OSDN Git Service
Alvin lee [Tue, 19 Jun 2018 19:40:09 +0000 (15:40 -0400)]
drm/amd/display: read DP sink and DP branch hardware and firmware revision from DPCD
- define new dpcd address in drm
- implement new members in dpcd_caps to store values read from new dpcd address
Signed-off-by: Alvin lee <alvin.lee3@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Tue, 19 Jun 2018 13:58:24 +0000 (09:58 -0400)]
drm/amd/display: Convert remaining loggers off dc_logger
- Removed dal/dm/dc loggers from linux, switched to kernel prints
- Modified functions that used these directly to use macros
- dc_logger support is completely dropped from Linux
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 9 May 2018 20:26:17 +0000 (16:26 -0400)]
drm/amd/display: Return aux replies directly to DRM
Currently we still go through DC code that does error checking, retries,
etc. There's no need for that since DRM already does that for us. This
simplifies the code a bit and makes it easier to debug.
This also ensures we correctly tell DRM how many bytes have actually
been read, as we should. This allows DRM to correctly read the EDID on
the Chamelium DP port.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 8 May 2018 20:28:31 +0000 (16:28 -0400)]
drm/amd/display: Break out function to simply read aux reply
DRM's DP helpers take care of dealing with the error code for us. In
order not to step on each other's toes we'll need to be able to simply
read auch channel replies without further logic based on return values.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 29 May 2018 17:11:55 +0000 (13:11 -0400)]
drm/amd/display: Serialize is_dp_sink_present
Access to GPIO needs to be serialized. Aux transactions are already
serialized in DRM but we also need to serialize access to the GPIO pin
for purposes of DP dongle detection.
Call is_dp_sink_present through DM so we can lock correctly. This
follows the same pattern used for DPCD transactions.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Mon, 18 Jun 2018 22:32:43 +0000 (18:32 -0400)]
drm/amd/display: Expose configure_encoder for link_encoder
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Mon, 18 Jun 2018 23:50:07 +0000 (19:50 -0400)]
drm/amd/display: Define couple extra DCN registers
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Mon, 18 Jun 2018 19:45:07 +0000 (15:45 -0400)]
drm/amd/display: Add Azalia registers to HW sequencer
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hugo Hu [Mon, 18 Jun 2018 19:27:58 +0000 (15:27 -0400)]
drm/amd/display: Correct calculation of duration time.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Tue, 5 Jun 2018 13:14:56 +0000 (09:14 -0400)]
drm/amd/display: dal 3.1.53
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Fri, 15 Jun 2018 18:25:48 +0000 (14:25 -0400)]
drm/amd/display: set-read link rate and lane count through debugfs
function description
get/ set DP configuration: lane_count, link_rate, spread_spectrum
valid lane count value: 1, 2, 4
valid link rate value:
06h = 1.62Gbps per lane
0Ah = 2.7Gbps per lane
0Ch = 3.24Gbps per lane
14h = 5.4Gbps per lane
1Eh = 8.1Gbps per lane
debugfs is located at /sys/kernel/debug/dri/0/DP-x/link_settings
--- to get dp configuration
xxd -l 300 phy_settings
It will list current, verified, reported, preferred dp configuration.
current -- for current video mode
verified --- maximum configuration which pass link training
reported --- DP rx report caps (DPCD register offset 0, 1 2)
preferred --- user force settings
--- set (or force) dp configuration
echo <lane_count> <link_rate>
for example, to force to 2 lane, 2.7GHz,
echo 4 0xa > link_settings
spread_spectrum could not be changed dynamically.
in case invalid lane count, link rate are force, no hw programming will be
done. please check link settings after force operation to see if HW get
programming.
