OSDN Git Service
Linus Torvalds [Mon, 3 Jul 2023 19:46:47 +0000 (12:46 -0700)]
Merge tag 'char-misc-6.5-rc1' of git://git./linux/kernel/git/gregkh/char-misc
Pull Char/Misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates on top of that, lots of
small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
bsr: fix build problem with bsr_class static cleanup
comedi: make all 'class' structures const
char: xillybus: make xillybus_class a static const structure
xilinx_hwicap: make icap_class a static const structure
virtio_console: make port class a static const structure
ppdev: make ppdev_class a static const structure
char: misc: make misc_class a static const structure
/dev/mem: make mem_class a static const structure
char: lp: make lp_class a static const structure
dsp56k: make dsp56k_class a static const structure
bsr: make bsr_class a static const structure
oradax: make 'cl' a static const structure
hwtracing: hisi_ptt: Fix potential sleep in atomic context
hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
hwtracing: hisi_ptt: Export available filters through sysfs
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
hwtracing: hisi_ptt: Factor out filter allocation and release operation
samples: pfsm: add CC_CAN_LINK dependency
misc: fastrpc: check return value of devm_kasprintf()
coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
...
Linus Torvalds [Mon, 3 Jul 2023 18:31:01 +0000 (11:31 -0700)]
Merge tag 'backlight-next-6.5' of git://git./linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Add lots of Device Tree bindings / support
- Turn off LED strings when display is blank
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous NULL checks
- Only obtain PWM information once and do it in .probe()
Fix-ups:
- Ensure locks are obtained and held when required"
* tag 'backlight-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: led_bl: Take led_access lock when required
video: backlight: lp855x: Get PWM for PWM mode during probe
dt-bindings: backlight: lp855x: Convert to YAML and modernize
dt-bindings: backlight: pwm: Make power-supply not required
backlight: pwm_bl: Remove unneeded checks for valid GPIOs
backlight: Switch i2c drivers back to use .probe()
backlight: lm3630a: Turn off both led strings when display is blank
dt-bindings: leds: backlight: ktz8866: Add reg property and update example
Linus Torvalds [Mon, 3 Jul 2023 18:26:05 +0000 (11:26 -0700)]
Merge tag 'leds-next-6.5' of git://git./linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
New Device Support:
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
New Functionality:
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
Fix-ups:
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
Bug Fixes:
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues"
* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
leds: sgm3140: Add richtek,rt5033-led compatible
dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
dt-bindings: leds: Drop unneeded quotes
leds: Fix config reference for AW200xx driver
leds: leds-mt6323: Add support for WLEDs and MT6332
leds: leds-mt6323: Add support for MT6331 leds
leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
leds: leds-mt6323: Specify registers and specs in platform data
dt-bindings: leds: leds-mt6323: Document mt6332 compatible
dt-bindings: leds: leds-mt6323: Document mt6331 compatible
leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
leds: simatic-ipc-leds-gpio: Split up into multiple drivers
leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
leds: cht-wcove: Remove unneeded semicolon
leds: cht-wcove: Fix an unsigned comparison which can never be negative
...
Linus Torvalds [Mon, 3 Jul 2023 17:55:04 +0000 (10:55 -0700)]
Merge tag 'mfd-next-6.5' of git://git./linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for TI TPS6594/TPS6593/LP8764 PMICs
- Add support for Samsung RT5033 Battery Charger
- Add support for Analog Devices MAX77540 and MAX77541 PMICs
New Device Support:
- Add support for SPI to Rockchip RK808 (and friends)
- Add support for AXP192 PMIC to X-Powers AXP20X
- Add support for AXP313a PMIC to X-Powers AXP20X
- Add support for RK806 to Rockchip RK8XX
Removed Device Support:
- Removed MFD support for Richtek RT5033 Battery
Fix-ups:
- Remove superfluous code
- Switch I2C drivers from .probe_new() to .probe()
- Convert over to managed resources (devm_*(), etc)
- Use dev_err_probe() for returning errors from .probe()
- Add lots of Device Tree bindings / support
- Improve cache efficiency by switching to Maple
- Use own exported namespaces (NS)
- Include missing and remove superfluous headers
- Start using / convert to the new shutdown sys-off API
- Trivial: variable / define renaming
- Make use of of_property_read_reg() when requesting DT 'reg's
Bug Fixes:
- Fix chip revision readout due to incorrect data masking
- Amend incorrect register and mask values used for charger state
- Hide unused functionality at compile time
- Fix resource leaks following error handling routines
- Return correct error values and fix error handling in general
- Repair incorrect device names - used for device matching
- Remedy broken module auto-loading"
* tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits)
dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
iio: adc: max77541: Add ADI MAX77541 ADC Support
regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
mfd: Switch two more drivers back to use struct i2c_driver::probe
dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties
mfd: stmpe: Only disable the regulators if they are enabled
mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes
mfd: core: Use of_property_read_reg() to parse "reg"
mfd: stmfx: Nullify stmfx->vdd in case of error
mfd: stmfx: Fix error path in stmfx_chip_init
mfd: intel-lpss: Add missing check for platform_get_resource
mfd: stpmic1: Add PMIC poweroff via sys-off handler
mfd: stpmic1: Fixup main control register and bits naming
dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074
mfd: tps65219: Add support for soft shutdown via sys-off API
mfd: pm8008: Drop bogus i2c module alias
mfd: pm8008: Fix module autoloading
mfd: tps65219: Add GPIO cell instance
...
Linus Torvalds [Mon, 3 Jul 2023 17:47:21 +0000 (10:47 -0700)]
Merge tag 'mailbox-v6.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- tegra: support for Tegra264
- broadcom: convert bcm2835 bindings from txt to yaml bcm2835
- qcom: support for IPQ5018
- ti: always zero TX data fields
* tag 'mailbox-v6.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0
mailbox: tegra: add support for Tegra264
dt-bindings: mailbox: tegra: Document Tegra264 HSP
dt-bindings: mailbox: convert bcm2835-mbox bindings to YAML
dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible
Linus Torvalds [Mon, 3 Jul 2023 17:43:10 +0000 (10:43 -0700)]
Merge tag 'rtc-6.5' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The isl1208 dirver was reworked tobe able to work as part of an MFD.
All the Loongson chips are now supported through a new driver, the old
one is removed.
Summary:
Subsystem:
- Switch i2c drivers back to use .probe()
- Constify pointers to hwmon_channel_info
New driver:
- Loongson on chip RTC, replacing the Loongson 1 only driver
Drivers:
- isl1208: cleanup and support for RAA215300
- st-lpc: cleanups
- stm32: fix wakeup"
* tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (21 commits)
rtc: Add rtc driver for the Loongson family chips
rtc: Remove the Loongson-1 RTC driver
dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles
rtc: rv3028: make rv3028 probeable from userspace
rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300
rtc: isl1208: Add isl1208_set_xtoscb()
rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[]
rtc: isl1208: Make similar I2C and DT-based matching table
rtc: isl1208: Drop name variable
dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties
dt-bindings: rtc: isl1208: Convert to json-schema
rtc: st-lpc: Simplify clk handling in st_rtc_probe()
rtc: st-lpc: Release some resources in st_rtc_probe() in case of error
rtc: stm32: remove dedicated wakeup management
dt-bindings: rtc: restrict node name suffixes
rtc: add HAS_IOPORT dependencies
rtc: Switch i2c drivers back to use .probe()
rtc: rv3032: constify pointers to hwmon_channel_info
rtc: isl12022: constify pointers to hwmon_channel_info
rtc: ds3232: constify pointers to hwmon_channel_info
...
Linus Torvalds [Mon, 3 Jul 2023 17:33:23 +0000 (10:33 -0700)]
Merge tag 'i3c/for-6.5' of git://git./linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
- svc: fix suspend/resume on some platforms, fix locking issues
* tag 'i3c/for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: add NACK check after start byte sent
i3c: master: svc: fix cpu schedule in spin lock
i3c: master: svc: fix i3c suspend/resume issue
Linus Torvalds [Mon, 3 Jul 2023 17:08:50 +0000 (10:08 -0700)]
mm: validate the mm before dropping the mmap lock
Commit
408579cd627a ("mm: Update do_vmi_align_munmap() return
semantics") made the return value and locking semantics of
do_vmi_align_munmap() more straightforward, but in the process it ended
up unlocking the mmap lock just a tad too early: the debug code doing
the mmap layout validation still needs to run with the lock held, or
things might change under it while it's trying to validate things.
So just move the unlocking to after the validate_mm() call.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/ZKIsoMOT71uwCIZX@xsang-OptiPlex-9020/
Fixes:
408579cd627a ("mm: Update do_vmi_align_munmap() return semantics")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 3 Jul 2023 06:20:17 +0000 (23:20 -0700)]
execve: always mark stack as growing down during early stack setup
While our user stacks can grow either down (all common architectures) or
up (parisc and the ia64 register stack), the initial stack setup when we
copy the argument and environment strings to the new stack at execve()
time is always done by extending the stack downwards.
But it turns out that in commit
8d7071af8907 ("mm: always expand the
stack with the mmap write lock held"), as part of making the stack
growing code more robust, 'expand_downwards()' was now made to actually
check the vma flags:
if (!(vma->vm_flags & VM_GROWSDOWN))
return -EFAULT;
and that meant that this execve-time stack expansion started failing on
parisc, because on that architecture, the stack flags do not contain the
VM_GROWSDOWN bit.
At the same time the new check in expand_downwards() is clearly correct,
and simplified the callers, so let's not remove it.
The solution is instead to just codify the fact that yes, during
execve(), the stack grows down. This not only matches reality, it ends
up being particularly simple: we already have special execve-time flags
for the stack (VM_STACK_INCOMPLETE_SETUP) and use those flags to avoid
page migration during this setup time (see vma_is_temporary_stack() and
invalid_migration_vma()).
So just add VM_GROWSDOWN to that set of temporary flags, and now our
stack flags automatically match reality, and the parisc stack expansion
works again.
Note that the VM_STACK_INCOMPLETE_SETUP bits will be cleared when the
stack is finalized, so we only add the extra VM_GROWSDOWN bit on
CONFIG_STACK_GROWSUP architectures (ie parisc) rather than adding it in
general.
Link: https://lore.kernel.org/all/612eaa53-6904-6e16-67fc-394f4faa0e16@bell.net/
Link: https://lore.kernel.org/all/5fd98a09-4792-1433-752d-029ae3545168@gmx.de/
Fixes:
8d7071af8907 ("mm: always expand the stack with the mmap write lock held")
Reported-by: John David Anglin <dave.anglin@bell.net>
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 2 Jul 2023 18:14:54 +0000 (11:14 -0700)]
Merge tag 'iomap-6.5-merge-1' of git://git./fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
- Fix a type signature mismatch
- Drop Christoph as maintainer
* tag 'iomap-6.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: drop me [hch] from MAINTAINERS for iomap
fs: iomap: Change the type of blocksize from 'int' to 'unsigned int' in iomap_file_buffered_write_punch_delalloc
Linus Torvalds [Sun, 2 Jul 2023 18:10:22 +0000 (11:10 -0700)]
Merge tag 'v6.5/vfs.fixes' of git://git./linux/kernel/git/vfs/vfs
Pull vfs fix from Christian Brauner:
"A fix for the backing file work from this cycle.
