OSDN Git Service
Jiri Pirko [Wed, 3 Apr 2019 12:24:15 +0000 (14:24 +0200)]
net: devlink: convert devlink_port_attrs bools to bits
In order to save space in the struct, convert bools to bits.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Wed, 3 Apr 2019 10:49:24 +0000 (13:49 +0300)]
net: bridge: optimize backup_port fdb convergence
We can optimize the fdb convergence when a backup_port is present by not
immediately flushing the entries of the stopped port since traffic for
those entries will flow towards the backup_port.
There are 2 cases specifically that benefit most:
- when the stopped port comes up before the entries expire by themselves
- when there's an external entry refresh and they're kept while the
backup_port is operating (e.g. mlag)
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Shaia [Wed, 3 Apr 2019 09:15:07 +0000 (12:15 +0300)]
net: Remove inclusion of pci.h
This header is not in use - remove it.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 3 Apr 2019 07:54:09 +0000 (15:54 +0800)]
ibmvnic: remove set but not used variable 'netdev'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/ibm/ibmvnic.c: In function '__ibmvnic_reset':
drivers/net/ethernet/ibm/ibmvnic.c:1971:21: warning: variable 'netdev' set but not used [-Wunused-but-set-variable]
It's never used since introduction in
commit
ed651a10875f ("ibmvnic: Updated reset handling")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 3 Apr 2019 07:52:08 +0000 (15:52 +0800)]
ehea: remove set but not used variables 'epa' and 'cq_handle_ref'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/ibm/ehea/ehea_qmr.c: In function 'ehea_create_cq':
drivers/net/ethernet/ibm/ehea/ehea_qmr.c:127:7: warning: variable 'cq_handle_ref' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/ibm/ehea/ehea_qmr.c:126:15: warning: variable 'epa' set but not used [-Wunused-but-set-variable]
They are never used since commit
7a291083225a ("[PATCH] ehea: IBM eHEA Ethernet Device Driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 3 Apr 2019 07:50:27 +0000 (15:50 +0800)]
net: pasemi: remove set but not used variable 'cpyhdr'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/pasemi/pasemi_mac.c: In function 'pasemi_mac_queue_csdesc':
drivers/net/ethernet/pasemi/pasemi_mac.c:1358:29: warning: variable 'cpyhdr' set but not used [-Wunused-but-set-variable]
It's never used since commit
8d636d8bc5ff ("pasemi_mac: jumbo
frame support") and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 3 Apr 2019 07:47:59 +0000 (15:47 +0800)]
ehea: Fix a copy-paste err in ehea_init_port_res
pr->tx_bytes should be assigned to tx_bytes other than
rx_bytes.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
ce45b873028f ("ehea: Fixing statistics")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Wed, 3 Apr 2019 06:28:35 +0000 (08:28 +0200)]
net: use correct this_cpu primitive in dev_recursion_level
syzbot reports:
BUG: using __this_cpu_read() in preemptible code:
caller is dev_recursion_level include/linux/netdevice.h:3052 [inline]
__this_cpu_preempt_check+0x246/0x270 lib/smp_processor_id.c:47
dev_recursion_level include/linux/netdevice.h:3052 [inline]
ip6_skb_dst_mtu include/net/ip6_route.h:245 [inline]
I erronously downgraded a this_cpu_read to __this_cpu_read when
moving dev_recursion_level() around.
Reported-by: syzbot+51471b4aae195285a4a3@syzkaller.appspotmail.com
Fixes:
97cdcf37b57e ("net: place xmit recursion in softnet data")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hoang Le [Wed, 3 Apr 2019 06:05:04 +0000 (13:05 +0700)]
tipc: add NULL pointer check
skb somehow dequeued out of inputq before processing, it causes to
NULL pointer and kernel crashed.
Add checking skb valid before using.
Fixes:
c55c8edafa9 ("tipc: smooth change between replicast and broadcast")
Reported-by: Tuong Lien Tong <tuong.t.lien@dektech.com.au>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Tue, 2 Apr 2019 22:53:20 +0000 (23:53 +0100)]
net: sched: ensure tc flower reoffload takes filter ref
Recent changes to TC flower remove the requirement for rtnl lock when
accessing and modifying filters. Refcounts now ensure access and deletion
do not happen concurrently. However, the reoffload function which cycles
through all filters and replays them to registered hw drivers is not
protected.
Use the fl_get_next_filter() function to cycle the filters for reoffload
and ensure the ref taken by this function is put when done with each
filter.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Thu, 4 Apr 2019 11:56:38 +0000 (13:56 +0200)]
net: bridge: update multicast stats from maybe_deliver()
Simplify this code by updating bridge multicast stats from
maybe_deliver().
Note that commit
6db6f0eae605 ("bridge: multicast to unicast"), in case
the port flag BR_MULTICAST_TO_UNICAST is set, never updates the previous
port pointer, therefore it is always going to be different from the
existing port in this deduplicated list iteration.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Thu, 4 Apr 2019 11:54:20 +0000 (13:54 +0200)]
net: use kfree_skb_list() from ip_do_fragment()
Just like
46cfd725c377 ("net: use kfree_skb_list() helper in more places").
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 4 Apr 2019 17:20:39 +0000 (10:20 -0700)]
Merge branch 'hnx3-next'
Huazhong Tan says:
====================
code optimizations & bugfixes for HNS3 driver
This patchset includes bugfixes and code optimizations for
the HNS3 ethernet controller driver.
