OSDN Git Service
Pankaj Bharadiya [Mon, 17 Oct 2016 09:12:36 +0000 (14:42 +0530)]
staging: greybus: audio: remove redundant slot field
gb_audio_manager_module_descriptor's intf_id field maintains the
information about the interface on which module is connected hence
having an extra slot field is redundant.
Thus remove the slot field and its associated code.
Signed-off-by: Pankaj Bharadiya <pankaj.bharadiya@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rahul Krishnan [Fri, 21 Oct 2016 15:29:28 +0000 (20:59 +0530)]
Staging: Greybus: Fix trailing */ in block comments
This patch fixes the following checkpath.pl warning
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Rahul Krishnan <mrahul.krishnan@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rui Miguel Silva [Wed, 19 Oct 2016 12:44:25 +0000 (13:44 +0100)]
staging: greybus: es2: fix arpc request size
Fix size field of arpc message request by using the header size and not
the pointer size.
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Fri, 14 Oct 2016 22:00:11 +0000 (19:00 -0300)]
staging: greybus: audio_manager_sysfs: Replace sscanf with kstrto* to single variable conversion.
Fix checkpatch warning:
WARNING: Prefer kstrto<type> to single variable sscanf
kstrto* is designed to convert string to numerical value and makes
it easier to understand what the code does.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Mon, 17 Oct 2016 23:57:58 +0000 (21:57 -0200)]
staging: xgifb: Remove unnecessary parentheses.
The removed parentheses are unnecessary and don't add readability.
Found using Coccinelle semantic patch:
@@ expression e, e1, e2; @@
e &=
(
(e1 == e2)
|
- (e1)
+ e1
)
@@ expression e, e1, e2; @@
e |=
(
(e1 == e2)
|
- (e1)
+ e1
)
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Tue, 18 Oct 2016 00:01:26 +0000 (22:01 -0200)]
staging: vt6656: Remove unnecessary parentheses.
The removed parentheses are unnecessary and don't add readability.
Found using Coccinelle semantic patch:
@@ expression e, e1, e2; @@
e +=
(
(e1 == e2)
|
- (e1)
+ e1
)
@@ expression e, e1, e2; @@
e =
(
(e1 == e2)
|
- (e1)
+ e1
)
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mihaela Muraru [Mon, 17 Oct 2016 14:20:18 +0000 (17:20 +0300)]
Staging: android: ion: Make a read-only structure
This patch add const qualifier at the declaration of the structure.
The structure become a read-only data, this increase the security.
Found with Coccinelle:
@r disable optional_qualifier@
identifier s,i;
@@
* static struct s i ={...};
Signed-off-by: Mihaela Muraru <mihaela.muraru21@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Tue, 18 Oct 2016 00:00:07 +0000 (22:00 -0200)]
staging: android: Remove unnecessary parentheses.
The removed parentheses are unnecessary and don't add readability.
Found using Coccinelle semantic patch:
@@ expression e, e1, e2; @@
e =
(
(e1 == e2)
|
- (e1)
+ e1
)
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 19 Oct 2016 22:58:54 +0000 (15:58 -0700)]
staging: vc04_services: Add casts to remove warnings in vchiq_core.c
When compiling vchiq_core.c for 64 bit, the compiler
emits a few warnings that are not actual issues. This
change adds a few casts to remove the extra unnecessary
warnings.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 19 Oct 2016 22:58:48 +0000 (15:58 -0700)]
staging: vc04_services: Handle conversion from VCHIQ_SERVICE_HANDLE_T to VCHI_SERVICE_HANDLE_T
A VCHIQ_SERVICE_HANDLE_T which is an int is stuffed into a
VCHI_SERVICE_HANDLE_T which is a pointer, passed around, then
converted back to a VCHIQ_SERVICE_HANDLE_T. Since the data is
always actually a VCHIQ_SERVICE_HANDLE_T(int), never actually a
pointer, it is safe to simply cast the two back in forth.
Note that pointers are never stuffed into an int.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 19 Oct 2016 22:58:34 +0000 (15:58 -0700)]
staging: vc04_services: Convert pointers in shared state to offsets
The arm processor core and the GPU have a shared data structure.
This structure contains pointers to base linux kernel objects such as
events. The size of the pointer changes between 32 bit and 64 bit,
so it is necessary to convert these pointers to offsets from the
beginning of the state structure.
Luckly, the GPU does not interpret these pointers/offsets,
but this change is necessary to keep the structure the same since
the GPU code is outside the scope of the linux kernel
and can't be easily changed.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 19 Oct 2016 22:58:27 +0000 (15:58 -0700)]
staging: vc04_services: Change fields of page list structure to fixed length
The arm processor core and the GPU have shared data structures.
One of these structures is a list of pages of data for messages.
This structure can not change since it is dependent on the GPU
firmware which is external to the kernel. Convert the fields
of this structure to fixed length fields.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Wed, 19 Oct 2016 22:58:09 +0000 (15:58 -0700)]
staging: vc04_services: Convert dsb() to dsb(sy)
The dsb() macro for 32 arm compiles to dsb(sy) in the binary file.
This macro is no longer supported on arm64, so instead use dsb(sy)
which is completely binary compatible.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 24 Oct 2016 09:34:22 +0000 (11:34 +0200)]
Merge tag 'iio-for-4.10a' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of IIO new device support, features and cleanups for the 4.10 cycle.
