git.osdn.net Git - tomoyo/tomoyo-test1.git/log

drm/i915: Extend hotplug detect retry on TypeC connectors to 5 seconds

On TypeC ports if a sink deasserts/reasserts its HPD signal, generating
a hotplug interrupt without the sink getting unplugged/replugged from
the connector, there can be an up to 3 seconds delay until the AUX
channel gets functional. To avoid detection failures this delay causes
retry the detection for 5 seconds.

I noticed this on ICL/TGL RVPs and a DELL XPS 13 7390 ICL laptop.

References: https://gitlab.freedesktop.org/drm/intel/issues/1067
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330095425.29113-2-imre.deak@intel.com

drm/i915: Add a retry counter for hotplug detect retries

On TypeC connectors we need to retry the detection after hotplug events
for a longer time, so add a retry counter to support this. The next
patch will add detection retries on TypeC ports needing this.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330095425.29113-1-imre.deak@intel.com

drm/i915/gt: Free request pool from virtual engines

While extremely unlikely to be populated, we could capture a request on
the virtual engine which we should free along with the virtual engine.

Fixes: 43acd6516ca9 ("drm/i915: Keep a per-engine request pool")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403203303.10903-1-chris@chris-wilson.co.uk

drm/i915/selftests: Wait until we start timeslicing after a submit

If we submit, we do not start timeslicing until we process the CS event
that marks the start of the context running on HW. So in the selftest,
be sure to wait until we have processed the pending events before
asserting that timeslicing has begun.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403190209.21818-1-chris@chris-wilson.co.uk

drm/i915: Check current i915_vma.pin_count status first on unbind

Do an early rejection of a i915_vma_unbind() attempt if the i915_vma is
currently pinned, without waiting to see if the inflight operations may
unpin it. We see this problem with the shrinker trying to unbind the
active vma from inside its bind worker:

<6> [472.618968] Workqueue: events_unbound fence_work [i915]
<4> [472.618970] Call Trace:
<4> [472.618974]  ? __schedule+0x2e5/0x810
<4> [472.618978]  schedule+0x37/0xe0
<4> [472.618982]  schedule_preempt_disabled+0xf/0x20
<4> [472.618984]  __mutex_lock+0x281/0x9c0
<4> [472.618987]  ? mark_held_locks+0x49/0x70
<4> [472.618989]  ? _raw_spin_unlock_irqrestore+0x47/0x60
<4> [472.619038]  ? i915_vma_unbind+0xae/0x110 [i915]
<4> [472.619084]  ? i915_vma_unbind+0xae/0x110 [i915]
<4> [472.619122]  i915_vma_unbind+0xae/0x110 [i915]
<4> [472.619165]  i915_gem_object_unbind+0x1dc/0x400 [i915]
<4> [472.619208]  i915_gem_shrink+0x328/0x660 [i915]
<4> [472.619250]  ? i915_gem_shrink_all+0x38/0x60 [i915]
<4> [472.619282]  i915_gem_shrink_all+0x38/0x60 [i915]
<4> [472.619325]  vm_alloc_page.constprop.25+0x1aa/0x240 [i915]
<4> [472.619330]  ? rcu_read_lock_sched_held+0x4d/0x80
<4> [472.619363]  ? __alloc_pd+0xb/0x30 [i915]
<4> [472.619366]  ? module_assert_mutex_or_preempt+0xf/0x30
<4> [472.619368]  ? __module_address+0x23/0xe0
<4> [472.619371]  ? is_module_address+0x26/0x40
<4> [472.619374]  ? static_obj+0x34/0x50
<4> [472.619376]  ? lockdep_init_map+0x4d/0x1e0
<4> [472.619407]  setup_page_dma+0xd/0x90 [i915]
<4> [472.619437]  alloc_pd+0x29/0x50 [i915]
<4> [472.619470]  __gen8_ppgtt_alloc+0x443/0x6b0 [i915]
<4> [472.619503]  gen8_ppgtt_alloc+0xd7/0x300 [i915]
<4> [472.619535]  ppgtt_bind_vma+0x2a/0xe0 [i915]
<4> [472.619577]  __vma_bind+0x26/0x40 [i915]
<4> [472.619611]  fence_work+0x1c/0x90 [i915]
<4> [472.619617]  process_one_work+0x26a/0x620

Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403120150.17091-1-chris@chris-wilson.co.uk

drm/i915/perf: Do not clear pollin for small user read buffers

It is wrong to block the user thread in the next poll when OA data is
already available which could not fit in the user buffer provided in
the previous read. In several cases the exact user buffer size is not
known. Blocking user space in poll can lead to data loss when the
buffer size used is smaller than the available data.

This change fixes this issue and allows user space to read all OA data
even when using a buffer size smaller than the available data using
multiple non-blocking reads rather than staying blocked in poll till
the next timer interrupt.

v2: Fix ret value for blocking reads (Umesh)
v3: Mistake during patch send (Ashutosh)
v4: Remove -EAGAIN from comment (Umesh)
v5: Improve condition for clearing pollin and return (Lionel)
v6: Improve blocking read loop and other cleanups (Lionel)
v7: Added Cc stable

Testcase: igt/perf/polling-small-buf
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403010120.3067-1-ashutosh.dixit@intel.com

drm/i915: Revoke mmap before fence

Make sure we revoke the user's mmaps of this vma to force them to take a
pagefault *before* we remove the associated aperture detiling register.

Fixes: 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403160951.8271-1-chris@chris-wilson.co.uk

drm/i915: Move the port sync DP_TP_CTL stuff to the encoder hook

Move the final DP_TP_CTL frobbing of port sync to the master
encoder's enable hook. Now neatly out of sight from the high level
modeset code.

