OSDN Git Service
mochel@digitalimplant.org [Fri, 25 Mar 2005 04:08:04 +0000 (20:08 -0800)]
[PATCH] Fix up bogus comment.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff -Nru a/drivers/base/driver.c b/drivers/base/driver.c
mochel@digitalimplant.org [Fri, 25 Mar 2005 03:08:30 +0000 (19:08 -0800)]
[PATCH] Use a klist for device child lists.
- Use klist iterator in device_for_each_child(), making it safe to use for
removing devices.
- Remove unused list_to_dev() function.
- Kills all usage of devices_subsys.rwsem.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Fri, 25 Mar 2005 23:52:00 +0000 (15:52 -0800)]
[PATCH] use device_for_each_child() to properly access child devices.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mochel@digitalimplant.org [Fri, 25 Mar 2005 03:03:59 +0000 (19:03 -0800)]
[PATCH] Use device_for_each_child() to unregister devices in scsi_remove_target().
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Index: gregkh-2.6/drivers/scsi/scsi_sysfs.c
===================================================================
mochel@digitalimplant.org [Fri, 25 Mar 2005 02:59:59 +0000 (18:59 -0800)]
[PATCH] Don't reference NULL klist pointer in klist_remove().
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff -Nru a/lib/klist.c b/lib/klist.c
mochel@digitalimplant.org [Fri, 25 Mar 2005 02:58:45 +0000 (18:58 -0800)]
[PATCH] Call klist_del() instead of klist_remove().
- Can't wait on removing the current item in the list (the positive refcount *because*
we are using it causes it to deadlock).
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mochel@digitalimplant.org [Thu, 24 Mar 2005 21:08:05 +0000 (13:08 -0800)]
[PATCH] Remove struct device::driver_list.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mochel@digitalimplant.org [Thu, 24 Mar 2005 21:03:35 +0000 (13:03 -0800)]
[PATCH] Remove struct device::bus_list.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mochel@digitalimplant.org [Thu, 24 Mar 2005 21:02:28 +0000 (13:02 -0800)]
[PATCH] Fix up bus code and remove use of rwsem.
- Don't add devices to bus's embedded kset, since it's not used by anyone anymore.
- Don't need to take the bus rwsem when calling {device,driver}_attach(), since
those functions use the klists and the klists' spinlocks.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mochel@digitalimplant.org [Thu, 24 Mar 2005 21:00:16 +0000 (13:00 -0800)]
[PATCH] Fix up USB to use klist_node_attached() instead of list_empty() on lists that will go away.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Index: gregkh-2.6/drivers/usb/core/usb.c
===================================================================
mochel@digitalimplant.org [Thu, 24 Mar 2005 20:58:57 +0000 (12:58 -0800)]
[PATCH] add klist_node_attached() to determine if a node is on a list or not.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff -Nru a/include/linux/klist.h b/include/linux/klist.h
mochel@digitalimplant.org [Thu, 24 Mar 2005 18:50:24 +0000 (10:50 -0800)]
[PATCH] Use bus_for_each_{dev,drv} for driver binding.
- Now possible, since the lists are locked using the klist lock and not the
global rwsem.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mochel@digitalimplant.org [Thu, 24 Mar 2005 18:48:35 +0000 (10:48 -0800)]
[PATCH] Remove the unused device_find().
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mochel@digitalimplant.org [Mon, 21 Mar 2005 20:25:36 +0000 (12:25 -0800)]
[PATCH] Add a klist to struct device_driver for the devices bound to it.
- Use it in driver_for_each_device() instead of the regular list_head and stop using
the bus's rwsem for protection.
- Use driver_for_each_device() in driver_detach() so we don't deadlock on the
bus's rwsem.
- Remove ->devices.
- Move klist access and sysfs link access out from under device's semaphore, since
they're synchronized through other means.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mochel@digitalimplant.org [Mon, 21 Mar 2005 20:00:18 +0000 (12:00 -0800)]
[PATCH] Add a klist to struct bus_type for its drivers.
- Use it in bus_for_each_drv().
- Use the klist spinlock instead of the bus rwsem.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mochel@digitalimplant.org [Mon, 21 Mar 2005 19:49:14 +0000 (11:49 -0800)]
[PATCH] Add a klist to struct bus_type for its devices.
- Use it for bus_for_each_dev().
