drm: Add color management LUT validation helper (v4)

Some hardware may place additional restrictions on the gamma/degamma
curves described by our LUT properties.  E.g., that a gamma curve never
decreases or that the red/green/blue channels of a LUT's entries must be
equal.  Let's add a helper function that drivers can use to test that a
userspace-provided LUT is valid and doesn't violate hardware
requirements.

v2:
 - Combine into a single helper that just takes a bitmask of the tests
   to apply.  (Brian Starkey)
 - Add additional check (always performed) that LUT property blob size
   is always a multiple of the LUT entry size.  (stolen from ARM driver)

v3:
 - Drop the LUT size check again since
   drm_atomic_replace_property_blob_from_id() already covers this for
   us.  (Alexandru Gheorghe)

v4:
 - Use an enum to describe possible test values rather than #define's;
   this is cleaner to provide kerneldoc for.  (Daniel Vetter)
 - s/DRM_COLOR_LUT_INCREASING/DRM_COLOR_LUT_NON_DECREASING/.  (Ville)

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217224415.12848-1-matthew.d.roper@intel.com

drm/i915/execlists: Mark up priority boost on preemption

Record the priority boost we giving to the preempted client or else we
may end up in a situation where the priority queue no longer matches the
request priority order and so we can end up in an infinite loop of
preempting the same pair of requests.

Fixes: e9eaf82d97a2 ("drm/i915: Priority boost for waiting clients")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123135155.21562-1-chris@chris-wilson.co.uk

drm/i915/icl: Adding few more device IDs for Ice Lake

We just got aware that there was more IDs available
at spec, so let's add them already.

Cc: James Ausmus <james.ausmus@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118055943.10252-1-rodrigo.vivi@intel.com

drm/i915/icl: do a posting read after irq install

When reading GEN11_GT_INTR_DWx closely after enabling the interrupts
in gen11_irq_postinstall, the returned value is garbage. This can
cause other parts of the setup code (e.g. gen11_reset_one_iir) to
think that there are interrupts to be cleared when there are none.

The garbage value is only seen on the first read done after the enable,
so this looks like a posting issue. Adding a posting read after enabling
the interrupts does indeed fix the problem.

Note that the posting read has been purposely added outside of
gen11_master_intr_enable since the issue has only been observed when the
full interrupt setup is performed.

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123023227.8117-1-daniele.ceraolospurio@intel.com

drm/i915/sdvo: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

v2: rebase

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-1-jani.nikula@intel.com

drm/i915/debugfs: Print PSR selective update status register values

The value of this registers will be used to test if PSR2 is doing
selective update and if the number of blocks match with the expected.

v2:
- Using new macros
- Changed the string output

v3:
- reading PSR2_SU_STATUS registers together(Dhinakaran)
- printing SU blocks of frames with 0 updates(Dhinakaran)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-4-jose.souza@intel.com

drm/i915: Add PSR2 selective update status registers and bits definitions

This register contains how many blocks was sent in the past selective
updates.
Those registers are not kept set all the times but polling it after flip
can show the values corresponding to the last 8 frames.

v2: Improved macros(Dhinakaran)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-3-jose.souza@intel.com

drm/i915: Refactor PSR status debugfs

The old debugfs fields was not following a naming partern and it was
a bit confusing.

So it went from:
~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status
Sink_Support: yes
PSR mode: PSR1
Enabled: yes
Busy frontbuffer bits: 0x000
Main link in standby mode: no
HW Enabled & Active bit: yes
Source PSR status: 0x24050006 [SRDONACK]

To:
~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status
Sink support: yes [0x03]
PSR mode: PSR1 enabled
Source PSR ctl: enabled [0x81f00e26]
Source PSR status: IDLE [0x04010006]
Busy frontbuffer bits: 0x00000000

The 'Main link in standby mode' was removed as it is not useful but
if needed by someone the information is still in the register value
of 'Source PSR ctl' inside of the brackets, PSR mode and Enabled was
squashed into PSR mode, some renames and reorders and we have this
cleaner version. This will also make easy to parse debugfs for IGT
tests.

v2: Printing sink PSR version with only 2 hex digits as it is a byte

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Suggested-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-2-jose.souza@intel.com

drm/i915/psr: Allow PSR2 to be enabled when debugfs asks

For now PSR2 is still disabled by default for all platforms but is
our intention to let debugfs to enable it for debug and tests
proporses, so intel_psr2_enabled() that is also used by debugfs to
decide if PSR2 is going to be enabled needs to take in consideration
the debug field.

v2: Using the switch/case that intel_psr2_enabled() already had to
handle this(DK)

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-1-jose.souza@intel.com

Merge drm/drm-next into drm-intel-next-queued

We need avi infoframe stuff who got merged via drm-misc

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Show all active engines on hangcheck

This turns out to be quite useful if one happens to be debugging
semaphore deadlocks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-4-chris@chris-wilson.co.uk

drm/i915: Tidy common test_bit probing of i915_request->fence.flags

A repeated pattern is to test the signaled bit of our
request->fence.flags. Make this an inline to shorten a few lines and
remove unnecessary line continuations.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-20-chris@chris-wilson.co.uk

drm/i915: Refactor out intel_context_init()

