OSDN Git Service
Eric Paris [Fri, 6 Jul 2012 18:13:30 +0000 (14:13 -0400)]
SELinux: do not check open perms if they are not known to policy
When I introduced open perms policy didn't understand them and I
implemented them as a policycap. When I added the checking of open perm
to truncate I forgot to conditionalize it on the userspace defined
policy capability. Running an old policy with a new kernel will not
check open on open(2) but will check it on truncate. Conditionalize the
truncate check the same as the open check.
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org # 3.4.x
Signed-off-by: James Morris <james.l.morris@oracle.com>
Eric Paris [Fri, 6 Jul 2012 18:13:29 +0000 (14:13 -0400)]
SELinux: include definition of new capabilities
The kernel has added CAP_WAKE_ALARM and CAP_EPOLLWAKEUP. We need to
define these in SELinux so they can be mediated by policy.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Linus Torvalds [Wed, 11 Jul 2012 23:17:14 +0000 (16:17 -0700)]
Merge tag 'fbdev-fixes-for-3.5-2' of git://github.com/schandinat/linux-2.6
Pull fbdev fixes from Florian Tobias Schandinat:
"Two fixes for OMAPDSS by Tomi Valkeinen:
- one to avoid warnings when runtime PM is not enabled
- one workaround to dependancy issues during suspend/resume"
* tag 'fbdev-fixes-for-3.5-2' of git://github.com/schandinat/linux-2.6:
OMAPDSS: fix warnings if CONFIG_PM_RUNTIME=n
OMAPDSS: Use PM notifiers for system suspend
Linus Torvalds [Wed, 11 Jul 2012 23:06:54 +0000 (16:06 -0700)]
Merge branch 'akpm' (Andrew's patch-bomb)
Merge random patches from Andrew Morton.
* Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (32 commits)
memblock: free allocated memblock_reserved_regions later
mm: sparse: fix usemap allocation above node descriptor section
mm: sparse: fix section usemap placement calculation
xtensa: fix incorrect memset
shmem: cleanup shmem_add_to_page_cache
shmem: fix negative rss in memcg memory.stat
tmpfs: revert SEEK_DATA and SEEK_HOLE
drivers/rtc/rtc-twl.c: fix threaded IRQ to use IRQF_ONESHOT
fat: fix non-atomic NFS i_pos read
MAINTAINERS: add OMAP CPUfreq driver to OMAP Power Management section
sgi-xp: nested calls to spin_lock_irqsave()
fs: ramfs: file-nommu: add SetPageUptodate()
drivers/rtc/rtc-mxc.c: fix irq enabled interrupts warning
mm/memory_hotplug.c: release memory resources if hotadd_new_pgdat() fails
h8300/uaccess: add mising __clear_user()
h8300/uaccess: remove assignment to __gu_val in unhandled case of get_user()
h8300/time: add missing #include <asm/irq_regs.h>
h8300/signal: fix typo "statis"
h8300/pgtable: add missing #include <asm-generic/pgtable.h>
drivers/rtc/rtc-ab8500.c: ensure correct probing of the AB8500 RTC when Device Tree is enabled
...
Yinghai Lu [Wed, 11 Jul 2012 21:02:56 +0000 (14:02 -0700)]
memblock: free allocated memblock_reserved_regions later
memblock_free_reserved_regions() calls memblock_free(), but
memblock_free() would double reserved.regions too, so we could free the
old range for reserved.regions.
Also tj said there is another bug which could be related to this.
| I don't think we're saving any noticeable
| amount by doing this "free - give it to page allocator - reserve
| again" dancing. We should just allocate regions aligned to page
| boundaries and free them later when memblock is no longer in use.
in that case, when DEBUG_PAGEALLOC, will get panic:
memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39
BUG: unable to handle kernel paging request at
ffff88102febd948
IP: [<
ffffffff836a5774>] __next_free_mem_range+0x9b/0x155
PGD
4826063 PUD
cf67a067 PMD
cf7fa067 PTE
800000102febd160
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
CPU 0
Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-
20120614-sasha #447
RIP: 0010:[<
ffffffff836a5774>] [<
ffffffff836a5774>] __next_free_mem_range+0x9b/0x155
See the discussion at https://lkml.org/lkml/2012/6/13/469
So try to allocate with PAGE_SIZE alignment and free it later.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yinghai Lu [Wed, 11 Jul 2012 21:02:53 +0000 (14:02 -0700)]
mm: sparse: fix usemap allocation above node descriptor section
After commit
f5bf18fa22f8 ("bootmem/sparsemem: remove limit constraint
in alloc_bootmem_section"), usemap allocations may easily be placed
outside the optimal section that holds the node descriptor, even if
there is space available in that section. This results in unnecessary
hotplug dependencies that need to have the node unplugged before the
section holding the usemap.
The reason is that the bootmem allocator doesn't guarantee a linear
search starting from the passed allocation goal but may start out at a
much higher address absent an upper limit.
Fix this by trying the allocation with the limit at the section end,
then retry without if that fails. This keeps the fix from
f5bf18fa22f8
of not panicking if the allocation does not fit in the section, but
still makes sure to try to stay within the section at first.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [3.3.x, 3.4.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yinghai Lu [Wed, 11 Jul 2012 21:02:51 +0000 (14:02 -0700)]
mm: sparse: fix section usemap placement calculation
Commit
238305bb4d41 ("mm: remove sparsemem allocation details from the
bootmem allocator") introduced a bug in the allocation goal calculation
that put section usemaps not in the same section as the node
descriptors, creating unnecessary hotplug dependencies between them:
node 0 must be removed before remove section 16399
node 1 must be removed before remove section 16399
node 2 must be removed before remove section 16399
node 3 must be removed before remove section 16399
node 4 must be removed before remove section 16399
node 5 must be removed before remove section 16399
node 6 must be removed before remove section 16399
The reason is that it applies PAGE_SECTION_MASK to the physical address
of the node descriptor when finding a suitable place to put the usemap,
when this mask is actually intended to be used with PFNs. Because the
PFN mask is wider, the target address will point beyond the wanted
section holding the node descriptor and the node must be offlined before
the section holding the usemap can go.
Fix this by extending the mask to address width before use.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Wed, 11 Jul 2012 21:02:50 +0000 (14:02 -0700)]
xtensa: fix incorrect memset
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=43871
Reported-by: <dcb314@hotmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 11 Jul 2012 21:02:48 +0000 (14:02 -0700)]
shmem: cleanup shmem_add_to_page_cache
shmem_add_to_page_cache() has three callsites, but only one of them wants
the radix_tree_preload() (an exceptional entry guarantees that the radix
tree node is present in the other cases), and only that site can achieve
mem_cgroup_uncharge_cache_page() (PageSwapCache makes it a no-op in the
other cases). We did it this way originally to reflect
add_to_page_cache_locked(); but it's confusing now, so move the radix_tree
preloading and mem_cgroup uncharging to that one caller.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 11 Jul 2012 21:02:47 +0000 (14:02 -0700)]
shmem: fix negative rss in memcg memory.stat
When adding the page_private checks before calling shmem_replace_page(), I
did realize that there is a further race, but thought it too unlikely to
need a hurried fix.
But independently I've been chasing why a mem cgroup's memory.stat
sometimes shows negative rss after all tasks have gone: I expected it to
be a stats gathering bug, but actually it's shmem swapping's fault.
It's an old surprise, that when you lock_page(lookup_swap_cache(swap)),
the page may have been removed from swapcache before getting the lock; or
it may have been freed and reused and be back in swapcache; and it can
even be using the same swap location as before (page_private same).
The swapoff case is already secure against this (swap cannot be reused
until the whole area has been swapped off, and a new swapped on); and
shmem_getpage_gfp() is protected by shmem_add_to_page_cache()'s check for
the expected radix_tree entry - but a little too late.
By that time, we might have already decided to shmem_replace_page(): I
don't know of a problem from that, but I'd feel more at ease not to do so
spuriously. And we have already done mem_cgroup_cache_charge(), on
perhaps the wrong mem cgroup: and this charge is not then undone on the
error path, because PageSwapCache ends up preventing that.
It's this last case which causes the occasional negative rss in
memory.stat: the page is charged here as cache, but (sometimes) found to
be anon when eventually it's uncharged - and in between, it's an
undeserved charge on the wrong memcg.
Fix this by adding an earlier check on the radix_tree entry: it's
inelegant to descend the tree twice, but swapping is not the fast path,
and a better solution would need a pair (try+commit) of memcg calls, and a
rework of shmem_replace_page() to keep out of the swapcache.
We can use the added shmem_confirm_swap() function to replace the
find_get_page+page_cache_release we were already doing on the error path.
And add a comment on that -EEXIST: it seems a peculiar errno to be using,
but originates from its use in radix_tree_insert().
[It can be surprising to see positive rss left in a memcg's memory.stat
after all tasks have gone, since it is supposed to count anonymous but not
shmem. Aside from sharing anon pages via fork with a task in some other
memcg, it often happens after swapping: because a swap page can't be freed
while under writeback, nor while locked. So it's not an error, and these
residual pages are easily freed once pressure demands.]
