OSDN Git Service
Peter Maydell [Tue, 1 Feb 2022 19:48:15 +0000 (19:48 +0000)]
Merge remote-tracking branch 'remotes/kwolf-gitlab/tags/for-upstream' into staging
Block layer patches
- rbd: fix handling of holes in .bdrv_co_block_status
- Fix potential crash in bdrv_set_backing_hd()
- vhost-user-blk export: Fix shutdown with requests in flight
- FUSE export: Fix build failure on FreeBSD
- Documentation improvements
# gpg: Signature made Tue 01 Feb 2022 15:14:24 GMT
# gpg: using RSA key
DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kwolf-gitlab/tags/for-upstream:
block/rbd: workaround for ceph issue #53784
block/rbd: fix handling of holes in .bdrv_co_block_status
qemu-img: Unify [-b [-F]] documentation
qsd: Document fuse's allow-other option
block.h: remove outdated comment
block/export/fuse: Fix build failure on FreeBSD
block/export/fuse: Rearrange if-else-if ladder in fuse_fallocate()
block/export: Fix vhost-user-blk shutdown with requests in flight
block: bdrv_set_backing_hd(): use drained section
qemu-storage-daemon: Fix typo in vhost-user-blk help
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 1 Feb 2022 16:32:54 +0000 (16:32 +0000)]
Merge remote-tracking branch 'remotes/hreitz-gitlab/tags/pull-block-2022-02-01' into staging
Block patches:
- Add support to the iotests to test qcow2's zstd compression mode
- Fix post-migration block node permissions
- iotests fixes (051 and mirror-ready-cancel-error)
- Remove an outdated comment
# gpg: Signature made Tue 01 Feb 2022 13:34:54 GMT
# gpg: using RSA key
CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* remotes/hreitz-gitlab/tags/pull-block-2022-02-01: (24 commits)
block.h: remove outdated comment
iotests/migration-permissions: New test
block-backend: Retain permissions after migration
iotests: declare lack of support for compresion_type in IMGOPTS
iotest 214: explicit compression type
iotests 60: more accurate set dirty bit in qcow2 header
iotests: bash tests: filter compression type
iotest 39: use _qcow2_dump_header
iotests: massive use _qcow2_dump_header
iotests/common.rc: introduce _qcow2_dump_header helper
qcow2: simple case support for downgrading of qcow2 images with zstd
iotest 302: use img_info_log() helper
iotests.py: filter compression type out
iotests.py: filter out successful output of qemu-img create
iotest 065: explicit compression type
iotest 303: explicit compression type
iotests.py: rewrite default luks support in qemu_img
iotests: drop qemu_img_verbose() helper
iotests.py: qemu_img*("create"): support IMGOPTS='compression_type=zstd'
iotests: specify some unsupported_imgopts for python iotests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Lieven [Thu, 13 Jan 2022 14:44:26 +0000 (15:44 +0100)]
block/rbd: workaround for ceph issue #53784
librbd had a bug until early 2022 that affected all versions of ceph that
supported fast-diff. This bug results in reporting of incorrect offsets
if the offset parameter to rbd_diff_iterate2 is not object aligned.
This patch works around this bug for pre Quincy versions of librbd.
Fixes:
0347a8fd4c3faaedf119be04c197804be40a384b
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <
20220113144426.
4036493-3-pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Lieven [Thu, 13 Jan 2022 14:44:25 +0000 (15:44 +0100)]
block/rbd: fix handling of holes in .bdrv_co_block_status
the assumption that we can't hit a hole if we do not diff against a snapshot was wrong.
We can see a hole in an image if we diff against base if there exists an older snapshot
of the image and we have discarded blocks in the image where the snapshot has data.
Fix this by simply handling a hole like an unallocated area. There are no callbacks
for unallocated areas so just bail out if we hit a hole.
Fixes:
0347a8fd4c3faaedf119be04c197804be40a384b
Suggested-by: Ilya Dryomov <idryomov@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <
20220113144426.
4036493-2-pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hanna Reitz [Mon, 31 Jan 2022 13:59:08 +0000 (14:59 +0100)]
qemu-img: Unify [-b [-F]] documentation
qemu-img convert documents the backing file and backing format options
as follows:
[-B backing_file [-F backing_fmt]]
whereas qemu-img create has this:
[-b backing_file] [-F backing_fmt]
That is, for convert, we document that -F cannot be given without -B,
while for create, way say that they are independent.
Indeed, it is technically possible to give -F without -b, because it is
left to the block driver to decide whether this is an error or not, so
sometimes it is:
$ qemu-img create -f qed -F qed test.qed 64M
Formatting 'test.qed', fmt=qed size=
67108864 backing_fmt=qed [...]
And sometimes it is not:
$ qemu-img create -f qcow2 -F qcow2 test.qcow2 64M
Formatting 'test.qcow2', fmt=qcow2 cluster_size=65536 [...]
qemu-img: test.qcow2: Backing format cannot be used without backing file
Generally, it does not make much sense, though, and users should only
give -F with -b, so document it that way, as we have already done for
qemu-img convert (commit
1899bf47375ad40555dcdff12ba49b4b8b82df38).
Reported-by: Tingting Mao <timao@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20220131135908.32393-1-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hanna Reitz [Mon, 31 Jan 2022 10:31:24 +0000 (11:31 +0100)]
qsd: Document fuse's allow-other option
We did not add documentation to the storage daemon's man page for fuse's
allow-other option when it was introduced, so do that now.