Prior to adding a third instance of intel_context_init() and extending
the information stored therewithin, refactor out the common assignments.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-8-chris@chris-wilson.co.uk

drm/i915/selftests: Use common mock_engine::advance

Replace the open-coding of advance with a call instead.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-19-chris@chris-wilson.co.uk

drm/i915/selftests: Refactor common live_test framework

Before adding yet another copy of struct live_test and its handler,
refactor the existing code into a common framework for live selftests.
For many live selftests, we want to know if the GPU hung or otherwise
misbehaved during the execution of the test (beyond any infraction in
the behaviour under test), live_test provides this by comparing the
GPU state before and after, alerting if it unexpectedly changed (e.g.
the reset counter changed). It also ensures that the GPU is idle before
and after the test, so that residual code running on the GPU is flushed
before testing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-5-chris@chris-wilson.co.uk

drm/i915/selftests: Create a clean GGTT for vma/gtt selftesting

Some tests (e.g. igt_vma_pin1) presume that we have a completely clean
GGTT so that it can probe boundaries without fear that something is
already allocated there. However, the mock device is starting to get
complicated and following similar rules to the live device, i.e. we
can't guarantee that i915->ggtt remains clean, so create a temporary
address_space equivalent to the mock ggtt for the purpose.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-7-chris@chris-wilson.co.uk

drm/i915/selftests: Track evict objects explicitly

During review of commit 71fc448c1aaf ("drm/i915/selftests: Make evict
tolerant of foreign objects"), Matthew mentioned it would be better if
we explicitly tracked the objects we created. We have an obj->st_link
hook for this purpose, so add the corresponding list of objects and
reduce our loops to only consider our own list.

References: 71fc448c1aaf ("drm/i915/selftests: Make evict tolerant of foreign objects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-6-chris@chris-wilson.co.uk

drm/i915/dsi: Enable dithering for 6 bpc panels

The display engine has 2 dithering enable bits which both need to be set
for dithering to happen, 1 in the PIPECONF register which is taken care of
by i9xx_set_pipeconf() and a second bit at the encoder level.

The dsi code was not setting the encoder level dithering enable bit causing
dithering to be disabled, this commit fixes this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201113148.23184-2-hdegoede@redhat.com

drm/i915/dsi: Fix pipe_bpp for handling for 6 bpc pixel-formats

There are 3 problems with the dsi code's pipe_bpp handling for 6 bpc
pixel-formats which this commit addresses:

1) It assumes that the pipe_bpp is the same as the bpp going over the dsi
lanes. This assumption is not valid for MIPI_DSI_FMT_RGB666, where pipe_bpp
should be 18 so that we do proper dithering but we actually send 24 bpp
over the dsi lanes (MIPI_DSI_FMT_RGB666_PACKED sends 18 bpp).

This assumption is enforced by an assert in *_dsi_get_pclk(). This assert
triggers on the initial hw-state readback on BYT/CHT devices which use
MIPI_DSI_FMT_RGB666, such as the Prowise PT301 tablet. PIPECONF is set to
6BPC / 18 bpp by the GOP, while mipi_dsi_pixel_format_to_bpp() returns 24.

This commits switches the calculations in *_dsi_get_pclk() to use the bpp
from mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format) which
returns the bpp going over the mipi lanes and drops the assert.

2) On BXT bxt_dsi_get_pipe_config() wrongly overrides the pipe_bpp which
i9xx_get_pipe_config() reads from PIPECONF with the return value from
mipi_dsi_pixel_format_to_bpp(). This avoids the assert from 1. but is wrong
since the pipe is actually running at the value configured in PIPECONF.

This commit drops the override of pipe_bpp from bxt_dsi_get_pipe_config().

3) The dsi encoder's compute_config() never assigns a value to pipe_bpp,
unlike most other encoders. Falling back on compute_baseline_pipe_bpp()
which always picks 24. 24 is only correct for MIPI_DSI_FMT_RGB88 for the
others we should use 18 bpp so that we correctly do 6bpc color dithering.

This commit adds code to intel_dsi_compute_config() to properly set
pipe_bpp based on intel_dsi->pixel_format.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201113148.23184-1-hdegoede@redhat.com

drm/i915: Prevent use of global_seqno=0

We are not allowed to assign rq->global_seqno=0 as it has a special
meaning of "inactive" (not executing on HW).