When init_file() failed it would call file_free_rcu() on the file
allocated by the caller of init_file(). It naively assumed that the
correct cleanup operation would be called depending on whether it is a
regular file or a backing file. However, that presupposes that the
FMODE_BACKING flag would already be set which it won't be as that is
done in the caller of init_file().
Fix that bug by moving the cleanup of the allocated file into the
caller where it belongs in the first place. There's no good reason for
init_file() to consume resources it didn't allocate. This is a
mainline only fix and was reported by syzbot. The fix was validated by
syzbot against the provided reproducer"
* tag 'v6.5/vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: move cleanup from init_file() into its callers
Linus Torvalds [Sun, 2 Jul 2023 17:22:38 +0000 (10:22 -0700)]
Merge tag 'i2c-for-6.5-rc1' of git://git./linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- I2C has now a co-maintainer taking care of the host drivers. Welcome
Andi Shyti and have fun!
- platform remove callback converted to return void in drivers
- simplify drivers by using devm_clk_get_enabled()
- introduce i2c_get_match_data() to avoid more boilerplate code
(especially since the core stopped delivering an i2c_device_id)
- and the usual bunch of driver updates
* tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
i2c: uniphier: Use devm_clk_get_enabled()
i2c: uniphier-f: Use devm_clk_get_enabled()
i2c: owl: Use devm_clk_get_enabled()
i2c: lpc2k: Use devm_clk_get_enabled()
i2c: hix5hd2: Use devm_clk_get_enabled()
i2c: sun6i-p2wi: Use devm_clk_get_enabled()
i2c: pasemi-platform: Use devm_clk_get_enabled()
i2c: mt7621: Use devm_clk_get_enabled()
i2c: xiic: Use devm_clk_get_enabled()
i2c: davinci: Use platform table macro over module_alias
i2c: ocores: use devm_ managed clks
i2c: nomadik: Use dev_err_probe() whenever possible
i2c: nomadik: Use devm_clk_get_enabled()
i2c: nomadik: Remove unnecessary goto label
usb: typec: ucsi: Mark dGPUs as DEVICE scope
i2c: wmt: Use devm_platform_get_and_ioremap_resource()
i2c: versatile: Use devm_platform_get_and_ioremap_resource()
i2c: hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver.
i2c: mpc: Use of_property_read_reg() to parse "reg"
i2c: imx-lpi2c: Don't open-code DIV_ROUND_UP
...
Linus Torvalds [Sun, 2 Jul 2023 17:02:35 +0000 (10:02 -0700)]
Merge tag 'parisc-for-6.5-rc1' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Add missing cacheflush() syscall
- Fix STI console on 64-bit-only machines
- Move kernel debug options to Kconfig.debug
- Lots of warning fixes in arch/parisc/ and drivers/parisc/ when
compiled with W=1
- Enable some more graphics drivers in refreshed defconfigs
* tag 'parisc-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (29 commits)
parisc: Refresh defconfigs
parisc: irq: Add irq-related function declarations
parisc: Move init function declarations into header file
parisc: dino: Make dino_init() returning void
parisc: lba_pci: Mark two variables __maybe_unused
parisc: unaligned: Include header file to avoid missing prototype warnings
parisc: signal: Mark do_notify_resume() and sys_rt_sigreturn() asmlinkage
parisc: unwind: Mark start and stop variables __maybe_unused
parisc: init: Drop unused variable end_paddr
parisc: traps: Mark functions static
parisc: processor: Fix kdoc for init_cpu_profiler()
parisc: sys_parisc: parisc_personality() is called from asm code
parisc: ccio-dma: Fix kdoc and compiler warnings
parisc: pdc_stable: Fix kdoc and compiler warnings
parisc: pci-dma: Make pcxl_alloc_range() static
parisc: Mark image_size __maybe_unused in perf_write()
parisc: module: Mark symindex __maybe_unused
parisc: pdc_chassis: Fix kdoc warnings
parisc: firmware: Fix kdoc warnings
parisc: drivers: Fix kdoc warnings
...
Amir Goldstein [Sat, 1 Jul 2023 17:11:34 +0000 (20:11 +0300)]
fs: move cleanup from init_file() into its callers
The use of file_free_rcu() in init_file() to free the struct that was
allocated by the caller was hacky and we got what we deserved.
Let init_file() and its callers take care of cleaning up each after
their own allocated resources on error.
Fixes:
62d53c4a1dfe ("fs: use backing_file container for internal files with "fake" f_path") # mainline only
Reported-and-tested-by: syzbot+ada42aab05cf51b00e98@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <
20230701171134.239409-1-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Linus Torvalds [Sun, 2 Jul 2023 04:12:32 +0000 (21:12 -0700)]
Merge tag 'csky-for-linus-6.5' of https://github.com/c-sky/csky-linux
Pull arch/csky update from Guo Ren:
- Correct thread.trap_no restore of uprobe
* tag 'csky-for-linus-6.5' of https://github.com/c-sky/csky-linux:
csky: uprobes: Restore thread.trap_no
Linus Torvalds [Sat, 1 Jul 2023 21:38:25 +0000 (14:38 -0700)]
Merge tag 'nfs-for-6.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Stable fixes and other bugfixes:
- nfs: don't report STATX_BTIME in ->getattr
- Revert 'NFSv4: Retry LOCK on OLD_STATEID during delegation return'
since it breaks NFSv4 state recovery.
- NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
- Fix the NFSv4.2 xattr cache shrinker_id
- Force a ctime update after a NFSv4.2 SETXATTR call
Features and cleanups:
- NFS and RPC over TLS client code from Chuck Lever
- Support for use of abstract unix socket addresses with the rpcbind
daemon
- Sysfs API to allow shutdown of the kernel RPC client and prevent
umount() hangs if the server is known to be permanently down
- XDR cleanups from Anna"
* tag 'nfs-for-6.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (33 commits)
Revert "NFSv4: Retry LOCK on OLD_STATEID during delegation return"
NFS: Don't cleanup sysfs superblock entry if uninitialized
nfs: don't report STATX_BTIME in ->getattr
NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
NFSv4.2: fix wrong shrinker_id
NFSv4: Clean up some shutdown loops
NFS: Cancel all existing RPC tasks when shutdown
NFS: add sysfs shutdown knob
NFS: add a sysfs link to the acl rpc_client
NFS: add a sysfs link to the lockd rpc_client
NFS: Add sysfs links to sunrpc clients for nfs_clients
NFS: add superblock sysfs entries
NFS: Make all of /sys/fs/nfs network-namespace unique
NFS: Open-code the nfs_kset kset_create_and_add()
NFS: rename nfs_client_kobj to nfs_net_kobj
NFS: rename nfs_client_kset to nfs_kset
NFS: Add an "xprtsec=" NFS mount option
NFS: Have struct nfs_client carry a TLS policy field
SUNRPC: Add a TCP-with-TLS RPC transport class
SUNRPC: Capture CMSG metadata on client-side receive
...
Linus Torvalds [Sat, 1 Jul 2023 18:40:01 +0000 (11:40 -0700)]
Merge tag 'x86-urgent-2023-07-01' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single regression fix for x86:
Moving the invocation of arch_cpu_finalize_init() earlier in the boot
process caused a boot regression on IBT enabled system.
The root cause is not the move of arch_cpu_finalize_init() itself. The
system fails to boot because the subsequent efi_enter_virtual_mode()
code has a non-IBT safe EFI call inside. This was not noticed before
because IBT was enabled after the EFI initialization.
Switching the EFI call to use the IBT safe wrapper cures the problem"
* tag 'x86-urgent-2023-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Make efi_set_virtual_address_map IBT safe
Linus Torvalds [Sat, 1 Jul 2023 16:24:31 +0000 (09:24 -0700)]
Merge tag 'kbuild-v6.5' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the deprecated rule to build *.dtbo from *.dts
- Refactor section mismatch detection in modpost
- Fix bogus ARM section mismatch detections
- Fix error of 'make gtags' with O= option
- Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
with the latest LLVM version
- Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
- Ignore more compiler-generated symbols for kallsyms
- Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
- Enable more kernel-doc warnings with W=2
- Refactor <linux/export.h> by generating KSYMTAB data by modpost
- Deprecate <asm/export.h> and <asm-generic/export.h>
- Remove the EXPORT_DATA_SYMBOL macro
- Move the check for static EXPORT_SYMBOL back to modpost, which makes
the build faster
- Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
- Warn missing MODULE_DESCRIPTION when building modules with W=1
- Make 'make clean' robust against too long argument error
- Exclude more objects from GCOV to fix CFI failures with GCOV
- Allow 'make modules_install' to install modules.builtin and
modules.builtin.modinfo even when CONFIG_MODULES is disabled
- Include modules.builtin and modules.builtin.modinfo in the
linux-image Debian package even when CONFIG_MODULES is disabled
- Revive "Entering directory" logging for the latest Make version
* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
modpost: define more R_ARM_* for old distributions
kbuild: revive "Entering directory" for Make >= 4.4.1
kbuild: set correct abs_srctree and abs_objtree for package builds
scripts/mksysmap: Ignore prefixed KCFI symbols
kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
kbuild: builddeb: always make modules_install, to install modules.builtin*
modpost: continue even with unknown relocation type
modpost: factor out Elf_Sym pointer calculation to section_rel()
modpost: factor out inst location calculation to section_rel()
kbuild: Disable GCOV for *.mod.o
kbuild: Fix CFI failures with GCOV
kbuild: make clean rule robust against too long argument error
script: modpost: emit a warning when the description is missing
kbuild: make modules_install copy modules.builtin(.modinfo)
linux/export.h: rename 'sec' argument to 'license'
modpost: show offset from symbol for section mismatch warnings
modpost: merge two similar section mismatch warnings
kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
modpost: use null string instead of NULL pointer for default namespace
modpost: squash sym_update_namespace() into sym_add_exported()
...
Linus Torvalds [Sat, 1 Jul 2023 16:18:25 +0000 (09:18 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix memory corruption (overwriting the kmalloc redzone) when saving
the SVE state while in SVE streaming mode"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: sme: Use STR P to clear FFR context field in streaming SVE mode
Linus Torvalds [Sat, 1 Jul 2023 15:58:41 +0000 (08:58 -0700)]
Merge tag 'cxl-for-6.5' of git://git./linux/kernel/git/cxl/cxl
Pull CXL updates from Dan Williams:
"The highlights in terms of new functionality are support for the
standard CXL Performance Monitor definition that appeared in CXL 3.0,
support for device sanitization (wiping all data from a device),
secure-erase (re-keying encryption of user data), and support for
firmware update. The firmware update support is notable as it reuses
the simple sysfs_upload interface to just cat(1) a blob to a sysfs
file and pipe that to the device.