Fair number of outreachy related patches in here. Some of these may well
have already been picked up by Greg but git will sort that out for us.
Also some good staging cleanup work from other sources. Thanks Brian and Lars
in particular for this.
New device support
* ACCES 104-quad-8
- New driver for this 8 channel encoder input board. Lots of new ABI with
this one.
* AD7766
- New driver supporting AD7766, AD7766-1, AD7766-2, AD7767, AD7767-1 and
AD7767-2 24 bit ADCs.
* dmard 10
- New driver for this 3 axis accelerometer.
* Honeywell ABP pressure sensors.
- New driver covering 56 parts in this series (too many to list here!)
* HTS221
- New driver to support this relative humidiy and temperature device.
* LMP91000
- New driver for this potentiostat (form of chemical sensor). Nice example
of use of the buffered consumer interfaces and the use of a consumer
provided trigger.
* MiraMEMS DA311
- New driver for this 3 axis accelerometer.
* MiraMEMS DA280
- New driver for this 3 axis accelerometer. Follow up caught up with
vendor prefixes for these.
Staging graduations
* isl29018 light sensor
- Fixes and cleanups listed below (thanks for your hard work on this Brian!)
* sca3000
- Fixes and cleanups listed below. This was one of the small set of drivers
that went into staging when IIO was first added. Turns out it had a few
bugs and needed to be brought into the modern era! Not clear if I am
the only person who actually has one of these still wired to a board.
New features (Core)
- Add an iio_trigger_validate_own_device helper which relies on the device
and trigger having the same parent. Convenient to have this for some
of the more complex trigger / device interactions. Was hand rolled in
a few drivers already so good to bring it into the core.
- Add an iio_read_channel_offset in kernel access helper (similar to
the existing one for scale).
- IIO_ATTR_{RO, WO, RW} and IIO_DEVICE_ATTR_{RO, WO, RW} macros. These
lead some rather contrived function naming, but there is no denying they
do reduced boilerplate. I'm going to resist their introduction in
drivers 'unless' they form part of a larger set of cleanups.
- Counter channel type and index type.
New features (Drivers)
* hdc100x
- Triggered buffer support.
* mcp4725
- Device tree bindings and support.
- Voltage reference selection.
* ti-
adc0832
- Triggered buffer support.
* ti-adc161s626
- Add regulator support allowing _scale and _offset values to be established
and exported.
New features (Tools)
* iio_generic_buffer
- -A option to force enable all channels rather than faulting if some are
already enabled (like -a does). Followup patches tidied this support up.
Cleanups (Core)
- Use kmalloc_array in iio_scan_mask_set.
- Take event_attrs field of iio_info structure constant
- Staging todo list updates. Most of it was long done.
- MAINTAINERS had a wrong directory listing.
Cleanups (Drivers)
* Missing i2c trivial devices entries.
* ad5592r
- Fix an endian type related sparse warnings.
* ad7150
- Constify the event attribute_group structures.
* ad7152
- Add some blank lines to improve readability.
- Sampling frequency control via chan-info element rather than hand rolled
attributes.
- add a new lock to avoid use of mlock for non state change related locking.
* ad7280
- Constify atrribute_group structure (second patch covers the event ones)
* ad7606 (Lars is driving most of the cleanup on this with some additions from
Eva)
- Fix improper setting of oversampling pins. This has been broken a very
long time in this staging driver, so not going to push this back to stable.
- Implement oversampling configuration via the chan_info mask element.
- Remove an unused int_vref_mv field.
- Remove a reundant name field from ad7606_chip_info.
- Remove default device configuration from platform_data in favour of
whatever the power on defaults are.
- Remove out of band error reporting in the kernel log as not providing
much information.
- Fix oversampling ratio by having 1 be the value for no oversampling.
- Avoid allocating buffer for each data capture.
- Factor out common code between periodic and one-shot capture.
- Move set_drvdat into common code.
- Let the common probe function return int rather than jumping through
an ERR_PTR.
- Pass struct device * into common remove to simplify code.
- Always run trigger handler only once per event (no one can remember why
it was being possibly done twice).
- Move over to the GPIO descriptor API to shorten and clarify code.
- Move the buffer code into the main file as it's not optional and is
now rather short in this driver.
- Fix the naming of the supply regulator.
- Rework regulator handling to handle errors including deferred probing.
- Tidy up a ptr_err or 0 return.
* ad7746
- Sampling frequency control via info_mask element rather than hand rolled
* ad7758
- Sampling frequency control via info_mask element rather than hand rolled
attributes.
* ad7816
- Constify the event attribute_group structure.
* adt7316
- Constify the event attribute group structures.
* ak8974
- Cleanup some sparse warnings about endian types.
* ak8975
- Cleanup some sparse warnings about endian types.
* bmi160
- Spare endian warning cleanups.
* isl29018 (towards staging graduation)
- Remove unusedvariables and defines.
- Improve consistency of error handling.
- Signed / unsigned comparison fixes.
- Use the IIO_DEVICE_ATTR_{RO, RW} macros
- Fix a race in in_illuminance_scale_available_show.
- Cleanup exit points of _read_raw
- Sanity check if in suspended state during a write_raw call as was already
done for read_raw.
