OSDN Git Service
Xiaoguang Wang [Sat, 28 May 2022 01:51:09 +0000 (09:51 +0800)]
io_uring: defer alloc_hint update to io_file_bitmap_set()
io_file_bitmap_get() returns a free bitmap slot, but if it isn't
used later, such as io_queue_rsrc_removal() returns error, in this
case, we should not update alloc_hint at all, which still should
be considered as a valid candidate for next io_file_bitmap_get()
calls.
To fix this issue, only update alloc_hint in io_file_bitmap_set().
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220528015109.48039-1-xiaoguang.wang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Xiaoguang Wang [Fri, 27 May 2022 02:54:00 +0000 (10:54 +0800)]
io_uring: ensure fput() called correspondingly when direct install fails
io_fixed_fd_install() may fail for short of free fixed file bitmap,
in this case, need to call fput() correspondingly.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220527025400.51048-1-xiaoguang.wang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 26 May 2022 22:58:18 +0000 (16:58 -0600)]
io_uring: wire up allocated direct descriptors for socket
The socket support was merged in an earlier branch that didn't yet
have support for allocating direct descriptors, hence only open
and accept got support for that.
Do the one-liner to enable it now, so we have consistent support for
any request that can instantiate a file/direct descriptor.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 26 May 2022 17:34:33 +0000 (11:34 -0600)]
io_uring: fix a memory leak of buffer group list on exit
If we use a buffer group ID that is large enough to require io_uring
to allocate it, then we don't correctly free it if the cleanup is
deferred to the ring exit. The explicit removal paths are fine.
Fixes:
9cfc7e94e42b ("io_uring: get rid of hashed provided buffer groups")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 24 May 2022 00:43:13 +0000 (18:43 -0600)]
io_uring: move shutdown under the general net section
Gets rid of some ifdefs and enables use of the net defines for when
CONFIG_NET isn't set.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 23 May 2022 23:16:21 +0000 (17:16 -0600)]
io_uring: unify calling convention for async prep handling
Make them consistent in preparation for defining a req async prep
handler. The readv/writev requests share a prep handler, move it one
level down so the initial one is consistent with the others.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 23 May 2022 22:53:15 +0000 (16:53 -0600)]
io_uring: add io_op_defs 'def' pointer in req init and issue
Define and set it when appropriate, and use it consistently in the
function rather than using io_op_defs[opcode].
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 23 May 2022 22:49:31 +0000 (16:49 -0600)]
io_uring: make prep and issue side of req handlers named consistently
Almost all of them are, the odd ones out are the poll remove and the
files update request. Name them like the others, which is:
io_#cmdname_prep for request preparation
io_#cmdname for request issue
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 23 May 2022 22:13:56 +0000 (16:13 -0600)]
io_uring: make timeout prep handlers consistent with other prep handlers
All other opcodes take a {req, sqe} set for prep handling, split out
a timeout prep handler so that timeout and linked timeouts can use
the same one.
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Mon, 23 May 2022 21:36:45 +0000 (14:36 -0700)]
Merge tag 'zonefs-5.19-rc1' of git://git./linux/kernel/git/dlemoal/zonefs
Pull zonefs updates from Damien Le Moal:
"This improves zonefs open sequential file accounting and adds
accounting for active sequential files to allow the user to handle the
maximum number of active zones of an NVMe ZNS drive.
sysfs attributes for both open and active sequential files are also
added to facilitate access to this information from applications
without resorting to inspecting the block device limits"
* tag 'zonefs-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
documentation: zonefs: Document sysfs attributes
documentation: zonefs: Cleanup the mount options section
zonefs: Add active seq file accounting
zonefs: Export open zone resource information through sysfs
zonefs: Always do seq file write open accounting
zonefs: Rename super block information fields
zonefs: Fix management of open zones
zonefs: Clear inode information flags on inode creation
Linus Torvalds [Mon, 23 May 2022 21:14:50 +0000 (14:14 -0700)]
Merge tag 'ata-5.19-rc1' of git://git./linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
"For this cycle, the libata.force kernel parameter changes stand out.
Beside that, some small cleanups in various drivers. In more detail:
- Changes to the pata_mpc52xx driver in preparation for powerpc's
asm/prom.h cleanup, from Christophe.
- Improved ATA command allocation, from John.
- Various small cleanups to the pata_via, pata_sil680, pata_ftide010,
sata_gemini, ahci_brcm drivers and to libata-core, from Sergey,
Diego, Ruyi, Mighao and Jiabing.
- Add support for the RZ/G2H SoC to the rcar-sata driver, from Lad.
- AHCI RAID ID cleanup, from Dan.
- Improvement to the libata.force kernel parameter to allow most
horkage flags to be manually forced for debugging drive issues in
the field without needing recompiling a kernel, from me"
* tag 'ata-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_ftide010: Remove unneeded ERROR check before clk_disable_unprepare
doc: admin-guide: Update libata kernel parameters
ata: libata-core: Allow forcing most horkage flags
ata: libata-core: Improve link flags forced settings
ata: libata-core: Refactor force_tbl definition
ata: libata-core: cleanup ata_device_blacklist
ata: simplify the return expression of brcm_ahci_remove
ata: Make use of the helper function devm_platform_ioremap_resource()
ata: libata-core: replace "its" with "it is"
ahci: Add a generic 'controller2' RAID id
dt-bindings: ata: renesas,rcar-sata: Add r8a774e1 support
ata: pata_via: fix sloppy typing in via_do_set_mode()
ata: pata_sil680: fix result type of sil680_sel{dev|reg}()
ata: libata-core: fix parameter type in ata_xfer_mode2shift()
libata: Improve ATA queued command allocation
ata: pata_mpc52xx: Prepare cleanup of powerpc's asm/prom.h
Linus Torvalds [Mon, 23 May 2022 21:04:14 +0000 (14:04 -0700)]
Merge tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates queued up for 5.19. This contains:
- NVMe pull requests via Christoph:
- tighten the PCI presence check (Stefan Roese)
- fix a potential NULL pointer dereference in an error path (Kyle
Miller Smith)
- fix interpretation of the DMRSL field (Tom Yan)
- relax the data transfer alignment (Keith Busch)
- verbose error logging improvements (Max Gurtovoy, Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni, Christoph)
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (Christoph)
- MD pull request via Song:
- Improve annotation in raid5 code, by Logan Gunthorpe
- Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk
- Other small fixes/cleanups
- null_blk series making the configfs side much saner (Damien)
- Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng,
Arnd, Cai)
- Avoid using the system workqueue (and hence flushing it) in rnbd
(Jack)
- Avoid using the system workqueue (and hence flushing it) in aoe
(Tetsuo)
- Series fixing discard_alignment issues in drivers (Christoph)
- Small series fixing drivers poking at disk->part0 for openers
information (Christoph)
- Series fixing deadlocks in loop (Christoph, Tetsuo)
- Remove loop.h and add SPDX headers (Christoph)
- Various fixes and cleanups (Julia, Xie, Yu)"
* tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits)
mtip32xx: fix typo in comment
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
nvme: split the enum used for various register constants
nbd: Fix hung on disconnect request if socket is closed before
nvme-fabrics: add a request timeout helper
nvme-pci: harden drive presence detect in nvme_dev_disable()
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
nvme: mark internal passthru request RQF_QUIET
nvme: remove unneeded include from constants file
nvme: add missing status values to verbose logging
nvme: set dma alignment to dword
nvme: fix interpretation of DMRSL
loop: remove most the top-of-file boilerplate comment from the UAPI header
loop: remove most the top-of-file boilerplate comment
loop: add a SPDX header
loop: remove loop.h
block: null_blk: Improve device creation with configfs
block: null_blk: Cleanup messages
block: null_blk: Cleanup device creation and deletion
...
Linus Torvalds [Mon, 23 May 2022 20:56:39 +0000 (13:56 -0700)]
Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
Linus Torvalds [Mon, 23 May 2022 20:52:14 +0000 (13:52 -0700)]
Merge tag 'for-5.19/cdrom-2022-05-22' of git://git.kernel.dk/linux-block
Pull cdrom updates from Jens Axboe:
"Removal of unused code and documentation updates"
* tag 'for-5.19/cdrom-2022-05-22' of git://git.kernel.dk/linux-block:
cdrom: remove obsolete TODO list
block: remove last remaining traces of IDE documentation
cdrom: mark CDROMGETSPINDOWN/CDROMSETSPINDOWN obsolete
cdrom: remove the unused driver specific disc change ioctl
cdrom: make EXPORT_SYMBOL follow exported function
Linus Torvalds [Mon, 23 May 2022 20:48:23 +0000 (13:48 -0700)]
Merge tag 'for-5.19/writeback-2022-05-22' of git://git.kernel.dk/linux-block
Pull writeback fix from Jens Axboe:
"A single writeback fix that didn't belong in any other branch,
correcting the number of skipped pages"
* tag 'for-5.19/writeback-2022-05-22' of git://git.kernel.dk/linux-block:
fs-writeback: writeback_sb_inodes:Recalculate 'wrote' according skipped pages
Linus Torvalds [Mon, 23 May 2022 20:06:15 +0000 (13:06 -0700)]
Merge tag 'for-5.19/io_uring-passthrough-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring NVMe command passthrough from Jens Axboe:
"On top of everything else, this adds support for passthrough for
io_uring.
The initial feature for this is NVMe passthrough support, which allows
non-filesystem based IO commands and admin commands.
To support this, io_uring grows support for SQE and CQE members that
are twice as big, allowing to pass in a full NVMe command without
having to copy data around. And to complete with more than just a
single 32-bit value as the output"
* tag 'for-5.19/io_uring-passthrough-2022-05-22' of git://git.kernel.dk/linux-block: (22 commits)
io_uring: cleanup handling of the two task_work lists
nvme: enable uring-passthrough for admin commands
nvme: helper for uring-passthrough checks
blk-mq: fix passthrough plugging
nvme: add vectored-io support for uring-cmd
nvme: wire-up uring-cmd support for io-passthru on char-device.
nvme: refactor nvme_submit_user_cmd()
block: wire-up support for passthrough plugging
fs,io_uring: add infrastructure for uring-cmd
io_uring: support CQE32 for nop operation
io_uring: enable CQE32
io_uring: support CQE32 in /proc info
io_uring: add tracing for additional CQE32 fields
io_uring: overflow processing for CQE32
io_uring: flush completions for CQE32
io_uring: modify io_get_cqe for CQE32
io_uring: add CQE32 completion processing
io_uring: add CQE32 setup processing
io_uring: change ring size calculation for CQE32
io_uring: store add. return values for CQE32
...
