* ppc.h: Split out ppc64 definitions to..
* pcc64.h: ..here.  New file.
(R_PPC64_REL30): Rename from R_PPC64_ADDR30.

daily update

* elf32-ppc.c (ppc_elf_check_relocs): Don't set DF_TEXTREL for a
relocation against a non-allocated readonly section.

* configure.in (noconfigdirs): Don't skip gas on IRIX 6.
* configure: Rebuilt.

daily update

(node WIN32): Some clarifications and formatting fixups.

daily update

Change EM_MSP430 value to new, officially assigned number.

daily update

daily update

* read.c (get_absolute_expr): New, split out from..
(get_absolute_expression): ..here.
* read.h (get_absolute_expr): Declare.
* config/obj-elf.c (elf_common): Use offsetT for "temp" and "size".
Trim size to arch bits_per_address, and test for negative input
via get_absolute_expr.

daily update

* configure.in: Substitute TOPLEVEL_CONFIGURE_ARGUMENTS.
* Makefile.tpl: Pass TOPLEVEL_CONFIGURE_ARGUMENTS to gcc.
* Makefile.in: Regenerate.
* configure: Regenerate.

merge from gcc

daily update

* elf32-ppc.c (ppc_elf_relocate_section): Adjust addend for GOT16_HA.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.  PLTGOT16_HA too.

2003-01-09  Chris Demetriou  <cgd@broadcom.com>

        * ldmain.c (get_emulation): Sort -mipsNN checks in the usual
        order, and handle (ignore) -mips32r2.

* Makefile.tpl (BASE_FLAGS_TO_PASS): Also pass DESTDIR.
(install-info, dir.info): Prepend $(DESTDIR) to $(infodir).
* Makefile.in: Regenerate.

* configure.in: Remove Makefile in build, host and target modules
unless configure was run with --no-recursion.
* configure: Rebuilt.

* ldmain.c (main): Make sure ld_sysroot is initialized.

merge from gcc

2002-01-08  Klee Dienes  <kdienes@apple.com>

        * Makefile.am (ALL_MACHINES): Use cpu-msp430.lo, not cpu-msp430.c.
        (BFD32_BACKENDS): Use elf32-msp430.lo, not elf32-msp430.c.
        * Makefile.in: Regenerate.

2003-01-08  Klee Dienes  <kdienes@apple.com>

        * Makefile.am (ALL_MACHINES): Add msp430-dis.lo.
        * Makefile.in: Regenerate.

daily update

[ ChangeLog ]
2003-01-08  Chris Demetriou  <cgd@broadcom.com>

        * config.guess: Update to 2003-01-03 version.
        * config.sub: Update to 2003-01-03 version.

[ dejagnu/ChangeLog ]
2003-01-08  Chris Demetriou  <cgd@broadcom.com>

        * config.guess: Update to 2003-01-03 version.
        * config.sub: Update to 2003-01-03 version.

[ readline/ChangeLog.gdb ]
2003-01-08  Chris Demetriou  <cgd@broadcom.com>

        * config.guess: Update to 2003-01-03 version.
        * config.sub: Update to 2003-01-03 version.

* elfn32-mips.c (prev_reloc_section): New.
(GET_RELOC_ADDEND): Use it.  Parenthesize macro arguments.
(SET_RELOC_ADDEND): Parenthesize macro argument.

2003-01-07  Chris Demetriou  <cgd@broadcom.com>

        * mips.h: Fix missing space in comment.
        (INSN_ISA1, INSN_ISA2, INSN_ISA3, INSN_ISA4, INSN_ISA5)
        (INSN_ISA32, INSN_ISA32R2, INSN_ISA64): Shift values right
        by four bits.

* ppc-opc.c (powerpc_macros <extrwi>): Accept a shift of 32.

* elf32-hppa.c (final_link_relocate): For all DP relative relocations,
adjust addil instructions if the symbol has no section.

* configure: Regenerate with proper autoconf 2.13.

daily update

* configure.in: Add AC_PREREQ for consistency.
* configure: Regenerate.