Fixes:
8fc54f9428b9763f800 ("export/fuse: Add allow-other option")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20220131103124.20325-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 31 Jan 2022 12:56:15 +0000 (07:56 -0500)]
block.h: remove outdated comment
The comment "disk I/O throttling" doesn't make any sense at all
any more. It was added in commit
0563e191516 to describe
bdrv_io_limits_enable()/disable(), which were removed in commit
97148076, so the comment is just a forgotten leftover.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <
20220131125615.74612-1-eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Philippe Mathieu-Daudé [Tue, 1 Feb 2022 11:26:55 +0000 (12:26 +0100)]
block/export/fuse: Fix build failure on FreeBSD
When building on FreeBSD we get:
[816/6851] Compiling C object libblockdev.fa.p/block_export_fuse.c.o
../block/export/fuse.c:628:16: error: use of undeclared identifier 'FALLOC_FL_KEEP_SIZE'
if (mode & FALLOC_FL_KEEP_SIZE) {
^
../block/export/fuse.c:651:16: error: use of undeclared identifier 'FALLOC_FL_PUNCH_HOLE'
if (mode & FALLOC_FL_PUNCH_HOLE) {
^
../block/export/fuse.c:652:22: error: use of undeclared identifier 'FALLOC_FL_KEEP_SIZE'
if (!(mode & FALLOC_FL_KEEP_SIZE)) {
^
3 errors generated.
FAILED: libblockdev.fa.p/block_export_fuse.c.o
Meson indeed reported FALLOC_FL_PUNCH_HOLE is not available:
C compiler for the host machine: cc (clang 10.0.1 "FreeBSD clang version 10.0.1")
Checking for function "fallocate" : NO
Checking for function "posix_fallocate" : YES
Header <linux/falloc.h> has symbol "FALLOC_FL_PUNCH_HOLE" : NO
Header <linux/falloc.h> has symbol "FALLOC_FL_ZERO_RANGE" : NO
...
Similarly to commit
304332039 ("block/export/fuse.c: fix musl build"),
guard the code requiring FALLOC_FL_KEEP_SIZE / FALLOC_FL_PUNCH_HOLE
definitions under CONFIG_FALLOCATE_PUNCH_HOLE #ifdef'ry.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220201112655.344373-3-f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Philippe Mathieu-Daudé [Tue, 1 Feb 2022 11:26:54 +0000 (12:26 +0100)]
block/export/fuse: Rearrange if-else-if ladder in fuse_fallocate()
In order to safely maintain a mixture of #ifdef'ry with if-else-if
ladder, rearrange the last statement (!mode) first. Since it is
mutually exclusive with the other conditions, checking it first
doesn't make any logical difference, but allows to add #ifdef'ry
around in a more cleanly way.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220201112655.344373-2-f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 25 Jan 2022 15:14:35 +0000 (16:14 +0100)]
block/export: Fix vhost-user-blk shutdown with requests in flight
The vhost-user-blk export runs requests asynchronously in their own
coroutine. When the vhost connection goes away and we want to stop the
vhost-user server, we need to wait for these coroutines to stop before
we can unmap the shared memory. Otherwise, they would still access the
unmapped memory and crash.
This introduces a refcount to VuServer which is increased when spawning
a new request coroutine and decreased before the coroutine exits. The
memory is only unmapped when the refcount reaches zero.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20220125151435.48792-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Mon, 24 Jan 2022 17:37:41 +0000 (18:37 +0100)]
block: bdrv_set_backing_hd(): use drained section
Graph modifications should be done in drained section. stream_prepare()
handler of block stream job call bdrv_set_backing_hd() without using
drained section and it's theoretically possible that some IO request
will interleave with graph modification and will use outdated pointers
to removed block nodes.
Some other callers use bdrv_set_backing_hd() not caring about drained
sections too. So it seems good to make a drained section exactly in
bdrv_set_backing_hd().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <
20220124173741.
2984056-1-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 25 Jan 2022 15:15:14 +0000 (16:15 +0100)]
qemu-storage-daemon: Fix typo in vhost-user-blk help
The syntax of the fd passing case misses the "addr.type=" key. Add it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20220125151514.49035-1-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Emanuele Giuseppe Esposito [Mon, 31 Jan 2022 12:56:15 +0000 (07:56 -0500)]
block.h: remove outdated comment
The comment "disk I/O throttling" doesn't make any sense at all
any more. It was added in commit
0563e191516 to describe
bdrv_io_limits_enable()/disable(), which were removed in commit
97148076, so the comment is just a forgotten leftover.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <
20220131125615.74612-1-eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Hanna Reitz [Thu, 25 Nov 2021 13:53:17 +0000 (14:53 +0100)]
iotests/migration-permissions: New test
This test checks that a raw image in use by a virtio-blk device does not
share the WRITE permission both before and after migration.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Hanna Reitz [Thu, 25 Nov 2021 13:53:16 +0000 (14:53 +0100)]
block-backend: Retain permissions after migration
After migration, the permissions the guest device wants to impose on its
BlockBackend are stored in blk->perm and blk->shared_perm. In
blk_root_activate(), we take our permissions, but keep all shared
permissions open by calling `blk_set_perm(blk->perm, BLK_PERM_ALL)`.
Only afterwards (immediately or later, depending on the runstate) do we
restrict the shared permissions by calling
`blk_set_perm(blk->perm, blk->shared_perm)`. Unfortunately, our first
call with shared_perm=BLK_PERM_ALL has overwritten blk->shared_perm to
be BLK_PERM_ALL, so this is a no-op and the set of shared permissions is
not restricted.
Fix this bug by saving the set of shared permissions before invoking
blk_set_perm() with BLK_PERM_ALL and restoring it afterwards.
Fixes:
5f7772c4d0cf32f4e779fcd5a69ae4dae24aeebf
("block-backend: Defer shared_perm tightening migration
completion")
Reported-by: Peng Liang <liangpeng10@huawei.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20211125135317.186576-2-hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Peng Liang <liangpeng10@huawei.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:44 +0000 (17:01 +0100)]
iotests: declare lack of support for compresion_type in IMGOPTS
compression_type can't be used if we want to create image with
compat=0.10. So, skip these tests, not many of them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-20-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:43 +0000 (17:01 +0100)]
iotest 214: explicit compression type
The test-case "Corrupted size field in compressed cluster descriptor"
heavily depends on zlib compression type. So, make it explicit. This
way test passes with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-19-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:42 +0000 (17:01 +0100)]
iotests 60: more accurate set dirty bit in qcow2 header
Don't touch other incompatible bits, like compression-type. This makes
the test pass with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-18-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:41 +0000 (17:01 +0100)]
iotests: bash tests: filter compression type
We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.
Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type), so implement
specific option for it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:40 +0000 (17:01 +0100)]
iotest 39: use _qcow2_dump_header
_qcow2_dump_header has filter for compression type, so this change
makes test pass with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-16-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:39 +0000 (17:01 +0100)]
iotests: massive use _qcow2_dump_header
We are going to add filtering in _qcow2_dump_header and want all tests
use it.
The patch is generated by commands:
cd tests/qemu-iotests
sed -ie 's/$PYTHON qcow2.py "$TEST_IMG" dump-header\($\| \)/_qcow2_dump_header\1/' ??? tests/*
(the difficulty is to avoid converting dump-header-exts)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-15-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:38 +0000 (17:01 +0100)]
iotests/common.rc: introduce _qcow2_dump_header helper
We'll use it in tests instead of explicit qcow2.py. Then we are going
to add some filtering in _qcow2_dump_header.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:37 +0000 (17:01 +0100)]
qcow2: simple case support for downgrading of qcow2 images with zstd
If image doesn't have any compressed cluster we can easily switch to
zlib compression, which may allow to downgrade the image.
That's mostly needed to support IMGOPTS='compression_type=zstd' in some
iotests which do qcow2 downgrade.
While being here also fix checkpatch complain against '#' in printf
formatting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:36 +0000 (17:01 +0100)]
iotest 302: use img_info_log() helper
Instead of qemu_img_log("info", ..) use generic helper img_info_log().
img_info_log() has smarter logic. For example it use filter_img_info()
to filter output, which in turns filter a compression type. So it will
help us in future when we implement a possibility to use zstd
compression by default (with help of some runtime config file or maybe
build option). For now to test you should recompile qemu with a small
addition into block/qcow2.c before
"if (qcow2_opts->has_compression_type":
if (!qcow2_opts->has_compression_type && version >= 3) {
qcow2_opts->has_compression_type = true;
qcow2_opts->compression_type = QCOW2_COMPRESSION_TYPE_ZSTD;
}
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-12-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:35 +0000 (17:01 +0100)]
iotests.py: filter compression type out
We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.
Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type) and it's in bash.
So for now we can safely filter out compression type in all qcow2
tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:34 +0000 (17:01 +0100)]
iotests.py: filter out successful output of qemu-img create
The only "feature" of this "Formatting ..." line is that we have to
update it every time we add new option. Let's drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:33 +0000 (17:01 +0100)]
iotest 065: explicit compression type
The test checks different options. It of course fails if set
IMGOPTS='compression_type=zstd'. So, let's be explicit in what
compression type we want and independent of IMGOPTS. Test both existing
compression types.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:32 +0000 (17:01 +0100)]
iotest 303: explicit compression type
The test prints qcow2 header fields which depends on chosen compression
type. So, let's be explicit in what compression type we want and
independent of IMGOPTS. Test both existing compression types.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-8-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:31 +0000 (17:01 +0100)]
iotests.py: rewrite default luks support in qemu_img
Move the logic to more generic qemu_img_pipe_and_status(). Also behave
better when we have several -o options. And reuse argument parser of
course.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:30 +0000 (17:01 +0100)]
iotests: drop qemu_img_verbose() helper
qemu_img_verbose() has a drawback of not going through generic
qemu_img_pipe_and_status(). qemu_img_verbose() is not very popular, so
update the only two users to qemu_img_log() and drop qemu_img_verbose()
at all.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:29 +0000 (17:01 +0100)]
iotests.py: qemu_img*("create"): support IMGOPTS='compression_type=zstd'
Adding support of IMGOPTS (like in bash tests) allows user to pass a
lot of different options. Still, some may require additional logic.
Now we want compression_type option, so add some smart logic around it:
ignore compression_type=zstd in IMGOPTS, if test want qcow2 in
compatibility mode. As well, ignore compression_type for non-qcow2
formats.
Note that we may instead add support only to qemu_img_create(), but
that works bad:
1. We'll have to update a lot of tests to use qemu_img_create instead
of qemu_img('create'). (still, we may want do it anyway, but no
reason to create a dependancy between task of supporting IMGOPTS and
updating a lot of tests)
2. Some tests use qemu_img_pipe('create', ..) - even more work on
updating
3. Even if we update all tests to go through qemu_img_create, we'll
need a way to avoid creating new tests using qemu_img*('create') -
add assertions.. That doesn't seem good.
So, let's add support of IMGOPTS to most generic
qemu_img_pipe_and_status().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:28 +0000 (17:01 +0100)]
iotests: specify some unsupported_imgopts for python iotests
We are going to support IMGOPTS for python iotests. Still some iotests
will not work with common IMGOPTS used with bash iotests like
specifying refcount_bits and compat qcow2 options. So we
should define corresponding unsupported_imgopts for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <
20211223160144.
1097696-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:27 +0000 (17:01 +0100)]
iotests.py: implement unsupported_imgopts
We are going to support some addition IMGOPTS in python iotests like
in bash iotests. Similarly to bash iotests, we want a way to skip some
tests which can't work with specific IMGOPTS.
Globally for python iotests we will not support things like
'data_file=$TEST_IMG.ext_data_file' in IMGOPTS, so, forbid this
globally in iotests.py.
Suggested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 23 Dec 2021 16:01:26 +0000 (17:01 +0100)]
iotests.py: img_info_log(): rename imgopts argument
We are going to support IMGOPTS environment variable like in bash
tests. Corresponding global variable in iotests.py should be called
imgopts. So to not interfere with function argument, rename it in
advance.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <
20211223160144.
