OSDN Git Service
Alex Elder [Fri, 12 Feb 2021 14:33:59 +0000 (08:33 -0600)]
net: ipa: use dev_err_probe() in ipa_clock.c
When initializing the IPA core clock and interconnects, it's
possible we'll get an EPROBE_DEFER error. This isn't really an
error, it's just means we need to be re-probed later.
Use dev_err_probe() to report the error rather than dev_err().
This avoids polluting the log with these "error" messages.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Fri, 12 Feb 2021 14:33:58 +0000 (08:33 -0600)]
net: ipa: use a separate pointer for adjusted GSI memory
This patch actually fixes a bug, though it doesn't affect the two
platforms supported currently. The fix implements GSI memory
pointers a bit differently.
For IPA version 4.5 and above, the address space for almost all GSI
registers is adjusted downward by a fixed amount. This is currently
handled by adjusting the I/O virtual address pointer after it has
been mapped. The bug is that the pointer is not "de-adjusted" as it
should be when it's unmapped.
This patch fixes that error, but it does so by maintaining one "raw"
pointer for the mapped memory range. This is assigned when the
memory is mapped and used to unmap the memory. This pointer is also
used to access the two registers that do *not* sit in the "adjusted"
memory space.
Rather than adjusting *that* pointer, we maintain a separate pointer
that's an adjusted copy of the "raw" pointer, and that is used for
most GSI register accesses.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Feb 2021 00:48:52 +0000 (16:48 -0800)]
Merge tag 'mac80211-next-for-net-next-2021-02-12' of git://git./linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Last set of updates:
* more minstrel work from Felix to reduce the
probing overhead
* QoS for nl80211 control port frames
* STBC injection support
* and a couple of small fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Fri, 12 Feb 2021 12:23:10 +0000 (06:23 -0600)]
octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()
Code at line 967 implies that rsp->fwdata.supported_fec may be up to 4:
967: if (rsp->fwdata.supported_fec <= FEC_MAX_INDEX)
If rsp->fwdata.supported_fec evaluates to 4, then there is an
out-of-bounds read at line 971 because fec is an array with
a maximum of 4 elements:
954 const int fec[] = {
955 ETHTOOL_FEC_OFF,
956 ETHTOOL_FEC_BASER,
957 ETHTOOL_FEC_RS,
958 ETHTOOL_FEC_BASER | ETHTOOL_FEC_RS};
959 #define FEC_MAX_INDEX 4
971: fecparam->fec = fec[rsp->fwdata.supported_fec];
Fix this by properly indexing fec[] with rsp->fwdata.supported_fec - 1.
In this case the proper indexes 0 to 3 are used when
rsp->fwdata.supported_fec evaluates to a range of 1 to 4, correspondingly.
Fixes:
d0cf9503e908 ("octeontx2-pf: ethtool fec mode support")
Addresses-Coverity-ID:
1501722 ("Out-of-bounds read")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 12 Feb 2021 11:38:57 +0000 (11:38 +0000)]
octeontx2-af: Fix spelling mistake "recievd" -> "received"
There is a spelling mistake in the text in array rpm_rx_stats_fields,
fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Feb 2021 00:43:13 +0000 (16:43 -0800)]
Merge tag 'wireless-drivers-next-2021-02-12' of git://git./linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.12
Second set of patches for v5.12. Last time there was a smaller pull
request so unsurprisingly this time we have a big one. mt76 has new
hardware support and lots of new features, iwlwifi getting new
features and rtw88 got NAPI support. And the usual cleanups and fixes
all over.
Major changes:
ath10k
* support setting SAR limits via nl80211
rtw88
* support 8821 RFE type2 devices
* NAPI support
iwlwifi
* add new FW API support
* support for new So devices
* support for RF interference mitigation (RFI)
* support for PNVM (Platform Non-Volatile Memory, a firmware data
file) from BIOS
mt76
* add new mt7921e driver
* 802.11 encap offload support
* support for multiple pcie gen1 host interfaces on 7915
* 7915 testmode support
* 7915 txbf support
brcmfmac
* support for CQM RSSI notifications
wil6210
* support for extended DMG MCS 12.1 rate
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Fedorenko [Fri, 12 Feb 2021 10:48:14 +0000 (13:48 +0300)]
rxrpc: Fix dependency on IPv6 in udp tunnel config
As udp_port_cfg struct changes its members with dependency on IPv6
configuration, the code in rxrpc should also check for IPv6.
Fixes:
1a9b86c9fd95 ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Feb 2021 00:31:46 +0000 (16:31 -0800)]
Merge branch 'mptcp-genl-events'
Mat Martineau says:
====================
mptcp: Add genl events for connection info
This series from the MPTCP tree adds genl multicast events that are
important for implementing a userspace path manager. In MPTCP, a path
manager is responsible for adding or removing additional subflows on
each MPTCP connection. The in-kernel path manager (already part of the
kernel) is a better fit for many server use cases, but the additional
flexibility of userspace path managers is often useful for client
devices.
Patches 1, 2, 4, 5, and 6 do some refactoring to streamline the netlink
event implementation in the final patch.
Patch 3 improves the timeliness of subflow destruction to ensure the
'subflow closed' event will be sent soon enough.
Patch 7 allows use of the GENL_UNS_ADMIN_PERM flag on genl mcast groups
to mandate CAP_NET_ADMIN, which is important to protect token information
in the MPTCP events. This is a genetlink change.
Patch 8 adds the MPTCP netlink events.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Sat, 13 Feb 2021 00:00:01 +0000 (16:00 -0800)]
mptcp: add netlink event support
Allow userspace (mptcpd) to subscribe to mptcp genl multicast events.
This implementation reuses the same event API as the mptcp kernel fork
to ease integration of existing tools, e.g. mptcpd.
Supported events include:
1. start and close of an mptcp connection
2. start and close of subflows (joins)
3. announce and withdrawals of addresses
4. subflow priority (backup/non-backup) change.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 12 Feb 2021 23:59:59 +0000 (15:59 -0800)]
mptcp: avoid lock_fast usage in accept path
Once event support is added this may need to allocate memory while msk
lock is held with softirqs disabled.
Not using lock_fast also allows to do the allocation with GFP_KERNEL.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 12 Feb 2021 23:59:58 +0000 (15:59 -0800)]
mptcp: pass subflow socket to a few helpers
Pass the first/initial subflow to the existing functions so they can
pass this on to the notification handler that is added later in the
series.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 12 Feb 2021 23:59:57 +0000 (15:59 -0800)]
mptcp: move subflow close loop after sk close check
In case mptcp socket is already dead the entire mptcp socket
will be freed. We can avoid the close check in this case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 12 Feb 2021 23:59:56 +0000 (15:59 -0800)]
mptcp: schedule worker when subflow is closed
When remote side closes a subflow we should schedule the worker to
dispose of the subflow in a timely manner.
