OSDN Git Service
Johannes Berg [Tue, 11 Apr 2017 13:34:58 +0000 (15:34 +0200)]
bpf: remove struct bpf_map_type_list
There's no need to have struct bpf_map_type_list since
it just contains a list_head, the type, and the ops
pointer. Since the types are densely packed and not
actually dynamically registered, it's much easier and
smaller to have an array of type->ops pointer. Also
initialize this array statically to remove code needed
to initialize it.
In order to save duplicating the list, move it to the
types header file added by the previous patch and
include it in the same fashion.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Tue, 11 Apr 2017 13:34:57 +0000 (15:34 +0200)]
bpf: remove struct bpf_prog_type_list
There's no need to have struct bpf_prog_type_list since
it just contains a list_head, the type, and the ops
pointer. Since the types are densely packed and not
actually dynamically registered, it's much easier and
smaller to have an array of type->ops pointer. Also
initialize this array statically to remove code needed
to initialize it.
In order to save duplicating the list, move it to a new
header file and include it in the places needing it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 11 Apr 2017 18:36:28 +0000 (14:36 -0400)]
Merge branch 'fec-driver-code-clean'
Fugang Duan says:
====================
net: fec: driver code clean
The patch series are for fec ethernet driver code clean up, each patch is
independent.
Patch #1,#4,#5 are code clean up.
Patch #2,#3 are for aarch64 platform.
Patch #6 is for i.MX6UL to add lost errata workaround.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fugang Duan [Tue, 11 Apr 2017 11:13:08 +0000 (19:13 +0800)]
net: fec: add ERR007885 for i.MX6ul enet IP
The errata ERR007885 HW fix don't add to i.MX6ul ENET IP version,
so add sw workaroud for the chip.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fugang Duan [Tue, 11 Apr 2017 11:13:07 +0000 (19:13 +0800)]
net: fec: correct the errata number comment typo
Correct the errata number ERR006358 comment typo.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fugang Duan [Tue, 11 Apr 2017 11:13:06 +0000 (19:13 +0800)]
net: fec: add phy-reset-gpios PROBE_DEFER check
Many boards use i2c/spi expander gpio as phy-reset-gpios and these
gpios maybe registered after fec port, driver should check the return
value of .of_get_named_gpio().
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fugang Duan [Tue, 11 Apr 2017 11:13:05 +0000 (19:13 +0800)]
net: fec: pass ->dev to dma_alloc__coherent() API
In aarch64 system, it requires to trasfer ->dev to dma_alloc_coherent()
API, otherwise allocate failed and print kernel warning.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fugang Duan [Tue, 11 Apr 2017 11:13:04 +0000 (19:13 +0800)]
net: fec: avoid BD pointer type cast to 32bit
In aarch64 system, the BD pointer is 64bit, and the high-order 32-bits
of the address is effective, so replace usigned with (void *) type to
aovid 64bit address is casted to 32bit in .fec_enet_get_nextdesc() and
.fec_enet_get_prevdesc() functions.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fugang Duan [Tue, 11 Apr 2017 11:13:03 +0000 (19:13 +0800)]
net: fec: add return value check after calling .of_property_read_u32()
Add return value check after calling .of_property_read_u32() to avoid
the warning reported by coverity.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 11 Apr 2017 17:48:10 +0000 (13:48 -0400)]
Merge branch 'l2tp-drop-l2tp_session_find'
Guillaume Nault says:
====================
l2tp: drop l2tp_session_find()
l2tp_netlink is the last user of l2tp_session_find(), but that call is
useless. Let's remove it and drop l2tp_session_find() definitely.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Tue, 11 Apr 2017 11:12:21 +0000 (13:12 +0200)]
l2tp: remove l2tp_session_find()
This function isn't used anymore.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Tue, 11 Apr 2017 11:12:13 +0000 (13:12 +0200)]
l2tp: remove useless duplicate session detection in l2tp_netlink
There's no point in checking for duplicate sessions at the beginning of
l2tp_nl_cmd_session_create(); the ->session_create() callbacks already
return -EEXIST when the session already exists.
Furthermore, even if l2tp_session_find() returns NULL, a new session
might be created right after the test. So relying on ->session_create()
to avoid duplicate session is the only sane behaviour.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 11 Apr 2017 15:16:04 +0000 (11:16 -0400)]
Merge branch 'net-remove-pci_enable_msix'
Christoph Hellwig says:
====================
remove pci_enable_msix() V3
this series removes the remaining callers of the pci_enable_msix()
function and then the function itself. The final removal has been
Acked by Bjorn.
Changes since V2:
- add another patch on Dave's request
- add various acks
- spelling fixes in the commit logs
Changes since V1:
- replace the two previous thunderx patches with a new one from Thanneeru
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Hellwig [Tue, 11 Apr 2017 11:01:25 +0000 (13:01 +0200)]
mlxsw: convert to pci_alloc_irq_vectors
Trivial conversion as only one vector is supported, but at least we
lose the useless msix_entry member in the per-device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Hellwig [Tue, 11 Apr 2017 11:01:24 +0000 (13:01 +0200)]
PCI: remove pci_enable_msix
Unused now that all callers switched to pci_alloc_irq_vectors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thanneeru Srinivasulu [Tue, 11 Apr 2017 11:01:23 +0000 (13:01 +0200)]
net: thunderx: Switch to pci_alloc_irq_vectors
Remove deprecated pci_enable_msix API in favour of its
successor pci_alloc_irq_vectors.