- Document device tree bidnings.
- Document infrared supression controls.
- Add some newlines to improve readability and drop one that shouldn't be
there.
- Fix a poorly named functions name.
- Fix multiline coment syntax.
- Tidy up a pair or return statements by unifying them.
- Rename description in Kconfig for consistency with similar drivers.
* lidar
- cleanup power management by dropping unnecessary call.
* ltr501
- Use the claim_direct_mode helpers. Fix a race condition along the way.
* max1027
- Fix a dubious x | !y sparse warning.
- Use the new iio_trigger_validate_own_device helper.
* max440000
- Clean up some sparse warnings about endian types.
* mcp4725
- Use the regulator framework to establish the reference voltage rather than
getting it from platform data.
- Tidy up a comment typo.
- Fix a wrong PTR_ERR query (wrong regulator).
* mma7660
- Take a mma7660_nscale static.
* mma8452
- Use the new iio_trigger_validate_own_device helper.
- Use claim_direct_mode helpers - fix a race condition along the way.
* mpl3115
- Use claim_direct_mode helpers - fix a race condition along the way.
* ms65611
- Tidy up regulator error handling and clean out a static warning in the mix.
* sca3000
- Avoid a potential unitialized variable if a hardware read returns a value
that isn't actually supported (mostly warning supression).
- Fix a use before setting of the indio_dev->buffer pointer. Broken for
a very long time so not going to rush this into stable.
- Merge buffer file with core file. We used to always split these.
Sometimes it's just not worth the hassle. In this case the device's main
feature is it's hardware fifos so unlikely anyone would want to run it
without.
- Drop the sca3000_register_ring_funcs function as it's a pointless wrapper
once we have only one file.
- Fix cleaning of flag + setting of size of scan. Without this you can't
start the buffer twice and expect sensible (or any) results. Again,
broken for a long time so not heading for stable.
- Drop the custom watershed setting ABI - for now we'll just support one
value.
- Move to a hybrid hard / soft buffer design (how we've been doing it
for similar devices for a while now!)
- Cleanup some unusued variables.
- Use a fake channel to support core handling of freefall event registration.
- Cleanup the register defines.
- Fix an off by one error in axis due to IIO_NO_MOD taking up the 0 value.
Been broken since first admission of IIO to the staging tree.
- Add readback of the 3db low pass filter frequency and later writing
allowing droppign of custom measurement mode attributes as they can
be represented by the filter choices that is their main characteristic.
- Drop non standard revision attr and replace with dev_info on probe.
- Avoid a race in probe.
- Various formatting fixes.
- Kernel-docify docs that were very nearly in the write format.
* tsl2583
- Constify attribute_group structure.
* zpa2326
- Drop a redundant DEBUG ifdef.
Cleanups (Tools)
* iio_generic_buffer
- Fix the ? arguement. Previously it sort of worked as you got the help
message as a result of it not recognising the arguement.
Julia Lawall [Sat, 22 Oct 2016 20:41:32 +0000 (22:41 +0200)]
iio: dac: mcp4725: fix odd_ptr_err.cocci warnings
PTR_ERR should access the value just tested by IS_ERR
Generated by: scripts/coccinelle/tests/odd_ptr_err.cocci
CC: Tomas Novotny <tomas@novotny.cz>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
kbuild test robot [Sat, 22 Oct 2016 19:12:42 +0000 (03:12 +0800)]
staging:iio:ad7606: fix ptr_ret.cocci warnings
drivers/staging/iio/adc/ad7606.c:357:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
CC: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Matt Ranostay [Sat, 15 Oct 2016 18:04:37 +0000 (11:04 -0700)]
iio: proximity: pulsedlight-lidar-lite-v2: cleanup power management
Remove pm_runtime_mark_last_busy() call that wasn't need in the probe
since the device should be put to sleep.
Clarification from Matt:
Basically it going to be suspended once pm_runtime_idle() is called,
and setting the last busy is useless and not needed.
Clearly this doesn't affect the device running but just makes the code
more consistent with other uses.
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Akinobu Mita [Sun, 16 Oct 2016 15:59:42 +0000 (00:59 +0900)]
iio: ti-
adc0832: add triggered buffer support
This adds triggered buffer support for the ti-
adc0832 driver. Tested with
ADC0831 and
ADC0832 by using SYSFS trigger.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Fri, 2 Sep 2016 17:23:17 +0000 (10:23 -0700)]
iio: humidity: hdc100x: add triggered buffer support for HDC100X
Triggered buffer support uses the HDC100X's dual acquisition mode
to read both humidity and temperature in one shot.
This patch depends on
447136effbf4 ("iio: humidity: hdc100x: fix sensor data reads of
temp and humidity")
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tomas Novotny [Tue, 18 Oct 2016 17:43:09 +0000 (19:43 +0200)]
iio: dac: mcp4725: add devicetree support
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tomas Novotny [Tue, 18 Oct 2016 17:43:08 +0000 (19:43 +0200)]
iio: dac: mcp4725: support voltage reference selection
MCP47x6 chip supports selection of a voltage reference (VDD, VREF buffered
or unbuffered). MCP4725 doesn't have this feature thus the eventual setting
is ignored and user is warned.
