OSDN Git Service
Yinghai Lu [Wed, 25 Aug 2010 20:39:16 +0000 (13:39 -0700)]
x86, memblock: Add get_free_all_memory_range()
get_free_all_memory_range is for CONFIG_NO_BOOTMEM=y, and will be called by
free_all_memory_core_early().
It will use early_node_map aka active ranges subtract memblock.reserved to
get all free range, and those ranges will convert to slab pages.
-v4: increase range size
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Yinghai Lu [Wed, 25 Aug 2010 20:39:15 +0000 (13:39 -0700)]
x86, memblock: Add memblock_x86_reserve_range/memblock_x86_free_range
They are wrappers for core versions, which take start/end/name instead
of base/size. This will make x86 conversion eaasier.
could add more debug print out
-v2: change get_max_mapped() to memblock.default_alloc_limit according to Michael
Ellerman and Ben
change to memblock_x86_reserve_range and memblock_x86_free_range according to Michael Ellerman
-v3: call check_and_double after reserve/free, so could avoid to use
find_memblock_area. Suggested by Michael Ellerman
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Yinghai Lu [Wed, 25 Aug 2010 20:39:15 +0000 (13:39 -0700)]
x86, memblock: Add memblock_x86_to_bootmem()
memblock_x86_to_bootmem() will reserve memblock.reserved.region in
bootmem after bootmem is set up.
We can use it to with all arches that support memblock later.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Yinghai Lu [Wed, 25 Aug 2010 20:39:15 +0000 (13:39 -0700)]
bootmem, x86: Add weak version of reserve_bootmem_generic
It will be used memblock_x86_to_bootmem converting
It is an wrapper for reserve_bootmem, and x86 64bit is using special one.
Also clean up that version for x86_64. We don't need to take care of numa
path for that, bootmem can handle it how
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Yinghai Lu [Wed, 25 Aug 2010 20:39:15 +0000 (13:39 -0700)]
x86, memblock: Add memblock_x86_find_in_range_size()
size is returned according free range.
Will be used to find free ranges for early_memtest and memory corruption check
Do not mess it up with lib/memblock.c yet.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Yinghai Lu [Wed, 25 Aug 2010 20:39:14 +0000 (13:39 -0700)]
memblock: Add memblock_free/reserve_reserved_regions()
So we can avoid export memblock_reserved_init_regions()
Suggested by Ben.
-v2: use __init_memblock attribute
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Yinghai Lu [Wed, 28 Jul 2010 05:38:40 +0000 (15:38 +1000)]
memblock: Add memblock_find_in_range()
This is a wrapper for memblock_find_base() using slightly different
arguments (start,end instead of start,size for example) in order to
make it easier to convert existing arch/x86 code.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Yinghai Lu [Wed, 28 Jul 2010 05:43:02 +0000 (15:43 +1000)]
memblock: Option for the architecture to put memblock into the .init section
Arch code can define ARCH_DISCARD_MEMBLOCK in asm/memblock.h,
which in turns causes memblock code and data to go respectively
into the .init and .initdata sections. This will be used by the
x86 architecture.
If ARCH_DISCARD_MEMBLOCK is defined, the debugfs files to inspect
the memblock arrays after boot are not created.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Yinghai Lu [Wed, 28 Jul 2010 05:28:21 +0000 (15:28 +1000)]
memblock: Protect memblock.h with CONFIG_HAVE_MEMBLOCK
This should make it easier to catch/debug incorrect use when
the CONFIG_ option isn't set.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 28 Jul 2010 05:25:10 +0000 (15:25 +1000)]
memblock: Make MEMBLOCK_ERROR be 0
And ensure we don't hand out 0 as a valid allocation. We put the
low limit at PAGE_SIZE arbitrarily.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Yinghai Lu [Wed, 28 Jul 2010 05:20:58 +0000 (15:20 +1000)]
memblock: Export MEMBLOCK_ERROR
will used by x86 memblock_x86_find_in_range_node and nobootmem replacement
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Yinghai Lu [Wed, 28 Jul 2010 05:13:22 +0000 (15:13 +1000)]
memblock: Improve debug output when resizing the reserve array
Print out the location info in addition to which array is being
resized. Also use memblocK_dbg() to put that under control of
the memblock_debug flag.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Yinghai Lu [Wed, 28 Jul 2010 05:07:21 +0000 (15:07 +1000)]
memblock: Expose some memblock bits for use by x86
This exposes memblock_debug and associated memblock_dbg() macro,
along with memblock_can_resize so that x86 can use these when
ported to use memblock
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:19 +0000 (15:39 -0700)]
memblock: Add debugfs files to dump the arrays content
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:18 +0000 (15:39 -0700)]
memblock: Make memblock_alloc_try_nid() fallback to MEMBLOCK_ALLOC_ANYWHERE
memblock_alloc_nid() used to fallback to allocating anywhere by using
memblock_alloc() as a fallback.
However, some of my previous patches limit memblock_alloc() to the region
covered by MEMBLOCK_ALLOC_ACCESSIBLE which is not quite what we want
for memblock_alloc_try_nid().
So we fix it by explicitely using MEMBLOCK_ALLOC_ANYWHERE.