1097696-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Hanna Reitz [Thu, 23 Dec 2021 16:53:08 +0000 (17:53 +0100)]
iotests/MRCE: Write data to source
This test assumes that mirror flushes the source when entering the READY
state, and that the format level will pass that flush on to the protocol
level (where we intercept it with blkdebug).
However, apparently that does not happen when using a VMDK image with
zeroed_grain=on, which actually is the default set by testenv.py. Right
now, Python tests ignore IMGOPTS, though, so this has no effect; but
Vladimir has a series that will change this, so we need to fix this test
before that series lands.
We can fix it by writing data to the source before we start the mirror
job; apparently that makes the (VMDK) format layer change its mind and
pass on the pre-READY flush to the protocol level, so the test passes
again. (I presume, without any data written, mirror just does a 64M
zero write on the target, which VMDK with zeroed_grain=on basically just
ignores.)
Without this, we do not get a flush, and so blkdebug only sees a single
flush at the end of the job instead of two, and therefore does not
inject an error, which makes the block job complete instead of raising
an error.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20211223165308.103793-1-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Thomas Huth [Mon, 6 Dec 2021 14:34:04 +0000 (15:34 +0100)]
tests/qemu-iotests: Fix 051 for binaries without 'lsi53c895a'
The lsi53c895a SCSI adaptor might not be enabled in each and every
x86 QEMU binary, e.g. it's disabled in the RHEL/CentOS build.
Thus let's add a check to the 051 test so that it does not fail if
this device is not available.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20211206143404.247032-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Peter Maydell [Mon, 31 Jan 2022 20:20:54 +0000 (20:20 +0000)]
Merge remote-tracking branch 'remotes/bsdimp/tags/bsd-user-arm-2022q1-pull-request' into staging
bsd-user: upstream signal implementation
Upstream the bsd-user fork signal implementation, for the most part. This
series of commits represents nearly all of the infrastructure that surround
signals, except the actual system call glue (that was also reworked in the
fork and needs its own series). In addition, this adds the sigsegv and sigbus
code to arm. Even in the fork, we don't have good x86 signal implementation,
so there's little to upstream for that at the moment.
bsd-user's signal implementation is similar to linux-user's. The full context
can be found in the bsd-user's fork's 'blitz branch' at
https://github.com/qemu-bsd-user/qemu-bsd-user/tree/blitz which shows how these
are used to implement various system calls. Since this was built from
linux-user's stack stuff, evolved for BSD with the passage of a few years, it
no-doubt missed some bug fixes from linux-user (though nothing obvious stood out
in the quick comparison I made). After the first round of reviews, many of these
improvements have been incorporated.
Patchew history: https://patchew.org/QEMU/
20220125012947.14974-1-imp@bsdimp.com/
# gpg: Signature made Mon 31 Jan 2022 19:55:51 GMT
# gpg: using RSA key
2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* remotes/bsdimp/tags/bsd-user-arm-2022q1-pull-request: (40 commits)
bsd-user/freebsd/target_os_ucontext.h: Prefer env as arg name for CPUArchState args
bsd-user: Rename arg name for target_cpu_reset to env
MAINTAINERS: Add tests/vm/*bsd to the list to get reviews on
bsd-user/signal.c: do_sigaltstack
bsd-user/signal.c: implement do_sigaction
bsd-user/signal.c: implement do_sigreturn
bsd-user/signal.c: process_pending_signals
bsd-user/signal.c: tswap_siginfo
bsd-user/signal.c: handle_pending_signal
bsd-user/signal.c: setup_frame
bsd-user/signal.c: sigset manipulation routines.
bsd-user/signal.c: Fill in queue_signal
bsd-user/signal.c: Implement dump_core_and_abort
bsd-user/strace.c: print_taken_signal
bsd-user/signal.c: Implement host_signal_handler
bsd-user/signal.c: Implement rewind_if_in_safe_syscall
bsd-user/signal.c: host_to_target_siginfo_noswap
bsd-user: Add trace events for bsd-user
bsd-user: Add host signals to the build
bsd-user/host/x86_64/host-signal.h: Implement host_signal_*
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 31 Jan 2022 11:10:07 +0000 (11:10 +0000)]
Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-
20220130' into staging
ppc 7.0 queue:
* Exception and TLB fixes for the 405 CPU (Fabiano and Cedric)
* spapr fixes (Alexey and Daniel)
* PowerNV PHB3/4 fixes (Frederic and Daniel)
* PowerNV XIVE improvements (Cedric)
* 603 CPUs fixes (Christophe)
* Book-E exception fixes (Vitaly)
* Misc compile issues (Philippe and Fabiano)
* Exception model rework for the BookS CPUs (Fabiano)
* Exception model rework for the 74xx CPUs (Fabiano)
* Removal of 602 CPUs
# gpg: Signature made Sun 30 Jan 2022 17:42:23 GMT
# gpg: using RSA key
A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-ppc-
20220130: (41 commits)
target/ppc: Remove support for the PowerPC 602 CPU
target/ppc: 74xx: Set SRRs directly in exception code
target/ppc: 74xx: System Reset interrupt cleanup
target/ppc: 74xx: System Call exception cleanup
target/ppc: 74xx: Program exception cleanup
target/ppc: 74xx: External interrupt cleanup
target/ppc: 74xx: Machine Check exception cleanup
target/ppc: Simplify powerpc_excp_74xx
target/ppc: Introduce powerpc_excp_74xx
target/ppc: books: Program exception cleanup
target/ppc: books: External interrupt cleanup
target/ppc: books: Machine Check exception cleanup
target/ppc: Simplify powerpc_excp_books
target/ppc: Introduce powerpc_excp_books
target/ppc: 405: Watchdog timer exception cleanup
target/ppc: 405: Program exception cleanup
target/ppc: 405: Instruction storage interrupt cleanup
target/ppc: 405: Data Storage exception cleanup
target/ppc: 405: Debug exception cleanup
target/ppc: 405: Alignment exception cleanup
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Warner Losh [Mon, 24 Jan 2022 22:23:13 +0000 (15:23 -0700)]
bsd-user/freebsd/target_os_ucontext.h: Prefer env as arg name for CPUArchState args
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Mon, 24 Jan 2022 22:14:04 +0000 (15:14 -0700)]
bsd-user: Rename arg name for target_cpu_reset to env
Rename the parameter name for target_cpu_reset's CPUArchState * arg from
cpu to env.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 18:50:24 +0000 (11:50 -0700)]
MAINTAINERS: Add tests/vm/*bsd to the list to get reviews on
tests/vm/*bsd (especailly tests/vm/freebsd) are adjacent to the bsd-user
stuff and we're keen on keeping them working as well.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 07:06:56 +0000 (00:06 -0700)]
bsd-user/signal.c: do_sigaltstack
Implement the meat of the sigaltstack(2) system call with do_sigaltstack.
