OSDN Git Service
Shahar S Matityahu [Thu, 4 Jul 2019 14:53:52 +0000 (17:53 +0300)]
iwlwifi: fw api: add DRAM buffer allocation command
Add support code to be able to use the DRAM buffer allocation command,
which allows us to send information about a buffer to the firmware
to use it with the DBGC hardware.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Mon, 22 Jul 2019 10:04:16 +0000 (13:04 +0300)]
iwlwifi: dbg_ini: remove apply point, switch to time point API
Remove the "apply points" mechanism as preparation for the changed
debug API where this is now a "time point" instead. Use a new API
across the code at the trigger points ("time points"), but don't
yet implement it since that requires some more preparation.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Mon, 22 Jul 2019 09:40:51 +0000 (12:40 +0300)]
iwlwifi: add iwl_tlv_array_len()
Allows to easily calculate array length at the end of a TLV.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Tue, 23 Jul 2019 09:54:15 +0000 (12:54 +0300)]
iwlwifi: mvm: don't log un-decrypted frames
Sometimes the firmware won't be able to decrypt frames
because the keys were not installed yet or other scenarios.
The firmware will soon stop dropping multicast frames when
MAC_FILTER_ACCEPT_GRP is not set. The firmware will simply
always pass multicast frame in.
In order to avoid logging any such frame coming in when we
don't have the keys, drop the print.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Haim Dreyfuss [Mon, 22 Jul 2019 13:45:21 +0000 (16:45 +0300)]
iwlwifi: mvm: add support for single antenna diversity
There are products which have a single chain with 2 antennas.
In these products, we need to inform the FW that the device has the
single antenna diversity(SAD) feature. In the future, we will read
the active antenna from a BIOS configuration. Currently, we use a
default configuration which means that the FW decides which antenna to use.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Thu, 4 Jul 2019 15:24:47 +0000 (17:24 +0200)]
iwlwifi: mvm: handle BAR_FRAME_RELEASE (0xc2) notification
In prior hardware generations (e.g. 9000 series), we received the BAR
frame with fake NSSN information to handle releasing frames from the
reorder buffer for the default queue, the other queues were getting
the FRAME_RELEASE notification in this case.
With multi-TID block-ack, the firmware no longer sends us the BAR
frame because the fake RX is quite big (just the metadata is around
48 bytes or so). Instead, it now sends us one (or multiple) special
release notifications (0xc2). The hardware consumes these as well,
but only generates the FRAME_RELEASE (0xc3) for queues other than
the default queue. We thus need to handle them in the same way we
handle the normal FRAME_RELEASE.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Tue, 16 Jul 2019 12:57:18 +0000 (14:57 +0200)]
iwlwifi: mvm: drop BA sessions on too many old-SN frames
Certain APs (I think a certain Broadcom model) interact badly with our
full state BA bitmap handling, and if triggered badly with many powersave
transitions they keep sending frames from before the window, which our
hardware then doesn't appear to ACK (to them) since it has moved on and
is sending ACKs for higher SNs now.
Try to detect this situation and if this keeps happening, disable the
aggregation session.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Haim Dreyfuss [Tue, 16 Jul 2019 09:44:40 +0000 (12:44 +0300)]
iwlwifi: add sta_id to WOWLAN_CONFIG_CMD
WoWlan feature within the FW uses the station id for various of reasons.
Thus we need to add this information to the command.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Haim Dreyfuss [Wed, 3 Apr 2019 11:37:54 +0000 (14:37 +0300)]
iwlwifi: add support for suspend-resume flow for new device generation
The new device generation has a slightly different suspend resume flow
Currently, the way the driver instruct the device to move to D3 is by
sending D3_CONFIG_CMD.
Instead of using the host command the indication is by writing to the
doorbell interrupt.
The FW will respond with interrupt to indicate transition completion.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Hariprasad Kelam [Sun, 26 May 2019 11:38:16 +0000 (17:08 +0530)]
iwlwifi: fix warning iwl-trans.h is included more than once
Remove duplicate inclusion of iwl-trans.h.
