OSDN Git Service
Rolf Eike Beer [Fri, 13 May 2022 17:23:59 +0000 (19:23 +0200)]
net: tulip: convert to devres
Works fine on my HP C3600:
[ 274.452394] tulip0: no phy info, aborting mtable build
[ 274.499041] tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1
[ 274.750691] net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xf4008000, 00:30:6e:08:7d:21, IRQ 17
[ 283.104520] net eth0: Setting full-duplex based on MII#1 link partner capability of c1e1
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Bin [Fri, 13 May 2022 07:09:22 +0000 (15:09 +0800)]
net: hinic: add missing destroy_workqueue in hinic_pf_to_mgmt_init
hinic_pf_to_mgmt_init misses destroy_workqueue in error path,
this patch fixes that.
Fixes:
6dbb89014dc3 ("hinic: fix sending mailbox timeout in aeq event work")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 May 2022 09:47:44 +0000 (10:47 +0100)]
Merge branch 'skb-drop-reason-boundary'
Menglong Dong says:
====================
net: skb: check the boundrary of skb drop reason
In the commit
1330b6ef3313 ("skb: make drop reason booleanable"),
SKB_NOT_DROPPED_YET is added to the enum skb_drop_reason, which makes
the invalid drop reason SKB_NOT_DROPPED_YET can leak to the kfree_skb
tracepoint. Once this happen (it happened, as 4th patch says), it can
cause NULL pointer in drop monitor and result in kernel panic.
Therefore, check the boundrary of drop reason in both kfree_skb_reason
(2th patch) and drop monitor (1th patch) to prevent such case happens
again.
Meanwhile, fix the invalid drop reason passed to kfree_skb_reason() in
tcp_v4_rcv() and tcp_v6_rcv().
Changes since v2:
1/4 - don't reset the reason and print the debug warning only (Jakub
Kicinski)
4/4 - remove new lines between tags
Changes since v1:
- consider tcp_v6_rcv() in the 4th patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Fri, 13 May 2022 03:03:39 +0000 (11:03 +0800)]
net: tcp: reset 'drop_reason' to NOT_SPCIFIED in tcp_v{4,6}_rcv()
The 'drop_reason' that passed to kfree_skb_reason() in tcp_v4_rcv()
and tcp_v6_rcv() can be SKB_NOT_DROPPED_YET(0), as it is used as the
return value of tcp_inbound_md5_hash().
And it can panic the kernel with NULL pointer in
net_dm_packet_report_size() if the reason is 0, as drop_reasons[0]
is NULL.
Fixes:
1330b6ef3313 ("skb: make drop reason booleanable")
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Fri, 13 May 2022 03:03:38 +0000 (11:03 +0800)]
net: skb: change the definition SKB_DR_SET()
The SKB_DR_OR() is used to set the drop reason to a value when it is
not set or specified yet. SKB_NOT_DROPPED_YET should also be considered
as not set.
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Fri, 13 May 2022 03:03:37 +0000 (11:03 +0800)]
net: skb: check the boundrary of drop reason in kfree_skb_reason()
Sometimes, we may forget to reset skb drop reason to NOT_SPECIFIED after
we make it the return value of the functions with return type of enum
skb_drop_reason, such as tcp_inbound_md5_hash. Therefore, its value can
be SKB_NOT_DROPPED_YET(0), which is invalid for kfree_skb_reason().
So we check the range of drop reason in kfree_skb_reason() with
DEBUG_NET_WARN_ON_ONCE().
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Fri, 13 May 2022 03:03:36 +0000 (11:03 +0800)]
net: dm: check the boundary of skb drop reasons
The 'reason' will be set to 'SKB_DROP_REASON_NOT_SPECIFIED' if it not
small that SKB_DROP_REASON_MAX in net_dm_packet_trace_kfree_skb_hit(),
but it can't avoid it to be 0, which is invalid and can cause NULL
pointer in drop_reasons.
Therefore, reset it to SKB_DROP_REASON_NOT_SPECIFIED when 'reason <= 0'.
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangguan Wang [Fri, 13 May 2022 02:24:53 +0000 (10:24 +0800)]
net/smc: align the connect behaviour with TCP
Connect with O_NONBLOCK will not be completed immediately
and returns -EINPROGRESS. It is possible to use selector/poll
for completion by selecting the socket for writing. After select
indicates writability, a second connect function call will return
0 to indicate connected successfully as TCP does, but smc returns
-EISCONN. Use socket state for smc to indicate connect state, which
can help smc aligning the connect behaviour with TCP.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 May 2022 09:31:06 +0000 (10:31 +0100)]
Merge branch 'sk_bound_dev_if-annotations'
Eric Dumazet says:
====================
net: add annotations for sk->sk_bound_dev_if
While writes on sk->sk_bound_dev_if are protected by socket lock,
we have many lockless reads all over the places.
This is based on syzbot report found in the first patch changelog.
v2: inline ipv6 function only defined if IS_ENABLED(CONFIG_IPV6) (kernel bots)
Change the INET6_MATCH() to inet6_match(), this is no longer a macro.
Change INET_MATCH() to inet_match() (Olivier Hartkopp & Jakub Kicinski)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:55:50 +0000 (11:55 -0700)]
inet: rename INET_MATCH()
This is no longer a macro, but an inlined function.
INET_MATCH() -> inet_match()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Olivier Hartkopp <socketcan@hartkopp.net>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:55:49 +0000 (11:55 -0700)]
ipv6: add READ_ONCE(sk->sk_bound_dev_if) in INET6_MATCH()
INET6_MATCH() runs without holding a lock on the socket.
We probably need to annotate most reads.
This patch makes INET6_MATCH() an inline function
to ease our changes.
v2: inline function only defined if IS_ENABLED(CONFIG_IPV6)
Change the name to inet6_match(), this is no longer a macro.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:55:48 +0000 (11:55 -0700)]
l2tp: use add READ_ONCE() to fetch sk->sk_bound_dev_if
Use READ_ONCE() in paths not holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:55:47 +0000 (11:55 -0700)]
net_sched: em_meta: add READ_ONCE() in var_sk_bound_if()
sk->sk_bound_dev_if can change under us, use READ_ONCE() annotation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:55:46 +0000 (11:55 -0700)]
inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict()
inet_csk_bind_conflict() can access sk->sk_bound_dev_if for
unlocked sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:55:45 +0000 (11:55 -0700)]
dccp: use READ_ONCE() to read sk->sk_bound_dev_if
When reading listener sk->sk_bound_dev_if locklessly,
we must use READ_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:55:44 +0000 (11:55 -0700)]
net: core: add READ_ONCE/WRITE_ONCE annotations for sk->sk_bound_dev_if
sock_bindtoindex_locked() needs to use WRITE_ONCE(sk->sk_bound_dev_if, val),
because other cpus/threads might locklessly read this field.
sock_getbindtodevice(), sock_getsockopt() need READ_ONCE()
because they run without socket lock held.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:55:43 +0000 (11:55 -0700)]
tcp: sk->sk_bound_dev_if once in inet_request_bound_dev_if()
inet_request_bound_dev_if() reads sk->sk_bound_dev_if twice
while listener socket is not locked.
Another cpu could change this field under us.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:55:42 +0000 (11:55 -0700)]
sctp: read sk->sk_bound_dev_if once in sctp_rcv()
sctp_rcv() reads sk->sk_bound_dev_if twice while the socket
is not locked. Another cpu could change this field under us.
Fixes:
0fd9a65a76e8 ("[SCTP] Support SO_BINDTODEVICE socket option on incoming packets.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:55:41 +0000 (11:55 -0700)]
net: annotate races around sk->sk_bound_dev_if
UDP sendmsg() is lockless, and reads sk->sk_bound_dev_if while
this field can be changed by another thread.
Adds minimal annotations to avoid KCSAN splats for UDP.
Following patches will add more annotations to potential lockless readers.
