vhost-user-blk: delay vhost_user_blk_disconnect

A socket write during vhost-user communication may trigger a disconnect
event, calling vhost_user_blk_disconnect() and clearing all the
vhost_dev structures holding data that vhost-user functions expect to
remain valid to roll back initialization correctly. Delay the cleanup to
keep vhost_dev structure valid.
There are two possible states to handle:
1. RUN_STATE_PRELAUNCH: skip bh oneshot call and perform disconnect in
the caller routine.
2. RUN_STATE_RUNNING: delay by using bh

BH changes are based on the similar changes for the vhost-user-net
device:
  commit e7c83a885f865128ae3cf1946f8cb538b63cbfba
  "vhost-user: delay vhost_user_stop"

Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Message-Id: <69b73b94dcd066065595266c852810e0863a0895.1590396396.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>

char-socket: return -1 in case of disconnect during tcp_chr_write

During testing of the vhost-user-blk reconnect functionality the qemu
SIGSEGV was triggered:
 start qemu as:
 x86_64-softmmu/qemu-system-x86_64 -m 1024M -M q35 \
   -object memory-backend-file,id=ram-node0,size=1024M,mem-path=/dev/shm/qemu,share=on \
   -numa node,cpus=0,memdev=ram-node0 \
   -chardev socket,id=chardev0,path=./vhost.sock,noserver,reconnect=1 \
   -device vhost-user-blk-pci,chardev=chardev0,num-queues=4 --enable-kvm
 start vhost-user-blk daemon:
 ./vhost-user-blk -s ./vhost.sock -b test-img.raw

If vhost-user-blk will be killed during the vhost initialization
process, for instance after getting VHOST_SET_VRING_CALL command, then
QEMU will fail with the following backtrace:

Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x00005555559272bb in vhost_user_read (dev=0x7fffef2d53e0, msg=0x7fffffffd5b0)
    at ./hw/virtio/vhost-user.c:260
260         CharBackend *chr = u->user->chr;

 #0  0x00005555559272bb in vhost_user_read (dev=0x7fffef2d53e0, msg=0x7fffffffd5b0)
    at ./hw/virtio/vhost-user.c:260
 #1  0x000055555592acb8 in vhost_user_get_config (dev=0x7fffef2d53e0, config=0x7fffef2d5394 "", config_len=60)
    at ./hw/virtio/vhost-user.c:1645
 #2  0x0000555555925525 in vhost_dev_get_config (hdev=0x7fffef2d53e0, config=0x7fffef2d5394 "", config_len=60)
    at ./hw/virtio/vhost.c:1490
 #3  0x00005555558cc46b in vhost_user_blk_device_realize (dev=0x7fffef2d51a0, errp=0x7fffffffd8f0)
    at ./hw/block/vhost-user-blk.c:429
 #4  0x0000555555920090 in virtio_device_realize (dev=0x7fffef2d51a0, errp=0x7fffffffd948)
    at ./hw/virtio/virtio.c:3615
 #5  0x0000555555a9779c in device_set_realized (obj=0x7fffef2d51a0, value=true, errp=0x7fffffffdb88)
    at ./hw/core/qdev.c:891
 ...

The problem is that vhost_user_write doesn't get an error after
disconnect and try to call vhost_user_read(). The tcp_chr_write()
routine should return -1 in case of disconnect. Indicate the EIO error
if this routine is called in the disconnected state.

Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <aeb7806bfc945faadf09f64dcfa30f59de3ac053.1590396396.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

hw/pci-host: Use the IEC binary prefix definitions

IEC binary prefixes ease code review: the unit is explicit.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200601142930.29408-6-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/pci/pci_bridge: Use the IEC binary prefix definitions

IEC binary prefixes ease code review: the unit is explicit.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200601142930.29408-5-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/pci/pci_bridge: Correct pci_bridge_io memory region size

memory_region_set_size() handle the 16 Exabytes limit by
special-casing the UINT64_MAX value. This is not a problem
for the 32-bit maximum, 4 GiB.
By using the UINT32_MAX value, the pci_bridge_io MemoryRegion
ends up missing 1 byte:

  (qemu) info mtree
  memory-region: pci_bridge_io
    0000000000000000-00000000fffffffe (prio 0, i/o): pci_bridge_io
      0000000000000060-0000000000000060 (prio 0, i/o): i8042-data
      0000000000000064-0000000000000064 (prio 0, i/o): i8042-cmd
      00000000000001ce-00000000000001d1 (prio 0, i/o): vbe
      0000000000000378-000000000000037f (prio 0, i/o): parallel
      00000000000003b4-00000000000003b5 (prio 0, i/o): vga
      ...