Otherwise, SF_CLOSED event won't be generated until the mptcp
socket itself is closing or local side is closing another subflow.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 12 Feb 2021 23:59:55 +0000 (15:59 -0800)]
mptcp: split __mptcp_close_ssk helper
Prepare for subflow close events:
When mptcp connection is torn down its enough to send the mptcp socket
close notification rather than a subflow close event for all of the
subflows followed by the mptcp close event.
This splits the helper: mptcp_close_ssk() will emit the close
notification, __mptcp_close_ssk will not.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Fri, 12 Feb 2021 23:59:54 +0000 (15:59 -0800)]
mptcp: move pm netlink work into pm_netlink
Allows to make some functions static and avoids acquire of the pm
spinlock in protocol.c.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Feb 2021 00:20:34 +0000 (16:20 -0800)]
Merge branch 'mptcp-selftests'
Mat Martineau says:
====================
mptcp: Selftest enhancement and fixes
This is a collection of selftest updates from the MPTCP tree.
Patch 1 uses additional 'ss' command line parameters and 'nstat' to
improve output when certain MPTCP tests fail.
Patches 2 & 3 fix a copy/paste error and some output formatting.
Patch 4 makes sure tests still pass if certain connection-related
packets are retransmitted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Fri, 12 Feb 2021 23:20:30 +0000 (15:20 -0800)]
selftests: mptcp: fail if not enough SYN/3rd ACK
If we receive less MPCapable SYN or 3rd ACK than expected, we now mark
the test as failed.
On the other hand, if we receive more, we keep the warning but we add a
hint that it is probably due to retransmissions and that's why we don't
mark the test as failed.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/148
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Fri, 12 Feb 2021 23:20:29 +0000 (15:20 -0800)]
selftests: mptcp: display warnings on one line
Before we had this in case of SYN retransmissions:
(...)
# ns4 MPTCP -> ns2 (10.0.1.2:10034 ) MPTCP (duration 1201ms) [ OK ]
# ns4 MPTCP -> ns2 (dead:beef:1::2:10035) MPTCP (duration 1242ms) [ OK ]
# ns4 MPTCP -> ns2 (10.0.2.1:10036 ) MPTCP ns2-
60143c00-cDZWo4 SYNRX: MPTCP -> MPTCP: expect 11, got
# 13
# (duration 6221ms) [ OK ]
# ns4 MPTCP -> ns2 (dead:beef:2::1:10037) MPTCP (duration 1427ms) [ OK ]
# ns4 MPTCP -> ns3 (10.0.2.2:10038 ) MPTCP (duration 881ms) [ OK ]
(...)
Now we have:
(...)
# ns4 MPTCP -> ns2 (10.0.1.2:10034 ) MPTCP (duration 1201ms) [ OK ]
# ns4 MPTCP -> ns2 (dead:beef:1::2:10035) MPTCP (duration 1242ms) [ OK ]
# ns4 MPTCP -> ns2 (10.0.2.1:10036 ) MPTCP (duration 6221ms) [ OK ] WARN: SYNRX: expect 11, got 13
# ns4 MPTCP -> ns2 (dead:beef:2::1:10037) MPTCP (duration 1427ms) [ OK ]
# ns4 MPTCP -> ns3 (10.0.2.2:10038 ) MPTCP (duration 881ms) [ OK ]
(...)
So we put everything on one line, keep the durations and "OK" aligned
and removed duplicated info to short the warning.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Fri, 12 Feb 2021 23:20:28 +0000 (15:20 -0800)]
selftests: mptcp: fix ACKRX debug message
Info from received MPCapable SYN were printed instead of the ones from
received MPCapable 3rd ACK.
Fixes:
fed61c4b584c ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 12 Feb 2021 23:20:27 +0000 (15:20 -0800)]
selftests: mptcp: dump more info on errors
Even if that may sound completely unlikely, the mptcp implementation
is not perfect, yet.
When the self-tests report an error we usually need more information
of what the scripts currently report. iproute allow provides
some additional goodies since a few releases, let's dump them.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Feb 2021 21:13:16 +0000 (13:13 -0800)]
Merge branch 'hns3-cleanups'
Huazhong Tan says:
====================
net: hns3: some cleanups for -next
To improve code readability and maintainability, the series
refactor out some bloated functions in the HNS3 ethernet driver.
change log:
V2: remove an unused variable in #5
previous version:
V1: https://patchwork.kernel.org/project/netdevbpf/cover/
1612943005-59416-1-git-send-email-tanhuazhong@huawei.com/
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Hao Chen [Fri, 12 Feb 2021 03:24:17 +0000 (11:24 +0800)]
net: hns3: refactor out hclge_rm_vport_all_mac_table()
hclge_rm_vport_all_mac_table() is bloated, so split it into
separate functions for readability and maintainability.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 12 Feb 2021 03:24:16 +0000 (11:24 +0800)]
net: hns3: refactor out hclgevf_set_rss_tuple()
To make it more readable and maintainable, split
hclgevf_set_rss_tuple() into two parts.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 12 Feb 2021 03:24:15 +0000 (11:24 +0800)]
net: hns3: refactor out hclge_set_rss_tuple()
To make it more readable and maintainable, split
hclge_set_rss_tuple() into two parts.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Fri, 12 Feb 2021 03:24:14 +0000 (11:24 +0800)]
net: hns3: split out hclgevf_cmd_send()
hclgevf_cmd_send() is bloated, so split it into separate
functions for readability and maintainability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Fri, 12 Feb 2021 03:24:13 +0000 (11:24 +0800)]
net: hns3: split out hclge_cmd_send()
hclge_cmd_send() is bloated, so split it into separate
functions for readability and maintainability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Fri, 12 Feb 2021 03:21:08 +0000 (11:21 +0800)]
net: hns3: split out hclge_dbg_dump_qos_buf_cfg()
hclge_dbg_dump_qos_buf_cfg() is bloated, so split it into
separate functions for readability and maintainability.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Fri, 12 Feb 2021 03:21:07 +0000 (11:21 +0800)]
net: hns3: refactor out hclgevf_get_rss_tuple()
To improve code readability and maintainability, separate
the flow type parsing part and the converting part from
bloated hclgevf_get_rss_tuple().
