OSDN Git Service
Jian Zhang [Tue, 12 Jul 2022 04:56:11 +0000 (13:56 +0900)]
drm/exynos/exynos7_drm_decon: free resources when clk_set_parent() failed.
In exynos7_decon_resume, When it fails, we must use clk_disable_unprepare()
to free resource that have been used.
Fixes:
6f83d20838c09 ("drm/exynos: use DRM_DEV_ERROR to print out error
message")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jian Zhang <zhangjian210@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Krzysztof Kozlowski [Fri, 1 Jul 2022 00:31:23 +0000 (09:31 +0900)]
dt-bindings: remove Joonyoung Shim from maintainers
Emails to Joonyoung Shim bounce ("550 5.1.1 Recipient address rejected:
User unknown"), so remove him from maintainers of DT bindings (display,
phy).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Krzysztof Kozlowski [Thu, 30 Jun 2022 04:12:17 +0000 (13:12 +0900)]
drm/exynos: MAINTAINERS: move Joonyoung Shim to credits
Emails to Joonyoung Shim bounce ("550 5.1.1 Recipient address rejected:
User unknown"), so move him to credits file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Dave Airlie [Fri, 1 Jul 2022 04:14:52 +0000 (14:14 +1000)]
Merge tag 'drm-intel-gt-next-2022-06-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Expose per tile media freq factor in sysfs (Ashutosh Dixit, Dale B Stimson)
- Document memory residency and Flat-CCS capability of obj (Ramalingam C)
- Disable GETPARAM lookups of I915_PARAM_[SUB]SLICE_MASK on Xe_HP+ (Matt Roper)
Cross-subsystem Changes:
- Rename intel-gtt symbols (Lucas De Marchi)
Core Changes:
Driver Changes:
- Support programming the EU priority in the GuC descriptor (DG2) (Matthew Brost)
- DG2 HuC loading support (Daniele Ceraolo Spurio)
- Fix build error without CONFIG_PM (YueHaibing)
- Enable THP on Icelake and beyond (Tvrtko Ursulin)
- Only setup private tmpfs mount when needed and fix logging (Tvrtko Ursulin)
- Make __guc_reset_context aware of guilty engines (Umesh Nerlige Ramappa)
- DG2 small bar memory probing fixes (Nirmoy Das)
- Remove unnecessary GuC err capture noise (Alan Previn)
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms (Maarten Lankhorst)
- Fix undefined behavior in GuC backend due to shift overflowing the constant (Borislav Petkov)
- New DG2 workarounds (Swathi Dhanavanthri, Anshuman Gupta)
- Report no hwconfig support on ADL-N (Balasubramani Vivekanandan)
- Fix error_state_read ptr + offset use (Alan Previn)
- Expose per tile media freq factor in sysfs (Ashutosh Dixit, Dale B Stimson)
- Fix memory leaks in per-gt sysfs (Ashutosh Dixit)
- Fix dma_resv fence handling in multi-batch execbuf (Nirmoy Das)
- Add extra registers to GPU error dump on Gen11+ (Stuart Summers)
- More PVC+DG2 workarounds (Matt Roper)
- Improve user experience and driver robustness under SIGINT or similar (Tvrtko Ursulin)
- Don't show engine classes not present (Tvrtko Ursulin)
- Improve on suspend / resume time with VT-d enabled (Thomas Hellström)
- Add missing else (katrinzhou)
- Don't leak lmem mapping in vma_evict (Juha-Pekka Heikkila)
- Add smem fallback allocation for dpt (Juha-Pekka Heikkila)
- Tweak the ordering in cpu_write_needs_clflush (Matthew Auld)
- Do not access rq->engine without a reference (Niranjana Vishwanathapura)
- Revert "drm/i915: Hold reference to intel_context over life of i915_request" (Niranjana Vishwanathapura)
- Don't update engine busyness stats too frequently (Alan Previn)
- Add additional steps for Wa_22011802037 for execlist backend (Umesh Nerlige Ramappa)
- Fix a lockdep warning at error capture (Nirmoy Das)
- Ponte Vecchio prep work and new blitter engines (Matt Roper, John Harrison, Lucas De Marchi)
- Read correct RP_STATE_CAP register (PVC) (Matt Roper)
- Define MOCS table for PVC (Ayaz A Siddiqui)
- Driver refactor and support Ponte Vecchio forcewake handling (Matt Roper)
- Remove additional 3D flags from PIPE_CONTROL (Ponte Vecchio) (Stuart Summers)
- XEHPSDV and PVC do not use HuC (Daniele Ceraolo Spurio)
- Extract stepping information from PCI revid (Ponte Vecchio) (Matt Roper)
- Add initial PVC workarounds (Stuart Summers)
- SSEU handling driver refactor and Ponte Vecchio support (Matt Roper)
- GuC depriv applies to PVC (Matt Roper)
- Add register steering (Ponte Vecchio) (Matt Roper)
- Add recommended MMIO setting (Ponte Vecchio) (Matt Roper)
- Move multicast register handling to a dedicated file (Matt Roper)
- Cleanup interface for MCR operations (Matt Roper)
- Extend i915_vma_pin_iomap() (CQ Tang)
- Re-do the intel-gtt split (Lucas De Marchi)
- Correct duplicated/misplaced GT register definitions (Matt Roper)
- Prefer "XEHP_" prefix for registers (Matt Roper)
- Don't use DRM_DEBUG_WARN_ON for unexpected l3bank/mslice config (Tvrtko Ursulin)
- Don't use DRM_DEBUG_WARN_ON for ring unexpectedly not idle (Tvrtko Ursulin)
- Make drop_pages() return bool (Lucas De Marchi)
- Fix CFI violation with show_dynamic_id() (Nathan Chancellor)
- Use i915_probe_error instead of drm_error in GuC code (Vinay Belgaumkar)
- Fix use of static in macro mismatch (Andi Shyti)
- Update tiled blits selftest (Bommu Krishnaiah)
- Future-proof platform checks (Matt Roper)
- Only include what's needed (Jani Nikula)
- remove accidental static from a local variable (Jani Nikula)
- Add global forcewake request to drpc (Vinay Belgaumkar)
- Fix spelling typo in comment (pengfuyuan)
- Increase timeout for live_parallel_switch selftest (Akeem G Abodunrin)
- Use non-blocking H2G for waitboost (Vinay Belgaumkar)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YrwtLM081SQUG1Dc@tursulin-desk
Dave Airlie [Thu, 30 Jun 2022 23:52:36 +0000 (09:52 +1000)]
Merge tag 'drm-misc-next-2022-06-30' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.20:
UAPI Changes:
* fourcc: Update documentation
Cross-subsystem Changes:
* iosys-map: Rework iosys_map_{rd,wr} for improved performance
* vfio: Use aperture helpers
Core Changes:
* aperture: Export for use with other subsystems
* connector: Remove deprecated ida_simple_get()
* crtc: Add helper with general state checks, convert drivers
* format-helper: Add Kunit tests for RGB32 to RGB8
Driver Changes:
* ast: Fix black screen on resume
* bridge: tc358767: Simplify DSI lane handling
* mcde: Fix ref-count leak
* mxsfb/lcdif: Support i.MX8MP LCD controller
* stm/ltdc: Support dynamic Z order; Support mirroring; Fixes and cleanups
* vc4: Many small fixes throughout the driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmK9TnYACgkQaA3BHVML
# eiMJcgf+JsGWlFutkxlJCEUDKTXk6BYHQL4czyskDvpBoLrdU1tyrAfKKtqP5k+0
# SMvS6h1CFa/fSUCYpbdpJ6ER1fZ9r19WdgoPTBc4b97/uQTOJDzd5zuHDiJZquwC
# O6HD/rptUzPFe6HJuY2cYVtwMlWb2NhITMHfctgyeQJSMK8TwoU1bDVFftwxaWFt
# ISscTz0enn38sCjEarSpyKkBCinuaWDcpe5BI2Dp3imkDWR3ktzuh4B11QWS0DKs
# Q/FLGTEl1sDrV7r93WiA5BIAPVwNMm1Pl0syd1p42SNLNnv0gcap4GL6qni4h9Ev
# P/3fIInor/Sht8fyhlFsOUA8k2x7MA==
# =6NoJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Jun 2022 17:19:18 AEST
# gpg: using RSA key
7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Yr1On+eT1mCvIMzW@linux-uq9g
Lucas De Marchi [Tue, 28 Jun 2022 19:10:16 +0000 (12:10 -0700)]
iosys-map: Add per-word write
Like was done for read, provide the equivalent for write. Even if
current users are not in the hot path, this should future-proof it.
