it significantly
decreases number of ifdefs. Additionally it moves device registration
related ifdefs to header file.
Changelog v2:
- Rebased.
- Consider non kms driver in respect to infinite loop issue.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Thu, 13 Nov 2014 07:05:12 +0000 (16:05 +0900)]
drm/exynos: fix null pointer dereference issue
This patch fixes null pointer dereference issue incurred
when ipp driver is enabled and Exynos drm driver is closed.
Non kms driver should register its own sub driver to setup necessary
resources, which is done by load(). So null pointer dereference
occurs when ipp driver is enabled and Exynos drm driver is closed
because ipp core device is registered after component_master_add_with_match
call.
This patch makes exynos_drm_device_subdrv_probe() to be called after all non
kms drivers are registered.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Fri, 7 Nov 2014 12:32:34 +0000 (21:32 +0900)]
drm/exynos: fix possible infinite loop issue
This patch fixes possible infinite loop issue by postponing
registration to non kms drivers after component_master_add_with_match
call, which can be incurred in all cases that non kms driver is probed
and then component bind is failed
This patch should be applied on top of below patches,
http://comments.gmane.org/gmane.comp.video.dri.devel/117740
http://www.spinics.net/lists/linux-samsung-soc/msg38624.html
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Fri, 7 Nov 2014 11:31:08 +0000 (20:31 +0900)]
drm/exynos: g2d: fix null pointer dereference
This patch fixes a null pointer dereference issue incurred by
calling g2d_remove when exynos_drm_platform_probe is failed.
cmdlist_pool of g2d is allocated when g2d sub driver is probed.
So if exynos_drm_platform_probe is failed, the g2d sub driver is
not probed and the cmdlist_pool is still NULL.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Thu, 6 Nov 2014 14:00:37 +0000 (23:00 +0900)]
drm/exynos: resolve infinite loop issue on non multi-platform
This patch resovles the infinite loop issue incurred
when Exyno drm driver is enabled but all kms drivers
are disabled on Exynos board by returning -EPROBE_DEFER
only in case that there is kms device registered.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Thu, 6 Nov 2014 10:23:35 +0000 (19:23 +0900)]
drm/exynos: resolve infinite loop issue on multi-platform
This patch resolves temporarily infinite loop issue incurred
when Exynos drm driver is enabled and multi-platform kernel
is used by registering Exynos drm device object only in case
of Exynos SoC. So this patch will be replaced with more generic
way later.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Dave Airlie [Fri, 21 Nov 2014 02:17:43 +0000 (12:17 +1000)]
Merge branch 'drm-next-3.19' of git://people.freedesktop.org/~agd5f/linux into drm-next
- More CI dpm fixes
- Initial DPM fan control for SI/CI (disabled by default)
- GPUVM multi-ring efficiency improvements
- Some cursor fixes
* 'drm-next-3.19' of git://people.freedesktop.org/~agd5f/linux: (22 commits)
drm/radeon: update the VM after setting BO address v4
drm/radeon: sync PT updates as shared v2
drm/radeon: sync PD updates as shared
drm/radeon: fence BO_VAs manually
drm/radeon: use one VMID for each ring
drm/radeon: track VM update fences separately
drm/radeon: fence PT updates manually v2
drm/radeon: split semaphore and sync object handling v2
drm/radeon: remove unnecessary VM syncs
drm/radeon: stop re-reserving the BO in radeon_vm_bo_set_addr
drm/radeon: rework vm_flush parameters
drm/radeon/ci: disable needless sclk changes
drm/radeon/ci: force pcie level before sclk and mclk
drm/radeon/ci: use different smc command for pcie dpm
drm/radeon/ci: apply disp voltage changes before clk changes
drm/radeon: fix PCC debugging message for CI DPM
drm/radeon/dpm: add thermal dpm support for CI
drm/radeon/dpm: add smc fan control for CI (v2)
drm/radeon/dpm: add smc fan control for SI (v2)
drm/radeon: work around a hw bug in MGCG on CIK
...