Not that so far only sparc uses memblock_alloc_nid() and it hasn't been updated
to clamp the accessible zone yet. Thus the temporary "breakage" should have
no effect.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:17 +0000 (15:39 -0700)]
memblock: Separate memblock_alloc_nid() and memblock_alloc_try_nid()
The former is now strict, it will fail if it cannot honor the allocation
within the node, while the later implements the previous semantic which
falls back to allocating anywhere.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:16 +0000 (15:39 -0700)]
memblock: NUMA allocate can now use early_pfn_map
We now provide a default (weak) implementation of memblock_nid_range()
which uses the early_pfn_map[] if CONFIG_ARCH_POPULATES_NODE_MAP
is set. Sparc still needs to use its own method due to the way
the pages can be scattered between nodes.
This implementation is inefficient due to our main algorithm and
callback construct wanting to work on an ascending addresses bases
while early_pfn_map[] would rather work with nid's (it's unsorted
at that stage). But it should work and we can look into improving
it subsequently, possibly using arch compile options to chose a
different algorithm alltogether.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Mon, 12 Jul 2010 05:00:34 +0000 (15:00 +1000)]
memblock: Add "start" argument to memblock_find_base()
To constraint the search of a region between two boundaries,
which will be used by the new NUMA aware allocator among others.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:14 +0000 (15:39 -0700)]
memblock: Add arch function to control coalescing of memblock memory regions
Some archs such as ARM want to avoid coalescing accross things such
as the lowmem/highmem boundary or similar. This provides the option
to control it via an arch callback for which a weak default is provided
which always allows coalescing.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:13 +0000 (15:39 -0700)]
memblock: Add array resizing support
When one of the array gets full, we resize it. After much thinking and
a few iterations of that code, I went back to on-demand resizing using
the (new) internal memblock_find_base() function, which is pretty much what
Yinghai initially proposed, though there some differences in the details.
To work this relies on the default alloc limit being set sensibly by
the architecture.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Mon, 12 Jul 2010 04:36:48 +0000 (14:36 +1000)]
memblock: Move functions around into a more sensible order
Some shuffling is needed for doing array resize so we may as well
put some sense into the ordering of the functions in the whole memblock.c
file. No code change. Added some comments.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Mon, 12 Jul 2010 04:24:57 +0000 (14:24 +1000)]
memblock: split memblock_find_base() out of __memblock_alloc_base()
This will be used by the array resize code and might prove useful
to some arch code as well at which point it can be made non-static.
Also add comment as to why aligning size is important
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2. Fix loss of size alignment
v3. Fix result code
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:10 +0000 (15:39 -0700)]
memblock: Move memblock_init() to the bottom of the file
It's a real PITA to have to search for it in the middle
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:09 +0000 (15:39 -0700)]
memblock: Define MEMBLOCK_ERROR internally instead of using ~(phys_addr_t)0
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Mon, 12 Jul 2010 03:28:15 +0000 (13:28 +1000)]
memblock: Make memblock_find_region() out of memblock_alloc_region()
This function will be used to locate a free area to put the new memblock
arrays when attempting to resize them. memblock_alloc_region() is gone,
the two callsites now call memblock_add_region().
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
v2. Fix membase_alloc_nid_region() conversion
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:07 +0000 (15:39 -0700)]
memblock: Add debug markers at the end of the array
Since we allocate one more than needed, why not do a bit of sanity checking
here to ensure we don't walk past the end of the array ?
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:06 +0000 (15:39 -0700)]
memblock: Move memblock arrays to static storage in memblock.c and make their size a variable
This is in preparation for having resizable arrays.
Note that we still allocate one more than needed, this is unchanged from
the previous implementation.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 28 Jul 2010 04:31:29 +0000 (14:31 +1000)]
memblock: Remove memblock_type.size and add memblock.memory_size instead
Right now, both the "memory" and "reserved" memblock_type structures have
a "size" member. It represents the calculated memory size in the former
case and is unused in the latter.
This moves it out to the main memblock structure instead
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:04 +0000 (15:39 -0700)]
memblock: Remove unused memblock.debug struct member
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 03:34:42 +0000 (13:34 +1000)]
memblock: Change u64 to phys_addr_t
Let's not waste space and cycles on archs that don't support >32-bit
physical address space.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:02 +0000 (15:39 -0700)]
memblock: Remove rmo_size, burry it in arch/powerpc where it belongs
The RMA (RMO is a misnomer) is a concept specific to ppc64 (in fact
server ppc64 though I hijack it on embedded ppc64 for similar purposes)
and represents the area of memory that can be accessed in real mode
(aka with MMU off), or on embedded, from the exception vectors (which
is bolted in the TLB) which pretty much boils down to the same thing.
We take that out of the generic MEMBLOCK data structure and move it into
arch/powerpc where it belongs, renaming it to "RMA" while at it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:01 +0000 (15:39 -0700)]
memblock: Introduce default allocation limit and use it to replace explicit ones
This introduce memblock.current_limit which is used to limit allocations
from memblock_alloc() or memblock_alloc_base(..., MEMBLOCK_ALLOC_ACCESSIBLE).
The old MEMBLOCK_ALLOC_ANYWHERE changes value from 0 to ~(u64)0 and can still
be used with memblock_alloc_base() to allocate really anywhere.
It is -no-longer- cropped to MEMBLOCK_REAL_LIMIT which disappears.
