OSDN Git Service
Simon 'corecode' Schubert [Sun, 18 Feb 2007 17:17:08 +0000 (18:17 +0100)]
Allow passing of an alternative CVSROOT via -d.
This is necessary if using CVS in an asymmetric fashion, i.e. when the
CVSROOT you are checking out from differs from the CVSROOT you have to
commit to.
Signed-off-by: Simon 'corecode' Schubert <corecode@fs.ei.tum.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alex Riesen [Tue, 20 Feb 2007 09:04:32 +0000 (10:04 +0100)]
disable t4016-diff-quote.sh on some filesystems
... because the filesystems (most typically FAT and NTFS) do not support
HT nor LF in filenames.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Martin Waitz [Sat, 17 Feb 2007 09:13:10 +0000 (10:13 +0100)]
Support for large files on 32bit systems.
Glibc uses the same size for int and off_t by default.
In order to support large pack sizes (>2GB) we force Glibc to a 64bit off_t.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Mon, 19 Feb 2007 14:56:04 +0000 (15:56 +0100)]
git grep: use pager
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 21 Feb 2007 06:28:22 +0000 (22:28 -0800)]
Merge branch 'fk/autoconf'
* fk/autoconf:
New autoconf test for iconv
Junio C Hamano [Wed, 21 Feb 2007 06:24:03 +0000 (22:24 -0800)]
Merge branch 'js/name-rev-fix'
* js/name-rev-fix:
name-rev: avoid "^0" when unneeded
Junio C Hamano [Tue, 20 Feb 2007 09:55:07 +0000 (01:55 -0800)]
prefixcmp(): fix-up leftover strncmp().
There were instances of strncmp() that were formatted improperly
(e.g. whitespace around parameter before closing parenthesis)
that caused the earlier mechanical conversion step to miss
them. This step cleans them up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 20 Feb 2007 09:54:00 +0000 (01:54 -0800)]
prefixcmp(): fix-up mechanical conversion.
Previous step converted use of strncmp() with literal string
mechanically even when the result is only used as a boolean:
if (!strncmp("foo", arg, 3)) ==> if (!(-prefixcmp(arg, "foo")))
This step manually cleans them up to read:
if (!prefixcmp(arg, "foo"))
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 20 Feb 2007 09:53:29 +0000 (01:53 -0800)]
Mechanical conversion to use prefixcmp()
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 20 Feb 2007 09:51:22 +0000 (01:51 -0800)]
Add prefixcmp()
We have too many strncmp(a, b, strlen(b)).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 21 Feb 2007 06:02:15 +0000 (22:02 -0800)]
Merge branch 'maint'
* maint:
Check for PRIuMAX rather than NO_C99_FORMAT in fast-import.c.
Jason Riedy [Wed, 21 Feb 2007 01:34:56 +0000 (17:34 -0800)]
Check for PRIuMAX rather than NO_C99_FORMAT in fast-import.c.
Thanks to Simon 'corecode' Schubert <corecode@fs.ei.tum.de> for
the clean-up. Defining the C99 standard PRIuMAX when necessary
replaces UM_FMT and the awkward UM10_FMT. There are no direct
C99 translations for other uses of NO_C99_FORMAT in git, alas.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 20 Feb 2007 08:44:35 +0000 (00:44 -0800)]
Link 1.5.0.1 documentation from the main page.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Tue, 20 Feb 2007 00:08:48 +0000 (01:08 +0100)]
name-rev: avoid "^0" when unneeded
When naming by a tag, we used to add "^0" even if this was not really
necessary. For example, `git name-rev
de6f0def` now outputs
de6f0def tags/v1.5.0.1~9
instead of
de6f0def tags/v1.5.0.1^0~9
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Theodore Ts'o [Mon, 19 Feb 2007 04:00:00 +0000 (23:00 -0500)]
Teach git-remote to update existing remotes by fetching from them
This allows users to use the command "git remote update" to update all
remotes that are being tracked in the repository.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 20 Feb 2007 02:30:59 +0000 (18:30 -0800)]
Merge branch 'js/diff-color-check'
* js/diff-color-check:
diff --check: use colour
Junio C Hamano [Tue, 20 Feb 2007 02:30:52 +0000 (18:30 -0800)]
Merge branch 'jc/fetch-notags'
* jc/fetch-notags:
remotes.not-origin.tagopt
Junio C Hamano [Tue, 20 Feb 2007 02:29:41 +0000 (18:29 -0800)]
Merge branch 'maint'
* maint:
Obey NO_C99_FORMAT in fast-import.c.