Fixes: 6faf5916e6be ("drm/i915: Remove HW semaphores for gen7 inter-engine synchronisation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190119143024.26971-1-chris@chris-wilson.co.uk

drm/i915/intel_drv.h: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch fixes sprinkled on top of the changed lines.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-8-jani.nikula@intel.com

drm/i915/i915_drv.h: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-7-jani.nikula@intel.com

drm/i915/display: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-6-jani.nikula@intel.com

drm/i915/csr: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch/whitepace fixes sprinkled on top of the changed lines.

v2: more whitespace fixes (Ville, José)

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-5-jani.nikula@intel.com

drm/i915/ddi: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-4-jani.nikula@intel.com

drm/i915/pm: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch fixes sprinkled on top of the changed lines.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-3-jani.nikula@intel.com

drm/i915/color: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-2-jani.nikula@intel.com

drm/i915/selftests: Allocate mock ring/timeline per context

To correctly simulate preemption between contexts, we need independent
timelines along each context. Make it so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118190805.11792-1-chris@chris-wilson.co.uk

drm/i915/dp: remove PANEL_POWER_OFF macro and its use

It's superfluous.

Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7987938a7950853ac3ee43c82fb9cbb0cd59a2fa.1547726792.git.jani.nikula@intel.com

drm/i915/selftests: Make evict tolerant of foreign objects

The evict selftests presumed that all objects in use had been allocated
by itself. This is a dubious claim and so instead of asserting complete
control over the object lists, take (temporary) ownership of them
instead.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118113632.7056-1-chris@chris-wilson.co.uk

drm/i915: Use b->irq_enable() as predicate for mock engine

Since commit  d4ccceb05591 ("drm/i915/icl: Ringbuffer interrupt handling")
we have required a mechanism to avoid touching the interrupt hardware
for breadcrumbs, superseding our mock interface for selftests.

The residual problem (ideas welcome) is in probing the mock ring
registers for ring_is_idle. Hmm, maybe we should just install
mock handlers for i915->uncore.mmio__write and friends? Only problem
being is that we would to truly mock some expected reads. :(

References: d4ccceb05591 ("drm/i915/icl: Ringbuffer interrupt handling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118112225.13780-1-chris@chris-wilson.co.uk

drm/i915/selftests: Query the vm under test for hugepage support

Since we have the ppgtt we want to test, we can ask it directly if it is
suitable for the hugepage test we intend to undertake.

v2: Not everyone has full-ppgtt

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117230512.4789-1-chris@chris-wilson.co.uk

drm/i915/breadcrumbs: Drop assertion that we've already enabled irqs

The motivation for introducing the check that we only enable breadcrumb
irqs if the device's irq was installed was once upon a time we waited
during suspend after disabling interrupts (which was quite slow until
the bug was discovered). Since then we have the notion of pinning the
breadcrumb irq, broadening it from the sole purpose of user interrupt
notification and waiting, and more importantly decoupling it from a very
defined time period during which enabling the irq was expected. So stop
insisting the irq is installed before we setup our IMR masks, if the IER
isn't yet enabled, nothing will happen and we will timeout instead,
revealing the lack of irq in the hang debug messages.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117233126.30165-1-chris@chris-wilson.co.uk

drm/i915: Fix wakeref cookie handling in debugfs/i915_forcewake_user

To avoid a false positive of a leaked wakeref, we can store the cookie
in file->private_data and use it in intel_runtime_pm_put.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117144831.13156-1-tvrtko.ursulin@linux.intel.com

Merge tag 'drm-misc-next-2019-01-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.1:

UAPI Changes:
 - New fourcc identifier for ARM Framebuffer Compression v1.3

Cross-subsystem Changes:

Core Changes:
 - Reorganisation of drm_device and drm_framebuffer headers
 - Cleanup of the drmP inclusion
 - Fix leaks in the fb-helpers
 - Allow for depth different from bpp in fb-helper fbdev emulation
 - Remove drm_mode_object from drm_display_mode

Driver Changes:
 - Add reflection properties to rockchip
 - a bunch of fixes for virtio
 - a bunch of fixes for dp_mst and drivers using it, and introduction of a
   new refcounting scheme
 - Convertion of bochs to atomic and generic fbdev emulation
 - Allow meson to remove the firmware framebuffers

[airlied: patch rcar-du to add drm_modes.h]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190116200428.u2n4jbk4mzza7n6e@flea

drm/i915: Limit the for_each_set_bit() to the valid range

Let static analyzers (smatch) know that we are not going to wander off
the end of the array by providing a tight upper bound:

drivers/gpu/drm/i915/intel_display.c:9532 hsw_get_transcoder_state() error: buffer overflow 'dev_priv->__info.trans_offsets' 6 <= 31

References: 0716931a82b4 ("drm/i915/icl: fix transcoder state readout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190116155421.7660-1-chris@chris-wilson.co.uk

Merge tag 'du-next-20190114' of git://linuxtv.org/pinchartl/media into drm-next

Renesas display drivers changes for v5.1:

- R8A774C0 support
- D3/E3 RGB output routing fixes
- Miscellaneous fixes
- Constify drm_bridge .mode_set() arguments