BUG: KCSAN: data-race in __ip6_datagram_connect / udpv6_sendmsg
write to 0xffff888136d47a94 of 4 bytes by task 7681 on cpu 0:
__ip6_datagram_connect+0x6e2/0x930 net/ipv6/datagram.c:221
ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272
inet_dgram_connect+0x107/0x190 net/ipv4/af_inet.c:576
__sys_connect_file net/socket.c:1900 [inline]
__sys_connect+0x197/0x1b0 net/socket.c:1917
__do_sys_connect net/socket.c:1927 [inline]
__se_sys_connect net/socket.c:1924 [inline]
__x64_sys_connect+0x3d/0x50 net/socket.c:1924
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff888136d47a94 of 4 bytes by task 7670 on cpu 1:
udpv6_sendmsg+0xc60/0x16e0 net/ipv6/udp.c:1436
inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:652
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000000 -> 0xffffff9b
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 7670 Comm: syz-executor.3 Tainted: G W 5.18.0-rc1-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
I chose to not add Fixes: tag because race has minor consequences
and stable teams busy enough.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 May 2022 09:18:56 +0000 (10:18 +0100)]
Merge branch 'big-tcp'
Eric Dumazet says:
====================
tcp: BIG TCP implementation
This series implements BIG TCP as presented in netdev 0x15:
https://netdevconf.info/0x15/session.html?BIG-TCP
Jonathan Corbet made a nice summary: https://lwn.net/Articles/884104/
Standard TSO/GRO packet limit is 64KB
With BIG TCP, we allow bigger TSO/GRO packet sizes for IPv6 traffic.
Note that this feature is by default not enabled, because it might
break some eBPF programs assuming TCP header immediately follows IPv6 header.
While tcpdump recognizes the HBH/Jumbo header, standard pcap filters
are unable to skip over IPv6 extension headers.
Reducing number of packets traversing networking stack usually improves
performance, as shown on this experiment using a 100Gbit NIC, and 4K MTU.
'Standard' performance with current (74KB) limits.
for i in {1..10}; do ./netperf -t TCP_RR -H iroa23 -- -r80000,80000 -O MIN_LATENCY,P90_LATENCY,P99_LATENCY,THROUGHPUT|tail -1; done
77 138 183 8542.19
79 143 178 8215.28
70 117 164 9543.39
80 144 176 8183.71
78 126 155 9108.47
80 146 184 8115.19
71 113 165 9510.96
74 113 164 9518.74
79 137 178 8575.04
73 111 171 9561.73
Now enable BIG TCP on both hosts.
ip link set dev eth0 gro_max_size 185000 gso_max_size 185000
for i in {1..10}; do ./netperf -t TCP_RR -H iroa23 -- -r80000,80000 -O MIN_LATENCY,P90_LATENCY,P99_LATENCY,THROUGHPUT|tail -1; done
57 83 117 13871.38
64 118 155 11432.94
65 116 148 11507.62
60 105 136 12645.15
60 103 135 12760.34
60 102 134 12832.64
62 109 132 10877.68
58 82 115 14052.93
57 83 124 14212.58
57 82 119 14196.01
We see an increase of transactions per second, and lower latencies as well.
v7: adopt unsafe_memcpy() in mlx5 to avoid FORTIFY warnings.
v6: fix a compilation error for CONFIG_IPV6=n in
"net: allow gso_max_size to exceed 65536", reported by kernel bots.
v5: Replaced two patches (that were adding new attributes) with patches
from Alexander Duyck. Idea is to reuse existing gso_max_size/gro_max_size
v4: Rebased on top of Jakub series (Merge branch 'tso-gso-limit-split')
max_tso_size is now family independent.
v3: Fixed a typo in RFC number (Alexander)
Added Reviewed-by: tags from Tariq on mlx4/mlx5 parts.
v2: Removed the MAX_SKB_FRAGS change, this belongs to a different series.
Addressed feedback, for Alexander and nvidia folks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:34:08 +0000 (11:34 -0700)]
mlx5: support BIG TCP packets
mlx5 supports LSOv2.
IPv6 gro/tcp stacks insert a temporary Hop-by-Hop header
with JUMBO TLV for big packets.
We need to ignore/skip this HBH header when populating TX descriptor.
Note that ipv6_has_hopopt_jumbo() only recognizes very specific packet
layout, thus mlx5e_sq_xmit_wqe() is taking care of this layout only.
v7: adopt unsafe_memcpy() and MLX5_UNSAFE_MEMCPY_DISCLAIMER
v2: clear hopbyhop in mlx5e_tx_get_gso_ihs()
v4: fix compile error for CONFIG_MLX5_CORE_IPOIB=y
Signed-off-by: Coco Li <lixiaoyan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:34:07 +0000 (11:34 -0700)]
mlx4: support BIG TCP packets
mlx4 supports LSOv2 just fine.
IPv6 stack inserts a temporary Hop-by-Hop header
with JUMBO TLV for big packets.
We need to ignore the HBH header when populating TX descriptor.
Tested:
Before: (not enabling bigger TSO/GRO packets)
ip link set dev eth0 gso_max_size 65536 gro_max_size 65536
netperf -H lpaa18 -t TCP_RR -T2,2 -l 10 -Cc -- -r 70000,70000
MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to lpaa18.prod.google.com () port 0 AF_INET6 : first burst 0 : cpu bind
Local /Remote
Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem
Send Recv Size Size Time Rate local remote local remote
bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr
262144 540000 70000 70000 10.00 6591.45 0.86 1.34 62.490 97.446
262144 540000
After: (enabling bigger TSO/GRO packets)
ip link set dev eth0 gso_max_size 185000 gro_max_size 185000
netperf -H lpaa18 -t TCP_RR -T2,2 -l 10 -Cc -- -r 70000,70000
MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to lpaa18.prod.google.com () port 0 AF_INET6 : first burst 0 : cpu bind
Local /Remote
Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem
Send Recv Size Size Time Rate local remote local remote
bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr
262144 540000 70000 70000 10.00 8383.95 0.95 1.01 54.432 57.584
262144 540000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:34:06 +0000 (11:34 -0700)]
veth: enable BIG TCP packets
Set the TSO driver limit to GSO_MAX_SIZE (512 KB).
This allows the admin/user to set a GSO limit up to this value.
ip link set dev veth10 gso_max_size 200000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:34:05 +0000 (11:34 -0700)]
net: loopback: enable BIG TCP packets
Set the driver limit to GSO_MAX_SIZE (512 KB).
This allows the admin/user to set a GSO limit up to this value.
Tested:
ip link set dev lo gso_max_size 200000
netperf -H ::1 -t TCP_RR -l 100 -- -r 80000,80000 &
tcpdump shows :
18:28:42.962116 IP6 ::1 > ::1: HBH 40051 > 63780: Flags [P.], seq
3626480001:
3626560001, ack
3626560001, win 17743, options [nop,nop,TS val
3771179265 ecr
3771179265], length 80000
18:28:42.962138 IP6 ::1.63780 > ::1.40051: Flags [.], ack
3626560001, win 17743, options [nop,nop,TS val
3771179265 ecr
3771179265], length 0
18:28:42.962152 IP6 ::1 > ::1: HBH 63780 > 40051: Flags [P.], seq
3626560001:
3626640001, ack
3626560001, win 17743, options [nop,nop,TS val
3771179265 ecr
3771179265], length 80000
18:28:42.962157 IP6 ::1.40051 > ::1.63780: Flags [.], ack
3626640001, win 17743, options [nop,nop,TS val
3771179265 ecr
3771179265], length 0
18:28:42.962180 IP6 ::1 > ::1: HBH 40051 > 63780: Flags [P.], seq
3626560001:
3626640001, ack
3626640001, win 17743, options [nop,nop,TS val
3771179265 ecr
3771179265], length 80000
18:28:42.962214 IP6 ::1.63780 > ::1.40051: Flags [.], ack
3626640001, win 17743, options [nop,nop,TS val
3771179266 ecr
3771179265], length 0
18:28:42.962228 IP6 ::1 > ::1: HBH 63780 > 40051: Flags [P.], seq
3626640001:
3626720001, ack
3626640001, win 17743, options [nop,nop,TS val
3771179266 ecr
3771179265], length 80000
18:28:42.962233 IP6 ::1.40051 > ::1.63780: Flags [.], ack
3626720001, win 17743, options [nop,nop,TS val
3771179266 ecr
3771179266], length 0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Coco Li [Fri, 13 May 2022 18:34:04 +0000 (11:34 -0700)]
ipv6: Add hop-by-hop header to jumbograms in ip6_output
Instead of simply forcing a 0 payload_len in IPv6 header,
implement RFC 2675 and insert a custom extension header.
Note that only TCP stack is currently potentially generating
jumbograms, and that this extension header is purely local,
it wont be sent on a physical link.
This is needed so that packet capture (tcpdump and friends)
can properly dissect these large packets.