xxd -l 300 link_settings
check current and preferred settings.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Sun, 17 Jun 2018 17:26:27 +0000 (13:26 -0400)]
drm/amd/display: fix incorrect check for atom table size
in case we have very few pins in the table, check fails and we can't boot
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Sat, 16 Jun 2018 23:43:41 +0000 (19:43 -0400)]
drm/amd/display: generic indirect register access
add generic indirect register access following our register access pattern
this will make it easier to review code and programming sequence,
with all the complexity hidden in macro
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Fri, 15 Jun 2018 21:53:35 +0000 (17:53 -0400)]
drm/amd/display: fix bug where we are creating bogus i2c aux
[WHY]
we were using 6 instances based on i2caux_dce110.c
[HOW]
pass in how many instances to ctor
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Fri, 15 Jun 2018 16:19:00 +0000 (12:19 -0400)]
drm/amd/display: Move common GPIO registers into a common define
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Fri, 15 Jun 2018 13:28:34 +0000 (09:28 -0400)]
drm/amd/display: Linux Set/Read link rate and lane count through debugfs
expose dc function to be called by linux dm
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Krunoslav Kovac [Thu, 14 Jun 2018 19:08:58 +0000 (15:08 -0400)]
drm/amd/display: Implement cursor multiplier
DCN allows cursor multiplier when blending FP16 surface.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Tue, 12 Jun 2018 22:37:12 +0000 (18:37 -0400)]
drm/amd/display: support access ddc for mst branch
[Why]
Megachip dockings accesses ddc line through display driver when
installing FW. Previously, we would fail every transaction because
link attached to mst branch did not have their ddc transaction type
set.
[How]
Set ddc transaction type when mst branch is connected.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Thu, 14 Jun 2018 20:06:10 +0000 (16:06 -0400)]
drm/amd/display: Add avoid_vbios_exec_table debug bit
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Fri, 8 Jun 2018 19:01:59 +0000 (15:01 -0400)]
drm/amd/display: Separate HUBP surface size and rotation/mirror programming
Separate HUBP surface size and rotation/mirror programming so that
HUBP revision without mirror/rotation do not access those register
fields.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 6 Jul 2018 14:54:33 +0000 (10:54 -0400)]
Revert "drm/amd/display: make dm_dp_aux_transfer return payload bytes instead of size"
This reverts commit
cc195141133ac3e767d930bedd8294ceebf1f10b.
This commit was problematic on other OSes. The real solution is to
leave all the error checking to DRM and don't do it in DC, which is
addressed by "Return aux replies directly to DRM" later in this patchset.
v2: Add reason for revert.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 6 Jul 2018 14:54:18 +0000 (10:54 -0400)]
Revert "drm/amd/display: Don't return ddc result and read_bytes in same return value"
This reverts commit
8a61bc085ffab3071c59efcbeff4044c034e7490.
Need to revert "make dm_dp_aux_transfer return payload bytes instead of
size", which this commit is based on. That commit was problematic on
other OSes. The real solution is to leave all the error checking to DRM
and don't do it in DC, which is addressed by "Return aux replies
directly to DRM" later in this patchset.
v2: Add reason for revert.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Wed, 11 Jul 2018 10:42:55 +0000 (12:42 +0200)]
drm/amdgpu: Warn and update pin_size values when destroying a pinned BO
This shouldn't happen, but if it does, we'll get a backtrace of the
caller, and update the pin_size values as needed.
v2:
* Check bo->pin_count instead of placement flags (Christian König)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Wed, 11 Jul 2018 10:00:40 +0000 (12:00 +0200)]
drm/amdgpu: Make pin_size values atomic
Concurrent execution of the non-atomic arithmetic could result in
completely bogus values.
v2:
* Rebased on v2 of the previous patch
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/106872
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Wed, 11 Jul 2018 10:06:31 +0000 (12:06 +0200)]
drm/amdgpu: Keep track of amount of pinned CPU visible VRAM
Instead of CPU invisible VRAM. Preparation for the following, no
functional change intended.
v2:
* Also change amdgpu_vram_mgr_bo_invisible_size to
amdgpu_vram_mgr_bo_visible_size, allowing further simplification
(Christian König)
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nayan Deshmukh [Fri, 13 Jul 2018 09:51:14 +0000 (15:21 +0530)]
drm/scheduler: modify args of drm_sched_entity_init
replace run queue by a list of run queues and remove the
sched arg as that is part of run queue itself
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nayan Deshmukh [Fri, 13 Jul 2018 09:51:13 +0000 (15:21 +0530)]
drm/scheduler: add a pointer to scheduler in the rq
This patch is in preparation for a better load balancing in
scheduler. It allows us to associate entities with the
run queues instead of binding them to a scheduler.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 12 Jul 2018 12:31:25 +0000 (14:31 +0200)]
drm/amdgpu: fix TTM move entity init order
We are initializing the entity before the scheduler is actually
initialized.
