OSDN Git Service
Chris Wilson [Mon, 27 Mar 2017 13:00:07 +0000 (14:00 +0100)]
drm/i915/execlists: Wrap tail pointer after reset tweaking
If the request->wa_tail is 0 (because it landed exactly on the end of
the ringbuffer), when we reconstruct request->tail following a reset we
fill in an illegal value (-8 or 0x001ffff8). As a result, RING_HEAD is
never able to catch up with RING_TAIL and the GPU spins endlessly. If
the ring contains a couple of breadcrumbs, even our hangcheck is unable
to catch the busy-looping as the ACTHD and seqno continually advance.
v2: Move the wrap into a common intel_ring_wrap().
Fixes:
a3aabe86a340 ("drm/i915/execlists: Reinitialise context image after GPU hang")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170327130009.4678-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Ville Syrjälä [Thu, 23 Mar 2017 19:27:12 +0000 (21:27 +0200)]
drm/i915: Use i9xx_check_plane_surface() for sprite planes as well
All the pre-SKL sprite planes compute the x/y/tile offsets in a
similar way. There are a couple of minor differences but the primary
planes have those as well. Thus i9xx_check_plane_surface()
already does what we need, so let's use it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-7-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Thu, 23 Mar 2017 19:27:11 +0000 (21:27 +0200)]
drm/i915: Eliminate ironlake_update_primary_plane()
The effective difference between i9xx_update_primary_plane()
and ironlake_update_primary_plane() is only the HSW/BDW
DSPOFFSET special case. So bring that over into
i9xx_update_primary_plane() and eliminate the duplicated code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-6-ville.syrjala@linux.intel.com
Ville Syrjälä [Thu, 23 Mar 2017 19:27:10 +0000 (21:27 +0200)]
drm/i915: Introduce i9xx_check_plane_surface()
Extract the primary plane surfae offset/x/y calculations for
pre-SKL platforms into a common function, and call it during the
atomic check phase to reduce the amount of stuff we have to do
during the commit phase. SKL is already doing this.
v2: Update the comment about the rotation adjustments to
match the code better (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-5-ville.syrjala@linux.intel.com
Ville Syrjälä [Thu, 23 Mar 2017 19:27:09 +0000 (21:27 +0200)]
drm/i915: Pre-compute plane control register value
Computing the plane control register value is branchy so moving it out
from the plane commit hook seems prudent. Let's pre-compute it during
the atomic check phase and store the result in the plane state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-4-ville.syrjala@linux.intel.com
Ville Syrjälä [Thu, 23 Mar 2017 19:27:08 +0000 (21:27 +0200)]
drm/i915: Nuke ironlake_plane_ctl()
Share the code to compute the primary plane control register value
between the i9xx and ilk codepaths as the differences are minimal.
Actually there are no differences between g4x and ilk, so the
current split doesn't really make any sense.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Thu, 23 Mar 2017 19:27:07 +0000 (21:27 +0200)]
drm/i915: Extract i9xx_plane_ctl() and ironlake_plane_ctl()
Pull the code to calculate the pre-SKL primary plane control register
value into separate functions. Allows us to pre-compute it in the
future.
v2: Split the pre-ilk vs. ilk+ unification to a separate patch (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Fri, 24 Mar 2017 16:35:40 +0000 (16:35 +0000)]
drm/i915: Use BIT() for computing the engine's flag
Since the engine's flag is just the bit of its id, use BIT().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324163540.31981-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Fri, 24 Mar 2017 16:35:39 +0000 (16:35 +0000)]
drm/i915: Remove unused intel_flush_status_page()
intel_flush_status_page() is defunct since commit
f8dd2934c4ec
("drm/i915: Remove BXT incoherent seqno write workaround"), time to
remove it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324163540.31981-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Fri, 24 Mar 2017 16:35:38 +0000 (16:35 +0000)]
drm/i915: Fixup intel_write_status_page() for old CPUs without clflush
Not all of our target platforms have clflush. For those without, just
assume the status page is sufficiently coherent that we do not need our
paranoia.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes:
14a6bbf9e535 ("drm/i915: Replace irq_seqno_barrier on hws write with a clflush")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324163540.31981-1-chris@chris-wilson.co.uk
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Chris Wilson [Sat, 25 Mar 2017 11:32:43 +0000 (11:32 +0000)]
drm/i915: Align "unfenced" tiled access on gen2, early gen3
Old devices have quite severe restrictions for using fences, and unlike
more recent device (anything from Pineview onwards) we need to enforce
those restrictions even for unfenced tiled access from the render
pipeline.
Fixes:
944397f04f24 ("drm/i915: Store required fence size/alignment for GGTT vma")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170325113243.16438-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Chris Wilson [Fri, 24 Mar 2017 16:54:18 +0000 (16:54 +0000)]
drm/i915: Limit number of reads to stabilize rc6 counter reads
We have only 8bits of precise timestamps in which to complete our
upper/load reads, along with the switch between precision. This is not
always enough time to read the upper counter twice within the same time
slice, leading to hard lockups. Limit the number of times to prevent
an inifite loop (my fault for assuming we would have no trouble doing
the write + reads fast enough).
Fixes:
47c21d9a1a7b ("drm/i915: Extend vlv/chv residency resolution")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100377
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324165418.7455-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Chris Wilson [Thu, 23 Mar 2017 15:00:53 +0000 (15:00 +0000)]
drm/i915: Check we have an wake device before flushing GTT writes
We can assume that if the device is asleep then all pending GTT writes
will have been posted, and so we can defer the flush from
i915_gem_object_flush_gtt_write_domain()
[ 1957.462568] WARNING: CPU: 0 PID: 6132 at drivers/gpu/drm/i915/intel_drv.h:1742 fwtable_read32+0x123/0x150 [i915]
[ 1957.462582] RPM wakelock ref not held during HW access
[ 1957.462583] Modules linked in: i915 intel_gtt drm_kms_helper prime_numbers
[ 1957.462607] CPU: 0 PID: 6132 Comm: gem_concurrent_ Tainted: G U 4.11.0-rc1+ #464
[ 1957.462619] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[ 1957.462630] Call Trace:
[ 1957.462646] dump_stack+0x4d/0x6f
[ 1957.462657] __warn+0xc1/0xe0
[ 1957.462667] warn_slowpath_fmt+0x4a/0x50
[ 1957.462709] fwtable_read32+0x123/0x150 [i915]
[ 1957.462750] i915_gem_object_flush_gtt_write_domain+0x43/0x70 [i915]
[ 1957.462791] i915_gem_object_set_to_cpu_domain+0x46/0xa0 [i915]
[ 1957.462831] i915_gem_set_domain_ioctl+0x15d/0x220 [i915]
[ 1957.462843] drm_ioctl+0x1d7/0x440
[ 1957.462885] ? i915_gem_obj_prepare_shmem_write+0x1d0/0x1d0 [i915]
[ 1957.462896] ? pick_next_task_fair+0x436/0x440
[ 1957.462906] ? mntput+0x1f/0x30
[ 1957.462915] do_vfs_ioctl+0x8f/0x5c0
[ 1957.462925] ? __schedule+0x16f/0x5f0
[ 1957.462935] ? ____fput+0x9/0x10
[ 1957.462943] SyS_ioctl+0x3c/0x70
[ 1957.462952] entry_SYSCALL_64_fastpath+0x17/0x98
[ 1957.462961] RIP: 0033:0x7fc542179ca7
[ 1957.462968] RSP: 002b:
00007ffeef12ff98 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 1957.462982] RAX:
ffffffffffffffda RBX:
00007ffeef1301d0 RCX:
00007fc542179ca7
[ 1957.462990] RDX:
00007ffeef12ffd0 RSI:
00000000400c645f RDI:
0000000000000003
[ 1957.462999] RBP:
0000000000000003 R08:
000055f433bc7c40 R09:
000000000000002c
[ 1957.463006] R10:
0000000000000073 R11:
0000000000000246 R12:
0000000000000018
[ 1957.463015] R13:
000055f432c89d20 R14:
000055f432c87690 R15:
0000000000000000
Fixes:
3b5724d702ef ("drm/i915: Wait for writes through the GTT to land before reading back")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323150053.28582-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Sat, 25 Mar 2017 20:10:53 +0000 (20:10 +0000)]
drm/i915/execlists: Trim irq handler
I noticed that gcc was spilling the CSB to the stack, so rearrange the
code to be more compact. Spilling in this function is slightly more
interesting due to the mmio reads acting as memory barriers and so
end up flushing the stack spills. Still miniscule to having to do at
least the pair of uncached reads :(
function old new delta
intel_lrc_irq_handler 1039 878 -161
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170325201053.21306-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Michal Wajdeczko [Mon, 27 Mar 2017 09:45:10 +0000 (09:45 +0000)]
drm/i915/uc: Make intel_uc_prepare_fw() static
There is no need to expose this function as it is called from
one function only. Also move it up to avoid forward declaration.
