OSDN Git Service
Pavel Machek [Tue, 16 Apr 2019 07:58:45 +0000 (09:58 +0200)]
mmc: core: Fix warning and undefined behavior in mmc voltage handling
!voltage_ranges is tested for too late, allowing warning and undefined
behavior. Fix that.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Yoshihiro Shimoda [Tue, 9 Apr 2019 11:05:06 +0000 (20:05 +0900)]
mmc: core: retry CMD1 in mmc_send_op_cond() even if the ocr = 0
According to eMMC specification v5.1 section 6.4.3, we should issue
CMD1 repeatedly in the idle state until the eMMC is ready even if
the mmc_attach_mmc() calls this function with ocr = 0. Otherwise
some eMMC devices seems to enter the inactive mode after
mmc_init_card() issued CMD0 when the eMMC device is busy.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Sowjanya Komatineni [Thu, 11 Apr 2019 19:18:19 +0000 (12:18 -0700)]
mmc: tegra: add sdhci tegra suspend and resume
This patch adds suspend and resume PM ops for tegra SDHCI.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Adrian Hunter [Fri, 5 Apr 2019 12:40:20 +0000 (15:40 +0300)]
mmc: sdhci: Remove finish_tasklet
Remove finish_tasklet. Requests that require DMA-unmapping or sdhci_reset
are completed either in the IRQ thread or a workqueue if the completion is
not initiated by the IRQ.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Adrian Hunter [Fri, 5 Apr 2019 12:40:19 +0000 (15:40 +0300)]
mmc: sdhci: Call mmc_request_done() from IRQ handler if possible
In preparation for removing finish_tasklet, call mmc_request_done() from
the IRQ handler if possible. That will alleviate the potential loss of
performance from shifting away from finish_tasklet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Adrian Hunter [Fri, 5 Apr 2019 12:40:18 +0000 (15:40 +0300)]
mmc: sdhci: Move some processing to __sdhci_finish_mrq()
In preparation for removing finish_tasklet, move some processing from
sdhci_request_done() to __sdhci_finish_mrq().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Adrian Hunter [Fri, 5 Apr 2019 12:40:17 +0000 (15:40 +0300)]
mmc: sdhci: Move timer and has_requests functions
In preparation for removing finish_tasklet, move some functions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Adrian Hunter [Fri, 5 Apr 2019 12:40:16 +0000 (15:40 +0300)]
mmc: sdhci: Reorganize sdhci_finish_mrq() and __sdhci_finish_mrq()
In preparation for removing finish_tasklet, reorganize sdhci_finish_mrq()
and __sdhci_finish_mrq() to separate the tasklet scheduling from other
processing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
YueHaibing [Thu, 11 Apr 2019 02:59:04 +0000 (02:59 +0000)]
memstick: jmb38x_ms: remove set but not used variable 'data'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/memstick/host/jmb38x_ms.c: In function 'jmb38x_ms_issue_cmd':
drivers/memstick/host/jmb38x_ms.c:371:17: warning:
variable 'data' set but not used [-Wunused-but-set-variable]
It's never used since introduction and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Mon, 25 Mar 2019 12:24:42 +0000 (13:24 +0100)]
MAINTAINERS: Add section for MediaTek MMC/SD/SDIO driver
Cc: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Chaotian Jing <chaotian.jing@mediatek.com>
Adrian Hunter [Mon, 8 Apr 2019 08:32:11 +0000 (11:32 +0300)]
mmc: sdhci-pci: Add support for Intel CML
Add PCI Ids for Intel CML.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Andrea Merello [Fri, 5 Apr 2019 08:34:58 +0000 (10:34 +0200)]
mmc: core: make pwrseq_emmc (partially) support sleepy GPIO controllers
pwrseq_emmc.c implements a HW reset procedure for eMMC chip by driving a
GPIO line.
It registers the .reset() cb on mmc_pwrseq_ops and it registers a system
restart notification handler; both of them perform reset by unconditionally
calling gpiod_set_value().
If the eMMC reset line is tied to a GPIO controller whose driver can sleep
(i.e. I2C GPIO controller), then the kernel would spit warnings when trying
to reset the eMMC chip by means of .reset() mmc_pwrseq_ops cb (that is
exactly what I'm seeing during boot).
Furthermore, on system reset we would gets to the system restart
notification handler with disabled interrupts - local_irq_disable() is
called in machine_restart() at least on ARM/ARM64 - and we would be in
trouble when the GPIO driver tries to sleep (which indeed doesn't happen
here, likely because in my case the machine specific code doesn't call
do_kernel_restart(), I guess..).
This patch fixes the .reset() cb to make use of gpiod_set_value_cansleep(),
so that the eMMC gets reset on boot without complaints, while, since there
isn't that much we can do, we avoid register the restart handler if the
GPIO controller has a sleepy driver (and we spit a dev_notice() message to
let people know)..
This had been tested on a downstream 4.9 kernel with backported
commit
83f37ee7ba33 ("mmc: pwrseq: Add reset callback to the struct
mmc_pwrseq_ops") and commit
ae60fb031cf2 ("mmc: core: Don't do eMMC HW
reset when resuming the eMMC card"), because I couldn't boot my board
otherwise. Maybe worth to RFT.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Fabien Parent [Wed, 3 Apr 2019 19:30:50 +0000 (21:30 +0200)]
mmc: mtk-sd: check for valid optional memory resource
'top_base' memory region is optional. Check that the resource is valid
before using it. This avoid getting a "invalid resource" error message
printed by the kernel.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Daniel Drake [Mon, 1 Apr 2019 05:42:15 +0000 (13:42 +0800)]
mmc: alcor: enable DMA transfer of large buffers
DMA on this hardware is limited to dealing with a single page at a
time. Previously, the driver was set up accordingly to request single-page
DMA buffers, however that had the effect of generating a large number
of small MMC requests for data I/O.
Improve the driver to accept scatter-gather DMA buffers of larger sizes.
Iterate through those buffers a page at a time.
Testing with dd, this increases write performance from 2mb/sec to
10mb/sec, and increases read performance from 4mb/sec to 14mb/sec.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Faiz Abbas [Mon, 1 Apr 2019 12:58:04 +0000 (18:28 +0530)]
mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes
According to the AM654x Data Manual[1], the setup timing in lower speed
modes can only be met if the controller uses a falling edge data launch.
To ensure this, the HIGH_SPEED_ENA (HOST_CONTROL[2]) bit should be
cleared in default speed, SD high speed, MMC high speed, SDR12 and SDR25
speed modes.
Use the sdhci writeb callback to implement this condition.
