git.osdn.net Git - sagit-ice-cold/kernel_xiaomi

usb: hub: Do not attempt to autosuspend disconnected devices

commit f5cccf49428447dfbc9edb7a04bb8fc316269781 upstream.

While running a bind/unbind stress test with the dwc3 usb driver on rk3399,
the following crash was observed.

Unable to handle kernel NULL pointer dereference at virtual address 00000218
pgd = ffffffc00165f000
[00000218] *pgd=000000000174f003, *pud=000000000174f003,
*pmd=0000000001750003, *pte=00e8000001751713
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac
ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat rfcomm
xt_mark fuse bridge stp llc zram btusb btrtl btbcm btintel bluetooth
ip6table_filter mwifiex_pcie mwifiex cfg80211 cdc_ether usbnet r8152 mii joydev
snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async
ppp_generic slhc tun
CPU: 1 PID: 29814 Comm: kworker/1:1 Not tainted 4.4.52 #507
Hardware name: Google Kevin (DT)
Workqueue: pm pm_runtime_work
task: ffffffc0ac540000 ti: ffffffc0af4d4000 task.ti: ffffffc0af4d4000
PC is at autosuspend_check+0x74/0x174
LR is at autosuspend_check+0x70/0x174
...
Call trace:
[<ffffffc00080dcc0>] autosuspend_check+0x74/0x174
[<ffffffc000810500>] usb_runtime_idle+0x20/0x40
[<ffffffc000785ae0>] __rpm_callback+0x48/0x7c
[<ffffffc000786af0>] rpm_idle+0x1e8/0x498
[<ffffffc000787cdc>] pm_runtime_work+0x88/0xcc
[<ffffffc000249bb8>] process_one_work+0x390/0x6b8
[<ffffffc00024abcc>] worker_thread+0x480/0x610
[<ffffffc000251a80>] kthread+0x164/0x178
[<ffffffc0002045d0>] ret_from_fork+0x10/0x40

Source:

(gdb) l *0xffffffc00080dcc0
0xffffffc00080dcc0 is in autosuspend_check
(drivers/usb/core/driver.c:1778).
1773 /* We don't need to check interfaces that are
1774 * disabled for runtime PM. Either they are unbound
1775 * or else their drivers don't support autosuspend
1776 * and so they are permanently active.
1777 */
1778 if (intf->dev.power.disable_depth)
1779 continue;
1780 if (atomic_read(&intf->dev.power.usage_count) > 0)
1781 return -EBUSY;
1782 w |= intf->needs_remote_wakeup;

Code analysis shows that intf is set to NULL in usb_disable_device() prior
to setting actconfig to NULL. At the same time, usb_runtime_idle() does not
lock the usb device, and neither does any of the functions in the
traceback. This means that there is no protection against a race condition
where usb_disable_device() is removing dev->actconfig->interface[] pointers
while those are being accessed from autosuspend_check().

To solve the problem, synchronize and validate device state between
autosuspend_check() and usb_disconnect().

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Fix error loop seen after hub communication errors

commit 245b2eecee2aac6fdc77dcafaa73c33f9644c3c7 upstream.

While stress testing a usb controller using a bind/unbind looop, the
following error loop was observed.

usb 7-1.2: new low-speed USB device number 3 using xhci-hcd
usb 7-1.2: hub failed to enable device, error -108
usb 7-1-port2: cannot disable (err = -22)
usb 7-1-port2: couldn't allocate usb_device
usb 7-1-port2: cannot disable (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: activate --> -22
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
hub 7-1:1.0: hub_ext_port_status failed (err = -22)
** 57 printk messages dropped ** hub 7-1:1.0: activate --> -22
** 82 printk messages dropped ** hub 7-1:1.0: hub_ext_port_status failed (err = -22)

This continues forever. After adding tracebacks into the code,
the call sequence leading to this is found to be as follows.

[<ffffffc0007fc8e0>] hub_activate+0x368/0x7b8
[<ffffffc0007fceb4>] hub_resume+0x2c/0x3c
[<ffffffc00080b3b8>] usb_resume_interface.isra.6+0x128/0x158
[<ffffffc00080b5d0>] usb_suspend_both+0x1e8/0x288
[<ffffffc00080c9c4>] usb_runtime_suspend+0x3c/0x98
[<ffffffc0007820a0>] __rpm_callback+0x48/0x7c
[<ffffffc00078217c>] rpm_callback+0xa8/0xd4
[<ffffffc000786234>] rpm_suspend+0x84/0x758
[<ffffffc000786ca4>] rpm_idle+0x2c8/0x498
[<ffffffc000786ed4>] __pm_runtime_idle+0x60/0xac
[<ffffffc00080eba8>] usb_autopm_put_interface+0x6c/0x7c
[<ffffffc000803798>] hub_event+0x10ac/0x12ac
[<ffffffc000249bb8>] process_one_work+0x390/0x6b8
[<ffffffc00024abcc>] worker_thread+0x480/0x610
[<ffffffc000251a80>] kthread+0x164/0x178
[<ffffffc0002045d0>] ret_from_fork+0x10/0x40

kick_hub_wq() is called from hub_activate() even after failures to
communicate with the hub. This results in an endless sequence of
hub event -> hub activate -> wq trigger -> hub event -> ...

Provide two solutions for the problem.

- Only trigger the hub event queue if communication with the hub
is successful.
- After a suspend failure, only resume already suspended interfaces
if the communication with the device is still possible.

Each of the changes fixes the observed problem. Use both to improve
robustness.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: Make sure usb/phy/of gets built-in

commit 3d6159640da9c9175d1ca42f151fc1a14caded59 upstream.

DWC3 driver uses of_usb_get_phy_mode() which is
implemented in drivers/usb/phy/of.c and in bare minimal
configuration it might not be pulled in kernel binary.

In case of ARC or ARM this could be easily reproduced with
"allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m.

On building all ends-up with:
---------------------->8------------------
  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready
  Building modules, stage 2.
  MODPOST 5 modules
ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
---------------------->8------------------

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: misc: add missing continue in switch

commit 2c930e3d0aed1505e86e0928d323df5027817740 upstream.

Add missing continue in switch.

Addresses-Coverity-ID: 1248733
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: jr3_pci: cope with jiffies wraparound

commit 8ec04a491825e08068e92bed0bba7821893b6433 upstream.

The timer expiry routine `jr3_pci_poll_dev()` checks for expiry by
checking whether the absolute value of `jiffies` (stored in local
variable `now`) is greater than the expected expiry time in jiffy units.
This will fail when `jiffies` wraps around. Also, it seems to make
sense to handle the expiry one jiffy earlier than the current test. Use
`time_after_eq()` to check for expiry.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: jr3_pci: fix possible null pointer dereference

commit 45292be0b3db0b7f8286683b376e2d9f949d11f9 upstream.

For some reason, the driver does not consider allocation of the
subdevice private data to be a fatal error when attaching the COMEDI
device.  It tests the subdevice private data pointer for validity at
certain points, but omits some crucial tests.  In particular,
`jr3_pci_auto_attach()` calls `jr3_pci_alloc_spriv()` to allocate and
initialize the subdevice private data, but the same function
subsequently dereferences the pointer to access the `next_time_min` and
`next_time_max` members without checking it first.  The other missing
test is in the timer expiry routine `jr3_pci_poll_dev()`, but it will
crash before it gets that far.

Fix the bug by returning `-ENOMEM` from `jr3_pci_auto_attach()` as soon
as one of the calls to `jr3_pci_alloc_spriv()` returns `NULL`.  The
COMEDI core will subsequently call `jr3_pci_detach()` to clean up.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: gdm_mux: fix use-after-free on module unload

commit b58f45c8fc301fe83ee28cad3e64686c19e78f1c upstream.

Make sure to deregister the USB driver before releasing the tty driver
to avoid use-after-free in the USB disconnect callback where the tty
devices are deregistered.

Fixes: 61e121047645 ("staging: gdm7240: adding LTE USB driver")
Cc: Won Kang <wkang77@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: use off stack for out buffer USB transfers.

commit 12ecd24ef93277e4e5feaf27b0b18f2d3828bc5e upstream.

Since 4.9 mandated USB buffers be heap allocated this causes the driver
to fail.

Since there is a wide range of buffer sizes use kmemdup to create
allocated buffer.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: use off stack for in buffer USB transfers.

commit 05c0cf88bec588a7cb34de569acd871ceef26760 upstream.

Since 4.9 mandated USB buffers to be heap allocated. This causes
the driver to fail.

Create buffer for USB transfers.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Proper handling of Race Condition when two USB class drivers try to call init_usb_class simultaneously

commit 2f86a96be0ccb1302b7eee7855dbee5ce4dc5dfb upstream.

There is race condition when two USB class drivers try to call
init_usb_class at the same time and leads to crash.
code path: probe->usb_register_dev->init_usb_class

To solve this, mutex locking has been added in init_usb_class() and
destroy_usb_class().