- Use the klist spinlock instead of the bus rwsem.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mochel@digitalimplant.org [Mon, 21 Mar 2005 19:45:16 +0000 (11:45 -0800)]
[PATCH] Add initial implementation of klist helpers.
This klist interface provides a couple of structures that wrap around
struct list_head to provide explicit list "head" (struct klist) and
list "node" (struct klist_node) objects. For struct klist, a spinlock
is included that protects access to the actual list itself. struct
klist_node provides a pointer to the klist that owns it and a kref
reference count that indicates the number of current users of that node
in the list.
The entire point is to provide an interface for iterating over a list
that is safe and allows for modification of the list during the
iteration (e.g. insertion and removal), including modification of the
current node on the list.
It works using a 3rd object type - struct klist_iter - that is declared
and initialized before an iteration. klist_next() is used to acquire the
next element in the list. It returns NULL if there are no more items.
This klist interface provides a couple of structures that wrap around
struct list_head to provide explicit list "head" (struct klist) and
list "node" (struct klist_node) objects. For struct klist, a spinlock
is included that protects access to the actual list itself. struct
klist_node provides a pointer to the klist that owns it and a kref
reference count that indicates the number of current users of that node
in the list.
The entire point is to provide an interface for iterating over a list
that is safe and allows for modification of the list during the
iteration (e.g. insertion and removal), including modification of the
current node on the list.
It works using a 3rd object type - struct klist_iter - that is declared
and initialized before an iteration. klist_next() is used to acquire the
next element in the list. It returns NULL if there are no more items.
Internally, that routine takes the klist's lock, decrements the reference
count of the previous klist_node and increments the count of the next
klist_node. It then drops the lock and returns.
There are primitives for adding and removing nodes to/from a klist.
When deleting, klist_del() will simply decrement the reference count.
Only when the count goes to 0 is the node removed from the list.
klist_remove() will try to delete the node from the list and block
until it is actually removed. This is useful for objects (like devices)
that have been removed from the system and must be freed (but must wait
until all accessors have finished).
Internally, that routine takes the klist's lock, decrements the reference
count of the previous klist_node and increments the count of the next
klist_node. It then drops the lock and returns.
There are primitives for adding and removing nodes to/from a klist.
When deleting, klist_del() will simply decrement the reference count.
Only when the count goes to 0 is the node removed from the list.
klist_remove() will try to delete the node from the list and block
until it is actually removed. This is useful for objects (like devices)
that have been removed from the system and must be freed (but must wait
until all accessors have finished).
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff -Nru a/include/linux/klist.h b/include/linux/klist.h
mochel@digitalimplant.org [Mon, 21 Mar 2005 19:09:40 +0000 (11:09 -0800)]
[PATCH] Use driver_for_each_device() instead of manually walking list.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Index: gregkh-2.6/drivers/usb/core/usb.c
===================================================================
mochel@digitalimplant.org [Mon, 21 Mar 2005 19:07:54 +0000 (11:07 -0800)]
[PATCH] Use driver_for_each_device() in drivers/pnp/driver.c instead of manually walking list.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff -Nru a/drivers/pnp/driver.c b/drivers/pnp/driver.c
mochel@digitalimplant.org [Mon, 21 Mar 2005 18:59:56 +0000 (10:59 -0800)]
[PATCH] Add driver_for_each_device().
Now there's an iterator for accessing each device bound to a driver.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Index: linux-2.6.12-rc2/drivers/base/driver.c
===================================================================
mochel@digitalimplant.org [Mon, 21 Mar 2005 18:52:54 +0000 (10:52 -0800)]
[PATCH] Move device/driver code to drivers/base/dd.c
This relocates the driver binding/unbinding code to drivers/base/dd.c. This is done
for two reasons: One, it's not code related to the bus_type itself; it uses some from
that, some from devices, and some from drivers. And Two, it will make it easier to do
some of the upcoming lock removal on that code..
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mochel@digitalimplant.org [Mon, 21 Mar 2005 18:41:04 +0000 (10:41 -0800)]
[PATCH] Add a semaphore to struct device to synchronize calls to its driver.
This adds a per-device semaphore that is taken before every call from the core to a
driver method. This prevents e.g. simultaneous calls to the ->suspend() or ->resume()
and ->probe() or ->release(), potentially saving a whole lot of headaches.
