OSDN Git Service
Shahar S Matityahu [Mon, 10 Jun 2019 13:14:20 +0000 (16:14 +0300)]
iwlwifi: dbg_ini: use linked list to store debug TLVs
Use a linked list to maintain the debug TLVs instead of a single buffer.
This way, the driver does not need to iterate over the binary file twice
and allocates smaller chunks of memory. Also, in case one allocation
fails the driver will work with the partial configuration instead of
aborting the entire debug configuration.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Thu, 13 Jun 2019 05:29:55 +0000 (08:29 +0300)]
iwlwifi: dbg_ini: maintain buffer allocations from trans instead of TLVs buffer
Maintain DRAM debug buffer status in trans instead of keeping it as
part of the TLVs buffer to avoid allocating extra space for it.
Needed for future changes.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Mon, 24 Jun 2019 07:37:05 +0000 (10:37 +0300)]
iwlwifi: dbg: add debug periphery registers to 9000 device family
Add debug HW periphery registers to 9000 device family.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Haim Dreyfuss [Thu, 13 Jun 2019 10:10:50 +0000 (13:10 +0300)]
iwlwifi: remove unused regdb_ptrs allocation
regdb_ptrs is not in used anymore, remove it.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Thu, 13 Jun 2019 12:01:07 +0000 (15:01 +0300)]
iwlwifi: dbg_ini: align dbg tlv functions names to a single format
align the naming to iwl_dbg_tlv_*
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ayala Beker [Mon, 17 Jun 2019 17:15:55 +0000 (20:15 +0300)]
iwlwifi: scan: don't pass large argument by value
Function iwl_mvm_scan_set_legacy_probe_req() second argument
size is too large to be passed by value.
Fix it to be passed by reference.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 11:56:14 +0000 (14:56 +0300)]
iwlwifi: remove pm_runtime completely
This means:
1) stop calling pm_runtime_resume when starting the hardware
2) removing the unneeded low_power parameter to start / stop hw / fw
transport ops
3) squashing transport functions that are now the same
_iwl_trans_pcie_start_hw / iwl_trans_pcie_start_hw
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 11:24:45 +0000 (14:24 +0300)]
iwlwifi: remove the d0i3 related module parameters
Those are now effectless.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 09:07:30 +0000 (12:07 +0300)]
iwlwifi: pcie: remove some more d0i3 code from the transport
CMD_SEND_IN_IDLE, CMD_MAKE_TRANS_IDLE and CMD_WAKE_UP_TRANS
are not used. Remove them.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:44:26 +0000 (11:44 +0300)]
iwlwifi: pcie: remove the refs / unrefs from the transport
This code is now stale
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:31:04 +0000 (11:31 +0300)]
iwlwifi: remove the opmode's d0i3 handlers
Remove the now unneeded functions that called those from the
transport layer.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:27:13 +0000 (11:27 +0300)]
iwlwifi: remove runtime_pm_mode
This is always set to IWL_PLAT_PM_MODE_DISABLED
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Alex Malamud [Mon, 10 Jun 2019 12:19:23 +0000 (15:19 +0300)]
iwlwifi: Set w-pointer upon resume according to SN
During D3 state, FW may send packets.
As a result, "write" queue pointer will be incremented by FW.
Upon resume from D3, driver should adjust its shadows of "write" and "read"
pointers to the value reported by FW.
1. Keep TID used during wowlan configuration.
2. Upon resume, set driver's "write" and "read" queue pointers
to the value reported by FW.
Signed-off-by: Alex Malamud <alex.malamud@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Tue, 11 Jun 2019 13:38:13 +0000 (15:38 +0200)]
iwlwifi: mvm: use FW thermal monitoring regardless of CONFIG_THERMAL
It doesn't make sense to use the FW thermal monitoring only if we
have CONFIG_THERMAL, because then we use the default thresholds
etc. which may be different from what the firmware implements, as
we don't maintain them in the driver now. Only the CTDP code needs
to actually be under CONFIG_THERMAL.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Mordechay Goodstein [Wed, 29 May 2019 12:39:07 +0000 (15:39 +0300)]
iwlwifi: mvm: name magic numbers with enum
It's hard to follow the numbers so rename it with enum
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ayala Beker [Thu, 23 May 2019 22:06:01 +0000 (01:06 +0300)]
iwlwifi: scan: add support for new scan request command version
Scan API was changed to support 6Ghz channels as well.