Markus Elfring [Wed, 19 Nov 2014 16:50:19 +0000 (17:50 +0100)]
drm/vmwgfx: Deletion of an unnecessary check before the function call "vfree"
The vfree() function performes also input parameter validation. Thus the test
around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Markus Elfring [Wed, 19 Nov 2014 16:33:32 +0000 (17:33 +0100)]
drm/udl: Deletion of an unnecessary check before the function call "vunmap"
The vunmap() function performes also input parameter validation. Thus the test
around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Markus Elfring [Wed, 19 Nov 2014 16:05:20 +0000 (17:05 +0100)]
drm/tilcdc: Deletion of an unnecessary check before the function call "drm_fbdev_cma_hotplug_event"
The drm_fbdev_cma_hotplug_event() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Markus Elfring [Wed, 19 Nov 2014 15:33:17 +0000 (16:33 +0100)]
drm/edid: Deletion of an unnecessary check before the function call "release_firmware"
The release_firmware() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Thu, 20 Nov 2014 08:53:35 +0000 (09:53 +0100)]
drm/atomic: Add missing ERR_PTR casting
This is an oversight from
commit
f52b69f1ecfdd7ef6867a257620258c09e569552
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Nov 19 18:38:08 2014 +0100
drm/atomic: Don't overrun the connector array when hotplugging
Cc: Dave Airlie <airlied@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Thomas Hellstrom [Thu, 20 Nov 2014 08:56:25 +0000 (09:56 +0100)]
drm/gem: Warn on illegal use of the dumb buffer interface v2
It happens on occasion that developers of generic user-space applications
abuse the dumb buffer API to get hold of drm buffers that they can both
mmap() and use for GPU acceleration, using the assumptions that dumb buffers
and buffers available for GPU are
a) The same type and can be aribtrarily type-casted.
b) fully coherent.
This patch makes the most widely used drivers warn nicely when that happens,
the next step will be to fail.
v2: Move drmP.h changes to drm_gem.h. Fix Radeon dumb mmap breakage.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Fri, 12 Sep 2014 10:25:45 +0000 (12:25 +0200)]
drm/radeon: update the VM after setting BO address v4
This way the necessary VM update is kicked off immediately
if all BOs involved are in GPU accessible memory.
v2: fix vm lock
v3: immediately update unmaps as well
v4: use drm_free_large instead of kfree
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 19 Nov 2014 13:01:28 +0000 (14:01 +0100)]
drm/radeon: sync PT updates as shared v2
Only invalidating PTEs needs to be executed synchronized to using the PT.
v2: fix sync to uses
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 19 Nov 2014 13:01:27 +0000 (14:01 +0100)]
drm/radeon: sync PD updates as shared
We never invalidate PD entries and making them valid can
run with other users in parallel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 19 Nov 2014 13:01:26 +0000 (14:01 +0100)]
drm/radeon: fence BO_VAs manually
This allows us to finally remove the VM fence and
so allow concurrent use of it from different engines.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 19 Nov 2014 13:01:25 +0000 (14:01 +0100)]
drm/radeon: use one VMID for each ring
Use multiple VMIDs for each VM, one for each ring. That allows
us to execute flushes separately on each ring, still not ideal
cause in a lot of cases rings can share IDs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 19 Nov 2014 13:01:24 +0000 (14:01 +0100)]
drm/radeon: track VM update fences separately
Note for each fence if it's a VM page table update or not. This allows
us to determine the last VM update in a sync object and so to figure
out if we need to flush the TLB or not.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 19 Nov 2014 13:01:23 +0000 (14:01 +0100)]
drm/radeon: fence PT updates manually v2
This allows us to add the real execution fence as shared.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 19 Nov 2014 13:01:22 +0000 (14:01 +0100)]
drm/radeon: split semaphore and sync object handling v2
Previously we just allocated space for four hardware semaphores
in each software semaphore object. Make software semaphore objects
represent only one hardware semaphore address again by splitting
the sync code into it's own object.