Add a compat/strtoumax.c for Solaris 8.
git-clone: Sync documentation to usage note.
Jason Riedy [Tue, 20 Feb 2007 00:27:09 +0000 (16:27 -0800)]
Obey NO_C99_FORMAT in fast-import.c.
Define UM_FMT and UM10_FMT and use in place of %ju and %10ju,
respectively. Both format as unsigned long long, so this
assumes the compiler supports long long.
Signed-off-by: Jason Riedy <jason@acm.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jason Riedy [Tue, 20 Feb 2007 00:22:56 +0000 (16:22 -0800)]
Add a compat/strtoumax.c for Solaris 8.
Solaris 8 was pre-c99, and they weren't willing to commit to
the strtoumax definition according to /usr/include/inttypes.h.
This adds NO_STRTOUMAX and NO_STRTOULL for ancient systems.
If NO_STRTOUMAX is defined, the routine in compat/strtoumax.c
will be used instead. That routine passes its arguments to
strtoull unless NO_STRTOULL is defined. If NO_STRTOULL, then
the routine uses strtoul (unsigned long).
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Acked-by: Shawn O Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Christian Schlotter [Mon, 19 Feb 2007 12:35:35 +0000 (13:35 +0100)]
git-clone: Sync documentation to usage note.
Documentation advertises the new `--depth <n>' parameter with an equal
sign, while the usage notes (shown after `git-clone --help') do not. If I
understood git-clone's source code correctly, the version without the
equal sign is correct, which is why this patch syncs documentation to the
usage note.
Signed-off-by: Christian Schlotter <schlotter@users.sourceforge.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 19 Feb 2007 21:11:05 +0000 (13:11 -0800)]
Merge branch 'ap/cvsserver'
* ap/cvsserver:
Have git-cvsserver call hooks/update before really altering the ref
Acked-by: Martin Langhoff <martin@catalyst.net.nz>
Junio C Hamano [Mon, 19 Feb 2007 02:45:52 +0000 (18:45 -0800)]
Merge branch 'maint'
* maint:
GIT 1.5.0.1
Documentation/i18n.txt: it is i18n.commitencoding not core.commitencoding
Read the config in rev-list
Conflicts:
RelNotes
Junio C Hamano [Mon, 19 Feb 2007 00:18:43 +0000 (16:18 -0800)]
GIT 1.5.0.1
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fredrik Kuivinen [Sun, 18 Feb 2007 09:36:51 +0000 (10:36 +0100)]
Documentation/i18n.txt: it is i18n.commitencoding not core.commitencoding
Similarly for i18n.logoutputencoding.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fredrik Kuivinen [Sun, 18 Feb 2007 09:36:22 +0000 (10:36 +0100)]
Read the config in rev-list
Otherwise "git rev-list --header HEAD" will not do the right
thing if i18n.commitencoding is set.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fredrik Kuivinen [Sun, 18 Feb 2007 08:44:42 +0000 (09:44 +0100)]
New autoconf test for iconv
On a Solaris machine I have access to libc contains the symbol
"iconv" but, when compiling with gcc and including iconv.h we get
iconv.h from GNU libiconv. This header file define (among other
things) "iconv" to "libiconv" and so on.
In order to link with GNU libiconv we need -liconv. Currently we
test if the symbol "iconv" is in libc (which is true), then we get
a undefined reference error because we don't have libiconv_open.