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1743477.dgErSCK0Q8@avalon

drm/i915/sprite: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/63fe4b9727b55727190e50e57427f513d204f000.1547629303.git.jani.nikula@intel.com

drm/i915/dp: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch/whitespace fixes sprinkled on top of the changed lines.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3c030a12b4313eec512ce2b7a953cff439d8af67.1547629303.git.jani.nikula@intel.com

drm/i915/dpll_mgr: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch/whitespace fixes sprinkled on top of the changed lines.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b73aefabb757acf59896bd77dbb20c2e343c6e6d.1547629303.git.jani.nikula@intel.com

drm/i915/cdclk: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b56d250007a5d85d15038962548abb3e1818480a.1547629303.git.jani.nikula@intel.com

drm/i915/irq: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/841f4eac1c52f4ed3efe2ac9e343d6640c03b774.1547629303.git.jani.nikula@intel.com

drm/i915/debugfs: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4d71ed8a432b4121516049334512d35623c8acaa.1547629303.git.jani.nikula@intel.com

drm/i915/lspcon: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0c2d399bfb8fd9f90c7899eaaa0a9cab82f0d68d.1547629303.git.jani.nikula@intel.com

drm/i915/crt: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4deb1838b288e027b6483e7ebd6b7b365d0ef979.1547629303.git.jani.nikula@intel.com

drm/i915: small isolated c99 types to kernel types switch

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch fixes sprinkled on top of the changed lines.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14ed72e7f04c9340a057855c5950b54811f8a477.1547629303.git.jani.nikula@intel.com

drm/i915: Pull all the reset functionality together into i915_reset.c

Currently the code to reset the GPU and our state is spread widely
across a few files. Pull the logic together into a common file.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190116153304.787-1-chris@chris-wilson.co.uk

drm/i915: Serialise concurrent calls to i915_gem_set_wedged()

Make i915_gem_set_wedged() and i915_gem_unset_wedged() behaviour more
consistent if called concurrently, and only do the wedging and reporting
once, curtailing any possible race where we start unwedging in the middle
of a wedge.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114210408.4561-2-chris@chris-wilson.co.uk

drm/i915: Pass down rc in intel_encoder->compute_config()

Something that I completely missed when implementing the new MST VCPI
atomic helpers is that with those helpers, there's technically a chance
of us having to grab additional modeset locks in ->compute_config() and
furthermore, that means we have the potential to hit a normal modeset
deadlock. However, because ->compute_config() only returns a bool this
means we can't return -EDEADLK when we need to drop locks and try again
which means we end up just failing the atomic check permanently. Whoops.

So, fix this by modifying ->compute_config() to pass down an actual
error code instead of a bool so that the atomic check can be restarted
on modeset deadlocks.

Thanks to Ville Syrjälä for pointing this out!

Changes since v1:
* Add some newlines
* Return only -EINVAL from hsw_crt_compute_config()
* Propogate return code from intel_dp_compute_dsc_params()
* Change all of the intel_dp_compute_link_config*() variants
* Don't miss if (hdmi_port_clock_valid()) branch in
  intel_hdmi_compute_config()

[Cherry-picked from drm-misc-next to drm-intel-next-queued to fix
 linux-next & drm-tip conflict, while waiting for proper propagation of
 the DP MST series that this commit fixes. In hindsight, a topic branch
 might have been a better approach for it.]

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109320
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115200800.3121-1-lyude@redhat.com
(cherry picked from commit 96550555a78ca3c9fda4b358549a5622810fe32c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

drm: fix alpha build after drm_util.h change

0-DAY reported the following bug:

tree:   git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
head:   21376e2c3c5bad5e87ba700c055c8a8235c2bfd5
commit: e9eafcb589213395232084a2378e2e90f67feb29 [1/2] drm: move drm_can_sleep() to drm_util.h
config: alpha-allmodconfig (attached as .config)
...
   In file included from include/linux/irqflags.h:16:0,
                    from include/drm/drm_util.h:35,
                    from drivers/gpu/drm/qxl/qxl_cmd.c:28:
>> arch/alpha/include/asm/irqflags.h:58:15: error: unknown type name 'bool'
    static inline bool arch_irqs_disabled_flags(unsigned long flags)
                  ^~~~

And later following bug:
tree:   git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
head:   21376e2c3c5bad5e87ba700c055c8a8235c2bfd5
commit: e9eafcb589213395232084a2378e2e90f67feb29 [1/2] drm: move drm_can_sleep() to drm_util.h
config: ia64-allyesconfig (attached as .config)
...
   In file included from arch/ia64/include/asm/irqflags.h:14,
                    from include/linux/irqflags.h:16,
                    from include/drm/drm_util.h:35,
                    from drivers/gpu/drm/qxl/qxl_cmd.c:28:
   arch/ia64/include/asm/pal.h: In function 'ia64_pal_tr_read':
   arch/ia64/include/asm/pal.h:1703:64: error: implicit declaration of function 'ia64_tpa'; did you mean 'ia64_pal'?  [-Werror=implicit-function-declaration]
     PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer));
                                                                   ^~~~~~~~
...

So we have a situation where we do not pull in <linux/types.h>
when building for alpha and for ia64 we need even more definitions
are required.

Two invasive fixes where considered:
- Change all declarations of arch_irqs_disabled_flags() to use bool
- Add include of <linux/types.h> to all files that uses bool for
  arch_irqs_disabled_flags

To invasive with a too high pain/benefit ratio, so dropped.
They would not cover ia64 either.