* config/tc-xstormy16.c (md_cgen_lookup_reloc): Adjust value based
on operand type.
(xstormy16_md_apply_fix3): Use adjustment.

* gas/xstormy16/reloc-2.d: Adjust for fixed REL12 relocs.

* elf32-xstormy16.c (xstormy16_elf_howto_table): Make REL_12 not
partial_inplace.

* elf32-m68k.c (elf_m68k_check_relocs): Don't set DF_TEXTREL for
PC relative relocations.
(elf_m68k_discard_copies): Set it here instead.

daily update

2003-01-06  Andrew Cagney  <ac131313@redhat.com>

* configure.in (GDB_TK): Add tcl directories conditional on
gdb/gdbtk directory being present.
* configure: Regenerate.

* Makefile.am (eelf32iq10.c): Fix tab/whitespace mixup.

* Makefile.am (ldmain.o): Add @TARGET_SYSTEM_ROOT_DEFINE@.
(GENSCRIPTS): Add @use_sysroot@.
* Makefile.in: Regenerated.
* configure.host: Move setting of NATIVE_LIB_DIRS to...
* configure.tgt: ... here.  Use ${target} instead of ${host}
for NATIVE_LIB_DIRS.
* configure.in: Add --with-sysroot.
* configure: Regenerated.
* genscripts.sh: Accept use_sysroot option.  Set new variables
NATIVE and USE_LIBPATH.  Prepend "=" to directory names if
$use_sysroot.  Don't search $tool_lib if $use_sysroot.
* ldfile.c (ldfile_add_library_path): Handle leading '='.
* ldmain.c (TARGET_SYSTEM_ROOT): Define if not defined.
(ld_sysroot): New variable.
(main): Initialize ld_sysroot.
* ldmain.h (ld_sysroot): New extern.
* emultempl/elf32.em: Use NATIVE and USE_LIBPATH instead of
searching $EMULATION_LIBPATH.
(gld${EMULATION_NAME}_add_sysroot): New function.
(gld${EMULATION_NAME}_check_ld_so_conf): Use it.  Honor ld_sysroot.
(gld${EMULATION_NAME}_after_open): Likewise.  Only search
environment variables if $NATIVE.
* ld.texinfo (Options): Mention "=" prefix in the description of -L.
* NEWS: Mention --with-sysroot.

* emulparams/elf32bmipn32-defs.sh: Set NATIVE and LIBPATH_SUFFIX
instead of setting LIB_PATH.
* emulparams/elf32ppc.sh: Likewise.
* emulparams/elf64_s390.sh: Likewise.
* emulparams/elf64_sparc.sh: Likewise.
* emulparams/elf64ppc.sh: Likewise.
* emulparams/elf_x86_64.sh: Likewise.

* emulparams/elf64_aix.sh: Add "=" prefixes to LIB_PATH.
* emulparams/elf64hppa.sh: Add "=" prefixes to LIB_PATH.

daily update

* ld/pe-dll.c (autofilter_symbollist): Add cygwin_crt0.

daily update

* configure.in (LD): Improve test for gcc.  Try to set LD to the ld used
by gcc if LD is not defined and we are not doing a Canadian Cross.
* configure: Rebuilt.

* Makefile.am (ldmain.o): Pass BINDIR.
* Makefile.in: Regenerated.
* ldmain.c (set_scripts_dir): Use make_relative_prefix for the first
search path.

* readelf.c (guess_is_rela): Handle EM_IQ2000.
(get_machine_name): Likewise.
(dump_relocations): Likewise.
* NEWS: Mention IQ2000 support.

* Makefile.am (ALL_EMULATIONS): Add eelf32iq2000.o.
(eelf32iq2000.c): New target.
* Makefile.in: Regenerate.
* configure.tgt: Handle iq2000-*-elf.
* emulparams/elf32iq10.sh: New file.
* emulparams/elf32iq2000.sh: New file.
* scripttempl/iq2000.sc: New file.

daily update

* configure.in: Add iq2000-elf target.
* configure: Regenerate.
* config/tc-iq2000.c: New file.
* config/tc-iq2000.h: Likewise.

