OSDN Git Service
Giuliano Pochini [Sun, 14 Feb 2010 17:16:10 +0000 (18:16 +0100)]
ALSA: Echoaudio - Add suspend support #2
This patch adds rearranges parts of the initialization code and adds
suspend and resume callbacks.
This patch adds suspend and resume callbacks.
It also rearranges parts of the initialization code so it can be
used in both the first initialization (when the module is loaded we
also have to load default settings) and the resume callback (where
we have to restore the previous settings).
Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Giuliano Pochini [Sun, 14 Feb 2010 17:15:59 +0000 (18:15 +0100)]
ALSA: Echoaudio - Add suspend support #1
Move the controls init code outside the init_hw() function because is must
not be called during resume.
This patch moves the code that initializes the card's controls with
default valued from the init_hw() function into a separated
set_mixer_defaults() function (one for each of the 16 supported
cards). This change is necessary because during resume we must
resurrect the hardware without losing the previous
settings. set_mixer_defaults() must be called only once when the
module is loaded.
Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Giuliano Pochini [Sun, 14 Feb 2010 17:15:51 +0000 (18:15 +0100)]
ALSA: Echoaudio - Add firmware cache #2
This patch implements a simple cache for the firmware files when CONFIG_PM is defined.
This patch changes get_firmware(), free_firmware() and adds
free_firmware_cache(). The first two functions implement a very
simple cache and the latter is used to actually release all the stored
firmwares when the module is unloaded.
When CONFIG_PM is not enabled those functions act as before, that is
free_firmware() releases the firmware immediately and
free_firmware_cache() does nothing.
Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Giuliano Pochini [Sun, 14 Feb 2010 17:15:34 +0000 (18:15 +0100)]
ALSA: Echoaudio - Add firmware cache #1
Changes the way the firmware is passed through functions.
When CONFIG_PM is enabled the firmware cannot be released because the
driver will need it again to resume the card.
With this patch the firmware is passed as an index of the struct
firmware card_fw[] in place of a pointer. That same index is then used
to locate the firmware in the firmware cache.
Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 12 Feb 2010 09:42:38 +0000 (10:42 +0100)]
Merge remote branch 'alsa/devel' into topic/misc
Jaroslav Kysela [Thu, 11 Feb 2010 16:50:44 +0000 (17:50 +0100)]
ALSA: usbmixer - add possibility to remap dB values
USB devices tends to represent dB ranges in different way than ALSA expects.
Add possibility to override these values and add guessed values for
SoundBlaster MP3+.
Also rename 'Capture Input Source' control to 'Capture Source' for
SoundBlaster MP3+ and Extigy.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Alexey Dobriyan [Fri, 5 Feb 2010 22:21:03 +0000 (00:21 +0200)]
sound: use DEFINE_PCI_DEVICE_TABLE
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to
.devinit.rodata section, so they can be discarded in some cases,
and make them const.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sebastien Alaiwan [Fri, 5 Feb 2010 07:58:20 +0000 (08:58 +0100)]
ALSA: ice1712: fix: lock samplerate when samplerate locking is enabled
I found that the sampling rate locking setting of the ice1712 sound driver
was only half-respected : when the driver was locked to, let's say, 44100Hz,
and a usermode app was requesting 48000Hz playback, the request was succesful
although the soundcard would continue to run at 44100Hz.
Here's a patch that will make those requests to fail.
Signed-off-by: Sebastien Alaiwan <sebastien.alaiwan@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jaroslav Kysela [Tue, 2 Feb 2010 16:48:51 +0000 (17:48 +0100)]
ALSA: dummy driver - add model parameter
This is a cleanup for the dummy driver. The model kernel module parameter
is introduced to select the soundcard emulation.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Thadeu Lima de Souza Cascardo [Mon, 1 Feb 2010 18:17:01 +0000 (16:17 -0200)]
ALSA: trivial: sound seq ioctl dbg: print hexadecimal value padded with 0s
Instead of padding with blanks and printing "number=0x a", print
"number=0x0a".
