OSDN Git Service
Marcel Holtmann [Sat, 5 Jul 2014 08:48:01 +0000 (10:48 +0200)]
Bluetooth: Use a more simpler style for HCI event callbacks
The HCI event callbacks have grown over the last years and some
functions handle status checking different than others. For the
simple ones, check the status at the beginning and exit if an
error with the HCI command occured.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Fri, 4 Jul 2014 17:06:23 +0000 (19:06 +0200)]
Bluetooth: Add support for New Configuration Options management event
When one or more of the missing configuration options change, then send
this even to all the other management interface clients.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Fri, 4 Jul 2014 17:06:22 +0000 (19:06 +0200)]
Bluetooth: Move mgmt_event helper function to different location
Move the mgmt_event function higher up in the code so that no forward
declaration is needed.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Fri, 4 Jul 2014 16:11:55 +0000 (18:11 +0200)]
Bluetooth: Add support for Set External Configuration management command
The Set External Configuration management command allows for switching
between configured and unconfigured start if HCI_QURIK_EXTERNAL_CONFIG
is set by the transport driver.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Fri, 4 Jul 2014 15:23:35 +0000 (17:23 +0200)]
Bluetooth: Support HCI_QUIRK_EXTERNAL_CONFIG for hci_vhci driver
This adds support for configuring the hci_vhci virtual controllers
to require a setup stage using HCI_QUIRK_EXTERNAL_CONFIG. With this
option the virtual controller will start out as unconfigured.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Fri, 4 Jul 2014 15:23:34 +0000 (17:23 +0200)]
Bluetooth: Fix quirks that are valid during setup driver callback
For the quirks that are allow to be set during setup callback, the
check needs to be modified so that they are applied even if no
setup callback provided by the driver.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Fri, 4 Jul 2014 15:23:33 +0000 (17:23 +0200)]
Bluetooth: Add quirk for external configuration requirement
When a controller requires external configuration, then setting this
quirk will allow indicating this.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Fri, 4 Jul 2014 14:54:40 +0000 (16:54 +0200)]
Bluetooth: Allow reading configuration info when unconfigured
Reading the controller configuration information is a valid management
command when the controller is unconfigured. Allow this command, but
return invalid index on all other commands.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Fri, 4 Jul 2014 14:54:39 +0000 (16:54 +0200)]
Bluetooth: Set HCI_QUIRK_INVALID_BADDR for BCM20702A0 default address
When the Broadcom USB controller has a default address, then set the quirk
so the Bluetooth core knows that controller configuration is required.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Fri, 4 Jul 2014 14:54:38 +0000 (16:54 +0200)]
Bluetooth: Set HCI_QUIRK_INVALID_BADDR for Intel USB default address
When the Intel USB controller has a default address, then set the quirk
so the Bluetooth core knows that controller configuration is required.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Fri, 4 Jul 2014 14:54:37 +0000 (16:54 +0200)]
Bluetooth: Add quirk for invalid controller address setting
When a Bluetooth controller does not have a valid public Bluetooth
address, then allow the driver to indicate this. If the quirk is
set, the Bluetooth core will switch to unconfigured state first
and will allow userspace to configure the address before starting
the full initialization of the controller.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Fri, 4 Jul 2014 14:08:02 +0000 (16:08 +0200)]
Bluetooth: Document the existing device quirks
The current existing device quirks are not documented. So instead of
spreading bits and pieces somewhere in the code, add proper comments
on where these quirks can be used and what behavior they change.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg [Fri, 4 Jul 2014 13:17:23 +0000 (16:17 +0300)]
Bluetooth: Use list_del when freeing the list entry
It's wasteful to use list_del_init (which re-initializes the list_head)
if we're just about to free the element and never use it again.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 13:15:49 +0000 (16:15 +0300)]
Bluetooth: Don't take actions on blocked devices when scanning
If a found device is marked as blocked while doing passive LE scanning,
neither report it nor try to connect to it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Marcel Holtmann [Fri, 4 Jul 2014 11:23:38 +0000 (13:23 +0200)]
Bluetooth: Fix constant for public address configuration
The public address configuration option is value 0x02 since the generic
external configuration is value 0x01. So adjust this accordingly and
also add the value 0x01 to the list.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg [Fri, 4 Jul 2014 09:37:27 +0000 (12:37 +0300)]