With that, all the stubbed out routines are complete, so remove
now-incorrect comment.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 06:59:42 +0000 (23:59 -0700)]
bsd-user/signal.c: implement do_sigaction
Implement the meat of the sigaction(2) system call with do_sigaction and
helper routiner block_signals (which is also used to implemement signal
masking so it's global).
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 06:48:12 +0000 (23:48 -0700)]
bsd-user/signal.c: implement do_sigreturn
Implements the meat of a sigreturn(2) system call via do_sigreturn, and
helper reset_signal_mask. Fix the prototype of do_sigreturn in qemu.h
and remove do_rt_sigreturn since it's linux only.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Sun, 30 Jan 2022 10:00:28 +0000 (10:00 +0000)]
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2022-01-28' into staging
nbd patches for 2022-01-28
- Hanna Reitz: regression fix for block status caching
- Philippe Mathieu-Daude: documentation formatting
- Nir Soffer: dead code removal
# gpg: Signature made Fri 28 Jan 2022 22:58:50 GMT
# gpg: using RSA key
71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2022-01-28:
iotests/block-status-cache: New test
block/io: Update BSC only if want_zero is true
qapi/block: Cosmetic change in BlockExportType schema
nbd/server.c: Remove unused field
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Sat, 29 Jan 2022 15:55:54 +0000 (15:55 +0000)]
Merge remote-tracking branch 'remotes/quintela-gitlab/tags/migration-
20220128-pull-request' into staging
Migration Pull request (Take 2)
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
# gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT
# gpg: using RSA key
1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/quintela-gitlab/tags/migration-
20220128-pull-request: (36 commits)
migration: Move temp page setup and cleanup into separate functions
migration: Simplify unqueue_page()
migration: Add postcopy_has_request()
migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
migration: No off-by-one for pss->page update in host page size
migration: Tally pre-copy, downtime and post-copy bytes independently
migration: Introduce ram_transferred_add()
migration: Don't return for postcopy_send_discard_bm_ram()
migration: Drop return code for disgard ram process
migration: Do chunk page in postcopy_each_ram_send_discard()
migration: Drop postcopy_chunk_hostpages()
migration: Don't return for postcopy_chunk_hostpages()
migration: Drop dead code of ram_debug_dump_bitmap()
migration/ram: clean up unused comment.
migration: Report the error returned when save_live_iterate fails
migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished
migration/migration.c: Avoid COLO boot in postcopy migration
migration/migration.c: Add missed default error handler for migration state
Remove unnecessary minimum_version_id_old fields
multifd: Rename pages_used to normal_pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hanna Reitz [Tue, 18 Jan 2022 17:00:00 +0000 (18:00 +0100)]
iotests/block-status-cache: New test
Add a new test to verify that want_zero=false block-status calls do not
pollute the block-status cache for want_zero=true calls.
We check want_zero=true calls and their results using `qemu-img map`
(over NBD), and want_zero=false calls also using `qemu-img map` over
NBD, but using the qemu:allocation-depth context.
(This test case cannot be integrated into nbd-qemu-allocation, because
that is a qcow2 test, and this is a raw test.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20220118170000.49423-3-hreitz@redhat.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Warner Losh [Sun, 9 Jan 2022 04:52:26 +0000 (21:52 -0700)]
bsd-user/signal.c: process_pending_signals
Process the currently queued signals.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 04:48:25 +0000 (21:48 -0700)]
bsd-user/signal.c: tswap_siginfo
Convert siginfo from targer to host.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 04:46:07 +0000 (21:46 -0700)]
bsd-user/signal.c: handle_pending_signal
Handle a queued signal.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 04:40:28 +0000 (21:40 -0700)]
bsd-user/signal.c: setup_frame
setup_frame sets up a signalled stack frame. Associated routines to
extract the pointer to the stack frame and to support alternate stacks.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 04:24:18 +0000 (21:24 -0700)]
bsd-user/signal.c: sigset manipulation routines.
target_sigemptyset: resets a set to having no bits set
target_sigaddset: adds a signal to a set
target_sigismember: returns true when signal is a member
host_to_target_sigset_internal: convert host sigset to target
host_to_target_sigset: convert host sigset to target
target_to_host_sigset_internal: convert target sigset to host
target_to_host_sigset: convert target sigset to host
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 04:15:11 +0000 (21:15 -0700)]
bsd-user/signal.c: Fill in queue_signal
Fill in queue signal implementation, as well as routines allocate and
delete elements of the signal queue.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 04:05:20 +0000 (21:05 -0700)]
bsd-user/signal.c: Implement dump_core_and_abort
Force delivering a signal and generating a core file. It's a global
function for the moment...