And thus we've eliminated all the special casing of port sync
in the high level modeset code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-14-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Pass atomic state to encoder hooks

We're going to want access to the atomic state for iterating
the slave crtcs when enabling the port sync master crtc. Pass
the atomic state all the way down.

The alternative would be yet another encoder hook which we'll
have to call after all the normal modeset stuff is done. Not
really a fan of yet another hook just for this.

Note that during readout state sanitation we are now going
to pass NULL as the atomic state since we don't have one.
We need to change that and then we can also s/crtc_state/crtc/
and s/conn_state/conn/ for the encoder hooks as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-13-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Do pipe updates after enables for everyone

Currently only port sync pipes do the sequence such that
we first do the modeset part for every pipe and then do
the plane/etc. updates. Let's follow that apporach for
all pipes in skl+ so that we can properly integrate the
port sync into the normal modeset flow.

v2: Remove now stale TODO of port sync slave entries[]
s/oldnew/new/

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-12-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Fix port sync code to work with >2 pipes

Don't assume there is just one port sync slave. We might have several.

v2: Fix unitialized new_crtc_state usage (José)
Fix clearing of modeset_pipes for slaves
s/oldnew/new/

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Eliminate port sync copy pasta

Remove the copy pasted port sync crtc enable functions and instead
just split the normal function into the two parts we need.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Implement port sync for SKL+

Transcoder port sync was introduced to the hardware in BDW. We
can trivially enable it for SKL+ since the same codepaths are
already used for ICL+ port sync. The only difference is the actual
location of the bits we need to poke.

We leave BDW out (at least for now) since it uses different modeset
paths that haven't been adapted for port sync, and IIRC using the
feature would involve some extra workarounds we've not implemented.

Pre-BDW hardware does not support port sync so we'd have to tweak
the modeset sequence to start the pipes as close together as possible
and hope for the best. So far no one has seriously tried to implement
that.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/27
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-9-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Store cpu_transcoder_mask in device info

We have a bunch of code that would like to know which
CPU transcoders are actually present in the hardware. Rather than
use various ad-hoc methods let's just include a full bitmask in
the device info, alongside pipe_mask.

v2: Rebase

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318170235.15176-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Avoid setting timer->expires to 0

We use timer->expires == 0 to detect if a timer had been cancelled, but
it's a valid expiration we could set. Just skip using 0 and set the
expiry for the next jiffie.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403073657.13427-1-chris@chris-wilson.co.uk

drm/i915: Keep a per-engine request pool

Add a tiny per-engine request mempool so that we should always have a
request available for powermanagement allocations from tricky
contexts. This reserve is expected to be only used for kernel
contexts when barriers must be emitted [almost] without fail.

The main consumer for this reserved request is expected to be engine-pm,
for which we know that there will always be at least the previous pm
request that we can reuse under mempressure (so there should always be
a spare request for engine_park()).

This is an alternative to using a comparatively bulky mempool, which
requires custom handling for both our reserved allocation requirement
and to protect our TYPESAFE_BY_RCU slab cache. The advantage of mempool
would be that it would allow us to keep a larger per-engine request
pool. However, converting over to mempool is straightforward should the
need arise.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-and-tested-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402184037.21630-1-chris@chris-wilson.co.uk

drm/i915/tgl: Make Wa_14010229206 permanent

This workaround now applies to all steppings, not just A0.
Wa_1409085225 is a temporary A0-only W/A however it is
identical to Wa_14010229206 and hence the combined workaround
is made permanent.
Bspec: 52890

Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[mattrope: added missing blank line]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326234955.16155-1-swathi.dhanavanthri@intel.com

drm/i915/selftests: Check for has-reset before testing hostile contexts

In order to kill off a hostile context, we need to be able to reset the
GPU. So check that is supported prior to beginning the test.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402205839.25065-1-chris@chris-wilson.co.uk

drm/i915/gem: Utilize rcu iteration of context engines

Now that we can peek at GEM->engines[] and obtain a reference to them
using RCU, do so for instances where we can safely iterate the
potentially old copy of the engines. For setting, we can do this when we
know the engine properties are copied over before swapping, so we know
the new engines already have the global property and we update the old
before they are discarded. For reading, we only need to be safe; as we
do so on behalf of the user, their races are their own problem.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402124218.6375-1-chris@chris-wilson.co.uk

drm/i915/execlists: Peek at the next submission for error interrupts

If we receive the error interrupt before the CS interrupt, we may find
ourselves without an active request to reset, skipping the GPU reset.
All because the attempt to reset was too early.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401110435.30389-1-chris@chris-wilson.co.uk

drm/i915/uc: Cleanup kerneldoc warnings

drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:205: warning: Excess function parameter 'supported' description in 'intel_uc_fw_init_early'
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:205: warning: Excess function parameter 'platform' description in 'intel_uc_fw_init_early'
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:205: warning: Excess function parameter 'rev' description in 'intel_uc_fw_init_early'

drivers/gpu/drm/i915/gt/uc/intel_guc_log.c:696: warning: Function parameter or member 'log' not described in 'intel_guc_log_info'
drivers/gpu/drm/i915/gt/uc/intel_guc_log.c:696: warning: Excess function parameter 'guc' description in 'intel_guc_log_info'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330212254.18236-1-chris@chris-wilson.co.uk

drm/i915/gem: Drop cached obj->bind_count

We cached the number of vma bound to the object in order to speed up
shrinker decisions. This has been superseded by being more proactive in
removing objects we cannot shrink from the shrinker lists, and so we can
drop the clumsy attempt at atomically counting the bind count and
comparing it to the number of pinned mappings of the object. This will
only get more clumsier with asynchronous binding and unbinding.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401223924.16667-1-chris@chris-wilson.co.uk