The setting is stored only in the volatile memory of the chip. You need to
manually store it to the EEPROM of the chip via 'store_eeprom' sysfs entry.
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tomas Novotny [Tue, 18 Oct 2016 17:43:07 +0000 (19:43 +0200)]
Documentation: dt: iio: add mcp4725/6 dac device binding
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tomas Novotny [Tue, 18 Oct 2016 17:43:06 +0000 (19:43 +0200)]
iio: dac: mcp4725: fix incorrect comment
Number 2 is referencing to the settings with the largest available
resistor.
No functional change.
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Thu, 20 Oct 2016 13:08:23 +0000 (21:08 +0800)]
staging: iio: ad7606: rework regulator handling
Currently, this driver ignores all errors from regulator_get(). The way
it is now, it also breaks probe deferral (EPROBE_DEFER). The correct
behavior is to propagate the error to the upper layers so they can
handle it accordingly.
Rework the regulator handling so that it matches the standard behavior.
If the specific design uses a static always-on regulator and does not
explicitly specify it, regulator_get() will return the dummy regulator.
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Thu, 20 Oct 2016 13:08:22 +0000 (21:08 +0800)]
staging: iio: ad7606: set proper supply name to devm_regulator_get()
The name passed to devm_regulator_get() should match the name of the
supply as specified in the device datasheet. The supply on this device
is called 'AVcc' while currently, the driver uses just 'vcc'.
Use 'avcc' to specify the supply voltage since it is custom to use the
lower-caps version of the datasheet name.
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:07:08 +0000 (19:07 +0200)]
staging:iio:ad7606: Move buffer code to main source file
Currently the ad7606 buffer handling code resides in its own source file.
But this file contains only 4 small functions of which half are just
wrappers around other functions. Buffer support is also always enabled for
this driver, so move them over to the main source file. This reduces the
amount of boilerplate code.
Also rename the main function from ad7606_core.c to ad7606.c since there is
only a single file now.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:07:07 +0000 (19:07 +0200)]
staging:iio:ad7606: Use GPIO descriptor API
Convert the ad7606 driver away from the deprecated legacy GPIO API and use
the new GPIO descriptor API.
This also means that the platform data struct is now empty and can be
removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:07:06 +0000 (19:07 +0200)]
staging:iio:ad7606: Run trigger handler only once per trigger event
Currently the ad7606 driver installs the same function for the hard-irq and
threaded trigger handlers. This was introduced in commit
1caf7cb46135
("staging:iio:adc:ad7606 Convert to new channel registration method Update
Add missing call to iio_trigger_notify_done() Set pollfunc top and bottom
half handler"). Unfortunately the commit message does not mention why this
was done and Michael does not remember either.
Since the trigger handler function is idempotent (set a GPIO to 1) running
it twice does not do any harm, but is simply not necessary either. So set
the threaded trigger handler for the driver to NULL.
While we are at it also remove the function description comment that does
no say anything that can't be derived from the function name itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:07:05 +0000 (19:07 +0200)]
staging:iio:ad7606: Let common remove function take a struct device *
Currently the common remove function takes a struct iio_dev *. This
parameter is retrieved by the individual driver remove functions by calling
get_drvdata() on their device. To simplify the code let the common remove
function directly take a struct dev * and do the IIO device in retrieval
the common remove function.
This also aligns the interface with the common probe function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:07:04 +0000 (19:07 +0200)]
staging:iio:ad7606: Let the common probe function return int
The common probe function for the ad7606 currently returns a struct iio_dev
pointer. The returned value is not used by the individual driver probe
functions other than for error checking.
Let the common probe function return a int instead to report the error
value directly (or 0 on success). This allows to simplify the code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:07:03 +0000 (19:07 +0200)]
staging:iio:ad7606: Move set_drvdata() into common code
Both the platform_device and SPI driver call set_drvdata() at the end of
their probe function. Move this into the common probe() function to reduce
duplicated code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:07:02 +0000 (19:07 +0200)]
staging:iio:ad7606: Factor out common code between periodic and one-shot capture
Both the periodic buffer based and one-shot sysfs based capture methods
share a large portion of their code. Factor this out into a common helper
function.
Also provide a comment that better explains in more detail what is going on
in the capture function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:07:01 +0000 (19:07 +0200)]
staging:iio:ad7606: Avoid allocating buffer for each data capture
Currently the ad7606 driver dynamically allocates and frees a transfer
buffer each time a sample capture is performed in buffered mode, which
introduces unnecessary overhead. The driver state struct already contains a
buffer that is used for transfers in one-shot mode. This buffer is large
enough to hold all samples, but not the timestamp that might be present in
buffered mode. Extend the buffer size to be able to contain the timestamp
and update the buffered capture function to use this buffer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:07:00 +0000 (19:07 +0200)]
staging:iio:ad7606: Use oversampling ratio of 1 for no oversampling
Currently the ad7606 driver uses a value of 0 for the oversampling ratio to
express that no oversampling is done. Strictly speaking this means though
that no data capture is done at all. Instead change the driver to use a
value of 1, this is in accordance with what other drivers do and what the
IIO spec suggests.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:06:59 +0000 (19:06 +0200)]
staging:iio:ad7606: Remove out-of-band error reporting
Currently the ad7606 driver prints a error message to the kernel log when
an application writes an invalid value to a sysfs attribute. While for
initial driver development and testing this might be useful it is quite
disadvantageous in a production environment. The write() call to the sysfs
attribute will already return an error if the value was invalid so the
application is aware that the operation failed. And generally speaking it
is impossible for an application to reliably match a log message in the
kernel log to a specific operation it performed, so the message becomes
just noise and might distract from more critical messages.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:06:58 +0000 (19:06 +0200)]
staging:iio:ad7606: Remove default device configuration from platform data
While for some very selected setups it might be useful to be able to
provide default configuration data via the platform data, generally this
becomes very impractical as the number of configuration options increases.