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 11 Jul 2012 21:02:45 +0000 (14:02 -0700)]
tmpfs: revert SEEK_DATA and SEEK_HOLE
Revert
4fb5ef089b28 ("tmpfs: support SEEK_DATA and SEEK_HOLE"). I believe
it's correct, and it's been nice to have from rc1 to rc6; but as the
original commit said:
I don't know who actually uses SEEK_DATA or SEEK_HOLE, and whether it
would be of any use to them on tmpfs. This code adds 92 lines and 752
bytes on x86_64 - is that bloat or worthwhile?
Nobody asked for it, so I conclude that it's bloat: let's revert tmpfs to
the dumb generic support for v3.5. We can always reinstate it later if
useful, and anyone needing it in a hurry can just get it out of git.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Josef Bacik <josef@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Jeff liu <jeff.liu@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kevin Hilman [Wed, 11 Jul 2012 21:02:44 +0000 (14:02 -0700)]
drivers/rtc/rtc-twl.c: fix threaded IRQ to use IRQF_ONESHOT
Requesting a threaded interrupt without a primary handler and without
IRQF_ONESHOT is dangerous, and after commit
1c6c6952 ("genirq: Reject
bogus threaded irq requests"), these requests are rejected. This causes
->probe() to fail, and the RTC driver not to be availble.
To fix, add IRQF_ONESHOT to the IRQ flags.
Tested on OMAP3730/OveroSTORM and OMAP4430/Panda board using rtcwake to
wake from system suspend multiple times.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven J. Magnani [Wed, 11 Jul 2012 21:02:42 +0000 (14:02 -0700)]
fat: fix non-atomic NFS i_pos read
fat_encode_fh() can fetch an invalid i_pos value on systems where 64-bit
accesses are not atomic. Make it use the same accessor as the rest of the
FAT code.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kevin Hilman [Wed, 11 Jul 2012 21:02:40 +0000 (14:02 -0700)]
MAINTAINERS: add OMAP CPUfreq driver to OMAP Power Management section
Add the OMAP CPUFreq driver to the list of files in the OMAP Power
Management section.
I've already been maintaining this driver, this just makes it official.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Wed, 11 Jul 2012 21:02:38 +0000 (14:02 -0700)]
sgi-xp: nested calls to spin_lock_irqsave()
The code here has a nested spin_lock_irqsave(). It's not needed since
IRQs are already disabled and it causes a problem because it means that
IRQs won't be enabled again at the end. The second call to
spin_lock_irqsave() will overwrite the value of irq_flags and we can't
restore the proper settings.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bob Liu [Wed, 11 Jul 2012 21:02:35 +0000 (14:02 -0700)]
fs: ramfs: file-nommu: add SetPageUptodate()
There is a bug in the below scenario for !CONFIG_MMU:
1. create a new file
2. mmap the file and write to it
3. read the file can't get the correct value
Because
sys_read() -> generic_file_aio_read() -> simple_readpage() -> clear_page()
which causes the page to be zeroed.
Add SetPageUptodate() to ramfs_nommu_expand_for_mapping() so that
generic_file_aio_read() do not call simple_readpage().
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Benoît Thébaudeau [Wed, 11 Jul 2012 21:02:32 +0000 (14:02 -0700)]
drivers/rtc/rtc-mxc.c: fix irq enabled interrupts warning
Fixes
WARNING: at irq/handle.c:146 handle_irq_event_percpu+0x19c/0x1b8()
irq 25 handler mxc_rtc_interrupt+0x0/0xac enabled interrupts
Modules linked in:
(unwind_backtrace+0x0/0xf0) from (warn_slowpath_common+0x4c/0x64)
(warn_slowpath_common+0x4c/0x64) from (warn_slowpath_fmt+0x30/0x40)
(warn_slowpath_fmt+0x30/0x40) from (handle_irq_event_percpu+0x19c/0x1b8)
(handle_irq_event_percpu+0x19c/0x1b8) from (handle_irq_event+0x28/0x38)
(handle_irq_event+0x28/0x38) from (handle_level_irq+0x80/0xc4)
(handle_level_irq+0x80/0xc4) from (generic_handle_irq+0x24/0x38)
(generic_handle_irq+0x24/0x38) from (handle_IRQ+0x30/0x84)
(handle_IRQ+0x30/0x84) from (avic_handle_irq+0x2c/0x4c)
(avic_handle_irq+0x2c/0x4c) from (__irq_svc+0x40/0x60)
Exception stack(0xc050bf60 to 0xc050bfa8)
bf60:
00000001 00000000 003c4208 c0018e20 c050a000 c050a000 c054a4c8 c050a000
bf80:
c05157a8 4117b363 80503bb4 00000000 01000000 c050bfa8 c0018e2c c000e808
bfa0:
60000013 ffffffff
(__irq_svc+0x40/0x60) from (default_idle+0x1c/0x30)
(default_idle+0x1c/0x30) from (cpu_idle+0x68/0xa8)
(cpu_idle+0x68/0xa8) from (start_kernel+0x22c/0x26c)
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sascha Hauer <kernel@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wen Congyang [Wed, 11 Jul 2012 21:02:31 +0000 (14:02 -0700)]
mm/memory_hotplug.c: release memory resources if hotadd_new_pgdat() fails
We should goto error to release memory resource if hotadd_new_pgdat()
failed.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 11 Jul 2012 21:02:28 +0000 (14:02 -0700)]
h8300/uaccess: add mising __clear_user()
Fix the build error:
include/linux/regset.h: In function 'user_regset_copyout_zero':
include/linux/regset.h:289:3: error: implicit declaration of function '__clear_user' [-Werror=implicit-function-declaration]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 11 Jul 2012 21:02:26 +0000 (14:02 -0700)]
h8300/uaccess: remove assignment to __gu_val in unhandled case of get_user()
__gu_val is const if the passed ptr is const, giving:
include/linux/pagemap.h: In function 'fault_in_pages_readable':
include/linux/pagemap.h:442:2: error: assignment of read-only variable '__gu_val'
include/linux/pagemap.h:448:4: error: assignment of read-only variable '__gu_val'
include/linux/pagemap.h: In function 'fault_in_multipages_readable':
include/linux/pagemap.h:499:3: error: assignment of read-only variable '__gu_val'
include/linux/pagemap.h:508:3: error: assignment of read-only variable '__gu_val'
make[4]: *** [init/main.o] Error 1
As we don't care about the actual value of __gu_val in the unhandled
case (it will cause a link error anyway), just remove the assignment.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 11 Jul 2012 21:02:23 +0000 (14:02 -0700)]
h8300/time: add missing #include <asm/irq_regs.h>
Fix the build error:
arch/h8300/kernel/time.c: In function 'h8300_timer_tick':
arch/h8300/kernel/time.c:39:2: error: implicit declaration of function 'get_irq_regs' [-Werror=implicit-function-declaration]
arch/h8300/kernel/time.c:39:42: error: invalid type argument of '->' (have 'int')
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 11 Jul 2012 21:02:22 +0000 (14:02 -0700)]
h8300/signal: fix typo "statis"
The keyword is "static", not "statis":
arch/h8300/kernel/signal.c:455:8: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void'
arch/h8300/kernel/signal.c: In function 'do_notify_resume':
arch/h8300/kernel/signal.c:511:3: error: implicit declaration of function 'do_signal' [-Werror=implicit-function-declaration]
arch/h8300/kernel/signal.c: At top level:
arch/h8300/kernel/signal.c:414:1: warning: 'handle_signal' defined but not used [-Wunused-function]
Introduced in commit
7ae4e32a6514 ("h8300: switch to saved_sigmask-based
sigsuspend/rt_sigsuspend")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 11 Jul 2012 21:02:19 +0000 (14:02 -0700)]
h8300/pgtable: add missing #include <asm-generic/pgtable.h>
Fix the h8300 build error:
kernel/sched/core.c: In function 'context_switch':
kernel/sched/core.c:2061:2: error: implicit declaration of function 'arch_start_context_switch' [-Werror=implicit-function-declaration]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lee Jones [Wed, 11 Jul 2012 21:02:17 +0000 (14:02 -0700)]
drivers/rtc/rtc-ab8500.c: ensure correct probing of the AB8500 RTC when Device Tree is enabled
Without this patch, if Device Tree is enabled the AB8500 RTC wouldn't get
probed at all, as there is no reference to it from platform code. This
patch ensures the driver is probed during normal DT start-up.
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lee Jones [Wed, 11 Jul 2012 21:02:16 +0000 (14:02 -0700)]
drivers/rtc/rtc-ab8500.c: use IRQF_ONESHOT when requesting a threaded IRQ
This driver's IRQ registration is failing because the kernel now forces
IRQs to be ONESHOT if no IRQ handler is passed.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Wed, 11 Jul 2012 21:02:13 +0000 (14:02 -0700)]
mm, thp: abort compaction if migration page cannot be charged to memcg
If page migration cannot charge the temporary page to the memcg,
migrate_pages() will return -ENOMEM. This isn't considered in memory
compaction however, and the loop continues to iterate over all
pageblocks trying to isolate and migrate pages. If a small number of
very large memcgs happen to be oom, however, these attempts will mostly
be futile leading to an enormous amout of cpu consumption due to the
page migration failures.