Note to archs: I'm leaving the default limit to MEMBLOCK_ALLOC_ANYWHERE. I
strongly recommend that you ensure that you set an appropriate limit
during boot in order to guarantee that an memblock_alloc() at any time
results in something that is accessible with a simple __va().
The reason is that a subsequent patch will introduce the ability for
the array to resize itself by reallocating itself. The MEMBLOCK core will
honor the current limit when performing those allocations.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:39:00 +0000 (15:39 -0700)]
memblock: Expose MEMBLOCK_ALLOC_ANYWHERE
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:38:59 +0000 (15:38 -0700)]
memblock: Factor the lowest level alloc function
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:38:58 +0000 (15:38 -0700)]
memblock: Remove nid_range argument, arch provides memblock_nid_range() instead
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 03:52:55 +0000 (13:52 +1000)]
memblock: Remove memblock_find()
Nobody uses it anymore. It's semantics were ... weird
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 03:52:25 +0000 (13:52 +1000)]
memblock: Remove obsolete accessors
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Thu, 5 Aug 2010 02:55:55 +0000 (12:55 +1000)]
memblock/arm: Use new accessors
CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 03:43:53 +0000 (13:43 +1000)]
memblock/powerpc: Use new accessors
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 03:43:31 +0000 (13:43 +1000)]
memblock/sparc: Use new accessors
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 04:11:04 +0000 (14:11 +1000)]
memblock/sh: Use new accessors
CC: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 04:13:06 +0000 (14:13 +1000)]
memblock/microblaze: Use new accessors
CC: Michal Simek <monstr@monstr.eu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 03:40:38 +0000 (13:40 +1000)]
memblock: Introduce for_each_memblock() and new accessors
Walk memblock's using for_each_memblock() and use memblock_region_base/end_pfn() for
getting to PFNs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 04:09:23 +0000 (14:09 +1000)]
memblock/arm: Use memblock_region_is_memory() for omap fb
Instead of the deprecated memblock_find()
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 03:23:02 +0000 (13:23 +1000)]
memblock/arm: pfn_valid uses memblock_is_memory()
The implementation is pretty much similar. There is a -small- added
overhead by having another function call and the address shift.
If that becomes a concern, I suppose we could actually have memblock
itself expose a memblock_pfn_valid() which then ARM can use directly
with an appropriate #define...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 04:38:47 +0000 (14:38 +1000)]
memblock: Implement memblock_is_memory and memblock_is_region_memory
To make it fast, we steal ARM's binary search for memblock_is_memory()
and we use that to also the replace existing implementation of
memblock_is_reserved().
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Tue, 6 Jul 2010 22:38:56 +0000 (15:38 -0700)]
memblock: No reason to include asm/memblock.h late
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 04:06:41 +0000 (14:06 +1000)]
memblock: Rename memblock_region to memblock_type and memblock_property to memblock_region
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 4 Aug 2010 04:17:17 +0000 (14:17 +1000)]
memblock: Fix memblock_is_region_reserved() to return a boolean
All callers expect a boolean result which is true if the region
overlaps a reserved region. However, the implementation actually
returns -1 if there is no overlap, and a region index (0 based)
if there is.
Make it behave as callers (and common sense) expect.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Linus Torvalds [Tue, 3 Aug 2010 21:40:10 +0000 (14:40 -0700)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
GFS2: Fix recovery stuck bug (try #2)
GFS2: Fix typo in stuffed file data copy handling
Revert "GFS2: recovery stuck on transaction lock"
GFS2: Make "try" lock not try quite so hard
GFS2: remove dependency on __GFP_NOFAIL
GFS2: Simplify gfs2_write_alloc_required
GFS2: Wait for journal id on mount if not specified on mount command line
GFS2: Use nobh_writepage
Linus Torvalds [Tue, 3 Aug 2010 21:37:26 +0000 (14:37 -0700)]
Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6
* 'linux-next' of git://git.infradead.org/ubi-2.6:
UBI: do not warn unnecessarily
UBI: do not print message about corruptes PEBs if we have none of them
UBI: improve delete-compatible volumes handling
UBI: fix error message and compilation warnings
UBI: generate random image_seq when formatting MTD devices
UBI: improve ECC error message
UBI: improve corrupted flash handling
UBI: introduce eraseblock counter variables
UBI: introduce a new IO return code
UBI: simplify IO error codes
Linus Torvalds [Tue, 3 Aug 2010 21:37:02 +0000 (14:37 -0700)]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBIFS: fix a memory leak on error path.
UBIFS: fix GC LEB recovery
UBIFS: use ERR_CAST
UBIFS: check return code
Linus Torvalds [Tue, 3 Aug 2010 21:36:16 +0000 (14:36 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (22 commits)
9p: fix sparse warnings in new xattr code
fs/9p: remove sparse warning in vfs_inode
fs/9p: destroy fid on failed remove
fs/9p: Prevent parallel rename when doing fid_lookup
fs/9p: Add support user. xattr
net/9p: Implement TXATTRCREATE 9p call
net/9p: Implement attrwalk 9p call
9p: Implement LOPEN
fs/9p: This patch implements TLCREATE for 9p2000.L protocol.