Bluetooth: Use hci_pend_le_action_lookup to look up report entries
Instead of looking through the entire list of entries we can more
efficiently use the new hci_pend_le_action_lookup() function to look up
entries specifically in the pend_le_reports list. Since the search is
now limited to the right list we can also remove an unnecessary check
for list_empty() before the lookup.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 09:37:26 +0000 (12:37 +0300)]
Bluetooth: Make hci_pend_le_conn_lookup more general purposed
In some circumstances we need to look up entries in pend_le_conns and in
other in pend_le_reports. This patch converts the existing lookup
function for pend_le_conns to something that can be used for both lists.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 09:37:25 +0000 (12:37 +0300)]
Bluetooth: Remove unused hci_pend_le_conn_add function
Since there are no more users of this function we can simply go ahead
and remove it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 09:37:24 +0000 (12:37 +0300)]
Bluetooth: Remove unnecessary usage of hci_pend_le_conn_add
This is the last place using hci_pend_le_conn_add() and we can more
just as simply manipulate the list directly here.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 09:37:23 +0000 (12:37 +0300)]
Bluetooth: Fix clearing and restarting all LE actions on power cycle
When powering off (hci_dev_do_close) we should clear both the
pend_le_reports and pend_le_conns types of entries. When powering on
respectively we should populate both lists. This patch converts the
hci_pend_le_conns_clear() function into hci_pend_le_actions_clear()
(which can now be static) and converts the restart_le_auto_conns()
function into restart_le_actions().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 09:37:22 +0000 (12:37 +0300)]
Bluetooth: Remove unused hci_pend_le_conn_del() function
Now that there are no-longer any users of the hci_pend_le_conn_del()
function we can simply go ahead and remove it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 09:37:21 +0000 (12:37 +0300)]
Bluetooth: Simplify hci_conn_params->action list usage
Since params->action is used for both the pend_le_conns and
pend_le_reports lists we can simplify the adding and deleting of the
lists considerably. For example, when deleting entries in most
situations we no-longer need to check the auto_connect value but can
directly proceed with calling list_del_init on param->action (which is
safe even if the entry is not part of any list).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 09:37:20 +0000 (12:37 +0300)]
Bluetooth: Don't bother doing anything if auto_connect doesn't change
When hci_conn_params_set() is called if the new auto_connect value is
the same as the old one we don't need to take any action. Simply return
success from the function in this case.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 09:37:19 +0000 (12:37 +0300)]
Bluetooth: Simplify use of hci_pend_le_conns_clear()
Now that pend_le_connections is a list of hci_conn_params entries we can
simply remove items from that list as we iterate through the global list
of le_conn_params. This also moves the responsibility of calling
hci_update_background_scan() to the functions that were previously
calling hci_pend_le_conns_clear(). The only user that's left for
hci_pend_le_conns_clear() is hci_dev_do_close() which anyway does not
need to call hci_update_background_scan().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 09:37:18 +0000 (12:37 +0300)]
Bluetooth: Convert pend_le_reports into a list
To simplify manipulation and lookup of hci_conn_params entries of the
type HCI_AUTO_CONN_REPORT it makes sense to store them in their own
list. The new action list_head in hci_conn_params is used for this
purpose.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 09:37:17 +0000 (12:37 +0300)]
Bluetooth: Convert pend_le_conn list to a generic action list
In preparation to store also HCI_AUTO_CONN_REPORT entries in a list it
makes sense to convert the existing pend_le_conn list head of
hci_conn_params into a more generically named "action". This makes sense
because a parameter entry will never participate in more than one action
list.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Fri, 4 Jul 2014 09:37:16 +0000 (12:37 +0300)]
Bluetooth: Fix missing return statement in process_adv_report
If we're doing passive scanning we shouldn't proceed with any of the
code that deals with active scanning (pending reports, etc.). This patch
fixes a missing return statement for the passive scanning section in the
process_adv_report() function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Marcel Holtmann [Thu, 3 Jul 2014 22:46:56 +0000 (00:46 +0200)]
Bluetooth: Add support for controller configuration info command
The Read Controller Configuration Information command allows retrieving
details about possible configurations option. The supported options are
returned and also the missing options (if any).