Fix by using the correct value. We now have:

  memory-region: pci_bridge_io
    0000000000000000-00000000ffffffff (prio 0, i/o): pci_bridge_io
      0000000000000060-0000000000000060 (prio 0, i/o): i8042-data
      0000000000000064-0000000000000064 (prio 0, i/o): i8042-cmd
      ...

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200601142930.29408-4-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

hw/pci-host/prep: Correct RAVEN bus bridge memory region size

memory_region_set_size() handle the 16 Exabytes limit by
special-casing the UINT64_MAX value. This is not a problem
for the 32-bit maximum, 4 GiB.
By using the UINT32_MAX value, the bm-raven MemoryRegion
ends up missing 1 byte:

  $ qemu-system-ppc -M prep -S -monitor stdio -usb
  memory-region: bm-raven
    0000000000000000-00000000fffffffe (prio 0, i/o): bm-raven
      0000000000000000-000000003effffff (prio 0, i/o): alias bm-pci-memory @pci-memory 0000000000000000-000000003effffff
      0000000080000000-00000000ffffffff (prio 0, i/o): alias bm-system @system 0000000000000000-000000007fffffff

Fix by using the correct value. We now have:

  memory-region: bm-raven
    0000000000000000-00000000ffffffff (prio 0, i/o): bm-raven
      0000000000000000-000000003effffff (prio 0, i/o): alias bm-pci-memory @pci-memory 0000000000000000-000000003effffff
      0000000080000000-00000000ffffffff (prio 0, i/o): alias bm-system @system 0000000000000000-000000007fffffff

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200601142930.29408-3-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

pci: assert configuration access is within bounds

While accessing PCI configuration bytes, assert that
'address + len' is within PCI configuration space.

Generally it is within bounds. This is more of a defensive
assert, in case a buggy device was to send 'address' which
may go out of bounds.

Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20200604113525.58898-1-ppandit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

hw/pci/pcie: Move hot plug capability check to pre_plug callback

Check for hot plug capability earlier to avoid removing devices attached
during the initialization process.

Run qemu with an unattached drive:
  -drive file=$FILE,if=none,id=drive0 \
  -device pcie-root-port,id=rp0,slot=3,bus=pcie.0,hotplug=off
Hotplug a block device:
  device_add virtio-blk-pci,id=blk0,drive=drive0,bus=rp0
If hotplug fails on plug_cb, drive0 will be deleted.

Fixes: 0501e1aa1d32a6 ("hw/pci/pcie: Forbid hot-plug if it's disabled on the slot")

Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20200604125947.881210-1-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MAINTAINERS: Fix the classification of bios-tables-test-allowed-diff.h

The file tests/qtest/bios-tables-test-allowed-diff.h is currently only
assigned to the qtest section according MAINTAINERS. However, this file
normally only gets updated when the ACPI tables changed - something the
qtest maintainers don't have much clue of. Thus this file should rather
be assigned to the ACPI maintainers instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200607052022.12222-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-balloon: Provide an interface for free page reporting

Add support for free page reporting. The idea is to function very similar
to how the balloon works in that we basically end up madvising the page as
not being used. However we don't really need to bother with any deflate
type logic since the page will be faulted back into the guest when it is
read or written to.

This provides a new way of letting the guest proactively report free
pages to the hypervisor, so the hypervisor can reuse them. In contrast to
inflate/deflate that is triggered via the hypervisor explicitly.

Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Message-Id: <20200527041407.12700.73735.stgit@localhost.localdomain>

virtio-balloon: Implement support for page poison reporting feature

We need to make certain to advertise support for page poison reporting if
we want to actually get data on if the guest will be poisoning pages.

Add a value for reporting the poison value being used if page poisoning is
enabled in the guest. With this we can determine if we will need to skip
free page reporting when it is enabled in the future.

The value currently has no impact on existing balloon interfaces. In the
case of existing balloon interfaces the onus is on the guest driver to
reapply whatever poison is in place.

When we add free page reporting the poison value is used to determine if
we can perform in-place page reporting. The expectation is that a reported
page will already contain the value specified by the poison, and the
reporting of the page should not change that value.

Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Message-Id: <20200527041400.12700.33251.stgit@localhost.localdomain>

virtio-balloon: unref the iothread when unrealizing

We took a reference when realizing, so let's drop that reference when
unrealizing.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Cc: qemu-stable@nongnu.org
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200520100439.19872-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-balloon: fix free page hinting check on unrealize

Checking against guest features is wrong. We allocated data structures
based on host features. We can rely on "free_page_bh" as an indicator
whether to un-do stuff instead.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Cc: qemu-stable@nongnu.org
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200520100439.19872-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-balloon: fix free page hinting without an iothread

In case we don't have an iothread, we mark the feature as abscent but
still add the queue. 'free_page_bh' remains set to NULL.

qemu-system-i386 \
        -M microvm \
        -nographic \
        -device virtio-balloon-device,free-page-hint=true \
        -nographic \
        -display none \
        -monitor none \
        -serial none \
        -qtest stdio

Doing a "write 0xc0000e30 0x24
0x030000000300000003000000030000000300000003000000030000000300000003000000"

We will trigger a SEGFAULT. Let's move the check and bail out.