* gas/iq2000: New testsuite.

* Makefile.am (ALL_MACHINES): Add cpu-iq2000.lo.
(ALL_MACHINES_CFILES): Add cpu-iq2000.c.
(BFD32_BACKENDS): Add elf32-iq2000.lo.
(BFD32_BACKENDS_CFILES): Add elf32-iq2000.c.
(cpu-iq2000.lo): New target.
* Makefile.in: Regenerate.
* config.bfd: Handle iq2000-*-elf.
* archures.c (bfd_architecture): Add bfd_{arch,mach}_iq2000.
(bfd_archures_list): Add bfd_iq2000_arch.
* configure.in: Handle bfd_elf32_iq2000_vec.
* configure: Regenerate.
* reloc.c: Add BFD_RELOC_IQ2000_OFFSET_16, BFD_RELOC_IQ2000_OFFSET_21,
and BFD_RELOC_IQ2000_UHI16.
* targets.c (bfd_elf32_iq2000_vec): Declare.
(bfd_target_vector): Add bfd_elf32_iq2000_vec.
* elf.c (prep_headers): Set e_machine to EM_IQ2000.
* cpu-iq2000.c: New file.
* elf32-iq2000.c: Likewise.
* libbfd.h: Regenerate.
* bfd-in2.h: Likewise.

* iq2000-asm.c: New file.
* iq2000-desc.c: Likewise.
* iq2000-desc.h: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-ibld.c: Likewise.
* iq2000-opc.c: Likewise.
* iq2000-opc.h: Likewise.
* Makefile.am (HFILES): Add iq2000-desc.h, iq2000-opc.h.
(CFILES): Add iq2000-asm.c, iq2000-desc.c, iq2000-dis.c,
iq2000-ibld.c, iq2000-opc.c.
(ALL_MACHINES): Add iq2000-asm.lo, iq2000-desc.lo, iq2000-dis.lo,
iq2000-ibld.lo, iq2000-opc.lo.
(CLEANFILES): Add stamp-iq2000.
(IQ2000_DEPS): New macro.
(stamp-iq2000): New target.
* Makefile.in: Regenerate.
* configure.in: Handle bfd_iq2000_arch.
* configure: Regenerate.

* dis-asm.h (print_insn_iq2000): Declare.
* common.h (EM_IQ2000): Define.
* iq2000.h: New file.

* ld-mips-elf/mips-elf-flags.exp: Add -mips4 to a -mgp64 test.

oops - omitted from previous delta - a reworking of the linker relaxation code.

daily update

2003-01-02  Chris Demetriou  <cgd@broadcom.com>

        * mips-dis.c (print_insn_args): Use position extracted by "+A"
        to calculate size for "+B".  Redo code for "+C" so it shares
        the same style as "+A" and "+B" now do.

bfd/
* elfxx-mips.c: Include libiberty.h.
(elf_mips_isa, _bfd_mips_elf_mach_extends_p): Remove.
(mips_set_isa_flags): New function, split out from...
(_bfd_mips_elf_final_write_processing): ...here.  Only call
mips_set_isa_flags if the EF_MIPS_MACH bits are clear.
(mips_mach_extensions): New array.
(mips_32bit_flags_p): New function.
(_bfd_mips_elf_merge_private_bfd_data): Rework architecture checks.
Use mips_32bit_flags_p to check if one binary is 32-bit and the
other is 64-bit.  When adopting IBFD's architecture, adopt the
bfd_mach as well as the flags.

ld/testsuite/
* ld-mips-elf/jr.s: New file.
* ld-mips-elf/mips-elf-flags.exp: New test.

* readelf.c (get_machine_flags): Handle E_MIPS_ARCH_32R2.

