OSDN Git Service
Shay Drory [Wed, 6 May 2020 12:59:48 +0000 (15:59 +0300)]
net/mlx5: drain health workqueue in case of driver load error
In case there is a work in the health WQ when we teardown the driver,
in driver load error flow, the health work will try to read dev->iseg,
which was already unmap in mlx5_pci_close().
Fix it by draining the health workqueue first thing in mlx5_pci_close().
Trace of the error:
BUG: unable to handle page fault for address:
ffffb5b141c18014
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD
1fe95d067 P4D
1fe95d067 PUD
1fe95e067 PMD
1b7823067 PTE 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 6755 Comm: kworker/u128:2 Not tainted 5.2.0-net-next-mlx5-hv_stats-over-last-worked-hyperv #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016
Workqueue: mlx5_healtha050:00:02.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
RIP: 0010:ioread32be+0x30/0x40
Code: 00 77 27 48 81 ff 00 00 01 00 76 07 0f b7 d7 ed 0f c8 c3 55 48 c7 c6 3b ee d5 9f 48 89 e5 e8 67 fc ff ff b8 ff ff ff ff 5d c3 <8b> 07 0f c8 c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 fe ff ff 03
RSP: 0018:
ffffb5b14c56fd78 EFLAGS:
00010292
RAX:
ffffb5b141c18000 RBX:
ffff8e9f78a801c0 RCX:
0000000000000000
RDX:
0000000000000001 RSI:
ffff8e9f7ecd7628 RDI:
ffffb5b141c18014
RBP:
ffffb5b14c56fd90 R08:
0000000000000001 R09:
0000000000000000
R10:
ffff8e9f372a2c30 R11:
ffff8e9f87f4bc40 R12:
ffff8e9f372a1fc0
R13:
ffff8e9f78a80000 R14:
ffffffffc07136a0 R15:
ffff8e9f78ae6f20
FS:
0000000000000000(0000) GS:
ffff8e9f7ecc0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffb5b141c18014 CR3:
00000001c8f82006 CR4:
00000000003606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
? mlx5_health_try_recover+0x4d/0x270 [mlx5_core]
mlx5_fw_fatal_reporter_recover+0x16/0x20 [mlx5_core]
devlink_health_reporter_recover+0x1c/0x50
devlink_health_report+0xfb/0x240
mlx5_fw_fatal_reporter_err_work+0x65/0xd0 [mlx5_core]
process_one_work+0x1fb/0x4e0
? process_one_work+0x16b/0x4e0
worker_thread+0x4f/0x3d0
kthread+0x10d/0x140
? process_one_work+0x4e0/0x4e0
? kthread_cancel_delayed_work_sync+0x20/0x20
ret_from_fork+0x1f/0x30
Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache 8021q garp mrp stp llc ipmi_devintf ipmi_msghandler rpcrdma rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm mlx5_ib ib_uverbs ib_core mlx5_core sb_edac crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 mlxfw crypto_simd cryptd glue_helper input_leds hyperv_fb intel_rapl_perf joydev serio_raw pci_hyperv pci_hyperv_mini mac_hid hv_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel ip_tables x_tables autofs4 hv_utils hid_generic hv_storvsc ptp hid_hyperv hid hv_netvsc hyperv_keyboard pps_core scsi_transport_fc psmouse hv_vmbus i2c_piix4 floppy pata_acpi
CR2:
ffffb5b141c18014
---[ end trace
b12c5503157cad24 ]---
RIP: 0010:ioread32be+0x30/0x40
Code: 00 77 27 48 81 ff 00 00 01 00 76 07 0f b7 d7 ed 0f c8 c3 55 48 c7 c6 3b ee d5 9f 48 89 e5 e8 67 fc ff ff b8 ff ff ff ff 5d c3 <8b> 07 0f c8 c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 fe ff ff 03
RSP: 0018:
ffffb5b14c56fd78 EFLAGS:
00010292
RAX:
ffffb5b141c18000 RBX:
ffff8e9f78a801c0 RCX:
0000000000000000
RDX:
0000000000000001 RSI:
ffff8e9f7ecd7628 RDI:
ffffb5b141c18014
RBP:
ffffb5b14c56fd90 R08:
0000000000000001 R09:
0000000000000000
R10:
ffff8e9f372a2c30 R11:
ffff8e9f87f4bc40 R12:
ffff8e9f372a1fc0
R13:
ffff8e9f78a80000 R14:
ffffffffc07136a0 R15:
ffff8e9f78ae6f20
FS:
0000000000000000(0000) GS:
ffff8e9f7ecc0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffb5b141c18014 CR3:
00000001c8f82006 CR4:
00000000003606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
BUG: sleeping function called from invalid context at ./include/linux/percpu-rwsem.h:38
in_atomic(): 0, irqs_disabled(): 1, pid: 6755, name: kworker/u128:2
INFO: lockdep is turned off.
CPU: 3 PID: 6755 Comm: kworker/u128:2 Tainted: G D 5.2.0-net-next-mlx5-hv_stats-over-last-worked-hyperv #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016
Workqueue: mlx5_healtha050:00:02.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
dump_stack+0x63/0x88
___might_sleep+0x10a/0x130
__might_sleep+0x4a/0x80
exit_signals+0x33/0x230
? blocking_notifier_call_chain+0x16/0x20
do_exit+0xb1/0xc30
? kthread+0x10d/0x140
? process_one_work+0x4e0/0x4e0
Fixes:
52c368dc3da7 ("net/mlx5: Move health and page alloc init to mdev_init")
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Tuong Lien [Thu, 11 Jun 2020 10:08:08 +0000 (17:08 +0700)]
tipc: fix NULL pointer dereference in tipc_disc_rcv()
When a bearer is enabled, we create a 'tipc_discoverer' object to store
the bearer related data along with a timer and a preformatted discovery
message buffer for later probing... However, this is only carried after
the bearer was set 'up', that left a race condition resulting in kernel
panic.
It occurs when a discovery message from a peer node is received and
processed in bottom half (since the bearer is 'up' already) just before
the discoverer object is created but is now accessed in order to update
the preformatted buffer (with a new trial address, ...) so leads to the
NULL pointer dereference.
We solve the problem by simply moving the bearer 'up' setting to later,
so make sure everything is ready prior to any message receiving.
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien [Thu, 11 Jun 2020 10:07:35 +0000 (17:07 +0700)]
tipc: fix kernel WARNING in tipc_msg_append()
syzbot found the following issue:
WARNING: CPU: 0 PID: 6808 at include/linux/thread_info.h:150 check_copy_size include/linux/thread_info.h:150 [inline]
WARNING: CPU: 0 PID: 6808 at include/linux/thread_info.h:150 copy_from_iter include/linux/uio.h:144 [inline]
WARNING: CPU: 0 PID: 6808 at include/linux/thread_info.h:150 tipc_msg_append+0x49a/0x5e0 net/tipc/msg.c:242
Kernel panic - not syncing: panic_on_warn set ...
This happens after commit
5e9eeccc58f3 ("tipc: fix NULL pointer
dereference in streaming") that tried to build at least one buffer even
when the message data length is zero... However, it now exposes another
bug that the 'mss' can be zero and the 'cpy' will be negative, thus the
above kernel WARNING will appear!
The zero value of 'mss' is never expected because it means Nagle is not
enabled for the socket (actually the socket type was 'SOCK_SEQPACKET'),
so the function 'tipc_msg_append()' must not be called at all. But that
was in this particular case since the message data length was zero, and
the 'send <= maxnagle' check became true.
We resolve the issue by explicitly checking if Nagle is enabled for the
socket, i.e. 'maxnagle != 0' before calling the 'tipc_msg_append()'. We
also reinforce the function to against such a negative values if any.
Reported-by: syzbot+75139a7d2605236b0b7f@syzkaller.appspotmail.com
Fixes:
c0bceb97db9e ("tipc: add smart nagle feature")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 11 Jun 2020 04:07:39 +0000 (21:07 -0700)]
ionic: remove support for mgmt device
We no longer support the mgmt device in the ionic driver,
so remove the device id and related code.
Fixes:
b3f064e9746d ("ionic: add support for device id 0x1004")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xu Wang [Thu, 11 Jun 2020 02:45:20 +0000 (02:45 +0000)]
drivers: dpaa2: Use devm_kcalloc() in setup_dpni()
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 10 Jun 2020 23:59:11 +0000 (16:59 -0700)]
docs: networkng: convert sja1105's devlink info to RTS
A new file snuck into the tree after all existing documentation
was converted to RST. Convert sja1105's devlink info and move
it where the rest of the drivers are documented.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Jun 2020 00:05:02 +0000 (17:05 -0700)]
Merge branch 'chcr-Fixing-issues-in-dma-mapping-and-driver-removal'
Ayush Sawal says:
====================
Fixing issues in dma mapping and driver removal
Patch 1: This fixes the kernel panic which occurs due to the accessing
of a zero length sg.
Patch 2: Avoiding unregistering the algorithm if cra_refcnt is not 1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ayush Sawal [Tue, 9 Jun 2020 21:24:32 +0000 (02:54 +0530)]
Crypto/chcr: Checking cra_refcnt before unregistering the algorithms
This patch puts a check for algorithm unregister, to avoid removal of
driver if the algorithm is under use.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ayush Sawal [Tue, 9 Jun 2020 21:24:31 +0000 (02:54 +0530)]
Crypto/chcr: Calculate src and dst sg lengths separately for dma map
This patch calculates src and dst sg lengths separately for
dma mapping in case of aead operation.
This fixes a panic which occurs due to the accessing of a zero
length sg.
Panic:
[ 138.173225] kernel BUG at drivers/iommu/intel-iommu.c:1184!
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 10 Jun 2020 23:09:06 +0000 (16:09 -0700)]
docs: networkng: fix lists and table in sja1105
We need an empty line before list stats, otherwise first point
will be smooshed into the paragraph. Inside tables text must
start at the same offset in the cell, otherwise sphinx thinks
it's a new indented block.
Documentation/networking/dsa/sja1105.rst:108: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/networking/dsa/sja1105.rst:112: WARNING: Definition list ends without a blank line; unexpected unindent.
Documentation/networking/dsa/sja1105.rst:245: WARNING: Unexpected indentation.
Documentation/networking/dsa/sja1105.rst:246: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/networking/dsa/sja1105.rst:253: WARNING: Unexpected indentation.
