OSDN Git Service
Peter Maydell [Thu, 14 Sep 2017 17:43:16 +0000 (18:43 +0100)]
target/arm: Use M_REG_NUM_BANKS rather than hardcoding 2
Use a symbolic constant M_REG_NUM_BANKS for the array size for
registers which are banked by M profile security state, rather
than hardcoding lots of 2s.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id:
1505137930-13255-2-git-send-email-peter.maydell@linaro.org
Peter Maydell [Thu, 14 Sep 2017 15:33:02 +0000 (16:33 +0100)]
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-
20170914' into staging
HMP pull 2017-09-14
# gpg: Signature made Thu 14 Sep 2017 15:57:30 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-hmp-
20170914:
hmp: introduce 'info memory_size_summary' command
qmp: introduce query-memory-size-summary command
hmp: extend "info numa" with hotplugged memory information
tests/hmp: test "none" machine with memory
dump: do not dump non-existent guest memory
hmp: fix "dump-quest-memory" segfault (arm)
hmp: fix "dump-quest-memory" segfault (ppc)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Vadim Galitsyn [Tue, 29 Aug 2017 15:30:22 +0000 (17:30 +0200)]
hmp: introduce 'info memory_size_summary' command
Add 'info memory_size_summary' command which is a sibling
of QMP command query-memory-size-summary. It provides the
following memory information in bytes:
* base-memory - size of "base" memory specified with command line option -m.
* plugged-memory - amount of memory that was hot-plugged.
If target does not have CONFIG_MEM_HOTPLUG enabled, no
value is reported.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <
20170829153022.27004-4-vadim.galitsyn@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up comments from Igor's review
Vadim Galitsyn [Tue, 29 Aug 2017 15:30:21 +0000 (17:30 +0200)]
qmp: introduce query-memory-size-summary command
Add a new query-memory-size-summary command which provides the
following memory information in bytes:
* base-memory - size of "base" memory specified with command line option -m.
* plugged-memory - amount of memory that was hot-plugged.
If target does not have CONFIG_MEM_HOTPLUG enabled, no
value is reported.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <
20170829153022.27004-3-vadim.galitsyn@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixup comments as per Igor's review
Added 'of' from Vadim's reply
Vadim Galitsyn [Tue, 29 Aug 2017 15:30:20 +0000 (17:30 +0200)]
hmp: extend "info numa" with hotplugged memory information
Report amount of hotplugged memory in addition to total
amount per NUMA node.
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <
20170829153022.27004-2-vadim.galitsyn@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Laurent Vivier [Wed, 13 Sep 2017 14:20:36 +0000 (16:20 +0200)]
tests/hmp: test "none" machine with memory
and add a test case of dump-guest-memory without
"[begin length]" parameters.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <
20170913142036.2469-5-lvivier@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cornelia Huck [Wed, 13 Sep 2017 14:20:35 +0000 (16:20 +0200)]
dump: do not dump non-existent guest memory
It does not really make sense to dump memory that is not there.
Moreover, that fixes a segmentation fault when calling dump-guest-memory
with no filter for a machine with no memory defined.
New behaviour is:
(qemu) dump-guest-memory /dev/null
dump: no guest memory to dump
(qemu) dump-guest-memory /dev/null 0 4096
dump: no guest memory to dump
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20170913142036.2469-4-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Laurent Vivier [Wed, 13 Sep 2017 14:20:34 +0000 (16:20 +0200)]
hmp: fix "dump-quest-memory" segfault (arm)
Running QEMU with
qemu-system-aarch64 -M none -nographic -m 256
and executing
dump-guest-memory /dev/null 0 8192
results in segfault
Fix by checking if we have CPU, and exit with
error if there is no CPU:
(qemu) dump-guest-memory /dev/null
this feature or command is not currently supported
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <
20170913142036.2469-3-lvivier@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Laurent Vivier [Wed, 13 Sep 2017 14:20:33 +0000 (16:20 +0200)]
hmp: fix "dump-quest-memory" segfault (ppc)
Running QEMU with
qemu-system-ppc64 -M none -nographic -m 256
and executing
dump-guest-memory /dev/null 0 8192
results in segfault
Fix by checking if we have CPU, and exit with
error if there is no CPU:
(qemu) dump-guest-memory /dev/null
this feature or command is not currently supported
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20170913142036.2469-2-lvivier@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Peter Maydell [Thu, 14 Sep 2017 14:49:30 +0000 (15:49 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/usb-
20170913-pull-request' into staging
usb: misc small fixes.
# gpg: Signature made Wed 13 Sep 2017 10:28:25 BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/usb-
20170913-pull-request:
usb: only build usb-host with CONFIG_USB=y
usb: drop HOST_USB
MAINTAINERS: add missing USB entry
xhci: Avoid DMA when ERSTBA is set to zero
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dr. David Alan Gilbert [Thu, 14 Sep 2017 12:36:09 +0000 (13:36 +0100)]
sparc: Fix typedef clash
Older compilers (rhel6) don't like redefinition of typedefs
Fixes:
12a6c15ef31c98ecefa63e91ac36955383038384
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20170914123609.497-1-dgilbert@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 14 Sep 2017 12:44:17 +0000 (13:44 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/ui-
20170913-pull-request' into staging
ui: console fixes
drop pixman submodule
# gpg: Signature made Wed 13 Sep 2017 09:40:34 BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/ui-
20170913-pull-request:
console: add question-mark escape operator
console: fix dpy_gfx_replace_surface assert
pixman: drop configure switches
pixman: drop submodule
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 14 Sep 2017 11:58:13 +0000 (12:58 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/vga-
20170913-pull-request' into staging
vga: bugfixes.
qxl: chunked cursor support.