The solution this patch implements is to compile and link a
small test program, instead of just checking if the libraries
(libc and libiconv) contains the symbol "iconv".
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Sun, 18 Feb 2007 16:27:24 +0000 (17:27 +0100)]
diff --check: use colour
Reuse the colour handling of the regular diff.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 17 Feb 2007 23:50:36 +0000 (15:50 -0800)]
Update draft release notes for 1.5.1
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 18 Feb 2007 00:16:48 +0000 (16:16 -0800)]
Merge branch 'maint'
* maint:
Update draft release notes for 1.5.0.1
Convert update-index references in docs to add.
Attempt to improve git-rebase lead-in description.
Do not take mode bits from index after type change.
git-blame: prevent argument parsing segfault
Make gitk save and restore window pane position on Linux and Cygwin.
Make gitk save and restore the user set window position.
[PATCH] gitk: Use show-ref instead of ls-remote
[PATCH] Make gitk work reasonably well on Cygwin.
[PATCH] gitk - remove trailing whitespace from a few lines.
Change git repo-config to git config
Junio C Hamano [Sat, 17 Feb 2007 23:47:46 +0000 (15:47 -0800)]
Update draft release notes for 1.5.0.1
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 18 Feb 2007 00:13:08 +0000 (16:13 -0800)]
Merge git://git./pub/scm/gitk/gitk into maint
* git://git.kernel.org/pub/scm/gitk/gitk:
Make gitk save and restore window pane position on Linux and Cygwin.
Make gitk save and restore the user set window position.
[PATCH] gitk: Use show-ref instead of ls-remote
[PATCH] Make gitk work reasonably well on Cygwin.
[PATCH] gitk - remove trailing whitespace from a few lines.
Change git repo-config to git config
Johannes Schindelin [Sat, 17 Feb 2007 18:22:35 +0000 (19:22 +0100)]
name-rev: introduce the --refs=<pattern> option
Instead of (or, in addition to) --tags, to use only tags for naming,
you can now use --refs=<pattern> to specify a shell glob pattern
which the refs must match to be used for naming.
Example:
$ git name-rev --refs=*v1*
33db5f4d
33db5f4d tags/v1.0rc1^0~1593
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Sat, 17 Feb 2007 09:43:42 +0000 (04:43 -0500)]
Convert update-index references in docs to add.
Since `git add` is the approved porcelain for an end-user to invoke
when they want to manipulate the index, porcelain documentation
should steer the user to this command rather than the pure plumbing
update-index.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Sat, 17 Feb 2007 09:31:50 +0000 (04:31 -0500)]
Attempt to improve git-rebase lead-in description.
It was mentioned on #git this morning that the lead-in description
of git-rebase is very confusing. Too many branch this and branch
that in a very short run of text.
This new description attempts to walk the user through the command
syntax, while also describing exactly what git-rebase is doing to
their repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 17 Feb 2007 06:43:48 +0000 (22:43 -0800)]
Do not take mode bits from index after type change.
When we do not trust executable bit from lstat(2), we copied
existing ce_mode bits without checking if the filesystem object
is a regular file (which is the only thing we apply the "trust
executable bit" business) nor if the blob in the index is a
regular file (otherwise, we should do the same as registering a
new regular file, which is to default non-executable).
Noticed by Johannes Sixt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Tommi Kyntola [Fri, 16 Feb 2007 08:50:58 +0000 (10:50 +0200)]
git-blame: prevent argument parsing segfault
The 3rd branch in builtin-blame.c should also check for lacking
arguments. Running that in top dir does not trigger the problem
because the 'prefix' is NULL.
Signed-off-by: Tommi Kyntola <tommi.kyntola@ray.fi>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 16 Feb 2007 23:08:46 +0000 (15:08 -0800)]
Merge branch 'maint'
* maint:
git-merge: minor fix for no_trivial_merge_strategies.
Junio C Hamano [Fri, 16 Feb 2007 23:08:25 +0000 (15:08 -0800)]
git-merge: minor fix for no_trivial_merge_strategies.