Change log:
V1->V2: fixes comments from Sergei Shtylyov
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 4 Apr 2019 08:17:59 +0000 (16:17 +0800)]
net: hns3: split function hnae3_match_n_instantiate()
The function hnae3_match_n_instantiate() was called both by
initializing or uninitializing client. For uninitializing, the
return value was never used.
To make it more clear, this patch splits it to two functions,
hnae3_init_client_instance() and hnae3_uninit_client_instance().
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 4 Apr 2019 08:17:58 +0000 (16:17 +0800)]
net: hns3: modify HNS3_NIC_STATE_INITED flag in hns3_reset_notify_uninit_enet
In the hns3_reset_notify_uninit_enet() HNS3_NIC_STATE_INITED flag
should be checked and cleared firstly.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 4 Apr 2019 08:17:57 +0000 (16:17 +0800)]
net: hns3: prevent change MTU when resetting
When resetting, the changing of MTU is not allowed, so this patch
adds checking reset status in hns3_nic_change_mtu() to do that.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 4 Apr 2019 08:17:56 +0000 (16:17 +0800)]
net: hns3: check resetting status in hns3_get_stats()
hns3_get_stats() should check the resetting status firstly,
since the device will be reinitialized when resetting. If the
reset has not completed, the hns3_get_stats() may access
invalid memory.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 4 Apr 2019 08:17:55 +0000 (16:17 +0800)]
net: hns3: add protect when handling mac addr list
It used netdev->uc and netdev->mc list in function
hns3_recover_hw_addr() and hns3_remove_hw_addr().
We should add protect for them.
Fixes:
f05e21097121 ("net: hns3: Clear mac vlan table entries when unload driver or function reset")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 4 Apr 2019 08:17:54 +0000 (16:17 +0800)]
net: hns3: simplify hclgevf_cmd_csq_clean
csq is used as a ring buffer, the value of the desc will be replaced
in next use. This patch removes the unnecessary memset, and just
updates the next_to_clean.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Thu, 4 Apr 2019 08:17:53 +0000 (16:17 +0800)]
net: hns3: minor optimization for datapath
This patch adds a likely case for hns3_fill_desc and
limits the local variables' scope as much as possible,
also avoid div operation when the tqp_vector->num_tqps
is one.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Thu, 4 Apr 2019 08:17:52 +0000 (16:17 +0800)]
net: hns3: minor optimization for ring_space
This patch optimizes the ring_space by calculating the
ring space without calling ring_dist.
Also ring_dist is only used by ring_space, so this patch
removes it when it is no longer used.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Thu, 4 Apr 2019 08:17:51 +0000 (16:17 +0800)]
net: hns3: return 0 and print warning when hit duplicate MAC
When set 2 same MAC to different function of one port, IMP
will return error as the later one may modify the origin one.
This will cause bond fail for 2 VFs of one port.
Driver just print warning and return 0 with this patch, so
if set same MAC address, it will return 0 but do not really
configure HW.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
liuzhongzhu [Thu, 4 Apr 2019 08:17:50 +0000 (16:17 +0800)]
net: hns3: modify the VF network port media type acquisition method
Method for obtaining the media type of the VF network port periodically,
regular tasks will not run until the network port UP. When the network
port is DOWN, the network port cannot obtain the media type.
Modifies the media type obtained when initializing the VF network port.
Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 4 Apr 2019 08:17:49 +0000 (16:17 +0800)]
net: hns3: reduce resources use in kdump kernel
When the kdump kernel started, the HNS3 driver fail to register:
[14.753340] hns3 0000:7d:00.0: Alloc umv space failed, want 512, get 0
[14.795034] hns3 0000:7d:00.0: add uc mac address fail, ret =-22.
By default, the HNS3 driver will use about 512M memory, but
usually the reserved memory of kdump kernel is 576M, so the HNS3
driver fail to register. This patch reduces the memory use in
kdump kernel to about 16M.
And when the kdump kernel starts, we must clear ucast mac address
first to avoid add fail.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Thu, 4 Apr 2019 08:17:48 +0000 (16:17 +0800)]
net: hns3: check 1000M half for hns3_ethtool_ops.set_link_ksettings
Hip08 SOC does not support 1000M half, this patch adds 1000M half
check for hns3_ethtool_ops.set_link_ksettings, so the user can not
set 1000M half by ethtool.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 4 Apr 2019 04:50:20 +0000 (21:50 -0700)]
Merge branch 'net-More-movement-to-fib_nh_common'
David Ahern says:
====================
net: More movement to fib_nh_common
Second set of three with the end goal of enabling IPv6 gateways with IPv4
routes.
This set moves:
- the ipv4 tracepoint to take a fib_nh_common and updates it to handle
a v6 gateway.
- consolidates route notifications to use the same fill functions
for both ipv4 and ipv6
v4
- enhanced the commit message for patches 1 and 2
v3
- comments from Martin:
+ renamed FIB_RES_NH to FIB_RES_NHC
+ removed family check from fib_result_prefsrc
+ in fib_nexthop_info, renamed nexthop arg to nhc and dropped for_ipv4 arg
v2
- dropped patches moving cached routes and exception buckets to
fib_nh_common. The goal is allowing a fib6_nh to be used with an
IPv4 route. The hold up is the need for separate exception buckets -
one for v6 routes and one for v4 routes. When all of the nexthop patches
are in, adding a secondi exception bucket pushes IPv6 fib6_info
allocations over 256 which means fib6_info allocations roll up to 512.
Hence, deferring the patches until some data mining can be done to keep
the allocations at 256.
