OSDN Git Service
Paul Zimmerman [Wed, 20 May 2020 23:53:43 +0000 (16:53 -0700)]
raspi: add BCM2835 SOC MPHI emulation
Add BCM2835 SOC MPHI (Message-based Parallel Host Interface)
emulation. It is very basic, only providing the FIQ interrupt
needed to allow the dwc-otg USB host controller driver in the
Raspbian kernel to function.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
20200520235349.21215-2-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Tue, 2 Jun 2020 13:50:50 +0000 (15:50 +0200)]
docs/system: Document Aspeed boards
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20200602135050.593692-1-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Mon, 25 May 2020 14:12:37 +0000 (16:12 +0200)]
tests/acceptance: Add a boot test for the xlnx-versal-virt machine
As described by Edgar here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg605124.html
we can use the Ubuntu kernel for testing the xlnx-versal-virt machine.
So let's add a boot test for this now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
20200525141237.15243-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Wed, 3 Jun 2020 05:59:15 +0000 (07:59 +0200)]
hw/adc/stm32f2xx_adc: Correct memory region size and access size
The ADC region size is 256B, split as:
- [0x00 - 0x4f] defined
- [0x50 - 0xff] reserved
All registers are 32-bit (thus when the datasheet mentions the
last defined register is 0x4c, it means its address range is
0x4c .. 0x4f.
This model implementation is also 32-bit. Set MemoryRegionOps
'impl' fields.
See:
'RM0033 Reference manual Rev 8', Table 10.13.18 "ADC register map".
Reported-by: Seth Kintigh <skintigh@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20200603055915.17678-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 14 May 2020 21:28:31 +0000 (14:28 -0700)]
target/arm: Split helper_crypto_sm3tt
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200514212831.31248-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 14 May 2020 21:28:30 +0000 (14:28 -0700)]
target/arm: Split helper_crypto_sha1_3reg
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200514212831.31248-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 14 May 2020 21:28:29 +0000 (14:28 -0700)]
target/arm: Convert sha1 and sha256 to gvec helpers
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200514212831.31248-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 14 May 2020 21:28:28 +0000 (14:28 -0700)]
target/arm: Convert sha512 and sm3 to gvec helpers
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200514212831.31248-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 14 May 2020 21:28:27 +0000 (14:28 -0700)]
target/arm: Convert rax1 to gvec helpers
With this conversion, we will be able to use the same helpers
with sve. This also fixes a bug in which we failed to clear
the high bits of the SVE register after an AdvSIMD operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200514212831.31248-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Thu, 14 May 2020 21:28:26 +0000 (14:28 -0700)]
target/arm: Convert aes and sm4 to gvec helpers
With this conversion, we will be able to use the same helpers
with sve. In particular, pass 3 vector parameters for the
3-operand operations; for advsimd the destination register
is also an input.
This also fixes a bug in which we failed to clear the high bits
of the SVE register after an AdvSIMD operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200514212831.31248-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Tue, 2 Jun 2020 12:44:35 +0000 (13:44 +0100)]
hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()
Replace printf() calls by qemu_log_mask(), which is disabled
by default. This avoid flooding the terminal when fuzzing the
device.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20200525114123.21317-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Tue, 2 Jun 2020 12:44:34 +0000 (13:44 +0100)]
hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask()
hw_error() calls exit(). This a bit overkill when we can log
the accesses as unimplemented or guest error.
When fuzzing the devices, we don't want the whole process to
exit. Replace some hw_error() calls by qemu_log_mask()
(missed in commit
5a0001ec7e).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20200525114123.21317-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eden Mikitas [Tue, 2 Jun 2020 12:44:34 +0000 (13:44 +0100)]
hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave
When inserting the value retrieved (rx) from the spi slave, rx is pushed to
rx_fifo after being cast to uint8_t. rx_fifo is a fifo32, and the rx
register the driver uses is also 32 bit. This zeroes the 24 most
significant bits of rx. This proved problematic with devices that expect to
use the whole 32 bits of the rx register.
Signed-off-by: Eden Mikitas <e.mikitas@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eden Mikitas [Tue, 2 Jun 2020 12:44:34 +0000 (13:44 +0100)]
hw/ssi/imx_spi: changed while statement to prevent underflow
The while statement in question only checked if tx_burst is not 0.
tx_burst is a signed int, which is assigned the value put by the
guest driver in ECSPI_CONREG. The burst length can be anywhere
between 1 and 4096, and since tx_burst is always decremented by 8
it could possibly underflow, causing an infinite loop.
Signed-off-by: Eden Mikitas <e.mikitas@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 5 Jun 2020 12:53:05 +0000 (13:53 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/vga-
20200605-pull-request' into staging
vga: ati security fix, cirrus cleanup.
# gpg: Signature made Fri 05 Jun 2020 12:27:13 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/vga-
20200605-pull-request:
hw/display/cirrus_vga: Fix code mis-indentation
ati-vga: check mm_index before recursive call (CVE-2020-13800)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 5 Jun 2020 10:53:37 +0000 (11:53 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
# gpg: Signature made Fri 05 Jun 2020 10:47:27 BST
# gpg: using RSA key
8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
block: Factor out bdrv_run_co()
exec: Rename qemu_ram_writeback() as qemu_ram_msync()
hw/block: Let the NVMe emulated device be target-agnostic
memory: Extract memory_region_msync() from memory_region_writeback()
memory: Rename memory_region_do_writeback -> memory_region_writeback
fuzz: run the main-loop in fork-server process
fuzz: add mangled object name to linker script
fuzz: fix typo in i440fx-qtest-reboot arguments
fuzz: add datadir for oss-fuzz compatability
io_uring: use io_uring_cq_ready() to check for ready cqes
io_uring: retry io_uring_submit() if it fails with errno=EINTR
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Vladimir Sementsov-Ogievskiy [Wed, 20 May 2020 14:49:01 +0000 (17:49 +0300)]
block: Factor out bdrv_run_co()
We have a few bdrv_*() functions that can either spawn a new coroutine
and wait for it with BDRV_POLL_WHILE() or use a fastpath if they are
alreeady running in a coroutine. All of them duplicate basically the
same code.