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg [Thu, 3 Jul 2014 16:33:51 +0000 (19:33 +0300)]
Bluetooth: Add identity address check in param lookup functions
Since we only store entries with identity addresses in the
le_conn_params and pend_le_conns lists we can avoid unnecessary lookups
by checking for an identity address before diving into the lists
themselves.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Thu, 3 Jul 2014 16:33:50 +0000 (19:33 +0300)]
Bluetooth: Remove unnecessary checks for auto-connected devices
If a device is in the pend_le_conns list it cannot at the same time also
have the need to be notified through mgmt_device_found. By making
check_pending_le_conn return whether it found an entry or not we can
avoid unnecessary checks in process_adv_report().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Thu, 3 Jul 2014 16:33:49 +0000 (19:33 +0300)]
Bluetooth: Use hci_conn_params in pend_le_conns
Since the connection parameters are always a basis for adding entries to
hdev->pend_le_conns (so far of type bdaddr_list) it's simpler and more
efficient to have the parameters themselves be the entries in the
pend_le_conns list. We do this by adding another list_head to the
hci_conn_params struct.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Thu, 3 Jul 2014 16:33:48 +0000 (19:33 +0300)]
Bluetooth: Remove redundant IRK lookup
When processing passive scanning results we need the resolved identity
address both in check_pending_le_conn() as well as later in
process_adv_report(). Since process_adv_report() calls
check_pending_le_conn() we can simply resolve the IRK earlier in the
function and thereby eliminate a second lookup.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Thu, 3 Jul 2014 16:33:47 +0000 (19:33 +0300)]
Bluetooth: Fix missing update of pend_le_reports
When calling Remove Device for an entry using HCI_AUTO_CONN_REPORT we
need to decrement the pend_le_reports value correspondingly. This patch
fixes one such missing action in the Remove Device command handler.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Thu, 3 Jul 2014 10:52:27 +0000 (13:52 +0300)]
Bluetooth: Fix buffer overflow with variable length commands
The handler for variable length commands were trying to calculate the
expected length of the command based on the given parameter count, and
then comparing that with the received data. However, the expected count
was stored in a u16 which can easily overflow. With a carefully crafted
command this can then be made to match the given data even though the
parameter count is actually way too big, resulting in a buffer overflow
when parsing the parameters.
This patch fixes the issue by calculating a per-command maximum
parameter count and returns INVALID_PARAMS if it is exceeded.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 20:09:24 +0000 (23:09 +0300)]
Bluetooth: Support scanning for devices using RPA
When we're scanning for specific devices that use an RPA we need to
convert the RPA to the identity address before looking up the entry in
the connection parameters. This patch adds the necessary code to do this
in the process_adv_report() function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 19:42:02 +0000 (22:42 +0300)]
Bluetooth: Add support for background LE scanning
If we have one or more devices with HCI_AUTO_CONN_REPORT we should do
background scanning and emit mgmt_device_found events. This patch
modifies the hci_update_background_scan() function to extend the
conditions needed to trigger scanning, and adds the necessary code to
process_adv_report() to emit mgmt_device_found events.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 19:42:01 +0000 (22:42 +0300)]
Bluetooth: Allow mgmt_device_found events for kernel-side scanning
When the kernel is doing LE scanning because of one or more devices
added with action 0x00 through the Add Device command we do want to let
mgmt_device_found() to proceed with sending an event. This kind of
devices are tracked with hdev->pend_le_reports, so check this value
before bailing out from the function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 19:42:00 +0000 (22:42 +0300)]
Bluetooth: Track number of added devices with HCI_AUTO_CONN_REPORT
To be able to make the right choice of whether to start passive scanning
or to send out a mgmt_device_found event we need to know if there are
any devices in the le_conn_params list with the auto_connect value set
to HCI_AUTO_CONN_REPORT. This patch adds a counter for this kind of
devices.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Marcel Holtmann [Wed, 2 Jul 2014 23:35:10 +0000 (01:35 +0200)]
Bluetooth: Support HCI_QUIRK_RAW_DEVICE for hci_vhci driver
This adds support for configuring the hci_vhci virtual controllers
as a raw-only device using HCI_QUIRK_RAW_DEVICE. This is useful for
testing the kernel internal infrastructure.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Wed, 2 Jul 2014 20:10:52 +0000 (22:10 +0200)]
Bluetooth: Add support for Read Unconfigured Index List command
This command allows to get the list of currently known controller that
are in unconfigured state.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Wed, 2 Jul 2014 19:30:55 +0000 (21:30 +0200)]
Bluetooth: Add support for Unconfigured Index Removed events
When a controller in an unconfigured state gets removed, then send
Unconfigured Index Removed events.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Wed, 2 Jul 2014 19:30:54 +0000 (21:30 +0200)]
Bluetooth: Add support for Unconfigured Index Added events
When a controller is in unconfigured state it is currently hidden
from the management interface. This change now announces the new
controller with an Unconfigured Index Added event and allows clients
to easily detect the controller.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Wed, 2 Jul 2014 17:10:33 +0000 (19:10 +0200)]
Bluetooth: Introduce unconfigured controller state
With the new unconfigured controller state it is possible to provide a
fully functional HCI transport, but disable the higher level operations
that would normally happen. This way userspace can try to configure the
controller before releases the unconfigured state.