Linus Torvalds [Mon, 23 May 2022 19:51:04 +0000 (12:51 -0700)]
Merge tag 'for-5.19/io_uring-net-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring 'more data in socket' support from Jens Axboe:
"To be able to fully utilize the 'poll first' support in the core
io_uring branch, it's advantageous knowing if the socket was empty
after a receive. This adds support for that"
* tag 'for-5.19/io_uring-net-2022-05-22' of git://git.kernel.dk/linux-block:
io_uring: return hint on whether more data is available after receive
tcp: pass back data left in socket after receive
Linus Torvalds [Mon, 23 May 2022 19:42:33 +0000 (12:42 -0700)]
Merge tag 'for-5.19/io_uring-socket-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring socket() support from Jens Axboe:
"This adds support for socket(2) for io_uring. This is handy when using
direct / registered file descriptors with io_uring.
Outside of those two patches, a small series from Dylan on top that
improves the tracing by providing a text representation of the opcode
rather than needing to decode this by reading the header file every
time.
That sits in this branch as it was the last opcode added (until it
wasn't...)"
* tag 'for-5.19/io_uring-socket-2022-05-22' of git://git.kernel.dk/linux-block:
io_uring: use the text representation of ops in trace
io_uring: rename op -> opcode
io_uring: add io_uring_get_opcode
io_uring: add type to op enum
io_uring: add socket(2) support
net: add __sys_socket_file()
Linus Torvalds [Mon, 23 May 2022 19:30:30 +0000 (12:30 -0700)]
Merge tag 'for-5.19/io_uring-xattr-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring xattr support from Jens Axboe:
"Support for the xattr variants"
* tag 'for-5.19/io_uring-xattr-2022-05-22' of git://git.kernel.dk/linux-block:
io_uring: cleanup error-handling around io_req_complete
io_uring: fix trace for reduced sqe padding
io_uring: add fgetxattr and getxattr support
io_uring: add fsetxattr and setxattr support
fs: split off do_getxattr from getxattr
fs: split off setxattr_copy and do_setxattr function from setxattr
Linus Torvalds [Mon, 23 May 2022 19:22:49 +0000 (12:22 -0700)]
Merge tag 'for-5.19/io_uring-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Here are the main io_uring changes for 5.19. This contains:
- Fixes for sparse type warnings (Christoph, Vasily)
- Support for multi-shot accept (Hao)
- Support for io_uring managed fixed files, rather than always
needing the applicationt o manage the indices (me)
- Fix for a spurious poll wakeup (Dylan)
- CQE overflow fixes (Dylan)
- Support more types of cancelations (me)
- Support for co-operative task_work signaling, rather than always
forcing an IPI (me)
- Support for doing poll first when appropriate, rather than always
attempting a transfer first (me)
- Provided buffer cleanups and support for mapped buffers (me)
- Improve how io_uring handles inflight SCM files (Pavel)
- Speedups for registered files (Pavel, me)
- Organize the completion data in a struct in io_kiocb rather than
keep it in separate spots (Pavel)
- task_work improvements (Pavel)
- Cleanup and optimize the submission path, in general and for
handling links (Pavel)
- Speedups for registered resource handling (Pavel)
- Support sparse buffers and file maps (Pavel, me)
- Various fixes and cleanups (Almog, Pavel, me)"
* tag 'for-5.19/io_uring-2022-05-22' of git://git.kernel.dk/linux-block: (111 commits)
io_uring: fix incorrect __kernel_rwf_t cast
io_uring: disallow mixed provided buffer group registrations
io_uring: initialize io_buffer_list head when shared ring is unregistered
io_uring: add fully sparse buffer registration
io_uring: use rcu_dereference in io_close
io_uring: consistently use the EPOLL* defines
io_uring: make apoll_events a __poll_t
io_uring: drop a spurious inline on a forward declaration
io_uring: don't use ERR_PTR for user pointers
io_uring: use a rwf_t for io_rw.flags
io_uring: add support for ring mapped supplied buffers
io_uring: add io_pin_pages() helper
io_uring: add buffer selection support to IORING_OP_NOP
io_uring: fix locking state for empty buffer group
io_uring: implement multishot mode for accept
io_uring: let fast poll support multishot
io_uring: add REQ_F_APOLL_MULTISHOT for requests
io_uring: add IORING_ACCEPT_MULTISHOT for accept
io_uring: only wake when the correct events are set
io_uring: avoid io-wq -EAGAIN looping for !IOPOLL
...
Linus Torvalds [Mon, 23 May 2022 18:46:51 +0000 (11:46 -0700)]
Merge tag 'rcu.2022.05.19a' of git://git./linux/kernel/git/paulmck/linux-rcu
Pull RCU update from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offloading updates, mainly simplifications
- RCU-tasks updates, including some -rt fixups, handling of systems
with sparse CPU numbering, and a fix for a boot-time race-condition
failure
- Put SRCU on a memory diet in order to reduce the size of the
srcu_struct structure
- Torture-test updates fixing some bugs in tests and closing some
testing holes
- Torture-test updates for the RCU tasks flavors, most notably ensuring
that building rcutorture and friends does not change the
RCU-tasks-related Kconfig options
- Torture-test scripting updates
- Expedited grace-period updates, most notably providing
milliseconds-scale (not all that) soft real-time response from
synchronize_rcu_expedited().
This is also the first time in almost 30 years of RCU that someone
other than me has pushed for a reduction in the RCU CPU stall-warning
timeout, in this case by more than three orders of magnitude from 21
seconds to 20 milliseconds. This tighter timeout applies only to
expedited grace periods
* tag 'rcu.2022.05.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu: Move expedited grace period (GP) work to RT kthread_worker
rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT
srcu: Drop needless initialization of sdp in srcu_gp_start()
srcu: Prevent expedited GPs and blocking readers from consuming CPU
srcu: Add contention check to call_srcu() srcu_data ->lock acquisition
srcu: Automatically determine size-transition strategy at boot
rcutorture: Make torture.sh allow for --kasan
rcutorture: Make torture.sh refscale and rcuscale specify Tasks Trace RCU
rcutorture: Make kvm.sh allow more memory for --kasan runs
torture: Save "make allmodconfig" .config file
scftorture: Remove extraneous "scf" from per_version_boot_params
rcutorture: Adjust scenarios' Kconfig options for CONFIG_PREEMPT_DYNAMIC
torture: Enable CSD-lock stall reports for scftorture
torture: Skip vmlinux check for kvm-again.sh runs
scftorture: Adjust for TASKS_RCU Kconfig option being selected
rcuscale: Allow rcuscale without RCU Tasks Rude/Trace
rcuscale: Allow rcuscale without RCU Tasks
refscale: Allow refscale without RCU Tasks Rude/Trace
refscale: Allow refscale without RCU Tasks
rcutorture: Allow specifying per-scenario stat_interval
...
Linus Torvalds [Mon, 23 May 2022 18:43:44 +0000 (11:43 -0700)]
Merge tag 'lkmm.2022.05.20a' of git://git./linux/kernel/git/paulmck/linux-rcu
Pull LKMM update from Paul McKenney:
"This updates the klitmus7 compatibility table to indicate that
herdtools7 7.56.1 or better is required for Linux kernel v5.17 or
later"
* tag 'lkmm.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model/README: Update klitmus7 compat table
Linus Torvalds [Mon, 23 May 2022 18:33:25 +0000 (11:33 -0700)]
Merge tag 'nolibc.2022.05.20a' of git://git./linux/kernel/git/paulmck/linux-rcu
Pull nolibc library updates from Paul McKenney:
"This adds a number of library functions and splits this library into
multiple files"
* tag 'nolibc.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (61 commits)
tools/nolibc/string: Implement `strdup()` and `strndup()`
tools/nolibc/string: Implement `strnlen()`
tools/nolibc/stdlib: Implement `malloc()`, `calloc()`, `realloc()` and `free()`
tools/nolibc/types: Implement `offsetof()` and `container_of()` macro
tools/nolibc/sys: Implement `mmap()` and `munmap()`
tools/nolibc: i386: Implement syscall with 6 arguments
tools/nolibc: Remove .global _start from the entry point code
tools/nolibc: Replace `asm` with `__asm__`
tools/nolibc: x86-64: Update System V ABI document link
tools/nolibc/stdlib: only reference the external environ when inlined
tools/nolibc/string: do not use __builtin_strlen() at -O0
tools/nolibc: add the nolibc subdir to the common Makefile
tools/nolibc: add a makefile to install headers
tools/nolibc/types: add poll() and waitpid() flag definitions
tools/nolibc/sys: add syscall definition for getppid()
tools/nolibc/string: add strcmp() and strncmp()
tools/nolibc/stdio: add support for '%p' to vfprintf()
tools/nolibc/stdlib: add a simple getenv() implementation
tools/nolibc/stdio: make printf(%s) accept NULL
tools/nolibc/stdlib: implement abort()
...
Linus Torvalds [Mon, 23 May 2022 18:27:24 +0000 (11:27 -0700)]
Merge tag 'efi-next-for-v5.19' of git://git./linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Allow runtime services to be re-enabled at boot on RT kernels.
- Provide access to secrets injected into the boot image by CoCo
hypervisors (COnfidential COmputing)
- Use DXE services on x86 to make the boot image executable after
relocation, if needed.
- Prefer mirrored memory for randomized allocations.
- Only randomize the placement of the kernel image on arm64 if the
loader has not already done so.
- Add support for obtaining the boot hartid from EFI on RISC-V.
* tag 'efi-next-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
efi: stub: prefer mirrored memory for randomized allocations
efi/arm64: libstub: run image in place if randomized by the loader
efi: libstub: pass image handle to handle_kernel_image()
efi: x86: Set the NX-compatibility flag in the PE header
efi: libstub: ensure allocated memory to be executable
efi: libstub: declare DXE services table
efi: Add missing prototype for efi_capsule_setup_info
docs: security: Add secrets/coco documentation
efi: Register efi_secret platform device if EFI secret area is declared
virt: Add efi_secret module to expose confidential computing secrets
efi: Save location of EFI confidential computing area
efi: Allow to enable EFI runtime services by default on RT
Linus Torvalds [Sun, 22 May 2022 19:52:31 +0000 (09:52 -1000)]
Linux 5.18
David Howells [Sat, 21 May 2022 07:18:28 +0000 (08:18 +0100)]
afs: Fix afs_getattr() to refetch file status if callback break occurred
If a callback break occurs (change notification), afs_getattr() needs to
issue an FS.FetchStatus RPC operation to update the status of the file
being examined by the stat-family of system calls.
