OSDN Git Service
Viresh Kumar [Wed, 19 Jun 2013 05:48:20 +0000 (11:18 +0530)]
cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases
PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both
should be called or both shouldn't be.
In case we have started PRECHANGE notifier and found an error, we must call
POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of
calling notifiers is complete.
Omap driver was taking care of it well, but wasn't restoring freqs.new to
freqs.old in some cases. I wasn't required to add code for it as moving
PRECHANGE notifier down was a better option, so that we call it just before
starting frequency transition.
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Viresh Kumar [Wed, 19 Jun 2013 05:48:20 +0000 (11:18 +0530)]
cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases
PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both
should be called or both shouldn't be.
In case we have started PRECHANGE notifier and found an error, we must call
POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of
calling notifiers is complete.
This patch fixes it.
This also moves PRECHANGE notifier down so that we call it just before starting
frequency transition.
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Viresh Kumar [Wed, 19 Jun 2013 05:48:20 +0000 (11:18 +0530)]
cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases
PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both
should be called or both shouldn't be.
In case we have started PRECHANGE notifier and found an error, we must call
POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of
calling notifiers is complete.
This patch fixes it.
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Viresh Kumar [Wed, 19 Jun 2013 05:48:20 +0000 (11:18 +0530)]
cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases
PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both
should be called or both shouldn't be.
In case we have started PRECHANGE notifier and found an error, we must call
POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of
calling notifiers is complete.
This patch fixes it.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Viresh Kumar [Wed, 19 Jun 2013 05:48:20 +0000 (11:18 +0530)]
cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases
PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both
should be called or both shouldn't be.
In case we have started PRECHANGE notifier and found an error, we must call
POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of
calling notifiers is complete.
Davinci driver was taking care of it but frequency isn't restored to freqs.old.
This patch fixes it.
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Viresh Kumar [Wed, 19 Jun 2013 05:48:20 +0000 (11:18 +0530)]
cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases
PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both
should be called or both shouldn't be.
In case we have started PRECHANGE notifier and found an error, we must call
POSTCHANGE notifier with freqs.new = freqs.old to guarantee that sequence of
calling notifiers is complete.
This patch fixes it.
This also removes code setting policy->cur as this is also done by POSTCHANGE
notifier.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Linus Torvalds [Sat, 22 Jun 2013 19:47:31 +0000 (09:47 -1000)]
Linux 3.10-rc7
Linus Torvalds [Sat, 22 Jun 2013 19:44:45 +0000 (09:44 -1000)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are two fixes that came in this week, one for a regression we
introduced in 3.10 in the GIC interrupt code, and the other one fixes
a typo in newly introduced code"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case
ARM: dts: Correct the base address of pinctrl_3 on Exynos5250
Linus Torvalds [Sat, 22 Jun 2013 19:02:44 +0000 (09:02 -1000)]
Merge tag 'driver-core-3.10-rc6' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg Kroah-Hartman:
"Here's a single patch for the firmware core that resolves a reported
oops in the firmware core that people have been hitting."
* tag 'driver-core-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware loader: fix use-after-free by double abort
Linus Torvalds [Sat, 22 Jun 2013 19:01:47 +0000 (09:01 -1000)]
Merge tag 'usb-3.10-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are two USB patches for 3.10.
One updates the Kconfig wording for CONFIG_USB_PHY to make it,
hopefully, more obvious what this option is (I know you complained
about this when it hit the tree.) The other is a new device id for a
driver"
* tag 'usb-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable
usb: phy: Improve Kconfig help for CONFIG_USB_PHY
Linus Torvalds [Sat, 22 Jun 2013 19:00:28 +0000 (09:00 -1000)]
Merge tag 'tty-3.10-rc6' of git://git./linux/kernel/git/gregkh/tty
Pul tty fixes from Greg Kroah-Hartman:
"Here are two tty core fixes that resolve some regressions that have
been reported recently. Both tiny fixes, but needed"
* tag 'tty-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix transient pty write() EIO
tty/vt: Return EBUSY if deallocating VT1 and it is busy
Linus Torvalds [Sat, 22 Jun 2013 18:54:06 +0000 (08:54 -1000)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"Included is the recent tcm_qla2xxx residual underrun length fix from
Roland, along with Joern's iscsi-target patch for session_lock
breakage within iscsit_stop_time2retain_timer() code. Both are CC'ed
to stable.
The remaining two are specific to recent iscsi-target + iser
conversion changes. One drops some left-over debug noise, and Andy's
patch fixes configfs attribute handling during an explicit network
portal feature bit disable when iser-target is unsupported."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: Remove left over v3.10-rc debug printks
target/iscsi: Fix op=disable + error handling cases in np_store_iser
tcm_qla2xxx: Fix residual for underrun commands that fail
target/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer()
Linus Torvalds [Sat, 22 Jun 2013 18:43:17 +0000 (08:43 -1000)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Another set of fixes for Kernel 3.10.
This series contain:
- two Kbuild fixes for randconfig
- a buffer overflow when using rtl28xuu with r820t tuner
- one clk fixup on exynos4-is driver"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] Fix build when drivers are builtin and frontend modules
[media] s5p makefiles: don't override other selections on obj-[ym]
[media] exynos4-is: Fix FIMC-IS clocks initialization
[media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tuner
Linus Torvalds [Sat, 22 Jun 2013 18:42:20 +0000 (08:42 -1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"Several fixes for bugs caught while looking through f_pos (ab)users"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aout32 coredump compat fix
splice: don't pass the address of ->f_pos to methods
mconsole: we'd better initialize pos before passing it to vfs_read()...
Al Viro [Sat, 22 Jun 2013 07:01:38 +0000 (11:01 +0400)]
aout32 coredump compat fix
dump_seek() does SEEK_CUR, not SEEK_SET; native binfmt_aout
handles it correctly (seeks by PAGE_SIZE - sizeof(struct user),
getting the current position to PAGE_SIZE), compat one seeks
by PAGE_SIZE and ends up at PAGE_SIZE + already written...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Fri, 21 Jun 2013 16:33:48 +0000 (06:33 -1000)]
Merge branch 'x86/urgent' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"This series fixes a couple of build failures, and fixes MTRR cleanup
and memory setup on very specific memory maps.
Finally, it fixes triggering backtraces on all CPUs, which was
inadvertently disabled on x86."
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Fix dummy variable buffer allocation
x86: Fix trigger_all_cpu_backtrace() implementation
x86: Fix section mismatch on load_ucode_ap
x86: fix build error and kconfig for ia32_emulation and binfmt
range: Do not add new blank slot with add_range_with_merge
x86, mtrr: Fix original mtrr range get for mtrr_cleanup
Linus Torvalds [Fri, 21 Jun 2013 16:33:06 +0000 (06:33 -1000)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm radeon fixes from Dave Airlie:
"One core fix, but mostly radeon fixes for s/r and big endian UVD
support, and a fix to stop the GPU being reset for no good reason, and
crashing people's machines."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: update lockup tracking when scheduling in empty ring
drm/prime: Honor requested file flags when exporting a buffer
drm/radeon: fix UVD on big endian
drm/radeon: fix write back suspend regression with uvd v2
drm/radeon: do not try to uselessly update virtual memory pagetable
Linus Torvalds [Fri, 21 Jun 2013 16:31:10 +0000 (06:31 -1000)]
Merge tag 'acpi-3.10-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
- Fix for a regression causing a failure to turn on some devices on
some systems during initialization introduced by a recent revert of
an ACPI PM change that broke something else. Fortunately, we know
exactly what devices are affected, so we can add a fix just for them
leaving everyone else alone.