Support the new version.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Alex Malamud [Wed, 22 May 2019 10:49:18 +0000 (13:49 +0300)]
iwlwifi: LTR updates
New FW versions introduces LTR feature enablement by default.
For such FW versions, driver (mvm/xvt) should not send
host command to enable LTR feature, also it should be possible to
override LTR configuration through the debugfs.
1. Send LTR feature enablement command only for FW versions
which does not advertises SET_LTR_GEN2 capability.
2. Implement ltr_config file in debugfs for LTR configuration override.
Signed-off-by: Alex Malamud <alex.malamud@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:22:16 +0000 (11:22 +0300)]
iwlwifi: remove the code under IWLWIFI_PCIE_RTPM
This flag should never be set unless integration work with the
platform is done. We don't support any platforms officially and don't
plan to do so in the near future, so we can remove this option
entirely in order to avoid having it enabled by mistake.
This has been marked with "depends on EXPERT", so there shouldn't be
many systems running with it set. And, if there are systems, they
should not be using this flag.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:18:46 +0000 (11:18 +0300)]
iwlwifi: trans: remove suspending flag
This is set but never read.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:10:25 +0000 (11:10 +0300)]
iwlwifi: remove CMD_HIGH_PRIO
This flag is never set on any host command. Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:06:45 +0000 (11:06 +0300)]
iwlwifi: mvm: remove last leftovers of d0i3
We're now left with a status bit that is never set and a few
other leftovers.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:03:01 +0000 (11:03 +0300)]
iwlwifi: mvm: remove iwl_mvm_update_d0i3_power_mode
Also change the signature of the power functions that won't
receive d0i3=true anymore.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:00:09 +0000 (11:00 +0300)]
iwlwifi: mvm: remove d0i3_ap_sta_id
This variable read, but never set. Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 07:58:46 +0000 (10:58 +0300)]
iwlwifi: mvm: iwl_mvm_wowlan_config_key_params is for wowlan only
Now that d0i3 is dead, this function can't be called from d0i3
flows. Change its signature and make it static.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 07:47:33 +0000 (10:47 +0300)]
iwlwifi: mvm: remove the d0i3 entry/exit flow
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 07:41:17 +0000 (10:41 +0300)]
iwlwifi: mvm: remove the tx defer for d0i3
This is not needed anymore
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Tue, 11 Jun 2019 10:15:24 +0000 (13:15 +0300)]
iwlwifi: remove all the d0i3 references
As part of the d0i3 removal.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 06:52:56 +0000 (09:52 +0300)]
iwlwifi: mvm: start to remove the code for d0i3
For runtime PM to work with d0i3 code, a lot of integration work needs
to be done with the platform (e.g. the out-of-band wake up interrupt)
and we currently don't have any platforms where this integration
happened. So, this code has been pretty much stale for a while and
when someone enables it, it just breaks things.
Therefore, to simplify the code base and make sure no one enables this
by mistake, we will remove the whole code.
This is only the very start, much more work is needed.
Remove the places where we check iwl_mvm_is_d0i3_supported
but leave all the refs, those will be removed in a different
patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shaul Triebitz [Tue, 4 Jun 2019 08:50:34 +0000 (11:50 +0300)]
iwlwifi: mvm: add the skb length to a print
When printing a TX, add to the print the length of the frame.
That will help with BSEP (buffer status report poll) tests.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Beker Ayala [Sun, 2 Jun 2019 10:55:44 +0000 (13:55 +0300)]
iwlwifi: mvm: fix scan config command size
Use the actual length of channels array and not the max capable length.
Signed-off-by: Beker Ayala <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Thu, 23 May 2019 05:39:27 +0000 (08:39 +0300)]
iwlwifi: add ldbg config cmd debug print
add support to print ldbg command in mvm and xvt mode
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Sun, 19 May 2019 07:52:59 +0000 (10:52 +0300)]
iwlwifi: dbg: support debug recording suspend resume command
Support the new DBGC_SUSPEND_RESUME command to change the recording state.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Wed, 22 May 2019 10:47:29 +0000 (13:47 +0300)]
iwlwifi: dbg: move debug recording stop from trans to op mode
The op mode should stop the debug recording and not the transport layer.