It also moves us a step closer to removing the bus rwsem, since it protects the fields
in struct device that are modified by the core.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Morton [Thu, 5 May 2005 22:06:38 +0000 (15:06 -0700)]
[PATCH] fix up ipmi code after class_simple.c removal
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adrian Bunk [Thu, 5 May 2005 22:06:38 +0000 (15:06 -0700)]
[PATCH] fix "make mandocs" after class_simple.c removal
Due to the removal of class_simple.c, "make mandocs" no longer works.
This patch fixes this issue.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Wed, 23 Mar 2005 19:12:38 +0000 (11:12 -0800)]
[PATCH] class: remove class_simple code, as no one in the tree is using it anymore.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Wed, 23 Mar 2005 18:02:56 +0000 (10:02 -0800)]
[PATCH] class: add kerneldoc for the new class functions.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Wed, 23 Mar 2005 18:02:26 +0000 (10:02 -0800)]
[PATCH] class: convert the remaining class_simple users in the kernel to usee the new class api
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark M. Hoffman [Tue, 3 May 2005 03:35:45 +0000 (23:35 -0400)]
[PATCH] USB: trivial error path fix
Trivial fix to USB class-creation error path; please apply.
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Wed, 23 Mar 2005 18:01:41 +0000 (10:01 -0800)]
[PATCH] class: convert drivers/* to use the new class api instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Wed, 23 Mar 2005 17:56:34 +0000 (09:56 -0800)]
[PATCH] class: convert arch/* to use the new class api instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Wed, 23 Mar 2005 17:55:22 +0000 (09:55 -0800)]
[PATCH] class: convert drivers/scsi/* to use the new class api instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Wed, 23 Mar 2005 17:53:36 +0000 (09:53 -0800)]
[PATCH] class: convert drivers/ieee1394/* to use the new class api instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Wed, 23 Mar 2005 17:53:09 +0000 (09:53 -0800)]
[PATCH] class: convert drivers/char/* to use the new class api instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Wed, 23 Mar 2005 17:52:10 +0000 (09:52 -0800)]
[PATCH] class: convert drivers/block/* to use the new class api instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Wed, 23 Mar 2005 17:51:41 +0000 (09:51 -0800)]
[PATCH] class: convert sound/* to use the new class api instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Tue, 15 Mar 2005 23:10:13 +0000 (15:10 -0800)]
[PATCH] USB: move the usb hcd code to use the new class code.
This moves a kref into the main hcd structure, which detaches it from
the class device structure.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Tue, 15 Mar 2005 22:26:30 +0000 (14:26 -0800)]
[PATCH] INPUT: move to use the new class code, instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Tue, 15 Mar 2005 22:23:15 +0000 (14:23 -0800)]
[PATCH] tty: move to use the new class code, instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Tue, 15 Mar 2005 19:54:21 +0000 (11:54 -0800)]
[PATCH] CLASS: move a "simple" class logic into the class core.
One step on improving the class api so that it can not be used incorrectly.
This also fixes the module owner issue with the dev files that happened when
the devt logic moved to the class core.
Based on a patch originally written by Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Fri, 29 Apr 2005 06:27:34 +0000 (01:27 -0500)]
[PATCH] sysfs: (rest) if show/store is missing return -EIO
sysfs: fix the rest of the kernel so if an attribute doesn't
implement show or store method read/write will return
-EIO instead of 0 or -EINVAL or -EPERM.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Fri, 29 Apr 2005 06:26:06 +0000 (01:26 -0500)]
[PATCH] sysfs: (driver/block) if show/store is missing return -EIO
sysfs: fix drivers/block so if an attribute doesn't implement
show or store method read/write will return -EIO
instead of 0 or -EINVAL.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Fri, 29 Apr 2005 06:26:27 +0000 (01:26 -0500)]
[PATCH] sysfs: (driver/pci) if show/store is missing return -EIO
sysfs: fix drivers/pci so if an attribute does not implement
show or store method read/write will return -EIO
instead of 0.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Fri, 29 Apr 2005 06:23:47 +0000 (01:23 -0500)]
[PATCH] sysfs: (driver/base) if show/store is missing return -EIO
sysfs: fix drivers/base so if an attribute doesn't implement
show or store method read/write will return -EIO
instead of 0.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Fri, 29 Apr 2005 06:22:00 +0000 (01:22 -0500)]
[PATCH] sysfs: if show/store is missing return -EIO
sysfs: if attribute does not implement show or store method
read/write should return -EIO instead of 0 or -EINVAL.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Fri, 29 Apr 2005 05:58:46 +0000 (00:58 -0500)]
[PATCH] Make attributes names const char *
sysfs: make attributes and attribute_group's names const char *
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Tue, 26 Apr 2005 07:34:05 +0000 (02:34 -0500)]
[PATCH] make driver's name be const char *
Driver core:
change driver's, bus's, class's and platform device's names
to be const char * so one can use
const char *drv_name = "asdfg";
when initializing structures.