This patch will short circuit and fail memory compaction if
migrate_pages() returns -ENOMEM. COMPACT_PARTIAL is returned in case
some migrations were successful so that the page allocator will retry.
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konstantin Khlebnikov [Wed, 11 Jul 2012 21:02:11 +0000 (14:02 -0700)]
c/r: prctl: less paranoid prctl_set_mm_exe_file()
"no other files mapped" requirement from my previous patch (c/r: prctl:
update prctl_set_mm_exe_file() after mm->num_exe_file_vmas removal) is too
paranoid, it forbids operation even if there mapped one shared-anon vma.
Let's check that current mm->exe_file already unmapped, in this case
exe_file symlink already outdated and its changing is reasonable.
Plus, this patch fixes exit code in case operation success.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Reported-by: Cyrill Gorcunov <gorcunov@openvz.org>
Tested-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luis Henriques [Wed, 11 Jul 2012 21:02:10 +0000 (14:02 -0700)]
ocfs2: fix NULL pointer dereference in __ocfs2_change_file_space()
As ocfs2_fallocate() will invoke __ocfs2_change_file_space() with a NULL
as the first parameter (file), it may trigger a NULL pointer dereferrence
due to a missing check.
Addresses http://bugs.launchpad.net/bugs/
1006012
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Reported-by: Bret Towe <magnade@gmail.com>
Tested-by: Bret Towe <magnade@gmail.com>
Cc: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 11 Jul 2012 21:02:07 +0000 (14:02 -0700)]
mn10300: use "#elif defined(CONFIG_*)" instead of "#elif CONFIG_*"
Fix the warnings:
arch/mn10300/kernel/irq.c:173:7: warning: "CONFIG_MN10300_TTYSM1_TIMER9" is not defined [-Wundef]
arch/mn10300/kernel/irq.c:175:7: warning: "CONFIG_MN10300_TTYSM1_TIMER3" is not defined [-Wundef]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 11 Jul 2012 21:02:04 +0000 (14:02 -0700)]
mn10300: mm/dma-alloc.c needs <linux/export.h>
Fix the warnings:
arch/mn10300/mm/dma-alloc.c: At top level:
arch/mn10300/mm/dma-alloc.c:63:1: warning: data definition has no type or storage class [enabled by default]
arch/mn10300/mm/dma-alloc.c:63:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
arch/mn10300/mm/dma-alloc.c:63:1: warning: parameter names (without types) in function declaration [enabled by default]
arch/mn10300/mm/dma-alloc.c:75:1: warning: data definition has no type or storage class [enabled by default]
arch/mn10300/mm/dma-alloc.c:75:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
arch/mn10300/mm/dma-alloc.c:75:1: warning: parameter names (without types) in function declaration [enabled by default]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 11 Jul 2012 21:02:02 +0000 (14:02 -0700)]
mn10300: kernel/traps.c needs <linux/export.h>
Fix the warning:
arch/mn10300/kernel/traps.c:304:1: warning: data definition has no type or storage class [enabled by default]
arch/mn10300/kernel/traps.c:304:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
arch/mn10300/kernel/traps.c:304:1: warning: parameter names (without types) in function declaration [enabled by default]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 11 Jul 2012 21:02:00 +0000 (14:02 -0700)]
mn10300: kernel/internal.h needs <linux/irqreturn.h>
Fix the nm10300 build failure:
In file included from arch/mn10300/kernel/csrc-mn10300.c:14:0:
arch/mn10300/kernel/internal.h:42:1: error: unknown type name 'irqreturn_t'
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 11 Jul 2012 21:01:59 +0000 (14:01 -0700)]
mn10300: remove duplicate definition of PTRACE_O_TRACESYSGOOD
Fix the warning:
include/linux/ptrace.h:66:0: warning: "PTRACE_O_TRACESYSGOOD" redefined [enabled by default]
arch/mn10300/include/asm/ptrace.h:85:0: note: this is the location of the previous definition
We already have it in <linux/ptrace.h>, so remove it from <asm/ptrace.h>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Wed, 11 Jul 2012 21:01:56 +0000 (14:01 -0700)]
mn10300: move setup_jiffies_interrupt() to cevt-mn10300.c
Move the static inline function setup_jiffies_interrupt() from
<asm/timex.h> to arch/mn10300/kernel/cevt-mn10300.c, which is its only
callsite.
This allows to remove the inclusion of <asm/hardirq.h> and <linux/irq.h>
from <asm/timex.h> and <unit/timex.h>, fixing include hell like:
include/linux/jiffies.h:260:31: warning: "CLOCK_TICK_RATE" is not defined [-Wundef]
include/linux/jiffies.h:260:31: warning: "CLOCK_TICK_RATE" is not defined [-Wundef]
include/linux/jiffies.h:46:42: error: division by zero in #if
...
make[4]: *** [arch/mn10300/kernel/asm-offsets.s] Error 1
and (after a quick hack for the above by defining CLOCK_TICK_RATE in
<linux/jiffies.h>):
In file included from include/linux/notifier.h:15:0,
from include/linux/memory_hotplug.h:6,
from include/linux/mmzone.h:718,
from include/linux/gfp.h:4,
from include/linux/irq.h:20,
from arch/mn10300/unit-asb2303/include/unit/timex.h:15,
from arch/mn10300/include/asm/timex.h:15,
from include/linux/timex.h:174,
from include/linux/jiffies.h:8,
from include/linux/ktime.h:25,
from include/linux/timer.h:5,
from include/linux/workqueue.h:8,
include/linux/srcu.h:55:22: error: field 'work' has incomplete type
As a consequence, we do need a few more inclusions of <asm/irq.h>, namely
in arch/mn10300/unit-asb2303/smc91111.c and
arch/mn10300/unit-asb2305/unit-init.c.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Devendra Naga [Wed, 11 Jul 2012 21:01:53 +0000 (14:01 -0700)]
drivers/rtc/rtc-spear.c: fix use-after-free in spear_rtc_remove()
`config' is freed and is then used in the rtc_device_unregister() call,
causing a kernel panic.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Reviewed-by: Viresh Kumar <viresh.linux@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiang Liu [Wed, 11 Jul 2012 21:01:52 +0000 (14:01 -0700)]
memory hotplug: fix invalid memory access caused by stale kswapd pointer
kswapd_stop() is called to destroy the kswapd work thread when all memory
of a NUMA node has been offlined. But kswapd_stop() only terminates the
work thread without resetting NODE_DATA(nid)->kswapd to NULL. The stale
pointer will prevent kswapd_run() from creating a new work thread when
adding memory to the memory-less NUMA node again. Eventually the stale
pointer may cause invalid memory access.
An example stack dump as below. It's reproduced with 2.6.32, but latest
kernel has the same issue.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<
ffffffff81051a94>] exit_creds+0x12/0x78
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/memory/memory391/state
CPU 11
Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq microcode fuse loop dm_mod tpm_tis rtc_cmos i2c_i801 rtc_core tpm serio_raw pcspkr sg tpm_bios igb i2c_core iTCO_wdt rtc_lib mptctl iTCO_vendor_support button dca bnx2 usbhid hid uhci_hcd ehci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic ide_core ata_generic ata_piix libata thermal processor thermal_sys hwmon mptsas mptscsih mptbase scsi_transport_sas scsi_mod
Pid: 7949, comm: sh Not tainted 2.6.32.12-qiuxishi-5-default #92 Tecal RH2285
RIP: 0010:exit_creds+0x12/0x78
RSP: 0018:
ffff8806044f1d78 EFLAGS:
00010202
RAX:
0000000000000000 RBX:
ffff880604f22140 RCX:
0000000000019502
RDX:
0000000000000000 RSI:
0000000000000202 RDI:
0000000000000000
RBP:
ffff880604f22150 R08:
0000000000000000 R09:
ffffffff81a4dc10
R10:
00000000000032a0 R11:
ffff880006202500 R12:
0000000000000000
R13:
0000000000c40000 R14:
0000000000008000 R15:
0000000000000001
FS:
00007fbc03d066f0(0000) GS:
ffff8800282e0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
0000000000000000 CR3:
000000060f029000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Process sh (pid: 7949, threadinfo
ffff8806044f0000, task
ffff880603d7c600)
Stack:
ffff880604f22140 ffffffff8103aac5 ffff880604f22140 ffffffff8104d21e
ffff880006202500 0000000000008000 0000000000c38000 ffffffff810bd5b1
0000000000000000 ffff880603d7c600 00000000ffffdd29 0000000000000003
Call Trace:
__put_task_struct+0x5d/0x97
kthread_stop+0x50/0x58
offline_pages+0x324/0x3da
memory_block_change_state+0x179/0x1db
store_mem_state+0x9e/0xbb
sysfs_write_file+0xd0/0x107
vfs_write+0xad/0x169
sys_write+0x45/0x6e
system_call_fastpath+0x16/0x1b
Code: ff 4d 00 0f 94 c0 84 c0 74 08 48 89 ef e8 1f fd ff ff 5b 5d 31 c0 41 5c c3 53 48 8b 87 20 06 00 00 48 89 fb 48 8b bf 18 06 00 00 <8b> 00 48 c7 83 18 06 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0
RIP exit_creds+0x12/0x78
RSP <
ffff8806044f1d78>
CR2:
0000000000000000
[akpm@linux-foundation.org: add pglist_data.kswapd locking comments]
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 11 Jul 2012 20:01:57 +0000 (13:01 -0700)]
Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile fix from Chris Metcalf:
"This is a single change to fix backtracing in big-endian mode."