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Hellwig [Tue, 11 Apr 2017 11:01:22 +0000 (13:01 +0200)]
net/ena: switch to pci_alloc_irq_vectors
Remove the deprecated pci_enable_msix API in favour of its successor.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Hellwig [Tue, 11 Apr 2017 11:01:21 +0000 (13:01 +0200)]
net: alx: switch to pci_alloc_irq_vectors
Remove the deprecated pci_enable_msix API in favour of its successor,
and make sure to handle errors during IRQ setup properly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 11 Apr 2017 14:10:30 +0000 (10:10 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-04-11
1) Remove unused field from struct xfrm_mgr.
2) Code size optimizations for the xfrm prefix hash and
address match.
3) Branch optimization for addr4_match.
All patches from Alexey Dobriyan.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 10 Apr 2017 20:03:59 +0000 (16:03 -0400)]
Merge branch 'ftgmac100-rework-batch3-tx-path'
Benjamin Herrenschmidt says:
====================
ftgmac100: Rework batch 3 - TX path
This is version 2 of the third batch of updates to
the ftgmac100 driver.
This one tackles the TX path of the driver. This provides the
bulk of the performance improvements by adding support for
fragmented sends along with a bunch of cleanups.
Version 2 fixes a patch splitting mistake and uses
eth_skb_pad() (which uses skb_put_padto) to pad ethernet
frames rather than skb_padto(), thus removing the need to
also pad the packet headlen in a couple of places.
Subsequent batches will add various features (ethtool functions,
vlan offlan, ...) and cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:26 +0000 (11:15 +1000)]
ftgmac100: Remove tx descriptor accessors
Directly access the fields when needed. The accessors add clutter
not clarity and in some cases cause unnecessary read-modify-write
type access on the slow (uncached) descriptor memory.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:25 +0000 (11:15 +1000)]
ftgmac100: Add support for fragmented tx
Add NETIF_F_SG and create multiple TX ring entries for skb fragments.
On reclaim, the skb is only freed on the segment marked as "last".
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:24 +0000 (11:15 +1000)]
ftgmac100: Don't clear tx desc fields unnecessarily
Those are non-cachable stores, let's avoid those we don't need. Remove
the helper, it's not particularly helpful and since it uses "priv"
I can't move it to the header file.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:23 +0000 (11:15 +1000)]
ftgmac100: Split tx packet freeing from ftgmac100_tx_complete_packet()
This moves the packet freeing to a separate function
which is also used by ftgmac100_free_buffers() and will
be used more in the error path of fragmented sends.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:22 +0000 (11:15 +1000)]
ftgmac100: Move the barrier out of ftgmac100_txdes_set_dma_own()
We'll use variants of this accessor without barriers when
building series of descriptors for fragmented sends
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:21 +0000 (11:15 +1000)]
ftgmac100: Cleanup tx queue handling
We have a private lock which isn't terribly useful, and we maintain
a "tx_pending" counter for information that's already available
via a trivial arithmetic operation. Then we unconditionaly wake
the queue even when not stopped. Finally our code in tx isn't
really safe vs. a concurrent reclaim. The aspeed chips aren't SMP
today but I prefer the code being right and future proof.
So rip that out and replace it with more "standard" queue handling,
currently with a threshold of 1 queue element, which will be
increased when we implement fragmented sends.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:20 +0000 (11:15 +1000)]
ftgmac100: Store tx skbs in a separate array
Rather than in the descriptor. The descriptor is mapped non-cachable
and rather slow to access.
Since to do that we need to keep track of the tx "pointer" we also
have no use of all the accesors to manipulate it, just open code
it, it's as clear and will help when adding fragmented sends.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:19 +0000 (11:15 +1000)]
ftgmac100: Pad small frames properly
Rather than just transmitting garbage past the end of the small
packet.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:18 +0000 (11:15 +1000)]
ftgmac100: Factor tx packet dropping path
Use a simple goto to a drop path at the tail of the function,
it will be used in a few more cases soon
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:17 +0000 (11:15 +1000)]
ftgmac100: Merge ftgmac100_xmit() into ftgmac100_hard_start_xmit()
This will make subsequent rework of the tx path simpler
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:16 +0000 (11:15 +1000)]
ftgmac100: Move ftgmac100_hard_start_xmit() around
Move it below ftgmac100_xmit() and the rest of the tx path
No code change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Herrenschmidt [Mon, 10 Apr 2017 01:15:15 +0000 (11:15 +1000)]
ftgmac100: Add a tx timeout handler
We have a reset task to reset our chip, use it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 8 Apr 2017 15:52:02 +0000 (08:52 -0700)]
net: dsa: mt7530: Include gpio/consumer.h for GPIO functions
Fixes build errors seen with CONFIG_GPIOLIB disabled and warnings enabled:
drivers/net/dsa/mt7530.c: In function 'mt7530_setup':
drivers/net/dsa/mt7530.c:948:3: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(priv->reset, 0);
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mt7530.c: In function 'mt7530_probe':
drivers/net/dsa/mt7530.c:1068:17: error: implicit declaration of function 'devm_gpiod_get_optional' [-Werror=implicit-function-declaration]
priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
^~~~~~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mt7530.c:1069:13: error: 'GPIOD_OUT_LOW' undeclared (first use in this function)
GPIOD_OUT_LOW);
^~~~~~~~~~~~~
drivers/net/dsa/mt7530.c:1069:13:
Fixes:
b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Alemayhu [Sat, 8 Apr 2017 20:08:10 +0000 (22:08 +0200)]
bpf: fix comment typo
o s/bpf_bpf_get_socket_cookie/bpf_get_socket_cookie
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Fri, 7 Apr 2017 18:41:19 +0000 (14:41 -0400)]
netvsc: use napi_consume_skb
This allows using deferred skb freeing and with NAPI. And get buffer
recycling.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 10 Apr 2017 01:13:12 +0000 (18:13 -0700)]
Merge tag 'wireless-drivers-next-for-davem-2017-04-07' of git://git./linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.12
Lots of bugfixes as usual but also some new features.