v2: drop intel_ prefix (Oscar) and rename to fetch_uc_fw (Michal)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327094510.167400-1-michal.wajdeczko@intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Fri, 24 Mar 2017 15:17:24 +0000 (15:17 +0000)]
drm/i915: Fix semaphore emission for BDW+ RCS ringbuffer emission
The required number of dwords for semaphore emission on BDW RCS is 8,
not 6 - leading to ring buffer corruption and immediate GPU hangs when
using ringbuffer submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324151724.32640-2-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Chris Wilson [Fri, 24 Mar 2017 15:17:23 +0000 (15:17 +0000)]
drm/i915: Disable MI_SET_CONTEXT psmi w/a for bdw
The current w/a for the gen7 psmi related hangs doesn't apply to bdw, so
disable it if using bdw ringbuffer submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324151724.32640-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Daniele Ceraolo Spurio [Fri, 24 Mar 2017 14:48:39 +0000 (07:48 -0700)]
drm/i915/guc: limit forcewake to blitter domain in guc_send
The forcewake_get call in the guc_send_mmio function was added to
avoid getting and releasing forcewake on each register access.
While this makes sense, all GuC registers are in the blitter range
so no need to wake all the wells.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490366919-34715-1-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Thu, 23 Mar 2017 23:00:00 +0000 (23:00 +0000)]
drm/i915/guc: Refactor the retrieval of guc_process_desc
Move the common "client->vaddr + client->proc_desc_offset" to its own
function, __get_process_desc() to match the newly established pattern.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323230000.20786-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Chris Wilson [Thu, 23 Mar 2017 13:48:03 +0000 (13:48 +0000)]
drm/i915/execlists: Relax the locked clear_bit(IRQ_EXECLIST)
We only need to care about the ordering of the clearing of the bit with
the uncached CSB read in order to correctly detect a new interrupt
before the read completes. The uncached read itself acts as a full
memory barrier, so we do not need to enforce another in the form of a
locked clear_bit.
v2: Clarify why the split and unlocked test/clear is harmless.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323134803.10418-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Ville Syrjälä [Fri, 17 Mar 2017 21:18:01 +0000 (23:18 +0200)]
drm/i915: Extract i845_cursor_ctl() and i9xx_cursor_ctl()
Pull the code to calculate the cursor control register value into
separate functions. Allows us to pre-compute them in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-8-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Fri, 17 Mar 2017 21:18:00 +0000 (23:18 +0200)]
drm/i915: Extract ilk_sprite_ctl()
Pull the code to calculate the ILK-SNB sprite control register value
into a separate function. Allows us to pre-compute it in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-7-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Fri, 17 Mar 2017 21:17:59 +0000 (23:17 +0200)]
drm/i915: Extract ivb_sprite_ctl()
Pull the code to calculate the IVB-BDW sprite control register value
into a separate function. Allows us to pre-compute it in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Fri, 17 Mar 2017 21:17:58 +0000 (23:17 +0200)]
drm/i915: Extract vlv_sprite_ctl()
Pull the code to calculate the VLV/CHV sprite control register value
into a separate function. Allows us to pre-compute it in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Fri, 17 Mar 2017 21:17:56 +0000 (23:17 +0200)]
drm/i915: Use skl_plane_ctl() for the SKL "sprite" planes
On SKL the planes are uniform so the "sprites" can use the
primary plane code perfectly fine. The only difference we
have is the color key handling, but since we never enable that
for the primary plane the same code works just fine.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Fri, 17 Mar 2017 21:17:55 +0000 (23:17 +0200)]
drm/i915: Extract skl_plane_ctl()
Pull the code to calculate the SKL plane control register value into
a separate function. Allows us to pre-compute it in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Oscar Mateo [Wed, 22 Mar 2017 17:39:55 +0000 (10:39 -0700)]
drm/i915/guc: Move guc_interrupts_release next to guc_interrupts_capture
They go better together.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Oscar Mateo [Wed, 22 Mar 2017 17:39:54 +0000 (10:39 -0700)]
drm/i915/guc: Split out the mmio_white_list struct
We are going to need it for future platforms.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Oscar Mateo [Wed, 22 Mar 2017 17:39:53 +0000 (10:39 -0700)]
drm/i915/guc: Refactor the concept "GuC context descriptor" into "GuC stage descriptor"
A GuC context and a HW context are in no way related, so the name "GuC context descriptor"
is very unfortunate, because a new reader of the code gets overwhelmed very quickly with
a lot of things called "context" that refer to different things. We can improve legibility
a lot by simply renaming a few objects in the GuC code.
v2:
- Rebased
- s/ctx_desc_pool/stage_desc_pool
- Move some explanations to the definition of the guc_stage_desc struct (Chris)
v3:
- Calculate gemsize with less intermediate steps (Joonas)
- Use BIT() macro (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Oscar Mateo [Wed, 22 Mar 2017 17:39:52 +0000 (10:39 -0700)]
drm/i915/guc: A little bit more of doorbell sanitization
Some recent refactoring patches have left the doorbell creation outside
the GuC client allocation, which does not make a lot of sense (a client
without a doorbell is something useless). Move it back there, and
refactor the init_doorbell_hw consequently.
Thanks to this, we can do some other improvements, like hoisting the
check for GuC submission enabled out of the enable function.
v2: Rebased.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Oscar Mateo [Wed, 22 Mar 2017 17:39:51 +0000 (10:39 -0700)]
drm/i915/guc: Wait for doorbell to be inactive before deallocating
Doorbell release flow requires that we wait for GEN8_DRB_VALID bit to go
to zero after updating db_status before we call the GuC to release the
doorbell.
Kudos to Daniele for finding this out.
v2: WARN instead of DRM_ERROR (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Oscar Mateo [Wed, 22 Mar 2017 17:39:50 +0000 (10:39 -0700)]
drm/i915/guc: Improve the GuC documentation & comments about proxy submissions
While at it, fix a typo (s/ring_lcra/ring_lrca) and improve the naming of one
firware interface field (s/ring_tail/submit_element_info, since it can contain
more than just the ring tail).
No change in functionality.
v2:
- Remove reference to "unique user" of the GuC (Daniele)
- Keep mention to renaming from "GuC context" to "client" (Daniele)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Oscar Mateo [Wed, 22 Mar 2017 17:39:49 +0000 (10:39 -0700)]
drm/i915/guc: Make intel_guc_send a function pointer
Prepare for an alternate GuC communication interface.
v2: Make a few functions static and name them correctly while we are at it (Oscar), but
leave an intel_guc_send_mmio interface for users that require old-style communication.
v3: Send intel_uc_init_early back to the top (Michal).