Factor the common code into a new function bdrv_run_co().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id:
20200520144901.16589-1-vsementsov@virtuozzo.com
[Factor out bdrv_run_co_entry too]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Philippe Mathieu-Daudé [Fri, 8 May 2020 06:24:56 +0000 (08:24 +0200)]
exec: Rename qemu_ram_writeback() as qemu_ram_msync()
Rename qemu_ram_writeback() as qemu_ram_msync() to better
match what it does.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
20200508062456.23344-5-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Philippe Mathieu-Daudé [Fri, 8 May 2020 06:24:55 +0000 (08:24 +0200)]
hw/block: Let the NVMe emulated device be target-agnostic
Now than the non-target specific memory_region_msync() function
is available, use it to make this device target-agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
20200508062456.23344-4-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Philippe Mathieu-Daudé [Fri, 8 May 2020 06:24:54 +0000 (08:24 +0200)]
memory: Extract memory_region_msync() from memory_region_writeback()
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
20200508062456.23344-3-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Philippe Mathieu-Daudé [Fri, 8 May 2020 06:24:53 +0000 (08:24 +0200)]
memory: Rename memory_region_do_writeback -> memory_region_writeback
We usually use '_do_' for internal functions. Rename
memory_region_do_writeback() as memory_region_writeback().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
20200508062456.23344-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alexander Bulekov [Tue, 12 May 2020 03:01:33 +0000 (23:01 -0400)]
fuzz: run the main-loop in fork-server process
Without this, the time since the last main-loop keeps increasing, as the
fuzzer runs. The forked children need to handle all the "past-due"
timers, slowing them down, over time. With this change, the
parent/fork-server process runs the main-loop, while waiting on the
child, ensuring that the timer events do not pile up, over time.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id:
20200512030133.29896-5-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alexander Bulekov [Tue, 12 May 2020 03:01:32 +0000 (23:01 -0400)]
fuzz: add mangled object name to linker script
Previously, we relied on "FuzzerTracePC*(.bss*)" to place libfuzzer's
fuzzer::TPC object into our contiguous shared-memory region. This does
not work for some libfuzzer builds, so this addition identifies the
region by its mangled name: *(.bss._ZN6fuzzer3TPCE);
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id:
20200512030133.29896-4-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alexander Bulekov [Tue, 12 May 2020 03:01:31 +0000 (23:01 -0400)]
fuzz: fix typo in i440fx-qtest-reboot arguments
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20200512030133.29896-3-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alexander Bulekov [Tue, 12 May 2020 03:01:30 +0000 (23:01 -0400)]
fuzz: add datadir for oss-fuzz compatability
This allows us to keep pc-bios in executable_dir/pc-bios, rather than
executable_dir/../pc-bios, which is incompatible with oss-fuzz' file
structure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id:
20200512030133.29896-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefano Garzarella [Tue, 19 May 2020 13:49:42 +0000 (15:49 +0200)]
io_uring: use io_uring_cq_ready() to check for ready cqes
In qemu_luring_poll_cb() we are not using the cqe peeked from the
CQ ring. We are using io_uring_peek_cqe() only to see if there
are cqes ready, so we can replace it with io_uring_cq_ready().
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id:
20200519134942.118178-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefano Garzarella [Tue, 19 May 2020 13:30:41 +0000 (15:30 +0200)]
io_uring: retry io_uring_submit() if it fails with errno=EINTR
As recently documented [1], io_uring_enter(2) syscall can return an
error (errno=EINTR) if the operation was interrupted by a delivery
of a signal before it could complete.
This should happen when IORING_ENTER_GETEVENTS flag is used, for
example during io_uring_submit_and_wait() or during io_uring_submit()
when IORING_SETUP_IOPOLL is enabled.
We shouldn't have this problem for now, but it's better to prevent it.
[1] https://github.com/axboe/liburing/commit/
344355ec6619de8f4e64584c9736530b5346e4f4
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id:
20200519133041.112138-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Philippe Mathieu-Daudé [Fri, 29 May 2020 16:54:36 +0000 (18:54 +0200)]
hw/display/cirrus_vga: Fix code mis-indentation
While replacing fprintf() by qemu_log_mask() in commit
2b55f4d3504, we incorrectly used a 'tab = 4 spaces'
alignment, leading to misindented new code. Fix now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20200529165436.23573-1-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Prasad J Pandit [Thu, 4 Jun 2020 09:08:30 +0000 (14:38 +0530)]
ati-vga: check mm_index before recursive call (CVE-2020-13800)
While accessing VGA registers via ati_mm_read/write routines,
a guest may set 's->regs.mm_index' such that it leads to infinite
recursion. Check mm_index value to avoid such recursion. Log an
error message for wrong values.
Reported-by: Ren Ding <rding@gatech.edu>
Reported-by: Hanqing Zhao <hanqing@gatech.edu>
Reported-by: Yi Ren <c4tren@gmail.com>
Message-id:
20200604090830.33885-1-ppandit@redhat.com
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Maydell [Thu, 4 Jun 2020 10:38:47 +0000 (11:38 +0100)]
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-
20200603' into staging
This is a collection of RISC-V patches for 5.1.