Documentation/networking/dsa/sja1105.rst:254: WARNING: Block quote ends without a blank line; unexpected unindent.
Fixes:
a20bc43bfb2e ("docs: net: dsa: sja1105: document the best_effort_vlan_filtering option")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 10 Jun 2020 22:36:48 +0000 (15:36 -0700)]
docs: networking: fix extra spaces in ethtool-netlink
Sphinx appears to get upset at extra spaces at the end of a literal:
Documentation/networking/ethtool-netlink.rst:1032: WARNING: Inline literal start-string without end-string.
Documentation/networking/ethtool-netlink.rst:1034: WARNING: Inline literal start-string without end-string.
Documentation/networking/ethtool-netlink.rst:1036: WARNING: Inline literal start-string without end-string.
Documentation/networking/ethtool-netlink.rst:1089: WARNING: Inline literal start-string without end-string.
Documentation/networking/ethtool-netlink.rst:1091: WARNING: Inline literal start-string without end-string.
Documentation/networking/ethtool-netlink.rst:1093: WARNING: Inline literal start-string without end-string.
Fixes:
f2bc8ad31a7f ("net: ethtool: Allow PHY cable test TDR data to configured")
Fixes:
a331172b156b ("net: ethtool: Add attributes for cable test TDR data")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corentin Labbe [Wed, 10 Jun 2020 09:53:44 +0000 (09:53 +0000)]
net: cadence: macb: disable NAPI on error
When the PHY is not working, the macb driver crash on a second try to
setup it.
[ 78.545994] macb
e000b000.ethernet eth0: Could not attach PHY (-19)
ifconfig: SIOCSIFFLAGS: No such device
[ 78.655457] ------------[ cut here ]------------
[ 78.656014] kernel BUG at /linux-next/include/linux/netdevice.h:521!
[ 78.656504] Internal error: Oops - BUG: 0 [#1] SMP ARM
[ 78.657079] Modules linked in:
[ 78.657795] CPU: 0 PID: 122 Comm: ifconfig Not tainted 5.7.0-next-
20200609 #1
[ 78.658202] Hardware name: Xilinx Zynq Platform
[ 78.659632] PC is at macb_open+0x220/0x294
[ 78.660160] LR is at 0x0
[ 78.660373] pc : [<
c0b0a634>] lr : [<
00000000>] psr:
60000013
[ 78.660716] sp :
c89ffd70 ip :
c8a28800 fp :
c199bac0
[ 78.661040] r10:
00000000 r9 :
c8838540 r8 :
c8838568
[ 78.661362] r7 :
00000001 r6 :
c8838000 r5 :
c883c000 r4 :
00000000
[ 78.661724] r3 :
00000010 r2 :
00000000 r1 :
00000000 r0 :
00000000
[ 78.662187] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 78.662635] Control:
10c5387d Table:
08b64059 DAC:
00000051
[ 78.663035] Process ifconfig (pid: 122, stack limit = 0x(ptrval))
[ 78.663476] Stack: (0xc89ffd70 to 0xc8a00000)
[ 78.664121] fd60:
00000000 c89fe000 c8838000 c89fe000
[ 78.664866] fd80:
00000000 c11ff9ac c8838028 00000000 00000000 c0de6f2c 00000001 c1804eec
[ 78.665579] fda0:
c19b8178 c8838000 00000000 ca760866 c8838000 00000001 00001043 c89fe000
[ 78.666355] fdc0:
00001002 c0de72f4 c89fe000 c0de8dc0 00008914 c89fe000 c199bac0 ca760866
[ 78.667111] fde0:
c89ffddc c8838000 00001002 00000000 c8838138 c881010c 00008914 c0de7364
[ 78.667862] fe00:
00000000 c89ffe70 c89fe000 ffffffff c881010c c0e8bd48 00000003 00000000
[ 78.668601] fe20:
c8838000 c8810100 39c1118f 00039c11 c89a0960 00001043 00000000 000a26d0
[ 78.669343] fe40:
b6f43000 ca760866 c89a0960 00000051 befe6c50 00008914 c8b2a3c0 befe6c50
[ 78.670086] fe60:
00000003 ee610500 00000000 c0e8ef58 30687465 00000000 00000000 00000000
[ 78.670865] fe80:
00001043 00000000 000a26d0 b6f43000 c89a0600 ee40ae7c c8870d00 c0ddabf4
[ 78.671593] fea0:
c89ffeec c0ddabf4 c89ffeec c199bac0 00008913 c0ddac48 c89ffeec c89fe000
[ 78.672324] fec0:
befe6c50 ca760866 befe6c50 00008914 c89fe000 befe6c50 c8b2a3c0 c0dc00e4
[ 78.673088] fee0:
c89a0480 00000201 00000cc0 30687465 00000000 00000000 00000000 00001002
[ 78.673822] ff00:
00000000 000a26d0 b6f43000 ca760866 00008914 c8b2a3c0 000a0ec4 c8b2a3c0
[ 78.674576] ff20:
befe6c50 c04b21bc 000d5004 00000817 c89a0480 c0315f94 00000000 00000003
[ 78.675415] ff40:
c19a2bc8 c8a3cc00 c89fe000 00000255 00000000 00000000 00000000 000d5000
[ 78.676182] ff60:
000f6000 c180b2a0 00000817 c0315e64 000d5004 c89fffb0 b6ec0c30 ca760866
[ 78.676928] ff80:
00000000 000b609b befe6c50 000a0ec4 00000036 c03002c4 c89fe000 00000036
[ 78.677673] ffa0:
00000000 c03000c0 000b609b befe6c50 00000003 00008914 befe6c50 000b609b
[ 78.678415] ffc0:
000b609b befe6c50 000a0ec4 00000036 befe6e0c befe6f1a 000d5150 00000000
[ 78.679154] ffe0:
000d41e4 befe6bf4 00019648 b6e4509c 20000010 00000003 00000000 00000000
[ 78.681059] [<
c0b0a634>] (macb_open) from [<
c0de6f2c>] (__dev_open+0xd0/0x154)
[ 78.681571] [<
c0de6f2c>] (__dev_open) from [<
c0de72f4>] (__dev_change_flags+0x16c/0x1c4)
[ 78.682015] [<
c0de72f4>] (__dev_change_flags) from [<
c0de7364>] (dev_change_flags+0x18/0x48)
[ 78.682493] [<
c0de7364>] (dev_change_flags) from [<
c0e8bd48>] (devinet_ioctl+0x5e4/0x75c)
[ 78.682945] [<
c0e8bd48>] (devinet_ioctl) from [<
c0e8ef58>] (inet_ioctl+0x1f0/0x3b4)
[ 78.683381] [<
c0e8ef58>] (inet_ioctl) from [<
c0dc00e4>] (sock_ioctl+0x39c/0x664)
[ 78.683818] [<
c0dc00e4>] (sock_ioctl) from [<
c04b21bc>] (ksys_ioctl+0x2d8/0x9c0)
[ 78.684343] [<
c04b21bc>] (ksys_ioctl) from [<
c03000c0>] (ret_fast_syscall+0x0/0x54)
[ 78.684789] Exception stack(0xc89fffa8 to 0xc89ffff0)
[ 78.685346] ffa0:
000b609b befe6c50 00000003 00008914 befe6c50 000b609b
[ 78.686106] ffc0:
000b609b befe6c50 000a0ec4 00000036 befe6e0c befe6f1a 000d5150 00000000
[ 78.686710] ffe0:
000d41e4 befe6bf4 00019648 b6e4509c
[ 78.687582] Code:
9a000003 e5983078 e3130001 1affffef (
e7f001f2)
[ 78.688788] ---[ end trace
e3f2f6ab69754eae ]---
This is due to NAPI left enabled if macb_phylink_connect() fail.
Fixes:
7897b071ac3b ("net: macb: convert to phylink")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 10 Jun 2020 08:49:00 +0000 (10:49 +0200)]
mptcp: don't leak msk in token container
If a listening MPTCP socket has unaccepted sockets at close
time, the related msks are freed via mptcp_sock_destruct(),
which in turn does not invoke the proto->destroy() method
nor the mptcp_token_destroy() function.
Due to the above, the child msk socket is not removed from
the token container, leading to later UaF.
Address the issue explicitly removing the token even in the
above error path.
Fixes:
79c0949e9a09 ("mptcp: Add key generation and token tree")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 10 Jun 2020 08:47:41 +0000 (10:47 +0200)]
mptcp: fix races between shutdown and recvmsg
The msk sk_shutdown flag is set by a workqueue, possibly
introducing some delay in user-space notification. If the last
subflow carries some data with the fin packet, the user space
can wake-up before RCV_SHUTDOWN is set. If it executes unblocking
recvmsg(), it may return with an error instead of eof.
Address the issue explicitly checking for eof in recvmsg(), when
no data is found.
Fixes:
59832e246515 ("mptcp: subflow: check parent mptcp socket on subflow state change")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 9 Jun 2020 23:27:28 +0000 (17:27 -0600)]
vxlan: Remove access to nexthop group struct
vxlan driver should be using helpers to access nexthop struct
internals. Remove open check if whether nexthop is multipath in
favor of the existing nexthop_is_multipath helper. Add a new
helper, nexthop_has_v4, to cover the need to check has_v4 in
a group.
Fixes:
1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 9 Jun 2020 02:54:43 +0000 (20:54 -0600)]
nexthop: Fix fdb labeling for groups
fdb nexthops are marked with a flag. For standalone nexthops, a flag was
added to the nh_info struct. For groups that flag was added to struct
nexthop when it should have been added to the group information. Fix
by removing the flag from the nexthop struct and adding a flag to nh_group
that mirrors nh_info and is really only a caching of the individual types.
Add a helper, nexthop_is_fdb, for use by the vxlan code and fixup the
internal code to use the flag from either nh_info or nh_group.
v2
- propagate fdb_nh in remove_nh_grp_entry
Fixes:
38428d68719c ("nexthop: support for fdb ecmp nexthops")
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jun 2020 21:47:44 +0000 (23:47 +0200)]
net: flow_offload: remove indirect flow_block declarations leftover
Remove function declarations that are not available in the tree anymore.
Fixes:
709ffbe19b77 ("net: remove indirect block netdev event registration")
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tannerlove [Tue, 9 Jun 2020 21:21:32 +0000 (17:21 -0400)]
selftests/net: in rxtimestamp getopt_long needs terminating null entry
getopt_long requires the last element to be filled with zeros.