Signed-off-by: Coco Li <lixiaoyan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Fri, 13 May 2022 18:34:03 +0000 (11:34 -0700)]
net: allow gro_max_size to exceed 65536
Allow the gro_max_size to exceed a value larger than 65536.
There weren't really any external limitations that prevented this other
than the fact that IPv4 only supports a 16 bit length field. Since we have
the option of adding a hop-by-hop header for IPv6 we can allow IPv6 to
exceed this value and for IPv4 and non-TCP flows we can cap things at 65536
via a constant rather than relying on gro_max_size.
[edumazet] limit GRO_MAX_SIZE to (8 * 65535) to avoid overflows.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:34:02 +0000 (11:34 -0700)]
ipv6/gro: insert temporary HBH/jumbo header
Following patch will add GRO_IPV6_MAX_SIZE, allowing gro to build
BIG TCP ipv6 packets (bigger than 64K).
This patch changes ipv6_gro_complete() to insert a HBH/jumbo header
so that resulting packet can go through IPv6/TCP stacks.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:34:01 +0000 (11:34 -0700)]
ipv6/gso: remove temporary HBH/jumbo header
ipv6 tcp and gro stacks will soon be able to build big TCP packets,
with an added temporary Hop By Hop header.
If GSO is involved for these large packets, we need to remove
the temporary HBH header before segmentation happens.
v2: perform HBH removal from ipv6_gso_segment() instead of
skb_segment() (Alexander feedback)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:34:00 +0000 (11:34 -0700)]
ipv6: add struct hop_jumbo_hdr definition
Following patches will need to add and remove local IPv6 jumbogram
options to enable BIG TCP.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:33:59 +0000 (11:33 -0700)]
tcp_cubic: make hystart_ack_delay() aware of BIG TCP
hystart_ack_delay() had the assumption that a TSO packet
would not be bigger than GSO_MAX_SIZE.
This will no longer be true.
We should use sk->sk_gso_max_size instead.
This reduces chances of spurious Hystart ACK train detections.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:33:58 +0000 (11:33 -0700)]
net: limit GSO_MAX_SIZE to 524280 bytes
Make sure we will not overflow shinfo->gso_segs
Minimal TCP MSS size is 8 bytes, and shinfo->gso_segs
is a 16bit field.
TCP_MIN_GSO_SIZE is currently defined in include/net/tcp.h,
it seems cleaner to not bring tcp details into include/linux/netdevice.h
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Fri, 13 May 2022 18:33:57 +0000 (11:33 -0700)]
net: allow gso_max_size to exceed 65536
The code for gso_max_size was added originally to allow for debugging and
workaround of buggy devices that couldn't support TSO with blocks 64K in
size. The original reason for limiting it to 64K was because that was the
existing limits of IPv4 and non-jumbogram IPv6 length fields.
With the addition of Big TCP we can remove this limit and allow the value
to potentially go up to UINT_MAX and instead be limited by the tso_max_size
value.
So in order to support this we need to go through and clean up the
remaining users of the gso_max_size value so that the values will cap at
64K for non-TCPv6 flows. In addition we can clean up the GSO_MAX_SIZE value
so that 64K becomes GSO_LEGACY_MAX_SIZE and UINT_MAX will now be the upper
limit for GSO_MAX_SIZE.
v6: (edumazet) fixed a compile error if CONFIG_IPV6=n,
in a new sk_trim_gso_size() helper.
netif_set_tso_max_size() caps the requested TSO size
with GSO_MAX_SIZE.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 13 May 2022 18:33:56 +0000 (11:33 -0700)]
net: add IFLA_TSO_{MAX_SIZE|SEGS} attributes
New netlink attributes IFLA_TSO_MAX_SIZE and IFLA_TSO_MAX_SEGS
are used to report to user-space the device TSO limits.
ip -d link sh dev eth1
...
tso_max_size 65536 tso_max_segs 65535
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 May 2022 09:14:27 +0000 (10:14 +0100)]
Merge branch 'Renesas-RSZ-V2M-support'
Phil Edworthy says:
====================
Add Renesas RZ/V2M Ethernet support
The RZ/V2M Ethernet is very similar to R-Car Gen3 Ethernet-AVB, though
some small parts are the same as R-Car Gen2.
Other differences are:
* It has separate data (DI), error (Line 1) and management (Line 2) irqs
rather than one irq for all three.
* Instead of using the High-speed peripheral bus clock for gPTP, it has
a separate gPTP reference clock.
v4:
* Add clk_disable_unprepare() for gptp ref clk
v3:
* Really renamed irq_en_dis_regs to irq_en_dis this time
* Modified ravb_ptp_extts() to use irq_en_dis
* Added Reviewed-by tags
v2:
* Just net patches in this series
* Instead of reusing ch22 and ch24 interrupt names, use the proper names
* Renamed irq_en_dis_regs to irq_en_dis
* Squashed use of GIC reg versus GIE/GID and got rid of separate gptp_ptm_gic feature.
* Move err_mgmt_irqs code under multi_irqs
* Minor editing of the commit msgs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Edworthy [Thu, 12 May 2022 11:47:22 +0000 (12:47 +0100)]
ravb: Add support for RZ/V2M
RZ/V2M Ethernet is very similar to R-Car Gen3 Ethernet-AVB, though
some small parts are the same as R-Car Gen2.
Other differences to R-Car Gen3 and Gen2 are:
* It has separate data (DI), error (Line 1) and management (Line 2) irqs
rather than one irq for all three.
* Instead of using the High-speed peripheral bus clock for gPTP, it has a
separate gPTP reference clock.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Edworthy [Thu, 12 May 2022 11:47:21 +0000 (12:47 +0100)]
ravb: Use separate clock for gPTP
RZ/V2M has a separate gPTP reference clock that is used when the
AVB-DMAC Mode Register (CCC) gPTP Clock Select (CSEL) bits are
set to "01: High-speed peripheral bus clock".
Therefore, add a feature that allows this clock to be used for
gPTP.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Edworthy [Thu, 12 May 2022 11:47:20 +0000 (12:47 +0100)]
ravb: Support separate Line0 (Desc), Line1 (Err) and Line2 (Mgmt) irqs
R-Car has a combined interrupt line, ch22 = Line0_DiA | Line1_A | Line2_A.
RZ/V2M has separate interrupt lines for each of these, so add a feature
that allows the driver to get these interrupts and call the common handler.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Edworthy [Thu, 12 May 2022 11:47:19 +0000 (12:47 +0100)]
ravb: Separate handling of irq enable/disable regs into feature
Currently, when the HW has a single interrupt, the driver uses the
GIC, TIC, RIC0 registers to enable and disable interrupts.
When the HW has multiple interrupts, it uses the GIE, GID, TIE, TID,
RIE0, RID0 registers.
However, other devices, e.g. RZ/V2M, have multiple irqs and only have
the GIC, TIC, RIC0 registers.
Therefore, split this into a separate feature.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Edworthy [Thu, 12 May 2022 11:47:18 +0000 (12:47 +0100)]
dt-bindings: net: renesas,etheravb: Document RZ/V2M SoC
Document the Ethernet AVB IP found on RZ/V2M SoC.
It includes the Ethernet controller (E-MAC) and Dedicated Direct memory
access controller (DMAC) for transferring transmitted Ethernet frames
to and received Ethernet frames from respective storage areas in the
RAM at high speed.
The AVB-DMAC is compliant with IEEE 802.1BA, IEEE 802.1AS timing and
synchronization protocol, IEEE 802.1Qav real-time transfer, and the
IEEE 802.1Qat stream reservation protocol.
R-Car has a pair of combined interrupt lines:
ch22 = Line0_DiA | Line1_A | Line2_A
ch23 = Line0_DiB | Line1_B | Line2_B
Line0 for descriptor interrupts (which we call dia and dib).
Line1 for error related interrupts (which we call err_a and err_b).
Line2 for management and gPTP related interrupts (mgmt_a and mgmt_b).
RZ/V2M hardware has separate interrupt lines for each of these.
It has 3 clocks; the main AXI clock, the AMBA CHI (Coherent Hub
Interface) clock and a gPTP reference clock.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 May 2022 09:10:37 +0000 (10:10 +0100)]
Merge git://git./linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
This is v2 including deadlock fix in conntrack ecache rework
reported by Jakub Kicinski.