# gpg: Signature made Wed 13 Sep 2017 08:41:08 BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/vga-
20170913-pull-request:
virtio-gpu: don't clear QemuUIInfo information on reset
vga/migration: Update memory map in post_load
qxl: add support for chunked cursors.
qxl: drop mono cursor support
vga: stop passing pointers to vga_draw_line* functions
vga: fix display update region calculation (split screen)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Fri, 8 Sep 2017 11:12:17 +0000 (13:12 +0200)]
usb: only build usb-host with CONFIG_USB=y
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id:
20170908111217.21985-3-kraxel@redhat.com
Gerd Hoffmann [Fri, 8 Sep 2017 11:12:16 +0000 (13:12 +0200)]
usb: drop HOST_USB
Nowdays we use libusb for usb-host, so we don't have different code
for linux vs. bsd any more. So there is little reason to have the
HOST_USB variable, we can just write things directly into the Makefile
and avoid a pointless indirection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id:
20170908111217.21985-2-kraxel@redhat.com
Philippe Mathieu-Daudé [Fri, 8 Sep 2017 17:36:24 +0000 (14:36 -0300)]
MAINTAINERS: add missing USB entry
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Alexey Kardashevskiy [Mon, 11 Sep 2017 06:56:06 +0000 (16:56 +1000)]
xhci: Avoid DMA when ERSTBA is set to zero
The existing XHCI code reads the Event Ring Segment Table Base Address
Register (ERSTBA) every time when it is changed. However zero is its
default state so one would think that zero there means it is not in use.
This adds a check for ERSTBA in addition to the existing check for
the Event Ring Segment Table Size Register (ERSTSZ).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id:
20170911065606.40600-1-aik@ozlabs.ru
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Alexander Graf [Tue, 29 Aug 2017 11:38:18 +0000 (13:38 +0200)]
console: add question-mark escape operator
Some termcaps (found using SLES11SP1) use [? sequences. According to man
console_codes (http://linux.die.net/man/4/console_codes) the question mark
is a nop and should simply be ignored.
This patch does exactly that, rendering screen output readable when
outputting guest serial consoles to the graphical console emulator.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id:
20170829113818.42482-1-agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 6 Sep 2017 14:21:09 +0000 (16:21 +0200)]
console: fix dpy_gfx_replace_surface assert
virtio-gpu can trigger the assert added by commit "
6905b93447 console:
add same surface replace pre-condition" in multihead setups (where
surface can be NULL for secondary displays). Allow surface being NULL.
Fixes:
6905b93447a42e606dfd126b90f75f4cd3c6fe94
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id:
20170906142109.2685-1-kraxel@redhat.com
Gerd Hoffmann [Tue, 5 Sep 2017 14:01:16 +0000 (16:01 +0200)]
pixman: drop configure switches
Remove pixman switches from configure, should not be needed any more,
configure can figure by itself whenever pixman is needed or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id:
20170905140116.28181-3-kraxel@redhat.com
Gerd Hoffmann [Tue, 5 Sep 2017 14:01:15 +0000 (16:01 +0200)]
pixman: drop submodule
Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more. While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id:
20170905140116.28181-2-kraxel@redhat.com
Gerd Hoffmann [Wed, 6 Sep 2017 14:20:58 +0000 (16:20 +0200)]
virtio-gpu: don't clear QemuUIInfo information on reset
Don't reset window layout information (passed via virtio_gpu_ui_info) on
device reset, so the user interface window layout will be kept intact
over reboots. The head size and position was commented out already, so
this patch just drops the dead code. Additionally the enabled head mask
must be kept so multihead setups work properly too.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=
1460595
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id:
20170906142058.2460-1-kraxel@redhat.com
Philippe Mathieu-Daudé [Mon, 11 Sep 2017 02:28:39 +0000 (23:28 -0300)]
tcg/tci: do not use ldst label (never implemented)
changed in
659ef5cbb893, this fixes building with --enable-tcg-interpreter:
/home/travis/build/qemu/qemu/tcg/tcg.c:116:14: error: ‘tcg_out_ldst_finalize’ used but never defined [-Werror]
static bool tcg_out_ldst_finalize(TCGContext *s);
^
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20170911022839.23231-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 11 Sep 2017 10:44:30 +0000 (11:44 +0100)]
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-signed' into staging
Update OpenBIOS images
# gpg: Signature made Mon 11 Sep 2017 08:08:39 BST
# gpg: using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-openbios-signed:
Update OpenBIOS images to
314d4f8 built from submodule.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 11 Sep 2017 09:27:07 +0000 (10:27 +0100)]
Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-2.11-pull-request' into staging
# gpg: Signature made Sun 10 Sep 2017 17:17:28 BST
# gpg: using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier/tags/m68k-for-2.11-pull-request:
target/m68k: Switch fpu_rom from make_floatx80() to make_floatx80_init()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark Cave-Ayland [Mon, 11 Sep 2017 06:43:34 +0000 (07:43 +0100)]
Update OpenBIOS images to
314d4f8 built from submodule.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Kamil Rytarowski [Mon, 4 Sep 2017 21:23:06 +0000 (23:23 +0200)]
target/m68k: Switch fpu_rom from make_floatx80() to make_floatx80_init()
GCC 4.7.2 on SunOS reports that the values assigned to array members are not
real constants:
target/m68k/fpu_helper.c:32:5: error: initializer element is not constant
target/m68k/fpu_helper.c:32:5: error: (near initialization for 'fpu_rom[0]')
rules.mak:66: recipe for target 'target/m68k/fpu_helper.o' failed
Convert the array to make_floatx80_init() to fix it.
Replace floatx80_pi-like constants with make_floatx80_init() as they are
defined as make_floatx80().
This fixes build on SmartOS (Joyent).