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 1 Feb 2010 14:46:00 +0000 (15:46 +0100)]
Merge remote branch 'alsa/devel' into topic/misc
Clemens Ladisch [Mon, 1 Feb 2010 12:30:56 +0000 (13:30 +0100)]
sound: control: fix minimum TLV length
Allow TLV blocks that do not have any values; the smallest possible TLV
is an empty container or one where the information is only in the tag.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Clemens Ladisch [Mon, 1 Feb 2010 12:29:50 +0000 (13:29 +0100)]
sound: control: actually allow TLV command access
Creating a control with TLV_COMMAND access was not possible because
snd_ctl_new1() forgot to include it in the mask of allowable access
bits.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 27 Jan 2010 17:10:13 +0000 (18:10 +0100)]
ALSA: pcm_native - fix runtime->boundary calculation
The code in pcm_lib updating runtime->hw_ptr_interrupt expects
that runtime->boundary is divisible with runtime->period_size.
Thanks are going to Clemens Ladisch for the notice.
Fix the runtime->boundary calculation using buffer_size * period_size
as base and find a least common multiple for 32bit platforms when
the expression might overflow.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Takashi Iwai [Tue, 26 Jan 2010 17:13:04 +0000 (18:13 +0100)]
Merge remote branch 'alsa/devel' into topic/misc
Jaroslav Kysela [Tue, 26 Jan 2010 16:08:24 +0000 (17:08 +0100)]
ALSA: pcm_lib - return back hw_ptr_interrupt
Clemens Ladisch noted for hw_ptr_removal in "cleanup & merge hw_ptr
update functions" commit:
"It is possible for the status/delay ioctls to be called when the sound
card's pointer register alreay shows a position at the beginning of the
new period, but immediately before the interrupt is actually executed.
(This happens regularly on a SMP machine with mplayer.) When that
happens, the code thinks that the position must be at least one period
ahead of the current position and drops an entire buffer of data."
Return back the hw_ptr_interrupt variable. The last interrupt pointer
is always computed from the latest hw_ptr instead of tracking it
separately (in this case all hw_ptr checks and modifications might
influence also hw_ptr_interrupt and it is difficult to keep it
consistent).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Florian Zumbiehl [Tue, 26 Jan 2010 08:06:14 +0000 (09:06 +0100)]
ALSA: cs46xx: Fix cpu idling with resume
Make sure that capture DMA doesn't stay enabled after system resume
as that potentially prevents the processor from entering deep sleep
states.
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 21 Jan 2010 14:27:28 +0000 (15:27 +0100)]
Merge branch 'topic/noncached-mmap' into topic/misc
Jaroslav Kysela [Thu, 21 Jan 2010 13:54:38 +0000 (14:54 +0100)]
ALSA: hda - AD1988 codec - fix SPDIF-input mixer initialization (unmute)
The SPDIF-input pin 0x1c is muted by default in hardware. Unmute appropriate
pin to get captured samples instead zeros. Tested on Lenovo Thinkstation.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Takashi Iwai [Thu, 21 Jan 2010 13:27:14 +0000 (14:27 +0100)]
Merge remote branch 'alsa/devel' into topic/misc
Jaroslav Kysela [Thu, 21 Jan 2010 09:32:15 +0000 (10:32 +0100)]
ALSA: pcm_core: Fix wake_up() optimization
This change fixes the "ALSA: pcm_lib - optimize wake_up() calls for PCM I/O"
commit. New sleeping queue is introduced to separate user space and kernel
space wake_ups. runtime->nowake is renamed to twake (transfer wake).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Takashi Iwai [Mon, 18 Jan 2010 17:23:23 +0000 (18:23 +0100)]
Merge remote branch 'alsa/devel' into topic/misc
Clemens Ladisch [Mon, 18 Jan 2010 14:44:04 +0000 (15:44 +0100)]
sound: virtuoso: add Xonar DS support
Add experimental support for the Asus Xonar DS.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Clemens Ladisch [Mon, 18 Jan 2010 14:40:56 +0000 (15:40 +0100)]
sound: seq_timer: simplify snd_seq_timer_set_tick_resolution() parameters
As snd_seq_timer_set_tick_resolution() is always called with the same
three fields of struct snd_seq_timer, it suffices to give that as the
only parameter.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Takashi Iwai [Mon, 18 Jan 2010 13:58:57 +0000 (14:58 +0100)]
ALSA: pcm - Call pgprot_noncached() for vmalloc'ed buffers
pgprot_noncached() can be set for vmalloc'ed buffers safely, and we'd
need non-cached behavior more or less, even for the intermediate ring-
buffers.