This incldues removing deprecated features and part of the OpenTitan
support series.
# gpg: Signature made Wed 03 Jun 2020 17:12:43 BST
# gpg: using RSA key
F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-
20200603:
riscv: Initial commit of OpenTitan machine
target/riscv: Add the lowRISC Ibex CPU
target/riscv: Don't set PMP feature in the cpu init
target/riscv: Disable the MMU correctly
target/riscv: Don't overwrite the reset vector
riscv/boot: Add a missing header include
riscv: sifive_e: Manually define the machine
docs: deprecated: Update the -bios documentation
target/riscv: Drop support for ISA spec version 1.09.1
target/riscv: Remove the deprecated CPUs
hw/riscv: spike: Remove deprecated ISA specific machines
hw/riscv: virt: Remove the riscv_ prefix of the machine* functions
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions
riscv: Change the default behavior if no -bios option is specified
riscv: Suppress the error report for QEMU testing with riscv_find_firmware()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis [Thu, 23 Apr 2020 18:30:50 +0000 (11:30 -0700)]
riscv: Initial commit of OpenTitan machine
This adds a barebone OpenTitan machine to QEMU.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Alistair Francis [Thu, 23 Apr 2020 17:50:09 +0000 (10:50 -0700)]
target/riscv: Add the lowRISC Ibex CPU
Ibex is a small and efficient, 32-bit, in-order RISC-V core with
a 2-stage pipeline that implements the RV32IMC instruction set
architecture.
For more details on lowRISC see here:
https://github.com/lowRISC/ibex
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Alistair Francis [Thu, 28 May 2020 18:04:15 +0000 (11:04 -0700)]
target/riscv: Don't set PMP feature in the cpu init
The PMP is enabled by default via the "pmp" property so there is no need
for us to set it in the init function. As all CPUs have PMP support just
remove the set_feature() call in the CPU init functions.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Alistair Francis [Tue, 26 May 2020 23:06:02 +0000 (16:06 -0700)]
target/riscv: Disable the MMU correctly
Previously if we didn't enable the MMU it would be enabled in the
realize() function anyway. Let's ensure that if we don't want the MMU we
disable it. We also don't need to enable the MMU as it will be enabled
in realize() by default.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Alistair Francis [Tue, 19 May 2020 18:04:12 +0000 (11:04 -0700)]
target/riscv: Don't overwrite the reset vector
The reset vector is set in the init function don't set it again in
realize.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Alistair Francis [Thu, 23 Apr 2020 21:09:37 +0000 (14:09 -0700)]
riscv/boot: Add a missing header include
As the functions declared in this header use the symbol_fn_t
typedef itself declared in "hw/loader.h", we need to include
it here to make the header file self-contained.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Alistair Francis [Wed, 13 May 2020 17:37:08 +0000 (10:37 -0700)]
riscv: sifive_e: Manually define the machine
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Alistair Francis [Thu, 28 May 2020 17:55:13 +0000 (10:55 -0700)]
docs: deprecated: Update the -bios documentation
Update the -bios deprecation documentation to describe the new
behaviour.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Alistair Francis [Tue, 5 May 2020 20:04:50 +0000 (13:04 -0700)]
target/riscv: Drop support for ISA spec version 1.09.1
The RISC-V ISA spec version 1.09.1 has been deprecated in QEMU since
4.1. It's not commonly used so let's remove support for it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Alistair Francis [Wed, 6 May 2020 20:03:25 +0000 (13:03 -0700)]
target/riscv: Remove the deprecated CPUs
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Alistair Francis [Tue, 5 May 2020 20:07:24 +0000 (13:07 -0700)]
hw/riscv: spike: Remove deprecated ISA specific machines
The ISA specific Spike machines have been deprecated in QEMU since 4.1,
let's finally remove them.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Bin Meng [Thu, 21 May 2020 14:42:27 +0000 (07:42 -0700)]
hw/riscv: virt: Remove the riscv_ prefix of the machine* functions
Remove the riscv_ prefix of the machine* functions.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1590072147-13035-2-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1590072147-13035-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Thu, 21 May 2020 14:42:26 +0000 (07:42 -0700)]
hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions
To keep consistency with the machine* functions, remove the riscv_
prefix of the soc* functions.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1590072147-13035-1-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1590072147-13035-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Fri, 1 May 2020 12:19:05 +0000 (05:19 -0700)]
riscv: Change the default behavior if no -bios option is specified
Per QEMU deprecated doc, QEMU 4.1 introduced support for the -bios
option in QEMU for RISC-V for the virt machine and sifive_u machine.
The default behavior has been that QEMU does not automatically load
any firmware if no -bios option is included.
Now 2 releases passed, it's time to change the default behavior to
load the default OpenSBI firmware automatically. The firmware is
included with the QEMU release and no user interaction is required.