Additionally there are a substantial number of cleanups and
reorganizations to get ready for RCH error handling (RCH == Restricted
CXL Host == current shipping hardware generation / pre CXL-2.0
topologies) and type-2 (accelerator / vendor specific) devices.
For vendor specific devices they implement a subset of what the
generic type-3 (generic memory expander) driver expects. As a result
the rework decouples optional infrastructure from the core driver
context.
For RCH topologies, where the specification working group did not want
to confuse pre-CXL-aware operating systems, many of the standard
registers are hidden which makes support standard bus features like
AER (PCIe Advanced Error Reporting) difficult. The rework arranges for
the driver to help the PCI-AER core. Bjorn is on board with this
direction but a late regression disocvery means the completion of this
functionality needs to cook a bit longer, so it is code
reorganizations only for now.
Summary:
- Add infrastructure for supporting background commands along with
support for device sanitization and firmware update
- Introduce a CXL performance monitoring unit driver based on the
common definition in the specification.
- Land some preparatory cleanup and refactoring for the anticipated
arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
topology) error handling.
- Rework CPU cache management with respect to region configuration
(device hotplug or other dynamic changes to memory interleaving)
- Fix region reconfiguration vs CXL decoder ordering rules"
* tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (51 commits)
cxl: Fix one kernel-doc comment
cxl/pci: Use correct flag for sanitize polling
docs: perf: Minimal introduction the the CXL PMU device and driver
perf: CXL Performance Monitoring Unit driver
tools/testing/cxl: add firmware update emulation to CXL memdevs
tools/testing/cxl: Use named effects for the Command Effect Log
tools/testing/cxl: Fix command effects for inject/clear poison
cxl: add a firmware update mechanism using the sysfs firmware loader
cxl/test: Add Secure Erase opcode support
cxl/mem: Support Secure Erase
cxl/test: Add Sanitize opcode support
cxl/mem: Wire up Sanitization support
cxl/mbox: Add sanitization handling machinery
cxl/mem: Introduce security state sysfs file
cxl/mbox: Allow for IRQ_NONE case in the isr
Revert "cxl/port: Enable the HDM decoder capability for switch ports"
cxl/memdev: Formalize endpoint port linkage
cxl/pci: Unconditionally unmask 256B Flit errors
cxl/region: Manage decoder target_type at decoder-attach time
cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM
...
Linus Torvalds [Sat, 1 Jul 2023 15:48:02 +0000 (08:48 -0700)]
Merge tag 'libnvdimm-for-6.5' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull nvdimm and DAX updates from Vishal Verma:
"This is mostly small cleanups and fixes, with the biggest change being
the change to the DAX fault handler allowing it to return
VM_FAULT_HWPOISON.
Summary:
- DAX fixes and cleanups including a use after free, extra
references, and device unregistration, and a redundant variable.
- Allow the DAX fault handler to return VM_FAULT_HWPOISON
- A few libnvdimm cleanups such as making some functions and
variables static where sufficient.
- Add a few missing prototypes for wrapped functions in
tools/testing/nvdimm"
* tag 'libnvdimm-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: enable dax fault handler to report VM_FAULT_HWPOISON
nvdimm: make security_show static
nvdimm: make nd_class variable static
dax/kmem: Pass valid argument to memory_group_register_static
fsdax: remove redundant variable 'error'
dax: Cleanup extra dax_region references
dax: Introduce alloc_dev_dax_id()
dax: Use device_unregister() in unregister_dax_mapping()
dax: Fix dax_mapping_release() use after free
tools/testing/nvdimm: Drop empty platform remove function
libnvdimm: mark 'security_show' static again
testing: nvdimm: add missing prototypes for wrapped functions
dax: fix missing-prototype warnings
Linus Torvalds [Sat, 1 Jul 2023 15:40:56 +0000 (08:40 -0700)]
Merge tag 'sysctl-fixes-v2-v6.4-rc1' of git://git./linux/kernel/git/mcgrof/linux
Pull another sysctl fix from Luis Chamberlain:
"Just one minor nit I forgot to merge"
* tag 'sysctl-fixes-v2-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: set variable sysctl_mount_point storage-class-specifier to static
Linus Torvalds [Sat, 1 Jul 2023 15:31:07 +0000 (08:31 -0700)]
Merge tag 'flex-array-transformations-6.5-rc1' of git://git./linux/kernel/git/gustavoars/linux
Pull flexible-array update from Gustavo Silva:
"Transform a zero-length array into a C99 flexible-array member.
This addresses a build failure with Clang by fixing multiple
'-Warray-bounds' warnings in drivers/staging/ks7010/ks_wlan_net.c"
* tag 'flex-array-transformations-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
uapi: wireless: Replace zero-length array with flexible-array member
Christian Brauner [Sat, 1 Jul 2023 06:44:44 +0000 (08:44 +0200)]
pid: use struct_size_t() helper
Before commit
d67790ddf021 ("overflow: Add struct_size_t() helper") only
struct_size() existed, which expects a valid pointer instance containing
the flexible array.
However, when we determine the default struct pid allocation size for
the associated kmem cache of a pid namespace we need to take the nesting
depth of the pid namespace into account without an variable instance
necessarily being available.
In commit
b69f0aeb0689 ("pid: Replace struct pid 1-element array with
flex-array") we used to handle this the old fashioned way and cast NULL
to a struct pid pointer type. However, we do apparently have a dedicated
struct_size_t() helper for exactly this case. So switch to that.
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Liam R. Howlett [Fri, 30 Jun 2023 02:28:16 +0000 (22:28 -0400)]
mm: Update do_vmi_align_munmap() return semantics
Since do_vmi_align_munmap() will always honor the downgrade request on
the success, the callers no longer have to deal with confusing return
codes. Since all callers that request downgrade actually want the lock
to be dropped, change the downgrade to an unlock request.
Note that the lock still needs to be held in read mode during the page
table clean up to avoid races with a map request.
Update do_vmi_align_munmap() to return 0 for success. Clean up the
callers and comments to always expect the unlock to be honored on the
success path. The error path will always leave the lock untouched.
As part of the cleanup, the wrapper function do_vmi_munmap() and callers
to the wrapper are also updated.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-mm/20230629191414.1215929-1-willy@infradead.org/
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox (Oracle) [Thu, 29 Jun 2023 19:14:14 +0000 (20:14 +0100)]
mm: Always downgrade mmap_lock if requested
Now that stack growth must always hold the mmap_lock for write, we can
always downgrade the mmap_lock to read and safely unmap pages from the
page table, even if we're next to a stack.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Max Filippov [Sat, 1 Jul 2023 10:31:55 +0000 (03:31 -0700)]
xtensa: fix lock_mm_and_find_vma in case VMA not found
MMU version of lock_mm_and_find_vma releases the mm lock before
returning when VMA is not found. Do the same in noMMU version.
This fixes hang on an attempt to handle protection fault.
Fixes:
d85a143b69ab ("xtensa: fix NOMMU build with lock_mm_and_find_vma() conversion")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 1 Jul 2023 05:00:28 +0000 (22:00 -0700)]
Merge tag '6.5-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Deferred close fix
- Debugging improvements: display missing mount option, dump rc on
invalidate inode failures, print client_guid in DebugData, log
session id when matching session not found in reconnect, new dynamic
tracepoint for session not found
- Mount fixes including: potential null dereference, and possible
memory leak and path name parsing when double slashes
- Fix potential use after free in compounding
- Two crediting (flow control) fixes: fix for crediting leak (stress
scenario with excess lease credits) and better locking around
updating credits
- Three cleanups from issues pointed out by the kernel test robot
- Session state check improvements (including for potential use after
free)
- DFS fixes: Fix for getattr on link when DFS disabled, fix for DFS
mounts to same share with different prefix paths, DFS mount error
checking improvement
* tag '6.5-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: new dynamic tracepoint to track ses not found errors
cifs: log session id when a matching ses is not found
smb: client: improve DFS mount check
smb: client: fix shared DFS root mounts with different prefixes
smb: client: fix parsing of source mount option
smb: client: fix broken file attrs with nodfs mounts
cifs: print client_guid in DebugData
cifs: fix session state check in smb2_find_smb_ses
cifs: fix session state check in reconnect to avoid use-after-free issue
cifs: do all necessary checks for credits within or before locking
cifs: prevent use-after-free by freeing the cfile later
smb: client: fix warning in generic_ip_connect()
smb: client: fix warning in CIFSFindNext()
smb: client: fix warning in CIFSFindFirst()
smb3: do not reserve too many oplock credits
cifs: print more detail when invalidate_inode_mapping fails
smb: client: fix warning in cifs_smb3_do_mount()
smb: client: fix warning in cifs_match_super()
cifs: print nosharesock value while dumping mount options
SMB3: Do not send lease break acknowledgment if all file handles have been closed
Linus Torvalds [Sat, 1 Jul 2023 04:53:33 +0000 (21:53 -0700)]
Merge tag '6.5-rc-ksmbd-server-fixes-part1' of git://git.samba.org/ksmbd
Pull ksmbd server updates from Steve French:
- two fixes for compounding bugs (make sure no out of bound reads with
less common combinations of commands in the compound)
- eight minor cleanup patches (e.g. simplifying return values, replace
one element array, use of kzalloc where simpler)
- fix for clang warning on possible overflow in filename conversion
* tag '6.5-rc-ksmbd-server-fixes-part1' of git://git.samba.org/ksmbd:
ksmbd: avoid field overflow warning
ksmbd: Replace one-element array with flexible-array member
ksmbd: Use struct_size() helper in ksmbd_negotiate_smb_dialect()
ksmbd: add missing compound request handing in some commands
ksmbd: fix out of bounds read in smb2_sess_setup
ksmbd: Replace the ternary conditional operator with min()
ksmbd: use kvzalloc instead of kvmalloc
ksmbd: Change the return value of ksmbd_vfs_query_maximal_access to void
ksmbd: return a literal instead of 'err' in ksmbd_vfs_kern_path_locked()
ksmbd: use kzalloc() instead of __GFP_ZERO
ksmbd: remove unused ksmbd_tree_conn_share function
Linus Torvalds [Sat, 1 Jul 2023 04:48:44 +0000 (21:48 -0700)]
Merge tag 'nfsd-6.5-1' of git://git./linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix ordering of attributes in NFSv4 GETATTR replies
* tag 'nfsd-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: Fix creation time serialization order
Linus Torvalds [Sat, 1 Jul 2023 04:40:44 +0000 (21:40 -0700)]
Merge tag 'livepatching-for-6.5' of git://git./linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- Make a variable static to fix a sparse warning
* tag 'livepatching-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Make 'klp_stack_entries' static
Linus Torvalds [Sat, 1 Jul 2023 04:35:52 +0000 (21:35 -0700)]
Merge tag 'efi-next-for-v6.5' of git://git./linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Although some more stuff is brewing, the EFI changes that are ready
for mainline are few this cycle:
- improve the PCI DMA paranoia logic in the EFI stub
- some constification changes
- add statfs support to efivarfs
- allow user space to enumerate updatable firmware resources without
CAP_SYS_ADMIN"
* tag 'efi-next-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: Disable PCI DMA before grabbing the EFI memory map
efi/esrt: Allow ESRT access without CAP_SYS_ADMIN
efivarfs: expose used and total size
efi: make kobj_type structure constant
efi: x86: make kobj_type structure constant
Linus Torvalds [Sat, 1 Jul 2023 04:27:13 +0000 (21:27 -0700)]
Merge tag 'v6.5-p1' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add linear akcipher/sig API
- Add tfm cloning (hmac, cmac)
- Add statesize to crypto_ahash
Algorithms:
- Allow only odd e and restrict value in FIPS mode for RSA
- Replace LFSR with SHA3-256 in jitter
- Add interface for gathering of raw entropy in jitter
Drivers:
- Fix race on data_avail and actual data in hwrng/virtio
- Add hash and HMAC support in starfive
- Add RSA algo support in starfive
- Add support for PCI device 0x156E in ccp"
* tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits)
crypto: akcipher - Do not copy dst if it is NULL
crypto: sig - Fix verify call
crypto: akcipher - Set request tfm on sync path
crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled
hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS
hwrng: st - keep clock enabled while hwrng is registered
hwrng: st - support compile-testing
hwrng: imx-rngc - fix the timeout for init and self check
KEYS: asymmetric: Use new crypto interface without scatterlists
KEYS: asymmetric: Move sm2 code into x509_public_key
KEYS: Add forward declaration in asymmetric-parser.h
crypto: sig - Add interface for sign/verify
crypto: akcipher - Add sync interface without SG lists
crypto: cipher - On clone do crypto_mod_get()
crypto: api - Add __crypto_alloc_tfmgfp
crypto: api - Remove crypto_init_ops()
crypto: rsa - allow only odd e and restrict value in FIPS mode
crypto: geniv - Split geniv out of AEAD Kconfig option
crypto: algboss - Add missing dependency on RNG2
crypto: starfive - Add RSA algo support
...