Also kill couple of whitespaces.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Tue, 26 Apr 2005 07:32:54 +0000 (02:32 -0500)]
[PATCH] kset_hotplug_ops->name shoudl return const char *
kobject: change name() method in kset_hotplug_ops return const char *
since users shoudl not try to modify returned data.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Tue, 26 Apr 2005 07:32:00 +0000 (02:32 -0500)]
[PATCH] Make kobject's name be const char *
kobject: make kobject's name const char * since users should not
attempt to change it (except by calling kobject_rename).
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Tue, 26 Apr 2005 07:31:08 +0000 (02:31 -0500)]
[PATCH] sysfs_{create|remove}_link should take const char *
sysfs: make sysfs_{create|remove}_link to take const char * name.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Tue, 26 Apr 2005 07:29:58 +0000 (02:29 -0500)]
[PATCH] kobject_hotplug() should use kobject_name()
kobject: kobject_hotplug should use kobject_name() instead of
accessing kobj->name directly since for objects with
long names it can contain garbage.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Sun, 19 Jun 2005 18:53:06 +0000 (11:53 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
Russell King [Sun, 19 Jun 2005 18:26:54 +0000 (19:26 +0100)]
Merge with ../linux-2.6-smp
Russell King [Sun, 19 Jun 2005 17:39:33 +0000 (18:39 +0100)]
[PATCH] ARM SMP: Fix PXA/SA11x0 suspend resume crash
We need to re-initialise the stack pointers for undefined, IRQ
and abort mode handlers whenever we resume.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 19 Jun 2005 08:52:07 +0000 (09:52 +0100)]
[PATCH] ARM SMP: Add missed files from Integrator/CP platform
Add missed new files from basic SMP support for the Integrator/CP platform.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
David S. Miller [Sun, 19 Jun 2005 06:01:10 +0000 (23:01 -0700)]
[TCP]: Fix sysctl_tcp_low_latency
When enabled, this should disable UCOPY prequeue'ing altogether,
but it does not due to a missing test.
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Sun, 19 Jun 2005 06:00:34 +0000 (23:00 -0700)]
[IPV4]: [4/4] signed vs unsigned cleanup in net/ipv4/raw.c
This patch changes the type of the third parameter 'length' of the
raw_send_hdrinc() function from 'int' to 'size_t'.
This makes sense since this function is only ever called from one
location, and the value passed as the third parameter in that location is
itself of type size_t, so this makes the recieving functions parameter
type match. Also, inside raw_send_hdrinc() the 'length' variable is
used in comparisons with unsigned values and passed as parameter to
functions expecting unsigned values (it's used in a single comparison with
a signed value, but that one can never actually be negative so the patch
also casts that one to size_t to stop gcc worrying, and it is passed in a
single instance to memcpy_fromiovecend() which expects a signed int, but
as far as I can see that's not a problem since the value of 'length'
shouldn't ever exceed the value of a signed int).
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Sun, 19 Jun 2005 06:00:15 +0000 (23:00 -0700)]
[IPV4]: [3/4] signed vs unsigned cleanup in net/ipv4/raw.c
This patch changes the type of the local variable 'i' in
raw_probe_proto_opt() from 'int' to 'unsigned int'. The only use of 'i' in
this function is as a counter in a for() loop and subsequent index into
the msg->msg_iov[] array.
Since 'i' is compared in a loop to the unsigned variable msg->msg_iovlen
gcc -W generates this warning :
net/ipv4/raw.c:340: warning: comparison between signed and unsigned
Changing 'i' to unsigned silences this warning and is safe since the array
index can never be negative anyway, so unsigned int is the logical type to
use for 'i' and also enables a larger msg_iov[] array (but I don't know if
that will ever matter).