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 03:04:18 +0000 (20:04 -0700)]
bsd-user/strace.c: print_taken_signal
print_taken_signal() prints signals when we're tracing signals.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 00:57:34 +0000 (17:57 -0700)]
bsd-user/signal.c: Implement host_signal_handler
Implement host_signal_handler to handle signals generated by the host
and to do safe system calls.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 00:55:56 +0000 (17:55 -0700)]
bsd-user/signal.c: Implement rewind_if_in_safe_syscall
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 00:50:38 +0000 (17:50 -0700)]
bsd-user/signal.c: host_to_target_siginfo_noswap
Implement conversion of host to target siginfo.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 00:37:23 +0000 (17:37 -0700)]
bsd-user: Add trace events for bsd-user
Add the bsd-user specific events and infrastructure. Only include the
linux-user trace events for linux-user, not bsd-user.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 00:27:34 +0000 (17:27 -0700)]
bsd-user: Add host signals to the build
Start to add the host signal functionality to the build.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Hanna Reitz [Tue, 18 Jan 2022 16:59:59 +0000 (17:59 +0100)]
block/io: Update BSC only if want_zero is true
We update the block-status cache whenever we get new information from a
bdrv_co_block_status() call to the block driver. However, if we have
passed want_zero=false to that call, it may flag areas containing zeroes
as data, and so we would update the block-status cache with wrong
information.
Therefore, we should not update the cache with want_zero=false.
Reported-by: Nir Soffer <nsoffer@redhat.com>
Fixes:
0bc329fbb00 ("block: block-status cache for data regions")
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <
20220118170000.49423-2-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Warner Losh [Sun, 9 Jan 2022 00:15:57 +0000 (17:15 -0700)]
bsd-user/host/x86_64/host-signal.h: Implement host_signal_*
Implement host_signal_pc, host_signal_set_pc and host_signal_write for
x86_64.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 00:15:19 +0000 (17:15 -0700)]
bsd-user/host/i386/host-signal.h: Implement host_signal_*
Implement host_signal_pc, host_signal_set_pc and host_signal_write for
i386.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 9 Jan 2022 00:14:12 +0000 (17:14 -0700)]
bsd-user/host/arm/host-signal.h: Implement host_signal_*
Implement host_signal_pc, host_signal_set_pc and host_signal_write for
arm.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 16 Jan 2022 16:28:59 +0000 (09:28 -0700)]
bsd-user/signal.c: Add si_type argument to queue_signal
Mirror the linux-user practice and add a si_type argument to queue
signal. This will be transported as the upper 8 bits in the si_type
element of siginfo so that we know what bits of the structure are valid
and so we can properly implement host_to_target_siginfo_noswap and
tswap_siginfo. Adapt the one caller of queue_signal to the new
interface. Use all the same names as Linux (except _RT which we don't
treat differently, unlike Linux), though some are unused. Place this
into signal-common.h since that's a better place given bsd-user's
structure. Move prototype of queue_signal to signal-common.h to mirror
linux-user's location.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sat, 8 Jan 2022 23:57:31 +0000 (16:57 -0700)]
bsd-user/signal.c: Implement signal_init()
Initialize the signal state for the emulator. Setup a set of sane
default signal handlers, mirroring the host's signals. For fatal signals
(those that exit by default), establish our own set of signal
handlers. Stub out the actual signal handler we use for the moment.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> XXX SIGPROF PENDING
Warner Losh [Sat, 8 Jan 2022 23:48:03 +0000 (16:48 -0700)]
bsd-user/signal.c: implement abstract target / host signal translation
Implement host_to_target_signal and target_to_host_signal.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sat, 8 Jan 2022 23:26:55 +0000 (16:26 -0700)]
bsd-user/arm/target_arch_cpu.h: Implement data faults
Update for the richer set of data faults that are now possible. Copied
largely from linux-user/arm/cpu_loop.c, with minor typo fixes.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sat, 8 Jan 2022 23:22:16 +0000 (16:22 -0700)]
bsd-user/arm/target_arch_cpu.h: Use force_sig_fault for EXCP_UDEF
Use force_sig_fault to implement unknown opcode. This just uninlines
that function, so simplify things by using it. Fold in EXCP_NOCP and
EXCP_INVSTATE, as is done in linux-user. Make a note about slight
differences with FreeBSD in case any of them turn out to be important
later.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sat, 8 Jan 2022 23:14:04 +0000 (16:14 -0700)]
bsd-user/arm/target_arch_cpu.h: Correct code pointer
The code has moved in FreeBSD since the emulator was started, update the
comment to reflect that change.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sat, 8 Jan 2022 23:11:15 +0000 (16:11 -0700)]
bsd-user/arm/arget_arch_cpu.h: Move EXCP_DEBUG and EXCP_BKPT together
Implement EXCP_DEBUG and EXCP_BKPT the same, as is done in
linux-user. The prior adjustment of register 15 isn't needed, so remove
that. Remove a redunant comment (that code in FreeBSD never handled
break points). It's unclear why BKPT was an alias for system calls,
but FreeBSD doesn't do that today.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sat, 8 Jan 2022 23:06:33 +0000 (16:06 -0700)]
bsd-user/signal.c: implement cpu_loop_exit_sigbus
First attempt at implementing cpu_loop_exit_sigbus, mostly copied from
linux-user version of this function.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sat, 8 Jan 2022 23:03:51 +0000 (16:03 -0700)]
bsd-user/signal.c: Implement cpu_loop_exit_sigsegv
First attempt at implementing cpu_loop_exit_sigsegv, mostly copied from