Linus Torvalds [Sat, 1 Jul 2023 01:24:49 +0000 (18:24 -0700)]
xtensa: fix NOMMU build with lock_mm_and_find_vma() conversion
It turns out that xtensa has a really odd configuration situation: you
can do a no-MMU config, but still have the page fault code enabled.
Which doesn't sound all that sensible, but it turns out that xtensa can
have protection faults even without the MMU, and we have this:
config PFAULT
bool "Handle protection faults" if EXPERT && !MMU
default y
help
Handle protection faults. MMU configurations must enable it.
noMMU configurations may disable it if used memory map never
generates protection faults or faults are always fatal.
If unsure, say Y.
which completely violated my expectations of the page fault handling.
End result: Guenter reports that the xtensa no-MMU builds all fail with
arch/xtensa/mm/fault.c: In function ‘do_page_fault’:
arch/xtensa/mm/fault.c:133:8: error: implicit declaration of function ‘lock_mm_and_find_vma’
because I never exposed the new lock_mm_and_find_vma() function for the
no-MMU case.
Doing so is simple enough, and fixes the problem.
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes:
a050ba1e7422 ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tom Rix [Fri, 30 Jun 2023 23:19:47 +0000 (16:19 -0700)]
sysctl: set variable sysctl_mount_point storage-class-specifier to static
smatch reports
fs/proc/proc_sysctl.c:32:18: warning: symbol
'sysctl_mount_point' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Nishanth Menon [Wed, 21 Jun 2023 01:00:22 +0000 (20:00 -0500)]
mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0
Sec proxy/message manager data buffer is 60 bytes with the last of the
registers indicating transmission completion. This however poses a bit
of a challenge.
The backing memory for sec_proxy / message manager is regular memory,
and all sec proxy does is to trigger a burst of all 60 bytes of data
over to the target thread backing ring accelerator. It doesn't do a
memory scrub when it moves data out in the burst. When we transmit
multiple messages, remnants of previous message is also transmitted
which results in some random data being set in TISCI fields of
messages that have been expanded forward.
The entire concept of backward compatibility hinges on the fact that
the unused message fields remain 0x0 allowing for 0x0 value to be
specially considered when backward compatibility of message extension
is done.
So, instead of just writing the completion register, we continue
to fill the message buffer up with 0x0 (note: for partial message
involving completion, we already do this).
This allows us to scale and introduce ABI changes back also work with
other boot stages that may have left data in the internal memory.
While at this, be consistent and explicit with the data_reg pointer
increment.
Fixes:
aace66b170ce ("mailbox: Introduce TI message manager driver")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Stefan Kristiansson [Mon, 29 May 2023 13:50:45 +0000 (16:50 +0300)]
mailbox: tegra: add support for Tegra264
Tegra264 has a slightly different doorbell register layout than
previous chips.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Peter De Schrijver [Mon, 29 May 2023 13:50:43 +0000 (16:50 +0300)]
dt-bindings: mailbox: tegra: Document Tegra264 HSP
Add the compatible string for the HSP block found on the Tegra264 SoC.
The HSP block in Tegra264 is not register compatible with the one in
Tegra194 or Tegra234 hence there is no fallback compatibility string.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Stefan Wahren [Sat, 17 Jun 2023 13:36:19 +0000 (15:36 +0200)]
dt-bindings: mailbox: convert bcm2835-mbox bindings to YAML
Convert the DT binding document for bcm2835-mbox from .txt to YAML.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Manikanta Mylavarapu [Sun, 21 May 2023 22:28:41 +0000 (03:58 +0530)]
dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible
Add compatible for the Qualcomm IPQ5018 APCS block.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Linus Torvalds [Fri, 30 Jun 2023 22:22:09 +0000 (15:22 -0700)]
Merge tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Adjust log levels for common messages (Oleksandr Natalenko, Alex
Williamson)
- Support for dynamic MSI-X allocation (Reinette Chatre)
- Enable and report PCIe AtomicOp Completer capabilities (Alex
Williamson)
- Cleanup Kconfigs for vfio bus drivers (Alex Williamson)
- Add support for CDX bus based devices (Nipun Gupta)
- Fix race with concurrent mdev initialization (Eric Farman)
* tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio:
vfio/mdev: Move the compat_class initialization to module init
vfio/cdx: add support for CDX bus
vfio/fsl: Create Kconfig sub-menu
vfio/platform: Cleanup Kconfig
vfio/pci: Cleanup Kconfig
vfio/pci-core: Add capability for AtomicOp completer support
vfio/pci: Also demote hiding standard cap messages
vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X
vfio/pci: Support dynamic MSI-X
vfio/pci: Probe and store ability to support dynamic MSI-X
vfio/pci: Use bitfield for struct vfio_pci_core_device flags
vfio/pci: Update stale comment
vfio/pci: Remove interrupt context counter
vfio/pci: Use xarray for interrupt context storage
vfio/pci: Move to single error path
vfio/pci: Prepare for dynamic interrupt context storage
vfio/pci: Remove negative check on unsigned vector
vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable
vfio/pci: demote hiding ecap messages to debug level
Linus Torvalds [Fri, 30 Jun 2023 22:06:45 +0000 (15:06 -0700)]
Merge tag 'pci-v6.5-changes' of git://git./linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Export pcie_retrain_link() for use outside ASPM
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up
- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates
Resource management:
- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly
Hotplug:
- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely
- Reassign bridge resources if necessary for ACPI hotplug
Driver binding:
- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int
Power management:
- Reduce wait time for secondary bus to be ready to speed up resume
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold
- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume
Virtualization:
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted
- Add function 1 DMA alias quirk for Marvell 88SE9235
Error handling:
- Unexport pci_save_aer_state() since it's only used in drivers/pci/
- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices
ASPM:
- Disable ASPM on MFD function removal to avoid use-after-free
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify
- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason
Endpoint framework:
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"
- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues
- Fix many EPC test issues
- Return pci_epf_type_add_cfs() error if EPF has no driver
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters
- Pass EPF device ID to driver probe functions
- Return -EALREADY if EPC has already been started/stopped
- Add linkdown notifier support and use it in qcom-ep
- Add Bus Master Enable event support and use it in qcom-ep
- Add Qualcomm Modem Host Interface (MHI) endpoint driver
- Add Layerscape PME interrupt handling to manage link-up
notification
Cadence PCIe controller driver:
- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode
Faraday FTPC100 PCI controller driver:
- Release clock resources on error paths
Freescale i.MX6 PCIe controller driver:
- Save and restore Root Port MSI control to work around hardware defect
Intel VMD host bridge driver:
- Reset VMD config register between soft reboots
- Capture pci_reset_bus() return value instead of printing junk when
it fails
Qualcomm PCIe controller driver:
- Add SDX65 endpoint compatible string to DT binding
- Disable register write access after init for IP v2.3.3, v2.9.0
- Use DWC helpers for enabling/disabling writes to DBI registers
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0
- Reuse v2.3.2 post-init sequence for v2.4.0
Renesas R-Car PCIe controller driver:
- Remove unused static pcie_base and pcie_dev
Rockchip PCIe controller driver:
- Remove writes to unused registers
- Write endpoint Device ID using correct register
- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages
- Poll waiting for PHY PLLs to lock
- Update RK3399 example DT binding to be valid
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message
- Use multiple windows to avoid address translation conflicts
- Use u32 (not u16) when accessing 32-bit registers
- Hide MSI-X Capability, since RK3399 can't generate MSI-X
- Set endpoint controller required alignment to 256
Synopsys DesignWare PCIe controller driver:
- Wait for link to come up only if we've initiated link training
Miscellaneous:
- Add pci_clear_master() stub for non-CONFIG_PCI"
* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...
Linus Torvalds [Fri, 30 Jun 2023 21:57:19 +0000 (14:57 -0700)]
Merge tag 'pinctrl-v6.5-1' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time
New drivers:
- Tegra234 support
- Qualcomm IPQ5018 support
- Intel Meteor Lake-S support
- Qualcomm SDX75 subdriver
- Qualcomm SPMI-based PM8953 support
Improvements:
- Fix up support for GPIO3 on the AXP209
- Push-pull drive configuration support for the AT91 PIO4
- Fix misc non-urgent bugs in the AMD driver
- Misc non-urgent improved error handling
- Misc janitorial and minor improvements"
* tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: cherryview: Drop goto label
pinctrl: baytrail: invert if condition
pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure
pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook
pinctrl: tegra: avoid duplicate field initializers
dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function
pinctrl: mlxbf3: remove broken Kconfig 'select'
pinctrl: spear: Remove unused of_gpio.h inclusion
pinctrl: lantiq: Remove unused of_gpio.h inclusion
pinctrl: at91-pio4: check return value of devm_kasprintf()
pinctrl: microchip-sgpio: check return value of devm_kasprintf()
pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
pinctrl: intel: refine ->irq_set_type() hook
pinctrl: intel: refine ->set_mux() hook
pinctrl: baytrail: Use str_hi_lo() helper
lib/string_choices: Add str_high_low() helper
lib/string_helpers: Split out string_choices.h
lib/string_helpers: Add missing header files to MAINTAINERS database
pinctrl: npcm7xx: Add missing check for ioremap
pinctrl:sunplus: Add check for kmalloc
...