- ACPI power resources initialization fix preventing a NULL pointer
from being dereferenced in the acpi_add_power_resource() error code
path.
- ACPI dock station driver fix that adds missing locking to
write_undock().
- ACPI resources allocation fix changing the scope of an old workaround
so that it doesn't affect systems that aren't actually buggy. This
was reported a couple of days ago to fix DMA problems on some new
platforms so we need it in -stable. From Mika Westerberg.
* tag 'acpi-3.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / LPSS: Power up LPSS devices during enumeration
ACPI / PM: Fix error code path for power resources initialization
ACPI / dock: Take ACPI scan lock in write_undock()
ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources
Linus Torvalds [Fri, 21 Jun 2013 16:29:22 +0000 (06:29 -1000)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Three one-line fixes for my first pull request; one for x86 host, one
for x86 guest, one for PPC"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86: kvmclock: zero initialize pvclock shared memory area
kvm/ppc/booke: Delay kvmppc_lazy_ee_enable
KVM: x86: remove vcpu's CPL check in host-invoked XCR set
Linus Torvalds [Fri, 21 Jun 2013 16:28:39 +0000 (06:28 -1000)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes an unaligned crash in XTS mode when using aseni_intel"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: aesni_intel - fix accessing of unaligned memory
Linus Torvalds [Fri, 21 Jun 2013 16:27:40 +0000 (06:27 -1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull Ceph fix from Sage Weil:
"This fixes a problem preventing the kernel and userland librbd
libraries from sharing data with the new format 2 images"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: use the correct length for format 2 object names
H. Peter Anvin [Fri, 21 Jun 2013 10:01:21 +0000 (03:01 -0700)]
Merge tag 'efi-urgent' into x86/urgent
* Don't leak random kernel memory to EFI variable NVRAM when attempting
to initiate garbage collection. Also, free the kernel memory when
we're done with it instead of leaking - Ben Hutchings
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Ben Hutchings [Sun, 16 Jun 2013 20:27:12 +0000 (21:27 +0100)]
x86/efi: Fix dummy variable buffer allocation
1. Check for allocation failure
2. Clear the buffer contents, as they may actually be written to flash
3. Don't leak the buffer
Compile-tested only.
[ Tested successfully on my buggy ASUS machine - Matt ]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Nicholas Bellinger [Thu, 20 Jun 2013 23:36:17 +0000 (16:36 -0700)]
iscsi-target: Remove left over v3.10-rc debug printks
Reported-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Andy Grover [Wed, 29 May 2013 19:05:59 +0000 (12:05 -0700)]
target/iscsi: Fix op=disable + error handling cases in np_store_iser
Writing 0 when iser was not previously enabled, so succeed but do
nothing so that user-space code doesn't need a try: catch block
when ib_isert logic is not available.
Also, return actual error from add_network_portal using PTR_ERR
during op=enable failure.
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Dave Airlie [Thu, 20 Jun 2013 22:52:19 +0000 (08:52 +1000)]
Merge branch 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
One user visible fix to stop misreport GPU hangs and subsequent resets.
* 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: update lockup tracking when scheduling in empty ring
Jerome Glisse [Wed, 19 Jun 2013 14:02:28 +0000 (10:02 -0400)]
drm/radeon: update lockup tracking when scheduling in empty ring
There might be issue with lockup detection when scheduling on an
empty ring that have been sitting idle for a while. Thus update
the lockup tracking data when scheduling new work in an empty ring.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Thu, 20 Jun 2013 18:18:35 +0000 (08:18 -1000)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two smaller fixes - plus a context tracking tracing fix that is a bit
bigger"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/context-tracking: Add preempt_schedule_context() for tracing
sched: Fix clear NOHZ_BALANCE_KICK
sched/x86: Construct all sibling maps if smt
Linus Torvalds [Thu, 20 Jun 2013 18:17:36 +0000 (08:17 -1000)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Four fixes. The mmap ones are unfortunately larger than desired -
fuzzing uncovered bugs that needed perf context life time management
changes to fix properly"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP
perf: Fix mmap() accounting hole
perf: Fix perf mmap bugs
kprobes: Fix to free gone and unused optprobes
Linus Torvalds [Thu, 20 Jun 2013 18:16:07 +0000 (08:16 -1000)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull cpu idle fixes from Thomas Gleixner:
- Add a missing irq enable. Fallout of the idle conversion
- Fix stackprotector wreckage caused by the idle conversion
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
idle: Enable interrupts in the weak arch_cpu_idle() implementation
idle: Add the stack canary init to cpu_startup_entry()
Linus Torvalds [Thu, 20 Jun 2013 18:15:13 +0000 (08:15 -1000)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
- Fix inconstinant clock usage in virtual time accounting
- Fix a build error in KVM caused by the NOHZ work
- Remove a pointless timekeeping duty assignment which breaks NOHZ
- Use a proper notifier return value to avoid random behaviour
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick: Remove useless timekeeping duty attribution to broadcast source
nohz: Fix notifier return val that enforce timekeeping
kvm: Move guest entry/exit APIs to context_tracking
vtime: Use consistent clocks among nohz accounting
Linus Torvalds [Thu, 20 Jun 2013 18:08:46 +0000 (08:08 -1000)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
Pull powerpc fix fro, Benjamin Herrenschmidt:
"We accidentally broke hugetlbfs on Freescale embedded processors which
use a slightly different page table layout than our server processors"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix bad pmd error with book3E config
Linus Torvalds [Thu, 20 Jun 2013 18:07:42 +0000 (08:07 -1000)]
Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile
Pull tilepro fix from Chris Metcalf:
"This change allows the older tilepro architecture to be correctly
built by newer gccs, despite a change that caused gcc to start trying
to use an out-of-line implementation for __builtin_ffsll().
This should be inline again starting with gcc 4.7.4 and 4.8.2 or so,
but meanwhile this change keeps things from breaking, with the only
cost being a few bytes of code in the kernel to provide __ffsdi2 even
for compilers that do inline it"
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tilepro: work around module link error with gcc 4.7
Linus Torvalds [Thu, 20 Jun 2013 18:06:48 +0000 (08:06 -1000)]
Merge tag 'arm64-stable' of git://git./linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 perf fix from Catalin Marinas:
"Perf fix (user-mode PC recording)"
* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
perf: arm64: Record the user-mode PC in the call chain.
Al Viro [Thu, 20 Jun 2013 14:58:36 +0000 (18:58 +0400)]
splice: don't pass the address of ->f_pos to methods
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Mauro Carvalho Chehab [Thu, 20 Jun 2013 13:35:53 +0000 (10:35 -0300)]
[media] Fix build when drivers are builtin and frontend modules
There are a large number of reports that the media build is
not compiling when some drivers are compiled as builtin, while
the needed frontends are compiled as module.