2003-01-02  Chris Demetriou  <cgd@broadcom.com>

        * mips-dis.c: Update copyright years.
        (print_insn_arg): Rename to...
        (print_insn_args): This, returning void.  Process the whole
        string of args rather than a single one.  Reindent.
        (print_insn_mips): Update to match the above.

2003-01-02  H.J. Lu <hjl@gnu.org>

* Makefile.in (DESTDIR): New.
(install-info): Use it.

[ gas/ChangeLog ]
2003-01-02  Chris Demetriou  <cgd@broadcom.com>

        * config/tc-mips.c: Update copyright years to include 2003.
        (mips_ip): Fix indentation of "+A", "+B", and "+C" handling.
        Additionally, clean up their code slightly and clean up their
        comments some more.

        * doc/c-mips.texi: Add MIPS32r2 to ".set mipsN" documentation.

[ gas/testsuite/ChangeLog ]
2003-01-02  Chris Demetriou  <cgd@broadcom.com>

        * gas/mips/elf_arch_mips32r2.d: Fix file description comment.

[ include/opcode/ChangeLog ]
2003-01-02  Chris Demetriou  <cgd@broadcom.com>

        * mips.h: Update copyright years to include 2002 (which had
        been missed previously) and 2003.  Make comments about "+A",
        "+B", and "+C" operand types more descriptive.

Rework IP2k linker relxation.

Add do_pseudo_reloc and _pei386_runtime_relocator to the exclude list.

* ldfile.c: Fix comment typos.
* ldlang.c: Likewise.
* mri.c: Likewise.
* pe-dll.c: Likewise.

* doc/Makefile.am (as.1): Depend on "asconfig.texi gasver.texi
$(CPU_DOCS)".
* doc/Makefile.in: Regenerate.

* src-release (ETC_SUPPORT): Add fdl.texi and texi2pod.pl.

Suggested by Manfred Hollstein <manfred.h@gmx.net>:
* Makefile.am (ld.1): Depend on configdoc.texi
and ldver.texi.
* Makefile.in: Regenerated.

daily update

    * config/obj-elf.c (special_sections): Work around HP's incorrect usage
        of .init and .fini sections for array initializers and finalizers.

2002-12-31  Chris Demetriou  <cgd@broadcom.com>

        * mips-opc.c (mips_builtin_opcodes): Move "di" into the
        right order alphabetically, and make all hex constants use
        lower-case letters.

daily update

* Makefile.in: Rebuilt.
* Makefile.def (target_modules) [libffi]: Allow installation.

* configure.in: Fix use of $program_transform_name.
* configure: Regenerated.

[ gas/ChangeLog ]
2002-12-31  Chris Demetriou  <cgd@broadcom.com>

* config/tc-mips.c (validate_mips_insn, mips_ip): Recognize
the "+D" operand, which will be used only by the disassembler.

[ gas/testsuite/ChangeLog ]
2002-12-31  Chris Demetriou  <cgd@broadcom.com>

* gas/mips/cp0sel-names-mips32.d: New test.
* gas/mips/cp0sel-names-mips32r2.d: New test.
* gas/mips/cp0sel-names-mips64.d: New test.
* gas/mips/cp0sel-names-numeric.d: New test.
* gas/mips/cp0sel-names-sb1.d: New test.
* gas/mips/cp0sel-names.s: New test source file.
* gas/mips/mips.exp: Run new tests.

[ include/opcode/ChangeLog ]
2002-12-31  Chris Demetriou  <cgd@broadcom.com>

* mips.h: Note that the "+D" operand type name is now used.

[ opcodes/ChangeLog ]
2002-12-31  Chris Demetriou  <cgd@broadcom.com>

* mips-dis.c (mips_cp0sel_name): New structure.
(mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2)
(mips_cp0sel_names_sb1): New arrays.
(mips_arch_choice): New structure members "cp0sel_names" and
"cp0sel_names_len".
(mips_arch_choices): Add references to new cp0sel_names arrays
as appropriate, and make all existing entries reference
appropriate mips_XXX_names_numeric arrays rather than simply
using NULL.
(mips_cp0sel_names, mips_cp0sel_names_len): New variables.
(lookup_mips_cp0sel_name): New function.
(set_default_mips_dis_options): Set mips_cp0sel_names and
mips_cp0sel_names_len as appropriate.  Remove now-unnecessary
checks for NULL register name arrays.
(parse_mips_dis_option): Likewise.
(print_insn_arg): Handle "+D" operand type.
* mips-opc.c (mips_builtin_opcodes): Add new "+D" variants
of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register
names symbolically.