So the general policy is to use the power-on default values of the device
and let the application using the device configure it according to its
needs.
Implement this scheme for the ad7606 driver by removing support for
specifying a default configuration via the platform data.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:06:57 +0000 (19:06 +0200)]
staging:iio:ad7606: Remove redundant name field from ad7606_chip_info
The name field in the ad7606_chip_info struct is set to the same value as
the as the name field in the corresponding {platform,spi}_device_id table
entry. Remove it from the ad7606_chip_info struct and pass the name from
the ID to the probe function. This slightly reduces the size of the
chip_info table and adding new entries requires less boilerplate.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lars-Peter Clausen [Wed, 19 Oct 2016 17:06:56 +0000 (19:06 +0200)]
staging:iio:ad7606: Remove unused int_vref_mv field
Remove the int_vref_mv field from the ad7606_chip_info struct since the
field is never used by the driver. The value is also the same for all
derivatives of this chip, so if it will ever be used in the driver a
constant value will work just fine.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Thu, 20 Oct 2016 09:19:24 +0000 (17:19 +0800)]
tools: iio: iio_generic_buffer: drop unneeded parentheses
Remove extra parentheses introduced in commit <
73e176a tools: iio:
iio_generic_buffer: add -A to force-enable all channels>.
Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Thu, 20 Oct 2016 09:19:23 +0000 (17:19 +0800)]
tools: iio: iio_generic_buffer: rename and change type of force variable
Replace the type of 'force' flag from int to bool and at the same time
rename it to 'force_autochannels' for better readability.
Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lorenzo Bianconi [Thu, 13 Oct 2016 20:06:05 +0000 (22:06 +0200)]
Documentation: dt: iio: humidity: add hts221 sensor device binding
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lorenzo Bianconi [Thu, 13 Oct 2016 20:06:04 +0000 (22:06 +0200)]
iio: humidity: add support to hts221 rh/temp combo device
Add support to STM HTS221 humidity + temperature sensor
http://www.st.com/resource/en/datasheet/hts221.pdf
- continuous mode support
- i2c support
- spi support
- trigger mode support
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Sun, 16 Oct 2016 05:02:19 +0000 (22:02 -0700)]
iio: light: ltr501: claim direct mode during raw writes
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during all raw write operations.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Sun, 16 Oct 2016 05:00:53 +0000 (22:00 -0700)]
iio: light: ltr501: claim direct mode during select raw reads
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during required raw read cases.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:18 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 Move out of staging.
Now the driver is in a reasonable state, lets get it (finally) out
of staging.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:17 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 kernel docify comments that were nearly kernel doc.
Basic tidy up of comments to bring them into a standard style.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:16 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 small checkpatch fixes (alignment etc)
Tidied up where checkpatch warning suppressions doesn't effect the
readability of the code.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:15 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 Tidy up probe order to avoid a race.
Previously the device was exposed to userspace and in kernel consumers
before the interrupts had been configured. As nothing stopped them being
enabled in the interval this could cause unhandled interrupts.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:14 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 replace non standard revision attr with dev_info on probe
There seems little point in being able to query the part revision number
via sysfs. Hence just put it in the kernel logs during probe incase
anyone ever wants to know.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:13 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 Drop custom measurement mode attributes
This is now represented by the standard 3db filter frequency controls.
Things get complex wrt to the sampling frequency as these modes change
but that is fine under the IIO ABI where any value is allowed to effect
any other.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:12 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 Add write support to the low pass filter control
Also includes an available attribute. The ordering of values appears
a bit random, but as the ABI doesn't specify this and we already have
both rising and falling lists I think this is fine.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:11 +0000 (17:39 +0100)]
staging:iio:accel:sca3000: Fix off by one error in axis due to IIO_NO_MOD
Given the introduction of IIO_NO_MOD was prior to the first submission
prior to IIO entering staging this has been broken for a while.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:10 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 add readback of the 3db low pass filter frequency
Driving towards getting rid of the non standard mode control interface.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:09 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 Clean up register defines.
Introduce some more masks and generally drive towards consistent naming.
Note the small indents used to indicate parts of registers + parts of
multiplexed registers.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:08 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 use a 'fake' channel to handle freefall event registration.
This is an approach used in some newer drivers as it exposes the
compound channel events to the core rather than hiding their control
in sysfs attributes entirely via the driver.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:07 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 drop some unused variables.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:06 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 move to hybrid hard / soft buffer design.
In a similar fashion to other newer drivers (e.g. ti_am335x), instead
of using the hardware buffer support in IIO to directly access the hardware
fifo, insert a software fifo and feed that from the hardware one when
interrupts occur. This gives a simpler structure to the data flows and
allows more flexibility over how often data is shipped to userspace etc.
