drm/i915/icl: Drop port parameter to icl_get_combo_buf_trans()

The port parameter hasn't been used since the last bspec phy programming
update.  Drop it to make some upcoming changes simpler.

References: 9659c1af451a ("drm/i915/icl: combo port vswing programming changes per BSPEC")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626000352.31926-2-matthew.d.roper@intel.com

drm/i915/guc: Avoid reclaim locks during reset

During reset, we must be very selective in which locks we take as most
are tainted by being held across a wait or reclaim (kmalloc) which
implicitly waits. Inside the guc reset path, we reset the ADS to sane
defaults, but must keep it pinned from initialisation to avoid having to
pin it during reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190701100502.15639-1-chris@chris-wilson.co.uk

drm/i915: WARN about invalid lane reversal in TBT-alt/DP-alt modes

Lane reversal happens only in the FIA module for TBT-alt/DP-alt mode, so
WARN if lane reversal is attempted at a different level. See the
BSpec DDI_BUF_CTL register description.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-24-imre.deak@intel.com

drm/i915: Remove unneeded disconnect in TypeC legacy port mode

Disconnecting the TypeC PHY when the port is in legacy mode is not
necessary:
- BSpec doesn't specify a disconnect sequence for legacy mode.
- The use of the PHY is dedicated for the display in legacy mode.
- We keep the PHY always connected during runtime as well in legacy
  mode.

We disconnect the PHY when needed during a disabling modeset for the
port, so we can also remove the disconnect call from the destroy hook.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-23-imre.deak@intel.com

drm/i915: Add state verification for the TypeC port mode

Add state verification for the TypeC port mode wrt. the port's AUX power
well enabling/disabling. Also check the correctness of changing the port
mode:
- When enabling/disabling the AUX power well for a TypeC port we must hold
  the TypeC port lock - the case for AUX transfers - or hold a Type C
  port link reference - the case for modeset enabling/disabling.
- When changing the TypeC port mode the port's AUX power domain must be
  disabled.

v2: (Ville)
- Simplify power_well_async_ref_count().
- Fix the commit log, clarifying what are the valid conditions to
  enable/disable the AUX power wells.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-22-imre.deak@intel.com

drm/i915: Keep the TypeC port mode fixed when the port is active

The TypeC port mode needs to stay fixed whenever the port is active. Do
that by introducing a tc_link_refcount to account for active ports,
avoiding changing the port mode if a reference is held.

During the modeset commit phase we also have to reset the port mode and
update the active PLL reflecting the new port mode. We can do this only
once the port and its old PLL has been already disabled. Add the new
encoder update_prepare/complete hooks that are called around the whole
enabling sequence. The TypeC specific hooks of these will reset the port
mode, update the active PLL if the port will be active and ensure that
the port mode will stay fixed for the duration of the whole enabling
sequence by holding a tc_link_refcount.

During the port enabling, the pre_pll_enable/post_pll_disable hooks will
take/release a tc_link_refcount to ensure the port mode stays fixed
while the port is active.

Changing the port mode should also be avoided during connector detection
and AUX transfers if the port is active, we'll do that by checking the
port's tc_link_refcount.

When resetting the port mode we also have to take into account the
maximum lanes provided by the FIA. It's guaranteed to be 4 in TBT-alt
and legacy modes, but there may be less lanes available in DP-alt mode,
in which case we have to fall back to TBT-alt mode.

While at it also update icl_tc_phy_connect()'s code comment, reflecting
the current way of switching the port mode.

v2:
- Add the update_prepare/complete hooks to the encoder instead of the
  connector. (Ville)
- Simplify intel_connector_needs_modeset() by removing redundant if.
  (Ville)
v3:
- Fix sparse warning, marking static functions as such.
v4:
- Rebase on drm-tip.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-21-imre.deak@intel.com

drm/i915/icl: Reserve all required PLLs for TypeC ports

When enabling a TypeC port we need to reserve all the required PLLs for
it, the TBT PLL for TBT-alt and the MG PHY PLL for DP-alt/legacy sinks.
We can select the proper PLL for the current port mode from the reserved
PLLs only once we selected and locked down the port mode for the whole
duration of the port's active state. Resetting and locking down the port
mode can in turn happen only during the modeset commit phase once we
disabled the given port and the PLL it used.

To support the above reserve-and-select PLL semantic we store the
reserved PLLs along with their HW state in the CRTC state and provide a
way to select the active PLL from these. The selected PLL along with its
HW state will be pointed at by crtc_state->shared_dpll/dpll_hw_state as
in the case of other port types.

Besides reserving all required PLLs no functional changes.

v2:
- Fix releasing the ICL PLLs, not clearing the PLLs from the old
  crtc_state.
- Init port_dpll to ICL_PORT_DPLL_DEFAULT closer to where port_dpll is
  used for symmetry with the corresponding ICL_PORT_DPLL_MG_PHY init.
  (Ville)
v3:
- Add FIXME: for clearing the ICL port PLLs from the new crtc state.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-20-imre.deak@intel.com

drm/i915/icl: Split getting the DPLLs to port type specific functions

For clarity factor out the combo PHY and TypeC PHY specific code from
icl_get_dplls() into their own functions.