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20170904212306.3020-1-n54@gmx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Peter Maydell [Fri, 8 Sep 2017 15:04:42 +0000 (16:04 +0100)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: patches queued before 2.10
A bunch of stuff that was posted before the 2.10 timeframe,
mostly fixes/cleanups. New PCI bridges.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 08 Sep 2017 14:15:34 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
fw_cfg: rename read callback
pci: add reserved slot check to do_pci_register_device()
pci: move check for existing devfn into new pci_bus_devfn_available() helper
vmgenid: replace x-write-pointer-available hack
vhost-user-bridge: fix resume regression (since 2.9)
libvhost-user: support resuming vq->last_avail_idx based on used_idx
acpi/vmgenid: change device category to misc
intel_iommu: fix missing BQL in pt fast path
docs: update documentation considering PCIE-PCI bridge
hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root Port
hw/pci: introduce bridge-only vendor-specific capability to provide some hints to firmware
hw/pci: introduce pcie-pci-bridge device
Revert "ACPI: don't call acpi_pcihp_device_plug_cb on xen"
hw/acpi: Move acpi_set_pci_info to pcihp
hw/acpi: Limit hotplug to root bus on legacy mode
pc: add 2.11 machine types
vhost: Release memory references on cleanup
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 8 Sep 2017 13:44:44 +0000 (14:44 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.11-
20170908' into staging
ppc patch queue 2017-09-08
This is the first batch of ppc related patches for qemu-2.11, and it's
accumulated quite a few things. Includes:
* A cleanup to handling of ppc cpu models from Igor
* First parts of fixes to handling of guest vs. host SMT modes from
Sam Bobroff
* Preliminary patches towards supporting the Sam460 board from
Balaton Zoltan
* Several fixes for hotplug logic
* Assorted other fixes and cleanups
# gpg: Signature made Fri 08 Sep 2017 06:28:42 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.11-
20170908: (40 commits)
ppc: spapr: Move VCPU ID calculation into sPAPR
ppc: remove non implemented cpu models
ppc: drop caching ObjectClass from PowerPCCPUAlias
ppc: simplify cpu model lookup by PVR
ppc: replace inter-function cyclic dependency/recurssion with 2 simple lookups
ppc: make cpu alias point only to real cpu models
ppc: make cpu_model translation to type consistent
ppc: use macros to make cpu type name from string literal
target/ppc: Remove old STATUS file
PPC: KVM: Support machine option to set VSMT mode
spapr: fallback to raw mode if best compat mode cannot be set during CAS
hw/nvram/spapr_nvram: Device can not be created by the users
hw/ppc/spapr_cpu_core: Add a proper check for spapr machine
ppc4xx: Export ECB and PLB emulation
ppc4xx_i2c: Move to hw/i2c
ppc4xx_i2c: QOMify
ppc4xx: Split off 4xx I2C emulation from ppc405_uc to its own file
ppc4xx: Make MAL emulation more generic
ppc4xx: Move MAL from ppc405_uc to ppc4xx_devs
spapr_iommu: Realloc guest visible TCE table when hot(un)plugging vfio-pci
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Marc-André Lureau [Mon, 7 Aug 2017 18:16:11 +0000 (20:16 +0200)]
fw_cfg: rename read callback
The callback is called on select.
Furthermore, the next patch introduced a new callback, so rename the
function type with a generic name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mark Cave-Ayland [Sun, 16 Jul 2017 20:27:34 +0000 (21:27 +0100)]
pci: add reserved slot check to do_pci_register_device()
Add a new slot_reserved_mask bitmask to PCIBus indicating whether or not each
PCI slot on the bus is reserved. Ensure that it is initialised to zero to
maintain the existing behaviour that all slots are available by default, and
add the additional check with appropriate error reporting to
do_pci_register_device().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mark Cave-Ayland [Sun, 16 Jul 2017 20:27:33 +0000 (21:27 +0100)]
pci: move check for existing devfn into new pci_bus_devfn_available() helper
Also touch up the logic in do_pci_register_device() accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Marc-André Lureau [Mon, 7 Aug 2017 16:45:13 +0000 (18:45 +0200)]
vmgenid: replace x-write-pointer-available hack
This compat property sole function is to prevent the device from being
instantiated. Instead of requiring an extra compat property, check if
fw_cfg has DMA enabled.
fw_cfg is a built-in device that is initialized very early by the
machine init code. We have at least one other device that also
assumes fw_cfg_find() can be safely used on realize: pvpanic.
This has the additional benefit of handling other cases properly, like:
$ qemu-system-x86_64 -device vmgenid -machine none
qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide
$ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.9 -global fw_cfg.dma_enabled=off
qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide
$ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.6 -global fw_cfg.dma_enabled=on
[boots normally]
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Marc-André Lureau [Tue, 29 Aug 2017 15:27:51 +0000 (17:27 +0200)]
vhost-user-bridge: fix resume regression (since 2.9)
Commit
e10e798c85c2331 switched to libvhost-user which lacked support
for resuming the avail_idx based on used_idx.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=
1485867
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Marc-André Lureau [Tue, 29 Aug 2017 15:27:50 +0000 (17:27 +0200)]
libvhost-user: support resuming vq->last_avail_idx based on used_idx
This is the same workaround as commit
523b018dde3b765, which was lost
with libvhost-user transition in commit
e10e798c85c2331.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yoni Bettan [Tue, 5 Sep 2017 08:46:34 +0000 (11:46 +0300)]
acpi/vmgenid: change device category to misc
Moved vmgenid from uncategorized to misc category in QEMU help menu
Signed-off-by: Yoni Bettan <ybettan@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Thu, 17 Aug 2017 05:56:14 +0000 (13:56 +0800)]
intel_iommu: fix missing BQL in pt fast path
In vtd_switch_address_space() we did the memory region switch, however
it's possible that the caller of it has not taken the BQL at all. Make
sure we have it.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Aleksandr Bezzubikov [Thu, 17 Aug 2017 23:36:50 +0000 (02:36 +0300)]
docs: update documentation considering PCIE-PCI bridge
Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Aleksandr Bezzubikov [Thu, 17 Aug 2017 23:36:49 +0000 (02:36 +0300)]
hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root Port
To enable hotplugging of a newly created pcie-pci-bridge,
we need to tell firmware (e.g. SeaBIOS) to reserve
additional buses or IO/MEM/PREF space for pcie-root-port.