[1] http://www.ti.com/lit/gpn/am6546 Section 5.10.5.16.1
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Fri, 22 Mar 2019 11:43:45 +0000 (12:43 +0100)]
MAINTAINERS: Add Ulf Hansson to the MEMORYSTICK section
The amount of changes to the memorystick subsystem are limited as of today.
However, I have a couple of times been funneling changes through my MMC
tree and it have turned out fine. So, I am here by volunteering to continue
doing this, by adding myself and the link to the MMC tree to the MEMSTICK
section.
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Alex Dubov <alex.dubov@gmail.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Rui Feng <rui_feng@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Maxim Levitsky <maximlevitsky@gmail.com>
Ulf Hansson [Fri, 22 Mar 2019 11:43:34 +0000 (12:43 +0100)]
MAINTAINERS: Collect TI FLASH MEDIA drivers into one section
The current SONY MEMORYSTICK CARD SUPPORT section is pointing to the TI
flash media memorystick driver, which is a bit confusing. Let's make this
more clear by moving this part into TI FLASH MEDIA INTERFACE DRIVER
section, but rename the section to TI FLASH MEDIA MEMORYSTICK/MMC DRIVERS,
as to make it more clear.
Finally, add Alex Dubov to the SONY MEMORYSTICK STANDARD SUPPORT, as I
believe that has been the intention.
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Alex Dubov <alex.dubov@gmail.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Andy Shevchenko [Wed, 27 Mar 2019 18:01:10 +0000 (20:01 +0200)]
mmc: mmc_spi: Convert to use SPDX identifier
Reduce size of duplicated comments by switching to use SPDX identifier.
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Andy Shevchenko [Wed, 27 Mar 2019 18:01:09 +0000 (20:01 +0200)]
mmc: mmc_spi: Indentation fixes
- spaces surrounding arithmetic operators
- utilize full line limit
- drop extra spaces / TABs in variable definitions
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Andy Shevchenko [Wed, 27 Mar 2019 18:01:08 +0000 (20:01 +0200)]
mmc: mmc_spi: Join string literals back
For easy grepping on debug purposes join string literals back in
the messages.
No functional change.
While here, join list of module authors as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Andy Shevchenko [Wed, 27 Mar 2019 18:01:07 +0000 (20:01 +0200)]
mmc: mmc_spi: Remove useless NULL check at ->remove()
The mmc pointer can't be NULL at ->remove(), drop the useless check.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Andy Shevchenko [Wed, 27 Mar 2019 18:01:06 +0000 (20:01 +0200)]
mmc: mmc_spi: Remove redundant dev_set_drvdata()
Driver core sets it to NULL upon probe failure or release.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ludovic Barre [Wed, 27 Mar 2019 09:05:32 +0000 (10:05 +0100)]
mmc: mmci: replace blksz_datactrlXX by get_datactrl_cfg callback
This patch allows to get datactrl configuration specific
at variant. This introduce more flexibility on datactlr
value.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ludovic Barre [Wed, 27 Mar 2019 09:05:31 +0000 (10:05 +0100)]
mmc: mmci: stm32: define get_dctrl_cfg
This patch defines get_dctrl_cfg callback for sdmmc variant.
sdmmc variant has specific stm32 transfer modes.
sdmmc data transfer mode selection could be:
-Block data transfer ending on block count.
-SDIO multibyte data transfer.
-MMC Stream data transfer (not used).
-Block data transfer ending with STOP_TRANSMISSION command.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ludovic Barre [Wed, 27 Mar 2019 09:05:30 +0000 (10:05 +0100)]
mmc: mmci: qcom: define get_dctrl_cfg
This patch defines get_dctrl_cfg callback for qcom variant.
qcom variant has a specific block size definition.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ludovic Barre [Wed, 27 Mar 2019 09:05:29 +0000 (10:05 +0100)]
mmc: mmci: define get_dctrl_cfg for legacy variant
This patch defines get_dctrl_cfg callback for legacy variants
whatever DMA_ENGINE configuration.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
[Ulf: Fixed a build error]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ludovic Barre [Wed, 27 Mar 2019 09:05:28 +0000 (10:05 +0100)]
mmc: mmci: add get_datactrl_cfg callback and helper functions
This patch adds get_datactrl_cfg callback in mmci_host_ops
to allow to get datactrl configuration specific at variant.
Common helper function is defined and could be call by variant.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Daniel Drake [Tue, 26 Mar 2019 07:04:15 +0000 (15:04 +0800)]
mmc: alcor: enable DMA for writes
Enable the DMA codepath for writes as well as reads.
This improves write speed from 1mb/sec to 2mb/sec (tested with dd).
The original ampe_stor vendor driver also uses DMA for writes.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Christoph Muellner [Fri, 22 Mar 2019 11:38:05 +0000 (12:38 +0100)]
mmc: sdhci-of-arasan: Add DTS property to disable DCMDs.
Direct commands (DCMDs) are an optional feature of eMMC 5.1's command
queue engine (CQE). The Arasan eMMC 5.1 controller uses the CQHCI,
which exposes a control register bit to enable the feature.
The current implementation sets this bit unconditionally.
This patch allows to suppress the feature activation,
by specifying the property disable-cqe-dcmd.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes:
84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Christoph Muellner [Fri, 22 Mar 2019 11:38:04 +0000 (12:38 +0100)]
dt-bindings: mmc: Add disable-cqe-dcmd property.
Add disable-cqe-dcmd as optional property for MMC hosts.
This property allows to disable or not enable the direct command
features of the command queue engine.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Fixes:
84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
YueHaibing [Fri, 22 Mar 2019 14:11:38 +0000 (22:11 +0800)]
mmc: sdhci-omap: Make sdhci_omap_reset static
Fix sparse warning:
drivers/mmc/host/sdhci-omap.c:788:6: warning:
symbol 'sdhci_omap_reset' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Sowjanya Komatineni [Sun, 24 Mar 2019 04:45:26 +0000 (21:45 -0700)]
mmc: tegra: fix CQE enable and resume sequence
Tegra CQHCI/SDHCI design prevents write access to SDHCI block size
register when CQE is enabled and unhalted.
CQHCI driver enables CQE prior to invoking sdhci_cqe_enable which
violates this Tegra specific host requirement.
This patch fixes this by configuring sdhci block registers prior
to CQE unhalt.
This patch also has a fix for retry of unhalt due to known Tegra
specific CQE resume bug where first unhalt might not succeed when
clear all tasks is performed prior to resume and need a second unhalt.