v2: fix typo in comment
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 19 Nov 2014 13:01:21 +0000 (14:01 +0100)]
drm/radeon: remove unnecessary VM syncs
The PD/PTs reservation object now contains everything needed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 19 Nov 2014 13:01:20 +0000 (14:01 +0100)]
drm/radeon: stop re-reserving the BO in radeon_vm_bo_set_addr
That's useless when all callers drop the reservation
immediately after calling the function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 19 Nov 2014 13:01:19 +0000 (14:01 +0100)]
drm/radeon: rework vm_flush parameters
Use ring structure instead of index and provide vm_id and pd_addr separately.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 18 Nov 2014 20:07:33 +0000 (15:07 -0500)]
drm/radeon/ci: disable needless sclk changes
The current code always reprogrammed the sclk levels,
but we don't currently handle disp sclk requirements
so just skip it.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 18 Nov 2014 19:40:26 +0000 (14:40 -0500)]
drm/radeon/ci: force pcie level before sclk and mclk
Preferred ordering.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 18 Nov 2014 19:36:59 +0000 (14:36 -0500)]
drm/radeon/ci: use different smc command for pcie dpm
Use unforce levels rather than enable mask instruction.
This is the preferred method.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 18 Nov 2014 19:32:14 +0000 (14:32 -0500)]
drm/radeon/ci: apply disp voltage changes before clk changes
Apply voltage changes for displays before changing clocks.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 17 Nov 2014 16:52:48 +0000 (11:52 -0500)]
drm/radeon: fix PCC debugging message for CI DPM
Add missing newline and print the bad gpio shift.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 15 Sep 2014 06:15:04 +0000 (02:15 -0400)]
drm/radeon/dpm: add thermal dpm support for CI
Not currently used.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 15 Sep 2014 04:15:22 +0000 (00:15 -0400)]
drm/radeon/dpm: add smc fan control for CI (v2)
Enable smc fan control for CI boards. Should
reduce the fan noise on systems with a higher
default fan profile.
v2: disable by default, add additional fan setup, rpm control
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73338
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 15 Sep 2014 01:14:14 +0000 (21:14 -0400)]
drm/radeon/dpm: add smc fan control for SI (v2)
Enable smc fan control for SI boards. Should
reduce the fan noise on systems with a higher
default fan profile.
v2: disable by default, add rpm controls
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73338
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 17 Nov 2014 20:08:17 +0000 (15:08 -0500)]
drm/radeon: work around a hw bug in MGCG on CIK
Always need to set bit 0 of RLC_CGTT_MGCG_OVERRIDE
to avoid unreliable doorbell updates in some cases.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Michel Dänzer [Tue, 18 Nov 2014 09:00:09 +0000 (18:00 +0900)]
drm/radeon: Move radeon_cursor_move(_locked) to replace forward declaration
No functional change.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Tue, 18 Nov 2014 09:00:08 +0000 (18:00 +0900)]
drm/radeon: Use cursor_set2 hook for enabling / disabling the HW cursor
The cursor_set2 hook provides the cursor hotspot position within the
cursor image. When the hotspot position changes, we can adjust the cursor
position such that the hotspot doesn't move on the screen. This prevents
the cursor from appearing to intermittently jump around on the screen
when the position of the hotspot within the cursor image changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Thu, 20 Nov 2014 04:32:32 +0000 (14:32 +1000)]
Merge branch 'amdkfd-v6' of git://people.freedesktop.org/~gabbayo/linux into drm-next
Merge AMDKFD it seems clean enough.