As pointed by Alan, removed "if (usb_class)" test from destroy_usb_class()
because usb_class can never be NULL there.

Signed-off-by: Ajay Kaher <ajay.kaher@samsung.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit

commit 31c5d1922b90ddc1da6a6ddecef7cd31f17aa32b upstream.

This development kit has an FT4232 on it with a custom USB VID/PID.
The FT4232 provides four UARTs, but only two are used. The UART 0
is used by the FlashPro5 programmer and UART 2 is connected to the
SmartFusion2 CortexM3 SoC UART port.

Note that the USB VID is registered to Actel according to Linux USB
VID database, but that was acquired by Microsemi.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci: print correct command ring address

commit 6fc091fb0459ade939a795bfdcaf645385b951d4 upstream.

Print correct command ring address using 'val_64'.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement

commit 197b806ae5db60c6f609d74da04ddb62ea5e1b00 upstream.

While testing modification of per se_node_acl queue_depth forcing
session reinstatement via lio_target_nacl_cmdsn_depth_store() ->
core_tpg_set_initiator_node_queue_depth(), a hung task bug triggered
when changing cmdsn_depth invoked session reinstatement while an iscsi
login was already waiting for session reinstatement to complete.

This can happen when an outstanding se_cmd descriptor is taking a
long time to complete, and session reinstatement from iscsi login
or cmdsn_depth change occurs concurrently.

To address this bug, explicitly set session_fall_back_to_erl0 = 1
when forcing session reinstatement, so session reinstatement is
not attempted if an active session is already being shutdown.

This patch has been tested with two scenarios. The first when
iscsi login is blocked waiting for iscsi session reinstatement
to complete followed by queue_depth change via configfs, and
second when queue_depth change via configfs us blocked followed
by a iscsi login driven session reinstatement.

Note this patch depends on commit d36ad77f702 to handle multiple
sessions per se_node_acl when changing cmdsn_depth, and for
pre v4.5 kernels will need to be included for stable as well.

Reported-by: Gary Guo <ghg@datera.io>
Tested-by: Gary Guo <ghg@datera.io>
Cc: Gary Guo <ghg@datera.io>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Convert ACL change queue_depth se_session reference usage

commit d36ad77f702356afb1009d2987b0ab55da4c7d57 upstream.

This patch converts core_tpg_set_initiator_node_queue_depth()
to use struct se_node_acl->acl_sess_list when performing
explicit se_tpg_tfo->shutdown_session() for active sessions,
in order for new se_node_acl->queue_depth to take effect.

This follows how core_tpg_del_initiator_node_acl() currently
works when invoking se_tpg_tfo->shutdown-session(), and ahead
of the next patch to take se_node_acl->acl_kref during lookup,
the extra get_initiator_node_acl() can go away. In order to
achieve this, go ahead and change target_get_session() to use
kref_get_unless_zero() and propigate up the return value
to know when a session is already being released.

This is because se_node_acl->acl_group is already protecting
se_node_acl->acl_group reference via configfs, and shutdown
within core_tpg_del_initiator_node_acl() won't occur until
sys_write() to core_tpg_set_initiator_node_queue_depth()
attribute returns back to user-space.

Also, drop the left-over iscsi-target hack, and obtain
se_portal_group->session_lock in lio_tpg_shutdown_session()
internally. Remove iscsi-target wrapper and unused se_tpg +
force parameters and associated code.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/fileio: Fix zero-length READ and WRITE handling

commit 59ac9c078141b8fd0186c0b18660a1b2c24e724e upstream.

This patch fixes zero-length READ and WRITE handling in target/FILEIO,
which was broken a long time back by:

Since:

  commit d81cb44726f050d7cf1be4afd9cb45d153b52066
  Author: Paolo Bonzini <pbonzini@redhat.com>
  Date:   Mon Sep 17 16:36:11 2012 -0700

      target: go through normal processing for all zero-length commands

which moved zero-length READ and WRITE completion out of target-core,
to doing submission into backend driver code.

To address this, go ahead and invoke target_complete_cmd() for any
non negative return value in fd_do_rw().

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: David Disseldorp <ddiss@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix compare_and_write_callback handling for non GOOD status

commit a71a5dc7f833943998e97ca8fa6a4c708a0ed1a9 upstream.

Following the bugfix for handling non SAM_STAT_GOOD COMPARE_AND_WRITE
status during COMMIT phase in commit 9b2792c3da1, the same bug exists
for the READ phase as well.

This would manifest first as a lost SCSI response, and eventual
hung task during fabric driver logout or re-login, as existing
shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref
to reach zero.

To address this bug, compare_and_write_callback() has been changed
to set post_ret = 1 and return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE
as necessary to signal failure status.

Reported-by: Bill Borsari <wgb@datera.io>
Cc: Bill Borsari <wgb@datera.io>
Tested-by: Gary Guo <ghg@datera.io>
Cc: Gary Guo <ghg@datera.io>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: adjust early dom0 p2m handling to xen hypervisor behavior

commit 69861e0a52f8733355ce246f0db15e1b240ad667 upstream.

When booted as pv-guest the p2m list presented by the Xen is already
mapped to virtual addresses. In dom0 case the hypervisor might make use
of 2M- or 1G-pages for this mapping. Unfortunately while being properly
aligned in virtual and machine address space, those pages might not be
aligned properly in guest physical address space.

So when trying to obtain the guest physical address of such a page
pud_pfn() and pmd_pfn() must be avoided as those will mask away guest
physical address bits not being zero in this special case.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: get rid of blk_integrity_revalidate()

commit 19b7ccf8651df09d274671b53039c672a52ad84d upstream.

Commit 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk")
introduced blk_integrity_revalidate(), which seems to assume ownership
of the stable pages flag and unilaterally clears it if no blk_integrity
profile is registered:

    if (bi->profile)
            disk->queue->backing_dev_info->capabilities |=
                    BDI_CAP_STABLE_WRITES;
    else
            disk->queue->backing_dev_info->capabilities &=
                    ~BDI_CAP_STABLE_WRITES;

It's called from revalidate_disk() and rescan_partitions(), making it
impossible to enable stable pages for drivers that support partitions
and don't use blk_integrity: while the call in revalidate_disk() can be
trivially worked around (see zram, which doesn't support partitions and
hence gets away with zram_revalidate_disk()), rescan_partitions() can
be triggered from userspace at any time.  This breaks rbd, where the
ceph messenger is responsible for generating/verifying CRCs.

Since blk_integrity_{un,}register() "must" be used for (un)registering
the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES
setting there.  This way drivers that call blk_integrity_register() and
use integrity infrastructure won't interfere with drivers that don't
but still want stable pages.

Fixes: 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk")
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
[idryomov@gmail.com: backport to < 4.11: bdi is embedded in queue]
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: fix use-after-free races in vm fault handling

commit 3089c1df10e2931b1d72d2ffa7d86431084c86b3 upstream.

The vm fault handler relies on the fact that the VMA owns a reference
to the BO. However, once mmap_sem is released, other tasks are free to
destroy the VMA, which can lead to the BO being freed. Fix two code
paths where that can happen, both related to vm fault retries.

Found via a lock debugging warning which flagged &bo->wu_mutex as
locked while being destroyed.

Fixes: cbe12e74ee4e ("drm/ttm: Allow vm fault retries")
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: sanity check segment count

commit b9dd46188edc2f0d1f37328637860bb65a771124 upstream.

F2FS uses 4 bytes to represent block address. As a result, supported
size of disk is 16 TB and it equals to 16 * 1024 * 1024 / 2 segments.

Signed-off-by: Jin Qian <jinqian@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: allocate enough space for ->ntp_fltr_bmap

[ Upstream commit ac45bd93a5035c2f39c9862b8b6ed692db0fdc87 ]

We have the number of longs, but we need to calculate the number of
bytes required.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf

[ Upstream commit 242d3a49a2a1a71d8eb9f953db1bcaa9d698ce00 ]

For each netns (except init_net), we initialize its null entry
in 3 places:

1) The template itself, as we use kmemdup()
2) Code around dst_init_metrics() in ip6_route_net_init()
3) ip6_route_dev_notify(), which is supposed to initialize it after
loopback registers

Unfortunately the last one still happens in a wrong order because
we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to
net->loopback_dev's idev, thus we have to do that after we add
idev to loopback. However, this notifier has priority == 0 same as
ipv6_dev_notf, and ipv6_dev_notf is registered after
ip6_route_dev_notifier so it is called actually after
ip6_route_dev_notifier. This is similar to commit 2f460933f58e
("ipv6: initialize route null entry in addrconf_init()") which
fixes init_net.

Fix it by picking a smaller priority for ip6_route_dev_notifier.
Also, we have to release the refcnt accordingly when unregistering
loopback_dev because device exit functions are called before subsys
exit functions.

Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: initialize route null entry in addrconf_init()

[ Upstream commit 2f460933f58eee3393aba64f0f6d14acb08d1724 ]

Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev
since it is always NULL.