This was also the only direct user of the simplistic generalization found
in ring_hw.h so that header is removed.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:05 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 Drop custom ABI for watersheds.
For now we support only the 50% watershed interrupt and start and stop it
as part of the buffer bring up. The 75% case may come back in future.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:04 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 Fix clearing of flag + setting of size of scan.
Not clearing the stuff_to_read flag can lead to a false flag being set
on restarting the buffer if the data was not all read the previous time.
The size of the scan is needed to ensure the function
iio_buffer_read_first_n_outer actually tries to read the data.
This stuff has been broken for some time so not stable material.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:03 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 drop sca3000_register_ring_funcs
This was needed when the buffer support was optional. Pointless wrapper
now so drop it.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:02 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 merge files into one.
In the early days of IIO we were much more inclined to keep the impact
of the core IIO elements to the minimum. As time has moved on it has
become clear that hardly any builds are done without buffer support
and that it adds considerable complexity to the drivers.
Hence merge down the buffer and non buffer elements of the sca3000 driver
also allowing us to drop the header file used for the interfaces between
the two.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron [Sat, 8 Oct 2016 16:39:01 +0000 (17:39 +0100)]
staging:iio:accel:sca3000 Fix a use before setting of the indio_dev->buffer pointer.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Brian Masney [Mon, 10 Oct 2016 07:20:02 +0000 (03:20 -0400)]
staging: iio: isl29018: move out of staging
Move ISL29018/ISL29023/ISL29035 driver out of staging into mainline.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Mon, 10 Oct 2016 07:20:01 +0000 (03:20 -0400)]
staging: iio: isl29018: add ABI documentation for infrared suppression
Add ABI documentation from the ISL29018 Data Sheet (FN6619.4, Oct 8,
2012) about the infrared suppression that can be controlled
with the proximity_on_chip_ambient_infrared_suppression sysfs attribute.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Tue, 11 Oct 2016 19:33:12 +0000 (12:33 -0700)]
iio: pressure: mpl3115: claim direct mode during raw reads
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during raw reads.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Sat, 15 Oct 2016 14:55:06 +0000 (15:55 +0100)]
iio: accel: mma8452: claim direct mode during write raw
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during all write raw operations.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Tue, 11 Oct 2016 19:31:36 +0000 (12:31 -0700)]
iio: accel: mma8452: claim direct mode during raw reads
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during raw reads.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Fri, 14 Oct 2016 10:18:39 +0000 (18:18 +0800)]
tools: iio: iio_generic_buffer: add -A to force-enable all channels
If attribute/s is/are already enabled (by default or via scripts or
manual interaction), issuing -a will fail to enable the channels thereby
one has to manually disable the said attribute/s before proceeding with
auto-enabling.
Add a command-line option -A to force-activate all channels regardless
of their current state.
Suggested-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tomas Novotny [Tue, 11 Oct 2016 13:57:40 +0000 (15:57 +0200)]
iio: dac: mcp4725: use regulator framework
Use a standard framework to get the reference voltage. It is done that way
in the iio subsystem and it will simplify extending of the driver.
Structure mcp4725_platform_data is left undeleted because it used in the
next patch.
This change breaks the current users of the driver, but there is no
mainline user of struct mcp4725_platform_data.
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Crt Mori [Fri, 14 Oct 2016 13:43:14 +0000 (15:43 +0200)]
iio: ms65611_core: Fixes dereferencing regulator pointer
Change in handling of the regulator description means that static
checkers correctly assume we could be using dereferenced pointer to the
regulator. In reality we will never get the -ENODEV error, as current
behavior flow does not predict it, because:
If the device tree or board file does not define suitable regulators for
the component, it will be substituted by a dummy regulator, or, if
regulators are disabled altogether, by stubs.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Dan Carpenter [Tue, 11 Oct 2016 11:12:29 +0000 (14:12 +0300)]
Staging: iio: fix a MAINTAINERS entry
The "drivers/" part of the path name was missing.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
sayli karnik [Tue, 11 Oct 2016 11:37:21 +0000 (17:07 +0530)]
iio: bmi160_core: Fix sparse warning due to incorrect type in assignment
There is a type mismatch between the buffer which is of type s16 and the
samples stored, which are declared as __le16.
Fix the following sparse warning:
drivers/iio/imu/bmi160/bmi160_core.c:411:26: warning: incorrect type
in assignment (different base types)
drivers/iio/imu/bmi160/bmi160_core.c:411:26: expected signed short
[signed] [short] [explicitly-signed] <noident>
drivers/iio/imu/bmi160/bmi160_core.c:411:26: got restricted __le16
[addressable] [usertype] sample
This is a cosmetic-type patch since it does not alter code behaviour.
The le16 is going into a 16bit buf element, and is labelled as IIO_LE in the
channel buffer definition.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Mon, 10 Oct 2016 07:20:00 +0000 (03:20 -0400)]
staging: iio: isl29018: rename description in Kconfig for consistency
Rename description from "ISL 29018" to "Intersil 29018" in Kconfig for
consistency with other drivers in mainline.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Mon, 10 Oct 2016 07:19:59 +0000 (03:19 -0400)]
staging: iio: isl29018: remove blank line for consistency
Remove blank line between MODULE_DEVICE_TABLE() and its corresponding
structure for consistency with the other device table entries.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Mon, 10 Oct 2016 07:19:58 +0000 (03:19 -0400)]
staging: iio: isl29018: combine two return statements into one
Use the return value from isl29018_set_integration_time() as the return
value for isl29018_chip_init() since this is the last piece of work
inside that function.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Mon, 10 Oct 2016 07:19:57 +0000 (03:19 -0400)]
staging: iio: isl29018: fix multiline comment syntax
Change multiline comments from:
/* line1
* line2
* ...