Rename iwl_fwrt_stop_device into iwl_fw_dbg_stop_sync and move the debug
stop recording to it.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Tue, 21 May 2019 06:42:15 +0000 (09:42 +0300)]
iwlwifi: dbg: move monitor recording functionality from header file
The recording functions are quite big to be inline and the driver should
expose only the stop and restart functions that are allowed to be used
rather then the internal helper functions. Move the functions from the
header file.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Mon, 20 May 2019 09:26:16 +0000 (11:26 +0200)]
iwlwifi: mvm: remove unnecessary forward declarations
These static functions are only used after their definition,
so we don't need the forward declarations.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ilan Peer [Sun, 19 May 2019 11:56:31 +0000 (14:56 +0300)]
iwlwifi: mvm: Block 26-tone RU OFDMA transmissions
In case that there are OBSS that do not know how to properly
interpret 26-tone RU OFDMA transmissions, instruct the FW not
to use such transmissions.
The check is currently only performed upon association.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Tue, 21 May 2019 19:13:10 +0000 (22:13 +0300)]
iwlwifi: mvm: remove redundant condition in iwl_mvm_set_hw_rfkill_state
If mvm->fwrt.cur_fw_img != IWL_UCODE_INIT, then
rfkill_safe_init_done must be true since
rfkill_safe_init_done is set to true before we start to load
the runtime image.
Remove the redundant condition.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ilia Lin [Tue, 14 May 2019 14:19:06 +0000 (17:19 +0300)]
iwlwifi: Send DQA enable command only if TVL is on
The newer targets don't support the DQA enablement command
and will return error status, while older targets need it.
The feature is defined by the corresponding TLV.
Send the command only if the TLV is enabled.
Signed-off-by: Ilia Lin <ilia.lin@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Wed, 10 Apr 2019 06:23:39 +0000 (09:23 +0300)]
iwlwifi: bump FW API to 49 for 22000 series
Start supporting API version 49 for 22000 series.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Kalle Valo [Fri, 6 Sep 2019 08:59:32 +0000 (11:59 +0300)]
Merge tag 'mt76-for-kvalo-2019-09-05' of https://github.com/nbd168/wireless
mt76 patches for 5.4
* beacon tx fix for mt76x02
* sparse/checkpatch warning fixes
* DFS pattern detector for mt7615 (DFS channels not enabled yet)
* CSA support for mt7615
* mt7615 cleanup/fixes
* mt7615 rate control improvements
* usb fixes
* mt7615 powersave buffering fix
* new device support for mt76x0
* support for more ciphers in mt7615
* watchdog time fixes
* smart carrier sense on mt7615
* survey support on mt7615
* multiple interfaces on mt76x02u
* calibration data fix for mt7615
* fix for sending BAR after disassoc
Lorenzo Bianconi [Mon, 2 Sep 2019 12:51:54 +0000 (14:51 +0200)]
mt76: mt7615: add support to read temperature from mcu
Introduce debugfs entry to read device temperature and related cmu
command. Introduce mt7615_mcu_parse_response to parse mcu response
messages and refactor mt7615_mcu_msg_send routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 28 Aug 2019 09:01:40 +0000 (11:01 +0200)]
mt76: mt7615: introduce mt7615_txwi_to_txp utility routine
Introduce mt7615_txwi_to_txp utility routine to convert mt76_txwi_cache
into mt7615_txp and remove duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
YueHaibing [Tue, 27 Aug 2019 13:44:45 +0000 (21:44 +0800)]
mt76: mt7603: use devm_platform_ioremap_resource() to simplify code
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 23 Aug 2019 08:52:17 +0000 (10:52 +0200)]
mt76: mt76x0: remove unneeded return value on set channel
We allways return 0 from mt76x0_phy_set_channel(), no need to pass
return value upward.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 23 Aug 2019 08:52:16 +0000 (10:52 +0200)]
mt76: mt76x0: remove redundant chandef copy
We set dev->mt76.chandef in mt76_set_channel() already.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 23 Aug 2019 08:46:12 +0000 (10:46 +0200)]
mt76: make mt76_rx_convert static
mt76_rx_convert() not need to be exported any longer.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Aug 2019 08:08:56 +0000 (10:08 +0200)]
mt76: remove offchannel check in tx scheduling
tx queues are already disabled by mac80211 during scanning or other
off-channel activity. There is no need to repeat the check in mt76,
since scheduled queues are selected by mac80211 as well.