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Oscar Mateo [Wed, 22 Mar 2017 17:39:48 +0000 (10:39 -0700)]
drm/i915/guc: Break out the GuC log extras into their own "runtime" struct
When initializing the GuC log struct, there is an object we need to
allocate always, since the GuC needs its address at fw load time.
The rest is only needed during runtime, in the sense that we only
create if we actually enable GuC logging. Make that distinction
explicit by subdividing further the intel_guc_log struct.
v2: Call the new struct "runtime", instead of "extras" (Joonas)
v3: Check indent (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Oscar Mateo [Wed, 22 Mar 2017 17:39:47 +0000 (10:39 -0700)]
drm/i915/guc: The Additional Data Struct (ADS) should get enabled together with GuC submission
It's mandatory and it gets created if and only if GuC submission is enabled, so that should be
the condition for informing the GuC about it.
Also s/guc_addon_create/guc_ads_create and s/guc_addon_destroy/guc_ads_destroy and, while
at it, add an explanation of what things go inside the ADS object.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Oscar Mateo [Wed, 22 Mar 2017 17:39:46 +0000 (10:39 -0700)]
drm/i915/guc: Add onion teardown to the GuC setup
Starting with intel_guc_loader, down to intel_guc_submission
and finally to intel_guc_log.
v2:
- Null execbuf client outside guc_client_free (Daniele)
- Assert if things try to get allocated twice (Daniele/Joonas)
- Null guc->log.buf_addr when destroyed (Daniele)
- Newline between returning success and error labels (Joonas)
- Remove some unnecessary comments (Joonas)
- Keep guc_log_create_extras naming convention (Joonas)
- Helper function guc_log_has_extras (Joonas)
- No need for separate relay_channel create/destroy. It's just another extra.
- No need to nullify guc->log.flush_wq when destroyed (Joonas)
- Hoist the check for has_extras out of guc_log_create_extras (Joonas)
- Try to do i915_guc_log_register/unregister calls (kind of) symmetric (Daniele)
- Make sure initel_guc_fini is not called before init is ever called (Daniele)
v3:
- Remove unnecessary parenthesis (Joonas)
- Check for logs enabled on debugfs registration
- Rebase on top of Tvrtko's "Fix request re-submission after reset"
v4:
- Rebased
- Comment around enabling/disabling interrupts inside GuC logging (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Oscar Mateo [Wed, 22 Mar 2017 17:39:45 +0000 (10:39 -0700)]
drm/i915/guc: Keep the ctx_pool_vaddr mapped, for easy access
The GuC descriptor is big in size. If we use a local definition of
guc_desc we have a chance to overflow stack, so avoid it.
Also, Chris abhors scatterlists :)
v2: Rebased, helper function to retrieve the context descriptor,
s/ctx_pool_vma/ctx_pool/
v3: Zero out guc_context_desc before initialization
v4: Do not do arithmetic on void pointers (Daniele)
v5: Nicer than arithmetic on pointers (Chris, Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Joonas Lahtinen [Wed, 22 Mar 2017 17:39:44 +0000 (10:39 -0700)]
drm/i915/guc: Sanitize GuC client initialization
Started adding proper teardown to guc_client_alloc, ended up removing
quite a few dead ends where errors communicating with the GuC were
silently ignored. There also seemed to be quite a few erronous
teardown actions performed in case of an error (ordering wrong).
v2:
- Increase function symmetry/proximity (Michal/Daniele)
- Fix __reserve_doorbell accounting for high priority (Daniele)
- Call __update_doorbell_desc! (Daniele)
- Isolate __guc_{,de}allocate_doorbell (Michal/Daniele)
v3:
- "Select" a cacheline is a more accurate verb than "reserve" (Daniele).
- We cannot update & create the doorbell without reserving it first, so
move the whole doorbell creation for execbuf_client to the submission
enable (Oscar).i
- Add a fixme for ignoring possible doorbell destroy errors.
v4:
- Remove comment about is_high_priority (Daniele)
- Debug message typo (Daniele)
- Reuse __get_doorbell in more places (Daniele)
- Do not do arithmetic on void pointers (Daniele)
- Add comment to __reset_doorbell (Daniele)
v5:
- gccisms like arithmetic on void pointers are not frowned upon (Oscar)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Chris Wilson [Thu, 23 Mar 2017 08:57:58 +0000 (08:57 +0000)]
drm/i915: Wait for all fences before installing an exclusive clflush fence
Ensure that before we overwrite the reservation_object with our
exclusive fence for the pending clflush operation, that we do wait upon
all the fences in the current reservation_object.
Fixes:
57822dc6b9cf ("drm/i915: Perform object clflushing asynchronously")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323085758.11695-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Chris Wilson [Thu, 23 Mar 2017 10:19:44 +0000 (10:19 +0000)]
drm/i915: Drop uncore spinlock for reading debugfs forcewake counters
The set of available structs is not protected by the spinlock, and for
the single read we can use READ_ONCE instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-7-chris@chris-wilson.co.uk
Chris Wilson [Thu, 23 Mar 2017 10:19:43 +0000 (10:19 +0000)]
drm/i915: All fw_domains share the same set/clear/reset values
Since we reuse the same values for each fw_domain, move them onto
uncore.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-6-chris@chris-wilson.co.uk
Chris Wilson [Thu, 23 Mar 2017 10:19:42 +0000 (10:19 +0000)]
drm/i915: Remove posting-read for forcewake put
We can relax the requirement upon ourselves that the forcewake is
released immediately and just allow it to occur naturally following our
mmio request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-5-chris@chris-wilson.co.uk
Chris Wilson [Thu, 23 Mar 2017 10:19:41 +0000 (10:19 +0000)]
drm/i915: Skip unused fw_domains
Use find-first-set bitop to quickly scan through the fw_domains mask and
skip iterating over unused domains.
v2: Move the WARN into the caller, to prevent compiler warnings in
normal builds.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-4-chris@chris-wilson.co.uk
Chris Wilson [Thu, 23 Mar 2017 10:19:40 +0000 (10:19 +0000)]
drm/i915: Use correct fw_domains during reset
In the next patch we will begin to sanity check that we do not attempt
to obtain the forcewake on an unsupport domain. However, that is exactly
what we do during reset of the fw_domains - rectify it before it explodes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-3-chris@chris-wilson.co.uk
Chris Wilson [Thu, 23 Mar 2017 10:19:39 +0000 (10:19 +0000)]
drm/i915: Use correct fw_domains during initialisation
In the next patch we will begin to sanity check that we do not attempt
to obtain the forcewake on an unsupport domain. However, that is exactly
what we do during our actual initialisation of fw_domains - rectify it
before it explodes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 23 Mar 2017 10:19:38 +0000 (10:19 +0000)]
drm/i915: Eliminate per-fw_domain i915 backpointer
Pass along the drm_i915_private pointer from the caller, rather than
looking it up from each fw_domain during fw_domains_get/_put. This
allows us to then eliminate the backpointer, in exchange for a more
complicated unwrapping procedure in the rare
intel_uncore_fw_release_timer().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 22 Mar 2017 20:59:30 +0000 (20:59 +0000)]
drm/i915: Restore marking context objects as dirty on pinning
Commit
e8a9c58fcd9a ("drm/i915: Unify active context tracking between
legacy/execlists/guc") converted the legacy intel_ringbuffer submission
to the same context pinning mechanism as execlists - that is to pin the
context until the subsequent request is retired. Previously it used the
vma retirement of the context object to keep itself pinned until the
next request (after i915_vma_move_to_active()). In the conversion, I
missed that the vma retirement was also responsible for marking the
object as dirty. Mark the context object as dirty when pinning
(equivalent to execlists) which ensures that if the context is swapped
out due to mempressure or suspend/hibernation, when it is loaded back in
it does so with the previous state (and not all zero).