On the last one of such reports:
From: kbuild test robot <fengguang.wu@intel.com>
Subject: saa7134-dvb.c:undefined reference to `zl10039_attach'
The .config file has:
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_SAA7134_DVB=y
# CONFIG_MEDIA_ATTACH is not set
CONFIG_DVB_ZL10039=m
And it produces all those errors:
drivers/built-in.o: In function `set_type':
tuner-core.c:(.text+0x2f263e): undefined reference to `tea5767_attach'
tuner-core.c:(.text+0x2f273e): undefined reference to `tda9887_attach'
drivers/built-in.o: In function `tuner_probe':
tuner-core.c:(.text+0x2f2d20): undefined reference to `tea5767_autodetection'
drivers/built-in.o: In function `av7110_attach':
av7110.c:(.text+0x330bda): undefined reference to `ves1x93_attach'
av7110.c:(.text+0x330bf7): undefined reference to `stv0299_attach'
av7110.c:(.text+0x330c63): undefined reference to `tda8083_attach'
av7110.c:(.text+0x330d09): undefined reference to `ves1x93_attach'
av7110.c:(.text+0x330d33): undefined reference to `tda8083_attach'
av7110.c:(.text+0x330d5d): undefined reference to `stv0297_attach'
av7110.c:(.text+0x330dbe): undefined reference to `stv0299_attach'
drivers/built-in.o: In function `tuner_attach_dtt7520x':
ngene-cards.c:(.text+0x3381cb): undefined reference to `dvb_pll_attach'
drivers/built-in.o: In function `demod_attach_lg330x':
ngene-cards.c:(.text+0x33828a): undefined reference to `lgdt330x_attach'
drivers/built-in.o: In function `demod_attach_stv0900':
ngene-cards.c:(.text+0x3383d5): undefined reference to `stv090x_attach'
drivers/built-in.o: In function `cineS2_probe':
ngene-cards.c:(.text+0x338b7f): undefined reference to `drxk_attach'
drivers/built-in.o: In function `configure_tda827x_fe':
saa7134-dvb.c:(.text+0x346ae7): undefined reference to `tda10046_attach'
drivers/built-in.o: In function `dvb_init':
saa7134-dvb.c:(.text+0x347283): undefined reference to `mt352_attach'
saa7134-dvb.c:(.text+0x3472cd): undefined reference to `mt352_attach'
saa7134-dvb.c:(.text+0x34731c): undefined reference to `tda10046_attach'
saa7134-dvb.c:(.text+0x34733c): undefined reference to `tda10046_attach'
saa7134-dvb.c:(.text+0x34735c): undefined reference to `tda10046_attach'
saa7134-dvb.c:(.text+0x347378): undefined reference to `tda10046_attach'
saa7134-dvb.c:(.text+0x3473db): undefined reference to `tda10046_attach'
drivers/built-in.o:saa7134-dvb.c:(.text+0x347502): more undefined references to `tda10046_attach' follow
drivers/built-in.o: In function `dvb_init':
saa7134-dvb.c:(.text+0x347812): undefined reference to `mt352_attach'
saa7134-dvb.c:(.text+0x347951): undefined reference to `mt312_attach'
saa7134-dvb.c:(.text+0x3479a9): undefined reference to `mt312_attach'
>> saa7134-dvb.c:(.text+0x3479c1): undefined reference to `zl10039_attach'
This is happening because a builtin module can't use directly a symbol
found on a module. By enabling CONFIG_MEDIA_ATTACH, the configuration
becomes valid, as dvb_attach() macro loads the module if needed, making
the symbol available to the builtin module.
While this bug started to appear after the patches that use IS_DEFINED
macro (like changeset
7b34be71db533f3e0cf93d53cf62d036cdb5418a), this
bug is a way ancient than that.
The thing is that, before the IS_DEFINED() patches, the logic used to be:
&& defined(MODULE))
struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe,
u8 i2c_addr,
struct i2c_adapter *i2c);
static inline struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe,
u8 i2c_addr,
struct i2c_adapter *i2c)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
}
The above code, with the .config file used, was evoluting to FALSE
(instead of TRUE as it should be, as CONFIG_DVB_ZL10039 is 'm'),
and were adding the static inline code at saa7134-dvb, instead
of the external call. So, while it weren't producing any compilation
error, the code weren't working either.
So, as the overhead for using CONFIG_MEDIA_ATTACH is minimal, just
enable it, if MODULES is defined.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Shawn Guo [Wed, 12 Jun 2013 11:30:27 +0000 (19:30 +0800)]
irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case
Commit
c011470 (irqchip: gic: Perform the gic_secondary_init() call via
CPU notifier) moves gic_secondary_init() that used to be called in
.smp_secondary_init hook into a notifier call. But it changes the
system behavior a little bit. Before the commit, gic_cpu_init()
is called not only when kernel brings up the secondary cores but also
when system resuming procedure hot-plugs the cores back to kernel.
While after the commit, the function will not be called in the latter
case, where the 'action' will not be CPU_STARTING but
CPU_STARTING_FROZEN. This behavior difference at least causes the
following suspend/resume regression on imx6q.
$ echo mem > /sys/power/state
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
mmc1: card e624 removed
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
PM: suspend of devices complete after 5.930 msecs
PM: suspend devices took 0.010 seconds
PM: late suspend of devices complete after 0.343 msecs
PM: noirq suspend of devices complete after 0.828 msecs
Disabling non-boot CPUs ...
CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
INFO: rcu_sched detected stalls on CPUs/tasks: { 1 2 3} (detected by 0, t=2102 jiffies, g=
4294967169, c=
4294967168, q=17)
Task dump for CPU 1:
swapper/1 R running 0 0 1 0x00000000
Backtrace:
[<
bf895ff4>] (0xbf895ff4) from [<
00000000>] ( (null))
Backtrace aborted due to bad frame pointer <
8007ccdc>
Task dump for CPU 2:
swapper/2 R running 0 0 1 0x00000000
Backtrace:
[<
8075dbdc>] (0x8075dbdc) from [<
00000000>] ( (null))
Backtrace aborted due to bad frame pointer <
00000002>
Task dump for CPU 3:
swapper/3 R running 0 0 1 0x00000000
Backtrace:
[<
8075dbdc>] (0x8075dbdc) from [<
00000000>] ( (null))
Fix the regression by checking 'action' being CPU_STARTING_FROZEN to
have gic_cpu_init() called for secondary cores when system resumes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Michel Lespinasse [Thu, 6 Jun 2013 11:41:15 +0000 (04:41 -0700)]
x86: Fix trigger_all_cpu_backtrace() implementation
The following change fixes the x86 implementation of
trigger_all_cpu_backtrace(), which was previously (accidentally,
as far as I can tell) disabled to always return false as on
architectures that do not implement this function.
trigger_all_cpu_backtrace(), as defined in include/linux/nmi.h,
should call arch_trigger_all_cpu_backtrace() if available, or
return false if the underlying arch doesn't implement this
function.
x86 did provide a suitable arch_trigger_all_cpu_backtrace()
implementation, but it wasn't actually being used because it was
declared in asm/nmi.h, which linux/nmi.h doesn't include. Also,
linux/nmi.h couldn't easily be fixed by including asm/nmi.h,
because that file is not available on all architectures.
I am proposing to fix this by moving the x86 definition of
arch_trigger_all_cpu_backtrace() to asm/irq.h.
Tested via: echo l > /proc/sysrq-trigger
Before the change, this uses a fallback implementation which
shows backtraces on active CPUs (using
smp_call_function_interrupt() )
After the change, this shows NMI backtraces on all CPUs
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1370518875-1346-1-git-send-email-walken@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jed Davis [Thu, 20 Jun 2013 03:07:14 +0000 (04:07 +0100)]
perf: arm64: Record the user-mode PC in the call chain.
With this change, we no longer lose the innermost entry in the user-mode
part of the call chain. See also the x86 port, which includes the ip,
and the corresponding change in arch/arm.
Signed-off-by: Jed Davis <jld@mozilla.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mauro Carvalho Chehab [Thu, 20 Jun 2013 08:46:00 +0000 (05:46 -0300)]
[media] s5p makefiles: don't override other selections on obj-[ym]
The $obj-m/$obj-y vars should be adding new modules to build, not
overriding it. So, it should never use
$obj-y := foo.o
instead, it should use:
$obj-y += foo.o
Failing to do that is very bad, as it will suppress needed modules.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Aneesh Kumar K.V [Wed, 19 Jun 2013 06:34:26 +0000 (12:04 +0530)]
powerpc: Fix bad pmd error with book3E config
Book3E uses the hugepd at PMD level and don't encode pte directly
at the pmd level. So it will find the lower bits of pmd set
and the pmd_bad check throws error. Infact the current code
will never take the free_hugepd_range call at all because it will
clear the pmd if it find a hugepd pointer. Fix this by clearing
bad pmd only if it is not a hugepd pointer.