Linus Torvalds [Fri, 30 Jun 2023 21:50:00 +0000 (14:50 -0700)]
Merge tag 'platform-drivers-x86-v6.5-1' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"AMD PMC and PMF drivers:
- Various bugfixes
- Improved debugging support
Intel PMC:
- Refactor to support hw with multiple PMCs
- Various other improvements / new hw support
Intel Speed Select Technology (ISST):
- TPMI Uncore Frequency + Cluster Level Power Controls
- Various bugfixes
- tools/intel-speed-select: Misc improvements
Dell-DDV: Add documentation
INT3472 ACPI camera sensor glue code:
- Evaluate device's _DSM method to control imaging clock
- Drop the need to have a table with per sensor-model info
Lenovo Yogabook:
- Refactor / rework to also support Android models
Think-LMI:
- Multiple improvements and fixes
WMI:
- Add proper API documentation for the WMI bus
x86-android-tablets:
- Misc new hw support
Miscellaneous other cleanups / fixes"
* tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (91 commits)
platform/x86:intel/pmc: Add Meteor Lake IOE-M PMC related maps
platform/x86:intel/pmc: Add Meteor Lake IOE-P PMC related maps
platform/x86:intel/pmc: Use SSRAM to discover pwrm base address of primary PMC
platform/x86:intel/pmc: Discover PMC devices
platform/x86:intel/pmc: Enable debugfs multiple PMC support
platform/x86:intel/pmc: Add support to handle multiple PMCs
platform/x86:intel/pmc: Combine core_init() and core_configure()
platform/x86:intel/pmc: Update maps for Meteor Lake P/M platforms
platform/x86/intel: tpmi: Remove hardcoded unit and offset
platform/x86: int3472: discrete: Log a warning if the pin-numbers don't match
platform/x86: int3472: discrete: Use FIELD_GET() on the GPIO _DSM return value
platform/x86: int3472: discrete: Add alternative "AVDD" regulator supply name
platform/x86: int3472: discrete: Add support for 1 GPIO regulator shared between 2 sensors
platform/x86: int3472: discrete: Remove sensor_config-s
platform/x86: int3472: discrete: Drop GPIO remapping support
platform/x86: apple-gmux: don't use be32_to_cpu and cpu_to_be32
platform/x86/dell/dell-rbtn: Fix resources leaking on error path
platform/x86: ISST: Fix usage counter
platform/x86: ISST: Reset default callback on unregister
platform/x86: int3472: Switch back to use struct i2c_driver's .probe()
...
Linus Torvalds [Fri, 30 Jun 2023 19:16:00 +0000 (12:16 -0700)]
Merge tag 'for-6.5/dm-changes' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Update DM crypt to allocate compound pages if possible
- Fix DM crypt target's crypt_ctr_cipher_new return value on invalid
AEAD cipher
- Fix DM flakey testing target's write bio corruption feature to
corrupt the data of a cloned bio instead of the original
- Add random_read_corrupt and random_write_corrupt features to DM
flakey target
- Fix ABBA deadlock in DM thin metadata by resetting associated bufio
client rather than destroying and recreating it
- A couple other small DM thinp cleanups
- Update DM core to support disabling block core IO stats accounting
and optimize away code that isn't needed if stats are disabled
- Other small DM core cleanups
- Improve DM integrity target to not require so much memory on 32 bit
systems. Also only allocate the recalculate buffer as needed (and
increasingly reduce its size on allocation failure)
- Update DM integrity to use %*ph for printing hexdump of a small
buffer. Also update DM integrity documentation
- Various DM core ioctl interface hardening. Now more careful about
alignment of structures and processing of input passed to the kernel
from userspace.
Also disallow the creation of DM devices named "control", "." or ".."
- Eliminate GFP_NOIO workarounds for __vmalloc and kvmalloc in DM
core's ioctl and bufio code
* tag 'for-6.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits)
dm: get rid of GFP_NOIO workarounds for __vmalloc and kvmalloc
dm integrity: scale down the recalculate buffer if memory allocation fails
dm integrity: only allocate recalculate buffer when needed
dm integrity: reduce vmalloc space footprint on 32-bit architectures
dm ioctl: Refuse to create device named "." or ".."
dm ioctl: Refuse to create device named "control"
dm ioctl: Avoid double-fetch of version
dm ioctl: structs and parameter strings must not overlap
dm ioctl: Avoid pointer arithmetic overflow
dm ioctl: Check dm_target_spec is sufficiently aligned
Documentation: dm-integrity: Document an example of how the tunables relate.
Documentation: dm-integrity: Document default values.
Documentation: dm-integrity: Document the meaning of "buffer".
Documentation: dm-integrity: Fix minor grammatical error.
dm integrity: Use %*ph for printing hexdump of a small buffer
dm thin: disable discards for thin-pool if no_discard_passdown
dm: remove stale/redundant dm_internal_{suspend,resume} prototypes in dm.h
dm: skip dm-stats work in alloc_io() unless needed
dm: avoid needless dm_io access if all IO accounting is disabled
dm: support turning off block-core's io stats accounting
...
Linus Torvalds [Fri, 30 Jun 2023 18:57:07 +0000 (11:57 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
Linus Torvalds [Fri, 30 Jun 2023 18:48:16 +0000 (11:48 -0700)]
Merge tag 'ata-6.5-rc1' of git://git./linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
- Add support for the .remove_new callback to the ata_platform code to
simplify device removal interface (Uwe)
- Code simplification in ata_dev_revalidate() (Yahu)
- Fix code indentation and coding style in the pata_parport protocol
modules to avoid warnings from static code analyzers (me)
- Clarify ata_eh_qc_retry() behavior with better comments (Niklas)
- Simplify and improve ata_change_queue_depth() behavior to have a
consistent behavior between libsas managed devices and libata managed
devices (e.g. AHCI connected devices) (me)
- Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled()
and ata_ncq_supported() helpers instead of open coding flags tests
(me)
- Cleanup ahci_reset_controller() code (me)
- Change the pata_octeon_cf and sata_svw drivers to use
of_property_read_reg() to simplify the code (Rob, me)
- Remove unnecessary include files from ahci_octeon driver (me)
- Modify the DesignWare ahci dt bindings to add support for the
Rockchip RK3588 AHCI (Sebastian)
* tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits)
dt-bindings: phy: rockchip: rk3588 has two reset lines
dt-bindings: ata: dwc-ahci: add Rockchip RK3588
dt-bindings: ata: dwc-ahci: add PHY clocks
ata: ahci_octeon: Remove unnecessary include
ata: pata_octeon_cf: Add missing header include
ata: ahci: Cleanup ahci_reset_controller()
ata: Use of_property_read_reg() to parse "reg"
ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config()
ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down()
ata: libata-sata: Improve ata_change_queue_depth()
ata: libata-sata: Simplify ata_change_queue_depth()
ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site
ata: pata_parport: Fix on26 module code indentation and style
ata: pata_parport: Fix on20 module code indentation and style
ata: pata_parport: Fix ktti module code indentation and style
ata: pata_parport: Fix kbic module code indentation and style
ata: pata_parport: Fix friq module code indentation and style
ata: pata_parport: Fix fit3 module code indentation and style
ata: pata_parport: Fix fit2 module code indentation and style
ata: pata_parport: Fix epia module code indentation and style
...
Linus Torvalds [Fri, 30 Jun 2023 18:35:41 +0000 (11:35 -0700)]
Merge tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git./linux/kernel/git/perf/perf-tools-next
Pull perf tools updates from Namhyung Kim:
"Internal cleanup:
- Refactor PMU data management to handle hybrid systems in a generic
way.
Do more work in the lexer so that legacy event types parse more
easily. A side-effect of this is that if a PMU is specified,
scanning sysfs is avoided improving start-up time.
- Fix hybrid metrics, for example, the TopdownL1 works for both
performance and efficiency cores on Intel machines. To support
this, sort and regroup events after parsing.
- Add reference count checking for the 'thread' data structure.
- Lots of fixes for memory leaks in various places thanks to the ASAN
and Ian's refcount checker.
- Reduce the binary size by replacing static variables with local or
dynamically allocated memory.
- Introduce shared_mutex for annotate data to reduce memory
footprint.
- Make filesystem access library functions more thread safe.
Test:
- Organize cpu_map tests into a single suite.
- Add metric value validation test to check if the values are within
correct value ranges.
- Add perf stat stdio output test to check if event and metric names
match.
- Add perf data converter JSON output test.
- Fix a lot of issues reported by shellcheck(1). This is a
preparation to enable shellcheck by default.
- Make the large x86 new instructions test optional at build time
using EXTRA_TESTS=1.
- Add a test for libpfm4 events.
perf script:
- Add 'dsoff' outpuf field to display offset from the DSO.
$ perf script -F comm,pid,event,ip,dsoff
ls
2695501 cycles:
152cc73ef4b5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so+0x1c4b5)
ls
2695501 cycles:
ffffffff99045b3e ([kernel.kallsyms])
ls
2695501 cycles:
ffffffff9968e107 ([kernel.kallsyms])
ls
2695501 cycles:
ffffffffc1f54afb ([kernel.kallsyms])
ls
2695501 cycles:
ffffffff9968382f ([kernel.kallsyms])
ls
2695501 cycles:
ffffffff99e00094 ([kernel.kallsyms])
ls
2695501 cycles:
152cc718a8d0 (/usr/lib/x86_64-linux-gnu/libselinux.so.1+0x68d0)
ls
2695501 cycles:
ffffffff992a6db0 ([kernel.kallsyms])
- Adjust width for large PID/TID values.
perf report:
- Robustify reading addr2line output for srcline by checking sentinel
output before the actual data and by using timeout of 1 second.
- Allow config terms (like 'name=ABC') with breakpoint events.
$ perf record -e mem:0x55feb98dd169:x/name=breakpoint/ -p 19646 -- sleep 1
perf annotate:
- Handle x86 instruction suffix like 'l' in 'movl' generally.
- Parse instruction operands properly even with a whitespace. This is
needed for llvm-objdump output.
- Support RISC-V binutils lookup using the triplet prefixes.
- Add '<' and '>' key to navigate to prev/next symbols in TUI.
- Fix instruction association and parsing for LoongArch.
perf stat:
- Add --per-cache aggregation option, optionally specify a cache
level like `--per-cache=L2`.