This patch also includes CQE enable fix for CMD CRC errors that
happen with the specific sandisk emmc device when status command
is sent during the transfer of last data block due to marginal timing.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Sowjanya Komatineni [Sun, 24 Mar 2019 04:45:25 +0000 (21:45 -0700)]
mmc: cqhci: add CQHCI_SSC1 register CBC field mask
This patch adds define for CBC field mask of the register
CQHCI_SSC1.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Sowjanya Komatineni [Sun, 24 Mar 2019 04:45:24 +0000 (21:45 -0700)]
mmc: tegra: add Tegra186 WAR for CQE
Tegra186 CQHCI host has a known bug where CQHCI controller selects
DATA_PRESENT_SELECT bit to 1 for DCMDs with R1B response type and
since DCMD does not trigger any data transfer, DCMD task complete
happens leaving the DATA FSM of host controller in wait state for
the data.
This effects the data transfer tasks issued after the DCMDs with
R1b response type resulting in timeout.
SW WAR is to set CMD_TIMING to 1 in DCMD task descriptor. This bug
and SW WAR is applicable only for Tegra186 and not for Tegra194.
This patch implements this WAR thru NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING
for Tegra186 and also implements update_dcmd_desc of cqhci_host_ops
interface to set CMD_TIMING bit depending on the NVQUIRK.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Sowjanya Komatineni [Sun, 24 Mar 2019 04:45:23 +0000 (21:45 -0700)]
mmc: cqhci: allow hosts to update dcmd cmd desc
This patch adds update_dcmd_desc interface to cqhci_host_ops to
allow hosts to update any of the DCMD task descriptor attributes
and parameters.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Sowjanya Komatineni [Sun, 24 Mar 2019 04:45:21 +0000 (21:45 -0700)]
dt-bindings: mmc: tegra: document Tegra194 compatible string
SDHCI controller of Tegra194 is similar to SDHCI controller in Tegra186.
This patch documents Tegra194 sdhci compatible string.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Sowjanya Komatineni [Sun, 24 Mar 2019 04:45:20 +0000 (21:45 -0700)]
mmc: tegra: update hw tuning process
This patch includes below HW tuning related fixes.
configures tuning parameters as per Tegra TRM
WAR fix for manual tap change
HW auto-tuning post process
As per Tegra TRM, SDR50 mode tuning execution takes upto maximum
of 256 tuning iterations and SDR104/HS200/HS400 modes tuning
execution takes upto maximum of 128 tuning iterations.
This patch programs tuning control register with maximum tuning
iterations needed based on the timing along with the start tap,
multiplier, and step size used by the HW tuning.
Tegra210 has a known issue of glitch on trimmer output when the
tap value is changed with the trimmer input clock running and the
WAR is to disable card clock before sending tuning command and
after sending tuning command wait for 1usec and issue SW reset
followed by enabling card clock.
This WAR is applicable when changing tap value manually as well.
Tegra SDHCI driver has this implemented correctly for manual tap
change but missing SW reset before enabling card clock during
sending tuning command.
Issuing SW reset during tuning command as a part of WAR and is
applicable in cases where tuning is performed with single step size
for more iterations. This patch includes this fix.
HW auto-tuning finds the best largest passing window and sets the
tap at the middle of the window. With some devices like sandisk
eMMC driving fast edges and due to high tap to tap delay in the
Tegra chipset, auto-tuning does not detect falling tap between the
valid windows resulting in a parital window or a merged window and
the best tap is set at the signal transition which is actually the
worst tap location.
Recommended SW solution is to detect if the best passing window
picked by the HW tuning is a partial or a merged window based on
min and max tap delays found from chip characterization across
PVT and perform tuning correction to pick the best tap.
This patch has implementation of this post HW tuning process for
the tegra hosts that support HW tuning through the callback function
tegra_sdhci_execute_hw_tuning and uses the tuned tap delay.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Sowjanya Komatineni [Sun, 24 Mar 2019 04:45:19 +0000 (21:45 -0700)]
mmc: sdhci: allow host to specify maximum tuning loops
As per the Host Controller Standard Specification Version 4.20,
limitation of tuning iteration count is removed as PLL locking
time can be longer than UHS-1 tuning due to larger PVT fluctuation
and it will result in increase of tuning iteration to complete the
tuning.
This patch creates sdhci_host member tuning_loop_count to allow
hosts to specify maximum tuning iterations and also updates
execute_tuning to use this specified maximum tuning iteration count.
Default tuning_loop_count is set to same as existing loop count of
MAX_TUNING_LOOP which is 40 iterations.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Sowjanya Komatineni [Sun, 24 Mar 2019 04:45:18 +0000 (21:45 -0700)]
mmc: tegra: fix ddr signaling for non-ddr modes
ddr_signaling is set to true for DDR50 and DDR52 modes but is
not set back to false for other modes. This programs incorrect
host clock when mode change happens from DDR52/DDR50 to other
SDR or HS modes like incase of mmc_retune where it switches
from HS400 to HS DDR and then from HS DDR to HS mode and then
to HS200.
This patch fixes the ddr_signaling to set properly for non DDR
modes.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: stable@vger.kernel.org # v4.20 +
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Fabien Parent [Sat, 23 Mar 2019 21:15:58 +0000 (22:15 +0100)]
mmc: mtk-sd: add support for MT8516
Add the MSDC configuration for the MT8516 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Wolfram Sang [Tue, 19 Mar 2019 10:34:17 +0000 (11:34 +0100)]
mmc: renesas_sdhi: set CBSY flag before probing TMIO host
The CBSY flag should be proper before calling tmio_mmc_host_probe()
because this function will already use write16 which checks this bit.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Wolfram Sang [Thu, 14 Mar 2019 22:31:30 +0000 (23:31 +0100)]
mmc: renesas_sdhi: prevent overflow for max_req_size
max_req_size is calculated by 'max_blk_size * max_blk_count' in the TMIO
core. So, specifying U32_MAX as max_blk_count will overflow this
calculation. It will cause no harm in practice because the immense high
number will overflow into another immense high number. However, it is
not good coding practice, so calculate max_blk_count so that
max_req_size will fit into unsigned int on ARM32/64.
Thanks to the Renesas BSP team for the bug report!