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 2 Apr 2019 21:11:58 +0000 (14:11 -0700)]
ipv6: Flip to fib_nexthop_info
Export fib_nexthop_info and fib_add_nexthop for use by IPv6 code.
Remove rt6_nexthop_info and rt6_add_nexthop in favor of the IPv4
versions. Update fib_nexthop_info for IPv6 linkdown check and
RTA_GATEWAY for AF_INET6.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 2 Apr 2019 21:11:57 +0000 (14:11 -0700)]
ipv4: Change fib_nexthop_info and fib_add_nexthop to take fib_nh_common
With the exception of the nexthop weight, the nexthop attributes used by
fib_nexthop_info and fib_add_nexthop come from the fib_nh_common struct.
Update both to use it and change fib_nexthop_info to check the family
as needed.
nexthop weight comes from the common struct for existing use cases, but
for nexthop groups the weight is outside of the fib_nh_common to allow
the same nexthop definition to be used in multiple groups with different
weights.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 2 Apr 2019 21:11:56 +0000 (14:11 -0700)]
ipv4: Refactor nexthop attributes in fib_dump_info
Similar to ipv6, move addition of nexthop attributes to dump
message into helpers that are called for both single path and
multipath routes. Align the new helpers to the IPv6 variant
which most notably means computing the flags argument based on
settings in nh_flags.
The RTA_FLOW argument is unique to IPv4, so it is appended after
the new fib_nexthop_info helper. The intent of a later patch is to
make both fib_nexthop_info and fib_add_nexthop usable for both IPv4
and IPv6. This patch is stepping stone in that direction.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 2 Apr 2019 21:11:55 +0000 (14:11 -0700)]
ipv4: Add fib_nh_common to fib_result
Most of the ipv4 code only needs data from fib_nh_common. Add
fib_nh_common selection to fib_result and update users to use it.
Right now, fib_nh_common in fib_result will point to a fib_nh struct
that is embedded within a fib_info:
fib_info --> fib_nh
fib_nh
...
fib_nh
^
fib_result->nhc ----+
Later, nhc can point to a fib_nh within a nexthop struct:
fib_info --> nexthop --> fib_nh
^
fib_result->nhc ---------------+
or for a nexthop group:
fib_info --> nexthop --> nexthop --> fib_nh
nexthop --> fib_nh
...
nexthop --> fib_nh
^
fib_result->nhc ---------------------------+
In all cases nhsel within fib_result will point to which leg in the
multipath route is used.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 2 Apr 2019 21:11:54 +0000 (14:11 -0700)]
ipv4: Update fib_table_lookup tracepoint to take common nexthop
Update fib_table_lookup tracepoint to take a fib_nh_common struct and
dump the v6 gateway address if the nexthop uses it.
Over the years saddr has not proven useful and the output of the
tracepoint produces very long lines. Since saddr is not part of
fib_nh_common, drop it. If it needs to be added later, fib_nh which
contains saddr can be obtained from a fib_nh_common via container_of.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 2 Apr 2019 18:43:30 +0000 (20:43 +0200)]
net: phy: fix autoneg mismatch case in genphy_read_status
The original patch didn't consider the case that autoneg process
finishes successfully but both link partners have no mode in common.
In this case there's no link, nevertheless we may be interested in
what the link partner advertised.
Like phydev->link we set phydev->autoneg_complete in
genphy_update_link() and use the stored value in genphy_read_status().
This way we don't have to read register BMSR again.
Fixes:
b6163f194c69 ("net: phy: improve genphy_read_status")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 4 Apr 2019 04:45:49 +0000 (21:45 -0700)]
Merge branch 'marvel10g-suspend-resume'
Antoine Tenart says:
====================
net: phy: marvell10g: implement suspend/resume callbacks
This series implements the suspend/resume callbacks in the marvell10g
PHY driver.
Thanks,
Antoine
Since v3:
- Use the new phy_set/clear_bits_mmd() instead of phy_modify_mmd().
- Use VEND2.f001.11 to power down the port instead of the per-mode
LPOWER.
Since v2:
- Removed the third patch, setting the PHY in low power by default, as
the change was controversial.
- Rebased on the latest net-next.
Since v1:
- Fixed a mix up in the patches where two implementations of the
suspend/resume callbacks were kept in the driver.
- Rebased on the latest net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Tue, 2 Apr 2019 13:10:29 +0000 (15:10 +0200)]
net: phy: marvell10g: add the suspend/resume callbacks for the 88x2210
When the 88x2110 PHY support was added, the suspend and resume callbacks
were forgotten. This patch adds them to the 88x2110 PHY callback
definition.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Tue, 2 Apr 2019 13:10:28 +0000 (15:10 +0200)]
net: phy: marvell10g: implement suspend/resume callbacks
This patch adds the suspend/resume callbacks for Marvell 10G PHYs. The
three PCS (base-t, base-r and 1000base-x) are set in low power (the PCS
are powered down) when the PHY isn't used.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Mon, 1 Apr 2019 20:34:49 +0000 (15:34 -0500)]
net: dsa: microchip: mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
drivers/net/dsa/microchip/ksz9477.c: In function ‘ksz9477_get_interface’:
drivers/net/dsa/microchip/ksz9477.c:1145:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (gbit)
^
drivers/net/dsa/microchip/ksz9477.c:1147:2: note: here
case 0:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Mon, 1 Apr 2019 19:39:31 +0000 (14:39 -0500)]
rxrpc: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
net/rxrpc/local_object.c: In function ‘rxrpc_open_socket’:
net/rxrpc/local_object.c:175:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (ret < 0) {
^
net/rxrpc/local_object.c:184:2: note: here
case AF_INET:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Currently, GCC is expecting to find the fall-through annotations
at the very bottom of the case and on its own line. That's why
I had to add the annotation, although the intentional fall-through
is already mentioned in a few lines above.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Mon, 1 Apr 2019 11:16:59 +0000 (14:16 +0300)]
net: sched: don't set tunnel for decap action
Action tunnel_key doesn't have a metadata/tunnel for release(decap) action.