Signed-off-by: Balakrishna Bandi <b.balakrishna@globaledgesoft.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Aug 2019 07:37:41 +0000 (09:37 +0200)]
mt76: do not send BAR frame on tx aggregation flush stop
There is no need to send a BAR frame after stopping aggregation, and doing
so could lead to sending class 3 frames after deauthentication from an AP
Signed-off-by: Balakrishna Bandi <b.balakrishna@globaledgesoft.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 12 Aug 2019 13:48:53 +0000 (15:48 +0200)]
mt76: stop rx aggregation on station removal
Fixes use-after-free issues on forced station removal during hardware restart
on MT76x02
Fixes:
aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 12 Aug 2019 13:50:59 +0000 (15:50 +0200)]
mt76: dma: reset q->rx_head on rx reset
Fixes rx of the first frame if a fragmented rx was interrupted by the reset
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 21 Aug 2019 13:21:00 +0000 (15:21 +0200)]
mt76: mt7615: apply calibration-free data from OTP
MT7615 chips usually come pre-calibrated, even when used on embedded boards.
In that case, the on-flash EEPROM data needs to be merged with some data
from OTP ROM.
Run this merge if the external EEPROM data is valid and OTP has valid fields.
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 21 Aug 2019 08:00:19 +0000 (10:00 +0200)]
mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_complete
Introduce a default implementation for mt76_sw_scan and
mt76_sw_scan_complete in mt76 module and remove duplicated code
since most of the drivers share the same implementation
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 21 Aug 2019 03:11:15 +0000 (11:11 +0800)]
mt76: fix some checkpatch warnings
This fixes the following checkpatch warnings:
CHECK: Alignment should match open parenthesis
CHECK: No space is necessary after a cast
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Tue, 20 Aug 2019 14:56:25 +0000 (16:56 +0200)]
mt76: mt7615: add BIP_CMAC_128 cipher support
Refactor mt7615_mac_wtbl_set_key and introduce
the following routines in order to configure wtbl entries
and properly add hw support to BIP_CMAC_128 cipher:
- mt7615_mac_wtbl_update_cipher
- mt7615_mac_wtbl_update_pk
- mt7615_mac_wtbl_update_key
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 9 Aug 2019 17:25:15 +0000 (19:25 +0200)]
mt76: mt7603: remove unnecessary mcu queue initialization
Remove unnecessary mcu queue initialization in mt7603_dma_init since it
has been already done in mt76_mmio_init
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 9 Aug 2019 17:06:02 +0000 (19:06 +0200)]
mt76: move mt76_tx_tasklet in mt76 module
Move mt76{15,03}_tx_tasklet in mt76_alloc_device in order to be used as
default tx_tasklet initialization. Remove duplicated code in
mt7603/mt7615 drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 5 Aug 2019 06:55:53 +0000 (08:55 +0200)]
mt76: mt7615: enable survey support
Introduce channel survey support for mt7615 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 5 Aug 2019 06:55:52 +0000 (08:55 +0200)]
mt76: mt7603: move survey_time in mt76_dev
Move survey_time field in mt76_dev in order to be reused adding survey
support to mt7615 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 5 Aug 2019 06:55:51 +0000 (08:55 +0200)]
mt76: mt76x02u: enable survey support
Introduce channel survey support for mt76x2u and mt76x0u drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 2 Aug 2019 14:36:20 +0000 (16:36 +0200)]
mt76: mt76x02u: enable multi-vif support
Enable multi-interface support for mt76x02u driver. For the moment
allow max two concurrent interfaces in order to preserve enough room
for ps traffic since we are using beacon slots for it.