This issue was found by includecheck.
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Fri, 12 Jul 2019 12:52:39 +0000 (15:52 +0300)]
iwlwifi: always access the trans configuration via trans
Stop accessing the trans configuration via the iwl_cfg structure and
always access it via the iwl_trans structure. This completes the
requirements to disassociate the trans-specific configuration from the
rest of the configuration.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shaul Triebitz [Mon, 21 May 2018 22:39:23 +0000 (18:39 -0400)]
iwlwifi: pass the iwl_trans instead of cfg to some functions
A few functions were receiving the iwl_cfg struct directly, but we
will also need other parts of the trans, so pass the trans (which
includes the cfg) to them.
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Fri, 12 Jul 2019 12:03:48 +0000 (15:03 +0300)]
iwlwifi: add a pointer to the trans_cfg directly in trans
Add a pointer to the iwl_trans structure and point it to the trans
part of the cfg. This is the first step in disassociating the trans
configuration from the rest of the configuration.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Fri, 3 Aug 2018 10:24:18 +0000 (13:24 +0300)]
iwlwifi: pass the iwl_config_trans_params when needed
Instead of accessing the iwl_config_trans_params from the cfg that is
stored in the trans struct, pass this structure directly to functions
that need it during trans_alloc. This will be useful to isolate the
elements needed during allocation and pass them separately before the
actual cfg struct is known.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Thu, 2 Aug 2018 13:24:53 +0000 (16:24 +0300)]
iwlwifi: pcie: set iwl_trans->cfg later in the probe function
Instead of setting the cfg to iwl_trans already during allocation, set
it only later when we have had the time to decide which cfg to use.
This is part of the effort to be able to decide the cfg based on HW
revision and RF ID after iwl_trans_alloc() has been called.
For now, since we still have a bunch of code checking the HW revision
and the RF ID, we set iwl_trans->cfg early, even before we decided the
real cfg to use. We only use the trans configuration at this point,
so this is fine for now. In the future, the trans configuration will
be completely independent from the rest of the config structure, so
we'll be able to avoid this.
Additionally, we can't access the PRPH registers in iwl_trans_alloc()
anymore, so move the HW REV C-step check for family 8000 code later to
the probe function as well. This step is probably not necessary, but
if that's the case it should be removed separately later on.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Thu, 2 Aug 2018 14:08:40 +0000 (17:08 +0300)]
iwlwifi: pcie: move some cfg mangling from trans_pcie_alloc to probe
There were a couple of special handling to find the correct cfg inside
iwl_trans_pcie_alloc(). Move them to iwl_pci_probe() so they're
together with the rest of the decisions.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Thu, 2 Aug 2018 13:16:27 +0000 (16:16 +0300)]
iwlwifi: pcie: use the cfg we passed to iwl_trans_pcie_alloc()
Instead of using iwl_trans->cfg in iwl_trans_pcie_alloc(), use the
local argument that we received. This will allow us to not to set the
cfg during iwl_trans_alloc() so it can be decided later.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Thu, 2 Aug 2018 11:57:55 +0000 (14:57 +0300)]
iwlwifi: separate elements from cfg that are needed by trans_alloc
In order to be able to select the cfg depending on the HW revision or
on the RF ID, we need to set up the trans before selecting the cfg.