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
arch/tile: big-endian: properly bswap instruction bundles when backtracing
Linus Torvalds [Wed, 11 Jul 2012 19:51:58 +0000 (12:51 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of three fixes for data corruption (libsas task file),
oops causing (NULL in scsi_cmd_to_driver) and driver failure (bnx2i).
The oops caused by the NULL in scsi_cmd_to_driver() manifests in
scsi_eh_send_cmd() and has been seen by several people now.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] bnx2i: Removed the reference to the netdev->base_addr
[SCSI] libsas: fix taskfile corruption in sas_ata_qc_fill_rtf
[SCSI] Fix NULL dereferences in scsi_cmd_to_driver
Javier Martin [Wed, 11 Jul 2012 15:34:54 +0000 (17:34 +0200)]
media: mx2_camera: Fix mbus format handling
Do not use MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags. The driver
must negotiate with the attached sensor whether the mbus format is UYUV or
YUYV and set CSICR1 configuration accordingly.
This is needed for the video function on mach-imx27_visstrim_m10.c to
perform properly, since an earlier version of this patch has been proven
wrong and has been reverted and a commit, depending on it: "[media]
i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16" is in the mainline.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[ g.liakhovetski@gmx.de: move a macro definition to a more logical place ]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
[ Applying directly because Mauro is on vacation - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 11 Jul 2012 19:44:25 +0000 (12:44 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
- multiple omap2+ bug fixes
- a regression on ux500 dt support
- a build failure on shmobile
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable it
ARM: shmobile: fix platsmp.c build when ARCH_SH73A0=n
ARM: ux500: Over-ride the DT device naming scheme for pinctrl
ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set
of: address: Don't fail a lookup just because a node has no reg property
ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer
Linus Torvalds [Wed, 11 Jul 2012 19:42:39 +0000 (12:42 -0700)]
Merge tag 'pm-for-3.5-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This removes ACPICA code that had already been removed once from the
kernel already by commit
2780cc4660e1 ("[ACPI] Fix suspend/resume
lockup issue by leaving Bus Master Arbitration enabled"), because it
was known to cause systems to lock up during resume from suspend, but
was re-introduced by mistake during the v3.4 merge window."
* tag 'pm-for-3.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PM: Leave Bus Master Arbitration enabled for suspend/resume
Linus Torvalds [Wed, 11 Jul 2012 19:15:15 +0000 (12:15 -0700)]
Merge tag 'driver-core-3.5-rc6' of git://git./linux/kernel/git/gregkh/driver-core
Pull printk fixes from Greg Kroah-Hartman:
"Here are some more printk fixes for 3.5-rc6. They resolve all known
outstanding issues with the printk changes that have been happening.
They have been tested by the people reporting the problems.
This hopefully should be it for the printk stuff for 3.5-final.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kmsg: merge continuation records while printing
kmsg: /proc/kmsg - support reading of partial log records
kmsg: make sure all messages reach a newly registered boot console
kmsg: properly handle concurrent non-blocking read() from /proc/kmsg
kmsg: add the facility number to the syslog prefix
kmsg: escape the backslash character while exporting data
printk: replacing the raw_spin_lock/unlock with raw_spin_lock/unlock_irq
Linus Torvalds [Wed, 11 Jul 2012 18:53:31 +0000 (11:53 -0700)]
Merge tag 'usb-3.5-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are a few fixes and new device ids for the 3.5-rc6 tree.
The PCI changes resolve a long-standing issue with resuming some EHCI
controllers. It has been acked by the PCI maintainer, and he asked
for it to go through my USB tree instead of his.
The xhci patches also resolve a number of reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'usb-3.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
PCI: EHCI: fix crash during suspend on ASUS computers
USB: cdc-wdm: fix lockup on error in wdm_read
USB: metro-usb: fix tty_flip_buffer_push use
USB: option: Add MEDIATEK product ids
USB: option: add ZTE MF60
xhci: Fix hang on back-to-back Set TR Deq Ptr commands.
usb: Add support for root hub port status CAS
Linus Torvalds [Wed, 11 Jul 2012 18:29:59 +0000 (11:29 -0700)]
Merge tag 'char-misc-3.5-rc6' of git://git./linux/kernel/git/gregkh/char-misc
Pull misc fix from Greg Kroah-Hartman:
"Here's a single MEI driver fix that resolves a regression from 3.4
that a number of people have reported (and sent to me in different
patches.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'char-misc-3.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: pci_resume: set IRQF_ONESHOT for msi request_threaded_irq
Linus Torvalds [Wed, 11 Jul 2012 18:28:15 +0000 (11:28 -0700)]
Merge tag 'fixes-for-v3.5-v2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull a late GPIO fix from Linus Walleij:
"Grr! So typically -next washed out a bug in the bug fixes. This v2 of
the pull request fixes another OF/DT related issue caused by fixing
another OF/DT related issue, courtesy of Gerard Sintselaar.
So please pull the v2. Or pull it on top of the other one, whatever.
Sorry for the panic mode, I'm in the middle of the Swedish woods,
supposedly on vacation."
* tag 'fixes-for-v3.5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio/gpio-tps65910: gpio_chip.of_node referenced without CONFIG_OF_GPIO defined
David Howells [Wed, 11 Jul 2012 15:11:20 +0000 (16:11 +0100)]
MN10300: Fix a missing semicolon
The declaration of arch_release_thread_info() needs a semicolon.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jerry Snitselaar [Tue, 10 Jul 2012 05:16:34 +0000 (22:16 -0700)]
gpio/gpio-tps65910: gpio_chip.of_node referenced without CONFIG_OF_GPIO defined
commit
626f9914 added code to initialize gpio_chip.of_node, but if
CONFIG_OF_GPIO is not defined gps-tps65910 fails to build with an
error complaining gpio_chip has no member of_node. I ran into this
while doing a allyesconfig build on linux-next.
Signed-off-by: Gerard Snitselaar <dev@snitselaar.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Torvalds [Tue, 10 Jul 2012 20:24:48 +0000 (13:24 -0700)]
Merge tag 'fixes-for-v3.5' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Yes, this is a *LATE* GPIO pull request with fixes for v3.5.
Grant moved across the planet and accidentally fell off the grid, so
he asked me to take over the GPIO merges for a while 10 days ago.
Since then I went over the archives and collected this pile of fixes,
and pulled two of them from the TI maintainer Kevin Hilman. Then
waited for them to at least hit linux-next once or twice."
GPIO fixes for v3.5:
- Invalid context restore on bank 0 for OMAP driver in runtime
suspend/resume cycle
- Check for NULL platform data in sta-2x11 driver
- Constrain selection of the V1 MSM GPIO driver to applicable platforms
(Kconfig issue)
- Make sure the correct output value is set in the wm8994 driver
- Export devm_gpio_request_one() so it can be used in modules.
Apparently some in-kernel modules can be configured to use this
leading to breakage.
- Check that the GPIO is valid in the lantiq driver
- Fix the flag bits introduced for v3.5, so they don't overlap
- Fix a device tree intialization bug for imx21-compatible devices
- Carry over the OF node to the TPS65910 GPIO chip struct
* tag 'fixes-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: tps65910: initialize of_node of gpio_chip
gpio/mxc: make irqs work for fsl,imx21-gpio devices
gpio: fix bits conflict for gpio flags
mips: pci-lantiq: Fix check for valid gpio
gpio: export devm_gpio_request_one
gpiolib: wm8994: Pay attention to the value set when enabling as output
gpio/msm_v1: CONFIG_GPIO_MSM_V1 is only available on three SoCs
gpio-sta2x11: don't use pdata if null
gpio/omap: fix invalid context restore of gpio bank-0
gpio/omap: fix irq loss while in idle with debounce on
Linus Torvalds [Tue, 10 Jul 2012 20:06:05 +0000 (13:06 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
Pull powerpc fixes from Benjamin Herrenschmidt:
"It looks like my rewrite of our lazy irq scheme is still exposing
"interesting" issues left and right. The previous fixes are now
causing an occasional BUG_ON to trigger (which this patch turns into a
WARN_ON while at it), due to another issue of disconnect of the lazy
irq state vs the processor state in the idle loop on pseries and
cell.
This should fix it properly once for all moving the nasty code to a
common helper function.
There's also couple more fixes for some debug stuff that didn't build
(and helped resolving those problems so it's worth having), along with
a compile fix for newer gcc's."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
tty/hvc_opal: Fix debug function name
powerpc/numa: Avoid stupid uninitialized warning from gcc
powerpc: Fix build of some debug irq code
powerpc: More fixes for lazy IRQ vs. idle
Jonathan Nieder [Sun, 8 Jul 2012 19:55:14 +0000 (21:55 +0200)]
ACPI / PM: Leave Bus Master Arbitration enabled for suspend/resume
This is an old suspend/resume lockup fix:
commit
2780cc4660e1
Author: Len Brown <len.brown@intel.com>
Date: Thu Dec 23 13:43:30 2004 -0500
[ACPI] Fix suspend/resume lockup issue
by leaving Bus Master Arbitration enabled.