Drivers do not dereference entry->tunnel pointer for that action type, so
this behavior doesn't result in a crash at the moment. However, this needs
to be corrected as a preparation for updating hardware offloads API to not
rely on rtnl lock, for which flow_action code will copy the tunnel data to
temporary buffer to prevent concurrent action overwrite from
invalidating/freeing it.
Fixes:
3a7b68617de7 ("cls_api: add translator to flow_action representation")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 2 Apr 2019 20:16:17 +0000 (13:16 -0700)]
Merge branch 'net-phy-improve-genphy_c45_read_lpa'
Heiner Kallweit says:
====================
net: phy: improve genphy_c45_read_lpa
This series improves genphy_c45_read_lpa:
- Use clause 45 standard register / bit to detect link partner autoneg
capability.
- Consider that lpa register values may be invalid if "autoneg complete"
bit isn't set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 31 Mar 2019 17:54:07 +0000 (19:54 +0200)]
net: phy: deal properly with autoneg incomplete in genphy_c45_read_lpa
The link partner advertisement registers are not guaranteed to contain
valid values if autoneg is incomplete. Therefore, if
MDIO_AN_STAT1_COMPLETE isn't set, let's clear all link partner
capability bits. This also avoids unnecessary register reads if link
is down and phylib is in polling mode.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 31 Mar 2019 17:52:51 +0000 (19:52 +0200)]
net: phy: use c45 standard to detect link partner autoneg capability
Currently mii_lpa_mod_linkmode_lpa_t() checks bit LPA_LPACK to detect
whether link partner supports autoneg. This doesn't work correctly at
least on Aquantia AQCS109 when it negotiates 1000Base-T2 mode.
The "link partner is autoneg-capable" bit as defined by clause 45 is
set however. Better let's switch in general to use the clause 45
standard for link partner autoneg detection.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 2 Apr 2019 20:09:56 +0000 (13:09 -0700)]
Merge branch 'genphy_read_abilities'
Heiner Kallweit says:
====================
net: phy: add and use new function genphy_read_abilities
Similar to genphy_c45_pma_read_abilities() add a function to dynamically
detect the abilities of a Clause 22 PHY. This is mainly copied from
genphy_config_init(). Main benefit is that PHY drivers no longer have
to specify whether they support GBit or not (provided they keep to
the C22 standard).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 27 Mar 2019 21:00:32 +0000 (22:00 +0100)]
net: phy: realtek: use genphy_read_abilities
Use new function genphy_read_abilities(). This allows to remove all
calls to genphy_config_init().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 27 Mar 2019 20:59:33 +0000 (21:59 +0100)]
net: phy: use genphy_read_abilities in genphy driver
Currently the genphy driver populates phydev->supported like this:
First all possible feature bits are set, then genphy_config_init()
reads the available features from the chip and remove all unsupported
features from phydev->supported. This can be simplified by using
genphy_read_abilities().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 27 Mar 2019 20:58:44 +0000 (21:58 +0100)]
net: phy: add genphy_read_abilities
Similar to genphy_c45_pma_read_abilities() add a function to dynamically
detect the abilities of a Clause 22 PHY. This is mainly copied from
genphy_config_init().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 2 Apr 2019 06:53:14 +0000 (09:53 +0300)]
openvswitch: use after free in __ovs_ct_free_action()
We free "ct_info->ct" and then use it on the next line when we pass it
to nf_ct_destroy_timeout(). This patch swaps the order to avoid the use
after free.
Fixes:
06bd2bdf19d2 ("openvswitch: Add timeout support to ct action")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maxwell [Tue, 2 Apr 2019 05:07:56 +0000 (16:07 +1100)]
tg3: allow ethtool -p to work for NICs in down state
Make tg3 behave like other drivers and let "ethtool -p" identify the
NIC even when it's in the DOWN state. Before this patch it would get an
error as follows if the NIC was down:
# ip link set down dev em4
# ethtool -p em4
Cannot identify NIC: Resource temporarily unavailable
With this patch ethtool identify works regardless of whether the NIC is up
or down as it does for other drivers.
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 1 Apr 2019 20:59:09 +0000 (22:59 +0200)]
macsec: add noinline tag to avoid a frame size warning
seen with debug config:
drivers/net/macsec.c: In function 'dump_secy':
drivers/net/macsec.c:2597: warning: the frame size of 2216 bytes is larger
than 2048 bytes [-Wframe-larger-than=]
just mark it with noinline_for_stack, this is netlink dump code.
v2: use 'static noinline_for_stack int' consistently
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 2 Apr 2019 01:35:02 +0000 (18:35 -0700)]
Merge branch 'xmit_more-softnet_data'
Florian Westphal says:
====================
net: move skb->xmit_more to percpu softnet data
Eric Dumazet mentioned we could place xmit_more hint in same
spot as device xmit recursion counter, instead of using
an sk_buff flag bit.
This series places xmit_recursion counter and xmit_more hint
in softnet data, filling a hole.
After this, skb->xmit_more is always zero. Drivers are converted
to use "netdev_xmit_more()" helper instead.