While at it, move the static initializations to instance_init().
free_page_report_status and block_iothread are implicitly set to the
right values (0/false) already, so drop the initialization.

Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Cc: qemu-stable@nongnu.org
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200520100439.19872-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

bios-tables-test: Generate reference tables for Q35/TPM-TIS

TPM2, DSDT tables were generated using
tests/data/acpi/rebuild-expected-aml.sh

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20200609125409.24179-6-eric.auger@redhat.com>

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

bios-tables-test: Add Q35/TPM-TIS test

Test tables specific to the TPM-TIS instantiation.
The TPM2 is added in the framework. Also the DSDT
is updated with the TPM. The new function should be
be usable for CRB as well, later one.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200609125409.24179-5-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests: tpm-emu: Remove assert on TPM2_ST_NO_SESSIONS

bios-tables-test executes SeaBIOS. Indeed FW is needed to
fetch tables from QEMU and put them into the guest RAM. Also
the FW patches cross table pointers. At some point, SeaBIOS
ends up calling the TPM2_CC_HierarchyControl command with
TPM2_ST_SESSIONS tag, most probably steming from
tpm_set_failure/tpm20_hierarchycontrol SeaBIOS call path.
This causes an assert() in the qtest tpm emulation code.

As the goal here is not to boot SeaBIOS completely but just
let it grab the ACPI tables and consolidate them, let's just
remove the assert().

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200609125409.24179-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests/acpi: Add void tables for Q35/TPM-TIS bios-tables-test

Add placeholders for TPM and DSDT reference tables for
Q35 TPM-TIS tests and ignore them for the time being.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200609125409.24179-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

test/tpm-emu: include sockets and channel headers in tpm-emu header

Include sockets and channel headers to that the header is
self-contained.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20200609125409.24179-2-eric.auger@redhat.com>

arm/acpi: TPM2 ACPI table support

Add a TPM2 ACPI table if a TPM2.0 sysbus device has been
dynamically instantiated.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200601095737.32671-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: Move build_tpm2() in the generic part

We plan to build the TPM2 table on ARM too. In order to reuse the
generation code, let's move build_tpm2() to aml-build.c.

No change in the implementation.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200601095737.32671-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: Convert build_tpm2() to build_append* API

In preparation of its move to the generic acpi code,
let's convert build_tpm2() to use build_append API. This
latter now is prefered in place of direct ACPI struct field
settings with manual endianness conversion.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200601095737.32671-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: tpm: Do not build TCPA table for TPM 2

Do not build a TCPA table for TPM 2 anymore but create the log area when
building the TPM2 table. The TCPA table is only needed for TPM 1.2.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>

tests/acpi: update DSDT expected files

Update DSDT after CRS changes and _STA methods dropped.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: move aml builder code for parallel device

Also adds support for multiple LPT devices.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200515150421.25479-8-kraxel@redhat.com>

acpi: parallel: don't use _STA method

The _STA method dates back to the days where we had a static DSDT.  The
device is listed in the DSDT table unconditionally and the _STA method
checks a bit in the isa bridge pci config space to figure whenever a
given is isa device is present or not, then evaluates to 0x0f (present)
or 0x00 (absent).

These days the DSDT is generated by qemu anyway, so if a device is not
present we can simply drop it from the DSDT instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200515150421.25479-7-kraxel@redhat.com>

acpi: move aml builder code for serial device

The code uses the isa_serial_io array to figure what the device uid is.
Side effect is that acpi antries are not limited to port 1+2 any more,
we'll also get entries for ports 3+4.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200515150421.25479-6-kraxel@redhat.com>

acpi: serial: don't use _STA method

The _STA method dates back to the days where we had a static DSDT.  The
device is listed in the DSDT table unconditionally and the _STA method
checks a bit in the isa bridge pci config space to figure whenever a
given is isa device is present or not, then evaluates to 0x0f (present)
or 0x00 (absent).

These days the DSDT is generated by qemu anyway, so if a device is not
present we can simply drop it from the DSDT instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200515150421.25479-5-kraxel@redhat.com>

acpi: rtc: use a single crs range

Use a single io range for _CRS instead of two,
following what real hardware does.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200515150421.25479-4-kraxel@redhat.com>

acpi: move aml builder code for rtc device

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200515150421.25479-3-kraxel@redhat.com>

qtest: allow DSDT acpi table changes

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200515150421.25479-2-kraxel@redhat.com>

tests/acpi: update expected SRAT files

Update expected SRAT files for the change to account for NVDIMM NUMA
nodes in the SRAT.