9p: Implement TMKDIR
9p: Implement TMKNOD
9p: Define and implement TSYMLINK for 9P2000.L
9p: Define and implement TLINK for 9P2000.L
9p: Define and implement TLINK for 9P2000.L
9p: Implement client side of setattr for 9P2000.L protocol.
9p: getattr client implementation for 9P2000.L protocol.
fs/9p: Pass the correct user credentials during attach
net/9p: Handle the server returned error properly
9p: readdir implementation for 9p2000.L
9p: Make use of iounit for read/write
...
Linus Torvalds [Tue, 3 Aug 2010 21:33:38 +0000 (14:33 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (49 commits)
xfs simplify and speed up direct I/O completions
xfs: move aio completion after unwritten extent conversion
direct-io: move aio_complete into ->end_io
xfs: fix big endian build
xfs: clean up xfs_bmap_get_bp
xfs: simplify xfs_truncate_file
xfs: kill the b_strat callback in xfs_buf
xfs: remove obsolete osyncisosync mount option
xfs: clean up filestreams helpers
xfs: fix gcc 4.6 set but not read and unused statement warnings
xfs: Fix build when CONFIG_XFS_POSIX_ACL=n
xfs: fix unsigned underflow in xfs_free_eofblocks
xfs: use GFP_NOFS for page cache allocation
xfs: fix memory reclaim recursion deadlock on locked inode buffer
xfs: fix xfs_trans_add_item() lockdep warnings
xfs: simplify and remove xfs_ireclaim
xfs: don't block on buffer read errors
xfs: move inode shrinker unregister even earlier
xfs: remove a dmapi leftover
xfs: writepage always has buffers
...
Linus Torvalds [Tue, 3 Aug 2010 21:33:09 +0000 (14:33 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (29 commits)
cifs: fsc should not default to "on"
[CIFS] remove redundant path walking in dfs_do_refmount
cifs: ignore the "mand", "nomand" and "_netdev" mount options
cifs: map NT_STATUS_ERROR_WRITE_PROTECTED to -EROFS
cifs: don't allow cifs_iget to match inodes of the wrong type
[CIFS] relinquish fscache cookie before freeing CIFSTconInfo
cifs: add separate cred_uid field to sesInfo
fs: cifs: check kmalloc() result
[CIFS] Missing ifdef
[CIFS] Missing line from previous commit
[CIFS] Fix build break when CONFIG_CIFS_FSCACHE disabled
cifs: add mount option to enable local caching
cifs: read pages from FS-Cache
cifs: store pages into local cache
cifs: FS-Cache page management
cifs: define inode-level cache object and register them
cifs: define superblock-level cache index objects and register them
cifs: remove unused cifsUidInfo struct
cifs: clean up cifs_find_smb_ses (try #2)
cifs: match secType when searching for existing tcp session
...
Linus Torvalds [Tue, 3 Aug 2010 21:31:24 +0000 (14:31 -0700)]
Merge branch 'devel' of /home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits)
ARM: AMBA: Add pclk support to AMBA bus infrastructure
ARM: 6278/2: fix regression in RealView after the introduction of pclk
ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128
ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
ARM: 6244/1: mmci: add variant data and default MCICLOCK support
ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
ARM: 6274/1: add global control registers definition header file for nuc900
mx2_camera: fix type of dma buffer virtual address pointer
mx2_camera: Add soc_camera support for i.MX25/i.MX27
arm/imx/gpio: add spinlock protection
ARM: Add support for the LPC32XX arch
ARM: LPC32XX: Arch config menu supoport and makefiles
ARM: LPC32XX: Phytec 3250 platform support
ARM: LPC32XX: Misc support functions
ARM: LPC32XX: Serial support code
ARM: LPC32XX: System suspend support
ARM: LPC32XX: GPIO, timer, and IRQ drivers
ARM: LPC32XX: Clock driver
...
Helge Deller [Mon, 2 Aug 2010 20:46:41 +0000 (22:46 +0200)]
PARISC: led.c - fix potential stack overflow in led_proc_write()
avoid potential stack overflow by correctly checking count parameter
Reported-by: Ilja <ilja@netric.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthieu CASTET [Mon, 2 Aug 2010 09:36:06 +0000 (11:36 +0200)]
UBIFS: fix a memory leak on error path.
In 'mount_ubifs()', in case of 'ubifs_leb_unmap()' falure,
free allocated resources.
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Eric Van Hensbergen [Mon, 2 Aug 2010 16:36:18 +0000 (11:36 -0500)]
9p: fix sparse warnings in new xattr code
fixes:
CHECK fs/9p/xattr.c
fs/9p/xattr.c:73:6: warning: Using plain integer as NULL pointer
fs/9p/xattr.c:135:6: warning: Using plain integer as NULL pointer
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Eric Van Hensbergen [Tue, 27 Jul 2010 19:49:43 +0000 (14:49 -0500)]
fs/9p: remove sparse warning in vfs_inode
make v9fs_dentry_from_dir_inode static
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Aneesh Kumar K.V [Fri, 2 Jul 2010 06:51:20 +0000 (12:21 +0530)]
fs/9p: destroy fid on failed remove
9P spec says:
"It is correct to consider remove to be a clunk with the
side effect of removing the file if permissions allow. "
So even if remove fails we need to destroy the fid.