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Wolfram Sang [Thu, 14 Mar 2019 22:31:29 +0000 (23:31 +0100)]
mmc: tmio: introduce macro for max block size
We will need it later for other calculations.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Wolfram Sang [Thu, 14 Mar 2019 22:54:41 +0000 (23:54 +0100)]
mmc: renesas_sdhi: update copyright information
Mostly year updates, but one addition as well.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stefan Wahren [Thu, 14 Mar 2019 16:18:22 +0000 (17:18 +0100)]
mmc: mxs-mmc: Enable MMC_CAP_ERASE
According to the i.MX23/28 reference manuals both mmc interfaces support
the MMC_ERASE command. So enable this capability in the driver to allow
erase/discard/trim requests.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Kangjie Lu [Mon, 11 Mar 2019 05:53:33 +0000 (00:53 -0500)]
mmc_spi: add a status check for spi_sync_locked
In case spi_sync_locked fails, the fix reports the error and
returns the error code upstream.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Yangbo Lu [Mon, 11 Mar 2019 02:16:51 +0000 (02:16 +0000)]
mmc: sdhci-of-esdhc: add quirk to ignore command inhibit for data
For some controllers, in Present State Register, Data Line
Active bit is not reliable for commands (such as CMD6, CMD7,
CMD12, CMD28, CMD29, or CMD38) with busy signal. DLA affects
Command with Data Inhibit bit. Therefore, software driver
may not know the busy status in DLA/CDIHB.
Futunately MMC core driver has already polled card status
with CMD13 after sending any command with busy signal. So
we can just ignore CDIHB never released issue for such
controllers. This patch is to add a quirk to handle this.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Yinbo Zhu [Mon, 11 Mar 2019 02:16:47 +0000 (02:16 +0000)]
mmc: sdhci-of-esdhc: add erratum eSDHC7 support
Invalid Transfer Complete (IRQSTAT[TC]) bit could be set during
multi-write operation even when the BLK_CNT in BLKATTR register
has not reached zero. Therefore, Transfer Complete might be
reported twice due to this erratum since a valid Transfer Complete
occurs when BLK_CNT reaches zero. This erratum is to fix this issue
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Yinbo Zhu [Mon, 11 Mar 2019 02:16:44 +0000 (02:16 +0000)]
mmc: sdhci-of-esdhc: add erratum A-009204 support
In the event of that any data error (like, IRQSTAT[DCE]) occurs
during an eSDHC data transaction where DMA is used for data
transfer to/from the system memory, setting the SYSCTL[RSTD]
register may cause a system hang. If software sets the register
SYSCTL[RSTD] to 1 for error recovery while DMA transferring is
not complete, eSDHC may hang the system bus. This happens because
the software register SYSCTL[RSTD] resets the DMA engine without
waiting for the completion of pending system transactions. This
erratum is to fix this issue.
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Yinbo Zhu [Mon, 11 Mar 2019 02:16:40 +0000 (02:16 +0000)]
mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support
eSDHC-A001: The data timeout counter (SYSCTL[DTOCV]) is not
reliable for DTOCV values 0x4(2^17 SD clock), 0x8(2^21 SD clock),
and 0xC(2^25 SD clock). The data timeout counter can count from
2^13–2^27, but for values 2^17, 2^21, and 2^25, the timeout
counter counts for only 2^13 SD clocks.
A-008358: The data timeout counter value loaded into the timeout
counter is less than expected and can result into early timeout
error in case of eSDHC data transactions. The table below shows
the expected vs actual timeout period for different values of
SYSCTL[DTOCV]:
these two erratum has the same quirk to control it, and set
SDHCI_QUIRK_RESET_AFTER_REQUEST to fix above issue.
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Yinbo Zhu [Mon, 11 Mar 2019 02:16:36 +0000 (02:16 +0000)]
mmc: sdhci-of-esdhc: add erratum eSDHC5 support
Software writing to the Transfer Type configuration register
(system clock domain) can cause a setup/hold violation in the
CRC flops (card clock domain), which can cause write accesses
to be sent with corrupt CRC values. This issue occurs only for
write preceded by read. this erratum is to fix this issue.
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Yinbo Zhu [Thu, 7 Mar 2019 02:32:44 +0000 (02:32 +0000)]
mmc: sdhci-of-esdhc: add erratum
A011334 support in lx2160 2.0 SoC
This patch is to add erratum
A011334 support in lx2160 2.0 SoC
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Enrico Weigelt, metux IT consult [Wed, 6 Mar 2019 18:27:51 +0000 (19:27 +0100)]
mmc: host: Pedantic cleanups to Kconfig
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Wed, 6 Mar 2019 14:04:56 +0000 (15:04 +0100)]
mmc: mmci: Make mmci_variant_init() static
As mmci_variant_init() is a local function to mmci.c, let's convert it into
static.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Ulf Hansson [Wed, 6 Mar 2019 14:04:55 +0000 (15:04 +0100)]
mmc: mmci: Share sdmmc_variant_init() via the common header file
It's good practice to share functions via header files, rather than from
the c-files. Therefore, let's move sdmmc_variant_init() to mmci.h.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Ludovic Barre <ludovic.barre@st.com>
Tested-by: Ludovic Barre <ludovic.barre@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Ulf Hansson [Wed, 6 Mar 2019 14:04:54 +0000 (15:04 +0100)]
mmc: mmci: Drop qcom specific header file
It seems a bit silly to have a header file to share only the
qcom_variant_init() function. So, let's just drop it and move the
declaration of the function into the common mmci.h instead.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Ulf Hansson [Wed, 6 Mar 2019 14:04:53 +0000 (15:04 +0100)]
mmc: mmci: Re-work code starting DMA for the qcom variant
Having mmci_dmae_start() to invoke the shared function, dml_start_xfer(),
explicitly for the qcom variant isn't very nice. Let's clean up this code
by moving the qcom specific parts into the qcom ->dma_start() callback and
then drop dml_start_xfer() altogether.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Ulf Hansson [Wed, 6 Mar 2019 14:04:52 +0000 (15:04 +0100)]
mmc: mmci: Drop unnecessary clear of variant->qcom_dml flag
There's no point clearing the variant flag in case the qcom variant fails
to setup DMA. This is because if mmci_dma_setup() fails, then the use_dma
flag remains set to false, which leads to mmci using PIO mode and not DMA.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Ulf Hansson [Wed, 6 Mar 2019 14:04:51 +0000 (15:04 +0100)]
mmc: mmci: Don't share un-implemented DMA functions
Some of the DMA functions are shared via mmci.h, however they are not
implemented unless CONFIG_DMA_ENGINE is set. Therefore, add that constraint
to the header file as well.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Linus Torvalds [Sun, 14 Apr 2019 22:17:41 +0000 (15:17 -0700)]
Linux 5.1-rc5
Linus Torvalds [Sun, 14 Apr 2019 22:09:40 +0000 (15:09 -0700)]
Merge branch 'page-refs' (page ref overflow)
Merge page ref overflow branch.
Jann Horn reported that he can overflow the page ref count with
sufficient memory (and a filesystem that is intentionally extremely
slow).
Admittedly it's not exactly easy. To have more than four billion
references to a page requires a minimum of 32GB of kernel memory just
for the pointers to the pages, much less any metadata to keep track of
those pointers. Jann needed a total of 140GB of memory and a specially
crafted filesystem that leaves all reads pending (in order to not ever
free the page references and just keep adding more).