$ sudo perf stat --per-cache -a -e ls_dmnd_fills_from_sys.ext_cache_remote --\
taskset -c 0-15,64-79,128-143,192-207\
perf bench sched messaging -p -t -l 100000 -g 8
# Running 'sched/messaging' benchmark:
# 20 sender and receiver threads per group
# 8 groups == 320 threads run
Total time: 7.648 [sec]
Performance counter stats for 'system wide':
S0-D0-L3-ID0 16 17,145,912 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID8 16 14,977,628 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID16 16 262,539 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID24 16 3,140 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID32 16 27,403 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID40 16 17,026 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID48 16 7,292 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID56 16 2,464 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID64 16 22,489,306 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID72 16 21,455,257 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID80 16 11,619 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID88 16 30,978 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID96 16 37,628 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID104 16 13,594 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID112 16 10,164 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID120 16 11,259 ls_dmnd_fills_from_sys.ext_cache_remote
7.
779171484 seconds time elapsed
- Change default (no event/metric) formatting for default metrics so
that events are hidden and the metric and group appear.
Performance counter stats for 'ls /':
1.85 msec task-clock # 0.594 CPUs utilized
0 context-switches # 0.000 /sec
0 cpu-migrations # 0.000 /sec
97 page-faults # 52.517 K/sec
2,187,173 cycles # 1.184 GHz
2,474,459 instructions # 1.13 insn per cycle
531,584 branches # 287.805 M/sec
13,626 branch-misses # 2.56% of all branches
TopdownL1 # 23.5 % tma_backend_bound
# 11.5 % tma_bad_speculation
# 39.1 % tma_frontend_bound
# 25.9 % tma_retiring
- Allow --cputype option to have any PMU name (not just hybrid).
- Fix output value not to added when it runs multiple times with -r
option.
perf list:
- Show metricgroup description from JSON file called
metricgroups.json.
- Allow 'pfm' argument to list only libpfm4 events and check each
event is supported before showing it.
JSON vendor events:
- Avoid event grouping using "NO_GROUP_EVENTS" constraints. The
topdown events are correctly grouped even if no group exists.
- Add "Default" metric group to print it in the default output. And
use "DefaultMetricgroupName" to indicate the real metric group
name.
- Add AmpereOne core PMU events.
Misc:
- Define man page date correctly.
- Track exception level properly on ARM CoreSight ETM.
- Allow anonymous struct, union or enum when retrieving type names
from DWARF.
- Fix incorrect filename when calling `perf inject --jit`.
- Handle PLT size correctly on LoongArch"
* tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (269 commits)
perf test: Skip metrics w/o event name in stat STD output linter
perf test: Reorder event name checks in stat STD output linter
perf pmu: Remove a hard coded cpu PMU assumption
perf pmus: Add notion of default PMU for JSON events
perf unwind: Fix map reference counts
perf test: Set PERF_EXEC_PATH for script execution
perf script: Initialize buffer for regs_map()
perf tests: Fix test_arm_callgraph_fp variable expansion
perf symbol: Add LoongArch case in get_plt_sizes()
perf test: Remove x permission from lib/stat_output.sh
perf test: Rerun failed metrics with longer workload
perf test: Add skip list for metrics known would fail
perf test: Add metric value validation test
perf jit: Fix incorrect file name in DWARF line table
perf annotate: Fix instruction association and parsing for LoongArch
perf annotation: Switch lock from a mutex to a sharded_mutex
perf sharded_mutex: Introduce sharded_mutex
tools: Fix incorrect calculation of object size by sizeof
perf subcmd: Fix missing check for return value of malloc() in add_cmdname()
perf parse-events: Remove unneeded semicolon
...
Linus Torvalds [Fri, 30 Jun 2023 17:44:53 +0000 (10:44 -0700)]
Merge tag 'probes-v6.5' of git://git./linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- fprobe: Pass return address to the fprobe entry/exit callbacks so
that the callbacks don't need to analyze pt_regs/stack to find the
function return address.
- kprobe events: cleanup usage of TPARG_FL_FENTRY and TPARG_FL_RETURN
flags so that those are not set at once.
- fprobe events:
- Add a new fprobe events for tracing arbitrary function entry and
exit as a trace event.
- Add a new tracepoint events for tracing raw tracepoint as a
trace event. This allows user to trace non user-exposed
tracepoints.
- Move eprobe's event parser code into probe event common file.
- Introduce BTF (BPF type format) support to kernel probe (kprobe,
fprobe and tracepoint probe) events so that user can specify
traced function arguments by name. This also applies the type of
argument when fetching the argument.
- Introduce '$arg*' wildcard support if BTF is available. This
expands the '$arg*' meta argument to all function argument
automatically.
- Check the return value types by BTF. If the function returns
'void', '$retval' is rejected.
- Add some selftest script for fprobe events, tracepoint events
and BTF support.
- Update documentation about the fprobe events.
- Some fixes for above features, document and selftests.
- selftests for ftrace (in addition to the new fprobe events):
- Add a test case for multiple consecutive probes in a function
which checks if ftrace based kprobe, optimized kprobe and normal
kprobe can be defined in the same target function.
- Add a test case for optimized probe, which checks whether kprobe
can be optimized or not.
* tag 'probes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix tracepoint event with $arg* to fetch correct argument
Documentation: Fix typo of reference file name
tracing/probes: Fix to return NULL and keep using current argc
selftests/ftrace: Add new test case which checks for optimized probes
selftests/ftrace: Add new test case which adds multiple consecutive probes in a function
Documentation: tracing/probes: Add fprobe event tracing document
selftests/ftrace: Add BTF arguments test cases
selftests/ftrace: Add tracepoint probe test case
tracing/probes: Add BTF retval type support
tracing/probes: Add $arg* meta argument for all function args
tracing/probes: Support function parameters if BTF is available
tracing/probes: Move event parameter fetching code to common parser
tracing/probes: Add tracepoint support on fprobe_events
selftests/ftrace: Add fprobe related testcases
tracing/probes: Add fprobe events for tracing function entry and exit.
tracing/probes: Avoid setting TPARG_FL_FENTRY and TPARG_FL_RETURN
fprobe: Pass return address to the handlers
Linus Torvalds [Fri, 30 Jun 2023 17:33:17 +0000 (10:33 -0700)]
Merge tag 'trace-v6.5' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add new feature to have function graph tracer record the return
value. Adds a new option: funcgraph-retval ; when set, will show the
return value of a function in the function graph tracer.
- Also add the option: funcgraph-retval-hex where if it is not set, and
the return value is an error code, then it will return the decimal of
the error code, otherwise it still reports the hex value.
- Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd
That when a application opens it, it becomes the task that the timer
lat tracer traces. The application can also read this file to find
out how it's being interrupted.
- Add the file /sys/kernel/tracing/available_filter_functions_addrs
that works just the same as available_filter_functions but also shows
the addresses of the functions like kallsyms, except that it gives
the address of where the fentry/mcount jump/nop is. This is used by
BPF to make it easier to attach BPF programs to ftrace hooks.
- Replace strlcpy with strscpy in the tracing boot code.
* tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix warnings when building htmldocs for function graph retval
riscv: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
tracing/boot: Replace strlcpy with strscpy
tracing/timerlat: Add user-space interface
tracing/osnoise: Skip running osnoise if all instances are off
tracing/osnoise: Switch from PF_NO_SETAFFINITY to migrate_disable
ftrace: Show all functions with addresses in available_filter_functions_addrs
selftests/ftrace: Add funcgraph-retval test case
LoongArch: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
x86/ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
tracing: Add documentation for funcgraph-retval and funcgraph-retval-hex
function_graph: Support recording and printing the return value of function
fgraph: Add declaration of "struct fgraph_ret_regs"
Linus Torvalds [Fri, 30 Jun 2023 16:37:26 +0000 (09:37 -0700)]
Merge tag 'riscv-for-linus-6.5-mw1' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for ACPI
- Various cleanups to the ISA string parsing, including making them
case-insensitive
- Support for the vector extension
- Support for independent irq/softirq stacks
- Our CPU DT binding now has "unevaluatedProperties: false"
* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
riscv: hibernate: remove WARN_ON in save_processor_state
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
dt-bindings: riscv: cpus: add a ref the common cpu schema
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
perf: RISC-V: Limit the number of counters returned from SBI
riscv: replace deprecated scall with ecall
riscv: uprobes: Restore thread.bad_cause
riscv: mm: try VMA lock-based page fault handling first
riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
...
Linus Torvalds [Fri, 30 Jun 2023 16:20:08 +0000 (09:20 -0700)]
Merge tag 'powerpc-6.5-1' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations
- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
use the -mprofile-kernel option (kernel specific ftrace ABI) for big
endian ELFv2 kernels
- Add initial Dynamic Execution Control Register (DEXCR) support, and
allow the ROP protection instructions to be used on Power 10
- Various other small features and fixes
Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.
* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
powerpc: remove checks for binutils older than 2.25
powerpc: Fail build if using recordmcount with binutils v2.37
powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
powerpc/iommu: Only build sPAPR access functions on pSeries
powerpc: powernv: Annotate data races in opal events
powerpc: Mark writes registering ipi to host cpu through kvm and polling
powerpc: Annotate accesses to ipi message flags
powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
powerpc: qspinlock: Mark accesses to qnode lock checks
powerpc/powernv/pci: Remove last IODA1 defines
powerpc/powernv/pci: Remove MVE code
powerpc/powernv/pci: Remove ioda1 support
powerpc: 52xx: Make immr_id DT match tables static
powerpc: mpc512x: Remove open coded "ranges" parsing
powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
powerpc: fsl: Use of_property_read_reg() to parse "reg"
powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
macintosh: Use of_property_read_reg() to parse "reg"
...
Kees Cook [Fri, 30 Jun 2023 07:46:17 +0000 (09:46 +0200)]
pid: Replace struct pid 1-element array with flex-array
For pid namespaces, struct pid uses a dynamically sized array member,
"numbers". This was implemented using the ancient 1-element fake
flexible array, which has been deprecated for decades.
Replace it with a C99 flexible array, refactor the array size
calculations to use struct_size(), and address elements via indexes.
Note that the static initializer (which defines a single element) works
as-is, and requires no special handling.
Without this, CONFIG_UBSAN_BOUNDS (and potentially
CONFIG_FORTIFY_SOURCE) will trigger bounds checks:
https://lore.kernel.org/lkml/
20230517-bushaltestelle-super-
e223978c1ba6@brauner
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Reported-by: syzbot+ac3b41786a2d0565b6d5@syzkaller.appspotmail.com
[brauner: dropped unrelated changes and remove 0 with NULL cast]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 30 Jun 2023 15:52:28 +0000 (08:52 -0700)]
Merge tag 'loongarch-6.5' of git://git./linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- preliminary ClangBuiltLinux enablement
- add support to clone a time namespace
- add vector extensions support
- add SMT (Simultaneous Multi-Threading) support
- support dbar with different hints
- introduce hardware page table walker
- add jump-label implementation
- add rethook and uprobes support
- some bug fixes and other small changes
* tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (28 commits)
LoongArch: Remove five DIE_* definitions in kdebug.h
LoongArch: Add uprobes support
LoongArch: Use larch_insn_gen_break() for kprobes
LoongArch: Add larch_insn_gen_break() to generate break insns
LoongArch: Check for AMO instructions in insns_not_supported()
LoongArch: Move three functions from kprobes.c to inst.c
LoongArch: Replace kretprobe with rethook
LoongArch: Add jump-label implementation
LoongArch: Select HAVE_DEBUG_KMEMLEAK to support kmemleak
LoongArch: Export some arch-specific pm interfaces
LoongArch: Introduce hardware page table walker
LoongArch: Support dbar with different hints
LoongArch: Add SMT (Simultaneous Multi-Threading) support
LoongArch: Add vector extensions support
LoongArch: Add support to clone a time namespace
Makefile: Add loongarch target flag for Clang compilation
LoongArch: Mark Clang LTO as working
LoongArch: Include KBUILD_CPPFLAGS in CHECKFLAGS invocation
LoongArch: vDSO: Use CLANG_FLAGS instead of filtering out '--target='
LoongArch: Tweak CFLAGS for Clang compatibility
...