This is regression introduced by
e2b3d202d1dba8f3546ed28224ce485bc50010be
"powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format"
Reported-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Anders Hammarquist [Tue, 18 Jun 2013 23:45:48 +0000 (01:45 +0200)]
USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable
Add product id for Abbott strip port cable for Precision meter which
uses the TI 3410 chip.
Signed-off-by: Anders Hammarquist <iko@iko.pp.se>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Tue, 18 Jun 2013 22:45:34 +0000 (00:45 +0200)]
ACPI / LPSS: Power up LPSS devices during enumeration
Commit
7cd8407 (ACPI / PM: Do not execute _PS0 for devices without
_PSC during initialization) introduced a regression on some systems
with Intel Lynxpoint Low-Power Subsystem (LPSS) where some devices
need to be powered up during initialization, but their device objects
in the ACPI namespace have _PS0 and _PS3 only (without _PSC or power
resources).
To work around this problem, make the ACPI LPSS driver power up
devices it knows about by using a new helper function
acpi_device_fix_up_power() that does all of the necessary
sanity checks and calls acpi_dev_pm_explicit_set() to put the
device into D0.
Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Tue, 18 Jun 2013 22:44:45 +0000 (00:44 +0200)]
ACPI / PM: Fix error code path for power resources initialization
Commit
781d737 (ACPI: Drop power resources driver) introduced a
bug in the power resources initialization error code path causing
a NULL pointer to be referenced in acpi_release_power_resource()
if there's an error triggering a jump to the 'err' label in
acpi_add_power_resource(). This happens because the list_node
field of struct acpi_power_resource has not been initialized yet
at this point and doing a list_del() on it is a bad idea.
To prevent this problem from occuring, initialize the list_node
field of struct acpi_power_resource upfront.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Rafael J. Wysocki [Sat, 15 Jun 2013 22:38:30 +0000 (00:38 +0200)]
ACPI / dock: Take ACPI scan lock in write_undock()
Since commit
3757b94 (ACPI / hotplug: Fix concurrency issues and
memory leaks) acpi_bus_scan() and acpi_bus_trim() must always be
called under acpi_scan_lock, but currently the following scenario
violating that requirement is possible:
write_undock()
handle_eject_request()
hotplug_dock_devices()
dock_remove_acpi_device()
acpi_bus_trim()
Fix that by making write_undock() acquire acpi_scan_lock before
calling handle_eject_request() as appropriate (begin_undock() is
under the lock too in analogy with acpi_dock_deferred_cb()).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Mika Westerberg [Mon, 20 May 2013 15:41:45 +0000 (15:41 +0000)]
ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources
acpi_get_override_irq() was added because there was a problem with
buggy BIOSes passing wrong IRQ() resource for the RTC IRQ. The
commit that added the workaround was
61fd47e0c8476 (ACPI: fix two
IRQ8 issues in IOAPIC mode).
With ACPI 5 enumerated devices there are typically one or more
extended IRQ resources per device (and these IRQs can be shared).
However, the acpi_get_override_irq() workaround forces all IRQs in
range 0 - 15 (the legacy ISA IRQs) to be edge triggered, active high
as can be seen from the dmesg below:
ACPI: IRQ 6 override to edge, high
ACPI: IRQ 7 override to edge, high
ACPI: IRQ 7 override to edge, high
ACPI: IRQ 13 override to edge, high
Also /proc/interrupts for the I2C controllers (INT33C2 and INT33C3) shows
the same thing:
7: 4 0 0 0 IO-APIC-edge INT33C2:00, INT33C3:00
The _CSR method for INT33C2 (and INT33C3) device returns following
resource:
Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,, )
{
0x00000007,
}
which states that this is supposed to be level triggered, active low,
shared IRQ instead.
Fix this by making sure that acpi_get_override_irq() gets only called
when we are dealing with legacy IRQ() or IRQNoFlags() descriptors.
While we are there, correct pr_warning() to print the right triggering
value.
This change turns out to be necessary to make DMA work correctly on
systems based on the Intel Lynxpoint PCH (Platform Controller Hub).
[rjw: Changelog]
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Paul Gortmaker [Wed, 19 Jun 2013 15:15:26 +0000 (11:15 -0400)]
x86: Fix section mismatch on load_ucode_ap
We are in the process of removing all the __cpuinit annotations.
While working on making that change, an existing problem was
made evident:
WARNING: arch/x86/kernel/built-in.o(.text+0x198f2): Section mismatch
in reference from the function cpu_init() to the function
.init.text:load_ucode_ap() The function cpu_init() references
the function __init load_ucode_ap(). This is often because cpu_init
lacks a __init annotation or the annotation of load_ucode_ap is wrong.
This now appears because in my working tree, cpu_init() is no longer
tagged as __cpuinit, and so the audit picks up the mismatch. The 2nd
hypothesis from the audit is the correct one, as there was an incorrect
__init tag on the prototype in the header (but __cpuinit was used on
the function itself.)
The audit is telling us that the prototype's __init annotation took
effect and the function did land in the .init.text section. Checking
with objdump on a mainline tree that still has __cpuinit shows that
the __cpuinit on the function takes precedence over the __init on the
prototype, but that won't be true once we make __cpuinit a no-op.
Even though we are removing __cpuinit, we temporarily align both
the function and the prototype on __cpuinit so that the changeset
can be applied to stable trees if desired.
[ hpa: build fix only, no object code change ]
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable <stable@vger.kernel.org> # 3.9+
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/1371654926-11729-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
David Daney [Mon, 17 Jun 2013 15:46:07 +0000 (08:46 -0700)]
mn10300: Fix include dependency in irqflags.h et al.
We need to pick up the definition of raw_smp_processor_id() from
asm/smp.h. For the !SMP case, we need to supply a definition of
raw_smp_processor_id().
Because of the include dependencies we cannot use smp_call_func_t in
asm/smp.h, but we do need linux/thread_info.h
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 19 Jun 2013 16:24:50 +0000 (06:24 -1000)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
"Various sparc bug fixes, in particular:
1) TSB hashes have to be flushed before TLB on sparc64, from Dave
Kleikamp.
2) LEON timer interrupts can get stuck, from Andreas Larsson.
3) Sparc64 needs to handle lack of address-congruence devicetree
property, from Bob Picco"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: tsb must be flushed before tlb
sparc,leon: Convert to use devm_ioremap_resource
sparc64 address-congruence property
sparc32, leon: Enable interrupts before going idle to avoid getting stuck
sparc32, leon: Remove separate "ticker" timer for SMP
sparc: kernel: using strlcpy() instead of strcpy()
arch: sparc: prom: looping issue, need additional length check in the outside looping
sparc: remove inline marking of EXPORT_SYMBOL functions
sparc: Switch to asm-generic/linkage.h
Linus Torvalds [Wed, 19 Jun 2013 16:23:56 +0000 (06:23 -1000)]
Merge branch 'parisc-3.10' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"This contains a kernel segfault fix when reading /proc/kpageflags or
/proc/kpagecount, two fixes for the serial port and PCI graphic card
support on C8000 workstations and a fix to use unshadowed registers
for flushing D- and I-caches."