To do so, move the elements from cfg that are needed by
iwl_trans_alloc() to a separate struct at the top of the cfg, so it
can be used by other cfg types as well, before selecting the rest of
the configuration.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Tue, 18 Jun 2019 05:24:21 +0000 (08:24 +0300)]
iwlwifi: dbg_ini: use regions ops array instead of switch case in dump flow
Make a static regions ops array and use it instead of switch case when
determining what op to use to collect a region.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Mon, 17 Jun 2019 14:16:36 +0000 (17:16 +0300)]
iwlwifi: dbg_ini: make a single ops struct for paging collect
Needed for future changes.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Mon, 17 Jun 2019 11:51:51 +0000 (14:51 +0300)]
iwlwifi: dbg_ini: move tx fifo data into fw runtime
Needed for future changes.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Sun, 16 Jun 2019 14:05:21 +0000 (17:05 +0300)]
iwlwifi: dbg_ini: use linked list for dump TLVs during dump creation
Avoid iterating over dump TLVs twice for size calculation by using
linked list to store the dump TLVs.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Thu, 13 Jun 2019 13:41:35 +0000 (16:41 +0300)]
iwlwifi: dbg_ini: separate cfg and dump flows to different modules
separate configuration flows and dump collection flows.
make ini configuration flows be in iwl-dbg-tlv.c and dump related flows
in dbg.c to better reflect their logical difference.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Tova Mussai [Thu, 4 Jul 2019 11:34:54 +0000 (14:34 +0300)]
iwlwifi: mvm: look for the first supported channel when add/remove phy ctxt
Can't rely that band 2.4 is always supported by the NIC and use the
first channel in this band for the phy ctxt.
Instead, look for the first channel in the first band that is supported
Signed-off-by: Tova Mussai <tova.mussai@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Tova Mussai [Thu, 4 Jul 2019 10:41:01 +0000 (13:41 +0300)]
iwlwifi: allocate bigger nvm data in case of UHB
In case of Ultra-high-band (UHB), need to allocate nvm data structure in
size of UHB channels array.
Signed-off-by: Tova Mussai <tova.mussai@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Wed, 10 Jul 2019 12:00:18 +0000 (15:00 +0300)]
iwlwifi: remove unnecessary IWL_DEVICE_AX200_COMMON definition
Remove the IWL_DEVICE_AX200_COMMON definition, since it's only used
once and relies mostly on IWL_DEVICE_22000_COMMON anyway.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Mon, 27 May 2019 12:12:52 +0000 (15:12 +0300)]
iwlwifi: dbg: align wrt log prints to the same format
Align wrt log prints to the driver coding style
Remove the ext field from the log and print it at the beginning of the
apply point.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Sun, 30 Jun 2019 13:36:36 +0000 (16:36 +0300)]
iwlwifi: dbg_ini: remove debug flow TLV
Debug flow TLV was removed from the FW. Remove the TLV from the driver
as well.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Sun, 30 Jun 2019 07:23:26 +0000 (10:23 +0300)]
iwlwifi: dbg_ini: verify debug TLVs at allocation phase
Reimplement debug TLV allocation flow. The driver will check the
validity of the debug TLVs prior allocating space for them.
Any malformed or unsupported TLV will be skipped.
The TLV specific checks will be added in later patches.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Sun, 30 Jun 2019 06:31:22 +0000 (09:31 +0300)]
iwlwifi: dbg_ini: use function to check if ini dbg mode is on
use iwl_trans_dbg_ini_valid function instead of a boolean value check if
dbg_ini mode is on. It is needed for a future patch.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Mon, 8 Jul 2019 09:20:01 +0000 (12:20 +0300)]
iwlwifi: remove duplicate FW string definitions
The string we define as IWL_22000_HR_B_F0_FW_PRE is duplicate with
IWL_22000_QU_B_HR_B_FW_PRE. Remove the former to avoid confusion.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Wed, 10 Apr 2019 06:23:39 +0000 (09:23 +0300)]
iwlwifi: bump FW API to 50 for 22000 series
Start supporting API version 50 for 22000 series.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Fri, 5 Jul 2019 11:53:30 +0000 (13:53 +0200)]
iwlwifi: api: fix FTM struct documentation
The real name is struct iwl_tof_range_req_ext_cmd, fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Gil Adam [Sun, 16 Jun 2019 10:18:28 +0000 (13:18 +0300)]
iwlwifi: support per-platform antenna gain
TX power limits as defined in the OTP assume the worst case scenario
in terms of the platform's atenna gain, but most platforms are below
that value so they can use more TX power without passing the regulatory
limit. If the platform indicates in the BIOS that it indeed has lower
gain, and the geographic location allows it, higher TX power can be
used. The driver reads the PPAG (Per-Platform Antenna Gain) data from
BIOS (if it exists), validates it and sends the appropriate command to
the FW. This flow happens once at FW init, in case of suspend/resume
there is no need to read again from BIOS as we save those values during
init, so just send the PPAG command again to FW.