drm/i915/gt: Make fence revocation unequivocal

If we must revoke the fence because the VMA is no longer present, or
because the fence no longer applies, ensure that we do and convert it
into an error if we try but cannot.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401210104.15907-3-chris@chris-wilson.co.uk

drm/i915/gt: Store the fence details on the fence

Make a copy of the object tiling parameters at the point of grabbing the
fence.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401210104.15907-2-chris@chris-wilson.co.uk

drm/i915/gt: Only wait for GPU activity before unbinding a GGTT fence

Only GPU activity via the GGTT fence is asynchronous, we know that we
control the CPU access directly, so we only need to wait for the GPU to
stop using the fence before we relinquish it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401210104.15907-1-chris@chris-wilson.co.uk

drm/i915/gem: Try allocating va from free space

If the current node/entry location is occupied, and the object is not
pinned, try assigning it some free space. We cannot wait here, so if in
doubt, we unreserve and try to grab all at once.

v2: Use the final pin_flags so that we won't have to move the object if
we find the wrong free space.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401194135.5442-1-chris@chris-wilson.co.uk

drm/i915/gt: fix spelling mistake "undeflow" -> "underflow"

There is a spelling mistake in comment, fix it.

Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401022506.52965-1-chenzhou10@huawei.com

drm/i915/gt: Align engine dump active/pending

Insert a space so that the same fields between active/pending execlists
state are aligned.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401111554.6279-1-chris@chris-wilson.co.uk

drm/i915/gem: Ignore readonly failures when updating relocs

If the user passes in a readonly reloc[], by the time we notice we have
already committed to modifying the execobjects, or have indeed done so
already. Reporting the failure just compounds the issue as we have no
second pass to fall back to anymore.

"Be damned if you do, and damned if you don't."

Testcase: igt/gem_exec_reloc/readonly
Fixes: 7dc8f1143778 ("drm/i915/gem: Drop relocation slowpath")
References: fddcd00a49e9 ("drm/i915: Force the slow path after a user-write error")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331162150.3635-1-chris@chris-wilson.co.uk

drm/i915/gt: Fill all the unused space in the GGTT

When we allocate space in the GGTT we may have to allocate a larger
region than will be populated by the object to accommodate fencing. Make
sure that this space beyond the end of the buffer points safely into
scratch space, in case the HW tries to access it anyway (e.g. fenced
access to the last tile row).

v2: Preemptively / conservatively guard gen6 ggtt as well.

Reported-by: Imre Deak <imre.deak@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1554
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331152348.26946-1-chris@chris-wilson.co.uk

drm/i915: Report all failed registers for ctx isolation

For CI it is enough to point out a single failure
in isolation. However it is beneficial to gather
info in logs for transients further down
the line.

Do not stop into first comparison failure but
continue probing forward.

v2: for all engines and poisons (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331135403.16906-1-mika.kuoppala@linux.intel.com

drm/i915/gt: Include the execlists CCID of each port in the engine dump

Since we print out EXECLISTS_STATUS in the dump, also print out the CCID
of each context so we can cross check between the two.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331094239.23145-1-chris@chris-wilson.co.uk

drm/i915/execlists: Pause CS flow before reset

Since we may be attempting to reset an active engine, we try to freeze
it in place before resetting -- to be on the safe side. We can go one
step further if we are using the CS flow semaphore to prevent the
context switching into the next.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331091459.29179-2-chris@chris-wilson.co.uk

drm/i915/selftests: Tidy up an error message for live_error_interrupt

Since we don't wait for the error interrupt to reset, restart and then
complete the guilty request, clean up the error messages.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331091459.29179-1-chris@chris-wilson.co.uk

drm/i915/gt: Include a few tracek for timeslicing

Add a few telltales to see when timeslicing is being enabled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331120502.14713-1-chris@chris-wilson.co.uk

drm/i915: Defer kicking the tasklet until all rescheduling is complete

Since we may kick more than engine, and may kick each one a couple of
times, coalesce the tasklet execution to the end. This also ensures that
we have the chance to run the tasklet immediately after priority
bumping.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331114852.11583-1-chris@chris-wilson.co.uk

drm/i915/tc/icl: Update TC vswing tables

Specification was updated with vswing tables for different
configurations.
Also reordering icl_mg_phy_ddi_buf_trans struct to match table order.

BSpec: 21735
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330210044.130510-3-jose.souza@intel.com

drm/i915/dp/ehl: Update vswing table for HBR and RBR

EHL has now only one table for all DP rates.

BSpec: 21257
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330210044.130510-2-jose.souza@intel.com

drm/i915/dp: Return the right vswing tables

DDI ports have its encoders initialized with INTEL_OUTPUT_DDI type and
later eDP ports that have the type changed to INTEL_OUTPUT_EDP.
But for all other DDI ports it can drive HDMI or DP depending on what
user connects to the ports.

ehl_get_combo_buf_trans() and tgl_get_combo_buf_trans() was checking
for INTEL_OUTPUT_DP that was never true, causing wrong vswing tables
being used.

So here replacing the INTEL_OUTPUT_DP checks by the valid output types
that this functions receives as parameters. HDMI cases will be
correctly handled as it do not use encoder->type, instead it calls the
functions with INTEL_OUTPUT_HDMI as type parameter and HDMI don't have
retraining.

v2:
changed INTEL_OUTPUT_DDI to INTEL_OUTPUT_EDP and INTEL_OUTPUT_HDMI

Fixes: bd3cf6f7ce20 ("drm/i915/dp/tgl+: Update combo phy vswing tables")
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330210044.130510-1-jose.souza@intel.com

drm/i915/icl+: Don't enable DDI IO power on a TypeC port in TBT mode

The DDI IO power well must not be enabled for a TypeC port in TBT mode,
ensure this during driver loading/system resume.