Fix afs_getattr() to do this if AFS_VNODE_CB_PROMISED has been cleared
on a vnode by a callback break. Skip this if AT_STATX_DONT_SYNC is set.
This can be tested by appending to a file on one AFS client and then
using "stat -L" to examine its length on a machine running kafs. This
can also be watched through tracing on the kafs machine. The callback
break is seen:
kworker/1:1-46 [001] ..... 978.910812: afs_cb_call: c=
0000005f YFSCB.CallBack
kworker/1:1-46 [001] ...1. 978.910829: afs_cb_break: 100058:23b4c:
242d2c2 b=2 s=1 break-cb
kworker/1:1-46 [001] ..... 978.911062: afs_call_done: c=
0000005f ret=0 ab=0 [
0000000082994ead]
And then the stat command generated no traffic if unpatched, but with
this change a call to fetch the status can be observed:
stat-4471 [000] ..... 986.744122: afs_make_fs_call: c=
000000ab 100058:023b4c:
242d2c2 YFS.FetchStatus
stat-4471 [000] ..... 986.745578: afs_call_done: c=
000000ab ret=0 ab=0 [
0000000087fc8c84]
Fixes:
08e0e7c82eea ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
Tested-by: kafs-testing+fedora34_64checkkafs-build-496@auristor.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216010
Link: https://lore.kernel.org/r/165308359800.162686.14122417881564420962.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 22 May 2022 18:04:38 +0000 (08:04 -1000)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some I2C driver bugfixes for 5.18. Nothing spectacular but worth
fixing"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()
Linus Torvalds [Sun, 22 May 2022 00:14:02 +0000 (14:14 -1000)]
Merge tag 'perf-tools-fixes-for-v5.18-2022-05-21' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT events
in 'perf stat'.
- Fix x86's arch__intr_reg_mask() for the hybrid platform.
- Address 'perf bench numa' compiler error on s390.
- Fix check for btf__load_from_kernel_by_id() in libbpf.
- Fix "all PMU test" 'perf test' to skip hv_24x7/hv_gpci tests on
powerpc.
- Fix session topology test to skip the test in guest environment.
- Skip BPF 'perf test' if clang is not present.
- Avoid shell test description infinite loop in 'perf test'.
- Fix Intel LBR callstack entries and nr print message.
* tag 'perf-tools-fixes-for-v5.18-2022-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf session: Fix Intel LBR callstack entries and nr print message
perf test bpf: Skip test if clang is not present
perf test session topology: Fix test to skip the test in guest environment
perf bench numa: Address compiler error on s390
perf test: Avoid shell test description infinite loop
perf regs x86: Fix arch__intr_reg_mask() for the hybrid platform
perf test: Fix "all PMU test" to skip hv_24x7/hv_gpci tests on powerpc
perf stat: Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT events
perf build: Fix check for btf__load_from_kernel_by_id() in libbpf
Linus Torvalds [Sat, 21 May 2022 23:58:43 +0000 (13:58 -1000)]
Merge tag 'input-for-v5.18-rc7' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A small fixup to ili210x touchscreen driver, and updated maintainer
entry for the device tree binding of Mediatek 6779 keypad:
- fix reset timing of Ilitek touchscreens
- update maintainer entry of DT binding of Mediatek 6779 keypad"
* tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ili210x - use one common reset implementation
Input: ili210x - fix reset timing
dt-bindings: input: mediatek,mt6779-keypad: update maintainer
Linus Torvalds [Sat, 21 May 2022 23:31:50 +0000 (13:31 -1000)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches, both in drivers.
The iscsi one is fixing the cpumask issue you commented on and the ufs
one is a late arriving fix for conditions that can occur in Host
Performance Booster reads"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix referencing invalid rsp field
scsi: target: Fix incorrect use of cpumask_t
Chengdong Li [Tue, 17 May 2022 01:57:26 +0000 (09:57 +0800)]
perf session: Fix Intel LBR callstack entries and nr print message
When generating callstack information from branch_stack(Intel LBR), the
actual number of callstack entry should be bigger than the number of
branch_stack, for example:
branch_stack records:
B() -> C()
A() -> B()
converted callstack records should be:
C()
B()
A()
though, the number of callstack equals
to the number of branch stack plus 1.
This patch fixes above issue in branch_stack__printf(). For example,
# echo 'scale=2000; 4*a(1)' > cmd
# perf record --call-graph lbr bc -l < cmd
Before applying this patch, `perf script -D` output:
1220022677386876 0x2a40 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x4002): 17990/17990: 0x40a6d6 period: 894172 addr: 0
... LBR call chain: nr:8
..... 0:
fffffffffffffe00
..... 1:
000000000040a410
..... 2:
000000000040573c
..... 3:
0000000000408650
..... 4:
00000000004022f2
..... 5:
00000000004015f5
..... 6:
00007f5ed6dcb553
..... 7:
0000000000401698
... FP chain: nr:2
..... 0:
fffffffffffffe00
..... 1:
000000000040a6d8
... branch callstack: nr:6 # which is not consistent with LBR records.
..... 0:
000000000040a410
..... 1:
0000000000408650 # ditto
..... 2:
00000000004022f2
..... 3:
00000000004015f5
..... 4:
00007f5ed6dcb553
..... 5:
0000000000401698
... thread: bc:17990
...... dso: /usr/bin/bc
bc 17990
1220022.677386: 894172 cycles:
40a410 [unknown] (/usr/bin/bc)
40573c [unknown] (/usr/bin/bc)
408650 [unknown] (/usr/bin/bc)
4022f2 [unknown] (/usr/bin/bc)
4015f5 [unknown] (/usr/bin/bc)
7f5ed6dcb553 __libc_start_main+0xf3 (/usr/lib64/libc-2.17.so)
401698 [unknown] (/usr/bin/bc)
After applied:
1220022677386876 0x2a40 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x4002): 17990/17990: 0x40a6d6 period: 894172 addr: 0
... LBR call chain: nr:8
..... 0:
fffffffffffffe00
..... 1:
000000000040a410
..... 2:
000000000040573c
..... 3:
0000000000408650
..... 4:
00000000004022f2
..... 5:
00000000004015f5
..... 6:
00007f5ed6dcb553
..... 7:
0000000000401698
... FP chain: nr:2
..... 0:
fffffffffffffe00
..... 1:
000000000040a6d8
... branch callstack: nr:7
..... 0:
000000000040a410
..... 1:
000000000040573c
..... 2:
0000000000408650
..... 3:
00000000004022f2
..... 4:
00000000004015f5
..... 5:
00007f5ed6dcb553
..... 6:
0000000000401698
... thread: bc:17990
...... dso: /usr/bin/bc
bc 17990
1220022.677386: 894172 cycles:
40a410 [unknown] (/usr/bin/bc)
40573c [unknown] (/usr/bin/bc)
408650 [unknown] (/usr/bin/bc)
4022f2 [unknown] (/usr/bin/bc)
4015f5 [unknown] (/usr/bin/bc)
7f5ed6dcb553 __libc_start_main+0xf3 (/usr/lib64/libc-2.17.so)
401698 [unknown] (/usr/bin/bc)
Change from v1:
- refined code style according to Jiri's review comments.
Signed-off-by: Chengdong Li <chengdongli@tencent.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: likexu@tencent.com
Link: https://lore.kernel.org/r/20220517015726.96131-1-chengdongli@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Wed, 11 May 2022 11:54:38 +0000 (17:24 +0530)]
perf test bpf: Skip test if clang is not present
Perf BPF filter test fails in environment where "clang" is not
installed.
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Skip
42.2: BPF pinning : FAILED!
42.3: BPF prologue generation : FAILED!
<<>>
Enabling verbose option provided debug logs which says clang/llvm needs
to be installed. Snippet of verbose logs:
<<>>
42.2: BPF pinning :
--- start ---
test child forked, pid 61423
ERROR: unable to find clang.
Hint: Try to install latest clang/llvm to support BPF.
Check your $PATH
<<logs_here>>
Failed to compile test case: 'Basic BPF llvm compile'
Unable to get BPF object, fix kbuild first
test child finished with -1
---- end ----
BPF filter subtest 2: FAILED!
<<>>
Here subtests, "BPF pinning" and "BPF prologue generation" failed and
logs shows clang/llvm is needed. After installing clang, testcase
passes.
Reason on why subtest failure happens though logs has proper debug
information:
Main function __test__bpf calls test_llvm__fetch_bpf_obj by
passing 4th argument as true ( 4th arguments maps to parameter
"force" in test_llvm__fetch_bpf_obj ). But this will cause
test_llvm__fetch_bpf_obj to skip the check for clang/llvm.
Snippet of code part which checks for clang based on
parameter "force" in test_llvm__fetch_bpf_obj:
<<>>
if (!force && (!llvm_param.user_set_param &&
<<>>
Since force is set to "false", test won't get skipped and fails to
compile test case. The BPF code compilation needs clang, So pass the
fourth argument as "false" and also skip the test if reason for return
is "TEST_SKIP"
After the patch:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Skip
42.2: BPF pinning : Skip
42.3: BPF prologue generation : Skip
<<>>
Fixes:
ba1fae431e74bb42 ("perf test: Add 'perf test BPF'")
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lore.kernel.org/r/20220511115438.84032-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Wed, 11 May 2022 11:49:59 +0000 (17:19 +0530)]
perf test session topology: Fix test to skip the test in guest environment
The session topology test fails in powerpc pSeries platform.
Test logs:
<<>>
Session topology : FAILED!
<<>>
This testcases tests cpu topology by checking the core_id and socket_id
stored in perf_env from perf session. The data from perf session is
compared with the cpu topology information from
"/sys/devices/system/cpu/cpuX/topology" like core_id,
physical_package_id.
In case of virtual environment, detail like physical_package_id is
restricted to be exposed. Hence physical_package_id is set to -1. The
testcase fails on such platforms since socket_id can't be fetched from
topology info.