linux-user version of this function.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Mon, 24 Jan 2022 23:11:46 +0000 (16:11 -0700)]
bsd-user/signal-common.h: Move signal functions prototypes to here
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sat, 8 Jan 2022 22:58:34 +0000 (15:58 -0700)]
bsd-user/signal.c: implement force_sig_fault
Start to implement the force_sig_fault code. This currently just calls
queue_signal(). The bsd-user fork version of that will handle this the
synchronous nature of this call. Add signal-common.h to hold signal
helper functions like force_sig_fault.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sat, 8 Jan 2022 22:41:10 +0000 (15:41 -0700)]
bsd-user/arm/target_arch_cpu.h: Move EXCP_ATOMIC to match linux-user
Move the EXCP_ATOMIC case to match linux-user/arm/cpu_loop.c:cpu_loop
ordering.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 16 Jan 2022 23:33:21 +0000 (16:33 -0700)]
bsd-user: Bring in docs from linux-user for signal_pending
This is currently unused, so no code adjustments are needed.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Sun, 16 Jan 2022 23:14:18 +0000 (16:14 -0700)]
bsd-user: Remove vestiges of signal queueing code
bsd-user was copied from linux-user at a time when it queued
signals. Remove those vestiges of thse code. Retain the init function,
even though it's now empty since other stuff will likely be added
there. Make it static since it's not called from outside of main.c
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Mon, 24 Jan 2022 08:29:53 +0000 (01:29 -0700)]
bsd-user/arm/signal.c: get_mcontext should zero vfp data
FreeBSD's get_mcontext doesn't return any vfp data. Instead, it zeros
out the vfp feilds (and all the spare fields). Impelement this
behavior. We're still missing the sysarch(ARM_GET_VFPCONTEXT) syscall,
though.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Wed, 19 Jan 2022 18:49:05 +0000 (11:49 -0700)]
bsd-user/arm/signal.c: Implement setup_sigframe_arch for arm
Fix the broken context setting for arm. FreeBSD's get_mcontext does not
fill in the vfp info. It's filled in in sigframe(). This corresponds to
the new setup_sigframe_arch which fills in mcontext, then adjusts it to
point to the vfp context in the sigframe and fills in that context as
well. Add pointer to where this code is done.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Wed, 19 Jan 2022 18:46:05 +0000 (11:46 -0700)]
bsd-user: Create setup_sigframe_arch to setup sigframe context
Define setup_sigframe_arch whose job it is to setup the mcontext for the
sigframe. Implement for x86 to just call mcontext.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Warner Losh [Mon, 24 Jan 2022 08:33:02 +0000 (01:33 -0700)]
bsd-user: Complete FreeBSD siginfo
Fill in the missing FreeBSD siginfo fields, and add some comments.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daude [Wed, 19 Jan 2022 12:14:39 +0000 (13:14 +0100)]
qapi/block: Cosmetic change in BlockExportType schema
Fix long line introduced in commit
bb01ea73110 ("qapi/block:
Restrict vhost-user-blk to CONFIG_VHOST_USER_BLK_SERVER").
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220119121439.214821-1-f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Nir Soffer [Tue, 11 Jan 2022 19:43:13 +0000 (21:43 +0200)]
nbd/server.c: Remove unused field
NBDRequestData struct has unused QSIMPLEQ_ENTRY field. It seems that
this field exists since the first git commit and was never used.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-Id: <
20220111194313.581486-1-nsoffer@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes:
d9a73806 ("qemu-nbd: introduce NBDRequest", v1.1)
Signed-off-by: Eric Blake <eblake@redhat.com>
Cédric Le Goater [Mon, 24 Jan 2022 17:41:30 +0000 (18:41 +0100)]
target/ppc: Remove support for the PowerPC 602 CPU
The 602 was derived from the PowerPC 603, for the gaming market it
seems. It was hardly used and no firmware supporting the CPU could be
found. Drop support.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Peter Maydell [Fri, 28 Jan 2022 16:59:56 +0000 (16:59 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20220128' into staging
target-arm queue:
* Update copyright dates to 2022
* hw/armv7m: Fix broken VMStateDescription
* hw/char/exynos4210_uart: Fix crash on trying to load VM state
* rtc: Move RTC function prototypes to their own header
* xlnx-versal-virt: Support PMC SLCR
* xlnx-versal-virt: Support OSPI flash memory controller
* scripts: Explain the difference between linux-headers and standard-headers
* target/arm: Log CPU index in 'Taking exception' log
* arm_gicv3_its: Various bugfixes and cleanups
* arm_gicv3_its: Implement the missing MOVI and MOVALL commands
* ast2600: Fix address mapping of second SPI controller
* target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
# gpg: Signature made Fri 28 Jan 2022 15:29:36 GMT
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20220128: (32 commits)
target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
hw/arm: ast2600: Fix address mapping of second SPI controller
hw/intc/arm_gicv3_its: Implement MOVI
hw/intc/arm_gicv3_its: Implement MOVALL
hw/intc/arm_gicv3_its: Check table bounds against correct limit
hw/intc/arm_gicv3_its: Make GITS_BASER<n> RAZ/WI for unimplemented registers
hw/intc/arm_gicv3_its: Provide read accessor for translation_ops
hw/intc/arm_gicv3: Set GICR_CTLR.CES if LPIs are supported
hw/intc/arm_gicv3_redist: Remove unnecessary zero checks
hw/intc/arm_gicv3_its: Sort ITS command list into numeric order
hw/intc/arm_gicv3: Honour GICD_CTLR.EnableGrp1NS for LPIs
hw/intc/arm_gicv3_its: Don't clear GITS_CWRITER on writes to GITS_CBASER
hw/intc/arm_gicv3_its: Don't clear GITS_CREADR when GITS_CTLR.ENABLED is set
hw/intc/arm_gicv3: Initialise dma_as in GIC, not ITS
hw/intc/arm_gicv3_its: Add tracepoints
target/arm: Log CPU index in 'Taking exception' log
scripts: Explain the difference between linux-headers and standard-headers
MAINTAINERS: Remove myself (for raspi).