v2:
- Remove default from _Generic() - callers wanting to write more
than u64 should use iosys_map_memcpy_to()
- Add WRITE_ONCE() cases dereferencing the pointer when using system
memory
v3:
- Fix precedence issue when casting inside WRITE_ONCE(). By not using ()
around vaddr__ the offset was not part of the cast, but rather added
to it, producing a wrong address
- Remove compiletime_assert() as WRITE_ONCE() already contains it
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Reviewed-by: Christian König <christian.koenig@amd.com> # v1
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220628191016.3899428-2-lucas.demarchi@intel.com
Lucas De Marchi [Tue, 28 Jun 2022 19:10:15 +0000 (12:10 -0700)]
iosys-map: Add per-word read
Instead of always falling back to memcpy_fromio() for any size, prefer
using read{b,w,l}(). When reading struct members it's common to read
individual integer variables individually. Going through memcpy_fromio()
for each of them poses a high penalty.
Employ a similar trick as __seqprop() by using _Generic() to generate
only the specific call based on a type-compatible variable.
For a pariticular i915 workload producing GPU context switches,
__get_engine_usage_record() is particularly hot since the engine usage
is read from device local memory with dgfx, possibly multiple times
since it's racy. Test execution time for this test shows a ~12.5%
improvement with DG2:
Before:
nrepeats = 1000; min = 7.63243e+06; max = 1.01817e+07;
median = 9.52548e+06; var = 526149;
After:
nrepeats = 1000; min = 7.03402e+06; max = 8.8832e+06;
median = 8.33955e+06; var = 333113;
Other things attempted that didn't prove very useful:
1) Change the _Generic() on x86 to just dereference the memory address
2) Change __get_engine_usage_record() to do just 1 read per loop,
comparing with the previous value read
3) Change __get_engine_usage_record() to access the fields directly as it
was before the conversion to iosys-map
(3) did gave a small improvement (~3%), but doesn't seem to scale well
to other similar cases in the driver.
Additional test by Chris Wilson using gem_create from igt with some
changes to track object creation time. This happens to accidentally
stress this code path:
Pre iosys_map conversion of engine busyness:
lmem0: Creating 262144 4KiB objects took 59274.2ms
Unpatched:
lmem0: Creating 262144 4KiB objects took 108830.2ms
With readl (this patch):
lmem0: Creating 262144 4KiB objects took 61348.6ms
s/readl/READ_ONCE/
lmem0: Creating 262144 4KiB objects took 61333.2ms
So we do take a little bit more time than before the conversion, but
that is due to other factors: bringing the READ_ONCE back would be as
good as just doing this conversion.
v2:
- Remove default from _Generic() - callers wanting to read more
than u64 should use iosys_map_memcpy_from()
- Add READ_ONCE() cases dereferencing the pointer when using system
memory
v3:
- Fix precedence issue when casting inside READ_ONCE(). By not using ()
around vaddr__ the offset was not part of the cast, but rather added
to it, producing a wrong address
- Remove compiletime_assert() as READ_ONCE() already contains it
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> # v1
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220628191016.3899428-1-lucas.demarchi@intel.com
Nirmoy Das [Fri, 24 Jun 2022 11:08:21 +0000 (13:08 +0200)]
drm/i915: Fix a lockdep warning at error capture
For some platfroms we use stop_machine version of
gen8_ggtt_insert_page/gen8_ggtt_insert_entries to avoid a
concurrent GGTT access bug but this causes a circular locking
dependency warning:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ggtt->error_mutex);
lock(dma_fence_map);
lock(&ggtt->error_mutex);
lock(cpu_hotplug_lock);
Fix this by calling gen8_ggtt_insert_page/gen8_ggtt_insert_entries
directly at error capture which is concurrent GGTT access safe because
reset path make sure of that.
v2: Fix rebase conflict and added a comment.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5595
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624110821.29190-1-nirmoy.das@intel.com
Marek Vasut [Tue, 28 Jun 2022 17:41:52 +0000 (19:41 +0200)]
drm: lcdif: Add support for i.MX8MP LCDIF variant
Add support for i.MX8MP LCDIF variant. This is called LCDIFv3 and is
completely different from the LCDIFv3 found in i.MX23 in that it has
a completely scrambled register layout compared to all previous LCDIF
variants. The new LCDIFv3 also supports 36bit address space.
Add a separate driver which is really a fork of MXSFB driver with the
i.MX8MP LCDIF variant handling filled in.
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220628174152.167284-2-marex@denx.de
Marek Vasut [Tue, 28 Jun 2022 17:41:51 +0000 (19:41 +0200)]
dt-bindings: lcdif: Add compatible for i.MX8MP
Add compatible string for i.MX8MP LCDIF variant. This is called LCDIFv3
and is completely different from the LCDIFv3 found in i.MX23 in that it
has a completely scrambled register layout compared to all previous LCDIF
variants. The new LCDIFv3 also supports 36bit address space. However,
except for the complete bit reshuffling, this is still LCDIF and it still
works like one.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: devicetree@vger.kernel.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220628174152.167284-1-marex@denx.de
Marek Vasut [Fri, 24 Jun 2022 18:19:02 +0000 (20:19 +0200)]
drm/bridge: tc358767: Do not cache dsi_lanes twice
The DSI lane count can be accessed via the dsi device pointer,
make use of that. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624181902.151959-1-marex@denx.de
Jiang Jian [Thu, 23 Jun 2022 10:06:32 +0000 (18:06 +0800)]
drm/display/selftests: drop extra word 'for' in comments for MST selftests
there is an unexpected word 'for' in the comments that need to be dropped
file - ./drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
line - 3
* Test cases for for the DRM DP MST helpers
changed to:
* Test cases for the DRM DP MST helpers
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623100632.27056-1-jiangjian@cdjrlc.com
Dave Stevenson [Mon, 13 Jun 2022 14:48:00 +0000 (16:48 +0200)]
drm/vc4: hdmi: Move pixel doubling from Pixelvalve to HDMI block
With the change to 2 pixels/clock, the pixel doubling in the PV
results in doubling each pair of pixels, ie
ABABCDCD instead of
AABBCCDD.
Move the pixel doubling to the HDMI block, however this means
that DBLCLK modes now fall foul of requiring even values for
all the horizontal timing parameters.
As both 480i and 576i fail this, attempt to fix up DBLCLK modes
that have odd timings values.