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Fri, 12 Feb 2021 03:21:06 +0000 (11:21 +0800)]
net: hns3: refactor out hclge_get_rss_tuple()
To improve code readability and maintainability, separate
the flow type parsing part and the converting part from
bloated hclge_get_rss_tuple().
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Fri, 12 Feb 2021 03:21:05 +0000 (11:21 +0800)]
net: hns3: refactor out hclge_set_vf_vlan_common()
To improve code readability and maintainability, separate
the command handling part and the status parsing part from
bloated hclge_set_vf_vlan_common().
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiaran Zhang [Fri, 12 Feb 2021 03:21:04 +0000 (11:21 +0800)]
net: hns3: use ipv6_addr_any() helper
Use common ipv6_addr_any() to determine if an addr is ipv6 any addr.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Fri, 12 Feb 2021 03:21:03 +0000 (11:21 +0800)]
net: hns3: clean up hns3_dbg_cmd_write()
As more commands are added, hns3_dbg_cmd_write() is going to
get more bloated, so move the part about command check into
a separate function.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Fri, 12 Feb 2021 03:21:02 +0000 (11:21 +0800)]
net: hns3: refactor out hclgevf_cmd_convert_err_code()
To improve code readability and maintainability, refactor
hclgevf_cmd_convert_err_code() with an array of imp_errcode
and common_errno mapping, instead of a bloated switch/case.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Fri, 12 Feb 2021 03:21:01 +0000 (11:21 +0800)]
net: hns3: refactor out hclge_cmd_convert_err_code()
To improve code readability and maintainability, refactor
hclge_cmd_convert_err_code() with an array of imp_errcode
and common_errno mapping, instead of a bloated switch/case.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 12 Feb 2021 09:50:23 +0000 (10:50 +0100)]
nl80211: add documentation for HT/VHT/HE disable attributes
These were missed earlier, add the necessary documentation
and, while at it, clarify it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210212105023.895c3389f063.I46dea3bfc64385bc6f600c50d294007510994f8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ben Greear [Thu, 4 Feb 2021 14:46:10 +0000 (06:46 -0800)]
cfg80211/mac80211: Support disabling HE mode
Allow user to disable HE mode, similar to how VHT and HT
can be disabled. Useful for testing.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20210204144610.25971-1-greearb@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Philipp Borgers [Mon, 25 Jan 2021 15:07:44 +0000 (16:07 +0100)]
mac80211: add STBC encoding to ieee80211_parse_tx_radiotap
This patch adds support for STBC encoding to the radiotap tx parse
function. Prior to this change adding the STBC flag to the radiotap
header did not encode frames with STBC.
Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>
Link: https://lore.kernel.org/r/20210125150744.83065-1-borgers@mi.fu-berlin.de
[use u8_get_bits/u32_encode_bits instead of manually shifting]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Wed, 27 Jan 2021 05:57:35 +0000 (06:57 +0100)]
mac80211: minstrel_ht: remove sample rate switching code for constrained devices
This was added to mitigate the effects of too much sampling on devices that
use a static global fallback table instead of configurable multi-rate retry.
Now that the sampling algorithm is improved, this code path no longer performs
any better than the standard probing on affected devices.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-6-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Wed, 27 Jan 2021 05:57:34 +0000 (06:57 +0100)]
mac80211: minstrel_ht: show sampling rates in debugfs
This makes it easier to see what rates are going to be tested next
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-5-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Wed, 27 Jan 2021 05:57:33 +0000 (06:57 +0100)]
mac80211: minstrel_ht: significantly redesign the rate probing strategy
The biggest flaw in current minstrel_ht is the fact that it needs way too
many probing packets to be able to quickly find the best rate.
Depending on the wifi hardware and operating mode, this can significantly
reduce throughput when not operating at the highest available data rate.
In order to be able to significantly reduce the amount of rate sampling,
we need a much smarter selection of probing rates.
The new approach introduced by this patch maintains a limited set of
available rates to be tested during a statistics window.
They are split into distinct categories:
- MINSTREL_SAMPLE_TYPE_INC - incremental rate upgrade:
Pick the next rate group and find the first rate that is faster than
the current max. throughput rate
- MINSTREL_SAMPLE_TYPE_JUMP - random testing of higher rates:
Pick a random rate from the next group that is faster than the current
max throughput rate. This allows faster adaptation when the link changes
significantly
- MINSTREL_SAMPLE_TYPE_SLOW - test a rate between max_prob, max_tp2 and
max_tp in order to reduce the gap between them
In order to prioritize sampling, every 6 attempts are split into 3x INC,
2x JUMP, 1x SLOW.
Available rates are checked and refilled on every stats window update.
With this approach, we finally get a very small delta in throughput when
comparing setting the optimal data rate as a fixed rate vs normal rate
control operation.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Wed, 27 Jan 2021 05:57:32 +0000 (06:57 +0100)]
mac80211: minstrel_ht: reduce the need to sample slower rates
In order to more gracefully be able to fall back to lower rates without too
much throughput fluctuations, initialize all untested rates below tested ones
to the maximum probabilty of higher rates.
Usually this leads to untested lower rates getting initialized with a
probability value of 100%, making them better candidates for fallback without
having to rely on random probing
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Wed, 27 Jan 2021 05:57:31 +0000 (06:57 +0100)]
mac80211: minstrel_ht: update total packets counter in tx status path
Keep the update in one place and prepare for further rework
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Wed, 27 Jan 2021 05:57:30 +0000 (06:57 +0100)]
mac80211: minstrel_ht: use bitfields to encode rate indexes
Get rid of a lot of divisions and modulo operations
Reduces code size and improves performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210127055735.78599-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Luca Coelho [Thu, 4 Feb 2021 13:44:39 +0000 (15:44 +0200)]
cfg80211: initialize reg_rule in __freq_reg_info()
Sparse started warning on this function because we can potentially
return an uninitialized value. The reason is that if the caller
passes a min_bw value that is higher then the last value in bws[], we
will not go into the loop and reg_rule will remain initialized. This
cannot happen because the only caller of this function uses either 1
or 20 in min_bw, but the function will be more robust if we
pre-initialize the value.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210204154439.6c884ea7281c.I257278d03b0c1ae0aa6631672cfa48f1a95d5996@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Colin Ian King [Fri, 5 Feb 2021 17:53:52 +0000 (17:53 +0000)]
mac80211: fix potential overflow when multiplying to u32 integers
The multiplication of the u32 variables tx_time and estimated_retx is
performed using a 32 bit multiplication and the result is stored in
a u64 result. This has a potential u32 overflow issue, so avoid this
by casting tx_time to a u64 to force a 64 bit multiply.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes:
050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210205175352.208841-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Markus Theil [Sat, 6 Feb 2021 11:51:12 +0000 (12:51 +0100)]
mac80211: enable QoS support for nl80211 ctrl port
This patch unifies sending control port frames
over nl80211 and AF_PACKET sockets a little more.