Additional bus reservation allows us to hotplug pcie-pci-bridge into this root port.
The number of buses and IO/MEM/PREF space to reserve are provided to the device via
a corresponding property, and to the firmware via new PCI capability.
The properties' default values are -1 to keep default behavior unchanged.
Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Aleksandr Bezzubikov [Thu, 17 Aug 2017 23:36:48 +0000 (02:36 +0300)]
hw/pci: introduce bridge-only vendor-specific capability to provide some hints to firmware
On PCI init PCI bridges may need some extra info about bus number,
IO, memory and prefetchable memory to reserve. QEMU can provide this
with a special vendor-specific PCI capability.
Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Aleksandr Bezzubikov [Thu, 17 Aug 2017 23:36:47 +0000 (02:36 +0300)]
hw/pci: introduce pcie-pci-bridge device
Introduce a new PCIExpress-to-PCI Bridge device,
which is a hot-pluggable PCI Express device and
supports devices hot-plug with SHPC.
This device is intended to replace the DMI-to-PCI Bridge.
Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Anthony PERARD [Wed, 6 Sep 2017 13:40:33 +0000 (14:40 +0100)]
Revert "ACPI: don't call acpi_pcihp_device_plug_cb on xen"
This reverts commit
153eba4726dfa1bdfc31d1fe973b2a61b9035492.
This patch prevents PCI passthrough hotplug on Xen. Even if the Xen tool
stack prepares its own ACPI tables, we still rely on QEMU for hotplug
ACPI notifications.
The original issue is fixed by the two previous patch:
hw/acpi: Limit hotplug to root bus on legacy mode
hw/acpi: Move acpi_set_pci_info to pcihp
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Anthony PERARD [Wed, 6 Sep 2017 13:40:32 +0000 (14:40 +0100)]
hw/acpi: Move acpi_set_pci_info to pcihp
HW part of ACPI PCI hotplug in QEMU depends on ACPI_PCIHP_PROP_BSEL
being set on a PCI bus that supports ACPI hotplug. It should work
regardless of the source of ACPI tables (QEMU generator/legacy SeaBIOS/Xen).
So move ACPI_PCIHP_PROP_BSEL initialization into HW ACPI implementation
part from QEMU's ACPI table generator.
To do PCI passthrough with Xen, the property ACPI_PCIHP_PROP_BSEL needs
to be set, but this was done only when ACPI tables are built which is
not needed for a Xen guest. The need for the property starts with commit
"pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice"
(
f0c9d64a68b776374ec4732424a3e27753ce37b6).
Adding find_i440fx into stubs so that mips-softmmu target can be built.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Anthony PERARD [Wed, 6 Sep 2017 13:40:31 +0000 (14:40 +0100)]
hw/acpi: Limit hotplug to root bus on legacy mode
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Marcel Apfelbaum [Wed, 6 Sep 2017 14:26:57 +0000 (17:26 +0300)]
pc: add 2.11 machine types
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Alex Williamson [Thu, 7 Sep 2017 20:27:09 +0000 (14:27 -0600)]
vhost: Release memory references on cleanup
vhost registers a MemoryListener where it adds and removes references
to MemoryRegions as the MemoryRegionSections pass through. The
region_add callback is invoked for each existing section when the
MemoryListener is registered, but unregistering the MemoryListener
performs no reciprocal region_del callback. It's therefore the
owner of the MemoryListener's responsibility to cleanup any persistent
changes, such as these memory references, after unregistering.
The consequence of this bug is that if we have both a vhost device
and a vfio device, the vhost device will reference any mmap'd MMIO of
the vfio device via this MemoryListener. If the vhost device is then
removed, those references remain outstanding. If we then attempt to
remove the vfio device, it never gets finalized and the only way to
release the kernel file descriptors is to terminate the QEMU process.
Fixes:
dfde4e6e1a86 ("memory: add ref/unref calls")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org # v1.6.0+
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Fri, 8 Sep 2017 11:57:28 +0000 (12:57 +0100)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 08 Sep 2017 03:00:34 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
colo-compare: Update the COLO document to add the IOThread configuration
colo-compare: Use IOThread to Check old packet regularly and Process pactkets of the primary
qemu-iothread: IOThread supports the GMainContext event loop
net/colo-compare.c: Fix comments and scheme
net/colo-compare.c: Adjust net queue pop order for performance
net/colo-compare.c: Optimize unpredictable tcp options comparison
e1000: Rename the SEC symbol to SEQEC
net/socket: Improve -net socket error reporting
net/net: Convert parse_host_port() to Error
net/socket: Convert several helper functions to Error
net/socket: Don't treat odd socket type as SOCK_STREAM
MAINTAINERS: Update mail address for COLO Proxy
net: rtl8139: do not use old_mmio accesses
net/rocker: Fix the unusual macro name
net/rocker: Convert to realize()
net/rocker: Plug memory leak in pci_rocker_init()
net/rocker: Remove the dead error handling
net/filter-rewriter.c: Fix rewirter checksum bug when use virtio-net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 8 Sep 2017 10:38:55 +0000 (11:38 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-
20170907' into staging
TCG constant pools
# gpg: Signature made Thu 07 Sep 2017 23:35:45 BST
# gpg: using RSA key 0x64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-
20170907: (23 commits)
tcg/ppc: Use constant pool for movi
tcg/ppc: Look for shifted constants
tcg/ppc: Change TCG_REG_RA to TCG_REG_TB
tcg/arm: Use constant pool for call
tcg/arm: Use constant pool for movi
tcg/arm: Extract INSN_NOP
tcg/arm: Code rearrangement
tcg/arm: Tighten tlb indexing offset test
tcg/arm: Improve tlb load for armv7
tcg/sparc: Use constant pool for movi
tcg/sparc: Introduce TCG_REG_TB
tcg/aarch64: Use constant pool for movi
tcg/s390: Use constant pool for cmpi
tcg/s390: Use constant pool for xori
tcg/s390: Use constant pool for ori
tcg/s390: Use constant pool for andi
tcg/s390: Use constant pool for movi
tcg/s390: Fix sign of patch_reloc addend
tcg/s390: Introduce TCG_REG_TB
tcg/i386: Store out-of-range call targets in constant pool
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 8 Sep 2017 10:02:54 +0000 (11:02 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-pa-
20170907' into staging
Conversion to TranslatorOps
# gpg: Signature made Thu 07 Sep 2017 19:42:48 BST
# gpg: using RSA key 0x64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-pa-
20170907:
target/hppa: Convert to TranslatorOps
target/hppa: Convert to DisasContextBase
target/hppa: Convert to DisasJumpType
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 8 Sep 2017 09:21:54 +0000 (10:21 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-axp-
20170907' into staging
Queued target/alpha patches
# gpg: Signature made Thu 07 Sep 2017 19:17:22 BST
# gpg: using RSA key 0x64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-axp-
20170907:
target/alpha: Switch to do_transaction_failed() hook
target/alpha: Convert to TranslatorOps
target/alpha: Convert to DisasContextBase
target/alpha: Convert to DisasJumpType
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wang Yong [Tue, 29 Aug 2017 07:22:39 +0000 (15:22 +0800)]
colo-compare: Update the COLO document to add the IOThread configuration
Update colo-proxy.txt,add IOThread configuration.