Signed-off-by: Gil Adam <gil.adam@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Tue, 2 Jul 2019 12:18:47 +0000 (15:18 +0300)]
iwlwifi: mvm: remove check for lq_sta in __iwl_mvm_rs_tx_status()
The check is not necessary anymore, because now the struct is not
allocated separately, but is part of the mvmsta struct. Remove the
check, since it's dead code.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Sun, 30 Jun 2019 12:40:19 +0000 (15:40 +0300)]
iwlwifi: mvm: simplify the channel switch flow for newer firmware
Any firmware that supports the new channel switch flow is
able to close / re-open the queues when needed. It takes
into account the channel switch mode etc...
Don't open / close the queues or enable / disable beacon
abort before and after the channel switch in case the
firmware is able to do this by itself.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Christoph Hellwig [Fri, 14 Jun 2019 13:47:20 +0000 (15:47 +0200)]
iwlwifi: stop passing bogus gfp flags arguments to dma_alloc_coherent
dma_alloc_coherent is not just the page allocator. The only valid
arguments to pass are either GFP_ATOMIC or GFP_ATOMIC with possible
modifiers of __GFP_NORETRY or __GFP_NOWARN.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Tue, 18 Jun 2019 05:31:58 +0000 (08:31 +0300)]
iwlwifi: dbg_ini: remove periphery phy and aux regions handling
periphery phy and aux regions should not be collected like periphery mac
region. Remove their handling. The handling will be added in the future
once the FW will support it.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Fixes:
7a14c23dcdee ("iwlwifi: dbg: dump data according to the new ini TLVs")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Mon, 10 Jun 2019 13:14:20 +0000 (16:14 +0300)]
iwlwifi: dbg_ini: use linked list to store debug TLVs
Use a linked list to maintain the debug TLVs instead of a single buffer.
This way, the driver does not need to iterate over the binary file twice
and allocates smaller chunks of memory. Also, in case one allocation
fails the driver will work with the partial configuration instead of
aborting the entire debug configuration.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Thu, 13 Jun 2019 05:29:55 +0000 (08:29 +0300)]
iwlwifi: dbg_ini: maintain buffer allocations from trans instead of TLVs buffer
Maintain DRAM debug buffer status in trans instead of keeping it as
part of the TLVs buffer to avoid allocating extra space for it.
Needed for future changes.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Mon, 24 Jun 2019 07:37:05 +0000 (10:37 +0300)]
iwlwifi: dbg: add debug periphery registers to 9000 device family
Add debug HW periphery registers to 9000 device family.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Haim Dreyfuss [Thu, 13 Jun 2019 10:10:50 +0000 (13:10 +0300)]
iwlwifi: remove unused regdb_ptrs allocation
regdb_ptrs is not in used anymore, remove it.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Thu, 13 Jun 2019 12:01:07 +0000 (15:01 +0300)]
iwlwifi: dbg_ini: align dbg tlv functions names to a single format
align the naming to iwl_dbg_tlv_*
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ayala Beker [Mon, 17 Jun 2019 17:15:55 +0000 (20:15 +0300)]
iwlwifi: scan: don't pass large argument by value
Function iwl_mvm_scan_set_legacy_probe_req() second argument
size is too large to be passed by value.