AML diffs:

tests/data/acpi/pc/SRAT.dimmpxm:
Message-Id: <20200606000911.9896-4-vishal.l.verma@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

hw/acpi/nvdimm: add a helper to augment SRAT generation

NVDIMMs can belong to their own proximity domains, as described by the
NFIT. In such cases, the SRAT needs to have Memory Affinity structures
in the SRAT for these NVDIMMs, otherwise Linux doesn't populate node
data structures properly during NUMA initialization. See the following
for an example failure case.

https://lore.kernel.org/linux-nvdimm/20200416225438.15208-1-vishal.l.verma@intel.com/

Introduce a new helper, nvdimm_build_srat(), and call it for both the
i386 and arm versions of 'build_srat()' to augment the SRAT with
memory affinity information for NVDIMMs.

The relevant command line options to exercise this are below. Nodes 0-1
contain CPUs and regular memory, and nodes 2-3 are the NVDIMM address
space.

    -object memory-backend-ram,id=mem0,size=2048M
    -numa node,nodeid=0,memdev=mem0,
    -numa cpu,node-id=0,socket-id=0
    -object memory-backend-ram,id=mem1,size=2048M
    -numa node,nodeid=1,memdev=mem1,
    -numa cpu,node-id=1,socket-id=1
    -numa node,nodeid=2,
    -object memory-backend-file,id=nvmem0,share,mem-path=nvdimm-0,size=16384M,align=1G
    -device nvdimm,memdev=nvmem0,id=nv0,label-size=2M,node=2
    -numa node,nodeid=3,
    -object memory-backend-file,id=nvmem1,share,mem-path=nvdimm-1,size=16384M,align=1G
    -device nvdimm,memdev=nvmem1,id=nv1,label-size=2M,node=3

Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Message-Id: <20200606000911.9896-3-vishal.l.verma@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

diffs-allowed: add the SRAT AML to diffs-allowed

In anticipation of a change to the SRAT generation in qemu, add the AML
file to diffs-allowed.

Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Message-Id: <20200606000911.9896-2-vishal.l.verma@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

msix: allow qword MSI-X table accesses

PCI spec says:

For all accesses to MSI-X Table and MSI-X PBA fields, software must use
aligned full DWORD or aligned full QWORD transactions; otherwise, the
result is undefined.

However, since MSI-X was converted to use memory API, QEMU
started blocking qword transactions, only allowing DWORD
ones. Guests do not seem to use QWORD accesses, but let's
be spec compliant.

Fixes: 95524ae8dc8f ("msix: convert to memory API")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.1-pull-request' into staging

linux-user pull request 20200605-v2

Implement F_OFD_ fcntl() command, /proc/cpuinfo for hppa
Fix socket(), prnctl() error codes, underflow in target_mremap,
    epoll_create() strace, oldumount for alpha
User-mode build dependencies improvement

# gpg: Signature made Sat 06 Jun 2020 14:15:36 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-5.1-pull-request:
  stubs: Restrict ui/win32-kbd-hook to system-mode
  hw/core: Restrict CpuClass::get_crash_info() to system-mode
  target/s390x: Restrict CpuClass::get_crash_info() to system-mode
  target/i386: Restrict CpuClass::get_crash_info() to system-mode
  arch_init: Remove unused 'qapi-commands-misc.h' include
  exec: Assert CPU migration is not used on user-only build
  target/riscv/cpu: Restrict CPU migration to system-mode
  stubs/Makefile: Reduce the user-mode object list
  util/Makefile: Reduce the user-mode object list
  tests/Makefile: Restrict some softmmu-only tests
  tests/Makefile: Only display TCG-related tests when TCG is available
  configure: Avoid building TCG when not needed
  Makefile: Only build virtiofsd if system-mode is enabled
  linux-user: implement OFD locks
  linux-user/mmap.c: fix integer underflow in target_mremap
  linux-user/strace.list: fix epoll_create{,1} -strace output
  linux-user: Add support for /proc/cpuinfo on hppa platform
  linux-user: return target error codes for socket() and prctl()
  linux-user, alpha: fix oldumount syscall

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200605' into staging

target-arm queue:
 hw/ssi/imx_spi: Handle tx burst lengths other than 8 correctly
 hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask()
 hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()
 target/arm: Convert crypto insns to gvec
 hw/adc/stm32f2xx_adc: Correct memory region size and access size
 tests/acceptance: Add a boot test for the xlnx-versal-virt machine
 docs/system: Document Aspeed boards
 raspi: Add model of the USB controller
 target/arm: Convert 2-reg-and-shift and 1-reg-imm Neon insns to decodetree