Fixes:
e8a9c58fcd9a ("drm/i915: Unify active context tracking between legacy/execlists/guc")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Reported-by: Mathieu Marquer <mathieu.marquer@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99993
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100181
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1
Link: http://patchwork.freedesktop.org/patch/msgid/20170322205930.12762-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Wed, 22 Mar 2017 21:03:50 +0000 (21:03 +0000)]
drm/i915: Remove superfluous hw_flags from mi_set_context()
Why have both hw_flags and flags, when just one will do?
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322210350.6208-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Wed, 22 Mar 2017 22:34:47 +0000 (22:34 +0000)]
drm/i915: Actually pass the reclaim gfp_t along to shmemfs!
Words cannot describe the embarrassment at creating a new gfp_t relaim to
only prevent the oomkiller but allow direct|kswapd reclaim, and then not
use it in the shmem_read_mapping_page_gfp().
Fixes:
24f8e00a8a2e ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322223447.7493-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Daniel Vetter [Thu, 23 Mar 2017 07:15:18 +0000 (08:15 +0100)]
Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued
Backmerge drm-next to get at the hdmi2.0 helper functions.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Dave Airlie [Thu, 23 Mar 2017 02:05:13 +0000 (12:05 +1000)]
BackMerge tag 'v4.11-rc3' into drm-next
Linux 4.11-rc3 as requested by Daniel
Dave Airlie [Wed, 22 Mar 2017 22:53:41 +0000 (08:53 +1000)]
Merge tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc into drm-next
drm-misc for 4.12, 2nd attempt this week:
- topic branch from Jon Corbet for the new graph kerneldoc support
- lots of graphs for kms/atomic things using the above
- some vblank query tuning from Chris
- gem/cma_fops macros
- moar docs
Driver stuff:
- vc4 hdmi audio, yay (Eric)
- dw-hdmi polish from a bunch of people
- some rockchip dp updates that didn't make last week (Chris Zhong)
- misc bridge&driver updates
* tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc: (37 commits)
drm/edid: detect SCDC support in HF-VSDB
drm/edid: detect SCDC support in HF-VSDB
drm/edid: check for HF-VSDB block
drm: Add SCDC helpers
drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config
drm/bridge: dw_hdmi: support i2c extended read mode
drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup
drm: bochs: Don't remove uninitialized fbdev framebuffer
drm: vc4: remove redundant check of plane being non-null
drm/vc4: use platform_register_drivers
dma-fence: add dma_fence_match_context helper
drm/vc4: Add HDMI audio support
dt-bindings: Document the dmas and dma-names properties for VC4 HDMI
drm/atmel-hlcdc: Fix suspend/resume implementation
drm: Skip the waitqueue setup for vblank queries
drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)
drm/doc: atomic overview, with graph
drm/doc: diagram for mode objects and properties
drm/doc: Consistent kerneldoc include order
drm/doc: Add KMS overview graphs
...
Dave Airlie [Wed, 22 Mar 2017 22:47:23 +0000 (08:47 +1000)]
Merge tag 'drm-intel-next-2017-03-20' of git://anongit.freedesktop.org/git/drm-intel into drm-next
More in i915 for 4.12:
- designware i2c fixes from Hans de Goede, in a topic branch shared
with other subsystems (maybe, they didn't confirm, but requested the
pull)
- drop drm_panel usage from the intel dsi vbt panel (Jani)
- vblank evasion improvements and tracing (Maarten and Ville)
- clarify spinlock irq semantics again a bit (Tvrtko)
- new ->pwrite backend hook (right now just for shmem pageche writes),
from Chris
- more planar/ccs work from Ville
- hotplug safe connector iterators everywhere
- userptr fixes (Chris)
- selftests for cache coloring eviction (Matthew Auld)
- extend debugfs drop_caches interface for shrinker testing (Chris)
- baytrail "the rps kills the machine" fix (Chris)
- use new atomic state iterators, a lot (Maarten)
- refactor guc/huc code some (Arkadiusz Hiler)
- tighten breadcrumbs rbtree a bit (Chris)
- improve wrap-around and time handling in rps residency counters
(Mika)
- split reset-in-progress in two flags, backoff and handoff (Chris)
- other misc reset improvements from a few people
- bunch of vgpu interaction fixes with recent code changes
- misc stuff all over, as usual
* tag 'drm-intel-next-2017-03-20' of git://anongit.freedesktop.org/git/drm-intel: (144 commits)
drm/i915: Update DRIVER_DATE to
20170320
drm/i915: Initialise i915_gem_object_create_from_data() directly
drm/i915: Correct error handling for i915_gem_object_create_from_data()
drm/i915: i915_gem_object_create_from_data() doesn't require struct_mutex
drm/i915: Retire an active batch pool object rather than allocate new
drm/i915: Add i810/i815 pci-ids for completeness
drm/i915: Skip execlists_dequeue() early if the list is empty
drm/i915: Stop using obj->obj_exec_link outside of execbuf
drm/i915: Squelch WARN for VLV_COUNTER_CONTROL
drm/i915/glk: Enable pooled EUs for Geminilake
drm/i915: Remove superfluous i915_add_request_no_flush() helper
drm/i915/vgpu: Neuter forcewakes for VGPU more thoroughly
drm/i915: Fix vGPU balloon for ggtt guard page
drm/i915: Avoid use-after-free of ctx in request tracepoints
drm/i915: Assert that the context pin_counts do not overflow
drm/i915: Wait for reset to complete before returning from debugfs/i915_wedged
drm/i915: Restore engine->submit_request before unwedging
drm/i915: Move engine->submit_request selection to a vfunc
drm/i915: Split I915_RESET_IN_PROGRESS into two flags
drm/i915: make context status notifier head be per engine
...
Ville Syrjälä [Tue, 14 Mar 2017 15:10:50 +0000 (17:10 +0200)]
drm/i915: Fix SKL cursor watermarks
Use intel_wm_plane_visible() to determine cursor visibility for SKL+
also. Previously SKL+ would check the actual visibility which now
conflicts with the assumptions in intel_legacy_cursor_update().
We also change SKL+ to compute the cursor watermarks based on the
unclipped cursor size, just as we do on all the other platforms.
Using the clipped size could now result in garbage results.
Testcase: igt/kms_chv_cursor_fail
Fixes:
a5509abda48e ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100195
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314151050.12194-2-ville.syrjala@linux.intel.com
Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@collabora.co.uk>
Tested-by: Jari Tahvanainen <jari.tahvanainen@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Ville Syrjälä [Tue, 14 Mar 2017 15:10:49 +0000 (17:10 +0200)]
drm/i915: Extract intel_wm_plane_visible()
All platforms that lack double buffered watermarks will need to
handle the legacy cursor updates in the same way. So let's extract the
logic to determine the plane visibility into a small helper. For
simplicity we'll make the function DTRT for any plane, but only apply
the special sauce for cursor planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314151050.12194-1-ville.syrjala@linux.intel.com
Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Chris Wilson [Wed, 22 Mar 2017 11:05:21 +0000 (11:05 +0000)]
drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations
Since gfx allocations tend to be large, unmovable and disposable, report
the allocation failure back to userspace as an ENOMEM rather than incur
the oomkiller. We have already tried to make room by purging our own
cached gfx objects, and the oomkiller doesn't attribute ownership of gfx
objects so will likely pick the wrong candidate. Instead, let userspace
see the ENOMEM.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322110521.29930-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Wed, 22 Mar 2017 18:58:44 +0000 (15:58 -0300)]
drm/i915: simplify intel_ddi_pll_select()
Because {hsw,skl,bxt}_ddi_pll_select all pretty much do the same thing
in slightly different ways. Replace everything with a simple copy of
the function and inline it inside intle_ddi_pll_select().
v2: s/return pll/return pll != NULL/ (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490209125-20046-1-git-send-email-paulo.r.zanoni@intel.com
Pandiyan, Dhinakaran [Tue, 14 Mar 2017 22:45:56 +0000 (15:45 -0700)]
drm/i915: Implement cdclk restrictions based on Azalia BCLK
According to BSpec, "The CD clock frequency must be at least twice the
frequency of the Azalia BCLK." and BCLK is configured to 96 MHz by
default. This check is needed because BXT and GLK support cdclk
frequencies less than 192 MHz.
v2: Include other Gen9 platforms too for completeness.(Paulo)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489531556-2926-1-git-send-email-dhinakaran.pandiyan@intel.com
Pandiyan, Dhinakaran [Wed, 8 Mar 2017 00:12:51 +0000 (16:12 -0800)]
drm/i915/glk: Apply cdclk workaround for DP audio
Implement the DP-Audio cdclk restriction for GLK, similar to what is
implemented for BDW and other GEN9 platforms. The max. pixel clock
adjustment for GLK, however factors in the 2 pixels per clock output that
GLK generates.