Otherwise, passing an unrecognized option can cause a segfault.
Fixes:
16e781224198 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Mon, 8 Jun 2020 22:02:39 +0000 (00:02 +0200)]
net: mvneta: do not redirect frames during reconfiguration
Disable frames injection in mvneta_xdp_xmit routine during hw
re-configuration in order to avoid hardware hangs
Fixes:
b0a43db9087a ("net: mvneta: add XDP_TX support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Hai [Tue, 9 Jun 2020 14:18:16 +0000 (22:18 +0800)]
dccp: Fix possible memleak in dccp_init and dccp_fini
There are some memory leaks in dccp_init() and dccp_fini().
In dccp_fini() and the error handling path in dccp_init(), free lhash2
is missing. Add inet_hashinfo2_free_mod() to do it.
If inet_hashinfo2_init_mod() failed in dccp_init(),
percpu_counter_destroy() should be called to destroy dccp_orphan_count.
It need to goto out_free_percpu when inet_hashinfo2_init_mod() failed.
Fixes:
c92c81df93df ("net: dccp: fix kernel crash on module load")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Tue, 9 Jun 2020 03:41:43 +0000 (20:41 -0700)]
ionic: wait on queue start until after IFF_UP
The netif_running() test looks at __LINK_STATE_START which
gets set before ndo_open() is called, there is a window of
time between that and when the queues are actually ready to
be run. If ionic_check_link_status() notices that the link is
up very soon after netif_running() becomes true, it might try
to run the queues before they are ready, causing all manner of
potential issues. Since the netdev->flags IFF_UP isn't set
until after ndo_open() returns, we can wait for that before
we allow ionic_check_link_status() to start the queues.
On the way back to close, __LINK_STATE_START is cleared before
calling ndo_stop(), and IFF_UP is cleared after. Both of
these need to be true in order to safely stop the queues
from ionic_check_link_status().
Fixes:
49d3b493673a ("ionic: disable the queues on link down")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Valentin Longchamp [Tue, 9 Jun 2020 20:11:54 +0000 (22:11 +0200)]
net: sched: export __netdev_watchdog_up()
Since the quiesce/activate rework, __netdev_watchdog_up() is directly
called in the ucc_geth driver.
Unfortunately, this function is not available for modules and thus
ucc_geth cannot be built as a module anymore. Fix it by exporting
__netdev_watchdog_up().
Since the commit introducing the regression was backported to stable
branches, this one should ideally be as well.
Fixes:
79dde73cf9bc ("net/ethernet/freescale: rework quiesce/activate for ucc_geth")
Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Mon, 8 Jun 2020 21:53:01 +0000 (14:53 -0700)]
net: change addr_list_lock back to static key
The dynamic key update for addr_list_lock still causes troubles,
for example the following race condition still exists:
CPU 0: CPU 1:
(RCU read lock) (RTNL lock)
dev_mc_seq_show() netdev_update_lockdep_key()
-> lockdep_unregister_key()
-> netif_addr_lock_bh()
because lockdep doesn't provide an API to update it atomically.
Therefore, we have to move it back to static keys and use subclass
for nest locking like before.
In commit
1a33e10e4a95 ("net: partially revert dynamic lockdep key
changes"), I already reverted most parts of commit
ab92d68fc22f
("net: core: add generic lockdep keys").
This patch reverts the rest and also part of commit
f3b0a18bb6cb
("net: remove unnecessary variables and callback"). After this
patch, addr_list_lock changes back to using static keys and
subclasses to satisfy lockdep. Thanks to dev->lower_level, we do
not have to change back to ->ndo_get_lock_subclass().
And hopefully this reduces some syzbot lockdep noises too.
Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tannerlove [Mon, 8 Jun 2020 19:37:15 +0000 (15:37 -0400)]
selftests/net: in timestamping, strncpy needs to preserve null byte
If user passed an interface option longer than 15 characters, then
device.ifr_name and hwtstamp.ifr_name became non-null-terminated
strings. The compiler warned about this:
timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \
destination size [-Wstringop-truncation]
353 | strncpy(device.ifr_name, interface, sizeof(device.ifr_name));
Fixes:
cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 9 Jun 2020 02:13:37 +0000 (19:13 -0700)]
Merge tag 'rxrpc-fixes-
20200605' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fix hang due to missing notification
Here's a fix for AF_RXRPC. Occasionally calls hang because there are
circumstances in which rxrpc generate a notification when a call is
completed - primarily because initial packet transmission failed and the
call was killed off and an error returned. But the AFS filesystem driver
doesn't check this under all circumstances, expecting failure to be
delivered by asynchronous notification.
There are two patches: the first moves the problematic bits out-of-line and
the second contains the fix.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Mon, 8 Jun 2020 10:47:54 +0000 (18:47 +0800)]
mptcp: bugfix for RM_ADDR option parsing
In MPTCPOPT_RM_ADDR option parsing, the pointer "ptr" pointed to the
"Subtype" octet, the pointer "ptr+1" pointed to the "Address ID" octet:
+-------+-------+---------------+
|Subtype|(resvd)| Address ID |
+-------+-------+---------------+
| |
ptr ptr+1
We should set mp_opt->rm_id to the value of "ptr+1", not "ptr". This patch
will fix this bug.
Fixes:
3df523ab582c ("mptcp: Add ADD_ADDR handling")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arjun Roy [Mon, 8 Jun 2020 01:54:41 +0000 (18:54 -0700)]
net-zerocopy: use vm_insert_pages() for tcp rcv zerocopy
Use vm_insert_pages() for tcp receive zerocopy. Spin lock cycles (as
reported by perf) drop from a couple of percentage points to a fraction of
a percent. This results in a roughly 6% increase in efficiency, measured
roughly as zerocopy receive count divided by CPU utilization.
The intention of this patchset is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.
[akpm@linux-foundation.org: suppress gcc-7.2.0 warning]
Link: http://lkml.kernel.org/r/20200128025958.43490-3-arjunroy.kdev@gmail.com
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pooja Trivedi [Fri, 5 Jun 2020 16:01:18 +0000 (16:01 +0000)]
net/tls(TLS_SW): Add selftest for 'chunked' sendfile test
This selftest tests for cases where sendfile's 'count'
parameter is provided with a size greater than the intended
file size.
Motivation: When sendfile is provided with 'count' parameter
value that is greater than the size of the file, kTLS example
fails to send the file correctly. Last chunk of the file is
not sent, and the data integrity is compromised.
The reason is that the last chunk has MSG_MORE flag set
because of which it gets added to pending records, but is
not pushed.
Note that if user space were to send SSL_shutdown control
message, pending records would get flushed and the issue
would not happen. So a shutdown control message following
sendfile can mask the issue.
Signed-off-by: Pooja Trivedi <pooja.trivedi@stackpath.com>
Signed-off-by: Mallesham Jatharkonda <mallesham.jatharkonda@oneconvergence.com>
Signed-off-by: Josh Tway <josh.tway@stackpath.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 9 Jun 2020 00:14:19 +0000 (17:14 -0700)]
Merge tag 'mac80211-for-davem-2020-06-08' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a small update:
* fix the deadlock on rfkill/wireless removal that a few
people reported
* fix an uninitialized variable
* update wiki URLs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Flavio Suligoi [Fri, 5 Jun 2020 15:41:12 +0000 (17:41 +0200)]
net: fix wiki website url mac80211 and wireless files
In the files:
- net/mac80211/rx.c
- net/wireless/Kconfig
the wiki url is still the old "wireless.kernel.org"
instead of the new "wireless.wiki.kernel.org"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20200605154112.16277-10-f.suligoi@asem.it
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Flavio Suligoi [Fri, 5 Jun 2020 15:41:11 +0000 (17:41 +0200)]
include: fix wiki website url in netlink interface header
The wiki url is still the old "wireless.kernel.org"
instead of the new "wireless.wiki.kernel.org"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20200605154112.16277-9-f.suligoi@asem.it
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Flavio Suligoi [Fri, 5 Jun 2020 15:41:04 +0000 (17:41 +0200)]
doc: networking: wireless: fix wiki website url
In the files:
- regulatory.rst
- mac80211-injection.rst
the wiki url is still the old "wireless.kernel.org"
instead of the new "wireless.wiki.kernel.org"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20200605154112.16277-2-f.suligoi@asem.it
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Linus Torvalds [Mon, 8 Jun 2020 00:27:45 +0000 (17:27 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
- Fix the build with certain Kconfig combinations for the Chelsio
inline TLS device, from Rohit Maheshwar and Vinay Kumar Yadavi.
- Fix leak in genetlink, from Cong Lang.
- Fix out of bounds packet header accesses in seg6, from Ahmed
Abdelsalam.
- Two XDP fixes in the ENA driver, from Sameeh Jubran
- Use rwsem in device rename instead of a seqcount because this code
can sleep, from Ahmed S. Darwish.
- Fix WoL regressions in r8169, from Heiner Kallweit.
- Fix qed crashes in kdump mode, from Alok Prasad.
- Fix the callbacks used for certain thermal zones in mlxsw, from Vadim
Pasternak.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
net: dsa: lantiq_gswip: fix and improve the unsupported interface error
mlxsw: core: Use different get_trend() callbacks for different thermal zones
net: dp83869: Reset return variable if PHY strap is read
rhashtable: Drop raw RCU deref in nested_table_free
cxgb4: Use kfree() instead kvfree() where appropriate
net: qed: fixes crash while running driver in kdump kernel
vsock/vmci: make vmci_vsock_transport_cb() static
net: ethtool: Fix comment mentioning typo in IS_ENABLED()
net: phy: mscc: fix Serdes configuration in vsc8584_config_init
net: mscc: Fix OF_MDIO config check
net: marvell: Fix OF_MDIO config check
net: dp83867: Fix OF_MDIO config check
net: dp83869: Fix OF_MDIO config check
net: ethernet: mvneta: fix MVNETA_SKB_HEADROOM alignment
ethtool: linkinfo: remove an unnecessary NULL check
net/xdp: use shift instead of 64 bit division
crypto/chtls:Fix compile error when CONFIG_IPV6 is disabled
inet_connection_sock: clear inet_num out of destroy helper
yam: fix possible memory leak in yam_init_driver
lan743x: Use correct MAC_CR configuration for 1 GBit speed
...
Linus Torvalds [Mon, 8 Jun 2020 00:25:29 +0000 (17:25 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-next
Pull sparc updates from David Miller:
- Rework the sparc32 page tables so that READ_ONCE(*pmd), as done by
generic code, operates on a word sized element. From Will Deacon.