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Sun, 19 Jun 2005 06:00:00 +0000 (23:00 -0700)]
[IPV4]: [2/4] signed vs unsigned cleanup in net/ipv4/raw.c
This patch gets rid of the following gcc -W warning in net/ipv4/raw.c :
net/ipv4/raw.c:387: warning: comparison of unsigned expression < 0 is always false
Since 'len' is of type size_t it is unsigned and can thus never be <0, and
since this is obvious from the function declaration just a few lines above
I think it's ok to remove the pointless check for len<0.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Juhl [Sun, 19 Jun 2005 05:59:45 +0000 (22:59 -0700)]
[IPV4]: [1/4] signed vs unsigned cleanup in net/ipv4/raw.c
This patch silences these two gcc -W warnings in net/ipv4/raw.c :
net/ipv4/raw.c:517: warning: signed and unsigned type in conditional expression
net/ipv4/raw.c:613: warning: signed and unsigned type in conditional expression
It doesn't change the behaviour of the code, simply writes the conditional
expression with plain 'if()' syntax instead of '? :' , but since this
breaks it into sepperate statements gcc no longer complains about having
both a signed and unsigned value in the same conditional expression.
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:59:08 +0000 (22:59 -0700)]
[PKT_SCHED]: noop/noqueue qdisc style cleanups
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:58:53 +0000 (22:58 -0700)]
[PKT_SCHED]: Cleanup pfifo_fast qdisc and remove unnecessary code
Removes the skb trimming code which is not needed since we never
touch the skb upon failure. Removes unnecessary initializers,
and simplifies the code a bit.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:58:35 +0000 (22:58 -0700)]
[PKT_SCHED]: Add and use prio2list() in the pfifo_fast qdisc
prio2list() returns the relevant sk_buff_head for the
band specified by the priority for a given skb.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:58:15 +0000 (22:58 -0700)]
[PKT_SCHED]: Transform pfifo_fast to use generic queue management interface
Gives pfifo_fast a byte based backlog.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:58:00 +0000 (22:58 -0700)]
[PKT_SCHED]: Cleanup fifo qdisc and remove unnecessary code
Removes the skb trimming code which is not needed since we never
touch the skb upon failure. Removes unnecessary includes,
initializers, and simplifies the code a bit.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:57:42 +0000 (22:57 -0700)]
[PKT_SCHED]: Transform fifo qdisc to use generic queue management interface
The simplicity of the fifo qdisc allows several qdisc operations to be
redirected to the relevant queue management function directly. Saves
a lot of code lines and gives the pfifo a byte based backlog.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:57:26 +0000 (22:57 -0700)]
[PKT_SCHED]: Generic queue management interface for qdiscs using internal skb queues
Implements an interface to be used by leaf qdiscs maintaining an internal
skb queue. The interface maintains a backlog in bytes additionaly
to the skb_queue_len() maintained by the queue itself. Relevant statistics
get incremented automatically. Every function comes in two variants, one
assuming Qdisc->q is used as queue and the second taking a sk_buff_head
as argument. Be aware that, if you use multiple queues, you still have to
maintain the Qdisc->q.qlen counter yourself.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sun, 19 Jun 2005 05:56:42 +0000 (22:56 -0700)]
[SCTP]: Replace spin_lock_irqsave with spin_lock_bh
This patch replaces the spin_lock_irqsave call on the receive queue
lock in SCTP with spin_lock_bh. Despite the proliferation of
spin_lock_irqsave calls in this stack, it is only entered from the
IPv4/IPv6 stack and user space. That is, it is never entered from
hardirq context.
The call in question is only called from recvmsg which means that
IRQs aren't disabled. Therefore it is safe to replace it with
spin_lock_bh.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sun, 19 Jun 2005 05:56:18 +0000 (22:56 -0700)]
[IPV4/IPV6]: Replace spin_lock_irq with spin_lock_bh
In light of my recent patch to net/ipv4/udp.c that replaced the
spin_lock_irq calls on the receive queue lock with spin_lock_bh,
here is a similar patch for all other occurences of spin_lock_irq
on receive/error queue locks in IPv4 and IPv6.
