OSDN Git Service
Chris Wilson [Sun, 15 Jan 2017 12:58:25 +0000 (12:58 +0000)]
drm/i915: Avoid drm_atomic_state_put(NULL) in intel_display_resume
intel_display_resume() may be called without an atomic state to restore,
i.e. dev_priv->modeset_reset_restore state is NULL. One such case is
following a lid open/close event and the forced modeset in
intel_lid_notify().
Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Tested-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Fixes:
0853695c3ba4 ("drm: Add reference counting to drm_atomic_state")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170115125825.18597-1-chris@chris-wilson.co.uk
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Mika Kuoppala [Tue, 17 Jan 2017 15:59:07 +0000 (17:59 +0200)]
drm/i915: Add comment how we treat hung contexts
Explain in a comment how and why we treat hung context like we do.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-7-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Tue, 17 Jan 2017 15:59:06 +0000 (17:59 +0200)]
drm/i915: Detect a failed GPU reset+recovery
If we can't recover the GPU after the reset, mark it as wedged to cancel
the outstanding tasks and to prevent new users from trying to use the
broken GPU.
v2: Check the same ring is hung again before declaring the reset broken.
v3: use engine_stalled (Mika)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-6-git-send-email-mika.kuoppala@intel.com
Mika Kuoppala [Tue, 17 Jan 2017 15:59:05 +0000 (17:59 +0200)]
drm/i915: Tidy up engine reset logic
Split engine reset for engine and request specific parts.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-5-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Mika Kuoppala [Tue, 17 Jan 2017 15:59:04 +0000 (17:59 +0200)]
drm/i915: Introduce engine_stalled helper
Move the engine stalled/pardoned check into a helper function.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-4-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Mika Kuoppala [Tue, 17 Jan 2017 15:59:03 +0000 (17:59 +0200)]
drm/i915: Cleanup request skip decision
Since we now only skip banned contexts, preventing the skip of default
contexts is no longer sensible. For a similar argument as before
'commit
7ec73b7e36d0 ("drm/i915: Only skip requests once a context is banned")'
we end up with an inconsistent API if we only mark future execbufs from
the default ctx as banned but fail to mark those currently executing
as failed.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-3-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Mika Kuoppala [Tue, 17 Jan 2017 15:59:02 +0000 (17:59 +0200)]
drm/i915: Introduce engine_skip_context
Add a new function for skipping all pending requests
for a context in order to make engine reset flow more
readable.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-2-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Tue, 17 Jan 2017 15:59:01 +0000 (17:59 +0200)]
drm/i915: Move engine reset preparation to i915_gem_reset_prepare()
Now that we have prepare/finish routines for the GEM reset, move the
disabling of the engine->irq_tasklet into them to reduce repetition. The
device irq enable/disable is split out to ensure it is run first and
last always (even if the GPU reset fails).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-1-git-send-email-mika.kuoppala@intel.com
Chris Wilson [Mon, 16 Jan 2017 13:06:22 +0000 (13:06 +0000)]
drm/i915/psr: Fix compiler warnings for hsw_psr_disable()
drivers/gpu/drm/i915/intel_psr.c:634 hsw_psr_disable() warn: if statement not indented
drivers/gpu/drm/i915/intel_psr.c:644 hsw_psr_disable() warn: if statement not indented
Fixes:
3fcb0ca1d8db ("drm/i915/psr: fix blank screen issue for psr2")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Cc: Patil Deepti <deepti.patil@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116130622.20369-2-chris@chris-wilson.co.uk
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Mon, 16 Jan 2017 13:06:21 +0000 (13:06 +0000)]
drm/i915: Fix compiler warnings for i915_edp_psr_status()
Appease both the poor reader and the compiler by rewriting the string
lookup for EDP_PSR2_STATUS_CTL:
drivers/gpu/drm/i915/i915_debugfs.c:2662 i915_edp_psr_status() warn: if statement not indented
Fixes:
6ba1f9e1772f ("drm/i915/psr: report live PSR2 State")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Cc: Patil Deepti <deepti.patil@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116130622.20369-1-chris@chris-wilson.co.uk
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Anusha Srivatsa [Sat, 14 Jan 2017 01:17:05 +0000 (17:17 -0800)]
drm/i915/huc: Unified css_header struct for GuC and HuC
HuC firmware css header has almost exactly same definition as GuC
firmware except for the sw_version. Also, add a new member fw_type
into intel_uc_fw to indicate what kind of fw it is. So, the loader
will pull right sw_version from header.
v2: rebased on-top of drm-intel-nightly
v3: rebased. Rename device_id to guc_branch_client_version,
make guc_sw_version a union. <Jeff Mcgee>. Put UC_FW_TYPE_GUC
and UC_FW_TYPE_HUC into an enum.
v4: rebased on top of drm-tip.Update dev to dev_priv in
intel_uc_fw_fetch.
v5: rebased. Add INTEL_ prefix to an enum. Add fw_type declaration
from patch 1.Combine two different unions for huc and guc version,
reserved etc into one union with two structs.
v6: rebased. Change fw_type to enum.
v7: rebased. Rename the enum fw_type to intel_uc_fw_type.
Cc: Michal Wajdeczko <michal.wajdeczko.@intel.com>
Tested-by: Xiang Haihao <haihao.xiang@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-3-git-send-email-anusha.srivatsa@intel.com
Anusha Srivatsa [Sat, 14 Jan 2017 01:17:04 +0000 (17:17 -0800)]
drm/i915/guc: Make the GuC fw loading helper functions general
Rename some of the GuC fw loading code to make them more general. We
will utilise them for HuC loading as well.
s/intel_guc_fw/intel_uc_fw/g
s/GUC_FIRMWARE/INTEL_UC_FIRMWARE/g
Struct intel_guc_fw is renamed to intel_uc_fw. Prefix of tts members,
such as 'guc' or 'guc_fw' either is renamed to 'uc' or removed for
same purpose.
v2: rebased on top of nightly.
reapplied the search/replace as upstream code as changed.
v3: removed G from messages in shared fw fetch function.
v4: rebased.Updated dev to dev_priv in intel_guc_setup(), guc_fw_getch()
and intel_guc_init().
v5: rebased. Remove uint32_t fw_type to patch 2. Add INTEL_ prefix for
fields in enum intel_uc_fw_status. Remove uc_dev field since its never
used.Rename uc_fw to just fw and guc_fw to fw to avoid redundency.
v6: rebased. Remove sections of code that were commented and no longer
required.
v7: rebased. Remove uc_fw_ prefix from path and obj fields
in intel_uc_fw struct as suggested by Michal.
v8: rebased. Add declaration of intel_guc_wopcm_size() in
this patch instead of patch 3.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-2-git-send-email-anusha.srivatsa@intel.com
Michal Wajdeczko [Fri, 13 Jan 2017 17:41:57 +0000 (17:41 +0000)]
drm/i915/guc: Move GuC log related functions into dedicated file
Functions supporting GuC logging capabilities were spread across
many files, with unnecessary exposures and mixed with unrelated
code. Dedicate file will make maintenance of all GuC functions
easier as more functions are coming to support GuC submissions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170113174157.104492-1-michal.wajdeczko@intel.com
Ville Syrjälä [Mon, 7 Nov 2016 20:20:54 +0000 (22:20 +0200)]
drm/i915: Ignore bogus plane coordinates on SKL when the plane is not visible
When the plane is invisible we may have all sorts of bogus stuff
in the coordinates, which we must ignore or else we might fail the
plane update. This started to happen on SKL when I moved the plane
offset computation to happen in the check phase. Previously we
happily ignored it all since we never called the update_plane hook
with an invisible plane.
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes:
b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98258
Testcase: igt/pm_rpm/legacy-planes
Testcase: igt/pm_rpm/universal-planes
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-3-git-send-email-ville.syrjala@linux.intel.com
Zhenyu Wang [Tue, 17 Jan 2017 14:06:11 +0000 (22:06 +0800)]
drm/i915: Fix a typo in vgt_balloon_space()
Commit
625d988acc28 ("drm/i915: Extract reserving space in the GTT to a
helper") introduces this typo which can cause a driver loading failure
in Linux GVT-g guest.
Fixes:
625d988acc28 ("drm/i915: Extract reserving space in the GTT to a helper")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484661972-9366-1-git-send-email-zhi.a.wang@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Mon, 16 Jan 2017 14:52:42 +0000 (14:52 +0000)]
drm/i915: Assert internal objects are page aligned
Internal objects must be passed a page-aligned size. Check it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170116145242.13875-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 29 Dec 2016 14:40:37 +0000 (14:40 +0000)]
drm/i915: Skip switch to kernel context if already done
Some engines are never user or already sitting idle in the kernel
context and for those we can skip flushing the current context for
i915_gem_switch_to_kernel_context(). We used to perform this
optimisation but that was removed for convenience of converting over to
multiple timelines and handling the pending request queues.