This can lead to all kind of problem, but especially NULL pointer deref
because of Nayan's scheduler work.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Fri, 25 May 2018 14:45:34 +0000 (10:45 -0400)]
drm/amd: Use newly added interrupt source defs for SOC15.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Fri, 25 May 2018 14:44:12 +0000 (10:44 -0400)]
drm/amd: Add interrupt source definitions for SOC15 v3.
Stop using 'magic numbers' when registering interrupt sources.
v2: Switch to kernel style comments.
v3:
Rebase.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Fri, 25 May 2018 14:06:52 +0000 (10:06 -0400)]
drm/amd: Use newly added interrupt source defs for VI v3.
v2: Rebase
v3: Use defines for CP_SQ and CP_ECC_ERROR interrupts.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Wed, 11 Jul 2018 21:34:35 +0000 (17:34 -0400)]
drm/amd: Add interrupt source definitions for VI v3.
Stop using 'magic numbers' when registering interrupt sources.
v2:
Clean redundant comments.
Switch to kernel style comments.
v3:
Add CP_ECC_ERROR define
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 10 Jul 2018 03:35:16 +0000 (11:35 +0800)]
drm/amd/powerplay: convert the sclk/mclk into Mhz for comparation
Convert the clocks into right Mhz unit. Otherwise, it will miss
the equal situation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 5 Jul 2018 02:44:33 +0000 (10:44 +0800)]
drm/amd/powerplay: no need to mask workable gfxoff feature for vega12
Gfxoff feature for vega12 is workable. So, there is no need to
mask it any more.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 4 Jul 2018 08:44:07 +0000 (16:44 +0800)]
drm/amd/powerplay: add vega12 SMU gfxoff support v3
Export apis for enabling/disabling SMU gfxoff support.
v2: fit the latest gfxoff support framework
v3: add feature_mask control
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 5 Jul 2018 02:30:36 +0000 (10:30 +0800)]
drm/amdgpu: reduce the idle period that RLC has to wait before request CGCG
Gfxoff feature may depends on the CGCG(on vega12, that's the case). This
change will help to enable gfxoff feature more frequently.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 5 Jul 2018 02:26:48 +0000 (10:26 +0800)]
drm/amdgpu: no touch for the reserved bit of RLC_CGTT_MGCG_OVERRIDE
On vega12, the bit0 of RLC_CGTT_MGCG_OVERRIDE is reserved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 4 Jul 2018 09:06:38 +0000 (17:06 +0800)]
drm/amdgpu: drop mmRLC_PG_CNTL clear v2
SMU owns this register so the driver should not set it
to avoid breaking gfxoff.
v2: update description
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
Reviewed-by: Huang Rui <ray.huang at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 5 Jul 2018 03:24:20 +0000 (11:24 +0800)]
drm/amdgpu: correct rlc save restore list initialization for v2_1
The save restore list initialization does not have to be pg guarded.
And for some asic(e.g. Vega12), it does not have cntl/gpm/srm lists.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 5 Jul 2018 03:17:48 +0000 (11:17 +0800)]
drm/amdgpu: init CSIB regardless of rlc version and pg status
CSIB init has no relation with rlc version and pg status. It should be
needed regardless of them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 4 Jul 2018 08:21:52 +0000 (16:21 +0800)]
drm/amdgpu: pin the csb buffer on hw init v2
Without this pin, the csb buffer will be filled with inconsistent
data after S3 resume. And that will causes gfx hang on gfxoff
exit since this csb will be executed then.