Major changes:
ath10k
* improve firmware download time for QCA6174 and QCA9377, especially
helps resume time
ath9k_htc
* add support AirTies 1eda:2315 AR9271 device
rt2x00
* add support MT7620
mwifiex
* enable auto deep sleep mode for USB chipsets
brcmfmac
* add support for network namespaces (WIPHY_FLAG_NETNS_OK)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 9 Apr 2017 21:45:21 +0000 (14:45 -0700)]
Revert "rtnl: Add support for netdev event to link messages"
This reverts commit
def12888c161e6fec0702e5ec9c3962846e3a21d.
As per discussion between Roopa Prabhu and David Ahern, it is
advisable that we instead have the code collect the setlink triggered
events into a bitmask emitted in the IFLA_EVENT netlink attribute.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 9 Apr 2017 20:41:06 +0000 (13:41 -0700)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2017-04-08
This series contains updates to i40e and i40evf only.
Mitch fixes an issue where the client driver (i40iw) was attempting to
load on x710 devices (which do not support iWARP), so only register with
the client if iWARP is supported.
Jake fixes up error messages to better clarify to the user when adding a
invalid flow type. Updates the driver to look up the MAC address from
eth_get_platform_mac_address() first before checking what the firmware
provides. Cleans up code so we are not repeating a duplicate loop, by
checking both transmit and receive queues in a single loop. Also cleans
up flags never used, so remove the definitions.
Alex does cleanup so that we are always updating pf->flags when a change
is made to the private flags. Adds support for 3K buffers to the receive
path so that we can provide the additional padding needed in the event
of NET_IP_ALIGN being non-zero or a cache line being greater than 64.
Adds support for build_skb() to i40e/i40evf.
Maciej adjusts the scope of the rtnl lock held during reset because it
was stopping other PFs from running their reset procedures.
Alan reduces code complexity in i40e_detect_recover_hung_queue().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 8 Apr 2017 20:49:36 +0000 (13:49 -0700)]
Merge branch 'dsa-receive-path-simplifications'
Florian Fainelli says:
====================
net: dsa: Receive path simplifications
This patch series does factor the common code found in all tag implementations
into dsa_switch_rcv(). The original motivation was to add GRO support, but this
may be a lot of work with unclear benefits at this point.
Changes in v2:
- take care of tag_mtk.c in the process
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 8 Apr 2017 15:55:23 +0000 (08:55 -0700)]
net: dsa: Factor bottom tag receive functions
All DSA tag receive functions do strictly the same thing after they have located
the originating source port from their tag specific protocol:
- push ETH_HLEN bytes
- set pkt_type to PACKET_HOST
- call eth_type_trans()
- bump up counters
- call netif_receive_skb()
Factor all of that into dsa_switch_rcv(). This also makes us return a pointer to
a sk_buff, which makes us symetric with the xmit function.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 8 Apr 2017 15:55:22 +0000 (08:55 -0700)]
net: dsa: Move skb_unshare() to dsa_switch_rcv()
All DSA tag receive functions need to unshare the skb before mangling it, move
this to the generic dsa_switch_rcv() function which will allow us to make the
tag receive function return their mangled skb without caring about freeing a
NULL skb.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 8 Apr 2017 15:55:21 +0000 (08:55 -0700)]
net: dsa: Do not check for NULL dst in tag parsers
dsa_switch_rcv() already tests for dst == NULL, so there is no need to duplicate
the same check within the tag receive functions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Sat, 8 Apr 2017 18:36:24 +0000 (20:36 +0200)]
skbuff: Extend gso_type to unsigned int.
All available gso_type flags are currently in use, so
extend gso_type from 'unsigned short' to 'unsigned int'
to be able to add further flags.
We reorder the struct skb_shared_info to use
two bytes of the four byte hole before dataref.
All fields before dataref are cleared, i.e.
four bytes more than before the change.
The remaining two byte hole is moved to the
beginning of the structure, this protects us
from immediate overwites on out of bound writes
to the sk_buff head.