Some less invasive fixes was also considered:
- Add include of <linux/types.h> to drm_util.h
- Add include of <linux/interrupt.h> to drm_util.h

The first was dropped as this did not cover the ia64 case.

The latter was considered the best option as there could
be other similar cases and we would like the header files below
include/drm/ to be selfcontained.
So we end up pulling in a lot of stuff not needed, but this is
the price we pay in drm/ because the kernel headers are not all
selfcontained.

While at it, ordred the includefiles in drm_util in alphabetical order.

Build tested with alpha,ia64,arm,x86 with allmodconfig and allyesconfig.

v2:
- fix ia64 build, changed to include interrupt.h
- sort include files alphabetically

Fixes: 733748ac37b45 ("drm: move drm_can_sleep() to drm_util.h")
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115214845.8117-1-sam@ravnborg.org

drm/i915/userptr: Fix error handling of mutex_lock_killable()

mutex_lock_killable() returns -EINTR on failure, not the anticipate bool
return like trylock. (Oh no, not again.)

Fixes: 484d9a844d0d ("drm/i915/userptr: Avoid struct_mutex recursion for mmu_invalidate_range_start")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115221118.13304-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

dt-bindings: panel: Add missing .txt suffix

All other files in that directory have a .txt suffix, so add one for
consistency.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203161310.15438-1-thierry.reding@gmail.com

drm/i915: Move intel_execlists_show_requests() aside

Move the debug pretty printer into a standalone routine prior to
extending it in upcoming feature work.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115212948.10423-1-chris@chris-wilson.co.uk

drm/i915: Pass down rc in intel_encoder->compute_config()

Something that I completely missed when implementing the new MST VCPI
atomic helpers is that with those helpers, there's technically a chance
of us having to grab additional modeset locks in ->compute_config() and
furthermore, that means we have the potential to hit a normal modeset
deadlock. However, because ->compute_config() only returns a bool this
means we can't return -EDEADLK when we need to drop locks and try again
which means we end up just failing the atomic check permanently. Whoops.

So, fix this by modifying ->compute_config() to pass down an actual
error code instead of a bool so that the atomic check can be restarted
on modeset deadlocks.

Thanks to Ville Syrjälä for pointing this out!

Changes since v1:
* Add some newlines
* Return only -EINVAL from hsw_crt_compute_config()
* Propogate return code from intel_dp_compute_dsc_params()
* Change all of the intel_dp_compute_link_config*() variants
* Don't miss if (hdmi_port_clock_valid()) branch in
  intel_hdmi_compute_config()

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109320
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115200800.3121-1-lyude@redhat.com

drm/i915/userptr: Avoid struct_mutex recursion for mmu_invalidate_range_start

Since commit 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu
notifiers") we have been able to report failure from
mmu_invalidate_range_start which allows us to use a trylock on the
struct_mutex to avoid potential recursion and report -EBUSY instead.
Furthermore, this allows us to pull the work into the main callback and
avoid the sleight-of-hand in using a workqueue to avoid lockdep.

However, not all paths to mmu_invalidate_range_start are prepared to
handle failure, so instead of reporting the recursion, deal with it by
propagating the failure upwards, who can decide themselves to handle it
or report it.

v2: Mark up the recursive lock behaviour and comment on the various weak
points.

v3: Follow commit 3824e41975ae ("drm/i915: Use mutex_lock_killable() from
inside the shrinker") and also use mutex_lock_killable().
v3.1: No leak on EINTR.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108375
References: 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115124442.3500-1-chris@chris-wilson.co.uk

staging/vboxvideo: Don't set FBINFO_MISC_ALWAYS_SETPAR

It's a debug hack flag useful to work around driver bugs. That's not a
good idea for a new driver. Especially for a new drm driver.

Aside: the fbdev support should probably be converted over to the new
generic fbdev support.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115102755.16183-1-daniel.vetter@ffwll.ch

drm/i915/icl: Detect port F presence via VBT

Registering an output for a non-existent port (on a given SKU) can lead
to problems when trying to use the port, for instance timeouts during
power well enabling. Since there are no strap bits for port detection we
have to rely on VBT for this, so do that here.

There are no known SKUs where any of the A-E ports are non-existent, so
to reduce the likelihood of breakage due to incorrect VBT information,
do this detection only for port F (which is known to be missing on some
ICL SKUs).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108915
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181220132604.25222-2-imre.deak@intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/ddi: Move DDI port detection to the corresponding helper

We have already a function to detect DDI ports using VBT, so instead of
opencoding the DDI specific version of this, move the opencoded part to
the existing helper.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181220132604.25222-1-imre.deak@intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Only dump GPU state on set-wedged if interesting

As we may frequently mark the device as wedged to flush requests off it
during the normal course of events, quite often we have a large state
dump that is of no interest. Don't bother dumping it all if the engines
are all idle.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115122057.1677-1-chris@chris-wilson.co.uk

MAINTAINERS: Add entry for VKMS

Add maintainers and reviewers for VKMS driver

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190113204038.bvdc6d5tyxjz6bzf@smtp.gmail.com

drm: Complete remove drm_mode_object dependency

This patch finalizes the KMS cleanup task dependency from
drm_display_mode. It removes the use of drm_mode_object
from drm_display_mode struct and it removes the use of
base.id and base.type from drm_display_mode struct
print string.

Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/f40e904e665fe3e3ae3ae86e837024bee3b8ca6d.1547214023.git.shayenneluzmoura@gmail.com

drm: Remove use of drm_mode_object

This patch removes the drm_mode_object prints, evaluation and use from
drm_display_mode objects used in drm files. It removes dependency from
drm_mode_object.

Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/785896b0a551464d0b780a55411707300802d6b6.1547214023.git.shayenneluzmoura@gmail.com

drm: armada: Cleanup drm_display_mode print str

This patch adjust the print string of drm_display_mode object
to remove drm_mode_object dependency in armada files.

Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/dddd98f1a6687a37444d315adc4cbd8a692a8131.1547214023.git.shayenneluzmoura@gmail.com

drm/dp: annotate implicit fall throughs

There is a plan to build the kernel with -Wimplicit-fallthrough and
these places in the code produced warnings (W=1). Fix them up.

This commit remove the following warnings:

  include/linux/compiler.h:77:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
  include/asm-generic/bug.h:134:2: note: in expansion of macro 'unlikely'
  drivers/gpu/drm/drm_dp_helper.c:155:3: note: in expansion of macro 'WARN'
  include/linux/compiler.h:77:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
  include/asm-generic/bug.h:134:2: note: in expansion of macro 'unlikely'
  drivers/gpu/drm/drm_dp_helper.c:173:3: note: in expansion of macro 'WARN'
  drivers/gpu/drm/drm_dp_helper.c:547:3: warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114202748.15584-1-malat@debian.org

drm/i915/perf: Annotate i915_perf.wakeref for keneldoc

drivers/gpu/drm/i915/i915_drv.h:1375: warning: Function parameter or member 'wakeref' not described in 'i915_perf_stream'

Reported-by: kbuild-all@01.org
Fixes: 6619c0075f78 ("drm/i915/perf: Track the rpm wakeref")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115102505.4843-1-chris@chris-wilson.co.uk

drm/fourcc: Add modifier defininitions for AFBC 1.3

This commit adds definitions of format modifiers for version 1.3 of the
Arm Framebuffer Compression (AFBC).

Signed-off-by: Matteo Franchin <matteo.franchin@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/277333/

drm/i915: Fix the static code analysis warning in debugfs

intel_dp->dsc_dpcd is defined as an array making the if check redundant.

Fixes: e845f099f1c6 ("drm/i915/dsc: Add Per connector debugfs node for DSC support/enable")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109211414.15622-1-radhakrishna.sripada@intel.com

drm/i915/cnl: Fix CNL macros for Voltage Swing programming

CNL macros for register groups CNL_PORT_TX_DW2_* / CNL_PORT_TX_DW5_* are
configured incorrectly wrt definition of _CNL_PORT_TX_DW_GRP.

v2: Jani suggested to keep the macros organized semantically i.e., by
function, secondarily by port/pipe/transcoder.->(dw, port)

Fixes: 4e53840fdfdd ("drm/i915/icl: Introduce new macros to get combophy registers")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110230844.9213-1-aditya.swarup@intel.com

drm/i915: Prevent concurrent GGTT update and use on Braswell (again)

On Braswell, under heavy stress, if we update the GGTT while
simultaneously accessing another region inside the GTT, we are returned
the wrong values. To prevent this we stop the machine to update the GGTT
entries so that no memory traffic can occur at the same time.

This was first spotted in

commit 5bab6f60cb4d1417ad7c599166bcfec87529c1a2
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Oct 23 18:43:32 2015 +0100

    drm/i915: Serialise updates to GGTT with access through GGTT on Braswell

but removed again in forlorn hope with

commit 4509276ee824bb967885c095c610767e42345c36
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Feb 20 12:47:18 2017 +0000

    drm/i915: Remove Braswell GGTT update w/a

However, gem_concurrent_blit is once again only stable with the patch
applied and CI is detecting the odd failure in forked gem_mmap_gtt tests
(which smell like the same issue). Fwiw, a wide variety of CPU memory
barriers (around GGTT flushing, fence updates, PTE updates) and GPU
flushes/invalidates (between requests, after PTE updates) were tried as
part of the investigation to find an alternate cause, nothing comes
close to serialised GGTT updates.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105591
Testcase: igt/gem_concurrent_blit
Testcase: igt/gem_mmap_gtt/*forked*
References: 5bab6f60cb4d ("drm/i915: Serialise updates to GGTT with access through GGTT on Braswell")
References: 4509276ee824 ("drm/i915: Remove Braswell GGTT update w/a")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114211729.30352-1-chris@chris-wilson.co.uk