- Some scnprintf() conversions, from Chen Zhou.
- A pin_user_pages() conversion from John Hubbard.
- Several 32-bit ptrace register handling fixes and such from Al Viro.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()"
sparc32: mm: Only call ctor()/dtor() functions for first and last user
sparc32: mm: Disable SPLIT_PTLOCK_CPUS
sparc32: mm: Don't try to free page-table pages if ctor() fails
sparc32: register memory occupied by kernel as memblock.memory
sparc: remove unused header file nfs_fs.h
sparc32: fix register window handling in genregs32_[gs]et()
sparc64: fix misuses of access_process_vm() in genregs32_[sg]et()
oradax: convert get_user_pages() --> pin_user_pages()
sparc: use scnprintf() in show_pciobppath_attr() in vio.c
sparc: use scnprintf() in show_pciobppath_attr() in pci.c
tty: vcc: Fix error return code in vcc_probe()
sparc32: mm: Reduce allocation size for PMD and PTE tables
sparc32: mm: Change pgtable_t type to pte_t * instead of struct page *
sparc32: mm: Restructure sparc32 MMU page-table layout
sparc32: mm: Fix argument checking in __srmmu_get_nocache()
sparc64: Replace zero-length array with flexible-array
sparc: mm: return true,false in kern_addr_valid()
David S. Miller [Mon, 8 Jun 2020 00:11:41 +0000 (17:11 -0700)]
Merge git://git./linux/kernel/git/davem/sparc
Martin Blumenstingl [Sun, 7 Jun 2020 13:02:58 +0000 (15:02 +0200)]
net: dsa: lantiq_gswip: fix and improve the unsupported interface error
While trying to use the lantiq_gswip driver on one of my boards I made
a mistake when specifying the phy-mode (because the out-of-tree driver
wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the
following error is printed multiple times:
Unsupported interface: 3
While it gives at least a hint at what may be wrong it is not very user
friendly. Print the human readable phy-mode and also which port is
configured incorrectly (this hardware supports ports 0..6) to improve
the cases where someone made a mistake.
Fixes:
14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Sun, 7 Jun 2020 08:10:27 +0000 (11:10 +0300)]
mlxsw: core: Use different get_trend() callbacks for different thermal zones
The driver registers three different types of thermal zones: For the
ASIC itself, for port modules and for gearboxes.
Currently, all three types use the same get_trend() callback which does
not work correctly for the ASIC thermal zone. The callback assumes that
the device data is of type 'struct mlxsw_thermal_module', whereas for
the ASIC thermal zone 'struct mlxsw_thermal' is passed as device data.
Fix this by using one get_trend() callback for the ASIC thermal zone and
another for the other two types.
Fixes:
6f73862fabd9 ("mlxsw: core: Add the hottest thermal zone detection")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 7 Jun 2020 23:40:14 +0000 (16:40 -0700)]
Merge branch 'for-davem' of git://git./linux/kernel/git/viro/vfs
Linus Torvalds [Sun, 7 Jun 2020 23:13:43 +0000 (16:13 -0700)]
Merge tag 'pinctrl-v5.8-1' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.8 kernel cycle.
It's just really boring this time. Zero core changes. Just linear
development, cleanups and misc noncritical fixes. Some new drivers for
very new Qualcomm and Intel chips.
New drivers:
- Intel Jasper Lake support.
- NXP Freescale i.MX8DXL support.
- Qualcomm SM8250 support.
- Renesas R8A7742 SH-PFC support.
Driver improvements:
- Severe cleanup and modernization of the MCP23s08 driver.
- Mediatek driver modularized.
- Setting config supported in the Meson driver.
- Wakeup support for the Broadcom BCM7211"
* tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: sprd: Fix the incorrect pull-up definition
pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken
pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'
pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe()
pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
pinctrl: bcm2835: Add support for wake-up interrupts
pinctrl: bcm2835: Match BCM7211 compatible string
dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts
dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt
dt-bindings: pinctrl: stm32: Add missing interrupts property
pinctrl: at91-pio4: Add COMPILE_TEST support
pinctrl: Fix return value about devm_platform_ioremap_resource()
MAINTAINERS: Renesas Pin Controllers are supported
dt-bindings: pinctrl: ocelot: Add Sparx5 SoC support
pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2
pinctrl: ocelot: Remove instance number from pin functions
pinctrl: ocelot: Always register GPIO driver
dt-bindings: pinctrl: rockchip: update example
pinctrl: amd: Add ACPI dependency
...
Linus Torvalds [Sun, 7 Jun 2020 23:11:23 +0000 (16:11 -0700)]
Merge tag 'rtc-5.8' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Not much this cycle apart from the ingenic rtc driver rework.
The fixes are mainly minor issues reported by coccinelle rather than
real world issues.
Subsystem:
- new VL flag for backup switch over
Drivers:
- ingenic: only support device tree
- pcf2127: report battery switch over, handle nowayout"
* tag 'rtc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
rtc: pcf2127: watchdog: handle nowayout feature
rtc: fsl-ftm-alarm: fix freeze(s2idle) failed to wake
rtc: abx80x: Provide debug feedback for invalid dt properties
rtc: abx80x: Add Device Tree matching table
rtc: rv3028: Add missed check for devm_regmap_init_i2c()
rtc: mpc5121: Use correct return value for mpc5121_rtc_probe()
rtc: goldfish: Use correct return value for goldfish_rtc_probe()
rtc: snvs: Add necessary clock operations for RTC APIs
rtc: snvs: Make SNVS clock always prepared
rtc: ingenic: Reset regulator register in probe
rtc: ingenic: Fix masking of error code
rtc: ingenic: Remove unused fields from private structure
rtc: ingenic: Set wakeup params in probe
rtc: ingenic: Enable clock in probe
rtc: ingenic: Use local 'dev' variable in probe
rtc: ingenic: Only support probing from devicetree
rtc: mc13xxx: fix a double-unlock issue
rtc: stmp3xxx: update contact email
rtc: max77686: Use single-byte writes on MAX77620
rtc: pcf2127: report battery switch over
...
Linus Torvalds [Sun, 7 Jun 2020 23:08:41 +0000 (16:08 -0700)]
Merge tag 'ntb-5.8' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"Intel Icelake NTB support, Intel driver bug fixes, and lots of bug
fixes for ntb tests"
* tag 'ntb-5.8' of git://github.com/jonmason/ntb:
NTB: ntb_test: Fix bug when counting remote files
NTB: perf: Fix race condition when run with ntb_test
NTB: perf: Fix support for hardware that doesn't have port numbers
NTB: perf: Don't require one more memory window than number of peers
NTB: ntb_pingpong: Choose doorbells based on port number
NTB: Fix the default port and peer numbers for legacy drivers
NTB: Revert the change to use the NTB device dev for DMA allocations
NTB: ntb_tool: reading the link file should not end in a NULL byte
ntb_perf: avoid false dma unmap of destination address
ntb_perf: increase sleep time from one milli sec to one sec
ntb_tool: pass correct struct device to dma_alloc_coherent
ntb_perf: pass correct struct device to dma_alloc_coherent
ntb: hw: remove the code that sets the DMA mask
NTB: correct ntb_peer_spad_addr and ntb_peer_spad_read comment typos
ntb: intel: fix static declaration
ntb: intel: add hw workaround for NTB BAR alignment
ntb: intel: Add Icelake (gen4) support for Intel NTB
NTB: Fix static check warning in perf_clear_test
include/ntb: Fix typo in ntb_unregister_device description
Linus Torvalds [Sun, 7 Jun 2020 23:04:49 +0000 (16:04 -0700)]
Merge tag 'apparmor-pr-2020-06-07' of git://git./linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Features:
- Replace zero-length array with flexible-array
- add a valid state flags check
- add consistency check between state and dfa diff encode flags
- add apparmor subdir to proc attr interface
- fail unpack if profile mode is unknown
- add outofband transition and use it in xattr match
- ensure that dfa state tables have entries
Cleanups:
- Use true and false for bool variable
- Remove semicolon
- Clean code by removing redundant instructions
- Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
- remove duplicate check of xattrs on profile attachment
- remove useless aafs_create_symlink
Bug fixes:
- Fix memory leak of profile proxy
- fix introspection of of task mode for unconfined tasks
- fix nnp subset test for unconfined
- check/put label on apparmor_sk_clone_security()"
* tag 'apparmor-pr-2020-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: Fix memory leak of profile proxy
apparmor: fix introspection of of task mode for unconfined tasks
apparmor: check/put label on apparmor_sk_clone_security()
apparmor: Use true and false for bool variable
security/apparmor/label.c: Clean code by removing redundant instructions
apparmor: Replace zero-length array with flexible-array
apparmor: ensure that dfa state tables have entries
apparmor: remove duplicate check of xattrs on profile attachment.
apparmor: add outofband transition and use it in xattr match
apparmor: fail unpack if profile mode is unknown
apparmor: fix nnp subset test for unconfined
apparmor: remove useless aafs_create_symlink
apparmor: add proc subdir to attrs
apparmor: add consistency check between state and dfa diff encode flags
apparmor: add a valid state flags check
AppArmor: Remove semicolon
apparmor: Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
Roberto Sassu [Sun, 7 Jun 2020 21:00:29 +0000 (23:00 +0200)]
ima: Remove __init annotation from ima_pcrread()
Commit
6cc7c266e5b4 ("ima: Call ima_calc_boot_aggregate() in
ima_eventdigest_init()") added a call to ima_calc_boot_aggregate() so that
the digest can be recalculated for the boot_aggregate measurement entry if
the 'd' template field has been requested. For the 'd' field, only SHA1 and
MD5 digests are accepted.
Given that ima_eventdigest_init() does not have the __init annotation, all
functions called should not have it. This patch removes __init from
ima_pcrread().