I have successfully tested the following configuration:
- AP + STA
- AP0 + AP1
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 1 Aug 2019 08:26:23 +0000 (10:26 +0200)]
mt76: mt76x02: do not copy beacon skb in mt76x02_mac_set_beacon_enable
Do not copy beacon skb in mt76x02_mac_set_beacon_enable for usb devices
since it will be done in mt76x02_update_beacon_iter. Moreover squash
mt76x02_mac_set_beacon_enable and __mt76x02_mac_set_beacon_enable since
the latter is run just by mt76x02_mac_set_beacon_enable
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 1 Aug 2019 08:26:22 +0000 (10:26 +0200)]
mt76: mt76x02: introduce mt76x02_pre_tbtt_enable and mt76x02_beacon_enable macros
Improve code readability introducing mt76x02_pre_tbtt_enable and
mt76x02_beacon_enable utility macros
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 28 Jul 2019 19:03:18 +0000 (21:03 +0200)]
mt76: mt7615: add Smart Carrier Sense support
Introduce Smart Carrier Sense support in order to tune device
sensitivity according to RTS error rate and False CCA reported by the
radio
Tested-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sun, 28 Jul 2019 19:03:17 +0000 (21:03 +0200)]
mt76: mt7615: rework locking scheme for mt7615_set_channel
As already done for mt7603 driver, move mt76.mutex lock inside
mt7615_set_channel since we need to grab mt76.mutex in mt7615_mac_work.
This is a preliminary patch to add Smart Carrier Sense (SCS) support
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 24 Jul 2019 08:58:20 +0000 (16:58 +0800)]
mt76: switch to SPDX tag instead of verbose boilerplate text
No functional change intended.
Add SPDX identifiers to all remaining files in /mt76.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 24 Jul 2019 08:58:18 +0000 (16:58 +0800)]
mt76: mt76x02: fix some checkpatch warnings
This fixes the following checkpatch warnings:
ERROR: code indent should use tabs where possible
CHECK: Alignment should match open parenthesis
CHECK: No space is necessary after a cast
CHECK: Please don't use multiple blank lines
CHECK: Avoid precedence issues in macro
WARNING: Statements should start on a tabstop
WARNING: Unnecessary space before function pointer arguments
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 24 Jul 2019 08:58:17 +0000 (16:58 +0800)]
mt76: mt7615: fix some checkpatch warnings
This fixes the following checkpatch warnings:
WARNING: Improper SPDX comment style
Fix blank lines.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 24 Jul 2019 08:58:16 +0000 (16:58 +0800)]
mt76: mt7603: fix some checkpatch warnings
This fixes the following checkpatch warnings:
WARNING: Improper SPDX comment style
CHECK: No space is necessary after a cast
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 24 Jul 2019 08:58:15 +0000 (16:58 +0800)]
mt76: Add paragraphs to describe the config symbols fully
Update the help text to fix a checkpatch warning:
WARNING: please write a paragraph that describes the config symbol fully
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Mon, 22 Jul 2019 08:50:09 +0000 (16:50 +0800)]
mt76: mt7615: update cw_min/max related settings
Add default values of cw_min/max and use fls() for configuration.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Mon, 22 Jul 2019 08:50:08 +0000 (16:50 +0800)]
mt76: mt7615: add 4 WMM sets support
Hardware supports 4 sets of WMM that should be put to good use.
And fix incorrect queue mapping in mt7615_conf_tx().
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 18 Jul 2019 22:50:42 +0000 (00:50 +0200)]
mt76: mt7603: fix watchdog rescheduling in mt7603_set_channel
Convert MT7603_WATCHDOG_TIME in jiffies rescheduling watchdog delayed
work
Fixes:
c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 18 Jul 2019 22:44:16 +0000 (00:44 +0200)]
mt76: mt7615: fix MT7615_WATCHDOG_TIME definition
Express watchdog timeout in jiffies since it is used directly in
ieee80211_queue_delayed_work
Fixes:
04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:06 +0000 (17:09 +0200)]
mt76: introduce mt76_mmio_read_copy routine
Add mt76_mmio_read_copy routine and the related function pointer in
mt76_bus_ops data structure. mt76_mmio_read_copy will be used to add
BIP_CMAC_128 cipher hw support to mt7615 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:05 +0000 (17:09 +0200)]
mt76: mt7615: add set_key_cmd and mt76_wcid to mt7615_mac_wtbl_set_key signature
Introduce set_key_cmd and mt76_wcid pointer to mt7615_mac_wtbl_set_key
signature and do not set key to NULL if cmd is DISABLE_KEY.