The following patchset contains Netfilter updates for net-next,
mostly updates to conntrack from Florian Westphal.
1) Add a dedicated list for conntrack event redelivery.
2) Include event redelivery list in conntrack dumps of dying type.
3) Remove per-cpu dying list for event redelivery, not used anymore.
4) Add netns .pre_exit to cttimeout to zap timeout objects before
synchronize_rcu() call.
5) Remove nf_ct_unconfirmed_destroy.
6) Add generation id for conntrack extensions for conntrack
timeout and helpers.
7) Detach timeout policy from conntrack on cttimeout module removal.
8) Remove __nf_ct_unconfirmed_destroy.
9) Remove unconfirmed list.
10) Remove unconditional local_bh_disable in init_conntrack().
11) Consolidate conntrack iterator nf_ct_iterate_cleanup().
12) Detect if ctnetlink listeners exist to short-circuit event
path early.
13) Un-inline nf_ct_ecache_ext_add().
14) Add nf_conntrack_events autodetect ctnetlink listener mode
and make it default.
15) Add nf_ct_ecache_exist() to check for event cache extension.
16) Extend flowtable reverse route lookup to include source, iif,
tos and mark, from Sven Auhagen.
17) Do not verify zero checksum UDP packets in nf_reject,
from Kevin Mitchell.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sridhar Samudrala [Thu, 12 May 2022 21:32:49 +0000 (14:32 -0700)]
ice: Expose RSS indirection tables for queue groups via ethtool
When ADQ queue groups (TCs) are created via tc mqprio command,
RSS contexts and associated RSS indirection tables are configured
automatically per TC based on the queue ranges specified for
each traffic class.
For ex:
tc qdisc add dev enp175s0f0 root mqprio num_tc 3 map 0 1 2 \
queues 2@0 8@2 4@10 hw 1 mode channel
will create 3 queue groups (TC 0-2) with queue ranges 2, 8 and 4
in 3 queue groups. Each queue group is associated with its
own RSS context and RSS indirection table.
Add support to expose RSS indirection tables for all ADQ queue
groups using ethtool RSS contexts interface.
ethtool -x enp175s0f0 context <tc-num>
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220512213249.3747424-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi [Thu, 12 May 2022 21:26:21 +0000 (14:26 -0700)]
ixgbe: add xdp frags support to ndo_xdp_xmit
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit
callback.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220512212621.3746140-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 12 May 2022 20:56:03 +0000 (13:56 -0700)]
eth: sfc: remove remnants of the out-of-tree napi_weight module param
Remove napi_weight statics which are set to 64 and never modified,
remnants of the out-of-tree napi_weight module param.
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220512205603.1536771-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 13 May 2022 17:25:08 +0000 (10:25 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-05-13
1) Cleanups for the code behind the XFRM offload API. This is a
preparation for the extension of the API for policy offload.
From Leon Romanovsky.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: drop not needed flags variable in XFRM offload struct
net/mlx5e: Use XFRM state direction instead of flags
netdevsim: rely on XFRM state direction instead of flags
ixgbe: propagate XFRM offload state direction instead of flags
xfrm: store and rely on direction to construct offload flags
xfrm: rename xfrm_state_offload struct to allow reuse
xfrm: delete not used number of external headers
xfrm: free not used XFRM_ESP_NO_TRAILER flag
====================
Link: https://lore.kernel.org/r/20220513151218.4010119-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ren Zhijie [Fri, 13 May 2022 01:27:21 +0000 (09:27 +0800)]
sfc: siena: Fix Kconfig dependencies
If CONFIG_PTP_1588_CLOCK=m and CONFIG_SFC_SIENA=y, the siena driver will fail to link:
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_remove_channel':
ptp.c:(.text+0xa28): undefined reference to `ptp_clock_unregister'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_probe_channel':
ptp.c:(.text+0x13a0): undefined reference to `ptp_clock_register'
ptp.c:(.text+0x1470): undefined reference to `ptp_clock_unregister'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_ptp_pps_worker':
ptp.c:(.text+0x1d29): undefined reference to `ptp_clock_event'
drivers/net/ethernet/sfc/siena/ptp.o: In function `efx_siena_ptp_get_ts_info':
ptp.c:(.text+0x301b): undefined reference to `ptp_clock_index'
To fix this build error, make SFC_SIENA depends on PTP_1588_CLOCK.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
d48523cb88e0 ("sfc: Copy shared files needed for Siena (part 2)")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220513012721.140871-1-renzhijie2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kevin Mitchell [Sat, 30 Apr 2022 03:40:27 +0000 (20:40 -0700)]
netfilter: conntrack: skip verification of zero UDP checksum
The checksum is optional for UDP packets. However nf_reject would
previously require a valid checksum to elicit a response such as
ICMP_DEST_UNREACH.
Add some logic to nf_reject_verify_csum to determine if a UDP packet has
a zero checksum and should therefore not be verified.
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sven Auhagen [Wed, 27 Apr 2022 07:15:15 +0000 (09:15 +0200)]
netfilter: flowtable: nft_flow_route use more data for reverse route
When creating a flow table entry, the reverse route is looked
up based on the current packet.
There can be scenarios where the user creates a custom ip rule
to route the traffic differently.
In order to support those scenarios, the lookup needs to add
more information based on the current packet.
The patch adds multiple new information to the route lookup.
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 25 Apr 2022 13:15:44 +0000 (15:15 +0200)]
netfilter: prefer extension check to pointer check
The pointer check usually results in a 'false positive': its likely
that the ctnetlink module is loaded but no event monitoring is enabled.
After recent change to autodetect ctnetlink usage and only allocate
the ecache extension if a listener is active, check if the extension
is present on a given conntrack.
If its not there, there is nothing to report and calls to the
notification framework can be elided.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 25 Apr 2022 13:15:43 +0000 (15:15 +0200)]
netfilter: conntrack: add nf_conntrack_events autodetect mode
This adds the new nf_conntrack_events=2 mode and makes it the
default.
This leverages the earlier flag in struct net to allow to avoid
the event extension as long as no event listener is active in
the namespace.
This avoids, for most cases, allocation of ct->ext area.
A followup patch will take further advantage of this by avoiding
calls down into the event framework if the extension isn't present.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 25 Apr 2022 13:15:42 +0000 (15:15 +0200)]
netfilter: conntrack: un-inline nf_ct_ecache_ext_add
Only called when new ct is allocated or the extension isn't present.
This function will be extended, place this in the conntrack module
instead of inlining.
The callers already depend on nf_conntrack module.
Return value is changed to bool, noone used the returned pointer.
Make sure that the core drops the newly allocated conntrack
if the extension is requested but can't be added.
This makes it necessary to ifdef the section, as the stub
always returns false we'd drop every new conntrack if the
the ecache extension is disabled in kconfig.
Add from data path (xt_CT, nft_ct) is unchanged.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 25 Apr 2022 13:15:41 +0000 (15:15 +0200)]
netfilter: nfnetlink: allow to detect if ctnetlink listeners exist
At this time, every new conntrack gets the 'event cache extension'
enabled for it.
This is because the 'net.netfilter.nf_conntrack_events' sysctl defaults
to 1.
Changing the default to 0 means that commands that rely on the event
notification extension, e.g. 'conntrack -E' or conntrackd, stop working.
We COULD detect if there is a listener by means of
'nfnetlink_has_listeners()' and only add the extension if this is true.
The downside is a dependency from conntrack module to nfnetlink module.
This adds a different way: inc/dec a counter whenever a ctnetlink group
is being (un)subscribed and toggle a flag in struct net.
Next patches will take advantage of this and will only add the event
extension if the flag is set.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Fri, 8 Apr 2022 11:10:19 +0000 (13:10 +0200)]
netfilter: conntrack: add nf_ct_iter_data object for nf_ct_iterate_cleanup*()
This patch adds a structure to collect all the context data that is
passed to the cleanup iterator.
struct nf_ct_iter_data {
struct net *net;
void *data;
u32 portid;
int report;
};
There is a netns field that allows to clean up conntrack entries
specifically owned by the specified netns.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 11 Apr 2022 11:01:25 +0000 (13:01 +0200)]
netfilter: conntrack: avoid unconditional local_bh_disable
Now that the conntrack entry isn't placed on the pcpu list anymore the
bh only needs to be disabled in the 'expectation present' case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 11 Apr 2022 11:01:24 +0000 (13:01 +0200)]
netfilter: conntrack: remove unconfirmed list
It has no function anymore and can be removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 11 Apr 2022 11:01:23 +0000 (13:01 +0200)]
netfilter: conntrack: remove __nf_ct_unconfirmed_destroy
Its not needed anymore:
A. If entry is totally new, then the rcu-protected resource
must already have been removed from global visibility before call
to nf_ct_iterate_destroy.