From the perspective of writing selftests, reducing the number of
background operations on the engines makes defining assertions easier.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114162334.10271-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Sat, 14 Jan 2017 16:23:33 +0000 (16:23 +0000)]
drm/i915: Construct a request even if the GPU is currently hung
As we now have the ability to directly reset the GPU from the waiter
(and so do not need to drop the lock in order to let the reset proceed)
and also do not lose requests over a reset, we can now simply queue the
request to occur after the reset rather than roundtripping to userspace
(or worse failing with EIO).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114162334.10271-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Sun, 15 Jan 2017 17:27:40 +0000 (17:27 +0000)]
drm/i915: Assert we do not attempt to reuse an allocated node
i915_gem_gtt_reserve() and i915_gem_gtt_insert() can only work on
unallocated nodes. Check that the callers complies.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170115172740.28995-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Sun, 15 Jan 2017 13:47:46 +0000 (13:47 +0000)]
drm/i915: Catch attempting to use the aliasing_gtt's drm_mm
The aliasing_gtt is just that, an alias of the global GTT. We do not
populate it directly, instead we always use the global GTT. Catch any
attempt to incorrectly allocate ranges from the aliasing_gtt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170115134746.29325-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Fri, 13 Jan 2017 21:43:35 +0000 (21:43 +0000)]
drm/i915: Flush the change in debugobject before reallocation
When marking the debugobject as freed, be sure that write is flushed
before another CPU may see it on a reallocation path.
Only seen once in CI:
[ 159.240873] WARNING: CPU: 3 PID: 6735 at lib/debugobjects.c:263 debug_print_object+0x87/0xb0
[ 159.240897] ODEBUG: init destroyed (active state 0) object type: i915_sw_fence hint: submit_notify+0x0/0x4c [i915]
[ 159.240902] Modules linked in: snd_hda_intel i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul snd_hda_codec_realtek crc32_pclmul snd_hda_codec_generic snd_hda_codec_hdmi ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mei_me lpc_ich mei e1000e ptp pps_core [last unloaded: i915]
[ 159.240913] CPU: 3 PID: 6735 Comm: gem_exec_nop Tainted: G U 4.10.0-rc3-CI-Trybot_479+ #1
[ 159.240913] Hardware name: LENOVO 10AGS00601/SHARKBAY, BIOS FBKT34AUS 04/24/2013
[ 159.240914] Call Trace:
[ 159.240916] dump_stack+0x67/0x92
[ 159.240919] __warn+0xc6/0xe0
[ 159.240920] warn_slowpath_fmt+0x4a/0x50
[ 159.240921] debug_print_object+0x87/0xb0
[ 159.240935] ? __i915_request_wait_for_execute+0x1d0/0x1d0 [i915]
[ 159.240936] __debug_object_init+0xb2/0x410
[ 159.240950] ? __i915_request_wait_for_execute+0x1d0/0x1d0 [i915]
[ 159.240951] debug_object_init+0x16/0x20
[ 159.240962] __i915_sw_fence_init+0x29/0x60 [i915]
[ 159.240975] i915_gem_request_alloc+0x1fb/0x450 [i915]
[ 159.240987] i915_gem_do_execbuffer.isra.15+0x798/0x1b20 [i915]
[ 159.241000] i915_gem_execbuffer2+0xc0/0x250 [i915]
[ 159.241003] drm_ioctl+0x200/0x450
[ 159.241016] ? i915_gem_execbuffer+0x330/0x330 [i915]
[ 159.241018] do_vfs_ioctl+0x90/0x6e0
[ 159.241020] ? trace_hardirqs_on_caller+0x122/0x1b0
[ 159.241021] SyS_ioctl+0x3c/0x70
[ 159.241023] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 159.241024] RIP: 0033:0x7f9bc4f41357
[ 159.241025] RSP: 002b:
00007ffc6cd5c568 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 159.241026] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f9bc4f41357
[ 159.241026] RDX:
00007ffc6cd5c640 RSI:
0000000040406469 RDI:
0000000000000003
[ 159.241027] RBP:
00007ffc6cd5c640 R08:
0000000000047508 R09:
0000000000000001
[ 159.241027] R10:
000b58552d323c3d R11:
0000000000000246 R12:
0000000040406469
[ 159.241028] R13:
0000000000000003 R14:
0000000000000004 R15:
0000000000000001
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170113214335.5829-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Sat, 14 Jan 2017 10:51:13 +0000 (10:51 +0000)]
drm/i915/dp: Silence compiler for missing prototype
drivers/gpu/drm/i915/intel_dp.c:3063:6: warning: no previous prototype for ‘intel_dp_get_alpm_status’ [-Wmissing-prototypes]
bool intel_dp_get_alpm_status(struct intel_dp *intel_dp)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114105113.1231-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Sat, 14 Jan 2017 10:51:12 +0000 (10:51 +0000)]
drm/i915: Use __printf markup to silence compiler
drivers/gpu/drm/i915/i915_gpu_error.c: In function ‘i915_error_vprintf’:
drivers/gpu/drm/i915/i915_gpu_error.c:137:3: warning:
function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
len = vsnprintf(NULL, 0, f, tmp);
^~~
drivers/gpu/drm/i915/i915_gpu_error.c:144:2: warning:
function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
len = vsnprintf(e->buf + e->bytes, e->size - e->bytes, f, args);
^~~
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114105113.1231-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Sat, 14 Jan 2017 00:28:27 +0000 (00:28 +0000)]
drm/i915: Eliminate superfluous i915_ggtt_view_normal
Since commit
058d88c4330f ("drm/i915: Track pinned VMA"), there is only
one user of i915_ggtt_view_normal rodate. Just treat NULL as no special
view in pin_to_display() like everywhere else.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114002827.31315-7-chris@chris-wilson.co.uk
Chris Wilson [Sat, 14 Jan 2017 00:28:26 +0000 (00:28 +0000)]
drm/i915: Eliminate superfluous i915_ggtt_view_rotated
It is only being used to clear a struct and set the type, after which it
is overwritten. Since we no longer check the unset bits of the union,
skipping the clear is permissible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114002827.31315-6-chris@chris-wilson.co.uk
Chris Wilson [Sat, 14 Jan 2017 00:28:25 +0000 (00:28 +0000)]
drm/i915: Convert i915_ggtt_view to use an anonymous union
Reading the ggtt_views is much more pleasant without the extra
characters from specifying the union (i.e. ggtt_view.partial rather than
ggtt_view.params.partial). To make this work inside i915_vma_compare()
with only a single memcmp requires us to ensure that there are no
uninitialised bytes within each branch of the union (we make sure the
structs are packed) and we need to store the size of each branch.
v4: Rewrite changelog and add comments explaining the assert.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114002827.31315-5-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Sat, 14 Jan 2017 00:28:24 +0000 (00:28 +0000)]
drm/i915: Stop clearing i915_ggtt_view
As we now use a compact memcmp in i915_vma_compare(), we can forgo
clearing the entire view and only set the precise parameters used in
this view.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114002827.31315-4-chris@chris-wilson.co.uk
Chris Wilson [Sat, 14 Jan 2017 00:28:23 +0000 (00:28 +0000)]
drm/i915: Compact memcmp in i915_vma_compare()
In preparation for the next patch to convert to using an anonymous union
and leaving the excess bytes in the union uninitialised, we first need
to make sure we do not compare using those uninitialised bytes. We also
want to preserve the compactness of the code, avoiding a second call to
memcmp or introducing a switch, so we take advantage of using the type
as an encoded size (as well as a unique identifier for each type of view).
v2: Add the rationale for why we encode size into ggtt_view.type as a
comment before the memcmp()
v3: Use a switch to also assert that no two i915_ggtt_view_type have the same
value.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114002827.31315-3-chris@chris-wilson.co.uk
Chris Wilson [Sat, 14 Jan 2017 00:28:22 +0000 (00:28 +0000)]
drm/i915: Mark the ggtt_view structs as packed
In the next few patches, we will depend upon there being no
uninitialised bits inside the ggtt_view. To ensure this we add the
__packed attribute and double check with a build bug that gcc hasn't
expanded the struct to include some padding bytes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114002827.31315-2-chris@chris-wilson.co.uk
Chris Wilson [Sat, 14 Jan 2017 00:28:21 +0000 (00:28 +0000)]
drm/i915: Name the anonymous structs inside i915_ggtt_view
Naming this pair will become useful shortly...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170114002827.31315-1-chris@chris-wilson.co.uk
Nagaraju, Vathsala [Fri, 6 Jan 2017 16:32:32 +0000 (22:02 +0530)]
drm/i915/psr: report live PSR2 State
Reports live state of PSR2 form PSR2_STATUS register.
bit field 31:28 gives the live state of PSR2.