This gets rid of error messages like
[drm] *ERROR* power well DDI E TC2 IO state mismatch (refcount 1/enabled 0)

and avoids leaking the power ref when disabling the output.

Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330152244.11316-1-imre.deak@intel.com

drm/i915/execlists: Double check breadcrumb before crying foul

  process_csb: 0000:00:02.0 bcs0: cs-irq head=4, tail=5
  process_csb: 0000:00:02.0 bcs0: csb[5]: status=0x00008002:0x60000020
  trace_ports: 0000:00:02.0 bcs0: preempted { ff84:45154! prio 2 }
  trace_ports: 0000:00:02.0 bcs0: promote { ff84:45155* prio 2 }
  trace_ports: 0000:00:02.0 bcs0: submit { ff84:45156 prio 2 }

  process_csb: 0000:00:02.0 bcs0: cs-irq head=5, tail=6
  process_csb: 0000:00:02.0 bcs0: csb[6]: status=0x00000018:0x60000020
  trace_ports: 0000:00:02.0 bcs0: completed { ff84:45155* prio 2 }
  process_csb: 0000:00:02.0 bcs0: ring:{start:0x00178000, head:0928, tail:0928, ctl:00000000, mode:00000200}
  process_csb: 0000:00:02.0 bcs0: rq:{start:00178000, head:08b0, tail:08f0, seqno:ff84:45155, hwsp:45156},
  process_csb: 0000:00:02.0 bcs0: ctx:{start:00178000, head:e000928, tail:0928},
  process_csb: GEM_BUG_ON("context completed before request")

In this sequence, we can see that although we have submitted the next
request [ff84:45156] to HW (via ELSP[]) it has not yet reported the
lite-restore. Instead, we see the completion event of the currently
active request [ff84:45155] but at the time of processing that event,
the breadcrumb has not yet been written. Though by the time we do print
out the debug info, the seqno write of ff84:45156 has landed!

Therefore there is a serialisation problem between the seqno writes and
CS events, not just between the CS buffer and its head/tail pointers as
previously observed on Icelake.

This is not a huge problem, as we don't strictly rely on the breadcrumb
to determine HW activity, but it may indicate that interrupt delivery is
before the seqno write, aka bringing back the plague of missed
interrupts from yesteryear. However, there is no indication of this
wider problem, so let's just flush the seqno read before reporting an
error. If it persists after the fresh read we can worry again.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330234318.30638-1-chris@chris-wilson.co.uk

drm/i915/perf: don't read head/tail pointers outside critical section

Reading or writing those fields should only happen under
stream->oa_buffer.ptr_lock.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: d1df41eb72ef ("drm/i915/perf: rework aging tail workaround")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330091411.37357-1-lionel.g.landwerlin@intel.com

drm/i915/execlists: Explicitly reset both reg and context runtime

Upon a GPU reset, we copy the default context image over top of the
guilty image. This will rollback the CTX_TIMESTAMP register to before
our value of ce->runtime.last. Reset both back to 0 so that we do not
encounter an underflow on the next schedule out after resume.

This should not be a huge issue in practice, as hangs should be rare in
correct code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330125827.5804-1-chris@chris-wilson.co.uk

drm/i915/gem: Split eb_vma into its own allocation

Use a separate array allocation for the execbuf vma, so that we can
track their lifetime independently from the copy of the user arguments.
With luck, this has a secondary benefit of splitting the malloc size to
within reason and avoid vmalloc. The downside is that we might require
two separate vmallocs -- but much less likely.

In the process, this prevents a memory leak on the ww_mutex error
unwind.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1390
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330133710.14385-1-chris@chris-wilson.co.uk

drm/i915/perf: Schedule oa_config after modifying the contexts

We wish that the scheduler emit the context modification commands prior
to enabling the oa_config, for which we must explicitly inform it of the
ordering constraints. This is especially important as we now wait for
the final oa_config setup to be completed and as this wait may be on a
distinct context to the state modifications, we need that command packet
to be always last in the queue.

We borrow the i915_active for its ability to track multiple timelines
and the last dma_fence on each; a flexible dma_resv. Keeping track of
each dma_fence is important for us so that we can efficiently schedule
the requests and reprioritise as required.

Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200327112212.16046-3-chris@chris-wilson.co.uk

drm/i915: Wrap i915_active in a simple kreffed struct

For conveniences of callers that just want to use an i915_active to
track a wide array of concurrent timelines, wrap the base i915_active
struct inside a kref. This i915_active will self-destruct after use.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200327112212.16046-2-chris@chris-wilson.co.uk

drm/i915: Allow for different modes of interruptible i915_active_wait

Allow some users the discretion to not immediately return on a normal
signal. Hopefully, they will opt to use TASK_KILLABLE instead.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200327112212.16046-1-chris@chris-wilson.co.uk

drm/i915/selftests: Check timeout before flush and cond checks

Allow a bit of leniency for the CPU scheduler to be distracted while we
flush the tasklet and so ensure that we always check the status of the
request once more before timing out.

v2: Wait until the HW acked the submit, and we do any secondary actions
for the submit (e.g. timeslices)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330121644.25277-1-chris@chris-wilson.co.uk

drm/i915/execlists: Include priority info in trace_ports

Add some extra information into trace_ports to help with reviewing
correctness.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330113137.24425-1-chris@chris-wilson.co.uk

drm/i915/huc: Fix HuC register used in debugfs

We report HuC status in debugfs using register read, but
we missed that on Gen11+ HuC uses different register.
Use correct one.