This is clearly wrong, we have code to initialize it to loopback_dev,
unfortunately the order is still not correct.

loopback_dev is registered very early during boot, we lose a chance
to re-initialize it in notifier. addrconf_init() is called after
ip6_route_init(), which means we have no chance to correct it.

Fix it by moving this initialization explicitly after
ipv6_add_dev(init_net.loopback_dev) in addrconf_init().

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnetlink: NUL-terminate IFLA_PHYS_PORT_NAME string

[ Upstream commit 77ef033b687c3e030017c94a29bf6ea3aaaef678 ]

IFLA_PHYS_PORT_NAME is a string attribute, so terminate it with \0.
Otherwise libnl3 fails to validate netlink messages with this attribute.
"ip -detail a" assumes too that the attribute is NUL-terminated when
printing it. It often was, due to padding.

I noticed this as libvirtd failing to start on a system with sfc driver
after upgrading it to Linux 4.11, i.e. when sfc added support for
phys_port_name.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4, ipv6: ensure raw socket message is big enough to hold an IP header

[ Upstream commit 86f4c90a1c5c1493f07f2d12c1079f5bf01936f2 ]

raw_send_hdrinc() and rawv6_send_hdrinc() expect that the buffer copied
from the userspace contains the IPv4/IPv6 header, so if too few bytes are
copied, parts of the header may remain uninitialized.

This bug has been detected with KMSAN.

For the record, the KMSAN report:

==================================================================
BUG: KMSAN: use of unitialized memory in nf_ct_frag6_gather+0xf5a/0x44a0
inter: 0
CPU: 0 PID: 1036 Comm: probe Not tainted 4.11.0-rc5+ #2455
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x143/0x1b0 lib/dump_stack.c:52
kmsan_report+0x16b/0x1e0 mm/kmsan/kmsan.c:1078
__kmsan_warning_32+0x5c/0xa0 mm/kmsan/kmsan_instr.c:510
nf_ct_frag6_gather+0xf5a/0x44a0 net/ipv6/netfilter/nf_conntrack_reasm.c:577
ipv6_defrag+0x1d9/0x280 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
nf_hook_entry_hookfn ./include/linux/netfilter.h:102
nf_hook_slow+0x13f/0x3c0 net/netfilter/core.c:310
nf_hook ./include/linux/netfilter.h:212
NF_HOOK ./include/linux/netfilter.h:255
rawv6_send_hdrinc net/ipv6/raw.c:673
rawv6_sendmsg+0x2fcb/0x41a0 net/ipv6/raw.c:919
inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762
sock_sendmsg_nosec net/socket.c:633
sock_sendmsg net/socket.c:643
SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696
SyS_sendto+0xbc/0xe0 net/socket.c:1664
do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285
entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246
RIP: 0033:0x436e03
RSP: 002b:00007ffce48baf38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000436e03
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007ffce48baf90 R08: 00007ffce48baf50 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000401790 R14: 0000000000401820 R15: 0000000000000000
origin: 00000000d9400053
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:362
kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:257
kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:270
slab_alloc_node mm/slub.c:2735
__kmalloc_node_track_caller+0x1f4/0x390 mm/slub.c:4341
__kmalloc_reserve net/core/skbuff.c:138
__alloc_skb+0x2cd/0x740 net/core/skbuff.c:231
alloc_skb ./include/linux/skbuff.h:933
alloc_skb_with_frags+0x209/0xbc0 net/core/skbuff.c:4678
sock_alloc_send_pskb+0x9ff/0xe00 net/core/sock.c:1903
sock_alloc_send_skb+0xe4/0x100 net/core/sock.c:1920
rawv6_send_hdrinc net/ipv6/raw.c:638
rawv6_sendmsg+0x2918/0x41a0 net/ipv6/raw.c:919
inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762
sock_sendmsg_nosec net/socket.c:633
sock_sendmsg net/socket.c:643
SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696
SyS_sendto+0xbc/0xe0 net/socket.c:1664
do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285
return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246
==================================================================

, triggered by the following syscalls:
socket(PF_INET6, SOCK_RAW, IPPROTO_RAW) = 3
sendto(3, NULL, 0, 0, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "ff00::", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = -1 EPERM

A similar report is triggered in net/ipv4/raw.c if we use a PF_INET socket
instead of a PF_INET6 one.

Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not inherit fastopen_req from parent

[ Upstream commit 8b485ce69876c65db12ed390e7f9c0d2a64eff2c ]

Under fuzzer stress, it is possible that a child gets a non NULL
fastopen_req pointer from its parent at accept() time, when/if parent
morphs from listener to active session.

We need to make sure this can not happen, by clearing the field after
socket cloning.

BUG: Double free or freeing an invalid pointer
Unexpected shadow byte: 0xFB
CPU: 3 PID: 20933 Comm: syz-executor3 Not tainted 4.11.0+ #306
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x292/0x395 lib/dump_stack.c:52
kasan_object_err+0x1c/0x70 mm/kasan/report.c:164
kasan_report_double_free+0x5c/0x70 mm/kasan/report.c:185
kasan_slab_free+0x9d/0xc0 mm/kasan/kasan.c:580
slab_free_hook mm/slub.c:1357 [inline]
slab_free_freelist_hook mm/slub.c:1379 [inline]
slab_free mm/slub.c:2961 [inline]
kfree+0xe8/0x2b0 mm/slub.c:3882
tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline]
tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328
inet_child_forget+0xb8/0x600 net/ipv4/inet_connection_sock.c:898
inet_csk_reqsk_queue_add+0x1e7/0x250
net/ipv4/inet_connection_sock.c:928
tcp_get_cookie_sock+0x21a/0x510 net/ipv4/syncookies.c:217
cookie_v4_check+0x1a19/0x28b0 net/ipv4/syncookies.c:384
tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1384 [inline]
tcp_v4_do_rcv+0x731/0x940 net/ipv4/tcp_ipv4.c:1421
tcp_v4_rcv+0x2dc0/0x31c0 net/ipv4/tcp_ipv4.c:1715
ip_local_deliver_finish+0x4cc/0xc20 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:257 [inline]
ip_local_deliver+0x1ce/0x700 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:492 [inline]
ip_rcv_finish+0xb1d/0x20b0 net/ipv4/ip_input.c:396
NF_HOOK include/linux/netfilter.h:257 [inline]
ip_rcv+0xd8c/0x19c0 net/ipv4/ip_input.c:487
__netif_receive_skb_core+0x1ad1/0x3400 net/core/dev.c:4210
__netif_receive_skb+0x2a/0x1a0 net/core/dev.c:4248
process_backlog+0xe5/0x6c0 net/core/dev.c:4868
napi_poll net/core/dev.c:5270 [inline]
net_rx_action+0xe70/0x18e0 net/core/dev.c:5335
__do_softirq+0x2fb/0xb99 kernel/softirq.c:284
do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:899
</IRQ>
do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328
do_softirq kernel/softirq.c:176 [inline]
__local_bh_enable_ip+0x1cf/0x1e0 kernel/softirq.c:181
local_bh_enable include/linux/bottom_half.h:31 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:931 [inline]
ip_finish_output2+0x9ab/0x15e0 net/ipv4/ip_output.c:230
ip_finish_output+0xa35/0xdf0 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:246 [inline]
ip_output+0x1f6/0x7b0 net/ipv4/ip_output.c:404
dst_output include/net/dst.h:486 [inline]
ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124
ip_queue_xmit+0x9a8/0x1a10 net/ipv4/ip_output.c:503
tcp_transmit_skb+0x1ade/0x3470 net/ipv4/tcp_output.c:1057
tcp_write_xmit+0x79e/0x55b0 net/ipv4/tcp_output.c:2265
__tcp_push_pending_frames+0xfa/0x3a0 net/ipv4/tcp_output.c:2450
tcp_push+0x4ee/0x780 net/ipv4/tcp.c:683
tcp_sendmsg+0x128d/0x39b0 net/ipv4/tcp.c:1342
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
SYSC_sendto+0x660/0x810 net/socket.c:1696
SyS_sendto+0x40/0x50 net/socket.c:1664
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x446059
RSP: 002b:00007faa6761fb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 0000000000446059
RDX: 0000000000000001 RSI: 0000000020ba3fcd RDI: 0000000000000017
RBP: 00000000006e40a0 R08: 0000000020ba4ff0 R09: 0000000000000010
R10: 0000000020000000 R11: 0000000000000282 R12: 0000000000708150
R13: 0000000000000000 R14: 00007faa676209c0 R15: 00007faa67620700
Object at ffff88003b5bbcb8, in cache kmalloc-64 size: 64
Allocated:
PID = 20909
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:513
set_track mm/kasan/kasan.c:525 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:616
kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2745
kmalloc include/linux/slab.h:490 [inline]
kzalloc include/linux/slab.h:663 [inline]
tcp_sendmsg_fastopen net/ipv4/tcp.c:1094 [inline]
tcp_sendmsg+0x221a/0x39b0 net/ipv4/tcp.c:1139
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
SYSC_sendto+0x660/0x810 net/socket.c:1696
SyS_sendto+0x40/0x50 net/socket.c:1664
entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed:
PID = 20909
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:513
set_track mm/kasan/kasan.c:525 [inline]
kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:589
slab_free_hook mm/slub.c:1357 [inline]
slab_free_freelist_hook mm/slub.c:1379 [inline]
slab_free mm/slub.c:2961 [inline]
kfree+0xe8/0x2b0 mm/slub.c:3882
tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline]
tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328
__inet_stream_connect+0x20c/0xf90 net/ipv4/af_inet.c:593
tcp_sendmsg_fastopen net/ipv4/tcp.c:1111 [inline]
tcp_sendmsg+0x23a8/0x39b0 net/ipv4/tcp.c:1139
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
SYSC_sendto+0x660/0x810 net/socket.c:1696
SyS_sendto+0x40/0x50 net/socket.c:1664
entry_SYSCALL_64_fastpath+0x1f/0xbe

Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets")
Fixes: 7db92362d2fe ("tcp: fix potential double free issue for fastopen_req")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix wraparound issue in tcp_lp

[ Upstream commit a9f11f963a546fea9144f6a6d1a307e814a387e7 ]

Be careful when comparing tcp_time_stamp to some u32 quantity,
otherwise result can be surprising.