Skip the testcase in powerpc if physical_package_id returns -1.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>---
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220511114959.84002-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Richter [Fri, 20 May 2022 08:11:58 +0000 (10:11 +0200)]
perf bench numa: Address compiler error on s390
The compilation on s390 results in this error:
# make DEBUG=y bench/numa.o
...
bench/numa.c: In function ‘__bench_numa’:
bench/numa.c:1749:81: error: ‘%d’ directive output may be truncated
writing between 1 and 11 bytes into a region of size between
10 and 20 [-Werror=format-truncation=]
1749 | snprintf(tname, sizeof(tname), "process%d:thread%d", p, t);
^~
...
bench/numa.c:1749:64: note: directive argument in the range
[-
2147483647,
2147483646]
...
#
The maximum length of the %d replacement is 11 characters because of the
negative sign. Therefore extend the array by two more characters.
Output after:
# make DEBUG=y bench/numa.o > /dev/null 2>&1; ll bench/numa.o
-rw-r--r-- 1 root root 418320 May 19 09:11 bench/numa.o
#
Fixes:
3aff8ba0a4c9c919 ("perf bench numa: Avoid possible truncation when using snprintf()")
Suggested-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220520081158.2990006-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Tue, 17 May 2022 20:41:44 +0000 (13:41 -0700)]
perf test: Avoid shell test description infinite loop
for_each_shell_test() is already strict in expecting tests to be files
and executable. It is sometimes possible when it iterates over all files
that it finds one that is executable and lacks a newline character. When
this happens the loop never terminates as it doesn't check for EOF.
Add the EOF check to make this loop at least bounded by the file size.
If the description is returned as NULL then also skip the test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220517204144.645913-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kan Liang [Wed, 18 May 2022 14:51:25 +0000 (07:51 -0700)]
perf regs x86: Fix arch__intr_reg_mask() for the hybrid platform
The X86 specific arch__intr_reg_mask() is to check whether the kernel
and hardware can collect XMM registers. But it doesn't work on some
hybrid platform.
Without the patch on ADL-N:
$ perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
R11 R12 R13 R14 R15
The config of the test event doesn't contain the PMU information. The
kernel may fail to initialize it on the correct hybrid PMU and return
the wrong non-supported information.
Add the PMU information into the config for the hybrid platform. The
same register set is supported among different hybrid PMUs. Checking
the first available one is good enough.
With the patch on ADL-N:
$ perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
R11 R12 R13 R14 R15 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 XMM9
XMM10 XMM11 XMM12 XMM13 XMM14 XMM15
Fixes:
6466ec14aaf44ff1 ("perf regs x86: Add X86 specific arch__intr_reg_mask()")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518145125.1494156-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Fri, 20 May 2022 10:12:36 +0000 (15:42 +0530)]
perf test: Fix "all PMU test" to skip hv_24x7/hv_gpci tests on powerpc
"perf all PMU test" picks the input events from "perf list --raw-dump
pmu" list and runs "perf stat -e" for each of the event in the list. In
case of powerpc, the PowerVM environment supports events from hv_24x7
and hv_gpci PMU which is of example format like below:
- hv_24x7/CPM_ADJUNCT_INST,domain=?,core=?/
- hv_gpci/event,partition_id=?/
The value for "?" needs to be filled in depending on system and
respective event. CPM_ADJUNCT_INST needs have core value and domain
value. hv_gpci event needs partition_id. Similarly, there are other
events for hv_24x7 and hv_gpci having "?" in event format. Hence skip
these events on powerpc platform since values like partition_id, domain
is specific to system and event.
Fixes:
3d5ac9effcc640d5 ("perf test: Workload test of all PMUs")
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20220520101236.17249-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jens Axboe [Sat, 21 May 2022 15:17:05 +0000 (09:17 -0600)]
io_uring: cleanup handling of the two task_work lists
Rather than pass in a bool for whether or not this work item needs to go
into the priority list or not, provide separate helpers for it. For most
use cases, this also then gets rid of the branch for non-priority task
work.
While at it, rename the prior_task_list to prio_task_list. Prior is
a confusing name for it, as it would seem to indicate that this is the
previous task_work list. prio makes it clear that this is a priority
task_work list.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Julia Lawall [Sat, 21 May 2022 11:10:38 +0000 (13:10 +0200)]
mtip32xx: fix typo in comment
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220521111145.81697-28-Julia.Lawall@inria.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Julia Lawall [Sat, 21 May 2022 11:10:39 +0000 (13:10 +0200)]
blk-mq: fix typo in comment
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220521111145.81697-29-Julia.Lawall@inria.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Piyush Malgujar [Wed, 11 May 2022 13:36:59 +0000 (06:36 -0700)]
drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
Due to i2c->adap.dev.fwnode not being set, ACPI_COMPANION() wasn't properly
found for TWSI controllers.
Signed-off-by: Szymon Balcerak <sbalcerak@marvell.com>
Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Mika Westerberg [Wed, 27 Apr 2022 10:19:10 +0000 (13:19 +0300)]
i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
Before sending a MSI the hardware writes information pertinent to the
interrupt cause to a memory location pointed by SMTICL register. This
memory holds three double words where the least significant bit tells
whether the interrupt cause of master/target/error is valid. The driver
does not use this but we need to set it up because otherwise it will
perform DMA write to the default address (0) and this will cause an
IOMMU fault such as below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write] Request device [00:12.0] PASID
ffffffff fault addr 0
[fault reason 05] PTE Write access is not set
To prevent this from happening, provide a proper DMA buffer for this
that then gets mapped by the IOMMU accordingly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Yang Yingliang [Sat, 14 May 2022 02:31:47 +0000 (10:31 +0800)]
i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()
Fix the missing clk_disable_unprepare() before return
from mtk_i2c_probe() in the error handling case.
Fixes:
d04913ec5f89 ("i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Linus Torvalds [Sat, 21 May 2022 06:34:59 +0000 (20:34 -1000)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly expose GICv3 support even if no irqchip is created so
that userspace doesn't observe it changing pointlessly (fixing a
regression with QEMU)
- Don't issue a hypercall to set the id-mapped vectors when protected
mode is enabled (fix for pKVM in combination with CPUs affected by
Spectre-v3a)
x86 (five oneliners, of which the most interesting two are):
- a NULL pointer dereference on INVPCID executed with paging
disabled, but only if KVM is using shadow paging
- an incorrect bsearch comparison function which could truncate the
result and apply PMU event filtering incorrectly. This one comes
with a selftests update too"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix NULL pointer dereference on guest INVPCID
KVM: x86: hyper-v: fix type of valid_bank_mask
KVM: Free new dirty bitmap if creating a new memslot fails
KVM: eventfd: Fix false positive RCU usage warning
selftests: kvm/x86: Verify the pmu event filter matches the correct event
selftests: kvm/x86: Add the helper function create_pmu_event_filter
kvm: x86/pmu: Fix the compare function used by the pmu event filter
KVM: arm64: Don't hypercall before EL2 init
KVM: arm64: vgic-v3: Consistently populate ID_AA64PFR0_EL1.GIC
KVM: x86/mmu: Update number of zapped pages even if page list is stable
Linus Torvalds [Sat, 21 May 2022 05:07:28 +0000 (19:07 -1000)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Three clk driver fixes to close out the release
- Fix a divider calculation breaking boot on Broadcom bcm2835
- Fix HDMI output on Tanix TX6 mini board by reverting a patch
- Fix clk_set_rate_range() calls on at91 by considering the range
while calculating the divisor"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: at91: generated: consider range when calculating best rate
Revert "clk: sunxi-ng: sun6i-rtc: Add support for H6"
clk: bcm2835: fix bcm2835_clock_choose_div
Linus Torvalds [Sat, 21 May 2022 04:58:37 +0000 (18:58 -1000)]
Merge tag 'drm-fixes-2022-05-21' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Few final fixes for 5.18, one amdgpu, core dp mst leak fix, dma-buf
two fixes, and i915 has a few fixes, one for a regression on older
GM45 chipsets,
dma-buf:
- ioctl userspace use fix
- fix dma-buf sysfs name generation
core:
- dp/mst leak fix
amdgpu:
- suspend/resume regression fix
i915:
- fix for #5806: GPU hangs and display artifacts on Intel GM45
- reject DMC with out-of-spec MMIO
- correctly mark guilty contexts on GuC reset"
* tag 'drm-fixes-2022-05-21' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomap
drm/amd: Don't reset dGPUs if the system is going to s2idle
drm/dp/mst: fix a possible memory leak in fetch_monitor_name()
dma-buf: fix use of DMA_BUF_SET_NAME_{A,B} in userspace
i915/guc/reset: Make __guc_reset_context aware of guilty engines
drm/i915/dmc: Add MMIO range restrictions
dma-buf: ensure unique directory name for dmabuf stats
Dave Airlie [Fri, 20 May 2022 20:00:48 +0000 (06:00 +1000)]
Merge tag 'drm-intel-fixes-2022-05-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- fix for #5806: GPU hangs and display artifacts on 5.18-rc3 on Intel GM45
- reject DMC with out-of-spec MMIO (Cc: stable)
- correctly mark guilty contexts on GuC reset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YocqqvG6PbYx3QgJ@jlahtine-mobl.ger.corp.intel.com
Dave Airlie [Fri, 20 May 2022 19:58:59 +0000 (05:58 +1000)]
Merge tag 'drm-misc-fixes-2022-05-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fix for a memory leak in dp_mst, a (userspace) build fix for
DMA_BUF_SET_NAME defines and a directory name generation fix for dmabuf
stats
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520072408.cpjzy2taugagvrh7@houat
Peter Zijlstra [Fri, 20 May 2022 18:38:06 +0000 (20:38 +0200)]
perf: Fix sys_perf_event_open() race against self
Norbert reported that it's possible to race sys_perf_event_open() such
that the looser ends up in another context from the group leader,
triggering many WARNs.
The move_group case checks for races against itself, but the
!move_group case doesn't, seemingly relying on the previous
group_leader->ctx == ctx check. However, that check is racy due to not
holding any locks at that time.
Therefore, re-check the result after acquiring locks and bailing
if they no longer match.
Additionally, clarify the not_move_group case from the
move_group-vs-move_group race.