Later we have to configure IOThread,if not COLO can not work.
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wang Yong <wang.yong155@zte.com.cn>
Signed-off-by: Wang Guang <wang.guang55@zte.com.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Wang Yong [Tue, 29 Aug 2017 07:22:38 +0000 (15:22 +0800)]
colo-compare: Use IOThread to Check old packet regularly and Process pactkets of the primary
Remove the task which check old packet in the comparing thread,
then use IOthread context timer to handle it.
Process pactkets in the IOThread which arrived over the socket.
we use iothread_get_g_main_context to create a new g_main_loop in
the IOThread.then the packets from the primary and the secondary
are processed in the IOThread.
Finally remove the colo-compare thread using the IOThread instead.
Reviewed-by: Zhang Chen<zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wang Yong <wang.yong155@zte.com.cn>
Signed-off-by: Wang Guang <wang.guang55@zte.com.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Wang Yong [Tue, 29 Aug 2017 07:22:37 +0000 (15:22 +0800)]
qemu-iothread: IOThread supports the GMainContext event loop
IOThread uses AioContext event loop and does not run a GMainContext.
Therefore,chardev cannot work in IOThread,such as the chardev is
used for colo-compare packets reception.
This patch makes the IOThread run the GMainContext event loop,
chardev and IOThread can work together.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Wang Yong <wang.yong155@zte.com.cn>
Signed-off-by: Wang Guang <wang.guang55@zte.com.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Zhang Chen [Tue, 5 Sep 2017 06:31:06 +0000 (14:31 +0800)]
net/colo-compare.c: Fix comments and scheme
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Zhang Chen [Tue, 5 Sep 2017 06:31:05 +0000 (14:31 +0800)]
net/colo-compare.c: Adjust net queue pop order for performance
The packet_enqueue() use g_queue_push_tail() to
enqueue net packet, so it is more efficent way use
g_queue_pop_head() to get packet for compare.
That will improve the success rate of comparison.
In my test the performance of ftp put 1000M file
will increase 10%
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Zhang Chen [Tue, 5 Sep 2017 06:31:04 +0000 (14:31 +0800)]
net/colo-compare.c: Optimize unpredictable tcp options comparison
When network is busy, some tcp options(like sack) will unpredictable
occur in primary side or secondary side. it will make packet size
not same, but the two packet's payload is identical. colo just
care about packet payload, so we skip the option field.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Kamil Rytarowski [Sun, 3 Sep 2017 16:37:26 +0000 (18:37 +0200)]
e1000: Rename the SEC symbol to SEQEC
SunOS defines SEC in <sys/time.h> as 1 (commonly used time symbols).
This fixes build on SmartOS (Joyent).
Patch cherry-picked from pkgsrc by jperkin (Joyent).
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Mao Zhongyi [Mon, 4 Sep 2017 14:35:40 +0000 (22:35 +0800)]
net/socket: Improve -net socket error reporting
When -net socket fails, it first reports a specific error, then
a generic one, like this:
$ ./x86_64-softmmu/qemu-system-x86_64 -net socket,mcast=230.0.0.1:1234,listen
qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: exactly one of listen=, connect=, mcast= or udp= is required
qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: Device 'socket' could not be initialized
Convert net_socket_*_init() to Error to get rid of the superfluous second
error message. After the patch, the effect like this:
$ ./x86_64-softmmu/qemu-system-x86_64 -net socket,mcast=230.0.0.1:1234,listen
qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: exactly one of listen=, connect=, mcast= or udp= is requireda
This also fixes a few silent failures to report an error.
Cc: jasowang@redhat.com
Cc: armbru@redhat.com
Cc: berrange@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Mao Zhongyi [Mon, 4 Sep 2017 14:35:39 +0000 (22:35 +0800)]
net/net: Convert parse_host_port() to Error
Cc: berrange@redhat.com
Cc: kraxel@redhat.com
Cc: pbonzini@redhat.com
Cc: jasowang@redhat.com
Cc: armbru@redhat.com
Cc: eblake@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Mao Zhongyi [Mon, 4 Sep 2017 14:35:38 +0000 (22:35 +0800)]
net/socket: Convert several helper functions to Error
Currently, net_socket_mcast_create(), net_socket_fd_init_dgram() and
net_socket_fd_init() use the function such as fprintf(), perror() to
report an error message.