Last patch removes the skb->xmit_more flag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 1 Apr 2019 14:42:17 +0000 (16:42 +0200)]
drivers: net: aurora: use netdev_xmit_more helper
This is the last driver using always-0 skb->xmit_more.
Switch it to netdev_xmit_more and remove the now unused xmit_more flag
from sk_buff.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 1 Apr 2019 14:42:16 +0000 (16:42 +0200)]
drivers: net: sfc: use netdev_xmit_more helper
skb->xmit_more hint is now always 0, this switches the sfc driver to
use the netdev_xmit_more helper instead.
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 1 Apr 2019 14:42:15 +0000 (16:42 +0200)]
drivers: mellanox: use netdev_xmit_more() helper
skb->xmit_more hint is now always 0. This switches the mellanox drivers
to the netdev_xmit_more() helper.
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Boris Pismenny <borisp@mellanox.com>
Cc: Ilya Lesokhin <ilyal@mellanox.com>
Cc: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 1 Apr 2019 14:42:14 +0000 (16:42 +0200)]
net: move skb->xmit_more hint to softnet data
There are two reasons for this.
First, the xmit_more flag conceptually doesn't fit into the skb, as
xmit_more is not a property related to the skb.
Its only a hint to the driver that the stack is about to transmit another
packet immediately.
Second, it was only done this way to not have to pass another argument
to ndo_start_xmit().
We can place xmit_more in the softnet data, next to the device recursion.
The recursion counter is already written to on each transmit. The "more"
indicator is placed right next to it.
Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more
to check the "more packets coming" hint.
skb->xmit_more is retained (but always 0) to not cause build breakage.
This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/
conversions. Remaining drivers are converted in the next patches.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 1 Apr 2019 14:42:13 +0000 (16:42 +0200)]
net: place xmit recursion in softnet data
This fills a hole in softnet data, so no change in structure size.
Also prepares for xmit_more placement in the same spot;
skb->xmit_more will be removed in followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 31 Mar 2019 15:42:24 +0000 (17:42 +0200)]
net: phy: aquantia: add SGMII statistics
The AQR107 family has SGMII statistics counters. Let's expose them to
ethtool. To interpret the counters correctly one has to be aware that
rx on SGMII side is tx on ethernet side. The counters are populated
by the chip in 100Mbps/1Gbps mode only.
v2:
- add constant AQR107_SGMII_STAT_SZ
- add struct aqr107_priv to be prepared for more private data fields
- let aqr107_get_stat() return U64_MAX in case of an error
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 31 Mar 2019 09:03:02 +0000 (17:03 +0800)]
net: use rcu_dereference_protected to fetch sk_dst_cache in sk_destruct
As Eric noticed, in .sk_destruct, sk->sk_dst_cache update is prevented, and
no barrier is needed for this. So change to use rcu_dereference_protected()
instead of rcu_dereference_check() to fetch sk_dst_cache in there.
v1->v2:
- no change, repost after net-next is open.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 30 Mar 2019 09:22:45 +0000 (10:22 +0100)]
net: phy: improve genphy_read_status
This patch improves few aspects of genphy_read_status():
- Don't initialize lpagb, it's not needed.
- Move initializing phydev->speed et al before the if clause.
- In auto-neg case, skip populating lp_advertising if we
don't have a link. This avoids quite some unnecessary
MDIO reads in case of phylib polling mode.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 2 Apr 2019 01:05:13 +0000 (18:05 -0700)]
Merge branch 'nfp-flower-improvement-and-SFF-module-EEPROM'
Jakub Kicinski says:
====================
nfp: flower improvement and SFF module EEPROM
The first patch in this series from Pieter improves the
handling of mangle actions in TC flower offload. These
used to be sent down to the driver in groups, but after
Pablo N's patches they are split out causing suboptimal
expression.
The ramaining two patches from Dirk add support for reading
SFF module EEPROM data.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dirk van der Merwe [Sat, 30 Mar 2019 02:24:43 +0000 (19:24 -0700)]
nfp: implement ethtool get module EEPROM
Now that the NSP provides the ability to read from the SFF modules'
EEPROM, we can use this interface to implement the ethtool callback.
If the NSP only provides partial data, we log the event from within
the driver but pass a success code to ethtool to prevent it from
discarding the partial data.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dirk van der Merwe [Sat, 30 Mar 2019 02:24:42 +0000 (19:24 -0700)]
nfp: nsp: implement read SFF module EEPROM
The NSP now provides the ability to read from the SFF module EEPROM.
Note that even if an error occurs, the NSP may still provide some of the
data.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pieter Jansen van Vuuren [Sat, 30 Mar 2019 02:24:41 +0000 (19:24 -0700)]
nfp: flower: reduce action list size by coalescing mangle actions
With the introduction of flow_action_for_each pedit actions are no
longer grouped together, instead pedit actions are broken out per
32 byte word. This results in an inefficient use of the action list
that is pushed to hardware where each 32 byte word becomes its own
action. Therefore we combine groups of 32 byte word before sending
the action list to hardware.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 29 Mar 2019 20:09:27 +0000 (21:09 +0100)]
net: phy: aquantia: add suspend / resume callbacks for AQR107 family
Add suspend / resume callbacks for AQR107 family. Suspend powers down
the complete chip except MDIO and internal CPU.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Grygorii Strashko [Fri, 29 Mar 2019 15:58:34 +0000 (17:58 +0200)]
net: ethernet: ti: davinci_mdio: switch to readl/writel()
Switch to readl/writel() APIs, because this is recommended
API and the MDIO block is reused on Keystone 2 SoCs
where LE/BE modes are supported.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 1 Apr 2019 22:01:46 +0000 (15:01 -0700)]
Merge branch 'cxgb3-undefined-behaviour-and-use-struct_size'
Gustavo A. R. Silva says:
====================
cxgb3/l2t: Fix undefined behaviour and use struct_size() helper
This patchset aims to fix an undefined behaviour when using a zero-sized
array and, add the use of the struct_size() helper in kvzalloc().