Before this patch, EAPOL frames got QoS prioritization
only when using AF_PACKET sockets.
__ieee80211_select_queue only selects a QoS-enabled queue
for control port frames, when the control port protocol
is set correctly on the skb. For the AF_PACKET path this
works, but the nl80211 path used ETH_P_802_3.
Another check for injected frames in wme.c then prevented
the QoS TID to be copied in the frame.
In order to fix this, get rid of the frame injection marking
for nl80211 ctrl port and set the correct ethernet protocol.
Please note:
An erlier version of this path tried to prevent
frame aggregation for control port frames in order to speed up
the initial connection setup a little. This seemed to cause
issues on my older Intel dvm-based hardware, and was therefore
removed again. Future commits which try to reintroduce this
have to check carefully how hw behaves with aggregated and
non-aggregated traffic for the same TID.
My NIC: Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20210206115112.567881-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Matteo Croce [Mon, 8 Feb 2021 11:33:56 +0000 (12:33 +0100)]
cfg80211: remove unused callback
The ieee80211 class registers a callback which actually does nothing.
Given that the callback is optional, and all its accesses are protected
by a NULL check, remove it entirely.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Link: https://lore.kernel.org/r/20210208113356.4105-1-mcroce@linux.microsoft.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Po-Hao Huang [Tue, 9 Feb 2021 07:07:55 +0000 (15:07 +0800)]
rtw88: 8822c: update RF_B (2/2) parameter tables to v60
Update RTL8822C devices' RF_A tables to v60.
The new parameters fix incorrect RSSI report under 2.4G link.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-9-pkshih@realtek.com
Po-Hao Huang [Tue, 9 Feb 2021 07:07:54 +0000 (15:07 +0800)]
rtw88: 8822c: update RF_B (1/2) parameter tables to v60
Update RTL8822C devices' RF_B tables to v60.
The new parameters fix incorrect RSSI report under 2.4G link.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-8-pkshih@realtek.com
Po-Hao Huang [Tue, 9 Feb 2021 07:07:53 +0000 (15:07 +0800)]
rtw88: 8822c: update RF_A parameter tables to v60
Update RTL8822C devices' RF_A tables to v60.
The new parameters fix incorrect RSSI report under 2.4G link.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-7-pkshih@realtek.com
Po-Hao Huang [Tue, 9 Feb 2021 07:07:52 +0000 (15:07 +0800)]
rtw88: 8822c: update MAC/BB parameter tables to v60
Update RTL8822C devices' MAC/BB tables to v60.
The new parameters fix incorrect RSSI report under 2.4G link.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-6-pkshih@realtek.com
Po-Hao Huang [Tue, 9 Feb 2021 07:07:51 +0000 (15:07 +0800)]
rtw88: replace tx tasklet with work queue
Replace tasklet so we can do tx scheduling in parallel. Since throughput
is delay-sensitive in most cases, we allocate a dedicated, high priority
wq for our needs.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-5-pkshih@realtek.com
Po-Hao Huang [Tue, 9 Feb 2021 07:07:50 +0000 (15:07 +0800)]
rtw88: add napi support
Use napi to reduce overhead on rx interrupts.
Driver used to interrupt kernel for every Rx packet, this could
affect both system and network performance. NAPI is a mechanism that
uses polling when processing huge amount of traffic, by doing this
the number of interrupts can be decreased.
Network performance can also benefit from this patch. Since TCP
connection is bidirectional and acks are required for every several
packets. These ack packets occupie the PCI bus bandwidth and could
lead to performance degradation.
When napi is used, GRO receive is enabled by default in the mac80211
stack. So mac80211 won't pass every RX TCP packets to the kernel TCP
network stack immediately. Instead an aggregated large length TCP packet
will be delivered.
This reduces the tx acks sent and gains rx performance. After the patch,
the Rx throughput increases about 25Mbps in 11ac.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-4-pkshih@realtek.com
Po-Hao Huang [Tue, 9 Feb 2021 07:07:49 +0000 (15:07 +0800)]
rtw88: add rts condition
Since we set the IEEE80211_HW_HAS_RATE_CONTROL flag, so use_rts in
ieee80211_tx_info will never be set in the ieee80211_xmit_fast path.
Add length check for skb to decide whether rts is needed.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-3-pkshih@realtek.com
Po-Hao Huang [Tue, 9 Feb 2021 07:07:48 +0000 (15:07 +0800)]
rtw88: add dynamic rrsr configuration
Register rrsr determines the response rate we send.
In field tests, using rate higher than current tx rate could lead
to difficulty for the receiving end to receive management/control
frames. Calculate current modulation level by tx rate then cross out
rate higher than those.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-2-pkshih@realtek.com
Luca Coelho [Thu, 11 Feb 2021 20:30:55 +0000 (22:30 +0200)]
iwlwifi: remove incorrect comment in pnvm
We use this driver as a backport that also runs on older kernels (as
part of the backports project). So we use some checks to backport or
prevent code from compiling in incompatible kernel version.
When I took one of the PNVM patches from the backport, I accidentally
left the comment that a certain part of the code doesn't work in older
kernels. This obviously should never be valid for the mainline.
Remove this comment.
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210211223049.40d545a0fa89.I04793aaa5312b926335c8db32131f000432df511@changeid
David S. Miller [Fri, 12 Feb 2021 03:08:07 +0000 (19:08 -0800)]
Merge branch 'sock-rx-qmap'
Tariq Toukan says:
====================
Compile-flag for sock RX queue mapping
Socket's RX queue mapping logic is useful also for non-XPS use cases.
This series breaks the dependency between the two, introducing a new
kernel config flag SOCK_RX_QUEUE_MAPPING.
Here we select this new kernel flag from TLS_DEVICE, as well as XPS.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan [Thu, 11 Feb 2021 11:35:53 +0000 (13:35 +0200)]
net/mlx5: Remove TLS dependencies on XPS
No real dependency on XPS, but on RX queue mapping, which
is being selected by TLS_DEVICE.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Thu, 11 Feb 2021 11:35:52 +0000 (13:35 +0200)]
net/tls: Select SOCK_RX_QUEUE_MAPPING from TLS_DEVICE
Compile-in the socket RX queue mapping field and logic when TLS_DEVICE
is enabled. This allows device drivers to pick the recorded socket's
RX queue and use it for streams distribution.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Thu, 11 Feb 2021 11:35:51 +0000 (13:35 +0200)]
net/sock: Add kernel config SOCK_RX_QUEUE_MAPPING
Use a new config SOCK_RX_QUEUE_MAPPING to compile-in the socket
RX queue field and logic, instead of the XPS config.