MAINTAINERS: Add an entry for Xilinx Versal OSPI
hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Xu [Wed, 19 Jan 2022 08:09:20 +0000 (16:09 +0800)]
migration: Move temp page setup and cleanup into separate functions
Temp pages will need to grow if we want to have multiple channels for postcopy,
because each channel will need its own temp page to cache huge page data.
Before doing that, cleanup the related code. No functional change intended.
Since at it, touch up the errno handling a little bit on the setup side.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Wed, 19 Jan 2022 08:09:19 +0000 (16:09 +0800)]
migration: Simplify unqueue_page()
This patch simplifies unqueue_page() on both sides of it (itself, and caller).
Firstly, due to the fact that right after unqueue_page() returned true, we'll
definitely send a huge page (see ram_save_huge_page() call - it will _never_
exit before finish sending that huge page), so unqueue_page() does not need to
jump in small page size if huge page is enabled on the ramblock. IOW, it's
destined that only the 1st 4K page will be valid, when unqueue the 2nd+ time
we'll notice the whole huge page has already been sent anyway. Switching to
operating on huge page reduces a lot of the loops of redundant unqueue_page().
Meanwhile, drop the dirty check. It's not helpful to call test_bit() every
time to jump over clean pages, as ram_save_host_page() has already done so,
while in a faster way (see commit
ba1b7c812c ("migration/ram: Optimize
ram_save_host_page()", 2021-05-13)). So that's not necessary too.
Drop the two tracepoints along the way - based on above analysis it's very
possible that no one is really using it..
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Wed, 19 Jan 2022 08:09:18 +0000 (16:09 +0800)]
migration: Add postcopy_has_request()
Add a helper to detect whether postcopy has pending request.
Since at it, cleanup the code a bit, e.g. in unqueue_page() we shouldn't need
to check it again on queue empty because we're the only one (besides cleanup
code, which should never run during this process) that will take a request off
the list, so the request list can only grow but not shrink under the hood.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Wed, 19 Jan 2022 08:09:17 +0000 (16:09 +0800)]
migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
This patch allows us to read the tid even without blocktime feature enabled.
It's useful when tracing postcopy fault thread on faulted pages to show thread
id too with the address.
Remove the comments - they're merely not helpful at all.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Wed, 19 Jan 2022 08:09:15 +0000 (16:09 +0800)]
migration: No off-by-one for pss->page update in host page size
We used to do off-by-one fixup for pss->page when finished one host huge page
transfer. That seems to be unnecesary at all. Drop it.
Cc: Keqian Zhu <zhukeqian1@huawei.com>
Cc: Kunkun Jiang <jiangkunkun@huawei.com>
Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
David Edmondson [Tue, 21 Dec 2021 09:34:41 +0000 (09:34 +0000)]
migration: Tally pre-copy, downtime and post-copy bytes independently
Provide information on the number of bytes copied in the pre-copy,
downtime and post-copy phases of migration.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
David Edmondson [Tue, 21 Dec 2021 09:34:40 +0000 (09:34 +0000)]
migration: Introduce ram_transferred_add()
Replace direct manipulation of ram_counters.transferred with a
function.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Philippe Mathieu-Daudé [Thu, 30 Dec 2021 16:05:25 +0000 (17:05 +0100)]
migration: Don't return for postcopy_send_discard_bm_ram()
postcopy_send_discard_bm_ram() always return zero. Since it can't
fail, simplify and do not return anything.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Tue, 7 Dec 2021 11:50:14 +0000 (19:50 +0800)]
migration: Drop return code for disgard ram process
It will just never fail. Drop those return values where they're constantly
zeros.
A tiny touch-up on the tracepoint so trace_ram_postcopy_send_discard_bitmap()
is called after the logic itself (which sounds more reasonable).
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Tue, 7 Dec 2021 11:50:13 +0000 (19:50 +0800)]
migration: Do chunk page in postcopy_each_ram_send_discard()
Right now we loop ramblocks for twice, the 1st time chunk the dirty bits with
huge page information; the 2nd time we send the discard ranges. That's not
necessary - we can do them in a single loop.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Tue, 7 Dec 2021 11:50:12 +0000 (19:50 +0800)]
migration: Drop postcopy_chunk_hostpages()
This function calls three functions:
- postcopy_discard_send_init(ms, block->idstr);
- postcopy_chunk_hostpages_pass(ms, block);
- postcopy_discard_send_finish(ms);
However only the 2nd function call is meaningful. It's major role is to make
sure dirty bits are applied in host-page-size granule, so there will be no
partial dirty bits set for a whole host page if huge pages are used.
The 1st/3rd call are for latter when we want to send the disgard ranges.
They're mostly no-op here besides some tracepoints (which are misleading!).
Drop them, then we can directly drop postcopy_chunk_hostpages() as a whole
because we can call postcopy_chunk_hostpages_pass() directly.
There're still some nice comments above postcopy_chunk_hostpages() that explain
what it does. Copy it over to the caller's site.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Tue, 7 Dec 2021 11:50:11 +0000 (19:50 +0800)]
migration: Don't return for postcopy_chunk_hostpages()
It always return zero, because it just can't go wrong so far. Simplify the
code with no functional change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Xu [Tue, 7 Dec 2021 11:50:10 +0000 (19:50 +0800)]
migration: Drop dead code of ram_debug_dump_bitmap()
I planned to add "#ifdef DEBUG_POSTCOPY" around the function too because
otherwise it'll be compiled into qemu binary even if it'll never be used. Then
I found that maybe it's easier to just drop it for good..
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Xu Zheng [Mon, 17 Jan 2022 02:30:03 +0000 (10:30 +0800)]
migration/ram: clean up unused comment.
Just a removal of an unused comment.
a0a8aa147aa did many fixes and removed the parameter named "ms", but forget to remove the corresponding comment in function named "ram_save_host_page".
Signed-off-by: Xu Zheng <xuzheng@cmss.chinamobile.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>