The ACPI spec mandates it be disabled only for C3.
http://bugzilla.kernel.org/show_bug.cgi?id=3599
Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The bug snuck back in in commit
2feec47d4c5f (ACPICA: ACPI 5: Support
for new FADT SleepStatus, SleepControl registers, 2012-02-14),
presumably by copy/pasting a copy of the code without that fix for the
legacy case.
On affected machines, after that commit, the machine locks up hard on
resume from suspend. The same fix as seven years ago still works.
Addresses <https://bugzilla.kernel.org/show_bug.cgi?id=43641>.
Reported-bisected-and-tested-by: Octavio Alvarez <alvarezp@alvarezp.com>
Reported-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Linus Torvalds [Tue, 10 Jul 2012 19:49:32 +0000 (12:49 -0700)]
Revert "of: match by compatible property first"
This reverts commit
107a84e61cdd3406c842a0e4be7efffd3a05dba6.
Meelis Roos reports a regression since 3.5-rc5 that stops Sun Fire V100
and Sun Netra X1 sparc64 machines from booting, hanging after enabling
serial console. He bisected it to commit
107a84e61cdd.
Rob Herring explains:
"The problem is match combinations of compatible plus name and/or type
fail to match correctly. I have a fix for this, but given how late it
is for 3.5 I think it is best to revert this for now. There could be
other cases that rely on the current although wrong behavior. I will
post an updated version for 3.6."
Bisected-and-reported-by: Meelis Roos <mroos@linux.ee>
Requested-by: Rob Herring <rob.herring@calxeda.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tomas Winkler [Wed, 27 Jun 2012 14:14:20 +0000 (17:14 +0300)]
mei: pci_resume: set IRQF_ONESHOT for msi request_threaded_irq
when the default irq quick handler is used then IRQF_ONESHOT must be set
otherwise the request fails and following error is displayed:
mei 0000:00:16.0: irq 48 for MSI/MSI-X
genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 48
mei 0000:00:16.0: request_threaded_irq failed: irq = 48.
dpm_run_callback(): pci_pm_resume+0x0/0x140 returns -22
PM: Device 0000:00:16.0 failed to resume async: error -22
Reported-by: Peter Wu <lekensteyn@gmail.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Peter Wu <lekensteyn@gmail.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable <stable@vger.kernel.org> # 3.5
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Mon, 9 Jul 2012 15:09:21 +0000 (11:09 -0400)]
PCI: EHCI: fix crash during suspend on ASUS computers
Quite a few ASUS computers experience a nasty problem, related to the
EHCI controllers, when going into system suspend. It was observed
that the problem didn't occur if the controllers were not put into the
D3 power state before starting the suspend, and commit
151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during
suspend on ASUS computers) was created to do this.
It turned out this approach messed up other computers that didn't have
the problem -- it prevented USB wakeup from working. Consequently
commit
c2fb8a3fa25513de8fedb38509b1f15a5bbee47b (USB: add
NO_D3_DURING_SLEEP flag and revert
151b61284776be2) was merged; it
reverted the earlier commit and added a whitelist of known good board
names.
Now we know the actual cause of the problem. Thanks to AceLan Kao for
tracking it down.
According to him, an engineer at ASUS explained that some of their
BIOSes contain a bug that was added in an attempt to work around a
problem in early versions of Windows. When the computer goes into S3
suspend, the BIOS tries to verify that the EHCI controllers were first
quiesced by the OS. Nothing's wrong with this, but the BIOS does it
by checking that the PCI COMMAND registers contain 0 without checking
the controllers' power state. If the register isn't 0, the BIOS
assumes the controller needs to be quiesced and tries to do so. This
involves making various MMIO accesses to the controller, which don't
work very well if the controller is already in D3. The end result is
a system hang or memory corruption.
Since the value in the PCI COMMAND register doesn't matter once the
controller has been suspended, and since the value will be restored
anyway when the controller is resumed, we can work around the BIOS bug
simply by setting the register to 0 during system suspend. This patch
(as1590) does so and also reverts the second commit mentioned above,
which is now unnecessary.
In theory we could do this for every PCI device. However to avoid
introducing new problems, the patch restricts itself to EHCI host
controllers.
Finally the affected systems can suspend with USB wakeup working
properly.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=37632
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42728
Based-on-patch-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Dâniel Fraga <fragabr@gmail.com>
Tested-by: Javier Marcet <jmarcet@gmail.com>
Tested-by: Andrey Rahmatullin <wrar@wrar.name>
Tested-by: Oleksij Rempel <bug-track@fisher-privat.net>
Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: stable <stable@vger.kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 10 Jul 2012 14:12:39 +0000 (16:12 +0200)]
Merge tag 'omap-fixes-for-v3.5-rc6' of git://git./linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren <tony@atomide.com>:
Here is one PM regression fix and a defconfig change to disable
echi-omap because the driver currently causes issues with PM.
This annoys Kevin as it makes it harder for him to validate that
PM is working. The proper fixes for the echi-omap are being
discussed, but looks like it will not be properly working with PM
until in v3.7.
* tag 'omap-fixes-for-v3.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable it
ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Benjamin Herrenschmidt [Wed, 4 Jul 2012 05:51:10 +0000 (15:51 +1000)]
tty/hvc_opal: Fix debug function name
udbg_init_debug_opal() should be udbg_init_debug_opal_raw() as
the caller in arch/powerpc/kernel/udbg.c expects
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Thu, 5 Jul 2012 16:30:33 +0000 (16:30 +0000)]
powerpc/numa: Avoid stupid uninitialized warning from gcc
Newer gcc are being a bit blind here (it's pretty obvious we don't
reach the code path using the array if we haven't initialized the
pointer) but none of that is performance critical so let's just
silence it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 10 Jul 2012 08:37:56 +0000 (18:37 +1000)]
powerpc: Fix build of some debug irq code
There was a typo, checking for CONFIG_TRACE_IRQFLAG instead of
CONFIG_TRACE_IRQFLAGS causing some useful debug code to not be
built
This in turns causes a build error on BookE 64-bit due to incorrect
semicolons at the end of a couple of macros, so let's fix that too
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: stable@vger.kernel.org [v3.4]
Benjamin Herrenschmidt [Tue, 10 Jul 2012 08:36:40 +0000 (18:36 +1000)]
powerpc: More fixes for lazy IRQ vs. idle
Looks like we still have issues with pSeries and Cell idle code
vs. the lazy irq state. In fact, the reset fixes that went upstream
are exposing the problem more by causing BUG_ON() to trigger (which
this patch turns into a WARN_ON instead).
We need to be careful when using a variant of low power state that
has the side effect of turning interrupts back on, to properly set
all the SW & lazy state to look as if everything is enabled before
we enter the low power state with MSR:EE off as we will return with
MSR:EE on. If not, we have a discrepancy of state which can cause
things to go very wrong later on.
This patch moves the logic into a helper and uses it from the
pseries and cell idle code. The power4/970 idle code already got
things right (in assembly even !) so I'm not touching it. The power7
"bare metal" idle code is subtly different and correct. Remains PA6T
and some hypervisor based Cell platforms which have questionable
code in there, but they are mostly dead platforms so I'll fix them
when I manage to get final answers from the respective maintainers
about how the low power state actually works on them.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: stable@vger.kernel.org [v3.4]
Linus Torvalds [Mon, 9 Jul 2012 20:43:02 +0000 (13:43 -0700)]
Merge tag 'regulator-3.5' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A smallish fix for a lock dependency issue which affects a bunch of
Qualcomm boards that do unusually complicated things with their
regulators, the API is unlikely to be called by any other system."
* tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix recursive mutex lockdep warning
Hans de Goede [Sun, 8 Jul 2012 17:41:14 +0000 (19:41 +0200)]
gspca_sn9c20x: Fix NULL pointer dereference
Don't call v4l2_ctrl_g_ctrl on ctrls which the model cam in question
does not have.
Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ Taken directly, since Mauro is on vacation ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 9 Jul 2012 20:39:56 +0000 (13:39 -0700)]
Merge tag 'virtio-for-linus' of git://git./linux/kernel/git/rusty/linux-2.6-for-linus
Pull minor virtio-balloon fix from Rusty Russell:
"Theoretical fix, which greatly simplifies upcoming balloon patches
which will go in via some vm tree."
* tag 'virtio-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
virtio-balloon: fix add/get API use
Linus Torvalds [Mon, 9 Jul 2012 20:24:00 +0000 (13:24 -0700)]
Merge tag 'rpmsg-3.5-fixes' of git://git./linux/kernel/git/ohad/rpmsg
Pull rpmsg fixes from Ohad Ben-Cohen:
"Fixing two (somewhat rare) endpoint-related race issues, both of which
were reported by Fernando Guzman Lugo."
* tag 'rpmsg-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg:
rpmsg: make sure inflight messages don't invoke just-removed callbacks
rpmsg: avoid premature deallocation of endpoints
Linus Torvalds [Mon, 9 Jul 2012 20:23:21 +0000 (13:23 -0700)]
Merge tag 'remoteproc-3.5-fixes' of git://git./linux/kernel/git/ohad/remoteproc
Pull remoteproc fixes from Ohad Ben-Cohen:
"Two build-related remoteproc fixes for 3.5."