* 'parisc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Use unshadowed index register for flush instructions in flush_dcache_page_asm and flush_icache_page_asm
parisc: provide pci_mmap_page_range() for parisc
parisc: fix serial ports on C8000 workstation
parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 (part 2)
James Hogan [Fri, 14 Jun 2013 09:31:01 +0000 (10:31 +0100)]
metag: fix mm/hugetlb.c build breakage
Commit
106c992a5ebe ("mm/hugetlb: add more arch-defined huge_pte
functions") added an include of <asm-generic/hugetlb.h> to each
architecture's <asm/hugetlb.h> (except s390). Unfortunately metag was
missed which resulted in build errors when hugetlbfs is enabled (see
below).
Add the include for metag too to fix the build errors:
mm/hugetlb.c In function 'make_huge_pte':
mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkwrite'
mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkdirty'
...
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 19 Jun 2013 16:19:46 +0000 (06:19 -1000)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
"The larger changes this time are
- "ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page"
which fixes more data corruption problems with O_DIRECT
- "ARM: 7759/1: decouple CPU offlining from reboot/shutdown" which
gets us back to working shutdown/reboot on SMP platforms
- "ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect"
which fixes a shutdown regression found in v3.10 on Versatile
Express platforms.
The remainder are the quite small, maybe one or two line changes"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7759/1: decouple CPU offlining from reboot/shutdown
ARM: 7756/1: zImage/virt: remove hyp-stub.S during distclean
ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
ARM: 7754/1: Fix the CPU ID and the mask associated to the PJ4B
ARM: 7753/1: map_init_section flushes incorrect pmd
ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect
Sylwester Nawrocki [Fri, 14 Jun 2013 13:44:30 +0000 (10:44 -0300)]
[media] exynos4-is: Fix FIMC-IS clocks initialization
The ISP clock register content is not preserved over the ISP power domain
off/on cycle. Instead of setting the clock frequencies once at probe time
the clock rates set up is moved to the runtime_resume handler, which is
invoked after the related power domain is already enabled, ensuring the
clocks are properly configured when the device is actively used.
This fixes the FIMC-IS malfunctions and STREAM ON timeout errors accuring
on some boards:
[ 59.860000] fimc_is_general_irq_handler:583 ISR_NDONE: 5: 0x800003e8, IS_ERROR_UNKNOWN
[ 59.860000] fimc_is_general_irq_handler:586 IS_ERROR_TIME_OUT
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Rostedt [Fri, 24 May 2013 19:23:40 +0000 (15:23 -0400)]
tracing/context-tracking: Add preempt_schedule_context() for tracing
Dave Jones hit the following bug report:
===============================
[ INFO: suspicious RCU usage. ]
3.10.0-rc2+ #1 Not tainted
-------------------------------
include/linux/rcupdate.h:771 rcu_read_lock() used illegally while idle!
other info that might help us debug this:
RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
2 locks held by cc1/63645:
#0: (&rq->lock){-.-.-.}, at: [<
ffffffff816b39fd>] __schedule+0xed/0x9b0
#1: (rcu_read_lock){.+.+..}, at: [<
ffffffff8109d645>] cpuacct_charge+0x5/0x1f0
CPU: 1 PID: 63645 Comm: cc1 Not tainted 3.10.0-rc2+ #1 [loadavg: 40.57 27.55 13.39 25/277 64369]
Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010
0000000000000000 ffff88010f78fcf8 ffffffff816ae383 ffff88010f78fd28
ffffffff810b698d ffff88011c092548 000000000023d073 ffff88011c092500
0000000000000001 ffff88010f78fd60 ffffffff8109d7c5 ffffffff8109d645
Call Trace:
[<
ffffffff816ae383>] dump_stack+0x19/0x1b
[<
ffffffff810b698d>] lockdep_rcu_suspicious+0xfd/0x130
[<
ffffffff8109d7c5>] cpuacct_charge+0x185/0x1f0
[<
ffffffff8109d645>] ? cpuacct_charge+0x5/0x1f0
[<
ffffffff8108dffc>] update_curr+0xec/0x240
[<
ffffffff8108f528>] put_prev_task_fair+0x228/0x480
[<
ffffffff816b3a71>] __schedule+0x161/0x9b0
[<
ffffffff816b4721>] preempt_schedule+0x51/0x80
[<
ffffffff816b4800>] ? __cond_resched_softirq+0x60/0x60
[<
ffffffff816b6824>] ? retint_careful+0x12/0x2e
[<
ffffffff810ff3cc>] ftrace_ops_control_func+0x1dc/0x210
[<
ffffffff816be280>] ftrace_call+0x5/0x2f
[<
ffffffff816b681d>] ? retint_careful+0xb/0x2e
[<
ffffffff816b4805>] ? schedule_user+0x5/0x70
[<
ffffffff816b4805>] ? schedule_user+0x5/0x70
[<
ffffffff816b6824>] ? retint_careful+0x12/0x2e
------------[ cut here ]------------
What happened was that the function tracer traced the schedule_user() code
that tells RCU that the system is coming back from userspace, and to
add the CPU back to the RCU monitoring.
Because the function tracer does a preempt_disable/enable_notrace() calls
the preempt_enable_notrace() checks the NEED_RESCHED flag. If it is set,
then preempt_schedule() is called. But this is called before the user_exit()
function can inform the kernel that the CPU is no longer in user mode and
needs to be accounted for by RCU.
The fix is to create a new preempt_schedule_context() that checks if
the kernel is still in user mode and if so to switch it to kernel mode
before calling schedule. It also switches back to user mode coming back
from schedule in need be.
The only user of this currently is the preempt_enable_notrace(), which is
only used by the tracing subsystem.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1369423420.6828.226.camel@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vincent Guittot [Wed, 5 Jun 2013 08:13:11 +0000 (10:13 +0200)]
sched: Fix clear NOHZ_BALANCE_KICK
I have faced a sequence where the Idle Load Balance was sometime not
triggered for a while on my platform, in the following scenario:
CPU 0 and CPU 1 are running tasks and CPU 2 is idle
CPU 1 kicks the Idle Load Balance
CPU 1 selects CPU 2 as the new Idle Load Balancer
CPU 2 sets NOHZ_BALANCE_KICK for CPU 2
CPU 2 sends a reschedule IPI to CPU 2
While CPU 3 wakes up, CPU 0 or CPU 1 migrates a waking up task A on CPU 2
CPU 2 finally wakes up, runs task A and discards the Idle Load Balance
task A quickly goes back to sleep (before a tick occurs on CPU 2)
CPU 2 goes back to idle with NOHZ_BALANCE_KICK set
Whenever CPU 2 will be selected as the ILB, no reschedule IPI will be sent
because NOHZ_BALANCE_KICK is already set and no Idle Load Balance will be
performed.
We must wait for the sched softirq to be raised on CPU 2 thanks to another
part the kernel to come back to clear NOHZ_BALANCE_KICK.
The proposed solution clears NOHZ_BALANCE_KICK in schedule_ipi if
we can't raise the sched_softirq for the Idle Load Balance.
Change since V1:
- move the clear of NOHZ_BALANCE_KICK in got_nohz_idle_kick if the ILB
can't run on this CPU (as suggested by Peter)
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1370419991-13870-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stephane Eranian [Fri, 7 Jun 2013 21:22:10 +0000 (23:22 +0200)]
perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP
This patch fixes broken support of PEBS-LL on SNB-EP/IVB-EP.
For some reason, the LDLAT extra reg definition for snb_ep
showed up as duplicate in the snb table.
This patch moves the definition of LDLAT back into the
snb_ep table.