Fixes:
8323989140f3 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-34-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:59 +0000 (16:47 +0200)]
drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes
For interlaced modes the timings were not being correctly
programmed into the HDMI block, so correct them.
Fixes:
8323989140f3 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-33-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dom Cobley [Mon, 13 Jun 2022 14:47:58 +0000 (16:47 +0200)]
drm/vc4: hdmi: Force modeset when bpc or format changes
Whenever the maximum BPC is changed, vc4_hdmi_encoder_compute_config()
might pick up a different BPC or format depending on the display
capabilities.
That change will have a number of side effects, including the clock
rates and whether the scrambling is enabled.
However, only drm_crtc_state.connectors_changed will be set to true,
since that properly only affects the connector.
This means that while drm_atomic_crtc_needs_modeset() will return true,
and thus drm_atomic_helper_commit_modeset_enables() will call our
encoder atomic_enable() hook, mode_changed will be false.
So crtc_set_mode() will not call our encoder .atomic_mode_set() hook. We
use this hook in vc4 to set the vc4_hdmi_connector_state.output_bpc (and
output_format), and will then reuse the value in .atomic_enable() to select
whether or not scrambling should be enabled.
However, since our clock rate is pre-computed during .atomic_check(), we
end up with the clocks properly configured, but the scrambling disabled,
leading to a blank screen.
Let's set mode_changed to true in our HDMI driver to force the update of
output_bpc, and thus prevent the issue entirely.
Fixes:
ba8c0faebbb0 ("drm/vc4: hdmi: Enable 10/12 bpc output")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-32-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Mateusz Kwiatkowski [Mon, 13 Jun 2022 14:47:57 +0000 (16:47 +0200)]
drm/vc4: hdmi: Fix timings for interlaced modes
Increase the number of post-sync blanking lines on odd fields instead of
decreasing it on even fields. This makes the total number of lines
properly match the modelines.
Additionally fix the value of PV_VCONTROL_ODD_DELAY, which did not take
pixels_per_clock into account, causing some displays to invert the
fields when driven by bcm2711.
Fixes:
682e62c45406 ("drm/vc4: Fix support for interlaced modes on HDMI.")
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-31-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dom Cobley [Mon, 13 Jun 2022 14:47:56 +0000 (16:47 +0200)]
drm/vc4: hdmi: Report that 3d/stereo is allowed
Our HDMI controllers supports Stereo output so let's enable it.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-30-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:55 +0000 (16:47 +0200)]
drm/vc4: hdmi: Add MISC_CONTROL register for vc4
The MISC_CONTROL register allows configuration of pixel repetition
for pixel doubling in the HDMI block instead of PixelValve.
It was already defined for vc5, so add it for vc4.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-29-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:54 +0000 (16:47 +0200)]
drm/vc4: hdmi: Add HDMI format detection registers to register list
The block can detect what the incoming image timings are for
debug purposes. Add them to the list of registers understood
by the driver to allow easy dumping of the values.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-28-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dom Cobley [Mon, 13 Jun 2022 14:47:53 +0000 (16:47 +0200)]
drm/vc4: hdmi: Remove VC4_HDMI_SCHEDULER_CONTROL_VERT_ALWAYS_KEEPOUT
This bit ensures data island packets are never generated when disallowed
by HDCP. As no Pi boards support HDCP this is providing an unnecessary
restriction
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-27-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dom Cobley [Mon, 13 Jun 2022 14:47:52 +0000 (16:47 +0200)]
drm/vc4: hdmi: Skip writes to disabled packet RAM
This path actually occurs when audio is started during a hdmi mode set.
As the data will be written by vc4_hdmi_set_infoframes when packet RAM
is enabled again, don't treat as an error
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-26-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dom Cobley [Mon, 13 Jun 2022 14:47:51 +0000 (16:47 +0200)]
drm/vc4: hdmi: Stop checking for enabled output in audio
The current HDMI driver, in vc4_hdmi_audio_can_stream() checks whether
the display output is enabled.
This has been there in one form or the other since the introduction of
the audio support in the VC4 HDMI driver in commit
bb7d78568814
("drm/vc4: Add HDMI audio support"), but no justification for this check
is in the commit message, or in the discussions around the patches.
One can only assume this was done to prevent a user from playing audio
on the ALSA soundcard when the monitor doesn't support it.
However, this is causing some issues. Indeed, Kodi, for example, was
hitting some errors if it was streaming audio during a modeset. With the
theory above, it does make sense, but the display and audio threads are
typically completely different processes with no opportunity to
synchronise which makes it hard to workaround.
Removing that check also doesn't seem to cause any trouble, so let's
just remove it.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-25-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:50 +0000 (16:47 +0200)]
drm/vc4: hdmi: Move HDMI reset to pm_resume
The BCM2835-37 found in the RaspberryPi 0 to 3 have a power domain
attached to the HDMI block, handled in Linux through runtime_pm.
That power domain is shared with the VEC block, so even if we put our
runtime_pm reference in the HDMI driver it would keep being on. If the
VEC is disabled though, the power domain would be disabled and we would
lose any initialization done in our bind implementation.
That initialization involves calling the reset function and initializing
the CEC registers.
Let's move the initialization to our runtime_resume implementation so
that we initialize everything properly if we ever need to.
Fixes:
c86b41214362 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-24-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:49 +0000 (16:47 +0200)]
drm/vc4: hdmi: Switch to pm_runtime_status_suspended
If the controller isn't clocked or its domain powered up, the register
accesses will either stall the CPU or return garbage, respectively.
Thus, we had a warning in our register access function to complain when
that kind of risky accesses were performed.
In order to check the runtime_pm power state, we were using
pm_runtime_active(), but it turns out that it will become active only
once the runtime_resume hook has been executed.
This prevents us from doing any WARN-free register access in our
runtime_resume() implementation, while this is valid.
Let's switch to pm_runtime_status_suspended() instead.
Fixes:
14e193b95604 ("drm/vc4: hdmi: Warn if we access the controller while disabled")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-23-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:48 +0000 (16:47 +0200)]
drm/vc4: hdmi: Reset HDMI MISC_CONTROL register
The HDMI block can repeat pixels for double clocked modes,
and the firmware is now configuring the block to do this as
the PV is doing it incorrectly when at 2pixels/clock.
If the kernel doesn't reset it then we end up with strange
modes.
Reset MISC_CONTROL.
Fixes:
8323989140f3 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-22-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dom Cobley [Mon, 13 Jun 2022 14:47:47 +0000 (16:47 +0200)]
drm/vc4: hdmi: Avoid full hdmi audio fifo writes
We are getting occasional VC4_HD_MAI_CTL_ERRORF in
HDMI_MAI_CTL which seem to correspond with audio dropouts.
Reduce the threshold where we deassert DREQ to avoid the fifo
overfilling
Fixes:
bb7d78568814 ("drm/vc4: Add HDMI audio support")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-21-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dom Cobley [Mon, 13 Jun 2022 14:47:46 +0000 (16:47 +0200)]
drm/vc4: hdmi: Clear unused infoframe packet RAM registers
Using a hdmi analyser the bytes in packet ram
registers beyond the length were visible in the
infoframes and it flagged the checksum as invalid.
Zeroing unused words of packet RAM avoids this
Fixes:
21317b3fba54 ("drm/vc4: Set up the AVI and SPD infoframes.")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-20-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:45 +0000 (16:47 +0200)]
drm/vc4: hdmi: Add all the vc5 HDMI registers into the debugfs dumps
The vc5 HDMI registers hadn't been added into the debugfs
register sets, therefore weren't dumped on request.