This breaks dependency in XPS, and allows selecting it from non-XPS
use cases, as we do in the next patch.
In addition, use the new flag to wrap the logic in sk_rx_queue_get()
and protect access to the sk_rx_queue_mapping field, while keeping
the function exposed unconditionally, just like sk_rx_queue_set()
and sk_rx_queue_clear().
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arjun Roy [Thu, 11 Feb 2021 21:21:07 +0000 (13:21 -0800)]
tcp: Sanitize CMSG flags and reserved args in tcp_zerocopy_receive.
Explicitly define reserved field and require it and any subsequent
fields to be zero-valued for now. Additionally, limit the valid CMSG
flags that tcp_zerocopy_receive accepts.
Fixes:
7eeba1706eba ("tcp: Add receive timestamp support for receive zerocopy.")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Suggested-by: Leon Romanovsky <leon@kernel.org>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 11 Feb 2021 20:20:08 +0000 (21:20 +0100)]
r8169: handle tx before rx in napi poll
Cleaning up tx descriptors first increases the chance that
rtl_rx() can allocate new skb's from the cache.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Thu, 11 Feb 2021 19:34:10 +0000 (11:34 -0800)]
net: fix dev_ifsioc_locked() race condition
dev_ifsioc_locked() is called with only RCU read lock, so when
there is a parallel writer changing the mac address, it could
get a partially updated mac address, as shown below:
Thread 1 Thread 2
// eth_commit_mac_addr_change()
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
// dev_ifsioc_locked()
memcpy(ifr->ifr_hwaddr.sa_data,
dev->dev_addr,...);
Close this race condition by guarding them with a RW semaphore,
like netdev_get_name(). We can not use seqlock here as it does not
allow blocking. The writers already take RTNL anyway, so this does
not affect the slow path. To avoid bothering existing
dev_set_mac_address() callers in drivers, introduce a new wrapper
just for user-facing callers on ioctl and rtnetlink paths.
Note, bonding also changes slave mac addresses but that requires
a separate patch due to the complexity of bonding code.
Fixes:
3710becf8a58 ("net: RCU locking for simple ioctl()")
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Chulski [Thu, 11 Feb 2021 15:13:19 +0000 (17:13 +0200)]
net: mvpp2: fix interrupt mask/unmask skip condition
The condition should be skipped if CPU ID equal to nthreads.
The patch doesn't fix any actual issue since
nthreads = min_t(unsigned int, num_present_cpus(), MVPP2_MAX_THREADS).
On all current Armada platforms, the number of CPU's is
less than MVPP2_MAX_THREADS.
Fixes:
e531f76757eb ("net: mvpp2: handle cases where more CPUs are available than s/w threads")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Feb 2021 01:52:13 +0000 (17:52 -0800)]
Merge branch 'am65-cpsw-nuss-switchdev-driver'
Vignesh Raghavendra says:
====================
net: ti: am65-cpsw-nuss: Add switchdev driver
This series adds switchdev support for AM65 CPSW NUSS driver to support
multi port CPSW present on J721e and AM64 SoCs.
It adds devlink hook to switch b/w switch mode and multi mac mode.
v2:
Rebased on latest net-next
Update patch 1/4 with rationale for using devlink
====================
Vignesh Raghavendra [Thu, 11 Feb 2021 10:56:44 +0000 (16:26 +0530)]
docs: networking: ti: Add driver doc for AM65 NUSS switch driver
J721e, J7200 and AM64 have multi port switches which can work in multi
mac mode and in switch mode. Add documentation explaining how to use
different modes.
Borrowed from:
Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vignesh Raghavendra [Thu, 11 Feb 2021 10:56:43 +0000 (16:26 +0530)]
net: ti: am65-cpsw-nuss: Add switchdev support
J721e, J7200 and AM64 have multi port switches which can work in multi
mac mode and in switch mode. Add support for configuring this HW in
switch mode using devlink and switchdev notifiers.
Support is similar to existing CPSW switchdev implementation of TI's 32 bit
platform like AM33/AM43/AM57.
To enable switch mode:
devlink dev param set platform/
8000000.ethernet name switch_mode value true cmode runtime
All configuration is implemented via switchdev API and notifiers.
Supported:
- SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS
- SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS
- SWITCHDEV_ATTR_ID_PORT_STP_STATE
- SWITCHDEV_OBJ_ID_PORT_VLAN
- SWITCHDEV_OBJ_ID_PORT_MDB
- SWITCHDEV_OBJ_ID_HOST_MDB
Hence AM65 CPSW switchdev driver supports:
- FDB offloading
- MDB offloading
- VLAN filtering and offloading
- STP
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vignesh Raghavendra [Thu, 11 Feb 2021 10:56:42 +0000 (16:26 +0530)]
net: ti: am65-cpsw-nuss: Add netdevice notifiers
Register netdevice notifiers in order to receive notification when
individual MAC ports are added to the HW bridge.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vignesh Raghavendra [Thu, 11 Feb 2021 10:56:41 +0000 (16:26 +0530)]
net: ti: am65-cpsw-nuss: Add devlink support
AM65 NUSS ethernet switch on K3 devices can be configured to work either
in independent mac mode where each port acts as independent network
interface (multi mac) or switch mode.
Add devlink hooks to provide a way to switch b/w these modes.
Rationale to use devlink instead of defaulting to bridge mode is that
SoC use cases require to support multiple independent MAC ports with no
switching so that users can use software bridges with multi-mac
configuration (e.g: to support LAG, HSR/PRP, etc). Also, switching
between multi mac and switch mode requires significant Port and ALE
reconfiguration, therefore is easier to be made as part of mode change
devlink hooks. It also allows to keep user interface similar to what
was implemented for the previous generation of TI CPSW IP
(on AM33/AM43/AM57 SoCs).
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Feb 2021 23:04:17 +0000 (15:04 -0800)]
Merge branch 'bcm4908_enet-post-review-fixes'
Rafał Miłecki says:
====================
bcm4908_enet: post-review fixes
V2 of my BCM4908 Ethernet patchset was applied to the net-next.git and
it was later that is received some extra reviews. I'm sending patches
that handle pointed out issues.