All a user needs to do is specify the kernel they want to boot with
the -kernel option.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id:
1588335545-649-1-git-send-email-bmeng.cn@gmail.com
Message-Id: <
1588335545-649-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Bin Meng [Fri, 1 May 2020 15:50:54 +0000 (08:50 -0700)]
riscv: Suppress the error report for QEMU testing with riscv_find_firmware()
We only ship plain binary bios images in the QEMU source. With Spike
machine that uses ELF images as the default bios, running QEMU test
will complain hence let's suppress the error report for QEMU testing.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Message-Id: <
1588348254-7241-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Peter Maydell [Tue, 2 Jun 2020 17:16:38 +0000 (18:16 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-
20200602' into staging
Vector rotate support
Signal handling support for NetBSD arm/aarch64
# gpg: Signature made Tue 02 Jun 2020 17:43:05 BST
# gpg: using RSA key
7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-
20200602:
accel/tcg: Provide a NetBSD specific aarch64 cpu_signal_handler
accel/tcg: Adjust cpu_signal_handler for NetBSD/arm
tcg: Improve move ops in liveness_pass_2
target/s390x: Use tcg_gen_gvec_rotl{i,s,v}
target/ppc: Use tcg_gen_gvec_rotlv
tcg/ppc: Implement INDEX_op_rot[lr]v_vec
tcg/aarch64: Implement INDEX_op_rotl{i,v}_vec
tcg/i386: Implement INDEX_op_rotl{i,s,v}_vec
tcg: Implement gvec support for rotate by scalar
tcg: Remove expansion to shift by vector from do_shifts
tcg: Implement gvec support for rotate by vector
tcg: Implement gvec support for rotate by immediate
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nick Hudson [Sun, 17 May 2020 10:15:29 +0000 (11:15 +0100)]
accel/tcg: Provide a NetBSD specific aarch64 cpu_signal_handler
Fix qemu build on NetBSD/evbarm-aarch64 by providing a NetBSD specific
cpu_signal_handler.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Message-Id: <
20200517101529.5367-1-skrll@netbsd.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Nick Hudson [Sat, 16 May 2020 15:41:47 +0000 (16:41 +0100)]
accel/tcg: Adjust cpu_signal_handler for NetBSD/arm
Fix building on NetBSD/arm by extracting the FSR value from the
correct siginfo_t field.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Message-Id: <
20200516154147.24842-1-skrll@netbsd.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Thu, 23 Apr 2020 19:27:53 +0000 (12:27 -0700)]
tcg: Improve move ops in liveness_pass_2
If the output of the move is dead, then the last use is in
the store. If we propagate the input to the store, then we
can remove the move opcode entirely.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 20 Apr 2020 16:50:54 +0000 (09:50 -0700)]
target/s390x: Use tcg_gen_gvec_rotl{i,s,v}
Merge VERLL and VERLLV into op_vesv and op_ves, alongside
all of the other vector shift operations.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 20 Apr 2020 04:54:56 +0000 (21:54 -0700)]
target/ppc: Use tcg_gen_gvec_rotlv
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 20 Apr 2020 03:46:12 +0000 (03:46 +0000)]
tcg/ppc: Implement INDEX_op_rot[lr]v_vec
We already had support for rotlv, using a target-specific opcode;
convert to use the generic opcode. Handle rotrv via simple negation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 20 Apr 2020 04:03:09 +0000 (04:03 +0000)]
tcg/aarch64: Implement INDEX_op_rotl{i,v}_vec
For immediate rotate , we can implement this in two instructions,
using SLI. For variable rotate, the oddness of aarch64 right-shift-
as-negative-left-shift means a backend-specific expansion works best.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 20 Apr 2020 02:14:51 +0000 (19:14 -0700)]
tcg/i386: Implement INDEX_op_rotl{i,s,v}_vec
For immediates, we must continue the special casing of 8-bit
elements. The other element sizes and shift types are trivially
implemented with shifts.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 20 Apr 2020 15:22:44 +0000 (08:22 -0700)]
tcg: Implement gvec support for rotate by scalar
No host backend support yet, but the interfaces for rotls
are in place. Only implement left-rotate for now, as the
only known use of vector rotate by scalar is s390x, so any
right-rotate would be unused and untestable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 20 Apr 2020 14:56:36 +0000 (07:56 -0700)]
tcg: Remove expansion to shift by vector from do_shifts
We do not reflect this expansion in tcg_can_emit_vecop_list,
so it is unused and unusable. However, we actually perform
the same expansion in do_gvec_shifts, so it is also unneeded.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 20 Apr 2020 02:47:59 +0000 (19:47 -0700)]
tcg: Implement gvec support for rotate by vector
No host backend support yet, but the interfaces for rotlv
and rotrv are in place.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Drop the generic expansion from rot to shift; we can do better
for each backend, and then this code becomes unused.
Richard Henderson [Mon, 20 Apr 2020 01:01:52 +0000 (18:01 -0700)]
tcg: Implement gvec support for rotate by immediate
No host backend support yet, but the interfaces for rotli
are in place. Canonicalize immediate rotate to the left,
based on a survey of architectures, but provide both left
and right shift interfaces to the translators.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 2 Jun 2020 15:25:26 +0000 (16:25 +0100)]
Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-5.1-pull-request' into staging
Two fixes for the 68040 FPU
# gpg: Signature made Tue 02 Jun 2020 16:21:19 BST
# gpg: using RSA key
CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier/tags/m68k-for-5.1-pull-request:
target/m68k: implement opcode fetoxm1
target/m68k: implement fmove.l #<data>,FPCR
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Laurent Vivier [Sun, 31 May 2020 13:19:51 +0000 (15:19 +0200)]
target/m68k: implement opcode fetoxm1
Example provided in the launchpad bug fails with:
qemu: uncaught target signal 4 (Illegal instruction) - core dumped
Illegal instruction (core dumped)
It appears fetoxm1 is not implemented:
IN: expm1f
0x800005cc: fetoxm1x %fp2,%fp0
Disassembler disagrees with translator over instruction decoding
Please report this to qemu-devel@nongnu.org
(gdb) x/2hx 0x800005cc
0x800005cc: 0xf200 0x0808
This patch adds the instruction.