Separating min. cdclk and max. pixel_rate would be nicer, but let's
defer that to future and fix the GLK bug for now.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488931972-2865-1-git-send-email-dhinakaran.pandiyan@intel.com
Tvrtko Ursulin [Tue, 21 Mar 2017 10:55:11 +0000 (10:55 +0000)]
drm/i915: Spinlocks in tasklets can use spin_(un)lock_irq
The tasklets callbacks are only called from tasklet context so
it is safe do to this.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321105511.18269-1-tvrtko.ursulin@linux.intel.com
Chris Wilson [Tue, 21 Mar 2017 10:25:52 +0000 (10:25 +0000)]
drm/i915: Remove intel_ring.last_retired_head
Storing the position of the breadcrumb of the last retired request as
a separate last_retired_head is superfluous as we always copy that into
head prior to recalculation of the intel_ring.space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321102552.24357-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 21 Mar 2017 11:33:20 +0000 (11:33 +0000)]
drm/i915/execlists: Split the atomic test_and_clear_bit for irq handler
Rather than impose the cost of a locked test before queuing a new
request, reduce it to a simple test_bit() with a following clear_bit()
prior to doing the CSB check. This ensure that if an interrupt does
occur whilst reading from the CSB, we still detect it (the interrupt
would trigger a rescheduling of the tasklet anyway).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321113320.2603-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Arnd Bergmann [Mon, 20 Mar 2017 09:40:28 +0000 (10:40 +0100)]
drm/i915: split out check for noncontiguous pfn range
We get a warning with gcc-7 about a pointless comparison when
using a linear memmap:
drivers/gpu/drm/i915/selftests/scatterlist.c: In function 'alloc_table':
drivers/gpu/drm/i915/selftests/scatterlist.c:219:66: error: self-comparison always evaluates to false [-Werror=tautological-compare]
Splitting out the comparison into a separate function avoids the warning
and makes it slightly more obvious what happens.
Fixes:
935a2f776aa5 ("drm/i915: Add some selftests for sg_table manipulation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320094335.1266306-2-arnd@arndb.de
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Mon, 20 Mar 2017 14:56:09 +0000 (14:56 +0000)]
drm/i915: intel_engine_init_global_seqno() requires atomic kmap
As intel_engine_init_global_seqno() may be called by
nop_submit_request() from inside irq context, we have to use atomic
versions of kmap/kunmap. This is rare as this requires using gen8 legacy
ringbuffer submission.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320145609.4898-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Mon, 20 Mar 2017 14:31:33 +0000 (14:31 +0000)]
drm/i915: Protect intel_engine_wakeup() for call from irq context
intel_engine_wakeup() is called by nop_request_submit() which is
installed to handle third party fences completed from within irq
context. As such, it needs the full irqsave/irqrestore and not the
partial spin_irq_lock handling.
[18942.714467] =================================
[18942.719076] [ INFO: inconsistent lock state ]
[18942.723522] 4.11.0-rc2-CI-CI_DRM_2368+ #1 Tainted: G U W
[18942.729970] ---------------------------------
[18942.734466] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[18942.740594] gem_eio/1275 [HC0[0]:SC0[0]:HE1:SE1] takes:
[18942.745932] (&(&fence->lock)->rlock){+.?...}, at: [<
ffffffff815ec100>] dma_fence_signal+0x100/0x
230
[18942.755331] {IN-SOFTIRQ-W} state was registered at:
[18942.760356] __lock_acquire+0x5d0/0x1bb0
[18942.764444] lock_acquire+0xc9/0x220
[18942.768196] _raw_spin_lock_irqsave+0x41/0x60
[18942.772747] dma_fence_signal+0x100/0x230
[18942.776927] vgem_fence_timeout+0x9/0x10 [vgem]
[18942.781701] call_timer_fn+0x92/0x380
[18942.785557] expire_timers+0x150/0x1f0
[18942.789491] run_timer_softirq+0x7c/0x160
[18942.793705] __do_softirq+0x116/0x4c0
[18942.797560] irq_exit+0xa9/0xc0
[18942.800873] smp_apic_timer_interrupt+0x38/0x50
[18942.805611] apic_timer_interrupt+0x90/0xa0
[18942.810008] cpuidle_enter_state+0x135/0x380
[18942.814503] cpuidle_enter+0x12/0x20
[18942.818250] call_cpuidle+0x1e/0x40
[18942.821906] do_idle+0x17e/0x1f0
[18942.825333] cpu_startup_entry+0x18/0x20
[18942.829463] rest_init+0x127/0x130
[18942.833025] start_kernel+0x3f1/0x3fe
[18942.836908] x86_64_start_reservations+0x2a/0x2c
[18942.841733] x86_64_start_kernel+0x173/0x186
[18942.846234] verify_cpu+0x0/0xfc
[18942.849604] irq event stamp: 30568
[18942.853140] hardirqs last enabled at (30567): [<
ffffffff8110b81f>] ktime_get+0xef/0x120
[18942.861468] hardirqs last disabled at (30568): [<
ffffffff81876377>] _raw_spin_lock_irqsave+0x17/0
x60
[18942.870812] softirqs last enabled at (30462): [<
ffffffff81085cd9>] __do_softirq+0x1d9/0x4c0
[18942.879443] softirqs last disabled at (30439): [<
ffffffff81086139>] irq_exit+0xa9/0xc0
[18942.887616]
[18942.887616] other info that might help us debug this:
[18942.894279] Possible unsafe locking scenario:
[18942.894279]
[18942.900336] CPU0
[18942.902851] ----
[18942.905362] lock(&(&fence->lock)->rlock);
[18942.909647] <Interrupt>
[18942.912330] lock(&(&fence->lock)->rlock);
[18942.916821]
[18942.916821] *** DEADLOCK ***
[18942.916821]
[18942.922862] 1 lock held by gem_eio/1275:
[18942.926859] #0: (&(&fence->lock)->rlock){+.?...}, at: [<
ffffffff815ec100>] dma_fence_signal+0x1
00/0x230
[18942.936651]
[18942.936651] stack backtrace:
[18942.941142] CPU: 3 PID: 1275 Comm: gem_eio Tainted: G U W 4.11.0-rc2-CI-CI_DRM_2368+ #
1
[18942.950367] Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F21 01/06/2
017
[18942.959756] Call Trace:
[18942.962244] dump_stack+0x67/0x92
[18942.965626] print_usage_bug.part.23+0x259/0x268
[18942.970362] mark_lock+0x12c/0x6f0
[18942.973851] ? check_usage_forwards+0x130/0x130
[18942.978487] mark_held_locks+0x6f/0xa0
[18942.982329] ? _raw_spin_unlock_irq+0x27/0x50
[18942.986797] trace_hardirqs_on_caller+0x150/0x200
[18942.991599] trace_hardirqs_on+0xd/0x10
[18942.995515] _raw_spin_unlock_irq+0x27/0x50
[18942.999796] intel_engine_wakeup+0x26/0x30 [i915]
[18943.004670] intel_engine_init_global_seqno+0x131/0x1a0 [i915]
[18943.010745] nop_submit_request+0x2e/0x40 [i915]
[18943.015476] submit_notify+0x3f/0x5c [i915]
[18943.019763] __i915_sw_fence_complete+0x176/0x220 [i915]
[18943.025234] ? try_to_del_timer_sync+0x4d/0x60