Still, we have a fairly straightforward way to limit the two obvious
user-controllable sources of page references: direct-IO like page
references gotten through get_user_pages(), and the splice pipe page
duplication. So let's just do that.
* branch page-refs:
fs: prevent page refcount overflow in pipe_buf_get
mm: prevent get_user_pages() from overflowing page refcount
mm: add 'try_get_page()' helper function
mm: make page ref count overflow check tighter and more explicit
Matthew Wilcox [Fri, 5 Apr 2019 21:02:10 +0000 (14:02 -0700)]
fs: prevent page refcount overflow in pipe_buf_get
Change pipe_buf_get() to return a bool indicating whether it succeeded
in raising the refcount of the page (if the thing in the pipe is a page).
This removes another mechanism for overflowing the page refcount. All
callers converted to handle a failure.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 11 Apr 2019 17:49:19 +0000 (10:49 -0700)]
mm: prevent get_user_pages() from overflowing page refcount
If the page refcount wraps around past zero, it will be freed while
there are still four billion references to it. One of the possible
avenues for an attacker to try to make this happen is by doing direct IO
on a page multiple times. This patch makes get_user_pages() refuse to
take a new page reference if there are already more than two billion
references to the page.
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 11 Apr 2019 17:14:59 +0000 (10:14 -0700)]
mm: add 'try_get_page()' helper function
This is the same as the traditional 'get_page()' function, but instead
of unconditionally incrementing the reference count of the page, it only
does so if the count was "safe". It returns whether the reference count
was incremented (and is marked __must_check, since the caller obviously
has to be aware of it).
Also like 'get_page()', you can't use this function unless you already
had a reference to the page. The intent is that you can use this
exactly like get_page(), but in situations where you want to limit the
maximum reference count.
The code currently does an unconditional WARN_ON_ONCE() if we ever hit
the reference count issues (either zero or negative), as a notification
that the conditional non-increment actually happened.
NOTE! The count access for the "safety" check is inherently racy, but
that doesn't matter since the buffer we use is basically half the range
of the reference count (ie we look at the sign of the count).
Acked-by: Matthew Wilcox <willy@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 11 Apr 2019 17:06:20 +0000 (10:06 -0700)]
mm: make page ref count overflow check tighter and more explicit
We have a VM_BUG_ON() to check that the page reference count doesn't
underflow (or get close to overflow) by checking the sign of the count.
That's all fine, but we actually want to allow people to use a "get page
ref unless it's already very high" helper function, and we want that one
to use the sign of the page ref (without triggering this VM_BUG_ON).
Change the VM_BUG_ON to only check for small underflows (or _very_ close
to overflowing), and ignore overflows which have strayed into negative
territory.
Acked-by: Matthew Wilcox <willy@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Apr 2019 23:23:16 +0000 (16:23 -0700)]
Merge tag 'for-linus-
20190412' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Set of fixes that should go into this round. This pull is larger than
I'd like at this time, but there's really no specific reason for that.
Some are fixes for issues that went into this merge window, others are
not. Anyway, this contains:
- Hardware queue limiting for virtio-blk/scsi (Dongli)
- Multi-page bvec fixes for lightnvm pblk
- Multi-bio dio error fix (Jason)
- Remove the cache hint from the io_uring tool side, since we didn't
move forward with that (me)
- Make io_uring SETUP_SQPOLL root restricted (me)
- Fix leak of page in error handling for pc requests (Jérôme)
- Fix BFQ regression introduced in this merge window (Paolo)
- Fix break logic for bio segment iteration (Ming)
- Fix NVMe cancel request error handling (Ming)
- NVMe pull request with two fixes (Christoph):
- fix the initial CSN for nvme-fc (James)
- handle log page offsets properly in the target (Keith)"
* tag 'for-linus-
20190412' of git://git.kernel.dk/linux-block:
block: fix the return errno for direct IO
nvmet: fix discover log page when offsets are used
nvme-fc: correct csn initialization and increments on error
block: do not leak memory in bio_copy_user_iov()
lightnvm: pblk: fix crash in pblk_end_partial_read due to multipage bvecs
nvme: cancel request synchronously
blk-mq: introduce blk_mq_complete_request_sync()
scsi: virtio_scsi: limit number of hw queues by nr_cpu_ids
virtio-blk: limit number of hw queues by nr_cpu_ids
block, bfq: fix use after free in bfq_bfqq_expire
io_uring: restrict IORING_SETUP_SQPOLL to root
tools/io_uring: remove IOCQE_FLAG_CACHEHIT
block: don't use for-inside-for in bio_for_each_segment_all
Linus Torvalds [Sat, 13 Apr 2019 21:47:06 +0000 (14:47 -0700)]
Merge tag 'nfs-for-5.1-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fix:
- Fix a deadlock in close() due to incorrect draining of RDMA queues
Bugfixes:
- Revert "SUNRPC: Micro-optimise when the task is known not to be
sleeping" as it is causing stack overflows
- Fix a regression where NFSv4 getacl and fs_locations stopped
working
- Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.
- Fix xfstests failures due to incorrect copy_file_range() return
values"
* tag 'nfs-for-5.1-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
Revert "SUNRPC: Micro-optimise when the task is known not to be sleeping"
NFSv4.1 fix incorrect return value in copy_file_range
xprtrdma: Fix helper that drains the transport
NFS: Fix handling of reply page vector
NFS: Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.
Linus Torvalds [Sat, 13 Apr 2019 21:37:49 +0000 (14:37 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One obvious fix for a ciostor data corruption on error bug"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: csiostor: fix missing data copy in csio_scsi_err_handler()
Linus Torvalds [Sat, 13 Apr 2019 21:33:56 +0000 (14:33 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here's more than a handful of clk driver fixes for changes that came
in during the merge window:
- Fix the AT91 sama5d2 programmable clk prescaler formula
- A bunch of Amlogic meson clk driver fixes for the VPU clks
- A DMI quirk for Intel's Bay Trail SoC's driver to properly mark pmc
clks as critical only when really needed
- Stop overwriting CLK_SET_RATE_PARENT flag in mediatek's clk gate
implementation
- Use the right structure to test for a frequency table in i.MX's
PLL_1416x driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: imx: Fix PLL_1416X not rounding rates
clk: mediatek: fix clk-gate flag setting
platform/x86: pmc_atom: Drop __initconst on dmi table
clk: x86: Add system specific quirk to mark clocks as critical
clk: meson: vid-pll-div: remove warning and return 0 on invalid config
clk: meson: pll: fix rounding and setting a rate that matches precisely
clk: meson-g12a: fix VPU clock parents
clk: meson: g12a: fix VPU clock muxes mask
clk: meson-gxbb: round the vdec dividers to closest
clk: at91: fix programmable clock for sama5d2
Linus Torvalds [Sat, 13 Apr 2019 21:29:21 +0000 (14:29 -0700)]
Merge tag 'pci-v5.1-fixes-2' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Add a DMA alias quirk for another Marvell SATA device (Andre
Przywara)
- Fix a pciehp regression that broke safe removal of devices (Sergey
Miroshnichenko)
* tag 'pci-v5.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: pciehp: Ignore Link State Changes after powering off a slot
PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controller
Linus Torvalds [Sat, 13 Apr 2019 16:03:09 +0000 (09:03 -0700)]
Merge tag 'powerpc-5.1-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A minor build fix for 64-bit FLATMEM configs.