Add them in.
Fixes:
8323989140f3 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-19-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Phil Elwell [Mon, 13 Jun 2022 14:47:44 +0000 (16:47 +0200)]
drm/vc4: hdmi: Disable audio if dmas property is present but empty
The dmas property is used to hold the dmaengine channel used for audio
output.
Older device trees were missing that property, so if it's not there we
disable the audio output entirely.
However, some overlays have set an empty value to that property, mostly
to workaround the fact that overlays cannot remove a property. Let's add
a test for that case and if it's empty, let's disable it as well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Link: https://lore.kernel.org/r/20220613144800.326124-18-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:43 +0000 (16:47 +0200)]
drm/vc4: dsi: Add correct stop condition to vc4_dsi_encoder_disable iteration
vc4_dsi_encoder_disable is partially an open coded version of
drm_bridge_chain_disable, but it missed a termination condition
in the loop for ->disable which meant that no post_disable
calls were made.
Add in the termination clause.
Fixes:
033bfe7538a1 ("drm/vc4: dsi: Fix bridge chain handling")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-17-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:42 +0000 (16:47 +0200)]
drm/vc4: dsi: Fix dsi0 interrupt support
DSI0 seemingly had very little or no testing as a load of
the register mappings were incorrect/missing, so host
transfers always timed out due to enabling/checking incorrect
bits in the interrupt enable and status registers.
Fixes:
4078f5757144 ("drm/vc4: Add DSI driver")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-16-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:41 +0000 (16:47 +0200)]
drm/vc4: dsi: Register dsi0 as the correct vc4 encoder type
vc4_dsi was registering both dsi0 and dsi1 as VC4_ENCODER_TYPE_DSI1
which seemed to work OK for a single DSI display, but fails
if there are two DSI displays connected.
Update to register the correct type.
Fixes:
4078f5757144 ("drm/vc4: Add DSI driver")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-15-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:40 +0000 (16:47 +0200)]
drm/vc4: dsi: Correct pixel order for DSI0
For slightly unknown reasons, dsi0 takes a different pixel format
to dsi1, and that has to be set in the pixel valve.
Amend the setup accordingly.
Fixes:
a86773d120d7 ("drm/vc4: Add support for feeding DSI encoders from the pixel valve.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-14-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:39 +0000 (16:47 +0200)]
drm/vc4: dsi: Correct DSI divider calculations
The divider calculations tried to find the divider just faster than the
clock requested. However if it required a divider of 7 then the for loop
aborted without handling the "error" case, and could end up with a clock
lower than requested.
The integer divider from parent PLL to DSI clock is also capable of
going up to /255, not just /7 that the driver was trying. This allows
for slower link frequencies on the DSI bus where the resolution permits.
Correct the loop so that we always have a clock greater than requested,
and covering the whole range of dividers.
Fixes:
86c1b9eff3f2 ("drm/vc4: Adjust modes in DSI to work around the integer PLL divider.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-13-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:38 +0000 (16:47 +0200)]
drm/vc4: dsi: Release workaround buffer and DMA
On Pi0-3 the driver allocates a buffer and requests a DMA channel
because the ARM can't write to DSI1's registers directly.
However, we never release that buffer or channel. Let's add a
device-managed action to release each.
Fixes:
4078f5757144 ("drm/vc4: Add DSI driver")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-12-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:37 +0000 (16:47 +0200)]
drm/vc4: dpi: Ensure a default format is selected
In a couple of error/incomplete configuration cases, the
DPI_FORMAT bits wouldn't get set.
Enforce our RGB888 default in all these cases.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-11-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:36 +0000 (16:47 +0200)]
drm/vc4: dpi: Add option for inverting pixel clock and output enable
DRM provides flags for inverting pixel clock and output enable
signals, but these were not mapped to the relevant registers.
Add those mappings.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-10-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:35 +0000 (16:47 +0200)]
drm/vc4: dpi: Add support for composite syncs to vc4_dpi
The hardware can combine H&V syncs onto the output enable line
as composite syncs, so add the relevant configuration to do that.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-9-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:34 +0000 (16:47 +0200)]
drm/vc4: hvs: Add debugfs node that dumps the current display lists
This allows easy analysis of display lists when debugging.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-8-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:33 +0000 (16:47 +0200)]
drm/vc4: plane: Add alpha_blend_mode property to each plane.
Move from only supporting the default of pre-multiplied
alpha to supporting user specified blend mode using the
standardised property.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-7-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dave Stevenson [Mon, 13 Jun 2022 14:47:32 +0000 (16:47 +0200)]
drm/vc4: plane: Fix margin calculations for the right/bottom edges
The current plane margin calculation code clips the right and bottom
edges of the range based using the left and top margins.
This is obviously wrong, so let's fix it.
Fixes:
666e73587f90 ("drm/vc4: Take margin setup into account when updating planes")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-6-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Dom Cobley [Mon, 13 Jun 2022 14:47:31 +0000 (16:47 +0200)]
drm/vc4: plane: Remove subpixel positioning check
There is little harm in ignoring fractional coordinates
(they just get truncated).
Without this:
modetest -M vc4 -F tiles,gradient -s 32:1920x1080-60 -P89@74:1920x1080*.1.1@XR24
is rejected. We have the same issue in Kodi when trying to
use zoom options on video.
Note: even if all coordinates are fully integer. e.g.
src:[0,0,1920,1080] dest:[-10,-10,1940,1100]
it will still get rejected as drm_atomic_helper_check_plane_state
uses drm_rect_clip_scaled which transforms this to fractional src coords
Fixes:
21af94cf1a4c ("drm/vc4: Add support for scaling of display planes.")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-5-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 13 Jun 2022 14:47:30 +0000 (16:47 +0200)]
drm/vc4: kms: Use maximum FIFO load for the HVS clock rate
The core clock computation takes into account both the load due to the
input (ie, planes) and its output (ie, encoders).
However, while the input load needs to consider all the planes, and thus
sum all of their associated loads, the output happens mostly in
parallel.
Therefore, we need to consider only the maximum of all the output loads,
and not the sum like we were doing. This resulted in a clock rate way
too high which could be discarded for being too high by the clock
framework.
Since recent changes, the clock framework will even downright reject it,
leading to a core clock being too low for its current needs.
Fixes:
16e101051f32 ("drm/vc4: Increase the core clock based on HVS load")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-4-maxime@cerno.tech
Maxime Ripard [Mon, 13 Jun 2022 14:47:29 +0000 (16:47 +0200)]
drm/vc4: kms: Warn if clk_set_min_rate fails
We currently ignore the clk_set_min_rate return code assuming it would
succeed. However, it can fail if we ask for a rate higher than the
current maximum for example.
Since we can't fail in atomic_commit, at least warn on failure.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-3-maxime@cerno.tech
Dave Stevenson [Mon, 13 Jun 2022 14:47:28 +0000 (16:47 +0200)]
drm/vc4: drv: Adopt the dma configuration from the HVS or V3D component
vc4_drv isn't necessarily under the /soc node in DT as it is a
virtual device, but it is the one that does the allocations.
The DMA addresses are consumed by primarily the HVS or V3D, and
those require VideoCore cache alias address mapping, and so will be
under /soc.
During probe find the a suitable device node for HVS or V3D,
and adopt the DMA configuration of that node.