[18943.029825] i915_sw_fence_complete+0x25/0x40 [i915]
[18943.034887] dma_i915_sw_fence_wake+0x26/0x60 [i915]
[18943.039959] dma_fence_signal+0x146/0x230
[18943.044109] vgem_fence_signal_ioctl+0x6c/0xc0 [vgem]
[18943.049275] drm_ioctl+0x200/0x450
[18943.052758] ? vgem_fence_attach_ioctl+0x270/0x270 [vgem]
[18943.058334] do_vfs_ioctl+0x90/0x6e0
[18943.061991] ? entry_SYSCALL_64_fastpath+0x5/0xb1
[18943.066843] ? __this_cpu_preempt_check+0x13/0x20
[18943.071643] ? trace_hardirqs_on_caller+0xe7/0x200
[18943.076532] SyS_ioctl+0x3c/0x70
[18943.079842] entry_SYSCALL_64_fastpath+0x1c/0xb1
[18943.084558] RIP: 0033:0x7f0dfcc14357
[18943.088240] RSP: 002b:
00007ffeb4628da8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[18943.095996] RAX:
ffffffffffffffda RBX:
ffffffff8147eb93 RCX:
00007f0dfcc14357
[18943.103311] RDX:
00007ffeb4628de0 RSI:
0000000040086442 RDI:
0000000000000005
[18943.110574] RBP:
ffffc9000176ff88 R08:
0000000000000004 R09:
0000000000000000
[18943.117845] R10:
0000000000000029 R11:
0000000000000246 R12:
0000000000000001
[18943.125168] R13:
0000000000000005 R14:
0000000040086442 R15:
0000000000000000
[18943.132520] ? __this_cpu_preempt_check+0x13/0x20
Fixes:
cdc3a4539034 ("drm/i915: No need to save/restore irq status in intel_engine_wakeup")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320143133.1507-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tvrtko Ursulin [Mon, 20 Mar 2017 13:25:56 +0000 (13:25 +0000)]
drm/i915/guc: Correct the request_in tracepoint position
It has to be called after the global seqno has been assigned.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes:
31de73501ac9 ("drm/i915/scheduler: emulate a scheduler for guc")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320132556.29286-1-tvrtko.ursulin@linux.intel.com
Shashank Sharma [Mon, 13 Mar 2017 11:24:02 +0000 (16:54 +0530)]
drm/edid: detect SCDC support in HF-VSDB
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
- Add clock rate calculations for 1/10 and 1/40 ratios
- Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
Shashank Sharma [Mon, 13 Mar 2017 11:24:01 +0000 (16:54 +0530)]
drm/edid: detect SCDC support in HF-VSDB
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Rebase.
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com
Thierry Reding [Mon, 13 Mar 2017 11:24:00 +0000 (16:54 +0530)]
drm/edid: check for HF-VSDB block
This patch implements a small function that finds if a
given CEA db is hdmi-forum vendor specific data block
or not.
V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-3-git-send-email-shashank.sharma@intel.com
Thierry Reding [Mon, 13 Mar 2017 11:23:59 +0000 (16:53 +0530)]
drm: Add SCDC helpers
SCDC is a mechanism defined in the HDMI 2.0 specification that allows
the source and sink devices to communicate.
This commit introduces helpers to access the SCDC and provides the
symbolic names for the various registers defined in the specification.
V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Addressed review comments from Ville
- Handle the I2c return values in a better way (dp_dual_mode)
- Make the macros for SCDC Major/Minor more readable, by adding
a 'GET' in the macro names
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-2-git-send-email-shashank.sharma@intel.com
Nickey Yang [Tue, 21 Mar 2017 07:36:17 +0000 (15:36 +0800)]
drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config
Vendor specific infoframe is mandatory for 4K2K resolution.
Without this, the HDMI protocol compliance fails.
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490081777-2232-1-git-send-email-nickey.yang@rock-chips.com
Nickey Yang [Mon, 20 Mar 2017 02:57:31 +0000 (10:57 +0800)]
drm/bridge: dw_hdmi: support i2c extended read mode
"I2C Master Interface Extended Read Mode" implements a segment
pointer-based read operation using the Special Register configuration.
This patch fix https://patchwork.kernel.org/patch/
7098101/ mentioned
"The current implementation does not support "I2C Master Interface
Extended Read Mode" to read data addressed by non-zero segment
pointer, this means that if EDID has more than 1 extension blocks,
EDID reading operation won't succeed"
With this patch, dw-hdmi can read EDID data with 1/2/4 blocks.
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1489978651-16647-1-git-send-email-nickey.yang@rock-chips.com
Arnd Bergmann [Mon, 20 Mar 2017 09:39:25 +0000 (10:39 +0100)]
drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup
We now call those two functions even when they are not defined
or declared anywhere because DEBUG_FS is disabled:
drivers/gpu/drm/msm/msm_drv.c: In function 'msm_drm_uninit':
drivers/gpu/drm/msm/msm_drv.c:244:2: error: implicit declaration of function 'msm_perf_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration]
drivers/gpu/drm/msm/msm_drv.c:245:2: error: implicit declaration of function 'msm_rd_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration]
This adds empty stub implementations for that case.
Fixes:
85eac4700ede ("drm/msm: Remove msm_debugfs_cleanup()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320093936.1255573-1-arnd@arndb.de
Chris Wilson [Sat, 18 Mar 2017 10:42:57 +0000 (10:42 +0000)]
drm/i915: Skip force-wake for uncached mmio flush of GGTT writes
The trick of using an uncached mmio read to ensure that the GGTT writes
are flushed does not require us to do the forcewake dance, so avoid it
in the hope of reducing the frequency that we do keep the device forced
awake.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170318104257.694-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Chris Wilson [Sat, 18 Mar 2017 10:28:59 +0000 (10:28 +0000)]
drm/i915: Reset tasklet back to execlists after disabling guc
When switching back to execlists, we also now need to restore the
tasklet handler.
Reported-by: Oscar Mateo <oscar.mateo@intel.com>
Fixes:
31de73501ac9 ("drm/i915/scheduler: emulate a scheduler for guc")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170318102859.24101-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Gabriel Krisman Bertazi [Fri, 17 Mar 2017 18:14:09 +0000 (15:14 -0300)]
drm: bochs: Don't remove uninitialized fbdev framebuffer
In the same spirit of the fix for QXL in commit
861078381ba5 ("drm: qxl:
Don't alloc fbdev if emulation is not supported"), prevent the Oops in
the unbind path of Bochs if fbdev emulation is disabled.
