OSDN Git Service
Maxim Levitsky [Sun, 3 May 2020 19:31:12 +0000 (22:31 +0300)]
Add initial support for Realtek ALC1220 TRX40 motherboards
Tested with TRX40 Designare but should work on most TRX40 motherboards
Tested with pulseaudio
36a4923f9bd05d4c5e2e8b1765f18edf452b9251
with fix for 8 channel mixer element applied
Tested with kernel 5.7.0-rc3
The following are the notes of the testing and implementation
* Back speaker works in 5.1 mode, becasue side channel
shares jack with line-in and by default line-in is configured.
Once jack retasking will work, it will work automatically
Same for front mic that can be retasked to line-in
* SPDIF is not tested physically yet. The SPDIF mute mixer control is recognised by
pulseaudio correctly so profile is correct.
* When all capture inputs are disconnected, pulseaudio thinks that the UCM2 profile
is invalid and doesn't use it by default. It can be forced to use it by selecting
it in the pavucontrol. Or you can for now comment out one of 'JackControl' statements,
to make it think that one of the jacks is always plugged in.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 22 Apr 2020 10:11:48 +0000 (12:11 +0200)]
ucm2: fix indentation (use tabs)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 21 Apr 2020 14:54:53 +0000 (16:54 +0200)]
ucm2: remove empty enable/disable sequence sections
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 6 Apr 2020 15:37:20 +0000 (17:37 +0200)]
sof-hda-dsp: change Headphones2 to Mic2
Fixes: https://github.com/alsa-project/alsa-ucm-conf/issues/19
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Sun, 5 Apr 2020 18:34:53 +0000 (20:34 +0200)]
chtrt5645: Remove bogus JackHWMute settings
There is no reason why the internal microphone or speakers cannot
be used when a headset is plugged in.
The jack does not physically disconnect these, so the JackHWMute settings
are wrong, remove them.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Sun, 5 Apr 2020 18:34:52 +0000 (20:34 +0200)]
chtrt5645: Add MEDION-E1239TMD60568-0.1-Wingman.conf symlink to chtrt5645-dmic2.conf
The Medion Akoya E1239T 2-in-1 uses a digital mic connected to the
dmic2 pin, rather then the default analog mic on in2.
Add a long name symlink to chtrt5645-dmic2.conf for this, so that
the right config is used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Sun, 5 Apr 2020 18:34:51 +0000 (20:34 +0200)]
chtrt5645: Add ASUSTeKCOMPUTERINC.-T100HAN-1.0 symlink to chtrt5645-dmic1.conf
We already have a ASUSTeKCOMPUTERINC.-T100HAN-1.0-T100HAN symlink to
chtrt5645-dmic1.conf, but since kernel commit
39870b0dec68 ("ASoC: DMI long
name - avoid to add board name if matches with product name"), the kernel
omits the (second) -T100HAN. So with newer kernels that no longer works.
Arguably this is a kernel regressions, but chances are we already have
some configs depending on the new behavior, so lets fix this on the
UCM2 side by adding a second symlink using the new long name.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Sun, 5 Apr 2020 18:34:50 +0000 (20:34 +0200)]
bytcr-rt5651: Fix dmic check in HiFi-Components.conf
The kernel sets cfg-mic:dmic not cfg-mic:dmic1 when a digital mic is
used. The wrong check for cfg-mic:dmic1 causes there to be no "Mic"
device at all, which causes the check for the ConflictingDevices section
of the HeadSet (mic) device to fail like e.g. so:
[hans@localhost ~]$ alsaucm -c bytcr-rt5651 set _verb HiFi set _enadev Speaker
ALSA lib parser.c:1138:(verb_dev_list_add) error: unable to find device 'Mic'
ALSA lib parser.c:1433:(parse_verb_file) error: device management error in verb 'HiFi'
ALSA lib main.c:962:(snd_use_case_mgr_open) error: failed to import bytcr-rt5651 use case configuration -2
alsaucm: error failed to open sound card bytcr-rt5651: No such file or directory
This commit fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 30 Mar 2020 14:51:45 +0000 (16:51 +0200)]
update README files
- UCM validator
- UCM paths for ucm2/
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Mateusz Gorski [Wed, 18 Mar 2020 10:26:05 +0000 (11:26 +0100)]
hda-dsp: add basic ucm config
Basic UCM configuration for Intel Skylake SST with HDA DSP generic
machine driver enabling codec playback and capture on both HDA codec
and DMIC ports.