No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-19-imre.deak@intel.com

drm/i915: Sanitize the shared DPLL find/reference interface

Pass the PLL HW state to the PLL find/reference functions making it
clearer what is their input. Also pass to these the atomic state and the
CRTC object instead of the CRTC state, since they don't require the
latter.

Move setting the PLL in the crtc_state to the get_dpll() hook, which
is the more logical place for this, where the related PLL HW state was also
set.

This refactoring is also a preparation for a follow-up patch that will
have to find/reference multiple PLLs.

No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-18-imre.deak@intel.com

drm/i915: Sanitize the shared DPLL reserve/release interface

For consistency s/intel_get_shared_dpll()/intel_reserve_shared_dplls()/
to better match intel_release_shared_dplls(). Also, pass to the
reserve/release and get_dplls/put_dplls hooks the intel_atomic_state and
CRTC object, that way these functions can look up the old or new state
as needed.

Also release the PLLs from the atomic state via a new
put_dplls->intel_unreference_shared_dpll() call chain for better
symmetry with the reservation via the
get_dplls->intel_reference_shared_dpll() call chain.

Since nothing uses the PLL returned by intel_reserve_shared_dplls(),
make it return only a bool.

While at it also clarify the reserve/release function docbook headers
making it clear that multiple DPLLs will be reserved/released and
whether the new or old atomic CRTC state is affected.

This refactoring is also a preparation for a follow-up change that needs
to reserve multiple DPLLs.

Kudos to Ville for the idea to pass intel_atomic_state around, to make
things clearer locally where an object's old/new atomic state is
required.

No functional changes.

v2:
- Fix checkpatch issue: typo in code comment.
v3:
- Rebase on drm-tip.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-17-imre.deak@intel.com

drm/i915: Sanitize the TypeC FIA lane configuration decoding

Use hex numbers, since that makes more sense when decoding a bit pattern.

No functional change.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-16-imre.deak@intel.com

drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers

We must keep the TypeC port mode fixed for the duration of the connector
detection and each AUX transfers. Add a new TypeC lock holding it around
these two sequences. For consistency also hold the lock during the port
mode sanitization.

Whenever resetting the port mode (only during the detection for now) the
port's AUX power domain must be disabled already. Flush the async power
domain disabling work to ensure this.

A follow-up patch will make the port mode changing more robust by
postponing the change for active ports.

v2:
- Fix checkpatch issue: missing annotation for tc_lock.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-15-imre.deak@intel.com

drm/i915: Fix the TypeC port mode sanitization during loading/resume

For using the correct AUX power domains we have to sanitize the TypeC
port mode early, so move that before encoder sanitization. To do this
properly read out the actual port mode instead of just relying on the
VBT legacy port flag (which can be incorrect).

We also verify that the PHY is connected as expected if the port is
active. In case the port is inactive we connect the PHY in case of a
legacy port - as we did so far. The PHY will be connected during
detection for DP-alt mode - as it was done so far. For TBT-alt mode
nothing needs to be done to connect the PHY.

v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
v3:
- Detect TCCOLD any time PORT_TX_DFLEXDPCSSS is read. (Ville)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-14-imre.deak@intel.com

drm/i915: Sanitize the TypeC connect/detect sequences

Make the order during detection more consistent: first reset the TypeC
port mode if needed (adding new helpers for this), then detect any
connected sink.

To check if a port mode reset is needed determine first the target port
mode based on the live status if a sink is already connected or the
PHY status complete flag otherwise.

Add a WARN in legacy mode if unexpectedly we can't set the unsafe mode
or if the FIA doesn't provide the 4 lanes required.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-13-imre.deak@intel.com

drm/i915: Handle the TCCOLD power-down event

Based on a recent BSpec update (Index/21750) we must handle the TCCOLD
event associated with the DP-alt mode. We can detect this event by
reading an invalid all-1s value from FIA registers.

After detecting TCCOLD we will:
- fall back to TBT-alt mode when attempting to switch to DP-alt mode
- conclude that nothing is connected during live status detection
- WARN when already in unsafe mode, since then TCCOLD is unexpected

v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
v3:
- Use 0xffffffff instead of -1 as invalid FIA reg value.
  (José, Ville)
- Check for TCCOLD in icl_tc_phy_status_complete() too. (Ville)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-12-imre.deak@intel.com

drm/i915: Wait for TypeC PHY complete flag to clear in safe mode

The PHY status complete flag normally clears when disconnecting the PHY
in DP-alt mode (achieved by switching to safe mode), so wait for the
flag to clear.

v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-11-imre.deak@intel.com

drm/i915: Factor out common parts from TypeC port handling functions

Factor out helpers reading/parsing the TypeC specific registers, making
current users of them clearer and letting us use them later.

While at it also:
- Simplify icl_tc_phy_connect() with an early return in legacy mode.
- Simplify the live status check using one bitmask for all HPD bits.
- Remove a micro-optimisation of the repeated safe-mode clearing.
- Make sure we fix the legacy port flag in all cases.

Except for the last two, no functional changes.

v2:
- Don't do reg reads at variable declarations. (Jani)
- Prevent constant truncated compiler warning when assigning the
  valid_hpd_mask. (Nick)
- s/intel_tc_port_get_lane_info/intel_tc_port_get_lane_mask/ (Ville)
v3:
- Make valid_hpd_mask init clear. (Ville)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-10-imre.deak@intel.com

drm/i915: Unify the TypeC port notation in debug/error messages

Unify the TypeC port notation in log messages, so that it matches the
spec. For instance the first ICL TypeC port will read as 'Port C/TC#1'.

v2:
- Format print the name only once. (José)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-9-imre.deak@intel.com

drm/i915: Use the correct AUX power domain in TypeC TBT-alt mode

In the TypeC TBT-alt port mode we must use the TBT AUX power domain,
fix that.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-8-imre.deak@intel.com

drm/i915: Fix the TBT AUX power well enabling

Fix the mapping from a TBT AUX power well index to the DP_AUX_CH_CTL
register.

Fixes: c7375d9542f1 ("drm/i915: Configure AUX_CH_CTL when enabling the AUX power domain")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-7-imre.deak@intel.com

drm/i915: Don't enable the DDI-IO power in the TypeC TBT-alt mode

According to the spec we should not enable the DDI-IO power domain if
the TypeC port is in the TBT-alt mode, so do that only in the other
TypeC modes or for non-TypeC ports. See the internal BSpec Index/22243.

v2:
- Add the internal BSpec reference to the log message. (José)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-6-imre.deak@intel.com

drm/i915: Sanitize the terminology used for TypeC port modes

The TypeC port mode can switch dynamically, to reflect that better call
the port's mode as 'mode' rather than 'type'.

While at it:
- s/TC_PORT_TBT/TC_PORT_TBT_ALT/ and s/TC_PORT_TYPEC/TC_PORT_DP_ALT/.
  'TYPEC' is ambiguous, TBT_ALT and DP_ALT better match the reality.

- Remove the 'unknown' TypeC port mode. The mode is always known, it's
  the TBT-alt/safe mode after HW reset and after disconnecting the PHY.
  Simplify the tc_port/tc_type checks accordingly.

- Don't WARN if the port mode changes, that can happen normally.

No functional changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-5-imre.deak@intel.com

drm/i915: Move the TypeC port handling code to a separate file

Move the TypeC port handling functions to a new file for clarity.

While at it:
- s/icl_tc_port_connected()/intel_tc_port_connected()/
  icl_tc_phy_disconnect(), will be unexported later.

- s/intel_dp_get_fia_supported_lane_count()/
    intel_tc_port_fia_max_lane_count()/
  It's used for HDMI legacy mode too.

- Simplify function interfaces by passing only dig_port to them.

No functional changes.

v2:
- Fix checkpatch issues: +1/-1 empty lines in intel_tc.c and add
  missing SPDX to intel_tc.h. (Jani)

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-4-imre.deak@intel.com

drm/i915: Tune down WARNs about TBT AUX power well enabling

The HW completion flag for the TBT AUX power well enabling/disabling
gets stuck if the firmware tears down the TBT DP tunnel before the
completion.

We shouldn't complain about the timeout, since it's expected to happen
and doesn't cause further issues. We suppress the disabling timeout
already, do the same for enabling.

v2:
- Make the debug message more precise. (José)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-3-imre.deak@intel.com

drm/i915/icl: Add support to read out the TBT PLL HW state

Add support to read out the TBT PLL HW state.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-2-imre.deak@intel.com

drm/i915: Use intel state as much as possible in wm code

Instead of directly referencing drm_crtc_state, convert to
intel_ctc_state and use the base struct. This is useful when we're
making the split between uapi and hw state, and also makes the
code slightly more readable.

A lot of places also use cstate, instead of the more common crtc_state.
Clean those up to use crtc_state. Same for pstate vs plane_state. (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628085517.31886-7-maarten.lankhorst@linux.intel.com

drm/i915: Pass intel state to plane functions as well

Pass along the correct state as much as possible, instead of relying
on the drm state internally. This is required to rely on hw state
internally soon.

While at it, clean up intel_plane_atomic_check slightly, by using a
helper function to get the intel_crtc. (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628085517.31886-6-maarten.lankhorst@linux.intel.com

drm/i915: Use intel_crtc_state in sanitize_watermarks() too

Get rid of all instances of drm_crtc_state, and rename cstate to
crtc_state for more clarity.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628085517.31886-5-maarten.lankhorst@linux.intel.com

drm/i915: Convert hw state verifier to take more intel state, v2.

Like the rest of the intel atomic functions we should pass along
intel_crtc_state, and dereference drm_crtc_state only through
intel_crtc_state->base

While at it, rename old/new_state to old/new_crtc_state. (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628085517.31886-4-maarten.lankhorst@linux.intel.com

drm/i915: Convert most of atomic commit to take more intel state

Instead of passing along drm_crtc_state and drm_atomic_state, pass
along more intel_atomic_state and intel_crtc_state. This will
make the code more readable by not casting between drm state
and intel state all the time.

While at it, rename old_state to state, with the get_new/old helpers
there is no point in distinguishing between state before and after
swapping state any more. (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628085517.31886-3-maarten.lankhorst@linux.intel.com

drm/i915: Pass intel_crtc_state to needs_modeset()

In i915 we should use intel_crtc_state as much as possible, pass
intel_crtc_state to needs_modeset, before we clean up all other uses
of drm_crtc_state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628085517.31886-2-maarten.lankhorst@linux.intel.com

drm/i915: rework reading pipe disable fuses

This prepares to have possibly more than 3 pipes. I didn't want to
continue the previous approach since the check for "are the disabled
pipes the last ones" poses a combinatory explosion. We need that check
because in several places of the code we have that assumption. If that
ever becomes false in a new HW, other parts of the code would have to
change.

Now we start by considering we have info->num_pipes enabled and disable
each pipe that is marked as disabled. Then it's a simple matter of
checking if we have at least one pipe and that all the enabled ones are
the first pipes, i.e. there are no holes in the bitmask.

Cc: Jose Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625175437.14840-3-lucas.demarchi@intel.com

drm/i915: Make i945gm_vblank_work_func static

drivers/gpu/drm/i915/i915_irq.c:3382:6: warning: symbol 'i945gm_vblank_work_func' was not declared. Should it be static?
  CC [M]  drivers/gpu/drm/i915/i915_irq.o
drivers/gpu/drm/i915/i915_irq.c:3382:6: error: no previous prototype for ‘i945gm_vblank_work_func’ [-Werror=missing-prototypes]
 void i945gm_vblank_work_func(struct work_struct *work)

Jani wrote the idential patch, so for posterity:

The static keyword was apparently accidentally removed in commit
08fa8fd0faa5 ("drm/i915: Switch to per-crtc vblank vfuncs"), leading to
sparse warning:

drivers/gpu/drm/i915/i915_irq.c:3382:6: warning: symbol
'i945gm_vblank_work_func' was not declared. Should it be static?

Make the function static again.

Meanwhile, the 0-day kbuilder also spotted the mistake.

Fixes: 08fa8fd0faa5 ("drm/i915: Switch to per-crtc vblank vfuncs")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626224212.10141-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20190627091914.30795-1-jani.nikula@intel.com

drm/i915: make intel_uc_fw.h self-contained

Add the minimal includes/declarations to make the header self-contained,
and ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626144020.2155-13-jani.nikula@intel.com

drm/i915: make intel_gvt.h self-contained

Add the minimal includes/declarations to make the header self-contained,
and ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626144020.2155-12-jani.nikula@intel.com

drm/i915: make intel_guc_reg.h self-contained

Add the minimal includes/declarations to make the header self-contained,
and ensure it stays that way.

v2: also include i915_reg.h (Michal)

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626144020.2155-11-jani.nikula@intel.com

drm/i915: make intel_guc_fwif.h self-contained

Add the minimal includes/declarations to make the header self-contained,
and ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626144020.2155-10-jani.nikula@intel.com

drm/i915: make intel_guc_ct.h self-contained

Add the minimal includes/declarations to make the header self-contained,
and ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626144020.2155-9-jani.nikula@intel.com

drm/i915: make i915_vgpu.h self-contained

Add the minimal includes/declarations to make the header self-contained,
and ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626144020.2155-8-jani.nikula@intel.com

drm/i915: make i915_pvinfo.h self-contained

Add the minimal includes/declarations to make the header self-contained,
and ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626144020.2155-7-jani.nikula@intel.com

drm/i915: make i915_globals.h self-contained

Add the minimal includes/declarations to make the header self-contained,
and ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626144020.2155-6-jani.nikula@intel.com

drm/i915: make i915_fixed.h self-contained

Add the minimal includes/declarations to make the header self-contained,
and ensure it stays that way.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626144020.2155-4-jani.nikula@intel.com

drm/i915: add header search path to subdir Makefiles

With the subdirectories we lost the ability to build individual files on
the command line, for example:

$ make drivers/gpu/drm/i915/display/intel_display.o

This was due to the top level directory missing from header search
path. Add the header search paths to subdir Makefiles.

Note that none of the other options in the top level i915 Makefile are
taken into account when building individual files. Usually this is not a
concern.

Reported-by: Imre Deak <imre.deak@intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626143618.21800-2-jani.nikula@intel.com

drm/i915: prefix header search path with $(srctree)/

Per commit 43068cb7ba1f ("drm: prefix header search paths with
$(srctree)/") this is what we should be doing. Follow suit.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626143618.21800-1-jani.nikula@intel.com

drm/i915: Move OA files to separate folder

OA files look to be auto-generated so we can keep them all in
dedicated subdirectory.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626123826.39760-1-michal.wajdeczko@intel.com

drm/i915/ehl: Add voltage level requirement table

EHL has it own voltage level requirement depending on cd clock.

BSpec: 21809
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626014053.30541-3-jose.souza@intel.com

drm/i915/ehl: Remove unsupported cd clocks

EHL do not support 648 and 652.8 MHz.

v2:
- Limiting maximum CD clock by max_cdclk_freq instead of remove it
from icl_calc_cdclk()(Ville and Jani)

BSpec: 20598
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626014053.30541-2-jose.souza@intel.com

drm/i915/icl: Add new supported CD clocks

Now 180, 172.8 and 192 MHz are supported.

180 and 172.8 MHz CD clocks will only be used when audio is not
enabled as state by BSpec and implemented in
intel_crtc_compute_min_cdclk(), CD clock must be at least twice of
Azalia BCLK and BCLK by default is 96 MHz, it could be set to 48 MHz
but we are not reading it.

v3:
- making icl clock arrays static (Ville)

BSpec: 20598
BSpec: 15729
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626014053.30541-1-jose.souza@intel.com

drm/i915: Lift intel_engines_resume() to callers

Since the reset path wants to recover the engines itself, it only wants
to reinitialise the hardware using i915_gem_init_hw(). Pull the call to
intel_engines_resume() to the module init/resume path so we can avoid it
during reset.

Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-3-chris@chris-wilson.co.uk

drm/i915: Only recover active engines

If we issue a reset to a currently idle engine, leave it idle
afterwards. This is useful to excise a linkage between reset and the
shrinker. When waking the engine, we need to pin the default context
image which we use for overwriting a guilty context -- if the engine is
idle we do not need this pinned image! However, this pinning means that
waking the engine acquires the FS_RECLAIM, and so may trigger the
shrinker. The shrinker itself may need to wait upon the GPU to unbind
and object and so may require services of reset; ergo we should avoid
the engine wake up path.

The danger in skipping the recovery for idle engines is that we leave the
engine with no context defined, which may interfere with the operation of
the power context on some older platforms. In practice, we should only
be resetting an active GPU but it something to look out for on Ironlake
(if memory serves).

Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-2-chris@chris-wilson.co.uk

drm/i915: Add a wakeref getter for iff the wakeref is already active

For use in the next patch, we want to acquire a wakeref without having
to wake the device up -- i.e. only acquire the engine wakeref if the
engine is already active.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-1-chris@chris-wilson.co.uk

drm/i915: Initialize drm_driver vblank funcs at compile time

Move the .get_vblank_timestamp() and .get_scanout_position()
initialization to happen at compile time. No point in delaying
it since we always assign the same functions.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619170842.20579-5-ville.syrjala@linux.intel.com

drm/i915: Nuke drm_driver irq vfuncs

Stop using the irq vfuncs under drm_driver. That's not going to fly
in a mixed gen environment since the structure is shared between all
the devices.

v2: Allow intel_irq_uninstall() to be called twice due to
    intel_modeset_cleanup() calling it as well. Toss in a
    FIXME to remind us that this is not great.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620103334.15651-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Switch to per-crtc vblank vfuncs

Switch from the driver-wide vblank vfuncs to the per-crtc ones so that
we don't have so many platform specific vfuncs in the driver struct.

We still need to do something about the rest fo the irq vfuncs...

v2: s/INTEL_GEN>=3/IS_GEN3/

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619170842.20579-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Fix various tracepoints for gen2

Gen2 doesn't have a frame counter and apparently we no longer provide
a fake .get_vblank_counter() hook for it. That means all tracepoints
calling that hook will oops. Update the tracepoints to use
intel_crtc_get_vblank_counter() which will gracefully fall back to
using the software counter. This is actually a better approach since
we now get (hopefully accurate) frame numbers in the traces.

This also gets rid of the raw driver->get_vblank_counter() calls, which
we need to do in order to switch to the per-crtc vblank vfuncs.

v2: Deal with new tracepoints
v3: Use a distinct variable name for the internal crtc iterator (Chris)

Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 967dd4841787 ("drm: remove drm_vblank_no_hw_counter assignment from driver code")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619170842.20579-2-ville.syrjala@linux.intel.com

drm/i915/selftests: Fixup atomic reset checking

We require that the intel_gpu_reset() was atomic, not the whole of
i915_reset() which is guarded by a mutex. However, we do require that
i915_reset_engine() is atomic for use from within the submission tasklet.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626134433.6318-3-chris@chris-wilson.co.uk

drm/i915/selftests: Drop manual request wakerefs around hangcheck

We no longer need to manually acquire a wakeref for request emission, so
drop the redundant wakerefs, letting us test our wakeref handling more
precisely.

References: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626134433.6318-2-chris@chris-wilson.co.uk

drm/i915/selftests: Serialise nop reset with retirement

In order for the reset count to be accurate across our selftest, we need
to prevent the background retire worker from modifying our expected
state. To preserve the intent of symmetry, we apply this to both
i915_reset and i915_reset_engine, even though it strictly only affects
i915_reset_engine currently.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626134433.6318-1-chris@chris-wilson.co.uk

drm/i915: Check backlight type while doing eDP backlight initializaiton

If LFP backlight type setting from VBT was "VESA eDP AUX Interface".
Driver should check panel capability and try to initialize aux backlight.
No matter i915_modparams.enable_dpcd_backlight was enabled or not.

v2: access dev_priv->vbt.backlight.type directly and remove unused function.
v3: 1. Modify i915.enable_dpcd_backlight type from bool to int and give default
       value as 0 (disable).
    2. Add a judgement to check LFP backlight type was aux interface or not.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1561045456-12171-1-git-send-email-shawn.c.lee@intel.com

drm/i915/icl: Add missing device ID

We are missing PCI device ID for SKU ICLLP U GT 1.5F (0x8A54) as per BSPec.

BSpec: 19092

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617082413.22549-1-mika.kahola@intel.com

drm/i915/gt: Add some debug tracing for context pinning

Add the context pin/unpin events to the trace for post-mortem debugging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625194859.28005-1-chris@chris-wilson.co.uk

drm/i915/gt: Always call kref_init for the timeline

Always initialise the refcount, even for the embedded timelines inside
mock devices.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625233349.32371-2-chris@chris-wilson.co.uk

drm/i915/gt: Drop stale commentary for timeline density

We no longer allocate a contiguous set of timeline ids for all engines
upon creation, so we no longer should assume that the timelines are
densely allocated within a context. Hopefully, the set of fences used
within a workload are still dense enough for us to take advantage of
the compressed radix tree used for the syncmap.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625233349.32371-1-chris@chris-wilson.co.uk

drm/i915/selftests: Hold ref on request across waits

As we wait upon the request, we should be sure to hold our own reference
for our checks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625130128.11009-14-chris@chris-wilson.co.uk

drm/i915: Rename intel_wakeref_[is]_active

Our general rule is to use is/has as the verb for boolean functions,
rename intel_wakeref_active to intel_wakeref_is_active so the question
being asked is clear.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625130128.11009-6-chris@chris-wilson.co.uk

drm/i915/gt: Pass intel_gt to pm routines

Switch from passing the i915 container to newly named struct intel_gt.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625130128.11009-2-chris@chris-wilson.co.uk

drm/i915/guc: Add debug capture of GuC exception

Detect GuC firmware load failure due to an exception during execution
in GuC firmware. Output the GuC EIP where exception occurred to dmesg
for GuC debug information.

v2: correct typos, change debug message and error code returned for
GuC exception (Michal)

Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625164107.21512-1-robert.m.fosha@intel.com

drm/i915/execlists: Convert recursive defer_request() into iterative

As this engine owns the lock around rq->sched.link (for those waiters
submitted to this engine), we can use that link as an element in a local
list. We can thus replace the recursive algorithm with an iterative walk
over the ordered list of waiters.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625130128.11009-1-chris@chris-wilson.co.uk

drm/i915/ehl: Add missing VECS engine

EHL can have up to one VECS(video enhancement) engine, so add it to
the device_info.

BSpec: 29152
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614213749.15870-1-jose.souza@intel.com

drm/i915/ehl: Add one additional PCH ID to MCC

There's one additional ID that we should treat as Mule Creek Canyon.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621151847.31302-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/perf: fix ICL perf register offsets

We got the wrong offsets (could they have changed?). New values were
computed off an error state by looking up the register offset in the
context image as written by the HW.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 1de401c08fa805 ("drm/i915/perf: enable perf support on ICL")
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610081914.25428-1-lionel.g.landwerlin@intel.com

drm/i915: Disable SAMPLER_STATE prefetching on all Gen11 steppings.

The Demand Prefetch workaround (binding table prefetching) only applies
to Icelake A0/B0.  But the Sampler Prefetch workaround needs to be
applied to all Gen11 steppings, according to a programming note in the
SARCHKMD documentation.