[ 112.176009] Oops: 0002 [#1] SMP
[ 112.176009] Modules linked in: bochs_drm
[ 112.176009] CPU: 0 PID: 3002 Comm: bash Not tainted 4.11.0-rc1+ #111
[ 112.176009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[ 112.176009] task:
ffff8800743bbac0 task.stack:
ffffc90000b5c000
[ 112.176009] RIP: 0010:mutex_lock+0x18/0x30
[ 112.176009] RSP: 0018:
ffffc90000b5fc78 EFLAGS:
00010246
[ 112.176009] RAX:
0000000000000000 RBX:
0000000000000260 RCX:
0000000000000000
[ 112.176009] RDX:
ffff8800743bbac0 RSI:
ffff8800787176e0 RDI:
0000000000000260
[ 112.176009] RBP:
ffffc90000b5fc80 R08:
ffffffff00000000 R09:
00000000ffffffff
[ 112.176009] R10:
ffff88007b463650 R11:
0000000000000000 R12:
0000000000000260
[ 112.176009] R13:
ffff8800787176e0 R14:
ffffffffa0003068 R15:
0000000000000060
[ 112.176009] FS:
00007f20564c7b40(0000) GS:
ffff88007ce00000(0000) knlGS:
0000000000000000
[ 112.176009] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 112.176009] CR2:
0000000000000260 CR3:
000000006b89c000 CR4:
00000000000006f0
[ 112.176009] Call Trace:
[ 112.176009] drm_mode_object_unregister+0x1e/0x50
[ 112.176009] drm_framebuffer_unregister_private+0x15/0x20
[ 112.176009] bochs_fbdev_fini+0x57/0x70 [bochs_drm]
[ 112.176009] bochs_unload+0x16/0x50 [bochs_drm]
[ 112.176009] drm_dev_unregister+0x37/0xd0
[ 112.176009] drm_put_dev+0x31/0x60
[ 112.176009] bochs_pci_remove+0x10/0x20 [bochs_drm]
[ 112.176009] pci_device_remove+0x34/0xb0
[ 112.176009] device_release_driver_internal+0x150/0x200
[ 112.176009] device_release_driver+0xd/0x10
[ 112.176009] unbind_store+0x108/0x150
[ 112.176009] drv_attr_store+0x20/0x30
[ 112.176009] sysfs_kf_write+0x32/0x40
[ 112.176009] kernfs_fop_write+0x10b/0x190
[ 112.176009] __vfs_write+0x23/0x120
[ 112.176009] ? security_file_permission+0x36/0xb0
[ 112.176009] ? rw_verify_area+0x49/0xb0
[ 112.176009] vfs_write+0xb0/0x190
[ 112.176009] SyS_write+0x41/0xa0
[ 112.176009] entry_SYSCALL_64_fastpath+0x1a/0xa9
[ 112.176009] RIP: 0033:0x7f2055bd5620
[ 112.176009] RSP: 002b:
00007ffed2f487d8 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 112.176009] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f2055bd5620
[ 112.176009] RDX:
000000000000000d RSI:
0000000000ee0008 RDI:
0000000000000001
[ 112.176009] RBP:
0000000000000001 R08:
00007f2055e94760 R09:
00007f20564c7b40
[ 112.176009] R10:
0000000000000073 R11:
0000000000000246 R12:
0000000000000000
[ 112.176009] R13:
00007ffed2f48d70 R14:
0000000000000000 R15:
0000000000000000
[ 112.176009] Code: 00 00 00 55 be 02 00 00 00 48 89 e5 e8 62 fb ff ff 5d c3 55 48 89 e5 53 48 89 fb e8 53 e9 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <f0> 48 0f b1 13 48 85 c0 74 08 48 89 df e8c6 ff ff ff 5b 5d c3
[ 112.176009] RIP: mutex_lock+0x18/0x30 RSP:
ffffc90000b5fc78
[ 112.176009] CR2:
0000000000000260
[ 112.205622] ---[ end trace
76189cd7a9bdd155 ]---
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317181409.4183-1-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Daniel Vetter [Mon, 20 Mar 2017 07:21:05 +0000 (08:21 +0100)]
drm/i915: Update DRIVER_DATE to
20170320
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Mon, 20 Mar 2017 06:49:20 +0000 (16:49 +1000)]
Merge tag 'imx-drm-next-2017-03-17' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm PRE/PRG support, deferred plane disabling, separate alpha support
- Initial support for the Prefetch Resolve Engine/Gasket on i.MX6QP,
improving linear scanout buffer memory bandwidth utilization. This
will in the future grow reordering support and allow direct scanout
of Vivante tiled renderbuffers from the GPU.
- Deferred plane disabling gets rid of some busy waiting in the atomic
plane disable and crtc disable paths that lead to wait_for_vblank
timeouts.
- Add support for RGBA formats with a separate alpha plane, that can
reduce memory bandwidth utilization for mostly transparent overlay
planes by skipping color reads for completely transparent regions.
- Allow moving an active overlay plane without enforcing a modeset.
- Add 8-bit and 16-bit bayer formats to ipu_cpmem_set_image.
- Set the base address in ipu_cpmem_set_image even for invalid formats
to increase robustness against errors.
- Use drm_plane_helper_check_state in plane atomic_check.
- Some cleanup.
* tag 'imx-drm-next-2017-03-17' of git://git.pengutronix.de/git/pza/linux: (22 commits)
drm/imx: Remove unneeded definition for structure imx_drm_component
drm/imx: use PRG/PRE when possible
drm/imx: enable/disable PRG on CRTC enable/disable
gpu: ipu-v3: only set non-zero AXI ID for IC when PRG is absent
gpu: ipu-v3: hook up PRG unit
gpu: ipu-v3: document valid IPUv3 compatibles and extend for i.MX6 QuadPlus
gpu: ipu-v3: add driver for Prefetch Resolve Gasket
gpu: ipu-v3: add DT binding for the Prefetch Resolve Gasket
gpu: ipu-v3: add driver for Prefetch Resolve Engine
gpu: ipu-v3: add DT binding for the Prefetch Resolve Engine
drm/imx: ipuv3-plane: add support for separate alpha planes
drm/imx: extend drm_plane_state_to_eba for separate channel support
gpu: ipu-v3: add support for separate alpha channels
drm: add RGB formats with separate alpha plane
drm/imx: add deferred plane disabling
drm/imx: don't wait for vblank and stop calling cleanup_planes in commit_tail
gpu: ipu-v3: add unsynchronised DP channel disabling
gpu: ipu-v3: remove IRQ dance on DC channel disable
gpu: ipu-cpmem: add bayer formats to ipu_cpmem_set_image
gpu: ipu-cpmem: set image base address even for incorrect formats
...
Linus Torvalds [Mon, 20 Mar 2017 02:09:39 +0000 (19:09 -0700)]
Linux 4.11-rc3
Linus Torvalds [Mon, 20 Mar 2017 02:00:47 +0000 (19:00 -0700)]
mm/swap: don't BUG_ON() due to uninitialized swap slot cache
This BUG_ON() triggered for me once at shutdown, and I don't see a
reason for the check. The code correctly checks whether the swap slot
cache is usable or not, so an uninitialized swap slot cache is not
actually problematic afaik.
I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since
I'm not sure why that seemingly pointless check was there. I suspect
the real fix is to just remove it entirely, but for now we'll warn about
it but not bring the machine down.
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 20 Mar 2017 01:49:28 +0000 (18:49 -0700)]
Merge tag 'powerpc-4.11-5' of git://git./linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
"A couple of minor powerpc fixes for 4.11:
- wire up statx() syscall
- don't print a warning on memory hotplug when HPT resizing isn't
available
Thanks to: David Gibson, Chandan Rajendra"
* tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Don't give a warning when HPT resizing isn't available
powerpc: Wire up statx() syscall
Linus Torvalds [Mon, 20 Mar 2017 01:11:13 +0000 (18:11 -0700)]
Merge branch 'parisc-4.11-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Mikulas Patocka added support for R_PARISC_SECREL32 relocations in
modules with CONFIG_MODVERSIONS.
- Dave Anglin optimized the cache flushing for vmap ranges.
- Arvind Yadav provided a fix for a potential NULL pointer dereference
in the parisc perf code (and some code cleanups).
- I wired up the new statx system call, fixed some compiler warnings
with the access_ok() macro and fixed shutdown code to really halt a
system at shutdown instead of crashing & rebooting.
* 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix system shutdown halt
parisc: perf: Fix potential NULL pointer dereference
parisc: Avoid compiler warnings with access_ok()
parisc: Wire up statx system call
parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range
parisc: support R_PARISC_SECREL32 relocation in modules
Linus Torvalds [Mon, 20 Mar 2017 01:06:31 +0000 (18:06 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"The bulk of the changes are in qla2xxx target driver code to address
various issues found during Cavium/QLogic's internal testing (stable
CC's included), along with a few other stability and smaller
miscellaneous improvements.