Fixes: 7c106d7e782b ("[TCP]: TCP Low Priority congestion control")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, arm64: fix jit branch offset related to ldimm64

[ Upstream commit ddc665a4bb4b728b4e6ecec8db1b64efa9184b9c ]

When the instruction right before the branch destination is
a 64 bit load immediate, we currently calculate the wrong
jump offset in the ctx->offset[] array as we only account
one instruction slot for the 64 bit load immediate although
it uses two BPF instructions. Fix it up by setting the offset
into the right slot after we incremented the index.

Before (ldimm64 test 1):

  [...]
  00000020:  52800007  mov w7, #0x0 // #0
  00000024:  d2800060  mov x0, #0x3 // #3
  00000028:  d2800041  mov x1, #0x2 // #2
  0000002c:  eb01001f  cmp x0, x1
  00000030:  54ffff82  b.cs 0x00000020
  00000034:  d29fffe7  mov x7, #0xffff // #65535
  00000038:  f2bfffe7  movk x7, #0xffff, lsl #16
  0000003c:  f2dfffe7  movk x7, #0xffff, lsl #32
  00000040:  f2ffffe7  movk x7, #0xffff, lsl #48
  00000044:  d29dddc7  mov x7, #0xeeee // #61166
  00000048:  f2bdddc7  movk x7, #0xeeee, lsl #16
  0000004c:  f2ddddc7  movk x7, #0xeeee, lsl #32
  00000050:  f2fdddc7  movk x7, #0xeeee, lsl #48
  [...]

After (ldimm64 test 1):

  [...]
  00000020:  52800007  mov w7, #0x0 // #0
  00000024:  d2800060  mov x0, #0x3 // #3
  00000028:  d2800041  mov x1, #0x2 // #2
  0000002c:  eb01001f  cmp x0, x1
  00000030:  540000a2  b.cs 0x00000044
  00000034:  d29fffe7  mov x7, #0xffff // #65535
  00000038:  f2bfffe7  movk x7, #0xffff, lsl #16
  0000003c:  f2dfffe7  movk x7, #0xffff, lsl #32
  00000040:  f2ffffe7  movk x7, #0xffff, lsl #48
  00000044:  d29dddc7  mov x7, #0xeeee // #61166
  00000048:  f2bdddc7  movk x7, #0xeeee, lsl #16
  0000004c:  f2ddddc7  movk x7, #0xeeee, lsl #32
  00000050:  f2fdddc7  movk x7, #0xeeee, lsl #48
  [...]

Also, add a couple of test cases to make sure JITs pass
this test. Tested on Cavium ThunderX ARMv8. The added
test cases all pass after the fix.

Fixes: 8eee539ddea0 ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()")
Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not underestimate skb->truesize in tcp_trim_head()

[ Upstream commit 7162fb242cb8322beb558828fd26b33c3e9fc805 ]

Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in
skb_try_coalesce() using syzkaller and a filter attached to a TCP
socket over loopback interface.

I believe one issue with looped skbs is that tcp_trim_head() can end up
producing skb with under estimated truesize.

It hardly matters for normal conditions, since packets sent over
loopback are never truncated.

Bytes trimmed from skb->head should not change skb truesize, since
skb->head is not reallocated.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix deadlock of controller device lock at unbinding

commit ab949d519601880fd46e8bc1445d6a453bf2dc09 upstream.

Imre Deak reported a deadlock of HD-audio driver at unbinding while
it's still in probing.  Since we probe the codecs asynchronously in a
work, the codec driver probe may still be kicked off while the
controller itself is being unbound.  And, azx_remove() tries to
process all pending tasks via cancel_work_sync() for fixing the other
races (see commit [0b8c82190c12: ALSA: hda - Cancel probe work instead
of flush at remove]), now we may meet a bizarre deadlock:

Unbind snd_hda_intel via sysfs:
  device_release_driver() ->
    device_lock(snd_hda_intel) ->
      azx_remove() ->
        cancel_work_sync(azx_probe_work)

azx_probe_work():
  codec driver probe() ->
     __driver_attach() ->
       device_lock(snd_hda_intel)

This deadlock is caused by the fact that both device_release_driver()
and driver_probe_device() take both the device and its parent locks at
the same time.  The codec device sets the controller device as its
parent, and this lock is taken before the probe() callback is called,
while the controller remove() callback gets called also with the same
lock.

In this patch, as an ugly workaround, we unlock the controller device
temporarily during cancel_work_sync() call.  The race against another
bind call should be still suppressed by the parent's device lock.

Reported-by: Imre Deak <imre.deak@intel.com>
Fixes: 0b8c82190c12 ("ALSA: hda - Cancel probe work instead of flush at remove")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: remove incorrect __init annotations

commit 4f3445067d5f78fb8d1970b02610f85c2f377ea4 upstream.

The probe function is not marked __init, but some other functions
are. This leads to a warning on older compilers (e.g. gcc-4.3),
and can cause executing freed memory when built with those
compilers:

WARNING: drivers/staging/emxx_udc/emxx_udc.o(.text+0x2d78): Section mismatch in reference from the function nbu2ss_drv_probe() to the function .init.text:nbu2ss_drv_contest_init()

This removes the annotations.

Fixes: 33aa8d45a4fe ("staging: emxx_udc: Add Emma Mobile USB Gadget driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: add missing byte order conversion

commit 2c474b8579e9b67ff72b2bcefce9f53c7f4469d4 upstream.

Conversion macros le16_to_cpu was removed and that caused new sparse warning

sparse output:
drivers/staging/wlan-ng/p80211netdev.c:241:44: warning: incorrect type in argument 2 (different base types)
drivers/staging/wlan-ng/p80211netdev.c:241:44: expected unsigned short [unsigned] [usertype] fc
drivers/staging/wlan-ng/p80211netdev.c:241:44: got restricted __le16 [usertype] fc

Fixes: 7ad82572348c ("staging:wlan-ng:Fix sparse warning")
Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: Make skb header writable before use

commit 9cc4b7cb86cbcc6330a3faa8cd65268cd2d3c227 upstream.

The driver was making changes to the skb_header without
ensuring it was writable (i.e. uncloned).
This patch also removes some boiler plate header size
checking/adjustment code as that is also handled by the
skb_cow_header function used to make header writable.

Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: Ensure pointer correctly set if skb data location changes

commit 455a1eb4654c24560eb9dfc634f29cba3d87601e upstream.

The incoming skb header may be resized if header space is
insufficient, which might change the data adddress in the skb.
Ensure that a cached pointer to that data is correctly set by
moving assignment to after any possible changes.

Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: R2-on-R6 MULTU/MADDU/MSUBU emulation bugfix

commit d65e5677ad5b3a49c43f60ec07644dc1f87bbd2e upstream.

MIPS instructions MULTU, MADDU and MSUBU emulation requires registers HI/LO
to be converted to signed 32bits before 64bit sign extension on MIPS64.

Bug was found on running MIPS32 R2 test application on MIPS64 R6 kernel.

Fixes: b0a668fb2038 ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6")
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Reported-by: Nikola.Veljkovic@imgtec.com
Cc: paul.burton@imgtec.com
Cc: yamada.masahiro@socionext.com
Cc: akpm@linux-foundation.org
Cc: andrea.gelmini@gelma.net
Cc: macro@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14043/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m

commit 2559a1ef688f933835912c731bed2254146a9b04 upstream.

The mac_scsi driver still gets disabled when SCSI=m. This should have
been fixed back when I enabled the tristate but I didn't see the bug.

Fixes: 6e9ae6d560e1 ("[PATCH] mac_scsi: Add module option to Kconfig")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_omap: Fix probe and remove for PM runtime

commit 4e0f5cc65098ea32a1e77baae74215b9bd5276b1 upstream.