Signed-off-by: Mateusz Gorski <mateusz.gorski@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Kai Vehmanen [Thu, 5 Mar 2020 12:59:56 +0000 (14:59 +0200)]
sof-hda-dsp: Support systems without integrated graphics audio
On systems where integrated graphics audio is not present
or is disabled, the HDMI PCM nodes are disabled. Add rules to
detect these systems by checking presence of HDMI jack controls
with UCM2 rules.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Sun, 1 Mar 2020 15:12:28 +0000 (16:12 +0100)]
ucm2: treewide - JackHWMute fixes
Fixes: https://github.com/alsa-project/alsa-ucm-conf/issues/14
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Pierre-Louis Bossart [Thu, 27 Feb 2020 18:40:20 +0000 (12:40 -0600)]
sof-bdw-rt5677: initial port to UCM2
Tested on Pixel 2015/SAMUS Chromebook.
Known limitations:
Left/Right confusion (probably a firmware issue)
PulseAudio does not switch capture devices on headset plug
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
David Ward [Sun, 9 Feb 2020 15:06:52 +0000 (10:06 -0500)]
broadwell-rt286: more conformance and other fixes
Remove JackHWMute, because the hardware does not forcibly shut off
the internal speakers or microphone when the jack is in use.
The CaptureMixerElem and CaptureMasterElem devices were swapped. Do
not manually set the "ADC0 Capture Switch" when disabling a capture
device; it will be set automatically instead.
Correct "Handset" to "Headset". Apply maximum gain to the headset
microphone ("AMIC Volume") when in use, based on testing.
Signed-off-by: David Ward <david.ward@gatech.edu>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 19 Feb 2020 09:21:04 +0000 (10:21 +0100)]
README.md: add build status badge
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 19 Feb 2020 07:59:57 +0000 (08:59 +0100)]
github: create validate workflow
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 6 Feb 2020 18:44:07 +0000 (19:44 +0100)]
ucm2: treewide - remove Playback and Capture channels=2 assignments
The value 2 is the default.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 5 Feb 2020 02:24:00 +0000 (03:24 +0100)]
sof-hda-dsp: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 5 Feb 2020 02:19:33 +0000 (03:19 +0100)]
bytcht-es8316: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 5 Feb 2020 02:13:06 +0000 (03:13 +0100)]
bytcr-rt5640: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 5 Feb 2020 01:54:11 +0000 (02:54 +0100)]
kblrt5660: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 4 Feb 2020 18:21:47 +0000 (19:21 +0100)]
PandaBoardES: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 4 Feb 2020 18:11:10 +0000 (19:11 +0100)]
PandaBoard: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 4 Feb 2020 17:58:27 +0000 (18:58 +0100)]
SDP4430: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 4 Feb 2020 17:52:18 +0000 (18:52 +0100)]
PAZ00: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 4 Feb 2020 17:48:05 +0000 (18:48 +0100)]
GoogleNyan: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 4 Feb 2020 17:44:49 +0000 (18:44 +0100)]
chtrt5645: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 4 Feb 2020 16:52:37 +0000 (17:52 +0100)]
SDP4430: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 4 Feb 2020 16:48:10 +0000 (17:48 +0100)]
VEYRON-I2S: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 28 Jan 2020 17:16:54 +0000 (18:16 +0100)]
GoogleNyan: comment CaptureControl, what is this?