Structure layout on x86-64 before the change:
struct skb_shared_info {
unsigned char nr_frags; /* 0 1 */
__u8 tx_flags; /* 1 1 */
short unsigned int gso_size; /* 2 2 */
short unsigned int gso_segs; /* 4 2 */
short unsigned int gso_type; /* 6 2 */
struct sk_buff * frag_list; /* 8 8 */
struct skb_shared_hwtstamps hwtstamps; /* 16 8 */
u32 tskey; /* 24 4 */
__be32 ip6_frag_id; /* 28 4 */
atomic_t dataref; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
void * destructor_arg; /* 40 8 */
skb_frag_t frags[17]; /* 48 272 */
/* --- cacheline 5 boundary (320 bytes) --- */
/* size: 320, cachelines: 5, members: 12 */
/* sum members: 316, holes: 1, sum holes: 4 */
};
Structure layout on x86-64 after the change:
struct skb_shared_info {
short unsigned int _unused; /* 0 2 */
unsigned char nr_frags; /* 2 1 */
__u8 tx_flags; /* 3 1 */
short unsigned int gso_size; /* 4 2 */
short unsigned int gso_segs; /* 6 2 */
struct sk_buff * frag_list; /* 8 8 */
struct skb_shared_hwtstamps hwtstamps; /* 16 8 */
unsigned int gso_type; /* 24 4 */
u32 tskey; /* 28 4 */
__be32 ip6_frag_id; /* 32 4 */
atomic_t dataref; /* 36 4 */
void * destructor_arg; /* 40 8 */
skb_frag_t frags[17]; /* 48 272 */
/* --- cacheline 5 boundary (320 bytes) --- */
/* size: 320, cachelines: 5, members: 13 */
};
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Manlunas [Fri, 7 Apr 2017 02:22:22 +0000 (19:22 -0700)]
liquidio: fix VF incorrectly indicating that it successfully set its VLAN
For security reasons, NIC firmware does not allow VF to set its VLAN if PF
set it already. Firmware allows VF to set its VLAN if PF did not set it.
After the VF instructs the firmware to set the VLAN, VF always indicates
(via return 0) that the operation is successful--even for the times when it
isn't.
Put in a mechanism for the VF's set VLAN function to receive the firmware
response code, then make that function return -EPERM if the firmware
forbids the operation.
Make that mechanism available for other functions that may, in the future,
be interested in receiving the response code from the firmware. That
mechanism involves adding new fields to struct octnic_ctrl_pkt, so make all
users of struct octnic_ctrl_pkt initialize the struct to zero before using
it; otherwise, the mechanism might act on uninitialized garbage.
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
K. Y. Srinivasan [Thu, 6 Apr 2017 21:59:21 +0000 (14:59 -0700)]
netvsc: Initialize all channel related state prior to opening the channel
Prior to opening the channel we should have all the state setup to handle
interrupts. The current code does not do that; fix the bug. This bug
can result in faults in the interrupt path.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 6 Apr 2017 19:42:16 +0000 (12:42 -0700)]
net: dsa: mv88e6xxx: Make SMI c22/c45 read/write functions static
The SMI clause 22 & 45 read/write operations are local to the global2.c file,
so make them static. This eliminates the following warning:
drivers/net/dsa/mv88e6xxx/global2.c:571:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_read_c45' [-Wmissing-prototypes]
int mv88e6xxx_g2_smi_phy_read_c45(struct mv88e6xxx_chip *chip, int addr,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.c:602:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_read_c22' [-Wmissing-prototypes]
int mv88e6xxx_g2_smi_phy_read_c22(struct mv88e6xxx_chip *chip, int addr,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.c:635:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_write_c45' [-Wmissing-prototypes]
int mv88e6xxx_g2_smi_phy_write_c45(struct mv88e6xxx_chip *chip, int addr,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.c:664:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_write_c22' [-Wmissing-prototypes]
int mv88e6xxx_g2_smi_phy_write_c22(struct mv88e6xxx_chip *chip, int addr,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Thu, 6 Apr 2017 14:10:42 +0000 (16:10 +0200)]
netlink: uapi: use hex numbers for NLM_F_* flags
It's rather confusing that the netlink message flags are
numbered 1, 2, 4, 8, 16, 32, <unused>, 0x100. Make that
more understandable by numbering the lower ones with hex
constants as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 6 Apr 2017 12:54:35 +0000 (13:54 +0100)]
nfp: don't dereference a null nn->eth_port to print a warning
On the case where nn->eth_port is null the warning message
is printing the port by dereferencing this null pointer.
Remove the deference to avoid a crash when printing the
warning message.
Detected by CoverityScan, CID#
1426198 ("Dereference after null check")
Fixes:
ce22f5a2cbe3c627 ("nfp: separate high level and low level NSP headers")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 8 Apr 2017 15:07:02 +0000 (08:07 -0700)]
Merge branch 'net-SO_COOKIE'
Chenbo Feng says:
====================
New getsockopt option to retrieve socket cookie
In the current kernel socket cookie implementation, there is no simple
and direct way to retrieve the socket cookie based on file descriptor. A
process mat need to get it from sock fd if it want to correlate with
sock_diag output or use a bpf map with new socket cookie function.
If userspace wants to receive the socket cookie for a given socket fd,
it must send a SOCK_DIAG_BY_FAMILY dump request and look for the 5-tuple.
This is slow and can be ambiguous in the case of sockets that have the
same 5-tuple (e.g., tproxy / transparent sockets, SO_REUSEPORT sockets,
etc.).