The internal state is represented by HCI_UNCONFIGURED. This replaces the
HCI_QUIRK_RAW_DEVICE quirk as internal state representation. This is now
a real state and drivers can use the quirk to actually trigger this
state. In the future this will allow a more fine grained switching from
unconfigured state to configured state for controller inititialization.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg [Wed, 2 Jul 2014 14:37:34 +0000 (17:37 +0300)]
Bluetooth: Don't send connection parameters without identity address
If we don't have an identity address for connection parameters it
doesn't really make sense to send them to user space. Instead just
ignore them for now. Later we can add support for sending them when we
eventually get the identity through pairing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 14:37:33 +0000 (17:37 +0300)]
Bluetooth: Make is_identity_address a global function
There are more places that can take advantage of is_identity_address()
besides hci_core.c. This patch moves the function to hci_core.h and
gives it the appropriate hci_ prefix.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 14:37:32 +0000 (17:37 +0300)]
Bluetooth: Pass store hint to mgmt_new_conn_param
The calling functions of mgmt_new_conn_param have more information about
the parameters, such as whether the kernel is tracking them or not. It
makes therefore sense to have them pass an initial store_hint value to
the mgmt_new_conn_param function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 14:37:31 +0000 (17:37 +0300)]
Bluetooth: Make hci_le_conn_update return the store hint
The caller of hci_le_conn_update is directly interested in knowing what
the best value is for the store_hint parameter of the corresponding
mgmt event. Since hci_le_conn_update knows whether there were stored
parameters that were updated or not we can have it return an initial
store_hint value to the caller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 14:37:30 +0000 (17:37 +0300)]
Bluetooth: Fix missing update of conn params
We should update any stored connection parameters when we receive the LE
Remote Connection Parameter Request HCI event. This patch adds the
necessary code to the function that handles the event.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 14:37:29 +0000 (17:37 +0300)]
Bluetooth: Add Load Connection Parameters command
This patch implements the new Load Connection Parameters mgmt command
that's intended to load the desired connection parameters for LE
devices.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 14:37:28 +0000 (17:37 +0300)]
Bluetooth: Remove only enabled entries with Remove Device command
The Remove Device mgmt command is supposed to undo what the Add Device
command does. An entry added by Add Device cannot have the
HCI_AUTO_CONN_DISABLED auto_connect value, so we should treat this as an
invalid entry to remove. This patch adds the necessary pieces to the
Remove Device command handler so that it only removes entries which were
added by Add Device.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 14:37:27 +0000 (17:37 +0300)]
Bluetooth: Add new auto_conn value matching mgmt action 0x00
The 0x00 action value of mgmt means "scan and report" but do not
connect. This is different from HCI_AUTO_CONN_DISABLED so we need a new
value for it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 14:37:26 +0000 (17:37 +0300)]
Bluetooth: Add specific connection parameter clear functions
In some circumstances we'll need to either clear only the enabled
parameters or only the disabled ones. This patch adds convenience
functions for this purpose.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 14:37:25 +0000 (17:37 +0300)]
Bluetooth: Rename hci_conn_params_clear to hci_conn_params_clear_all
We'll soon have specific clear functions for clearing enabled or
disabled entries, so rename the function that removes everything to
clear_all().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 13:45:39 +0000 (16:45 +0300)]
Bluetooth: Fix sparse warning with btmrvl driver
This patch fixes the following sparse warning caused by a missing
declaration in the header file:
drivers/bluetooth/btmrvl_main.c:218:5: warning: symbol 'btmrvl_pscan_window_reporting' was not declared. Should it be static?