It can be used to check if system is in deep sleep,
selective update or selective update standby.
During video play back, we can use this to check
if system is entering SU mode or not.
when system is in idle state, DEEP_SLEEP(8) must be entered.
When video playback is happening, system must be in
SLEEP(3 / selective update) or SU_STANDBY( 6 / selective update standby)
v2: (Rodrigo)
- Remove EDP_PSR2_STATUS_TG_ON=a ,instead use ARRAY_SIZE
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483720352-24761-1-git-send-email-vathsala.nagaraju@intel.com
Nagaraju, Vathsala [Wed, 11 Jan 2017 22:28:30 +0000 (03:58 +0530)]
drm/i915/psr: enable psr2 for y cordinate panels
Psr2 is enabled only for y cordinate panels.Once GTC (global time code)
is implemented,this restriction is removed so that psr2
can work on panels without y cordinate support.
v2: (Rodrigo)
- Move the check to intel_psr_match_conditions
v3: (Rodrigo)
- add return false
v4: rebase
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484173710-3138-1-git-send-email-vathsala.nagaraju@intel.com
Nagaraju, Vathsala [Fri, 13 Jan 2017 00:31:24 +0000 (06:01 +0530)]
drm/i915/psr: set PSR_MASK bits for deep sleep
Program EDP_PSR_DEBUG_CTL (PSR_MASK) to enable system
to go to deep sleep while in psr2.PSR2_STATUS bit 31:28
should report value 8 , if system enters deep sleep state.
Also, EDP_FRAMES_BEFORE_SU_ENTRY is set 1 , if not set,
flickering is observed on psr2 panel.
v2: (Ilia Mirkin)
- Remove duplicate bit definition 25:27
v3: rebase
v4: rebase
v5: rebase
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484267484-21843-1-git-send-email-vathsala.nagaraju@intel.com
Nagaraju, Vathsala [Thu, 12 Jan 2017 19:01:31 +0000 (00:31 +0530)]
drm/i915/psr: set CHICKEN_TRANS for psr2
As per bpsec, CHICKEN_TRANS_EDP bit 12 ,15 must be programmed in
psr2 enable sequence.
bit 12 : Program Transcoder EDP VSC DIP header with a valid setting for
PSR2 and Set CHICKEN_TRANS_EDP(0x420cc) bit 12 for programmable
header packet.
bit 15 : Set CHICKEN_TRANS_EDP(0x420cc) bit 15 if Y coordinate is supported
v2: (Rodrigo)
- move CHICKEN_TRANS_EDP bit set logic right after setup_vsc
v3:(Rodrigo)
- initialize chicken_trans to CHICKEN_TRANS_BIT12 instead of 0
v4:(chris wilson)
- use BIT(12), remove CHICKEN_TRANS_BIT12
- remove unnecessary comments
- update commit message
v5:
- rename bit 12 PSR2_VSC_ENABLE_PROG_HEADER
- rename bit 15 PSR2_ADD_VERTICAL_LINE_COUNT
v6:(Rodrigo)
- remove TRANS_EDP=3, use cpu_transcoder
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484247691-20930-1-git-send-email-vathsala.nagaraju@intel.com
Chris Wilson [Wed, 11 Jan 2017 21:09:26 +0000 (21:09 +0000)]
drm/i915: Assert that we have allocated the drm_mm_node upon pinning
We currently check after the slow path that the vma is bound correctly,
but we don't currently check after the fast path. This is important in
case we accidentally take the fast path and leave the vma misplaced.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111210937.29252-27-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 11 Jan 2017 21:09:25 +0000 (21:09 +0000)]
drm/i915: Move i915_ppgtt_close() into i915_gem_gtt.c
Move it alongside its ppgtt counterparts, in order to make it available
for the ppgtt selftests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111210937.29252-26-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Nagaraju, Vathsala [Mon, 2 Jan 2017 11:30:58 +0000 (17:00 +0530)]
drm/i915/psr: enable ALPM for psr2
As per edp1.4 spec , alpm is required for psr2 operation as it's
used for all psr2 main link power down management and alpm enable
bit must be set for psr2 operation.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483356663-32668-6-git-send-email-vathsala.nagaraju@intel.com
Nagaraju, Vathsala [Wed, 11 Jan 2017 15:14:33 +0000 (20:44 +0530)]
drm/i915/psr: disable aux_frame_sync on psr2 exit
Screen freeze observed if AUX_FRAME_SYNC is not disabled
on psr2 exit.AUX_FRAME_SYNC needed for psr2 is enabled during
psr2 entry. It must be disabled on psr2 exit.
v2: rebase
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484147673-2044-1-git-send-email-vathsala.nagaraju@intel.com
Nagaraju, Vathsala [Thu, 12 Jan 2017 18:00:59 +0000 (23:30 +0530)]
drm/i915/psr: fix blank screen issue for psr2
Psr1 and psr2 are mutually exclusive,ie when psr2 is enabled,
psr1 should be disabled.When psr2 is exited , bit 31 of reg
PSR2_CTL must be set to 0 but currently bit 31 of SRD_CTL
(psr1 control register)is set to 0.
Also ,PSR2_IDLE state is looked up from SRD_STATUS(psr1 register)
instead of PSR2_STATUS register, which has wrong data, resulting
in blankscreen.
hsw_enable_source is split into hsw_enable_source_psr1 and
hsw_enable_source_psr2 for easier code review and maintenance,
as suggested by rodrigo and jim.
v2: (Rodrigo)
- Rename hsw_enable_source_psr* to intel_enable_source_psr*
v3: (Rodrigo)
- In hsw_psr_disable ,
1) for psr active case, handle psr2 followed by psr1.
2) psr inactive case, handle psr2 followed by psr1
v4:(Rodrigo)
- move psr2 restriction(32X20) to match_conditions function
returning false and fully blocking PSR to a new patch before
this one.
v5: in source_psr2, removed val = EDP_PSR_ENABLE
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484244059-9201-1-git-send-email-vathsala.nagaraju@intel.com
Chris Wilson [Thu, 12 Jan 2017 16:45:59 +0000 (16:45 +0000)]
drm/i915: Fix up kerneldoc parameters for i915_gem_gtt_*()
Parameter: good.
Parameter - bad.
One day I'll learn the syntax.
Fixes:
625d988acc28 ("drm/i915: Extract reserving space in the GTT to a helper")
Fixes:
e007b19d7ba7 ("drm/i915: Use the MRU stack search after evicting")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112164559.27232-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Chris Wilson [Thu, 12 Jan 2017 11:21:08 +0000 (11:21 +0000)]
drm/i915: Expand ggtt_view parameters for debugfs
When dumping the VMA, include the parameters of the different GGTT views
so that we can distinguish them.
v2: Contract output and add MISSING_CASE for any unknown types.
v3: Show both stride and offset for rotated planes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112112108.31632-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 12 Jan 2017 13:04:31 +0000 (13:04 +0000)]
drm/i915: Declare i915_gem_object_create_internal() as taking phys_addr_t size
The internal object is a collection of struct pages and so is
intrinsically linked to the available physical memory on the machine,
and not an arbitrary type from the uabi. Use phys_addr_t so the link
between size and memory consumption is clear, and then double check that
we don't overflow the maximum object size.
v2: Also assert that size is not zero - a mistake I made a few times
while writing selftests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112130431.1844-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 12 Jan 2017 11:00:49 +0000 (11:00 +0000)]
drm/i915: Invalidate the guc ggtt TLB upon insertion
Move the GuC invalidation of its ggtt TLB to where we perform the ggtt
modification rather than proliferate it into all the callers of the
insert (which may or may not in fact have to do the insertion).
v2: Just do the guc invalidate unconditionally, (afaict) it has no impact
without the guc loaded on gen8+
v3: Conditionally invalidate the guc - just in case that register has
not been validated for other modes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112110050.25333-1-chris@chris-wilson.co.uk
Maarten Lankhorst [Thu, 12 Jan 2017 09:43:45 +0000 (10:43 +0100)]
drm/i915: Remove useless casts to intel_plane_state
The visible member used to be in intel_plane_state->visible,
but has been moved to drm_plane_state->visible. In the conversion
some casts were left in that are now useless.
to_intel_plane_state(x)->base.visible is the same as x->visible,
so use the latter to clear up the code a little.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484214225-30328-1-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Michel Thierry [Thu, 12 Jan 2017 04:18:09 +0000 (20:18 -0800)]
drm/i915: Update i915_reset parameter for kerneldoc
Since commit
c033666a94b57 ("drm/i915: Store a i915 backpointer from
engine, and use it") i915_reset receives dev_priv, but the kerneldoc
was not updated.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112041817.1102-3-michel.thierry@intel.com
Michel Thierry [Thu, 12 Jan 2017 04:18:08 +0000 (20:18 -0800)]
drm/i915: Keep i915_handle_error kerneldoc parameters together
And before the function description.