As shown in the example program. The xt_eBPF program is using socket cookie
to record the network traffics statistics and with the socket cookie
retrieved by getsockopt. The program can directly access to a specific
socket data without scanning the whole bpf map.
====================
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chenbo Feng [Thu, 6 Apr 2017 02:00:56 +0000 (19:00 -0700)]
Sample program using SO_COOKIE
Added a per socket traffic monitoring option to illustrate the usage
of new getsockopt SO_COOKIE. The program is based on the socket traffic
monitoring program using xt_eBPF and in the new option the data entry
can be directly accessed using socket cookie. The cookie retrieved
allow us to lookup an element in the eBPF for a specific socket.
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chenbo Feng [Thu, 6 Apr 2017 02:00:55 +0000 (19:00 -0700)]
New getsockopt option to get socket cookie
Introduce a new getsockopt operation to retrieve the socket cookie
for a specific socket based on the socket fd. It returns a unique
non-decreasing cookie for each socket.
Tested: https://android-review.googlesource.com/#/c/358163/
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 8 Apr 2017 13:18:00 +0000 (06:18 -0700)]
Merge tag 'mlx5-updates-2017-04-16' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2017-04-16
This patchset provides some updates for the mlx5 drivers.
From Majd,
1st patch, Adds ConnectX-6 and ConnectX-6 VF PCI IDs support.
From Guy,
2nd patch, Adds RXFCS scatter support.
3rd patch, Small cleanup to make a function static.
From Eran,
4th patch, Adds 4 zeros padding to ethtool FW version.
6th patch, Trevial code reuse cleanup
From Inbar,
5th patch, Show board id in ethtool driver information
From Saeed,
7th patch, Set default RX moderation parameters on driver load
as a small fix for the latest fail-safe config feature.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 5 Apr 2017 11:51:03 +0000 (07:51 -0400)]
i40e/i40evf: Use build_skb to build frames
This patch is meant to improve the performance of the Rx path.
Specifically by using build_skb we have several distinct advantages.
In the case of small frames we were previously using a copy-break approach.
This means that we were allocating a page fragment to use for skb->head,
and were having to copy the packet into that region. Both of those calls
are now avoided since we just build the skb around the data.
In the case of large frames the gains are much more significant.
Specifically we were having to allocate skb->head, and copy the headers as
before. However in addition we were having to parse the header using
eth_get_headlen which could be quite expensive. All of this is avoided by
building the frame around the data. I have seen gains as high as 30% when
using VXLAN for instance due to just header pulling overhead.
Finally with all this in place it also sets us up to start looking at
enabling XDP. Specifically we now have a path in which the data is in the
page and the frame is built around it. So if we parse it with XDP before
we call build_skb we can take care of any necessary processing there.
Change-ID: Id4bdd618e94473d41f892417e5d8019639e421e3
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Wed, 5 Apr 2017 11:51:02 +0000 (07:51 -0400)]
i40e/i40evf: Add support for padding start of frames
This patch adds padding to the start of frames to make room for headroom
for us to eventually start using build_skb. Right now we guarantee at
least NET_SKB_PAD + NET_IP_ALIGN, however we allocate more space if more is
available. For example on x86 the headroom should be 192 bytes.
On systems that have too large of a cache line size to support storing 1.5K
padding and shared info we default to using 3K buffers and reserve
everything that isn't used for skb_shared_info or the data buffer for
headroom.
Change-ID: I33c641c9a1ea10cf7cc484c2d20985368d2d709a
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Wed, 5 Apr 2017 11:51:01 +0000 (07:51 -0400)]
i40e/i40evf: Add support for using order 1 pages with a 3K buffer
There are situations where adding padding to the front and back of an Rx
buffer will require that we add additional padding. Specifically if
NET_IP_ALIGN is non-zero, or the MTU size is larger than 7.5K we would need
to use 2K buffers which leaves us with no room for the padding.
To preemptively address these cases I am adding support for 3K buffers to
the Rx path so that we can provide the additional padding needed in the
event of NET_IP_ALIGN being non-zero or a cache line being greater than 64.
Change-ID: I938bc1ba611285428df39a613cd66f98e60b55c7
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Wed, 5 Apr 2017 11:51:00 +0000 (07:51 -0400)]
i40e: clean up historic deprecated flag definitions
Since an early commit a few flags have no longer
been used. Remove these definitions to reduce code clutter.
Change-ID: I3589be4622574e747013cd4dc403e18b039f4965
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alice Michael [Sat, 8 Apr 2017 06:01:35 +0000 (23:01 -0700)]
i40e: remove I40E_FLAG_NEED_LINK_UPDATE
The I40E_FLAG_NEED_LINK_UPDATE was never used. Remove the flag
definitions.
Change-ID: If59d0c6b4af85ca27281f3183c54b055adb439a4
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Wed, 5 Apr 2017 11:50:58 +0000 (07:50 -0400)]
i40e: remove extraneous loop in i40e_vsi_wait_queues_disabled
We can simply check both Tx and Rx queues in a single loop, rather than
repeating the loop twice.