The shell loop to determine if we should skip the trivial
in-index merge stage based on what strategy is given was not
prepared to have more than one strategy listed in the variable
$no_trivial_merge_strategies.
This does not trigger unless you use a modified git but the fix
is simple and straightforward, so let's fix it before 1.5.0.1.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 16 Feb 2007 01:13:15 +0000 (17:13 -0800)]
Merge branch 'maint'
* maint:
pretend-sha1: grave bugfix.
Junio C Hamano [Fri, 16 Feb 2007 01:02:06 +0000 (17:02 -0800)]
pretend-sha1: grave bugfix.
We stashed away objects that we pretend to have, but did not save the
actual data.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 15 Feb 2007 09:46:27 +0000 (01:46 -0800)]
remotes.not-origin.tagopt
With a configuration entry like this:
[remote "alt-git"]
url = git://repo.or.cz/alt.git/git/
fetch = +refs/heads/*:refs/remotes/alt-git/*
tagopt = --no-tags
you do not have to say "git pull --no-tags alt-git". Just
saying "git pull alt-git" would suffice.
Obviously, if you want to get the tag from such an alternate
remote in a separate namespace, you could also do something like:
[remote "alt-git"]
url = git://repo.or.cz/alt.git/git/
fetch = +refs/heads/*:refs/remotes/alt-git/*
fetch = +refs/tags/*:refs/remote-tags/alt-git/*
tagopt = --no-tags
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 23:25:53 +0000 (15:25 -0800)]
Merge branch 'maint'
* maint:
GIT-VERSION-FILE: check ./version first.
sha1_file.c: Round the mmap offset to half the window size.
Make sure packedgitwindowsize is multiple of (pagesize * 2)
Add RelNotes 1.5.0.1
Still updating 1.5.0 release notes.
git-daemon: Avoid leaking the listening sockets into child processes.
Clarify two backward incompatible repository options.
Junio C Hamano [Wed, 14 Feb 2007 19:33:04 +0000 (11:33 -0800)]
GIT-VERSION-FILE: check ./version first.
When somebody else extracts git tarball inside a larger project,
'git describe' would reported the version number of that upper
level project.
Sometimes, using the consistent versioning across subdirectories
of a larger project is useful, but it may not always be the
right thing to do.
This changes the script to check ./vertion file first, and then
fall back to "git describe". This way, by default, tarball
distribution will get our own version. If the upper level wants
to use consistent versioning across its subdirectories, its
Makefile can overwrite ./version file to force whatever version
number they want to give us before descending into us.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alexandre Julliard [Wed, 14 Feb 2007 17:11:40 +0000 (18:11 +0100)]
sha1_file.c: Round the mmap offset to half the window size.
This ensures that a given area is mapped at most twice, and greatly
reduces the virtual address space usage.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mark Levedahl [Tue, 13 Feb 2007 00:19:34 +0000 (19:19 -0500)]
Make gitk save and restore window pane position on Linux and Cygwin.
Subtle bugs remained on both Cygwin and Linux that caused the various
window panes to be restored in positions different than where the user
last placed them. Sergey Vlasov posed a pair of suggested fixes to this,
what is done here is slightly different. The basic fix here involves
a) explicitly remembering and restoring the sash positions for the upper
window, and b) using paneconfigure to redundantly set height and width of
other elements. This redundancy is needed as Cygwin Tcl has a nasty habit
of setting pane sizes to zero if their slaves are not configured with a
specific size, but Linux Tcl does not honor the specific size given.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mark Levedahl [Fri, 9 Feb 2007 03:22:24 +0000 (22:22 -0500)]
Make gitk save and restore the user set window position.
gitk was saving widget sizes and positions when the main window was
destroyed, which is after all child widgets are destroyed. The cure
is to trap the WM_DELETE_WINDOW event before the gui is torn down. Also,
the saved geometry was captured using "winfo geometry .", rather than
"wm geometry ." Under Linux, these two return different answers and the
latter one is correct.