Fix it to be passed by reference.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 11:56:14 +0000 (14:56 +0300)]
iwlwifi: remove pm_runtime completely
This means:
1) stop calling pm_runtime_resume when starting the hardware
2) removing the unneeded low_power parameter to start / stop hw / fw
transport ops
3) squashing transport functions that are now the same
_iwl_trans_pcie_start_hw / iwl_trans_pcie_start_hw
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 11:24:45 +0000 (14:24 +0300)]
iwlwifi: remove the d0i3 related module parameters
Those are now effectless.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 09:07:30 +0000 (12:07 +0300)]
iwlwifi: pcie: remove some more d0i3 code from the transport
CMD_SEND_IN_IDLE, CMD_MAKE_TRANS_IDLE and CMD_WAKE_UP_TRANS
are not used. Remove them.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:44:26 +0000 (11:44 +0300)]
iwlwifi: pcie: remove the refs / unrefs from the transport
This code is now stale
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:31:04 +0000 (11:31 +0300)]
iwlwifi: remove the opmode's d0i3 handlers
Remove the now unneeded functions that called those from the
transport layer.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:27:13 +0000 (11:27 +0300)]
iwlwifi: remove runtime_pm_mode
This is always set to IWL_PLAT_PM_MODE_DISABLED
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Alex Malamud [Mon, 10 Jun 2019 12:19:23 +0000 (15:19 +0300)]
iwlwifi: Set w-pointer upon resume according to SN
During D3 state, FW may send packets.
As a result, "write" queue pointer will be incremented by FW.
Upon resume from D3, driver should adjust its shadows of "write" and "read"
pointers to the value reported by FW.
1. Keep TID used during wowlan configuration.
2. Upon resume, set driver's "write" and "read" queue pointers
to the value reported by FW.
Signed-off-by: Alex Malamud <alex.malamud@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Tue, 11 Jun 2019 13:38:13 +0000 (15:38 +0200)]
iwlwifi: mvm: use FW thermal monitoring regardless of CONFIG_THERMAL
It doesn't make sense to use the FW thermal monitoring only if we
have CONFIG_THERMAL, because then we use the default thresholds
etc. which may be different from what the firmware implements, as
we don't maintain them in the driver now. Only the CTDP code needs
to actually be under CONFIG_THERMAL.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Mordechay Goodstein [Wed, 29 May 2019 12:39:07 +0000 (15:39 +0300)]
iwlwifi: mvm: name magic numbers with enum
It's hard to follow the numbers so rename it with enum
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ayala Beker [Thu, 23 May 2019 22:06:01 +0000 (01:06 +0300)]
iwlwifi: scan: add support for new scan request command version
Scan API was changed to support 6Ghz channels as well.
Support the new version.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Alex Malamud [Wed, 22 May 2019 10:49:18 +0000 (13:49 +0300)]
iwlwifi: LTR updates
New FW versions introduces LTR feature enablement by default.
For such FW versions, driver (mvm/xvt) should not send
host command to enable LTR feature, also it should be possible to
override LTR configuration through the debugfs.
1. Send LTR feature enablement command only for FW versions
which does not advertises SET_LTR_GEN2 capability.
2. Implement ltr_config file in debugfs for LTR configuration override.
Signed-off-by: Alex Malamud <alex.malamud@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:22:16 +0000 (11:22 +0300)]
iwlwifi: remove the code under IWLWIFI_PCIE_RTPM
This flag should never be set unless integration work with the
platform is done. We don't support any platforms officially and don't
plan to do so in the near future, so we can remove this option
entirely in order to avoid having it enabled by mistake.