Change-ID: Ic06f26b0e3c2620e0e33c1a2999edda488e647ad
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Wed, 5 Apr 2017 11:50:57 +0000 (07:50 -0400)]
i40e: allow look-up of MAC address from Open Firmware or IDPROM
Look up the MAC address from the eth_get_platform_mac_address() function
first before checking what the firmware provides. We already handle the
case of re-writing the MAC-VLAN filter, so there is no need to add extra
code for this. However, update the comment where we do this to indicate
that it does impact the Open Firmware MAC address case.
Change-ID: I73e59fbe0b0e7e6f3ee9f5170d0bd3a4d5faf4db
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alan Brady [Wed, 5 Apr 2017 11:50:56 +0000 (07:50 -0400)]
i40e: Simplify i40e_detect_recover_hung_queue logic
This patch greatly reduces the unneeded complexity in the
i40e_detect_recover_hung_queue code path. The previous implementation
set a 'hung bit' which would then get cleared while polling. If the
detection routine was called a second time with the bit already set, we
would issue a software interrupt. This patch makes it such that if
interrupts are disabled and we have pending TX descriptors, we trigger a
software interrupt since in, the worst case, queues are already clean
and we have an extra interrupt.
Additionally this patch removes the workaround for lost interrupts as
calling napi_reschedule in this context can cause software interrupts to
fire on the wrong CPU.
Change-ID: Iae108582a3ceb6229ed1d22e4ed6e69cf97aad8d
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Maciej Sosin [Wed, 5 Apr 2017 11:50:55 +0000 (07:50 -0400)]
i40e: Decrease the scope of rtnl lock
Previously rtnl lock was held during whole reset procedure that
was stopping other PFs running their reset procedures. In the result
reset was not handled properly and host reset was the only way
to recover.
Change-ID: I23c0771c0303caaa7bd64badbf0c667e25142954
Signed-off-by: Maciej Sosin <maciej.sosin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Wed, 5 Apr 2017 11:50:54 +0000 (07:50 -0400)]
i40e: Swap use of pf->flags and pf->hw_disabled_flags for ATR Eviction
This is a minor cleanup so that we are always updating pf->flags when we
make a change to the private flags instead of updating a mix of either
pf->flags and/or pf->hw_disabled_flags.
In addition I went through and cleaned out all the spots where we were
using the X722 define in regards to this flag.
Lastly since we changed the logic I went through and flushed out any
redundancy and cleaned up the handling of the flags in the Tx path.
Change-ID: I79ff95a7272bb2533251ff11ef91e89ccb80b610
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Wed, 5 Apr 2017 11:50:53 +0000 (07:50 -0400)]
i40e: update error message when trying to add invalid filters
Re-word the error message displayed when adding a filter with an
invalid flow type. Additionally, report a distinct error message when
the IPv4 protocol is at fault.
Change-ID: Iba3d85b87f8d383c97c8bdd180df34a6adf3ee67
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Tue, 4 Apr 2017 19:40:16 +0000 (12:40 -0700)]
i40e: only register client on iWarp-capable devices
The client interface is only intended for use on devices that support
iWarp. Only register with the client if this is the case.
This fixes a panic when loading i40iw on X710 devices.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Reported-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Thanneeru Srinivasulu [Thu, 6 Apr 2017 10:42:26 +0000 (16:12 +0530)]
net: thunderx: Enable TSO and checksum offloads for ipv6
Adding support for TSO and checksum hardware offloads for ipv6.
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 7 Apr 2017 20:52:23 +0000 (13:52 -0700)]
Merge branch 'dsa-mediatek-MT7530'
Sean Wang says:
====================
net-next: dsa: add Mediatek MT7530 support
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N which includes 7-port
Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports,
The port from 0 to 4 are the user ports connecting with the remote devices
while the port 5 and 6 are the CPU ports connecting into Mediatek Ethernet
GMAC.
The patch series integrated Mediatek MT7530 into DSA support which
includes the most of the essential callbacks such as tag insertion for
port distinguishing, port control, bridge offloading, STP setup and
ethtool operations to allow DSA to model each user port into independently
standalone netdevice as the other DSA driver had done.
Changes since v1:
- rebased into 4.11-rc1
- refined binding document including below five items
- changed the type of mediatek,mcm into bool
- used reset controller binding for MCM reset and removed "mediatek,ethsys"
property from binding
- reused CPU port's ethernet Phandle instead of creating new one and removed
"mediatek,ethernet" property from binding
- aligned naming for GPIO reset with dsa/marvell.txt
- added phy-mode as required property child nodes within ports container
- handled gpio reset with devm_gpiod_* API
- refined comment words
- removed condition for CDM setting since the setup looks both fine for all cases
- allowed of_find_net_device_by_node() working with pointing the device node into
real netdev instance
- fixed Kbuild warnings
Changes since v2:
- reuse readx_poll_timeout() to poll
- add proper macro instead of hard coding
- treat inconsistent cpu port as warning
- remove the usage for regmap-debugfs
- show error message when invalid id is found
- put the logic for the setup of trgmii into adjut_link()
- refine and reuse logic between port_[disable,enable], and default port setup
- correct typo
Changes since v3:
- used struct as the parameter for readx_poll_timeout() and kill
extra lpriv defined
- moved around function to get out of an additional declaration
- fixed kbuild errors caused by missing proper include in the latest tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Fri, 7 Apr 2017 08:45:09 +0000 (16:45 +0800)]
net-next: dsa: add dsa support for Mediatek MT7530 switch
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N platform which
includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY.