[ gas/testsuite/ChangeLog ]
2002-12-30  Chris Demetriou  <cgd@broadcom.com>

* gas/mips/elf_arch_mips1.d: New test.
* gas/mips/elf_arch_mips2.d: New test.
* gas/mips/elf_arch_mips3.d: New test.
* gas/mips/elf_arch_mips4.d: New test.
* gas/mips/elf_arch_mips5.d: New test.
* gas/mips/elf_arch_mips32.d: New test.
* gas/mips/elf_arch_mips32r2.d: New test.
* gas/mips/elf_arch_mips64.d: New test.
* gas/mips/empty.s: New test source file.
* gas/mips/mips.exp: Run new tests.

* gas/mips/elf_ase_mips16.d: Change to use empty.s
* gas/mips/elf_ase_mips16.s: Remove.

oops - omitted from previous delta

fix date on last entry.  *sigh*

[ bfd/ChangeLog ]
2002-12-30  Chris Demetriou  <cgd@broadcom.com>

* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.

[ binutils/ChangeLog ]
2002-12-30  Chris Demetriou  <cgd@broadcom.com>

* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.

[ gas/ChangeLog ]
2002-12-30  Chris Demetriou  <cgd@broadcom.com>

* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.

[ gas/testsuite/ChangeLog ]
2002-12-30  Chris Demetriou  <cgd@broadcom.com>

* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry.  Run new tests mentioned above.

[ include/elf/ChangeLog ]
2002-12-30  Chris Demetriou  <cgd@broadcom.com>

* mips.h (E_MIPS_ARCH_32R2): New define.

[ include/opcode/ChangeLog ]
2002-12-30  Chris Demetriou  <cgd@broadcom.com>

* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.

[ opcodes/ChangeLog ]
2002-12-30  Chris Demetriou  <cgd@broadcom.com>

* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll".  Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.

* configure.in (baseargs): Don't remove first configure argument.
* configure: Regenerated.

daily update

Add support for msp430.

(HAVE_REALPATH): New entry.
(HAVE_SYS_STAT_H, HAVE_SYS_TYPES_H): Removed: obsolete.

New win32 topics: 'symbol aliasing' and 'export dll symbols'.

Added some more pseudo opcodes for system call processing.

daily update

* Makefile.tpl (local-distclean): Don't remove...
(multilib.ts): ... this.  Moved into...
(multilib.out): ... this.  Don't use sub-make.
($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
$(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
(configure-build-[+module+], configure-[+module+],
configure-target-[+module+], configure-gcc): ... these.  Test
for Makefile existence.  Drop config.status from dependencies.
* Makefile.in: Rebuilt.
* configure.in: Move gcc-version-trigger to the end of
ac_configure_args.  Add comments to maybedep.tmp and
serdep.tmp.  Introduce --disable-serial-configure.  Remove
nonopt from baseargs, matching and removing corresponding
whitespace while at it.
* configure: Rebuilt.

daily update

* elf.c (elf_sort_sections): Don't reorder .tbss.
(assign_file_positions_for_segments): Only adjust off/voff
for increased alignment in PT_LOAD or PT_NOTE segment,
but adjust p_filesz for .tbss too.  in PT_LOAD consider
.tbss to have zero memory size.
(copy_private_bfd_data) [SECTION_SIZE]: Define.
[IS_CONTAINED_BY_VMA, IS_CONTAINED_BY_LMA]: Use it.
[INCLUDE_SECTION_IN_SEGMENT]: Only put SHF_TLS sections
into PT_TLS segment.  Never put SHF_TLS sections in
segments other than PT_TLS or PT_LOAD.