You might consider the first patch in this series for stable.
More details in the commit logs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Fri, 29 Mar 2019 15:28:41 +0000 (10:28 -0500)]
cxgb3/l2t: Use struct_size() in kvzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kvzalloc(size, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL);
Notice that, in this case, variable size is not necessary, hence
it is removed.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Fri, 29 Mar 2019 15:27:26 +0000 (10:27 -0500)]
cxgb3/l2t: Fix undefined behaviour
The use of zero-sized array causes undefined behaviour when it is not
the last member in a structure. As it happens to be in this case.
Also, the current code makes use of a language extension to the C90
standard, but the preferred mechanism to declare variable-length
types such as this one is a flexible array member, introduced in
C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last. Which is beneficial
to cultivate a high-quality code.
Fixes:
e48f129c2f20 ("[SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiaofei Shen [Fri, 29 Mar 2019 05:34:58 +0000 (11:04 +0530)]
net: dsa: read mac address from DT for slave device
Before creating a slave netdevice, get the mac address from DTS and
apply in case it is valid.
Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 1 Apr 2019 10:09:20 +0000 (03:09 -0700)]
tcp: fix tcp_inet6_sk() for 32bit kernels
It turns out that struct ipv6_pinfo is not located as we think.
inet6_sk_generic() and tcp_inet6_sk() disagree on 32bit kernels by 4-bytes,
because struct tcp_sock has 8-bytes alignment,
but ipv6_pinfo size is not a multiple of 8.
sizeof(struct ipv6_pinfo): 116 (not padded to 8)
I actually first coded tcp_inet6_sk() as this patch does, but thought
that "container_of(tcp_sk(sk), struct tcp6_sock, tcp)" was cleaner.
As Julian told me : Nobody should use tcp6_sock.inet6
directly, it should be accessed via tcp_inet6_sk() or inet6_sk().
This happened when we added the first u64 field in struct tcp_sock.
Fixes:
93a77c11ae79 ("tcp: add tcp_inet6_sk() helper")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 31 Mar 2019 13:18:48 +0000 (15:18 +0200)]
r8169: use netif_receive_skb_list batching
Use netif_receive_skb_list() instead of napi_gro_receive() to benefit
from batched skb processing.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 31 Mar 2019 18:01:23 +0000 (11:01 -0700)]
Merge branch 'mlxsw-spectrum_acl-Get-rid-of-failed_rollback-mechanism'
Ido Schimmel says:
====================
mlxsw: spectrum_acl: Get rid of failed_rollback mechanism
Jiri says:
Currently if vregion rehash fails, it rolls back to the original ERP
set. However, in case of unlikely rollback fail, the vregion is in a
zombie state and never gets rehashed again. With the recent changes, it
is possible to try to continue the rollback. Do it from the last failed
ventry.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 31 Mar 2019 06:49:41 +0000 (06:49 +0000)]
mlxsw: spectrum_acl: Rename rehash_dis trace
The name of the trace is no longer correct, since there is no disable of
rehash done. So name it "rehash_rollback_failed".
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 31 Mar 2019 06:49:40 +0000 (06:49 +0000)]
mlxsw: spectrum_acl: Remove failed_rollback dead end
Currently if a rollback ends with error, the vregion is in a zombie
state until end of the existence. Instead of that, rather try to
continue where rollback ended later on (after rehash interval).
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 31 Mar 2019 06:49:39 +0000 (06:49 +0000)]
mlxsw: spectrum_acl: Move rehash_dis trace call and err msg to vregion_migrate()
Move the call of rehash_dis trace and the error message to
vregion_migrate() next to the failed_rollback flag set.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sun, 31 Mar 2019 06:49:38 +0000 (06:49 +0000)]
mlxsw: spectrum_acl: Remove redundant failed_rollback from migrate_start()
The flag is set by the caller mlxsw_sp_acl_tcam_vregion_migrate() anyway,
so don't set it here.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Fri, 29 Mar 2019 13:38:19 +0000 (14:38 +0100)]
net: bridge: use netif_is_bridge_port()
Replace the br_port_exists() macro with its twin from netdevice.h
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Fri, 29 Mar 2019 13:37:07 +0000 (14:37 +0100)]
team: use netif_is_team_port()
Replace the team_port_exists() macro with its twin from netdevice.h
CC: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vishal Kulkarni [Fri, 29 Mar 2019 12:54:03 +0000 (18:24 +0530)]
cxgb4/cxgb4vf: Display advertised FEC in ethtool
This patch advertises Forward Error Correction in ethtool
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vishal Kulkarni [Fri, 29 Mar 2019 11:26:09 +0000 (16:56 +0530)]
cxgb4: Update 1.23.3.0 as the latest firmware supported.
Change t4fw_version.h to update latest firmware version
number to 1.23.3.0.
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
wenxu [Thu, 28 Mar 2019 04:43:23 +0000 (12:43 +0800)]
openvswitch: Make metadata_dst tunnel work in IP_TUNNEL_INFO_BRIDGE mode
There is currently no support for the multicast/broadcast aspects
of VXLAN in ovs. In the datapath flow the tun_dst must specific.
But in the IP_TUNNEL_INFO_BRIDGE mode the tun_dst can not be specific.