* 'amdkfd-v6' of git://people.freedesktop.org/~gabbayo/linux: (29 commits)
amdkfd: Implement the Get Version IOCTL
amdkfd: Implement the Get Process Aperture IOCTL
amdkfd: Implement the Get Clock Counters IOCTL
amdkfd: Implement the Set Memory Policy IOCTL
amdkfd: Implement the create/destroy/update queue IOCTLs
amdkfd: Add interrupt handling module
amdkfd: Add device queue manager module
amdkfd: Add process queue manager module
amdkfd: Add packet manager module
amdkfd: Add module parameter of scheduling policy
amdkfd: Add kernel queue module
amdkfd: Add mqd_manager module
amdkfd: Add queue module
amdkfd: Add binding/unbinding calls to amd_iommu driver
amdkfd: Add basic modules to amdkfd
amdkfd: Add topology module to amdkfd
amdkfd: Add amdkfd skeleton driver
amdkfd: Add IOCTL set definitions of amdkfd
Update MAINTAINERS and CREDITS files with amdkfd info
drm/radeon: Add radeon <--> amdkfd interface
...
Zach Reizner [Wed, 29 Oct 2014 18:04:24 +0000 (11:04 -0700)]
drm/cirrus: allow 32bpp framebuffers for cirrus drm
This patch allows framebuffers for cirrus to be created with
32bpp pixel formats provided that they do not violate certain
restrictions of the cirrus hardware.
v2: Use pci resource length for vram size.
Signed-off-by: Zach Reizner <zachr@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Haixia Shi [Thu, 13 Nov 2014 02:33:53 +0000 (18:33 -0800)]
drm/udl: add support to export a handle to a FD on UDL.
Only importing an FD to a handle is currently supported on UDL,
but the exporting functionality is equally useful.
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Haixia Shi [Thu, 13 Nov 2014 02:33:52 +0000 (18:33 -0800)]
drm/udl: add cache flags definitions for udl_gem_object
By default set udl_gem_object as cacheable, but set WC flag when attaching
dmabuf. In udl_gem_mmap() update cache attributes based on the flags, similar
to exynos_drm_gem_mmap().
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Zach Reizner [Tue, 18 Nov 2014 01:19:41 +0000 (17:19 -0800)]
drm/cirrus: fix leaky driver load error handling
Before this patch, cirrus_device_init could have failed while
cirrus_mm_init succeeded and the driver would have reported overall
success on load. This patch causes cirrus_device_init to return on
the first error encountered.
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Wed, 19 Nov 2014 17:38:11 +0000 (18:38 +0100)]
drm/atomic_helper: Make it clear that commit_planes gets the old state
Oversight from my kerneldoc cleanup when doing the original atomic
helper series - I've only applied this clarification to the modeset
related helpers, and not the plane update code. Remedy this asap.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Wed, 19 Nov 2014 17:38:10 +0000 (18:38 +0100)]
drm: s/enum_blob_list/enum_list/ in drm_property
I guess for hysterical raisins this was meant to be the way to read
blob properties. But that's done with the two-stage approach which
uses separate blob kms object and the special-purpose get_blob ioctl.
Shipping userspace seems to have never relied on this, and the kernel
also never put any blob thing onto that property. And nowadays it
would blow up, e.g. in drm_property_destroy. Also it makes no sense to
return values in an ioctl that only returns metadata about everything.
So let's ditch all the internal code for the blob list, rename the
list to be unambiguous and sprinkle comments all over the place to
explain this peculiar piece of api.
v2: Squash in fixup from Rob to remove now unused variables.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Wed, 19 Nov 2014 17:38:09 +0000 (18:38 +0100)]
drm/crtc: Polish kerneldoc
- Make it clear that it's a negative errno (more in line with
everything else).
- Clean up the confusion around get_properties vs. getproperty ioctls:
One reads per-obj property values, the other reads property
metadata.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Wed, 19 Nov 2014 17:38:08 +0000 (18:38 +0100)]
drm/atomic: Don't overrun the connector array when hotplugging
Yet another fallout from not considering DP MST hotplug. With the
previous patches we have stable indices, but it might still happen
that a connector gets added between when we allocate the array and
when we actually add a connector. Especially when we back off due to
ww mutex contention or similar issues.