B. If entry was allocated before, but is not yet in the hash table
(uncofirmed case), genid gets incremented and synchronize_rcu() call
makes sure access has completed.
C. Next attempt to peek at extension area will fail for unconfirmed
conntracks, because ext->genid != genid.
D. Conntracks in the hash are iterated as before.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 11 Apr 2022 11:01:22 +0000 (13:01 +0200)]
netfilter: cttimeout: decouple unlink and free on netns destruction
Increment the extid on module removal; this makes sure that even
in extreme cases any old uncofirmed entry that happened to be kept
e.g. on nfnetlink_queue list will not trip over a stale timeout
reference.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 11 Apr 2022 11:01:21 +0000 (13:01 +0200)]
netfilter: extensions: introduce extension genid count
Multiple netfilter extensions store pointers to external data
in their extension area struct.
Examples:
1. Timeout policies
2. Connection tracking helpers.
No references are taken for these.
When a helper or timeout policy is removed, the conntrack table gets
traversed and affected extensions are cleared.
Conntrack entries not yet in the hashtable are referenced via a special
list, the unconfirmed list.
On removal of a policy or connection tracking helper, the unconfirmed
list gets traversed an all entries are marked as dying, this prevents
them from getting committed to the table at insertion time: core checks
for dying bit, if set, the conntrack entry gets destroyed at confirm
time.
The disadvantage is that each new conntrack has to be added to the percpu
unconfirmed list, and each insertion needs to remove it from this list.
The list is only ever needed when a policy or helper is removed -- a rare
occurrence.
Add a generation ID count: Instead of adding to the list and then
traversing that list on policy/helper removal, increment a counter
that is stored in the extension area.
For unconfirmed conntracks, the extension has the genid valid at ct
allocation time.
Removal of a helper/policy etc. increments the counter.
At confirmation time, validate that ext->genid == global_id.
If the stored number is not the same, do not allow the conntrack
insertion, just like as if a confirmed-list traversal would have flagged
the entry as dying.
After insertion, the genid is no longer relevant (conntrack entries
are now reachable via the conntrack table iterators and is set to 0.
This allows removal of the percpu unconfirmed list.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 11 Apr 2022 11:01:20 +0000 (13:01 +0200)]
netfilter: remove nf_ct_unconfirmed_destroy helper
This helper tags connections not yet in the conntrack table as
dying. These nf_conn entries will be dropped instead when the
core attempts to insert them from the input or postrouting
'confirm' hook.
After the previous change, the entries get unlinked from the
list earlier, so that by the time the actual exit hook runs,
new connections no longer have a timeout policy assigned.
Its enough to walk the hashtable instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 11 Apr 2022 11:01:19 +0000 (13:01 +0200)]
netfilter: cttimeout: decouple unlink and free on netns destruction
Make it so netns pre_exit unlinks the objects from the pernet list, so
they cannot be found anymore.
netns core issues a synchronize_rcu() before calling the exit hooks so
any the time the exit hooks run unconfirmed nf_conn entries have been
free'd or they have been committed to the hashtable.
The exit hook still tags unconfirmed entries as dying, this can
now be removed in a followup change.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 11 Apr 2022 11:01:18 +0000 (13:01 +0200)]
netfilter: conntrack: remove the percpu dying list
Its no longer needed. Entries that need event redelivery are placed
on the new pernet dying list.
The advantage is that there is no need to take additional spinlock on
conntrack removal unless event redelivery failed or the conntrack entry
was never added to the table in the first place (confirmed bit not set).
The IPS_CONFIRMED bit now needs to be set as soon as the entry has been
unlinked from the unconfirmed list, else the destroy function may
attempt to unlink it a second time.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 11 Apr 2022 11:01:17 +0000 (13:01 +0200)]
netfilter: conntrack: include ecache dying list in dumps
The new pernet dying list includes conntrack entries that await
delivery of the 'destroy' event via ctnetlink.
The old percpu dying list will be removed soon.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 11 Apr 2022 11:01:16 +0000 (13:01 +0200)]
netfilter: ecache: use dedicated list for event redelivery
This disentangles event redelivery and the percpu dying list.
Because entries are now stored on a dedicated list, all
entries are in NFCT_ECACHE_DESTROY_FAIL state and all entries
still have confirmed bit set -- the reference count is at least 1.
The 'struct net' back-pointer can be removed as well.
The pcpu dying list will be removed eventually, it has no functionality.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David S. Miller [Fri, 13 May 2022 11:47:41 +0000 (12:47 +0100)]
Merge branch 'bnxt_en-next'
Michael Chan says:
====================
bnxt_en: Updates for net-next
This small patchset updates the firmware interface, adds timestamping
support for all receive packets, and adds revised NVRAM package error
messages for ethtool and devlink.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Fri, 13 May 2022 02:40:24 +0000 (22:40 -0400)]
bnxt_en: parse and report result field when NVRAM package install fails
Instead of always returning -ENOPKG, decode the firmware error
code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails.
Return a more suitable error code to userspace and log an error
in dmesg.
This is version 2 of the earlier patch that was reverted:
02acd399533e ("bnxt_en: parse result field when NVRAM package install fails")
In this new version, if the call is made through devlink instead of
ethtool, we'll also set the error message in extack.
Link: https://lore.kernel.org/netdev/20220307141358.4d52462e@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavan Chebbi [Fri, 13 May 2022 02:40:23 +0000 (22:40 -0400)]
bnxt_en: Enable packet timestamping for all RX packets
Add driver support to enable timestamping on all RX packets
that are received by the NIC. This capability can be requested
by the applications using SIOCSHWTSTAMP ioctl with filter type
HWTSTAMP_FILTER_ALL.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavan Chebbi [Fri, 13 May 2022 02:40:22 +0000 (22:40 -0400)]
bnxt_en: Configure ptp filters during bnxt open
For correctness, we need to configure the packet filters for timestamping
during bnxt_open. This way they are always configured after firmware
reset or chip reset. We should not assume that the filters will always
be retained across resets.
This patch modifies the ioctl handler and always configures the PTP
filters in the bnxt_open() path.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 13 May 2022 02:40:21 +0000 (22:40 -0400)]
bnxt_en: Update firmware interface to 1.10.2.95
The main changes are timestamp support for all RX packets and new PCIe
statistics.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Thu, 12 May 2022 17:18:53 +0000 (11:18 -0600)]
net: axienet: Use NAPI for TX completion path
This driver was using the TX IRQ handler to perform all TX completion
tasks. Under heavy TX network load, this can cause significant irqs-off
latencies (found to be in the hundreds of microseconds using ftrace).
This can cause other issues, such as overrunning serial UART FIFOs when
using high baud rates with limited UART FIFO sizes.
Switch to using a NAPI poll handler to perform the TX completion work
to get this out of hard IRQ context and avoid the IRQ latency impact.
A separate poll handler is used for TX and RX since they have separate
IRQs on this controller, so that the completion work for each of them
stays on the same CPU as the interrupt.
Testing on a Xilinx MPSoC ZU9EG platform using iperf3 from a Linux PC
through a switch at 1G link speed showed no significant change in TX or
RX throughput, with approximately 941 Mbps before and after. Hard IRQ
time in the TX throughput test was significantly reduced from 12% to
below 1% on the CPU handling TX interrupts, with total hard+soft IRQ CPU
usage dropping from about 56% down to 48%.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Thu, 12 May 2022 17:18:52 +0000 (11:18 -0600)]
net: axienet: Be more careful about updating tx_bd_tail
The axienet_start_xmit function was updating the tx_bd_tail variable
multiple times, with potential rollbacks on error or invalid
intermediate positions, even though this variable is also used in the
TX completion path. Use READ_ONCE where this variable is read and
WRITE_ONCE where it is written to make this update more atomic, and
move the write before the MMIO write to start the transfer, so it is
protected by that implicit write barrier.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 12 May 2022 16:56:01 +0000 (09:56 -0700)]
inet: add READ_ONCE(sk->sk_bound_dev_if) in INET_MATCH()
INET_MATCH() runs without holding a lock on the socket.