Otherwise the interconnect related code implementing PM runtime will
produce these errors on a failed probe:

omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1
omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver?

Note that we now also need to check for priv in omap8250_runtime_suspend()
as it has not yet been registered if probe fails. And we need to use
pm_runtime_put_sync() to properly idle the device like we already do
in omap8250_remove().

Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-usb-hs: Add depends on EXTCON

commit 1a09b6a7c10e22c489a8b212dd6862b1fd9674ad upstream.

We get the following compile errors if EXTCON is enabled as a
module but this driver is builtin:

drivers/built-in.o: In function `qcom_usb_hs_phy_power_off':
phy-qcom-usb-hs.c:(.text+0x1089): undefined reference to `extcon_unregister_notifier'
drivers/built-in.o: In function `qcom_usb_hs_phy_probe':
phy-qcom-usb-hs.c:(.text+0x11b5): undefined reference to `extcon_get_edev_by_phandle'
drivers/built-in.o: In function `qcom_usb_hs_phy_power_on':
phy-qcom-usb-hs.c:(.text+0x128e): undefined reference to `extcon_get_state'
phy-qcom-usb-hs.c:(.text+0x12a9): undefined reference to `extcon_register_notifier'

so let's mark this as needing to follow the modular status of
the extcon framework.

Fixes: 9994a33865f4 e2427b09ba929c2b9 (phy: Add support for Qualcomm's USB HS phy")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_edgeport: fix descriptor error handling

commit 3c0e25d883d06a1fbd1ad35257e8abaa57befb37 upstream.

Make sure to detect short control-message transfers and log an error
when reading incomplete manufacturer and boot descriptors.

Note that the default all-zero descriptors will now be used after a
short transfer is detected instead of partially initialised ones.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mct_u232: fix modem-status error handling

commit 36356a669eddb32917fc4b5c2b9b8bf80ede69de upstream.

Make sure to detect short control-message transfers so that errors are
logged when reading the modem status at open.

Note that while this also avoids initialising the modem status using
uninitialised heap data, these bits could not leak to user space as they
are currently not used.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: quatech2: fix control-message error handling

commit 8c34cb8ddfe808d557b51da983ff10c02793beb2 upstream.

Make sure to detect short control-message transfers when fetching
modem and line state in open and when retrieving registers.

This specifically makes sure that an errno is returned to user space on
errors in TIOCMGET instead of a zero bitmask.

Also drop the unused getdevice function which also lacked appropriate
error handling.

Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: fix latency-timer error handling

commit e3e574ad85a208cb179f33720bb5f12b453de33c upstream.

Make sure to detect short responses when reading the latency timer to
avoid using stale buffer data.

Note that no heap data would currently leak through sysfs as
ASYNC_LOW_LATENCY is set by default.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ark3116: fix open error handling

commit b631433b175f1002a31020e09bbfc2e5caecf290 upstream.

Fix open error handling which failed to detect errors when reading the
MSR and LSR registers, something which could lead to the shadow
registers being initialised from errnos.

Note that calling the generic close implementation is sufficient in the
error paths as the interrupt urb has not yet been submitted and the
register updates have not been made.

Fixes: f4c1e8d597d1 ("USB: ark3116: Make existing functions 16450-aware
and add close and release functions.")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ti_usb_3410_5052: fix control-message error handling

commit 39712e8bfa8d3aa6ce1e60fc9d62c9b076c17a30 upstream.

Make sure to detect and return an error on zero-length control-message
transfers when reading from the device.

This addresses a potential failure to detect an empty transmit buffer
during close.

Also remove a redundant check for short transfer when sending a command.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_edgeport: fix epic-descriptor handling

commit e4457d9798adb96272468e93da663de9bd0a4198 upstream.

Use a dedicated buffer for the DMA transfer and make sure to detect
short transfers to avoid parsing a corrupt descriptor.

Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ssu100: fix control-message error handling

commit 1eac5c244f705182d1552a53e2f74e2775ed95d6 upstream.

Make sure to detect short control-message transfers rather than continue
with zero-initialised data when retrieving modem status and during
device initialisation.

Fixes: 52af95459939 ("USB: add USB serial ssu100 driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: digi_acceleport: fix incomplete rx sanity check

commit 1b0aed2b1600f6e5c7b9acfbd610a4e351ef5232 upstream.

Make sure the received data has the required headers before parsing it.

Also drop the redundant urb-status check, which has already been handled
by the caller.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: keyspan_pda: fix receive sanity checks

commit c528fcb116e61afc379a2e0a0f70906b937f1e2c upstream.

Make sure to check for short transfers before parsing the receive buffer
to avoid acting on stale data.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: Handle extcon events properly

commit a89b94b53371bbfa582787c2fa3378000ea4263d upstream.

We're currently emulating the vbus and id interrupts in the OTGSC
read API, but we also need to make sure that if we're handling
the events with extcon that we don't enable the interrupts for
those events in the hardware. Therefore, properly emulate this
register if we're using extcon, but don't enable the interrupts.
This allows me to get my cable connect/disconnect working
properly without getting spurious interrupts on my device that
uses an extcon for these two events.

Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com>
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: Only read/write OTGSC from one place

commit f60f8ccd54e03c1afafb2b20ceb029a0eaf7a134 upstream.

With the id and vbus detection done via extcon we need to make
sure we poll the status of OTGSC properly by considering what the
extcon is saying, and not just what the register is saying. Let's
move this hw_wait_reg() function to the only place it's used and
simplify it for polling the OTGSC register. Then we can make
certain we only use the hw_read_otgsc() API to read OTGSC, which
will make sure we properly handle extcon events.

Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com>
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ohci-exynos: Decrese node refcount on exynos_ehci_get_phy() error paths

commit 68bd6fc3cfa98ef253e17307ccafd8ef907b5556 upstream.

Returning from for_each_available_child_of_node() loop requires cleaning
up node refcount. Error paths lacked it so for example in case of
deferred probe, the refcount of phy node was left increased.

Fixes: 6d40500ac9b6 ("usb: ehci/ohci-exynos: Fix of_node_put() for child when getting PHYs")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ehci-exynos: Decrese node refcount on exynos_ehci_get_phy() error paths

commit 3f6026b1dcb3c8ee71198c485a72ac674c6890dd upstream.

Returning from for_each_available_child_of_node() loop requires cleaning
up node refcount. Error paths lacked it so for example in case of
deferred probe, the refcount of phy node was left increased.

Fixes: 6d40500ac9b6 ("usb: ehci/ohci-exynos: Fix of_node_put() for child when getting PHYs")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: do not leak PML full vmexit to L1

commit ab007cc94ff9d82f5a8db8363b3becbd946e58cf upstream.

The PML feature is not exposed to guests so we should not be forwarding
the vmexit either.

This commit fixes BSOD 0x20001 (HYPERVISOR_ERROR) when running Hyper-V
enabled Windows Server 2016 in L1 on hardware that supports PML.

Fixes: 843e4330573c ("KVM: VMX: Add PML support in VMX")
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: initialize PML fields in vmcs02

commit 1fb883bb827ee8efc1cc9ea0154f953f8a219d38 upstream.

L2 was running with uninitialized PML fields which led to incomplete
dirty bitmap logging. This manifested as all kinds of subtle erratic
behavior of the nested guest.

Fixes: 843e4330573c ("KVM: VMX: Add PML support in VMX")
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "KVM: nested VMX: disable perf cpuid reporting"

commit 0b4c208d443ba2af82b4c70f99ca8df31e9a0020 upstream.

This reverts commit bc6134942dbbf31c25e9bd7c876be5da81c9e1ce.

A CPUID instruction executed in VMX non-root mode always causes a
VM-exit, regardless of the leaf being queried.

Fixes: bc6134942dbb ("KVM: nested VMX: disable perf cpuid reporting")
Signed-off-by: Jim Mattson <jmattson@google.com>
[The issue solved by bc6134942dbb has been resolved with ff651cb613b4
("KVM: nVMX: Add nested msr load/restore algorithm").]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/platform/intel-mid: Correct MSI IRQ line for watchdog device

commit 80354c29025833acd72ddac1ffa21c6cb50128cd upstream.

The interrupt line used for the watchdog is 12, according to the official
Intel Edison BSP code.

And indeed after fixing it we start getting an interrupt and thus the
watchdog starts working again:

[ 191.699951] Kernel panic - not syncing: Kernel Watchdog

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 78a3bb9e408b ("x86: intel-mid: add watchdog platform code for Merrifield")
Link: http://lkml.kernel.org/r/20170312150744.45493-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes/x86: Fix kernel panic when certain exception-handling addresses are probed

commit 75013fb16f8484898eaa8d0b08fed942d790f029 upstream.

Fix to the exception table entry check by using probed address
instead of the address of copied instruction.

This bug may cause unexpected kernel panic if user probe an address
where an exception can happen which should be fixup by __ex_table
(e.g. copy_from_user.)

Unless user puts a kprobe on such address, this doesn't
cause any problem.