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Marcel Holtmann [Wed, 2 Jul 2014 10:38:22 +0000 (12:38 +0200)]
Bluetooth: Check for default address of Broadcom BCM20702A0 controllers
The Broadcom BCM20702A0 USB controllers might come with the default
address 00:20:70:02:A0:00 when booting up. If this happens, then warn
about such address being used.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Wed, 2 Jul 2014 10:06:45 +0000 (12:06 +0200)]
Bluetooth: Check for default address of Intel USB controllers
Some Intel Bluetooth controllers come with a default address. If this
address is found, print an error to warn the user about it.
The controller is fully operational, but the danger of duplicate
Bluetooth addresses might causes issues. At least with a clear
error it becomes easier to debug these cases.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Wed, 2 Jul 2014 09:30:51 +0000 (11:30 +0200)]
Bluetooth: Default to internal use manufacturer identifier
When allocating a new controller structure, then default to the internal
use value 0xffff first. Default to 0x0000 is a bad idea since that is
the manufacturer identifier of Ericsson Technology Licensing.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Wed, 2 Jul 2014 09:25:25 +0000 (11:25 +0200)]
Bluetooth: Add public address configration for Intel USB devices
For the Intel based USB devices add support for configuration of
the public device address.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg [Wed, 2 Jul 2014 06:36:22 +0000 (09:36 +0300)]
Bluetooth: Drop LE connections for blocked devices
Unlike BR/EDR we cannot reject LE connections of blocked devices but
have to do it as soon as we get a LE Connection Complete event. The
patch adds a blacklist check to the hci_le_conn_complete_evt function
and drops all connections for blocked devices.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Wed, 2 Jul 2014 06:36:21 +0000 (09:36 +0300)]
Bluetooth: Centralize looking up blocked devices to l2cap_recv_frame
The ATT channel isn't the only one that we should ensure doesn't receive
data from blocked devices. SMP is another, and in general we don't want
data packets going to any of the various handlers. Therefore, add a
single check to the l2cap_recv_frame function.
The patch fixes at the same time the use of a correct address type. The
blacklist stores the values with the user space facing triple type
wheras hci_conn->dst_type uses the HCI address type (0x00 or 0x01).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Marcel Holtmann [Tue, 1 Jul 2014 22:53:48 +0000 (00:53 +0200)]
Bluetooth: Add public address configration for Broadcom USB devices
For the Broadcom based USB devices add support for configuration of
the public device address.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Tue, 1 Jul 2014 22:53:47 +0000 (00:53 +0200)]
Bluetooth: Add support for hdev->set_bdaddr callback handling
Some embedded controllers allow the programming of a public address
and this adds vendor support for supporting OEM confguration of such
addresses.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Andre Guedes [Tue, 1 Jul 2014 21:10:11 +0000 (18:10 -0300)]
Bluetooth: Introduce "New Connection Parameter" Event
This patch introduces a new Mgmt event called "New Connection Parameter".
This event indicates to userspace the connection parameters values the
remote device requested.
The user may store these values and load them into kernel. This way, next
time a connection is established to that device, the kernel will use those
parameters values instead of the default ones.
This event is sent when the remote device requests new connection
parameters through connection parameter update procedure. This event is
not sent for slave connections.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andre Guedes [Tue, 1 Jul 2014 21:10:10 +0000 (18:10 -0300)]
Bluetooth: Enable new LE meta event
The Bluetooth 4.1 introduces a new LE meta event called "LE Remote
Connection Parameter Request" event. In order to the controller
sends this event to host, we should enable it during controller
initialization.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andre Guedes [Tue, 1 Jul 2014 21:10:09 +0000 (18:10 -0300)]
Bluetooth: Move LE event mask setting into init3 phase
During init2 phase, the LE local features have not be read yet so
we aren't able to rely on hdev->le_features to determine if the
controller supports the Connection Parameters Request Procedure.
For that reason, this patch moves LE event mask setting from init2
into init3 initialization phase.
The hdev->le_features mask will be checked by the next patch in order
to know if "LE Remote Connection Parameter Request Event" should be
enabled.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andre Guedes [Tue, 1 Jul 2014 21:10:08 +0000 (18:10 -0300)]
Bluetooth: Connection Parameter Update Procedure
This patch adds support for LE Connection Parameters Request Link
Layer control procedure introduced in Core spec 4.1. This procedure
allows a Peripheral or Central to update the Link Layer connection
parameters of an established connection.