Fixes:
f63a8daa5812 ("perf: Fix event->ctx locking")
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 20 May 2022 18:26:28 +0000 (08:26 -1000)]
Merge tag 'gpio-fixes-for-v5.18' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix bitops logic in gpio-vf610
- return an error if the user tries to use inverted polarity in
gpio-mvebu
* tag 'gpio-fixes-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mvebu/pwm: Refuse requests with inverted polarity
gpio: gpio-vf610: do not touch other bits when set the target bit
Linus Torvalds [Fri, 20 May 2022 18:20:28 +0000 (08:20 -1000)]
Merge tag 'mmc-v5.18-rc4-2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
"MMC core:
- Fix busy polling for MMC_SEND_OP_COND again"
* tag 'mmc-v5.18-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Fix busy polling for MMC_SEND_OP_COND again
Linus Torvalds [Fri, 20 May 2022 18:15:40 +0000 (08:15 -1000)]
Merge tag 'ceph-for-5.18-rc8' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a nasty use-after-free, marked for stable"
* tag 'ceph-for-5.18-rc8' of https://github.com/ceph/ceph-client:
libceph: fix misleading ceph_osdc_cancel_request() comment
libceph: fix potential use-after-free on linger ping and resends
Linus Torvalds [Fri, 20 May 2022 18:13:32 +0000 (08:13 -1000)]
Merge tag 'riscv-for-linus-5.18-rc8' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- fix the fu540-c000 device tree to avoid a schema check failure on the
DMA node name
- fix typo in the PolarFire SOC device tree
* tag 'riscv-for-linus-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: microchip: fix gpio1 reg property typo
riscv: dts: sifive: fu540-c000: align dma node name with dtschema
Linus Torvalds [Fri, 20 May 2022 18:09:00 +0000 (08:09 -1000)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes for -rc8/final.
The MTE and stolen time fixes have been doing the rounds for a little
while, but review and testing feedback was ongoing until earlier this
week. The kexec fix showed up on Monday and addresses a failure
observed under Qemu.
Summary:
- Add missing write barrier to publish MTE tags before a pte update
- Fix kexec relocation clobbering its own data structures
- Fix stolen time crash if a timer IRQ fires during CPU hotplug"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Ensure the cleared tags are visible before setting the PTE
arm64: kexec: load from kimage prior to clobbering
arm64: paravirt: Use RCU read locks to guard stolen_time
Paolo Bonzini [Fri, 20 May 2022 17:48:11 +0000 (13:48 -0400)]
KVM: x86/mmu: fix NULL pointer dereference on guest INVPCID
With shadow paging enabled, the INVPCID instruction results in a call
to kvm_mmu_invpcid_gva. If INVPCID is executed with CR0.PG=0, the
invlpg callback is not set and the result is a NULL pointer dereference.
Fix it trivially by checking for mmu->invlpg before every call.
There are other possibilities:
- check for CR0.PG, because KVM (like all Intel processors after P5)
flushes guest TLB on CR0.PG changes so that INVPCID/INVLPG are a
nop with paging disabled
- check for EFER.LMA, because KVM syncs and flushes when switching
MMU contexts outside of 64-bit mode
All of these are tricky, go for the simple solution. This is CVE-2022-1789.
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yury Norov [Thu, 19 May 2022 17:15:04 +0000 (10:15 -0700)]
KVM: x86: hyper-v: fix type of valid_bank_mask
In kvm_hv_flush_tlb(), valid_bank_mask is declared as unsigned long,
but is used as u64, which is wrong for i386, and has been spotted by
LKP after applying "KVM: x86: hyper-v: replace bitmap_weight() with
hweight64()"
https://lore.kernel.org/lkml/
20220510154750.212913-12-yury.norov@gmail.com/
But it's wrong even without that patch because now bitmap_weight()
dereferences a word after valid_bank_mask on i386.
>> include/asm-generic/bitops/const_hweight.h:21:76: warning: right shift count >= width of type
+[-Wshift-count-overflow]
21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
| ^~
include/asm-generic/bitops/const_hweight.h:10:16: note: in definition of macro '__const_hweight8'
10 | ((!!((w) & (1ULL << 0))) + \
| ^
include/asm-generic/bitops/const_hweight.h:20:31: note: in expansion of macro '__const_hweight16'
20 | #define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16))
| ^~~~~~~~~~~~~~~~~
include/asm-generic/bitops/const_hweight.h:21:54: note: in expansion of macro '__const_hweight32'
21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
| ^~~~~~~~~~~~~~~~~
include/asm-generic/bitops/const_hweight.h:29:49: note: in expansion of macro '__const_hweight64'
29 | #define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w))
| ^~~~~~~~~~~~~~~~~
arch/x86/kvm/hyperv.c:1983:36: note: in expansion of macro 'hweight64'
1983 | if (hc->var_cnt != hweight64(valid_bank_mask))
| ^~~~~~~~~
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: Jim Mattson <jmattson@google.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Sean Christopherson <seanjc@google.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
CC: Wanpeng Li <wanpengli@tencent.com>
CC: kvm@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: x86@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Message-Id: <
20220519171504.
1238724-1-yury.norov@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 18 May 2022 00:38:42 +0000 (00:38 +0000)]
KVM: Free new dirty bitmap if creating a new memslot fails
Fix a goof in kvm_prepare_memory_region() where KVM fails to free the
new memslot's dirty bitmap during a CREATE action if
kvm_arch_prepare_memory_region() fails. The logic is supposed to detect
if the bitmap was allocated and thus needs to be freed, versus if the
bitmap was inherited from the old memslot and thus needs to be kept. If
there is no old memslot, then obviously the bitmap can't have been
inherited
The bug was exposed by commit
86931ff7207b ("KVM: x86/mmu: Do not create
SPTEs for GFNs that exceed host.MAXPHYADDR"), which made it trivally easy
for syzkaller to trigger failure during kvm_arch_prepare_memory_region(),
but the bug can be hit other ways too, e.g. due to -ENOMEM when
allocating x86's memslot metadata.
The backtrace from kmemleak:
__vmalloc_node_range+0xb40/0xbd0 mm/vmalloc.c:3195
__vmalloc_node mm/vmalloc.c:3232 [inline]
__vmalloc+0x49/0x50 mm/vmalloc.c:3246
__vmalloc_array mm/util.c:671 [inline]
__vcalloc+0x49/0x70 mm/util.c:694
kvm_alloc_dirty_bitmap virt/kvm/kvm_main.c:1319
kvm_prepare_memory_region virt/kvm/kvm_main.c:1551
kvm_set_memslot+0x1bd/0x690 virt/kvm/kvm_main.c:1782
__kvm_set_memory_region+0x689/0x750 virt/kvm/kvm_main.c:1949
kvm_set_memory_region virt/kvm/kvm_main.c:1962
kvm_vm_ioctl_set_memory_region virt/kvm/kvm_main.c:1974
kvm_vm_ioctl+0x377/0x13a0 virt/kvm/kvm_main.c:4528
vfs_ioctl fs/ioctl.c:51
__do_sys_ioctl fs/ioctl.c:870
__se_sys_ioctl fs/ioctl.c:856
__x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
And the relevant sequence of KVM events:
ioctl(3, KVM_CREATE_VM, 0) = 4
ioctl(4, KVM_SET_USER_MEMORY_REGION, {slot=0,
flags=KVM_MEM_LOG_DIRTY_PAGES,
guest_phys_addr=0x10000000000000,
memory_size=4096,
userspace_addr=0x20fe8000}
) = -1 EINVAL (Invalid argument)
Fixes:
244893fa2859 ("KVM: Dynamically allocate "new" memslots from the get-go")
Cc: stable@vger.kernel.org
Reported-by: syzbot+8606b8a9cc97a63f1c87@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220518003842.
1341782-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Uwe Kleine-König [Wed, 11 May 2022 07:58:56 +0000 (09:58 +0200)]
gpio: mvebu/pwm: Refuse requests with inverted polarity
The driver doesn't take struct pwm_state::polarity into account when
configuring the hardware, so refuse requests for inverted polarity.
Fixes:
757642f9a584 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Haibo Chen [Wed, 11 May 2022 02:15:04 +0000 (10:15 +0800)]
gpio: gpio-vf610: do not touch other bits when set the target bit
For gpio controller contain register PDDR, when set one target bit,
current logic will clear all other bits, this is wrong. Use operator
'|=' to fix it.
Fixes:
659d8a62311f ("gpio: vf610: add imx7ulp support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Ian Rogers [Thu, 19 May 2022 03:20:01 +0000 (20:20 -0700)]
perf stat: Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT events
Stat events can come from disk and so need a degree of validation. They
contain a CPU which needs looking up via CPU map to access a counter.
Add the CPU to index translation, alongside validity checking.
Discussion thread:
https://lore.kernel.org/linux-perf-users/CAP-5=fWQR=sCuiSMktvUtcbOLidEpUJLCybVF6=BRvORcDOq+g@mail.gmail.com/
Fixes:
7ac0089d138f80dc ("perf evsel: Pass cpu not cpu map index to synthesize")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Suggested-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lv Ruyi <lv.ruyi@zte.com.cn>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220519032005.1273691-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wanpeng Li [Thu, 19 May 2022 08:49:13 +0000 (01:49 -0700)]
KVM: eventfd: Fix false positive RCU usage warning
The splat below can be seen when running kvm-unit-test:
=============================
WARNING: suspicious RCU usage
5.18.0-rc7 #5 Tainted: G IOE
-----------------------------
/home/kernel/linux/arch/x86/kvm/../../../virt/kvm/eventfd.c:80 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
4 locks held by qemu-system-x86/35124:
#0:
ffff9725391d80b8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x77/0x710 [kvm]
#1:
ffffbd25cfb2a0b8 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0xdeb/0x1900 [kvm]
#2:
ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: kvm_hv_notify_acked_sint+0x79/0x1e0 [kvm]
#3:
ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: irqfd_resampler_ack+0x5/0x110 [kvm]
stack backtrace:
CPU: 2 PID: 35124 Comm: qemu-system-x86 Tainted: G IOE 5.18.0-rc7 #5
Call Trace:
<TASK>
dump_stack_lvl+0x6c/0x9b
irqfd_resampler_ack+0xfd/0x110 [kvm]
kvm_notify_acked_gsi+0x32/0x90 [kvm]
kvm_hv_notify_acked_sint+0xc5/0x1e0 [kvm]
kvm_hv_set_msr_common+0xec1/0x1160 [kvm]
kvm_set_msr_common+0x7c3/0xf60 [kvm]
vmx_set_msr+0x394/0x1240 [kvm_intel]
kvm_set_msr_ignored_check+0x86/0x200 [kvm]
kvm_emulate_wrmsr+0x4f/0x1f0 [kvm]
vmx_handle_exit+0x6fb/0x7e0 [kvm_intel]
vcpu_enter_guest+0xe5a/0x1900 [kvm]
kvm_arch_vcpu_ioctl_run+0x16e/0xac0 [kvm]
kvm_vcpu_ioctl+0x279/0x710 [kvm]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
resampler-list is protected by irq_srcu (see kvm_irqfd_assign), so fix
the false positive by using list_for_each_entry_srcu().