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-2-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Imre Deak [Thu, 23 Jun 2022 14:49:55 +0000 (17:49 +0300)]
drm/fourcc: Document the Intel CCS modifiers' CC plane expected pitch
The driver expects the pitch of the Intel CCS CC color planes to be
64 bytes aligned, adjust the modifier descriptions accordingly.
Cc: Nanley Chery <nanley.g.chery@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623144955.2486736-1-imre.deak@intel.com
Marek Vasut [Tue, 28 Jun 2022 00:34:07 +0000 (02:34 +0200)]
drm/doc: Fix comment typo
Replace apprpriately with appropriately.
Fixes:
1e4d84c6589e9 ("drm/doc: Polish plane composition property docs")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20220628003407.77765-1-marex@denx.de
Vinay Belgaumkar [Thu, 23 Jun 2022 00:32:25 +0000 (17:32 -0700)]
drm/i915/guc/slpc: Use non-blocking H2G for waitboost
SLPC min/max frequency updates require H2G calls. We are seeing
timeouts when GuC channel is backed up and it is unable to respond
in a timely fashion causing warnings and affecting CI.
This is seen when waitboosting happens during a stress test.
this patch updates the waitboost path to use a non-blocking
H2G call instead, which returns as soon as the message is
successfully transmitted.
v2: Use drm_notice to report any errors that might occur while
sending the waitboost H2G request (Tvrtko)
v3: Add drm_notice inside force_min_freq (Ashutosh)
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623003225.23301-1-vinay.belgaumkar@intel.com
Umesh Nerlige Ramappa [Tue, 21 Jun 2022 19:21:05 +0000 (12:21 -0700)]
drm/i915/reset: Add additional steps for Wa_22011802037 for execlist backend
For execlists backend, current implementation of Wa_22011802037 is to
stop the CS before doing a reset of the engine. This WA was further
extended to wait for any pending MI FORCE WAKEUPs before issuing a
reset. Add the extended steps in the execlist path of reset.
In addition, extend the WA to gen11.
v2: (Tvrtko)
- Clarify comments, commit message, fix typos
- Use IS_GRAPHICS_VER for gen 11/12 checks
v3: (Daneile)
- Drop changes to intel_ring_submission since WA does not apply to it
- Log an error if MSG IDLE is not defined for an engine
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes:
f6aa0d713c88 ("drm/i915: Add Wa_22011802037 force cs halt")
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621192105.2100585-1-umesh.nerlige.ramappa@intel.com
Alan Previn [Thu, 23 Jun 2022 02:31:57 +0000 (19:31 -0700)]
drm/i915/guc: Don't update engine busyness stats too frequently
Using two different types of workoads, it was observed that
guc_update_engine_gt_clks was being called too frequently and/or
causing a CPU-to-lmem bandwidth hit over PCIE. Details on
the workloads and numbers are in the notes below.
Background: At the moment, guc_update_engine_gt_clks can be invoked
via one of 3 ways. #1 and #2 are infrequent under normal operating
conditions:
1.When a predefined "ping_delay" timer expires so that GuC-
busyness can sample the GTPM clock counter to ensure it
doesn't miss a wrap-around of the 32-bits of the HW counter.
(The ping_delay is calculated based on 1/8th the time taken
for the counter go from 0x0 to 0xffffffff based on the
GT frequency. This comes to about once every 28 seconds at a
GT frequency of 19.2Mhz).
2.In preparation for a gt reset.
3.In response to __gt_park events (as the gt power management
puts the gt into a lower power state when there is no work
being done).
Root-cause: For both the workloads described farther below, it was
observed that when user space calls IOCTLs that unparks the
gt momentarily and repeats such calls many times in quick succession,
it triggers calling guc_update_engine_gt_clks as many times. However,
the primary purpose of guc_update_engine_gt_clks is to ensure we don't
miss the wraparound while the counter is ticking. Thus, the solution
is to ensure we skip that check if gt_park is calling this function
earlier than necessary.
Solution: Snapshot jiffies when we do actually update the busyness
stats. Then get the new jiffies every time intel_guc_busyness_park
is called and bail if we are being called too soon. Use half of the
ping_delay as a safe threshold.
NOTE1: Workload1: IGTs' gem_create was modified to create a file handle,
allocate memory with sizes that range from a min of 4K to the max supported
(in power of two step-sizes). Its maps, modifies and reads back the
memory. Allocations and modification is repeated until total memory
allocation reaches the max. Then the file handle is closed. With this
workload, guc_update_engine_gt_clks was called over 188 thousand times
in the span of 15 seconds while this test ran three times. With this patch,
the number of calls reduced to 14.
NOTE2: Workload2: 30 transcode sessions are created in quick succession.
While these sessions are created, pcm-iio tool was used to measure I/O
read operation bandwidth consumption sampled at 100 milisecond intervals
over the course of 20 seconds. The total bandwidth consumed over 20 seconds
without this patch was measured at average at 311KBps per sample. With this
patch, the number went down to about 175Kbps which is about a 43% savings.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623023157.211650-2-alan.previn.teres.alexis@intel.com
Niranjana Vishwanathapura [Tue, 14 Jun 2022 18:43:47 +0000 (00:13 +0530)]
Revert "drm/i915: Hold reference to intel_context over life of i915_request"
This reverts commit
1e98d8c52ed5dfbaf273c4423c636525c2ce59e7.
The problem with this patch is that it makes i915_request to hold a
reference to intel_context, which in turn holds a reference on the VM.
This strong back referencing can lead to reference loops which leads
to resource leak.
An example is the upcoming VM_BIND work which requires VM to hold
a reference to some shared VM specific BO. But this BO's dma-resv
fences holds reference to the i915_request thus leading to reference
loop.
v2:
Do not use reserved requests for virtual engines
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Mathew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614184348.23746-3-ramalingam.c@intel.com
Niranjana Vishwanathapura [Tue, 14 Jun 2022 18:43:46 +0000 (00:13 +0530)]
drm/i915: Do not access rq->engine without a reference
In i915_fence_get_driver_name(), user may not hold a
reference to rq->engine. Hence do not access it. Instead,
store required device private pointer in 'rq->i915' and use it.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614184348.23746-2-ramalingam.c@intel.com
Matt Roper [Fri, 24 Jun 2022 21:03:28 +0000 (14:03 -0700)]
drm/i915: Prefer "XEHP_" prefix for registers
We've been introducing new registers with a mix of "XEHP_"
(architecture) and "XEHPSDV_" (platform) prefixes. For consistency,
let's settle on "XEHP_" as the preferred form.
XEHPSDV_RP_STATE_CAP stays with its current name since that's truly a
platform-specific register and not something that applies to the Xe_HP
architecture as a whole.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz@caztech.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624210328.308630-2-matthew.d.roper@intel.com
Matt Roper [Fri, 24 Jun 2022 21:03:27 +0000 (14:03 -0700)]
drm/i915: Correct duplicated/misplaced GT register definitions
XEHPSDV_FLAT_CCS_BASE_ADDR, GEN8_L3_LRA_1_GPGPU, and MMCD_MISC_CTRL were
duplicated between i915_reg.h and intel_gt_regs.h. These are all GT
registers, so we should drop the copy from i915_reg.h.
XEHPSDV_TILE0_ADDR_RANGE was defined in i915_reg.h, but really belongs
in intel_gt_regs.h. Move it.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624210328.308630-1-matthew.d.roper@intel.com
Yannick Fertre [Fri, 3 Jun 2022 13:46:54 +0000 (15:46 +0200)]
drm/stm: ltdc: update hardware error management
The latest hardware version (0x40100) supports a hardware threshold
register (aka FUTR) to trigger a fifo underrun interrupt.