We probably need to annotate most reads.
This patch makes INET_MATCH() an inline function
to ease our changes.
v2:
We remove the 32bit version of it, as modern compilers
should generate the same code really, no need to
try to be smarter.
Also make 'struct net *net' the first argument.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Thu, 12 May 2022 13:12:07 +0000 (16:12 +0300)]
selftests: fib_nexthops: Make the test more robust
Rarely some of the test cases fail. Make the test more robust by increasing
the timeout of ping commands to 5 seconds.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 13 May 2022 10:35:46 +0000 (11:35 +0100)]
Merge branch 'lan95xx-no-polling'
Lukas Wunner says:
====================
Polling be gone on LAN95xx
Do away with link status polling on LAN95xx USB Ethernet
and rely on interrupts instead, thereby reducing bus traffic,
CPU overhead and improving interface bringup latency.
Link to v2:
https://lore.kernel.org/netdev/cover.
1651574194.git.lukas@wunner.de/
Only change since v2:
* Patch [5/7]:
* Drop call to __irq_enter_raw() which worked around a warning in
generic_handle_domain_irq(). That warning is gone since
792ea6a074ae (queued on tip.git/irq/urgent).
(Marc Zyngier, Thomas Gleixner)
====================
Lukas Wunner [Thu, 12 May 2022 08:42:07 +0000 (10:42 +0200)]
net: phy: smsc: Cope with hot-removal in interrupt handler
If reading the Interrupt Source Flag register fails with -ENODEV, then
the PHY has been hot-removed and the correct response is to bail out
instead of throwing a WARN splat and attempting to suspend the PHY.
The PHY should be stopped in due course anyway as the kernel
asynchronously tears down the device.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lukas Wunner [Thu, 12 May 2022 08:42:06 +0000 (10:42 +0200)]
net: phy: smsc: Cache interrupt mask
Cache the interrupt mask to avoid re-reading it from the PHY upon every
interrupt.
This will simplify a subsequent commit which detects hot-removal in the
interrupt handler and bails out.
Analyzing and debugging PHY transactions also becomes simpler if such
redundant reads are avoided.
Last not least, interrupt overhead and latency is slightly improved.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lukas Wunner [Thu, 12 May 2022 08:42:05 +0000 (10:42 +0200)]
usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling
Link status of SMSC LAN95xx chips is polled once per second, even though
they're capable of signaling PHY interrupts through the MAC layer.
Forward those interrupts to the PHY driver to avoid polling. Benefits
are reduced bus traffic, reduced CPU overhead and quicker interface
bringup.
Polling was introduced in 2016 by commit
d69d16949346 ("usbnet:
smsc95xx: fix link detection for disabled autonegotiation").
Back then, the LAN95xx driver neglected to enable the ENERGYON interrupt,
hence couldn't detect link-up events when auto-negotiation was disabled.
The proper solution would have been to enable the ENERGYON interrupt
instead of polling.
Since then, PHY handling was moved from the LAN95xx driver to the SMSC
PHY driver with commit
05b35e7eb9a1 ("smsc95xx: add phylib support").
That PHY driver is capable of link detection with auto-negotiation
disabled because it enables the ENERGYON interrupt.
Note that signaling interrupts through the MAC layer not only works with
the integrated PHY, but also with an external PHY, provided its
interrupt pin is attached to LAN95xx's nPHY_INT pin.
In the unlikely event that the interrupt pin of an external PHY is
attached to a GPIO of the SoC (or not connected at all), the driver can
be amended to retrieve the irq from the PHY's of_node.
To forward PHY interrupts to phylib, it is not sufficient to call
phy_mac_interrupt(). Instead, the PHY's interrupt handler needs to run
so that PHY interrupts are cleared. That's because according to page
119 of the LAN950x datasheet, "The source of this interrupt is a level.
The interrupt persists until it is cleared in the PHY."
https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf
Therefore, create an IRQ domain with a single IRQ for the PHY. In the
future, the IRQ domain may be extended to support the 11 GPIOs on the
LAN95xx.
Normally the PHY interrupt should be masked until the PHY driver has
cleared it. However masking requires a (sleeping) USB transaction and
interrupts are received in (non-sleepable) softirq context. I decided
not to mask the interrupt at all (by using the dummy_irq_chip's noop
->irq_mask() callback): The USB interrupt endpoint is polled in 1 msec
intervals and normally that's sufficient to wake the PHY driver's IRQ
thread and have it clear the interrupt. If it does take longer, worst
thing that can happen is the IRQ thread is woken again. No big deal.
Because PHY interrupts are now perpetually enabled, there's no need to
selectively enable them on suspend. So remove all invocations of
smsc95xx_enable_phy_wakeup_interrupts().
In smsc95xx_resume(), move the call of phy_init_hw() before
usbnet_resume() (which restarts the status URB) to ensure that the PHY
is fully initialized when an interrupt is handled.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch> # from a PHY perspective
Cc: Andre Edich <andre.edich@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lukas Wunner [Thu, 12 May 2022 08:42:04 +0000 (10:42 +0200)]
usbnet: smsc95xx: Avoid link settings race on interrupt reception
When a PHY interrupt is signaled, the SMSC LAN95xx driver updates the
MAC full duplex mode and PHY flow control registers based on cached data
in struct phy_device:
smsc95xx_status() # raises EVENT_LINK_RESET
usbnet_deferred_kevent()
smsc95xx_link_reset() # uses cached data in phydev
Simultaneously, phylib polls link status once per second and updates
that cached data:
phy_state_machine()
phy_check_link_status()
phy_read_status()
lan87xx_read_status()
genphy_read_status() # updates cached data in phydev
If smsc95xx_link_reset() wins the race against genphy_read_status(),
the registers may be updated based on stale data.
E.g. if the link was previously down, phydev->duplex is set to
DUPLEX_UNKNOWN and that's what smsc95xx_link_reset() will use, even
though genphy_read_status() may update it to DUPLEX_FULL afterwards.
PHY interrupts are currently only enabled on suspend to trigger wakeup,
so the impact of the race is limited, but we're about to enable them
perpetually.
Avoid the race by delaying execution of smsc95xx_link_reset() until
phy_state_machine() has done its job and calls back via
smsc95xx_handle_link_change().
Signaling EVENT_LINK_RESET on wakeup is not necessary because phylib
picks up link status changes through polling. So drop the declaration
of a ->link_reset() callback.
Note that the semicolon on a line by itself added in smsc95xx_status()
is a placeholder for a function call which will be added in a subsequent
commit. That function call will actually handle the INT_ENP_PHY_INT_
interrupt.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lukas Wunner [Thu, 12 May 2022 08:42:03 +0000 (10:42 +0200)]
usbnet: smsc95xx: Don't reset PHY behind PHY driver's back
smsc95xx_reset() resets the PHY behind the PHY driver's back, which
seems like a bad idea generally. Remove that portion of the function.
We're about to use PHY interrupts instead of polling to detect link
changes on SMSC LAN95xx chips. Because smsc95xx_reset() is called from
usbnet_open(), PHY interrupt settings are lost whenever the net_device
is brought up.
There are two other callers of smsc95xx_reset(), namely smsc95xx_bind()
and smsc95xx_reset_resume(), and both may indeed benefit from a PHY
reset. However they already perform one through their calls to
phy_connect_direct() and phy_init_hw().
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Gabriel Hojda <ghojda@yo2urs.ro>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lukas Wunner [Thu, 12 May 2022 08:42:02 +0000 (10:42 +0200)]
usbnet: smsc95xx: Don't clear read-only PHY interrupt
Upon receiving data from the Interrupt Endpoint, the SMSC LAN95xx driver
attempts to clear the signaled interrupts by writing "all ones" to the
Interrupt Status Register.
However the driver only ever enables a single type of interrupt, namely
the PHY Interrupt. And according to page 119 of the LAN950x datasheet,
its bit in the Interrupt Status Register is read-only. There's no other
way to clear it than in a separate PHY register:
https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf
Consequently, writing "all ones" to the Interrupt Status Register is
pointless and can be dropped.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lukas Wunner [Thu, 12 May 2022 08:42:01 +0000 (10:42 +0200)]
usbnet: Run unregister_netdev() before unbind() again
Commit
2c9d6c2b871d ("usbnet: run unbind() before unregister_netdev()")
sought to fix a use-after-free on disconnect of USB Ethernet adapters.