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <
1652950153-12489-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jens Axboe [Fri, 20 May 2022 12:56:32 +0000 (06:56 -0600)]
Merge tag 'nvme-5.19-2022-05-19' of git://git.infradead.org/nvme into for-5.19/drivers
Pull NVMe updates from Christoph:
"nvme updates for Linux 5.19
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (me)"
* tag 'nvme-5.19-2022-05-19' of git://git.infradead.org/nvme:
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
Arnaldo Carvalho de Melo [Fri, 20 May 2022 00:25:12 +0000 (21:25 -0300)]
perf build: Fix check for btf__load_from_kernel_by_id() in libbpf
Avi Kivity reported a problem where the __weak
btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being
used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in
turn called back to btf__load_from_kernel_by_id(), resulting in an
endless loop.
Fix this by adding a feature test to check if
btf__load_from_kernel_by_id() is available when building perf with
LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old
btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id()
since at that time it didn't exist at all.
Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC
where we don't have btf__load_from_kernel_by_id() and thus its feature
test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID:
$ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output
test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’:
test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration]
6 | return btf__load_from_kernel_by_id(
20151128, NULL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$
$ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id
00000000005ba180 T btf__load_from_kernel_by_id
$
$ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf
/tmp/build/perf-urgent/perf: file format elf64-x86-64
<SNIP>
00000000005ba180 <btf__load_from_kernel_by_id>:
#include "record.h"
#include "util/synthetic-events.h"
#ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
struct btf *btf__load_from_kernel_by_id(__u32 id)
{
5ba180: 55 push %rbp
5ba181: 48 89 e5 mov %rsp,%rbp
5ba184: 48 83 ec 10 sub $0x10,%rsp
5ba188: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax
5ba18f: 00 00
5ba191: 48 89 45 f8 mov %rax,-0x8(%rbp)
5ba195: 31 c0 xor %eax,%eax
struct btf *btf;
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wdeprecated-declarations"
int err = btf__get_from_id(id, &btf);
5ba197: 48 8d 75 f0 lea -0x10(%rbp),%rsi
5ba19b: e8 a0 57 e5 ff call 40f940 <btf__get_from_id@plt>
5ba1a0: 89 c2 mov %eax,%edx
#pragma GCC diagnostic pop
return err ? ERR_PTR(err) : btf;
5ba1a2: 48 98 cltq
5ba1a4: 85 d2 test %edx,%edx
5ba1a6: 48 0f 44 45 f0 cmove -0x10(%rbp),%rax
}
<SNIP>
Fixes:
218e7b775d368f38 ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions")
Reported-by: Avi Kivity <avi@scylladb.com>
Link: https://lore.kernel.org/linux-perf-users/f0add43b-3de5-20c5-22c4-70aff4af959f@scylladb.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/YobjjFOblY4Xvwo7@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kanchan Joshi [Fri, 20 May 2022 09:06:30 +0000 (14:36 +0530)]
nvme: enable uring-passthrough for admin commands
Add two new opcodes that userspace can use for admin commands:
NVME_URING_CMD_ADMIN : non-vectroed
NVME_URING_CMD_ADMIN_VEC : vectored variant
Wire up support when these are issued on controller node(/dev/nvmeX).
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220520090630.70394-3-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kanchan Joshi [Fri, 20 May 2022 09:06:29 +0000 (14:36 +0530)]
nvme: helper for uring-passthrough checks
Factor out a helper consolidating the error checks, and fix typo in a
comment too. This is in preparation to support admin commands on this
path.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220520090630.70394-2-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Aaron Lewis [Tue, 17 May 2022 05:12:38 +0000 (05:12 +0000)]
selftests: kvm/x86: Verify the pmu event filter matches the correct event
Add a test to demonstrate that when the guest programs an event select
it is matched correctly in the pmu event filter and not inadvertently
filtered. This could happen on AMD if the high nybble[1] in the event
select gets truncated away only leaving the bottom byte[2] left for
matching.
This is a contrived example used for the convenience of demonstrating
this issue, however, this can be applied to event selects 0x28A (OC
Mode Switch) and 0x08A (L1 BTB Correction), where 0x08A could end up
being denied when the event select was only set up to deny 0x28A.
[1] bits 35:32 in the event select register and bits 11:8 in the event
select.
[2] bits 7:0 in the event select register and bits 7:0 in the event
select.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <
20220517051238.
2566934-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Aaron Lewis [Tue, 17 May 2022 05:12:37 +0000 (05:12 +0000)]
selftests: kvm/x86: Add the helper function create_pmu_event_filter
Add a helper function that creates a pmu event filter given an event
list. Currently, a pmu event filter can only be created with the same
hard coded event list. Add a way to create one given a different event
list.
Also, rename make_pmu_event_filter to alloc_pmu_event_filter to clarify
it's purpose given the introduction of create_pmu_event_filter.
No functional changes intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <
20220517051238.
2566934-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Aaron Lewis [Tue, 17 May 2022 05:12:36 +0000 (05:12 +0000)]
kvm: x86/pmu: Fix the compare function used by the pmu event filter
When returning from the compare function the u64 is truncated to an
int. This results in a loss of the high nybble[1] in the event select
and its sign if that nybble is in use. Switch from using a result that
can end up being truncated to a result that can only be: 1, 0, -1.
[1] bits 35:32 in the event select register and bits 11:8 in the event
select.
Fixes:
7ff775aca48ad ("KVM: x86/pmu: Use binary search to check filtered events")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220517051238.
2566934-1-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Fri, 20 May 2022 06:04:17 +0000 (20:04 -1000)]
Merge tag 'v5.18-p2' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression in a recent fix to qcom-rng"
* tag 'v5.18-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qcom-rng - fix infinite loop on requests not multiple of WORD_SZ
Daejun Park [Thu, 19 May 2022 06:05:29 +0000 (15:05 +0900)]
scsi: ufs: core: Fix referencing invalid rsp field
Fix referencing sense data when it is invalid. When the length of the data
segment is 0, there is no valid information in the rsp field, so
ufshpb_rsp_upiu() is returned without additional operation.
Link: https://lore.kernel.org/r/252651381.41652940482659.JavaMail.epsvc@epcpadp4
Fixes:
4b5f49079c52 ("scsi: ufs: ufshpb: L2P map management for HPB read")
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Conor Paxton [Tue, 17 May 2022 10:40:58 +0000 (11:40 +0100)]
riscv: dts: microchip: fix gpio1 reg property typo
Fix reg address typo in the gpio1 stanza.
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes:
528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Link: https://lore.kernel.org/r/20220517104058.2004734-1-conor.paxton@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Chaitanya Kulkarni [Wed, 18 May 2022 15:51:38 +0000 (08:51 -0700)]
nvme: set non-mdts limits in nvme_scan_work
In current implementation we set the non-mdts limits by calling
nvme_init_non_mdts_limits() from nvme_init_ctrl_finish().
This also tries to set the limits for the discovery controller which
has no I/O queues resulting in the warning message reported by the
nvme_log_error() when running blktest nvme/002: -
[ 2005.155946] run blktests nvme/002 at 2022-04-09 16:57:47
[ 2005.192223] loop: module loaded
[ 2005.196429] nvmet: adding nsid 1 to subsystem blktests-subsystem-0
[ 2005.200334] nvmet: adding nsid 1 to subsystem blktests-subsystem-1
<------------------------------SNIP---------------------------------->
[ 2008.958108] nvmet: adding nsid 1 to subsystem blktests-subsystem-997
[ 2008.962082] nvmet: adding nsid 1 to subsystem blktests-subsystem-998
[ 2008.966102] nvmet: adding nsid 1 to subsystem blktests-subsystem-999
[ 2008.973132] nvmet: creating discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN testhostnqn.
*[ 2008.973196] nvme1: Identify(0x6), Invalid Field in Command (sct 0x0 / sc 0x2) MORE DNR*
[ 2008.974595] nvme nvme1: new ctrl: "nqn.2014-08.org.nvmexpress.discovery"
[ 2009.103248] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
Move the call of nvme_init_non_mdts_limits() to nvme_scan_work() after
we verify that I/O queues are created since that is a converging point
for each transport where these limits are actually used.
1. FC :
nvme_fc_create_association()
...
nvme_fc_create_io_queues(ctrl);
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
2. PCIe:-
nvme_reset_work()
...
nvme_setup_io_queues()
nvme_create_io_queues()
nvme_alloc_queue()
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
3. RDMA :-
nvme_rdma_setup_ctrl
...
nvme_rdma_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
4. TCP :-
nvme_tcp_setup_ctrl
...
nvme_tcp_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
* nvme_scan_work()
...
nvme_validate_or_alloc_ns()
nvme_alloc_ns()
nvme_update_ns_info()
nvme_update_disk_info()
nvme_config_discard() <---
blk_queue_max_write_zeroes_sectors() <---
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Krzysztof Kozlowski [Thu, 7 Apr 2022 19:38:56 +0000 (21:38 +0200)]
riscv: dts: sifive: fu540-c000: align dma node name with dtschema
Fixes dtbs_check warnings like:
dma@
3000000: $nodename:0: 'dma@
3000000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220407193856.18223-1-krzysztof.kozlowski@linaro.org
Fixes:
c5ab54e9945b ("riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Vasily Averin [Thu, 19 May 2022 14:30:49 +0000 (17:30 +0300)]
io_uring: fix incorrect __kernel_rwf_t cast
Currently 'make C=1 fs/io_uring.o' generates sparse warning:
CHECK fs/io_uring.c
fs/io_uring.c: note: in included file (through
include/trace/trace_events.h, include/trace/define_trace.h, i
nclude/trace/events/io_uring.h):
./include/trace/events/io_uring.h:488:1:
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] op_flags
got restricted __kernel_rwf_t const [usertype] rw_flags
This happen on cast of sqe->rw_flags which is defined as __kernel_rwf_t,
this type is bitwise and requires __force attribute for any casts.