# gpg: Signature made Fri 05 Jun 2020 17:48:39 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200605: (29 commits)
  target/arm: Convert Neon one-register-and-immediate insns to decodetree
  target/arm: Convert VCVT fixed-point ops to decodetree
  target/arm: Convert Neon VSHLL, VMOVL to decodetree
  target/arm: Convert Neon narrowing shifts with op==9 to decodetree
  target/arm: Convert Neon narrowing shifts with op==8 to decodetree
  target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree
  target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree
  target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree
  target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree
  raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host
  wire in the dwc-hsotg (dwc2) USB host controller emulation
  usb: add short-packet handling to usb-storage driver
  dwc-hsotg (dwc2) USB host controller emulation
  dwc-hsotg (dwc2) USB host controller state definitions
  dwc-hsotg (dwc2) USB host controller register definitions
  raspi: add BCM2835 SOC MPHI emulation
  docs/system: Document Aspeed boards
  tests/acceptance: Add a boot test for the xlnx-versal-virt machine
  hw/adc/stm32f2xx_adc: Correct memory region size and access size
  target/arm: Split helper_crypto_sm3tt
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

stubs: Restrict ui/win32-kbd-hook to system-mode

In Makefile.objs, the ui/ directory is restricted to system-mode:

 43 ifeq ($(CONFIG_SOFTMMU),y)
 ...
 65 common-obj-y += ui/
 66 common-obj-m += ui/
 ...
 82 endif # CONFIG_SOFTMMU

Restrict the ui/ stub added in commit 2df9f5718df to only build
it for system-mode emulation.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200522172510.25784-14-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/core: Restrict CpuClass::get_crash_info() to system-mode

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-13-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/s390x: Restrict CpuClass::get_crash_info() to system-mode

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-12-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/i386: Restrict CpuClass::get_crash_info() to system-mode

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-11-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

arch_init: Remove unused 'qapi-commands-misc.h' include

Commit ffaee83bcb2 moved qmp_query_target but forgot to remove
this include.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-10-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

exec: Assert CPU migration is not used on user-only build

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-9-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/riscv/cpu: Restrict CPU migration to system-mode

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-8-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

stubs/Makefile: Reduce the user-mode object list

These stubs are not required when configured with --disable-system.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

util/Makefile: Reduce the user-mode object list

These objects are not required when configured with --disable-system.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

tests/Makefile: Restrict some softmmu-only tests

In the next commit we are going to remove some objects from the
util-obj-y variable (objects which are not used by user-mode,
when configured with --disable-system).
Then some system-mode tests are going to fail, due to the missing
objects:

  $ make check-unit -k
    LINK    tests/test-iov
  /usr/bin/ld: tests/test-iov.o: in function `iov_from_buf':
  include/qemu/iov.h:49: undefined reference to `iov_from_buf_full'
  make: *** [rules.mak:124: tests/test-iov] Error 1
    LINK    tests/test-timed-average
  /usr/bin/ld: tests/test-timed-average.o: in function `account':
  tests/test-timed-average.c:27: undefined reference to `timed_average_account'
  make: *** [rules.mak:124: tests/test-timed-average] Error 1
    LINK    tests/test-util-filemonitor
  /usr/bin/ld: tests/test-util-filemonitor.o: in function `qemu_file_monitor_test_event_loop':
  tests/test-util-filemonitor.c:83: undefined reference to `main_loop_wait'
  make: *** [rules.mak:124: tests/test-util-filemonitor] Error 1
    LINK    tests/test-util-sockets
  /usr/bin/ld: tests/test-util-sockets.o: in function `test_socket_fd_pass_name_good':
  tests/test-util-sockets.c:91: undefined reference to `socket_connect'
  make: *** [rules.mak:124: tests/test-util-sockets] Error 1
    LINK    tests/test-base64
  /usr/bin/ld: tests/test-base64.o: in function `test_base64_good':
  tests/test-base64.c:35: undefined reference to `qbase64_decode'
  collect2: error: ld returned 1 exit status
  make: *** [rules.mak:124: tests/test-base64] Error 1
    LINK    tests/test-bufferiszero
  /usr/bin/ld: tests/test-bufferiszero.o: in function `test_1':
  tests/test-bufferiszero.c:31: undefined reference to `buffer_is_zero'
  make: *** [rules.mak:124: tests/test-bufferiszero] Error 1
  make: Target 'check-unit' not remade because of errors.