[jc: credit goes to Brett Schwarz for suggesting the use of "wm protocol";
I also squashed the follow-up patch to remove extraneous -0
from expressions.]
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 30 Jan 2007 05:53:28 +0000 (21:53 -0800)]
[PATCH] gitk: Use show-ref instead of ls-remote
It used to be ls-remote on self was the only easy way to grab
the ref information. Now we have show-ref which does not
involve fork and IPC, so use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Junio C Hamano [Thu, 1 Feb 2007 13:46:38 +0000 (08:46 -0500)]
[PATCH] Make gitk work reasonably well on Cygwin.
The gitk gui layout was completely broken on Cygwin. If gitk was started
without previous geometry in ~/.gitk, the user could drag the window sashes
to get a useable layout. However, if ~/.gitk existed, this was not possible
at all.
The fix was to rewrite makewindow, changing the toplevel containers and
the particular geometry information saved between sessions. Numerous bugs
in both the Cygwin and the Linux Tk versions make this a delicate
balancing act: the version here works in both but many subtle variants
are competely broken in one or the other environment.
Three user visible changes result:
1 - The viewer is fully functional under Cygwin.
2 - The search bar moves from the bottom to the top of the lower left
pane. This was necessary to get around a layout problem on Cygwin.
3 - The window size and position is saved and restored between sessions.
Again, this is necessary to get around a layout problem on Cygwin.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Mark Levedahl [Thu, 1 Feb 2007 13:44:46 +0000 (08:44 -0500)]
[PATCH] gitk - remove trailing whitespace from a few lines.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Wed, 14 Feb 2007 21:54:34 +0000 (08:54 +1100)]
Change git repo-config to git config
This is the gitk part of
e0d10e1c63bc52b37bbec99b07deee794058d9b4
from Tom Prince.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Junio C Hamano [Wed, 14 Feb 2007 21:20:41 +0000 (13:20 -0800)]
Make sure packedgitwindowsize is multiple of (pagesize * 2)
The next patch depends on this.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 19:01:41 +0000 (11:01 -0800)]
Add RelNotes 1.5.0.1
In the same spirit as commit
6fc66686, let's keep notes as we fix
things.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 18:54:25 +0000 (10:54 -0800)]
Still updating 1.5.0 release notes.
In cruft removal section we had a cruft we needed to remove.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alexandre Julliard [Wed, 14 Feb 2007 17:10:26 +0000 (18:10 +0100)]
git-daemon: Avoid leaking the listening sockets into child processes.
This makes it possible to restart git-daemon even if some children are
still running.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Wed, 14 Feb 2007 11:20:32 +0000 (11:20 +0000)]
The "table-of-contents" in the update hook script should match the body
44478d99ee0 introduced a filter using "git-rev-parse --not --all" to the
log display to prevent the display of revisions already in the
repository. However, the table of contents generation didn't get that
same update.
This patch fixes that. The table of contents before the log and the log
now both display the same list of revisions.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Tue, 13 Feb 2007 15:12:45 +0000 (15:12 +0000)]
Have git-cvsserver call hooks/update before really altering the ref
git-cvsserver is analogous to git-receive-pack; a checking from a cvs
client to a central server is like a git-push from a working repository.
Therefore it's nice to use the same access control (and email sending)
that a receive-pack would perform.
This patch tests for an executable update hook; if it is it is run with
the ref being updated and the old and new hashes as normal. If the
update hook returns an error code the update is aborted and the ref is
never updated. The cvsserver returns "error 1" to the client to signal
there was an EPERM error.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 09:50:28 +0000 (01:50 -0800)]
Clarify two backward incompatible repository options.
It was unclear if the backward compatible features were disabled
or the configuration variables that controls them were set to
false by default from the description. Obviously we meant the
former, but the problem was made worse by the fact that one
configuration variable breaks compatibility when set to true and
the other one breaks it when set to false.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 08:49:06 +0000 (00:49 -0800)]
Point top-level RelNotes link at 1.5.1 release notes being prepared.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 08:45:24 +0000 (00:45 -0800)]
Add RelNotes 1.5.1
Instead of running around listing the changes near the release,
let's keep things nicely organized by summarizing the changes as
we merge things to the 'master' branch.