* elf64-alpha.c (elf64_alpha_finish_dynamic_sections): Clear .plt
sh_entsize.

* configure.in (host_configargs): Replace reference to
no-longer-defined buildopts with --build=${build_alias}.
* configure: Rebuilt.

* acx.m4: Name cache variables properly.
(NCN_STRICT_CHECK_TOOL): If program is not found and
value-if-not-found is empty, use ${ncn_tool_prefix}$2 or $2,
depending on whether build != host or not.
(NCN_STRICT_CHECK_TARGET_TOOL): Ditto, with the target prefix.

* Makefile.tpl ($(NOTPARALLEL)): Move to the end.  Bring uses of
program_transform_name to standard idiom.
(AUTOGEN, AUTOCONF): Define.
(Makefile.in): Use $(AUTOGEN).
(Makefile): Depend on config.status, and use autoconf-style rule to
build it.  Move original commands to...
(config.status): ... this new target.
(configure): Add $(srcdir).  Depend on config/acx.m4.  Use
$(AUTOCONF).
* Makefile.in: Rebuilt.

* Makefile.tpl: Fix dramatic bustage due to change in
program_transform_name.
* Makefile.in: Regenerate.

* configure.in: Remove unnecessary PATH setting.
* configure: Regnerate.

* configure.in: Don't default to unprefixed tools unless
the native tools will work.
* configure: Regenerate.

missed in previous giant commit

(toplev)
* configure.in: Convert to autoconf script.  Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.

2002-12-27  Chris Demetriou  <cgd@broadcom.com>

        * gas/mips/mips.exp: Define the notion of an "architecture data
        array," add comments indicating how to add a new architecture and
        suggestions for adding new tests.  Populate the architecture data
        array with many known architectures and convert many tests to
        be run for multiple architectures.
        (mips_arches): New global array.
        (mips_arch_create, mips_arch_list_all, mips_arch_data)
        (mips_arch_displayname, mips_arch_properties)
        (mips_arch_as_flags, mips_arch_objdump_flags, mips_arch_matches)
        (mips_arch_list_matching): New functions to operate on mips_arches.
        (run_dump_test_arch, run_dump_test_arches, run_list_test_arch)
        (run_list_test_arches): New functions.
        (run_list_test): Document and add an optional "test name" argument.
        * gas/mips/abs.d: Remove CPU-specific assembler and objdump flags,
        and CPU names from test names.
        * gas/mips/add.d: Likewise.
        * gas/mips/and.d: Likewise.
        * gas/mips/dli.d: Likewise.
        * gas/mips/jal-empic-elf-2.d: Likewise.
        * gas/mips/jal-empic-elf-3.d: Likewise.
        * gas/mips/jal-empic-elf.d: Likewise.
        * gas/mips/lb-svr4pic.d: Likewise.
        * gas/mips/lb.d: Likewise.
        * gas/mips/mips32.d: Likewise.
        * gas/mips/mips4.d: Likewise.
        * gas/mips/mips64.d: Likewise.
        * gas/mips/rol-hw.d: Likewise.
        * gas/mips/rol.d: Likewise.
        * gas/mips/rol64-hw.d: Likewise.
        * gas/mips/rol64.d: Likewise.
        * gas/mips/elf-jal.d: Likewise.  Also, indicate ELF in test name.
        * gas/mips/mips64-mdmx.d: Tweak printed name to indicate that this
        test uses the -mdmx flag.
        * gas/mips/mips64-mips3d.d: Tweak printed name to indicate that
        this test uses the -mips3d flag.
        * gas/mips/mips64-mips3d-incl.d: New file.

* configure: Remove unneeded 'export's.  Make CC_FOR_TARGET,
CXX_FOR_TARGET, GCJ_FOR_TARGET substituted in configure.in only.