Tidy up from commit
14bb2c11796d70b ("drm/i915: Fix a buch of kerneldoc
warnings"), all others kerneldoc blocks look ok.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112041817.1102-2-michel.thierry@intel.com
Francisco Jerez [Thu, 12 Jan 2017 10:44:54 +0000 (12:44 +0200)]
drm/i915: Remove WaDisableLSQCROPERFforOCL KBL workaround.
The WaDisableLSQCROPERFforOCL workaround has the side effect of
disabling an L3SQ optimization that has huge performance implications
and is unlikely to be necessary for the correct functioning of usual
graphic workloads. Userspace is free to re-enable the workaround on
demand, and is generally in a better position to determine whether the
workaround is necessary than the DRM is (e.g. only during the
execution of compute kernels that rely on both L3 fences and HDC R/W
requests).
The same workaround seems to apply to BDW (at least to production
stepping G1) and SKL as well (the internal workaround database claims
that it does for all steppings, while the BSpec workaround table only
mentions pre-production steppings), but the DRM doesn't do anything
beyond whitelisting the L3SQCREG4 register so userspace can enable it
when it sees fit. Do the same on KBL platforms.
Improves performance of the GFXBench4 gl_manhattan31 benchmark by 60%,
and gl_4 (AKA car chase) by 14% on a KBL GT2 running Mesa master --
This is followed by a regression of 35% and 10% respectively for the
same benchmarks and platform caused by my recent patch series
switching userspace to use the dataport constant cache instead of the
sampler to implement uniform pull constant loads, which caused us to
hit more heavily the L3 cache (and on platforms other than KBL had the
opposite effect of improving performance of the same two benchmarks).
The overall effect on KBL of this change combined with the recent
userspace change is respectively 4.6% and 2.6%. SynMark2 OglShMapPcf
was affected by the constant cache changes (though it improved as it
did on other platforms rather than regressing), but is not
significantly affected by this patch (with statistical significance of
5% and sample size 20).
v2: Drop some more code to avoid unused variable warning.
Fixes:
738fa1b3123f ("drm/i915/kbl: Add WaDisableLSQCROPERFforOCL")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99256
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: beignet@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.7+
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[Removed double Fixes tag]
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484217894-20505-1-git-send-email-mika.kuoppala@intel.com
Michał Winiarski [Wed, 11 Jan 2017 15:17:39 +0000 (16:17 +0100)]
drm/i915/guc: Make sure vma containing firmware is GuC mappable
Since commit
4741da925fa3 ("drm/i915/guc: Assert that all GGTT offsets used
by the GuC are mappable"), we're asserting that GuC firmware is in the
GuC mappable range.
Except we're not pinning the object with bias, which means it's possible
to trigger this assert. Let's add a proper bias.
Fixes:
4741da925fa3 ("drm/i915/guc: Assert that all GGTT offsets used by the GuC are mappable")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111151739.28965-1-michal.winiarski@intel.com
Libin Yang [Thu, 12 Jan 2017 08:04:54 +0000 (16:04 +0800)]
ALSA: Documentation about HDA DP MST pin init and connection
Add the documentation about HD-audio DP MST:
1. pin initialization
2. device entry connection list
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1484208294-8637-4-git-send-email-libin.yang@intel.com
Libin Yang [Thu, 12 Jan 2017 08:04:53 +0000 (16:04 +0800)]
ALSA: hda - add DP MST audio support
This patch adds the DP MST audio support on i915 platform and
it will enable dyn_pcm_assign feature.
DP MST supports several device entry on the same port and each
device entry can map to one pcm stream. For example, on i915,
there are 3 pins, and each pin has 3 device entries. This means
there should be 3x3 pcms. However, there is only 3 pipe lines in
i915. This means 3 pcms are actived at most at the same moment.
We will create 5 pcms (pin number + dev entry num - 1) in this case.
For the details, please refer commit
a76056f2e57e
("ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug")
Each device entry is a virtual pin. It is described by pin_nid and dev_id
in struct hdmi_spec_per_pin.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1484208294-8637-3-git-send-email-libin.yang@intel.com
Libin Yang [Thu, 12 Jan 2017 08:04:52 +0000 (16:04 +0800)]
ALSA: hda - add DP mst verb support
Add snd_hda_get_dev_select() and snd_hda_set_dev_select() functions
for DP MST audio support.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1484208294-8637-2-git-send-email-libin.yang@intel.com
Zhenyu Wang [Mon, 9 Jan 2017 13:14:53 +0000 (21:14 +0800)]
drm/i915: check ppgtt validity when init reg state
Check if ppgtt is valid for context when init reg state. For gvt
context which has no i915 allocated ppgtt, failed to check that
would cause kernel null ptr reference error.
v2: remove !48bit ppgtt case as we'll always update before submit (Chris)
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109131453.3943-1-zhenyuw@linux.intel.com
Chris Wilson [Wed, 11 Jan 2017 18:15:16 +0000 (18:15 +0000)]
drm/i915: Detect vma reserved for execbuf in evict-for-node
The vma->exec_list is still the only means we have for both reserving an
object in execbuf, and for constructing the eviction list. So during the
construction of the eviction list, we must treat anything already on the
exec_list as being pinned.
Yes, this sharing of two semantically different lists will be fixed! But
in the meantime, we have the issue that this is tripping up CI since we
started using i915_gem_gtt_reserve_node() + i915_gem_evict_for_node()
from the regular execbuf reservation path in commit
606fec956c0e
("drm/i915: Prefer random replacement before eviction search"):
[ 108.424063] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:254!
[ 108.424072] invalid opcode: 0000 [#1] PREEMPT SMP
[ 108.424079] Modules linked in: snd_hda_intel i915 intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core mei_me snd_pcm lpc_ich mei sdhci_pci sdhci mmc_core e1000e ptp pps_core [last unloaded: i915]
[ 108.424132] CPU: 1 PID: 6865 Comm: gem_cs_tlb Tainted: G U 4.10.0-rc3-CI-CI_DRM_2049+ #1
[ 108.424143] Hardware name: Hewlett-Packard HP EliteBook 8440p/172A, BIOS 68CCU Ver. F.24 09/13/2013
[ 108.424154] task:
ffff88012ae22600 task.stack:
ffffc90000a14000
[ 108.424220] RIP: 0010:i915_gem_evict_for_node+0x237/0x410 [i915]
[ 108.424229] RSP: 0018:
ffffc90000a17a58 EFLAGS:
00010202
[ 108.424237] RAX:
0000000000005871 RBX:
ffff88012d1ad778 RCX:
0000000000000000
[ 108.424246] RDX:
000000007ffff000 RSI:
ffffc90000a17a68 RDI:
ffff880127e694d8
[ 108.424255] RBP:
ffffc90000a17aa0 R08:
ffffc90000a17a68 R09:
0000000000000000
[ 108.424264] R10:
0000000000000001 R11:
0000000000000000 R12:
0000000080000000
[ 108.424273] R13:
ffffc90000a17a68 R14:
ffff880127e694d8 R15:
ffffffffa0387330
[ 108.424283] FS:
00007f8236e3d8c0(0000) GS:
ffff880137c40000(0000) knlGS:
0000000000000000
[ 108.424293] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 108.424305] CR2:
00007f82347a2000 CR3:
000000012c866000 CR4:
00000000000006e0
[ 108.424317] Call Trace:
[ 108.424368] i915_gem_gtt_reserve+0x67/0x80 [i915]
[ 108.424424] __i915_vma_do_pin+0x248/0x620 [i915]
[ 108.424487] ? __i915_vma_do_pin+0x162/0x620 [i915]
[ 108.424540] i915_gem_execbuffer_reserve_vma.isra.8+0x153/0x1f0 [i915]
[ 108.424591] i915_gem_execbuffer_reserve.isra.9+0x40e/0x440 [i915]
[ 108.424643] i915_gem_do_execbuffer.isra.15+0x6d9/0x1b20 [i915]
[ 108.424696] i915_gem_execbuffer2+0xc0/0x250 [i915]
[ 108.424712] drm_ioctl+0x200/0x450
[ 108.424760] ? i915_gem_execbuffer+0x330/0x330 [i915]
[ 108.424776] do_vfs_ioctl+0x90/0x6e0
[ 108.424789] ? up_read+0x1a/0x40
[ 108.424800] ? trace_hardirqs_on_caller+0x122/0x1b0
[ 108.424813] SyS_ioctl+0x3c/0x70
[ 108.424828] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 108.424839] RIP: 0033:0x7f8235867357
[ 108.424848] RSP: 002b:
00007ffdc14504c8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 108.424866] RAX:
ffffffffffffffda RBX:
00007ffdc1450600 RCX:
00007f8235867357
[ 108.424878] RDX:
00007ffdc14505a0 RSI:
0000000040406469 RDI:
0000000000000003
[ 108.424890] RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000022
[ 108.424903] R10:
0000000000000007 R11:
0000000000000246 R12:
0000000000000002
[ 108.424915] R13:
0000000000419101 R14:
00007ffdc1450600 R15:
00007ffdc14505f0
[ 108.424928] Code: 45 b8 8b 4d c0 4c 89 f2 48 89 de ff d0 49 8b 07 4c 8b 45 b8 48 85 c0 75 dd 65 ff 0d d4 a1 c8 5f 0f 84 47 01 00 00 e9 0d fe ff ff <0f> 0b 45 31 f6 4c 8b 65 c8 49 8b 04 24 4d 39 ec 49 8d 9c 24 28
[ 108.425055] RIP: i915_gem_evict_for_node+0x237/0x410 [i915] RSP:
ffffc90000a17a58
Fixes:
172ae5b4c8c1 ("drm/i915: Fix i915_gem_evict_for_vma (soft-pinning)")
Fixes:
606fec956c0e ("drm/i915: Prefer random replacement before eviction search")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111182132.19174-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 11 Jan 2017 14:08:58 +0000 (14:08 +0000)]
drm/i915: Add a sanity check that no request is submitted in the middle
It is an error to start a new request on the same timeline (ringbuffer)
as the current one before the current is submitted. If there are two
requests emitting to the ringbuffer at the same time, the operation is
undefined. We can catch this by checking for the timeline having a later
seqno than ours when we come to submit our request.