This has been marked with "depends on EXPERT", so there shouldn't be
many systems running with it set. And, if there are systems, they
should not be using this flag.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:18:46 +0000 (11:18 +0300)]
iwlwifi: trans: remove suspending flag
This is set but never read.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:10:25 +0000 (11:10 +0300)]
iwlwifi: remove CMD_HIGH_PRIO
This flag is never set on any host command. Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:06:45 +0000 (11:06 +0300)]
iwlwifi: mvm: remove last leftovers of d0i3
We're now left with a status bit that is never set and a few
other leftovers.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:03:01 +0000 (11:03 +0300)]
iwlwifi: mvm: remove iwl_mvm_update_d0i3_power_mode
Also change the signature of the power functions that won't
receive d0i3=true anymore.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 08:00:09 +0000 (11:00 +0300)]
iwlwifi: mvm: remove d0i3_ap_sta_id
This variable read, but never set. Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 07:58:46 +0000 (10:58 +0300)]
iwlwifi: mvm: iwl_mvm_wowlan_config_key_params is for wowlan only
Now that d0i3 is dead, this function can't be called from d0i3
flows. Change its signature and make it static.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 07:47:33 +0000 (10:47 +0300)]
iwlwifi: mvm: remove the d0i3 entry/exit flow
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 07:41:17 +0000 (10:41 +0300)]
iwlwifi: mvm: remove the tx defer for d0i3
This is not needed anymore
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Tue, 11 Jun 2019 10:15:24 +0000 (13:15 +0300)]
iwlwifi: remove all the d0i3 references
As part of the d0i3 removal.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Thu, 6 Jun 2019 06:52:56 +0000 (09:52 +0300)]
iwlwifi: mvm: start to remove the code for d0i3
For runtime PM to work with d0i3 code, a lot of integration work needs
to be done with the platform (e.g. the out-of-band wake up interrupt)
and we currently don't have any platforms where this integration
happened. So, this code has been pretty much stale for a while and
when someone enables it, it just breaks things.
Therefore, to simplify the code base and make sure no one enables this
by mistake, we will remove the whole code.
This is only the very start, much more work is needed.
Remove the places where we check iwl_mvm_is_d0i3_supported
but leave all the refs, those will be removed in a different
patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shaul Triebitz [Tue, 4 Jun 2019 08:50:34 +0000 (11:50 +0300)]
iwlwifi: mvm: add the skb length to a print
When printing a TX, add to the print the length of the frame.
That will help with BSEP (buffer status report poll) tests.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Beker Ayala [Sun, 2 Jun 2019 10:55:44 +0000 (13:55 +0300)]
iwlwifi: mvm: fix scan config command size
Use the actual length of channels array and not the max capable length.
Signed-off-by: Beker Ayala <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Thu, 23 May 2019 05:39:27 +0000 (08:39 +0300)]
iwlwifi: add ldbg config cmd debug print
add support to print ldbg command in mvm and xvt mode
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Sun, 19 May 2019 07:52:59 +0000 (10:52 +0300)]
iwlwifi: dbg: support debug recording suspend resume command
Support the new DBGC_SUSPEND_RESUME command to change the recording state.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Wed, 22 May 2019 10:47:29 +0000 (13:47 +0300)]
iwlwifi: dbg: move debug recording stop from trans to op mode
The op mode should stop the debug recording and not the transport layer.
Rename iwl_fwrt_stop_device into iwl_fw_dbg_stop_sync and move the debug
stop recording to it.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Shahar S Matityahu [Tue, 21 May 2019 06:42:15 +0000 (09:42 +0300)]
iwlwifi: dbg: move monitor recording functionality from header file
The recording functions are quite big to be inline and the driver should
expose only the stop and restart functions that are allowed to be used
rather then the internal helper functions. Move the functions from the
header file.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Mon, 20 May 2019 09:26:16 +0000 (11:26 +0200)]
iwlwifi: mvm: remove unnecessary forward declarations
These static functions are only used after their definition,
so we don't need the forward declarations.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ilan Peer [Sun, 19 May 2019 11:56:31 +0000 (14:56 +0300)]
iwlwifi: mvm: Block 26-tone RU OFDMA transmissions
In case that there are OBSS that do not know how to properly
interpret 26-tone RU OFDMA transmissions, instruct the FW not
to use such transmissions.
The check is currently only performed upon association.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Tue, 21 May 2019 19:13:10 +0000 (22:13 +0300)]
iwlwifi: mvm: remove redundant condition in iwl_mvm_set_hw_rfkill_state
If mvm->fwrt.cur_fw_img != IWL_UCODE_INIT, then
rfkill_safe_init_done must be true since
rfkill_safe_init_done is set to true before we start to load
the runtime image.