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 28 Jan 2020 17:15:22 +0000 (18:15 +0100)]
broadwell-rt286: add correct prefix to Priority field names
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 28 Jan 2020 16:57:43 +0000 (17:57 +0100)]
sof-hda-dsp: fix typo (PlaybackMixerMaster -> PlaybackMasterElem)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 27 Jan 2020 15:06:25 +0000 (16:06 +0100)]
SDP4430: corrections and fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 27 Jan 2020 15:01:21 +0000 (16:01 +0100)]
skylake-rt286: fixes and corrections
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 24 Jan 2020 13:39:26 +0000 (14:39 +0100)]
chtnau8824: fixes and corrections
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 24 Jan 2020 13:35:10 +0000 (14:35 +0100)]
cht-bsw-rt5672: fixes and corrections
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 24 Jan 2020 10:06:29 +0000 (11:06 +0100)]
HDA-Intel/HiFi-dual: fixes and corrections
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 24 Jan 2020 09:15:58 +0000 (10:15 +0100)]
Dell-WD15-Dock: cleaups and corrections
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 24 Jan 2020 09:14:41 +0000 (10:14 +0100)]
DB820c: cleanups and corrections
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 24 Jan 2020 09:07:14 +0000 (10:07 +0100)]
DB410c: cleanups and corrections
Jaroslav Kysela [Thu, 23 Jan 2020 18:56:19 +0000 (19:56 +0100)]
DAISY-I2S: added back PCM devices
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 23 Jan 2020 18:53:52 +0000 (19:53 +0100)]
bytcht-es8316: cleanups and corrections
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 23 Jan 2020 18:45:00 +0000 (19:45 +0100)]
bytcht-cx2072x: cleanups and corrections
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 23 Jan 2020 18:39:08 +0000 (19:39 +0100)]
bytcr-rt5651: cleanups and corrections
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 23 Jan 2020 18:03:53 +0000 (19:03 +0100)]
bytcr-rt5640: cleanups and corrections
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 23 Jan 2020 13:13:10 +0000 (14:13 +0100)]
broxton-rt298: corrections, cleanups
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 10 Dec 2019 16:08:37 +0000 (17:08 +0100)]
broadwell-rt286: add support for hardware volume, conformance fixes
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 13 Jan 2020 12:36:55 +0000 (13:36 +0100)]
ucm2: fix the verb path in chtrt5645/chtrt5645-dmic2.conf
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Mon, 6 Jan 2020 13:11:59 +0000 (14:11 +0100)]
bytcht-es8316: Fix missing including of HeadPhones.conf after ucm2 conversion
The conversion to ucm2 format missed adding an include for:
codecs/es8316/HeadPhones.conf
Leading to no sound on the headphones output, this commit adds the missing
include fixing this.
Cc: youling 257 <youling257@gmail.com>
Reported-by: youling 257 <youling257@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 6 Dec 2019 10:15:37 +0000 (11:15 +0100)]
README: remove topologies note
Jaroslav Kysela [Fri, 6 Dec 2019 10:12:39 +0000 (11:12 +0100)]
sof-hda-dsp: Use more strict names according latest use-case.h
Also remove ConflictinDevice section from the digital microphone.
Those paths are independent.
BugLink: https://github.com/alsa-project/alsa-ucm-conf/pull/7
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 5 Dec 2019 16:46:53 +0000 (17:46 +0100)]
sof-hda-dsp: Fix the Dmic0 CaptureMixerElem for v1.4.1 firmware
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 29 Nov 2019 15:33:52 +0000 (16:33 +0100)]
ucm2: remove the old SectionDevice syntax (additional .0)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 29 Nov 2019 15:24:44 +0000 (16:24 +0100)]
ucm2: change 'Headphone' to 'Headphones'
It is more correct name and it is listed in use-case.h.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Fri, 29 Nov 2019 08:40:35 +0000 (09:40 +0100)]
sof-hda-dsp: Use more strict check for Input Source (ControlEnum)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 28 Nov 2019 18:21:47 +0000 (19:21 +0100)]
sof-hda-dsp: use CardComponents to detect the four digital microphones
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 28 Nov 2019 18:21:04 +0000 (19:21 +0100)]
sof-hda-dsp: fix the default verbs
- do not set 'Capture Switch', it should be handled by the app
- disable the 'Auto-Mute Mode' in the driver
- remove JackHWMute for speaker, it is no longer valid
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 28 Nov 2019 17:23:23 +0000 (18:23 +0100)]
sof-hda-dsp: add priority values
From: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 28 Nov 2019 16:37:47 +0000 (17:37 +0100)]
sof-hda-dsp: add support for mono microphone (HeadphoneMic = stereo, HeadsetMic = mono)
Idea-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 28 Nov 2019 16:04:21 +0000 (17:04 +0100)]
sof-hda-dsp: Return back HDMI devices to the HiFi verb
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 28 Nov 2019 16:01:50 +0000 (17:01 +0100)]
sof-hda-dsp: remove standalone Bass Speaker, fix mixer values
Use the mixer values MixerElem and MasterElem by the latest use-case.h.