Now, convert these functions to Error.
Cc: jasowang@redhat.com
Cc: armbru@redhat.com
Cc: berrange@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Mao Zhongyi [Mon, 4 Sep 2017 14:35:37 +0000 (22:35 +0800)]
net/socket: Don't treat odd socket type as SOCK_STREAM
In net_socket_fd_init(), the 'default' case is odd: it warns,
then continues as if the socket type was SOCK_STREAM. The
comment explains "this could be a eg. a pty", but that makes
no sense. If @fd really was a pty, getsockopt() would fail
with ENOTSOCK. If @fd was a socket, but neither SOCK_DGRAM nor
SOCK_STREAM. It should not be treated as if it was SOCK_STREAM.
Turn this case into an Error. If there is a genuine reason to
support something like SOCK_RAW, it should be explicitly
handled.
Cc: jasowang@redhat.com
Cc: armbru@redhat.com
Cc: berrange@redhat.com
Cc: armbru@redhat.com
Cc: eblake@redhat.com
Suggested-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Zhang Chen [Wed, 23 Aug 2017 08:51:57 +0000 (16:51 +0800)]
MAINTAINERS: Update mail address for COLO Proxy
My Fujitsu mail account will be disabled soon, update the mail info
to my private mail.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Matt Parker [Tue, 15 Aug 2017 20:06:07 +0000 (21:06 +0100)]
net: rtl8139: do not use old_mmio accesses
Both io and memory use the same mmio functions in the rtl8139 device.
This patch removes the separate MemoryRegionOps and old_mmio accessors
for memory, and replaces it with an alias to the io memory region.
Signed-off-by: Matt Parker <mtparkr@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Mao Zhongyi [Mon, 14 Aug 2017 03:33:10 +0000 (11:33 +0800)]
net/rocker: Fix the unusual macro name
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Mao Zhongyi [Mon, 14 Aug 2017 03:33:09 +0000 (11:33 +0800)]
net/rocker: Convert to realize()
The rocker device still implements the old PCIDeviceClass .init()
instead of the new .realize(). All devices need to be converted to
.realize().
.init() reports errors with fprintf() and return 0 on success, negative
number on failure. Meanwhile, when -device rocker fails, it first report
a specific error, then a generic one, like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
rocker: name too long; please shorten to at most 9 chars
qemu-system-x86_64: -device rocker,name=qemu-rocker: Device initialization failed
Now, convert it to .realize() that passes errors to its callers via its
errp argument. Also avoid the superfluous second error message. After
the patch, effect like this:
$ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker
qemu-system-x86_64: -device rocker,name=qemu-rocker: name too long; please shorten to at most 9 chars
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Mao Zhongyi [Mon, 14 Aug 2017 03:33:08 +0000 (11:33 +0800)]
net/rocker: Plug memory leak in pci_rocker_init()
pci_rocker_init() leaks a World when the name more than 9 chars,
then return a negative value directly, doesn't make a correct
cleanup. So add a new goto label to fix it.
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Mao Zhongyi [Mon, 14 Aug 2017 03:33:07 +0000 (11:33 +0800)]
net/rocker: Remove the dead error handling
Memory allocation functions like world_alloc, desc_ring_alloc etc,
they are all wrappers around g_malloc, g_new etc. But g_malloc and
similar functions doesn't return null. Because they ignore the fact
that g_malloc() of 0 bytes returns null. So error checks for these
allocation failure are superfluous. Now, remove them entirely.
Cc: jasowang@redhat.com
Cc: jiri@resnulli.us
Cc: armbru@redhat.com
Cc: f4bug@amsat.org
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Zhang Chen [Fri, 28 Jul 2017 10:03:10 +0000 (18:03 +0800)]
net/filter-rewriter.c: Fix rewirter checksum bug when use virtio-net
Because vnet_hdr have a offset to net packet, we must add it when use
virtio-net.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sam Bobroff [Thu, 31 Aug 2017 06:38:46 +0000 (16:38 +1000)]
ppc: spapr: Move VCPU ID calculation into sPAPR
Move the calculation of a CPU's VCPU ID out of the generic PPC code
(ppc_cpu_realizefn()) and into sPAPR specific code
(spapr_cpu_core_realize()) where it belongs.
Unfortunately, due to the way things are ordered, we still need to
default the VCPU ID in ppc_cpu_realizfn() but at least doing that
doesn't require any interaction with sPAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Wed, 30 Aug 2017 13:24:35 +0000 (15:24 +0200)]
ppc: remove non implemented cpu models
Remove cpu models that aren't implemented and are not
compiled/tested since they are under TODO ifdef
which isn't defined in sources.
If someone really needs a removed model he/she should add
as regular one with corresponding implementation.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Wed, 30 Aug 2017 13:24:34 +0000 (15:24 +0200)]
ppc: drop caching ObjectClass from PowerPCCPUAlias
Caching there practically doesn't give any benefits
and that at slow path druring querying supported CPU list.
But it introduces non conventional path of where from
comes used CPU type name (kvm_ppc_register_host_cpu_type).
Taking in account that kvm_ppc_register_host_cpu_type()
fixes up models the aliases point to, it's sufficient to
make ppc_cpu_class_by_name() translate cpu alias to
correct cpu type name.
So drop PowerPCCPUAlias::oc field + ppc_cpu_class_by_alias()
and let ppc_cpu_class_by_name() do conversion to cpu type name,
which simplifies code a little bit saving ~20LOC and trouble
wondering why ppc_cpu_class_by_alias() is necessary.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Wed, 30 Aug 2017 13:24:33 +0000 (15:24 +0200)]
ppc: simplify cpu model lookup by PVR
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Wed, 30 Aug 2017 13:24:32 +0000 (15:24 +0200)]
ppc: replace inter-function cyclic dependency/recurssion with 2 simple lookups
previous patches cleaned up cpu model/alias naming which
allows to simplify cpu model/alias to cpu type lookup a bit
byt removing recurssion and dependency of ppc_cpu_class_by_name() /
ppc_cpu_class_by_alias() on each other.