It turns out that a different fix is necessary to address the issue:
https://lore.kernel.org/netdev/
18b3541e5372bc9b9fc733d422f4e698c089077c.
1650177997.git.lukas@wunner.de/
So the commit was not necessary.
The commit made binding and unbinding of USB Ethernet asymmetrical:
Before, usbnet_probe() first invoked the ->bind() callback and then
register_netdev(). usbnet_disconnect() mirrored that by first invoking
unregister_netdev() and then ->unbind().
Since the commit, the order in usbnet_disconnect() is reversed and no
longer mirrors usbnet_probe().
One consequence is that a PHY disconnected (and stopped) in ->unbind()
is afterwards stopped once more by unregister_netdev() as it closes the
netdev before unregistering. That necessitates a contortion in ->stop()
because the PHY may only be stopped if it hasn't already been
disconnected.
Reverting the commit allows making the call to phy_stop() unconditional
in ->stop().
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Li [Thu, 12 May 2022 08:03:57 +0000 (16:03 +0800)]
net: ethernet: fix platform_no_drv_owner.cocci warning
Remove .owner field if calls are used which set it automatically.
./drivers/net/ethernet/sunplus/spl2sw_driver.c:569:3-8: No need to set
.owner here. The core will do it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Thu, 12 May 2022 06:56:31 +0000 (14:56 +0800)]
net: page_pool: add page allocation stats for two fast page allocate path
Currently If use page pool allocation stats to analysis a RX performance
degradation problem. These stats only count for pages allocate from
page_pool_alloc_pages. But nic drivers such as hns3 use
page_pool_dev_alloc_frag to allocate pages, so page stats in this API
should also be counted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiapeng Chong [Thu, 12 May 2022 06:09:05 +0000 (14:09 +0800)]
net: ethernet: Use swap() instead of open coding it
Clean the following coccicheck warning:
./drivers/net/ethernet/sunplus/spl2sw_driver.c:217:27-28: WARNING
opportunity for swap().
./drivers/net/ethernet/sunplus/spl2sw_driver.c:222:27-28: WARNING
opportunity for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 12 May 2022 23:52:21 +0000 (16:52 -0700)]
Merge branch 'net-inet-retire-port-only-listening_hash'
Martin KaFai Lau says:
====================
net: inet: Retire port only listening_hash
This series is to retire the port only listening_hash.
The listen sk is currently stored in two hash tables,
listening_hash (hashed by port) and lhash2 (hashed by port and address).
After commit
0ee58dad5b06 ("net: tcp6: prefer listeners bound to an address")
and commit
d9fbc7f6431f ("net: tcp: prefer listeners bound to an address"),
the TCP-SYN lookup fast path does not use listening_hash.
The commit
05c0b35709c5 ("tcp: seq_file: Replace listening_hash with lhash2")
also moved the seq_file (/proc/net/tcp) iteration usage from
listening_hash to lhash2.
There are still a few listening_hash usages left.
One of them is inet_reuseport_add_sock() which uses the listening_hash
to search a listen sk during the listen() system call. This turns
out to be very slow on use cases that listen on many different
VIPs at a popular port (e.g. 443). [ On top of the slowness in
adding to the tail in the IPv6 case ]. A latter patch has a
selftest to demonstrate this case.
This series takes this chance to move all remaining listening_hash
usages to lhash2 and then retire listening_hash.
====================
Link: https://lore.kernel.org/r/20220512000546.188616-1-kafai@fb.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin KaFai Lau [Thu, 12 May 2022 00:06:11 +0000 (17:06 -0700)]
net: selftests: Stress reuseport listen
This patch adds a test that has 300 VIPs listening on port 443.
Each VIP:443 will have 80 listening socks by using SO_REUSEPORT.
Thus, it will have 24000 listening socks.
Before removing the port only listening_hash, all socks will be in the
same port 443 bucket and inet_reuseport_add_sock() spends much time to
walk through the bucket. After removing the port only listening_hash
and move all usage to the port+addr lhash2, each bucket in the
ideal case has 80 sk which is much smaller than before.
Here is the test result from a qemu:
Before: listen 24000 socks took 210.
210485362 (~210s)
After: listen 24000 socks took 0.207173 (~210ms)
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin KaFai Lau [Thu, 12 May 2022 00:06:05 +0000 (17:06 -0700)]
net: inet: Retire port only listening_hash
The listen sk is currently stored in two hash tables,
listening_hash (hashed by port) and lhash2 (hashed by port and address).
After commit
0ee58dad5b06 ("net: tcp6: prefer listeners bound to an address")
and commit
d9fbc7f6431f ("net: tcp: prefer listeners bound to an address"),
the TCP-SYN lookup fast path does not use listening_hash.
The commit
05c0b35709c5 ("tcp: seq_file: Replace listening_hash with lhash2")
also moved the seq_file (/proc/net/tcp) iteration usage from
listening_hash to lhash2.
There are still a few listening_hash usages left.
One of them is inet_reuseport_add_sock() which uses the listening_hash
to search a listen sk during the listen() system call. This turns
out to be very slow on use cases that listen on many different
VIPs at a popular port (e.g. 443). [ On top of the slowness in
adding to the tail in the IPv6 case ]. The latter patch has a
selftest to demonstrate this case.
This patch takes this chance to move all remaining listening_hash
usages to lhash2 and then retire listening_hash.
Since most changes need to be done together, it is hard to cut
the listening_hash to lhash2 switch into small patches. The
changes in this patch is highlighted here for the review
purpose.
1. Because of the listening_hash removal, lhash2 can use the
sk->sk_nulls_node instead of the icsk->icsk_listen_portaddr_node.
This will also keep the sk_unhashed() check to work as is
after stop adding sk to listening_hash.
The union is removed from inet_listen_hashbucket because
only nulls_head is needed.
2. icsk->icsk_listen_portaddr_node and its helpers are removed.
3. The current lhash2 users needs to iterate with sk_nulls_node
instead of icsk_listen_portaddr_node.
One case is in the inet[6]_lhash2_lookup().
Another case is the seq_file iterator in tcp_ipv4.c.
One thing to note is sk_nulls_next() is needed
because the old inet_lhash2_for_each_icsk_continue()
does a "next" first before iterating.
4. Move the remaining listening_hash usage to lhash2
inet_reuseport_add_sock() which this series is
trying to improve.
inet_diag.c and mptcp_diag.c are the final two
remaining use cases and is moved to lhash2 now also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin KaFai Lau [Thu, 12 May 2022 00:05:58 +0000 (17:05 -0700)]
net: inet: Open code inet_hash2 and inet_unhash2
This patch folds lhash2 related functions into __inet_hash and
inet_unhash. This will make the removal of the listening_hash
in a latter patch easier to review.
First, this patch folds inet_hash2 into __inet_hash.
For unhash, the current call sequence is like
inet_unhash() => __inet_unhash() => inet_unhash2().
The specific testing cases in __inet_unhash() are mostly related
to TCP_LISTEN sk and its caller inet_unhash() already has
the TCP_LISTEN test, so this patch folds both __inet_unhash() and
inet_unhash2() into inet_unhash().
Note that all listening_hash users also have lhash2 initialized,
so the !h->lhash2 check is no longer needed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin KaFai Lau [Thu, 12 May 2022 00:05:52 +0000 (17:05 -0700)]
net: inet: Remove count from inet_listen_hashbucket
After commit
0ee58dad5b06 ("net: tcp6: prefer listeners bound to an address")
and commit
d9fbc7f6431f ("net: tcp: prefer listeners bound to an address"),
the count is no longer used. This patch removes it.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 12 May 2022 23:49:32 +0000 (16:49 -0700)]
Merge branch 'make-sfc-siena-ko-specific-to-siena'
Martin Habets says:
====================
Make sfc-siena.ko specific to Siena
This series is a follow-up to the one titled "Move Siena into
a separate subdirectory".
It enhances the new sfc-siena.ko module to differentiate it from sfc.ko.
Patches
Patches 1-5 create separate Kconfig options for Siena, and adjusts the
various names used for work items and directories.
Patch 6 reinstates SRIOV functionality in sfc-siena.ko.
Testing
Various build tests were done such as allyesconfig, W=1 and sparse.
The new sfc-siena.ko and sfc.ko modules were tested on a machine with NICs
for both modules in them.