A fix for a boot failure on 32-bit powermacs.
My commit to fix CLOCK_MONOTONIC across Y2038 broke the 32-bit VDSO on
64-bit kernels, ie. compat mode, which is only used on big endian.
The rewrite of the SLB code we merged in 4.20 missed the fact that the
0x380 exception is also used with the Radix MMU to report out of range
accesses. This could lead to an oops if userspace tried to read from
addresses outside the user or kernel range.
Thanks to: Aneesh Kumar K.V, Christophe Leroy, Larry Finger, Nicholas
Piggin"
* tag 'powerpc-5.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Define MAX_PHYSMEM_BITS for all 64-bit configs
powerpc/64s/radix: Fix radix segment exception handling
powerpc/vdso32: fix CLOCK_MONOTONIC on PPC64
powerpc/32: Fix early boot failure with RTAS built-in
Linus Torvalds [Sat, 13 Apr 2019 15:57:00 +0000 (08:57 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main thing is a fix to our FUTEX_WAKE_OP implementation which was
unbelievably broken, but did actually work for the one scenario that
GLIBC used to use.
Summary:
- Fix stack unwinding so we ignore user stacks
- Fix ftrace module PLT trampoline initialisation checks
- Fix terminally broken implementation of FUTEX_WAKE_OP atomics"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value
arm64: backtrace: Don't bother trying to unwind the userspace stack
arm64/ftrace: fix inadvertent BUG() in trampoline check
Linus Torvalds [Sat, 13 Apr 2019 03:54:40 +0000 (20:54 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix typos in user-visible resctrl parameters, and also fix assembly
constraint bugs that might result in miscompilation"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Use stricter assembly constraints in bitops
x86/resctrl: Fix typos in the mba_sc mount option
Linus Torvalds [Sat, 13 Apr 2019 03:52:28 +0000 (20:52 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix the alarm_timer_remaining() return value"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Return correct remaining time
Linus Torvalds [Sat, 13 Apr 2019 03:50:43 +0000 (20:50 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a NULL pointer dereference crash in certain environments"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Do not re-read ->h_load_next during hierarchical load calculation
Linus Torvalds [Sat, 13 Apr 2019 03:42:30 +0000 (20:42 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Six kernel side fixes: three related to NMI handling on AMD systems, a
race fix, a kexec initialization fix and a PEBS sampling fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix perf_event_disable_inatomic() race
x86/perf/amd: Remove need to check "running" bit in NMI handler
x86/perf/amd: Resolve NMI latency issues for active PMCs
x86/perf/amd: Resolve race condition when disabling PMC
perf/x86/intel: Initialize TFA MSR
perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS
Linus Torvalds [Sat, 13 Apr 2019 03:31:08 +0000 (20:31 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fixes a crash when accessing /proc/lockdep"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Zap lock classes even with lock debugging disabled
Linus Torvalds [Sat, 13 Apr 2019 03:21:59 +0000 (20:21 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two genirq fixes, plus an irqchip driver error handling fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent()
genirq: Initialize request_mutex if CONFIG_SPARSE_IRQ=n
irqchip/irq-ls1x: Missing error code in ls1x_intc_of_init()
Linus Torvalds [Sat, 13 Apr 2019 03:13:13 +0000 (20:13 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core fixes from Ingo Molnar:
"Fix an objtool warning plus fix a u64_to_user_ptr() macro expansion
bug"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add rewind_stack_do_exit() to the noreturn list
linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()
Leonard Crestez [Fri, 12 Apr 2019 14:10:03 +0000 (14:10 +0000)]
clk: imx: Fix PLL_1416X not rounding rates
Code which initializes the "clk_init_data.ops" checks pll->rate_table
before that field is ever assigned to so it always picks
"clk_pll1416x_min_ops".
This breaks dynamic rate rounding for features such as cpufreq.
Fix by checking pll_clk->rate_table instead, here pll_clk refers to
the constant initialization data coming from per-soc clk driver.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Fixes:
8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Weiyi Lu [Fri, 12 Apr 2019 03:30:27 +0000 (11:30 +0800)]
clk: mediatek: fix clk-gate flag setting
CLK_SET_RATE_PARENT would be dropped.
Merge two flag setting together to correct the error.
Fixes:
5a1cc4c27ad2 ("clk: mediatek: Add flags to mtk_gate")
Cc: <stable@vger.kernel.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Linus Torvalds [Fri, 12 Apr 2019 15:25:16 +0000 (08:25 -0700)]
Merge tag 'dma-mapping-5.1-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix a sparc64 sun4v_pci regression introduced in this merged window,
and a dma-debug stracktrace regression from the big refactor last
merge window"
* tag 'dma-mapping-5.1-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: only skip one stackframe entry
sparc64/pci_sun4v: fix ATU checks for large DMA masks
Linus Torvalds [Fri, 12 Apr 2019 15:21:15 +0000 (08:21 -0700)]
Merge tag 'iommu-fix-v5.1-rc5' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"Fix an AMD IOMMU issue where the driver didn't correctly setup the
exclusion range in the hardware registers, resulting in exclusion
ranges being one page too big.
This can cause data corruption of the address of that last page is
used by DMA operations"
* tag 'iommu-fix-v5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Set exclusion range correctly
Linus Torvalds [Fri, 12 Apr 2019 15:18:37 +0000 (08:18 -0700)]
Merge tag 'clang-format-for-linus-v5.1-rc5' of git://github.com/ojeda/linux
Pull clang-format update from Miguel Ojeda:
"The usual roughly-per-release .clang-format macro list update"
* tag 'clang-format-for-linus-v5.1-rc5' of git://github.com/ojeda/linux:
clang-format: Update with the latest for_each macro list
Linus Torvalds [Fri, 12 Apr 2019 15:16:40 +0000 (08:16 -0700)]
Merge tag 'mmc-v5.1-rc2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- alcor: Stabilize data write requests
- sdhci-omap: Fix command error path during tuning
* tag 'mmc-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
mmc: alcor: don't write data before command has completed
Linus Torvalds [Fri, 12 Apr 2019 15:11:59 +0000 (08:11 -0700)]
Merge tag 'sound-5.1-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Well, this one became unpleasantly larger than previous pull requests,
but it's a kind of usual pattern: now it contains a collection of ASoC
fixes, and nothing to worry too much.