So store the sizes of the arrays in struct drm_atomic_state and double
check them. We don't really care about races except that we want to
use a consistent value, so ACCESS_ONCE is all we need. And if we
indeed notice that we'd overrun the array then just give up and
restart the entire ioctl.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Wed, 19 Nov 2014 17:38:07 +0000 (18:38 +0100)]
drm/atomic: Only destroy connector states with connection mutex held
Otherwise the connector might have been unplugged and destroyed while
we didn't look. Yet another fallout from DP MST hotplugging that I
didn't consider.
To make sure we get this right add an appropriate WARN_ON to
drm_atomic_state_clear (obviously only when we actually have a state
to clear up). And reorder all the state_clear and backoff calls to
make it work out properly.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Wed, 19 Nov 2014 17:38:06 +0000 (18:38 +0100)]
drm/atomic: Ensure that drm_connector_index is stable
I've totally forgotten that with DP MST connectors can now be
hotplugged. And failed to adapt Rob's drm_atomic_state code (which
predates connector hotplugging) to the new realities.
The first step is to make sure that the connector indices used to
access the arrays of pointers are stable. The connection mutex gives
us enough guarantees for that, which means we won't unecessarily block
on concurrent modesets or background probing.
So add a locking WARN_ON and shuffle the code slightly to make sure we
always hold the right lock.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Rob Clark [Sat, 8 Nov 2014 15:16:19 +0000 (10:16 -0500)]
drm/irq: BUG_ON() -> WARN_ON()
Let's make things a bit easier to debug when things go bad (potentially
under console_lock).
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tetsuo Handa [Thu, 13 Nov 2014 13:43:23 +0000 (22:43 +0900)]
drm/ttm: Avoid memory allocation from shrinker functions.
Andrew Morton wrote:
> On Wed, 12 Nov 2014 13:08:55 +0900 Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> wrote:
>
> > Andrew Morton wrote:
> > > Poor ttm guys - this is a bit of a trap we set for them.
> >
> > Commit
a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid deadlock.")
> > changed to use sc->gfp_mask rather than GFP_KERNEL.
> >
> > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *),
> > - GFP_KERNEL);
> > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp);
> >
> > But this bug is caused by sc->gfp_mask containing some flags which are not
> > in GFP_KERNEL, right? Then, I think
> >
> > - pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp);
> > + pages_to_free = kmalloc(npages_to_free * sizeof(struct page *), gfp & GFP_KERNEL);
> >
> > would hide this bug.
> >
> > But I think we should use GFP_ATOMIC (or drop __GFP_WAIT flag)
>
> Well no - ttm_page_pool_free() should stop calling kmalloc altogether.
> Just do
>
> struct page *pages_to_free[16];
>
> and rework the code to free 16 pages at a time. Easy.
Well, ttm code wants to process 512 pages at a time for performance.
Memory footprint increased by 512 * sizeof(struct page *) buffer is
only 4096 bytes. What about using static buffer like below?
----------
>From
d3cb5393c9c8099d6b37e769f78c31af1541fe8c Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Thu, 13 Nov 2014 22:21:54 +0900
Subject: [PATCH] drm/ttm: Avoid memory allocation from shrinker functions.
Commit
a91576d7916f6cce ("drm/ttm: Pass GFP flags in order to avoid
deadlock.") caused BUG_ON() due to sc->gfp_mask containing flags
which are not in GFP_KERNEL.
https://bugzilla.kernel.org/show_bug.cgi?id=87891
Changing from sc->gfp_mask to (sc->gfp_mask & GFP_KERNEL) would
avoid the BUG_ON(), but avoiding memory allocation from shrinker
function is better and reliable fix.
Shrinker function is already serialized by global lock, and
clean up function is called after shrinker function is unregistered.