Now snd_pcm_lib_mmap_vmalloc() is added as the common PCM mmap callback
that is coupled with snd_pcm_lib_alloc_vmalloc_buffer() & co.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 18 Jan 2010 13:49:50 +0000 (14:49 +0100)]
ALSA: pcm - Remove unneeded ifdef pgprot_noncached
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 14 Jan 2010 08:19:46 +0000 (09:19 +0100)]
ALSA: ctxfi - Add subsystem option
Added a new option "subsystem" to override the PCI SSID for identifying
the card type.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 14 Jan 2010 08:16:52 +0000 (09:16 +0100)]
ALSA: Add snd_pci_quirk_lookup_id()
Added a new function to look up a quirk entry with the given PCI SSID
instead of a pci device pointer. This can be used when the searched ID
is overridden for debugging or such a purpose.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 13 Jan 2010 07:32:53 +0000 (08:32 +0100)]
Merge branch 'devel' of git.alsa-project.org:alsa-kernel into topic/misc
Jaroslav Kysela [Wed, 13 Jan 2010 07:12:31 +0000 (08:12 +0100)]
ALSA: pcm_lib - fix wrong delta print for jiffies check
The previous jiffies delta was 0 in all cases. Use hw_ptr variable to
store and print original value.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Alan Cox [Mon, 4 Jan 2010 16:22:59 +0000 (16:22 +0000)]
sound_oss: remove use of old BKL ioctl path
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 12 Jan 2010 08:40:08 +0000 (09:40 +0100)]
Merge commit alsa/devel into topic/misc
Conflicts:
include/sound/version.h
Daniel Drake [Thu, 7 Jan 2010 12:47:04 +0000 (13:47 +0100)]
ALSA: hda - support OLPC XO-1.5 DC input
The XO's audio hardware is wired up to allow DC sensors (e.g. light
sensors, thermistors, etc) to be plugged in through the microphone jack.
Add sound mixer controls to allow this mode to be enabled and tweaked.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Daniel Drake [Thu, 7 Jan 2010 12:46:25 +0000 (13:46 +0100)]
ALSA: hda - Configure XO-1.5 microphones at capture time
The XO-1.5 has a microphone LED designed to indicate to the user when
something is being recorded.
This light is controlled by the microphone bias voltage and it is
currently coming on all the time.
This patch defers the microphone port configuration until when recording
is actually taking place, fixing the behaviour of the LED.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 8 Jan 2010 08:11:18 +0000 (09:11 +0100)]
Merge branch 'topic/hda' of git://git./linux/kernel/git/tiwai/sound-2.6 into devel
Ken Prox [Fri, 8 Jan 2010 08:01:47 +0000 (09:01 +0100)]
ALSA: hda - conexant - Fixed microphone mixer for HP Compaq Presario F700
Added patch for Hewlett-Packard Company Device Subsystem id - 103c:30ea.
Signed-off-by: Ken Prox <kprox@users.sourceforge.net>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Krzysztof Helt [Fri, 1 Jan 2010 18:05:43 +0000 (19:05 +0100)]
ALSA: ac97_codec: merge WM9703 and WM9705 ops
The WM9705 and WM9703 ops are the same actually so use
the same code for both.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 8 Jan 2010 07:43:01 +0000 (08:43 +0100)]
ALSA: pcm_lib: fix "something must be really wrong" condition
When runtime->periods == 1 or when pointer crosses end of ring buffer,
the delta might be greater than buffer_size.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 7 Jan 2010 14:36:31 +0000 (15:36 +0100)]
ALSA: pcm_lib - optimize wake_up() calls for PCM I/O
As noted by pl bossart <bossart.nospam@gmail.com>, the PCM I/O routines
(snd_pcm_lib_write1, snd_pcm_lib_read1) should block wake_up() calls
until all samples are not processed.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 5 Jan 2010 16:19:34 +0000 (17:19 +0100)]
ALSA: pcm_lib - cleanup & merge hw_ptr update functions
Do general cleanup in snd_pcm_update_hw_ptr*() routines and merge them.
The main change is hw_ptr_interrupt variable removal to simplify code
logic. This variable can be computed directly from hw_ptr.