Thanks to Don Zickus for tracking this one down.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130607212210.GA11849@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Tue, 4 Jun 2013 08:44:21 +0000 (10:44 +0200)]
perf: Fix mmap() accounting hole
Vince's fuzzer once again found holes. This time it spotted a leak in
the locked page accounting.
When an event had redirected output and its close() was the last
reference to the buffer we didn't have a vm context to undo accounting.
Change the code to destroy the buffer on the last munmap() and detach
all redirected events at that time. This provides us the right context
to undo the vm accounting.
Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130604084421.GI8923@twins.programming.kicks-ass.net
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Igor Mammedov [Mon, 10 Jun 2013 16:31:11 +0000 (18:31 +0200)]
x86: kvmclock: zero initialize pvclock shared memory area
kernel might hung in pvclock_clocksource_read() due to
uninitialized memory might contain odd version value in
following cycle:
do {
version = __pvclock_read_cycles(src, &ret, &flags);
} while ((src->version & 1) || version != src->version);
if secondary kvmclock is accessed before it's registered with kvm.
Clear garbage in pvclock shared memory area right after it's
allocated to avoid this issue.
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=59521
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
[See BZ for analysis. We may want a different fix for 3.11, but
this is the safest for now - Paolo]
Cc: <stable@vger.kernel.org> # 3.8
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Scott Wood [Tue, 11 Jun 2013 16:38:31 +0000 (11:38 -0500)]
kvm/ppc/booke: Delay kvmppc_lazy_ee_enable
kwmppc_lazy_ee_enable() should be called as late as possible,
or else we get things like WARN_ON(preemptible()) in enable_kernel_fp()
in configurations where preemptible() works.
Note that book3s_pr already waits until just before __kvmppc_vcpu_run
to call kvmppc_lazy_ee_enable().
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dave Kleikamp [Tue, 18 Jun 2013 14:05:36 +0000 (09:05 -0500)]
sparc: tsb must be flushed before tlb
This fixes a race where a cpu may re-load a tlb from a stale tsb right
after it has been flushed by a remote function call.
I still see some instability when stressing the system with parallel
kernel builds while creating memory pressure by writing to
/proc/sys/vm/nr_hugepages, but this patch improves the stability
significantly.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tushar Behera [Mon, 17 Jun 2013 09:07:44 +0000 (14:37 +0530)]
sparc,leon: Convert to use devm_ioremap_resource
Commit
75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()")
introduced devm_ioremap_resource() and deprecated the use of
devm_request_and_ioremap().
While at it, also remove the error message as devm_ioremap_resource()
also prints similar error message.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
CC: sparclinux@vger.kernel.org
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
bob picco [Tue, 11 Jun 2013 18:54:51 +0000 (14:54 -0400)]
sparc64 address-congruence property
The Machine Description (MD) property "address-congruence-offset" is
optional. According to the MD specification the value is assumed 0UL when
not present. This caused early boot failure on T5.
Signed-off-by: Bob Picco <bob.picco@oracle.com>
CC: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Larsson [Mon, 10 Jun 2013 06:56:41 +0000 (08:56 +0200)]
sparc32, leon: Enable interrupts before going idle to avoid getting stuck
This enables interrupts for Leon before having the CPU enter power-down mode.
Commit
87fa05aeb3a5e8e21b1a5510eef6983650eff092, "sparc: Use generic idle loop",
gets the CPU stuck on idle for Leon systems. On Leon, disabling interrupts and
powering down the processor will get the processor stuck waiting for an
interrupt that will never be reacted to.
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Larsson [Mon, 10 Jun 2013 06:53:28 +0000 (08:53 +0200)]
sparc32, leon: Remove separate "ticker" timer for SMP
This reduces the need from two timers to one timer.
Moreover, without this patch, when the "ticker" timer triggers timer_cs_read via
tick_periodic it reads the value of the usual timer it can get an wrapped timer
value without timer_cs_internal_counter having been updated leading to the clock
going backwards. This effectively hangs one cpu that gets stuck in
update_wall_time with an offset slightly smaller than 0xffffffffffffffff.
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhao Hongjiang [Sun, 9 Jun 2013 08:57:58 +0000 (16:57 +0800)]
sparc: kernel: using strlcpy() instead of strcpy()
'boot_command_line' and 'full_boot_str' has a fix length, 'cmdline_p' and
'boot_command' maybe larger than them. So use strlcpy() instead of strcpy()
to avoid memory overflow.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chen Gang [Thu, 30 May 2013 03:35:22 +0000 (11:35 +0800)]
arch: sparc: prom: looping issue, need additional length check in the outside looping
When "cp >= barg_buf + BARG_LEN-2", it breaks internel looping 'while',
but outside loop 'for' still has effect, so "*cp++ = ' '" will continue
repeating which may cause memory overflow.
So need additional length check for it in the outside looping.
Also beautify the related code which found by "./scripts/checkpatch.pl"
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Efremov [Thu, 9 May 2013 10:36:54 +0000 (14:36 +0400)]
sparc: remove inline marking of EXPORT_SYMBOL functions
EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Tue, 7 May 2013 09:55:55 +0000 (11:55 +0200)]
sparc: Switch to asm-generic/linkage.h
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Al Viro [Wed, 19 Jun 2013 08:35:42 +0000 (12:35 +0400)]
mconsole: we'd better initialize pos before passing it to vfs_read()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dave Airlie [Wed, 19 Jun 2013 01:48:36 +0000 (11:48 +1000)]
Merge branch 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Alex writes:
Remove some harmless but confusing VM related error messages
fix a regression with suspend and UVD,
fix UVD on big endian.
* 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix UVD on big endian
drm/radeon: fix write back suspend regression with uvd v2
drm/radeon: do not try to uselessly update virtual memory pagetable
Laurent Pinchart [Wed, 19 Jun 2013 01:14:20 +0000 (03:14 +0200)]
drm/prime: Honor requested file flags when exporting a buffer
The DRM PRIME API passes file flags to the driver for the exported
buffer. Honor them instead of hardcoding 0600.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Randy Dunlap [Tue, 18 Jun 2013 19:33:40 +0000 (12:33 -0700)]
x86: fix build error and kconfig for ia32_emulation and binfmt
Fix kconfig warning and build errors on x86_64 by selecting BINFMT_ELF
when COMPAT_BINFMT_ELF is being selected.
warning: (IA32_EMULATION) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF)
fs/built-in.o: In function `elf_core_dump':
compat_binfmt_elf.c:(.text+0x3e093): undefined reference to `elf_core_extra_phdrs'
compat_binfmt_elf.c:(.text+0x3ebcd): undefined reference to `elf_core_extra_data_size'
compat_binfmt_elf.c:(.text+0x3eddd): undefined reference to `elf_core_write_extra_phdrs'
compat_binfmt_elf.c:(.text+0x3f004): undefined reference to `elf_core_write_extra_data'
[ hpa: This was sent to me for -next but it is a low risk build fix ]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: http://lkml.kernel.org/r/51C0B614.5000708@infradead.org
Cc: <stable@vger.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
John David Anglin [Sun, 2 Jun 2013 16:21:48 +0000 (12:21 -0400)]
parisc: Use unshadowed index register for flush instructions in flush_dcache_page_asm and flush_icache_page_asm
The comment at the start of pacache.S states that the base and index
registers used for fdc,fic, and pdc instructions should not use shadowed
registers. Although this is probably unnecessary for tmpalias flushes,
there is also no reason not to comply.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Thomas Bogendoerfer [Fri, 14 Jun 2013 07:05:41 +0000 (09:05 +0200)]
parisc: provide pci_mmap_page_range() for parisc
pci_mmap_page_range() is needed for X11-server support on C8000 with ATI
FireGL card.