*/
to
/*
* line1
* line2
* ...
*/
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Mon, 10 Oct 2016 07:19:56 +0000 (03:19 -0400)]
staging: iio: isl29018: fix poorly named function
isl29035_detect() did not just do chip detection. Move functionality directly
into isl29018_chip_init() to avoid naming confusion.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Mon, 10 Oct 2016 07:19:55 +0000 (03:19 -0400)]
staging: iio: isl29018: add newlines to improve readability
Add newlines to improve code readability in preparation for moving the
driver out of staging.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Sun, 9 Oct 2016 10:38:19 +0000 (11:38 +0100)]
staging:iio:TODO drop outdated entries in this todo.
There is still stuff to be done in the remaining drivers but pretty much
nothing was left from this original TODO.
Sorry Greg, should have been keeping this up to date.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Mon, 10 Oct 2016 06:20:48 +0000 (11:50 +0530)]
staging: iio: cdc: ad7152: Replace mlock with a local mutex lock
mlock is intended to protect only switches between modes.
Given this driver doesn't support more than one mode (sysfs polled reads
only), replace mlock with a local mutex lock.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Mon, 10 Oct 2016 10:01:31 +0000 (18:01 +0800)]
staging: iio: cdc: ad7746: implement IIO_CHAN_INFO_SAMP_FREQ
This driver predates the availability of IIO_CHAN_INFO_SAMP_FREQ
attribute wherein usage has some advantages like it can be accessed by
in-kernel consumers as well as reduces the code size.
Therefore, use IIO_CHAN_INFO_SAMP_FREQ to implement the
sampling_frequency attribute instead of using IIO_DEVICE_ATTR() macro.
Move code from the functions associated with IIO_DEVICE_ATTR() into
respective read and write hooks with the mask set to
IIO_CHAN_INFO_SAMP_FREQ.
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
sayli karnik [Mon, 10 Oct 2016 15:39:17 +0000 (21:09 +0530)]
staging: iio: cdc: ad7152: Implement IIO_CHAN_INFO_SAMP_FREQ attribute
Attributes that were once privately defined become standard with time
and hence a special global define is used. Hence update driver ad7152 to use
IIO_CHAN_INFO_SAMP_FREQ which is a global define instead of
IIO_DEV_ATTR_SAMP_FREQ.
Move functionality from IIO_DEV_ATTR_SAMP_FREQ attribute into
IIO_CHAN_INFO_SAMP_FREQ to implement the sampling_frequency attribute.
Modify ad7152_read_raw() and ad7152_write_raw() to allow reading and
writing the element as well. Also add a lock in the driver's private
data.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Varsha Rao [Sat, 15 Oct 2016 10:32:58 +0000 (16:02 +0530)]
Staging: vt6655: Replace dwIoBase by iobase
In this patch dwIoBase is renamed as iobase. This is done to fix the
checkpatch issue of CamelCase.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elizabeth Ferdman [Mon, 17 Oct 2016 06:46:30 +0000 (23:46 -0700)]
staging: rtl8188eu: core: constify local structure
Constify the static struct RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE.
The only other instance was one of its properties being assigned to a
variable:
Index2G = RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE.Index2G;
Therefore this is a good candidate for constification.
Running size did not show any difference:
Before/After:
text data bss dec hex filename
44122 408 2974 47504 b990
Lastly, break up the long line to fix the checkpatch warning and conform
to kernel coding style.
Signed-off-by: Elizabeth Ferdman <gnudevliz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Mon, 17 Oct 2016 02:15:47 +0000 (00:15 -0200)]
staging: rtl8192e: Compress return logic into one line.
Simplify return logic to avoid unnecessary variable assignments.
Coccinelle was used with this semantic patch:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Mon, 17 Oct 2016 02:17:20 +0000 (00:17 -0200)]
staging: xgifb: Compress return logic into one line.
Simplify return logic to avoid unnecessary variable assignments.
Coccinelle was used with this semantic patch:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Mon, 17 Oct 2016 02:18:58 +0000 (00:18 -0200)]
staging: vt6656: Compress return logic into one line.
Compress the return logic into one line avoids unnecessary variable
declarations. In this case it also makes it easier to understand the
function.
Coccinelle was used to find this return statement. However, additional
compressions were done to make the function clearer.
Semantic patch:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mihaela Muraru [Sat, 15 Oct 2016 22:41:14 +0000 (01:41 +0300)]
Staging: unisys: visorbus: Make a read-only structure
This patch add const qualifier at the declaration of the structure.
The structure become a read-only data, this increase the security.