Ensure that updated hw_ptr is not lower than previous one (it was possible
with old code in some obscure situations when interrupt was delayed or
the lowlevel driver returns wrong ring buffer position value).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Sun, 20 Dec 2009 10:47:57 +0000 (11:47 +0100)]
ALSA: pcm_lib - add possibility to log last 10 DMA ring buffer positions
In some debug cases, it might be usefull to see previous ring buffer
positions to determine position problems from the lowlevel drivers.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 17 Dec 2009 16:34:39 +0000 (17:34 +0100)]
ALSA: pcm_lib.c - convert second xrun_debug() parameter to use defines
To increase code readability, convert send xrun_debug() argument to
use defines.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 28 Dec 2009 15:15:03 +0000 (16:15 +0100)]
ALSA: Release v1.0.22.1
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
John S. Gruber [Sun, 27 Dec 2009 17:19:59 +0000 (12:19 -0500)]
ALSA: usb-audio: use usbquirk.h for detection of HVR-950Q/850
Detect the HVR-950Q HVR-850 urb data alignment quirk using usbquirk.h
rather than using a case statement in snd_usb_audio_probe.
Signed-off-by: John S. Gruber <JohnSGruber@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
John S. Gruber [Sun, 27 Dec 2009 17:19:58 +0000 (12:19 -0500)]
ALSA: usb-audio: relax urb data align. restriction HVR-950Q and HVR-850 only
Addressing audio quality problem.
In sound/usb/usbaudio.c, for the Hauppage HVR-950Q and HVR-850 only, change
retire_capture_urb to allow transfers on audio sub-slot boundaries rather
than audio slots boundaries.
With these devices the left and right channel samples can be split between
two different urbs. Throwing away extra channel samples causes a sound
quality problem for stereo streams as the left and right channels are
swapped repeatedly, perhaps many times per second.
Urbs unaligned on sub-slot boundaries are still truncated to the next
lowest stride (audio slot) to retain synchronization on samples even
though left/right channel synchronization may be lost in this case.
Detect the quirk using a case statement in snd_usb_audio_probe.
BugLink: https://bugs.launchpad.net/ubuntu/+bug/495745
Signed-off-by: John S. Gruber <JohnSGruber@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clemens Ladisch [Sun, 27 Dec 2009 17:19:57 +0000 (12:19 -0500)]
ALSA: usb-audio: make buffer pointer based on bytes instead on frames
Since there are devices that do not align the size of their data packets
to frame boundaries, the driver needs to be able to keep track of
partial frames. This patch prepares for support for such devices by
changing the hwptr_done variable from a frame counter to a byte counter.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sergiy Kovalchuk [Sun, 27 Dec 2009 17:13:41 +0000 (09:13 -0800)]
ALSA: usb-audio - Added functionality for E-mu 0404USB/0202USB/TrackerPre
Added functionality:
1) Extension Units support (all XU settings now available at alsamixer,
kmix, etc):
- "AnalogueIn soft limiter" switch;
- "Sample rate" selector (values 0,1,2,3,4,5 corresponds to 44.1 48 ...
192 kHz);
- "DigitalIn CLK source" selector (internal/external) (**);
- "DigitalOut format SPDIF/AC3" switch (**);
(**)E-mu-0404usb only.
2) Automatic device sample rate adjustment depending on substream
samplerate for both capture and playback substream.
[minor coding-style fixes by tiwai]
Signed-off-by: Sergiy Kovalchuk <cnb_zerg@yahoo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Daniel T Chen [Sun, 27 Dec 2009 23:52:08 +0000 (18:52 -0500)]
ALSA: hda: Refactor powerdown for Realtek HDA codecs
This patch converts the alc889 Aspire-specific powerdown to a generic
one. Like the previous effort, it currently only handles Front and PCM
but can be easily extended to cover other nids. The existing hook for
alc889 Aspire-specific remains enabled. Upon further testing, I've added
its use for ALC861_AUTO as well. Following patches will enable them for
other quirks.
Tested-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Daniel T Chen [Sun, 27 Dec 2009 23:48:29 +0000 (18:48 -0500)]
ALSA: hda: Add powerdown for Analog Devices HDA codecs
This patch ports powerdown fixes to AD198x. Currently we only turn off
Front and HP for suspend, but this is easily extended for additional
nids.