Thus, we can use static buffer when called from shrinker function
and clean up function.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [2.6.35+]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fabian Frederick [Sun, 16 Nov 2014 10:21:25 +0000 (11:21 +0100)]
drm: remove unnecessary sizeof(u8)
sizeof(u8) is always 1.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Boris BREZILLON [Mon, 17 Nov 2014 10:21:08 +0000 (11:21 +0100)]
drm: omapdrm: remove unused variable
Commit
f9b9faf6d94dd29eab8c128905c7d091f955481d "drm: flip-work: change
drm_flip_work_init prototype" changed the drm_flip_work_init prototype
to a void function, which makes 'ret' an unused variable.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gerd Hoffmann [Wed, 19 Nov 2014 11:28:12 +0000 (12:28 +0100)]
bochs: add page_flip
Implement crtc page_flip callback for bochsdrm. The qemu stdvga has no
vblank signaling, so we have to fake it. We do so by instantly calling
drm_send_vblank_event. Tested with kmscon.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gerd Hoffmann [Wed, 19 Nov 2014 11:28:11 +0000 (12:28 +0100)]
bochs: fix bochsdrmfb mmap
Remove the mapping offset from the bo backing the fbdev framebuffer.
Wire up fbdev mmap function to map the backing bo using ttm_fbdev_mmap.
With that patch in place mmap(/dev/fb0) works as expected.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gerd Hoffmann [Wed, 19 Nov 2014 11:28:10 +0000 (12:28 +0100)]
bochs: add endian switching support
Recently (qemu 2.2+) the qemu stdvga got a register to switch the vga
framebuffer endianness. This patch adds code to explicitly set the
endianness of the framebuffer. In most cases this has no effect as
the default is guest architecture endianness. It is needed though in
case a architecture supports both big and little endian, i.e. for
ppc64le.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gerd Hoffmann [Wed, 19 Nov 2014 11:28:09 +0000 (12:28 +0100)]
bochs: little cleanup
Drop some leftover, commented code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Sun, 16 Nov 2014 20:36:53 +0000 (06:36 +1000)]
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next
Main pull for 3.19. I may have another pull in a few days with some
mdp5 bits (and hopefully mdp5 atomic), but I figured there was no need
to hold up what we have already. Main highlights so far:
1) a4xx gpu support (userspace gallium bits on mesa master)
2) mdp4/hdmi/core bits for atomic helpers. Still missing mdp5
conversion, main hold up there is current hard-coded mixer setup isn't
clever enough to deal with disabling primary plane while crtc active.
3) various other misc cleanup/fixes/etc..
* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (21 commits)
drm/msm: a4xx support for msm-drm
drm/msm: Handle register offset differences between a3xx and a4xx
drm/msm: small mmap offset cleanups
drm/msm/mdp4: atomic
drm/msm/hdmi: atomic
drm/msm: atomic core bits
drm/msm: bit of fb error checking
drm/msm: fb prepare/cleanup
drm/msm: remove unused compile-test stub
drm/msm: small fence cleanup
drm/msm/mdp5: drop attached planes table
drm/msm/mdp4: drop attached planes table
drm/msm/mdp4: don't care about fb in crtc
drm/msm/mdp5: drop private primary ptr
drm/msm/mdp4: drop private primary ptr
drm/msm: Fix fbdev for 16- and 24-bit modes.
drm/msm: Allow exported dma-bufs to be mapped
drm/msm/hdmi: refactor bind/init
drm/msm: update generated headers
drm/msm/adreno: slight init order cleanup
...
Aravind Ganesan [Mon, 8 Sep 2014 19:40:16 +0000 (13:40 -0600)]
drm/msm: a4xx support for msm-drm
Added a4xx GPU support.
Signed-off-by: Aravind Ganesan <aravindg@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Aravind Ganesan [Mon, 8 Sep 2014 16:57:28 +0000 (10:57 -0600)]
drm/msm: Handle register offset differences between a3xx and a4xx
Register offsets have changed between a3xx and a4xx GPUs.
To be able access these registers in common code, we create
a lookup table, and set of read-write APIs to access the
register through the lookup table.