I haven't decided how well this will go with people's patch
submission procedure yet --- we'll play it by the ear and see
what happens.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 08:41:32 +0000 (00:41 -0800)]
Document --ignore-space-at-eol option.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 06:48:32 +0000 (22:48 -0800)]
Merge branch 'maint'
* maint:
Makefile: update check-docs target
cmd-list: add git-remote
Documentation: Drop full-stop from git-fast-import title.
Minor corrections to release notes
Junio C Hamano [Wed, 14 Feb 2007 06:45:22 +0000 (22:45 -0800)]
Makefile: update check-docs target
Old aliases are not linked to the main command list. Also the internal
git-add--interactive does not need to be on the list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 06:42:51 +0000 (22:42 -0800)]
cmd-list: add git-remote
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 06:32:36 +0000 (22:32 -0800)]
Documentation: Drop full-stop from git-fast-import title.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Wed, 14 Feb 2007 00:30:29 +0000 (01:30 +0100)]
teach diff machinery about --ignore-space-at-eol
`git diff --ignore-space-at-eol` will ignore whitespace at the
line ends.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Tue, 13 Feb 2007 14:24:06 +0000 (14:24 +0000)]
Only show log entries for new revisions in hooks--update
If you were issuing emails for two branches, and one merged the other,
you would get the same log messages appearing in two separate emails.
e.g. A working repository, where the last push to central was done at
the revision marked "B", after which two branches were developed
further.
* -- B -- 1 -- 1 -- M (branch1)
\ /
2 -- 2 -- 2 (branch2)
Now imagine that branch2 is pushed to the email-generating repository;
an email containing all the "2" revisions would be sent. Now, let's say
branch1 is pushed, the old update hook would run
git-rev-list $newrev ^$baserev
Where $newrev would be "M" and $baserev would be "B". This list
includes all the "2" revisions as well as all the "1" revisions.
This patch addresses this problem by using
git-rev-parse --not --all | git-rev-list --stdin $newrev ^$baserev
To inhibit the display of all revisions that are already in the
repository.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nicolas Pitre [Wed, 14 Feb 2007 03:25:08 +0000 (22:25 -0500)]
Minor corrections to release notes
Update section about warning when leaving a detached head.
Also fix a few indentations that weren't like the rest of the file.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 5 Nov 2006 19:52:43 +0000 (11:52 -0800)]
blame: --show-stats for easier optimization work.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 03:20:06 +0000 (19:20 -0800)]
Merge branch 'js/reverse'
* js/reverse:
Teach revision machinery about --reverse
Junio C Hamano [Wed, 14 Feb 2007 03:18:16 +0000 (19:18 -0800)]
Merge branch 'jc/diff-apply-patch'
* jc/diff-apply-patch:
git-diff/git-apply: make diff output a bit friendlier to GNU patch (part 2)
Junio C Hamano [Wed, 14 Feb 2007 00:50:32 +0000 (16:50 -0800)]
Merge branch 'jc/merge-base' (early part)
This contains an evil merge to fast-import, in order to
resolve in_merge_bases() update.
Junio C Hamano [Wed, 14 Feb 2007 00:44:27 +0000 (16:44 -0800)]
Merge branch 'jc/deprecate'
As previously announced, diff-stages and resolve are now gone.
Junio C Hamano [Wed, 14 Feb 2007 00:43:24 +0000 (16:43 -0800)]
Add link to v1.5.0 documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 14 Feb 2007 00:00:00 +0000 (00:00 +0000)]
GIT 1.5.0
Junio C Hamano [Tue, 13 Feb 2007 23:15:05 +0000 (15:15 -0800)]
Add release notes to the distribution.