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Sun, 27 Dec 2009 12:53:24 +0000 (13:53 +0100)]
ALSA: hda - Use strict_strtoul()
Rewrite the codes to use strict_strtoul() instead of simple_strtoul().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Sun, 27 Dec 2009 10:24:56 +0000 (11:24 +0100)]
ALSA: hda - Add sanity check for storing the user-defined pin configs
Check whether the given NID is a pin widget before storing the
user-defined pin configs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Sun, 27 Dec 2009 10:22:24 +0000 (11:22 +0100)]
ALSA: hda - Fix click noises at suspend/free with Realtek codecs
Call snd_hda_shutup_pins() at suspend and free for avoiding click noises.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Sun, 27 Dec 2009 10:18:59 +0000 (11:18 +0100)]
ALSA: hda - Add snd_hda_shutup_pins() helper function
Add a common helper function for clearing pin controls before suspend.
Use the pincfg array instead of looking through all widget tree.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Sat, 26 Dec 2009 09:36:12 +0000 (10:36 +0100)]
ALSA: hda - Add more hints for GPIO setup of IDT/STAC codecs
gpio_led, gpio_led_polarity and gpio_mute are added now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 25 Dec 2009 13:17:48 +0000 (14:17 +0100)]
Merge branch 'fix/hda' into topic/hda
Wu Fengguang [Fri, 25 Dec 2009 05:14:27 +0000 (13:14 +0800)]
ALSA: hda - HDMI sticky stream tag support
When we run the following commands in turn (with
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0),
speaker-test -Dhw:0,3 -c2 -twav # HDMI
speaker-test -Dhw:0,0 -c2 -twav # Analog
The second command will produce sound in the analog lineout _as well as_
HDMI sink. The root cause is, device 0 "reuses" the same stream tag that
was used by device 3, and the "intelhdmi - sticky stream id" patch leaves
the HDMI codec in a functional state. So the HDMI codec happily accepts
the audio samples which reuse its stream tag.
The proposed solution is to remember the last device each azx_dev was
assigned to, and prefer to
1) reuse the azx_dev (and hence the stream tag) the HDMI codec last used
2) or assign a never-used azx_dev for HDMI
With this patch and the above two speaker-test commands,
HDMI codec will use stream tag 8 and Analog codec will use 5.
The stream tag used by HDMI codec won't be reused by others, as long
as we don't run out of the 4 playback azx_dev's. The legacy Analog
codec will continue to use stream tag 5 because its device id is 0
(this is a bit tricky).
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Krzysztof Helt [Wed, 23 Dec 2009 17:02:41 +0000 (18:02 +0100)]
ALSA: jazz16: refine dma and irq selection
Narrow the dma and irq selection after the DOS driver.
Add ALSA configuration description as well.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 25 Dec 2009 13:15:31 +0000 (14:15 +0100)]
Merge branch 'fix/misc' into topic/misc
Guennadi Liakhovetski [Thu, 24 Dec 2009 00:17:46 +0000 (01:17 +0100)]
ALSA: Fix indentation in pcm_native.c
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Thu, 24 Dec 2009 21:09:41 +0000 (13:09 -0800)]
Linux 2.6.33-rc2
Linus Torvalds [Thu, 24 Dec 2009 21:01:29 +0000 (13:01 -0800)]
Merge branch 'sysctl' of git://git./linux/kernel/git/ak/linux-misc-2.6
* 'sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-misc-2.6:
SYSCTL: Add a mutex to the page_alloc zone order sysctl
SYSCTL: Print binary sysctl warnings (nearly) only once
Linus Torvalds [Thu, 24 Dec 2009 21:01:13 +0000 (13:01 -0800)]
Merge branch 'hwpoison' of git://git./linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6:
HWPOISON: Add PROC_FS dependency to hwpoison injector v2
Linus Torvalds [Thu, 24 Dec 2009 21:00:02 +0000 (13:00 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits)
classmate-laptop: add support for Classmate PC ACPI devices
hp-wmi: Fix two memleaks
acer-wmi, msi-wmi: Remove needless DMI MODULE_ALIAS
dell-wmi: do not keep driver loaded on unsupported boxes
wmi: Free the allocated acpi objects through wmi_get_event_data
drivers/platform/x86/acerhdf.c: check BIOS information whether it begins with string of table
acerhdf: add new BIOS versions
acerhdf: limit modalias matching to supported
toshiba_acpi: convert to seq_file
asus_acpi: convert to seq_file
ACPI: do not select ACPI_DOCK from ATA_ACPI
sony-laptop: enumerate rfkill devices using SN06
sony-laptop: rfkill support for newer models
ACPI: fix OSC regression that caused aer and pciehp not to load
MAINTAINERS: add maintainer for msi-wmi driver
fujitu-laptop: fix tests of acpi_evaluate_integer() return value
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c: avoid cross-CPU interrupts by using smp_call_function_any()
ACPI: processor: remove _PDC object list from struct acpi_processor
ACPI: processor: change acpi_processor_set_pdc() interface
ACPI: processor: open code acpi_processor_cleanup_pdc
...