This is a preliminary patch to add BIP_CMAC_128 hw support to mt7615
driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:04 +0000 (17:09 +0200)]
mt76: mt7615: remove wtbl_sec_key definition
Get rid of wtbl_sec_key definition since it is no longer used
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:03 +0000 (17:09 +0200)]
mt76: mt7615: introduce mt7615_mac_wtbl_set_key routine
Add mt7615_mac_wtbl_set_key routine to configure wtbl key parameter
directly from host cpu. This is a preliminary patch to add BIP_CMAC_128
hw support. Moreover add static qualifier to mt7615_mac_get_key_info
routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:02 +0000 (17:09 +0200)]
mt76: mt7615: add mt7615_mac_wtbl_addr routine
Introduce mt7615_mac_wtbl_addr rouinte to compute sta wtbl address.
This is a preliminary patch to update wtbl key directly from host
processor
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 13 Jul 2019 15:09:01 +0000 (17:09 +0200)]
mt76: mt7615: move mt7615_mac_get_key_info in mac.c
This is a preliminary patch to update wtbl key directly from host
processor
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 16 Jul 2019 16:12:07 +0000 (18:12 +0200)]
mt76: mt7615: add missing register initialization
- initialize CCA signal source
- initialize clock for band 1 (7615D)
- initialize BAR rate
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 5 Jul 2019 19:01:04 +0000 (21:01 +0200)]
mt76: mt76x0u: add support to TP-Link T2UHP
Introduce support to TP-Link T2UHP
https://wikidevi.com/wiki/TP-LINK_Archer_T2UHP
Tested-by: Sid Hayn <sidhayn@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 12 Jul 2019 12:08:00 +0000 (14:08 +0200)]
mt76: mt7615: use params->ssn value directly
There is no point to use pointer to params->ssn.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 12 Jul 2019 12:07:59 +0000 (14:07 +0200)]
mt76: mt7603: use params->ssn value directly
There is no point to use pointer to params->ssn.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 12 Jul 2019 12:07:58 +0000 (14:07 +0200)]
mt76: mt76x02: use params->ssn value directly
There is no point to use pointer to params->ssn.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Tue, 9 Jul 2019 15:14:55 +0000 (17:14 +0200)]
mt76: usb: remove unneeded {put,get}_unaligned
Compiler give us guarantees on variables alignment, so use
an variable as buffer when read/write registers and remove
unneeded {put,get}_unaligned.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Tue, 9 Jul 2019 15:14:54 +0000 (17:14 +0200)]
mt76: usb: fix endian in mt76u_copy
In contrast to mt76_wr() which we use to program registers,
on mt76_wr_copy() we should not change endian of the data.
Fixes:
b40b15e1521f ("mt76: add usb support to mt76 layer")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 12 Jul 2019 06:19:35 +0000 (08:19 +0200)]
mt76: mt7603: fix invalid fallback rates
Only decrement the rate index on duplicate rates if it is not already 0
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 11 Jul 2019 19:34:25 +0000 (21:34 +0200)]
mt76: mt7615: fix invalid fallback rates
Only decrement the rate index on duplicate rates if it is not already 0
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 11 Jul 2019 19:32:00 +0000 (21:32 +0200)]
mt76: mt7615: fix PS buffering of action frames
Bufferable management frames need to be put in the data queue, otherwise
they will not be buffered when the receiver is asleep.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 11 Jul 2019 19:17:06 +0000 (21:17 +0200)]
mt76: mt7615: fix using VHT STBC rates
The hardware expects MT_TX_RATE_NSS to be filled with the number of
space/time streams. For non-STBC rates, this is equal to nss.
For 1-stream STBC, this needs to be set to 2.
This is relevant for VHT rates only, on HT, the value is derived from MCS
internally.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 3 Jul 2019 22:59:19 +0000 (00:59 +0200)]
mt76: mt76u: fix typo in mt76u_fill_rx_sg
Fix typo setting urb->transfer_buffer_length in mt76u_fill_rx_sg
Fixes:
b40b15e1521f ("mt76: add usb support to mt76 layer")
Fixes:
f8f527b16db5 ("mt76: usb: use EP max packet aligned buffer sizes for rx")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Jul 2019 19:39:04 +0000 (21:39 +0200)]
mt76: mt7615: sync with mt7603 rate control changes
- Store the previous and current rate set in the driver + the TSF value
at the time of the switch.