Besides of simplifying code it reduces it by ~15LOC.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Wed, 30 Aug 2017 13:24:31 +0000 (15:24 +0200)]
ppc: make cpu alias point only to real cpu models
alias pointing to another alias forces lookup code to
do recurrsive translation till real cpu model is reached.
Drop this nonsence and make each alias point to cpu model
that has corresponding CPU type. It will allow to drop
recurrsion in cpu model translation code and actually
make ppc_cpu_aliases[] content use PowerPCCPUAlias
fields properly
(i.e. alias goes into .alias and model goes into .model)
While at it add TODO defines around aliases that point to
cpu models excluded by the same TODO defines.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Wed, 30 Aug 2017 13:24:30 +0000 (15:24 +0200)]
ppc: make cpu_model translation to type consistent
PPC handles -cpu FOO rather incosistently,
i.e. it does case-insensitive matching of FOO to
a CPU type (see: ppc_cpu_compare_class_name) but
handles alias names as case-sensitive, as result:
# qemu-system-ppc64 -M mac99 -cpu g3
qemu-system-ppc64: unable to find CPU model ' kN�U'
# qemu-system-ppc64 -cpu 970MP_V1.1
qemu-system-ppc64: Unable to find sPAPR CPU Core definition
while
# qemu-system-ppc64 -M mac99 -cpu G3
# qemu-system-ppc64 -cpu 970MP_v1.1
start up just fine.
Considering we can't take case-insensitive matching away,
make it case-insensitive for all alias/type/core_type
lookups.
As side effect it allows to remove duplicate core types
which are the same except of using different cased letters in name.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Igor Mammedov [Wed, 30 Aug 2017 13:24:29 +0000 (15:24 +0200)]
ppc: use macros to make cpu type name from string literal
Replace
"-" TYPE_POWERPC_CPU
when composing cpu type name from cpu model string literal
and the same pattern in format strings with
POWERPC_CPU_TYPE_SUFFIX and POWERPC_CPU_TYPE_NAME(model)
macroses like we do in x86.
Later POWERPC_CPU_TYPE_NAME() will be used to define default
cpu type per machine type and as bonus it will be consistent
and easy grep-able pattern across all other targets that I'm
plannig to treat the same way.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Thomas Huth [Fri, 1 Sep 2017 07:38:12 +0000 (09:38 +0200)]
target/ppc: Remove old STATUS file
The target/ppc/STATUS file has seen its last real update 10 years
ago - so the information in there is not up to date anymore. Since
nobody seems to care about this file, let's simply remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Sam Bobroff [Fri, 18 Aug 2017 05:50:22 +0000 (15:50 +1000)]
PPC: KVM: Support machine option to set VSMT mode
KVM now allows writing to KVM_CAP_PPC_SMT which has previously been
read only. Doing so causes KVM to act, for that VM, as if the host's
SMT mode was the given value. This is particularly important on Power
9 systems because their default value is 1, but they are able to
support values up to 8.
This patch introduces a way to control this capability via a new
machine property called VSMT ("Virtual SMT"). If the value is not set
on the command line a default is chosen that is, when possible,
compatible with legacy systems.
Note that the intialization of KVM_CAP_PPC_SMT has changed slightly
because it has changed (in KVM) from a global capability to a
VM-specific one. This won't cause a problem on older KVMs because VM
capabilities fall back to global ones.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Thu, 17 Aug 2017 11:23:50 +0000 (13:23 +0200)]
spapr: fallback to raw mode if best compat mode cannot be set during CAS
KVM PR doesn't allow to set a compat mode. This causes ppc_set_compat_all()
to fail and we return H_HARDWARE to the guest right away.
This is excessive: even if we favor compat mode since commit
152ef803ceb19,
we should at least fallback to raw mode if the guest supports it.
This patch modifies cas_check_pvr() so that it also reports that the real
PVR was found in the table supplied by the guest. Note that this is only
makes sense if raw mode isn't explicitely disabled (ie, the user didn't
set the machine "max-cpu-compat" property). If this is the case, we can
simply ignore ppc_set_compat_all() failures, and let the guest run in raw
mode.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Thomas Huth [Thu, 24 Aug 2017 07:41:33 +0000 (09:41 +0200)]
hw/nvram/spapr_nvram: Device can not be created by the users
Trying to add a spapr-nvram device currently aborts QEMU like this:
$ ppc64-softmmu/qemu-system-ppc64 -device spapr-nvram
qemu-system-ppc64: hw/ppc/spapr_rtas.c:407: spapr_rtas_register:
Assertion `!rtas_table[token].name' failed.
Aborted (core dumped)
This NVRAM device registers RTAS calls during its realize function
and thus can only be used once - and that's internally from spapr.c.
So let's mark the device with user_creatable = false to avoid that
the users can crash their QEMU this way.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Thomas Huth [Thu, 24 Aug 2017 03:52:32 +0000 (05:52 +0200)]
hw/ppc/spapr_cpu_core: Add a proper check for spapr machine
QEMU currently crashes when the user tries to add a spapr-cpu-core
on a non-pseries machine:
$ qemu-system-ppc64 -S -machine ppce500,accel=tcg \
-device POWER5+_v2.1-spapr-cpu-core
hw/ppc/spapr_cpu_core.c:178:spapr_cpu_core_realize_child:
Object 0x55cee1f55160 is not an instance of type spapr-machine
Aborted (core dumped)
So let's add a proper check for the correct machine time with
a more friendly error message here.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
BALATON Zoltan [Sun, 20 Aug 2017 17:23:05 +0000 (19:23 +0200)]
ppc4xx: Export ECB and PLB emulation
Make these device models available outside ppc405_uc.c for reuse in
460EX emulation. They are left in their current place for now because
they are used mostly unchanged and I'm not sure these correctly model
the components in 440 SoCs (but they seem to be good enough). These
functions could be moved in a subsequent clean up series when this is
confirmed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
BALATON Zoltan [Sun, 20 Aug 2017 17:23:05 +0000 (19:23 +0200)]
ppc4xx_i2c: Move to hw/i2c
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
BALATON Zoltan [Sun, 20 Aug 2017 17:23:05 +0000 (19:23 +0200)]
ppc4xx_i2c: QOMify
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
BALATON Zoltan [Sun, 20 Aug 2017 17:23:05 +0000 (19:23 +0200)]
ppc4xx: Split off 4xx I2C emulation from ppc405_uc to its own file
This device appears in other SoCs as well not just in 405 ones and
subsequent patches will modify it, so move it out of ppc405_uc.c in
preparation
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
BALATON Zoltan [Sun, 20 Aug 2017 17:23:05 +0000 (19:23 +0200)]
ppc4xx: Make MAL emulation more generic
Allow MAL with more RX and TX channels as found in newer versions.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
BALATON Zoltan [Sun, 20 Aug 2017 17:23:05 +0000 (19:23 +0200)]
ppc4xx: Move MAL from ppc405_uc to ppc4xx_devs
This device appears in other SoCs as well not just in 405 ones
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Alexey Kardashevskiy [Thu, 20 Jul 2017 07:22:29 +0000 (17:22 +1000)]
spapr_iommu: Realloc guest visible TCE table when hot(un)plugging vfio-pci
This replaces g_malloc() with spapr_tce_alloc_table() as this is
the standard way of allocating tables and this allows moving the table
back to KVM when unplugging a VFIO PCI device and VFIO TCE acceleration
support is not present in the KVM.
Although spapr_tce_alloc_table() is expected to fail with EBUSY
if called when previous fd is not closed yet, in practice we will not
see it because cap_spapr_vfio is false at the moment.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KONRAD Frederic [Mon, 7 Aug 2017 15:50:48 +0000 (17:50 +0200)]
ppc64: introduce e6500
This introduces e6500 core.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KONRAD Frederic [Mon, 7 Aug 2017 15:50:47 +0000 (17:50 +0200)]
booke206: allow to specify an mmucfg value at the init
This allows to init the MMUCFG SPR with a non NULL value.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KONRAD Frederic [Mon, 7 Aug 2017 15:50:46 +0000 (17:50 +0200)]
booke206: fix tlbnps for fixed size TLB
Some OS don't populate the TSIZE field when using a fixed size TLB which result
in a 1KB TLB. When the TLB is a fixed size TLB the TSIZE field should be
ignored.
Fix this wrong behavior with MAV 2.0.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KONRAD Frederic [Mon, 7 Aug 2017 15:50:45 +0000 (17:50 +0200)]
booke206: fix booke206_tlbnps for mav 2.0
This fixes booke206_tlbnps for MAV 2.0 by checking the MMUCFG register and
return directly the right tlbnps instead of computing it from non existing
field.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Sam Bobroff [Wed, 9 Aug 2017 05:38:56 +0000 (15:38 +1000)]
ppc: spapr: Make VCPU ID handling private to SPAPR
The concept of a VCPU ID that differs from the CPU's index
(cpu->cpu_index) exists only within SPAPR machines so, move the
functions ppc_get_vcpu_id() and ppc_get_cpu_by_vcpu_id() into spapr.c
and rename them appropriately.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Sam Bobroff [Thu, 3 Aug 2017 06:28:44 +0000 (16:28 +1000)]
ppc: spapr: Rename cpu_dt_id to vcpu_id
This field actually records the VCPU ID used by KVM and, although the
value is also used in the device tree it is primarily the VCPU ID so
rename it as such.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Updated comment missed in cpu.h]
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Sam Bobroff [Thu, 3 Aug 2017 06:28:36 +0000 (16:28 +1000)]
e500: Use cpu_index instead of vcpu_dt_id
The e500 platform code uses the function ppc_get_vcpu_dt_id() to get
an id to put in its device tree. Which seems like it makes sense, but
ppc_get_vcpu_dt_id() is actually badly named - it only differs from
cpu_index in cases where you're running on KVM HV and the host's
number of threads differs from the guests. Since KVM HV only supports
PAPR, not e500, it doesn't make sense to use it here.
Simply use the cpu_index instead (which is 'i' in this context
because qemu_get_cpu(i) returns the cpu with cpu_index == i).
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
[dwg: Rewrote commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Tue, 25 Jul 2017 18:01:12 +0000 (20:01 +0200)]
spapr: add pseries-2.11 machine type
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Tue, 25 Jul 2017 18:00:22 +0000 (20:00 +0200)]
spapr_iommu: unregister vmstate at unrealize time
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Michael Roth [Tue, 25 Jul 2017 18:00:09 +0000 (20:00 +0200)]
spapr_iommu: pass object ownership to parent/owner
TCE table objects attach themselves to an owner as a child
property. unref afterward to allow them to be finalized
when their owner is finalized.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Michael Roth [Tue, 25 Jul 2017 17:59:56 +0000 (19:59 +0200)]
spapr_drc: pass object ownership to parent/owner
DRC objects attach themselves to an owner as a child
property. unref afterward to allow them to be finalized
when their owner is finalized.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Tue, 25 Jul 2017 17:59:44 +0000 (19:59 +0200)]
spapr_drc: add unrealize method to physical DRC class
When hot-unplugging a PHB, all its PCI DRC connectors get unrealized. This
patch adds an unrealize method to the physical DRC class, in order to undo
registrations performed in realize_physical().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>