Regarding the acceptance of connection parameters, the LL procedure
follows the same approach of L2CAP procedure (see l2cap_conn_param_
update_req function). We accept any connection parameters values as
long as they are within the valid range.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Chin-Ran Lo [Tue, 1 Jul 2014 21:00:14 +0000 (14:00 -0700)]
Bluetooth: btmrvl: wait for HOST_SLEEP_ENABLE event in suspend
After BT_CMD_HOST_SLEEP_ENABLE command finishes, driver should
wait until getting BT_EVENT_HOST_SLEEP_ENABLE event to complete
suspend procedure.
Without this patch the suspend handler would return success
earlier. By the time when the BT_EVENT_HOST_SLEEP_ENABLE event
comes in the controller driver could have already turned off the
bus clock. This causes kernel crash or system reboot eventually.
Cc: <stable@vger.kernel.org> # 3.13+
Signed-off-by: Chin-Ran Lo <crlo@marvell.com>
Signed-off-by: Jeff CF Chen <jeffc@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Bing Zhao [Mon, 31 Mar 2014 21:41:44 +0000 (14:41 -0700)]
Bluetooth: btmrvl: indicate pscan scheduling instant in a debug event
A vendor specific command is sent to firmware during
initialization to enable this feature. This command is for
SD8897 only.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Tue, 1 Jul 2014 19:09:47 +0000 (22:09 +0300)]
Bluetooth: Fix redundant device (un)blocked events
For the Block/Unblock Device mgmt commands we should only emit the
Blocked/Unblocked events on any socket except for the one which received
the command. The code was previously incorrectly trying to look up a
non-existent pending command and thereby ending up not skipping the
command socket for the event.
We can simplify the code a lot by simply sending the event directly from
the command handler functions. We have the reference to the command
socket available there which makes it easy to pass to the mgmt_event
function for skipping.
The only notable side-effect of this is that the old blacklisting
ioctl's no-longer cause mgmt events to be emitted, however as user space
versions using these ioctl's are not mgmt-aware this is acceptable.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Marcel Holtmann [Tue, 1 Jul 2014 17:28:24 +0000 (19:28 +0200)]
Bluetooth: Ensure that background scanning gets enabled on power on
The background scanning normally gets enabled during power on by
adding devices to the pending connection list. However devices
might be already on that list and the list of devices is empty,
then it is better to trigger the background manually.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Tue, 1 Jul 2014 17:28:23 +0000 (19:28 +0200)]
Bluetooth: Do not trigger background scanning when HCI_AUTO_OFF is set
When a new controller is initialized, but not powered from userspace
at the moment, the HCI_AUTO_OFF flag is still set. During this period,
userspace might program device for auto-connection, but never power
on the controller. In this case do not try to start background
scanning and leave it for later to be started.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg [Tue, 1 Jul 2014 16:14:13 +0000 (19:14 +0300)]
Bluetooth: Allow re-encryption with LTK when STK is in use
If we're encrypted with the STK we should allow re-encryption with an
LTK even though the achieved security level is the same. This patch adds
the necessary logic to the smp_sufficient_security function which is
used to determine whether to proceed with encryption or not.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Tue, 1 Jul 2014 16:14:12 +0000 (19:14 +0300)]
Bluetooth: Add flag to track STK encryption
There are certain subtle differences in behavior when we're encrypted
with the STK, such as allowing re-encryption even though the security
level stays the same. Because of this, add a flag to track whether we're
encrypted with an STK or not.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Tue, 1 Jul 2014 15:40:20 +0000 (18:40 +0300)]
Bluetooth: Fix redundant encryption when receiving Security Request
If we're already encrypted with a good enough LTK we should just ignore
an incoming SMP Security Request. The code was already taking care of
this in the smp_conn_security function before calling smp_ltk_encrypt
but failed to do the same in smp_cmd_security_req. This patch fixes the
issue by moving up the smp_sufficient_security function and using it in
the Security Request handler before trying to request encryption.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Marcel Holtmann [Tue, 1 Jul 2014 12:11:21 +0000 (14:11 +0200)]
Bluetooth: Add support for Not Connectable flag for Device Found events
The Device Found events of the management interface should indicate if
it is possible to connect to a remote device or if it is broadcaster
only advertising. To allow this differentation the Not Connectable flag
is introduced that will be set when it is known that a device can not
be connected.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Tue, 1 Jul 2014 12:11:20 +0000 (14:11 +0200)]
Bluetooth: Provide flags parameter direct to mgmt_device_found
Providing the flags parameter directly to mgmt_device_found function
makes the core simpler and more readable. With this it becomes a lot
easier to add new flags in the future.