However rw_flags is a member of the union, and its access can be safely
replaced by using of its neighbours, so let's use poll32_events to fix
the sparse warning.
Signed-off-by: Vasily Averin <vvs@openvz.org>
Link: https://lore.kernel.org/r/6f009241-a63f-ae43-a04b-62841aaef293@openvz.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 19 May 2022 16:10:09 +0000 (06:10 -1000)]
Merge tag 'for-5.18/parisc-4' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"We had two big outstanding issues after v5.18-rc6:
a) 32-bit kernels on 64-bit machines (e.g. on a C3700 which is able
to run 32- and 64-bit kernels) failed early in userspace.
b) 64-bit kernels on PA8800/PA8900 CPUs (e.g. in a C8000) showed
random userspace segfaults. We assumed that those problems were
caused by the tmpalias flushes.
Dave did a lot of testing and reorganization of the current flush code
and fixed the 32-bit cache flushing. For PA8800/PA8900 CPUs he
switched the code to flush using the virtual address of user and
kernel pages instead of using tmpalias flushes. The tmpalias flushes
don't seem to work reliable on such CPUs.
We tested the patches on a wide range machines (715/64, B160L, C3000,
C3700, C8000, rp3440) and they have been in for-next without any
conflicts.
Summary:
- Rewrite the cache flush code for PA8800/PA8900 CPUs to flush using
the virtual address of user and kernel pages instead of using
tmpalias flushes. Testing showed, that tmpalias flushes don't work
reliably on PA8800/PA8900 CPUs
- Fix flush code to allow 32-bit kernels to run on 64-bit capable
machines, e.g. a 32-bit kernel on C3700 machines"
* tag 'for-5.18/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix patch code locking and flushing
parisc: Rewrite cache flush code for PA8800/PA8900
parisc: Disable debug code regarding cache flushes in handle_nadtlb_fault()
Linus Torvalds [Thu, 19 May 2022 16:08:29 +0000 (06:08 -1000)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Two further fixes for Spectre-BHB from Ard for Cortex A15 and to use
the wide branch instruction for Thumb2"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2
ARM: 9196/1: spectre-bhb: enable for Cortex-A15
Linus Torvalds [Thu, 19 May 2022 16:02:41 +0000 (06:02 -1000)]
Merge tag 'pinctrl-v5.18-3' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix an altmode in the Ocelot driver
- Fix the IES control pins in the Mediatek MT8365 driver
- Sunxi (AMLogic) driver:
- Fix the UART2 function pin assignments
- Fix the signal name of the PA2 SPI pin
* tag 'pinctrl-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: f1c100s: Fix signal name comment for PA2 SPI pin
pinctrl: sunxi: fix f1c100s uart2 function
pinctrl: mediatek: mt8365: fix IES control pins
pinctrl: ocelot: Fix for lan966x alt mode
Linus Torvalds [Thu, 19 May 2022 15:50:29 +0000 (05:50 -1000)]
Merge tag 'net-5.18-rc8' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, xfrm and netfilter subtrees.
Notably this reverts a recent TCP/DCCP netns-related change to address
a possible UaF.
Current release - regressions:
- tcp: revert "tcp/dccp: get rid of inet_twsk_purge()"
- xfrm: set dst dev to blackhole_netdev instead of loopback_dev in
ifdown
Previous releases - regressions:
- netfilter: flowtable: fix TCP flow teardown
- can: revert "can: m_can: pci: use custom bit timings for Elkhart
Lake"
- xfrm: check encryption module availability consistency
- eth: vmxnet3: fix possible use-after-free bugs in
vmxnet3_rq_alloc_rx_buf()
- eth: mlx5: initialize flow steering during driver probe
- eth: ice: fix crash when writing timestamp on RX rings
Previous releases - always broken:
- mptcp: fix checksum byte order
- eth: lan966x: fix assignment of the MAC address
- eth: mlx5: remove HW-GRO from reported features
- eth: ftgmac100: disable hardware checksum on AST2600"
* tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
ptp: ocp: change sysfs attr group handling
selftests: forwarding: fix missing backslash
netfilter: nf_tables: disable expression reduction infra
netfilter: flowtable: move dst_check to packet path
netfilter: flowtable: fix TCP flow teardown
net: ftgmac100: Disable hardware checksum on AST2600
igb: skip phy status check where unavailable
nfc: pn533: Fix buggy cleanup order
mptcp: Do TCP fallback on early DSS checksum failure
mptcp: fix checksum byte order
net: af_key: check encryption module availability consistency
net: af_key: add check for pfkey_broadcast in function pfkey_process
net/mlx5: Drain fw_reset when removing device
net/mlx5e: CT: Fix setting flow_source for smfs ct tuples
net/mlx5e: CT: Fix support for GRE tuples
net/mlx5e: Remove HW-GRO from reported features
net/mlx5e: Properly block HW GRO when XDP is enabled
net/mlx5e: Properly block LRO when XDP is enabled
net/mlx5e: Block rx-gro-hw feature in switchdev mode
...
Ulf Hansson [Tue, 17 May 2022 10:10:46 +0000 (12:10 +0200)]
mmc: core: Fix busy polling for MMC_SEND_OP_COND again
It turned out that polling period for MMC_SEND_OP_COND, that currently is
set to 1ms, still isn't sufficient. In particular a Micron eMMC on a
Beaglebone platform, is reported to sometimes fail to initialize.
Additional test, shows that extending the period to 4ms is working fine, so
let's make that change.
Reported-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de>
Tested-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de>
Fixes:
1760fdb6fe9f (mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND")
Fixes:
76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220517101046.27512-1-ulf.hansson@linaro.org
Jan Kara [Thu, 19 May 2022 10:52:32 +0000 (12:52 +0200)]
bfq: Remove bfq_requeue_request_body()
The function has only a single caller and two lines. Just remove it
since it is pointless and just harming readability.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220519105235.31397-4-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 19 May 2022 10:52:31 +0000 (12:52 +0200)]
bfq: Remove superfluous conversion from RQ_BIC()
We store struct bfq_io_cq pointer in rq->elv.priv[0] in bfq_init_rq().
Thus a call to icq_to_bic() in RQ_BIC() is wrong. Luckily it does no
harm currently because struct io_iq is the first one in struct
bfq_io_cq.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220519105235.31397-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 19 May 2022 10:52:30 +0000 (12:52 +0200)]
bfq: Allow current waker to defend against a tentative one
The code in bfq_check_waker() ignores wake up events from the current
waker. This makes it more likely we select a new tentative waker
although the current one is generating more wake up events. Treat
current waker the same way as any other process and allow it to reset
the waker detection logic.
Fixes:
71217df39dc6 ("block, bfq: make waker-queue detection more robust")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220519105235.31397-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 19 May 2022 10:52:29 +0000 (12:52 +0200)]
bfq: Relax waker detection for shared queues
Currently we look for waker only if current queue has no requests. This
makes sense for bfq queues with a single process however for shared
queues when there is a larger number of processes the condition that
queue has no requests is difficult to meet because often at least one
process has some request in flight although all the others are waiting
for the waker to do the work and this harms throughput. Relax the "no
queued request for bfq queue" condition to "the current task has no
queued requests yet". For this, we also need to start tracking number of
requests in flight for each task.
This patch (together with the following one) restores the performance
for dbench with 128 clients that regressed with commit
c65e6fd460b4
("bfq: Do not let waker requests skip proper accounting") because
this commit makes requests of wakers properly enter BFQ queues and thus
these queues become ineligible for the old waker detection logic.
Dbench results:
Vanilla 5.18-rc3 5.18-rc3 + revert 5.18-rc3 patched
Mean 1237.36 ( 0.00%) 950.16 * 23.21%* 988.35 * 20.12%*
Numbers are time to complete workload so lower is better.
Fixes:
c65e6fd460b4 ("bfq: Do not let waker requests skip proper accounting")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220519105235.31397-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zhihao Cheng [Tue, 10 May 2022 13:38:05 +0000 (21:38 +0800)]
fs-writeback: writeback_sb_inodes:Recalculate 'wrote' according skipped pages
Commit
505a666ee3fc ("writeback: plug writeback in wb_writeback() and
writeback_inodes_wb()") has us holding a plug during wb_writeback, which
may cause a potential ABBA dead lock:
wb_writeback fat_file_fsync
blk_start_plug(&plug)
for (;;) {
iter i-1: some reqs have been added into plug->mq_list // LOCK A
iter i:
progress = __writeback_inodes_wb(wb, work)
. writeback_sb_inodes // fat's bdev
. __writeback_single_inode
. . generic_writepages
. . __block_write_full_page
. . . . __generic_file_fsync
. . . . sync_inode_metadata
. . . . writeback_single_inode
. . . . __writeback_single_inode
. . . . fat_write_inode
. . . . __fat_write_inode
. . . . sync_dirty_buffer // fat's bdev
. . . . lock_buffer(bh) // LOCK B
. . . . submit_bh
. . . . blk_mq_get_tag // LOCK A
. . . trylock_buffer(bh) // LOCK B
. . . redirty_page_for_writepage
. . . wbc->pages_skipped++
. . --wbc->nr_to_write
. wrote += write_chunk - wbc.nr_to_write // wrote > 0
. requeue_inode
. redirty_tail_locked
if (progress) // progress > 0
continue;
iter i+1:
queue_io
// similar process with iter i, infinite for-loop !
}
blk_finish_plug(&plug) // flush plug won't be called
Above process triggers a hungtask like:
[ 399.044861] INFO: task bb:2607 blocked for more than 30 seconds.