* tag 'remoteproc-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
remoteproc: fix missing CONFIG_FW_LOADER configurations
remoteproc/omap: fix randconfig unmet direct dependencies
Linus Torvalds [Mon, 9 Jul 2012 20:22:40 +0000 (13:22 -0700)]
Merge tag 'hwspinlock-3.5-fixes' of git://git./linux/kernel/git/ohad/hwspinlock
Pull hwspinlock fix from Ohad Ben-Cohen:
"A single hwspinlock core fix for multiple hwspinlock devices
scenarios, from Shinya Kuribayashi."
* tag 'hwspinlock-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock:
hwspinlock/core: use global ID to register hwspinlocks on multiple devices
Kay Sievers [Mon, 9 Jul 2012 19:15:42 +0000 (12:15 -0700)]
kmsg: merge continuation records while printing
In (the unlikely) case our continuation merge buffer is busy, we unfortunately
can not merge further continuation printk()s into a single record and have to
store them separately, which leads to split-up output of these lines when they
are printed.
Add some flags about newlines and prefix existence to these records and try to
reconstruct the full line again, when the separated records are printed.
Reported-By: Michael Neuling <mikey@neuling.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Tested-By: Michael Neuling <mikey@neuling.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Mon, 9 Jul 2012 18:02:28 +0000 (20:02 +0200)]
Merge branch 'kevin' into fixes
Linus Torvalds [Mon, 9 Jul 2012 17:57:21 +0000 (10:57 -0700)]
Merge tag 'iommu-fixes-v3.5-rc5' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"The patches fix several issues in the AMD IOMMU driver, the NVidia
SMMU driver, and the DMA debug code.
The most important fix for the AMD IOMMU solves a problem with SR-IOV
devices where virtual functions did not work with IOMMU enabled. The
NVidia SMMU patch fixes a possible sleep while spin-lock situation
(queued the small fix for v3.5, a better but more intrusive fix is
coming for v3.6). The DMA debug patches fix a possible data
corruption issue due to bool vs u32 usage."
* tag 'iommu-fixes-v3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: fix type bug in flush code
dma-debug: debugfs_create_bool() takes a u32 pointer
iommu/tegra: smmu: Fix unsleepable memory allocation
iommu/amd: Initialize dma_ops for hotplug and sriov devices
iommu/amd: Fix missing iommu_shutdown initialization in passthrough mode
Kay Sievers [Mon, 9 Jul 2012 17:05:10 +0000 (10:05 -0700)]
kmsg: /proc/kmsg - support reading of partial log records
Restore support for partial reads of any size on /proc/kmsg, in case the
supplied read buffer is smaller than the record size.
Some people seem to think is is ia good idea to run:
$ dd if=/proc/kmsg bs=1 of=...
as a klog bridge.
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44211
Reported-by: Jukka Ollila <jiiksteri@gmail.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin Hilman [Fri, 6 Jul 2012 18:20:28 +0000 (11:20 -0700)]
ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable it
The EHCI driver is not stable enough to be enabled by default. In v3.5,
it has at least the following problems:
- warning dump during bootup
- hang during suspend
- prevents CORE powerdomain from entering retention during idle (even
when no USB devices connected.)
This demonstrates that this driver has not been thoroughly tested and
therfore should not be enabled in the default defconfig.
In addition, the problems above cause new PM regressions which need be
addressed before this driver should be enabled in the default
defconfig.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Michael S. Tsirkin [Mon, 2 Jul 2012 07:33:08 +0000 (10:33 +0300)]
virtio-balloon: fix add/get API use
Since
ee7cd8981e15bcb365fc762afe3fc47b8242f630 'virtio: expose added
descriptors immediately.', in virtio balloon virtqueue_get_buf might
now run concurrently with virtqueue_kick. I audited both and this
seems safe in practice but this is not guaranteed by the API.
Additionally, a spurious interrupt might in theory make
virtqueue_get_buf run in parallel with virtqueue_add_buf, which is
racy.
While we might try to protect against spurious callbacks it's
easier to fix the driver: balloon seems to be the only one
(mis)using the API like this, so let's just fix balloon.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (removed unused var)
Linus Torvalds [Sun, 8 Jul 2012 16:09:27 +0000 (09:09 -0700)]
Merge branch 'for-3.5-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"The previous cgroup pull request contained a patch to fix a race
condition during cgroup hierarchy umount. Unfortunately, while the
patch reduced the race window such that the test case I and Sasha were
using didn't trigger it anymore, it wasn't complete - Shyju and Li
could reliably trigger the race condition using a different test case.
The problem wasn't the gap between dentry deletion and release which
the previous patch tried to fix. The window was between the last
dput() of a root's child and the resulting dput() of the root. For
cgroup dentries, the deletion and release always happen synchronously.
As this releases the s_active ref, the refcnt of the root dentry,
which doesn't hold s_active, stays above zero without the
corresponding s_active. If umount was in progress, the last
deactivate_super() proceeds to destory the superblock and triggers
BUG() on the non-zero root dentry refcnt after shrinking.
This issue surfaced because cgroup dentries are now allowed to linger
after rmdir(2) since 3.5-rc1. Before, rmdir synchronously drained the
dentry refcnt and the s_active acquired by rmdir from vfs layer
protected the whole thing. After 3.5-rc1, cgroup may internally hold
and put dentry refs after rmdir finishes and the delayed dput()
doesn't have surrounding s_active ref exposing this issue.
This pull request contains two patches - one reverting the previous
incorrect fix and the other adding the surrounding s_active ref around
the delayed dput().
This is quite late in the release cycle but the change is on the safer
side and fixes the test cases reliably, so I don't think it's too
crazy."
* 'for-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix cgroup hierarchy umount race
Revert "cgroup: superblock can't be released with active dentries"
Tomi Valkeinen [Wed, 4 Jul 2012 12:43:49 +0000 (18:13 +0530)]
OMAPDSS: fix warnings if CONFIG_PM_RUNTIME=n
If runtime PM is not enabled in the kernel config, pm_runtime_get_sync()
will always return 1 and pm_runtime_put_sync() will always return
-ENOSYS. pm_runtime_get_sync() returning 1 presents no problem to the
driver, but -ENOSYS from pm_runtime_put_sync() causes the driver to
print a warning.
One option would be to ignore errors returned by pm_runtime_put_sync()
totally, as they only say that the call was unable to put the hardware
into suspend mode.
However, I chose to ignore the returned -ENOSYS explicitly, and print a
warning for other errors, as I think we should get notified if the HW
failed to go to suspend properly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Tomi Valkeinen [Wed, 4 Jul 2012 12:43:48 +0000 (18:13 +0530)]
OMAPDSS: Use PM notifiers for system suspend
The current way how omapdss handles system suspend and resume is that
omapdss device (a platform device, which is not part of the device
hierarchy of the DSS HW devices, like DISPC and DSI, or panels.) uses
the suspend and resume callbacks from platform_driver to handle system
suspend. It does this by disabling all enabled panels on suspend, and
resuming the previously disabled panels on resume.
This presents a few problems.
One is that as omapdss device is not related to the panel devices or the
DSS HW devices, there's no ordering in the suspend process. This means
that suspend could be first ran for DSS HW devices and panels, and only
then for omapdss device. Currently this is not a problem, as DSS HW
devices and panels do not handle suspend.
Another, more pressing problem, is that when suspending or resuming, the
runtime PM functions return -EACCES as runtime PM is disabled during
system suspend. This causes the driver to print warnings, and operations
to fail as they think that they failed to bring up the HW.
This patch changes the omapdss suspend handling to use PM notifiers,
which are called before suspend and after resume. This way we have a
normally functioning system when we are suspending and resuming the
panels.
This patch, I believe, creates a problem that somebody could enable or
disable a panel between PM_SUSPEND_PREPARE and the system suspend, and
similarly the other way around in resume. I choose to ignore the problem
for now, as it sounds rather unlikely, and if it happens, it's not
fatal.
In the long run the system suspend handling of omapdss and panels should
be thought out properly. The current approach feels rather hacky.
Perhaps the panel drivers should handle system suspend, or the users of
omapdss (omapfb, omapdrm) should handle system suspend.
Note that after this patch we could probably revert
0eaf9f52e94f756147dbfe1faf1f77a02378dbf9 (OMAPDSS: use sync versions of
pm_runtime_put). But as I said, this patch may be temporary, so let's
leave the sync version still in place.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Jassi Brar <jaswinder.singh@linaro.org>
Tested-by: Jassi Brar <jaswinder.singh@linaro.org>
Tested-by: Joe Woodward <jw@terrafix.co.uk>
Signed-off-by: Archit Taneja <archit@ti.com>
[fts: fixed 2 brace coding style issues]
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Eddie Wai [Fri, 29 Jun 2012 23:37:35 +0000 (16:37 -0700)]
[SCSI] bnx2i: Removed the reference to the netdev->base_addr
The netdev->base_addr parameter has been deprecated in the L2 bnx2
driver. This is used by bnx2i for the BARn iomapping.
This patch will directly reference the pci_resource_start instead
of using the deprecated netdev->base_addr.