This also changes hci_inquiry_cache_update to just return that flags
needed for mgmt_device_found since that is its only use for the two
return parameters anyway.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Tue, 1 Jul 2014 12:11:19 +0000 (14:11 +0200)]
Bluetooth: Fix merge of advertising data and scan response data
The advertising data and scan response data are merged in the wrong
order. It should be advertsing data first and then scan response data
and not the other way around.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Cc: stable@vger.kernel.org # 3.16
Marcel Holtmann [Tue, 1 Jul 2014 10:11:06 +0000 (12:11 +0200)]
Bluetooth: Remove connection interval parameters from hci_conn_params_set
The connection interval parameter of hci_conn_params_set are always used
with the controller defaults. So just let hci_conn_params_add set the
controller default and not bother resetting them to controller defaults
every time the hci_conn_params_set is called.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Tue, 1 Jul 2014 10:11:05 +0000 (12:11 +0200)]
Bluetooth: Use hci_conn_params_add within hci_conn_params_set
The hci_conn_params_add function provides the default allocation of
connection parameters. To avoid code duplication, use that code from
hci_conn_params_set to allocate or lookup parameter struct.
As a benefit the connection latency and supervision timeout parameters
are no longer reset to default when calling hci_conn_params_set.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Tue, 1 Jul 2014 10:11:04 +0000 (12:11 +0200)]
Bluetooth: Change hci_conn_params_add to return the parameter struct
When adding new connection parameters, it is useful to return either
the existing struct or the newly created one.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Tue, 1 Jul 2014 08:59:24 +0000 (10:59 +0200)]
Bluetooth: Use bool for smp_ltk_encrypt return value
The return value of smp_ltk_encrypt is simple boolean, so just use
bool and make the code a bit more readable.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Nick Pelly [Mon, 30 Jun 2014 05:55:01 +0000 (11:25 +0530)]
Bluetooth: Fallback to SCO on error code 0x10 (Connection Accept Timeout)
This is to support the Motorola HF850 carkit which reports the error
code 0x10 for an eSCO attempt, even though it advertises eSCO support.
With this patch we will retry with a SCO connection, which succeeds.
Signed-off-by: Nick Pelly <npelly@google.com>
Signed-off-by: Kiran Kumar Raparthy <kiran.kumar@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Johan Hedberg [Tue, 1 Jul 2014 09:07:23 +0000 (12:07 +0300)]
Bluetooth: Allow L2CAP getpeername() for BT_CONFIG state
We have all the necessary remote information for getpeername() when we
are in the BT_CONFIG state so this should be allowed. This is
particularly important for LE sockets where changing the security level
will temporarily move the socket into BT_CONFIG state.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Fabian Frederick [Mon, 30 Jun 2014 17:26:23 +0000 (19:26 +0200)]
Bluetooth: constify seq_operations
bt_seq_ops is only used with __seq_open_private as
const struct seq_operations *
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andre Guedes [Thu, 26 Jun 2014 00:52:52 +0000 (21:52 -0300)]
Bluetooth: Connection parameters check helper
This patch renames l2cap_check_conn_param() to hci_check_conn_params()
and moves it to hci_core.h so it can reused in others files. This helper
will be reused in the next patch.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Marcel Holtmann [Mon, 30 Jun 2014 14:04:12 +0000 (16:04 +0200)]
Bluetooth: Start background scanning only when controller is ready
When the controller is not active or in init/setup phase, do not
try to start or stop background scanning.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Mon, 30 Jun 2014 10:34:40 +0000 (12:34 +0200)]
Bluetooth: Add default connection parameters before pairing
When trying to pair a new Bluetooth Low Energy device, then make sure
that the default connections parameters are in place before trying to
establish the first connection to that device. With the connection
parameters structure allocated, the slave preferred values can now
easily be tracked and all future connections will use the correct
values from that start decreasing connection establishment time.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Mon, 30 Jun 2014 10:34:39 +0000 (12:34 +0200)]
Bluetooth: Provide function to create and set connection parameters
In some cases it is useful to not overwrite connection parametes and
instead just create default ones if they don't exist. This function
does exactly that. hci_conn_params_add will allow to create new
default connection parameters. hci_conn_params_set will set the
values and also create new parameters if they don't exist.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Mon, 30 Jun 2014 10:34:38 +0000 (12:34 +0200)]