Signed-off-by Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Thomas Bogendoerfer [Sun, 9 Jun 2013 21:00:21 +0000 (23:00 +0200)]
parisc: fix serial ports on C8000 workstation
The C8000 workstation (64 bit kernel only) has a somewhat different
serial port configuration than other models.
Thomas Bogendoerfer sent a patch to fix this in September 2010, which
was now minimally modified by me.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Wed, 5 Jun 2013 20:50:01 +0000 (20:50 +0000)]
parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 (part 2)
Make sure that we really return -1 (instead of 0x00ff) as node id for
page frame numbers which are not physically available.
This finally fixes the kernel panic when running
cat /proc/kpageflags /proc/kpagecount.
Theoretically this patch now limits the number of physical memory ranges
to 127 instead of 254, but currently we have MAX_PHYSMEM_RANGES
hardcoded to 8 which is sufficient for all existing parisc machines.
Signed-off-by: Helge Deller <deller@gmx.de>
Ming Lei [Sat, 15 Jun 2013 08:36:38 +0000 (16:36 +0800)]
firmware loader: fix use-after-free by double abort
fw_priv->buf is accessed in both request_firmware_load() and
writing to sysfs file of 'loading' context, but not protected
by 'fw_lock' entirely. The patch makes sure that access on
'fw_priv->buf' is protected by the lock.
So fixes the double abort problem reported by nirinA raseliarison:
http://lkml.org/lkml/2013/6/14/188
Reported-and-tested-by: nirinA raseliarison <nirina.raseliarison@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable <stable@vger.kernel.org> # 3.9
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
George Spelvin [Mon, 17 Jun 2013 05:45:50 +0000 (01:45 -0400)]
usb: phy: Improve Kconfig help for CONFIG_USB_PHY
The previous text confused users by not describing the very common
(e.g. x86 PC) sitations where no PHY driver is necessary.
Signed-off-by: George Spelvin <linux@horizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yinghai Lu [Thu, 13 Jun 2013 20:17:02 +0000 (13:17 -0700)]
range: Do not add new blank slot with add_range_with_merge
Joshua reported: Commit
cd7b304dfaf1 (x86, range: fix missing merge
during add range) broke mtrr cleanup on his setup in 3.9.5.
corresponding commit in upstream is
fbe06b7bae7c.
The reason is add_range_with_merge could generate blank spot.
We could avoid that by searching new expanded start/end, that
new range should include all connected ranges in range array.
At last add the new expanded start/end to the range array.
Also move up left array so do not add new blank slot in the
range array.
-v2: move left array to avoid enhance add_range()
-v3: include fix from Joshua about memmove declaring when
DYN_DEBUG is used.
Reported-by: Joshua Covington <joshuacov@googlemail.com>
Tested-by: Joshua Covington <joshuacov@googlemail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1371154622-8929-3-git-send-email-yinghai@kernel.org
Cc: <stable@vger.kernel.org> v3.9
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Yinghai Lu [Thu, 13 Jun 2013 20:17:01 +0000 (13:17 -0700)]
x86, mtrr: Fix original mtrr range get for mtrr_cleanup
Joshua reported: Commit
cd7b304dfaf1 (x86, range: fix missing merge
during add range) broke mtrr cleanup on his setup in 3.9.5.
corresponding commit in upstream is
fbe06b7bae7c.
*BAD*gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: -0G
https://bugzilla.kernel.org/show_bug.cgi?id=59491
So it rejects new var mtrr layout.
It turns out we have some problem with initial mtrr range retrieval.
The current sequence is:
x86_get_mtrr_mem_range
==> bunchs of add_range_with_merge
==> bunchs of subract_range
==> clean_sort_range
add_range_with_merge for [0,1M)
sort_range()
add_range_with_merge could have blank slots, so we can not just
sort only, that will have final result have extra blank slot in head.
So move that calling add_range_with_merge for [0,1M), with that we
could avoid extra clean_sort_range calling.
Reported-by: Joshua Covington <joshuacov@googlemail.com>
Tested-by: Joshua Covington <joshuacov@googlemail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1371154622-8929-2-git-send-email-yinghai@kernel.org
Cc: <stable@vger.kernel.org> v3.9
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Linus Torvalds [Tue, 18 Jun 2013 16:29:19 +0000 (06:29 -1000)]
Merge tag 'please-pull-fixia64' of git://git./linux/kernel/git/aegl/linux
Pull ia64 build fix from Tony Luck:
"Fix ia64 build breakage by adding newly needed #include"
We're still debating the patch that caused the build breakage, but this
fix seems like a good idea regardless of how that ends up being handled.
* tag 'please-pull-fixia64' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
[IA64] Fix include dependency in asm/irqflags.h
Linus Torvalds [Tue, 18 Jun 2013 16:27:47 +0000 (06:27 -1000)]
Merge branch 'slab/urgent' of git://git./linux/kernel/git/penberg/linux
Pull SLAB fix from Pekka Enberg:
"A slab regression fix by Sasha Levin"
* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
slab: prevent warnings when allocating with __GFP_NOWARN
Linus Torvalds [Tue, 18 Jun 2013 16:26:14 +0000 (06:26 -1000)]
Merge tag 'sound-3.10' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only driver/device-specific small fixes that are pretty safe to apply:
- USB-audio Android and Logitech webcam fixes
- HD-audio MacBook Air 4,2 quirk
- Complete Dell headset quirk entries that were introduced in 3.10"
* tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add models for Dell headset jacks
ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310
ALSA: hda - Fix pin configurations for MacBook Air 4,2
ALSA: usb-audio: work around Android accessory firmware bug
ALSA: hda - Headset mic support for three more machines
Linus Torvalds [Tue, 18 Jun 2013 16:25:08 +0000 (06:25 -1000)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Series of fixes for 3.10. There are some usual driver fixes (mostly
on s5p/exynos playform drivers), plus some fixes at V4L2 core"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (40 commits)
[media] soc_camera: error dev remove and v4l2 call
[media] sh_veu: fix the buffer size calculation
[media] sh_veu: keep power supply until the m2m context is released
[media] sh_veu: invoke v4l2_m2m_job_finish() even if a job has been aborted
[media] v4l2-ioctl: don't print the clips list
[media] v4l2-ctrls: V4L2_CTRL_CLASS_FM_RX controls are also valid radio controls
[media] cx88: fix NULL pointer dereference
[media] DocBook/media/v4l: update version number
[media] exynos4-is: Remove "sysreg" clock handling
[media] exynos4-is: Fix reported colorspace at FIMC-IS-ISP subdev
[media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured
[media] exynos4-is: Prevent NULL pointer dereference when firmware isn't loaded
[media] s5p-mfc: Add NULL check for allocated buffer
[media] s5p-mfc: added missing end-of-lines in debug messages
[media] s5p-mfc: v4l2 controls setup routine moved to initialization code
[media] s5p-mfc: separate encoder parameters for h264 and mpeg4
[media] s5p-mfc: Remove special clock usage in driver
[media] s5p-mfc: Remove unused s5p_mfc_get_decoded_status_v6() function
[media] v4l2: mem2mem: save irq flags correctly
[media] coda: v4l2-compliance fix: add VIDIOC_CREATE_BUFS support
...
Linus Torvalds [Tue, 18 Jun 2013 16:23:51 +0000 (06:23 -1000)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux
Pull clock framework fixes from Mike Turquette:
"Half of the fixes here are for Exynos5, fixing regressions in CPUfreq
due to the common clock framework conversion as well as one fix which
allows the platform to properly reboot again.