This bug has been introduced years ago, by commit:

464846888d9a ("x86/kprobes: Fix a bug which can modify kernel code permanently").

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 464846888d9a ("x86/kprobes: Fix a bug which can modify kernel code permanently")
Link: http://lkml.kernel.org/r/148829899399.28855.12581062400757221722.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: Make x86/ conditional on CONFIG_COMMON_CLK

commit f35b6542c3ac3f28056d298348a81f7d56d3a041 upstream.

Fix Makefile for x86 support, dependency on CONFIG_COMMON_CLK
was not explicit

Fixes: 701190fd7419 ('clk: x86: add support for Lynxpoint LPSS clocks')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pci-calgary: Fix iommu_free() comparison of unsigned expression >= 0

commit 68dee8e2f2cacc54d038394e70d22411dee89da2 upstream.

commit 8fd524b355da ("x86: Kill bad_dma_address variable") has killed
bad_dma_address variable and used instead of macro DMA_ERROR_CODE
which is always zero. Since dma_addr is unsigned, the statement

dma_addr >= DMA_ERROR_CODE

is always true, and not needed.

arch/x86/kernel/pci-calgary_64.c: In function ‘iommu_free’:
arch/x86/kernel/pci-calgary_64.c:299:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
if (unlikely((dma_addr >= DMA_ERROR_CODE) && (dma_addr < badend))) {

Fixes: 8fd524b355da ("x86: Kill bad_dma_address variable")
Signed-off-by: Nikola Pajkovsky <npajkovsky@suse.cz>
Cc: iommu@lists.linux-foundation.org
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Link: http://lkml.kernel.org/r/7612c0f9dd7c1290407dbf8e809def922006920b.1479161177.git.npajkovsky@suse.cz
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/ioapic: Restore IO-APIC irq_chip retrigger callback

commit a9b4f08770b415f30f2fb0f8329a370c8f554aa3 upstream.

commit d32932d02e18 removed the irq_retrigger callback from the IO-APIC
chip and did not add it to the new IO-APIC-IR irq chip.

There is no harm because the interrupts are resent in software when the
retrigger callback is NULL, but it's less efficient. So restore them.

[ tglx: Massaged changelog ]

Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces")
Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com>
Cc: xe-linux-external@cisco.com
Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: Avoid skipping WEP key deletion for AP

commit a5b60de6972decc6b50a39abb376077c3c3621c8 upstream.

This patch fixes the issue specific to AP. AP is started with WEP
security and external station is connected to it. Data path works
in this case. Now if AP is restarted with WPA/WPA2 security,
station is able to connect but ping fails.

Driver skips the deletion of WEP keys if interface type is AP.
Removing that redundant check resolves the issue.

Fixes: e57f1734d87a ("mwifiex: add key material v2 support")
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: remove redundant dma padding in AMSDU

commit 5f0a221f59ad6b72202ef9c6e232086de8c336f2 upstream.

We already ensure 64 bytes alignment and add padding if required
during skb_aggr allocation.

Alignment and padding in mwifiex_11n_form_amsdu_txpd() is redundant.
We may end up accessing more data than allocated size with this.

This patch fixes following issue by removing redundant padding.

[  370.241338] skbuff: skb_over_panic: text:ffffffffc046946a len:3550
put:72 head:ffff880000110000 data:ffff8800001100e4 tail:0xec2 end:0xec0 dev:<NULL>
[  370.241374] ------------[ cut here ]------------
[  370.241382] kernel BUG at net/core/skbuff.c:104!
  370.244032] Call Trace:
[  370.244041]  [<ffffffff8c3df5ec>] skb_put+0x44/0x45
[  370.244055]  [<ffffffffc046946a>]
mwifiex_11n_aggregate_pkt+0x1e9/0xa50 [mwifiex]
[  370.244067]  [<ffffffffc0467c16>] mwifiex_wmm_process_tx+0x44a/0x6b7
[mwifiex]
[  370.244074]  [<ffffffffc0411eb8>] ? 0xffffffffc0411eb8
[  370.244084]  [<ffffffffc046116b>] mwifiex_main_process+0x476/0x5a5
[mwifiex]
[  370.244098]  [<ffffffffc0461298>] mwifiex_main_process+0x5a3/0x5a5
[mwifiex]
[  370.244113]  [<ffffffff8be7e9ff>] process_one_work+0x1a4/0x309
[  370.244123]  [<ffffffff8be7f4ca>] worker_thread+0x20c/0x2ee
[  370.244130]  [<ffffffff8be7f2be>] ? rescuer_thread+0x383/0x383
[  370.244136]  [<ffffffff8be7f2be>] ? rescuer_thread+0x383/0x383
[  370.244143]  [<ffffffff8be83742>] kthread+0x11c/0x124
[  370.244150]  [<ffffffff8be83626>] ? kthread_parkme+0x24/0x24
[  370.244157]  [<ffffffff8c4da1ef>] ret_from_fork+0x3f/0x70
[  370.244168]  [<ffffffff8be83626>] ? kthread_parkme+0x24/0x24

Fixes: 84b313b35f8158d ("mwifiex: make tx packet 64 byte DMA aligned")
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: debugfs: Fix (sometimes) off-by-1 SSID print

commit 6183468a23fc6b6903f8597982017ad2c7fdefcf upstream.

Similar to commit fcd2042e8d36 ("mwifiex: printk() overflow with 32-byte
SSIDs"), we failed to account for the existence of 32-char SSIDs in our
debugfs code. Unlike in that case though, we zeroed out the containing
struct first, and I'm pretty sure we're guaranteed to have some padding
after the 'ssid.ssid' and 'ssid.ssid_len' fields (the struct is 33 bytes
long).

So, this is the difference between:

  # cat /sys/kernel/debug/mwifiex/mlan0/info
  ...
  essid="0123456789abcdef0123456789abcdef "
  ...

and the correct output:

  # cat /sys/kernel/debug/mwifiex/mlan0/info
  ...
  essid="0123456789abcdef0123456789abcdef"
  ...

Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP5 / DRA7: Fix HYP mode boot for thumb2 build

commit 448c077eeb02240c430db2a2c3bf5285a4c65d66 upstream.

'adr' yields a data-pointer, not a function-pointer.

Fixes: 999f934de195 ("ARM: omap5/dra7xx: Enable booting secondary
CPU in HYP mode")
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

leds: ktd2692: avoid harmless maybe-uninitialized warning

commit cbe99c538d1776009e8710755bb6e726f7fffa9b upstream.

gcc gets confused about the control flow in ktd2692_parse_dt(), causing
it to warn about what seems like a potential bug:

drivers/leds/leds-ktd2692.c: In function 'ktd2692_probe':
drivers/leds/leds-ktd2692.c:244:15: error: '*((void *)&led_cfg+8)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/leds/leds-ktd2692.c:225:7: error: 'led_cfg.flash_max_microamp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/leds/leds-ktd2692.c:232:3: error: 'led_cfg.movie_max_microamp' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The code is fine, and slightly reworking it in an equivalent way lets
gcc figure that out too, which gets rid of the warning.

Fixes: 77e7915b15bb ("leds: ktd2692: Add missing of_node_put")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Handle fault before status on interrupt

commit ba52e75718784fda1b683ee0bfded72a0b83b047 upstream.

Reading both fault and status registers and logging any fault should
take priority over handling status register update.

Fix by moving the status handling to later in interrupt routine.

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread()

commit 68abfb8015832ddf728b911769659468efaf8bd9 upstream.

Caching the fault register after a single I2C read may not keep an accurate
value.

Fix by doing two reads in irq_handle_thread() and using the cached value
elsewhere. If a safety timer fault later clears itself, we apparently don't get
an interrupt (INT), however other interrupts would refresh the register cache.

From the data sheet: "When a fault occurs, the charger device sends out INT
and keeps the fault state in REG09 until the host reads the fault register.
Before the host reads REG09 and all the faults are cleared, the charger
device would not send any INT upon new faults. In order to read the
current fault status, the host has to read REG09 two times consecutively.
The 1st reads fault register status from the last read [1] and the 2nd reads
the current fault register status."

[1] presumably a typo; should be "last fault"

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Call power_supply_changed() for relevant component

commit 2d9fee6a42ea170e4378b3363a7ad385d0e67281 upstream.

We wrongly get uevents for bq24190-charger and bq24190-battery on every
register change.

Fix by checking the association with charger and battery before
emitting uevent(s).

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Install irq_handler_thread() at end of probe()

commit d62acc5ef0621463446091ebd7a345e06e9ab80c upstream.

The device specific data is not fully initialized on
request_threaded_irq(). This may cause a crash when the IRQ handler
tries to reference them.

Fix the issue by installing IRQ handler at the end of the probe.

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Call set_mode_host() on pm_resume()

commit e05ad7e0741ce0505e1df157c62b22b95172bb97 upstream.

pm_resume() does a register_reset() which clears charger host mode.

Fix by calling set_mode_host() after the reset.