There are also a couple of different patch sets from Mike Christie,
which have been a result of his work to use target-core ALUA logic
together with tcm-user backend driver.
Finally, a patch to address some long standing issues with
pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices,
which will make folks using physical (or virtual) magnetic tape happy"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
qla2xxx: Update driver version to 9.00.00.00-k
qla2xxx: Fix delayed response to command for loop mode/direct connect.
qla2xxx: Change scsi host lookup method.
qla2xxx: Add DebugFS node to display Port Database
qla2xxx: Use IOCB interface to submit non-critical MBX.
qla2xxx: Add async new target notification
qla2xxx: Export DIF stats via debugfs
qla2xxx: Improve T10-DIF/PI handling in driver.
qla2xxx: Allow relogin to proceed if remote login did not finish
qla2xxx: Fix sess_lock & hardware_lock lock order problem.
qla2xxx: Fix inadequate lock protection for ABTS.
qla2xxx: Fix request queue corruption.
qla2xxx: Fix memory leak for abts processing
qla2xxx: Allow vref count to timeout on vport delete.
tcmu: Convert cmd_time_out into backend device attribute
tcmu: make cmd timeout configurable
tcmu: add helper to check if dev was configured
target: fix race during implicit transition work flushes
target: allow userspace to set state to transitioning
target: fix ALUA transition timeout handling
...
Linus Torvalds [Sun, 19 Mar 2017 22:45:02 +0000 (15:45 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull device-dax fixes from Dan Williams:
"The device-dax driver was not being careful to handle falling back to
smaller fault-granularity sizes.
The driver already fails fault attempts that are smaller than the
device's alignment, but it also needs to handle the cases where a
larger page mapping could be established. For simplicity of the
immediate fix the implementation just signals VM_FAULT_FALLBACK until
fault-size == device-alignment.
One fix is for -stable to address pmd-to-pte fallback from the
original implementation, another fix is for the new (introduced in
4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the
ride.
These have received a build success notification from the kbuild
robot"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: fix debug output typo
device-dax: fix pud fault fallback handling
device-dax: fix pmd/pte fault fallback handling
Himanshu Madhani [Wed, 15 Mar 2017 16:48:56 +0000 (09:48 -0700)]
qla2xxx: Update driver version to 9.00.00.00-k
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:55 +0000 (09:48 -0700)]
qla2xxx: Fix delayed response to command for loop mode/direct connect.
Current driver wait for FW to be in the ready state before
processing in-coming commands. For Arbitrated Loop or
Point-to- Point (not switch), FW Ready state can take a while.
FW will transition to ready state after all Nports have been
logged in. In the mean time, certain initiators have completed
the login and starts IO. Driver needs to start processing all
queues if FW is already started.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:54 +0000 (09:48 -0700)]
qla2xxx: Change scsi host lookup method.
For target mode, when new scsi command arrive, driver first performs
a look up of the SCSI Host. The current look up method is based on
the ALPA portion of the NPort ID. For Cisco switch, the ALPA can
not be used as the index. Instead, the new search method is based
on the full value of the Nport_ID via btree lib.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Himanshu Madhani [Wed, 15 Mar 2017 16:48:53 +0000 (09:48 -0700)]
qla2xxx: Add DebugFS node to display Port Database
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:52 +0000 (09:48 -0700)]
qla2xxx: Use IOCB interface to submit non-critical MBX.
The Mailbox interface is currently over subscribed. We like
to reserve the Mailbox interface for the chip managment and
link initialization. Any non essential Mailbox command will
be routed through the IOCB interface. The IOCB interface is
able to absorb more commands.
Following commands are being routed through IOCB interface
- Get ID List (007Ch)
- Get Port DB (0064h)
- Get Link Priv Stats (006Dh)
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:51 +0000 (09:48 -0700)]
qla2xxx: Add async new target notification
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Anil Gurumurthy [Wed, 15 Mar 2017 16:48:50 +0000 (09:48 -0700)]
qla2xxx: Export DIF stats via debugfs
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:49 +0000 (09:48 -0700)]
qla2xxx: Improve T10-DIF/PI handling in driver.
Add routines to support T10 DIF tag.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:48 +0000 (09:48 -0700)]
qla2xxx: Allow relogin to proceed if remote login did not finish
If the remote port have started the login process, then the
PLOGI and PRLI should be back to back. Driver will allow
the remote port to complete the process. For the case where
the remote port decide to back off from sending PRLI, this
local port sets an expiration timer for the PRLI. Once the
expiration time passes, the relogin retry logic is allowed
to go through and perform login with the remote port.
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:47 +0000 (09:48 -0700)]
qla2xxx: Fix sess_lock & hardware_lock lock order problem.
The main lock that needs to be held for CMD or TMR submission
to upper layer is the sess_lock. The sess_lock is used to
serialize cmd submission and session deletion. The addition
of hardware_lock being held is not necessary. This patch removes
hardware_lock dependency from CMD/TMR submission.
Use hardware_lock only for error response in this case.
Path1
CPU0 CPU1
---- ----
lock(&(&ha->tgt.sess_lock)->rlock);
lock(&(&ha->hardware_lock)->rlock);
lock(&(&ha->tgt.sess_lock)->rlock);
lock(&(&ha->hardware_lock)->rlock);
Path2/deadlock
*** DEADLOCK ***
Call Trace:
dump_stack+0x85/0xc2
print_circular_bug+0x1e3/0x250
__lock_acquire+0x1425/0x1620
lock_acquire+0xbf/0x210
_raw_spin_lock_irqsave+0x53/0x70
qlt_sess_work_fn+0x21d/0x480 [qla2xxx]
process_one_work+0x1f4/0x6e0
Cc: <stable@vger.kernel.org>
Cc: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reported-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:46 +0000 (09:48 -0700)]
qla2xxx: Fix inadequate lock protection for ABTS.
Normally, ABTS is sent to Target Core as Task MGMT command.
In the case of error, qla2xxx needs to send response, hardware_lock
is required to prevent request queue corruption.
Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:45 +0000 (09:48 -0700)]
qla2xxx: Fix request queue corruption.
When FW notify driver or driver detects low FW resource,
driver tries to send out Busy SCSI Status to tell Initiator
side to back off. During the send process, the lock was not held.
Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Quinn Tran [Wed, 15 Mar 2017 16:48:44 +0000 (09:48 -0700)]
qla2xxx: Fix memory leak for abts processing
Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Joe Carnuccio [Wed, 15 Mar 2017 16:48:43 +0000 (09:48 -0700)]
qla2xxx: Allow vref count to timeout on vport delete.
Cc: <stable@vger.kernel.org>
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Sat, 18 Mar 2017 22:04:13 +0000 (15:04 -0700)]
tcmu: Convert cmd_time_out into backend device attribute
Instead of putting cmd_time_out under ../target/core/user_0/foo/control,
which has historically been used by parameters needed for initial
backend device configuration, go ahead and move cmd_time_out into
a backend device attribute.
In order to do this, tcmu_module_init() has been updated to create
a local struct configfs_attribute **tcmu_attrs, that is based upon
the existing passthrough_attrib_attrs along with the new cmd_time_out
attribute. Once **tcm_attrs has been setup, go ahead and point
it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core.
Also following MNC's previous change, ->cmd_time_out is stored in
milliseconds but exposed via configfs in seconds. Also, note this
patch restricts the modification of ->cmd_time_out to before +
after the TCMU device has been configured, but not while it has
active fabric exports.
Cc: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 9 Mar 2017 08:42:09 +0000 (02:42 -0600)]
tcmu: make cmd timeout configurable
A single daemon could implement multiple types of devices
using multuple types of real devices that may not support
restarting from crashes and/or handling tcmu timeouts. This
makes the cmd timeout configurable, so handlers that do not
support it can turn if off for now.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>