One core framework fix patches up a memory leak, another fixes a build
error for the SPEAr platform and finally a Tegra-specific fix allows
PCIe to initialize properly on that platform again"
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
ARM: tegra30: clocks: Fix pciex clock registration
clk: exynos5250: Add CLK_IGNORE_UNUSED flag for pmu clock
clk: spear: fix build error for spear3xx
clk: samsung: Fix pll36xx_recalc_rate to handle kdiv properly
clk: exynos5250: Add sclk_mpll to the parent list of mout_cpu clock
clk: exynos5250: Update cpufreq related clocks for EXYNOS5250
clk: remove notifier from list before freeing it
Zhanghaoyu (A) [Fri, 14 Jun 2013 07:36:13 +0000 (07:36 +0000)]
KVM: x86: remove vcpu's CPL check in host-invoked XCR set
__kvm_set_xcr function does the CPL check when set xcr. __kvm_set_xcr is
called in two flows, one is invoked by guest, call stack shown as below,
handle_xsetbv(or xsetbv_interception)
kvm_set_xcr
__kvm_set_xcr
the other one is invoked by host, for example during system reset:
kvm_arch_vcpu_ioctl
kvm_vcpu_ioctl_x86_set_xcrs
__kvm_set_xcr
The former does need the CPL check, but the latter does not.
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Haoyu <haoyu.zhang@huawei.com>
[Tweaks to commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Daney [Sun, 16 Jun 2013 20:06:28 +0000 (13:06 -0700)]
[IA64] Fix include dependency in asm/irqflags.h
asm/kregs.h isn't always included first, so we need an explicit include.
[Fix build breakage introduced by
f21afc25f9ed45b8ffe200d0f071b0caec3ed2ef
smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu().]
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Stephen Warren [Fri, 14 Jun 2013 15:14:14 +0000 (16:14 +0100)]
ARM: 7759/1: decouple CPU offlining from reboot/shutdown
Add comments to machine_shutdown()/halt()/power_off()/restart() that
describe their purpose and/or requirements re: CPUs being active/not.
In machine_shutdown(), replace the call to smp_send_stop() with a call to
disable_nonboot_cpus(). This completely disables all but one CPU, thus
satisfying the requirement that only a single CPU be active for kexec.
Adjust Kconfig dependencies for this change.
In machine_halt()/power_off()/restart(), call smp_send_stop() directly,
rather than via machine_shutdown(); these functions don't need to
completely de-activate all CPUs using hotplug, but rather just quiesce
them.
Remove smp_kill_cpus(), and its call from smp_send_stop().
smp_kill_cpus() was indirectly calling smp_ops.cpu_kill() without calling
smp_ops.cpu_die() on the target CPUs first. At least some implementations
of smp_ops had issues with this; it caused cpu_kill() to hang on Tegra,
for example. Since smp_send_stop() is only used for shutdown, halt, and
power-off, there is no need to attempt any kind of CPU hotplug here.
Adjust Kconfig to reflect that machine_shutdown() (and hence kexec)
relies upon disable_nonboot_cpus(). However, this alone doesn't guarantee
that hotplug will work, or even that hotplug is implemented for a
particular piece of HW that a multi-platform zImage runs on. Hence, add
error-checking to machine_kexec() to determine whether it did work.
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Zhangfei Gao <zhangfei.gao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Peter Hurley [Thu, 13 Jun 2013 19:56:37 +0000 (15:56 -0400)]
tty: Fix transient pty write() EIO
Commit
699390354da6c258b65bf8fa79cfd5feaede50b6
('pty: Ignore slave pty close() if never successfully opened')
introduced a bug with ptys whereby a write() in parallel with an
open() on an existing pty could mistakenly indicate an I/O error.
Only indicate an I/O error if the condition on open() actually exists.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Cc: stable <stable@vger.kernel.org> # 3.9
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ross Lagerwall [Fri, 14 Jun 2013 22:24:25 +0000 (23:24 +0100)]
tty/vt: Return EBUSY if deallocating VT1 and it is busy
Commit
421b40a6286e ("tty/vt: Fix vc_deallocate() lock order") changed
the behavior when deallocating VT 1. Previously if trying to
deallocate VT1 and it is busy, we would return EBUSY. The commit
changed this to return 0 (success).
This commit restores the old behavior.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Acked-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gianluca Gennari [Sun, 2 Jun 2013 20:24:24 +0000 (17:24 -0300)]
[media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tuner
As suggested by Antti, this patch replaces:
https://patchwork.kernel.org/patch/
2649861/
The buffer overflow is fixed by reading only the r820t ID register.
Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Padmavathi Venna [Wed, 12 Jun 2013 08:23:44 +0000 (13:53 +0530)]
ARM: dts: Correct the base address of pinctrl_3 on Exynos5250
This patch corrects the base address of pinctrl_3 on Exynos5250
platform.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Magnus Damm [Wed, 12 Jun 2013 09:56:43 +0000 (10:56 +0100)]
ARM: 7756/1: zImage/virt: remove hyp-stub.S during distclean
Make sure hyp-stub.S gets removed during make distclean,
this left over file was introduced in commit:
424e599 ARM: zImage/virt: hyp mode entry support for the zImage loader
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Dave Martin <dave.martin@linaro.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Simon Baatz [Mon, 10 Jun 2013 20:10:12 +0000 (21:10 +0100)]
ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
Commit
f8b63c1 made flush_kernel_dcache_page a no-op assuming that
the pages it needs to handle are kernel mapped only. However, for
example when doing direct I/O, pages with user space mappings may
occur.
Thus, continue to do lazy flushing if there are no user space
mappings. Otherwise, flush the kernel cache lines directly.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> # 3.2+
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Gregory CLEMENT [Mon, 10 Jun 2013 17:05:51 +0000 (18:05 +0100)]
ARM: 7754/1: Fix the CPU ID and the mask associated to the PJ4B
This commit fixes the ID and mask for the PJ4B which was too
restrictive and didn't match the CPU of the Armada 370 SoC.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Po-Yu Chuang [Fri, 7 Jun 2013 11:15:45 +0000 (12:15 +0100)]
ARM: 7753/1: map_init_section flushes incorrect pmd
This bug was introduced in commit
e651eab0.
Some v4/v5 platforms failed to boot due to this.
Signed-off-by: Po-Yu Chuang <ratbert.chuang@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Jon Medhurst [Fri, 7 Jun 2013 09:35:35 +0000 (10:35 +0100)]
ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect
On Cortex-A9 before version r1p0, the LoUIS bit field of the CLIDR
register returns zero when it should return one. This leads to cache
maintenance operations which rely on this value to not function as
intended, causing data corruption.
The workaround for this errata is to detect affected CPUs and correct
the LoUIS value read.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
David Henningsson [Mon, 17 Jun 2013 09:04:02 +0000 (11:04 +0200)]
ALSA: hda - Add models for Dell headset jacks
These headset jacks keep coming in on more and more platforms, and
it's possible I don't catch them all. Make it easier to test and
verify by making models.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 17 Jun 2013 08:25:02 +0000 (10:25 +0200)]
ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310
Just like the previous fix for LogitechHD Webcam c270 in commit
11e7064f35bb87da8f427d1aa4bbd8b7473a3993, c310 model also requires the
same workaround for avoiding the kernel warning.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 17 Jun 2013 08:19:49 +0000 (10:19 +0200)]
ALSA: hda - Fix pin configurations for MacBook Air 4,2
MacBook Air 4,2 requires the whole default pin configuration table to
be overridden by the driver, as usual, as Apple's machines don't set
up properly after boot. Otherwise mic won't work, and other ill
effect may happen.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59381
Reported-and-tested-by: Peter John Hartman <peterjohnhartman@gmail.com>
Cc: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>