Instead, restrict these tests to system-mode, by using the
$(CONFIG_SOFTMMU) variable.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

tests/Makefile: Only display TCG-related tests when TCG is available

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

configure: Avoid building TCG when not needed

Avoid building TCG when building only tools:

  ./configure --enable-tools --disable-system --disable-user

This saves us from running the soft-float tests enabled since
commit 76170102508.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Makefile: Only build virtiofsd if system-mode is enabled

Do not build the virtiofsd helper when configured with
--disable-system.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: implement OFD locks

Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvm7dx0cun3.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/mmap.c: fix integer underflow in target_mremap

Fixes: https://bugs.launchpad.net/bugs/1876373

This code path in mmap occurs when a page size is decreased with mremap.  When a section of pages is shrunk, qemu calls mmap_reserve on the pages that were released.  However, it has the diff operation reversed, subtracting the larger old_size from the smaller new_size.  Instead, it should be subtracting the smaller new_size from the larger old_size.  You can also see in the previous line of the change that this mmap_reserve call only occurs when old_size > new_size.

Bug: https://bugs.launchpad.net/qemu/+bug/1876373
Signed-off-by: Jonathan Marler <johnnymarler@gmail.com>
Reviewded-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200502161225.14346-1-johnnymarler@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user/strace.list: fix epoll_create{,1} -strace output

Fix syscall name and parameters priinter.

Before the change:

```
$ alpha-linux-user/qemu-alpha -strace -L /usr/alpha-unknown-linux-gnu/ /tmp/a
...
1274697 %s(%d)(2097152,274903156744,274903156760,274905840712,274877908880,274903235616) = 3
1274697 exit_group(0)
```

After the change:

```
$ alpha-linux-user/qemu-alpha -strace -L /usr/alpha-unknown-linux-gnu/ /tmp/a
...
1273719 epoll_create1(2097152) = 3
1273719 exit_group(0)
```

Fixes: 9cbc0578cb6 ("Improve output of various syscalls")
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Riku Voipio <riku.voipio@iki.fi>
CC: Laurent Vivier <laurent@vivier.eu>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200416175957.1274882-1-slyfox@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: Add support for /proc/cpuinfo on hppa platform

Provide our own /proc/cpuinfo file for the hppa (parisc) platform.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200424210648.GA26715@ls3530.fritz.box>
[lv: s/an/our/ and add TARGET_HPPA to guard is_proc()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20200605' into staging

s390x update:
- enhance s390x documentation
- allow ORBs without prefetch specified for vfio-ccw
- various cleanups and enhancements

# gpg: Signature made Fri 05 Jun 2020 16:32:43 BST
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [marginal]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [marginal]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20200605:
  target/s390x: Restrict system-mode declarations
  target/s390x/helper: Clean ifdef'ry
  target/s390x: Only compile decode_basedisp() on system-mode
  MAINTAINERS: add Thomas as additional s390x maintainer
  docs/s390x: document vfio-ccw
  vfio-ccw: allow non-prefetch ORBs
  docs/s390x: document 3270
  docs/s390x: document the virtual css
  s390x: pv: Fix KVM_PV_PREP_RESET command wrapper name
  s390x/kvm: help valgrind in several places

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert Neon one-register-and-immediate insns to decodetree

Convert the insns in the one-register-and-immediate group to decodetree.

In the new decode, our asimd_imm_const() function returns a 64-bit value
rather than a 32-bit one, which means we don't need to treat cmode=14 op=1
as a special case in the decoder (it is the only encoding where the two
halves of the 64-bit value are different).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-10-peter.maydell@linaro.org

target/arm: Convert VCVT fixed-point ops to decodetree

Convert the VCVT fixed-point conversion operations in the
Neon 2-regs-and-shift group to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-9-peter.maydell@linaro.org

target/arm: Convert Neon VSHLL, VMOVL to decodetree

Convert the VSHLL and VMOVL insns from the 2-reg-shift group
to decodetree. Since the loop always has two passes, we unroll
it to avoid the awkward reassignment of one TCGv to another.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-8-peter.maydell@linaro.org

target/arm: Convert Neon narrowing shifts with op==9 to decodetree

Convert the remaining Neon narrowing shifts to decodetree:
  * VQSHRN
  * VQRSHRN

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-7-peter.maydell@linaro.org

target/arm: Convert Neon narrowing shifts with op==8 to decodetree

Convert the Neon narrowing shifts where op==8 to decodetree:
 * VSHRN
 * VRSHRN
 * VQSHRUN
 * VQRSHRUN

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-6-peter.maydell@linaro.org

target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree

Convert the VQSHLU and QVSHL 2-reg-shift insns to decodetree.
These are the last of the simple shift-by-immediate insns.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-5-peter.maydell@linaro.org

target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree

Convert the VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree.
(These are the last instructions in the group that are vectorized;
the rest all require looping over each element.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-4-peter.maydell@linaro.org

target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree

Convert the VSHR 2-reg-shift insns to decodetree.