In these stacks, we know that they can only be entered from user
or softirq context. Therefore it's safe to disable BH only.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Sun, 19 Jun 2005 05:55:51 +0000 (22:55 -0700)]
[NETLINK]: Set correct pid for ioctl originating netlink events
This patch ensures that netlink events created as a result of programns
using ioctls (such as ifconfig, route etc) contains the correct PID of
those events.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Sun, 19 Jun 2005 05:55:31 +0000 (22:55 -0700)]
[NETLINK]: Explicit typing
This patch converts "unsigned flags" to use more explict types like u16
instead and incrementally introduces NLMSG_NEW().
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:55:02 +0000 (22:55 -0700)]
[DECNET]: Remove unnecessary initilization of unused variable entries
This patch was supposed to be part of the neighbour tables related
patchset but apparently got lost.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sun, 19 Jun 2005 05:54:36 +0000 (22:54 -0700)]
[IPSEC]: Add XFRMA_SA/XFRMA_POLICY for delete notification
This patch changes the format of the XFRM_MSG_DELSA and
XFRM_MSG_DELPOLICY notification so that the main message
sent is of the same format as that received by the kernel
if the original message was via netlink. This also means
that we won't lose the byid information carried in km_event.
Since this user interface is introduced by Jamal's patch
we can still afford to change it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Sun, 19 Jun 2005 05:54:12 +0000 (22:54 -0700)]
[NETLINK]: Correctly set NLM_F_MULTI without checking the pid
This patch rectifies some rtnetlink message builders that derive the
flags from the pid. It is now explicit like the other cases
which get it right. Also fixes half a dozen dumpers which did not
set NLM_F_MULTI at all.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:53:48 +0000 (22:53 -0700)]
[NETLINK]: Introduce NLMSG_NEW macro to better handle netlink flags
Introduces a new macro NLMSG_NEW which extends NLMSG_PUT but takes
a flags argument. NLMSG_PUT stays there for compatibility but now
calls NLMSG_NEW with flags == 0. NLMSG_PUT_ANSWER is renamed to
NLMSG_NEW_ANSWER which now also takes a flags argument.
Also converts the users of NLMSG_PUT_ANSWER to use NLMSG_NEW_ANSWER
and fixes the two direct users of __nlmsg_put to either provide
the flags or use NLMSG_NEW(_ANSWER).
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:53:29 +0000 (22:53 -0700)]
[PKT_SCHED]: Logic simplifications and codingstyle/whitespace cleanups
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:53:12 +0000 (22:53 -0700)]
[PKT_SCHED]: Make dsmark use the new dumping macros
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:52:54 +0000 (22:52 -0700)]
[PKT_SCHED]: Fix dsmark to apply changes consistent
Fixes dsmark to do all configuration sanity checks first and
only apply the changes if all of them can be applied without
any errors. Also fixes the weak sanity checks for DSMARK_VALUE
and DSMASK_MASK.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:52:36 +0000 (22:52 -0700)]
[RTNETLINK]: Add RTA_(PUT|GET) shortcuts for u8, u16, and flag
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:52:09 +0000 (22:52 -0700)]
[NEIGH]: Fix use of uninitialized variable when trimming in neightbl_fill_parms
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:51:43 +0000 (22:51 -0700)]
[NETLINK]: Kill bogus NLMSG_SET_MULTIPART uses.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:51:26 +0000 (22:51 -0700)]
[NETLINK]: Fix RTA_NEST_CANCEL().
Only skb_trim() if 'start' is non-NULL.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:51:12 +0000 (22:51 -0700)]
[NEIGHBOUR]: Remove unused fields in struct neigh_parms and neigh_table
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:50:55 +0000 (22:50 -0700)]
[NETLINK]: Neighbour table configuration and statistics via rtnetlink
To retrieve the neighbour tables send RTM_GETNEIGHTBL with the
NLM_F_DUMP flag set. Every neighbour table configuration is
spread over multiple messages to avoid running into message
size limits on systems with many interfaces. The first message
in the sequence transports all not device specific data such as
statistics, configuration, and the default parameter set.
This message is followed by 0..n messages carrying device
specific parameter sets.
Although the ordering should be sufficient, NDTA_NAME can be
used to identify sequences. The initial message can be identified
by checking for NDTA_CONFIG. The device specific messages do
not contain this TLV but have NDTPA_IFINDEX set to the
corresponding interface index.