Bug: https://bugs.launchpad.net/qemu/+bug/
1881450
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20200531131951.631902-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Laurent Vivier [Sun, 31 May 2020 11:02:31 +0000 (13:02 +0200)]
target/m68k: implement fmove.l #<data>,FPCR
The immediate value mode was ignored and instruction execution
ends to an invalid access mode.
This was found running 'R' that set FPSR to 0 at startup with
a 'fmove.l #0,FPSR' in qemu-system-m68k emulation and triggers a
kernel crash:
[ 56.640000] *** ADDRESS ERROR *** FORMAT=2
[ 56.640000] Current process id is 728
[ 56.640000] BAD KERNEL TRAP:
00000000
[ 56.640000] Modules linked in: sg evdev mac_hid ip_tables x_tables sha1_generic hmac ipv6 nf_defrag_ipv6 autofs4 ext4 crc16 mbcache jbd2 crc32c_generic sd_mod t10_pi crc_t10dif crct10dif_generic crct10dif_common sr_mod cdrom mac_esp macsonic esp_scsi
[ 56.640000] PC: [<
00016a2c>] X_UNSUPP+0x2c/0x3c
[ 56.640000] SR: 2004 SP:
3eb5e68c a2:
c02e239a
[ 56.640000] d0:
00000040 d1:
00000002 d2:
8002adec d3:
8002ad50
[ 56.640000] d4:
8002c768 d5:
0000000d a0:
ffffffc2 a1:
ffffffc1
[ 56.640000] Process R (pid: 728, task=
a3dfda5d)
[ 56.640000] Frame format=2 instr addr=
00000000
[ 56.650000] Stack from
3a4d9f30:
[ 56.650000]
41000000 00000002 00000002 ffffffc2 ffffffc1 1fff0000 80000000 00000000
[ 56.650000]
3fbf0000 80000000 00000000 00000000 20000000 00000000 7fff0000 ffffffff
[ 56.650000]
ffffffff 00000000 00050008 00000000 8000067c c02c2000 efffee20 000002d8
[ 56.650000]
00002a28 3a4d9f98 00000002 00000014 fffffffe 8002c768 00000002 00000041
[ 56.650000]
00000002 c041fc58 c0743758 ffffffff 00000000 0008c075 00002b24 00000012
[ 56.650000]
000007d0 00000024 00000002 c05bef04 c05bef04 0000005e 00000077 c28aca70
[ 56.650000] Call Trace: [<
00050008>] copy_overflow+0x10/0x28
[ 56.650000] [<
00002a28>] buserr+0x20/0x28
[ 56.650000] [<
0008c075>] bpf_check+0x57f/0x1cfa
[ 56.650000] [<
00002b24>] syscall+0x8/0xc
[ 56.650000] [<
0000c019>] dn_sched_init+0x75/0x88
[ 56.650000] Code: 1017 0200 00f0 0c00 0040 66ff 0000 05ac <f23c> 8800 0000 0000 f23c 9000 0000 0000 222e ff84 082e 0005 ff1c 6600 000a 0281
[ 56.650000] Disabling lock debugging due to kernel taint
...
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20200531110231.620711-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Peter Maydell [Tue, 2 Jun 2020 09:25:55 +0000 (10:25 +0100)]
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
machine queue, 2020-05-13
Bug fixes:
* hostmem: don't use mbind() if host-nodes is empty (Igor Mammedov)
# gpg: Signature made Wed 13 May 2020 15:00:25 BST
# gpg: using RSA key
5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
hostmem: don't use mbind() if host-nodes is empty
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 1 Jun 2020 20:34:47 +0000 (21:34 +0100)]
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-
20200601a' into staging
Migration/virtio/hmp pull 2020-06-01
A mixed pull with:
- RDMA migration fix (CID
1428762)
- HMP qom-get addition and qom-set cleanup
- a virtiofsd fix
- COLO fixes
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 01 Jun 2020 19:37:15 BST
# gpg: using RSA key
45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-
20200601a:
migration/migration.c: Fix hang in ram_save_host_page
migration/colo.c: Move colo_notify_compares_event to the right place
migration/colo.c: Relaunch failover even if there was an error
migration/colo.c: Flush ram cache only after receiving device state
migration/colo.c: Use cpu_synchronize_all_states()
migration/colo.c: Use event instead of semaphore
migration/vmstate: Remove unnecessary MemoryRegion forward declaration
virtiofsd: remove symlink fallbacks
hmp: Simplify qom-set
hmp: Implement qom-get HMP command
migration/rdma: cleanup rdma context before g_free to avoid memleaks
migration/rdma: fix potential nullptr access in rdma_start_incoming_migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 1 Jun 2020 18:19:18 +0000 (19:19 +0100)]
Merge remote-tracking branch 'remotes/bkoppelmann2/tags/pull-tricore-
20200601' into staging
Remove ctx->env ptr, add TriCore gdb stub
# gpg: Signature made Mon 01 Jun 2020 16:06:35 BST
# gpg: using RSA key
6E636A7E83F2DD0CFA6E6E370AD2C6396B69CA14
# gpg: issuer "kbastian@mail.uni-paderborn.de"
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" [full]
# Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E 6E37 0AD2 C639 6B69 CA14
* remotes/bkoppelmann2/tags/pull-tricore-
20200601:
target/tricore: Implement gdbstub
target/tricore: Implement tricore_cpu_get_phys_page_debug
target/tricore: Raise EXCP_DEBUG in gen_goto_tb() for singlestep
target/tricore: Move translate feature check to ctx
target/tricore: Don't save pc in generate_qemu_excp
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Lukas Straub [Wed, 20 May 2020 20:42:32 +0000 (22:42 +0200)]
migration/migration.c: Fix hang in ram_save_host_page
migration_rate_limit will erroneously ratelimit a shutdown socket,
which causes the migration thread to hang in ram_save_host_page
if the socket is shutdown.