Without this patch an rmdir on a directory with contents leave
the new cloned directory fid fid attached to fidlist. On umount
we dump the fids on the fidlist
~# rmdir /mnt2/test4/
rmdir: failed to remove `/mnt2/test4/': Directory not empty
~# umount /mnt2/
~# dmesg
[ 228.474323] Found fid 3 not clunked
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Aneesh Kumar K.V [Wed, 30 Jun 2010 13:48:50 +0000 (19:18 +0530)]
fs/9p: Prevent parallel rename when doing fid_lookup
During fid lookup we need to make sure that the dentry->d_parent doesn't
change so that we can safely walk the parent dentries. To ensure that
we need to prevent cross directory rename during fid_lookup. Add a
per superblock rename_sem rw_semaphore to prevent parallel fid lookup and
rename.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Aneesh Kumar K.V [Mon, 31 May 2010 07:52:56 +0000 (13:22 +0530)]
fs/9p: Add support user. xattr
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Aneesh Kumar K.V [Mon, 31 May 2010 07:52:50 +0000 (13:22 +0530)]
net/9p: Implement TXATTRCREATE 9p call
TXATTRCREATE: Prepare a fid for setting xattr value on a file system object.
size[4] TXATTRCREATE tag[2] fid[4] name[s] attr_size[8] flags[4]
size[4] RXATTRCREATE tag[2]
txattrcreate gets a fid pointing to xattr. This fid can later be
used to set the xattr value.
flag value is derived from set Linux setxattr. The manpage says
"The flags parameter can be used to refine the semantics of the operation.
XATTR_CREATE specifies a pure create, which fails if the named attribute
exists already. XATTR_REPLACE specifies a pure replace operation, which
fails if the named attribute does not already exist. By default (no flags),
the extended attribute will be created if need be, or will simply replace
the value if the attribute exists."
The actual setxattr operation happens when the fid is clunked. At that point
the written byte count and the attr_size specified in TXATTRCREATE should be
same otherwise an error will be returned.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Aneesh Kumar K.V [Mon, 31 May 2010 07:52:45 +0000 (13:22 +0530)]
net/9p: Implement attrwalk 9p call
TXATTRWALK: Descend a ATTR namespace
size[4] TXATTRWALK tag[2] fid[4] newfid[4] name[s]
size[4] RXATTRWALK tag[2] size[8]
txattrwalk gets a fid pointing to xattr. This fid can later be
used to read the xattr value. If name is NULL the fid returned
can be used to get the list of extended attribute associated to
the file system object.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
M. Mohan Kumar [Tue, 22 Jun 2010 14:17:50 +0000 (19:47 +0530)]
9p: Implement LOPEN
Implement 9p2000.L version of open(LOPEN) interface in 9p client.
For LOPEN, no need to convert the flags to and from 9p mode to VFS mode.
Synopsis:
size[4] Tlopen tag[2] fid[4] mode[4]
size[4] Rlopen tag[2] qid[13] iounit[4]
[Fix mode bit format - jvrao@linux.vnet.ibm.com]
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>
Venkateswararao Jujjuri (JV) [Fri, 18 Jun 2010 01:27:46 +0000 (18:27 -0700)]
fs/9p: This patch implements TLCREATE for 9p2000.L protocol.
SYNOPSIS
size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4]
size[4] Rlcreate tag[2] qid[13] iounit[4]
DESCRIPTION
The Tlreate request asks the file server to create a new regular file with the
name supplied, in the directory (dir) represented by fid.
The mode argument specifies the permissions to use. New file is created with
the uid if the fid and with supplied gid.
The flags argument represent Linux access mode flags with which the caller
is requesting to open the file with. Protocol allows all the Linux access
modes but it is upto the server to allow/disallow any of these acess modes.
If the server doesn't support any of the access mode, it is expected to
return error.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
M. Mohan Kumar [Wed, 16 Jun 2010 08:57:22 +0000 (14:27 +0530)]
9p: Implement TMKDIR
Implement TMKDIR as part of 2000.L Work
Synopsis
size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4]
size[4] Rmkdir tag[2] qid[13]
Description
mkdir asks the file server to create a directory with given name,
mode and gid. The qid for the new directory is returned with
the mkdir reply message.
Note: 72 is selected as the opcode for TMKDIR from the reserved list.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
M. Mohan Kumar [Wed, 16 Jun 2010 08:57:01 +0000 (14:27 +0530)]
9p: Implement TMKNOD
Synopsis
size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4]
size[4] Rmknod tag[2] qid[13]
Description
mknod asks the file server to create a device node with given major and
minor number, mode and gid. The qid for the new device node is returned
with the mknod reply message.
[sripathik@in.ibm.com: Fix error handling code]
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Venkateswararao Jujjuri (JV) [Wed, 9 Jun 2010 22:59:31 +0000 (15:59 -0700)]
9p: Define and implement TSYMLINK for 9P2000.L
Create a symbolic link
SYNOPSIS
size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4]
size[4] Rsymlink tag[2] qid[13]
DESCRIPTION
Create a symbolic link named 'name' pointing to 'symtgt'.
gid represents the effective group id of the caller.