Note that unlike the legacy decoder, we present the right shift
amount to the trans_ function as a positive integer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-3-peter.maydell@linaro.org

target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree

Convert the VSHL and VSLI insns from the Neon 2-registers-and-a-shift
group to decodetree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200522145520.6778-2-peter.maydell@linaro.org

raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host

Add a check for functional dwc-hsotg (dwc2) USB host emulation to
the Raspi 2 acceptance test

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Message-id: 20200520235349.21215-8-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

wire in the dwc-hsotg (dwc2) USB host controller emulation

Wire the dwc-hsotg (dwc2) emulation into Qemu

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Message-id: 20200520235349.21215-7-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

usb: add short-packet handling to usb-storage driver

The dwc-hsotg (dwc2) USB host depends on a short packet to
indicate the end of an IN transfer. The usb-storage driver
currently doesn't provide this, so fix it.

I have tested this change rather extensively using a PC
emulation with xhci, ehci, and uhci controllers, and have
not observed any regressions.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-6-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

dwc-hsotg (dwc2) USB host controller emulation

Add the dwc-hsotg (dwc2) USB host controller emulation code.
Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c.

Note that to use this with the dwc-otg driver in the Raspbian
kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" on
the kernel command line.

Emulation of slave mode and of descriptor-DMA mode has not been
implemented yet. These modes are seldom used.

I have used some on-line sources of information while developing
this emulation, including:

http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf
which has a pretty complete description of the controller starting
on page 370.

https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf
which has a description of the controller registers starting on
page 130.

Thanks to Felippe Mathieu-Daude for providing a cleaner method
of implementing the memory regions for the controller registers.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-5-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

dwc-hsotg (dwc2) USB host controller state definitions

Add the dwc-hsotg (dwc2) USB host controller state definitions.
Mostly based on hw/usb/hcd-ehci.h.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-4-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

dwc-hsotg (dwc2) USB host controller register definitions

Import the dwc-hsotg (dwc2) register definitions file from the
Linux kernel. This is a copy of drivers/usb/dwc2/hw.h from the
mainline Linux kernel, the only changes being to the header, and
two instances of 'u32' changed to 'uint32_t' to allow it to
compile. Checkpatch throws a boatload of errors due to the tab
indentation, but I would rather import it as-is than reformat it.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-3-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

raspi: add BCM2835 SOC MPHI emulation

Add BCM2835 SOC MPHI (Message-based Parallel Host Interface)
emulation. It is very basic, only providing the FIQ interrupt
needed to allow the dwc-otg USB host controller driver in the
Raspbian kernel to function.

Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200520235349.21215-2-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs/system: Document Aspeed boards

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200602135050.593692-1-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/acceptance: Add a boot test for the xlnx-versal-virt machine

As described by Edgar here:

 https://www.mail-archive.com/qemu-devel@nongnu.org/msg605124.html

we can use the Ubuntu kernel for testing the xlnx-versal-virt machine.
So let's add a boot test for this now.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200525141237.15243-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/adc/stm32f2xx_adc: Correct memory region size and access size

The ADC region size is 256B, split as:
 - [0x00 - 0x4f] defined
 - [0x50 - 0xff] reserved

All registers are 32-bit (thus when the datasheet mentions the
last defined register is 0x4c, it means its address range is
0x4c .. 0x4f.

This model implementation is also 32-bit. Set MemoryRegionOps
'impl' fields.

See:
  'RM0033 Reference manual Rev 8', Table 10.13.18 "ADC register map".

Reported-by: Seth Kintigh <skintigh@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200603055915.17678-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Split helper_crypto_sm3tt

Rather than passing an opcode to a helper, fully decode the
operation at translate time.  Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Split helper_crypto_sha1_3reg

Rather than passing an opcode to a helper, fully decode the
operation at translate time.  Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert sha1 and sha256 to gvec helpers

Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared.  Which fixes
an existing bug vs SVE.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert sha512 and sm3 to gvec helpers

Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared.  Which fixes
an existing bug vs SVE.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert rax1 to gvec helpers

With this conversion, we will be able to use the same helpers
with sve.  This also fixes a bug in which we failed to clear
the high bits of the SVE register after an AdvSIMD operation.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Convert aes and sm4 to gvec helpers

With this conversion, we will be able to use the same helpers
with sve.  In particular, pass 3 vector parameters for the
3-operand operations; for advsimd the destination register
is also an input.

This also fixes a bug in which we failed to clear the high bits
of the SVE register after an AdvSIMD operation.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/pxa2xx: Replace printf() call by qemu_log_mask()

Replace printf() calls by qemu_log_mask(), which is disabled
by default. This avoid flooding the terminal when fuzzing the
device.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200525114123.21317-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask()

hw_error() calls exit(). This a bit overkill when we can log
the accesses as unimplemented or guest error.

When fuzzing the devices, we don't want the whole process to
exit. Replace some hw_error() calls by qemu_log_mask()
(missed in commit 5a0001ec7e).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200525114123.21317-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/ssi/imx_spi: Removed unnecessary cast of rx data received from slave

When inserting the value retrieved (rx) from the spi slave, rx is pushed to
rx_fifo after being cast to uint8_t. rx_fifo is a fifo32, and the rx
register the driver uses is also 32 bit. This zeroes the 24 most
significant bits of rx. This proved problematic with devices that expect to
use the whole 32 bits of the rx register.

Signed-off-by: Eden Mikitas <e.mikitas@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/ssi/imx_spi: changed while statement to prevent underflow

The while statement in question only checked if tx_burst is not 0.
tx_burst is a signed int, which is assigned the value put by the
guest driver in ECSPI_CONREG. The burst length can be anywhere
between 1 and 4096, and since tx_burst is always decremented by 8
it could possibly underflow, causing an infinite loop.

Signed-off-by: Eden Mikitas <e.mikitas@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/s390x: Restrict system-mode declarations

As these declarations are restricted to !CONFIG_USER_ONLY in
helper.c, only declare them when system-mode emulation is used.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200526172427.17460-8-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x/helper: Clean ifdef'ry

All this code is guarded checking CONFIG_USER_ONLY definition.
Drop the duplicated checks.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200526172427.17460-7-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

target/s390x: Only compile decode_basedisp() on system-mode

The decode_basedisp*() methods are only used in ioinst.c,
which is only build in system-mode emulation.

I/O instructions are privileged, and other S instructions
are decoded elsewhere.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200526172427.17460-6-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

MAINTAINERS: add Thomas as additional s390x maintainer

...because two people are better than one.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Message-Id: <20200525155855.225564-1-cohuck@redhat.com>

docs/s390x: document vfio-ccw

Add a basic example for passing a dasd via vfio-ccw.

Message-Id: <20200518075522.97643-1-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

vfio-ccw: allow non-prefetch ORBs

Remove the explicit prefetch check when using vfio-ccw devices.
This check does not trigger in practice as all Linux channel programs
are intended to use prefetch.

Newer Linux kernel versions do not require to force the PFCH flag with
vfio-ccw devices anymore.

Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20200512181535.18630-2-jrossi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

docs/s390x: document 3270

Add some basic info how to use 3270 devices.

Message-Id: <20200515151518.83950-3-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

docs/s390x: document the virtual css

Add some hints about "devno" rules.

Message-Id: <20200515151518.83950-2-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x: pv: Fix KVM_PV_PREP_RESET command wrapper name

s390_pv_perf_clear_reset() is not a very helpful name since that
function needs to be called for a normal and a clear reset via
diag308.

Let's instead name it s390_pv_prep_reset() which reflects the purpose
of the function a bit better.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200505124159.24099-1-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

s390x/kvm: help valgrind in several places

We need some little help in the code to reduce the valgrind noise.
This patch does this with some designated initializers for the cpu
model features and subfunctions.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200429074201.100924-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200605-pull-request' into staging

vga: ati security fix, cirrus cleanup.

# gpg: Signature made Fri 05 Jun 2020 12:27:13 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20200605-pull-request:
  hw/display/cirrus_vga: Fix code mis-indentation
  ati-vga: check mm_index before recursive call (CVE-2020-13800)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Fri 05 Jun 2020 10:47:27 BST
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  block: Factor out bdrv_run_co()
  exec: Rename qemu_ram_writeback() as qemu_ram_msync()
  hw/block: Let the NVMe emulated device be target-agnostic
  memory: Extract memory_region_msync() from memory_region_writeback()
  memory: Rename memory_region_do_writeback -> memory_region_writeback
  fuzz: run the main-loop in fork-server process
  fuzz: add mangled object name to linker script
  fuzz: fix typo in i440fx-qtest-reboot arguments
  fuzz: add datadir for oss-fuzz compatability
  io_uring: use io_uring_cq_ready() to check for ready cqes
  io_uring: retry io_uring_submit() if it fails with errno=EINTR

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

block: Factor out bdrv_run_co()

We have a few bdrv_*() functions that can either spawn a new coroutine
and wait for it with BDRV_POLL_WHILE() or use a fastpath if they are
alreeady running in a coroutine. All of them duplicate basically the
same code.

Factor the common code into a new function bdrv_run_co().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20200520144901.16589-1-vsementsov@virtuozzo.com
   [Factor out bdrv_run_co_entry too]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

exec: Rename qemu_ram_writeback() as qemu_ram_msync()

Rename qemu_ram_writeback() as qemu_ram_msync() to better
match what it does.

Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-5-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

hw/block: Let the NVMe emulated device be target-agnostic

Now than the non-target specific memory_region_msync() function
is available, use it to make this device target-agnostic.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-4-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

memory: Extract memory_region_msync() from memory_region_writeback()

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-3-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>