David: earler I missed that V2 was applied and I sent V3 and V4 of my
inital patchset. Sorry for that. I think it's the best to ignore V3 and
V4 I sent and proceed with this fixes patchset instead.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Thu, 11 Feb 2021 12:12:39 +0000 (13:12 +0100)]
net: broadcom: bcm4908_enet: fix endianness in xmit code
Use le32_to_cpu() for reading __le32 struct field filled by hw.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Thu, 11 Feb 2021 12:12:38 +0000 (13:12 +0100)]
net: broadcom: bcm4908_enet: fix received skb length
Use ETH_FCS_LEN instead of magic value and drop incorrect + 2
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Thu, 11 Feb 2021 12:12:37 +0000 (13:12 +0100)]
net: broadcom: bcm4908_enet: fix minor typos
1. Fix "ensable" typo noticed by Andrew
2. Fix chipset name in the struct net_device_ops variable
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Thu, 11 Feb 2021 12:12:36 +0000 (13:12 +0100)]
net: broadcom: bcm4908_enet: drop "inline" from C functions
It seems preferred to let compiler optimize code if applicable.
While at it drop unused enet_umac_maskset().
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Thu, 11 Feb 2021 12:12:35 +0000 (13:12 +0100)]
net: broadcom: bcm4908_enet: drop unneeded memset()
dma_alloc_coherent takes care of zeroing allocated memory
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Thu, 11 Feb 2021 12:12:34 +0000 (13:12 +0100)]
net: broadcom: rename BCM4908 driver & update DT binding
compatible string was updated to match normal naming convention so
update driver as well
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Thu, 11 Feb 2021 12:12:33 +0000 (13:12 +0100)]
dt-bindings: net: bcm4908-enet: include ethernet-controller.yaml
It should be /included/ by every Ethernet controller binding. It adds
support for various generic properties.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Thu, 11 Feb 2021 12:12:32 +0000 (13:12 +0100)]
dt-bindings: net: rename BCM4908 Ethernet binding
Rob pointed out that a normal convention is "brcm,bcm4908-enet" so
update whole binding to match it.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Feb 2021 22:59:01 +0000 (14:59 -0800)]
Merge branch 'for-upstream' of git://git./linux/kern
el/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2021-02-11
Here's the main bluetooth-next pull request for 5.12:
- Add support for advertising monitor offliading using Microsoft
vendor extensions
- Add firmware download support for MediaTek MT7921U USB devices
- Suspend-related fixes for Qualcomm devices
- Add support for Intel GarfieldPeak controller
- Various other smaller fixes & cleanups
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Feb 2021 22:55:04 +0000 (14:55 -0800)]
Merge branch 'marvell-cn10k'
Geetha sowjanya says:
====================
Add Marvell CN10K support
The current admin function (AF) driver and the netdev driver supports
OcteonTx2 silicon variants. The same OcteonTx2's
Resource Virtualization Unit (RVU) is carried forward to the next-gen
silicon ie OcteonTx3, with some changes and feature enhancements.
This patch set adds support for OcteonTx3 (CN10K) silicon and gets
the drivers to the same level as OcteonTx2. No new OcteonTx3 specific
features are added.
Changes cover below HW level differences
- PCIe BAR address changes wrt shared mailbox memory region
- Receive buffer freeing to HW
- Transmit packet's descriptor submission to HW
- Programmable HW interface identifiers (channels)
- Increased MTU support
- A Serdes MAC block (RPM) configuration
v5-v6
Rebased on top of latest net-next branch.
v4-v5
Fixed sparse warnings.
v3-v4
Fixed compiler warnings.
v2-v3
Reposting as a single thread.
Rebased on top latest net-next branch.
v1-v2
Fixed check-patch reported issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Thu, 11 Feb 2021 15:58:34 +0000 (21:28 +0530)]
octeontx2-af: cn10k: MAC internal loopback support
MAC on CN10K silicon support loopback for selftest or debug purposes.
This patch does necessary configuration to loopback packets upon receiving
request from LMAC mapped RVU PF's netdev via mailbox.
Also MAC (CGX) on OcteonTx2 silicon variants and MAC (RPM) on
OcteonTx3 CN10K are different and loopback needs to be configured
differently. Upper layer interface between RVU AF and PF netdev is
kept same. Based on silicon variant appropriate fn() pointer is
called to config the MAC.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Thu, 11 Feb 2021 15:58:33 +0000 (21:28 +0530)]
octeontx2-af: cn10k: Add RPM Rx/Tx stats support
RPM supports below list of counters as an extension to existing counters
* class based flow control pause frames
* vlan/jabber/fragmented packets
* fcs/alignment/oversized error packets
This patch adds support to display supported RPM counters via debugfs
and define new mbox rpm_stats to read all support counters.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rakesh Babu [Thu, 11 Feb 2021 15:58:32 +0000 (21:28 +0530)]
octeontx2-af: cn10k: Add RPM LMAC pause frame support
Flow control configuration is different for CGX(Octeontx2)
and RPM(CN10K) functional blocks. This patch adds the necessary
changes for RPM to support 802.3 pause frames configuration on
cn10k platforms.
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Thu, 11 Feb 2021 15:58:31 +0000 (21:28 +0530)]
octeontx2-pf: cn10k: Get max mtu supported from admin function
CN10K supports max MTU of 16K on LMAC links and 64k on LBK
links and Octeontx2 silicon supports 9K mtu on both links.
Get the same from nix_get_hw_info mbox message in netdev probe.
This patch also calculates receive buffer size required based
on the MTU set.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Thu, 11 Feb 2021 15:58:30 +0000 (21:28 +0530)]
octeontx2-af: cn10K: Add MTU configuration
OcteonTx3 CN10K silicon supports bigger MTU when compared
to 9216 MTU supported by OcteonTx2 silicon variants. Lookback
interface supports upto 64K and RPM LMAC interfaces support
upto 16K.
This patch does the necessary configuration and adds support
for PF/VF drivers to retrieve max packet size supported via mbox
This patch also configures tx link credit by considering supported
fifo size and max packet length for Octeontx3 silicon.
This patch also removes platform specific name from the driver name.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subbaraya Sundeep [Thu, 11 Feb 2021 15:58:29 +0000 (21:28 +0530)]
octeontx2-af: cn10k: Add support for programmable channels
NIX uses unique channel numbers to identify the packet sources/sinks
like CGX,LBK and SDP. The channel numbers assigned to each block are
hardwired in CN9xxx silicon.
The fixed channel numbers in CN9xxx are:
0x0 | a << 8 | b - LBK(0..3)_CH(0..63)
0x0 | a << 8 - Reserved
0x700 | a - SDP_CH(0..255)
0x800 | a << 8 | b << 4 | c - CGX(0..7)_LMAC(0..3)_CH(0..15)
All the channels in the above fixed enumerator(with maximum
number of blocks) are not required since some chips
have less number of blocks.