[ 399.046824] Not tainted
5.18.0-rc1-00005-gefae4d9eb6a2-dirty
[ 399.051539] task:bb state:D stack: 0 pid: 2607 ppid:
2426 flags:0x00004000
[ 399.051556] Call Trace:
[ 399.051570] __schedule+0x480/0x1050
[ 399.051592] schedule+0x92/0x1a0
[ 399.051602] io_schedule+0x22/0x50
[ 399.051613] blk_mq_get_tag+0x1d3/0x3c0
[ 399.051640] __blk_mq_alloc_requests+0x21d/0x3f0
[ 399.051657] blk_mq_submit_bio+0x68d/0xca0
[ 399.051674] __submit_bio+0x1b5/0x2d0
[ 399.051708] submit_bio_noacct+0x34e/0x720
[ 399.051718] submit_bio+0x3b/0x150
[ 399.051725] submit_bh_wbc+0x161/0x230
[ 399.051734] __sync_dirty_buffer+0xd1/0x420
[ 399.051744] sync_dirty_buffer+0x17/0x20
[ 399.051750] __fat_write_inode+0x289/0x310
[ 399.051766] fat_write_inode+0x2a/0xa0
[ 399.051783] __writeback_single_inode+0x53c/0x6f0
[ 399.051795] writeback_single_inode+0x145/0x200
[ 399.051803] sync_inode_metadata+0x45/0x70
[ 399.051856] __generic_file_fsync+0xa3/0x150
[ 399.051880] fat_file_fsync+0x1d/0x80
[ 399.051895] vfs_fsync_range+0x40/0xb0
[ 399.051929] __x64_sys_fsync+0x18/0x30
In my test, 'need_resched()' (which is imported by
590dca3a71 "fs-writeback:
unplug before cond_resched in writeback_sb_inodes") in function
'writeback_sb_inodes()' seldom comes true, unless cond_resched() is deleted
from write_cache_pages().
Fix it by correcting wrote number according number of skipped pages
in writeback_sb_inodes().
Goto Link to find a reproducer.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215837
Cc: stable@vger.kernel.org # v4.3
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220510133805.1988292-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Maarten Lankhorst [Wed, 11 May 2022 11:52:19 +0000 (13:52 +0200)]
drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomap
When removing short term pins, I've changed the the batch buffer
pinning for relocation to use __i915_vma_pin, because
i915_gem_object_ggtt_pin_ww was destroying the old vma. This
caused regressions, because the functions are not identical.
Fix the regressions by calling i915_gem_object_ggtt_pin_ww() again
on ggtt-only platforms, but only if the batch can be pinned without
being moved.
Fixes:
b5cfe6f7a6e1 ("drm/i915: Remove short-term pins from execbuf, v6.")
Cc: Matthew Auld <matthew.auld@intel.com>
Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5806
Link: https://patchwork.freedesktop.org/patch/msgid/20220511115219.46507-1-maarten.lankhorst@linux.intel.com
(cherry picked from commit
451374eef622fca6f00eeeda89aaccb45a30a149)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Sunil V L [Thu, 19 May 2022 05:15:12 +0000 (10:45 +0530)]
riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
Add support for getting the boot hart ID from the Linux EFI stub using
RISCV_EFI_BOOT_PROTOCOL. This method is preferred over the existing DT
based approach since it works irrespective of DT or ACPI.
The specification of the protocol is hosted at:
https://github.com/riscv-non-isa/riscv-uefi
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Link: https://lore.kernel.org/r/20220519051512.136724-2-sunilvl@ventanamicro.com
[ardb: minor tweaks for coding style and whitespace]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Andrew Lunn [Wed, 18 May 2022 00:58:40 +0000 (02:58 +0200)]
net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
It is possible to stack bridges on top of each other. Consider the
following which makes use of an Ethernet switch:
br1
/ \
/ \
/ \
br0.11 wlan0
|
br0
/ | \
p1 p2 p3
br0 is offloaded to the switch. Above br0 is a vlan interface, for
vlan 11. This vlan interface is then a slave of br1. br1 also has a
wireless interface as a slave. This setup trunks wireless lan traffic
over the copper network inside a VLAN.
A frame received on p1 which is passed up to the bridge has the
skb->offload_fwd_mark flag set to true, indicating that the switch has
dealt with forwarding the frame out ports p2 and p3 as needed. This
flag instructs the software bridge it does not need to pass the frame
back down again. However, the flag is not getting reset when the frame
is passed upwards. As a result br1 sees the flag, wrongly interprets
it, and fails to forward the frame to wlan0.
When passing a frame upwards, clear the flag. This is the Rx
equivalent of br_switchdev_frame_unmark() in br_dev_xmit().
Fixes:
f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jonathan Lemon [Tue, 17 May 2022 21:46:00 +0000 (14:46 -0700)]
ptp: ocp: change sysfs attr group handling
In the detach path, the driver calls sysfs_remove_group() for the
groups it believes has been registered. However, if the group was
never previously registered, then this causes a splat.
Instead, compute the groups that should be registered in advance,
and then call sysfs_create_groups(), which registers them all at once.
Update the error handling appropriately.
Fixes:
c205d53c4923 ("ptp: ocp: Add firmware capability bits for feature gating")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220517214600.10606-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dave Airlie [Thu, 19 May 2022 04:03:02 +0000 (14:03 +1000)]
Merge tag 'amd-drm-fixes-5.18-2022-05-18' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.18-2022-05-18:
amdgpu:
- Suspend/resume regression fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518202045.9123-1-alexander.deucher@amd.com
Joachim Wiberg [Wed, 18 May 2022 15:16:30 +0000 (17:16 +0200)]
selftests: forwarding: fix missing backslash
Fix missing backslash, introduced in
f62c5acc800ee. Causes all tests to
not be installed.
Fixes:
f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile")
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 19 May 2022 02:34:25 +0000 (19:34 -0700)]
Merge git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Reduce number of hardware offload retries from flowtable datapath
which might hog system with retries, from Felix Fietkau.
2) Skip neighbour lookup for PPPoE device, fill_forward_path() already
provides this and set on destination address from fill_forward_path for
PPPoE device, also from Felix.
4) When combining PPPoE on top of a VLAN device, set info->outdev to the
PPPoE device so software offload works, from Felix.
5) Fix TCP teardown flowtable state, races with conntrack gc might result
in resetting the state to ESTABLISHED and the time to one day. Joint
work with Oz Shlomo and Sven Auhagen.
6) Call dst_check() from flowtable datapath to check if dst is stale
instead of doing it from garbage collector path.
7) Disable register tracking infrastructure, either user-space or
kernel need to pre-fetch keys inconditionally, otherwise register
tracking assumes data is already available in register that might
not well be there, leading to incorrect reductions.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: disable expression reduction infra
netfilter: flowtable: move dst_check to packet path
netfilter: flowtable: fix TCP flow teardown
netfilter: nft_flow_offload: fix offload with pppoe + vlan
net: fix dev_fill_forward_path with pppoe + bridge
netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices
netfilter: flowtable: fix excessive hw offload attempts after failure
====================
Link: https://lore.kernel.org/r/20220518213841.359653-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 19 May 2022 00:32:27 +0000 (14:32 -1000)]
Merge tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just a small fix for a missing fifo time assigment for the head
insertion case in mq-deadline"
* tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-block:
block/mq-deadline: Set the fifo_time member also if inserting at head
Linus Torvalds [Thu, 19 May 2022 00:21:30 +0000 (14:21 -1000)]
Merge tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two small changes fixing issues from the 5.18 merge window:
- Fix wrong ordering of a tracepoint (Dylan)
- Fix MSG_RING on IOPOLL rings (me)"
* tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-block:
io_uring: don't attempt to IOPOLL for MSG_RING requests
io_uring: fix ordering of args in io_uring_queue_async_work
Linus Torvalds [Thu, 19 May 2022 00:19:26 +0000 (14:19 -1000)]
Merge tag 'audit-pr-
20220518' of git://git./linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single audit patch to fix a problem where a task's audit_context was
not being properly reset with io_uring"
* tag 'audit-pr-
20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit,io_uring,io-wq: call __audit_uring_exit for dummy contexts
Linus Torvalds [Thu, 19 May 2022 00:15:35 +0000 (14:15 -1000)]
Merge tag 'selinux-pr-
20220518' of git://git./linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A single SELinux patch to fix an error path that was doing the wrong
thing with respect to freeing memory"
* tag 'selinux-pr-
20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix bad cleanup on error in hashtab_duplicate()
Linus Torvalds [Thu, 19 May 2022 00:07:43 +0000 (14:07 -1000)]
Merge branch 'arm/fixes' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The SoC bug fixes have calmed down sufficiently, there is one minor
update for the MAINTAINERS file, and few bug fixes for dts
descriptions:
- Updates to the BananaPi R2-Pro (rk3568) dts to match production
hardware rather than the prototype version.
- Qualcomm sm8250 soundwire gets disabled on some machines to avoid
crashes
- A number of aspeed SoC specific fixes, addressing incorrect pin
cotrol settings, some values in the romed8hm board, and a revert
for an accidental removal of a DT node"
* 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: omap: remove me as a maintainer
ARM: dts: aspeed: Add video engine to g6
ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name
ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values
ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro
arm64: dts: rockchip: Change io-domains of bpi-r2-pro
Linus Torvalds [Thu, 19 May 2022 00:02:25 +0000 (14:02 -1000)]
Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs
Pull misc fixes from Al Viro:
"vhost race fix and a percpu_ref_init-caused cgroup double-free fix.
The latter had manifested as buggered struct mount refcounting - those
are also using percpu data structures, but anything that does percpu
allocations could be hit"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Fix double fget() in vhost_net_set_backend()
percpu_ref_init(): clean ->percpu_count_ref on failure
Linus Torvalds [Wed, 18 May 2022 23:53:53 +0000 (13:53 -1000)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull mlx5 fix from Michael Tsirkin:
"One last minute fixup
The patch has been on list for a while but as it was posted as part of
a thread it was missed"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Use consistent RQT size
Jens Axboe [Wed, 18 May 2022 22:32:00 +0000 (16:32 -0600)]
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
A previous commit got rid of unnecessary rcu_read_lock() inside the
IRQ disabling queue_lock, but this debug statement was left. It's now
firing since we are indeed not inside a RCU read lock, but we don't
need to be as we're still preempt safe.
Get rid of the check, as we have a lockdep assert for holding the
queue lock right after it anyway.
Link: https://lore.kernel.org/linux-block/46253c48-81cb-0787-20ad-9133afdd9e21@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes:
77c570a1ea85 ("blk-cgroup: Remove unnecessary rcu_read_lock/unlock()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 18 May 2022 21:34:37 +0000 (15:34 -0600)]
io_uring: disallow mixed provided buffer group registrations
It's nonsensical to register a provided buffer ring, if a classic
provided buffer group with the same ID exists. Depending on the order of
which we decide what type to pick, the other type will never get used.
Explicitly disallow it and return an error if this is attempted.
Fixes:
c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>