And the packet can forward through the fdb table of vxlan devcice. In
this mode the broadcast/multicast packet can be sent through the
following ways in ovs.
ovs-vsctl add-port br0 vxlan -- set in vxlan type=vxlan \
options:key=1000 options:remote_ip=flow
ovs-ofctl add-flow br0 in_port=LOCAL,dl_dst=ff:ff:ff:ff:ff:ff, \
action=output:vxlan
bridge fdb append ff:ff:ff:ff:ff:ff dev vxlan_sys_4789 dst 172.168.0.1 \
src_vni 1000 vni 1000 self
bridge fdb append ff:ff:ff:ff:ff:ff dev vxlan_sys_4789 dst 172.168.0.2 \
src_vni 1000 vni 1000 self
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 29 Mar 2019 19:46:17 +0000 (12:46 -0700)]
tcp: cleanup sk_tx_skb_cache before reuse
TCP stack relies on the fact that a freshly allocated skb
has skb->cb[] and skb_shinfo(skb)->tx_flags cleared.
When recycling tx skb, we must ensure these fields are cleared.
Fixes:
472c2e07eef0 ("tcp: add one skb cache for tx")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Boris Pismenny [Fri, 29 Mar 2019 17:19:44 +0000 (20:19 +0300)]
MAINTAINERS: Fix mellanox Innova IPsec
The Innova IPsec driver is part of all Innova drivers, and its
maintainenece is covered by an existing entry in this file.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmytro Linkin [Thu, 28 Mar 2019 16:09:31 +0000 (16:09 +0000)]
selftests: tc-testing: Add pedit tests
Add 36 pedit action tests to check pedit options described in tc-pedit(8)
man page. Test cases can be specified by categories: actions, pedit,
raw_op, layered_op. RAW_OP cases check offset option for u8, u16 and u32
offset size. LAYERED_OP cases check fields option for eth, ip, ip6,
tcp and udp headers.
Include following tests:
377e - Add pedit action with RAW_OP offset u32
a0ca - Add pedit action with RAW_OP offset u32 (INVALID)
dd8a - Add pedit action with RAW_OP offset u16 u16
53db - Add pedit action with RAW_OP offset u16 (INVALID)
5c7e - Add pedit action with RAW_OP offset u8 add value
2893 - Add pedit action with RAW_OP offset u8 quad
3a07 - Add pedit action with RAW_OP offset u8-u16-u8
ab0f - Add pedit action with RAW_OP offset u16-u8-u8
9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert
ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID)
f512 - Add pedit action with RAW_OP offset u16 at offmask shift set
c2cb - Add pedit action with RAW_OP offset u32 retain value
86d4 - Add pedit action with LAYERED_OP eth set src & dst
c715 - Add pedit action with LAYERED_OP eth set src (INVALID)
ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence
5810 - Add pedit action with LAYERED_OP ip set src & dst
1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield
02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol
3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID)
31ae - Add pedit action with LAYERED_OP ip ttl clear/set
486f - Add pedit action with LAYERED_OP ip set duplicate fields
e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag,
nofrag fields
6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport
afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type &
icmp_code
3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID)
fc1f - Add pedit action with LAYERED_OP ip6 set src & dst
6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID)
6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl
6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr,
hoplimit
1442 - Add pedit action with LAYERED_OP tcp set dport & sport
b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID)
cfcc - Add pedit action with LAYERED_OP tcp flags set
3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags
fields
f1c8 - Add pedit action with LAYERED_OP udp set dport & sport
d784 - Add pedit action with mixed RAW/LAYERED_OP #1
70ca - Add pedit action with mixed RAW/LAYERED_OP #2
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 22 Mar 2019 13:06:09 +0000 (06:06 -0700)]
ipv6: Move ipv6 stubs to a separate header file
The number of stubs is growing and has nothing to do with addrconf.
Move the definition of the stubs to a separate header file and update
users. In the move, drop the vxlan specific comment before ipv6_stub.
Code move only; no functional change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 29 Mar 2019 17:48:04 +0000 (10:48 -0700)]
Merge branch 'net-Move-fib_nh-and-fib6_nh-to-a-common-struct'
David Ahern says:
====================
net: Move fib_nh and fib6_nh to a common struct
First set of three with the end goal of enabling IPv6 gateways with IPv4
routes.
This set refactors ipv4 and ipv6 code to create init and release
helpers for each protocol and moving common elements to a fib_nh_common
struct.
v3
- split the reject setting into 2 with helper to the checks. This
avoids changing cfg->fc_flags in fib6_nh_init
v2
- addressed Ido's comments: cleanup on failure path in nh_init helpers,
ordering in fib6_nh_release, and removal of RTF_GATEWAY from fib6_info
uses in mlxsw
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:58 +0000 (20:53 -0700)]
net: Use common nexthop init and release helpers
With fib_nh_common in place, move common initialization and release
code into helpers used by both ipv4 and ipv6. For the moment, the init
is just the lwt encap and the release is both the netdev reference and
the the lwt state reference. More will be added later.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:57 +0000 (20:53 -0700)]
net: Add fib_nh_common and update fib_nh and fib6_nh
Add fib_nh_common struct with common nexthop attributes. Convert
fib_nh and fib6_nh to use it. Use macros to move existing
fib_nh_* references to the new nh_common.nhc_*.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:56 +0000 (20:53 -0700)]
ipv6: Rename fib6_nh entries
Rename fib6_nh entries that will be moved to a fib_nh_common struct.