For CN10K silicon the channel numbers need to be programmed by
software in each block with the base channel number and range of
channels. This patch calculates and assigns the channel numbers
to efficiently distribute the channel number range(0-4095) among
all the blocks. The assignment is made based on the actual number of
blocks present and also contiguously leaving no holes.
The channel numbers remaining after the math are used as new CPT
replay channels present in CN10K. Also since channel numbers are
not fixed the transmit channel link number needed by AF consumers
is calculated by AF and sent along with nix_lf_alloc mailbox response.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam [Thu, 11 Feb 2021 15:58:28 +0000 (21:28 +0530)]
octeontx2-af: cn10k: Add RPM MAC support
OcteonTx2's next gen platform the CN10K has RPM MAC which has a
different serdes when compared to CGX MAC. Though the underlying
HW is different, the CSR interface has been designed largely inline
with CGX MAC, with few exceptions though. So we are using the same
CGX driver for RPM MAC as well and will have a different set of APIs
for RPM where ever necessary.
This patch adds initial support for CN10K's RPM MAC i.e. the driver
registration, communication with firmware etc. For communication with
firmware, RPM provides a different IRQ when compared to CGX.
The CGX and RPM blocks support different features. Currently few
features like ptp, flowcontrol and higig are not supported by RPM. This
patch adds new mailbox message "CGX_FEATURES_GET" to get the list of
features supported by underlying MAC.
RPM has different implementations for RX/TX stats. Unlike CGX,
bar offset of stat registers are different. This patch adds
support to access the same and dump the values in debugfs.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Thu, 11 Feb 2021 15:58:27 +0000 (21:28 +0530)]
octeontx2-pf: cn10k: Use LMTST lines for NPA/NIX operations
This patch adds support to use new LMTST lines for NPA batch free
and burst SQE flush. Adds new dev_hw_ops structure to hold platform
specific functions and create new files cn10k.c and cn10k.h.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Thu, 11 Feb 2021 15:58:26 +0000 (21:28 +0530)]
octeontx2-pf: cn10k: Map LMTST region
On CN10K platform transmit/receive buffer alloc and free from/to hardware
had changed to support burst operation. Whereas pervious silicon's only
support single buffer free at a time.
To Support the same firmware allocates a DRAM region for each PF/VF for
storing LMTLINES. These LMTLINES are used for NPA batch free and for
flushing SQE to the hardware.
PF/VF LMTST region is accessed via BAR4. PFs LMTST region is followed
by its VFs mbox memory. The size of region varies from 2KB to 256KB based
on number of LMTLINES configured.
This patch adds support for
- Mapping PF/VF LMTST region.
- Reserves 0-71 (RX + TX + XDP) LMTST lines for NPA batch
free operation.
- Reserves 72-512 LMTST lines for NIX SQE flush.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Thu, 11 Feb 2021 15:58:25 +0000 (21:28 +0530)]
octeontx2-pf: cn10k: Initialise NIX context
On CN10K platform NIX RQ and SQ context structure got changed.
This patch uses new mbox message "NIX_CN10K_AQ_ENQ" for NIX
context initialization on CN10K platform.
This patch also updates the nix_rx_parse_s and nix_sqe_sg_s
structures to add packet steering bit feilds.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Thu, 11 Feb 2021 15:58:24 +0000 (21:28 +0530)]
octeontx2-af: cn10k: Update NIX and NPA context in debugfs
On CN10K platform NPA and NIX context structure bit fields
had changed to support new features like bandwidth steering etc.
This patch dumps approprate context for CN10K platform.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Thu, 11 Feb 2021 15:58:23 +0000 (21:28 +0530)]
octeontx2-af: cn10k: Update NIX/NPA context structure
NIX hardware context structure got changed to accommodate new
features like bandwidth steering, L3/L4 outer/inner checksum
enable/disable etc., on CN10K platform.
This patch defines new mbox message NIX_CN10K_AQ_INST for new
NIX context initialization.
This patch also updates the NPA context structures to accommodate
bit field changes made for CN10K platform.
This patch also removes Big endian bit fields from existing
structures as its support got deprecated in current and upcoming silicons.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subbaraya Sundeep [Thu, 11 Feb 2021 15:58:22 +0000 (21:28 +0530)]
octeontx2-pf: cn10k: Add mbox support for CN10K
Firmware allocates memory regions for PFs and VFs in DRAM.
The PFs memory region is used for AF-PF and PF-VF mailbox.
This mbox facilitate communication between AF-PF and PF-VF.
On CN10K platform:
The DRAM region allocated to PF is enumerated as PF BAR4 memory.
PF BAR4 contains AF-PF mbox region followed by its VFs mbox region.
AF-PF mbox region base address is configured at RVU_AF_PFX_BAR4_ADDR
PF-VF mailbox base address is configured at
RVU_PF(x)_VF_MBOX_ADDR = RVU_AF_PF()_BAR4_ADDR+64KB. PF access its
mbox region via BAR4, whereas VF accesses PF-VF DRAM mailboxes via
BAR2 indirect access.
On CN9XX platform:
Mailbox region in DRAM is divided into two parts AF-PF mbox region and
PF-VF mbox region i.e all PFs mbox region is contiguous similarly all
VFs.
The base address of the AF-PF mbox region is configured at
RVU_AF_PF_BAR4_ADDR.
AF-PF1 mbox address can be calculated as RVU_AF_PF_BAR4_ADDR * mbox
size.
The base address of PF-VF mbox region for each PF is configure at
RVU_AF_PF(0..15)_VF_BAR4_ADDR.PF access its mbox region via BAR4 and its
VF mbox regions from RVU_PF_VF_BAR4_ADDR register, whereas VF access its
mbox region via BAR4.
This patch changes mbox initialization to support both CN9XX and CN10K
platform.
The patch also adds new hw_cap flag to setting hw features like TSO etc
and removes platform specific name from the PF/VF driver name to make it
appropriate for all supported platforms
This patch also removes platform specific name from the PF/VF driver name
to make it appropriate for all supported platforms
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subbaraya Sundeep [Thu, 11 Feb 2021 15:58:21 +0000 (21:28 +0530)]
octeontx2-af: cn10k: Add mbox support for CN10K platform
Firmware allocates memory regions for PFs and VFs in DRAM.
The PFs memory region is used for AF-PF and PF-VF mailbox.
This mbox facilitates communication between AF-PF and PF-VF.
On CN10K platform:
The DRAM region allocated to PF is enumerated as PF BAR4 memory.