Remove the redundant condition.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Ilia Lin [Tue, 14 May 2019 14:19:06 +0000 (17:19 +0300)]
iwlwifi: Send DQA enable command only if TVL is on
The newer targets don't support the DQA enablement command
and will return error status, while older targets need it.
The feature is defined by the corresponding TLV.
Send the command only if the TLV is enabled.
Signed-off-by: Ilia Lin <ilia.lin@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Wed, 10 Apr 2019 06:23:39 +0000 (09:23 +0300)]
iwlwifi: bump FW API to 49 for 22000 series
Start supporting API version 49 for 22000 series.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Kalle Valo [Fri, 6 Sep 2019 08:59:32 +0000 (11:59 +0300)]
Merge tag 'mt76-for-kvalo-2019-09-05' of https://github.com/nbd168/wireless
mt76 patches for 5.4
* beacon tx fix for mt76x02
* sparse/checkpatch warning fixes
* DFS pattern detector for mt7615 (DFS channels not enabled yet)
* CSA support for mt7615
* mt7615 cleanup/fixes
* mt7615 rate control improvements
* usb fixes
* mt7615 powersave buffering fix
* new device support for mt76x0
* support for more ciphers in mt7615
* watchdog time fixes
* smart carrier sense on mt7615
* survey support on mt7615
* multiple interfaces on mt76x02u
* calibration data fix for mt7615
* fix for sending BAR after disassoc
Lorenzo Bianconi [Mon, 2 Sep 2019 12:51:54 +0000 (14:51 +0200)]
mt76: mt7615: add support to read temperature from mcu
Introduce debugfs entry to read device temperature and related cmu
command. Introduce mt7615_mcu_parse_response to parse mcu response
messages and refactor mt7615_mcu_msg_send routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 28 Aug 2019 09:01:40 +0000 (11:01 +0200)]
mt76: mt7615: introduce mt7615_txwi_to_txp utility routine
Introduce mt7615_txwi_to_txp utility routine to convert mt76_txwi_cache
into mt7615_txp and remove duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
YueHaibing [Tue, 27 Aug 2019 13:44:45 +0000 (21:44 +0800)]
mt76: mt7603: use devm_platform_ioremap_resource() to simplify code
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 23 Aug 2019 08:52:17 +0000 (10:52 +0200)]
mt76: mt76x0: remove unneeded return value on set channel
We allways return 0 from mt76x0_phy_set_channel(), no need to pass
return value upward.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 23 Aug 2019 08:52:16 +0000 (10:52 +0200)]
mt76: mt76x0: remove redundant chandef copy
We set dev->mt76.chandef in mt76_set_channel() already.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stanislaw Gruszka [Fri, 23 Aug 2019 08:46:12 +0000 (10:46 +0200)]
mt76: make mt76_rx_convert static
mt76_rx_convert() not need to be exported any longer.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Aug 2019 08:08:56 +0000 (10:08 +0200)]
mt76: remove offchannel check in tx scheduling
tx queues are already disabled by mac80211 during scanning or other
off-channel activity. There is no need to repeat the check in mt76,
since scheduled queues are selected by mac80211 as well.
Signed-off-by: Balakrishna Bandi <b.balakrishna@globaledgesoft.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Aug 2019 07:37:41 +0000 (09:37 +0200)]
mt76: do not send BAR frame on tx aggregation flush stop
There is no need to send a BAR frame after stopping aggregation, and doing
so could lead to sending class 3 frames after deauthentication from an AP
Signed-off-by: Balakrishna Bandi <b.balakrishna@globaledgesoft.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 12 Aug 2019 13:48:53 +0000 (15:48 +0200)]
mt76: stop rx aggregation on station removal
Fixes use-after-free issues on forced station removal during hardware restart
on MT76x02
Fixes:
aee5b8cf2477 ("mt76: implement A-MPDU rx reordering in the driver code")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 12 Aug 2019 13:50:59 +0000 (15:50 +0200)]
mt76: dma: reset q->rx_head on rx reset
Fixes rx of the first frame if a fragmented rx was interrupted by the reset
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 21 Aug 2019 13:21:00 +0000 (15:21 +0200)]
mt76: mt7615: apply calibration-free data from OTP
MT7615 chips usually come pre-calibrated, even when used on embedded boards.