To change neighbour table attributes, send RTM_SETNEIGHTBL
with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3],
NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked
otherwise. Device specific parameter sets can be changed by
setting NDTPA_IFINDEX to the interface index of the corresponding
device.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:50:38 +0000 (22:50 -0700)]
[NETLINK] Routing attribute related shortcuts
RTA_GET_U(32|64)(tlv)
Assumes TLV is a u32/u64 field and returns its value.
RTA_GET_[M]SECS(tlv)
Assumes TLV is a u64 and transports jiffies converted
to seconds or milliseconds and returns its value.
RTA_PUT_U(32|64)(skb, type, value)
Appends %value as fixed u32/u64 to %skb as TLV %type.
RTA_PUT_[M]SECS(skb, type, jiffies)
Converts %jiffies to secs/msecs and appends it as u64
to %skb as TLV %type.
RTA_PUT_STRING(skb, type, string)
Appends %NUL terminated %string to %skb as TLV %type.
RTA_NEST(skb, type)
Starts a nested TLV %type and returns the nesting handle.
RTA_NEST_END(skb, nesting_handle)
Finishes the nested TLV %nesting_handle, must be called
symmetric to RTA_NEST(). Returns skb->len
RTA_NEST_CANCEL(skb, nesting_handle)
Cancel the nested TLV %nesting_handle and trim nested TLV
from skb again, returns -1.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 19 Jun 2005 05:50:12 +0000 (22:50 -0700)]
[NETLINK]: New message building macros
NLMSG_PUT_ANSWER(skb, nlcb, type, length)
Start a new netlink message as answer to a request,
returns the message header.
NLMSG_END(skb, nlh)
End a netlink message, fixes total message length,
returns skb->len.
NLMSG_CANCEL(skb, nlh)
Cancel the building process and trim whole message
from skb again, returns -1.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 19 Jun 2005 05:49:40 +0000 (22:49 -0700)]
[NET]: Move sysctl_max_syn_backlog into request_sock.c
This fixes the CONFIG_INET=n build failure noticed
by Andrew Morton.
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Sun, 19 Jun 2005 05:48:55 +0000 (22:48 -0700)]
[NET] rename struct tcp_listen_opt to struct listen_sock
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Sun, 19 Jun 2005 05:47:59 +0000 (22:47 -0700)]
[NET] Generalise tcp_listen_opt
This chunks out the accept_queue and tcp_listen_opt code and moves
them to net/core/request_sock.c and include/net/request_sock.h, to
make it useful for other transport protocols, DCCP being the first one
to use it.
Next patches will rename tcp_listen_opt to accept_sock and remove the
inline tcp functions that just call a reqsk_queue_ function.
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Sun, 19 Jun 2005 05:47:21 +0000 (22:47 -0700)]
[NET] Rename open_request to request_sock
Ok, this one just renames some stuff to have a better namespace and to
dissassociate it from TCP:
struct open_request -> struct request_sock
tcp_openreq_alloc -> reqsk_alloc
tcp_openreq_free -> reqsk_free
tcp_openreq_fastfree -> __reqsk_free
With this most of the infrastructure closely resembles a struct
sock methods subset.
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Sun, 19 Jun 2005 05:46:52 +0000 (22:46 -0700)]
[NET] Generalise TCP's struct open_request minisock infrastructure
Kept this first changeset minimal, without changing existing names to
ease peer review.
Basicaly tcp_openreq_alloc now receives the or_calltable, that in turn
has two new members:
->slab, that replaces tcp_openreq_cachep
->obj_size, to inform the size of the openreq descendant for
a specific protocol
The protocol specific fields in struct open_request were moved to a
class hierarchy, with the things that are common to all connection
oriented PF_INET protocols in struct inet_request_sock, the TCP ones
in tcp_request_sock, that is an inet_request_sock, that is an
open_request.
I.e. this uses the same approach used for the struct sock class
hierarchy, with sk_prot indicating if the protocol wants to use the
open_request infrastructure by filling in sk_prot->rsk_prot with an
or_calltable.