Using the Intel Gallium driver, I have seen intermittent failures in
the dEQP-GLES31.functional.copy_image.non_compressed.* tests.  After
applying this workaround, the tests reliably pass.

v2: Remove the overlap with a pre-production w/a

BSpec: 9663
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625090655.19220-1-chris@chris-wilson.co.uk

drm/i915/gem: Clear read/write domains for GPU clear

Update the domains for the write via the GPU so that we do not
shortcircuit any set-domain clflush afterwards.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110978
Fixes: b2dbf8d982a4 ("drm/i915/blt: Remove recursive vma->lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190624141630.11015-1-chris@chris-wilson.co.uk

drm/i915/execlists: Always clear ring_pause if we do not submit

In the unlikely case (thank you CI!), we may find ourselves wanting to
issue a preemption but having no runnable requests left. In this case,
we set the semaphore before computing the preemption and so must unset
it before forgetting (or else we leave the machine busywaiting until the
next request comes along and so likely hang).

v2: Replace readback with only a wmb after asserting the semaphore

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190624092009.30189-1-chris@chris-wilson.co.uk

drm/i915/blt: Remove recursive vma->lock

As we have already plugged the w->dma into the reservation_object, and
have set ourselves up to automatically signal the request and w->dma on
completion, we do not need to export the rq->fence directly and just use
the w->dma fence.

This avoids having to take the reservation_lock inside the worker which
cross-release lockdep would complain about. :)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621215733.12070-1-chris@chris-wilson.co.uk

drm/i915: Local debug BUG_ON for intel_wakeref

Avoid pulling in i915_gem.h just so that we can use a conditional BUG_ON
for debugging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621183801.23252-5-chris@chris-wilson.co.uk

drm/i915: Provide an i915_active.acquire callback

If we introduce a callback for i915_active that is only called the first
time we use the i915_active and is symmetrically paired with the
i915_active.retire callback, we can replace the open-coded and
non-atomic implementations -- which will be very fragile (i.e. broken)
upon removing the struct_mutex serialisation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621183801.23252-4-chris@chris-wilson.co.uk

drm/i915: Throw away the active object retirement complexity

Remove the accumulated optimisations that we have for i915_vma_retire
and reduce it to the bare essential of tracking the active object
reference. This allows us to only use atomic operations, and so will be
able to avoid the struct_mutex requirement.

The principal loss here is the shrinker MRU bumping, so now if we have
to shrink, we will do so in much more random order and more likely to
try and shrink recently used objects. That is a nuisance, but shrinking
active objects is a second step we try to avoid and will always be a
system-wide performance issue.

The other loss is here is in the automatic pruning of the
reservation_object when idling. This is not as large an issue as upon
reservation_object introduction as now adding new fences into the object
replaces already signaled fences, keeping the array compact. But we do
lose the auto-expiration of stale fences and unused arrays. That may be
a noticeable problem for which we need to re-implement autopruning.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621183801.23252-3-chris@chris-wilson.co.uk

drm/i915: Track i915_active using debugobjects

Provide runtime asserts and tracking of i915_active via debugobjects.
For example, this should allow us to check that the i915_active is only
active when we expect it to be and is never freed too early.

One consequence is that, for simplicity, we no longer allow i915_active
to be on-stack which only affected the selftests.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621183801.23252-2-chris@chris-wilson.co.uk

drm/i915: Remove waiting & retiring from shrinker paths

i915_gem_wait_for_idle() and i915_retire_requests() introduce a
dependency on the timeline->mutex. This is problematic as we want to
later perform allocations underneath i915_active.mutex, forming a link
between the shrinker, the timeline and active mutexes. Nip this cycle in
the bud by removing the acquisition of the timeline mutex (i.e.
retiring) from inside the shrinker.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621183801.23252-1-chris@chris-wilson.co.uk

drm/i915/guc: handle GuC messages received with CTB disabled

There is a very small chance of triggering a log flush event when
enabling or disabling CT buffers. Events triggered while CT buffers
are disabled are logged in the SCRATCH_15 register using the same bits
used in the CT message payload. Since our communication channel with
GuC is turned off, we can save the message and handle it after we turn
it back on.
GuC should be idle and not generate more events in the meantime because
we're not talking to it.

v2: clear the mmio register on stop_communication as well (Chris)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621182123.31368-2-daniele.ceraolospurio@intel.com

drm/i915/guc: reorder enable/disable communication steps

Make sure we always have CT buffers enabled when the interrupts are
enabled, so we can always handle interrupts from GuC. Also move the
setting of the guc->send and guc->handler functions to the GuC
communication control functions for consistency.

The reorder also fixes the onion unwinding of intel_uc_init_hw, because
guc_enable_communication would've left interrupts enabled when failing
to enable CTB.

v2: always retunr the result of ctch_enable() in
    intel_guc_ct_enable() (Michal)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110943
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621182123.31368-1-daniele.ceraolospurio@intel.com

drm/i915/gt: Fixup kerneldoc parameters

drivers/gpu/drm/i915/gt/intel_mocs.c:513: warning: Function parameter or member 'gt' not described in 'intel_mocs_init_l3cc_table'
 drivers/gpu/drm/i915/gt/intel_mocs.c:513: warning: Excess function parameter 'dev_priv' description in 'intel_mocs_init_l3cc_table'

intel_vgt_balloon/deballoon, i915_ggtt_probe_hw intel_wopcm_init_hw need
similar treatment