This also adds a hook in the Makefile I can use to automatically
include pointers to documentation for older releases when updating
the pages at http://kernel.org/pub/software/scm/git/docs/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 13 Feb 2007 21:48:52 +0000 (13:48 -0800)]
Merge branch 'master' of git://repo.or.cz/git-gui
* 'master' of git://repo.or.cz/git-gui:
git-gui: fix typo in GIT-VERSION-GEN, "/dev/null" not "/devnull"
Junio C Hamano [Tue, 13 Feb 2007 16:58:01 +0000 (08:58 -0800)]
Documentation: Moving out of detached HEAD does not warn anymore.
The documentation still talked about the unnecessary 'safety'
in git-checkout.
Pointed out by Matthias Lederhofer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds [Tue, 13 Feb 2007 17:23:59 +0000 (09:23 -0800)]
Mark places that need blob munging later for CRLF conversion.
Here's a patch that I think we can merge right now. There may be
other places that need this, but this at least points out the
three places that read/write working tree files for git
update-index, checkout and diff respectively. That should cover
a lot of it [jc: git-apply uses an entirely different codepath
both for reading and writing].
Some day we can actually implement it. In the meantime, this
points out a place for people to start. We *can* even start with
a really simple "we do CRLF conversion automatically, regardless
of filename" kind of approach, that just look at the data (all
three cases have the _full_ file data already in memory) and
says "ok, this is text, so let's convert to/from DOS format
directly".
THAT somebody can write in ten minutes, and it would already
make git much nicer on a DOS/Windows platform, I suspect.
And it would be totally zero-cost if you just make it a config
option (but please make it dynamic with the _default_ just being
0/1 depending on whether it's UNIX/Windows, just so that UNIX
people can _test_ it easily).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nicolas Pitre [Tue, 13 Feb 2007 16:39:01 +0000 (11:39 -0500)]
Update RPM core package description
Git isn't as stupid as it used to be
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Tue, 13 Feb 2007 14:23:58 +0000 (14:23 +0000)]
Fix potential command line overflow in hooks--update
In a repository with a large number of refs, the following command line
could easily overflow the command line size limitations
git-rev-list $newref $(git-rev-parse --not --all)
Fortunately, git-rev-list already has the means to cope with this
situation with the --stdin switch
git-rev-parse --not --all | git-rev-list --stdin $newref
Which is exactly what this patch does.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Schindelin [Tue, 13 Feb 2007 13:01:42 +0000 (14:01 +0100)]
git-gc: run pack-refs by default unless the repo is bare
The config variable gc.packrefs is tristate now: "true", "false"
and "notbare", where "notbare" is the default.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Tue, 13 Feb 2007 15:26:16 +0000 (15:26 +0000)]
git-gui: fix typo in GIT-VERSION-GEN, "/dev/null" not "/devnull"
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano [Sun, 11 Feb 2007 21:41:23 +0000 (13:41 -0800)]
"git-fetch --tags $URL" should not overwrite existing tags
Use the same --exclude-existing filter as we use for automatic
tag following to avoid overwriting existing tags with replacement
ones the other side created.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 13 Feb 2007 07:21:34 +0000 (23:21 -0800)]
for-each-reflog: not having $GIT_DIR/logs directory is not an error.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 13 Feb 2007 07:06:54 +0000 (23:06 -0800)]
Do not forget to pack objects reachable from HEAD reflog.
Similar to commit
eb8381c8, we need to use for_each_reflog() to make
sure we do not miss objects reachable from HEAD reflog.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Michael Spang [Tue, 13 Feb 2007 00:33:37 +0000 (19:33 -0500)]
Work around Subversion race in git-svn tests.
Some of the git-svn tests can fail on fast machines due to a race in
Subversion: if a file is modified in the same second it was checked out
(or in for that matter), Subversion will not consider it modified. This
works around the problem by increasing the timestamp by one second
before each commit.