While here, correct placement of the colon.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330113338.1713-1-michal.wajdeczko@intel.com

drm/i915/huc: Add more errors for I915_PARAM_HUC_STATUS

There might be many reasons why we failed to successfully
load and authenticate HuC firmware, but today we only use
single error in case of no HuC hardware. Add some more
error codes for most common cases (disabled, not installed,
corrupted or mismatched firmware).

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Robert M. Fosha <robert.m.fosha@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330113302.1670-1-michal.wajdeczko@intel.com

drm/i915/tgl: Add definitions for VRR registers and bits

Add definitions for registers grouped under Transcoder VRR function
with necessary bitfields.

Bspec: 49268

v2: Use REG_GENMASK, correct tabs/space indentation and move the
definitions near the transcoder section.(Jani)

v3: Remove unnecessary prefix from bit/mask definitions.(Manasi)

v4: Use 'trans' in macro for better readability.(Manasi)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319015941.28008-1-aditya.swarup@intel.com

drm/i915/execlists: Workaround switching back to a completed context

In what seems remarkably similar to the w/a required to not reload an
idle context with HEAD==TAIL, it appears we must prevent the HW from
switching to an idle context in ELSP[1], while simultaneously trying to
preempt the HW to run another context and a continuation of the idle
context (which is no longer idle).

We can achieve this by preventing the context from completing while we
reload a new ELSP (by applying ring_set_paused(1) across the whole of
dequeue), except this eventually fails due to a lite-restore into a
waiting semaphore does not generate an ACK. Instead, we try to avoid
making the GPU do anything too challenging and not submit a new ELSP
while the interrupts + CSB events appear to have fallen behind the
completed contexts. We expect it to catch up shortly so we queue another
tasklet execution and hope for the best.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1501
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200327201433.21864-1-chris@chris-wilson.co.uk

drm/i915: Include port sync state in the state dump

Dump the port sync stat in intel_dump_pipe_config().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-7-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.anavre@intel.com>

drm/i915: Use REG_FIELD_PREP() & co. for TRANS_DDI_FUNC_CTL2

Clean up the TRANS_DDI_FUNC_CTL2 programming/readout by
using REG_FIELD_PREP() & co.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Move icl_get_trans_port_sync_config() into the DDI code

Move the port sync readout into the DDI code where it belongs.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Drop usless master_transcoder assignments

The entire crtc state has been reset before readout so
master_transcoder is already set to INVALID.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Move TRANS_DDI_FUNC_CTL2 programming where it belongs

This port sync enable/disable stuff is misplaced. It's just another step
of the normal TRANS_DDI_FUNC_CTL enable. Move it to its natural place.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915/mst: Use .compute_config_late() to compute master transcoder

Use the recently introduced encoder .compute_config_late() hook to
do the MST master transcoder assignment. Avoids having to do it
in a funny way before we know the CPU transcoder of each pipe.

And now we can also properly use hw.active instead of uapi.active
since it too has been calculated earlier for everyone.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Differentiate between aliasing-ppgtt and ggtt pinning

Userptr causes lockdep to complain when we are using the aliasing-ppgtt
(and ggtt, but for that it is rightfully so to complain about) in that
when we revoke the userptr we take a mutex which we also use to revoke
the mmaps. However, we only revoke mmaps for GGTT bindings and we never
allow userptr to create a GGTT binding so the warning should be false
and is simply caused by our conflation of the aliasing-ppgtt with the
ggtt. So lets try treating the binding into the aliasing-ppgtt as a
separate lockclass from the ggtt. The downside is that we are
deliberately suppressing lockdep;s ability to warn us of cycles.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/478
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326142727.31962-1-chris@chris-wilson.co.uk

drm: Constify adjusted_mode a bit

The DP link computation functions shouldn't modify the
adjusted_mode so make it const.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319163844.22783-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Get rid of silly void* from MST code

Not sure why this thing is trying to avoid declaring the proper
type for these pointers. But since these are used only once let's
just get rid of the local variable entirely.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310202752.28454-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: use forced codec wake on all gen9+ platforms

Commit 632f3ab95fe2 ("drm/i915/audio: add codec wakeup override
enabled/disable callback"), added logic to toggle Codec Wake on gen9.
This is used by audio driver when it resets the HDA controller.

It seems explicit toggling of the wakeline can help to fix problems
with probe failing on some gen12 platforms. And based on specs, there
is no reason why this programming sequence should not be applied to all
gen9+ platforms. No side-effects are seen on gen10/11. So apply
the wake-logic to all gen9+ platforms.

Link: https://github.com/thesofproject/linux/issues/1847
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324153212.6303-1-kai.vehmanen@linux.intel.com

drm/i915/perf: add new open param to configure polling of OA buffer

This new parameter let's the application choose how often the OA
buffer should be checked on the CPU side for data availability. Longer
polling period tend to reduce CPU overhead if the application does not
care about somewhat real time data collection.

v2: Allow disabling polling completely with 0 value (Lionel)
v3: Version the new parameter (Joonas)
v4: Rebase (Umesh)
v5: Make poll delay value of 0 invalid (Umesh)
v6:
- Describe poll_oa_period (Ashutosh)
- Fix comment for new poll parameter (Lionel)
- Drop open_flags in read_properties_unlocked (Lionel)
- Rename uapi parameter (Ashutosh)
v7: Reword the comment in uapi (Ashutosh)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324185457.14635-4-umesh.nerlige.ramappa@intel.com

drm/i915/perf: move pollin setup to non hw specific code

This isn't really gen specific stuff, so just move it to the common
code.

v2: Rebase (Umesh)
v3: Remove comment, pollin is a per stream state already (Ashutosh)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324185457.14635-3-umesh.nerlige.ramappa@intel.com

drm/i915/perf: rework aging tail workaround

We're about to introduce an options to open the perf stream, giving
the user ability to configure how often it wants the kernel to poll
the OA registers for available data.