Helge Deller [Sun, 25 Jun 2023 14:06:12 +0000 (16:06 +0200)]
parisc: Refresh defconfigs
Refresh defconfigs and enable some more graphic cards.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 14:21:38 +0000 (16:21 +0200)]
parisc: irq: Add irq-related function declarations
Move function declarations for do_cpu_irq_mask(), timer_interrupt() and
ipi_interrupt() to header file.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 11:31:48 +0000 (13:31 +0200)]
parisc: Move init function declarations into header file
Clean up the code to not have external function declarations
inside the C source files. Reduces warnings when compiled with W=1.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 11:12:58 +0000 (13:12 +0200)]
parisc: dino: Make dino_init() returning void
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 11:11:12 +0000 (13:11 +0200)]
parisc: lba_pci: Mark two variables __maybe_unused
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 11:08:00 +0000 (13:08 +0200)]
parisc: unaligned: Include header file to avoid missing prototype warnings
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:50:26 +0000 (12:50 +0200)]
parisc: signal: Mark do_notify_resume() and sys_rt_sigreturn() asmlinkage
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:44:33 +0000 (12:44 +0200)]
parisc: unwind: Mark start and stop variables __maybe_unused
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:42:36 +0000 (12:42 +0200)]
parisc: init: Drop unused variable end_paddr
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:39:03 +0000 (12:39 +0200)]
parisc: traps: Mark functions static
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:37:50 +0000 (12:37 +0200)]
parisc: processor: Fix kdoc for init_cpu_profiler()
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:36:09 +0000 (12:36 +0200)]
parisc: sys_parisc: parisc_personality() is called from asm code
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:34:25 +0000 (12:34 +0200)]
parisc: ccio-dma: Fix kdoc and compiler warnings
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:33:09 +0000 (12:33 +0200)]
parisc: pdc_stable: Fix kdoc and compiler warnings
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:31:56 +0000 (12:31 +0200)]
parisc: pci-dma: Make pcxl_alloc_range() static
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:31:14 +0000 (12:31 +0200)]
parisc: Mark image_size __maybe_unused in perf_write()
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:30:19 +0000 (12:30 +0200)]
parisc: module: Mark symindex __maybe_unused
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:28:40 +0000 (12:28 +0200)]
parisc: pdc_chassis: Fix kdoc warnings
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:26:53 +0000 (12:26 +0200)]
parisc: firmware: Fix kdoc warnings
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:24:37 +0000 (12:24 +0200)]
parisc: drivers: Fix kdoc warnings
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:18:45 +0000 (12:18 +0200)]
parisc: Fold 32-bit compat code into audit_classify_syscall()
No need to keep an extra 32-bit audit_classify_syscall() function.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 30 Jun 2023 10:15:06 +0000 (12:15 +0200)]
parisc: sba_iommu: Fix kdoc warnings
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Wed, 10 May 2023 20:17:27 +0000 (22:17 +0200)]
sticon/parisc: Fix STI console on 64-bit only machines
Fix the STI console to be able to execute either the 64-bit STI ROM code
or the 32-bit STI ROM code.
This is necessary on 64-bit only machines (e.g. C8000 workstation) which
otherwise won't show the STI text console with HP graphic cards like
Visualize-FX5/FX10/FXe.
Note that when calling 32-bit code from a 64-bit kernel one needs to
copy contents on the CPU stack from high memory down below the 4GB
limit.
Tested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sun, 14 May 2023 11:23:06 +0000 (13:23 +0200)]
sticon/parisc: Allow 64-bit STI calls in PDC firmware abstration
Some 64-bit machines require us to call the STI ROM in 64-bit mode, e.g.
with the VisFXe graphic card.
This patch allows drivers to use such 64-bit calling conventions.
Tested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 23 Jun 2023 06:07:47 +0000 (08:07 +0200)]
parisc: Default to 8 CPUs for 64-bit kernel
I've now seen a 6-way SMP rp4440 machine, so increase minimum
number of CPUs to 8 for 64-bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Mon, 19 Jun 2023 04:32:19 +0000 (06:32 +0200)]
parisc: Fix missing prototype warning for arch_report_meminfo()
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202306122223.HHER4zOo-lkp@intel.com/
Helge Deller [Fri, 26 May 2023 08:59:15 +0000 (10:59 +0200)]
parisc: Add cacheflush() syscall
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 26 May 2023 06:33:02 +0000 (08:33 +0200)]
parisc: Check if IRQs are disabled when calling arch_local_irq_restore()
A trivial check to check if IRQs are on although they should be off.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Fri, 26 May 2023 06:27:18 +0000 (08:27 +0200)]
parisc: Move TLB_PTLOCK option to Kconfig.debug
Move this debug option to the Kconfig.debug file.
Signed-off-by: Helge Deller <deller@gmx.de>
Thomas Gleixner [Thu, 29 Jun 2023 19:35:19 +0000 (21:35 +0200)]
x86/efi: Make efi_set_virtual_address_map IBT safe
Niklāvs reported a boot regression on an Alderlake machine and bisected it
to commit
9df9d2f0471b ("init: Invoke arch_cpu_finalize_init() earlier").
By moving the invocation of arch_cpu_finalize_init() further down he
identified that efi_enter_virtual_mode() is the function which causes the
boot hang.
The main difference of the earlier invocation is that the boot CPU is
already fully initialized and mitigations and alternatives are applied.
But the only really interesting change turned out to be IBT, which is now
enabled before efi_enter_virtual_mode(). "ibt=off" on the kernel command
line cured the problem.
Inspection of the involved calls in efi_enter_virtual_mode() unearthed that
efi_set_virtual_address_map() is the only place in the kernel which invokes
an EFI call without the IBT safe wrapper. This went obviously unnoticed so
far as IBT was enabled later.
Use arch_efi_call_virt() instead of efi_call() to cure that.
Fixes:
fe379fa4d199 ("x86/ibt: Disable IBT around firmware")
Fixes:
9df9d2f0471b ("init: Invoke arch_cpu_finalize_init() earlier")
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217602
Link: https://lore.kernel.org/r/87jzvm12q0.ffs@tglx
Linus Torvalds [Fri, 30 Jun 2023 06:34:29 +0000 (23:34 -0700)]
csky: fix up lock_mm_and_find_vma() conversion
As already mentioned in my merge message for the 'expand-stack' branch,
we have something like 24 different versions of the page fault path for
all our different architectures, all just _slightly_ different due to
various historical reasons (usually related to exactly when they
branched off the original i386 version, and the details of the other
architectures they had in their history).
And a few of them had some silly mistake in the conversion.
Most of the architectures call the faulting address 'address' in the
fault path. But not all. Some just call it 'addr'. And if you end up
doing a bit too much copy-and-paste, you end up with the wrong version
in the places that do it differently.
In this case it was csky.
Fixes:
a050ba1e7422 ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 30 Jun 2023 06:21:20 +0000 (23:21 -0700)]
Merge tag 'memblock-v6.5-rc1' of git://git./linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- add test for memblock_alloc_node()
- minor coding style fixes
- add flags and nid info in memblock debugfs
* tag 'memblock-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Update nid info in memblock debugfs
memblock: Add flags and nid info in memblock debugfs
Fix some coding style errors in memblock.c
Add tests for memblock_alloc_node()
Linus Torvalds [Fri, 30 Jun 2023 06:04:57 +0000 (23:04 -0700)]
parisc: fix expand_stack() conversion
In commit
8d7071af8907 ("mm: always expand the stack with the mmap write
lock held") I tried to deal with the remaining odd page fault handling
cases. The oddest one is ia64, which has stacks that grow both up and
down. And because ia64 was _so_ odd, I asked people to verify the end
result.
But a close second oddity is parisc, which is the only one that has a
main stack growing up (our "CONFIG_STACK_GROWSUP" config option). But
it looked obvious enough that I didn't worry about it.
I should have worried a bit more. Not because it was particularly
complex, but because I just used the wrong variable name.
The previous vma isn't called "prev", it's called "prev_vma". Blush.
Fixes:
8d7071af8907 ("mm: always expand the stack with the mmap write lock held")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 30 Jun 2023 04:12:20 +0000 (21:12 -0700)]
Merge tag 'dma-mapping-6.5-2023-06-28' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- swiotlb cleanups (Petr Tesarik)
- use kvmalloc_array (gaoxu)
- a small step towards removing is_swiotlb_active (Christoph Hellwig)
- fix a Kconfig typo Sui Jingfeng)
* tag 'dma-mapping-6.5-2023-06-28' of git://git.infradead.org/users/hch/dma-mapping:
drm/nouveau: stop using is_swiotlb_active
swiotlb: use the atomic counter of total used slabs if available
swiotlb: remove unused field "used" from struct io_tlb_mem
dma-remap: use kvmalloc_array/kvfree for larger dma memory remap
dma-mapping: fix a Kconfig typo
Linus Torvalds [Fri, 30 Jun 2023 04:01:17 +0000 (21:01 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This cycle saw a focus on rxe and bnxt_re drivers:
- Code cleanups for irdma, rxe, rtrs, hns, vmw_pvrdma
- rxe uses workqueues instead of tasklets
- rxe has better compliance around access checks for MRs and rereg_mr
- mana supportst he 'v2' FW interface for RX coalescing
- hfi1 bug fix for stale cache entries in its MR cache
- mlx5 buf fix to handle FW failures when destroying QPs
- erdma HW has a new doorbell allocation mechanism for uverbs that is
secure
- Lots of small cleanups and rework in bnxt_re:
- Use the common mmap functions
- Support disassociation
- Improve FW command flow
- support for 'low latency push'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (71 commits)
RDMA/bnxt_re: Fix an IS_ERR() vs NULL check
RDMA/bnxt_re: Fix spelling mistake "priviledged" -> "privileged"
RDMA/bnxt_re: Remove duplicated include in bnxt_re/main.c
RDMA/bnxt_re: Refactor code around bnxt_qplib_map_rc()
RDMA/bnxt_re: Remove incorrect return check from slow path
RDMA/bnxt_re: Enable low latency push
RDMA/bnxt_re: Reorg the bar mapping
RDMA/bnxt_re: Move the interface version to chip context structure
RDMA/bnxt_re: Query function capabilities from firmware
RDMA/bnxt_re: Optimize the bnxt_re_init_hwrm_hdr usage
RDMA/bnxt_re: Add disassociate ucontext support
RDMA/bnxt_re: Use the common mmap helper functions
RDMA/bnxt_re: Initialize opcode while sending message
RDMA/cma: Remove NULL check before dev_{put, hold}
RDMA/rxe: Simplify cq->notify code
RDMA/rxe: Fixes mr access supported list
RDMA/bnxt_re: optimize the parameters passed to helper functions
RDMA/bnxt_re: remove redundant cmdq_bitmap
RDMA/bnxt_re: use firmware provided max request timeout
RDMA/bnxt_re: cancel all control path command waiters upon error
...