A software threshold has been implemented for other hardware versions.
The threshold is set to 128 by default.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134654.594373-1-yannick.fertre@foss.st.com
Yannick Fertre [Fri, 3 Jun 2022 13:45:47 +0000 (15:45 +0200)]
drm/stm: ltdc: add support of horizontal & vertical mirroring
Support of vertical & horizontal mirroring features thanks to
the plane rotation property.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134547.593790-1-yannick.fertre@foss.st.com
Yannick Fertre [Fri, 3 Jun 2022 13:44:59 +0000 (15:44 +0200)]
drm/stm: ltdc: add support of the dynamic z-order
Zpos property is immutable for all hardware versions except the last
version (0x40100) which support the blending order feature
(dynamic z-order).
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134459.593379-1-yannick.fertre@foss.st.com
Yannick Fertre [Fri, 3 Jun 2022 13:43:34 +0000 (15:43 +0200)]
drm/stm: ltdc: fix various coding-style warnings
Fix issues reported by checkpatch.pl:
- Braces {} should be used on all arms
- Blank lines
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134334.592805-1-yannick.fertre@foss.st.com
Yannick Fertre [Fri, 3 Jun 2022 13:42:50 +0000 (15:42 +0200)]
drm/stm: ltdc: remove error message about scaling
Remove error message about scaling & replace it by a debug
message to avoid too much error.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134250.592408-1-yannick.fertre@foss.st.com
Yannick Fertre [Fri, 3 Jun 2022 13:41:51 +0000 (15:41 +0200)]
drm/stm: ltdc: disable all layers before crtc shutdown
All plans must be disabled before the CRTC shutdown helping
the crtc to restart from a clean situation (without unwanted
planes already enable).
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220603134151.591997-1-yannick.fertre@foss.st.com
Matthew Auld [Wed, 22 Jun 2022 15:59:19 +0000 (16:59 +0100)]
drm/i915: tweak the ordering in cpu_write_needs_clflush
For imported dma-buf objects we leave the object as cache_coherent = 0
across all platforms, which is reasonable given that have no clue what
the memory underneath is, and its not like the driver can ever manually
clflush the pages anyway (like with i915_gem_clflush_object) for such
objects. However on discrete we choose to treat cache_dirty = true as a
programmer error, leading to a warning. The simplest fix looks to be to
just change the ordering in cpu_write_needs_clflush to prevent ever
setting cache_dirty for dma-buf objects on discrete.
Fixes:
d028a7690d87 ("drm/i915/dmabuf: Fix prime_mmap to work when using LMEM")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5266
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622155919.355081-1-matthew.auld@intel.com
José Expósito [Mon, 20 Jun 2022 16:06:40 +0000 (18:06 +0200)]
drm/doc: Add KUnit documentation
Explain how to run the KUnit tests present in the DRM subsystem and
clarify why the UML-only options were not added to the configuration
file present in drivers/gpu/drm/.kunitconfig [1] [2].
[1] https://lore.kernel.org/dri-devel/CABVgOSn8i=LO5p7830h2XU1Jgg0KrN0qTnxkOMhf1oTgxjaKKw@mail.gmail.com/
[2] https://lore.kernel.org/dri-devel/CAGS_qxqpiCim_sy1LDK7PLwVgWf-LKW+uNFTGM=T7ydk-dYcEw@mail.gmail.com/
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620160640.3790-4-jose.exposito89@gmail.com
José Expósito [Mon, 20 Jun 2022 16:06:39 +0000 (18:06 +0200)]
drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_rgb332()
Test the conversion from XRGB8888 to RGB332.
What is tested?
- Different values for the X in XRGB8888 to make sure it is ignored
- Different clip values: Single pixel and full and partial buffer
- Well known colors: White, black, red, green, blue, magenta, yellow
and cyan
- Other colors: Randomly picked
- Destination pitch
How to run the tests?
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/gpu/drm/tests \
--kconfig_add CONFIG_VIRTIO_UML=y \
--kconfig_add CONFIG_UML_PCI_OVER_VIRTIO=y
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620160640.3790-3-jose.exposito89@gmail.com
José Expósito [Mon, 20 Jun 2022 16:06:38 +0000 (18:06 +0200)]
drm/rect: Add DRM_RECT_INIT() macro
Add a helper macro to initialize a rectangle from x, y, width and
height information.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620160640.3790-2-jose.exposito89@gmail.com
Thomas Zimmermann [Fri, 17 Jun 2022 10:32:26 +0000 (12:32 +0200)]
drm/ast: Enable primary plane with CRTC
As the CRTC requires a primary plane for display, ensure that the
primary plane is enabled with the CRTC.
Use drm_atomic_helper_check_crtc_state(). Add all affected planes
to the atomic state so that their state will be checked as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617103226.25617-4-tzimmermann@suse.de
Thomas Zimmermann [Fri, 17 Jun 2022 10:32:25 +0000 (12:32 +0200)]
drm/simple-kms: Use drm_atomic_helper_check_crtc_state()
Simple-KMS helpers guarantee that the CRTC and plane enable
flags are synchronized. Implement this with atomic helpers
drm_atomic_helper_check_crtc_state() on the CRTC side, and
drm_atomic_helper_check_plane_state() on the plane side.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617103226.25617-3-tzimmermann@suse.de
Thomas Zimmermann [Fri, 17 Jun 2022 10:32:24 +0000 (12:32 +0200)]
drm/atomic-helper: Add helper drm_atomic_helper_check_crtc_state()
Add drm_atomic_helper_check_crtc_state(), which contains tests common
to many CRTCs. The first added test verifies that an enabled CRTC has
at least one enabled primary plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617103226.25617-2-tzimmermann@suse.de
Thomas Zimmermann [Tue, 21 Jun 2022 10:46:17 +0000 (12:46 +0200)]
drm/fb-helper: Fix out-of-bounds access
Clip memory range to screen-buffer size to avoid out-of-bounds access
in fbdev deferred I/O's damage handling.
Fbdev's deferred I/O can only track pages. From the range of pages, the
damage handler computes the clipping rectangle for the display update.
If the fbdev screen buffer ends near the beginning of a page, that page
could contain more scanlines. The damage handler would then track these
non-existing scanlines as dirty and provoke an out-of-bounds access
during the screen update. Hence, clip the maximum memory range to the
size of the screen buffer.
While at it, rename the variables min/max to min_off/max_off in
drm_fb_helper_deferred_io(). This avoids confusion with the macros of
the same name.
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Nuno Gonçalves <nunojpg@gmail.com>
Fixes:
67b723f5b742 ("drm/fb-helper: Calculate damaged area in separate helper")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: <stable@vger.kernel.org> # v5.18+
Link: https://patchwork.freedesktop.org/patch/msgid/20220621104617.8817-1-tzimmermann@suse.de
Alex Williamson [Wed, 22 Jun 2022 14:01:34 +0000 (16:01 +0200)]
vfio/pci: Remove console drivers
Console drivers can create conflicts with PCI resources resulting in
userspace getting mmap failures to memory BARs. This is especially
evident when trying to re-use the system primary console for userspace
drivers. Use the aperture helpers to remove these conflicts.
v3:
* call aperture_remove_conflicting_pci_devices()
Reported-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-4-tzimmermann@suse.de
Thomas Zimmermann [Wed, 22 Jun 2022 14:01:33 +0000 (16:01 +0200)]
drm: Implement DRM aperture helpers under video/
Implement DRM's aperture helpers under video/ for sharing with other
sub-systems. Remove DRM-isms from the interface. The helpers track
the ownership of framebuffer apertures and provide hand-over from
firmware, such as EFI and VESA, to native graphics drivers.