Linus Torvalds [Thu, 24 Dec 2009 20:59:11 +0000 (12:59 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c
ocfs2/trivial: Use proper mask for 2 places in hearbeat.c
Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.
Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode?
ocfs2: Use FIEMAP_EXTENT_SHARED
fiemap: Add new extent flag FIEMAP_EXTENT_SHARED
ocfs2: replace u8 by __u8 in ocfs2_fs.h
ocfs2: explicit declare uninitialized var in user_cluster_connect()
ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock()
ocfs2: return -EAGAIN instead of EAGAIN in dlm
ocfs2/cluster: Make fence method configurable - v2
ocfs2: Set MS_POSIXACL on remount
ocfs2: Make acl use the default
ocfs2: Always include ACL support
Linus Torvalds [Thu, 24 Dec 2009 20:57:45 +0000 (12:57 -0800)]
Merge branch 'for-linus' of /home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
VIDEO: cyberpro: pci_request_regions needs a persistent name
ARM: dma-isa: request cascade channel after registering it
ARM: footbridge: trim down old ISA rtc setup
ARM: fix PAGE_KERNEL
ARM: Fix wrong shared bit for CPU write buffer bug test
ARM: 5857/1: ARM: dmabounce: fix build
ARM: 5856/1: Fix bug of uart0 platfrom data for nuc900
ARM: 5855/1: putc support for nuc900
ARM: 5854/1: fix compiling error for NUC900
ARM: 5849/1: ARMv7: fix Oprofile events count
ARM: add missing include to nwflash.c
ARM: Kill CONFIG_CPU_32
ARM: Convert VFP/Crunch/XscaleCP thread_release() to exit_thread()
ARM: 5853/1: ARM: Fix build break on ARM v6 and v7
Linus Torvalds [Thu, 24 Dec 2009 20:55:40 +0000 (12:55 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
edac, pci: remove pesky debug printk
amd64_edac: restrict PCI config space access
amd64_edac: fix forcing module load/unload
amd64_edac: make driver loading more robust
amd64_edac: fix driver instance freeing
amd64_edac: fix K8 chip select reporting
Linus Torvalds [Thu, 24 Dec 2009 20:54:02 +0000 (12:54 -0800)]
Merge branch 'sh/for-2.6.33' of git://git./linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Ensure all PG_dcache_dirty pages are written back.
sh: mach-ecovec24: setup.c detailed correction
serial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx.
serial: sh-sci: earlyprintk zero uartclk fix
sh: Only use bl bit toggling for sleeping idle.
sh: Restore bl bit toggling in idle loop.
sh: Fix up MAX_DMA_CHANNELS definition when DMA is disabled.
sh: dmaengine support for SH7785
sh: dmaengine support for sh7724.
Russell King [Thu, 24 Dec 2009 13:36:21 +0000 (13:36 +0000)]
VIDEO: cyberpro: pci_request_regions needs a persistent name
Don't pass a name pointer from the kernel stack, it will not survive
and will result in corrupted /proc/iomem output.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Thu, 24 Dec 2009 14:45:39 +0000 (14:45 +0000)]
ARM: dma-isa: request cascade channel after registering it
We can't request the cascade channel before it's been registered, so
move it afterwards.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Thu, 24 Dec 2009 12:52:44 +0000 (12:52 +0000)]
ARM: footbridge: trim down old ISA rtc setup
This fixes a "start_kernel(): bug: interrupts were enabled early".