Currently we have this check at the end of __i915_add_request, but
having an early check as well isolates a failure in the caller versus a
failure in sealing the request (i.e. from inside __i915_add_request
itself). For example, CI is currently tripping over this late assertion
on ctg/ilk:
[ 100.329399] [IGT] gem_cs_tlb: starting subtest basic-default
[ 100.336333] ------------[ cut here ]------------
[ 100.336341] kernel BUG at drivers/gpu/drm/i915/i915_gem_request.c:908!
[ 100.336347] invalid opcode: 0000 [#1] PREEMPT SMP
[ 100.336351] Modules linked in: snd_hda_intel i915 snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm coretemp mei_me lpc_ich mei e1000e ptp pps_core [last unloaded: i915]
[ 100.336373] CPU: 0 PID: 6308 Comm: gem_cs_tlb Tainted: G U 4.10.0-rc3-CI-CI_DRM_2045+ #1
[ 100.336380] Hardware name: LENOVO 7465CTO/7465CTO, BIOS 6DET44WW (2.08 ) 04/22/2009
[ 100.336386] task:
ffff88012b738040 task.stack:
ffffc90000560000
[ 100.336441] RIP: 0010:__i915_add_request+0x4aa/0x510 [i915]
[ 100.336445] RSP: 0018:
ffffc90000563ac0 EFLAGS:
00010212
[ 100.336451] RAX:
0000000000005d52 RBX:
ffff880133bb84c0 RCX:
0000000000000001
[ 100.336456] RDX:
0000000080000001 RSI:
ffff88012b738860 RDI:
00000000ffffffff
[ 100.336461] RBP:
ffffc90000563b00 R08:
ffff880133bb8780 R09:
0000000000000000
[ 100.336466] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff88012f53d950
[ 100.336472] R13:
ffff88012a2b0af8 R14:
ffff88012a5b0008 R15:
ffff88012f53d960
[ 100.336477] FS:
00007f0d19da38c0(0000) GS:
ffff88013bc00000(0000) knlGS:
0000000000000000
[ 100.336483] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 100.336488] CR2:
00007f0d17706000 CR3:
000000012aa3e000 CR4:
00000000000406f0
[ 100.336496] Call Trace:
[ 100.336527] i915_gem_switch_to_kernel_context+0x131/0x1b0 [i915]
[ 100.336559] i915_gem_evict_vm+0x202/0x2b0 [i915]
[ 100.336590] i915_gem_execbuffer_reserve.isra.9+0x3ae/0x440 [i915]
[ 100.336623] i915_gem_do_execbuffer.isra.15+0x6d9/0x1b20 [i915]
[ 100.336656] i915_gem_execbuffer2+0xc0/0x250 [i915]
[ 100.336666] drm_ioctl+0x200/0x450
[ 100.336697] ? i915_gem_execbuffer+0x330/0x330 [i915]
[ 100.336708] do_vfs_ioctl+0x90/0x6e0
[ 100.336716] ? up_read+0x1a/0x40
[ 100.336723] ? trace_hardirqs_on_caller+0x122/0x1b0
[ 100.336730] SyS_ioctl+0x3c/0x70
[ 100.336738] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 100.336745] RIP: 0033:0x7f0d187cb357
[ 100.336750] RSP: 002b:
00007ffe0b2f7c28 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 100.336761] RAX:
ffffffffffffffda RBX:
00007ffe0b2f7d60 RCX:
00007f0d187cb357
[ 100.336768] RDX:
00007ffe0b2f7d00 RSI:
0000000040406469 RDI:
0000000000000003
[ 100.336775] RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000022
[ 100.336782] R10:
0000000000000007 R11:
0000000000000246 R12:
0000000000000002
[ 100.336789] R13:
0000000000419101 R14:
00007ffe0b2f7d60 R15:
00007ffe0b2f7d50
[ 100.336797] Code: 5f 74 1e e9 d4 fb ff ff e8 bc 1e 9c e0 e9 ae fb ff ff 4c 89 e7 e8 77 22 fd ff e9 88 fd ff ff 0f 0b e8 a3 1e 9c e0 e9 b1 fb ff ff <0f> 0b 0f 0b e8 fd af ab e0 85 c0 75 c2 48 c7 c2 80 2c 71 a0 be
[ 100.336877] RIP: __i915_add_request+0x4aa/0x510 [i915] RSP:
ffffc90000563ac0
[ 100.336886] ---[ end trace
22b36545479e5eb7 ]---
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111140858.1922-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 11 Jan 2017 11:23:12 +0000 (11:23 +0000)]
drm/i915: Prefer random replacement before eviction search
Performing an eviction search can be very, very slow especially for a
range restricted replacement. For example, a workload like
gem_concurrent_blit will populate the entire GTT and then cause aperture
thrashing. Since the GTT is a mix of active and inactive tiny objects,
we have to search through almost 400k objects before finding anything
inside the mappable region, and as this search is required before every
operation performance falls off a cliff.
Instead of performing the full search, we do a trial replacement of the
node at a random location fitting the specified restrictions. We lose
the strict LRU property of the GTT in exchange for avoiding the slow
search (several orders of runtime improvement for gem_concurrent_blit
4KiB-global-gtt, e.g. from 5000s to 20s). The loss of LRU replacement is
(later) mitigated firstly by only doing replacement if we find no
freespace and secondly by execbuf doing a PIN_NONBLOCK search first before
it starts thrashing (i.e. the random replacement will only occur from the
already inactive set of objects).
v2: Ascii-art, and check preconditionst
v3: Rephrase final sentence in comment to explain why we don't bother
with if (i915_is_ggtt(vm)) for preferring random replacement.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-3-chris@chris-wilson.co.uk
Chris Wilson [Wed, 11 Jan 2017 11:23:11 +0000 (11:23 +0000)]
drm/i915: Extract reserving space in the GTT to a helper
Extract drm_mm_reserve_node + calling i915_gem_evict_for_node into its
own routine so that it can be shared rather than duplicated.
v2: Kerneldoc
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: igvt-g-dev@lists.01.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 11 Jan 2017 11:23:10 +0000 (11:23 +0000)]
drm/i915: Use the MRU stack search after evicting
When we evict from the GTT to make room for an object, the hole we
create is put onto the MRU stack inside the drm_mm range manager. On the
next search pass, we can speed up a PIN_HIGH allocation by referencing
that stack for the new hole.
v2: Pull together the 3 identical implements (ahem, a couple were
outdated) into a common routine for allocating a node and evicting as
necessary.
v3: Detect invalid calls to i915_gem_gtt_insert()
v4: kerneldoc
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-1-chris@chris-wilson.co.uk
Nagaraju, Vathsala [Tue, 10 Jan 2017 07:02:26 +0000 (12:32 +0530)]
drm/i915/psr: disable psr2 for resolution greater than 32X20
PSR2 is restricted to work with panel resolutions upto 3200x2000,
move the check to intel_psr_match_conditions and fully block psr.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484031746-20874-1-git-send-email-vathsala.nagaraju@intel.com
Nagaraju, Vathsala [Mon, 2 Jan 2017 11:30:55 +0000 (17:00 +0530)]
drm/i915/psr: program vsc header for psr2
Function hsw_psr_setup handles vsc header setup for psr1 and
skl_psr_setup_vsc handles vsc header setup for psr2.