The permissions of a symbolic link are irrelevant hence it is omitted
from the protocol.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Reviewed-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Venkateswararao Jujjuri (JV) [Thu, 3 Jun 2010 22:16:59 +0000 (15:16 -0700)]
9p: Define and implement TLINK for 9P2000.L
This patch adds a helper function to get the dentry from inode and
uses it in creating a Hardlink
SYNOPSIS
size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s]
size[4] Rlink tag[2]
DESCRIPTION
Create a link 'newpath' in directory pointed by dfid linking to oldfid path.
[sripathik@in.ibm.com : p9_client_link should not free req structure
if p9_client_rpc has returned an error.]
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Eric Van Hensbergen [Mon, 2 Aug 2010 19:28:09 +0000 (14:28 -0500)]
9p: Define and implement TLINK for 9P2000.L
This patch adds a helper function to get the dentry from inode and
uses it in creating a Hardlink
SYNOPSIS
size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s]
size[4] Rlink tag[2]
DESCRIPTION
Create a link 'newpath' in directory pointed by dfid linking to oldfid path.
[sripathik@in.ibm.com : p9_client_link should not free req structure
if p9_client_rpc has returned an error.]
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Sripathi Kodi [Fri, 18 Jun 2010 06:20:10 +0000 (11:50 +0530)]
9p: Implement client side of setattr for 9P2000.L protocol.
SYNOPSIS
size[4] Tsetattr tag[2] attr[n]
size[4] Rsetattr tag[2]
DESCRIPTION
The setattr command changes some of the file status information.
attr resembles the iattr structure used in Linux kernel. It
specifies which status parameter is to be changed and to what
value. It is laid out as follows:
valid[4]
specifies which status information is to be changed. Possible
values are:
ATTR_MODE (1 << 0)
ATTR_UID (1 << 1)
ATTR_GID (1 << 2)
ATTR_SIZE (1 << 3)
ATTR_ATIME (1 << 4)
ATTR_MTIME (1 << 5)
ATTR_ATIME_SET (1 << 7)
ATTR_MTIME_SET (1 << 8)
The last two bits represent whether the time information
is being sent by the client's user space. In the absense
of these bits the server always uses server's time.
mode[4]
File permission bits
uid[4]
Owner id of file
gid[4]
Group id of the file
size[8]
File size
atime_sec[8]
Time of last file access, seconds
atime_nsec[8]
Time of last file access, nanoseconds
mtime_sec[8]
Time of last file modification, seconds
mtime_nsec[8]
Time of last file modification, nanoseconds
Explanation of the patches:
--------------------------
*) The kernel just copies relevent contents of iattr structure to
p9_iattr_dotl structure and passes it down to the client. The
only check it has is calling inode_change_ok()
*) The p9_iattr_dotl structure does not have ctime and ia_file
parameters because I don't think these are needed in our case.
The client user space can request updating just ctime by calling
chown(fd, -1, -1). This is handled on server side without a need
for putting ctime on the wire.
*) The server currently supports changing mode, time, ownership and
size of the file.
*) 9P RFC says "Either all the changes in wstat request happen, or
none of them does: if the request succeeds, all changes were made;
if it fails, none were."
I have not done anything to implement this specifically because I
don't see a reason.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Sripathi Kodi [Mon, 12 Jul 2010 14:37:23 +0000 (20:07 +0530)]
9p: getattr client implementation for 9P2000.L protocol.
SYNOPSIS
size[4] Tgetattr tag[2] fid[4] request_mask[8]
size[4] Rgetattr tag[2] lstat[n]
DESCRIPTION
The getattr transaction inquires about the file identified by fid.
request_mask is a bit mask that specifies which fields of the
stat structure is the client interested in.
The reply will contain a machine-independent directory entry,
laid out as follows:
st_result_mask[8]
Bit mask that indicates which fields in the stat structure
have been populated by the server
qid.type[1]
the type of the file (directory, etc.), represented as a bit
vector corresponding to the high 8 bits of the file's mode
word.
qid.vers[4]
version number for given path
qid.path[8]
the file server's unique identification for the file
st_mode[4]
Permission and flags
st_uid[4]
User id of owner
st_gid[4]
Group ID of owner
st_nlink[8]
Number of hard links
st_rdev[8]
Device ID (if special file)
st_size[8]
Size, in bytes
st_blksize[8]
Block size for file system IO
st_blocks[8]
Number of file system blocks allocated
st_atime_sec[8]
Time of last access, seconds
st_atime_nsec[8]
Time of last access, nanoseconds
st_mtime_sec[8]
Time of last modification, seconds
st_mtime_nsec[8]
Time of last modification, nanoseconds
st_ctime_sec[8]
Time of last status change, seconds
st_ctime_nsec[8]
Time of last status change, nanoseconds
st_btime_sec[8]
Time of creation (birth) of file, seconds
st_btime_nsec[8]
Time of creation (birth) of file, nanoseconds
st_gen[8]
Inode generation
st_data_version[8]
Data version number
request_mask and result_mask bit masks contain the following bits
#define P9_STATS_MODE 0x00000001ULL
#define P9_STATS_NLINK 0x00000002ULL
#define P9_STATS_UID 0x00000004ULL
#define P9_STATS_GID 0x00000008ULL
#define P9_STATS_RDEV 0x00000010ULL
#define P9_STATS_ATIME 0x00000020ULL
#define P9_STATS_MTIME 0x00000040ULL
#define P9_STATS_CTIME 0x00000080ULL
#define P9_STATS_INO 0x00000100ULL
#define P9_STATS_SIZE 0x00000200ULL
#define P9_STATS_BLOCKS 0x00000400ULL
#define P9_STATS_BTIME 0x00000800ULL
#define P9_STATS_GEN 0x00001000ULL
#define P9_STATS_DATA_VERSION 0x00002000ULL
#define P9_STATS_BASIC 0x000007ffULL
#define P9_STATS_ALL 0x00003fffULL
This patch implements the client side of getattr implementation for
9P2000.L. It introduces a new structure p9_stat_dotl for getting
Linux stat information along with QID. The data layout is similar to
stat structure in Linux user space with the following major
differences:
inode (st_ino) is not part of data. Instead qid is.