rtc_cmos now takes care of initializing the ISA RTC and reading the
current time and date from it; there's no need to repeat that here,
thereby causing interrupts to be enabled too early.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Thu, 24 Dec 2009 10:16:21 +0000 (10:16 +0000)]
ARM: fix PAGE_KERNEL
PAGE_KERNEL should not be executable; any area marked executable can
be prefetched into the instruction cache. We don't want vmalloc areas
to be read in this way.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Borislav Petkov [Mon, 21 Dec 2009 18:11:12 +0000 (19:11 +0100)]
edac, pci: remove pesky debug printk
Do not spam the logs needlessly with the sole info that
edac_pci_dev_parity_clear is being called.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Borislav Petkov [Mon, 21 Dec 2009 18:21:41 +0000 (19:21 +0100)]
amd64_edac: restrict PCI config space access
Do not access F2x19[0,4] on K8 since they're undefined there.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Borislav Petkov [Mon, 21 Dec 2009 17:55:18 +0000 (18:55 +0100)]
amd64_edac: fix forcing module load/unload
Clear the override flag after force-loading the module.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Borislav Petkov [Mon, 21 Dec 2009 17:13:01 +0000 (18:13 +0100)]
amd64_edac: make driver loading more robust
Currently, the module does not initialize fully when the DIMMs aren't
ECC but remains still loaded. Propagate the error when no instance of
the driver is properly initialized and prevent further loading.
Reorganize and polish error handling in amd64_edac_init() while at it.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Borislav Petkov [Mon, 21 Dec 2009 14:15:59 +0000 (15:15 +0100)]
amd64_edac: fix driver instance freeing
Fix use-after-free errors by pushing all memory-freeing calls to the end
of amd64_remove_one_instance().
Reported-by: Darren Jenkins <darrenrjenkins@gmail.com>
LKML-Reference: <
1261370306.11354.52.camel@ICE-BOX>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Borislav Petkov [Mon, 21 Dec 2009 13:52:53 +0000 (14:52 +0100)]
amd64_edac: fix K8 chip select reporting
Fix the case when amd64_debug_display_dimm_sizes() reports only half the
amount of DRAM on it because it doesn't account for when the single DCT
operates in 128-bit mode and merges chip selects from different DIMMs.
Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
LKML-Reference: <
200912112202.48173.johannes.hirte@fem.tu-ilmenau.de>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Len Brown [Thu, 24 Dec 2009 06:19:00 +0000 (01:19 -0500)]
Merge branch 'misc-2.6.33' into release
Len Brown [Thu, 24 Dec 2009 06:17:46 +0000 (01:17 -0500)]
Merge branch 'tc1100-wmi' into release
Len Brown [Thu, 24 Dec 2009 06:17:41 +0000 (01:17 -0500)]
Merge branch 'sony' into release
Len Brown [Thu, 24 Dec 2009 06:17:31 +0000 (01:17 -0500)]
Merge branch 'classmate' into release
Len Brown [Thu, 24 Dec 2009 06:17:21 +0000 (01:17 -0500)]
Merge branch 'pdc' into release
Len Brown [Thu, 24 Dec 2009 06:17:01 +0000 (01:17 -0500)]
Merge branches 'bugzilla-14446', 'bugzilla-14753' and 'bugzilla-14824' into release
Len Brown [Thu, 24 Dec 2009 06:16:35 +0000 (01:16 -0500)]
Merge branch 'osc' into release
Thadeu Lima de Souza Cascardo [Tue, 22 Dec 2009 00:20:01 +0000 (16:20 -0800)]
classmate-laptop: add support for Classmate PC ACPI devices
This add supports for devices like keyboard, backlight, tablet and
accelerometer.
This work is supported by International Syst S/A.
[randy.dunlap@oracle.com: cmpc_acpi: depends on ACPI]
[akpm@linux-foundation.org: readability tweaks]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Paul Mundt [Thu, 24 Dec 2009 06:16:02 +0000 (15:16 +0900)]
Merge branch 'sh/g3-prep' into sh/for-2.6.33
Markus Pietrek [Thu, 24 Dec 2009 06:12:02 +0000 (15:12 +0900)]
sh: Ensure all PG_dcache_dirty pages are written back.
With some of the cache rework an address aliasing optimization was added,
but this managed to fail on certain mappings resulting in pages with
PG_dcache_dirty set never writing back their dcache lines. This patch
reverts to the earlier behaviour of simply always writing back when the
dirty bit is set.