v2: fit amdgpu_bo_pin change(take one less argument)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kbuild test robot [Tue, 10 Jul 2018 17:11:08 +0000 (01:11 +0800)]
drm/amd/pp: fix semicolon.cocci warnings
drivers/gpu/drm/amd/amdgpu/../powerplay/amd_powerplay.c:1209:17-18: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes:
ea870e44415a ("drm/amd/pp: Export notify_smu_enable_pwe to display")
CC: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Wed, 4 Jul 2018 17:35:56 +0000 (13:35 -0400)]
drm/amdgpu: get VCN start to process in the dpm disabled case
Fixes:
22cc6c5e19 (drm/amdgpu: Add runtime VCN PG support)
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Wed, 4 Jul 2018 17:43:38 +0000 (13:43 -0400)]
drm/amdgpu: move cache window setup after power and clock resume
To make register read/write reliable
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Mon, 9 Jul 2018 15:59:01 +0000 (11:59 -0400)]
drm/amdgpu: Take VCN jpeg ring into account in idle work handler
VCN won't get power off when only jpeg active
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Zimmermann [Thu, 21 Jun 2018 13:21:37 +0000 (15:21 +0200)]
drm/ttm: Replace ttm_bo_unref() with ttm_bo_put()
A call to ttm_bo_unref() clears the supplied pointer to NULL, while
ttm_bo_put() does not. None of the converted call sites requires the
pointer to become NULL, so the respective assign operations has been
left out from the patch.
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Zimmermann [Thu, 21 Jun 2018 13:21:36 +0000 (15:21 +0200)]
drm/ttm: Replace ttm_bo_reference() with ttm_bo_get()
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Zimmermann [Thu, 21 Jun 2018 13:21:35 +0000 (15:21 +0200)]
drm/ttm: Introduce ttm_bo_get() and ttm_bo_put() for ref counting
The TTM buffer-object interface provides ttm_bo_reference() and
ttm_bo_unref() for managing reference counts. Replacing them with
ttm_bo_get() and ttm_bo_put() aligns the API with conventions used
throughout the Linux kernel.
The implementation of ttm_bo_unref() clears the supplied pointer
to NULL. This leads to workarounds where the caller saves the
pointer's value before de-referencing the BO. ttm_bo_put() does
not clear the supplied pointer.
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gustavo A. R. Silva [Mon, 9 Jul 2018 15:24:47 +0000 (10:24 -0500)]
drm/ttm: use swap macro in ttm_bo_handle_move_mem
Make use of the swap macro and remove unnecessary variable *tmp_mem*.
This makes the code easier to read and maintain. Also, reduces the
stack usage.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 9 Jul 2018 17:48:12 +0000 (13:48 -0400)]
drm/amd/pp: Send khz clock values to DC for smu7/8
The previous change wasn't covering smu 7 and 8 and therefore DC was
seeing wrong clock values.
This fixes an issue where the pipes seem to hang with a 4k DP and 1080p
HDMI display.
Fixes:
c3df50abc84b ("drm/amd/pp: Convert clock unit to KHz as defined")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc:rex.zhu@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Thu, 5 Jul 2018 18:49:34 +0000 (14:49 -0400)]
drm/amdgpu: Verify root PD is mapped into kernel address space (v4)
Problem: When PD/PT update made by CPU root PD was not yet mapped causing
page fault.
Fix: Verify root PD is mapped into CPU address space.
v2:
Make sure that we add the root PD to the relocated list
since then it's get mapped into CPU address space bt default
in amdgpu_vm_update_directories.
v3:
Drop change to not move kernel type BOs to evicted list.
v4:
Remove redundant bo move to relocated list.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=107065
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Fri, 29 Jun 2018 02:55:27 +0000 (22:55 -0400)]
drm/amdgpu: Present amdgpu_task_info in VM_FAULTS.
Extract and present the reposnsible process and thread when
VM_FAULT happens.
v2: Use getter and setter functions.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Fri, 29 Jun 2018 02:51:32 +0000 (22:51 -0400)]
drm/amdgpu: Add support for logging process info in amdgpu_vm.
Add process and thread names and pids and a function to extract
this info from relevant amdgpu_vm.
v2: Add documentation and fix identation.
v3: Add getter and setter functions for amdgpu_task_info.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 6 Jul 2018 13:49:05 +0000 (09:49 -0400)]
drm/amd/display: Make function pointer structs const
const to avoid hard-to-find bugs where some function overrides a
function pointer.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 6 Jul 2018 12:19:07 +0000 (14:19 +0200)]
drm/amd/display: make function tables const
It is good practice to make global function tables const to avoid
accidental override.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 6 Jul 2018 11:46:05 +0000 (13:46 +0200)]
drm/amd/display: fix invalid function table override
Otherwise we try to program hardware with the wrong watermark functions
when multiple DCE generations are installed in one system.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 5 Jul 2018 08:45:21 +0000 (16:45 +0800)]
drm/amd/pp: Convert 10KHz to KHz as variable name
The default clock unit in powerplay is 10KHz.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 5 Jul 2018 08:34:13 +0000 (16:34 +0800)]
drm/amdgpu: Add CLK IP base offset
so we can read/write the registers in CLK domain
through RREG32/WREG32_SOC15
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Mon, 25 Jun 2018 09:07:17 +0000 (11:07 +0200)]
drm/amdgpu: Reserve VM root shared fence slot for command submission (v3)
Without this, there could not be enough slots, which could trigger the
BUG_ON in reservation_object_add_shared_fence.
v2:
* Jump to the error label instead of returning directly (Jerry Zhang)
v3:
* Reserve slots for command submission after VM updates (Christian König)
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/106418
Reported-by: mikhail.v.gavrilov@gmail.com
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junwei Zhang [Tue, 26 Jun 2018 08:23:48 +0000 (16:23 +0800)]
drm/amdgpu: fix kmap error handling for bo creations
kmap happens after bo pin, so unpin is required on error
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junwei Zhang [Mon, 25 Jun 2018 05:32:24 +0000 (13:32 +0800)]
drm/amdgpu: allocate gart memory when it's required (v3)
Instead of calling gart address space on every bo pin,
allocates it on demand
v2: fix error handling
v3: drop the change on amdgpu_amdkfd_gpuvm.c, not needed.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junwei Zhang [Mon, 25 Jun 2018 04:51:14 +0000 (12:51 +0800)]
drm/amdgpu: separate gpu address from bo pin
It could be got by amdgpu_bo_gpu_offset() if need
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Tue, 10 Jul 2018 01:13:36 +0000 (11:13 +1000)]
Merge tag 'vmwgfx-next-4.19-3' of git://people.freedesktop.org/~thomash/linux into drm-next
This introduces a header update and support for multisample surfaces.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d020efb8-776d-5e8f-9d9f-122591e074d6@vmware.com
Dave Airlie [Tue, 10 Jul 2018 01:05:46 +0000 (11:05 +1000)]
Merge tag 'vmwgfx-next-4.19-2' of git://people.freedesktop.org/~thomash/linux into drm-next
A series of cleanups / reorganizations and modesetting changes that
mostly target atomic state validation.
[airlied: conflicts with SPDX stuff in amdgpu tree]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1a88485e-e509-b00e-8485-19194f074115@vmware.com
Dave Airlie [Tue, 10 Jul 2018 00:57:02 +0000 (10:57 +1000)]
Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-next
More features for 4.19:
- Use core pcie functionality rather than duplicating our own for pcie
gens and lanes
- Scheduler function naming cleanups
- More documentation
- Reworked DC/Powerplay interfaces to improve power savings
- Initial stutter mode support for RV (power feature)
- Vega12 powerplay updates
- GFXOFF fixes
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705221447.2807-1-alexander.deucher@amd.com
Dave Airlie [Tue, 10 Jul 2018 00:46:42 +0000 (10:46 +1000)]
Merge tag 'tilcdc-4.19' of https://github.com/jsarha/linux into drm-next
tilcdc pull request for v4.19
Single fix to defer probing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a10f5b43-7711-6b80-1bc3-0dfce65c628f@ti.com
Deepak Rawat [Wed, 20 Jun 2018 22:09:43 +0000 (15:09 -0700)]
drm/vmwgfx: Expose SM4_1 param to user space
A new param DRM_VMW_PARAM_SM4_1, is added for user space to determine
availability of SM4.1.