Bluetooth: Expose default supervision timeout setting via debugfs
The controller has a default value for the supervision timeout. Expose
this via debugfs for testing purposes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Mon, 30 Jun 2014 10:34:37 +0000 (12:34 +0200)]
Bluetooth: Expose default connection latency setting via debugfs
The controller has a default value for the connection latency. Expose
this via debugfs for testing purposes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Mon, 30 Jun 2014 10:34:36 +0000 (12:34 +0200)]
Bluetooth: Provide defaults for LE connection latency and timeout
Store the connection latency and supervision timeout default values
with all the other controller defaults. And when needed use them
for new connections.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Sun, 29 Jun 2014 20:28:34 +0000 (22:28 +0200)]
Bluetooth: Add Device Added and Device Removed management events
When devices are added or removed, then make sure that events are send
out to all other clients so that the list of devices can be easily
tracked. This is especially important when external clients are
adding or removing devices within the auto-connection list.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Sun, 29 Jun 2014 14:15:49 +0000 (16:15 +0200)]
Bluetooth: Replace le_auto_conn debugfs with device_list entry
Since the auto-connection handling has gained offical management
command support, remove the le_auto_conn debugfs entry.
For debugging purposes replace it a simple device_list debugfs
entry that allows listing of the current internal auto-connection
list used for passive scanning.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Sun, 29 Jun 2014 17:44:03 +0000 (19:44 +0200)]
Bluetooth: Add support for Add/Remove Device management commands
This allows adding or removing devices from the background scanning
list the kernel maintains. Device flagged for auto-connection will
be automatically connected if they are found.
The passive scanning required for auto-connection will be started
and stopped on demand.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Sun, 29 Jun 2014 14:43:27 +0000 (16:43 +0200)]
Bluetooth: Use LE connection parameters if known
When the LE connection parameters for connection latency and
supervision timeout are known, then use then. If they are not
know fallback to defaults.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Sun, 29 Jun 2014 14:43:26 +0000 (16:43 +0200)]
Bluetooth: Store latency and supervision timeout in connection params
When the slave updates the connection parameters, store also the
connection latency and supervision timeout information in the
internal list of connection parameters for known devices.
Having these values available allowes the auto-connection
procedure to use the correct values from the beginning without
having to request an update on every connection establishment.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Sun, 29 Jun 2014 11:41:51 +0000 (13:41 +0200)]
Bluetooth: Update background scanning from hci_conn_params_clear
When calling hci_conn_params_clear function, it should update the
background scanning properly and not require a separate call to
update it.
For the case when the function is used during unregister of a
controller, an extra safe guard is but in place.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Sun, 29 Jun 2014 11:41:50 +0000 (13:41 +0200)]
Bluetooth: Clear pending connections from hci_conn_params_clear
When hci_conn_params_clear is called, it is always followed by a
call to hci_pend_le_conns_clear. So instead of making this explicit
just make sure it is always called. This makes this function similar
on how hci_conn_params_add and hci_conn_params_del work.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Sun, 29 Jun 2014 11:41:49 +0000 (13:41 +0200)]
Bluetooth: Move hci_pend_le_conn_* functions to different location
The hci_pend_le_conn_* function should be placed before their actual
users. So move them before hci_conn_params_* functions.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marcel Holtmann [Sun, 29 Jun 2014 10:20:15 +0000 (12:20 +0200)]
Bluetooth: Don't use non-resolvable private address for passive scanning
The usage of non-resovlable private addresses for passive scanning is
a bad idea. Passive scanning will not send any SCAN_REQ and thus using
your identity address for passive scanning is not a privacy issue.
It is important to use the identity address during passive scanning
since that is the only way devices using direct advertising will be
reported correctly by the controller. This is overlooked detail in
the Bluetooth specification that current controllers are not able
to report direct advertising events for other than their current
address.
When remote peers are using direct advertising and scanning is done
with non-resolvable private address these devices will not be found.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>