This patch is actually a critical bug fix as the 1G bnx2 driver no
longer supports the netdev->base_addr in the current kernel of the scsi
tree. This means that Broadcom's 1G Linux iSCSI offload solution would
not work at all without this patch.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Dan Williams [Fri, 22 Jun 2012 17:52:34 +0000 (10:52 -0700)]
[SCSI] libsas: fix taskfile corruption in sas_ata_qc_fill_rtf
fill_result_tf() grabs the taskfile flags from the originating qc which
sas_ata_qc_fill_rtf() promptly overwrites. The presence of an
ata_taskfile in the sata_device makes it tempting to just copy the full
contents in sas_ata_qc_fill_rtf(). However, libata really only wants
the fis contents and expects the other portions of the taskfile to not
be touched by ->qc_fill_rtf. To that end store a fis buffer in the
sata_device and use ata_tf_from_fis() like every other ->qc_fill_rtf()
implementation.
Cc: <stable@vger.kernel.org>
Reported-by: Praveen Murali <pmurali@logicube.com>
Tested-by: Praveen Murali <pmurali@logicube.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Mark Rustad [Thu, 21 Jun 2012 19:23:42 +0000 (12:23 -0700)]
[SCSI] Fix NULL dereferences in scsi_cmd_to_driver
Avoid crashing if the private_data pointer happens to be NULL. This has
been seen sometimes when a host reset happens, notably when there are
many LUNs:
host3: Assigned Port ID 0c1601
scsi host3: libfc: Host reset succeeded on port (0c1601)
BUG: unable to handle kernel NULL pointer dereference at
0000000000000350
IP: [<
ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0
<snip>
Process scsi_eh_3 (pid: 4144, threadinfo
ffff88030920c000, task
ffff880326b160c0)
Stack:
000000010372e6ba 0000000000000282 000027100920dca0 ffffffffa0038ee0
0000000000000000 0000000000030003 ffff88030920dc80 ffff88030920dc80
00000002000e0000 0000000a00004000 ffff8803242f7760 ffff88031326ed80
Call Trace:
[<
ffffffff8105b590>] ? lock_timer_base+0x70/0x70
[<
ffffffff81352fbe>] scsi_eh_tur+0x3e/0xc0
[<
ffffffff81353a36>] scsi_eh_test_devices+0x76/0x170
[<
ffffffff81354125>] scsi_eh_host_reset+0x85/0x160
[<
ffffffff81354291>] scsi_eh_ready_devs+0x91/0x110
[<
ffffffff813543fd>] scsi_unjam_host+0xed/0x1f0
[<
ffffffff813546a8>] scsi_error_handler+0x1a8/0x200
[<
ffffffff81354500>] ? scsi_unjam_host+0x1f0/0x1f0
[<
ffffffff8106ec3e>] kthread+0x9e/0xb0
[<
ffffffff81509264>] kernel_thread_helper+0x4/0x10
[<
ffffffff8106eba0>] ? kthread_freezable_should_stop+0x70/0x70
[<
ffffffff81509260>] ? gs_change+0x13/0x13
Code: 25 28 00 00 00 48 89 45 c8 31 c0 48 8b 87 80 00 00 00 48 8d b5 60 ff ff ff 89 d1 48 89 fb 41 89 d6 4c 89 fa 48 8b 80 b8 00 00 00
<48> 8b 80 50 03 00 00 48 8b 00 48 89 85 38 ff ff ff 48 8b 07 4c
RIP [<
ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0
RSP <
ffff88030920dc50>
CR2:
0000000000000350
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Linus Torvalds [Sun, 8 Jul 2012 00:23:56 +0000 (17:23 -0700)]
Linux 3.5-rc6
Linus Torvalds [Sun, 8 Jul 2012 00:21:59 +0000 (17:21 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull security docs update from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: Minor improvements to no_new_privs documentation
Linus Torvalds [Sat, 7 Jul 2012 17:17:00 +0000 (10:17 -0700)]
vfs: make O_PATH file descriptors usable for 'fchdir()'
We already use them for openat() and friends, but fchdir() also wants to
be able to use O_PATH file descriptors. This should make it comparable
to the O_SEARCH of Solaris. In particular, O_PATH allows you to access
(not-quite-open) a directory you don't have read persmission to, only
execute permission.
Noticed during development of multithread support for ksh93.
Reported-by: ольга крыжановская <olga.kryzhanovska@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org # O_PATH introduced in 3.0+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Sat, 7 Jul 2012 23:08:18 +0000 (16:08 -0700)]
cgroup: fix cgroup hierarchy umount race
48ddbe1946 "cgroup: make css->refcnt clearing on cgroup removal
optional" allowed a css to linger after the associated cgroup is
removed. As a css holds a reference on the cgroup's dentry, it means
that cgroup dentries may linger for a while.
Destroying a superblock which has dentries with positive refcnts is a
critical bug and triggers BUG() in vfs code. As each cgroup dentry
holds an s_active reference, any lingering cgroup has both its dentry
and the superblock pinned and thus preventing premature release of
superblock.
Unfortunately, after
48ddbe1946, there's a small window while
releasing a cgroup which is directly under the root of the hierarchy.
When a cgroup directory is released, vfs layer first deletes the
corresponding dentry and then invokes dput() on the parent, which may
recurse further, so when a cgroup directly below root cgroup is
released, the cgroup is first destroyed - which releases the s_active
it was holding - and then the dentry for the root cgroup is dput().
This creates a window where the root dentry's refcnt isn't zero but
superblock's s_active is. If umount happens before or during this
window, vfs will see the root dentry with non-zero refcnt and trigger
BUG().
Before
48ddbe1946, this problem didn't exist because the last dentry
reference was guaranteed to be put synchronously from rmdir(2)
invocation which holds s_active around the whole process.
Fix it by holding an extra superblock->s_active reference across
dput() from css release, which is the dput() path added by
48ddbe1946
and the only one which doesn't hold an extra s_active ref across the
final cgroup dput().
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <
4FEEA5CB.
8070809@huawei.com>
Reported-by: shyju pv <shyju.pv@huawei.com>
Tested-by: shyju pv <shyju.pv@huawei.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Tejun Heo [Sat, 7 Jul 2012 22:55:47 +0000 (15:55 -0700)]
Revert "cgroup: superblock can't be released with active dentries"
This reverts commit
fa980ca87d15bb8a1317853f257a505990f3ffde. The
commit was an attempt to fix a race condition where a cgroup hierarchy
may be unmounted with positive dentry reference on root cgroup. While
the commit made the race condition slightly more difficult to trigger,
the race was still there and could be reliably triggered using a
different test case.
Revert the incorrect fix. The next commit will describe the race and
fix it correctly.
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <
4FEEA5CB.
8070809@huawei.com>
Reported-by: shyju pv <shyju.pv@huawei.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Shinya Kuribayashi [Sat, 7 Jul 2012 10:37:42 +0000 (13:37 +0300)]
hwspinlock/core: use global ID to register hwspinlocks on multiple devices
Commit
300bab9770 (hwspinlock/core: register a bank of hwspinlocks in a
single API call, 2011-09-06) introduced 'hwspin_lock_register_single()'
to register numerous (a bank of) hwspinlock instances in a single API,
'hwspin_lock_register()'.
At which time, 'hwspin_lock_register()' accidentally passes 'local IDs'
to 'hwspin_lock_register_single()', despite that ..._single() requires
'global IDs' to register hwspinlocks.
We have to convert into global IDs by supplying the missing 'base_id'.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
[ohad: fix error path of hwspin_lock_register, too]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Linus Torvalds [Sat, 7 Jul 2012 18:20:59 +0000 (11:20 -0700)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
"Last merge window, we had some updates from Al cleaning up the signal
restart handling. These have caused some problems on ARM, and while
Al has some fixes, we have some concerns with Al's patches but we've
been unsuccesful with discussing this.
We have got to the point where we need to do something, and we've
decided that the best solution is to revert the appropriate commits
until Al is able to reply to us.
Also included here are four patches to fix warnings that I've noticed
in my build system, and one fix for kprobes test code."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: fix warning caused by wrongly typed arm_dma_limit
ARM: fix warnings about atomic64_read
ARM: 7440/1: kprobes: only test 'sub pc, pc, #1b-2b+8-2' on ARMv6
ARM: 7441/1: perf: return -EOPNOTSUPP if requested mode exclusion is unavailable
ARM: 7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK"
ARM: 7442/1: Revert "remove unused restart trampoline"
ARM: fix set_domain() macro
ARM: fix mach-versatile/pci.c warning
Andy Lutomirski [Thu, 5 Jul 2012 18:23:24 +0000 (11:23 -0700)]
security: Minor improvements to no_new_privs documentation
The documentation didn't actually mention how to enable no_new_privs.
This also adds a note about possible interactions between
no_new_privs and LSMs (i.e. why teaching systemd to set no_new_privs
is not necessarily a good idea), and it references the new docs
from include/linux/prctl.h.
Suggested-by: Rob Landley <rob@landley.net>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Linus Torvalds [Fri, 6 Jul 2012 22:32:18 +0000 (15:32 -0700)]
Merge tag 'ecryptfs-3.5-rc6-fixes' of git://git./linux/kernel/git/tyhicks/ecryptfs
Pull eCryptfs fixes from Tyler Hicks:
"Fixes an incorrect access mode check when preparing to open a file in
the lower filesystem. This isn't an urgent fix, but it is simple and
the check was obviously incorrect.