PF BAR4 contains AF-PF mbox region followed by its VFs mbox region.
AF-PF mbox region base address is configured at RVU_AF_PFX_BAR4_ADDR
PF-VF mailbox base address is configured at
RVU_PF(x)_VF_MBOX_ADDR = RVU_AF_PF()_BAR4_ADDR+64KB. PF access its
mbox region via BAR4, whereas VF accesses PF-VF DRAM mailboxes via
BAR2 indirect access.
On CN9XX platform:
Mailbox region in DRAM is divided into two parts AF-PF mbox region and
PF-VF mbox region i.e all PFs mbox region is contiguous similarly all
VFs.
The base address of the AF-PF mbox region is configured at
RVU_AF_PF_BAR4_ADDR.
AF-PF1 mbox address can be calculated as RVU_AF_PF_BAR4_ADDR * mbox
size.
The base address of PF-VF mbox region for each PF is configure at
RVU_AF_PF(0..15)_VF_BAR4_ADDR.PF access its mbox region via BAR4 and its
VF mbox regions from RVU_PF_VF_BAR4_ADDR register, whereas VF access its
mbox region via BAR4.
This patch changes mbox initialization to support both CN9XX and CN10K
platform.
This patch also adds CN10K PTP subsystem and device IDs to ptp
driver id table.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Feb 2021 22:50:24 +0000 (14:50 -0800)]
Merge branch 'mvpp2-tx-flow-control'
Stefan Chulski says:
====================
net: mvpp2: Add TX Flow Control support
Armada hardware has a pause generation mechanism in GOP (MAC).
The GOP generate flow control frames based on an indication programmed in Ports Control 0 Register. There is a bit per port.
However assertion of the PortX Pause bits in the ports control 0 register only sends a one time pause.
To complement the function the GOP has a mechanism to periodically send pause control messages based on periodic counters.
This mechanism ensures that the pause is effective as long as the Appropriate PortX Pause is asserted.
Problem is that Packet Processor that actually can drop packets due to lack of resources not connected to the GOP flow control generation mechanism.
To solve this issue Armada has firmware running on CM3 CPU dedicated for Flow Control support.
Firmware monitors Packet Processor resources and asserts XON/XOFF by writing to Ports Control 0 Register.
MSS shared SRAM memory used to communicate between CM3 firmware and PP2 driver.
During init PP2 driver informs firmware about used BM pools, RXQs, congestion and depletion thresholds.
The pause frames are generated whenever congestion or depletion in resources is detected.
The back pressure is stopped when the resource reaches a sufficient level.
So the congestion/depletion and sufficient level implement a hysteresis that reduces the XON/XOFF toggle frequency.
Packet Processor v23 hardware introduces support for RX FIFO fill level monitor.
Patch "add PPv23 version definition" to differ between v23 and v22 hardware.
Patch "add TX FC firmware check" verifies that CM3 firmware supports Flow Control monitoring.
v12 --> v13
- Remove bm_underrun_protect module_param
v11 --> v12
- Improve warning message in "net: mvpp2: add TX FC firmware check" patch
v10 --> v11
- Improve "net: mvpp2: add CM3 SRAM memory map" comment
- Move condition check to 'net: mvpp2: always compare hw-version vs MVPP21' patch
v9 --> v10
- Add CM3 SRAM description to PPv2 documentation
v8 --> v9
- Replace generic pool allocation with devm_ioremap_resource
v7 --> v8
- Reorder "always compare hw-version vs MVPP21" and "add PPv23 version definition" commits
- Typo fixes
- Remove condition fix from "add RXQ flow control configurations"
v6 --> v7
- Reduce patch set from 18 to 15 patches
- Documentation change combined into a single patch
- RXQ and BM size change combined into a single patch
- Ring size change check moved into "add RXQ flow control configurations" commit
v5 --> v6
- No change
v4 --> v5
- Add missed Signed-off
- Fix warnings in patches 3 and 12
- Add revision requirement to warning message
- Move mss_spinlock into RXQ flow control configurations patch
- Improve FCA RXQ non occupied descriptor threshold commit message
v3 --> v4
- Remove RFC tag
v2 --> v3
- Remove inline functions
- Add PPv2.3 description into marvell-pp2.txt
- Improve mvpp2_interrupts_mask/unmask procedure
- Improve FC enable/disable procedure
- Add priv->sram_pool check
- Remove gen_pool_destroy call
- Reduce Flow Control timer to x100 faster
v1 --> v2
- Add memory requirements information
- Add EPROBE_DEFER if of_gen_pool_get return NULL
- Move Flow control configuration to mvpp2_mac_link_up callback
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Chulski [Thu, 11 Feb 2021 10:49:02 +0000 (12:49 +0200)]
net: mvpp2: add TX FC firmware check
Patch check that TX FC firmware is running in CM3.
If not, global TX FC would be disabled.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Chulski [Thu, 11 Feb 2021 10:49:01 +0000 (12:49 +0200)]
net: mvpp2: set 802.3x GoP Flow Control mode
This patch fix GMAC TX flow control autoneg.
Flow control autoneg wrongly were disabled with enabled TX
flow control.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Chulski [Thu, 11 Feb 2021 10:49:00 +0000 (12:49 +0200)]
net: mvpp2: add PPv23 RX FIFO flow control
New FIFO flow control feature was added in PPv23.
PPv2 FIFO polled by HW and trigger pause frame if FIFO
fill level is below threshold.
FIFO HW flow control enabled with CM3 RXQ&BM flow
control with ethtool.
Current FIFO thresholds is:
9KB for port with maximum speed 10Gb/s port
4KB for port with maximum speed 5Gb/s port
2KB for port with maximum speed 1Gb/s port
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Chulski [Thu, 11 Feb 2021 10:48:59 +0000 (12:48 +0200)]
net: mvpp2: add BM protection underrun feature support
The PP2v23 hardware supports a feature allowing to double the
size of BPPI by decreasing number of pools from 16 to 8.
Increasing of BPPI size protect BM drop from BPPI underrun.
Underrun could occurred due to stress on DDR and as result slow buffer
transition from BPPE to BPPI.
New BPPI threshold recommended by spec is:
BPPI low threshold - 640 buffers
BPPI high threshold - 832 buffers
Supported only in PPv23.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Chulski [Thu, 11 Feb 2021 10:48:58 +0000 (12:48 +0200)]
net: mvpp2: add ethtool flow control configuration support
This patch add ethtool flow control configuration support.
Tx flow control retrieved correctly by ethtool get function.
FW per port ethtool configuration capability added.
Patch also takes care about mtu change procedure, if PPv2 switch
BM pools during mtu change.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>