Specifically, the device, gateway, flags, and lwtstate are common
with all nexthop definitions. In some places new temporary variables
are declared or local variables renamed to maintain line lengths.
Rename only; no functional change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:55 +0000 (20:53 -0700)]
ipv4: Rename fib_nh entries
Rename fib_nh entries that will be moved to a fib_nh_common struct.
Specifically, the device, oif, gateway, flags, scope, lwtstate,
nh_weight and nh_upper_bound are common with all nexthop definitions.
In the process shorten fib_nh_lwtstate to fib_nh_lws to avoid really
long lines.
Rename only; no functional change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:54 +0000 (20:53 -0700)]
ipv6: Change rt6_add_nexthop and rt6_nexthop_info to take fib6_nh
rt6_add_nexthop and rt6_nexthop_info only need the fib6_info for the
gateway flag and the nexthop weight, and the presence of a gateway is now
per-nexthop. Update the signatures to take a fib6_nh and nexthop weight
and better align with the ipv4 versions.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:53 +0000 (20:53 -0700)]
ipv6: Refactor fib6_ignore_linkdown
fib6_ignore_linkdown takes a fib6_info but only looks at the net_device
and its IPv6 config. Change it to take a net_device over a fib6_info as
its input argument.
In addition, move it to a header file to make the check inline and usable
later with IPv4 code without going through the ipv6 stub, and rename to
ip6_ignore_linkdown since it is only checking the setting based on the
ipv6 struct on a device.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:52 +0000 (20:53 -0700)]
ipv6: Move gateway checks to a fib6_nh setting
The gateway setting is not per fib6_info entry but per-fib6_nh. Add a new
fib_nh_has_gw flag to fib6_nh and convert references to RTF_GATEWAY to
the new flag. For IPv6 address the flag is cheaper than checking that
nh_gw is non-0 like IPv4 does.
While this increases fib6_nh by 8-bytes, the effective allocation size of
a fib6_info is unchanged. The 8 bytes is recovered later with a
fib_nh_common change.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:51 +0000 (20:53 -0700)]
ipv6: Create cleanup helper for fib6_nh
Move the fib6_nh cleanup code to a new helper, fib6_nh_release.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:50 +0000 (20:53 -0700)]
ipv6: Create init helper for fib6_nh
Similar to IPv4, consolidate the fib6_nh initialization into a helper.
As a new standalone function, add a cleanup path to put lwtstate on
error.
To avoid modifying fib6_config flags, move the reject check to a helper
that is invoked once by fib6_nh_init to reset the device and then
again in ip6_route_info_create to set the fib6_flags.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:49 +0000 (20:53 -0700)]
ipv4: Create cleanup helper for fib_nh
Move the fib_nh cleanup code from free_fib_info_rcu into a new helper,
fib_nh_release. Move classid accounting into fib_nh_release which is
called per fib_nh to make accounting symmetrical with fib_nh_init.
Export the helper to allow for use with nexthop objects in the
future.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:48 +0000 (20:53 -0700)]
ipv4: Create init helper for fib_nh
Consolidate the fib_nh initialization which is duplicated between
fib_create_info for single path and fib_get_nhs for multipath.
Export the helper to allow for use with nexthop objects in the
future.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:47 +0000 (20:53 -0700)]
ipv4: Move IN_DEV_IGNORE_ROUTES_WITH_LINKDOWN to helper
in_dev lookup followed by IN_DEV_IGNORE_ROUTES_WITH_LINKDOWN check
is called in several places, some with the rcu lock and others with the
rtnl held.
Move the check to a helper similar to what IPv6 has. Since the helper
can be invoked from either context use rcu_dereference_rtnl to
dereference ip_ptr.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 28 Mar 2019 03:53:46 +0000 (20:53 -0700)]
ipv4: Define fib_get_nhs when CONFIG_IP_ROUTE_MULTIPATH is disabled
Define fib_get_nhs to return EINVAL when CONFIG_IP_ROUTE_MULTIPATH is
not enabled and remove the ifdef check for CONFIG_IP_ROUTE_MULTIPATH
in fib_create_info.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 29 Mar 2019 00:20:53 +0000 (17:20 -0700)]
Merge branch 'selftests-forwarding-Add-new-test-cases'
Ido Schimmel says:
====================
selftests: forwarding: Add new test cases
This patchset mainly adds new forwarding test cases and performs small
changes in existing infrastructure.
Patches #1-#3 add new test cases for multicast RPF check, PCP and VLAN
matching using flower and tc VLAN modify action.
The rest of the patches are from Petr who says:
In patches #4 and #5, devlink_lib.sh is fixed to first not cause double
inclusion of lib.sh, and then to deduce the device name in a simpler way.
In patch #6, helpers for dealing with shared buffer configuration are
added to devlink_lib.sh.
In patch #7, MC-awareness test is fixed to configure shared buffers
explicitly.
In patch #8, several helpers are extracted from the MC-awareness test
and put into a new mlxsw-specific library, qos_lib.sh.
In patch #9, a new test is added which checks configuration of
strictly-prioritized streams.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 28 Mar 2019 12:12:27 +0000 (12:12 +0000)]
selftests: mlxsw: Add a new test for strict priority
Test that when strict priority is configured on a system, the
higher-priority traffic does actually win all the available bandwidth.
The test uses a similar approach to qos_mc_aware.sh to run and account
the traffic.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 28 Mar 2019 12:12:26 +0000 (12:12 +0000)]
selftests: mlxsw: Add qos_lib.sh
Extract reusable code from qos_mc_aware.sh and put into a new library.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>