The fixes for ASoC core (DAPM, DPCM, topology) are all small and just
covering corner cases. The rest changes are driver-specific, many of
which are for x86 platforms and new drivers like STM32, in addition to
the usual fixups for HD-audio"
* tag 'sound-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (66 commits)
ASoC: wcd9335: Fix missing regmap requirement
ALSA: hda: Fix racy display power access
ASoC: pcm: fix error handling when try_module_get() fails.
ASoC: stm32: sai: fix master clock management
ASoC: Intel: kbl: fix wrong number of channels
ALSA: hda - Add two more machines to the power_save_blacklist
ASoC: pcm: update module refcount if module_get_upon_open is set
ASoC: core: conditionally increase module refcount on component open
ASoC: stm32: fix sai driver name initialisation
ASoC: topology: Use the correct dobj to free enum control values and texts
ALSA: seq: Fix OOB-reads from strlcpy
ASoC: intel: skylake: add remove() callback for component driver
ASoC: cs35l35: Disable regulators on driver removal
ALSA: xen-front: Do not use stream buffer size before it is set
ASoC: rockchip: pdm: change dma burst to 8
ASoC: rockchip: pdm: fix regmap_ops hang issue
ASoC: simple-card: don't select DPCM via simple-audio-card
ASoC: audio-graph-card: don't select DPCM via audio-graph-card
ASoC: tlv320aic32x4: Change author's name
ALSA: hda/realtek - Add quirk for Tuxedo XC 1509
...
Linus Torvalds [Fri, 12 Apr 2019 15:07:46 +0000 (08:07 -0700)]
Merge tag 'acpi-5.1-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an ACPICA issue introduced during the 4.20 development cycle and
causing some systems to crash because of leftover operation region
data still maintained after the operation region in question has gone
away (Erik Schmauss)"
* tag 'acpi-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Namespace: remove address node from global list after method termination
Linus Torvalds [Fri, 12 Apr 2019 15:04:01 +0000 (08:04 -0700)]
Merge tag 'drm-fixes-2019-04-12' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fixes across the driver spectrum this week, the mediatek fbdev support
might be a bit late for this round, but I looked over it and it's not
very large and seems like a useful feature for them.
Otherwise the main thing is a regression fix for i915 5.0 bug that
caused black screens on a bunch of Dell XPS 15s I think, I know at
least Fedora is waiting for this to land, and the udl fix is also for
a regression since 5.0 where unplugging the device would end badly.
core:
- make atomic hooks optional
i915:
- Revert a 5.0 regression where some eDP panels stopped working
- DSI related fixes for platforms up to IceLake
- GVT (regression fix, warning fix, use-after free fix)
amdgpu:
- Cursor fixes
- missing PCI ID fix for KFD
- XGMI fix
- shadow buffer handling after reset fix
udl:
- fix unplugging device crashes.
mediatek:
- stabilise MT2701 HDMI support
- fbdev support
tegra:
- fix for build regression in rc1.
sun4i:
- Allwinner A6 max freq improvements
- null ptr deref fix
dw-hdmi:
- SCDC configuration improvements
omap:
- CEC clock management policy fix"
* tag 'drm-fixes-2019-04-12' of git://anongit.freedesktop.org/drm/drm: (32 commits)
gpu: host1x: Fix compile error when IOMMU API is not available
drm/i915/gvt: Roundup fb->height into tile's height at calucation fb->size
drm/i915/dp: revert back to max link rate and lane count on eDP
drm/i915/icl: Fix port disable sequence for mipi-dsi
drm/i915/icl: Ungate ddi clocks before IO enable
drm/mediatek: no change parent rate in round_rate() for MT2701 hdmi phy
drm/mediatek: using new factor for tvdpll for MT2701 hdmi phy
drm/mediatek: remove flag CLK_SET_RATE_PARENT for MT2701 hdmi phy
drm/mediatek: make implementation of recalc_rate() for MT2701 hdmi phy
drm/mediatek: fix the rate and divder of hdmi phy for MT2701
drm/mediatek: fix possible object reference leak
drm/i915: Get power refs in encoder->get_power_domains()
drm/i915: Fix pipe_bpp readout for BXT/GLK DSI
drm/amd/display: Fix negative cursor pos programming (v2)
drm/sun4i: tcon top: Fix NULL/invalid pointer dereference in sun8i_tcon_top_un/bind
drm/udl: add a release method and delay modeset teardown
drm/i915/gvt: Prevent use-after-free in ppgtt_free_all_spt()
drm/i915/gvt: Annotate iomem usage
drm/sun4i: DW HDMI: Lower max. supported rate for H6
Revert "Documentation/gpu/meson: Remove link to meson_canvas.c"
...
Will Deacon [Mon, 8 Apr 2019 11:45:09 +0000 (12:45 +0100)]
arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value
Rather embarrassingly, our futex() FUTEX_WAKE_OP implementation doesn't
explicitly set the return value on the non-faulting path and instead
leaves it holding the result of the underlying atomic operation. This
means that any FUTEX_WAKE_OP atomic operation which computes a non-zero
value will be reported as having failed. Regrettably, I wrote the buggy
code back in 2011 and it was upstreamed as part of the initial arm64
support in 2012.
The reasons we appear to get away with this are:
1. FUTEX_WAKE_OP is rarely used and therefore doesn't appear to get
exercised by futex() test applications
2. If the result of the atomic operation is zero, the system call
behaves correctly
3. Prior to version 2.25, the only operation used by GLIBC set the
futex to zero, and therefore worked as expected. From 2.25 onwards,
FUTEX_WAKE_OP is not used by GLIBC at all.
Fix the implementation by ensuring that the return value is either 0
to indicate that the atomic operation completed successfully, or -EFAULT
if we encountered a fault when accessing the user mapping.
Cc: <stable@kernel.org>
Fixes:
6170a97460db ("arm64: Atomic operations")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Joerg Roedel [Fri, 12 Apr 2019 10:50:31 +0000 (12:50 +0200)]
iommu/amd: Set exclusion range correctly
The exlcusion range limit register needs to contain the
base-address of the last page that is part of the range, as
bits 0-11 of this register are treated as 0xfff by the
hardware for comparisons.