Results? Performance is improved and TCP v4 now uses only 64 bytes per
open request minisock, down from 96 without this patch :-)
Next changeset will rename some of the structs, fields and functions
mentioned above, struct or_calltable is way unclear, better name it
struct request_sock_ops, s/struct open_request/struct request_sock/g,
etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Sun, 19 Jun 2005 05:46:19 +0000 (22:46 -0700)]
[SLAB] Introduce kmem_cache_name
This is for use with slab users that pass a dynamically allocated slab name in
kmem_cache_create, so that before destroying the slab one can retrieve the name
and free its memory.
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Sun, 19 Jun 2005 05:45:56 +0000 (22:45 -0700)]
[IPSEC] Use NLMSG_LENGTH in xfrm_exp_state_notify
Small fixup to use netlink macros instead of hardcoding.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Sun, 19 Jun 2005 05:45:31 +0000 (22:45 -0700)]
[IPSEC] Fix xfrm_state leaks in error path
Herbert Xu wrote:
> @@ -1254,6 +1326,7 @@ static int pfkey_add(struct sock *sk, st
> if (IS_ERR(x))
> return PTR_ERR(x);
>
> + xfrm_state_hold(x);
This introduces a leak when xfrm_state_add()/xfrm_state_update()
fail. We hold two references (one from xfrm_state_alloc(), one
from xfrm_state_hold()), but only drop one. We need to take the
reference because the reference from xfrm_state_alloc() can
be dropped by __xfrm_state_delete(), so the fix is to drop both
references on error. Same problem in xfrm_user.c.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sun, 19 Jun 2005 05:44:37 +0000 (22:44 -0700)]
[IPSEC] Use XFRM_MSG_* instead of XFRM_SAP_*
This patch removes XFRM_SAP_* and converts them over to XFRM_MSG_*.
The netlink interface is meant to map directly onto the underlying
xfrm subsystem. Therefore rather than using a new independent
representation for the events we can simply use the existing ones
from xfrm_user.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sun, 19 Jun 2005 05:44:18 +0000 (22:44 -0700)]
[IPSEC] Set byid for km_event in xfrm_get_policy
This patch fixes policy deletion in xfrm_user so that it sets
km_event.data.byid. This puts xfrm_user on par with what af_key
does in this case.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sun, 19 Jun 2005 05:44:00 +0000 (22:44 -0700)]
[IPSEC] Turn km_event.data into a union
This patch turns km_event.data into a union. This makes code that
uses it clearer.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sun, 19 Jun 2005 05:43:43 +0000 (22:43 -0700)]
[IPSEC] Fix xfrm to pfkey SA state conversion
This patch adjusts the SA state conversion in af_key such that
XFRM_STATE_ERROR/XFRM_STATE_DEAD will be converted to SADB_STATE_DEAD
instead of SADB_STATE_DYING.
According to RFC 2367, SADB_STATE_DYING SAs can be turned into
mature ones through updating their lifetime settings. Since SAs
which are in the states XFRM_STATE_ERROR/XFRM_STATE_DEAD cannot
be resurrected, this value is unsuitable.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Sun, 19 Jun 2005 05:43:22 +0000 (22:43 -0700)]
[IPSEC] Kill spurious hard expire messages
This patch ensures that the hard state/policy expire notifications are
only sent when the state/policy is successfully removed from their
respective tables.
As it is, it's possible for a state/policy to both expire through
reaching a hard limit, as well as being deleted by the user.
Note that this behaviour isn't actually forbidden by RFC 2367.
However, it is a quality of implementation issue.
As an added bonus, the restructuring in this patch will help
eventually in moving the expire notifications from softirq
context into process context, thus improving their reliability.
One important side-effect from this change is that SAs reaching
their hard byte/packet limits are now deleted immediately, just
like SAs that have reached their hard time limits.
Previously they were announced immediately but only deleted after
30 seconds.
This is bad because it prevents the system from issuing an ACQUIRE
command until the existing state was deleted by the user or expires
after the time is up.
In the scenario where the expire notification was lost this introduces
a 30 second delay into the system for no good reason.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jamal Hadi Salim [Sun, 19 Jun 2005 05:42:13 +0000 (22:42 -0700)]
[IPSEC] Add complete xfrm event notification
Heres the final patch.
What this patch provides
- netlink xfrm events
- ability to have events generated by netlink propagated to pfkey
and vice versa.
- fixes the acquire lets-be-happy-with-one-success issue
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds [Sat, 18 Jun 2005 23:06:50 +0000 (16:06 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm