OSDN Git Service
Linus Torvalds [Sun, 24 Jan 2021 19:05:48 +0000 (11:05 -0800)]
Merge tag 'driver-core-5.11-rc5' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.11-rc5 that resolve some
reported problems:
- revert of a -rc1 patch that was causing problems with some machines
- device link device name collision problem fix (busses only have to
name devices unique to their bus, not unique to all busses)
- kernfs splice bugfixes to resolve firmware loading problems for
Qualcomm systems.
- other tiny driver core fixes for minor issues reported.
All of these have been in linux-next with no reported problems"
* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix device link device name collision
driver core: Extend device_is_dependent()
kernfs: wire up ->splice_read and ->splice_write
kernfs: implement ->write_iter
kernfs: implement ->read_iter
Revert "driver core: Reorder devices on successful probe"
Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
drivers core: Free dma_range_map when driver probe failed
Linus Torvalds [Sun, 24 Jan 2021 19:02:01 +0000 (11:02 -0800)]
Merge tag 'staging-5.11-rc5' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
problems.
Nothing major, just a few small fixes, all of these have been in
linux-next for a while and full details are in the shortlog"
* tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
iio: ad5504: Fix setting power-down state
counter:ti-eqep: remove floor
drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
iio: sx9310: Off by one in sx9310_read_thresh()
Linus Torvalds [Sun, 24 Jan 2021 18:56:45 +0000 (10:56 -0800)]
Merge tag 'tty-5.11-rc5' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
problems:
- two patches to fix up writing to ttys with splice
- mvebu-uart driver fix for reported problem
All of these have been in linux-next with no reported problems"
* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix up hung_up_tty_write() conversion
tty: implement write_iter
serial: mvebu-uart: fix tx lost characters at power off
Linus Torvalds [Sun, 24 Jan 2021 18:54:54 +0000 (10:54 -0800)]
Merge tag 'usb-5.11-rc5' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.11-rc5. They resolve:
- xhci issues for some reported problems
- ehci driver issue for one specific device
- USB gadget fixes for some reported problems
- cdns3 driver fixes for issues reported
- MAINTAINERS file update
- thunderbolt minor fix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: bdc: Make bdc pci driver depend on BROKEN
xhci: tegra: Delay for disabling LFPS detector
xhci: make sure TRB is fully written before giving it to the controller
usb: udc: core: Use lock when write to soft_connect
USB: gadget: dummy-hcd: Fix errors in port-reset handling
usb: gadget: aspeed: fix stop dma register setting.
USB: ehci: fix an interrupt calltrace error
ehci: fix EHCI host controller initialization sequence
MAINTAINERS: update Peter Chen's email address
thunderbolt: Drop duplicated 0x prefix from format string
MAINTAINERS: Update address for Cadence USB3 driver
usb: cdns3: imx: improve driver .remove API
usb: cdns3: imx: fix can't create core device the second time issue
usb: cdns3: imx: fix writing read-only memory issue
Linus Torvalds [Sun, 24 Jan 2021 18:24:20 +0000 (10:24 -0800)]
Merge tag 'irq_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a kernel panic in mips-cpu due to invalid irq domain hierarchy.
- Fix to not lose IPIs on bcm2836.
- Fix for a bogus marking of ITS devices as shared due to unitialized
stack variable.
- Clear a phantom interrupt on qcom-pdc to unblock suspend.
- Small cleanups, warning and build fixes.
* tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Export irq_check_status_bit()
irqchip/mips-cpu: Set IPI domain parent chip
irqchip/pruss: Simplify the TI_PRUSS_INTC Kconfig
irqchip/loongson-liointc: Fix build warnings
driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
irqchip/bcm2836: Fix IPI acknowledgement after conversion to handle_percpu_devid_irq
irqchip/irq-sl28cpld: Convert comma to semicolon
genirq/msi: Initialize msi_alloc_info before calling msi_domain_prepare_irqs()
Linus Torvalds [Sun, 24 Jan 2021 18:17:03 +0000 (10:17 -0800)]
Merge tag 'objtool_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Adjust objtool to handle a recent binutils change to not generate
unused symbols anymore.
- Revert the fail-the-build-on-fatal-errors objtool strategy for now
due to the ever-increasing matrix of supported toolchains/plugins and
them causing too many such fatal errors currently.
- Do not add empty symbols to objdump's rbtree to accommodate clang
removing section symbols.
* tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Don't fail on missing symbol table
objtool: Don't fail the kernel build on fatal errors
objtool: Don't add empty symbols to the rbtree
Linus Torvalds [Sun, 24 Jan 2021 18:09:20 +0000 (10:09 -0800)]
Merge tag 'sched_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Correct the marking of kthreads which are supposed to run on a
specific, single CPU vs such which are affine to only one CPU, mark
per-cpu workqueue threads as such and make sure that marking
"survives" CPU hotplug. Fix CPU hotplug issues with such kthreads.
- A fix to not push away tasks on CPUs coming online.
- Have workqueue CPU hotplug code use cpu_possible_mask when breaking
affinity on CPU offlining so that pending workers can finish on newly
arrived onlined CPUs too.
- Dump tasks which haven't vacated a CPU which is currently being
unplugged.
- Register a special scale invariance callback which gets called on
resume from RAM to read out APERF/MPERF after resume and thus make
the schedutil scaling governor more precise.
* tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Relax the set_cpus_allowed_ptr() semantics
sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
sched: Prepare to use balance_push in ttwu()
workqueue: Restrict affinity change to rescuer
workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
kthread: Extract KTHREAD_IS_PER_CPU
sched: Don't run cpu-online with balance_push() enabled
workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
sched/core: Print out straggler tasks in sched_cpu_dying()
x86: PM: Register syscore_ops for scale invariance
Linus Torvalds [Sun, 24 Jan 2021 17:58:38 +0000 (09:58 -0800)]
Merge tag 'timers_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Fix an integer overflow in the NTP RTC synchronization which led to
the latter happening every 2 seconds instead of the intended every 11
minutes.
- Get rid of now unused get_seconds().
* tag 'timers_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ntp: Fix RTC synchronization on 32-bit platforms
timekeeping: Remove unused get_seconds()
Linus Torvalds [Sun, 24 Jan 2021 17:46:05 +0000 (09:46 -0800)]
Merge tag 'x86_urgent_for_v5.11_rc5' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a new Intel model number for Alder Lake
- Differentiate which aspects of the FPU state get saved/restored when
the FPU is used in-kernel and fix a boot crash on K7 due to early
MXCSR access before CR4.OSFXSR is even set.
- A couple of noinstr annotation fixes
- Correct die ID setting on AMD for users of topology information which
need the correct die ID
- A SEV-ES fix to handle string port IO to/from kernel memory properly
* tag 'x86_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add another Alder Lake CPU to the Intel family
x86/mmx: Use KFPU_387 for MMX string operations
x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
x86/topology: Make __max_die_per_package available unconditionally
x86: __always_inline __{rd,wr}msr()
x86/mce: Remove explicit/superfluous tracing
locking/lockdep: Avoid noinstr warning for DEBUG_LOCKDEP
locking/lockdep: Cure noinstr fail
x86/sev: Fix nonistr violation
x86/entry: Fix noinstr fail
x86/cpu/amd: Set __max_die_per_package on AMD
x86/sev-es: Handle string port IO to kernel memory properly
Linus Torvalds [Sun, 24 Jan 2021 17:40:51 +0000 (09:40 -0800)]
Merge tag 'powerpc-5.11-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bad interaction between the scv handling and the fallback L1D
flush, which could lead to user register corruption. Only affects
people using scv (~no one) on machines with old firmware that are
missing the L1D flush.
- Two small selftest fixes.
Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das,
and Tulio Magno Quites Machado Filho.
* tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: fix scv entry fallback flush vs interrupt
selftests/powerpc: Only test lwm/stmw on big endian
selftests/powerpc: Fix exit status of pkey tests
Linus Torvalds [Sun, 24 Jan 2021 17:35:28 +0000 (09:35 -0800)]
Merge tag 'for-linus-2021-01-24' of git://git./linux/kernel/git/brauner/linux
Pull misc fixes from Christian Brauner:
- Jann reported sparse complaints because of a missing __user
annotation in a helper we added way back when we added
pidfd_send_signal() to avoid compat syscall handling. Fix it.
- Yanfei replaces a reference in a comment to the _do_fork() helper I
removed a while ago with a reference to the new kernel_clone()
replacement
- Alexander Guril added a simple coding style fix
* tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
kthread: remove comments about old _do_fork() helper
Kernel: fork.c: Fix coding style: Do not use {} around single-line statements
signal: Add missing __user annotation to copy_siginfo_from_user_any
Linus Torvalds [Sun, 24 Jan 2021 17:27:14 +0000 (09:27 -0800)]
Merge tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"An important signal handling patch for stable, and two small cleanup
patches"
* tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not fail __smb_send_rqst if non-fatal signals are pending
fs/cifs: Simplify bool comparison.
fs/cifs: Assign boolean values to a bool variable
Linus Torvalds [Sat, 23 Jan 2021 20:02:58 +0000 (12:02 -0800)]
Merge branch 'mtd/fixes' of git://git./linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal.
* 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: omap: Use BCH private fields in the specific OOB layout
mtd: spinand: Fix MTD_OPS_AUTO_OOB requests
mtd: rawnand: intel: check the mtd name only after setting the variable
mtd: rawnand: nandsim: Fix the logic when selecting Hamming soft ECC engine
mtd: rawnand: gpmi: fix dst bit offset when extracting raw payload
Linus Torvalds [Sat, 23 Jan 2021 19:43:02 +0000 (11:43 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Another bunch of driver fixes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sprd: depend on COMMON_CLK to fix compile tests
Revert "i2c: imx: Remove unused .id_table support"
i2c: octeon: check correct size of maximum RECV_LEN packet
i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO
i2c: bpmp-tegra: Ignore unknown I2C_M flags
i2c: tegra: Wait for config load atomically while in ISR
Linus Torvalds [Sat, 23 Jan 2021 19:35:02 +0000 (11:35 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twelve minor fixes, all in drivers or doc.
Most of the fixes are pretty obvious (although we had two goes to get
the UFS sysfs doc right) and the biggest change is in the ufs driver
which they've extensively tested"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ibmvfc: Set default timeout to avoid crash during migration
scsi: target: tcmu: Fix use-after-free of se_cmd->priv
scsi: fnic: Fix memleak in vnic_dev_init_devcmd2
scsi: libfc: Avoid invoking response handler twice if ep is already completed
scsi: scsi_transport_srp: Don't block target in failfast state
scsi: docs: ABI: sysfs-driver-ufs: Rectify table formatting
scsi: ufs: Fix tm request when non-fatal error happens
scsi: ufs: Fix livelock of ufshcd_clear_ua_wluns()
scsi: ibmvfc: Fix missing cast of ibmvfc_event pointer to u64 handle
scsi: ufs: ufshcd-pltfrm depends on HAS_IOMEM
scsi: megaraid_sas: Fix MEGASAS_IOC_FIRMWARE regression
scsi: docs: ABI: sysfs-driver-ufs: Add DeepSleep power mode
Linus Torvalds [Sat, 23 Jan 2021 19:25:33 +0000 (11:25 -0800)]
Merge tag 'linux-kselftest-kunit-fixes-5.11-rc5' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah :
"Five fixes to the kunit tool and documentation from Daniel Latypov and
David Gow"
* tag 'linux-kselftest-kunit-fixes-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: move kunitconfig parsing into __init__, make it optional
kunit: tool: fix minor typing issue with None status
kunit: tool: surface and address more typing issues
Documentation: kunit: include example of a parameterized test
kunit: tool: Fix spelling of "diagnostic" in kunit_parser
Ronnie Sahlberg [Wed, 20 Jan 2021 22:22:48 +0000 (08:22 +1000)]
cifs: do not fail __smb_send_rqst if non-fatal signals are pending
RHBZ
1848178
The original intent of returning an error in this function
in the patch:
"CIFS: Mask off signals when sending SMB packets"
was to avoid interrupting packet send in the middle of
sending the data (and thus breaking an SMB connection),
but we also don't want to fail the request for non-fatal
signals even before we have had a chance to try to
send it (the reported problem could be reproduced e.g.
by exiting a child process when the parent process was in
the midst of calling futimens to update a file's timestamps).
In addition, since the signal may remain pending when we enter the
sending loop, we may end up not sending the whole packet before
TCP buffers become full. In this case the code returns -EINTR
but what we need here is to return -ERESTARTSYS instead to
allow system calls to be restarted.
Fixes:
b30c74c73c78 ("CIFS: Mask off signals when sending SMB packets")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Fri, 22 Jan 2021 22:31:00 +0000 (14:31 -0800)]
Merge tag 'for-5.11/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM integrity crash if "recalculate" used without "internal_hash"
- Fix DM integrity "recalculate" support to prevent recalculating
checksums if we use internal_hash or journal_hash with a key (e.g.
HMAC). Use of crypto as a means to prevent malicious corruption
requires further changes and was never a design goal for
dm-integrity's primary usecase of detecting accidental corruption.
- Fix a benign dm-crypt copy-and-paste bug introduced as part of a fix
that was merged for 5.11-rc4.
- Fix DM core's dm_get_device() to avoid filesystem lookup to get block
device (if possible).
* tag 'for-5.11/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: avoid filesystem lookup in dm_get_dev_t()
dm crypt: fix copy and paste bug in crypt_alloc_req_aead
dm integrity: conditionally disable "recalculate" feature
dm integrity: fix a crash if "recalculate" used without "internal_hash"
Linus Torvalds [Fri, 22 Jan 2021 21:55:00 +0000 (13:55 -0800)]
Merge tag 'perf-tools-fixes-v5.11-2-2021-01-22' of git://git./linux/kernel/git/acme/linux
Pull more perf tools fixes from Arnaldo Carvalho de Melo:
- Fix id index used in Intel PT for heterogeneous systems
- Fix overrun issue in 'perf script' for dynamically-allocated PMU type
number
- Fix 'perf stat' metrics containing the 'duration_time' synthetic
event
- Fix system PMU 'perf stat' metrics
* tag 'perf-tools-fixes-v5.11-2-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf script: Fix overrun issue for dynamically-allocated PMU type number
perf metricgroup: Fix system PMU metrics
perf metricgroup: Fix for metrics containing duration_time
perf evlist: Fix id index for heterogeneous systems
Linus Torvalds [Fri, 22 Jan 2021 21:51:17 +0000 (13:51 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Correctly mask out bits 63:60 in a kernel tag check fault address
(specified as unknown by the architecture). Previously they were just
zeroed but for kernel pointers they need to be all ones.
- Fix a panic (unexpected kernel BRK exception) caused by kprobes being
reentered due to an interrupt.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kprobes: Fix Uexpected kernel BRK exception at EL1
kasan, arm64: fix pointer tags in KASAN reports
Linus Torvalds [Fri, 22 Jan 2021 21:47:25 +0000 (13:47 -0800)]
Merge tag 'ceph-for-5.11-rc5' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A patch to zero out sensitive cryptographic data and two minor
cleanups prompted by the fact that a bunch of code was moved in this
cycle"
* tag 'ceph-for-5.11-rc5' of git://github.com/ceph/ceph-client:
libceph: fix "Boolean result is used in bitwise operation" warning
libceph, ceph: disambiguate ceph_connection_operations handlers
libceph: zero out session key and connection secret
Linus Torvalds [Fri, 22 Jan 2021 21:45:52 +0000 (13:45 -0800)]
Merge tag 'fixes-2021-01-22' of git://git./linux/kernel/git/rppt/memblock
Pull typo fix from Mike Rapoport:
"Fix typo in comment of memblock_phys_alloc_try_nid()"
* tag 'fixes-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm/memblock: Fix typo in comment of memblock_phys_alloc_try_nid()
Linus Torvalds [Fri, 22 Jan 2021 21:43:42 +0000 (13:43 -0800)]
Merge tag 'mmc-v5.11-rc3' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix initialization of block size when ext_csd isn't present
MMC host:
- sdhci-brcmstb: Fix mmc timeout errors on S5 suspend
- sdhci-of-dwcmshc: Fix request accessing RPMB
- sdhci-xenon: Fix 1.8v regulator stabilization"
* tag 'mmc-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: don't initialize block size from ext_csd if not present
mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend
mmc: sdhci-xenon: fix 1.8v regulator stabilization
mmc: sdhci-of-dwcmshc: fix rpmb access
Linus Torvalds [Fri, 22 Jan 2021 21:38:40 +0000 (13:38 -0800)]
Merge tag 'platform-drivers-x86-v5.11-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A small collection of bug-fixes and model-specific quirks"
* tag 'platform-drivers-x86-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control
platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-list
platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634
platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS check
platform/x86: thinkpad_acpi: correct palmsensor error checking
platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352
platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
platform/x86: i2c-multi-instantiate: Don't create platform device for INT3515 ACPI nodes
platform/surface: SURFACE_PLATFORMS should depend on ACPI
platform/surface: surface_gpe: Fix non-PM_SLEEP build warnings
tools/power/x86/intel-speed-select: Set higher of cpuinfo_max_freq or base_frequency
tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequency
Qais Yousef [Fri, 22 Jan 2021 11:09:09 +0000 (11:09 +0000)]
arm64: kprobes: Fix Uexpected kernel BRK exception at EL1
I was hitting the below panic continuously when attaching kprobes to
scheduler functions
[ 159.045212] Unexpected kernel BRK exception at EL1
[ 159.053753] Internal error: BRK handler:
f2000006 [#1] PREEMPT SMP
[ 159.059954] Modules linked in:
[ 159.063025] CPU: 2 PID: 0 Comm: swapper/2 Not tainted
5.11.0-rc4-00008-g1e2a199f6ccd #56
[rt-app] <notice> [1] Exiting.[ 159.071166] Hardware name: ARM Juno development board (r2) (DT)
[ 159.079689] pstate:
600003c5 (nZCv DAIF -PAN -UAO -TCO BTYPE=--)
[ 159.085723] pc : 0xffff80001624501c
[ 159.089377] lr : attach_entity_load_avg+0x2ac/0x350
[ 159.094271] sp :
ffff80001622b640
[rt-app] <notice> [0] Exiting.[ 159.097591] x29:
ffff80001622b640 x28:
0000000000000001
[ 159.105515] x27:
0000000000000049 x26:
ffff000800b79980
[ 159.110847] x25:
ffff00097ef37840 x24:
0000000000000000
[ 159.116331] x23:
00000024eacec1ec x22:
ffff00097ef12b90
[ 159.121663] x21:
ffff00097ef37700 x20:
ffff800010119170
[rt-app] <notice> [11] Exiting.[ 159.126995] x19:
ffff00097ef37840 x18:
000000000000000e
[ 159.135003] x17:
0000000000000001 x16:
0000000000000019
[ 159.140335] x15:
0000000000000000 x14:
0000000000000000
[ 159.145666] x13:
0000000000000002 x12:
0000000000000002
[ 159.150996] x11:
ffff80001592f9f0 x10:
0000000000000060
[ 159.156327] x9 :
ffff8000100f6f9c x8 :
be618290de0999a1
[ 159.161659] x7 :
ffff80096a4b1000 x6 :
0000000000000000
[ 159.166990] x5 :
ffff00097ef37840 x4 :
0000000000000000
[ 159.172321] x3 :
ffff000800328948 x2 :
0000000000000000
[ 159.177652] x1 :
0000002507d52fec x0 :
ffff00097ef12b90
[ 159.182983] Call trace:
[ 159.185433] 0xffff80001624501c
[ 159.188581] update_load_avg+0x2d0/0x778
[ 159.192516] enqueue_task_fair+0x134/0xe20
[ 159.196625] enqueue_task+0x4c/0x2c8
[ 159.200211] ttwu_do_activate+0x70/0x138
[ 159.204147] sched_ttwu_pending+0xbc/0x160
[ 159.208253] flush_smp_call_function_queue+0x16c/0x320
[ 159.213408] generic_smp_call_function_single_interrupt+0x1c/0x28
[ 159.219521] ipi_handler+0x1e8/0x3c8
[ 159.223106] handle_percpu_devid_irq+0xd8/0x460
[ 159.227650] generic_handle_irq+0x38/0x50
[ 159.231672] __handle_domain_irq+0x6c/0xc8
[ 159.235781] gic_handle_irq+0xcc/0xf0
[ 159.239452] el1_irq+0xb4/0x180
[ 159.242600] rcu_is_watching+0x28/0x70
[ 159.246359] rcu_read_lock_held_common+0x44/0x88
[ 159.250991] rcu_read_lock_any_held+0x30/0xc0
[ 159.255360] kretprobe_dispatcher+0xc4/0xf0
[ 159.259555] __kretprobe_trampoline_handler+0xc0/0x150
[ 159.264710] trampoline_probe_handler+0x38/0x58
[ 159.269255] kretprobe_trampoline+0x70/0xc4
[ 159.273450] run_rebalance_domains+0x54/0x80
[ 159.277734] __do_softirq+0x164/0x684
[ 159.281406] irq_exit+0x198/0x1b8
[ 159.284731] __handle_domain_irq+0x70/0xc8
[ 159.288840] gic_handle_irq+0xb0/0xf0
[ 159.292510] el1_irq+0xb4/0x180
[ 159.295658] arch_cpu_idle+0x18/0x28
[ 159.299245] default_idle_call+0x9c/0x3e8
[ 159.303265] do_idle+0x25c/0x2a8
[ 159.306502] cpu_startup_entry+0x2c/0x78
[ 159.310436] secondary_start_kernel+0x160/0x198
[ 159.314984] Code:
d42000c0 aa1e03e9 d42000c0 aa1e03e9 (
d42000c0)
After a bit of head scratching and debugging it turned out that it is
due to kprobe handler being interrupted by a tick that causes us to go
into (I think another) kprobe handler.
The culprit was kprobe_breakpoint_ss_handler() returning DBG_HOOK_ERROR
which leads to the Unexpected kernel BRK exception.
Reverting commit
ba090f9cafd5 ("arm64: kprobes: Remove redundant
kprobe_step_ctx") seemed to fix the problem for me.
Further analysis showed that kcb->kprobe_status is set to
KPROBE_REENTER when the error occurs. By teaching
kprobe_breakpoint_ss_handler() to handle this status I can no longer
reproduce the problem.
Fixes:
ba090f9cafd5 ("arm64: kprobes: Remove redundant kprobe_step_ctx")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210122110909.3324607-1-qais.yousef@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Peter Zijlstra [Sat, 16 Jan 2021 10:56:37 +0000 (11:56 +0100)]
sched: Relax the set_cpus_allowed_ptr() semantics
Now that we have KTHREAD_IS_PER_CPU to denote the critical per-cpu
tasks to retain during CPU offline, we can relax the warning in
set_cpus_allowed_ptr(). Any spurious kthread that wants to get on at
the last minute will get pushed off before it can run.
While during CPU online there is no harm, and actual benefit, to
allowing kthreads back on early, it simplifies hotplug code and fixes
a number of outstanding races.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lai jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103507.240724591@infradead.org
Peter Zijlstra [Tue, 12 Jan 2021 10:28:16 +0000 (11:28 +0100)]
sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
Prior to commit
1cf12e08bc4d ("sched/hotplug: Consolidate task
migration on CPU unplug") we'd leave any task on the dying CPU and
break affinity and force them off at the very end.
This scheme had to change in order to enable migrate_disable(). One
cannot wait for migrate_disable() to complete while stuck in
stop_machine(). Furthermore, since we need at the very least: idle,
hotplug and stop threads at any point before stop_machine, we can't
break affinity and/or push those away.
Under the assumption that all per-cpu kthreads are sanely handled by
CPU hotplug, the new code no long breaks affinity or migrates any of
them (which then includes the critical ones above).
However, there's an important difference between per-cpu kthreads and
kthreads that happen to have a single CPU affinity which is lost. The
latter class very much relies on the forced affinity breaking and
migration semantics previously provided.
Use the new kthread_is_per_cpu() infrastructure to tighten
is_per_cpu_kthread() and fix the hot-unplug problems stemming from the
change.
Fixes:
1cf12e08bc4d ("sched/hotplug: Consolidate task migration on CPU unplug")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103507.102416009@infradead.org
Peter Zijlstra [Wed, 20 Jan 2021 14:05:41 +0000 (15:05 +0100)]
sched: Prepare to use balance_push in ttwu()
In preparation of using the balance_push state in ttwu() we need it to
provide a reliable and consistent state.
The immediate problem is that rq->balance_callback gets cleared every
schedule() and then re-set in the balance_push_callback() itself. This
is not a reliable signal, so add a variable that stays set during the
entire time.
Also move setting it before the synchronize_rcu() in
sched_cpu_deactivate(), such that we get guaranteed visibility to
ttwu(), which is a preempt-disable region.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.966069627@infradead.org
Peter Zijlstra [Fri, 15 Jan 2021 18:08:36 +0000 (19:08 +0100)]
workqueue: Restrict affinity change to rescuer
create_worker() will already set the right affinity using
kthread_bind_mask(), this means only the rescuer will need to change
it's affinity.
Howveer, while in cpu-hot-unplug a regular task is not allowed to run
on online&&!active as it would be pushed away quite agressively. We
need KTHREAD_IS_PER_CPU to survive in that environment.
Therefore set the affinity after getting that magic flag.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.826629830@infradead.org
Peter Zijlstra [Tue, 12 Jan 2021 10:26:49 +0000 (11:26 +0100)]
workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
Mark the per-cpu workqueue workers as KTHREAD_IS_PER_CPU.
Workqueues have unfortunate semantics in that per-cpu workers are not
default flushed and parked during hotplug, however a subset does
manual flush on hotplug and hard relies on them for correctness.
Therefore play silly games..
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.693465814@infradead.org
Peter Zijlstra [Tue, 12 Jan 2021 10:24:04 +0000 (11:24 +0100)]
kthread: Extract KTHREAD_IS_PER_CPU
There is a need to distinguish geniune per-cpu kthreads from kthreads
that happen to have a single CPU affinity.
Geniune per-cpu kthreads are kthreads that are CPU affine for
correctness, these will obviously have PF_KTHREAD set, but must also
have PF_NO_SETAFFINITY set, lest userspace modify their affinity and
ruins things.
However, these two things are not sufficient, PF_NO_SETAFFINITY is
also set on other tasks that have their affinities controlled through
other means, like for instance workqueues.
Therefore another bit is needed; it turns out kthread_create_per_cpu()
already has such a bit: KTHREAD_IS_PER_CPU, which is used to make
kthread_park()/kthread_unpark() work correctly.
Expose this flag and remove the implicit setting of it from
kthread_create_on_cpu(); the io_uring usage of it seems dubious at
best.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.557620262@infradead.org
Peter Zijlstra [Fri, 15 Jan 2021 17:17:45 +0000 (18:17 +0100)]
sched: Don't run cpu-online with balance_push() enabled
We don't need to push away tasks when we come online, mark the push
complete right before the CPU dies.
XXX hotplug state machine has trouble with rollback here.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.415606087@infradead.org
Lai Jiangshan [Mon, 11 Jan 2021 15:26:33 +0000 (23:26 +0800)]
workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
The scheduler won't break affinity for us any more, and we should
"emulate" the same behavior when the scheduler breaks affinity for
us. The behavior is "changing the cpumask to cpu_possible_mask".
And there might be some other CPUs online later while the worker is
still running with the pending work items. The worker should be allowed
to use the later online CPUs as before and process the work items ASAP.
If we use cpu_active_mask here, we can't achieve this goal but
using cpu_possible_mask can.
Fixes:
06249738a41a ("workqueue: Manually break affinity on hotplug")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210111152638.2417-4-jiangshanlai@gmail.com
Valentin Schneider [Wed, 13 Jan 2021 18:31:41 +0000 (18:31 +0000)]
sched/core: Print out straggler tasks in sched_cpu_dying()
Since commit
1cf12e08bc4d ("sched/hotplug: Consolidate task migration on CPU unplug")
tasks are expected to move themselves out of a out-going CPU. For most
tasks this will be done automagically via BALANCE_PUSH, but percpu kthreads
will have to cooperate and move themselves away one way or another.
Currently, some percpu kthreads (workqueues being a notable exemple) do not
cooperate nicely and can end up on an out-going CPU at the time
sched_cpu_dying() is invoked.
Print the dying rq's tasks to shed some light on the stragglers.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210113183141.11974-1-valentin.schneider@arm.com
Linus Torvalds [Thu, 21 Jan 2021 18:04:27 +0000 (10:04 -0800)]
tty: fix up hung_up_tty_write() conversion
In commit "tty: implement write_iter", I left the write_iter conversion
of the hung up tty case alone, because I incorrectly thought it didn't
matter.
Jiri showed me the errors of my ways, and pointed out the problems with
that incomplete conversion. Fix it all up.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Sun, 17 Jan 2021 11:43:13 +0000 (12:43 +0100)]
i2c: sprd: depend on COMMON_CLK to fix compile tests
The I2C_SPRD uses Common Clock Framework thus it cannot be built on
platforms without it (e.g. compile test on MIPS with LANTIQ):
/usr/bin/mips-linux-gnu-ld: drivers/i2c/busses/i2c-sprd.o: in function `sprd_i2c_probe':
i2c-sprd.c:(.text.sprd_i2c_probe+0x254): undefined reference to `clk_set_parent'
Fixes:
4a2d5f663dab ("i2c: Enable compile testing for more drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fabio Estevam [Wed, 20 Jan 2021 02:41:23 +0000 (23:41 -0300)]
Revert "i2c: imx: Remove unused .id_table support"
Coldfire platforms are non-DT users of this driver, so
keep the .id_table support.
This reverts commit
c610199cd392e6e2d41811ef83d85355c1b862b3.
Fixes:
c610199cd392 (i2c: imx: Remove unused .id_table support")
Reported-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Linus Torvalds [Fri, 22 Jan 2021 02:35:02 +0000 (18:35 -0800)]
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC fixes from Stafford Horne:
- Compiler warning fixup for new Litex SoC driver
- Sparse warning fixup for iounmap
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: io: Add missing __iomem annotation to iounmap()
soc: litex: Fix compile warning when device tree is not configured
Linus Torvalds [Fri, 22 Jan 2021 01:16:10 +0000 (17:16 -0800)]
Merge tag 'drm-fixes-2021-01-22' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes pull, nothing too major in here, just some core fixes,
one vc4, bunch of i915 and a bunch of amdgpu.
core:
- atomic: Release state on error
- syncobj: Fix use-after-free
- ttm: Don't use GFP_TRANSHUGE_LIGTH
- vram-helper: Fix memory leak in vmap
vc4:
- Unify driver naming for PCM
i915:
- HDCP fixes
- PMU wakeref fix
- Fix HWSP validity race
- Fix DP protocol converter accidental 4:4:4->4:2:0 conversion for RGB
amdgpu:
- Green Sardine fixes
- Vangogh fixes
- Renoir fixes
- Misc display fixes"
* tag 'drm-fixes-2021-01-22' of git://anongit.freedesktop.org/drm/drm: (21 commits)
drm/amdgpu: update mmhub mgcg&ls for mmhub_v2_3
drm/amdgpu: modify GCR_GENERAL_CNTL for Vangogh
drm/amdgpu/pm: no need GPU status set since mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL added in FSDL
drm/amd/display: Fixed corruptions on HPDRX link loss restore
drm/amd/display: Use hardware sequencer functions for PG control
drm/amd/display: Change function decide_dp_link_settings to avoid infinite looping
drm/amd/display: Allow PSTATE chnage when no displays are enabled
drm/amd/display: Update dram_clock_change_latency for DCN2.1
drm/amdgpu: remove gpu info firmware of green sardine
drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM Case
drm/syncobj: Fix use-after-free
drm/vram-helper: Reuse existing page mappings in vmap
drm/atomic: put state on error path
drm/i915: Only enable DFP 4:4:4->4:2:0 conversion when outputting YCbCr 4:4:4
drm/i915: Check for rq->hwsp validity after acquiring RCU lock
drm/i915/pmu: Don't grab wakeref when enabling events
drm/i915/gt: Prevent use of engine->wa_ctx after error
drm/vc4: Unify PCM card's driver_name
drm/ttm: stop using GFP_TRANSHUGE_LIGHT
drm/i915/hdcp: Get conn while content_type changed
...
Dave Airlie [Thu, 21 Jan 2021 23:43:20 +0000 (09:43 +1000)]
Merge tag 'amd-drm-fixes-5.11-2021-01-21' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.11-2021-01-21:
amdgpu:
- Green Sardine fixes
- Vangogh fixes
- Renoir fixes
- Misc display fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121160129.3981-1-alexander.deucher@amd.com
Dave Airlie [Thu, 21 Jan 2021 23:28:22 +0000 (09:28 +1000)]
Merge tag 'drm-intel-fixes-2021-01-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.11-rc5:
- HDCP fixes
- PMU wakeref fix
- Fix HWSP validity race
- Fix DP protocol converter accidental 4:4:4->4:2:0 conversion for RGB
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a6t2kzgb.fsf@intel.com
Dave Airlie [Thu, 21 Jan 2021 23:19:20 +0000 (09:19 +1000)]
Merge tag 'drm-misc-fixes-2021-01-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull (less than what git shortlog provides):
* drm/atomic: Release state on error
* drm/syncobj: Fix use-after-free
* drm/ttm: Don't use GFP_TRANSHUGE_LIGTH
* drm/vc4: Unify driver naming for PCM
* drm/vram-helper: Fix memory leak in vmap
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YAgdYGNoH7pC29rz@linux-uq9g
Gayatri Kammela [Thu, 21 Jan 2021 21:50:04 +0000 (13:50 -0800)]
x86/cpu: Add another Alder Lake CPU to the Intel family
Add Alder Lake mobile CPU model number to Intel family.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210121215004.11618-1-tony.luck@intel.com
Josh Poimboeuf [Thu, 14 Jan 2021 22:14:01 +0000 (16:14 -0600)]
objtool: Don't fail on missing symbol table
Thanks to a recent binutils change which doesn't generate unused
symbols, it's now possible for thunk_64.o be completely empty without
CONFIG_PREEMPTION: no text, no data, no symbols.
We could edit the Makefile to only build that file when
CONFIG_PREEMPTION is enabled, but that will likely create confusion
if/when the thunks end up getting used by some other code again.
Just ignore it and move on.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1254
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Josh Poimboeuf [Thu, 14 Jan 2021 22:32:42 +0000 (16:32 -0600)]
objtool: Don't fail the kernel build on fatal errors
This is basically a revert of commit
644592d32837 ("objtool: Fail the
kernel build on fatal errors").
That change turned out to be more trouble than it's worth. Failing the
build is an extreme measure which sometimes gets too much attention and
blocks CI build testing.
These fatal-type warnings aren't yet as rare as we'd hope, due to the
ever-increasing matrix of supported toolchains/plugins and their
fast-changing nature as of late.
Also, there are more people (and bots) looking for objtool warnings than
ever before, so even non-fatal warnings aren't likely to be ignored for
long.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Jin Yao [Wed, 9 Dec 2020 00:58:28 +0000 (08:58 +0800)]
perf script: Fix overrun issue for dynamically-allocated PMU type number
When unpacking the event which is from dynamic PMU, the array
output[OUTPUT_TYPE_MAX] may be overrun. For example, type number of SKL
uncore_imc is 10, but OUTPUT_TYPE_MAX is 7 now (OUTPUT_TYPE_MAX =
PERF_TYPE_MAX + 1).
/* In builtin-script.c */
process_event()
{
unsigned int type = output_type(attr->type);
if (output[type].fields == 0)
return;
}
output[10] is overrun.
Create a type OUTPUT_TYPE_OTHER for dynamic PMU events, then
output_type(attr->type) will return OUTPUT_TYPE_OTHER here.
Note that if PERF_TYPE_MAX ever changed, then there would be a conflict
between old perf.data files that had a dynamicaliy allocated PMU number
that would then be the same as a fixed PERF_TYPE.
Example:
# perf record --switch-events -C 0 -e "{cpu-clock,uncore_imc/data_reads/,uncore_imc/data_writes/}:SD" -a -- sleep 1
# perf script
Before:
swapper 0 [000]
1479253.987551: 277766 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000]
1479253.987797: 246709 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000]
1479253.988127: 329883 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000]
1479253.988273: 146393 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000]
1479253.988523: 249977 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000]
1479253.988877: 354090 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000]
1479253.989023: 145940 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000]
1479253.989383: 359856 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000]
1479253.989523: 140082 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
After:
swapper 0 [000]
1397040.402011: 272384 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000]
1397040.402011: 5396 uncore_imc/data_reads/:
swapper 0 [000]
1397040.402011: 967 uncore_imc/data_writes/:
swapper 0 [000]
1397040.402259: 249153 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000]
1397040.402259: 7231 uncore_imc/data_reads/:
swapper 0 [000]
1397040.402259: 1297 uncore_imc/data_writes/:
swapper 0 [000]
1397040.402508: 249108 cpu-clock:
ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
swapper 0 [000]
1397040.402508: 5333 uncore_imc/data_reads/:
swapper 0 [000]
1397040.402508: 1008 uncore_imc/data_writes/:
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20201209005828.21302-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
John Garry [Tue, 19 Jan 2021 10:04:15 +0000 (18:04 +0800)]
perf metricgroup: Fix system PMU metrics
Joakim reports that getting "perf stat" for multiple system PMU metrics
segfaults:
$ perf stat -a -I 1000 -M imx8mm_ddr_write.all,imx8mm_ddr_write.all
Segmentation fault
$
While the same works without issue for a single metric.
The logic in metricgroup__add_metric_sys_event_iter() is broken, in that
add_metric() @m argument should be NULL for each new metric. Fix by not
passing a holder for that, and rather make local in
metricgroup__add_metric_sys_event_iter().
Fixes:
be335ec28efa ("perf metricgroup: Support adding metrics for system PMUs")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611050655-44020-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
John Garry [Wed, 20 Jan 2021 16:18:38 +0000 (00:18 +0800)]
perf metricgroup: Fix for metrics containing duration_time
Metrics containing duration_time cause a segfault:
$ perf stat -v -M L1D_Cache_Fill_BW sleep 1
Using CPUID GenuineIntel-6-3D-4
metric expr 64 * l1d.replacement /
1000000000 / duration_time for L1D_Cache_Fill_BW
found event duration_time
found event l1d.replacement
adding {l1d.replacement}:W,duration_time
l1d.replacement -> cpu/umask=0x1,(null)=0x1e8483,event=0x51/
Segmentation fault
$
In commit
c2337d67199a1ea1 ("perf metricgroup: Fix metrics using aliases
covering multiple PMUs"), the logic in find_evsel_group() when iter'ing
events was changed to not only select events in same group, but also for
aliased PMUs.
Checking whether events were for aliased PMUs was done by comparing the
event PMU name. This was not safe for duration_time event, which has no
associated PMU (and no PMU name), so fix by checking if the event PMU name
is set also.
Committer testing:
Reproduced the bug, then, on a:
$ grep -m1 ^'model name' /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
$
We now get:
$ perf stat -M L1D_Cache_Fill_BW sleep 1
Performance counter stats for 'sleep 1':
4,141 l1d.replacement:u
1,001,285,107 ns duration_time:u
1.
001285107 seconds time elapsed
0.
000000000 seconds user
0.
001119000 seconds sys
$
Detais from -v:
Using CPUID GenuineIntel-6-8E-A
metric expr 64 * l1d.replacement /
1000000000 / duration_time for L1D_Cache_Fill_BW
found event duration_time
found event l1d.replacement
adding {l1d.replacement}:W,duration_time
l1d.replacement -> cpu/(null)=0x1e8483,umask=0x1,event=0x51/
Control descriptor is not initialized
Warning:
kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor samples
Warning:
kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor samples
l1d.replacement:u: 4592 612201 612201
duration_time:u:
1001478621 1001478621 1001478621
Fixes:
c2337d67199a1ea1 ("perf metricgroup: Fix metrics using aliases covering multiple PMUs")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611159518-226883-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 21 Jan 2021 12:54:46 +0000 (14:54 +0200)]
perf evlist: Fix id index for heterogeneous systems
perf_evlist__set_sid_idx() updates perf_sample_id with the evlist map
index, CPU number and TID. It is passed indexes to the evsel's cpu and
thread maps, but references the evlist's maps instead. That results in
using incorrect CPU numbers on heterogeneous systems. Fix it by using
evsel maps.
The id index (PERF_RECORD_ID_INDEX) is used by AUX area tracing when in
sampling mode. Having an incorrect CPU number causes the trace data to
be attributed to the wrong CPU, and can result in decoder errors because
the trace data is then associated with the wrong process.
Committer notes:
Keep the class prefix convention in the function name, switching from
perf_evlist__set_sid_idx() to perf_evsel__set_sid_idx().
Fixes:
3c659eedada2fbf9 ("perf tools: Add id index")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210121125446.11287-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hannes Reinecke [Thu, 21 Jan 2021 17:50:56 +0000 (18:50 +0100)]
dm: avoid filesystem lookup in dm_get_dev_t()
This reverts commit
644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()")
dm_get_dev_t() is just used to convert an arbitrary 'path' string
into a dev_t. It doesn't presume that the device is present; that
check will be done later, as the only caller is dm_get_device(),
which does a dm_get_table_device() later on, which will properly
open the device.
So if the path string already _is_ in major:minor representation
we can convert it directly, avoiding a recursion into the filesystem
to lookup the block device.
This avoids a hang in multipath_message() when the filesystem is
inaccessible.
Fixes:
644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()")
Cc: stable@vger.kernel.org
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Ignat Korchagin [Tue, 19 Jan 2021 20:40:15 +0000 (20:40 +0000)]
dm crypt: fix copy and paste bug in crypt_alloc_req_aead
In commit
d68b29584c25 ("dm crypt: use GFP_ATOMIC when allocating
crypto requests from softirq") code was incorrectly copy and pasted
from crypt_alloc_req_skcipher()'s crypto request allocation code to
crypt_alloc_req_aead(). It is OK from runtime perspective as both
simple encryption request pointer and AEAD request pointer are part of
a union, but may confuse code reviewers.
Fixes:
d68b29584c25 ("dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Mikulas Patocka [Wed, 20 Jan 2021 18:59:11 +0000 (13:59 -0500)]
dm integrity: conditionally disable "recalculate" feature
Otherwise a malicious user could (ab)use the "recalculate" feature
that makes dm-integrity calculate the checksums in the background
while the device is already usable. When the system restarts before all
checksums have been calculated, the calculation continues where it was
interrupted even if the recalculate feature is not requested the next
time the dm device is set up.
Disable recalculating if we use internal_hash or journal_hash with a
key (e.g. HMAC) and we don't have the "legacy_recalculate" flag.
This may break activation of a volume, created by an older kernel,
that is not yet fully recalculated -- if this happens, the user should
add the "legacy_recalculate" flag to constructor parameters.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Linus Torvalds [Thu, 21 Jan 2021 19:45:40 +0000 (11:45 -0800)]
Merge tag 'fs_for_v5.11-rc5' of git://git./linux/kernel/git/jack/linux-fs
Pull fs and udf fixes from Jan Kara:
"A lazytime handling fix from Eric Biggers and a fix of UDF session
handling for large devices"
* tag 'fs_for_v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: fix the problem that the disc content is not displayed
fs: fix lazytime expiration handling in __writeback_single_inode()
Mikulas Patocka [Wed, 20 Jan 2021 11:02:31 +0000 (06:02 -0500)]
dm integrity: fix a crash if "recalculate" used without "internal_hash"
Recalculate can only be specified with internal_hash.
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Linus Torvalds [Thu, 21 Jan 2021 19:37:22 +0000 (11:37 -0800)]
Merge tag 'printk-for-5.11-printk-rework-fixup' of git://git./linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Fix line counting and buffer size calculation. Both regressions
caused that a reader buffer might not get filled as much as possible.
- Restore non-documented behavior of printk() reader API and make it
official.
It did not fill the last byte of the provided buffer before 5.10. Two
architectures, powerpc and um, used it to add the trailing '\0'.
There might theoretically be more callers depending on this behavior
in userspace.
* tag 'printk-for-5.11-printk-rework-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: fix buffer overflow potential for print_text()
printk: fix kmsg_dump_get_buffer length calulations
printk: ringbuffer: fix line counting
Linus Torvalds [Thu, 21 Jan 2021 19:28:30 +0000 (11:28 -0800)]
Merge tag 'acpi-5.11-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Modify a helper function in the ACPI core to match the behavior
expected by its users so as to prevent NULL pointer dereferences and
occasional memory corruption from occurring (Hans de Goede)"
* tag 'acpi-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Make acpi_bus_get_device() clear return pointer on error
Linus Torvalds [Thu, 21 Jan 2021 19:25:35 +0000 (11:25 -0800)]
Merge tag 'sound-5.11-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of sound fixes targeted for 5.11-rc5. Most
notably, USB-audio still got a few intensive changes for covering the
regressions while the rest are all small fixes.
- A trivial fix for sequencer OSS emulation error path
- HD-audio runtime PM regression fix, a few quirks and new IDs
- USB-audio regression fixes for Pioneer device, Logitech webcams,
etc
- ASoC SOF Intel coverage
- MAINTAINERS file update
- A fix in the jack handling in ASoC HDMI codec"
* tag 'sound-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Fix hw constraints dependencies
ALSA: hda: Balance runtime/system PM if direct-complete is disabled
ALSA: usb-audio: Avoid implicit feedback on Pioneer devices
ALSA: usb-audio: Set sample rate for all sharing EPs on UAC1
ALSA: usb-audio: Fix UAC1 rate setup for secondary endpoints
MAINTAINERS: update qcom ASoC drivers list
MAINTAINERS: update maintainers of qcom audio
ALSA: hda: Add Cometlake-R PCI ID
ALSA: seq: oss: Fix missing error check in snd_seq_oss_synth_make_info()
ALSA: hda/via: Add minimum mute flag
ALSA: hda/realtek - Limit int mic boost on Acer Aspire E5-575T
ALSA: usb-audio: Always apply the hw constraints for implicit fb sync
ASoC: SOF: Intel: fix page fault at probe if i915 init fails
ALSA: hda: Add AlderLake-P PCI ID and HDMI codec vid
ASoC: SOF: Intel: hda: Avoid checking jack on system suspend
ASoC: SOF: Intel: hda: Modify existing helper to disable WAKEEN
ASoC: SOF: Intel: hda: Resume codec to do jack detection
MAINTAINERS: update references to stm32 audio bindings
ASoC: hdmi-codec: Fix return value in hdmi_codec_set_jack()
Linus Torvalds [Thu, 21 Jan 2021 19:19:59 +0000 (11:19 -0800)]
Merge tag 'gpio-fixes-for-v5.11-rc5' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- rework the character device code to avoid a frame size warning
- fix printk format issues in gpio-tools
- warn on redefinition of the to_irq callback in core gpiolib code
- fix PWM period calculation in gpio-mvebu
- make gpio-sifive Kconfig entry consistent with other drivers
- fix a build issue in gpio-tegra
* tag 'gpio-fixes-for-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tegra: Add missing dependencies
gpio: sifive: select IRQ_DOMAIN_HIERARCHY rather than depend on it
gpio: mvebu: fix pwm .get_state period calculation
gpiolib: add a warning on gpiochip->to_irq defined
tools: gpio: fix %llu warning in gpio-watch.c
tools: gpio: fix %llu warning in gpio-event-mon.c
gpiolib: cdev: fix frame size warning in gpio_ioctl()
Linus Torvalds [Thu, 21 Jan 2021 19:14:24 +0000 (11:14 -0800)]
Merge tag 'pinctrl-v5.11-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"These are all driver fixes, the Qualcomm stuff is the most widely used
and important:
- The main matter is a complicated fixup for the Qualcomm deep sleep
states.
This manifests in how interrupts get handled or in some cases not
handled in cooperation with the PDC (Power Domain Controller). It's
one of these really hardcore bug fixes that signifies high maturity
of the platform.
- Fix a register layout problem in the JZ4760 driver
- Fix a register offset in the Aspeed G6 driver
- Fix a compiler warning in the Nomadik driver
- Fix a fallback code path in the mediatek driver"
* tag 'pinctrl-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Don't clear pending interrupts when enabling
pinctrl: qcom: Properly clear "intr_ack_high" interrupts when unmasking
pinctrl: qcom: No need to read-modify-write the interrupt status
pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0
pinctrl: mediatek: Fix fallback call path
pinctrl: nomadik: Remove unused variable in nmk_gpio_dbg_show_one
pinctrl: aspeed: g6: Fix PWMG0 pinctrl setting
pinctrl: ingenic: Rename registers from JZ4760_GPIO_* to JZ4770_GPIO_*
pinctrl: ingenic: Fix JZ4760 support
Saravana Kannan [Sun, 10 Jan 2021 17:54:07 +0000 (09:54 -0800)]
driver core: Fix device link device name collision
The device link device's name was of the form:
<supplier-dev-name>--<consumer-dev-name>
This can cause name collision as reported here [1] as device names are
not globally unique. Since device names have to be unique within the
bus/class, add the bus/class name as a prefix to the device names used to
construct the device link device name.
So the devuce link device's name will be of the form:
<supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name>
[1] - https://lore.kernel.org/lkml/
20201229033440.32142-1-michael@walle.cc/
Fixes:
287905e68dd2 ("driver core: Expose device link details in sysfs")
Cc: stable@vger.kernel.org
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210110175408.1465657-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Fri, 15 Jan 2021 18:30:51 +0000 (19:30 +0100)]
driver core: Extend device_is_dependent()
If the device passed as the target (second argument) to
device_is_dependent() is not completely registered (that is, it has
been initialized, but not added yet), but the parent pointer of it
is set, it may be missing from the list of the parent's children
and device_for_each_child() called by device_is_dependent() cannot
be relied on to catch that dependency.
For this reason, modify device_is_dependent() to check the ancestors
of the target device by following its parent pointer in addition to
the device_for_each_child() walk.
Fixes:
9ed9895370ae ("driver core: Functional dependencies tracking support")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/17705994.d592GUb2YH@kreacher
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Wed, 20 Jan 2021 20:46:31 +0000 (21:46 +0100)]
kernfs: wire up ->splice_read and ->splice_write
Wire up the splice_read and splice_write methods to the default
helpers using ->read_iter and ->write_iter now that those are
implemented for kernfs. This restores support to use splice and
sendfile on kernfs files.
Fixes:
36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Reported-by: Siddharth Gupta <sidgup@codeaurora.org>
Tested-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-4-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Wed, 20 Jan 2021 20:46:30 +0000 (21:46 +0100)]
kernfs: implement ->write_iter
Switch kernfs to implement the write_iter method instead of plain old
write to prepare to supporting splice and sendfile again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-3-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Wed, 20 Jan 2021 20:46:29 +0000 (21:46 +0100)]
kernfs: implement ->read_iter
Switch kernfs to implement the read_iter method instead of plain old
read to prepare to supporting splice and sendfile again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-2-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Wed, 20 Jan 2021 13:49:07 +0000 (14:49 +0100)]
libceph: fix "Boolean result is used in bitwise operation" warning
This line dates back to 2013, but cppcheck complained because commit
2f713615ddd9 ("libceph: move msgr1 protocol implementation to its own
file") moved it. Add parenthesis to silence the warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Aaron Liu [Mon, 18 Jan 2021 09:05:00 +0000 (17:05 +0800)]
drm/amdgpu: update mmhub mgcg&ls for mmhub_v2_3
Starting from vangogh, the ATCL2 and DAGB0 registers relative
to mgcg/ls has changed.
For MGCG:
Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL.
For MGLS:
Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL.
Add DAGB0_(WR/RD)_CGTT_CLK_CTRL registers.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jinzhou Su [Mon, 18 Jan 2021 11:14:27 +0000 (19:14 +0800)]
drm/amdgpu: modify GCR_GENERAL_CNTL for Vangogh
GCR_GENERAL_CNTL is defined differently in gc_10_1_0_offset.h and
gc_10_3_0_offset.h. Update GCR_GENERAL_CNTL for Vangogh.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Thu, 17 Dec 2020 05:55:46 +0000 (13:55 +0800)]
drm/amdgpu/pm: no need GPU status set since mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL added in FSDL
In the renoir there is no need GpuChangeState message set to exit gfxoff in the s0i3 resume since
mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL has been added in the s0i3 FSDL.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Vladimir Stempen [Mon, 4 Jan 2021 17:05:26 +0000 (12:05 -0500)]
drm/amd/display: Fixed corruptions on HPDRX link loss restore
[why]
Heavy corruption or blank screen reported on wake,
with 6k display connected and FEC enabled
[how]
When Disable/Enable stream for display pipes on HPDRX,
DC should take into account ODM split pipes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Sun, 13 Dec 2020 15:59:01 +0000 (10:59 -0500)]
drm/amd/display: Use hardware sequencer functions for PG control
[Why & How]
These can differ per ASIC or not be present. Don't call the dcn20 ones
directly but rather the ones defined by the ASIC init table.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bing Guo [Mon, 4 Jan 2021 19:09:41 +0000 (14:09 -0500)]
drm/amd/display: Change function decide_dp_link_settings to avoid infinite looping
Why:
Function decide_dp_link_settings() loops infinitely when required bandwidth
can't be supported.
How:
Check the required bandwidth against verified_link_cap before trying to
find a link setting for it.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Thu, 29 Oct 2020 21:45:19 +0000 (17:45 -0400)]
drm/amd/display: Allow PSTATE chnage when no displays are enabled
[Why]
When no displays are currently enabled, display driver should not
disallow PSTATE switching.
[How]
Allow PSTATE switching if either the active configuration supports it,
or there are no active displays.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jake Wang [Fri, 8 Jan 2021 17:27:51 +0000 (12:27 -0500)]
drm/amd/display: Update dram_clock_change_latency for DCN2.1
[WHY]
dram clock change latencies get updated using ddr4 latency table, but
that update does not happen before validation. This value
should not be the default and should be number received from
df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks
such as on 1080p 360hz or 300hz panels.
[HOW]
Update latency from 23.84 to 11.72.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 19 Jan 2021 05:35:21 +0000 (13:35 +0800)]
drm/amdgpu: remove gpu info firmware of green sardine
The ip discovery is supported on green sardine, it doesn't need gpu info
firmware anymore.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
Sung Lee [Tue, 5 Jan 2021 19:32:29 +0000 (14:32 -0500)]
drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM Case
[WHY]
Previously as MPO + ODM Combine was not supported, finding secondary pipes
for each case was mutually exclusive. Now that both are supported at the same
time, both cases should be taken into account when finding a secondary pipe.
[HOW]
If a secondary pipe cannot be found based on previous bottom pipe,
search for a second pipe using next_odm_pipe instead.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
Petr Mladek [Thu, 21 Jan 2021 15:06:21 +0000 (16:06 +0100)]
Merge branch 'printk-rework' into for-linus
Andy Lutomirski [Thu, 21 Jan 2021 05:09:49 +0000 (21:09 -0800)]
x86/mmx: Use KFPU_387 for MMX string operations
The default kernel_fpu_begin() doesn't work on systems that support XMM but
haven't yet enabled CR4.OSFXSR. This causes crashes when _mmx_memcpy() is
called too early because LDMXCSR generates #UD when the aforementioned bit
is clear.
Fix it by using kernel_fpu_begin_mask(KFPU_387) explicitly.
Fixes:
7ad816762f9b ("x86/fpu: Reset MXCSR to default in kernel_fpu_begin()")
Reported-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl>
Tested-by: Krzysztof Mazur <krzysiek@podlesie.net>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/e7bf21855fe99e5f3baa27446e32623358f69e8d.1611205691.git.luto@kernel.org
Andy Lutomirski [Thu, 21 Jan 2021 05:09:48 +0000 (21:09 -0800)]
x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
Currently, requesting kernel FPU access doesn't distinguish which parts of
the extended ("FPU") state are needed. This is nice for simplicity, but
there are a few cases in which it's suboptimal:
- The vast majority of in-kernel FPU users want XMM/YMM/ZMM state but do
not use legacy 387 state. These users want MXCSR initialized but don't
care about the FPU control word. Skipping FNINIT would save time.
(Empirically, FNINIT is several times slower than LDMXCSR.)
- Code that wants MMX doesn't want or need MXCSR initialized.
_mmx_memcpy(), for example, can run before CR4.OSFXSR gets set, and
initializing MXCSR will fail because LDMXCSR generates an #UD when the
aforementioned CR4 bit is not set.
- Any future in-kernel users of XFD (eXtended Feature Disable)-capable
dynamic states will need special handling.
Add a more specific API that allows callers to specify exactly what they
want.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl>
Link: https://lkml.kernel.org/r/aff1cac8b8fc7ee900cf73e8f2369966621b053f.1611205691.git.luto@kernel.org
Greg Kroah-Hartman [Thu, 21 Jan 2021 08:37:00 +0000 (09:37 +0100)]
Merge
9bb48c82aced ("tty: implement write_iter") into tty-linus
We want the single "splice/sendfile to a tty" regression fix into
tty-linus so it can get into 5.11-final, while the larger patch series
fixing "splice/sendfile from a tty" should wait for 5.12-rc1 so that we
get more testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Levi Yun [Wed, 20 Jan 2021 12:28:18 +0000 (21:28 +0900)]
mm/memblock: Fix typo in comment of memblock_phys_alloc_try_nid()
memblock_phys_alloc_try_nid function's comments has typo NUMA as MUMA.
Correct this typo.
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Linus Torvalds [Tue, 19 Jan 2021 19:41:16 +0000 (11:41 -0800)]
tty: implement write_iter
This makes the tty layer use the .write_iter() function instead of the
traditional .write() functionality.
That allows writev(), but more importantly also makes it possible to
enable .splice_write() for ttys, reinstating the "splice to tty"
functionality that was lost in commit
36e2c7421f02 ("fs: don't allow
splice read/write without explicit ops").
Fixes:
36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Reported-by: Oliver Giles <ohw.giles@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miquel Raynal [Tue, 19 Jan 2021 15:55:10 +0000 (16:55 +0100)]
mtd: rawnand: omap: Use BCH private fields in the specific OOB layout
The OMAP driver may leverage software BCH logic to locate errors while
using its own hardware to detect the presence of errors. This is
achieved with a "mixed" mode which initializes manually the software
BCH internal logic while providing its own OOB layout.
The issue here comes from the fact that the BCH driver has been
updated to only use generic NAND objects, and no longer depend on raw
NAND structures as it is usable from SPI-NAND as well. However, at the
end of the BCH context initialization, the driver checks the validity
of the OOB layout. At this stage, the raw NAND fields have not been
populated yet while being used by the layout helpers, leading to an
invalid layout.
The chosen solution here is to include the BCH structure definition
and to refer to the BCH fields directly (de-referenced as a const
pointer here) to know as early as possible the number of steps and ECC
bytes which have been chosen.
Note: I don't know which commit exactly triggered the error, but the
entire migration to a generic BCH driver got merged in one go, so this
should not be a problem for stable backports.
Reported-by: Adam Ford <aford173@gmail.com>
Fixes:
80fe603160a4 ("mtd: nand: ecc-bch: Stop using raw NAND structures")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit-28.dts
Link: https://lore.kernel.org/linux-mtd/20210119155510.5655-1-miquel.raynal@bootlin.com
Linus Torvalds [Wed, 20 Jan 2021 22:15:33 +0000 (14:15 -0800)]
Merge tag 'for-5.11-rc4-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more one line fixes for various bugs, stable material.
- fix send when emitting clone operation from the same file and root
- fix double free on error when cleaning backrefs
- lockdep fix during relocation
- handle potential error during reloc when starting transaction
- skip running delayed refs during commit (leftover from code removal
in this dev cycle)"
* tag 'for-5.11-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't clear ret in btrfs_start_dirty_block_groups
btrfs: fix lockdep splat in btrfs_recover_relocation
btrfs: do not double free backref nodes on error
btrfs: don't get an EINTR during drop_snapshot for reloc
btrfs: send: fix invalid clone operations when cloning from the same file and root
btrfs: no need to run delayed refs after commit_fs_roots during commit
Takashi Iwai [Wed, 20 Jan 2021 20:45:54 +0000 (21:45 +0100)]
ALSA: usb-audio: Fix hw constraints dependencies
Since the recent refactoring, it's been reported that some USB-audio
devices (typically webcams) are no longer detected properly by
PulseAudio. The debug session revealed that it's failing at probing
by PA to try the sample rate 44.1kHz while the device has discrete
sample rates other than 44.1kHz. But the puzzle was that arecord
works as is, and some other devices with the discrete rates work,
either.
After all, this turned out to be the lack of the dependencies in a few
hw constraint rules: snd_pcm_hw_rule_add() has the (variable)
arguments specifying the dependent parameters, and some functions
didn't set the target parameter itself as the dependencies. This
resulted in an invalid parameter that could be generated only in a
certain call pattern. This bug itself has been present in the code,
but it didn't trigger errors just because the rules were casually
avoiding such a corner case. After the recent refactoring and
cleanup, however, the hw constraints work "as expected", and the
problem surfaced now.
For fixing the problem above, this patch adds the missing dependent
parameters to each snd_pcm_hw_rule() call.
Fixes:
bc4e94aa8e72 ("ALSA: usb-audio: Handle discrete rates properly in hw constraints")
BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1181014
Link: https://lore.kernel.org/r/20210120204554.30177-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Wed, 20 Jan 2021 19:52:21 +0000 (11:52 -0800)]
Merge tag 'net-5.11-rc5' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.11-rc5, including fixes from bpf, wireless, and
can trees.
Current release - regressions:
- nfc: nci: fix the wrong NCI_CORE_INIT parameters
Current release - new code bugs:
- bpf: allow empty module BTFs
Previous releases - regressions:
- bpf: fix signed_{sub,add32}_overflows type handling
- tcp: do not mess with cloned skbs in tcp_add_backlog()
- bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach
- bpf: don't leak memory in bpf getsockopt when optlen == 0
- tcp: fix potential use-after-free due to double kfree()
- mac80211: fix encryption issues with WEP
- devlink: use right genl user_ptr when handling port param get/set
- ipv6: set multicast flag on the multicast route
- tcp: fix TCP_USER_TIMEOUT with zero window
Previous releases - always broken:
- bpf: local storage helpers should check nullness of owner ptr passed
- mac80211: fix incorrect strlen of .write in debugfs
- cls_flower: call nla_ok() before nla_next()
- skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too"
* tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net: systemport: free dev before on error path
net: usb: cdc_ncm: don't spew notifications
net: mscc: ocelot: Fix multicast to the CPU port
tcp: Fix potential use-after-free due to double kfree()
bpf: Fix signed_{sub,add32}_overflows type handling
can: peak_usb: fix use after free bugs
can: vxcan: vxcan_xmit: fix use after free bug
can: dev: can_restart: fix use after free bug
tcp: fix TCP socket rehash stats mis-accounting
net: dsa: b53: fix an off by one in checking "vlan->vid"
tcp: do not mess with cloned skbs in tcp_add_backlog()
selftests: net: fib_tests: remove duplicate log test
net: nfc: nci: fix the wrong NCI_CORE_INIT parameters
sh_eth: Fix power down vs. is_opened flag ordering
net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled
netfilter: rpfilter: mask ecn bits before fib lookup
udp: mask TOS bits in udp_v4_early_demux()
xsk: Clear pool even for inactive queues
bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
sh_eth: Make PHY access aware of Runtime PM to fix reboot crash
...
Linus Torvalds [Wed, 20 Jan 2021 19:46:38 +0000 (11:46 -0800)]
Merge tag 'for-linus-5.11-rc5-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for build failure showing up in some configurations"
* tag 'for-linus-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix 'nopvspin' build error
Tianjia Zhang [Tue, 19 Jan 2021 00:13:19 +0000 (00:13 +0000)]
X.509: Fix crash caused by NULL pointer
On the following call path, `sig->pkey_algo` is not assigned
in asymmetric_key_verify_signature(), which causes runtime
crash in public_key_verify_signature().
keyctl_pkey_verify
asymmetric_key_verify_signature
verify_signature
public_key_verify_signature
This patch simply check this situation and fixes the crash
caused by NULL pointer.
Fixes:
215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Reported-by: Tobias Markus <tobias@markus-regensburg.de>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: João Fonseca <jpedrofonseca@ua.pt>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Wed, 20 Jan 2021 16:11:12 +0000 (16:11 +0000)]
cachefiles: Drop superfluous readpages aops NULL check
After the recent actions to convert readpages aops to readahead, the
NULL checks of readpages aops in cachefiles_read_or_alloc_page() may
hit falsely. More badly, it's an ASSERT() call, and this panics.
Drop the superfluous NULL checks for fixing this regression.
[DH: Note that cachefiles never actually used readpages, so this check was
never actually necessary]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208883
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175245
Fixes:
9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hans de Goede [Fri, 15 Jan 2021 21:57:52 +0000 (22:57 +0100)]
ACPI: scan: Make acpi_bus_get_device() clear return pointer on error
Set the acpi_device pointer which acpi_bus_get_device() returns-by-
reference to NULL on errors.
We've recently had 2 cases where callers of acpi_bus_get_device()
did not properly error check the return value, so set the returned-
by-reference acpi_device pointer to NULL, because at least some
callers of acpi_bus_get_device() expect that to be done on errors.
[ rjw: This issue was exposed by commit
71da201f38df ("ACPI: scan:
Defer enumeration of devices with _DEP lists") which caused it to
be much more likely to occur on some systems, but the real defect
had been introduced by an earlier commit. ]
Fixes:
40e7fcb19293 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA")
Fixes:
bcfcd409d4db ("usb: split code locating ACPI companion into port and device")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Diagnosed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jakub Kicinski [Wed, 20 Jan 2021 17:16:01 +0000 (09:16 -0800)]
Merge tag 'linux-can-fixes-for-5.11-
20210120' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
linux-can-fixes-for-5.11-
20210120
All three patches are by Vincent Mailhol and fix a potential use after free bug
in the CAN device infrastructure, the vxcan driver, and the peak_usk driver. In
the TX-path the skb is used to read from after it was passed to the networking
stack with netif_rx_ni().
* tag 'linux-can-fixes-for-5.11-
20210120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: peak_usb: fix use after free bugs
can: vxcan: vxcan_xmit: fix use after free bug
can: dev: can_restart: fix use after free bug
====================
Link: https://lore.kernel.org/r/20210120125202.2187358-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pan Bian [Wed, 20 Jan 2021 04:44:23 +0000 (20:44 -0800)]
net: systemport: free dev before on error path
On the error path, it should goto the error handling label to free
allocated memory rather than directly return.
Fixes:
31bc72d97656 ("net: systemport: fetch and use clock resources")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210120044423.1704-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grant Grundler [Wed, 20 Jan 2021 01:12:08 +0000 (17:12 -0800)]
net: usb: cdc_ncm: don't spew notifications
RTL8156 sends notifications about every 32ms.
Only display/log notifications when something changes.
This issue has been reported by others:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/
1832472
https://lkml.org/lkml/2020/8/27/1083
...
[785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN
[785962.929954] usb 1-1: Manufacturer: Realtek
[785962.929956] usb 1-1: SerialNumber:
000000001
[785962.991755] usbcore: registered new interface driver cdc_ether
[785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15
[785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384
[785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384
[785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15
[785963.019211] usbcore: registered new interface driver cdc_ncm
[785963.023856] usbcore: registered new interface driver cdc_wdm
[785963.025461] usbcore: registered new interface driver cdc_mbim
[785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0
[785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
...
This is about 2KB per second and will overwrite all contents of a 1MB
dmesg buffer in under 10 minutes rendering them useless for debugging
many kernel problems.
This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering
the majority of those logs useless too.
When the link is up (expected state), spew amount is >2x higher:
...
[786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
...
Chrome OS cannot support RTL8156 until this is fixed.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alban Bedel [Tue, 19 Jan 2021 14:06:38 +0000 (15:06 +0100)]
net: mscc: ocelot: Fix multicast to the CPU port
Multicast entries in the MAC table use the high bits of the MAC
address to encode the ports that should get the packets. But this port
mask does not work for the CPU port, to receive these packets on the
CPU port the MAC_CPU_COPY flag must be set.
Because of this IPv6 was effectively not working because neighbor
solicitations were never received. This was not apparent before commit
9403c158 (net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb
entries) as the IPv6 entries were broken so all incoming IPv6
multicast was then treated as unknown and flooded on all ports.
To fix this problem rework the ocelot_mact_learn() to set the
MAC_CPU_COPY flag when a multicast entry that target the CPU port is
added. For this we have to read back the ports endcoded in the pseudo
MAC address by the caller. It is not a very nice design but that avoid
changing the callers and should make backporting easier.
Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
Fixes:
9403c158b872 ("net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries")
Link: https://lore.kernel.org/r/20210119140638.203374-1-alban.bedel@aerq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Mon, 18 Jan 2021 05:59:20 +0000 (14:59 +0900)]
tcp: Fix potential use-after-free due to double kfree()
Receiving ACK with a valid SYN cookie, cookie_v4_check() allocates struct
request_sock and then can allocate inet_rsk(req)->ireq_opt. After that,
tcp_v4_syn_recv_sock() allocates struct sock and copies ireq_opt to
inet_sk(sk)->inet_opt. Normally, tcp_v4_syn_recv_sock() inserts the full
socket into ehash and sets NULL to ireq_opt. Otherwise,
tcp_v4_syn_recv_sock() has to reset inet_opt by NULL and free the full
socket.
The commit
01770a1661657 ("tcp: fix race condition when creating child
sockets from syncookies") added a new path, in which more than one cores
create full sockets for the same SYN cookie. Currently, the core which
loses the race frees the full socket without resetting inet_opt, resulting
in that both sock_put() and reqsk_put() call kfree() for the same memory:
sock_put
sk_free
__sk_free
sk_destruct
__sk_destruct
sk->sk_destruct/inet_sock_destruct
kfree(rcu_dereference_protected(inet->inet_opt, 1));
reqsk_put
reqsk_free
__reqsk_free
req->rsk_ops->destructor/tcp_v4_reqsk_destructor
kfree(rcu_dereference_protected(inet_rsk(req)->ireq_opt, 1));
Calling kmalloc() between the double kfree() can lead to use-after-free, so
this patch fixes it by setting NULL to inet_opt before sock_put().
As a side note, this kind of issue does not happen for IPv6. This is
because tcp_v6_syn_recv_sock() clones both ipv6_opt and pktopts which
correspond to ireq_opt in IPv4.
Fixes:
01770a166165 ("tcp: fix race condition when creating child sockets from syncookies")
CC: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210118055920.82516-1-kuniyu@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 20 Jan 2021 16:47:34 +0000 (08:47 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2021-01-20
1) Fix wrong bpf_map_peek_elem_proto helper callback, from Mircea Cirjaliu.
2) Fix signed_{sub,add32}_overflows type truncation, from Daniel Borkmann.
3) Fix AF_XDP to also clear pools for inactive queues, from Maxim Mikityanskiy.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix signed_{sub,add32}_overflows type handling
xsk: Clear pool even for inactive queues
bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
====================
Link: https://lore.kernel.org/r/20210120163439.8160-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann [Tue, 19 Jan 2021 23:24:24 +0000 (00:24 +0100)]
bpf: Fix signed_{sub,add32}_overflows type handling
Fix incorrect signed_{sub,add32}_overflows() input types (and a related buggy
comment). It looks like this might have slipped in via copy/paste issue, also
given prior to
3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
the signature of signed_sub_overflows() had s64 a and s64 b as its input args
whereas now they are truncated to s32. Thus restore proper types. Also, the case
of signed_add32_overflows() is not consistent to signed_sub32_overflows(). Both
have s32 as inputs, therefore align the former.
Fixes:
3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: De4dCr0w <sa516203@mail.ustc.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Vincent Mailhol [Wed, 20 Jan 2021 11:41:37 +0000 (20:41 +0900)]
can: peak_usb: fix use after free bugs
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is accessed
after the peak_usb_netif_rx_ni().
Reordering the lines solves the issue.
Fixes:
0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Link: https://lore.kernel.org/r/20210120114137.200019-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Wed, 20 Jan 2021 11:41:36 +0000 (20:41 +0900)]
can: vxcan: vxcan_xmit: fix use after free bug
After calling netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the canfd_frame cfd which aliases skb memory is accessed
after the netif_rx_ni().
Fixes:
a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Link: https://lore.kernel.org/r/20210120114137.200019-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Wed, 20 Jan 2021 11:41:35 +0000 (20:41 +0900)]
can: dev: can_restart: fix use after free bug
After calling netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is accessed
after the netif_rx_ni() in:
stats->rx_bytes += cf->len;
Reordering the lines solves the issue.
Fixes:
39549eef3587 ("can: CAN Network device driver and Netlink interface")
Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Daniel Vetter [Tue, 19 Jan 2021 13:03:18 +0000 (14:03 +0100)]
drm/syncobj: Fix use-after-free
While reviewing Christian's annotation patch I noticed that we have a
user-after-free for the WAIT_FOR_SUBMIT case: We drop the syncobj
reference before we've completed the waiting.
Of course usually there's nothing bad happening here since userspace
keeps the reference, but we can't rely on userspace to play nice here!
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes:
bc9c80fe01a2 ("drm/syncobj: use the timeline point in drm_syncobj_find_fence v4")
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://patchwork.freedesktop.org/patch/msgid/20210119130318.615145-1-daniel.vetter@ffwll.ch