Minor version bump for SM4.1.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Deepak Rawat [Wed, 20 Jun 2018 22:24:05 +0000 (15:24 -0700)]
drm/vmwgfx: Add support for multisampling
Support for SVGA3D_SURFACE_MULTISAMPLE and surface mob size according
to sample count.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Deepak Rawat [Wed, 20 Jun 2018 21:48:35 +0000 (14:48 -0700)]
drm/vmwgfx: Add new ioctl for GB surface create and reference
New ioctls DRM_VMW_GB_SURFACE_CREATE_EXT and DRM_VMW_GB_SURFACE_REF_EXT
are added which support 64-bit wide svga device surface flags, quality
level and multisample pattern.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Deepak Rawat [Wed, 20 Jun 2018 21:25:07 +0000 (14:25 -0700)]
drm/vmwgfx: Support for SVGA3dSurfaceAllFlags in vmwgfx
Since svga device introduced new 64bit SVGA3dSurfaceAllFlags, vmwgfx
now stores the surface flags internally as SVGA3dSurfaceAllFlags.
For legacy surface define commands, only lower 32-bit is used.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Deepak Rawat [Wed, 20 Jun 2018 21:20:23 +0000 (14:20 -0700)]
drm/vmwgfx: Add support for SVGA3dCmdDefineGBSurface_v3
SVGA device added new command SVGA3dCmdDefineGBSurface_v3 which allows
64-bit SVGA3dSurfaceAllFlags. This commit adds support for
SVGA3dCmdDefineGBSurface_v3 command in vmwgfx.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Deepak Rawat [Wed, 20 Jun 2018 20:52:32 +0000 (13:52 -0700)]
drm/vmwgfx: Add SM4_1 flag
A boolean flag in device private structure to specify if the device
support SM4_1.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Neha Bhende [Tue, 19 Jun 2018 00:14:56 +0000 (17:14 -0700)]
drm/vmwgfx: Add support for SVGA3dCmdIntraSurfaceCopy command
A new command to support Intra-Surface-Copy.
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Neha Bhende [Mon, 18 Jun 2018 23:44:48 +0000 (16:44 -0700)]
drm/vmwgfx: Add CAP2 support in vmwgfx
The device exposes a new capability register. Add support for it.
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Dave Airlie [Fri, 6 Jul 2018 00:02:10 +0000 (10:02 +1000)]
Merge commit 'refs/for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next
"mali-dp driver changes for drm-next, includes the driver implementation
for writeback, improvements for power management handling in the driver
and a debugfs entry for reporting possible internal errors. Please pull
at your earliest convenience.
Boris Brezillon is also interested in this pull as he is going to change
slightly the parameter for the writeback connector's atomic_commit() and
he needs to fix the mali-dp driver in his series."
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705144408.GH15340@e110455-lin.cambridge.arm.com
Dave Airlie [Thu, 5 Jul 2018 22:52:45 +0000 (08:52 +1000)]
Merge tag 'drm-misc-next-2018-07-04' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.19:
UAPI Changes:
v3d: add fourcc modicfier for fourcc for the Broadcom UIF format (Eric Anholt)
Cross-subsystem Changes:
console/fbcon: Add support for deferred console takeover (Hans de Goede)
Core Changes:
dma-fence clean up, improvements and docs (Daniel Vetter)
add mask function for crtc, plane, encoder and connector DRM objects(Ville Syrjälä)
Driver Changes:
pl111: add Nomadik LCDC variant (Linus Walleij)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704234641.GA3981@juma
Dave Airlie [Thu, 5 Jul 2018 20:30:32 +0000 (06:30 +1000)]
Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next
A patchset worked out together with Peter Zijlstra. Ingo is OK with taking
it through the DRM tree:
This is a small fallout from a work to allow batching WW mutex locks and
unlocks.
Our Wound-Wait mutexes actually don't use the Wound-Wait algorithm but
the Wait-Die algorithm. One could perhaps rename those mutexes tree-wide to
"Wait-Die mutexes" or "Deadlock Avoidance mutexes". Another approach suggested
here is to implement also the "Wound-Wait" algorithm as a per-WW-class
choice, as it has advantages in some cases. See for example
http://www.mathcs.emory.edu/~cheung/Courses/554/Syllabus/8-recv+serial/deadlock-compare.html
Now Wound-Wait is a preemptive algorithm, and the preemption is implemented
using a lazy scheme: If a wounded transaction is about to go to sleep on
a contended WW mutex, we return -EDEADLK. That is sufficient for deadlock
prevention. Since with WW mutexes we also require the aborted transaction to
sleep waiting to lock the WW mutex it was aborted on, this choice also provides
a suitable WW mutex to sleep on. If we were to return -EDEADLK on the first
WW mutex lock after the transaction was wounded whether the WW mutex was
contended or not, the transaction might frequently be restarted without a wait,
which is far from optimal. Note also that with the lazy preemption scheme,
contrary to Wait-Die there will be no rollbacks on lock contention of locks
held by a transaction that has completed its locking sequence.
The modeset locks are then changed from Wait-Die to Wound-Wait since the
typical locking pattern of those locks very well matches the criterion for
a substantial reduction in the number of rollbacks. For reservation objects,
the benefit is more unclear at this point and they remain using Wait-Die.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703105339.4461-1-thellstrom@vmware.com
Darren Powell [Wed, 27 Jun 2018 21:05:20 +0000 (17:05 -0400)]
drm/amd: Add sphinx documentation for amd_ip_funcs
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sonny Jiang [Tue, 26 Jun 2018 19:48:34 +0000 (15:48 -0400)]
drm/amdgpu: update documentation for amdgpu_drv.c
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikita Lipski [Tue, 3 Jul 2018 13:42:51 +0000 (09:42 -0400)]
drm/amd/display: add a check for display depth validity
[why]
HDMI 2.0 fails to validate 4K@60 timing with 10 bpc
[how]
Adding a helper function that would verify if the display depth
assigned would pass a bandwidth validation.
Drop the display depth by one level till calculated pixel clk
is lower than maximum TMDS clk.
Bugzilla: https://bugs.freedesktop.org/106959
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikita Lipski [Wed, 4 Jul 2018 13:27:02 +0000 (09:27 -0400)]
drm/amd/display: adding ycbcr420 pixel encoding for hdmi
[why]
HDMI EDID's VSDB contains spectial timings for specifically
YCbCr 4:2:0 colour space. In those cases we need to verify
if the mode provided is one of the special ones has to use
YCbCr 4:2:0 pixel encoding for display info.
[how]
Verify if the mode is using specific ycbcr420 colour space with
the help of DRM helper function and assign the mode to use
ycbcr420 pixel encoding.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Darren Powell [Mon, 25 Jun 2018 23:04:03 +0000 (19:04 -0400)]
drm/amd: Remove errors from sphinx documentation
Eliminating the warnings produced by sphinx when processing the sphinx comments in
amdgpu_device.c & amdgpu_mn.c
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gustavo A. R. Silva [Wed, 4 Jul 2018 13:22:11 +0000 (08:22 -0500)]
drm/amd/display/dc/dce: Fix multiple potential integer overflows
Add suffix ULL to constant 5 and cast variables target_pix_clk_khz and
feedback_divider to uint64_t in order to avoid multiple potential integer
overflows and give the compiler complete information about the proper
arithmetic to use.
Notice that such constant and variables are used in contexts that
expect expressions of type uint64_t (64 bits, unsigned). The current
casts to uint64_t effectively apply to each expression as a whole,
but they do not prevent them from being evaluated using 32-bit
arithmetic instead of 64-bit arithmetic.
Also, once the expressions are properly evaluated using 64-bit
arithmentic, there is no need for the parentheses that enclose
them.
Addresses-Coverity-ID:
1460245 ("Unintentional integer overflow")
Addresses-Coverity-ID:
1460286 ("Unintentional integer overflow")
Addresses-Coverity-ID:
1460401 ("Unintentional integer overflow")
Fixes:
4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kees Cook [Wed, 4 Jul 2018 17:27:30 +0000 (10:27 -0700)]
drm/amd/display: Use 2-factor allocator calls
As already done treewide, switch from open-coded multiplication to
2-factor allocation helper.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 4 Jul 2018 17:47:07 +0000 (13:47 -0400)]
Revert "drm/amd/display: Fix indentation in dcn10 resource constructor"
That change was a merge gone bad.