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING

commit 767eee362fd72bb2ca44cc80419ca4b38c6d8369 upstream.

The interrupt signal is TRIGGER_FALLING. This is is specified in the
data sheet PIN FUNCTIONS: "The INT pin sends active low, 256us
pulse to host to report charger device status and fault."

Also the direction can be seen in the data sheet Figure 37 "BQ24190
with D+/D- Detection and USB On-The-Go (OTG)" which shows a 10k
pull-up resistor installed for the sample configurations.

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv: Fix opal_exit tracepoint opcode

commit a7e0fb6c2029a780444d09560f739e020d54fe4d upstream.

Currently the opal_exit tracepoint usually shows the opcode as 0:

  <idle>-0     [047] d.h.   635.654292: opal_entry: opcode=63
  <idle>-0     [047] d.h.   635.654296: opal_exit: opcode=0 retval=0
  kopald-1209  [019] d...   636.420943: opal_entry: opcode=10
  kopald-1209  [019] d...   636.420959: opal_exit: opcode=0 retval=0

This is because we incorrectly load the opcode into r0 before calling
__trace_opal_exit(), whereas it expects the opcode in r3 (first function
parameter). In fact we are leaving the retval in r3, so opcode and
retval will always show the same value.

Instead load the opcode into r3, resulting in:

  <idle>-0     [040] d.h.   636.618625: opal_entry: opcode=63
  <idle>-0     [040] d.h.   636.618627: opal_exit: opcode=63 retval=0

Fixes: c49f63530bb6 ("powernv: Add OPAL tracepoints")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpupower: Fix turbo frequency reporting for pre-Sandy Bridge cores

commit 4cca0457686e4ee1677d69469e4ddfd94d389a80 upstream.

The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and
CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both
flags set and an assumed base clock of 100 MHz for turbo values.

Reported-by: GSR <gsr.bugs@infernal-iceberg.com>
Tested-by: GSR <gsr.bugs@infernal-iceberg.com>
References: https://bugs.debian.org/859978
Fixes: 8fb2e440b223 (cpupower: Show Intel turbo ratio support via ...)
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode

commit 5008efc83bf85b647aa1cbc44718b1675bbb7444 upstream.

The PJ4 inline asm sequence to write to cp15 cannot be built in Thumb-2
mode, due to the way it performs arithmetic on the program counter, so it
is built in ARM mode instead. However, building C files in ARM mode under
CONFIG_THUMB2_KERNEL is problematic, since the instrumentation performed
by subsystems like ftrace does not expect having to deal with interworking
branches.

Since the sequence in question is simply a poor man's ISB instruction,
let's use a straight 'isb' instead when building in Thumb2 mode. Thumb2
implies V7, so 'isb' should always be supported in that case.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p: fix a potential acl leak

commit b5c66bab72a6a65edb15beb60b90d3cb84c5763b upstream.

posix_acl_update_mode() could possibly clear 'acl', if so we leak the
memory pointed by 'acl'. Save this pointer before calling
posix_acl_update_mode() and release the memory if 'acl' really gets
cleared.

Link: http://lkml.kernel.org/r/1486678332-2430-1-git-send-email-xiyou.wangcong@gmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: Mark Salyzyn <salyzyn@android.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kurz <groug@kaod.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm ioctl: prevent stack leak in dm ioctl call

commit 4617f564c06117c7d1b611be49521a4430042287 upstream.

When calling a dm ioctl that doesn't process any data
(IOCTL_FLAGS_NO_PARAMS), the contents of the data field in struct
dm_ioctl are left initialized. Current code is incorrectly extending
the size of data copied back to user, causing the contents of kernel
stack to be leaked to user. Fix by only copying contents before data
and allow the functions processing the ioctl to override.

Signed-off-by: Adrian Salido <salidoa@google.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: stricter decoding of write-like NFSv2/v3 ops

commit 13bf9fbff0e5e099e2b6f003a0ab8ae145436309 upstream.

The NFSv2/v3 code does not systematically check whether we decode past
the end of the buffer. This generally appears to be harmless, but there
are a few places where we do arithmetic on the pointers involved and
don't account for the possibility that a length could be negative. Add
checks to catch these.

Reported-by: Tuomas Haanpää <thaan@synopsys.com>
Reported-by: Ari Kauppi <ari@synopsys.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: minor NFSv2/v3 write decoding cleanup

commit db44bac41bbfc0c0d9dd943092d8bded3c9db19b upstream.

Use a couple shortcuts that will simplify a following bugfix.

(Minor backporting required to account for a change from f34b95689d2c
"The NFSv2/NFSv3 server does not handle zero length WRITE requests
correctly".)

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4/fscrypto: avoid RCU lookup in d_revalidate

commit 03a8bb0e53d9562276045bdfcf2b5de2e4cff5a1 upstream.

As Al pointed, d_revalidate should return RCU lookup before using d_inode.
This was originally introduced by:
commit 34286d666230 ("fs: rcu-walk aware d_revalidate method").

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4 crypto: use dget_parent() in ext4_d_revalidate()

commit 3d43bcfef5f0548845a425365011c499875491b0 upstream.

This avoids potential problems caused by a race where the inode gets
renamed out from its parent directory and the parent directory is
deleted while ext4_d_revalidate() is running.

Fixes: 28b4c263961c
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4 crypto: revalidate dentry after adding or removing the key

commit 28b4c263961c47da84ed8b5be0b5116bad1133eb upstream.

Add a validation check for dentries for encrypted directory to make
sure we're not caching stale data after a key has been added or removed.

Also check to make sure that status of the encryption key is updated
when readdir(2) is executed.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: require encryption feature for EXT4_IOC_SET_ENCRYPTION_POLICY

commit 9a200d075e5d05be1fcad4547a0f8aee4e2f9a04 upstream.

...otherwise an user can enable encryption for certain files even
when the filesystem is unable to support it.
Such a case would be a filesystem created by mkfs.ext4's default
settings, 1KiB block size. Ext4 supports encyption only when block size
is equal to PAGE_SIZE.
But this constraint is only checked when the encryption feature flag
is set.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ehca: fix maybe-uninitialized warnings

The driver causes two warnings about possibly uninitialized variables:

drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf':
drivers/infiniband/hw/ehca/ehca_mrmw.c:1908:4: warning: 'prev_pgaddr' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/infiniband/hw/ehca/ehca_mrmw.c:1924:14: note: 'prev_pgaddr' was declared here
drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_reg_mr':
drivers/infiniband/hw/ehca/ehca_mrmw.c:2430:5: warning: 'hret' may be used uninitialized in this function [-Wmaybe-uninitialized]

The first one is definitely a false positive, the second one may or may not
be one. In both cases, adding an intialization is the safe and easy
workaround.

The driver was removed in mainline in commit e581d111dad3
("staging/rdma: remove deprecated ehca driver"), in linux-4.6.
In 4.4, the file is located in drivers/staging/rdma/ehca/ehca_mrmw.c,
and the fix still applies.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/qib: rename BITS_PER_PAGE to RVT_BITS_PER_PAGE

We get this build warning on arm64

drivers/infiniband/hw/qib/qib_qp.c:44:0: error: "BITS_PER_PAGE" redefined [-Werror]
#define BITS_PER_PAGE (PAGE_SIZE*BITS_PER_BYTE)

This is fixed upstream in commit 898fa52b4ac3 ("IB/qib: Remove qpn, qp tables and
related variables from qib"), which does a lot of other things as well.

Instead, I just backport the rename of the local BITS_PER_PAGE definition to
RVT_BITS_PER_PAGE.

The driver first showed up in linux-2.6.35, and the fixup should still apply
to that. The upstream fix went into v4.6, so we could apply this workaround
to both 3.18 and 4.4.

Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: Allow direct reclaim for fallback allocation

The backport of d35c99ff77ec ("netlink: do not enter direct reclaim from
netlink_dump()") to the 4.4 branch (first in 4.4.32) mistakenly removed
direct claim from the initial large allocation _and_ the fallback
allocation which means that allocations can spuriously fail.
Fix the issue by adding back the direct reclaim flag to the fallback
allocation.

Fixes: 6d123f1d396b ("netlink: do not enter direct reclaim from netlink_dump()")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

8250_pci: Fix potential use-after-free in error path

commit c130b666a9a711f985a0a44b58699ebe14bb7245 upstream.

Commit f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during
PCI error recovery") introduces a potential use-after-free in case the
pciserial_init_ports call in serial8250_io_resume fails, which may
happen if a memory allocation fails or if the .init quirk failed for
whatever reason). If this happen, further pci_get_drvdata will return a
pointer to freed memory.

This patch reworks the PCI recovery resume hook to restore the old priv
structure in this case, which should be ok, since the ports were already
detached. Such error during recovery causes us to give up on the
recovery.

Fixes: f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during PCI error recovery")
Reported-by: Michal Suchanek <msuchanek@suse.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: cxlflash: Improve EEH recovery time

commit 05dab43230fdc0d14ca885b473a2740fe017ecb1 upstream.