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621131640.28864-2-chris@chris-wilson.co.uk

drm/i915/gt: Rename i915_gt_timelines

Since the anonymous i915_gt became struct intel_gt and encloses
struct i915_gt_timelines, rename i915_gt_timelines to intel_gt_timelines
to match its parentage.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621131640.28864-1-chris@chris-wilson.co.uk

drm/i915: Prevent dereference of engine before NULL check in error capture

smatch caught,
drivers/gpu/drm/i915/i915_gpu_error.c:1418 gem_record_rings() warn: variable dereferenced before check 'engine' (see line 1413)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621135246.20683-1-chris@chris-wilson.co.uk

drm/i915: Eliminate dual personality of i915_scratch_offset

Scratch vma lives under gt but the API used to work on i915. Make this
consistent by renaming the function to intel_gt_scratch_offset and make
it take struct intel_gt.

v2:
 * Move to intel_gt. (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-33-tvrtko.ursulin@linux.intel.com

drm/i915: Rename i915_timeline to intel_timeline and move under gt

Move all timeline code under gt and rename to intel_gt prefix.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-32-tvrtko.ursulin@linux.intel.com

drm/i915: Make timelines gt centric

Our timelines are stored inside intel_gt so we can convert the interface
to take exactly that and not i915.

At the same time re-order the params to our more typical layout and
replace the backpointer to the new containing structure.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-31-tvrtko.ursulin@linux.intel.com

drm/i915: Save trip via top-level i915 in a few more places

For gt related operations it makes more logical sense to stay in the realm
of gt instead of dereferencing via driver i915.

This patch handles a few of the easy ones with work requiring more
refactoring still outstanding.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-30-tvrtko.ursulin@linux.intel.com

drm/i915: Compartmentalize ring buffer creation

Continuing on the theme of compartmentalizing the code better to make
future split between gt and display in global i915 clearer.

v2:
 * Pass in ggtt instead of gt. (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-29-tvrtko.ursulin@linux.intel.com

drm/i915: Store ggtt pointer in intel_gt

This will become useful in the following patch.

v2:
 * Assign the pointer through a helper on the top level to work around
   the layering violation. (Chris)

v3:
 * Handle selftests.

v4:
 * Move call to intel_gt_init_hw into mock_init_ggtt. (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-28-tvrtko.ursulin@linux.intel.com

drm/i915: Compartmentalize i915_gem_init_ggtt

Continuing on the theme of better logical organization of our code, make
the first step towards making the ggtt code better isolated from wider
struct drm_i915_private.

v2:
 * Bring the ickle onion unwind back. (Chris)
 * Rename to i915_init_ggtt. (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-27-tvrtko.ursulin@linux.intel.com

drm/i915: Compartmentalize i915_ggtt_cleanup_hw

Continuing on the theme of better logical organization of our code, make
the first step towards making the ggtt code better isolated from wider
struct drm_i915_private.

v2:
 * Cleanup of mm.wc_stash does not need struct_mutex. (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-26-tvrtko.ursulin@linux.intel.com

drm/i915: Compartmentalize timeline_init/park/fini

Continuing on the theme of better logical organization of our code, make
the first step towards making the timeline code better isolated from wider
struct drm_i915_private.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-25-tvrtko.ursulin@linux.intel.com

drm/i915: Move i915_gem_chipset_flush to intel_gt

This aligns better with the rest of restructuring.

v2:
 * Move call out of line. (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-24-tvrtko.ursulin@linux.intel.com

drm/i915: Convert i915_gem_flush_ggtt_writes to intel_gt

Having introduced struct intel_gt (named the anonymous structure in i915)
we can start using it to compartmentalize our code better. It makes more
sense logically to have the code internally like this and it will also
help with future split between gt and display in i915.

v2:
 * Keep ggtt flush before fb obj flush. (Chris)

v3:
 * Fix refactoring fail.
 * Always flush ggtt writes. (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-23-tvrtko.ursulin@linux.intel.com

drm/i915: Compartmentalize i915_gem_suspend/restore_gtt_mappings

Having made start to better code compartmentalization by introducing
struct intel_gt, continue the theme elsewhere in code by making functions
take parameters take what logically makes most sense for them instead of
the global struct drm_i915_private.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-22-tvrtko.ursulin@linux.intel.com

drm/i915: Store intel_gt backpointer in vm

This will come useful in the following patch.

v2:
 * Handle mock ggtt.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-21-tvrtko.ursulin@linux.intel.com

drm/i915: Make ggtt invalidation work on ggtt

It is more logical for ggtt invalidation to take ggtt as input parameter.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-20-tvrtko.ursulin@linux.intel.com

drm/i915: Compartmentalize i915_ggtt_init_hw

Having made start to better code compartmentalization by introducing
struct intel_gt, continue the theme elsewhere in code by making functions
take parameters take what logically makes most sense for them instead of
the global struct drm_i915_private.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621070811.7006-19-tvrtko.ursulin@linux.intel.com