Among these ports, The port from 0 to 4 are the user ports connecting
with the remote devices while the port 5 and 6 are the CPU ports
connecting into Mediatek Ethernet GMAC.
For port 6, it can communicate with the CPU via Mediatek Ethernet GMAC
through either the TRGMII or RGMII which could be controlled by phy-mode
in the dt-bindings to specify which mode is preferred to use. And for
port 5, only RGMII can be specified. However, currently, only port 6 is
being supported in this DSA driver.
The driver is made with the reference to qca8k and other existing DSA
driver. The most of the essential callbacks of the DSA are already
support in the driver, including tag insert for user port distinguishing,
port control, bridge offloading, STP setup and ethtool operation to allow
DSA to model each user port into a standalone netdevice as the other DSA
driver had done.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Landen Chao <Landen.Chao@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Fri, 7 Apr 2017 08:45:08 +0000 (16:45 +0800)]
net-next: ethernet: mediatek: add device_node of GMAC pointing into the netdev instance
the patch adds the setup of the corresponding device node of GMAC into the
netdev instance which could allow other modules such as DSA to find the
instance through the node in dt-bindings using of_find_net_device_by_node()
call.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Fri, 7 Apr 2017 08:45:07 +0000 (16:45 +0800)]
net-next: ethernet: mediatek: add CDM able to recognize the tag for DSA
The patch adds the setup for allowing CDM can recognize these packets with
carrying port-distinguishing tag. Otherwise, these tagging packets will be
handled incorrectly by CDM. The setup is also working out for general
untag packets as well.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Landen Chao <Landen.Chao@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Fri, 7 Apr 2017 08:45:06 +0000 (16:45 +0800)]
net-next: dsa: add Mediatek tag RX/TX handler
Add the support for the 4-bytes tag for DSA port distinguishing inserted
allowing receiving and transmitting the packet via the particular port.
The tag is being added after the source MAC address in the ethernet
header.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Landen Chao <Landen.Chao@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Fri, 7 Apr 2017 08:45:05 +0000 (16:45 +0800)]
dt-bindings: net: dsa: add Mediatek MT7530 binding
Add device-tree binding for Mediatek MT7530 switch.
Cc: devicetree@vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Larysch [Fri, 7 Apr 2017 12:42:20 +0000 (14:42 +0200)]
net: ipv4: fix multipath RTM_GETROUTE behavior when iif is given
inet_rtm_getroute synthesizes a skeletal ICMP skb, which is passed to
ip_route_input when iif is given. If a multipath route is present for
the designated destination, fib_multipath_hash ends up being called with
that skb. However, as that skb contains no information beyond the
protocol type, the calculated hash does not match the one we would see
for a real packet.
There is currently no way to fix this for layer 4 hashing, as
RTM_GETROUTE doesn't have the necessary information to create layer 4
headers. To fix this for layer 3 hashing, set appropriate saddr/daddrs
in the skb and also change the protocol to UDP to avoid special
treatment for ICMP.
Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 7 Apr 2017 14:18:28 +0000 (07:18 -0700)]
Merge branch 'stmmac-multiple-buffers'
Joao Pinto says:
====================
net: stmmac: adding multiple buffers
This patch adds multiple buffers to stmmac in a more fragmented
way, in order to make problem debug easier.
I would kindly request to people to test this patch in their HWs in
order to check if everything's functional. Thank you.
====================
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Thu, 6 Apr 2017 08:49:11 +0000 (09:49 +0100)]
net: stmmac: adding multiple napi mechanism
This patch adds the napi variable to the stmmac_rx_queue
structure and forces that operations like netif_queue_stopped,
netif_wake_queue, netif_stop_queue, netdev_reset_queue and
netdev_sent_queue be made by queue.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Thu, 6 Apr 2017 08:49:10 +0000 (09:49 +0100)]
net: stmmac: adding multiple buffers for TX
This patch adds the structure stmmac_tx_queue which contains
tx queues specific data (previously in stmmac_priv).
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Thu, 6 Apr 2017 08:49:09 +0000 (09:49 +0100)]
net: stmmac: adding multiple buffers for rx
This patch adds the structure stmmac_rx_queue which contains
rx queues specific data (previously in stmmac_priv).
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Thu, 6 Apr 2017 08:49:08 +0000 (09:49 +0100)]
net: stmmac: break some functions into RX and TX scopes
This patch breaks several functions into RX and TX scopes, which
will be useful when adding multiple buffers mechanism.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 7 Apr 2017 14:03:35 +0000 (07:03 -0700)]
Merge branch 'net_device_stats'
Tobias Klauser says:
====================
Use net_device_stats from struct net_device
Along the lines of previous patches, switch (almost) all remaining net
drivers to use net_device_stats from net_device instead of including a
copy of it in their netdev_priv struct.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:39 +0000 (10:17 +0200)]
usbnet: pegasus: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
pegasus, use stats from struct net_device. Also remove the now
unnecessary .ndo_get_stats function.
Cc: Petko Manolov <petkan@nucleusys.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:38 +0000 (10:17 +0200)]
usbnet: kaweth: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
kaweth_device, use stats from struct net_device. Also remove the now
unnecessary .ndo_get_stats function.