Signed-off-by: Aravind Ganesan <aravindg@codeaurora.org>
[robclark: remove REG_ADRENO_UNDEFINED, just use zero, and minor
tweaks for latest generated headers]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Wed, 12 Nov 2014 20:25:50 +0000 (15:25 -0500)]
drm/msm: small mmap offset cleanups
Use pre-computed iova when unmapping, to reduce the places we assume iova
and mmap offset are (at the moment) the same. And get rid of an extra
drm_gem_free_mmap_offset() call (since it is already called from
drm_gem_object_release())
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 8 Nov 2014 18:24:08 +0000 (13:24 -0500)]
drm/msm/mdp4: atomic
Convert mdp4 display controller backend to atomic helpers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 8 Nov 2014 18:23:07 +0000 (13:23 -0500)]
drm/msm/hdmi: atomic
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 8 Nov 2014 18:21:06 +0000 (13:21 -0500)]
drm/msm: atomic core bits
The core parts for async commit.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 8 Nov 2014 14:20:28 +0000 (09:20 -0500)]
drm/msm: bit of fb error checking
It's a problem that can't happen yet, since we don't support any
multi-planar formats yet. But let's avoid nasty surprises when the
time comes.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 8 Nov 2014 14:13:37 +0000 (09:13 -0500)]
drm/msm: fb prepare/cleanup
Atomic wants to split the prepare/pin from where we actually program the
scanout address (so that any part that can fail is done synchronously).
Add some fb/gem apis to make this easier to use from the kms parts.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 7 Nov 2014 23:11:02 +0000 (18:11 -0500)]
drm/msm: remove unused compile-test stub
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 7 Nov 2014 23:10:04 +0000 (18:10 -0500)]
drm/msm: small fence cleanup
Give ourselves a way to wait for certain fence #.. makes it easier to
wait on a set of bo's, which we'll need for atomic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Wed, 12 Nov 2014 16:37:12 +0000 (11:37 -0500)]
drm/msm/mdp5: drop attached planes table
Simplify things a bit for atomic, gets rid of some bookkeeping, and
makes the code cleaner.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 7 Nov 2014 18:20:50 +0000 (13:20 -0500)]
drm/msm/mdp4: drop attached planes table
Simplify things a bit for atomic, gets rid of some bookkeeping, and
makes the code cleaner.
TODO move iterator macro somewhere common.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 7 Nov 2014 18:06:54 +0000 (13:06 -0500)]
drm/msm/mdp4: don't care about fb in crtc
Since we are configuring things via MDP4_PIPE regs in the plane, it seems
like setting the dimensions of the primary plane on the OVLP/DMA regs in
crtc is unnecessary. This will make life easier when we want to do a
nofb modeset.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Wed, 12 Nov 2014 16:22:19 +0000 (11:22 -0500)]
drm/msm/mdp5: drop private primary ptr
Since primary-plane support in core, we can just use crtc->primary.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 7 Nov 2014 18:04:51 +0000 (13:04 -0500)]
drm/msm/mdp4: drop private primary ptr
Since primary-plane support in core, we can just use crtc->primary.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Daniel Thompson [Fri, 17 Oct 2014 15:48:54 +0000 (16:48 +0100)]
drm/msm: Fix fbdev for 16- and 24-bit modes.
Currently forcing the video mode from the kernel command line (for example
video=HDMI-A-1:1280x720-16@60) does not correctly set the number of bits
per pixel. This is due to a rather aggressive override in
msm_fbdev_create(). This is a particular problem for Android bring up
because the software EGL fallbacks don't support 32bpp.
Since the overrides are actually the default values anyway then this
problem can be trivially fixed by removing the overrides completely.
Change was tested by dd'ing a test image to /dev/fb0 with no video=
(still 32bpp), video=1920x1080-32@60, video=1920x1080-24@60 and
video=1920x1080-16@60 .