In that case, the on-flash EEPROM data needs to be merged with some data
from OTP ROM.
Run this merge if the external EEPROM data is valid and OTP has valid fields.
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Wed, 21 Aug 2019 08:00:19 +0000 (10:00 +0200)]
mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_complete
Introduce a default implementation for mt76_sw_scan and
mt76_sw_scan_complete in mt76 module and remove duplicated code
since most of the drivers share the same implementation
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ryder Lee [Wed, 21 Aug 2019 03:11:15 +0000 (11:11 +0800)]
mt76: fix some checkpatch warnings
This fixes the following checkpatch warnings:
CHECK: Alignment should match open parenthesis
CHECK: No space is necessary after a cast
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Tue, 20 Aug 2019 14:56:25 +0000 (16:56 +0200)]
mt76: mt7615: add BIP_CMAC_128 cipher support
Refactor mt7615_mac_wtbl_set_key and introduce
the following routines in order to configure wtbl entries
and properly add hw support to BIP_CMAC_128 cipher:
- mt7615_mac_wtbl_update_cipher
- mt7615_mac_wtbl_update_pk
- mt7615_mac_wtbl_update_key
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 9 Aug 2019 17:25:15 +0000 (19:25 +0200)]
mt76: mt7603: remove unnecessary mcu queue initialization
Remove unnecessary mcu queue initialization in mt7603_dma_init since it
has been already done in mt76_mmio_init
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 9 Aug 2019 17:06:02 +0000 (19:06 +0200)]
mt76: move mt76_tx_tasklet in mt76 module
Move mt76{15,03}_tx_tasklet in mt76_alloc_device in order to be used as
default tx_tasklet initialization. Remove duplicated code in
mt7603/mt7615 drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 5 Aug 2019 06:55:53 +0000 (08:55 +0200)]
mt76: mt7615: enable survey support
Introduce channel survey support for mt7615 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 5 Aug 2019 06:55:52 +0000 (08:55 +0200)]
mt76: mt7603: move survey_time in mt76_dev
Move survey_time field in mt76_dev in order to be reused adding survey
support to mt7615 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Mon, 5 Aug 2019 06:55:51 +0000 (08:55 +0200)]
mt76: mt76x02u: enable survey support
Introduce channel survey support for mt76x2u and mt76x0u drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 2 Aug 2019 14:36:20 +0000 (16:36 +0200)]
mt76: mt76x02u: enable multi-vif support
Enable multi-interface support for mt76x02u driver. For the moment
allow max two concurrent interfaces in order to preserve enough room
for ps traffic since we are using beacon slots for it.
I have successfully tested the following configuration:
- AP + STA
- AP0 + AP1
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 1 Aug 2019 08:26:23 +0000 (10:26 +0200)]
mt76: mt76x02: do not copy beacon skb in mt76x02_mac_set_beacon_enable
Do not copy beacon skb in mt76x02_mac_set_beacon_enable for usb devices
since it will be done in mt76x02_update_beacon_iter. Moreover squash
mt76x02_mac_set_beacon_enable and __mt76x02_mac_set_beacon_enable since
the latter is run just by mt76x02_mac_set_beacon_enable
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 1 Aug 2019 08:26:22 +0000 (10:26 +0200)]
mt76: mt76x02: introduce mt76x02_pre_tbtt_enable and mt76x02_beacon_enable macros
Improve code readability introducing mt76x02_pre_tbtt_enable and
mt76x02_beacon_enable utility macros
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>