Cc: stable@vger.kernel.org
Fixes:
6cc7c266e5b4 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Johansen [Sun, 7 Jun 2020 11:10:33 +0000 (04:10 -0700)]
apparmor: Fix memory leak of profile proxy
When the proxy isn't replaced and the profile is removed, the proxy
is being leaked resulting in a kmemleak check message of
unreferenced object 0xffff888077a3a490 (size 16):
comm "apparmor_parser", pid 128041, jiffies
4322684109 (age 1097.028s)
hex dump (first 16 bytes):
03 00 00 00 00 00 00 00 b0 92 fd 4b 81 88 ff ff ...........K....
backtrace:
[<
0000000084d5daf2>] aa_alloc_proxy+0x58/0xe0
[<
00000000ecc0e21a>] aa_alloc_profile+0x159/0x1a0
[<
000000004cc9ce15>] unpack_profile+0x275/0x1c40
[<
000000007332b3ca>] aa_unpack+0x1e7/0x7e0
[<
00000000e25e31bd>] aa_replace_profiles+0x18a/0x1d10
[<
00000000350d9415>] policy_update+0x237/0x650
[<
000000003fbf934e>] profile_load+0x122/0x160
[<
0000000047f7b781>] vfs_write+0x139/0x290
[<
000000008ad12358>] ksys_write+0xcd/0x170
[<
000000001a9daa7b>] do_syscall_64+0x70/0x310
[<
00000000b9efb0cf>] entry_SYSCALL_64_after_hwframe+0x49/0xb3
Make sure to cleanup the profile's embedded label which will result
on the proxy being properly freed.
Fixes:
637f688dc3dc ("apparmor: switch from profiles to using labels on contexts")
Signed-off-by: John Johansen <john.johansen@canonical.com>
John Johansen [Sat, 6 Jun 2020 01:12:21 +0000 (18:12 -0700)]
apparmor: fix introspection of of task mode for unconfined tasks
Fix two issues with introspecting the task mode.
1. If a task is attached to a unconfined profile that is not the
ns->unconfined profile then. Mode the mode is always reported
as -
$ ps -Z
LABEL PID TTY TIME CMD
unconfined 1287 pts/0 00:00:01 bash
test (-) 1892 pts/0 00:00:00 ps
instead of the correct value of (unconfined) as shown below
$ ps -Z
LABEL PID TTY TIME CMD
unconfined 2483 pts/0 00:00:01 bash
test (unconfined) 3591 pts/0 00:00:00 ps
2. if a task is confined by a stack of profiles that are unconfined
the output of label mode is again the incorrect value of (-) like
above, instead of (unconfined). This is because the visibile
profile count increment is skipped by the special casing of
unconfined.
Fixes:
f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Mauricio Faria de Oliveira [Tue, 2 Jun 2020 21:15:16 +0000 (18:15 -0300)]
apparmor: check/put label on apparmor_sk_clone_security()
Currently apparmor_sk_clone_security() does not check for existing
label/peer in the 'new' struct sock; it just overwrites it, if any
(with another reference to the label of the source sock.)
static void apparmor_sk_clone_security(const struct sock *sk,
struct sock *newsk)
{
struct aa_sk_ctx *ctx = SK_CTX(sk);
struct aa_sk_ctx *new = SK_CTX(newsk);
new->label = aa_get_label(ctx->label);
new->peer = aa_get_label(ctx->peer);
}
This might leak label references, which might overflow under load.
Thus, check for and put labels, to prevent such errors.
Note this is similarly done on:
static int apparmor_socket_post_create(struct socket *sock, ...)
...
if (sock->sk) {
struct aa_sk_ctx *ctx = SK_CTX(sock->sk);
aa_put_label(ctx->label);
ctx->label = aa_get_label(label);
}
...
Context:
-------
The label reference count leak is observed if apparmor_sock_graft()
is called previously: this sets the 'ctx->label' field by getting
a reference to the current label (later overwritten, without put.)
static void apparmor_sock_graft(struct sock *sk, ...)
{
struct aa_sk_ctx *ctx = SK_CTX(sk);
if (!ctx->label)
ctx->label = aa_get_current_label();
}
And that is the case on crypto/af_alg.c:af_alg_accept():
int af_alg_accept(struct sock *sk, struct socket *newsock, ...)
...
struct sock *sk2;
...
sk2 = sk_alloc(...);
...
security_sock_graft(sk2, newsock);
security_sk_clone(sk, sk2);
...
Apparently both calls are done on their own right, especially for
other LSMs, being introduced in 2010/2014, before apparmor socket
mediation in 2017 (see commits [1,2,3,4]).
So, it looks OK there! Let's fix the reference leak in apparmor.
Test-case:
---------
Exercise that code path enough to overflow label reference count.
$ cat aa-refcnt-af_alg.c
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <sys/socket.h>
#include <linux/if_alg.h>
int main() {
int sockfd;
struct sockaddr_alg sa;
/* Setup the crypto API socket */
sockfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
if (sockfd < 0) {
perror("socket");
return 1;
}
memset(&sa, 0, sizeof(sa));
sa.salg_family = AF_ALG;
strcpy((char *) sa.salg_type, "rng");
strcpy((char *) sa.salg_name, "stdrng");
if (bind(sockfd, (struct sockaddr *) &sa, sizeof(sa)) < 0) {
perror("bind");
return 1;
}
/* Accept a "connection" and close it; repeat. */
while (!close(accept(sockfd, NULL, 0)));
return 0;
}
$ gcc -o aa-refcnt-af_alg aa-refcnt-af_alg.c
$ ./aa-refcnt-af_alg
<a few hours later>
[ 9928.475953] refcount_t overflow at apparmor_sk_clone_security+0x37/0x70 in aa-refcnt-af_alg[1322], uid/euid: 1000/1000
...
[ 9928.507443] RIP: 0010:apparmor_sk_clone_security+0x37/0x70
...
[ 9928.514286] security_sk_clone+0x33/0x50
[ 9928.514807] af_alg_accept+0x81/0x1c0 [af_alg]
[ 9928.516091] alg_accept+0x15/0x20 [af_alg]
[ 9928.516682] SYSC_accept4+0xff/0x210
[ 9928.519609] SyS_accept+0x10/0x20
[ 9928.520190] do_syscall_64+0x73/0x130
[ 9928.520808] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Note that other messages may be seen, not just overflow, depending on
the value being incremented by kref_get(); on another run:
[ 7273.182666] refcount_t: saturated; leaking memory.
...
[ 7273.185789] refcount_t: underflow; use-after-free.
Kprobes:
-------
Using kprobe events to monitor sk -> sk_security -> label -> count (kref):
Original v5.7 (one reference leak every iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd2
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd3
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd5
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd6
Patched v5.7 (zero reference leak per iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
Commits:
-------
[1] commit
507cad355fc9 ("crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets")
[2] commit
4c63f83c2c2e ("crypto: af_alg - properly label AF_ALG socket")
[3] commit
2acce6aa9f65 ("Networking") a.k.a ("crypto: af_alg - Avoid sock_graft call warning)
[4] commit
56974a6fcfef ("apparmor: add base infastructure for socket mediation")
Fixes:
56974a6fcfef ("apparmor: add base infastructure for socket mediation")
Reported-by: Brian Moyles <bmoyles@netflix.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Linus Torvalds [Sun, 7 Jun 2020 17:59:32 +0000 (10:59 -0700)]
Merge tag 'char-misc-5.8-rc1' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
Linus Torvalds [Sun, 7 Jun 2020 17:53:36 +0000 (10:53 -0700)]
Merge tag 'driver-core-5.8-rc1' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core patches for 5.8-rc1.
Not all that huge this release, just a number of small fixes and
updates:
- software node fixes
- kobject now sends KOBJ_REMOVE when it is removed from sysfs, not
when it is removed from memory (which could come much later)
- device link additions and fixes based on testing on more devices
- firmware core cleanups
- other minor changes, full details in the shortlog
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits)
driver core: Update device link status correctly for SYNC_STATE_ONLY links
firmware_loader: change enum fw_opt to u32
software node: implement software_node_unregister()
kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs
driver core: Remove unnecessary is_fwnode_dev variable in device_add()
drivers property: When no children in primary, try secondary
driver core: platform: Fix spelling errors in platform.c
driver core: Remove check in driver_deferred_probe_force_trigger()
of: platform: Batch fwnode parsing when adding all top level devices
driver core: fw_devlink: Add support for batching fwnode parsing
driver core: Look for waiting consumers only for a fwnode's primary device
driver core: Move code to the right part of the file
Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default""
drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
firmware_loader: move fw_fallback_config to a private kernel symbol namespace
driver core: Add missing '\n' in log messages
driver/base/soc: Use kobj_to_dev() API
Add documentation on meaning of -EPROBE_DEFER
driver core: platform: remove redundant assignment to variable ret
debugfs: Use the correct style for SPDX License Identifier
...
Linus Torvalds [Sun, 7 Jun 2020 17:45:08 +0000 (10:45 -0700)]
Merge tag 'staging-5.8-rc1' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO driver updates from Greg KH:
"Here is the large set of staging and IIO driver changes for 5.8-rc1
Nothing major, but a lot of new IIO drivers are included in here,
along with other core iio cleanups and changes.
On the staging driver front, again, nothing noticable. No new
deletions or additions, just a ton of tiny cleanups all over the tree
done by a lot of different people. Most coding style, but many actual
real fixes and cleanups that are nice to see.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits)
staging: rtl8723bs: Use common packet header constants
staging: sm750fb: Add names to proc_setBLANK args
staging: most: usb: init return value in default path of switch/case expression
staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason
staging: vchiq: move vchiq_release_message() into vchiq
staging: vchi: Get rid of C++ guards
staging: vchi: Get rid of not implemented function declarations
staging: vchi: Get rid of vchiq_status_to_vchi()
staging: vchi: Get rid of vchi_service_set_option()
staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message()
staging: vchiq: Move copy callback handling into vchiq
staging: vchi: Get rid of vchi_queue_user_message()
staging: vchi: Get rid of vchi_service_destroy()
staging: most: usb: use function sysfs_streq
staging: most: usb: add missing put_device calls
staging: most: usb: use correct error codes
staging: most: usb: replace code to calculate array index
staging: most: usb: don't use error path to exit function on success
staging: most: usb: move allocation of URB out of critical section
staging: most: usb: return 0 instead of variable
...