device (st_dev) is not part of data because this doesn't make sense
on the client.
All time variables are 64 bit wide on the wire. The kernel seems to use
32 bit variables for these variables. However, some of the architectures
have used 64 bit variables and glibc exposes 64 bit variables to user
space on some architectures. Hence to be on the safer side we have made
these 64 bit in the protocol. Refer to the comments in
include/asm-generic/stat.h
There are some additional fields: st_btime_sec, st_btime_nsec, st_gen,
st_data_version apart from the bitmask, st_result_mask. The bit mask
is filled by the server to indicate which stat fields have been
populated by the server. Currently there is no clean way for the
server to obtain these additional fields, so it sends back just the
basic fields.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>
Aneesh Kumar K.V [Tue, 1 Jun 2010 09:26:18 +0000 (09:26 +0000)]
fs/9p: Pass the correct user credentials during attach
We need to make sure we pass the right uid value
during attach. dotl is similar to dotu in this regard.
Without this mapped security model on dotl doesn't work
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Aneesh Kumar K.V [Tue, 1 Jun 2010 09:26:17 +0000 (09:26 +0000)]
net/9p: Handle the server returned error properly
We need to get the negative errno value in the kernel
even for dotl.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Sripathi Kodi [Fri, 4 Jun 2010 13:41:26 +0000 (13:41 +0000)]
9p: readdir implementation for 9p2000.L
This patch implements the kernel part of readdir() implementation for 9p2000.L
Change from V3: Instead of inode, server now sends qids for each dirent
SYNOPSIS
size[4] Treaddir tag[2] fid[4] offset[8] count[4]
size[4] Rreaddir tag[2] count[4] data[count]
DESCRIPTION
The readdir request asks the server to read the directory specified by 'fid'
at an offset specified by 'offset' and return as many dirent structures as
possible that fit into count bytes. Each dirent structure is laid out as
follows.
qid.type[1]
the type of the file (directory, etc.), represented as a bit
vector corresponding to the high 8 bits of the file's mode
word.
qid.vers[4]
version number for given path
qid.path[8]
the file server's unique identification for the file
offset[8]
offset into the next dirent.
type[1]
type of this directory entry.
name[256]
name of this directory entry.
This patch adds v9fs_dir_readdir_dotl() as the readdir() call for 9p2000.L.
This function sends P9_TREADDIR command to the server. In response the server
sends a buffer filled with dirent structures. This is different from the
existing v9fs_dir_readdir() call which receives stat structures from the server.
This results in significant speedup of readdir() on large directories.
For example, doing 'ls >/dev/null' on a directory with 10000 files on my
laptop takes 1.088 seconds with the existing code, but only takes 0.339 seconds
with the new readdir.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
M. Mohan Kumar [Fri, 4 Jun 2010 11:59:07 +0000 (11:59 +0000)]
9p: Make use of iounit for read/write
Change the v9fs_file_readn function to limit the maximum transfer size
based on the iounit or msize.
Also remove the redundant check for limiting the transfer size in
v9fs_file_write. This check is done by p9_client_write.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Dan Carpenter [Sat, 10 Jul 2010 09:51:54 +0000 (11:51 +0200)]
9p: strlen() doesn't count the terminator
This is an off by one bug because strlen() doesn't count the NULL
terminator. We strcpy() addr into a fixed length array of size
UNIX_PATH_MAX later on.
The addr variable is the name of the device being mounted.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Fang Wenqi [Tue, 1 Jun 2010 02:43:06 +0000 (02:43 +0000)]
virtio_9p.h needs <linux/types.h>
Found with makes headers_check:
include/linux/virtio_9p.h:15: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: Fang Wenqi <antonf@turbolinux.com.cn>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Alex Elder [Mon, 2 Aug 2010 15:24:57 +0000 (10:24 -0500)]
Merge branch 'v2.6.35'
Jeff Layton [Mon, 26 Jul 2010 18:25:08 +0000 (14:25 -0400)]
cifs: fsc should not default to "on"
I'm not sure why this was merged with this flag hardcoded on, but it
seems quite dangerous. Turn it off.