Fix this by explicitly testing if the socket has errors or was
shutdown in migration_rate_limit.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <
e79085bbe2d46dfa007dd41820194d5e2d4fcd80.
1590007004.git.lukasstraub2@web.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Lukas Straub [Mon, 11 May 2020 11:11:01 +0000 (13:11 +0200)]
migration/colo.c: Move colo_notify_compares_event to the right place
If the secondary has to failover during checkpointing, it still is
in the old state (i.e. different state than primary). Thus we can't
expose the primary state until after the checkpoint is sent.
This fixes sporadic connection reset of client connections during
failover.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <
d4555dd5146a54518c4d9d4efd996b7c745c6687.
1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Lukas Straub [Mon, 11 May 2020 11:10:55 +0000 (13:10 +0200)]
migration/colo.c: Relaunch failover even if there was an error
If vmstate_loading is true, secondary_vm_do_failover will set failover
status to FAILOVER_STATUS_RELAUNCH and return success without initiating
failover. However, if there is an error during the vmstate_loading
section, failover isn't relaunched. Instead we then wait for
failover on colo_incoming_sem.
Fix this by relaunching failover even if there was an error. Also,
to make this work properly, set vmstate_loading to false when
returning during the vmstate_loading section.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <
f60b0a8e2fadaaec792e04819dfc46951842d6ba.
1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Lukas Straub [Mon, 11 May 2020 11:10:51 +0000 (13:10 +0200)]
migration/colo.c: Flush ram cache only after receiving device state
If we suceed in receiving ram state, but fail receiving the device
state, there will be a mismatch between the two.
Fix this by flushing the ram cache only after the vmstate has been
received.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <
3289d007d494cb0e2f05b1cf4ae6a78d300fede3.
1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Lukas Straub [Mon, 11 May 2020 11:10:48 +0000 (13:10 +0200)]
migration/colo.c: Use cpu_synchronize_all_states()
cpu_synchronize_all_pre_loadvm() marks all vcpus as dirty, so the
registers are loaded from CPUState before we continue running
the vm. However if we failover during checkpoint, CPUState is not
initialized and the registers are loaded with garbage. This causes
guest hangs and crashes.
Fix this by using cpu_synchronize_all_states(), which initializes
CPUState from the current cpu registers additionally to marking
the vcpus as dirty.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <
9675031ce557b73ebd10e7bd20ebbf57f30b177c.
1589193382.git.lukasstraub2@web.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Lukas Straub [Mon, 11 May 2020 11:10:44 +0000 (13:10 +0200)]
migration/colo.c: Use event instead of semaphore
If multiple packets miscompare in a short timeframe, the semaphore
value will be increased multiple times. This causes multiple
checkpoints even if one would be sufficient.
Fix this by using a event instead of a semaphore for triggering
checkpoints. Now, checkpoint requests will be ignored until the
checkpoint event is sent to colo-compare (which releases the
miscompared packets).
Benchmark results (iperf3):
Client-to-server tcp:
without patch: ~66 Mbit/s
with patch: ~61 Mbit/s
Server-to-client tcp:
without patch: ~702 Kbit/s
with patch: ~16 Mbit/s
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <
fd601ba1beb524aada54ba66e87ebfc12cf4574b.
1589193382.git.lukasstraub2@web.de>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Philippe Mathieu-Daudé [Sat, 30 May 2020 16:55:12 +0000 (18:55 +0200)]
migration/vmstate: Remove unnecessary MemoryRegion forward declaration
"migration/vmstate.h" only uses pointer to MemoryRegion, which
is already forward declared in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20200530165512.15225-1-f4bug@amsat.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Miklos Szeredi [Thu, 14 May 2020 14:07:36 +0000 (16:07 +0200)]
virtiofsd: remove symlink fallbacks
Path lookup in the kernel has special rules for looking up magic symlinks
under /proc. If a filesystem operation is instructed to follow symlinks
(e.g. via AT_SYMLINK_FOLLOW or lack of AT_SYMLINK_NOFOLLOW), and the final
component is such a proc symlink, then the target of the magic symlink is
used for the operation, even if the target itself is a symlink. I.e. path
lookup is always terminated after following a final magic symlink.
I was erronously assuming that in the above case the target symlink would
also be followed, and so workarounds were added for a couple of operations
to handle the symlink case. Since the symlink can be handled simply by
following the proc symlink, these workardouds are not needed.
Also remove the "norace" option, which disabled the workarounds.
Commit
bdfd66788349 ("virtiofsd: Fix xattr operations") already dealt with
the same issue for xattr operations.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Message-Id: <
20200514140736.20561-1-mszeredi@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Wed, 20 May 2020 15:11:08 +0000 (16:11 +0100)]
hmp: Simplify qom-set
Simplify qom_set by making it use qmp_qom_set and the JSON parser.
(qemu) qom-get /machine smm
"auto"
(qemu) qom-set /machine smm "auto"
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20200520151108.160598-3-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With 's'->'S' type change suggested by Paolo and Markus
Dr. David Alan Gilbert [Wed, 20 May 2020 15:11:07 +0000 (16:11 +0100)]
hmp: Implement qom-get HMP command
This started off as Andreas Färber's implementation from
March 2015, but after feedback from Paolo and Markus it morphed into
using the json output which handles structs reasonably.
Use with qom-list to find the members of an object.