Linus Torvalds [Sun, 7 Jun 2020 16:52:36 +0000 (09:52 -0700)]
Merge tag 'tty-5.8-rc1' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
All of these have been in linux-next with no issues for a while"
* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
tty: serial: imx: clear Ageing Timer Interrupt in handler
serial: 8250_fintek: Add F81966 Support
sc16is7xx: Add flag to activate IrDA mode
dt-bindings: sc16is7xx: Add flag to activate IrDA mode
serial: 8250: Support rs485 bus termination GPIO
serial: 8520_port: Fix function param documentation
dt-bindings: serial: Add binding for rs485 bus termination GPIO
vt: keyboard: avoid signed integer overflow in k_ascii
serial: 8250: Enable 16550A variants by default on non-x86
tty: hvc_console, fix crashes on parallel open/close
serial: imx: Initialize lock for non-registered console
sc16is7xx: Read the LSR register for basic device presence check
sc16is7xx: Allow sharing the IRQ line
sc16is7xx: Use threaded IRQ
sc16is7xx: Always use falling edge IRQ
tty: n_gsm: Fix bogus i++ in gsm_data_kick
tty: n_gsm: Remove unnecessary test in gsm_print_packet()
serial: stm32: add no_console_suspend support
tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
...
Linus Torvalds [Sun, 7 Jun 2020 16:42:16 +0000 (09:42 -0700)]
Merge tag 'usb-5.8-rc1' of git://git./linux/kernel/git/gregkh/usb
Pull USB/PHY driver updates from Greg KH:
"Here are the large set of USB and PHY driver updates for 5.8-rc1.
Nothing huge, just lots of little things:
- USB gadget fixes and additions all over the place
- new PHY drivers
- PHY driver fixes and updates
- XHCI driver updates
- musb driver updates
- more USB-serial driver ids added
- various USB quirks added
- thunderbolt minor updates and fixes
- typec updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
USB: serial: ch341: fix lockup of devices with limited prescaler
USB: serial: ch341: add basis for quirk detection
CDC-ACM: heed quirk also in error handling
USB: serial: option: add Telit LE910C1-EUX compositions
usb: musb: Fix runtime PM imbalance on error
usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
usb: musb: use true for 'use_dma'
usb: musb: start session in resume for host port
usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
USB: serial: qcserial: add DW5816e QDL support
thunderbolt: Add trivial .shutdown
usb: dwc3: keystone: Turn on USB3 PHY before controller
dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
dt-bindings: usb: convert keystone-usb.txt to YAML
...
Al Viro [Sun, 7 Jun 2020 03:44:24 +0000 (23:44 -0400)]
fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()"
lost npc in PTRACE_SETREGSET, breaking PTRACE_SETREGS as well
Fixes:
cf51e129b968 "sparc32: fix register window handling in genregs32_[gs]et()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dan Murphy [Fri, 5 Jun 2020 20:51:03 +0000 (15:51 -0500)]
net: dp83869: Reset return variable if PHY strap is read
When the PHY's strap register is read to determine if lane swapping is
needed the phy_read_mmd returns the value back into the ret variable.
If the call to read the strap fails the failed value is returned. If
the call to read the strap is successful then ret is possibly set to a
non-zero positive number. Without reseting the ret value to 0 this will
cause the parse DT function to return a failure.
Fixes:
c4566aec6e808 ("net: phy: dp83869: Update port-mirroring to read straps")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 3 Jun 2020 08:12:43 +0000 (18:12 +1000)]
rhashtable: Drop raw RCU deref in nested_table_free
This patch replaces some unnecessary uses of rcu_dereference_raw
in the rhashtable code with rcu_dereference_protected.
The top-level nested table entry is only marked as RCU because it
shares the same type as the tree entries underneath it. So it
doesn't need any RCU protection.
We also don't need RCU protection when we're freeing a nested RCU
table because by this stage we've long passed a memory barrier
when anyone could change the nested table.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 6 Jun 2020 22:22:01 +0000 (15:22 -0700)]
Merge tag 'sh-for-5.8' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Fix for arch/sh build regression with newer binutils, removal of SH5,
fixes for module exports, and misc cleanup"
* tag 'sh-for-5.8' of git://git.libc.org/linux-sh:
sh: remove sh5 support
sh: add missing EXPORT_SYMBOL() for __delay
sh: Convert ins[bwl]/outs[bwl] macros to inline functions
sh: Convert iounmap() macros to inline functions
sh: Add missing DECLARE_EXPORT() for __ashiftrt_r4_xx
sh: configs: Cleanup old Kconfig IO scheduler options
arch/sh: vmlinux.scr
sh: Replace CONFIG_MTD_M25P80 with CONFIG_MTD_SPI_NOR in sh7757lcr_defconfig
sh: sh4a: Bring back tmu3_device early device
Linus Torvalds [Sat, 6 Jun 2020 19:07:28 +0000 (12:07 -0700)]
Merge tag 'kconfig-v5.8' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- allow only 'config', 'comment', 'if' statements inside 'choice' since
the other statements are not sensible inside 'choice' and should be
grammatical error
- support LMC_KEEP env variable for 'make local{yes,mod}config' to
preserve some CONFIG options
- deprecate 'make kvmconfig' and 'make xenconfig' in favor of
'make kvm_guest.config' and 'make xen.config'
- code cleanups
* tag 'kconfig-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: announce removal of 'kvmconfig' and 'xenconfig' shorthands
streamline_config.pl: add LMC_KEEP to preserve some kconfigs
kconfig: allow only 'config', 'comment', and 'if' inside 'choice'
kconfig: tests: remove randconfig test for choice in choice
kconfig: do not assign a variable in the return statement
kconfig: do not use OR-assignment for zero-cleared structure
Linus Torvalds [Sat, 6 Jun 2020 19:00:25 +0000 (12:00 -0700)]
Merge tag 'kbuild-v5.8' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is
updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when
CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
kbuild: add variables for compression tools
Makefile: install modules.builtin even if CONFIG_MODULES=n
mksysmap: Fix the mismatch of '.L' symbols in System.map
kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
modpost: change elf_info->size to size_t
modpost: remove is_vmlinux() helper
modpost: strip .o from modname before calling new_module()
modpost: set have_vmlinux in new_module()
modpost: remove mod->skip struct member
modpost: add mod->is_vmlinux struct member
modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
modpost: remove mod->is_dot_o struct member
modpost: move -d option in scripts/Makefile.modpost
modpost: remove -s option
modpost: remove get_next_text() and make {grab,release_}file static
modpost: use read_text_file() and get_line() for reading text files
modpost: avoid false-positive file open error
modpost: fix potential mmap'ed file overrun in get_src_version()
modpost: add read_text_file() and get_line() helpers
modpost: do not call get_modinfo() for vmlinux(.o)
...
Linus Torvalds [Sat, 6 Jun 2020 18:55:53 +0000 (11:55 -0700)]
Merge tag 'dma-mapping-5.8-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping helpers from Christoph Hellwig:
"These were in a separate stable branch so that various media and drm
trees could pull the in for bug fixes, but looking at linux-next that
hasn't actually happened yet. Still sending the APIs to you in the
hope that these bug fixes get picked up for 5.8 in one way or another.
Summary:
- add DMA mapping helpers for struct sg_table (Marek Szyprowski)"
* tag 'dma-mapping-5.8-2' of git://git.infradead.org/users/hch/dma-mapping:
iommu: add generic helper for mapping sgtable objects
scatterlist: add generic wrappers for iterating over sgtable objects
dma-mapping: add generic helpers for mapping sgtable objects
Linus Torvalds [Sat, 6 Jun 2020 18:43:23 +0000 (11:43 -0700)]
Merge tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- enhance the dma pool to allow atomic allocation on x86 with AMD SEV
(David Rientjes)
- two small cleanups (Jason Yan and Peter Collingbourne)
* tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: fix comment for dma_release_from_contiguous
dma-pool: scale the default DMA coherent pool size with memory capacity
x86/mm: unencrypted non-blocking DMA allocations use coherent pools
dma-pool: add pool sizes to debugfs
dma-direct: atomic allocations must come from atomic coherent pools
dma-pool: dynamically expanding atomic pools
dma-pool: add additional coherent pools to map to gfp mask
dma-remap: separate DMA atomic pools from direct remap code
dma-debug: make __dma_entry_alloc_check_leak() static
Linus Torvalds [Sat, 6 Jun 2020 18:30:00 +0000 (11:30 -0700)]
Merge branch 'dmi-for-linus' of git://git./linux/kernel/git/jdelvare/staging
Pull dmi update from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware/dmi: Report DMI Bios & EC firmware release
Linus Torvalds [Sat, 6 Jun 2020 18:01:58 +0000 (11:01 -0700)]
Merge tag 'pci-v5.8-changes' of git://git./linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Program MPS for RCiEP devices (Ashok Raj)
- Fix pci_register_host_bridge() device_register() error handling
(Rob Herring)
- Fix pci_host_bridge struct device release/free handling (Rob
Herring)
Resource management:
- Allow resizing BARs for devices on root bus (Ard Biesheuvel)
Power management:
- Reduce Thunderbolt resume time by working around devices that don't
support DLL Link Active reporting (Mika Westerberg)
- Work around a Pericom USB controller OHCI/EHCI PME# defect
(Kai-Heng Feng)
Virtualization:
- Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok
Raj)
- Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)
- Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)
Error handling:
- Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
(Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)
- Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER
events (Kuppuswamy Sathyanarayanan)
- Don't enable AER by default in Kconfig (Bjorn Helgaas)
Peer-to-peer DMA:
- Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)
ASPM:
- Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)
Endpoint framework:
- Fix DMA channel release in test (Kunihiko Hayashi)
- Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)
- Add support to handle multiple base for mapping outbound memory
(Lad Prabhakar)
Generic host bridge driver:
- Support building as module (Rob Herring)
- Eliminate pci_host_common_probe wrappers (Rob Herring)
Amlogic Meson PCIe controller driver:
- Don't use FAST_LINK_MODE to set up link (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)
- Fix clk_put() error (Jim Quinlan)
- Fix window register offset (Jim Quinlan)
- Assert fundamental reset on initialization (Nicolas Saenz Julienne)
- Add notify xHCI reset property (Nicolas Saenz Julienne)
- Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas
Saenz Julienne)
- Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
Saenz Julienne)
Cadence PCIe controller driver:
- Remove "cdns,max-outbound-regions" DT property (replaced by
"ranges") (Kishon Vijay Abraham I)
- Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT
(Kishon Vijay Abraham I)
Marvell Aardvark PCIe controller driver:
- Improve link training (Marek Behún)
- Add PHY support (Marek Behún)
- Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
Behún)
- Train link immediately after enabling training to work around
detection issues with some cards (Pali Rohár)
- Issue PERST via GPIO to work around detection issues (Pali Rohár)
- Don't blindly enable ASPM L0s (Pali Rohár)
- Replace custom macros by standard linux/pci_regs.h macros (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix probe failure path to release resource (Wei Hu)
- Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)
Renesas R-Car PCIe controller driver:
- Fix incorrect programming of OB windows (Andrew Murray)
- Add suspend/resume (Kazufumi Ikeda)
- Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)
- Add endpoint controller driver (Lad Prabhakar)
- Fix PCIEPAMR mask calculation (Lad Prabhakar)
- Add r8a77961 to DT binding (Yoshihiro Shimoda)
Socionext UniPhier Pro5 controller driver:
- Add endpoint controller driver (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Program outbound ATU upper limit register (Alan Mikhak)
- Fix inner MSI IRQ domain registration (Marc Zyngier)
Miscellaneous:
- Check for platform_get_irq() failure consistently (negative return
means failure) (Aman Sharma)
- Fix several runtime PM get/put imbalances (Dinghao Liu)
- Use flexible-array and struct_size() helpers for code cleanup
(Gustavo A. R. Silva)
- Update & fix issues in bridge emulation of PCIe registers (Jon
Derrick)
- Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
(Krzysztof Wilczyński)
- Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)"
* tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
PCI/DPC: Print IRQ number used by port
PCI/AER: Use "aer" variable for capability offset
PCI/AER: Remove redundant dev->aer_cap checks
PCI/AER: Remove redundant pci_is_pcie() checks
PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
PCI: tegra: Fix runtime PM imbalance on error
PCI: vmd: Filter resource type bits from shadow register
PCI: tegra194: Fix runtime PM imbalance on error
dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
PCI: hv: Use struct_size() helper
PCI: Rename _DSM constants to align with spec
PCI: Avoid FLR for AMD Starship USB 3.0
PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
PCI: dwc: Fix inner MSI IRQ domain registration
PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
...