Signed-off-by: Mihaela Muraru <mihaela.muraru21@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabitha George [Sun, 16 Oct 2016 16:14:26 +0000 (21:44 +0530)]
staging: ks7010: Remove braces around single statement blocks
Fixes checkpatch warning: braces{} are not necessary for
single statment blocks
Signed-off-by: Sabitha George <sabitha.george@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabitha George [Sun, 16 Oct 2016 16:12:44 +0000 (21:42 +0530)]
staging: ks7010: Add blank line after declarations
Fixes checkpatch.pl warning :Missing a blank line
after declarations
Signed-off-by: Sabitha George <sabitha.george@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Sat, 15 Oct 2016 22:26:26 +0000 (19:26 -0300)]
staging: wilc1000: Remove unnecessary extern variables.
Extern variables and functions used in only one file were removed
from .h files, and made static in the .c files they're used.
Extern variable wilc_initialized was declared and never used, so it was
removed.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mihaela Muraru [Sat, 15 Oct 2016 21:55:22 +0000 (00:55 +0300)]
Staging: vt6656: Make a read-only structure
This patch add const qualifier at the declaration of the structure.
The structure become a read-only data, this increase the security.
Signed-off-by: Mihaela Muraru <mihaela.muraru21@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laurent Navet [Sat, 15 Oct 2016 09:50:11 +0000 (11:50 +0200)]
staging: unisys: visorbus: add missing include
this removes lots of sparse warnings :
warning: symbol 'visorchannel_destroy' was not declared. Should it be static?
warning: symbol 'visorchannel_get_physaddr' was not declared. Should it be static?
warning: symbol 'visorchannel_get_nbytes' was not declared. Should it be static?
warning: symbol 'visorchannel_uuid_id' was not declared. Should it be static?
warning: symbol 'visorchannel_id' was not declared. Should it be static?
warning: symbol 'visorchannel_zoneid' was not declared. Should it be static?
warning: symbol 'visorchannel_get_clientpartition' was not declared. Should it be static?
warning: symbol 'visorchannel_set_clientpartition' was not declared. Should it be static?
warning: symbol 'visorchannel_read' was not declared. Should it be static?
warning: symbol 'visorchannel_write' was not declared. Should it be static?
warning: symbol 'visorchannel_get_header' was not declared. Should it be static?
warning: symbol 'visorchannel_create' was not declared. Should it be static?
warning: symbol 'visorchannel_create_with_lock' was not declared. Should it be static?
Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikhail Golubev [Fri, 14 Oct 2016 08:58:08 +0000 (11:58 +0300)]
staging:vt6656:baseband.h: fix function definition argument without identifier name issue
Function definitions arguments should also have an identifier name as
reported by checkpatch.pl.
Signed-off-by: Mikhail Golubev <golubev.mikhail@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Sat, 15 Oct 2016 00:35:13 +0000 (21:35 -0300)]
staging: dgnc: Add const qualifier to struct declaration.
Const qualifier added to struct declaration to avoid data overwrite
during runtime and improve security.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Sat, 15 Oct 2016 00:32:03 +0000 (21:32 -0300)]
staging: sm750fb: Add const qualifier to struct declaration.
Const qualifier added to struct declaration to avoid data overwrite
during runtime and improve security.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Sat, 15 Oct 2016 06:13:48 +0000 (11:43 +0530)]
Staging: android: ion: constify dma_buf_ops structure
The dma_buf_ops structure is stored in the ops field of a
dma_buf_export_info structure and also used as a condition inside the
if() statement. The if condition does not modify its value and the
ops field is of type const struct *dma_buf_ops, so dma_buf_ops
structures having this property can be declared as const.
File size before:
text data bss dec hex filename
14471 819 224 15514 3c9a
drivers/staging/android/ion/ion.o
File size after:
text data bss dec hex filename
14599 707 224 15530 3caa
drivers/staging/android/ion/ion.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bhumika Goyal [Sat, 15 Oct 2016 06:58:01 +0000 (12:28 +0530)]
Staging: greybus: uart: constify tty_port_operations structure
Declare tty_port_operations structure as const as it is only stored in
the ops field of a tty_port structure which is a field of a gb_tty
structure. The ops field is of type const struct tty_port_operations *,
so tty_port_operations structures having this property can be
declared as const.
Done using Coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct tty_port_operations i@p = {...};
@ok1@
identifier r1.i;
position p;
struct gb_tty q;
@@
q.port.ops=&i@p
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct tty_port_operations i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct tty_port_operations i;
File size before:
text data bss dec hex filename
7646 512 56 8214 2016 drivers/staging/greybus/uart.o
File size after:
text data bss dec hex filename
7710 448 56 8214 2016 drivers/staging/greybus/uart.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Reviewed-by: David Lin <dtwlin@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sayli karnik [Sun, 16 Oct 2016 08:49:48 +0000 (14:19 +0530)]
staging: greybus: es2: Use kmemdup instead of kmalloc and memcpy
This patch replaces kmalloc and memcpy with kmemdup for duplication of
memory.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pankaj Bharadiya [Sun, 16 Oct 2016 09:59:14 +0000 (15:29 +0530)]
staging: greybus: audio: Rename cport with intf_id
gb_audio_manager_module_descriptor's cport field is actually used to
manage and pass interface id to user space.
Thus rename gb_audio_manager_module_descriptor's 'cport' field and
few other things to avoid confusion.
Signed-off-by: Pankaj Bharadiya <pankaj.bharadiya@gmail.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>