Also, mount.cifs hands unrecognized options off to the kernel so there
should be no need for changes there in order to support this.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Steve French [Mon, 26 Jul 2010 18:20:16 +0000 (18:20 +0000)]
[CIFS] remove redundant path walking in dfs_do_refmount
Reviewed-by: Dave Howells <dhowells@redhat.com>
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Mon, 26 Jul 2010 14:29:58 +0000 (10:29 -0400)]
cifs: ignore the "mand", "nomand" and "_netdev" mount options
These are all handled by the userspace mount programs, but older versions
of mount.cifs also handed them off to the kernel. Ignore them.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Mon, 26 Jul 2010 14:29:57 +0000 (10:29 -0400)]
cifs: map NT_STATUS_ERROR_WRITE_PROTECTED to -EROFS
Seems like a more sensible mapping than -EIO.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Mon, 19 Jul 2010 22:00:17 +0000 (18:00 -0400)]
cifs: don't allow cifs_iget to match inodes of the wrong type
If the type is different from what we think it should be, then don't
match the existing inode.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Steve French [Fri, 23 Jul 2010 20:37:53 +0000 (20:37 +0000)]
[CIFS] relinquish fscache cookie before freeing CIFSTconInfo
Doh, fix a use after free bug.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Mon, 19 Jul 2010 22:00:17 +0000 (18:00 -0400)]
cifs: add separate cred_uid field to sesInfo
Right now, there's no clear separation between the uid that owns the
credentials used to do the mount and the overriding owner of the files
on that mount.
Add a separate cred_uid field that is set to the real uid
of the mount user. Unlike the linux_uid, the uid= option does not
override this parameter. The parm is sent to cifs.upcall, which can then
preferentially use the creduid= parm instead of the uid= parm for
finding credentials.
This is not the only way to solve this. We could try to do all of this
in kernel instead by having a module parameter that affects what gets
passed in the uid= field of the upcall. That said, we have a lot more
flexibility to change things in userspace so I think it probably makes
sense to do it this way.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Kulikov Vasiliy [Fri, 16 Jul 2010 16:15:25 +0000 (20:15 +0400)]
fs: cifs: check kmalloc() result
If kmalloc() fails exit with -ENOMEM.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Steve French [Fri, 16 Jul 2010 04:31:02 +0000 (04:31 +0000)]
[CIFS] Missing ifdef
Signed-off-by: Steve French <sfrench@us.ibm.com>
Steve French [Fri, 16 Jul 2010 04:24:54 +0000 (04:24 +0000)]
[CIFS] Missing line from previous commit
CC: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Steve French [Fri, 16 Jul 2010 04:18:36 +0000 (04:18 +0000)]
[CIFS] Fix build break when CONFIG_CIFS_FSCACHE disabled
CC: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Suresh Jayaraman [Mon, 5 Jul 2010 12:43:36 +0000 (18:13 +0530)]
cifs: add mount option to enable local caching
Add a mount option 'fsc' to enable local caching on CIFS.
I considered adding a separate debug bit for caching, but it appears that
debugging would be relatively easier with the normal CIFS_INFO level.
As the cifs-utils (userspace) changes are not done yet, this patch enables
'fsc' by default to enable testing.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Suresh Jayaraman [Mon, 5 Jul 2010 12:43:25 +0000 (18:13 +0530)]
cifs: read pages from FS-Cache
Read pages from a FS-Cache data storage object into a CIFS inode.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Suresh Jayaraman [Mon, 5 Jul 2010 12:43:11 +0000 (18:13 +0530)]
cifs: store pages into local cache
Store pages from an CIFS inode into the data storage object associated with
that inode.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Suresh Jayaraman [Mon, 5 Jul 2010 12:43:00 +0000 (18:13 +0530)]
cifs: FS-Cache page management
Takes care of invalidation and release of FS-Cache marked pages and also
invalidation of the FsCache page flag when the inode is removed.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Suresh Jayaraman [Mon, 5 Jul 2010 12:42:45 +0000 (18:12 +0530)]
cifs: define inode-level cache object and register them
Define inode-level data storage objects (managed by cifsInodeInfo structs).
Each inode-level object is created in a super-block level object and is itself
a data storage object in to which pages from the inode are stored.
The inode object is keyed by UniqueId. The coherency data being used is
LastWriteTime, LastChangeTime and end of file reported by the server.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Suresh Jayaraman [Mon, 5 Jul 2010 12:42:27 +0000 (18:12 +0530)]
cifs: define superblock-level cache index objects and register them
Define superblock-level cache index objects (managed by cifsTconInfo structs).
Each superblock object is created in a server-level index object and in itself
an index into which inode-level objects are inserted.
The superblock object is keyed by sharename. The UniqueId/IndexNumber is used to
validate that the exported share is the same since we accessed it last time.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Wed, 7 Jul 2010 00:43:08 +0000 (20:43 -0400)]
cifs: remove unused cifsUidInfo struct
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Wed, 7 Jul 2010 00:43:02 +0000 (20:43 -0400)]
cifs: clean up cifs_find_smb_ses (try #2)
This patch replaces the earlier patch by the same name. The only
difference is that MAX_PASSWORD_SIZE has been increased to attempt to
match the limits that windows enforces.
Do a better job of matching sessions by authtype. Matching by username
for a Kerberos session is incorrect, and anonymous sessions need special
handling.
Also, in the case where we do match by username, we also need to match
by password. That ensures that someone else doesn't "borrow" an existing
session without needing to know the password.
Finally, passwords can be longer than 16 bytes. Bump MAX_PASSWORD_SIZE
to 512 to match the size that the userspace mount helper allows.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>