Zou Wei [Sat, 6 Jun 2020 16:57:41 +0000 (18:57 +0200)]
hpfs: fix warning due to superfluous semicolon
Fixes coccicheck warning:
fs/hpfs/buffer.c:56:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Mikulas Patocka <mikulas@twibright.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 6 Jun 2020 17:01:48 +0000 (10:01 -0700)]
Merge branch 'for-5.8' of git://git./linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
"Mostly cleanups and other trivial changes.
The only interesting change is Sebastian's rcuwait conversion for RT"
* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: use BUILD_BUG_ON() for compile time test instead of WARN_ON()
workqueue: fix a piece of comment about reserved bits for work flags
workqueue: remove useless unlock() and lock() in series
workqueue: void unneeded requeuing the pwq in rescuer thread
workqueue: Convert the pool::lock and wq_mayday_lock to raw_spinlock_t
workqueue: Use rcuwait for wq_manager_wait
workqueue: Remove unnecessary kfree() call in rcu_free_wq()
workqueue: Fix an use after free in init_rescuer()
workqueue: Use IS_ERR and PTR_ERR instead of PTR_ERR_OR_ZERO.
Linus Torvalds [Sat, 6 Jun 2020 16:59:34 +0000 (09:59 -0700)]
Merge branch 'for-5.8' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Just two patches: one to add system-level cpu.stat to the root cgroup
for convenience and a trivial comment update"
* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: add cpu.stat file to root cgroup
cgroup: Remove stale comments
Linus Torvalds [Sat, 6 Jun 2020 16:39:05 +0000 (09:39 -0700)]
Merge tag 'integrity-v5.8' of git://git./linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"The main changes are extending the TPM 2.0 PCR banks with bank
specific file hashes, calculating the "boot_aggregate" based on other
TPM PCR banks, using the default IMA hash algorithm, instead of SHA1,
as the basis for the cache hash table key, and preventing the mprotect
syscall to circumvent an IMA mmap appraise policy rule.
- In preparation for extending TPM 2.0 PCR banks with bank specific
digests, commit
0b6cf6b97b7e ("tpm: pass an array of
tpm_extend_digest structures to tpm_pcr_extend()") modified
tpm_pcr_extend(). The original SHA1 file digests were
padded/truncated, before being extended into the other TPM PCR
banks. This pull request calculates and extends the TPM PCR banks
with bank specific file hashes completing the above change.
- The "boot_aggregate", the first IMA measurement list record, is the
"trusted boot" link between the pre-boot environment and the
running OS. With TPM 2.0, the "boot_aggregate" record is not
limited to being based on the SHA1 TPM PCR bank, but can be
calculated based on any enabled bank, assuming the hash algorithm
is also enabled in the kernel.
Other changes include the following and five other bug fixes/code
clean up:
- supporting both a SHA1 and a larger "boot_aggregate" digest in a
custom template format containing both the the SHA1 ('d') and
larger digests ('d-ng') fields.
- Initial hash table key fix, but additional changes would be good"
* tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Directly free *entry in ima_alloc_init_template() if digests is NULL
ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()
ima: Directly assign the ima_default_policy pointer to ima_rules
ima: verify mprotect change is consistent with mmap policy
evm: Fix possible memory leak in evm_calc_hmac_or_hash()
ima: Set again build_ima_appraise variable
ima: Remove redundant policy rule set in add_rules()
ima: Fix ima digest hash table key calculation
ima: Use ima_hash_algo for collision detection in the measurement list
ima: Calculate and extend PCR with digests in ima_template_entry
ima: Allocate and initialize tfm for each PCR bank
ima: Switch to dynamically allocated buffer for template digests
ima: Store template digest directly in ima_template_entry
ima: Evaluate error in init_ima()
ima: Switch to ima_hash_algo for boot aggregate
Denis Efremov [Fri, 5 Jun 2020 07:39:55 +0000 (10:39 +0300)]
kbuild: add variables for compression tools
Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2
Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.
The credit goes to @grsecurity.
As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Jonas Zeiger [Wed, 3 Jun 2020 13:34:05 +0000 (15:34 +0200)]
Makefile: install modules.builtin even if CONFIG_MODULES=n
Many applications check for available kernel features via:
- /proc/modules (loaded modules, present if CONFIG_MODULES=y)
- $(MODLIB)/modules.builtin (builtin modules)
They fail to detect features if the kernel was built with CONFIG_MODULES=n
and modules.builtin isn't installed.
Therefore, add the target "_builtin_inst_" and make "install" and
"modules_install" depend on it.
Tests results:
- make install: kernel image is copied as before, modules.builtin copied
- make modules_install: (CONFIG_MODULES=n) nothing is copied, exit 1
Signed-off-by: Jonas Zeiger <jonas.zeiger@talpidae.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ashimida [Tue, 2 Jun 2020 07:45:17 +0000 (15:45 +0800)]
mksysmap: Fix the mismatch of '.L' symbols in System.map
When System.map was generated, the kernel used mksysmap to
filter the kernel symbols, but all the symbols with the
second letter 'L' in the kernel were filtered out, not just
the symbols starting with 'dot + L'.
For example:
ashimida@ubuntu:~/linux$ cat System.map |grep ' .L'
ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L'
ffff0000088028e0 t bLength_show
......
ffff0000092e0408 b PLLP_OUTC_lock
ffff0000092e0410 b PLLP_OUTA_lock
The original intent should be to filter out all local symbols
starting with '.L', so the dot should be escaped.
Fixes:
00902e984732 ("mksysmap: Add h8300 local symbol pattern")
Signed-off-by: ashimida <ashimida@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 17:03:28 +0000 (02:03 +0900)]
kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
Commit
d503ac531a52 ("kbuild: rename LDFLAGS to KBUILD_LDFLAGS") missed
to update the documentation.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:31 +0000 (14:57 +0900)]
modpost: change elf_info->size to size_t
Align with the mmap / munmap APIs.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:30 +0000 (14:57 +0900)]
modpost: remove is_vmlinux() helper
Now that is_vmlinux() is called only in new_module(), we can inline
the function call.
modname is the basename with '.o' is stripped. No need to compare it
with 'vmlinux.o'.
vmlinux is always located at the current working directory. No need
to strip the directory path.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:29 +0000 (14:57 +0900)]
modpost: strip .o from modname before calling new_module()
new_module() conditionally strips the .o because the modname has .o
suffix when it is called from read_symbols(), but no .o when it is
called from read_dump().
It is clearer to strip .o in read_symbols().
I also used flexible-array for mod->name.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:28 +0000 (14:57 +0900)]
modpost: set have_vmlinux in new_module()
Set have_vmlinux flag in a single place.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:27 +0000 (14:57 +0900)]
modpost: remove mod->skip struct member
The meaning of 'skip' is obscure since it does not explain
"what to skip".
mod->skip is set when it is vmlinux or the module info came from
a dump file.
So, mod->skip is equivalent to (mod->is_vmlinux || mod->from_dump).
For the check in write_namespace_deps_files(), mod->is_vmlinux is
unneeded because the -d option is not passed in the first pass of
modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:26 +0000 (14:57 +0900)]
modpost: add mod->is_vmlinux struct member
is_vmlinux() is called in several places to check whether the current
module is vmlinux or not.
It is faster and clearer to check mod->is_vmlinux flag.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:25 +0000 (14:57 +0900)]
modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
check_exports() is never called for vmlinux because mod->skip is set
for vmlinux.
Hence, check_for_gpl_usage() and check_for_unused() are not called
for vmlinux, either. is_vmlinux() is always false here.
Remove the is_vmlinux() calls, and hard-code the ".ko" suffix.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:24 +0000 (14:57 +0900)]
modpost: remove mod->is_dot_o struct member
Previously, there were two cases where mod->is_dot_o is unset:
[1] the executable 'vmlinux' in the second pass of modpost
[2] modules loaded by read_dump()
I think [1] was intended usage to distinguish 'vmlinux.o' and 'vmlinux'.
Now that modpost does not parse the executable 'vmlinux', this case
does not happen.
[2] is obscure, maybe a bug. Module.symver stores module paths without
extension. So, none of modules loaded by read_dump() has the .o suffix,
and new_module() unsets ->is_dot_o. Anyway, it is not a big deal because
handle_symbol() is not called for the case.
To sum up, all the parsed ELF files are .o files.
mod->is_dot_o is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:23 +0000 (14:57 +0900)]
modpost: move -d option in scripts/Makefile.modpost
Collect options for modules into a single place.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:22 +0000 (14:57 +0900)]
modpost: remove -s option
The -s option was added by commit
8d8d8289df65 ("kbuild: do not do
section mismatch checks on vmlinux in 2nd pass").