[jc: with "touch -r -d" replacement from Eric]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Pavel Roskin [Tue, 13 Feb 2007 05:43:44 +0000 (00:43 -0500)]
Clarify that git-update-server-info should be run for every git-push
The old text suggested that git-update-server-info only needs to be run
if new tags or branches are created, but not for new commits.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 8 Feb 2007 01:03:46 +0000 (17:03 -0800)]
Remove git-diff-stages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 7 Feb 2007 18:37:03 +0000 (10:37 -0800)]
Remove git-resolve.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Aneesh Kumar K.V [Mon, 12 Feb 2007 17:30:28 +0000 (23:00 +0530)]
blameview: Move the commit info to a pane below the blame window.
Also spawn the the new blameview in the background
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Matthias Lederhofer [Mon, 5 Feb 2007 11:37:27 +0000 (12:37 +0100)]
git merge documentation: -m is optional
Changed -m=<msg> to -m <msg> too.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mark Levedahl [Tue, 13 Feb 2007 00:19:34 +0000 (19:19 -0500)]
Make gitk save and restore window pane position on Linux and Cygwin.
Subtle bugs remained on both Cygwin and Linux that caused the various
window panes to be restored in positions different than where the user
last placed them. Sergey Vlasov posed a pair of suggested fixes to this,
what is done here is slightly different. The basic fix here involves
a) explicitly remembering and restoring the sash positions for the upper
window, and b) using paneconfigure to redundantly set height and width of
other elements. This redundancy is needed as Cygwin Tcl has a nasty habit
of setting pane sizes to zero if their slaves are not configured with a
specific size, but Linux Tcl does not honor the specific size given.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 13 Feb 2007 00:28:15 +0000 (16:28 -0800)]
Add RPM target for git-gui
Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 12 Feb 2007 23:20:34 +0000 (18:20 -0500)]
Link git-gui into the master Makefile.
I'm exporting gitexecdir because git-gui wants to know where
it should install git-gui and git-citool. These belong under
gitexecdir, just like git-diff, as the git wrapper is able to
invoke these commands for the end-user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 13 Feb 2007 00:07:29 +0000 (16:07 -0800)]
Merge branch 'master' of git://repo.or.cz/git-gui
* 'master' of git://repo.or.cz/git-gui:
git-gui: Change base version to 0.6.
git-gui: Guess our version accurately as a subproject.
git-gui: Handle gitgui tags in version gen.
git-gui: Generate a version file on demand.
git-gui: Rename GIT_VERSION to GITGUI_VERSION.
git-gui: Allow gitexecdir, INSTALL to be set by the caller.
Shawn O. Pearce [Mon, 12 Feb 2007 22:45:21 +0000 (17:45 -0500)]
git-gui: Change base version to 0.6.
This is the start of the 0.6 series of git-gui. I'm calling it 0.6
(rather than any other value) as I already had a private tag on
one system based on 0.5, and that tag is quite a bit behind this
version.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 12 Feb 2007 22:05:10 +0000 (17:05 -0500)]
git-gui: Guess our version accurately as a subproject.
When we are included as a subproject, such as how git.git carries
us, we want to retain our own version number and not the version
number assigned by git.git's own tags. Consequently we need to
locate the correct tag which applies to our tree content and
its commit lineage.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 12 Feb 2007 21:38:29 +0000 (16:38 -0500)]
git-gui: Handle gitgui tags in version gen.
I've decided to use gitgui-0.5 as the format for tags in the
git-gui repository. The prefix of gitgui was chosen here to
make its namespace different from the namespace used by git
itself, allowing developers to pull both tag namespaces into
the same repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 12 Feb 2007 21:14:44 +0000 (16:14 -0500)]
git-gui: Generate a version file on demand.
Because git-gui is being shipped as a subproject of the main
Git project and will often have a different lifecycle than
the main Git project, we should ship our own version number
in the release tarball rather than relying on the main Git
version file.
Git's master Makefile will invoke our own with the target
dist-version, asking us to save off our GITGUI_VERSION value
into our own version file, so that our GIT-VERSION-GEN script
can recover it at build time.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>