Linus Torvalds [Fri, 30 Jun 2023 03:57:27 +0000 (20:57 -0700)]
Merge tag 'for-linus-iommufd' of git://git./linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Just two syzkaller fixes, both for the same basic issue: using the
area pointer during an access forced unmap while the locks protecting
it were let go"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Call iopt_area_contig_done() under the lock
iommufd: Do not access the area pointer after unlocking
Linus Torvalds [Fri, 30 Jun 2023 03:51:03 +0000 (20:51 -0700)]
Merge tag 'iommu-updates-v6.5' of git://git./linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- iova_magazine_alloc() optimization
- Make flush-queue an IOMMU driver capability
- Consolidate the error handling around device attachment
AMD IOMMU changes:
- AVIC Interrupt Remapping Improvements
- Some minor fixes and cleanups
Intel VT-d changes from Lu Baolu:
- Small and misc cleanups
ARM-SMMU changes from Will Deacon:
- Device-tree binding updates:
- Add missing clocks for SC8280XP and SA8775 Adreno SMMUs
- Add two new Qualcomm SMMUs in SDX75 and SM6375
- Workarounds for Arm MMU-700 errata:
-
1076982: Avoid use of SEV-based cmdq wakeup
-
2812531: Terminate command batches with a CMD_SYNC
- Enforce single-stage translation to avoid nesting-related errata
- Set the correct level hint for range TLB invalidation on teardown
.. and some other minor fixes and cleanups (including Freescale PAMU
and virtio-iommu changes)"
* tag 'iommu-updates-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (50 commits)
iommu/vt-d: Remove commented-out code
iommu/vt-d: Remove two WARN_ON in domain_context_mapping_one()
iommu/vt-d: Handle the failure case of dmar_reenable_qi()
iommu/vt-d: Remove unnecessary (void*) conversions
iommu/amd: Remove extern from function prototypes
iommu/amd: Use BIT/BIT_ULL macro to define bit fields
iommu/amd: Fix DTE_IRQ_PHYS_ADDR_MASK macro
iommu/amd: Fix compile error for unused function
iommu/amd: Improving Interrupt Remapping Table Invalidation
iommu/amd: Do not Invalidate IRT when IRTE caching is disabled
iommu/amd: Introduce Disable IRTE Caching Support
iommu/amd: Remove the unused struct amd_ir_data.ref
iommu/amd: Switch amd_iommu_update_ga() to use modify_irte_ga()
iommu/arm-smmu-v3: Set TTL invalidation hint better
iommu/arm-smmu-v3: Document nesting-related errata
iommu/arm-smmu-v3: Add explicit feature for nesting
iommu/arm-smmu-v3: Document MMU-700 erratum
2812531
iommu/arm-smmu-v3: Work around MMU-600 erratum
1076982
dt-bindings: arm-smmu: Add SDX75 SMMU compatible
dt-bindings: arm-smmu: Add SM6375 GPU SMMU
...
Linus Torvalds [Fri, 30 Jun 2023 03:41:24 +0000 (20:41 -0700)]
sparc32: fix lock_mm_and_find_vma() conversion
The sparc32 conversion to lock_mm_and_find_vma() in commit
a050ba1e7422
("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
missed the fact that we didn't actually have a 'regs' pointer available
in the 'force_user_fault()' case.
It's there in the regular page fault path ("do_sparc_fault()"), but not
the window underflow/overflow paths.
Which is all fine - we can just pass in a NULL pointer. The register
state is only used to avoid deadlock with kernel faults, which is not
the case for any of these register window faults.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
a050ba1e7422 ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 30 Jun 2023 00:44:56 +0000 (17:44 -0700)]
Merge tag 'sysctl-6.5-rc1-fixes' of git://git./linux/kernel/git/mcgrof/linux
Pull sysctl fix from Luis Chamberlain:
"A missed minor fix which Matthieu Baerts noted I had not picked up"
* tag 'sysctl-6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: fix unused proc_cap_handler() function warning
Linus Torvalds [Fri, 30 Jun 2023 00:38:54 +0000 (17:38 -0700)]
Merge tag 'unmap-fix-
20230629' of git://git.infradead.org/users/dwmw2/linux
Pull mm fix from David Woodhouse:
"Fix error return from do_vmi_align_munmap()"
* tag 'unmap-fix-
20230629' of git://git.infradead.org/users/dwmw2/linux:
mm/mmap: Fix error return in do_vmi_align_munmap()
Linus Torvalds [Fri, 30 Jun 2023 00:36:00 +0000 (17:36 -0700)]
Merge tag 'trace-v6.4-rc7-v3' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix user event write on buffer disabled.
The user events write currently returns the size of what was supposed
to be written when tracing is disabled and nothing was written.
Instead, behave like trace_marker and return -EBADF, as that is what
is returned if a file is opened for read only, and a write is
performed on it. Writing to the buffer that is disabled is like trying
to write to a file opened for read only, as the buffer still can be
read, but just not written to.
This also includes test cases for this use case"
* tag 'trace-v6.4-rc7-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/user_events: Add test cases when event is disabled
selftests/user_events: Enable the event before write_fault test in ftrace self-test
tracing/user_events: Fix incorrect return value for writing operation when events are disabled
Linus Torvalds [Fri, 30 Jun 2023 00:32:59 +0000 (17:32 -0700)]
Merge tag 'acpi-6.5-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix suspend-to-idle breakage on multiple systems introduced by one of
the recent commits that may cause the affected systems to overheat
while suspended"
* tag 'acpi-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Fix acpi_ec_dispatch_gpe()
Ingo Molnar [Wed, 28 Jun 2023 09:16:03 +0000 (11:16 +0200)]
objtool: Remove btrfs_assertfail() from the noreturn exceptions list
The objtool merge in commit
6f612579be9d ("Merge tag 'objtool-core ...")
generated a semantic conflict that was not resolved.
The btrfs_assertfail() entry was removed from the noreturn list in
commit
b831306b3b7d ("btrfs: print assertion failure report and stack
trace from the same line") because btrfs_assertfail() was changed from a
noreturn function into a macro.
The noreturn list was then moved from check.c to noreturns.h in commit
6245ce4ab670 ("objtool: Move noreturn function list to separate file"),
and should be removed from that post-merge as well.
Do it explicitly.
Cc: David Sterba <dsterba@suse.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 29 Jun 2023 23:34:12 +0000 (16:34 -0700)]
Merge tag 'slab-for-6.5' of git://git./linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLAB deprecation:
Following the discussion at LSF/MM 2023 [1] and no objections, the
SLAB allocator is deprecated by renaming the config option (to make
its users notice) to CONFIG_SLAB_DEPRECATED with updated help text.
SLUB should be used instead. Existing defconfigs with CONFIG_SLAB are
also updated.
- SLAB_NO_MERGE kmem_cache flag (Jesper Dangaard Brouer):
There are (very limited) cases where kmem_cache merging is
undesirable, and existing ways to prevent it are hacky. Introduce a
new flag to do that cleanly and convert the existing hacky users.
Btrfs plans to use this for debug kernel builds (that use case is
always fine), networking for performance reasons (that should be very
rare).
- Replace the usage of weak PRNGs (David Keisar Schmidt):
In addition to using stronger RNGs for the security related features,
the code is a bit cleaner.
- Misc code cleanups (SeongJae Parki, Xiongwei Song, Zhen Lei, and
zhaoxinchao)
Link: https://lwn.net/Articles/932201/
* tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab_common: use SLAB_NO_MERGE instead of negative refcount
mm/slab: break up RCU readers on SLAB_TYPESAFE_BY_RCU example code
mm/slab: add a missing semicolon on SLAB_TYPESAFE_BY_RCU example code
mm/slab_common: reduce an if statement in create_cache()
mm/slab: introduce kmem_cache flag SLAB_NO_MERGE
mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
mm/slab: remove HAVE_HARDENED_USERCOPY_ALLOCATOR
mm/slab_common: Replace invocation of weak PRNG
mm/slab: Replace invocation of weak PRNG
slub: Don't read nr_slabs and total_objects directly
slub: Remove slabs_node() function
slub: Remove CONFIG_SMP defined check
slub: Put objects_show() into CONFIG_SLUB_DEBUG enabled block
slub: Correct the error code when slab_kset is NULL
mm/slab: correct return values in comment for _kmem_cache_create()
Yang Li [Thu, 29 Jun 2023 02:11:18 +0000 (10:11 +0800)]
cxl: Fix one kernel-doc comment
Fix a merge error that updated the argument to cxl_mem_get_fw_info() but
not the kernel-doc.
drivers/cxl/core/memdev.c:678: warning: Function parameter or member
'mds' not described in 'cxl_mem_get_fw_info'
drivers/cxl/core/memdev.c:678: warning: Excess function parameter
'cxlds' description in 'cxl_mem_get_fw_info'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230629021118.102744-1-yang.lee@linux.alibaba.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Linus Torvalds [Thu, 29 Jun 2023 22:28:33 +0000 (15:28 -0700)]
Merge tag 'soc-arm-6.5' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"These are mostly minor cleanups and bugfixes that address harmless
problems.
The largest branch is a conversion of the omap platform to use GPIO
descriptors throughout the tree, for any devices that are not fully
converted to devicetree.
The Samsung Exynos platform gains back support for the Exynos4212 chip
that was previously unused and removed but is now used for the Samsung
Galaxy Tab3"
* tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
ARM: omap2: Fix copy/paste bug
MAINTAINERS: Replace my email address
Input: ads7846 - fix pointer cast warning
Input: ads7846 - Fix usage of match data
ARM: omap2: Fix checkpatch issues
arm: omap1: replace printk() with pr_err macro
ARM: omap: Fix checkpatch issues
ARM: s3c: Switch i2c drivers back to use .probe()
ARM: versatile: mark mmc_status() static
ARM: spear: include "pl080.h" for pl080_get_signal() prototype
ARM: sa1100: address missing prototype warnings
ARM: pxa: fix missing-prototypes warnings
ARM: orion5x: fix d2net gpio initialization
ARM: omap2: fix missing tick_broadcast() prototype
ARM: omap1: add missing include
ARM: lpc32xx: add missing include
ARM: imx: add missing include
ARM: highbank: add missing include
ARM: ep93xx: fix missing-prototype warnings
ARM: davinci: fix davinci_cpufreq_init() declaration
...