Setup VSC header in function skl_psr_setup_vsc for psr2 support,
as per edp 1.4 spec, table 6-11:VSC SDP HEADER Extension for psr2
operation.
v2: (Jani)
- Initialize variables to 0
- intel_dp_get_y_cord_status and intel_dp_get_y_cord_status made static
- Correct indentation for continuation lines
- Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED
- Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX_*
- Change VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED to DP_VSC_*
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483356663-32668-3-git-send-email-vathsala.nagaraju@intel.com
Nagaraju, Vathsala [Mon, 2 Jan 2017 11:30:54 +0000 (17:00 +0530)]
drm : adds Y-coordinate and Colorimetry Format
PSR2 vsc revision number hb2( as per table 6-11)is updated to
4 or 5 based on Y cordinate and Colorimetry Format as below
04h = 3D stereo + PSR/PSR2 + Y-coordinate.
05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry
Format indication. A DP Source device is allowed to indicate the pixel
encoding/colorimetry format to the DP Sink device with VSC SDP only when
the DP Sink device supports it (
i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in the
DPRX_FEATURE_ENUMERATION_LIST register (DPCD Address 02210h, bit 3;
is set to 1).
v2: (Jani)
- Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED.
- Add DP_PSR2_SU_GRANULARITY_REQUIRED.
- Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX.
- Add GTC_CAP and AV_SYNC_CAP, other bits in DPRX_FEATURE_ENUMERATION_LIST.
v3: (Jani)
- Add support for bits 7:4 and 1 as per DP v1.4 for
DPRX_FEATURE_ENUMERATION_LIST.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Patil Deepti <deepti.patil@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483356663-32668-2-git-send-email-vathsala.nagaraju@intel.com
Chris Wilson [Tue, 10 Jan 2017 14:47:34 +0000 (14:47 +0000)]
drm/i915: Replace 4096 with PAGE_SIZE or I915_GTT_PAGE_SIZE
Start converting over from the byte count to its semantic macro, either
we want to allocate the size of a physical page in main memory or we
want the size of a virtual page in the GTT. 4096 could mean either, but
PAGE_SIZE and I915_GTT_PAGE_SIZE are explicit and should help improve
code comprehension and future changes. In the future, we may want to use
variable GTT page sizes and so have the challenge of knowing which
hardcoded values were used to represent a physical page vs the virtual
page.
v2: Look for a few more 4096s to convert, discover IS_ALIGNED().
v3: 4096ul paranoia, make fence alignment a distinct value of 4096, keep
bdw stolen w/a as 4096 until we know better.
v4: Add asserts that i915_vma_insert() start/end are aligned to GTT page
sizes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110144734.26052-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Tue, 10 Jan 2017 17:22:46 +0000 (17:22 +0000)]
drm/i915: Rename i915_gem_engine_cleanup() to engine_set_wedged()
It has been some time since i915_gem_engine_cleanup was only called from
the module unload path, and now it is only called when the GPU is
wedged. Mika complained that the name is confusing, especially in light
of the existence of i915_gem_cleanup_engines().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110172246.27297-5-chris@chris-wilson.co.uk
Chris Wilson [Tue, 10 Jan 2017 17:22:45 +0000 (17:22 +0000)]
drm/i915: Mark all incomplete requests as -EIO when wedged
Similarly to a normal reset, after we mark the GPU as wedged (completely
fubar and no more requests can be executed), set the error status on all
the in flight requests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110172246.27297-4-chris@chris-wilson.co.uk
Chris Wilson [Tue, 10 Jan 2017 17:22:44 +0000 (17:22 +0000)]
drm/i915: Set an error status for a resubmitted request
Let userspace know if its request was resubmitted due to it being
executed at the time of a global reset. In this case, the reset was for
a guilty request on another engine, and this request was an innocent
victim that will be re-executed upon restarting. However, since it was
running at the time of the reset, we can not guarantee that it suffered
no ill-effects from the reset (e.g. some context state may be lost, or
some self-modifying fragment shaders will be restarted from the final
state not their initial state), to let userspace know that it has been
corrupted set a special value on the fence->error, -EAGAIN.
If the request does hang on resubmission, the error will be overwritten
with -EIO.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110172246.27297-3-chris@chris-wilson.co.uk
Chris Wilson [Tue, 10 Jan 2017 17:22:43 +0000 (17:22 +0000)]
drm/i915: Set guilty-flag on fence after detecting a hang
The struct dma_fence carries a status field exposed to userspace by
sync_file. This is inspected after the fence is signaled and can convey
whether or not the request completed successfully, or in our case if we
detected a hang during the request (signaled via -EIO in
SYNC_IOC_FILE_INFO).
v2: Mark all cancelled requests as failed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110172246.27297-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 10 Jan 2017 17:22:42 +0000 (17:22 +0000)]
drm/i915: Consolidate reset_request()
Always reset the requests of the guilty context, including the hung
request that we tell the hardware to skip. This should help if the
reprogram fails entirely, but more importantly makes the guilty path
more uniform (and simplifies the subsequent patch to tweak the cancelled
requests).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110172246.27297-1-chris@chris-wilson.co.uk
Tomeu Vizoso [Tue, 10 Jan 2017 13:43:05 +0000 (14:43 +0100)]
drm/i915: Put "cooked" vlank counters in frame CRC lines
Use drm_accurate_vblank_count so we have the full 32 bit to represent
the frame counter and userspace has a simpler way of knowing when the
counter wraps around.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110134305.26326-3-tomeu.vizoso@collabora.com
Tomeu Vizoso [Tue, 10 Jan 2017 13:43:04 +0000 (14:43 +0100)]
drm/i915: Use new CRC debugfs API
The core provides now an ABI to userspace for generation of frame CRCs,
so implement the ->set_crc_source() callback and reuse as much code as
possible with the previous ABI implementation.
When handling the pageflip interrupt, we skip 1 or 2 frames depending on
the HW because they contain wrong values. For the legacy ABI for
generating frame CRCs, this was done in userspace but now that we have a
generic ABI it's better if it's not exposed by the kernel.
v2:
- Leave the legacy implementation in place as the ABI implementation
in the core is incompatible with it.
v3:
- Use the "cooked" vblank counter so we have a whole 32 bits.
- Make sure we don't mess with the state of the legacy CRC capture
ABI implementation.
v4:
- Keep use of get_vblank_counter as in the legacy code, will be
changed in a followup commit.
v5:
- Skip first frame or two as it's known that they contain wrong
data.
- A few fixes suggested by Emil Velikov.
v6:
- Rework programming of the HW registers to preserve previous
behavior.
v7:
- Address whitespace issue.
- Added a comment on why in the implementation of the new ABI we
skip the 1st or 2nd frames.
v9:
- Add stub for intel_crtc_set_crc_source.
v12:
- Rebased.
- Remove stub for intel_crtc_set_crc_source and instead set the
callback to NULL (Jani Nikula).
v15:
- Rebased.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
irq
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110134305.26326-2-tomeu.vizoso@collabora.com
Daniel Vetter [Tue, 10 Jan 2017 16:03:46 +0000 (17:03 +0100)]
Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued
Pull in latest drm-next from Dave Airlie to get at all the drm-misc
goodies, specifically:
- dma_fence error state handling rework (Chris needs that for error
recovery)
- crc support locking changes (Tomeu's i915 crc patches need that).
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Chris Wilson [Tue, 10 Jan 2017 12:10:45 +0000 (12:10 +0000)]
drm/i915: Split out i915_gem_object_set_tiling()
Expose an interface for changing the tiling and stride on an object,
that includes the complexity of checking for conflicting bindings and
fence registers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110121045.27144-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 10 Jan 2017 12:10:44 +0000 (12:10 +0000)]
drm/i915: Include ioctl in set-tiling and get-tiling function names
Make it clear that these functions are the user entry points for
the tiling/fence registers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110121045.27144-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 10 Jan 2017 09:56:33 +0000 (09:56 +0000)]
drm/i915: Clip the partial view against the object not vma
The VMA is later clipped against the vm_area_struct before insertion of
the faulting PTE so we are free to create the partial view as we desire.