Signed-off-by: Markus Pietrek <Markus.Pietrek@emtrion.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Kuninori Morimoto [Thu, 24 Dec 2009 05:27:47 +0000 (05:27 +0000)]
sh: mach-ecovec24: setup.c detailed correction
o remove unused define
o add device name comment
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Thomas Renninger [Fri, 18 Dec 2009 14:29:23 +0000 (15:29 +0100)]
hp-wmi: Fix two memleaks
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Paul Mundt [Thu, 24 Dec 2009 05:52:43 +0000 (14:52 +0900)]
serial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx.
ctrl_xxx() is an antiquated SH interface, while __raw_xxx is the standard
API that accomplishes the same thing. As such, this converts the
remaining sh-sci straggles over, which enables the driver to be wired up
for ARM SH-Mobile CPUs as well.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Tue, 22 Dec 2009 03:37:28 +0000 (03:37 +0000)]
serial: sh-sci: earlyprintk zero uartclk fix
This establishes a sensible max baud rate for the earlyprintk cases where
the port's uartclk has not yet been determined.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Thomas Renninger [Fri, 18 Dec 2009 14:29:22 +0000 (15:29 +0100)]
acer-wmi, msi-wmi: Remove needless DMI MODULE_ALIAS
Now that we have WMI autoloading
the DMI matching is not needed anymore.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Acked-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Len Brown <len.brown@intel.com>
Dmitry Torokhov [Fri, 18 Dec 2009 06:19:42 +0000 (22:19 -0800)]
dell-wmi: do not keep driver loaded on unsupported boxes
There is no point in having the driver loaded in memory if we fail
to locate particular WMI GUID.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Anisse Astier [Fri, 4 Dec 2009 09:10:09 +0000 (10:10 +0100)]
wmi: Free the allocated acpi objects through wmi_get_event_data
These function allocate an acpi object by calling wmi_get_event_data, which
then calls acpi_evaluate_object, and it is not freed afterwards.
And kernel doc is fixed for parameters of wmi_get_event_data.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Peter Feuerer [Tue, 22 Dec 2009 00:20:06 +0000 (16:20 -0800)]
drivers/platform/x86/acerhdf.c: check BIOS information whether it begins with string of table
BIOS information is now checked whether it begins with the strings stored
in the BIOS table. Previous method did a strcmp, what lead to problems if
BIOS information has appended whitespaces.
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Peter Feuerer [Tue, 22 Dec 2009 00:20:05 +0000 (16:20 -0800)]
acerhdf: add new BIOS versions
Add new BIOS versions for following netbooks: Aspire 1810xx, Packard Bell
DOTMU.
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Stefan Bader [Tue, 22 Dec 2009 00:20:04 +0000 (16:20 -0800)]
acerhdf: limit modalias matching to supported
BugLink: https://bugs.launchpad.net/ubuntu/+bug/435958
The module alias currently matches any Acer computer but when loaded the
BIOS checks will only succeed on Aspire One models. This causes a invalid
BIOS warning for all other models (seen on Aspire 4810T). This is not
fatal but worries users that see this message. Limiting the moule alias
to models starting with AOA or DOA for Packard Bell.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Peter Feuerer <peter@piie.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Alexey Dobriyan [Tue, 22 Dec 2009 00:20:02 +0000 (16:20 -0800)]
toshiba_acpi: convert to seq_file
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Alexey Dobriyan [Tue, 22 Dec 2009 00:20:01 +0000 (16:20 -0800)]
asus_acpi: convert to seq_file
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Carlos R. Mafra [Tue, 22 Dec 2009 21:45:39 +0000 (13:45 -0800)]
ACPI: do not select ACPI_DOCK from ATA_ACPI
In March 2008 commit
0ac4a3c2fbbcadc3e96e4dc47d4ae802d66e6f67 ("ACPI: fix
ATA_ACPI build") made CONFIG_ACPI_DOCK be selected by CONFIG_ATA_ACPI because
of a build error when CONFIG_ATA_ACPI=y and CONFIG_ACPI_DOCK=m.
However, in September 2008 commit
898b054f3eec5921320ae8614b5bdd7b07ea5b43
("dock: make dock driver not a module") removed the possibility of having
CONFIG_ACPI_DOCK=m and therefore there is no need for selecting it when
CONFIG_ATA_ACPI=y.
This makes the kernel ~5 Kb smaller for people who don't have a dock by
allowing them to not have ACPI_DOCK compiled-in because of ATA_ACPI=y.
Signed-off-by: Carlos R. Mafra <crmafra@aei.mpg.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>