Now that the second pass does not parse vmlinux, this option is
unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:21 +0000 (14:57 +0900)]
modpost: remove get_next_text() and make {grab,release_}file static
get_next_line() is no longer used. Remove.
grab_file() and release_file() are only used in modpost.c. Make them
static.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:20 +0000 (14:57 +0900)]
modpost: use read_text_file() and get_line() for reading text files
grab_file() mmaps a file, but it is not so efficient here because
get_next_line() copies every line to the temporary buffer anyway.
read_text_file() and get_line() are simpler. get_line() exploits the
library function strchr().
Going forward, the missing *.symvers or *.cmd is a fatal error.
This should not happen because scripts/Makefile.modpost guards the
-i option files with $(wildcard $(input-symdump)).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:19 +0000 (14:57 +0900)]
modpost: avoid false-positive file open error
One problem of grab_file() is that it cannot distinguish the following
two cases:
- It cannot read the file (the file does not exist, or read permission
is not set)
- It can read the file, but the file size is zero
This is because grab_file() calls mmap(), which requires the mapped
length is greater than 0. Hence, grab_file() fails for both cases.
If an empty header file were included for checksum calculation, the
following warning would be printed:
WARNING: modpost: could not open ...: Invalid argument
An empty file is a valid source file, so it should not fail.
Use read_text_file() instead. It can read a zero-length file.
Then, parse_file() will succeed with doing nothing.
Going forward, the first case (it cannot read the file) is a fatal
error. If the source file from which an object was compiled is missing,
something went wrong.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:18 +0000 (14:57 +0900)]
modpost: fix potential mmap'ed file overrun in get_src_version()
I do not know how reliably this function works, but it looks dangerous
to me.
strchr(sources, '\n');
... continues searching until it finds '\n' or it reaches the '\0'
terminator. In other words, 'sources' should be a null-terminated
string.
However, grab_file() just mmaps a file, so 'sources' is not terminated
with null byte. If the file does not contain '\n' at all, strchr() will
go beyond the mmap'ed memory.
Use read_text_file(), which loads the file content into a malloc'ed
buffer, appending null byte.
Here we are interested only in the first line of *.mod files. Use
get_line() helper to get the first line.
This also makes missing *.mod file a fatal error.
Commit
4be40e22233c ("kbuild: do not emit src version warning for
non-modules") ignored missing *.mod files.
I do not fully understand what that commit addressed, but commit
91341d4b2c19 ("kbuild: introduce new option to enhance section mismatch
analysis") introduced partial section checks by using modpost. built-in.o
was parsed by modpost. Even modules had a problem because *.mod files
were created after the modpost check.
Commit
b7dca6dd1e59 ("kbuild: create *.mod with full directory path and
remove MODVERDIR") stopped doing that. Now that modpost is only invoked
after the directory descend, *.mod files should always exist at the
modpost stage.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:17 +0000 (14:57 +0900)]
modpost: add read_text_file() and get_line() helpers
modpost uses grab_file() to open a file, but it is not suitable for
a text file because the mmap'ed file is not terminated by null byte.
Actually, I see some issues for the use of grab_file().
The new helper, read_text_file() loads the whole file content into a
malloc'ed buffer, and appends a null byte. Then, get_line() reads
each line.
To handle text files, I intend to replace as follows:
grab_file() -> read_text_file()
get_new_line() -> get_line()
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:16 +0000 (14:57 +0900)]
modpost: do not call get_modinfo() for vmlinux(.o)
The three calls of get_modinfo() ("license", "import_ns", "version")
always return NULL for vmlinux(.o) because the built-in module info is
prefixed with __MODULE_INFO_PREFIX.
It is harmless to call get_modinfo(), but there is no point to search
for what apparently does not exist.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:15 +0000 (14:57 +0900)]
modpost: drop RCS/CVS $Revision handling in MODULE_VERSION()
As far as I understood, this code gets rid of '$Revision$' or '$Revision:'
of CVS, RCS or whatever in MODULE_VERSION() tags.
Remove the primeval code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:14 +0000 (14:57 +0900)]
modpost: show warning if any of symbol dump files is missing
If modpost fails to load a symbol dump file, it cannot check unresolved
symbols, hence module dependency will not be added. Nor CRCs can be added.
Currently, external module builds check only $(objtree)/Module.symvers,
but it should check files specified by KBUILD_EXTRA_SYMBOLS as well.
Move the warning message from the top Makefile to scripts/Makefile.modpost
and print the warning if any dump file is missing.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:13 +0000 (14:57 +0900)]
modpost: show warning if vmlinux is not found when processing modules
check_exports() does not print warnings about unresolved symbols if
vmlinux is missing because there would be too many.
This situation happens when you do 'make modules' from the clean
tree, or compile external modules against a kernel tree that has
not been completely built.
It is dangerous to not check unresolved symbols because you might be
building useless modules. At least it should be warned.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:12 +0000 (14:57 +0900)]
modpost: invoke modpost only when input files are updated
Currently, the second pass of modpost is always invoked when you run
'make' or 'make modules' even if none of modules is changed.
Use if_changed to invoke it only when it is necessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:11 +0000 (14:57 +0900)]
modpost: generate vmlinux.symvers and reuse it for the second modpost
The full build runs modpost twice, first for vmlinux.o and second for
modules.
The first pass dumps all the vmlinux symbols into Module.symvers, but
the second pass parses vmlinux again instead of reusing the dump file,
presumably because it needs to avoid accumulating stale symbols.
Loading symbol info from a dump file is faster than parsing an ELF object.
Besides, modpost deals with various issues to parse vmlinux in the second
pass.
A solution is to make the first pass dumps symbols into a separate file,
vmlinux.symvers. The second pass reads it, and parses module .o files.
The merged symbol information is dumped into Module.symvers in the same
way as before.
This makes further modpost cleanups possible.
Also, it fixes the problem of 'make vmlinux', which previously overwrote
Module.symvers, throwing away module symbols.
I slightly touched scripts/link-vmlinux.sh so that vmlinux is re-linked
when you cross this commit. Otherwise, vmlinux.symvers would not be
generated.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:10 +0000 (14:57 +0900)]
modpost: refactor -i option calculation
Prepare to use -i for in-tree modpost as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:09 +0000 (14:57 +0900)]
modpost: print symbol dump file as the build target in short log
The symbol dump *.symvers is the output of modpost. Print it in
the short log.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:08 +0000 (14:57 +0900)]
modpost: re-add -e to set external_module flag
Previously, the -i option had two functions; load a symbol dump file,
and set the external_module flag.
I want to assign a dedicate option for each of them.
Going forward, the -i is used to load a symbol dump file, and the -e
to set the external_module flag.
With this, we will be able to use -i for loading in-kernel symbols.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:07 +0000 (14:57 +0900)]
modpost: rename ext_sym_list to dump_list
The -i option is used to include Modules.symver as well as files from
$(KBUILD_EXTRA_SYMBOLS).
Make the struct and variable names more generic.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:06 +0000 (14:57 +0900)]
modpost: allow to pass -i option multiple times to remove -e option
Now that there is no difference between -i and -e, they can be unified.
Make modpost accept the -i option multiple times, then remove -e.
I will reuse -e for a different purpose.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 1 Jun 2020 05:57:05 +0000 (14:57 +0900)]
modpost: track if the symbol origin is a dump file or ELF object
The meaning of sym->kernel is obscure; it is set for in-kernel symbols
loaded from Modules.symvers. This happens only when we are building
external modules, and it is used to determine whether to dump symbols
to $(KBUILD_EXTMOD)/Modules.symvers
It is clearer to remember whether the symbol or module came from a dump
file or ELF object.
This changes the KBUILD_EXTRA_SYMBOLS behavior. Previously, symbols
loaded from KBUILD_EXTRA_SYMBOLS are accumulated into the current
$(KBUILD_EXTMOD)/Modules.symvers
Going forward, they will be only used to check symbol references, but
not dumped into the current $(KBUILD_EXTMOD)/Modules.symvers. I believe
this makes more sense.
sym->vmlinux will have no user. Remove it too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Erwan Velu [Sat, 6 Jun 2020 09:35:50 +0000 (11:35 +0200)]
firmware/dmi: Report DMI Bios & EC firmware release
Some vendors like HPe or Dell, encode the release version of their BIOS
in the "System BIOS {Major|Minor} Release" fields of Type 0.
This information is used to know which bios release actually runs.
It could be used for some quirks, debugging sessions or inventory tasks.
A typical output for a Dell system running the 65.27 bios is :
[root@t1700 ~]# cat /sys/devices/virtual/dmi/id/bios_release
65.27
[root@t1700 ~]#
Servers that have a BMC encode the release version of their firmware in the
"Embedded Controller Firmware {Major|Minor} Release" fields of Type 0.
This information is used to know which BMC release actually runs.
It could be used for some quirks, debugging sessions or inventory tasks.
A typical output for a Dell system running the 3.75 bmc release is :
[root@t1700 ~]# cat /sys/devices/virtual/dmi/id/ec_firmware_release
3.75
[root@t1700 ~]#
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Logan Gunthorpe [Wed, 9 Jan 2019 19:22:33 +0000 (12:22 -0700)]
NTB: ntb_test: Fix bug when counting remote files
When remote files are counted in get_files_count, without using SSH,
the code returns 0 because there is a colon prepended to $LOC. $VPATH
should have been used instead of $LOC.
Fixes:
06bd0407d06c ("NTB: ntb_test: Update ntb_tool Scratchpad tests")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Logan Gunthorpe [Wed, 9 Jan 2019 19:22:32 +0000 (12:22 -0700)]
NTB: perf: Fix race condition when run with ntb_test
When running ntb_test, the script tries to run the ntb_perf test
immediately after probing the modules. Since adding multi-port support,
this fails seeing the new initialization procedure in ntb_perf
can not complete instantly.
To fix this we add a completion which is waited on when a test is
started. In this way, run can be written any time after the module is
loaded and it will wait for the initialization to complete instead of
sending an error.
Fixes:
5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Logan Gunthorpe [Wed, 9 Jan 2019 19:22:31 +0000 (12:22 -0700)]
NTB: perf: Fix support for hardware that doesn't have port numbers
Legacy drivers do not have port numbers (but is reliably only two ports)
and was broken by the recent commit that added mult-port support to
ntb_perf. This is especially important to support the cross link
topology which is perfectly symmetric and cannot assign unique port
numbers easily.
Hardware that returns zero for both the local port and the peer should
just always use gidx=0 for the only peer.
Fixes:
5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>