If we use the object as the extents rather than the area, this partial
can then be used for other areas.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110095633.6612-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 10 Jan 2017 09:56:32 +0000 (09:56 +0000)]
drm/i915: Extract compute_partial_view()
In order to reuse the partial view for selftesting, extract the common
function for computing the view.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110095633.6612-1-chris@chris-wilson.co.uk
Michel Thierry [Mon, 9 Jan 2017 14:51:35 +0000 (16:51 +0200)]
drm/i915/glk: Convert a few more IS_BROXTON() to IS_GEN9_LP()
Commit
cc3f90f0633c ("drm/i915/glk: Reuse broxton code for geminilake")
missed a few of occurences of IS_BROXTON() that should have been
coverted to IS_GEN9_LP().
v2: Cite the right commit. (Ander)
Fixes:
cc3f90f0633c ("drm/i915/glk: Reuse broxton code for geminilake")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> (v1)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483973495-15138-1-git-send-email-ander.conselvan.de.oliveira@intel.com
Rodrigo Vivi [Fri, 16 Dec 2016 15:42:25 +0000 (17:42 +0200)]
drm/i915/glk: Add missing bits to allow runtime pm suspend on GLK.
Besides having the DMC firmware in place and loaded let's
handle runtime suspend and dc9 as we do for Broxton.
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481902946-18593-2-git-send-email-ander.conselvan.de.oliveira@intel.com
Anusha Srivatsa [Fri, 16 Dec 2016 15:42:24 +0000 (17:42 +0200)]
drm/i915/DMC/GLK: Load DMC on GLK
This patch loads the DMC on GLK. There is a single
firmware image for all steppings on a GLK.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481902946-18593-1-git-send-email-ander.conselvan.de.oliveira@intel.com
Chris Wilson [Mon, 9 Jan 2017 16:16:13 +0000 (16:16 +0000)]
drm/i915: Move ggtt fence/alignment to i915_gem_tiling.c
Rename i915_gem_get_ggtt_size() and i915_gem_get_ggtt_alignment() to
i915_gem_fence_size() and i915_gem_fence_alignment() respectively to
better match usage. Similarly move the pair of functions into
i915_gem_tiling.c next to the fence restrictions.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-6-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Mon, 9 Jan 2017 16:16:12 +0000 (16:16 +0000)]
drm/i915: Remove the rounding down of the gen4+ fence region
Restricting the fence to the end of the previous tile-row breaks access
to the final portion of the object. On gen2/3 we employed lazy fencing
to pad out the fence with scratch page to provide access to the tail,
and now we also pad out the object on gen4+ we can apply the same fix.
Fixes:
af1a7301c7cf ("drm/i915: Only fence tiled region of object.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-5-chris@chris-wilson.co.uk
Chris Wilson [Mon, 9 Jan 2017 16:16:11 +0000 (16:16 +0000)]
drm/i915: Store required fence size/alignment for GGTT vma
The fence size/alignment is a combination of the vma size plus object
tiling parameters. Those parameters are rarely changed, making the fence
size/alignemnt roughly constant for the lifetime of the VMA. We can
simplify subsequent calculations by precalculating the size/alignment
required for GGTT vma taking fencing into account (with an update if we
do change the tiling or stride).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-4-chris@chris-wilson.co.uk
Chris Wilson [Mon, 9 Jan 2017 16:16:10 +0000 (16:16 +0000)]
drm/i915: Replace WARNs in fence register writes with extensive asserts
All of these conditions are prechecked by i915_tiling_ok() before we
allow setting the tiling/stride on the object and so we should never
fail asserting those conditions before writing the register.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-3-chris@chris-wilson.co.uk
Chris Wilson [Mon, 9 Jan 2017 16:16:09 +0000 (16:16 +0000)]
drm/i915: Align GGTT sizes to a fence tile row
Ensure the view occupies the full tile row so that reads/writes into the
VMA do not escape (via fenced detiling) into neighbouring objects - we
will pad the object with scratch pages to satisfy the fence. This
applies the lazy-tiling we employed on gen2/3 to gen4+.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-2-chris@chris-wilson.co.uk
Chris Wilson [Mon, 9 Jan 2017 16:16:08 +0000 (16:16 +0000)]
drm/i915: Extract tile_row_size for fencing
Computing the tile row size of a tiled object (for use with fence
registers) is repeated, so extract it to a common helper.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Dave Airlie [Mon, 9 Jan 2017 22:06:56 +0000 (08:06 +1000)]
Merge tag 'drm-misc-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-misc into drm-next
Back to regular -misc pulls with reasonable sizes:
- dma_fence error clarification (Chris)
- drm_crtc_from_index helper (Shawn), pile more patches on the m-l to roll
this out to drivers
- mmu-less support for fbdev helpers from Benjamin
- piles of kerneldoc work
- some polish for crc support from Tomeu and Benjamin
- odd misc stuff all over
* tag 'drm-misc-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
dma-fence: Introduce drm_fence_set_error() helper
dma-fence: Wrap querying the fence->status
dma-fence: Clear fence->status during dma_fence_init()
drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"
drm: Change the return type of the unload hook to void
drm: add more document for drm_crtc_from_index()
drm: remove useless parameters from drm_pick_cmdline_mode function
drm: crc: Call wake_up_interruptible() each time there is a new CRC entry
drm: allow to use mmuless SoC
drm: compile drm_vm.c only when needed
fbmem: add a default get_fb_unmapped_area function
drm: crc: Wait for a frame before returning from open()
drm: Move locking into drm_debugfs_crtc_crc_add
drm/imx: imx-tve: Remove unused variable
Revert "drm: nouveau: fix build when LEDS_CLASS=m"
drm: Add kernel-doc for drm_crtc_commit_get/put
drm/atomic: Fix outdated comment.
drm: reference count event->completion
gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap
drm: Document deprecated load/unload hook
...
Dave Airlie [Mon, 9 Jan 2017 22:02:09 +0000 (08:02 +1000)]
Merge tag 'drm-intel-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-intel into drm-next
More 4.11 stuff, holidays edition (i.e. not much):
- docs and cleanups for shared dpll code (Ander)
- some kerneldoc work (Chris)
- fbc by default on gen9+ too, yeah! (Paulo)
- fixes, polish and other small things all over gem code (Chris)
- and a few small things on top
Plus a backmerge, because Dave was enjoying time off too.
* tag 'drm-intel-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-intel: (275 commits)
drm/i915: Update DRIVER_DATE to
20170109
drm/i915: Drain freed objects for mmap space exhaustion
drm/i915: Purge loose pages if we run out of DMA remap space
drm/i915: Fix phys pwrite for struct_mutex-less operation
drm/i915: Simplify testing for am-I-the-kernel-context?
drm/i915: Use range_overflows()
drm/i915: Use fixed-sized types for stolen
drm/i915: Use phys_addr_t for the address of stolen memory
drm/i915: Consolidate checks for memcpy-from-wc support
drm/i915: Only skip requests once a context is banned
drm/i915: Move a few more utility macros to i915_utils.h
drm/i915: Clear ret before unbinding in i915_gem_evict_something()
drm/i915/guc: Exclude the upper end of the Global GTT for the GuC
drm/i915: Move a few utility macros into a separate header
drm/i915/execlists: Reorder execlists register enabling
drm/i915: Assert that we do create the deferred context
drm/i915: Assert all timeline requests are gone before fini
drm/i915: Revoke fenced GTT mmapings across GPU reset
drm/i915: enable FBC on gen9+ too
drm/i915: actually drive the BDW reserved IDs
...
Chris Wilson [Wed, 4 Jan 2017 14:12:22 +0000 (14:12 +0000)]
dma-fence: Introduce drm_fence_set_error() helper
The dma_fence.error field (formerly known as dma_fence.status) is an
optional field that may be set by drivers before calling
dma_fence_signal(). The field can be used to indicate that the fence was
completed in err rather than with success, and is visible to other
consumers of the fence and to userspace via sync_file.
This patch renames the field from status to error so that its meaning is
hopefully more clear (and distinct from dma_fence_get_status() which is
a composite between the error state and signal state) and adds a helper
that validates the preconditions of when it is suitable to adjust the
error field.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-3-chris@chris-wilson.co.uk
Matthew Auld [Tue, 13 Dec 2016 16:05:12 +0000 (16:05 +0000)]
drm/i915: don't open code the pdpe/pml4e clearing
Now that it's obvious what the helpers do, we can simplify the code
somewhat by using them when clearing the pdpe/pml4e with the relevant
scratch entry.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213160512.7008-1-matthew.auld@intel.com
Matthew Auld [Tue, 13 Dec 2016 16:05:11 +0000 (16:05 +0000)]
drm/i915: s/gen8_setup_page_directory_pointer/gen8_setup_pml4e/
The function name gen8_setup_page_directory_pointer is misleading, and
only serves to confuse the reader, it's not setting up a pdp, but
rather encoding a specific pml4e with a given pdp.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Matthew Auld [Tue, 13 Dec 2016 16:05:10 +0000 (16:05 +0000)]
drm/i915: s/gen8_setup_page_directory/gen8_setup_pdpe/
The function name gen8_setup_page_directory is misleading, and only
serves to confuse the reader, it's not setting up a pd, but rather
encoding a specific pdpe with a given pd.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 4 Jan 2017 14:12:21 +0000 (14:12 +0000)]
dma-fence: Wrap querying the fence->status
The fence->status is an optional field that is only valid once the fence
has been signaled. (Driver may fill the fence->status with an error code
prior to calling dma_fence_signal().) Given the restriction upon its
validity, wrap querying of the fence->status into a helper
dma_fence_get_status().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 4 Jan 2017 14:12:20 +0000 (14:12 +0000)]
dma-fence: Clear fence->status during dma_fence_init()
As the fence->status is an optional field that may be set before
dma_fence_signal() is called to convey that the fence completed with an
error, we have to ensure that it is always set to zero on initialisation
so that the typical use (i.e. unset) always flags a successful completion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-1-chris@chris-wilson.co.uk
Benjamin Gaignard [Sat, 7 Jan 2017 11:39:11 +0000 (12:39 +0100)]
drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"
Removing MMU configuration flag from DRM make few automatic
build failed when they answer yes to all flags.