When an EEH occurs during device initialization, the port timeout logic
can cause excessive delays as MMIO reads will fail. Depending on where
they are experienced, these delays can lead to a prolonged reset,
causing an unnecessary triggering of other timeout logic in the SCSI
stack or user applications.

To expedite recovery, the port timeout logic is updated to decay the
timeout at a much faster rate when in the presence of a likely EEH
frozen event.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: cxlflash: Fix to avoid EEH and host reset collisions

commit 1d3324c382b1a617eb567e3650dcb51f22dfec9a upstream.

The EEH reset handler is ignorant to the current state of the driver
when processing a frozen event and initiating a device reset. This can
be an issue if an EEH event occurs while a user or stack initiated reset
is executing. More specifically, if an EEH occurs while the SCSI host
reset handler is active, the reset initiated by the EEH thread will
likely collide with the host reset thread. This can leave the device in
an inconsistent state, or worse, cause a system crash.

As a remedy, the EEH handler is updated to evaluate the device state and
take appropriate action (proceed, wait, or disconnect host). The host
reset handler is also updated to handle situations where an EEH occurred
during a host reset. In such situations, the host reset handler will
delay reporting back a success to give the EEH reset an opportunity to
complete.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: cxlflash: Scan host only after the port is ready for I/O

commit bbbfae962b7c221237c0f92547ee0c83f7204747 upstream.

When a port link is established, the AFU sends a 'link up' interrupt.
After the link is up, corresponding initialization steps are performed
on the card. Following that, when the card is ready for I/O, the AFU
sends 'login succeeded' interrupt. Today, cxlflash invokes
scsi_scan_host() upon receipt of both interrupts.

SCSI commands sent to the port prior to the 'login succeeded' interrupt
will fail with 'port not available' error. This is not desirable.
Moreover, when async_scan is active for the host, subsequent scan calls
are terminated with error. Due to this, the scsi_scan_host() call
performed after 'login succeeded' interrupt could portentially return
error and the devices may not be scanned properly.

To avoid this problem, scsi_scan_host() should be called only after the
'login succeeded' interrupt.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: tg3: avoid uninitialized variable warning

commit e434e04110704eb91acfecbd0fb8ca8e2da9c29b upstream.

The tg3_set_eeprom() function correctly initializes the 'start' variable,
but gcc generates a false warning:

drivers/net/ethernet/broadcom/tg3.c: In function 'tg3_set_eeprom':
drivers/net/ethernet/broadcom/tg3.c:12057:4: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]

I have not come up with a way to restructure the code in a way that
avoids the warning without making it less readable, so this adds an
initialization for the declaration to shut up that warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: avoid stack overflow in MTD CFI code

commit fddcca5107051adf9e4481d2a79ae0616577fd2c upstream.

When map_word gets too large, we use a lot of kernel stack, and for
MTD_MAP_BANK_WIDTH_32, this means we use more than the recommended
1024 bytes in a number of functions:

drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers':
drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1336 bytes is larger than 1024 bytes [-Wframe-larger-than=]
drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_erase_varsize':
drivers/mtd/chips/cfi_cmdset_0020.c:972:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=]
drivers/mtd/chips/cfi_cmdset_0001.c: In function 'do_write_buffer':
drivers/mtd/chips/cfi_cmdset_0001.c:1835:1: warning: the frame size of 1240 bytes is larger than 1024 bytes [-Wframe-larger-than=]

This can be avoided if all operations on the map word are done
indirectly and the stack gets reused between the calls. We can
mostly achieve this by selecting MTD_COMPLEX_MAPPINGS whenever
MTD_MAP_BANK_WIDTH_32 is set, but for the case that no other
bank width is enabled, we also need to use a non-constant
map_bankwidth() to convince the compiler to use less stack.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Brian: this patch mostly achieves its goal by forcing
    MTD_COMPLEX_MAPPINGS (and the accompanying indirection) for 256-bit
    mappings; the rest of the change is mostly a wash, though it helps
    reduce stack size slightly. If we really care about supporting
    256-bit mappings though, we should consider rewriting some of this
    code to avoid keeping and assigning so many 256-bit objects on the
    stack.]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drbd: avoid redefinition of BITS_PER_PAGE

commit 2630628b2dbc3fc320aafaf84836119e4e3d62f1 upstream.

Apparently we now implicitly get definitions for BITS_PER_PAGE and
BITS_PER_PAGE_MASK from the pid_namespace.h

Instead of renaming our defines, I chose to define only if not yet
defined, but to double check the value if already defined.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ppc/awacs: shut up maybe-uninitialized warning

commit b268c34e5ee92a4cc3099b0caaf26e6bfbdf0f18 upstream.

The awacs sound driver produces a false-positive warning in ppc64_defconfig:

sound/ppc/awacs.c: In function 'snd_pmac_awacs_init':
include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized]

I haven't come up with a good way to rewrite the code to avoid the
warning, so here is a bad one: I initialize the variable before
the conditionall initialization so gcc no longer has to worry about
it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: intel: Fix PM and non-atomic crash in bytcr drivers

commit 6e4cac23c5a648d50b107d1b53e9c4e1120c7943 upstream.

The FE setups of Intel SST bytcr_rt5640 and bytcr_rt5651 drivers carry
the ignore_suspend flag, and this prevents the suspend/resume working
properly while the stream is running, since SST core code has the
check of the running streams and returns -EBUSY.  Drop these
superfluous flags for fixing the behavior.

Also, the bytcr_rt5640 driver lacks of nonatomic flag in some FE
definitions, which leads to the kernel Oops at suspend/resume like:

  BUG: scheduling while atomic: systemd-sleep/3144/0x00000003
  Call Trace:
   dump_stack+0x5c/0x7a
   __schedule_bug+0x55/0x70
   __schedule+0x63c/0x8c0
   schedule+0x3d/0x90
   schedule_timeout+0x16b/0x320
   ? del_timer_sync+0x50/0x50
   ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core]
   ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core]
   ? remove_wait_queue+0x60/0x60
   ? sst_prepare_and_post_msg+0x275/0x960 [snd_intel_sst_core]
   ? sst_pause_stream+0x9b/0x110 [snd_intel_sst_core]
   ....

This patch addresses these appropriately, too.

[tiwai: applied only to bytcr_rt5640 as bytcr_rt5651 isn't present in
4.4.x yet]

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Handle mismatched open calls

commit 38bd49064a1ecb67baad33598e3d824448ab11ec upstream.

A signal can interrupt a SendReceive call which result in incoming
responses to the call being ignored. This is a problem for calls such as
open which results in the successful response being ignored. This
results in an open file resource on the server.

The patch looks into responses which were cancelled after being sent and
in case of successful open closes the open fids.

For this patch, the check is only done in SendReceive2()

RH-bz: 1403319

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timerfd: Protect the might cancel mechanism proper

commit 1e38da300e1e395a15048b0af1e5305bd91402f6 upstream.

The handling of the might_cancel queueing is not properly protected, so
parallel operations on the file descriptor can race with each other and
lead to list corruptions or use after free.

Protect the context for these operations with a seperate lock.

The wait queue lock cannot be reused for this because that would create a
lock inversion scenario vs. the cancel lock. Replacing might_cancel with an
atomic (atomic_t or atomic bit) does not help either because it still can
race vs. the actual list operation.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "linux-fsdevel@vger.kernel.org"
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701311521430.3457@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram

commit 34a477e5297cbaa6ecc6e17c042a866e1cbe80d6 upstream.

On x86-32, with CONFIG_FIRMWARE and multiple CPUs, if you enable function
graph tracing and then suspend to RAM, it will triple fault and reboot when
it resumes.

The first fault happens when booting a secondary CPU:

startup_32_smp()
  load_ucode_ap()
    prepare_ftrace_return()
      ftrace_graph_is_dead()
        (accesses 'kill_ftrace_graph')

The early head_32.S code calls into load_ucode_ap(), which has an an
ftrace hook, so it calls prepare_ftrace_return(), which calls
ftrace_graph_is_dead(), which tries to access the global
'kill_ftrace_graph' variable with a virtual address, causing a fault
because the CPU is still in real mode.

The fix is to add a check in prepare_ftrace_return() to make sure it's
running in protected mode before continuing.  The check makes sure the
stack pointer is a virtual kernel address.  It's a bit of a hack, but
it's not very intrusive and it works well enough.

For reference, here are a few other (more difficult) ways this could
have potentially been fixed:

- Move startup_32_smp()'s call to load_ucode_ap() down to *after* paging
  is enabled.  (No idea what that would break.)

- Track down load_ucode_ap()'s entire callee tree and mark all the
  functions 'notrace'.  (Probably not realistic.)

- Pause graph tracing in ftrace_suspend_notifier_call() or bringup_cpu()
  or __cpu_up(), and ensure that the pause facility can be queried from
  real mode.

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>
Cc: linux-acpi@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/5c1272269a580660703ed2eccf44308e790c7a98.1492123841.git.jpoimboe@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>