(qemu) qom-get /backend/console[0]/device/vga.rom[0] size
65536
(qemu) qom-get /machine smm
"auto"
(qemu) qom-get /machine rtc-time
{
"tm_year": 120,
"tm_sec": 51,
"tm_hour": 9,
"tm_min": 50,
"tm_mon": 4,
"tm_mday": 20
}
(qemu) qom-get /machine frob
Error: Property '.frob' not found
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20200520151108.160598-2-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Pan Nengyuan [Fri, 8 May 2020 10:07:55 +0000 (06:07 -0400)]
migration/rdma: cleanup rdma context before g_free to avoid memleaks
When error happen in initializing 'rdma_return_path', we should cleanup rdma context
before g_free(rdma) to avoid some memleaks. This patch fix that.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <
20200508100755.7875-3-pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Pan Nengyuan [Fri, 8 May 2020 10:07:54 +0000 (06:07 -0400)]
migration/rdma: fix potential nullptr access in rdma_start_incoming_migration
'rdma' is NULL when taking the first error branch in rdma_start_incoming_migration.
And it will cause a null pointer access in label 'err'. Fix that.
Fixes:
59c59c67ee6b0327ae932deb303caa47919aeb1e
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <
20200508100755.7875-2-pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Note this is CID
1428762
Bastian Koppelmann [Fri, 29 May 2020 07:21:48 +0000 (09:21 +0200)]
target/tricore: Implement gdbstub
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <
20200529072148.284037-6-kbastian@mail.uni-paderborn.de>
Bastian Koppelmann [Fri, 29 May 2020 07:21:47 +0000 (09:21 +0200)]
target/tricore: Implement tricore_cpu_get_phys_page_debug
this also removes tricore_cpu_get_phys_page_attrs_debug() as it was a
temporary fix from
b190f477e29c7cd03a8fee49c96d27f160e3f5b0.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <
20200529072148.284037-5-kbastian@mail.uni-paderborn.de>
Bastian Koppelmann [Fri, 29 May 2020 07:21:46 +0000 (09:21 +0200)]
target/tricore: Raise EXCP_DEBUG in gen_goto_tb() for singlestep
this is needed for remote gdb connections.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <
20200529072148.284037-4-kbastian@mail.uni-paderborn.de>
Bastian Koppelmann [Fri, 29 May 2020 07:21:45 +0000 (09:21 +0200)]
target/tricore: Move translate feature check to ctx
this allows us to remove the references to env from ctx. This also fixes
a segfault that was due to the unititalized ctx->env ptr.
Reported-by: Andreas Konopik <andreas.konopik@fau.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <
20200529072148.284037-3-kbastian@mail.uni-paderborn.de>
Bastian Koppelmann [Fri, 29 May 2020 07:21:44 +0000 (09:21 +0200)]
target/tricore: Don't save pc in generate_qemu_excp
EXCP_DEBUG is the only user. If we encounter a jump in tricore-gdb it's
target was overwritten by generate_qemu_excp() and we would never leave.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <
20200529072148.284037-2-kbastian@mail.uni-paderborn.de>
Peter Maydell [Mon, 1 Jun 2020 12:43:59 +0000 (13:43 +0100)]
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-june-01-2020' into staging
MIPS queue for June 1st, 2020
# gpg: Signature made Mon 01 Jun 2020 12:29:25 BST
# gpg: using RSA key
D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [full]
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-june-01-2020:
hw/mips: fuloong2e: Set preferred page size to 16KB
target/mips: Support variable page size
target/mips: Add more CP0 register for save/restore
hw/mips: Add CPU IRQ3 delivery for KVM
configure: Add KVM target support for MIPS64
tests/Makefile: Fix description of "make check"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Huacai Chen [Wed, 8 Apr 2020 09:16:19 +0000 (17:16 +0800)]
hw/mips: fuloong2e: Set preferred page size to 16KB
Loongson processor prefers 16KB page size in system emulator, so let's
define mc->minimum_page_bits to 14.
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <
1586337380-25217-2-git-send-email-chenhc@lemote.com>
Huacai Chen [Wed, 8 Apr 2020 09:16:18 +0000 (17:16 +0800)]
target/mips: Support variable page size
Traditionally, MIPS use 4KB page size, but Loongson prefer 16KB page
size in system emulator. So, let's define TARGET_PAGE_BITS_VARY and
TARGET_PAGE_BITS_MIN to support variable page size.
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <
1586337380-25217-1-git-send-email-chenhc@lemote.com>
Huacai Chen [Sun, 3 May 2020 10:20:19 +0000 (18:20 +0800)]
target/mips: Add more CP0 register for save/restore
Add more CP0 register for save/restore, including: EBase, XContext,
PageGrain, PWBase, PWSize, PWField, PWCtl, Config*, KScratch1~KScratch6.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <
1588501221-1205-6-git-send-email-chenhc@lemote.com>
Huacai Chen [Sun, 3 May 2020 10:20:17 +0000 (18:20 +0800)]
hw/mips: Add CPU IRQ3 delivery for KVM
Currently, KVM/MIPS only deliver I/O interrupt via IP2, this patch add
IP3 delivery as well, because Loongson-3 based machine use both IRQ2
(CPU's IP2) and IRQ3 (CPU's IP3).