Right now the workaround against the OA tail pointer race condition
requires at least twice the internal kernel polling timer to make any
data available.

This changes introduce checks on the OA data written into the circular
buffer to make as much data as possible available on the first
iteration of the polling timer.

v2: Use OA_TAKEN macro without the gtt_offset (Lionel)
v3: (Umesh)
- Rebase
- Change report to report32 from below review
https://patchwork.freedesktop.org/patch/330704/?series=66697&rev=1
v4: (Ashutosh, Lionel)
- Fix checkpatch errors
- Fix aging_timestamp initialization
- Check for only one valid landed report
- Fix check for unlanded report
v5: (Ashutosh)
- Fix bug in accurately determining landed report.
- Optimize the check for landed reports by going as far as the
previously determined aged tail.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324185457.14635-2-umesh.nerlige.ramappa@intel.com

drm/i915: Cast remain to unsigned long in eb_relocate_vma

A recent commit in clang added -Wtautological-compare to -Wall, which is
enabled for i915 after -Wtautological-compare is disabled for the rest
of the kernel so we see the following warning on x86_64:

../drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c:1433:22: warning:
result of comparison of constant 576460752303423487 with expression of
type 'unsigned int' is always false
[-Wtautological-constant-out-of-range-compare]
         if (unlikely(remain > N_RELOC(ULONG_MAX)))
            ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
../include/linux/compiler.h:78:42: note: expanded from macro 'unlikely'
# define unlikely(x)    __builtin_expect(!!(x), 0)
                                            ^
1 warning generated.

It is not wrong in the case where ULONG_MAX > UINT_MAX but it does not
account for the case where this file is built for 32-bit x86, where
ULONG_MAX == UINT_MAX and this check is still relevant.

Cast remain to unsigned long, which keeps the generated code the same
(verified with clang-11 on x86_64 and GCC 9.2.0 on x86 and x86_64) and
the warning is silenced so we can catch more potential issues in the
future.

Closes: https://github.com/ClangBuiltLinux/linux/issues/778
Suggested-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200214054706.33870-1-natechancellor@gmail.com

drm/i915/uc: do not free err log on uc_fini

We need to keep the GuC error logs around to debug the load failure,
so we can't clean them in the error unwind, which includes uc_fini().
Moving the cleanup to driver remove ensures that the logs stick around
long enough for us to dump them.

v2: reword commit msg (John)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-7-daniele.ceraolospurio@intel.com

drm/i915/uc: Move uC debugfs to its own folder under GT

uC is a component of the GT, so it makes sense for the uC debugfs files
to be in the GT folder. A subfolder has been used to keep the same
structure we have for the code.

v2: use intel_* prefix (Jani), rebase on new gt_debugfs_register_files,
fix permissions for writable debugfs files.

v3: Rename files (Michal), remove blank line (Jani), fix sparse warns.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com> #v2
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-6-daniele.ceraolospurio@intel.com

drm/i915/debugfs: move uC printers and update debugfs file names

Move the printers to the respective files for clarity. The
guc_load_status debugfs has been squashed in the guc_info one, has
having separate ones wasn't very useful. The HuC debugfs has been
renamed huc_info to match.

v2: keep printing HUC_STATUS2 (Tony), avoid const->non-const
container_of (Jani)

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-5-daniele.ceraolospurio@intel.com

drm/i915/huc: make "support huc" reflect HW capabilities

We currently initialize HuC support based on GuC being enabled in
modparam; this means that huc_is_supported() can return false on HW that
does have a HuC when enable_guc=0. The rationale for this behavior is
that HuC requires GuC for authentication and therefore is not supported
by itself. However, we do not allow defining HuC fw wthout GuC fw and
selecting HuC in modparam implicitly selects GuC as well, so we can't
actually hit a scenario where HuC is selected alone. Therefore, we can
flip the support check to reflect the HW capabilities and fw
availability, which is more intuitive and will make it cleaner to log
HuC the difference between not supported in HW and not selected.

Removing the difference between GuC and HuC also allows us to simplify
the init_early, since we don't need to differentiate the support based
on the type of uC.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-4-daniele.ceraolospurio@intel.com

drm/i915/guc: drop stage_pool debugfs

The pool will be private to GuC in the new submission scheme, so we
won't be able to print it and we can just drop the current legacy code.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-3-daniele.ceraolospurio@intel.com

drm/i915/gt: allow setting generic data pointer

When registering debugfs files the intel gt debugfs library
forces a 'struct *gt' private data on the caller.

To be open to different usages make the new
"intel_gt_debugfs_register_files()"[*] function more generic by
converting the 'struct *gt' pointer to a 'void *' type.

I take the chance to rename the functions by using "intel_gt_" as
prefix instead of "debugfs_", so that "debugfs_gt_register_files()"
becomes "intel_gt_debugfs_register_files()".

Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326181121.16869-2-daniele.ceraolospurio@intel.com

drm/i915/display: Fix mode private_flags comparison at atomic_check

This patch fixes the private_flags of mode to be checked and
compared against uapi.mode and not from hw.mode. This helps
properly trigger modeset at boot if desired by driver.

It helps resolve audio_codec initialization issues if display
is connected at boot. Initial discussion on this issue has happened
on below thread:
https://patchwork.freedesktop.org/series/74828/

v2: No functional change. Fixed the Closes tag and added
Maarten's RB.

v3: Added Fixes tag.

Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Souza, Jose <jose.souza@intel.com>
Fixes: 58d124ea2739 ("drm/i915: Complete crtc hw/uapi split, v6.")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1363
Suggested-by: Ville Syrjä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: SweeAun Khor <swee.aun.khor@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326125111.11081-1-uma.shankar@intel.com

drm/i915/display: Return early after MISSING_CASE for write_dp_sdp

Avoid using the uninitialised len along the impossible error path to
shut the compiler up:

drivers/gpu/drm/i915/display/intel_dp.c:4928 intel_write_dp_sdp() error: uninitialized symbol 'len'.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325140754.12636-1-chris@chris-wilson.co.uk

drm/i915/display: Remove useless but deadly local

Beware dereferencing the NULL pointer prior to checking for its
existence.

<1>[    3.324694] BUG: kernel NULL pointer dereference, address: 0000000000000000
<1>[    3.324696] #PF: supervisor read access in kernel mode
<4>[    3.324704] hardirqs last  enabled at (751): [<ffffffff812a4f77>] d_lookup+0x57/0xa0
<1>[    3.324709] #PF: error_code(0x0000) - not-present page
<4>[    3.324716] hardirqs last disabled at (752): [<ffffffff8125a1b9>] __slab_alloc.isra.89.constprop.94+0x19/0x70
<4>[    3.324720] softirqs last  enabled at (402): [<ffffffff81e00385>] __do_softirq+0x385/0x47f
<6>[    3.324725] PGD 0 P4D 0
<4>[    3.324733] softirqs last disabled at (395): [<ffffffff810bab6a>] irq_exit+0xba/0xc0
<4>[    3.324762] Oops: 0000 [#1] PREEMPT SMP PTI
<4>[    3.324768] CPU: 0 PID: 380 Comm: systemd-udevd Not tainted 5.6.0-rc7-CI-CI_DRM_8189+ #1
<4>[    3.324776] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016
<4>[    3.324840] RIP: 0010:intel_read_infoframe+0x3a/0x170 [i915]
<4>[    3.324848] Code: 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 31 c0 83 f9 0a 77 12 ba 01 00 00 00 48 d3 e2 f7 c2 c0 05 00 00 48 0f 45 c7 83 fb 03 <4c> 8b 20 0f 84 f2 00 00 00 83 fb 0a 0f 84 f3 00 00 00 83 fb 07 0f
<4>[    3.324865] RSP: 0018:ffffc900005438b0 EFLAGS: 00010212
<4>[    3.324871] RAX: 0000000000000000 RBX: 0000000000000082 RCX: 0000000000000001
<4>[    3.324879] RDX: 0000000000000002 RSI: ffff8883f8309000 RDI: ffff8883f80cbe00
<4>[    3.324887] RBP: ffff8883f8309b34 R08: 000000000000000e R09: 0000000000000001
<4>[    3.324894] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883f7ac0000
<4>[    3.324901] R13: ffff8883f7ac0000 R14: ffff8883f7ac0d90 R15: ffff8883f844d000
<4>[    3.324908] FS:  00007ffa4a839680(0000) GS:ffff888410000000(0000) knlGS:0000000000000000
<4>[    3.324917] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[    3.324923] CR2: 0000000000000000 CR3: 0000000401aa4002 CR4: 00000000001606f0
<4>[    3.324930] Call Trace:
<4>[    3.324980]  ? gen6_read32+0x272/0x300 [i915]
<4>[    3.325044]  intel_ddi_get_config+0x238/0x610 [i915]
<4>[    3.325108]  hsw_crt_get_config+0x12/0x40 [i915]
<4>[    3.325173]  intel_modeset_setup_hw_state+0x3b3/0x1660 [i915]
<4>[    3.325182]  ? ww_mutex_lock+0x39/0x70
<4>[    3.325190]  ? drm_modeset_lock+0xad/0x120
<4>[    3.325254]  intel_modeset_init+0x582/0x1c50 [i915]

Fixes: 419190429cd1 ("drm/i915/hdmi: use struct drm_device based logging")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326082838.16357-1-chris@chris-wilson.co.uk

drm/i915: Drop final few uses of drm_i915_private.engine

We've migrated all the heavy users over to the intel_gt, and can finally
drop the last few users and with that the mirror in dev_priv->engine[].

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325234803.6175-1-chris@chris-wilson.co.uk

drm/i915/wopcm: convert to drm device based logging

Prefer drm_dbg() over DRM_DEV_DEBUG_DRIVER() and drm_err() over
dev_err().

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/017d9bdc171481da13ba9492492625fc6878844d.1584714939.git.jani.nikula@intel.com

drm/i915/psr: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cac03aba0a363c8f704035f1f771c73385235a35.1584714939.git.jani.nikula@intel.com

drm/i915/display: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffdbda0a0fe18354867b3f8c7a83f59f0963711d.1584714939.git.jani.nikula@intel.com

drm/i915/display: clean up intel_PLL_is_valid()

Drop useless macro hiding the return. Fix superfluous whitespace. Rename
function to all lowercase.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/307c9f87cb2fbd5d2d67ec6adcde7ab669c2b93f.1584714939.git.jani.nikula@intel.com

drm/i915/tv: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e08dbd1933e1dbbd8e9f1954f5b0a9db946c4e7d.1584714939.git.jani.nikula@intel.com

drm/i915/connector: use MISSING_CASE instead of logging

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bb70a05a2c20307ab67b89c4682f5afc5953fcaf.1584714939.git.jani.nikula@intel.com

drm/i915/dsi: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/436b6dde60dcba235085c8bb216c841267519fa6.1584714939.git.jani.nikula@intel.com

drm/i915/hdmi: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fbc5396e6a512195b38c24b113aeebe23755c716.1584714939.git.jani.nikula@intel.com

drm/i915/dsi: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bc29cddbba9dea57f8f843be2a6b5e1f7358b5c.1584714939.git.jani.nikula@intel.com