drm/i915: Differentiate between ggtt->mutex and ppgtt->mutex

We have two classes of VM, global GTT and per-process GTT. In order to
allow ourselves the freedom to mix both along call chains, distinguish
the two classes with regards to their mutex and lockdep maps.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114215956.32266-1-chris@chris-wilson.co.uk

drm/i915: Fix ILK-IVB primary plane enable delays

Primary and sprite plane enable on ILK-IVB may take two frames to complete

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103925
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1545305168-6047-1-git-send-email-juhapekka.heikkila@gmail.com

drm/vblank: Allow dynamic per-crtc max_vblank_count

On i965gm we need to adjust max_vblank_count dynamically
depending on whether the TV encoder is used or not. To
that end add a per-crtc max_vblank_count that takes
precedence over its device wide counterpart. The driver
can now call drm_crtc_set_max_vblank_count() to configure
the per-crtc value before calling drm_vblank_on().

Also looks like there was some discussion about exynos needing
similar treatment.

v2: Drop the extra max_vblank_count!=0 check for the
    WARN(last!=current), will take care of it in i915 code (Daniel)
    WARN_ON(!inmodeset) (Daniel)
    WARN_ON(dev->max_vblank_count)
    Pimp up the docs (Daniel)

Cc: stable@vger.kernel.org
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181127182004.28885-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Mark up Ironlake ips with rpm wakerefs

Currently Ironlake operates under the assumption that rpm awake (and its
error checking is disabled). As such, we have missed a few places where we
access registers without taking the rpm wakeref and thus trigger
warnings. intel_ips being one culprit.

As this involved adding a potentially sleeping rpm_get, we have to
rearrange the spinlocks slightly and so switch to acquiring a device-ref
under the spinlock rather than hold the spinlock for the whole
operation. To be consistent, we make the change in pattern common to the
intel_ips interface even though this adds a few more atomic operations
than necessary in a few cases.

v2: Sagar noted the mb around setting mch_dev were overkill as we only
need ordering there, and that i915_emon_status was still using
struct_mutex for no reason, but lacked rpm.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-21-chris@chris-wilson.co.uk

drm/i915: Combined gt.awake/gt.power wakerefs

As the GT_IRQ power domain implies a wakeref, we can use it inplace of
our existing redundant rpm grab.

v2: Drop papering over forgetting to take the runtime wakeref in
selftests

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-20-chris@chris-wilson.co.uk

drm/i915: Complain if hsw_get_pipe_config acquires the same power well twice

As we only release each power well once, we assume that each transcoder
maps to a different domain. Complain if this is not so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-19-chris@chris-wilson.co.uk

drm/i915/dp: Markup pps lock power well

Track where and when we acquire and release the power well for pps
access along the dp aux link, with a view to detecting if we leak any
wakerefs.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-18-chris@chris-wilson.co.uk

drm/i915: Track the wakeref used to initialise display power domains

On module load and unload, we grab the POWER_DOMAIN_INIT powerwells and
transfer them to the runtime-pm code. We can use our wakeref tracking to
verify that the wakeref is indeed passed from init to enable, and
disable to fini; and across suspend.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-17-chris@chris-wilson.co.uk

drm/i915: Markup paired operations on display power domains

The majority of runtime-pm operations are bounded and scoped within a
function; these are easy to verify that the wakeref are handled
correctly. We can employ the compiler to help us, and reduce the number
of wakerefs tracked when debugging, by passing around cookies provided
by the various rpm_get functions to their rpm_put counterpart. This
makes the pairing explicit, and given the required wakeref cookie the
compiler can verify that we pass an initialised value to the rpm_put
(quite handy for double checking error paths).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-16-chris@chris-wilson.co.uk

drm/i915: Syntatic sugar for using intel_runtime_pm

Frequently, we use intel_runtime_pm_get/_put around a small block.
Formalise that usage by providing a macro to define such a block with an
automatic closure to scope the intel_runtime_pm wakeref to that block,
i.e. macro abuse smelling of python.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-15-chris@chris-wilson.co.uk

drm/i915/selftests: Mark up rpm wakerefs

Track the temporary wakerefs used within the selftests so that leaks are
clear.

v2: Add a couple of coarse annotations for mock selftests as we now
loudly warn about the errors.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-14-chris@chris-wilson.co.uk

drm/i915/panel: Track temporary rpm wakeref

Keep track of the temporary rpm wakeref used for panel backlight access,
so that we can cancel it immediately upon release and so more clearly
identify leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-13-chris@chris-wilson.co.uk

drm/i915/hotplug: Track temporary rpm wakeref

Keep track of the temporary rpm wakeref inside hotplug detection, so
that we can cancel it immediately upon release and so clearly identify
leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-12-chris@chris-wilson.co.uk

drm/i915/fb: Track rpm wakerefs

Keep track of the rpm wakeref used for framebuffer access so that we can
cancel upon release and so more clearly identify leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-11-chris@chris-wilson.co.uk

drm/i915/gem: Track the rpm wakerefs

Keep track of the temporary rpm wakerefs used for user access to the
device, so that we can cancel them upon release and clearly identify any
leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-10-chris@chris-wilson.co.uk