So correctly set the exclusion range in the hardware to the
last page which is _in_ the range.
Fixes:
b2026aa2dce44 ('x86, AMD IOMMU: add functions for programming IOMMU MMIO space')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Miguel Ojeda [Sat, 30 Mar 2019 08:20:16 +0000 (09:20 +0100)]
clang-format: Update with the latest for_each macro list
Re-run the shell fragment that generated the original list now that
there are two dozens of new entries after v5.1's merge window.
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Peter Zijlstra [Thu, 4 Apr 2019 13:03:00 +0000 (15:03 +0200)]
perf/core: Fix perf_event_disable_inatomic() race
Thomas-Mich Richter reported he triggered a WARN()ing from event_function_local()
on his s390. The problem boils down to:
CPU-A CPU-B
perf_event_overflow()
perf_event_disable_inatomic()
@pending_disable = 1
irq_work_queue();
sched-out
event_sched_out()
@pending_disable = 0
sched-in
perf_event_overflow()
perf_event_disable_inatomic()
@pending_disable = 1;
irq_work_queue(); // FAILS
irq_work_run()
perf_pending_event()
if (@pending_disable)
perf_event_disable_local(); // WHOOPS
The problem exists in generic, but s390 is particularly sensitive
because it doesn't implement arch_irq_work_raise(), nor does it call
irq_work_run() from it's PMU interrupt handler (nor would that be
sufficient in this case, because s390 also generates
perf_event_overflow() from pmu::stop). Add to that the fact that s390
is a virtual architecture and (virtual) CPU-A can stall long enough
for the above race to happen, even if it would self-IPI.
Adding a irq_work_sync() to event_sched_in() would work for all hardare
PMUs that properly use irq_work_run() but fails for software PMUs.
Instead encode the CPU number in @pending_disable, such that we can
tell which CPU requested the disable. This then allows us to detect
the above scenario and even redirect the IPI to make up for the failed
queue.
Reported-by: Thomas-Mich Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Fri, 12 Apr 2019 03:39:22 +0000 (13:39 +1000)]
Merge tag 'drm-intel-fixes-2019-04-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Revert back to max link rate and lane count on eDP.
- DSI related fixes for all platforms including Ice Lake.
- GVT Fixes including one vGPU display plane size regression fix,
one for preventing use-after-free in ppgtt shadow free function,
and another warning fix for iomem access annotation.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411235832.GA6476@intel.com
Jason Yan [Fri, 12 Apr 2019 02:09:16 +0000 (10:09 +0800)]
block: fix the return errno for direct IO
If the last bio returned is not dio->bio, the status of the bio will
not assigned to dio->bio if it is error. This will cause the whole IO
status wrong.
ksoftirqd/21-117 [021] ..s. 4017.966090: 8,0 C N
4883648 [0]
<idle>-0 [018] ..s. 4017.970888: 8,0 C WS
4924800 + 1024 [0]
<idle>-0 [018] ..s. 4017.970909: 8,0 D WS
4935424 + 1024 [<idle>]
<idle>-0 [018] ..s. 4017.970924: 8,0 D WS
4936448 + 321 [<idle>]
ksoftirqd/21-117 [021] ..s. 4017.995033: 8,0 C R
4883648 + 336 [65475]
ksoftirqd/21-117 [021] d.s. 4018.001988: myprobe1: (blkdev_bio_end_io+0x0/0x168) bi_status=7
ksoftirqd/21-117 [021] d.s. 4018.001992: myprobe: (aio_complete_rw+0x0/0x148) x0=0xffff802f2595ad80 res=0x12a000 res2=0x0
We always have to assign bio->bi_status to dio->bio.bi_status because we
will only check dio->bio.bi_status when we return the whole IO to
the upper layer.
Fixes:
542ff7bf18c6 ("block: new direct I/O implementation")
Cc: stable@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 11 Apr 2019 21:19:02 +0000 (14:19 -0700)]
Merge tag 'for-5.1-rc4-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix parsing of compression algorithm when set as a inode property,
this could end up with eg. 'zst' or 'zli' in the value
- don't allow trim on a filesystem with unreplayed log, this could
cause data loss if there are pending updates to the block groups that
would not be subject to trim after replay
* tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prop: fix vanished compression property after failed set
btrfs: prop: fix zstd compression parameter validation
Btrfs: do not allow trimming when a fs is mounted with the nologreplay option
Dave Airlie [Thu, 11 Apr 2019 20:55:20 +0000 (06:55 +1000)]
Merge tag 'drm-misc-fixes-2019-04-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- core: Make atomic_enable and disable optional for CRTC
- dw-hdmi: Lower max frequency for the Allwinner H6, SCDC configuration
improvements for older controller versions
- omap: a fix for the CEC clock management policy
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411151658.orm46ccd5zmrw27l@flea
Trond Myklebust [Thu, 11 Apr 2019 19:16:52 +0000 (15:16 -0400)]
Revert "SUNRPC: Micro-optimise when the task is known not to be sleeping"
This reverts commit
009a82f6437490c262584d65a14094a818bcb747.
The ability to optimise here relies on compiler being able to optimise
away tail calls to avoid stack overflows. Unfortunately, we are seeing
reports of problems, so let's just revert.
Reported-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Olga Kornievskaia [Thu, 11 Apr 2019 18:34:18 +0000 (14:34 -0400)]
NFSv4.1 fix incorrect return value in copy_file_range
According to the NFSv4.2 spec if the input and output file is the
same file, operation should fail with EINVAL. However, linux
copy_file_range() system call has no such restrictions. Therefore,
in such case let's return EOPNOTSUPP and allow VFS to fallback
to doing do_splice_direct(). Also when copy_file_range is called
on an NFSv4.0 or 4.1 mount (ie., a server that doesn't support
COPY functionality), we also need to return EOPNOTSUPP and
fallback to a regular copy.
Fixes xfstest generic/075, generic/091, generic/112, generic/263
for all NFSv4.x versions.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Chuck Lever [Tue, 9 Apr 2019 21:04:09 +0000 (17:04 -0400)]
xprtrdma: Fix helper that drains the transport
We want to drain only the RQ first. Otherwise the transport can
deadlock on ->close if there are outstanding Send completions.
Fixes:
6d2d0ee27c7a ("xprtrdma: Replace rpcrdma_receive_wq ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Chuck Lever [Tue, 9 Apr 2019 14:44:16 +0000 (10:44 -0400)]
NFS: Fix handling of reply page vector
NFSv4 GETACL and FS_LOCATIONS requests stopped working in v5.1-rc.
These two need the extra padding to be added directly to the reply
length.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes:
02ef04e432ba ("NFS: Account for XDR pad of buf->pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>