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Daniel Thompson [Wed, 12 Nov 2014 11:38:14 +0000 (11:38 +0000)]
drm/msm: Allow exported dma-bufs to be mapped
Currently msm does not implement gem_prime_mmap. Without this it is not
possible to draw onto a dma-buf from userspace (making its very hard to
implement the Android rendering model).
Fixing this is just a matter of adding a little boilerplate.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Tue, 4 Nov 2014 18:33:14 +0000 (13:33 -0500)]
drm/msm/hdmi: refactor bind/init
Split up hdmi_init() into hdmi_init() (done at hdmi sub-device
bind/probe time) and hdmi_modeset_init() done from master driver's
modeset_init().
Anything that can fail due to dependencies on other drivers which
may be missing or not probed yet should go in hdmi_init(), so that
devm error/cleanup paths work properly.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 31 Oct 2014 16:54:25 +0000 (12:54 -0400)]
drm/msm: update generated headers
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 31 Oct 2014 15:50:55 +0000 (11:50 -0400)]
drm/msm/adreno: slight init order cleanup
Move anything that can fail after call to base class msm_gpu_init().
This way, if we fail, active_list has already been initialized so we
don't trip 'WARN_ON(!list_empty(&gpu->active_list))' in
msm_gpu_cleanup().
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 31 Oct 2014 16:19:40 +0000 (12:19 -0400)]
drm/msm: select REGULATOR
Fixes a potential error, spotted by Felipe with randconfig:
-----
drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c: In function ‘mdp4_kms_init’:
drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c:384:2: error: implicit declaration \
of function ‘devm_regulator_get_exclusive’ [-Werror=implicit-function-declaration]
mdp4_kms->vdd = devm_regulator_get_exclusive(&pdev->dev, "vdd");
^
drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c:384:16: error: assignment makes \
pointer from integer without a cast [-Werror]
mdp4_kms->vdd = devm_regulator_get_exclusive(&pdev->dev, "vdd");
^
-----
Also add a brief comment explaining the use of _get_exclusive()
Reported-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Dave Airlie [Sat, 15 Nov 2014 00:15:30 +0000 (10:15 +1000)]
drm/qxl: drop unused mode private pointer
This was pointless, forgot to remove the code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 14 Nov 2014 23:50:21 +0000 (09:50 +1000)]
Merge tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next
drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
Some drivers erroneously treat the .pitch and .size fields of struct
drm_mode_create_dumb as inputs. While the include/uapi/drm/drm_mode.h
header has a comment denoting them as outputs, that seemingly wasn't
enough to make drivers use them properly.
The result is that some userspace doesn't explicitly zero out those
fields, assuming that the kernel won't use them. That causes problems
since the data within the structure might be uninitialized, so bogus
data may end up confusing drivers (ridiculously large values for the
pitch, ...).
This series attempts to improve the situation by fixing all drivers to
not use the output fields. Furthermore to spare new drivers this bad
surprise, the DRM core now zeros out these fields prior to handing the
data structure to the driver.
Lessons learned from this are that future IOCTLs should be properly
documented (in the DRM DocBook for example) and should be rigorously
defined. To prevent misuse like this, userspace should be required to
zero out all output fields. The kernel should check for this and fail
if that's not the case.
* tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux:
drm/cma: Remove call to drm_gem_free_mmap_offset()
drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
drm/rcar: gem: dumb: pitch is an output
drm/omap: gem: dumb: pitch is an output
drm/cma: Introduce drm_gem_cma_dumb_create_internal()
drm/doc: Add GEM/CMA helpers to kerneldoc
drm/doc: mm: Fix indentation
drm/gem: Fix a few kerneldoc typos
Dave Airlie [Tue, 28 Oct 2014 01:28:44 +0000 (11:28 +1000)]
drm/qxl: use suggested x/y offset properties to pass guest prefs
This passes the guest preferences for a where to place the
outputs through to userspace. Userspace would need to be updated
to take note of this information, X server and GNOME.
Signed-off-by: Dave Airlie <airlied@redhat.com>