Inserting the updated sfc.ko and the new sfc-siena.ko modules at the same
time works, and no work items and directories exist with the same name.
====================
Link: https://lore.kernel.org/r/165228589518.696.7119477411428288875.stgit@palantir17.mph.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Habets [Wed, 11 May 2022 16:20:25 +0000 (17:20 +0100)]
sfc/siena: Reinstate SRIOV init/fini function calls
They were removed in the first series since they were not used for EF10.
Put that code back for Siena, with the prototypes in siena_sriov.h
since that file is a more applicable place for it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Habets [Wed, 11 May 2022 16:20:13 +0000 (17:20 +0100)]
sfc/siena: Make PTP and reset support specific for Siena
Change the clock name and work queue names to differentiate them from
the names used in sfc.ko.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Habets [Wed, 11 May 2022 16:20:01 +0000 (17:20 +0100)]
sfc/siena: Make MCDI logging support specific for Siena
Add a Siena Kconfig option and use it in stead of the sfc one.
Rename the internal variable for the 'mcdi_logging_default' module
parameter to avoid a naming conflict with the one in sfc.ko.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Habets [Wed, 11 May 2022 16:19:49 +0000 (17:19 +0100)]
siena: Make HWMON support specific for Siena
Add a Siena Kconfig option and use it in stead of the sfc one.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Habets [Wed, 11 May 2022 16:19:36 +0000 (17:19 +0100)]
siena: Make SRIOV support specific for Siena
Add a Siena Kconfig option and use it in stead of the sfc one.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Habets [Wed, 11 May 2022 16:19:24 +0000 (17:19 +0100)]
siena: Make MTD support specific for Siena
Add a Siena Kconfig option and use it in stead of the sfc one.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 12 May 2022 23:39:21 +0000 (16:39 -0700)]
Merge branch 'restructure-struct-ocelot_port'
Vladimir Oltean says:
====================
Restructure struct ocelot_port
This patch set represents preparation for further work. It adds an
"index" field to struct ocelot_port, and populates it from the Felix DSA
driver and Ocelot switchdev driver.
The users of struct ocelot_port :: index are the same users as those of
struct ocelot_port_private :: chip_port.
====================
Link: https://lore.kernel.org/r/20220511100637.568950-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 11 May 2022 10:06:37 +0000 (13:06 +0300)]
net: mscc: ocelot: move ocelot_port_private :: chip_port to ocelot_port :: index
Currently the ocelot switch lib is unaware of the index of a struct
ocelot_port, since that is kept in the encapsulating structures of outer
drivers (struct dsa_port :: index, struct ocelot_port_private :: chip_port).
With the upcoming increase in complexity associated with assigning DSA
tag_8021q CPU ports to certain user ports, it becomes necessary for the
switch lib to be able to retrieve the index of a certain ocelot_port.
Therefore, introduce a new u8 to ocelot_port (same size as the chip_port
used by the ocelot switchdev driver) and rework the existing code to
populate and use it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 11 May 2022 10:06:36 +0000 (13:06 +0300)]
net: mscc: ocelot: minimize holes in struct ocelot_port
Reorder members of struct ocelot_port to eliminate holes and reduce
structure size. Pahole says:
Before:
struct ocelot_port {
struct ocelot * ocelot; /* 0 8 */
struct regmap * target; /* 8 8 */
bool vlan_aware; /* 16 1 */
/* XXX 7 bytes hole, try to pack */
const struct ocelot_bridge_vlan * pvid_vlan; /* 24 8 */
unsigned int ptp_skbs_in_flight; /* 32 4 */
u8 ptp_cmd; /* 36 1 */
/* XXX 3 bytes hole, try to pack */
struct sk_buff_head tx_skbs; /* 40 96 */
/* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
u8 ts_id; /* 136 1 */
/* XXX 3 bytes hole, try to pack */
phy_interface_t phy_mode; /* 140 4 */
bool is_dsa_8021q_cpu; /* 144 1 */
bool learn_ena; /* 145 1 */
/* XXX 6 bytes hole, try to pack */
struct net_device * bond; /* 152 8 */
bool lag_tx_active; /* 160 1 */
/* XXX 1 byte hole, try to pack */
u16 mrp_ring_id; /* 162 2 */
/* XXX 4 bytes hole, try to pack */
struct net_device * bridge; /* 168 8 */
int bridge_num; /* 176 4 */
u8 stp_state; /* 180 1 */
/* XXX 3 bytes hole, try to pack */
int speed; /* 184 4 */
/* size: 192, cachelines: 3, members: 18 */
/* sum members: 161, holes: 7, sum holes: 27 */
/* padding: 4 */
};
After:
struct ocelot_port {
struct ocelot * ocelot; /* 0 8 */
struct regmap * target; /* 8 8 */
struct net_device * bond; /* 16 8 */
struct net_device * bridge; /* 24 8 */
const struct ocelot_bridge_vlan * pvid_vlan; /* 32 8 */
phy_interface_t phy_mode; /* 40 4 */
unsigned int ptp_skbs_in_flight; /* 44 4 */
struct sk_buff_head tx_skbs; /* 48 96 */
/* --- cacheline 2 boundary (128 bytes) was 16 bytes ago --- */
u16 mrp_ring_id; /* 144 2 */
u8 ptp_cmd; /* 146 1 */
u8 ts_id; /* 147 1 */
u8 stp_state; /* 148 1 */
bool vlan_aware; /* 149 1 */
bool is_dsa_8021q_cpu; /* 150 1 */
bool learn_ena; /* 151 1 */
bool lag_tx_active; /* 152 1 */
/* XXX 3 bytes hole, try to pack */
int bridge_num; /* 156 4 */
int speed; /* 160 4 */
/* size: 168, cachelines: 3, members: 18 */
/* sum members: 161, holes: 1, sum holes: 3 */
/* padding: 4 */
/* last cacheline: 40 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 11 May 2022 10:06:35 +0000 (13:06 +0300)]
net: mscc: ocelot: delete ocelot_port :: xmit_template
This is no longer used since commit
7c4bb540e917 ("net: dsa: tag_ocelot:
create separate tagger for Seville").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 12 May 2022 23:38:56 +0000 (16:38 -0700)]
Merge branch 'dsa-changes-for-multiple-cpu-ports-part-1'
Vladimir Oltean says:
====================
DSA changes for multiple CPU ports (part 1)
I am trying to enable the second internal port pair from the NXP LS1028A
Felix switch for DSA-tagged traffic via "ocelot-8021q". This series
represents part 1 (of an unknown number) of that effort.
It does some preparation work, like managing host flooding in DSA via a
dedicated method, and removing the CPU port as argument from the tagging
protocol change procedure.
In terms of driver-specific changes, it reworks the 2 tag protocol
implementations in the Felix driver to have a structured data format.
It enables host flooding towards all tag_8021q CPU ports. It dynamically
updates the tag_8021q CPU port used for traps. It also fixes a bug
introduced by a previous refactoring/oversimplification commit in
net-next.
====================
Link: https://lore.kernel.org/r/20220511095020.562461-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 11 May 2022 09:50:20 +0000 (12:50 +0300)]
net: dsa: felix: reimplement tagging protocol change with function pointers
The error handling for the current tagging protocol change procedure is
a bit brittle (we dismantle the previous tagging protocol entirely
before setting up the new one). By identifying which parts of a tagging
protocol are unique to itself and which parts are shared with the other,
we can implement a protocol change procedure where error handling is a
bit more robust, because we start setting up the new protocol first, and
tear down the old one only after the setup of the specific and shared
parts succeeded.
The protocol change is a bit too open-coded too, in the area of
migrating host flood settings and MDBs. By identifying what differs
between tagging protocols (the forwarding masks for host flooding) we
can implement a more straightforward migration procedure which is
handled in the shared portion of the protocol change, rather than
individually by each protocol.
Therefore, a more structured approach calls for the introduction of a
structure of function pointers per tagging protocol. This covers setup,
teardown and the host forwarding mask. In the future it will also cover
how to prepare for a new DSA master.
The initial tagging protocol setup (at driver probe time) and the final
teardown (at driver removal time) are also adapted to call into the
structured methods of the specific protocol in current use. This is
especially relevant for teardown, where we previously called
felix_del_tag_protocol() only for the first CPU port. But by not
specifying which CPU port this is for, we gain more flexibility to
support multiple CPU ports in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>