This reverts commit
cb1d7eacb58f7d1b7d0e57b26dc02d45eada4a3c.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Wed, 4 Jul 2018 09:46:15 +0000 (12:46 +0300)]
drm/amd/display: off by one in find_irq_source_info()
The ->info[] array has DAL_IRQ_SOURCES_NUMBER elements so this condition
should be >= instead of > or we could read one element beyond the end of
the array.
Fixes:
4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 20 Jun 2018 07:05:04 +0000 (15:05 +0800)]
drm/amd/pp: Remove the same struct define in powerplay
delete the same struct define in powerplay, share the struct
with display.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Tue, 3 Jul 2018 09:17:21 +0000 (17:17 +0800)]
drm/amd/display: Fix copy error when set memory clocks
Set memory clocks same as soc clocks
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Tue, 3 Jul 2018 08:31:35 +0000 (16:31 +0800)]
drm/amd/display: Refine the implementation of dm_pp_get_funcs_rv
powerplay/dpm export all interfaces in struct amd_pm_funcs.
so call common exported interfaces instead of powerplay inner interfaces
Also not include header file hwmgr.h
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Fri, 22 Jun 2018 06:12:59 +0000 (14:12 +0800)]
drm/amd/pp: Export notify_smu_enable_pwe to display
Display can notify smu to enable pwe after gpu suspend.
It is used in case when display resumes from S3 and wants to start
audio driver by enabling pwe
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 25 Jun 2018 20:14:46 +0000 (15:14 -0500)]
drm: drop drm_pcie_get_speed_cap_mask and drm_pcie_get_max_link_width
These functions duplicated functionality which was ultimately added
to the pci core.
All users of these functions have been ported to using the newly
exposed pci functionality. These functions are no longer used,
so drop them.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 25 Jun 2018 19:37:45 +0000 (14:37 -0500)]
drm/radeon: use pcie functions for link width
This is the last user of drm_pcie_get_speed_cap_mask. Use the pci
version so we can drop drm_pcie_get_speed_cap_mask.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 25 Jun 2018 18:07:50 +0000 (13:07 -0500)]
drm/amdgpu: use pcie functions for link width and speed
Use the newly exported pci functions to get the link width
and speed rather than using the drm duplicated versions.
Also query the GPU link caps directly rather than hardcoding
them.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 25 Jun 2018 18:03:51 +0000 (13:03 -0500)]
drm/amdgpu: update amd_pcie.h to include gen4 speeds
Internal header used by the driver to specify pcie gen
speeds of the asic and chipset.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 25 Jun 2018 18:17:41 +0000 (13:17 -0500)]
PCI: Export pcie_get_speed_cap and pcie_get_width_cap
So drivers can use them. This can be used to replace
duplicate code in the drm subsystem.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 2 Jul 2018 19:35:36 +0000 (14:35 -0500)]
drm/amdgpu: switch firmware path for SI parts
Use separate firmware path for amdgpu to avoid conflicts
with radeon on SI parts.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 2 Jul 2018 19:32:28 +0000 (14:32 -0500)]
drm/amdgpu: switch firmware path for CIK parts (v2)
Use separate firmware path for amdgpu to avoid conflicts
with radeon on CIK parts.
v2: squash in logic simplification (Alex)
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicolai Hähnle [Fri, 29 Jun 2018 11:23:25 +0000 (13:23 +0200)]
drm/amdgpu: fix user fence write race condition
The buffer object backing the user fence is reserved using the non-user
fence, i.e., as soon as the non-user fence is signaled, the user fence
buffer object can be moved or even destroyed.
Therefore, emit the user fence first.
Both fences have the same cache invalidation behavior, so this should
have no user-visible effect.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 20 Jun 2018 05:36:58 +0000 (13:36 +0800)]
drm/amd/pp: Remove duplicate code in vega12_hwmgr.c
use smu_helper function smu_set_watermarks_for_clocks_ranges
in vega12_set_watermarks_for_clocks_ranges.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Fri, 22 Jun 2018 10:26:52 +0000 (18:26 +0800)]
drm/amd/pp: Refine the interface exported to display
use void * as function parameter type in order for extension.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>