Merge the Bass Speaker to Speaker. The standalone Speaker is unusable
on Lenovo Carbon X1 7th gen.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 28 Nov 2019 15:43:43 +0000 (16:43 +0100)]
treewide: Remove OutputDspName values
Those values are not defined in use-case.h.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 28 Nov 2019 15:40:09 +0000 (16:40 +0100)]
treewide: Remove JackName, JackType and JackSwitch values
Those values are not defined in use-case.h.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Sat, 23 Nov 2019 14:44:19 +0000 (15:44 +0100)]
sof-hda-dsp: rename PlaybackMixerId to PlaybackMixerID (per use-case.h)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 14:02:20 +0000 (15:02 +0100)]
SDP4430: fix ${CardID} -> ${CardId} typo
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 14:01:17 +0000 (15:01 +0100)]
PAZ00: remove extra cdev
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 14:00:18 +0000 (15:00 +0100)]
DB820c: fix HDMI.conf (remove cdev and fix PCM devices)
Jaroslav Kysela [Thu, 21 Nov 2019 13:57:19 +0000 (14:57 +0100)]
skylake-rt286: adapt more to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 13:14:08 +0000 (14:14 +0100)]
chtrt5645: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 13:05:23 +0000 (14:05 +0100)]
chtrt5650: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 12:56:40 +0000 (13:56 +0100)]
cht-bsw-rt5672: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 12:51:58 +0000 (13:51 +0100)]
cht-bsw-rt5672: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 12:36:50 +0000 (13:36 +0100)]
bytcht-cx2072x: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 12:23:40 +0000 (13:23 +0100)]
tegraalc5632: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 07:04:55 +0000 (08:04 +0100)]
chtnau8824: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 20 Nov 2019 19:58:24 +0000 (20:58 +0100)]
kblrt5660: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 20 Nov 2019 18:32:56 +0000 (19:32 +0100)]
bytcht-es8316: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 20 Nov 2019 17:59:00 +0000 (18:59 +0100)]
bytcr-rt5651: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 19 Nov 2019 20:19:39 +0000 (21:19 +0100)]
bytcr-rt5640: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 13:39:55 +0000 (14:39 +0100)]
platform/bytcr: move to ucm2 tree
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 21 Nov 2019 07:20:37 +0000 (08:20 +0100)]
ucm2: move HDAudio-*DualCodecs configs to the right card name directory
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Thu, 14 Nov 2019 17:03:15 +0000 (18:03 +0100)]
sof-hda-dsp: add MixerId values, change order for BassSpeaker
- do not set the speaker volume for the BassSpeaker
- do not set ConflictingDevice for HeadphoneMic
(one way should be enough in DigitalMic)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 11 Nov 2019 12:01:48 +0000 (13:01 +0100)]
add ucm/README.md and ucm2/README.md
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 11 Nov 2019 11:55:53 +0000 (12:55 +0100)]
VEYRON-I2S: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 11 Nov 2019 11:45:17 +0000 (12:45 +0100)]
skylake-rt286: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 11 Nov 2019 11:40:48 +0000 (12:40 +0100)]
SDP4430: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 11 Nov 2019 11:36:02 +0000 (12:36 +0100)]
PAZ00: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 11 Nov 2019 07:58:15 +0000 (08:58 +0100)]
PandaBoardES: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 11 Nov 2019 07:53:41 +0000 (08:53 +0100)]
PandaBoard: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 11 Nov 2019 07:47:44 +0000 (08:47 +0100)]
HDAudio-Lenovo-DualCodecs: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Mon, 11 Nov 2019 07:46:33 +0000 (08:46 +0100)]
HDAudio-Gigabyte-ALC1220DualCodecs: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Sun, 10 Nov 2019 20:14:46 +0000 (21:14 +0100)]
GoogleNyan: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Sun, 10 Nov 2019 20:12:53 +0000 (21:12 +0100)]
Dell-WD15-Dock: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Sun, 10 Nov 2019 20:07:36 +0000 (21:07 +0100)]
DB820c: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Sun, 10 Nov 2019 20:02:24 +0000 (21:02 +0100)]
DB410c: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Sun, 10 Nov 2019 19:56:23 +0000 (20:56 +0100)]
DAISY-I2S: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Sun, 10 Nov 2019 19:28:23 +0000 (20:28 +0100)]
broxton-rt298: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Sun, 10 Nov 2019 19:23:30 +0000 (20:23 +0100)]
broadwell-rt286: adapt to ucm2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Tue, 5 Nov 2019 19:09:21 +0000 (20:09 +0100)]
sof-hda-dsp: adapt to latest alsa-lib
- move to ucm2
- add 'Syntax 2' to the main configuration files
- use condition for 'Headphone Jack' / 'Headphone Mic Jack' selection
- remove cdev (not required)
- use ${CardId} where appropriate
- merge config for Lenovo Carbon X1 7th gen to main HiFi.conf
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Jaroslav Kysela [Wed, 6 Nov 2019 11:56:57 +0000 (12:56 +0100)]
sof-hda-dsp: the JackHWMute definition should be in the Headphone device
Signed-off-by: Jaroslav Kysela <perex@perex.cz>