Also fixes a couple important bugs in the eCryptfs miscdev interface.
These changes are low risk due to the small number of users that use
the miscdev interface. I was able to keep the changes minimal and I
have some cleaner, more complete changes queued up for the next merge
window that will build on these patches."
* tag 'ecryptfs-3.5-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: Gracefully refuse miscdev file ops on inherited/passed files
eCryptfs: Fix lockdep warning in miscdev operations
eCryptfs: Properly check for O_RDONLY flag before doing privileged open
Linus Torvalds [Fri, 6 Jul 2012 20:59:50 +0000 (13:59 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull target fixes from Nicholas Bellinger:
"Two minor target fixes. There is really nothing exciting and/or
controversial this time around.
There's one fix from MDR for a RCU debug warning message within tcm_fc
code (CC'ed to stable), and a small AC fix for qla_target.c based upon
a recent Coverity static report.
Also, there is one other outstanding virtio-scsi LUN scanning bugfix
that has been uncovered with the in-flight tcm_vhost driver over the
last days, and that needs to make it into 3.5 final too. This patch
has been posted to linux-scsi again here:
http://marc.info/?l=linux-scsi&m=
134160609212542&w=2
and I've asked James to include it in his next PULL request."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
qla2xxx: print the right array elements in qlt_async_event
tcm_fc: Resolve suspicious RCU usage warnings
Tyler Hicks [Mon, 11 Jun 2012 16:24:11 +0000 (09:24 -0700)]
eCryptfs: Gracefully refuse miscdev file ops on inherited/passed files
File operations on /dev/ecryptfs would BUG() when the operations were
performed by processes other than the process that originally opened the
file. This could happen with open files inherited after fork() or file
descriptors passed through IPC mechanisms. Rather than calling BUG(), an
error code can be safely returned in most situations.
In ecryptfs_miscdev_release(), eCryptfs still needs to handle the
release even if the last file reference is being held by a process that
didn't originally open the file. ecryptfs_find_daemon_by_euid() will not
be successful, so a pointer to the daemon is stored in the file's
private_data. The private_data pointer is initialized when the miscdev
file is opened and only used when the file is released.
https://launchpad.net/bugs/994247
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Alan Cox [Wed, 4 Jul 2012 15:35:35 +0000 (16:35 +0100)]
qla2xxx: print the right array elements in qlt_async_event
Based upon Alan's patch from Coverity scan id 793583, these debug
messages in qlt_async_event() should be starting from byte 0, which is
always the Asynchronous Event Status Code from the parent switch statement.
Also, rename reason_code -> login_code following the language used in
2500 FW spec for Port Database Changed (0x8014) -> Port Database Changed
Event Mailbox Register for mailbox[2].
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Magnus Damm [Fri, 6 Jul 2012 08:20:05 +0000 (17:20 +0900)]
ARM: shmobile: fix platsmp.c build when ARCH_SH73A0=n
Fix build error in the case of SMP=y but ARCH_SH73A0=n
introduced by:
9601e87 ARM: shmobile: fix smp build
The use of of_machine_is_compatible() will link in the
the SoC-specific symbols:
"sh73a0_get_core_count", "sh73a0_smp_prepare_cpus",
"sh73a0_secondary_init" and "sh73a0_boot_secondary".
This patch adds an ugly #ifdef wrapper as a stop-gap
solution.
Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Mark Rustad [Tue, 26 Jun 2012 22:57:30 +0000 (15:57 -0700)]
tcm_fc: Resolve suspicious RCU usage warnings
Use rcu_dereference_protected to tell rcu that the ft_lport_lock
is held during ft_lport_create. This resolved "suspicious RCU usage"
warnings when debugging options are turned on.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Arnd Bergmann [Fri, 6 Jul 2012 19:44:51 +0000 (21:44 +0200)]
Merge branch 'ux500/fixes-3.5' into fixes
From Lee Jones <lee.jones@linaro.org>:
* ux500/fixes-3.5:
ARM: ux500: Over-ride the DT device naming scheme for pinctrl
ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set
of: address: Don't fail a lookup just because a node has no reg property
I ended up rebasing Lee's branch on 3.5-rc5 because we have more patches
lined for 3.6 that depend on them, and I want to keep all branches in
arm-soc be based on -rc releases rather than random commits in the
upstream history.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lee Jones [Fri, 6 Jul 2012 14:59:01 +0000 (15:59 +0100)]
ARM: ux500: Over-ride the DT device naming scheme for pinctrl
When pin control mapping tables are written the registered device
name is supplied for use in name-based searches within the pinctrl
driver. In the case of the DB8500 the string "pinctrl-db8500" is
used. However, when we register the driver with Device Tree, its
naming convention uses something that looks more like "pinctrl.2".
To work around the device naming inconsistencies between devices
registered via platform code and the ones registered by Device
Tree, we use AUXDATA to over-ride the Device Tree naming scheme.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Lee Jones [Fri, 15 Jun 2012 08:27:54 +0000 (09:27 +0100)]
ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set
When MACH_UX500_DT and all related Device Tree configurations are forced
off the warning and error below prevent the kernel from compiling. This
simple patch fixes both issues and allows for full build and boot of
ST-Ericsson's low-cost development board, Snowball.
Warnings fixed:
arch/arm/mach-ux500/board-mop500.c:680:32: warning: ‘snowball_of_platform_devs’ defined but not used
Errors fixed:
arch/arm/mach-ux500/timer.c: In function ‘ux500_timer_init’:
arch/arm/mach-ux500/timer.c:66:3: error: implicit declaration of function ‘of_find_matching_node’
arch/arm/mach-ux500/timer.c:66:6: warning: assignment makes pointer from integer without a cast
Cc: stable@vger.kernel.org
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Lee Jones [Thu, 5 Jul 2012 14:15:36 +0000 (15:15 +0100)]
of: address: Don't fail a lookup just because a node has no reg property
Sometimes it doesn't make any sense for a node to have an address.
In this case device lookup will always be unsuccessful because we
currently assume every node will have a reg property. This patch
changes the semantics so that the resource address and the lookup
address will only be compared if one exists.
Things like AUXDATA() rely on of_dev_lookup to return the lookup
entry of a particular device in order to do things like apply
platform_data to a device. However, this is currently broken for
nodes which do not have a reg property, meaning that platform_data
can not be passed in those cases.
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Torvalds [Fri, 6 Jul 2012 17:34:48 +0000 (10:34 -0700)]
Merge tag 'for-linus-
20120706' of git://git.infradead.org/linux-mtd
Pull two MTD fixes from David Woodhouse:
- Fix a logic error in OLPC CAFÉ NAND ready() function.
- Fix regression due to bitflip handling changes.
* tag 'for-linus-
20120706' of git://git.infradead.org/linux-mtd:
mtd: cafe_nand: fix an & vs | mistake
mtd: nand: initialize bitflip_threshold prior to BBT scanning
Andy Lutomirski [Thu, 5 Jul 2012 23:00:11 +0000 (16:00 -0700)]
mm: Hold a file reference in madvise_remove
Otherwise the code races with munmap (causing a use-after-free
of the vma) or with close (causing a use-after-free of the struct
file).
The bug was introduced by commit
90ed52ebe481 ("[PATCH] holepunch: fix
mmap_sem i_mutex deadlock")
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 6 Jul 2012 17:04:39 +0000 (10:04 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/jlbec/ocfs2
Pull ocfs2 fixes from Joel Becker.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
aio: make kiocb->private NUll in init_sync_kiocb()
ocfs2: Fix bogus error message from ocfs2_global_read_info
ocfs2: for SEEK_DATA/SEEK_HOLE, return internal error unchanged if ocfs2_get_clusters_nocache() or ocfs2_inode_lock() call failed.
ocfs2: use spinlock irqsave for downconvert lock.patch
ocfs2: Misplaced parens in unlikley
ocfs2: clear unaligned io flag when dio fails
Linus Torvalds [Fri, 6 Jul 2012 17:02:12 +0000 (10:02 -0700)]
Merge git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French.
* git://git.samba.org/sfrench/cifs-2.6:
cifs: when server doesn't set CAP_LARGE_READ_X, cap default rsize at MaxBufferSize
cifs: fix parsing of password mount option
Linus Torvalds [Fri, 6 Jul 2012 16:50:39 +0000 (09:50 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input layer fixes from Dmitry Torokhov:
"Two fixes for regressions in Wacom driver and fixes for drivers using
threaded IRQ framework without specifying IRQF_ONESHOT."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: request threaded-only IRQs with IRQF_ONESHOT
Input: wacom - don't retrieve touch_max when it is predefined
Input: wacom - fix retrieving touch_max bug
Input: fix input.h kernel-doc warning
Kay Sievers [Fri, 6 Jul 2012 16:50:09 +0000 (09:50 -0700)]
kmsg: make sure all messages reach a newly registered boot console
We suppress printing kmsg records to the console, which are already printed
immediately while we have received their fragments.
Newly registered boot consoles print the entire kmsg buffer during
registration. Clear the console-suppress flag after we skipped the record
during its first storage, so any later print will see these records as usual.
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>