- Use the tx status TSF value to determine which rate set needs to be used
as reference.
- Report only short or long GI rates for a single status event, not a mix.
- The hardware reports the last used rate index. Use it along with the
retry count to figure out what rate was used for the first attempt.
- Use the same retry count value for all rate slots to make this calculation
work.
- Derive the probe rate from the current rateset instead of the skb cb
- Do not wait for a status report for the probe frame before removing the
probe rate from the rate table. Do it immediately after it was referenced
in a tx status report.
- Use the first half of the first rate retry budget for the probe rate
in order to avoid using too many retries on that rate
- Switch from lower rates to higher rates more conservatively
- enable hardware rate up/down selection
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Jul 2019 19:32:10 +0000 (21:32 +0200)]
mt76: mt7615: reset rate index/counters on rate table update
These values must be initialized to zero, otherwise the hardware could
reuse previous values, especially the rate index
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Jul 2019 18:08:35 +0000 (20:08 +0200)]
mt76: mt7615: move mt7615_mcu_set_rates to mac.c
It bypasses the MCU, so it does not belong in mcu.c
Also make mt7615_mac_tx_rate_val static
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 3 Jul 2019 19:44:23 +0000 (21:44 +0200)]
mt76: mt7603: enable hardware rate up/down selection
Improves performance by switching away from bad rates faster
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Tue, 2 Jul 2019 11:39:49 +0000 (13:39 +0200)]
mt76: mt7615: introduce mt7615_mcu_send_ram_firmware routine
Add mt7615_mcu_send_ram_firmware routine since mt7615_load_ram runs the
same code to send ram firmware to cr4 and n9 mcus. Moreover rename
gen_dl_mode in mt7615_mcu_gen_dl_mode.
This patch does not introduce any behaviour change, it is just code
refactor.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Tue, 2 Jul 2019 09:24:51 +0000 (11:24 +0200)]
mt76: mt7615: always release sem in mt7615_load_patch
Release patch semaphore even if request_firmware fails in
mt7615_load_patch
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 1 Jul 2019 13:04:39 +0000 (15:04 +0200)]
mt76: mt7615: fall back to sw encryption for unsupported ciphers
Fix following warning falling back to sw encryption for unsupported
ciphers
WARNING: CPU: 2 PID: 1495 at backports-4.19.32-1/net/mac80211/key.c:1023
mt76_wcid_key_setup+0x68/0xbc [mt76]
CPU: 2 PID: 1495 Comm: hostapd Not tainted 4.14.131 #0
Stack :
00000000 8f0f8bc0 00000000 8007ccec 805f0000 8058ec18 00000000 00000000
80559788 8dca79bc 8fefb10c 805c89c7 805545c8 00000001 8dca7960 53261662
00000000 00000000 80640000 00004668 00000000 000000e9 00000007 00000000
00000000 805d0000 00072537 00000000 80000000 00000000 805f0000 8f1e70d0
8e8fa098 000003ff 805c0000 8f0f8bc0 00000001 802d4340 00000008 80630008
[<
800108d0>] show_stack+0x58/0x100
[<
8049214c>] dump_stack+0x9c/0xe0
[<
80033998>] __warn+0xe0/0x138
[<
80033a80>] warn_slowpath_null+0x1c/0x2c
[<
8e8fa098>] mt76_wcid_key_setup+0x68/0xbc [mt76]
[<
8e889930>] mt7615_eeprom_init+0x7c0/0xe14 [mt7615e]
Suggested-by: Sebastian Gottschall <s.gottschall@newmedia-net.de>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 1 Jul 2019 18:17:40 +0000 (20:17 +0200)]
mt76: mt7615: clean up FWDL TXQ during/after firmware upload
Since we don't clean that tx queue from the tx tasklet, we need to do it
after the firmware upload is done. This patch also adds a cleanup step during
the upload, to help reclaim memory faster.
Fixes unprocessed queued frames eating up memory long after the firmware
upload has already completed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Sat, 29 Jun 2019 10:36:11 +0000 (12:36 +0200)]
mt76: mt7615: add radar pattern test knob to debugfs
Introduce mt7615_mcu_rdd_send_pattern routine to trigger a radar pattern
detection. Moreover move debugfs related routines in a dedicated source
file.
Suggested-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>