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <
1588501221-1205-4-git-send-email-chenhc@lemote.com>
Huacai Chen [Sun, 3 May 2020 10:20:15 +0000 (18:20 +0800)]
configure: Add KVM target support for MIPS64
Preparing for Loongson-3 virtualization, add KVM target support for
MIPS64 in configure script.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <
1588501221-1205-2-git-send-email-chenhc@lemote.com>
Huacai Chen [Tue, 5 May 2020 10:24:51 +0000 (18:24 +0800)]
tests/Makefile: Fix description of "make check"
The description of "make check" is out-of-date, so fix it by adding
block and softfloat.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <
1588674291-6486-1-git-send-email-chenhc@lemote.com>
Peter Maydell [Sun, 31 May 2020 20:49:07 +0000 (21:49 +0100)]
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/python-next-
20200531' into staging
Python queue:
* migration acceptance test fix
* introduce pylintrc & flake8 config
* various cleanups (Python3, style)
* vm-test can set QEMU_LOCAL=1 to use locally built binaries
* refactored BootLinuxBase & LinuxKernelTest acceptance classes
https://gitlab.com/philmd/qemu/pipelines/
151323210
https://travis-ci.org/github/philmd/qemu/builds/
693157969
# gpg: Signature made Sun 31 May 2020 17:37:35 BST
# gpg: using RSA key
FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/python-next-
20200531: (25 commits)
tests/acceptance: refactor boot_linux to allow code reuse
tests/acceptance: refactor boot_linux_console test to allow code reuse
tests/acceptance: allow console interaction with specific VMs
tests/acceptance/migration.py: Wait for both sides
tests/migration/guestperf: Use Python 3 interpreter
tests/vm: allow wait_ssh() to specify command
tests/vm: Add ability to select QEMU from current build
tests/vm: Pass --debug through for vm-boot-ssh
python/qemu/qtest: Check before accessing _qtest
python/qemu/qmp: assert sockfile is not None
python/qemu/qmp: use True/False for non/blocking modes
python/qemu: Adjust traceback typing
python/qemu: fix socket.makefile() typing
python/qemu: remove Python2 style super() calls
python/qemu: delint; add flake8 config
python/qemu: delint and add pylintrc
python/qemu/machine: remove logging configuration
python/qemu/machine: add kill() method
python: remove more instances of sys.version_info
scripts/qmp: Fix shebang and imports
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Sun, 31 May 2020 19:43:45 +0000 (20:43 +0100)]
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-05-30' into staging
- Replace hw_error() with qemu_log_mask() in the m68k coldfire machine code
# gpg: Signature made Sat 30 May 2020 08:44:41 BST
# gpg: using RSA key
27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "huth@tuxfamily.org"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-05-30:
hw/m68k/mcf52xx: Replace hw_error() by qemu_log_mask()
hw/m68k/mcf5206: Reduce m5206_mbar_read/write() offset arg to 16-bit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pavel Dovgalyuk [Fri, 29 May 2020 07:05:31 +0000 (10:05 +0300)]
tests/acceptance: refactor boot_linux to allow code reuse
This patch moves image downloading functions to the separate class to allow
reusing them from record/replay tests.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
159073593167.20809.
17582679291556188984.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Pavel Dovgalyuk [Fri, 29 May 2020 07:04:44 +0000 (10:04 +0300)]
tests/acceptance: refactor boot_linux_console test to allow code reuse
This patch splits code in BootLinuxConsole class into two different
classes to allow reusing it by record/replay tests.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
159073588490.20809.
13942096070255577558.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Pavel Dovgalyuk [Fri, 29 May 2020 07:04:39 +0000 (10:04 +0300)]
tests/acceptance: allow console interaction with specific VMs
Console interaction in avocado scripts was possible only with single
default VM.
This patch modifies the function parameters to allow passing a specific
VM as a parameter to interact with it.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
159073587933.20809.
5122618715976660635.stgit@pasha-ThinkPad-X280>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Dr. David Alan Gilbert [Thu, 28 May 2020 11:24:04 +0000 (12:24 +0100)]
tests/acceptance/migration.py: Wait for both sides
When the source finishes migration the destination will still be
receiving the data sent by the source, so it might not have quite
finished yet, so won't quite have reached 'completed'.
This lead to occasional asserts in the next few checks.
After the source has finished, check the destination as well.
(We can't just switch to checking the destination, because it doesn't
give a status until it has started receiving the migration).
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200528112404.121972-1-dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Philippe Mathieu-Daudé [Tue, 12 May 2020 10:32:38 +0000 (12:32 +0200)]
tests/migration/guestperf: Use Python 3 interpreter
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20200512103238.7078-7-philmd@redhat.com>
Robert Foley [Fri, 29 May 2020 20:34:52 +0000 (16:34 -0400)]
tests/vm: allow wait_ssh() to specify command
This allows for waiting for completion of arbitrary commands.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200529203458.1038-7-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Robert Foley [Fri, 29 May 2020 20:34:51 +0000 (16:34 -0400)]
tests/vm: Add ability to select QEMU from current build
Added a new special variable QEMU_LOCAL=1, which
will indicate to take the QEMU binary from the current
build.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200529203458.1038-6-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Robert Foley [Fri, 29 May 2020 20:34:50 +0000 (16:34 -0400)]
tests/vm: Pass --debug through for vm-boot-ssh
This helps debug issues that occur during the boot sequence.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200529203458.1038-5-robert.foley@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
John Snow [Thu, 14 May 2020 05:54:00 +0000 (01:54 -0400)]
python/qemu/qtest: Check before accessing _qtest
It can be None; so add assertions or exceptions where appropriate to
guard the access accordingly.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200514055403.18902-30-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
John Snow [Thu, 14 May 2020 05:53:51 +0000 (01:53 -0400)]
python/qemu/qmp: assert sockfile is not None
In truth, if you don't do this, you'll just get a TypeError
exception. Now, you'll get an AssertionError.
Is this tangibly better? No.
Does mypy complain less? Yes.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20200514055403.18902-21-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>