drm/i915/guc: Track the rpm wakeref

Keep track of our acquired wakeref for interacting with the guc, so that
we can cancel it upon release and so clearly identify leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-9-chris@chris-wilson.co.uk

drm/i915/pmu: Track rpm wakeref

Track the wakeref used for temporary access to the device, and discard
it upon release so that leaks can be identified.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-8-chris@chris-wilson.co.uk

drm/i915/perf: Track the rpm wakeref

Keep track of our wakeref used to keep the device awake so we can catch
any leak.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-7-chris@chris-wilson.co.uk

drm/i915: Mark up debugfs with rpm wakeref tracking

As debugfs has a simple pattern of taking a rpm wakeref around the user
access, we can track the local reference and drop it as soon as
possible.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-6-chris@chris-wilson.co.uk

drm/i915: Mark up sysfs with rpm wakeref tracking

As sysfs has a simple pattern of taking a rpm wakeref around the user
access, we can track the local reference and drop it as soon as
possible.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-5-chris@chris-wilson.co.uk

drm/i915: Track the rpm wakerefs for error handling

Keep hold of the local wakeref used in error handling, to cancel
the tracking upon release so that leaks can be identified.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-4-chris@chris-wilson.co.uk

drm/i915: Track GT wakeref

Record the wakeref used for keeping the device awake as the GPU is
executing requests and be sure to cancel the tracking upon parking.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-3-chris@chris-wilson.co.uk

drm/i915: Markup paired operations on wakerefs

The majority of runtime-pm operations are bounded and scoped within a
function; these are easy to verify that the wakeref are handled
correctly. We can employ the compiler to help us, and reduce the number
of wakerefs tracked when debugging, by passing around cookies provided
by the various rpm_get functions to their rpm_put counterpart. This
makes the pairing explicit, and given the required wakeref cookie the
compiler can verify that we pass an initialised value to the rpm_put
(quite handy for double checking error paths).

For regular builds, the compiler should be able to eliminate the unused
local variables and the program growth should be minimal. Fwiw, it came
out as a net improvement as gcc was able to refactor rpm_get and
rpm_get_if_in_use together,

v2: Just s/rpm_put/rpm_put_unchecked/ everywhere, leaving the manual
mark up for smaller more targeted patches.
v3: Mention the cookie in Returns

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-2-chris@chris-wilson.co.uk

drm/i915: Track all held rpm wakerefs

Everytime we take a wakeref, record the stack trace of where it was
taken; clearing the set if we ever drop back to no owners. For debugging
a rpm leak, we can look at all the current wakerefs and check if they
have a matching rpm_put.

v2: Use skip=0 for unwinding the stack as it appears our noinline
function doesn't appear on the stack (nor does save_stack_trace itself!)
v3: Allow rpm->debug_count to disappear between inspections and so
avoid calling krealloc(0) as that may return a ZERO_PTR not NULL! (Mika)
v4: Show who last acquire/released the runtime pm

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-1-chris@chris-wilson.co.uk

drm/meson: remove firmware framebuffers

In case we are using simplefb or another conflicting framebuffer, make
the call to drm_fb_helper_remove_conflicting_framebuffers()

Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181210092853.13050-1-mjourdan@baylibre.com

drm/mxsfb: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-3-noralf@tronnes.org

drm/hisilicon/kirin: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

struct kirin_drm_private can be removed now that driver doesn't have to
store the fbdev pointer.

Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-2-noralf@tronnes.org

drm: move EXPORT_SYMBOL_FOR_TESTS_ONLY to drm_util.h

In the quest to get rid of drmP.h move the newly
added EXPORT_SYMBOL_FOR_TESTS_ONLY to drm_util.h.
Fix the single user.

Add a note to drmP.h to avoid further use of it.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190112193251.20450-3-sam@ravnborg.org

drm: move drm_can_sleep() to drm_util.h

Move drm_can_sleep() out of drmP.h to allow users
to get rid of the drmP.h include.

There was no header file that was a good match for this helper function.
So add this to drm_util with the relevant includes.

Add include of drm_util.h to all users.

v2:
- Update comments to use kernel-doc style (Daniel)
- Add FIXME to drm_can_sleep and add note that this
  function should not be used in new code (Daniel)

v3:
- Fix kernel-doc syntax (Daniel)
- Plug drm_util.h into drm-internels.rst (Daniel)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190112193251.20450-2-sam@ravnborg.org

drm/cirrus: fix connector leak at unload

This fixes an '*ERROR* connector VGA-2 leaked!' splat at driver unload.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190111140242.29002-1-robdclark@gmail.com
[ kraxel: adapt to commit "c2d88e06bc drm: Move the legacy kms
          disable_all helper to crtc helpers" ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/bochs: move remaining fb bits to kms

bochs_fbdev.c is almost empty now.  Move the remaining framebuffer bits
over to bochs_kms.c.  Pure code motion. No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190111053752.4004-17-kraxel@redhat.com