Other subsystems, such as fbdev and vfio, also have to maintain ownership
of framebuffer apertures. Moving DRM's aperture helpers to a more public
location allows all subsystems to interact with each other and share a
common implementation.
The aperture helpers are selected by the various firmware drivers within
DRM and fbdev, and the VGA text-console driver.
The original DRM interface is kept in place for use by DRM drivers.
v3:
* prefix all interfaces with aperture_ (Javier)
* rework and simplify documentation (Javier)
* rename struct dev_aperture to struct aperture_range
* rebase onto latest DRM
* update MAINTAINERS entry
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-3-tzimmermann@suse.de
Thomas Zimmermann [Wed, 22 Jun 2022 14:01:32 +0000 (16:01 +0200)]
MAINTAINERS: Broaden scope of simpledrm entry
There will be more DRM drivers for firmware-provided framebuffers. Use
the existing entry for simpledrm instead of adding a new one for each
driver. Also add DRM's aperture helpers, which are part of the driver's
infrastructure.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-2-tzimmermann@suse.de
Jocelyn Falempe [Wed, 22 Jun 2022 12:48:15 +0000 (14:48 +0200)]
drm/ast: Fix black screen when getting out of suspend
With an AST2600, the screen is garbage when going out of suspend.
This is because color settings are lost, and not restored on resume.
Force the color settings on DPMS_ON, to make sure the settings are correct.
I didn't write this code, it comes from the out-of-tree aspeed driver v1.13
https://www.aspeedtech.com/support_driver/
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622124815.356035-1-jfalempe@redhat.com
Miaoqian Lin [Wed, 25 May 2022 11:54:11 +0000 (15:54 +0400)]
drm/mcde: Fix refcount leak in mcde_dsi_bind
Every iteration of for_each_available_child_of_node() decrements
the reference counter of the previous node. There is no decrement
when break out from the loop and results in refcount leak.
Add missing of_node_put() to fix this.
Fixes:
5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220525115411.65455-1-linmq006@gmail.com
Bo Liu [Fri, 17 Jun 2022 08:23:19 +0000 (04:23 -0400)]
drm/connector: Remove usage of the deprecated ida_simple_xxx API
Use ida_alloc_xxx()/ida_free() instead of
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617082319.7599-1-liubo03@inspur.com
Link: https://patchwork.freedesktop.org/patch/msgid/20220621190055.8323-1-jiangjian@cdjrlc.com
Joel Selvaraj [Wed, 1 Jun 2022 08:24:10 +0000 (13:54 +0530)]
drm/panel: introduce ebbg,ft8719 panel
Add DRM panel driver for EBBG FT8719 6.18" 2246x1080 DSI video mode
panel, which can be found on some Xiaomi Poco F1 phones. The panel's
backlight is managed through QCOM WLED driver.
Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/BY5PR02MB7009B6FA7F17A3DA36DDA44CD9DF9@BY5PR02MB7009.namprd02.prod.outlook.com
Joel Selvaraj [Wed, 1 Jun 2022 08:24:09 +0000 (13:54 +0530)]
drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro
A helper macro that can be used to simplify sending DCS commands.
It is useful in scenarios like panel initialization which can sometimes
involve sending lot of DCS commands.
Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/BY5PR02MB700952493EEB6F0E77DC8416D9DF9@BY5PR02MB7009.namprd02.prod.outlook.com
Joel Selvaraj [Wed, 1 Jun 2022 08:24:08 +0000 (13:54 +0530)]
dt-bindings: display: Add bindings for EBBG FT8719
Add bindings for the EBBG FT8719 6.18" 2246x1080 DSI video mode panel,
which can be found on some Xiaomi Poco F1 phones. The backlight is
managed through the QCOM WLED driver.
Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/BY5PR02MB7009E821B0D4AC20E11F8F13D9DF9@BY5PR02MB7009.namprd02.prod.outlook.com
Joel Selvaraj [Wed, 1 Jun 2022 08:24:07 +0000 (13:54 +0530)]
dt-bindings: vendor-prefixes: Add prefix for EBBG
Add a prefix for EBBG. They manufacture displays which are used in some
Xiaomi phones, but I could not find much details about the company.
Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/BY5PR02MB7009387E1E6C060864C03F87D9DF9@BY5PR02MB7009.namprd02.prod.outlook.com
Jiasheng Jiang [Thu, 2 Jun 2022 10:34:01 +0000 (18:34 +0800)]
drm: bridge: adv7511: Add check for mipi_dsi_driver_register
As mipi_dsi_driver_register could return error if fails,
it should be better to check the return value and return error
if fails.
Moreover, if i2c_add_driver fails, mipi_dsi_driver_register
should be reverted.
Fixes:
1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220602103401.2980938-1-jiasheng@iscas.ac.cn
Stephen Kitt [Tue, 7 Jun 2022 18:10:22 +0000 (20:10 +0200)]
drm/bridge: parade-ps8622: Use backlight helper
backlight_properties.fb_blank is deprecated. The states it represents
are handled by other properties; but instead of accessing those
properties directly, drivers should use the helpers provided by
backlight.h.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607181022.1119546-1-steve@sk2.org
Bjorn Andersson [Wed, 8 Jun 2022 02:06:14 +0000 (19:06 -0700)]
drm/panel-edp: Add LQ140M1JW48 edp panel entry
Add panel identification entry for the Sharp LQ140M1JW48 eDP panel.
Due to lacking documentation, a delay similar to those for the
LQ140M1JW46 numbers are picked for now.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608020614.4098292-1-bjorn.andersson@linaro.org
Bastian Krause [Fri, 10 Jun 2022 11:15:11 +0000 (13:15 +0200)]
drm/panel: simple: add AM-800600P5TMQW-TB8H
Add support for the Ampire AM-800600P5TMQW-TB8H 800x600 panel. Data
sheet is currently not publicly available, unfortunately.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610111511.1421067-2-bst@pengutronix.de
Bastian Krause [Fri, 10 Jun 2022 11:15:10 +0000 (13:15 +0200)]
dt-bindings: display: simple: add Ampire AM-800600P5TMQW-TB8H panel
Add Ampire AM-800600P5TMQW-TB8H 8" TFT LCD panel compatible string.
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610111511.1421067-1-bst@pengutronix.de
Stephen Kitt [Thu, 16 Jun 2022 17:08:21 +0000 (19:08 +0200)]
drm: shmobile: Use backlight helper
This started with work on the removal of backlight_properties'
deprecated fb_blank field, much of which can be taken care of by using
helper functions provided by backlight.h instead of directly accessing
fields in backlight_properties. This patch series doesn't involve
fb_blank, but it still seems useful to use helper functions where
appropriate.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616170821.1348169-1-steve@sk2.org
Stephen Kitt [Thu, 16 Jun 2022 17:23:13 +0000 (19:23 +0200)]
drm/panel: panel-asus-z00t-tm5p5-n35596: Use backlight helper
backlight_properties.fb_blank is deprecated. The states it represents
are handled by other properties; but instead of accessing those
properties directly, drivers should use the helpers provided by
backlight.h.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616172316.1355133-2-steve@sk2.org
Stephen Kitt [Thu, 16 Jun 2022 17:23:14 +0000 (19:23 +0200)]
drm/panel: panel-dsi-cm: Use backlight helpers
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Instead of setting the power state by manually updating fields in
struct backlight_properties, use backlight_enable() and
backlight_disable(). These also call backlight_update_status() so the
separate call is no longer needed.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616172316.1355133-3-steve@sk2.org
Stephen Kitt [Thu, 16 Jun 2022 17:23:15 +0000 (19:23 +0200)]
drm/panel: sony-acx565akm: Use backlight helpers
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Instead of manually checking the power state in struct
backlight_properties, use backlight_is_blank().