drm/i915/dp_mst: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5ee3b8040658b5b4ef0b8b1a546fa04f554cdf6a.1584714939.git.jani.nikula@intel.com

drm/i915/dp_aux_backlight: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/733d3032e61cb4892a516d5be5da5ec73bdb9fa1.1584714939.git.jani.nikula@intel.com

drm/i915/display_power: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/25e56d1b7df3b1e91024eb969fb839fdcbdcb35e.1584714939.git.jani.nikula@intel.com

drm/i915/ddi: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e09bb6e97b2fbc44303acce0523dc35e3e74a456.1584714939.git.jani.nikula@intel.com

drm/i915/gt: Stage the transfer of the virtual breadcrumb

We move the virtual breadcrumb from one physical engine to the next, if
the next virtual request is scheduled on a new physical engine. Since
the virtual context can only be in one signal queue, we need it to track
the current physical engine for the new breadcrumbs. However, to move
the list we need both breadcrumb locks -- and since we cannot take both
at the same time (unless we are careful and always ensure consistent
ordering) stage the movement of the signaler via the current virtual
request.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1510
Fixes: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325130059.30600-1-chris@chris-wilson.co.uk

drm/i915: Immediately execute the fenced work

If the caller allows and we do not have to wait for any signals,
immediately execute the work within the caller's process. By doing so we
avoid the overhead of scheduling a new task, and the latency in
executing it, at the cost of pulling that work back into the immediate
context. (Sometimes we still prefer to offload the task to another cpu,
especially if we plan on executing many such tasks in parallel for this
client.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325120227.8044-2-chris@chris-wilson.co.uk

drm/i915/execlists: Pull tasklet interrupt-bh local to direct submission

We dropped calling process_csb prior to handling direct submission in
order to avoid the nesting of spinlocks and lift process_csb() and the
majority of the tasklet out of irq-off. However, we do want to avoid
ksoftirqd latency in the fast path, so try and pull the interrupt-bh
local to direct submission if we can acquire the tasklet's lock.

v2: Document the read of pending[0] from outside the tasklet with
READ_ONCE.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325120227.8044-1-chris@chris-wilson.co.uk

drm/i915/selftests: Measure the energy consumed while in RC6

Measure and compare the energy consumed, as reported by the rapl MSR,
by the GPU while in RC0 and RC6 states. Throw an error if RC6 does not
at least halve the energy consumption of RC0, as this more than likely
means we failed to enter RC0 correctly.

If we can't measure the energy draw with the MSR, then it will report 0
for both measurements. Since the measurement works on all gen6+, this seems
worth flagging as an error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325101502.12591-1-chris@chris-wilson.co.uk

drm/i915/execlists: Drop setting sibling priority hint on virtual engines

We set the priority hint on execlists to avoid executing the tasklet for
when we know that there will be no change in execution order. However,
as we set it from the virtual engine for all siblings, but only one
physical engine may respond, we leave the hint set on the others
stopping direct submission that could take place.

If we do not set the hint, we may attempt direct submission even if we
don't expect to submit. If we set the hint, we may not do any submission
until the tasklet is run (and sometimes we may park the engine before
that has had a chance). Ergo there's only a minor ill-effect on mixed
virtual/physical engine workloads where we may try and fail to do direct
submission more often than required. (Pure virtual / engine workloads
will have redundant tasklet execution suppressed as normal.)

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1522
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325101358.12231-1-chris@chris-wilson.co.uk

drm/i915/display/fbc: Make fences a nice-to-have for GEN9+

dGFX has local memory so it does not have aperture or support
CPU fences but even for iGFX it have a small number of fences.

As replacement for fences to track frontbuffer modifications by CPU
we have a software tracking that is already in used by FBC and PSR.
PSR don't support fences so it shows that this tracking is reliable.

So lets make fences a nice-to-have to activate FBC for GEN9+, this
will allow us to enable FBC for dGFXs and iGFXs even when there is no
available fence.

We do not set fences to rotated planes but FBC only have restrictions
against 16bpp, so adding it here.

Also adding a new check for the tiling format, fences are only set
to X and Y tiled planes but again FBC don't have any restrictions
against tiling so adding linear as supported as well, other formats
should be added after tested but IGT only supports drawing in thse
3 formats.

intel_fbc_hw_tracking_covers_screen() maybe can also have the same
treatment as fences but BSpec is not clear if the size limitation is
for hardware tracking or general use of FBC and I don't have a 5K
display to test it, so keeping as is for safety.

v2:
- Added tiling and pixel format rotation checks
- Changed the GEN version not requiring fences to 11 from 9, DDX
needs some changes but it don't have support for GEN11+

v3:
- Changed back to GEN9+
- Moved GEN test to inside of tiling_is_valid()

v4:
- moved rotation check to its own functions

v5:
- renamed rotations_is_valid to rotation_is_valid
- moved pre-g4x rotation check to rotation_is_valid()

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319211535.114625-1-jose.souza@intel.com

drm/i915/gt: Select the deepest available parking mode for rc6

On Ivybridge, we can go lower than rc6 to rc6p. And this is required for
Ivybridge to hit the same minimum power consumption as rc6 on other
platforms, so make it so.

v2: Update selftest to include all rc6 residency counters

Note that Andi did mention that we should be converting the magic
numbers into opaque magic macros, so if they ever get reused (unlikely
given only Ivybridge used the extra modes) we'll need to pay back the
technical debt.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1518
Fixes: 730eaeb52426 ("drm/i915/gt: Manual rc6 entry upon parking")
Testcase: igt/i915_pm_rc6_residency/rc6-idle
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134232.8773-1-chris@chris-wilson.co.uk