Add asm/vga.h file on Blackfin architecture to not broke compilation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Fixes:
62a0d98a188c ("drm: allow to use mmuless SoC")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483789151-6603-1-git-send-email-benjamin.gaignard@linaro.org
Gabriel Krisman Bertazi [Fri, 6 Jan 2017 17:57:31 +0000 (15:57 -0200)]
drm: Change the return type of the unload hook to void
The integer returned by the unload hook is ignored by the drm core, so
let's make it void.
This patch was created using the following Coccinelle semantic script
(except for the declaration and comment in drm_drv.h):
Compile-tested only.
// <smpl>
@ get_name @
struct drm_driver drv;
identifier fn;
@@
drv.unload = fn;
@ replace_type @
identifier get_name.fn;
@@
- int
+ void
fn (...)
{
...
}
@ remove_return_param @
identifier get_name.fn;
@@
void fn (...)
{
<...
if (...)
return
- ...
;
...>
}
@ drop_final_return @
identifier get_name.fn;
@@
void fn (...)
{
...
- return 0;
}
// </smpl>
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106175731.29196-1-krisman@collabora.co.uk
Shawn Guo [Sat, 7 Jan 2017 08:52:11 +0000 (16:52 +0800)]
drm: add more document for drm_crtc_from_index()
Add a bit more document for function drm_crtc_from_index() to cross
link it with drm_crtc_from_index(), and explain that the function is
useful in vblank code.
While at it, add cross link comment for drm_plane_from_index() as well.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483779131-19935-1-git-send-email-shawnguo@kernel.org
Vincent Abriou [Fri, 6 Jan 2017 16:44:43 +0000 (17:44 +0100)]
drm: remove useless parameters from drm_pick_cmdline_mode function
drm_pick_cmdline_mode width and height parameters are useless.
Just remove them.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483721084-20278-2-git-send-email-vincent.abriou@st.com
Daniel Vetter [Mon, 9 Jan 2017 09:12:02 +0000 (10:12 +0100)]
drm/i915: Update DRIVER_DATE to
20170109
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Sun, 8 Jan 2017 23:55:57 +0000 (09:55 +1000)]
Merge tag 'drm-misc-next-2016-12-30' of git://anongit.freedesktop.org/git/drm-misc into drm-next
First -misc pull for 4.11:
- drm_mm rework + lots of selftests (Chris Wilson)
- new connector_list locking+iterators
- plenty of kerneldoc updates
- format handling rework from Ville
- atomic helper changes from Maarten for better plane corner-case handling
in drivers, plus the i915 legacy cursor patch that needs this
- bridge cleanup from Laurent
- plus plenty of small stuff all over
- also contains a merge of the 4.10 docs tree so that we could apply the
dma-buf kerneldoc patches
It's a lot more than usual, but due to the merge window blackout it also
covers about 4 weeks, so all in line again on a per-week basis. The more
annoying part with no pull request for 4 weeks is managing cross-tree
work. The -intel pull request I'll follow up with does conflict quite a
bit with -misc here. Longer-term (if drm-misc keeps growing) a
drm-next-queued to accept pull request for the next merge window during
this time might be useful.
I'd also like to backmerge -rc2+this into drm-intel next week, we have
quite a pile of patches waiting for the stuff in here.
* tag 'drm-misc-next-2016-12-30' of git://anongit.freedesktop.org/git/drm-misc: (126 commits)
drm: Add kerneldoc markup for new @scan parameters in drm_mm
drm/mm: Document locking rules
drm: Use drm_mm_insert_node_in_range_generic() for everyone
drm: Apply range restriction after color adjustment when allocation
drm: Wrap drm_mm_node.hole_follows
drm: Apply tight eviction scanning to color_adjust
drm: Simplify drm_mm scan-list manipulation
drm: Optimise power-of-two alignments in drm_mm_scan_add_block()
drm: Compute tight evictions for drm_mm_scan
drm: Fix application of color vs range restriction when scanning drm_mm
drm: Unconditionally do the range check in drm_mm_scan_add_block()
drm: Rename prev_node to hole in drm_mm_scan_add_block()
drm: Fix O= out-of-tree builds for selftests
drm: Extract struct drm_mm_scan from struct drm_mm
drm: Add asserts to catch overflow in drm_mm_init() and drm_mm_init_scan()
drm: Simplify drm_mm_clean()
drm: Detect overflow in drm_mm_reserve_node()
drm: Fix kerneldoc for drm_mm_scan_remove_block()
drm: Promote drm_mm alignment to u64
drm: kselftest for drm_mm and restricted color eviction
...
Linus Torvalds [Sun, 8 Jan 2017 22:18:17 +0000 (14:18 -0800)]
Linux 4.10-rc3
Linus Torvalds [Sun, 8 Jan 2017 19:42:04 +0000 (11:42 -0800)]
Merge tag 'usb-4.10-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an
artifact of the holiday break I think.
Lots of gadget and the usual XHCI fixups for reported issues (one day
that driver will calm down...) Also included are a bunch of usb-serial
driver fixes, and for good measure, a number of much-reported MUSB
driver issues have finally been resolved.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits)
USB: fix problems with duplicate endpoint addresses
usb: ohci-at91: use descriptor-based gpio APIs correctly
usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
usb: hub: Move hub_port_disable() to fix warning if PM is disabled
usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
usb: musb: fix compilation warning on unused function
usb: musb: Fix trying to free already-free IRQ 4
usb: musb: dsps: implement clear_ep_rxintr() callback
usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
USB: serial: ti_usb_3410_5052: fix NULL-deref at open
USB: serial: spcp8x5: fix NULL-deref at open
USB: serial: quatech2: fix sleep-while-atomic in close
USB: serial: pl2303: fix NULL-deref at open
USB: serial: oti6858: fix NULL-deref at open
USB: serial: omninet: fix NULL-derefs at open and disconnect
USB: serial: mos7840: fix misleading interrupt-URB comment
USB: serial: mos7840: remove unused write URB
USB: serial: mos7840: fix NULL-deref at open
USB: serial: mos7720: remove obsolete port initialisation
USB: serial: mos7720: fix parallel probe
...
Linus Torvalds [Sun, 8 Jan 2017 19:37:44 +0000 (11:37 -0800)]
Merge tag 'char-misc-4.10-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are a few small char/misc driver fixes for 4.10-rc3.
Two MEI driver fixes, and three NVMEM patches for reported issues, and
a new Hyper-V driver MAINTAINER update. Nothing major at all, all have
been in linux-next with no reported issues"
* tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
hyper-v: Add myself as additional MAINTAINER
nvmem: fix nvmem_cell_read() return type doc
nvmem: imx-ocotp: Fix wrong register size
nvmem: qfprom: Allow single byte accesses for read/write
mei: move write cb to completion on credentials failures
mei: bus: fix mei_cldev_enable KDoc
Linus Torvalds [Sun, 8 Jan 2017 19:22:00 +0000 (11:22 -0800)]
Merge tag 'staging-4.10-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are some staging and IIO driver fixes for 4.10-rc3.
Most of these are minor IIO fixes of reported issues, along with one
network driver fix to resolve an issue. And a MAINTAINERS update with
a new mailing list. All of these, except the MAINTAINERS file update,
have been in linux-next with no reported issues (the MAINTAINERS patch
happened on Friday...)"
* tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
MAINTAINERS: add greybus subsystem mailing list
staging: octeon: Call SET_NETDEV_DEV()
iio: accel: st_accel: fix LIS3LV02 reading and scaling
iio: common: st_sensors: fix channel data parsing
iio: max44000: correct value in illuminance_integration_time_available
iio: adc: TI_AM335X_ADC should depend on HAS_DMA
iio: bmi160: Fix time needed to sleep after command execution
iio: 104-quad-8: Fix active level mismatch for the preset enable option
iio: 104-quad-8: Fix off-by-one errors when addressing IOR
iio: 104-quad-8: Fix index control configuration