While we're at it, drop .fb_blank from the initialisation function; it
is deprecated, and this helps make progress towards enabling its
removal. This change makes no functional difference since
FB_BLANK_UNBLANK is the default value.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616172316.1355133-4-steve@sk2.org
Alexander Stein [Tue, 21 Jun 2022 07:21:18 +0000 (09:21 +0200)]
drm/panel: panel-simple: Add dev_err_probe if backlight could not be found
If the backlight node is not enabled, this (silently) returns with
-EPROBE_DEFER. /sys/kernel/debug/devices_deferred also shows nothing
helpful:
$ cat /sys/kernel/debug/devices_deferred
display
With this patch, there is a helpful hint:
$ cat /sys/kernel/debug/devices_deferred
display panel-simple: Could not find backlight
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621072118.513346-1-alexander.stein@ew.tq-group.com
Jiang Jian [Tue, 21 Jun 2022 13:31:07 +0000 (21:31 +0800)]
drm/pl111: drop unexpected word "the" in the comments
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/pl111/pl111_display.c
line: 251
* Note that the the ARM hardware's format reader takes 'r' from
changed to
* Note that the the ARM hardware's format reader takes 'r' from
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621133107.3752-1-jiangjian@cdjrlc.com
Jiang Jian [Tue, 21 Jun 2022 14:01:51 +0000 (22:01 +0800)]
drm/panel: nt35510: Remove duplicate 'the' in two places.
file: ./drivers/gpu/drm/panel/panel-novatek-nt35510.c
line: 193,214,253
* amplification for the the step-up circuit:
changed to
* amplification for the step-up circuit:
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621140151.14404-1-jiangjian@cdjrlc.com
Philip Oberfichtner [Thu, 23 Jun 2022 11:22:58 +0000 (13:22 +0200)]
drm/panel: simple: Add DataImage FG1001L0DSSWMG01 panel support
Add DataImage FG1001L0DSSWMG01 10.1" 1280x800 TFT LCD panel support.
Signed-off-by: Philip Oberfichtner <pro@denx.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623112257.4178461-2-pro@denx.de
Philip Oberfichtner [Thu, 23 Jun 2022 11:22:56 +0000 (13:22 +0200)]
dt-bindings: display: simple: Add DataImage FG1001L0DSSWMG01 compatible string
Add DataImage FG1001L0DSSWMG01 10.1" 1280x800 TFT LCD panel compatible
string.
Signed-off-by: Philip Oberfichtner <pro@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623112257.4178461-1-pro@denx.de
Yang Yingliang [Tue, 14 Jun 2022 11:21:12 +0000 (19:21 +0800)]
drm/logicvc: add missing of_node_put() in logicvc_layers_init()
The of_node_put() need be called in error path in logicvc_layers_init().
Fixes:
efeeaefe9be5 ("drm: Add support for the LogiCVC display controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614112112.1537319-1-yangyingliang@huawei.com
Julia Lawall [Sun, 12 Jun 2022 11:02:31 +0000 (13:02 +0200)]
drm: fix device_node_continue.cocci warnings
drivers/gpu/drm/logicvc/logicvc_layer.c:616:2-13: ERROR: probable double put.
Device node iterators put the previous value of the index variable, so an
explicit put causes a double put.
Generated by: scripts/coccinelle/iterators/device_node_continue.cocci
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.22.394.2206121300120.3447@hadrien
Yang Li [Mon, 13 Jun 2022 01:26:58 +0000 (09:26 +0800)]
drm: Remove unnecessary print function dev_err()
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Eliminate the follow coccicheck warning:
./drivers/gpu/drm/logicvc/logicvc_drm.c:352:2-9: line 352 is redundant
because platform_get_irq() already prints an error
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613012658.85814-1-yang.lee@linux.alibaba.com
Dan Carpenter [Tue, 14 Jun 2022 12:08:53 +0000 (15:08 +0300)]
drm: logicvc: fix error code in logicvc_layer_init()
Return -EINVAL if logicvc_layer_formats_lookup() fails. Don't return
success.
Fixes:
efeeaefe9be5 ("drm: Add support for the LogiCVC display controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yqh6VdNiDvJYMOQ+@kili
Dan Carpenter [Tue, 14 Jun 2022 12:08:25 +0000 (15:08 +0300)]
drm: logicvc: Fix uninitialized variable in probe
The "regmap" is supposed to be initialized to NULL but it's used
without being initialized.
Fixes:
efeeaefe9be5 ("drm: Add support for the LogiCVC display controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yqh6OfSiPFuVrGo4@kili
KuoHsiang Chou [Thu, 23 Jun 2022 08:31:16 +0000 (16:31 +0800)]
drm/ast: Fixed the casting issue reported by sparse
V1:
1.Fixed sparse:cast truncates bits form constant value ()cast
truncates bits from constant value (
ffffffffffffff00 becomes 0)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623083116.35365-1-kuohsiang_chou@aspeedtech.com
Dave Airlie [Fri, 24 Jun 2022 02:07:36 +0000 (12:07 +1000)]
Merge tag 'drm-intel-next-2022-06-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- General driver clean-up (Jani, Ville, Julia)
- DG2 enabling (Anusha, Vandita)
- Fix sparse warnings (Imre, Jani)
- DMC MMIO range checks (Anusha)
- Audio related fixes (Jani)
- Runtime PM fixes (Anshuman)
- PSR fixes (Jouni, Jose)
- Media freq factor and per-gt enhancements (Ashutosh, Dale)
- DSI fixes for ICL+ (Jani)
- Disable DMC flip queue handlers (Imre)
- ADL_P voltage swing updates (Balasubramani)
- Use more the VBT for panel information (Ville, Animesh)
- Fix on Type-C ports with TBT mode (Vivek)
- Improve fastset and allow seamless M/N changes (Ville)
- Accept more fixed modes with VRR/DMRRS panels (Ville)
- FBC fix (Jose)
- Remove noise logs (Luca)
- Disable connector polling for a headless SKU (Jouni)
- Sanitize display underrun reporting (Ville)
- ADL-S display PLL w/a (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YrNzP2WTf3WBvpvd@intel.com
Dave Airlie [Fri, 24 Jun 2022 00:29:53 +0000 (10:29 +1000)]
Merge tag 'drm-misc-next-2022-06-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.20:
UAPI Changes:
* media: Add various RGB666 and RGB888 format constants
Cross-subsystem Changes:
* media: Documentation
Core Changes:
* aperture: Fix segfault during hot-unplug
* dp: Support waiting for HDP signal, plus driver updates;
Port-validation fixes
* fbcon: Improve scrolling performance; Sanitize input
* Clean up <drm/drm_crtc.h>
Driver Changes:
* amdgpu: Cleanups
* bridge: Add support for i.MX8qxp and i.MX8qm; anx7625: DPI fixes;
tc358775: Fix clock settings; ti-sn65dsi83: Allow GPIO to sleep
* panel: Set orientation from panel, plus driver updates
* Several small cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YrQeAAVvQ6jxu2dl@linux-uq9g