* ChangeLog: Move a couple of entries from here to winsup/cygwin,
where they belong.

daily update

Fix ChangeLog for previous: mips-dis.c now includes libiberty.h

[ binutils/ChangeLog ]
2002-12-27  Chris Demetriou  <cgd@broadcom.com>

        * doc/binutils.texi (objdump): Document MIPS -M options.

[ gas/testsuite/ChangeLog ]
2002-12-27  Chris Demetriou  <cgd@broadcom.com>

        * gas/mips/cp0-names-mips32.d: New file.
        * gas/mips/cp0-names-mips64.d: New file.
        * gas/mips/cp0-names-numeric.d: New file.
        * gas/mips/cp0-names-sb1.d: New file.
        * gas/mips/cp0-names.s: New file.
        * gas/mips/fpr-names-32.d: New file.
        * gas/mips/fpr-names-64.d: New file.
        * gas/mips/fpr-names-n32.d: New file.
        * gas/mips/fpr-names-numeric.d: New file.
        * gas/mips/fpr-names.s: New file.
        * gas/mips/gpr-names-32.d: New file.
        * gas/mips/gpr-names-64.d: New file.
        * gas/mips/gpr-names-n32.d: New file.
        * gas/mips/gpr-names-numeric.d: New file.
        * gas/mips/gpr-names.s: New file.
        * gas/mips/mips.exp: Run new tests.

[ include/ChangeLog ]
2002-12-27  Chris Demetriou  <cgd@broadcom.com>

        * dis-asm.h (print_mips_disassembler_options): Prototype.

[ include/opcode/ChangeLog ]
2002-12-19  Chris Demetriou  <cgd@broadcom.com>

        * mips.h (OP_OP_COP0, OP_OP_COP1, OP_OP_COP2, OP_OP_COP3)
        (OP_OP_LWC1, OP_OP_LWC2, OP_OP_LWC3, OP_OP_LDC1, OP_OP_LDC2)
        (OP_OP_LDC3, OP_OP_SWC1, OP_OP_SWC2, OP_OP_SWC3, OP_OP_SDC1)
        (OP_OP_SDC2, OP_OP_SDC3): Define.

[ opcodes/ChangeLog ]
2002-12-27  Chris Demetriou  <cgd@broadcom.com>

        * disassemble.c (disassembler_usage): Add invocation of
        print_mips_disassembler_options.
        * mips-dis.c (print_mips_disassembler_options)
        (set_default_mips_dis_options, parse_mips_dis_option)
        (parse_mips_dis_options, choose_abi_by_name, choose_arch_by_name)
        (choose_arch_by_number): New functions.
        (mips_abi_choice, mips_arch_choice): New structures.
        (mips32_reg_names, mips64_reg_names, reg_names): Remove.
        (mips_gpr_names_numeric, mips_gpr_names_oldabi)
        (mips_gpr_names_newabi, mips_fpr_names_numeric)
        (mips_fpr_names_32, mips_fpr_names_n32, mips_fpr_names_64)
        (mips_cp0_names_numeric, mips_cp0_names_mips3264)
        (mips_cp0_names_sb1, mips_abi_choices, mips_arch_choices)
        (mips_processor, mips_isa, mips_gpr_names, mips_fpr_names)
        (mips_cp0_names): New variables.
        (print_insn_args): Use new variables to print GPR, FPR, and CP0
        register names.
        (mips_isa_type): Remove.
        (print_insn_mips): Remove ISA and CPU setup since it is now done...
        (_print_insn_mips): Here.  Remove register setup code, and
        call set_default_mips_dis_options and parse_mips_dis_options
        instead.
        (print_mips16_insn_arg): Use mips_gpr_names instead of mips32_names.

* fhandler.h (fhandler_tty_master::set_winsize): Declare new function.
* fhandler_console.cc (fhandler_console::send_winch_maybe): If appropriate,
call tty master function to handle screen size change.
* fhandler_tty.cc (fhandler_tty_master::set_winsize): New function.
(fhandler_tty_master::init): Call set_winsize to set initial screen size.