Cc: linux-usb@vger.kernel.org
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:37 +0000 (10:17 +0200)]
net: typhoon: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
typhoon, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:36 +0000 (10:17 +0200)]
net: tulip: de2104x: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
de_private, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:35 +0000 (10:17 +0200)]
net: sunhme: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
happy_meal, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:34 +0000 (10:17 +0200)]
net: sunbmac: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
bigmac, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:33 +0000 (10:17 +0200)]
net: nuvoton: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in
struct w90p910_ether, use stats from struct net_device. Also remove
the now unnecessary .ndo_get_stats function.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:32 +0000 (10:17 +0200)]
net: nmlan_cs: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
_mace_private, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:31 +0000 (10:17 +0200)]
net: moxa: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
moxart_mac_priv_t, use stats from struct net_device. Also remove the now
unnecessary .ndo_get_stats function.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:30 +0000 (10:17 +0200)]
net: macb: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
macb, use stats from struct net_device.
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:29 +0000 (10:17 +0200)]
net: emac: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in
struct emac_instance, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:28 +0000 (10:17 +0200)]
net: dl2k: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
netdev_private, use stats from struct net_device. Also remove the now
unnecessary .ndo_get_stats function and the #ifdef'ed increment of the
collisions16 counter which doesn't exist in struct net_device_stats.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:27 +0000 (10:17 +0200)]
net: cxgb3: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in
struct port_info, use stats from struct net_device.
Cc: Santosh Raspatur <santosh@chelsio.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Fri, 7 Apr 2017 08:17:26 +0000 (10:17 +0200)]
net: cxgb: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
port_info, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 7 Apr 2017 13:26:15 +0000 (06:26 -0700)]
Merge branch 'qed-XDP-header-adjust'
Yuval Mintz says:
====================
qede: support XDP head adjustments
Daniel has brought to my attention the fact that qede is the only driver
that currently supports XDP but still fails any program where
xdp_adjust_head is set on the bpf_prog. This series is meant to remedy
this and align qede with the rest of the driver, making it possible to
remove said field.
Patch #1 contains a minor cache-saving optimization for latter patches.
Patches #2 & #3 address existing issues with the qede implementation
[#2 should have been a part of this as it addresses something that's
affected by the additional headroom; #3 is simply here for the ride].
Patches #4 & #5 add the necessary logic in driver for ingress headroom,
the first adding the infrastrucutre needed for supporting the headroon
[as currently qede doesn't support such], and the second removing the
existing XDP limitation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Fri, 7 Apr 2017 08:05:01 +0000 (11:05 +0300)]
qede: Support XDP adjustment of headers
In case an XDP program is attached, reserve XDP_PACKET_HEADROOM
bytes at the beginning of the packet for the program to play
with.
Modify the XDP logic in the driver to fill-in the missing bits
and re-calculate offsets and length after the program has finished
running to properly reflect the current status of the packet.
We can then go and remove the limitation of not supporting XDP programs
where xdp_adjust_head is set.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Fri, 7 Apr 2017 08:05:00 +0000 (11:05 +0300)]
qede: Add support for ingress headroom
Driver currently doesn't support any headroom; The only 'available'
space it has in the head of the buffer is due to the placement
offset.
In order to allow [later] support of XDP adjustment of headroom,
modify the the ingress flow to properly handle a scenario where
the packets would have such.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Fri, 7 Apr 2017 08:04:59 +0000 (11:04 +0300)]
qede: Prevent VFs from using XDP
Current implementation of VFs is very tight in regard to queue
resources. VFs support for XDP would require quite a bit of additional
infrastructure in qede and qed [sharing of queue-zones between queues,
more VF cids, mapping of the doorbell bar, etc.].
For now, prevent XDP programs from being attached to VFs.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Fri, 7 Apr 2017 08:04:58 +0000 (11:04 +0300)]
qede: Correct XDP forward unmapping
Driver is currently using dma_unmap_single() with the address it
passed to device for the purpose of forwarding, but the XDP
transmission buffer was originally a page allocated for the rx-queue.
The mapped address is likely to differ from the original mapped
address due to the placement offset.
This difference is going to get even bigger once we support headroom.
Cache the original mapped address of the page, and use it for unmapping
of the buffer when completion arrives for the XDP forwarded packet.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Fri, 7 Apr 2017 08:04:57 +0000 (11:04 +0300)]
qede: Update receive statistic once per NAPI
Currently, each time an ingress packet is passed to networking stack
the driver increments a per-queue SW statistic.
As we want to have additional fields in the first cache-line of the
Rx-queue struct, change flow so this statistic would be updated once per
NAPI run. We will later push the statistic to a different cache line.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 7 Apr 2017 12:52:52 +0000 (05:52 -0700)]
Merge branch 's390-next'
Ursula Braun says:
====================
s390 patches for net-next
here are some cleanup patches for drivers/s390/net.
V2: respin, now patch "s390/qeth: improve endianness handling"
is supposed to apply cleanly to net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hans Wippel [Fri, 7 Apr 2017 07:15:38 +0000 (09:15 +0200)]
s390/netiucv: improve endianness handling
Replace ntohs with endianness conversion for the SKB protocol assignment
to avoid an endianness warning reported by sparse. No functional change.
Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>